david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/enterasys/CTRON-SSR-HARDWARE-MIB

795 lines
28 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CTRON-SSR-HARDWARE-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for Cabletron's
-- enterprise-specific schema to access SSR Hardware configuration.
--
-- This module will be extended, as required.
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright June 1998-2000 Cabletron Systems
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter64, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ssrMibs
FROM CTRON-SSR-SMI-MIB;
hardwareMIB MODULE-IDENTITY
LAST-UPDATED "200007170000Z" -- July 17, 2000
ORGANIZATION
"Cabletron Systems, Inc."
CONTACT-INFO
"Enterasys Networks
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-0505
(603) 332-9400
support@enterasys.com
http://www.enterasys.com"
DESCRIPTION
"This module defines a schema to access SSR hardware configuration."
REVISION "200007170000Z"
DESCRIPTION
"Add support for the Smart Switch 6000 2 Port Gigabit Backplane module
to the SSRModuleType for the Enterasys SSR product line"
REVISION "200007150000Z"
DESCRIPTION
"Update contact information. This mib is found on Riverstone Networks RS product line
as well as Enterasys SSR product line"
REVISION "200005310000Z"
DESCRIPTION
"Modify SSRPortConnectorType for GBIC connector in 4.0 and update sysHwModuleService
by appending the board serial number for 4.0 for RS-32000."
REVISION "200003200000Z"
DESCRIPTION
"Add Firmware 4.0 support. 3200 series modules, gigabit modules with GBIC support."
REVISION "9912300000Z"
DESCRIPTION
"Add Firmware 3.1 support. 16 port 10/100 TX, Gigabit over Copper, ATM OC-3, POS OC3/12."
REVISION "9901200000Z"
DESCRIPTION
"Add Firmware 3.0 support. Add Backup control module status and last Hotswap event."
REVISION "9808040000Z"
DESCRIPTION
"First Revision of SSR Hardware mib. "
::= { ssrMibs 200 }
-- InterfaceIndex contains the semantics of ifIndex and
-- should be used for any objects defined on other mib
-- modules that need these semantics.
SSRInterfaceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface
or interface sub-layer in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
SYNTAX INTEGER (0..65535)
SSRModuleType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each module
type supported by the SSR series of products."
SYNTAX INTEGER {
controlModule(1), -- The Control Module type I
ether100TX(2), -- 10 or 100 Mbps Ethernet, 8 port RJ45
ether100FX(3), -- 100 Mbps Ethernet Fiber
gigabitSX(4), -- Gigabit SX Fiber (1000 Mbps Ethernet)
gigabitLX(5), -- Gigabit LX Fiber (1000 Mbps Ethernet)
serial4port(6), -- WAN DS1 speed 4 ports
hssi(7), -- WAN DS3 speed 2 ports
unknown(8), -- unknown module detected
gigabitLLX(9), -- Gigabit LLX Fiber (1000 Mbps Ethernet) 2 port
none(10), -- no card present in slot
controlModule2(11), -- Control Module type II (Elan)
gigabitLLX2P(12), -- Gigabit LLX Fiber (1000 Mbps Ethernet) 1 port
serial2port(13), -- WAN DS1 2 ports
cmts1x4port(15), -- Cable Modem Termination System 1 downstream 4 upstream
fddi2port(16),
controlModule3(17), -- Control Module type III (Esprit)
serial4portCE(20), -- WAN 4 port Serial Compression & Encrpytion
ether100TX16port(21), -- 10 or 100 Mbps Ethernet 16 port
gigabitTX(22), -- Gigabit SX TX (1000 Mbps Ethernet over copper)
atm155(24), -- ATM 1.5-155 2 port with modular physical port connectors
sonet4PortOc3(25), -- Packet over SONET 4 ports Oc3
sonet2PortOc12(26), -- Packet over SONET 2 ports Oc12
gigabitFX4P(27), -- 4 Port Gigabit Ethernet short haul
gigabitFX4PGBIC(28), -- 4 Port Gigabit Ethernet with modular physical port connectors
gigabitFX2PGBIC(29), -- 2 Port Gigabit Ethernet with modular physical port connectors
gigabit6K2PBP(30), -- 2 Port Gigabit SS6000 Backplane port
-- 32000 chasss modules
rbGigabit8PGBIC(503), -- 8 Port Gigabit Ethernet with modular physical port connectors
rbGigabit4PGBIC(504), -- 4 Port Gigabit Ethernet with modular physical port connectors
rbEther100TX24P(505), -- 24 Port 10/100 Mbps Ethernet RJ45
rbEther100TC32P(506), -- 32 Port 10/100 Mbps Ethernet Telco
rbControlModule(507) -- 32000 Control Module
}
SSRModuleStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Current state of module. online indicates the normal state. Offline indicates a powered off or failed
module. Modules may be powered off prior to hot swap."
