mibs/MIBS/enterasys/CTRON-SFPS-SFLSP-MIB

1509 lines
55 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CTRON-SFPS-SFLSP-MIB DEFINITIONS ::= BEGIN
-- sfps-sflsp-mib.txt
-- Revision: 0.0.06
--
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
--
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific Fast Packet Switching Services API MIB.
--
-- This module will be extended, as required.
--
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright October 93 Cabletron Systems
--
IMPORTS
OBJECT-TYPE
FROM RFC-1212
-- DisplayString
-- FROM RFC1213-MIB
-- enterprises,
TimeTicks,
IpAddress,
Counter,
Gauge
FROM RFC1155-SMI
-- These Objects are defined in the file sfps-inc.mib.txt.0.0.1
vlanSflspGeneralVariables, vlanSflspLsdb, vlanSflspInterfaces,
vlanSflspIfMetric, vlanSflspNeighbors, vlanSflspArea,
vlanSflsp1stHop, vlanSflspTracePathAPI, vlanSflspTracePathInternal,
vlanSflspLSDBFlood, vlanSflspLSPStats
FROM CTRON-SFPS-INCLUDE-MIB;
SfpsAddress ::= OCTET STRING (SIZE (6))
-- this will map to a MAC address
-- SFLSP
vlanSflspGeneralSwitchID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying the switch in the Switch Fabric.
By convention, to ensure uniqueness the first six bytes should default
to the base mac address and the last four bytes should default to zeroes."
::= { vlanSflspGeneralVariables 1 }
vlanSflspGeneralAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administrative status of the SFLSP in the switch. The value 'enabled'
denotes that the SFLSP Process is active on at least one interface; 'disabled'
disables it on all interfaces. "
::= { vlanSflspGeneralVariables 2 }
vlanSflspGeneralVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current version number of the SFLSP protocol is 2 "
::= { vlanSflspGeneralVariables 3 }
vlanSflspGeneralAreaBRStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag to note whether this switch is an area border switch "
::= { vlanSflspGeneralVariables 4 }
vlanSflspGeneralASBRStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag to note whether this switch is an Autonomous System border switch. "
::= { vlanSflspGeneralVariables 5 }
vlanSflspGeneralTOSSupport OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch's support for type-of-service switching. Currently, this
is set to false, indicating no type-of-service switching."
::= { vlanSflspGeneralVariables 6 }
vlanSflspGeneralOrgNewLSAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of new link-state advertisements that have been originated.
This number is incremented each time the switch originates a new LSA."
::= { vlanSflspGeneralVariables 7 }
vlanSflspGeneralRcvNewLSAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link-state advertisements received determined to be new.
instantiations. This number does not include newer instantiations of
self-originated link-state advertisements."
::= { vlanSflspGeneralVariables 8 }
vlanSflspGeneralMaxOnQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of events on the queue"
::= { vlanSflspGeneralVariables 9 }
vlanSflspGeneralCurOnQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of events on the queue"
::= { vlanSflspGeneralVariables 10 }
vlanSflspGeneralMaxTimeUs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum length of time to process events on the queue"
::= { vlanSflspGeneralVariables 11 }
vlanSflspGeneralCurTimeUs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current length of time to process events on the queue"
::= { vlanSflspGeneralVariables 12 }
vlanSflspGeneralMaxEvents OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of events processed at once"
::= { vlanSflspGeneralVariables 13 }
vlanSflspGeneralMaxTimeOccurred OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum length of time occurred at this time"
::= { vlanSflspGeneralVariables 14 }
vlanSflspGeneralMaxOnQOccurred OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of events on the queue occurred at this time"
::= { vlanSflspGeneralVariables 15 }
vlanSflspGeneralTotalSwLinks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Total number of switch links in our database"
::= { vlanSflspGeneralVariables 16 }
vlanSflspGeneralLastChangeDet OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Timestamp of last run of spf due to change detected in topology "
::= { vlanSflspGeneralVariables 17 }
vlanSflspGeneralFloodMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspGeneralVariables 18 }
