david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/enterasys/CTRON-SSR-POLICY-MIB

1623 lines
51 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CTRON-SSR-POLICY-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for Enterasys
-- Networks' enterprise-specific Smart Switch Router specific MIB
-- branches.
--
-- This module will be extended, as required.
-- Enterasys Networks reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Enterasys products.
-- Copyright 1998-2003 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, IpAddress, Counter32, Gauge32,
Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
dot1qVlanStaticEntry
FROM Q-BRIDGE-MIB
ssrMibs
FROM CTRON-SSR-SMI-MIB;
policyMIB MODULE-IDENTITY
LAST-UPDATED "200312191712Z" -- Fri Dec 19 17:12 GMT 2003
ORGANIZATION "Enterasys Networks, Inc"
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This module defines a schema to control filters on a device capable
of Layer 3 filters also called Access Control Lists (ACLs) and at
layer 2. It may also be used to configure static IP routes that use
other IP header fields in addition to destination IP address."
REVISION "200312191712Z" -- Fri Dec 19 17:12 GMT 2003
DESCRIPTION
"Defined bit 0 of polL2Dot1qVlanStaticProtocols as reserved."
REVISION "200307211501Z" -- Mon Jul 21 15:01 GMT 2003
DESCRIPTION
"Revision #5. Add static VLAN protocol filtering to the polL2Group.
Update contact information."
REVISION "200007150000Z"
DESCRIPTION
"Revision #4. Update contact information."
REVISION "9908110000Z"
DESCRIPTION
"Revision #3. Define Policy Based Routing in polL4Group."
REVISION "9907210000Z"
DESCRIPTION
"Revision #2. Define Layer 2 flow security objects in polL2Group."
REVISION "9808040000Z"
DESCRIPTION
"Revision #1. Define Layer 3 flow objects in polL3Group."
::= { ssrMibs 210 }
-- ### Textual conventions
-- InterfaceIndex contains the semantics of ifIndex and
-- should be used for any objects defined on other MIB
-- modules that need these semantics.
InterfaceIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface
or interface sub-layer in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
SYNTAX Integer32 (1..2147483647)
InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This textual convention is an extension of the
InterfaceIndex convention. The latter defines a
greater than zero value used to identify an interface
or interface sub-layer in the managed system. This
extension permits the additional value of zero. the
value zero is object-specific and must therefore be
defined as part of the description of any object which
uses this syntax. Examples of the usage of zero might
include situations where interface was unknown, or
when none or all interfaces need to be referenced."
SYNTAX Integer32 (0..2147483647)
SSRPortComparator ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Comparison operator used by ACL's to permit src/dst port addresses."
SYNTAX INTEGER {
notused(1), -- no port comparison to be made
eq(2), -- equals
neq(3), -- not equals
lt(4), -- less than
gt(5), -- greater than
range(6) -- contains X-Y inclusive
}
SSRProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Protocols supported by L3 ACLs."
SYNTAX INTEGER {
ip(1), -- Internet Protocol Version 4
tcp(2), -- Transmission Control Protocol
udp(3), -- User Datagram Protocol
icmp(4), -- Internet Control Management Protocol
igmp(5), -- Internet Group Management Protocol (Multicast)
ipx(6), -- Novell IPX protocol
ipxsap(7), -- Novell IPX SAP protocol
ipxrip(8) -- Novell IPX RIP protocol
}
SSRsocketId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A TCP or UDP port or socket end point."
SYNTAX INTEGER (0..65535)
SSRVlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An 802.1Q VLAN Identifier with same semantics as Q-BRIDGE-MIB VlanId.
SSR uses Vid 1 for the default VLAN. All ports by default belong to this VLAN
unless assigned to one or more user defined VLANs. A value of 4100 is used to match
all VLANs. 4094 to 4099 are reserved local VLAN ids on the SSR."
SYNTAX INTEGER (1..4100)
SSRPortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"List of ifIndexes that make up the ports to apply a layer 2 filter to.
The ifIndexes are numbered sparsely starting from 1. An example string
might be:
1,2,32
1,6,9,
Each ifIndex must represent a physical port or link aggregation aka Smart
Trunk ifType of propMultiplexor(54). Note ifIndexes may change across
system resets per RFC 2233."
SYNTAX OCTET STRING (SIZE (0..255))
SSRFlowPolicyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Flow Policy. permitFlow allows matching traffic to be forwarded. denyFlow
causes matching traffic to be discarded."