SYNTAX INTEGER {
online(1), -- Module working normally
offline(2) -- Module is powered off
}
SSRPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each physical port
type supported by the SSR series of products."
SYNTAX INTEGER {
etherFast(1), -- 10 Mbps Ethernet or 100 Mbps Fast Ethernet capable port
gigEther(2), -- Gigabit (1000 Mbps Ethernet)
hssi(3), -- WAN HSSI Interface
serial(4), -- WAN T1 High Speed Serial Interface
unknown(5), -- unknown Port Type
sonet(6), -- Synchronous Optical Network Interface
ds1(7), -- Digital Signal 1 aka T1
ds3(8), -- Digital Signal 3 aka T3
cmt(9), -- Cable Modem Termination Interface
e1(10), -- E1 Digital Signal
e3(11), -- E3 Digital Signal
fddi(12) -- FDDI port
}
SSRPortConnectorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each physical port
type supported by the SSR series of products"
SYNTAX INTEGER {
empty(0), -- Used for GBIC, No GBIC ( empty)
db9m(1), -- DB-9 Male connector
db9f(2), -- DB-9 Female connector
db15m(3), -- DB-15 Male connector
db15f(4), -- DB-15 Female connector
db25m(5), -- DB-25 Male connector
db25f(6), -- DB-25 Female connector
rj11(7), -- RJ-11 type jack
rj45(8), -- RJ-45 type jack, also known as MJ-8
aui(9), -- AUI connector
ftypef(10), -- CATV F-Type Female connector
fiberScMM(11), -- Fiber optics SC connector MultiMode, female connector
v35(12), -- V.35 shared 60 pin connector, female connector
eia530(13), -- EIA 530 shared 60 pin connector, female connector
rs44x(14), -- RS-449/442 shared 60 pin connector, female connector
x21(15), -- X.21 shared 60 pin connector, female connector
hssi(16), -- HSSI 50 pin connector, female connector
unknown(17), -- unknown connector
fiberScSM(18), -- Fiber optics SC connector Single Mode, female
fiberMTRjMM(19), -- Fiber optics Female MTRJ connector, Single Mode, female connector
fiberMTRjSM(20), -- Fiber optics Female MTRJ connector, Single Mode, female connector
bncf(21), -- Coaxial BNC Female connector
bncm(22), -- Coaxial BNC Male connector
rj21(23), -- RJ-21 50 Pin Connector
fiberScSMLH(24) -- Fiber optics Single Mode, Long Haul
}
SSRserviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A string that is unique to a module in production. This string
is used by Cabletron Service and Manufacturing as
to identify shipped inventory."
SYNTAX OCTET STRING (SIZE (0..7))
SSRmemorySize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that represents the size of memory in Megabytes. -1
represents not-available or not-applicable value."
SYNTAX INTEGER (-1..2147483647)
SSRSwitchingFabricInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A bit string that represents the status of Switching Fabric
in the shelf/chassis. Switching Fabric #1 is first 2 bits 0-1,
#2 is 2-3.
For example, given a 16 slot SSR 8600 which has one
Switching Fabric in Switching Fabric Slot #1
(lowest full length midplane slot) the
integer value 0x00000007 translates into (bits):
0 0 0 0 0 1 1 1
| | | |
| | | +--- switching fabric #1 is present
| | +----- switching fabric is primary
| + ------ switching fabric #2 is present
+--------- switching fabric is standby"
SYNTAX INTEGER (0..63)
SSRCmLedState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A bit string that represents the status of the active Control Module.