vlanSflspGeneralLowestMac OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspGeneralVariables 19 }
vlanSflspGeneralRootId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspGeneralVariables 20 }
vlanSflspGeneralFloodAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspGeneralVariables 21 }
--LSDB
vlanSflspLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The SFLSP Process's Links State Database. "
::= { vlanSflspLsdb 1 }
vlanSflspLsdbEntry OBJECT-TYPE
SYNTAX VlanSflspLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Link State Advertisement"
INDEX { vlanSflspLsdbAreaID, vlanSflspLsdbType,
vlanSflspLsdbLSID, vlanSflspLsdbSwitchID }
::= { vlanSflspLsdbTable 1 }
VlanSflspLsdbEntry ::=
SEQUENCE {
vlanSflspLsdbAreaID INTEGER,
vlanSflspLsdbType INTEGER,
vlanSflspLsdbLSID OCTET STRING,
vlanSflspLsdbSwitchID OCTET STRING,
vlanSflspLsdbSequence INTEGER,
vlanSflspLsdbAge INTEGER,
vlanSflspLsdbChecksum INTEGER,
vlanSflspLsdbAdvertisement OCTET STRING,
vlanSflspLsdbUsedInSPF INTEGER
}
vlanSflspLsdbAreaID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32-bit identifier of the Area from which the LSA was received. "
::= { vlanSflspLsdbEntry 1 }
vlanSflspLsdbType OBJECT-TYPE
SYNTAX INTEGER {
switch-link(1),
connection-link(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the link state advertisement. Each link state type has a
seperate advertisement format. "
::= { vlanSflspLsdbEntry 2 }
vlanSflspLsdbLSID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field containing either
a switch ID or a switch port name; it identifies the piece of the
routing domain that is being described by the advertisement. "
::= { vlanSflspLsdbEntry 3 }
vlanSflspLsdbSwitchID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying the orignating switch in the Switch
Fabric. By convention, to ensure uniqueness the first six bytes should default
to the base mac address and the last four bytes should default to zeroes."
::= { vlanSflspLsdbEntry 4 }
vlanSflspLsdbSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit integer.
It is used to detect old and duplicate link state advertisements.
The space of sequence numbers is linearly ordered. The larger the
sequence numbers the more recent the advertisement. "
::= { vlanSflspLsdbEntry 5 }
vlanSflspLsdbAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state advertisement in seconds ."
::= { vlanSflspLsdbEntry 6 }
vlanSflspLsdbChecksum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents of the advertisement,
excepting the age field. The age field is excepted so that an advertisement's
age can be incremented without updating th checksum. The checksum used is the
same that is used for ISO connectionless datagrams; it is commonly referred to
as the Fletcher checksum. "
::= { vlanSflspLsdbEntry 7 }
vlanSflspLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The entire Link State Advertisement, including its header. "
::= { vlanSflspLsdbEntry 8 }
vlanSflspLsdbUsedInSPF OBJECT-TYPE
SYNTAX INTEGER {
-- false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { vlanSflspLsdbEntry 9 }
-- interfaces
vlanSflspInterfacesTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspInterfacesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The SFLSP Interface Table describes the interfaces from the
viewpoint of SFLSP. "
::= { vlanSflspInterfaces 1 }
vlanSflspInterfacesEntry OBJECT-TYPE
SYNTAX VlanSflspInterfacesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The SFLSP Interfaces Entry describes one interface from the
viewpoint of SFLSP "
INDEX { vlanSflspInterfacesIFAddress, vlanSflspInterfacesSwAddressLess }
::= { vlanSflspInterfacesTable 1 }
VlanSflspInterfacesEntry ::=
SEQUENCE {
vlanSflspInterfacesIFAddress SfpsAddress,
vlanSflspInterfacesSwAddressLess INTEGER,
vlanSflspInterfacesAreaID IpAddress,
vlanSflspInterfacesIfType INTEGER,
vlanSflspInterfacesAdminStatus INTEGER,
vlanSflspInterfacesSwPriority INTEGER,
vlanSflspInterfacesTransDelay INTEGER,
vlanSflspInterfacesReTransInterval INTEGER,
vlanSflspInterfacesHelloInterval INTEGER,
vlanSflspInterfacesDeadInterval INTEGER,
vlanSflspInterfacesPollInterval INTEGER,
vlanSflspInterfacesState INTEGER,
vlanSflspInterfacesDS SfpsAddress,
vlanSflspInterfacesBDS SfpsAddress,
vlanSflspInterfacesEvents Counter,
vlanSflspInterfacesAuthKey SfpsAddress
}
vlanSflspInterfacesIFAddress OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying the port address.