SYNTAX INTEGER { permitFlow(1), denyFlow(2) }
SSRFlowPolicyAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When deciding when to apply policy there are three potential methods.
policyBeforeRouteLookup provides a way to special case normal traffic patterns
so that certain traffic can be routed according to policy.
policyAfterRouteLookup is useful when a default route does not exist and the traffic
to route does not match existing route tables.
useOnlyPolicyLookup bypasses normal route lookup altogether."
SYNTAX INTEGER { policyBeforeRouteLookup(1), policyAfterRouteLookup(2), useOnlyPolicyLookup(3) }
SSRFlowPolicyAclList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A blank separated list of ACL names used to match flows against from the polAclTable.
The keyword, everything, may be used to match all traffic. ASCII printable characters only"
SYNTAX OCTET STRING (SIZE(1..4096))
SSRFlowNextHopList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A blank separated list of from one to four l4fNextHopRouter ipaddresses or
the keyword null. Null represents the null interface"
SYNTAX OCTET STRING (SIZE(1..4096))
SSRFlowLoadPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"round robin evenly distributes flows among the next hops. firstAvailable
will make flows go to the first available next hop in the ordered list."
SYNTAX INTEGER { firstAvailable(2), roundRobin(3) }
-- ### groups ###
-- Layer 3 Policy Group
polL3Group OBJECT IDENTIFIER ::= { ssrMibs 12 }
polAclServer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is true when Access Control Lists (ACLs) are defined by a
Policy Server else false.
At boot, this value is false. After the first valid set of any
policy object, the value changes to true."
::= { polL3Group 1 }
polAclNumber OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Layer 3 Access Control Lists defined in the SSR."
::= { polL3Group 2 }
polAclLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the Access Control List were last changed."
::= { polL3Group 3 }
-- The Layer 3 Access Control List Configuration Table
polAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Access Control List entries."
::= { polL3Group 4 }
polAclEntry OBJECT-TYPE
SYNTAX PolAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A record containing a Access Control List."
INDEX { polAclName, polAclItem }
::= { polAclTable 1 }
PolAclEntry ::=
SEQUENCE {
polAclName DisplayString,
polAclItem INTEGER,
polAclRestriction INTEGER,
polAclProtocol SSRProtocol,
polAclSrcIp IpAddress,
polAclSrcMask IpAddress,
polAclDstIp IpAddress,
polAclDstMask IpAddress,
polAclTOS INTEGER,
polAclSrcPort SSRsocketId,
polAclDstPort SSRsocketId,
polAclSrcOperator SSRPortComparator,
polAclDstOperator SSRPortComparator,
polAclSrcHighRange INTEGER,
polAclDstHighRange INTEGER,
polAclAuditTrail TruthValue,
polAclCheckpoint INTEGER,
polAclRowStatus RowStatus
}
polAclName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administratively assigned name to this static route entry."
::= { polAclEntry 1 }
polAclItem OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This row's unique identifier within a given ACL set. Member of the ACL set
are numbered from 1 to 256. If Item is set to 0, and rowStatus is destroy,
all rows for this set are destroyed."
::= { polAclEntry 2 }
polAclRestriction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The permissions/restrictions given to this static route entry."
::= { polAclEntry 3 }
polAclProtocol OBJECT-TYPE
SYNTAX SSRProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IETF protocol this ACL applies to."
::= { polAclEntry 4 }
polAclSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP Address this ACL applies to."
::= { polAclEntry 5 }
polAclSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP Mask this ACL Applies to."
::= { polAclEntry 6 }
polAclDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP Address this ACL applies to."
::= { polAclEntry 7 }
polAclDstMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP Mask this ACL Applies to."
::= { polAclEntry 8 }
polAclTOS OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP Type of Service field."
::= { polAclEntry 9 }
polAclSrcPort OBJECT-TYPE
SYNTAX SSRsocketId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP source port/socket ACL applies to."
::= { polAclEntry 10 }
polAclDstPort OBJECT-TYPE
SYNTAX SSRsocketId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source L3 IP destination port/socket ACL applies to."
::= { polAclEntry 11 }
polAclSrcOperator OBJECT-TYPE
SYNTAX SSRPortComparator
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"polAclSrcPort is compared using this operator."
DEFVAL { eq }
::= { polAclEntry 12 }
polAclDstOperator OBJECT-TYPE
SYNTAX SSRPortComparator
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"polAclDstPort is compared using this operator."