Each LED occupies a bit. The value 1 indicates LED is on, 0 is off.
The integer value 0x00000015 translates into (bits):
0 0 0 0 1 1 1 1
| | | |
| | | +- System OK -- SYS OK
| | +--- Heartbeat -- HB
| +----- Error -- ERR
+ ------ Diagnostic -- Diag"
SYNTAX INTEGER (0..15)
SSRBackupCMState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A enumeration that represents the state of the backup control module.
A backup control module prom will boot the system firmware to an
intermediate state and begins sending hello messages to the main cpu
and assume the monitor(3) state. If the prom does not boot the
backup control module, the active control module will report the
status as inactive(2). inactive(2) indicates a failed state as it
means the backup control module can not take over for the active
control module.
If the main cpu fails to respond to the backup control module's
periodic status checks and the backup control module is in the
standby(3) state, the backup control module will reset the active
control module, then reset all line cards and then finish a normal
boot sequence so that it becomes the master. At this point, the
value of this object is active(5).
Flows in the hardware must be reprogrammed and all control protocols
will have to reestablish. An enterprise trap may also be sent.
Normally, slot: CM will be the primary control module. CM/1 is
the slot for the backup control module. If some other line card
exists in slot CM/1 or no card exists, the state of this object
is notInstalled(4)."
SYNTAX INTEGER {
unknown(1), -- status unavailable to snmp agent
inactive(2), -- backup control module is offline
standby(3), -- CM in backup slot CM/1 is standby
notInstalled(4), -- no backup cm installed in Slot: cm/1
active(5) -- CM in backup slot CM/1 is active
}
-- ### groups ###
sysHwGroup OBJECT IDENTIFIER ::= { ssrMibs 1 }
sysHwNumSlots OBJECT-TYPE
SYNTAX INTEGER (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of slots present in the Shelf/Chassis."
::= { sysHwGroup 1 }
-- the Slot Table
-- The Slot table contains information on the entity's
-- plugged in modules. Each slot can have a module plugged in with
-- different network interfaces and versions.
-- The system show hardware command reports the same data as this table
sysHwModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysHwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of module entries."
::= { sysHwGroup 2 }
sysHwModuleEntry OBJECT-TYPE
SYNTAX SysHwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular module."
INDEX { sysHwModuleSlotNumber}
::= { sysHwModuleTable 1 }
SysHwModuleEntry ::=
SEQUENCE {
sysHwModuleSlotNumber INTEGER,
sysHwModuleType SSRModuleType,
sysHwModuleDesc OCTET STRING,
sysHwModuleNumPorts INTEGER,
sysHwModuleVersion OCTET STRING,
sysHwModuleMemory SSRmemorySize,
sysHwModuleService SSRserviceType,
sysHwModuleStatus SSRModuleStatus
}
sysHwModuleSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..65)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot number of the module in the Shelf/Chassis."
::= { sysHwModuleEntry 1 }
sysHwModuleType OBJECT-TYPE
SYNTAX SSRModuleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical module type."
::= { sysHwModuleEntry 2 }
sysHwModuleDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the module with it's version number etc.
For the Control Module it should have the software version, the
amount of dynamic RAM, flash RAM."
::= { sysHwModuleEntry 3 }
sysHwModuleNumPorts OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of physical ports on this Card/Module."
::= { sysHwModuleEntry 4 }
sysHwModuleVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alpha-numeric version string for this Card/Module."
::= { sysHwModuleEntry 5 }
sysHwModuleMemory OBJECT-TYPE
SYNTAX SSRmemorySize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System Memory size available on the Module. Reports
-1 if no memory exists on this module, such as power supplies."
::= { sysHwModuleEntry 6 }
sysHwModuleService OBJECT-TYPE
SYNTAX SSRserviceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cabletron service identifier string for this Card/Module.The board serial
number is appended to the string too."
::= { sysHwModuleEntry 8 }
sysHwModuleStatus OBJECT-TYPE
SYNTAX SSRModuleStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of this module, online or offline."