By convention, to ensure uniqueness the first six bytes should default
to the base mac address and the last four bytes should default to the
port number of the interface."
::= { vlanSflspInterfacesEntry 1 }
vlanSflspInterfacesSwAddressLess OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For the purpose of easing the instancing of addressed and
addressless interfaces; This variable takes the value 0 on
interfaces with IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address. "
::= { vlanSflspInterfacesEntry 2 }
vlanSflspInterfacesAreaID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying the area to which the
interface connects. Area ID 0.0.0.0 is used for the SFLSP backbone. "
::= { vlanSflspInterfacesEntry 3 }
vlanSflspInterfacesIfType OBJECT-TYPE
SYNTAX INTEGER {
brodcast(1),
nbma(2),
point-to-point(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SFLSP interface type. Currently all interfaces are handled as
broadcast type. "
::= { vlanSflspInterfacesEntry 4 }
vlanSflspInterfacesAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SFLSP interface's administrative status. The value 'enabled'
denotes that neighbor relationships may be formed on the interface, and the
interface will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is external to SFLSP. "
::= { vlanSflspInterfacesEntry 5 }
vlanSflspInterfacesSwPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority of this interface. Used in multi-access networks, this field
is used in the designated switch election algorithm. By default all switches
are eligible with a priority of 1. "
::= { vlanSflspInterfacesEntry 6 }
vlanSflspInterfacesTransDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The estimated number of seconds it takes to transmit a link-state update packet
over this interface. "
::= { vlanSflspInterfacesEntry 7 }
vlanSflspInterfacesReTransInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between link-state advertisement retransmissions, for
adjacencies belonging to this interface. This value is also used when re-
transmitting database description and link-state request packets. "
::= { vlanSflspInterfacesEntry 8 }
vlanSflspInterfacesHelloInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The lenght of time, in seconds, between the Hello packets that the switch sends
on the interface. This value must be the same for all switches attached to a
common network. "
::= { vlanSflspInterfacesEntry 9 }
vlanSflspInterfacesDeadInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds that a switch's Hello packets have not been seen
before it's neighbors declare the switch down. This should be some multiple of the
Hello interval. This value must be the same for all switches attached to a common network. "
::= { vlanSflspInterfacesEntry 10 }
vlanSflspInterfacesPollInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The larger time interval, in seconds, between the Hello packets sent to an
inactive non-broadcast multi-access neighbor. "
::= { vlanSflspInterfacesEntry 11 }
vlanSflspInterfacesState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
point-to-point(4),
dr(5),
bdr(6),
dr-other(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SFLSP Interface State. "
::= { vlanSflspInterfacesEntry 12 }
vlanSflspInterfacesDS OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string uniquely identifying the designated switch in the Switch Fabric.
By convention, to ensure uniqueness this should default to the base mac address."
::= { vlanSflspInterfacesEntry 13 }
vlanSflspInterfacesBDS OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string uniquely identifying the backup designated switch in the Switch Fabric.
By convention, to ensure uniqueness this should default to the base mac address."
::= { vlanSflspInterfacesEntry 14 }
vlanSflspInterfacesEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this SFLSP interface has changed its
state, or an error has occured. "
::= { vlanSflspInterfacesEntry 15 }
vlanSflspInterfacesAuthKey OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"THe Authentification Key. If the Area's Authorization Type is
simplePassword, and the key length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets. "
::= { vlanSflspInterfacesEntry 16 }
-- IfMetric
vlanSflspIfMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspIfMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The TOS metrics for a non-virtual interface indentified by the
interface index."
::= { vlanSflspIfMetric 1 }
vlanSflspIfMetricEntry OBJECT-TYPE
SYNTAX VlanSflspIfMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A particular TOS metric for a non-virtual interface identified by
the interface index."