DEFVAL { eq }
::= { polAclEntry 13 }
polAclSrcHighRange OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high range source L3 IP port. Used
only when SrcOperator == range. polAclSrcPort is
used as the lower bounds of the range."
DEFVAL { -1 }
::= { polAclEntry 14 }
polAclDstHighRange OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high range destination L3 IP port. Used
only when SrcOperator == range. polAclDstPort is
used as the lower bounds of the range."
DEFVAL { -1 }
::= { polAclEntry 15 }
polAclAuditTrail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flows matching this ACL are logged for Accounting when true."
::= { polAclEntry 16 }
polAclCheckpoint OBJECT-TYPE
SYNTAX INTEGER {
hourly(1),
daily(2),
weekly(3),
monthly(4),
endofcall(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"How long to keep flow at which point a checkpoint should be done.
A checkpoint may trigger earlier than this time should the maximum
batch size be reached."
::= { polAclEntry 17 }
polAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP V2 RowStatus control for this table."
::= { polAclEntry 18 }
-- ACL's created must be applied to either an Interface or service
polAclServiceNumber OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Layer 3 Access Control Lists in service in the SSR."
::= { polL3Group 5 }
polAclServiceLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the ACLs in service were last changed."
::= { polL3Group 6 }
-- The Layer 3 Access Control List Configuration Table
polAclServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolAclServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ACL's currently in service."
::= { polL3Group 7 }
polAclServiceEntry OBJECT-TYPE
SYNTAX PolAclServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A record containing a Access Control Lists applied to Interfaces."
INDEX { polAclServiceIfIndex, polAclName2 }
::= { polAclServiceTable 1 }
PolAclServiceEntry ::=
SEQUENCE {
polAclServiceIfIndex InterfaceIndex,
polAclName2 DisplayString,
polAclServiceDirection INTEGER,
polAclServiceRowStatus RowStatus
}
polAclServiceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the IP Interface the ACL is applied to.
An SSR IP Interface has ifType 142"
::= { polAclServiceEntry 1 }
polAclName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the ACL applied to the particular port."
::= { polAclServiceEntry 2 }
polAclServiceDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction the ACL is applied to the particular port."
::= { polAclServiceEntry 3 }
polAclServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP V2 RowStatus control for this table."
::= { polAclServiceEntry 6 }
-- List of IP Interfaces and their policy status
polAclRemoteAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote Policy Configuration is allowed when true only
local (to SSR) policy may be applied."
::= { polL3Group 9 }
polAclInterfaceNumber OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Layer 3 Interfaces in service in the SSR."
::= { polL3Group 10 }
polAclInterfaceLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the Interfaces in service were last changed with regard to policy."
::= { polL3Group 11 }
polAclInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolAclInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP Interfaces in service and their policy status. Each IP Interface can be
defined to use local static policy or remote dynamic policy in the config."
::= { polL3Group 12 }
polAclInterfaceEntry OBJECT-TYPE
SYNTAX PolAclInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A record containing a Access Control Lists applied to Interfaces."
INDEX { polAclInterfaceIfIndex, polAclInterfaceDirection }
::= { polAclInterfaceTable 1 }
PolAclInterfaceEntry ::=
SEQUENCE {
polAclInterfaceIfIndex InterfaceIndex,
polAclInterfaceDirection INTEGER,
polAclPolicyStatus INTEGER
}
polAclInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the IP Interface the ACL is applied to."
::= { polAclInterfaceEntry 1 }
polAclInterfaceDirection OBJECT-TYPE
SYNTAX INTEGER { -- TBD: Make into TC
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction the ACL is applied to the particular port."
::= { polAclInterfaceEntry 2 }
polAclPolicyStatus OBJECT-TYPE
SYNTAX INTEGER {
local(1), -- ACLs can be applied via local mgmt only
remote(2) -- ACLs can be applied via local or remote
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rules for what type of management can apply ACLs to a particular interface. If set to remote,
then a Policy Manager via SNMP may change dynamically the ACLs applied to an interface. Note,
ACLs applied dynamically are not maintained across system reboot. Use local ACLs to setup the basic
rules then apply dynamic rules as necessary."
::= { polAclInterfaceEntry 3 }
--
-- L2 Policy Policy Group
--
polL2Group OBJECT IDENTIFIER ::= { ssrMibs 16 }
polL2FilterNumber OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Layer 3 Access Control Lists defined in the SSR."