::= { sysHwModuleEntry 9 }
-- the Module Port Table
-- The Module table contains information on the entity's
-- ports belonging to various modules.
sysHwPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysHwPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of module entries."
::= { sysHwGroup 3 }
sysHwPortEntry OBJECT-TYPE
SYNTAX SysHwPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular module."
INDEX { sysHwPortSlotNumber, sysHwPortNumber}
::= { sysHwPortTable 1 }
SysHwPortEntry ::=
SEQUENCE {
sysHwPortSlotNumber INTEGER,
sysHwPortNumber INTEGER,
sysHwPortType SSRPortType,
sysHwPortConnectorType SSRPortConnectorType,
sysHwPortIfIndex SSRInterfaceIndex
}
sysHwPortSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot number of the module in the Chassis."
::= { sysHwPortEntry 1 }
sysHwPortNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the physical port in the Card/Module."
::= { sysHwPortEntry 2 }
sysHwPortType OBJECT-TYPE
SYNTAX SSRPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port type."
::= { sysHwPortEntry 3 }
sysHwPortConnectorType OBJECT-TYPE
SYNTAX SSRPortConnectorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port connector type."
::= { sysHwPortEntry 4 }
sysHwPortIfIndex OBJECT-TYPE
SYNTAX SSRInterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex used to access this port in the Interface MIB."
::= { sysHwPortEntry 5 }
-- SSR 8 system hardware group
PowerSupplyBits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The encoding of the bits are as follows :
Each power supply in the system is represented by two bits.
The lower bit reflecting the presence of the power supply and
the higher bit representing it's state. A 1 reflects a properly
working power supply a 0 one which is down.
This encoding allows for a maximum of 16 power supplies.
For example :
The integer value 0x00000007 translates into
0 0 0 0 0 1 1 1 in bits
| | | |
| | | +- power supply 1 is present
| | +--- power supply 1 is working normally
| +----- power supply 2 is present
+------- power supply 2 is down"
SYNTAX INTEGER (0..255)
sysHwPowerSupply OBJECT-TYPE
SYNTAX PowerSupplyBits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number and status of power supplies powering the Shelf/Chassis."
::= { sysHwGroup 4 }
sysHwFan OBJECT-TYPE
SYNTAX INTEGER {
working (1),
notWorking(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the fans located inside the Shelf/Chassis."
::= { sysHwGroup 5 }
sysHwTemperature OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
outOfRange(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature status of the Shelf/Chassis."
::= { sysHwGroup 6 }
-- Chassis Id
sysHwChassisId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operator defined serial number for this particular chassis/shelf."
::= { sysHwGroup 7 }
sysHwSwitchingFabric OBJECT-TYPE
SYNTAX SSRSwitchingFabricInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Switching Fabric in shelf/chassis."
::= { sysHwGroup 19 }
sysHwControlModuleLED OBJECT-TYPE
SYNTAX SSRCmLedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the shelf/chassis Active Control Module's four LED displays."
::= { sysHwGroup 20 }
sysHwControlModuleBackupState OBJECT-TYPE
SYNTAX SSRBackupCMState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the the backup Control Module as interpreted from the
active control module. CLI: system show hardware will present
the following data: Redundant CPU slot : Not present"
::= { sysHwGroup 21 }
sysHwLastHotSwapEvent OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the last hotswap of a physical module event occured."
::= { sysHwGroup 22 }
-- Deprecated Variables Aggregation Counter Group
sysHwTotalInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of octets into the switch."
::= { sysHwGroup 10 }
sysHwTotalOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of octets out of the switch."
::= { sysHwGroup 11 }
sysHwTotalInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of frames into the switch."
::= { sysHwGroup 12 }
sysHwTotalOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of frames out of the switch."
::= { sysHwGroup 13 }
sysHwTotalL2SwitchedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current number of frames switched at Layer 2 (transport)."
::= { sysHwGroup 14 }
sysHwTotalL3SwitchedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current number of frames switched at IETF Layers 3 (transport) and
4 (application)."