INDEX { vlanSflspIfMetricIfAddress, vlanSflspIfMetricIfTOSType }
::= { vlanSflspIfMetricTable 1 }
VlanSflspIfMetricEntry ::=
SEQUENCE {
vlanSflspIfMetricIfAddress OCTET STRING,
vlanSflspIfMetricIfTOSType INTEGER,
vlanSflspIfMetricIfMetric INTEGER,
vlanSflspIfMetricIfStatus INTEGER
}
vlanSflspIfMetricIfAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying the port address.
By convention, to ensure uniqueness the first six bytes should default
to the base mac address and the last four bytes should default to the
port number of the interface."
::= { vlanSflspIfMetricEntry 1 }
vlanSflspIfMetricIfTOSType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of service metric being referenced. On row creation, this can be
derived from the instance.."
::= { vlanSflspIfMetricEntry 2 }
vlanSflspIfMetricIfMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using this type of service on this interface. The default value of the
TOS 0 Metric is 10^8 / ifSpeed.
The value FFFF is distinguished to mean 'no route via this TOS'. "
::= { vlanSflspIfMetricEntry 3 }
vlanSflspIfMetricIfStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable displays the validity or invalidity of the entry.
Setting it to 'invalid' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent "
::= { vlanSflspIfMetricEntry 4 }
-- Neighbors
vlanSflspNeighborsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspNeighborsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of non-virtual neighbor information ."
::= { vlanSflspNeighbors 1 }
vlanSflspNeighborsEntry OBJECT-TYPE
SYNTAX VlanSflspNeighborsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The information regarding a single neighbor. "
INDEX { vlanSflspNeighborsPortName }
::= { vlanSflspNeighborsTable 1 }
VlanSflspNeighborsEntry ::=
SEQUENCE {
vlanSflspNeighborsPortName OCTET STRING,
vlanSflspNeighborsSwitchID OCTET STRING,
vlanSflspNeighborsOptions INTEGER,
vlanSflspNeighborsPriority INTEGER,
vlanSflspNeighborsState INTEGER,
vlanSflspNeighborsEvents Counter,
vlanSflspNeighborsLSRetransQLen Gauge,
vlanSflspNeighborsHELLOsRcvd INTEGER,
vlanSflspNeighborsDBDsRcvd INTEGER,
vlanSflspNeighborsLSUsRcvd INTEGER,
vlanSflspNeighborsLSRsRcvd INTEGER,
vlanSflspNeighborsLSACKsRcvd INTEGER,
vlanSflspNeighborsHELLOsSent INTEGER,
vlanSflspNeighborsDBDsSent INTEGER,
vlanSflspNeighborsLSUsSent INTEGER,
vlanSflspNeighborsLSRsSent INTEGER,
vlanSflspNeighborsLSACKsSent INTEGER,
vlanSflspNeighborsNBMAStatus INTEGER,
vlanSflspNeighborsFULLTimeSec TimeTicks
}
vlanSflspNeighborsPortName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying the neighbor's port address.
By convention, to ensure uniqueness the first six bytes should default
to the base mac address and the last four bytes should default to the
port number of the neighbor's interface."
::= { vlanSflspNeighborsEntry 1 }
vlanSflspNeighborsSwitchID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string uniquely identifying the neighboring switch in the Switch Fabric.
By convention, to ensure uniqueness this should default to the base mac address."
::= { vlanSflspNeighborsEntry 2 }
vlanSflspNeighborsOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit Mask corresponding to the neighbor's options field.
Bit 0, if set, indicates that the area accepts and operates
on external information; if zero, it is a stub area.
Bit 1, if set, indicates that the system will operate on Type
of Service metrics other than TOS 0. If zero, the neighbor
will ignore all metrics except the TOS 0 metric ."
::= { vlanSflspNeighborsEntry 3 }
vlanSflspNeighborsPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The priority of this neighbor in the designated switch election
algorithm. The value 0 signifies that the neighbor is not eligible
to become the designated switch on this particular network."
::= { vlanSflspNeighborsEntry 4 }
vlanSflspNeighborsState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
two-way(4),
exchange(5),
exchange-start(6),
loading(7),
full(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The State of the relationship with this Neighbor."
::= { vlanSflspNeighborsEntry 5 }
vlanSflspNeighborsEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this neighbor relationship has
changed state, or an error has occurred. "
::= { vlanSflspNeighborsEntry 6 }
vlanSflspNeighborsLSRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current length of the retransmission queue."