::= { polL2Group 1 }
polL2FilterLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the Access Control List were last changed."
::= { polL2Group 2 }
polL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Layer 2 filters."
::= { polL2Group 3 }
polL2FilterEntry OBJECT-TYPE
SYNTAX PolL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a layer 2 filter."
INDEX { polL2FilterIndex }
::= { polL2FilterTable 1 }
PolL2FilterEntry ::=
SEQUENCE {
polL2FilterIndex INTEGER,
polL2FilterDesc DisplayString,
polL2FilterType INTEGER,
polL2FilterRestrictions INTEGER,
polL2FilterDstMacAddr MacAddress,
polL2FilterSrcMacAddr MacAddress,
polL2FilterVlanId SSRVlanIndex,
polL2FilterInPorts SSRPortList,
polL2FilterOutPorts SSRPortList,
polL2FilterCreationTime TimeTicks,
polL2FilterStatus RowStatus
}
polL2FilterIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique index into the table representing a single filter entry. This value
will remain unique and the relationship between the index and the underlying filter
is valid until the next reboot."
::= { polL2FilterEntry 1 }
polL2FilterDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..25))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string used to describe the filter. It should contain
the creator IP address, and other descriptive information about the filter.
It is recommended that names be unique within a given filter type.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
::= { polL2FilterEntry 2 }
polL2FilterType OBJECT-TYPE
SYNTAX INTEGER {
staticEntry(1),
addressFilter(2),
portAddressLock(3),
securePort(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The types of filters, as explained below.
static-entry
Based on the restrictions and the presence of
source, destination MAC address they can be of
three types :
source-static-entry - All frames with a source
address equal to srcMAC, coming through any of
the inPorts will be allowed/disallowed to go
to any port that is a member of the outPorts
list.
destination-static-entry - All frames with a
destination address equal to dstMAC, coming
through any of the inPorts will be allowed/
disallowed/forced to go to any port that is a
member of the outPorts list.
flow-static-entry - All frames with a source
address equal to srcMAC and a destination address
equal to dstMAC, coming through any of the inPorts
list will be allowed/disallowed to go to any port
that is a member of the outPorts list. Ports
must be in flow-bridging mode in order to use
filters with both src and dst mac specified.
address-filter
Based on the restrictions and the presence of
source, destination MAC address they can be of
three types :
source-address-filter - All frames with a source
address equal to srcMAC, coming through any of
the inPorts will be filtered out.
destination-address-filter - All frames with a
destination address equal to dstMAC, coming through
any of the inPorts will be filtered out.
flow-filter - All frames with a source address equal
to srcMAC and a destination address equal to dstMAC,
coming through any of the inPorts list will be
filtered out. Ports must be in flow mode in order
to set a filter using both source and destination
address.
port-address-lock
This locks a source address to a port. It allows
learning of srcMAC addresses only on any of the ports
in inPorts. The following objects are mandatory
and must be set by mgmt station to activate a row:
polL2FilterDesc, polL2FilterSrcMacAddr, polL2FilterInPorts
secure-port
This blocks all traffic in a given direction to a port.
Used with static entries, it is effective in allowing only
certain well defined source/destination mac addresses.
The following objects must be set by mgmt station to
activate an entry:
polL2FilterDesc, r, polL2FilterInPorts
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
DEFVAL { staticEntry }
::= { polL2FilterEntry 3 }
polL2FilterRestrictions OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2),
force(3),
none(4),
blockIngress(5),
blockEgress(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first 3 restrictions, allow, disallow, force apply when the filterType
is static-entry. When polL2FilterType is addressFilter or portAddressLock,
this object does not apply. For securePort, the blockIngress, blockEgress
values apply.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
DEFVAL { none }
::= { polL2FilterEntry 4 }
polL2FilterSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source MAC address, which is present in case
of a Flow, that has been learned by the switch."
::= { polL2FilterEntry 5 }
polL2FilterDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination MAC address which has been learned.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
::= { polL2FilterEntry 6 }
polL2FilterVlanId OBJECT-TYPE
SYNTAX SSRVlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN the destination MAC address belongs to. The default VLAN
is id 1 on SSR.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
DEFVAL {1}
::= { polL2FilterEntry 7 }
polL2FilterInPorts OBJECT-TYPE
SYNTAX SSRPortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of Ports to which this filter applies on input.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
::= { polL2FilterEntry 8 }
polL2FilterOutPorts OBJECT-TYPE
SYNTAX SSRPortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports to which this filter applies on output.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1)."