::= { sysHwGroup 15 }
-- ### Compliance ###
hwConformance OBJECT IDENTIFIER ::= { hardwareMIB 2 }
hwCompliances OBJECT IDENTIFIER ::= { hwConformance 1 }
hwGroups OBJECT IDENTIFIER ::= { hwConformance 2 }
hwComplianceV10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SSR-HARDWARE-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwConfGroupV10 }
::= { hwConfGroupV10 1 }
hwComplianceV11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SSR-HARDWARE-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwConfGroupV11 }
::= { hwConfGroupV11 2 }
hwComplianceV12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SSR-HARDWARE-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwConfGroupV11 }
::= { hwConfGroupV11 3 }
hwComplianceV30 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SSR-HARDWARE-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwConfGroupV30 }
::= { hwConfGroupV11 4 }
hwConfGroupV10 OBJECT-GROUP
OBJECTS {
sysHwNumSlots,
sysHwModuleSlotNumber,
sysHwModuleType,
sysHwModuleDesc,
sysHwModuleNumPorts,
sysHwModuleVersion,
sysHwPortSlotNumber,
sysHwPortNumber,
sysHwPortType,
sysHwPortConnectorType,
sysHwPortIfIndex,
sysHwPowerSupply,
sysHwFan,
sysHwTemperature,
sysHwChassisId,
sysHwTotalInOctets,
sysHwTotalOutOctets,
sysHwTotalInFrames,
sysHwTotalOutFrames,
sysHwTotalL2SwitchedFrames,
sysHwTotalL3SwitchedFrames
}
STATUS deprecated
DESCRIPTION
"A set of managed objects that make up version 1.0 of the SSR Hardware mib."
::= { hwGroups 1 }
hwConfGroupV11 OBJECT-GROUP
OBJECTS {
sysHwNumSlots,
sysHwModuleSlotNumber,
sysHwModuleType,
sysHwModuleDesc,
sysHwModuleNumPorts,
sysHwModuleVersion,
sysHwModuleMemory,
sysHwModuleService,
sysHwPortSlotNumber,
sysHwPortNumber,
sysHwPortType,
sysHwPortConnectorType,
sysHwPortIfIndex,
sysHwPowerSupply,
sysHwFan,
sysHwTemperature,
sysHwChassisId,
sysHwSwitchingFabric,
sysHwControlModuleLED
}
STATUS deprecated
DESCRIPTION
"A set of managed objects that make up version 1.1 of the SSR Hardware mib."
::= { hwGroups 2 }
hwConfGroupV12 OBJECT-GROUP
OBJECTS {
sysHwNumSlots,
sysHwModuleSlotNumber,
sysHwModuleType,
sysHwModuleDesc,
sysHwModuleNumPorts,
sysHwModuleVersion,
sysHwModuleMemory,
sysHwModuleService,
sysHwModuleStatus,
sysHwPortSlotNumber,
sysHwPortNumber,
sysHwPortType,
sysHwPortConnectorType,
sysHwPortIfIndex,
sysHwPowerSupply,
sysHwFan,
sysHwTemperature,
sysHwChassisId,
sysHwSwitchingFabric,
sysHwControlModuleLED
}
STATUS deprecated
DESCRIPTION
"A set of managed objects that make up version 1.2 of the SSR Hardware mib."
::= { hwGroups 3 }
hwConfGroupV30 OBJECT-GROUP
OBJECTS {
sysHwNumSlots,
sysHwModuleSlotNumber,
sysHwModuleType,
sysHwModuleDesc,
sysHwModuleNumPorts,
sysHwModuleVersion,
sysHwModuleMemory,
sysHwModuleService,
sysHwModuleStatus,
sysHwPortSlotNumber,
sysHwPortNumber,
sysHwPortType,
sysHwPortConnectorType,
sysHwPortIfIndex,
sysHwPowerSupply,
sysHwFan,
sysHwTemperature,
sysHwChassisId,
sysHwSwitchingFabric,
sysHwControlModuleLED,
sysHwControlModuleBackupState,
sysHwLastHotSwapEvent
}
STATUS current
DESCRIPTION
"A set of managed objects that make up version 3.0 of the SSR Hardware mib."
::= { hwGroups 4 }
END
Reference in New Issue Copy Permalink