::= { vlanSflspNeighborsEntry 7 }
vlanSflspNeighborsHELLOsRcvd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets received from this neighbor"
::= { vlanSflspNeighborsEntry 8 }
vlanSflspNeighborsDBDsRcvd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of database description packets received from this neighbor"
::= { vlanSflspNeighborsEntry 9 }
vlanSflspNeighborsLSUsRcvd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state update packets received from this neighbor"
::= { vlanSflspNeighborsEntry 10 }
vlanSflspNeighborsLSRsRcvd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state request packets received from this neighbor"
::= { vlanSflspNeighborsEntry 11 }
vlanSflspNeighborsLSACKsRcvd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state acknowledgement packets received from this neighbor"
::= { vlanSflspNeighborsEntry 12 }
vlanSflspNeighborsHELLOsSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets sent to this neighbor"
::= { vlanSflspNeighborsEntry 13 }
vlanSflspNeighborsDBDsSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of database description packets sent to this neighbor"
::= { vlanSflspNeighborsEntry 14 }
vlanSflspNeighborsLSUsSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state update packets sent to this neighbor"
::= { vlanSflspNeighborsEntry 15 }
vlanSflspNeighborsLSRsSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state request packets sent to this neighbor"
::= { vlanSflspNeighborsEntry 16 }
vlanSflspNeighborsLSACKsSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link state acknowledgement packets sent to this neighbor"
::= { vlanSflspNeighborsEntry 17 }
vlanSflspNeighborsNBMAStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The variable displays the validity or invalidity of the
entry. Setting it to 'invalid' has the effect of rendering
it inoperative. The internal effect (row removal) is implementation
dependant."
::= { vlanSflspNeighborsEntry 18 }
vlanSflspNeighborsFULLTimeSec OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor went to FULL state at this time "
::= { vlanSflspNeighborsEntry 19 }
-- Area
vlanSflspAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of the switches attached areas."
::= { vlanSflspArea 1 }
vlanSflspAreaEntry OBJECT-TYPE
SYNTAX VlanSflspAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of one of the switches attached
areas."
INDEX { vlanSflspAreaAreaID }
::= { vlanSflspAreaTable 1 }
VlanSflspAreaEntry ::=
SEQUENCE {
vlanSflspAreaAreaID IpAddress,
vlanSflspAreaAuthType INTEGER,
vlanSflspAreaSPFRuns Counter,
vlanSflspAreaABRCount Gauge,
vlanSflspAreaASBRCount Gauge,
vlanSflspAreaAreaLSACnt Gauge,
vlanSflspAreaAreaCheckSum INTEGER,
vlanSflspAreaLastSpfRun TimeTicks
}
vlanSflspAreaAreaID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 10 byte octet string uniquely identifying an area."
::= { vlanSflspAreaEntry 1 }
vlanSflspAreaAuthType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The authentication type specified for an area.
Additional authentication types may be assigned locally
on a per Area basis."
::= { vlanSflspAreaEntry 2 }
vlanSflspAreaSPFRuns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times that the intra-area route table
has been calculated using this area's link-state
database. This is typically done using Dijkstra's
algorithm."
::= { vlanSflspAreaEntry 3 }
vlanSflspAreaABRCount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of area border switches reachable
within this area. This is initially zero, and is
calculated in each SPF Pass."
::= { vlanSflspAreaEntry 4 }
vlanSflspAreaASBRCount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Autonomous System border switches
reachable within this area. This is initially zero,
and is calculated in each LSP Pass."
::= { vlanSflspAreaEntry 5 }
vlanSflspAreaAreaLSACnt OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of link-state advertisements in this
area's link-state database, excluding AS External LSA's"
::= { vlanSflspAreaEntry 6 }
vlanSflspAreaAreaCheckSum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32-bit unsigned sum of the link-state
advertisements' LS checksums contained in this area's
link-state database. This sum excludes external (LS
type 5) link-state advertisements. The sum can be used
to determine if there has been a change in a switches
link state database, and to compare the link-state
database of two switches."
::= { vlanSflspAreaEntry 7 }
vlanSflspAreaLastSpfRun OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp of last run of spf"
::= { vlanSflspAreaEntry 8 }
-- 1stHop
vlanSflsp1stHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflsp1stHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the SecureFast path next-hop table. It
reports various information about the next switch port
address on the path to a particular destination switch
port address."