::= { polL2FilterEntry 9 }
polL2FilterCreationTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this filter was made active(1)."
::= { polL2FilterEntry 10 }
polL2FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SMIv2 RowStatus control for this table. Use createAndWait or createAndGo
to create a filter, use destroy to remove an entry or notInService to
disengage a filter without destroying it. A row in the notReady state has
not had all the mandatory objects set."
::= { polL2FilterEntry 11 }
-- VLAN Protocol Filtering
polL2Dot1qVlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolL2Dot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing hardware specific VLAN behavior configuration
information for VLANs created with the dot1qVlanStaticTable.
Configuration information for each VLAN configured into the device by (local or
network) management."
::= { polL2Group 4 }
polL2Dot1qVlanStaticEntry OBJECT-TYPE
SYNTAX PolL2Dot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional hardware
specific objects for a dot1qVlanStaticEntry."
AUGMENTS { dot1qVlanStaticEntry }
::= { polL2Dot1qVlanStaticTable 1 }
PolL2Dot1qVlanStaticEntry ::=
SEQUENCE {
polL2Dot1qVlanStaticProtocols BITS,
polL2Dot1qVlanStaticL4Bridging TruthValue
}
polL2Dot1qVlanStaticProtocols OBJECT-TYPE
SYNTAX BITS {
reserved (0),
bridged-protocols (1),
ip(2),
ipx(3),
appletalk(4),
dec(5),
sna(6),
ipv6(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the types of traffic that will be forwarded on this VLAN.
Protocols not set in this definition will be filtered. The types of protocols
supported on this VLAN corresponds to the type option in the CLI command
vlan create <vlan name> <type>. If no protocols are specified, all
protocols are forwarded. This corresponds to the port-based CLI
option.
reserved(0) - this bit is reserved and has no defined behavior.
bridged-protocols(1) - this VLAN supports all bridged protocols
excluding IP and IPX. Includes appletalk(4), dec(5), sna(6), and
ipv6(7) if none of these protocols are set. If any are set, only
those that are set are included.
ip(2) - this VLAN supports IP protocol.
ipx(3) - this VLAN supports IPX protocol.
appletalk(4) - this VLAN supports Appletalk protocol.
dec(5) - this VLAN supports DEC protocol.
sna(6) - this VLAN supports SNA protocol.
ipv6(7) - this VLAN supports IPv6 protocol."
DEFVAL { { ip } }
::= { polL2Dot1qVlanStaticEntry 1 }
polL2Dot1qVlanStaticL4Bridging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object has a value of false(2), the L4 Bridging feature is not
enabled on this VLAN. If this object has a value of true(1), the L4 Bridging
feature is enabled for this VLAN. This corresponds to the CLI command
vlan enable l4-bridging."
DEFVAL { true }
::= { polL2Dot1qVlanStaticEntry 2 }
--
-- Layer 4 Flow Management
--
polL4Group OBJECT IDENTIFIER ::= { ssrMibs 15 }
polL4PolicyBasedRoutingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Policy Based Routing on this network element."
::= { polL4Group 1 }
polL4NumRouters OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of next hop routers currently available."
::= { polL4Group 5 }
polL4NextHopTableLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when a row was last added
or deleted from polL4NextHopTable."
::= { polL4Group 10 }
--
-- the Next Hop Control Table
--
-- The Next Hop Control table contains information on
-- what next hop routers can be used to redirect existing L4 IP Flows
polL4NextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolL4NextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of next hop IP routers."
::= { polL4Group 20 }
polL4NextHopEntry OBJECT-TYPE
SYNTAX PolL4NextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the status of a next hop router."
INDEX { polL4NextHopRouter }
::= { polL4NextHopTable 1 }
PolL4NextHopEntry ::=
SEQUENCE {
polL4NextHopRouter IpAddress,
polL4NextHopState INTEGER,
polL4NextHopPortOfExit InterfaceIndexOrZero,
polL4NextHopMacAddress MacAddress,
polL4NextHopLastChange TimeTicks
}
polL4NextHopRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the next hop router flow will be sent to."
::= { polL4NextHopEntry 1 }
polL4NextHopState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
waitingForArp(2),
macAcquired(3),
noArpReply(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the polL4NextHopRouter.