::= { vlanSflsp1stHop 1 }
vlanSflsp1stHopEntry OBJECT-TYPE
SYNTAX VlanSflsp1stHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes the next hop switch port addresses for
each destination switch port address."
INDEX { vlanSflsp1stHopDestSwitch }
::= { vlanSflsp1stHopTable 1 }
VlanSflsp1stHopEntry ::=
SEQUENCE {
vlanSflsp1stHopDestSwitch OCTET STRING,
vlanSflsp1stHopPath11stHop OCTET STRING,
vlanSflsp1stHopPath21stHop OCTET STRING,
vlanSflsp1stHopPath31stHop OCTET STRING
}
vlanSflsp1stHopDestSwitch OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the index to the table, representing destination
switch port addresses for each port address within
the switch fabric."
::= { vlanSflsp1stHopEntry 1 }
vlanSflsp1stHopPath11stHop OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 1st hop of the 1st path to the destination switch"
::= { vlanSflsp1stHopEntry 2 }
vlanSflsp1stHopPath21stHop OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 1st host of the 2nd path to the destination switch"
::= { vlanSflsp1stHopEntry 3 }
vlanSflsp1stHopPath31stHop OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 1st hop of the 3rd path to the destination switch"
::= { vlanSflsp1stHopEntry 4 }
-- Trace Path
vlanSflspTracePathAPIDest OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the switch address for which a path list will be
requested in the sfTracePathTable."
::= { vlanSflspTracePathAPI 1 }
vlanSflspTracePathAPIID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an ID to uniquely identify the path list request
in the sfTracePathTable."
::= { vlanSflspTracePathAPI 2 }
vlanSflspTracePathAPIType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administrative control of the trace path request entry in
the sfTracePathTable. It is used to create or delete a trace
path request entry."
::= { vlanSflspTracePathAPI 3 }
vlanSflspTracePathAPIAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
activate(2),
suspend(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to be performed by the trace path request entry
in the sfTracePathTable."
::= { vlanSflspTracePathAPI 4 }
-- Trace Path
vlanSflspTracePathTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspTracePathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows the determination of paths to known
destinations using the same internal methods used by the
switch to program these paths. It is indexed by
destination switch address and a request identifier.
If successful, the resulting path, which consists of a
list of switch port addresses, is reported in the
sfTracePathReqHopTable."
::= { vlanSflspTracePathInternal 1 }
vlanSflspTracePathEntry OBJECT-TYPE
SYNTAX VlanSflspTracePathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An SF Trace Path Table entry containing objects for a
particular destination switch."
INDEX { vlanSflspTracePathDest, vlanSflspTracePathID }
::= { vlanSflspTracePathTable 1 }
VlanSflspTracePathEntry ::=
SEQUENCE {
vlanSflspTracePathDest OCTET STRING,
vlanSflspTracePathID INTEGER,
vlanSflspTracePathAction INTEGER,
vlanSflspTracePathStatus INTEGER
}
vlanSflspTracePathDest OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch address of the requested destination."
::= { vlanSflspTracePathEntry 1 }
vlanSflspTracePathID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique identifier for this path request."
::= { vlanSflspTracePathEntry 2 }
vlanSflspTracePathAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
activate(2),
suspend(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to be performed by this trace path entry."
::= { vlanSflspTracePathEntry 3 }
vlanSflspTracePathStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
success(2),
failed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The results of a trace path request. A result of success(4)
means the device has determined at least one path to the
destination."
::= { vlanSflspTracePathEntry 4 }
-- Trace Path List
vlanSflspTracePathListTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspTracePathListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the SecureFast Trace Path List table."
::= { vlanSflspTracePathInternal 2 }
vlanSflspTracePathListEntry OBJECT-TYPE
SYNTAX VlanSflspTracePathListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the switch port addresses of each hop
of each path traversed for a particular destination switch.
These paths correspond to trace path requests in the
sfTracePathReqTable."
INDEX { vlanSflspTracePathListDest, vlanSflspTracePathListID, vlanSflspTracePathListPathNum, vlanSflspTracePathListHopNum }
::= { vlanSflspTracePathListTable 1 }
VlanSflspTracePathListEntry ::=
SEQUENCE {
vlanSflspTracePathListDest OCTET STRING,
vlanSflspTracePathListID INTEGER,
vlanSflspTracePathListPathNum INTEGER,
vlanSflspTracePathListHopNum INTEGER,
vlanSflspTracePathListHopAddr OCTET STRING
}
vlanSflspTracePathListDest OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch address of the destination for this trace path
entry, corresponding to a requested destination in the
sfTracePathReqTable."
::= { vlanSflspTracePathListEntry 1 }
vlanSflspTracePathListID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique identifier corresponding to the identifier in a
trace path request in the sfTracePathReqTable."
::= { vlanSflspTracePathListEntry 2 }
vlanSflspTracePathListPathNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of this path in the table of networks traversed.
This value represents a unique path id when there are multiple
paths to a single destination."
::= { vlanSflspTracePathListEntry 3 }
vlanSflspTracePathListHopNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hop number in this path."
::= { vlanSflspTracePathListEntry 4 }
vlanSflspTracePathListHopAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch port address of this hop on the path."
::= { vlanSflspTracePathListEntry 5 }
--
vlanSflspLSDBFloodTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSflspLSDBFloodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFlood 1 }
vlanSflspLSDBFloodEntry OBJECT-TYPE
SYNTAX VlanSflspLSDBFloodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { vlanSflspLSDBFloodAreaID, vlanSflspLSDBFloodType, vlanSflspLSDBFloodLSID, vlanSflspLSDBFloodAdvSwitchID }
::= { vlanSflspLSDBFloodTable 1 }
VlanSflspLSDBFloodEntry ::=
SEQUENCE {
vlanSflspLSDBFloodAreaID INTEGER,
vlanSflspLSDBFloodType INTEGER,
vlanSflspLSDBFloodLSID SfpsAddress,
vlanSflspLSDBFloodAdvSwitchID SfpsAddress,
vlanSflspLSDBFloodSequence INTEGER,
vlanSflspLSDBFloodAge INTEGER,
vlanSflspLSDBFloodChecksum INTEGER,
vlanSflspLSDBFloodAdvertisement SfpsAddress,
vlanSflspLSDBFloodUsedInSPF INTEGER,
vlanSflspLSDBFloodEverUsed INTEGER
}
vlanSflspLSDBFloodAreaID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 1 }
vlanSflspLSDBFloodType OBJECT-TYPE
SYNTAX INTEGER {
switchLink(1),
connectionLink(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 2 }
vlanSflspLSDBFloodLSID OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 3 }
vlanSflspLSDBFloodAdvSwitchID OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 4 }
vlanSflspLSDBFloodSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 5 }
vlanSflspLSDBFloodAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 6 }
vlanSflspLSDBFloodChecksum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 7 }
vlanSflspLSDBFloodAdvertisement OBJECT-TYPE
SYNTAX SfpsAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 8 }
vlanSflspLSDBFloodUsedInSPF OBJECT-TYPE
SYNTAX INTEGER {
-- false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 9 }
vlanSflspLSDBFloodEverUsed OBJECT-TYPE
SYNTAX INTEGER {
-- false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSDBFloodEntry 10 }
--SFLSP Statistics
vlanSflspLSPStatsMaxOnQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 1 }
vlanSflspLSPStatsCurOnQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 2 }
vlanSflspLSPStatsMaxTimeUs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 3 }
vlanSflspLSPStatsCurTimeUs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 4 }
vlanSflspLSPStatsMaxTimeOccurred OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 5 }
vlanSflspLSPStatsMaxOnQOccurred OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 6 }
vlanSflspLSPStatsTotalSwLinks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 7 }
vlanSflspLSPStatsLastChangeDet OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 8 }
vlanSflspLSPStatsNumSPFRuns OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 9 }
vlanSflspLSPStatsNumFULLNbrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 10 }
vlanSflspLSPStatsNumIntfs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 11 }
vlanSflspLSPStatsNum1stHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 12 }
vlanSflspLSPStatsNumUpdates OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 13 }
vlanSflspLSPStatsLastUpdateRecvd OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanSflspLSPStats 14 }
END