If no entry found when a policy route is activated,
then arp for the request the state will be waitingForArp(2).
If a reply is found the state will go to macAcquired(3)
else noArpReply(4). If NextHop is not local, mac is actual
nexthop router."
::= { polL4NextHopEntry 2 }
polL4NextHopPortOfExit OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IfIndex of port we learned this router on or else zero if not known."
::= { polL4NextHopEntry 3 }
polL4NextHopMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address of next hop router learned from ARP."
::= { polL4NextHopEntry 4 }
polL4NextHopLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this polL4NextHopState changed."
::= { polL4NextHopEntry 5 }
--
-- Layer 4 Flow Control Table
--
-- This table provides a means to redirect a given flow next hop router from the next hop Router Table
--
polL4lowControlTableLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when a row was last added or deleted from polL4lowControlTable."
::= { polL4Group 25 }
polL4NumPolicies OBJECT-TYPE
SYNTAX INTEGER (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of policies currently available."
::= { polL4Group 26 }
polL4lowControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolL4lowControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains Control rows that indicate which flows have been redirected. As flows
are aged out and recreated, these rules will enforce flow redirection policy."
::= { polL4Group 30 }
polL4lowControlEntry OBJECT-TYPE
SYNTAX PolL4lowControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an ordered collection of route policies. For SSR, this maps
to the command: ip-policy Name [permit|deny] acl acl-list"
INDEX {
polL4PolicyName,
polL4PolicySequence,
polL4PolicyInstance
}
::= { polL4lowControlTable 1 }
PolL4lowControlEntry ::=
SEQUENCE {
polL4PolicyName DisplayString,
polL4PolicySequence Integer32,
polL4PolicyInstance Integer32,
polL4PolicyType SSRFlowPolicyType,
polL4PolicyAction SSRFlowPolicyAction,
polL4PolicyMatch SSRFlowPolicyAclList,
polL4PolicyNextHops SSRFlowNextHopList,
polL4PolicyLoading SSRFlowLoadPolicy,
polL4PolicyWatch TruthValue,
polL4lowCreationTime TimeTicks, -- read only
polL4lowActiveGates Gauge32, -- read only
polL4lowAppliedTimes Counter32, -- read only
polL4lowControlStatus RowStatus
}
polL4PolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique name for this flow policy."
::= { polL4lowControlEntry 1 }
polL4PolicySequence OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The evaluation order of this object. When two objects have the same value,
the value of the instance value decides which is evaluated first.
than higher numbers."
::= { polL4lowControlEntry 2 }
polL4PolicyInstance OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sequence of this policy based route. Lower numbers have higher precedence
than higher numbers."
::= { polL4lowControlEntry 3 }
polL4PolicyType OBJECT-TYPE
SYNTAX SSRFlowPolicyType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls if packets are forwarded or not for this policy."
DEFVAL { permitFlow }
::= { polL4lowControlEntry 4 }
polL4PolicyAction OBJECT-TYPE
SYNTAX SSRFlowPolicyAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define when this policy should be used during normal packet forwarding process."
DEFVAL { policyBeforeRouteLookup }
::= { polL4lowControlEntry 5 }
polL4PolicyMatch OBJECT-TYPE
SYNTAX SSRFlowPolicyAclList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Up to twenty (20) separate ACLs may be defined to match for this policy.
This object is mandatory. Use active row from polAclTable."
::= { polL4lowControlEntry 6 }
polL4PolicyNextHops OBJECT-TYPE
SYNTAX SSRFlowNextHopList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Up to for IpAddresses may be specified to route data to next. Load balancing
If more than one next hop ip address is specified, the default load balancing
scheme is round robin. This object is mandatory. Use objects from polL4NextHopTable."
::= { polL4lowControlEntry 7 }
polL4PolicyLoading OBJECT-TYPE
SYNTAX SSRFlowLoadPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When more than one next hop is defined and available, set loading policy here."
DEFVAL { firstAvailable }
::= { polL4lowControlEntry 8 }
polL4PolicyWatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When True, use icmp echo to actively maintain status of next hop. This
is useful to prevent data sinks with static routes."
DEFVAL { false }
::= { polL4lowControlEntry 9 }
polL4lowCreationTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when policy went was created then activated."
::= { polL4lowControlEntry 10 }
polL4lowActiveGates OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active nexthop gateways."
::= { polL4lowControlEntry 11 }
polL4lowAppliedTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this policy was used."
::= { polL4lowControlEntry 12 }
polL4lowControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Entries in active state cause a flow to remain programmed with the next hop router specified.
If the next hop router goes down, the rowStatus will become inactive. New flows that match this
specification will assume this next hop router over any other route directive.
This assumes polL4PolicyBasedRouteState value is true."
::= { polL4lowControlEntry 13 }
--
-- Summary Statistics for Flow Control SNMP API
--
polL4GroupStats OBJECT IDENTIFIER ::= { polL4Group 35 }
polL4lowLostRouters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of times routers were disabled from NextHopTable due to lost contact."
::= { polL4GroupStats 1 }
polL4lowControlTableActivates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of successful activations of flow control policies made."
::= { polL4GroupStats 2 }
polL4lowControlTableActivateFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of unsuccessful flow control policies made."
::= { polL4GroupStats 3 }
polL4lowArpMappingChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of mac to next hop IP address mapping changes
affecting policy based route tables."
::= { polL4GroupStats 4 }
polL4lowIcmpRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of next hop route redirects received that
match a policy in the polL4lowControlTable.
This can help to determine if bad route policies are in effect."
::= { polL4GroupStats 16 }
polL4lowMatchAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of total number of policy based flow lookups
made against policy based route table. "
::= { polL4GroupStats 17 }
-- Compliance Statements
polConformance OBJECT IDENTIFIER ::= { policyMIB 2 }
polCompliances OBJECT IDENTIFIER ::= { polConformance 1 }
polGroups OBJECT IDENTIFIER ::= { polConformance 2 }
polComplianceV10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the policyMIB."
MODULE -- this module
MANDATORY-GROUPS { polGroupV10 }
::= { polCompliances 1 }
polComplianceV11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the policyMIB for version 1.1."
MODULE -- this module
MANDATORY-GROUPS { polGroupV11 }
::= { polCompliances 2 }
polComplianceV12 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the policyMIB for version 1.2."
MODULE -- this module
MANDATORY-GROUPS { polGroupV12 }
::= { polCompliances 3 }
polComplianceV13 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the policyMIB for version 1.3."
MODULE -- this module
MANDATORY-GROUPS { polGroupV13 }
::= { polCompliances 4 }
polGroupV10 OBJECT-GROUP
OBJECTS {
polAclServer,
polAclNumber,
polAclLastChanged,
polAclName,
polAclItem,
polAclRestriction,
polAclProtocol,
polAclSrcIp,
polAclSrcMask,
polAclDstIp,
polAclDstMask,
polAclTOS,
polAclSrcPort,
polAclDstPort,
polAclSrcOperator,
polAclDstOperator,
polAclSrcHighRange,
polAclDstHighRange,
polAclAuditTrail,
polAclCheckpoint,
polAclRowStatus,
polAclServiceNumber,
polAclServiceLastChanged,
polAclServiceIfIndex,
polAclName2,
polAclServiceDirection,
polAclServiceRowStatus,
polAclRemoteAllowed,
polAclInterfaceNumber,
polAclInterfaceLastChanged,
polAclInterfaceIfIndex,
polAclInterfaceDirection,
polAclPolicyStatus
}
STATUS deprecated
DESCRIPTION
"A set of managed objects that make up version 1.0 of the SSR Flow Policy MIB."
::= { polGroups 1 }
polGroupV11 OBJECT-GROUP
OBJECTS {
polAclServer,
polAclNumber,
polAclLastChanged,
polAclName,
polAclItem,
polAclRestriction,
polAclProtocol,
polAclSrcIp,
polAclSrcMask,
polAclDstIp,
polAclDstMask,
polAclTOS,
polAclSrcPort,
polAclDstPort,
polAclSrcOperator,
polAclDstOperator,
polAclSrcHighRange,
polAclDstHighRange,
polAclAuditTrail,
polAclCheckpoint,
polAclRowStatus,
polAclServiceNumber,
polAclServiceLastChanged,
polAclServiceIfIndex,
polAclName2,
polAclServiceDirection,
polAclServiceRowStatus,
polAclRemoteAllowed,
polAclInterfaceNumber,
polAclInterfaceLastChanged,
polAclInterfaceIfIndex,
polAclInterfaceDirection,
polAclPolicyStatus,
polL2FilterLastChanged,
polL2FilterNumber,
polL2FilterDesc,
polL2FilterType,
polL2FilterRestrictions,
polL2FilterSrcMacAddr,
polL2FilterDstMacAddr,
polL2FilterVlanId,
polL2FilterInPorts,
polL2FilterOutPorts,
polL2FilterCreationTime,
polL2FilterStatus
}
STATUS deprecated
DESCRIPTION
"A set of managed objects that make up version 1.1 of the SSR Flow Policy MIB."
::= { polGroups 2 }
polGroupV12 OBJECT-GROUP
OBJECTS {
polAclServer,
polAclNumber,
polAclLastChanged,
polAclName,
polAclItem,
polAclRestriction,
polAclProtocol,
polAclSrcIp,
polAclSrcMask,
polAclDstIp,
polAclDstMask,
polAclTOS,
polAclSrcPort,
polAclDstPort,
polAclSrcOperator,
polAclDstOperator,
polAclSrcHighRange,
polAclDstHighRange,
polAclAuditTrail,
polAclCheckpoint,
polAclRowStatus,
polAclServiceNumber,
polAclServiceLastChanged,
polAclServiceIfIndex,
polAclName2,
polAclServiceDirection,
polAclServiceRowStatus,
polAclRemoteAllowed,
polAclInterfaceNumber,
polAclInterfaceLastChanged,
polAclInterfaceIfIndex,
polAclInterfaceDirection,
polAclPolicyStatus,
polL2FilterLastChanged,
polL2FilterNumber,
polL2FilterDesc,
polL2FilterType,
polL2FilterRestrictions,
polL2FilterSrcMacAddr,
polL2FilterDstMacAddr,
polL2FilterVlanId,
polL2FilterInPorts,
polL2FilterOutPorts,
polL2FilterCreationTime,
polL2FilterStatus,
polL4PolicyBasedRoutingEnabled,
polL4NumRouters,
polL4NextHopTableLastChange,
polL4NextHopRouter,
polL4NextHopState,
polL4NextHopPortOfExit,
polL4NextHopMacAddress,
polL4NextHopLastChange,
polL4lowControlTableLastChange,
polL4NumPolicies,
polL4PolicyType,
polL4PolicyAction,
polL4PolicyMatch,
polL4PolicyNextHops,
polL4PolicyLoading,
polL4PolicyWatch,
polL4lowCreationTime,
polL4lowActiveGates,
polL4lowAppliedTimes,
polL4lowControlStatus,
polL4lowLostRouters,
polL4lowControlTableActivates,
polL4lowControlTableActivateFails,
polL4lowArpMappingChanges,
polL4lowIcmpRedirects,
polL4lowMatchAttempts
}
STATUS current
DESCRIPTION
"A set of managed objects that make up version 1.2 of the SSR Flow Policy MIB."
::= { polGroups 3 }
polGroupV13 OBJECT-GROUP
OBJECTS {
polAclServer,
polAclNumber,
polAclLastChanged,
polAclName,
polAclItem,
polAclRestriction,
polAclProtocol,
polAclSrcIp,
polAclSrcMask,
polAclDstIp,
polAclDstMask,
polAclTOS,
polAclSrcPort,
polAclDstPort,
polAclSrcOperator,
polAclDstOperator,
polAclSrcHighRange,
polAclDstHighRange,
polAclAuditTrail,
polAclCheckpoint,
polAclRowStatus,
polAclServiceNumber,
polAclServiceLastChanged,
polAclServiceIfIndex,
polAclName2,
polAclServiceDirection,
polAclServiceRowStatus,
polAclRemoteAllowed,
polAclInterfaceNumber,
polAclInterfaceLastChanged,
polAclInterfaceIfIndex,
polAclInterfaceDirection,
polAclPolicyStatus,
polL2FilterLastChanged,
polL2FilterNumber,
polL2FilterDesc,
polL2FilterType,
polL2FilterRestrictions,
polL2FilterSrcMacAddr,
polL2FilterDstMacAddr,
polL2FilterVlanId,
polL2FilterInPorts,
polL2FilterOutPorts,
polL2FilterCreationTime,
polL2FilterStatus,
polL2Dot1qVlanStaticProtocols,
polL2Dot1qVlanStaticL4Bridging,
polL4PolicyBasedRoutingEnabled,
polL4NumRouters,
polL4NextHopTableLastChange,
polL4NextHopRouter,
polL4NextHopState,
polL4NextHopPortOfExit,
polL4NextHopMacAddress,
polL4NextHopLastChange,
polL4lowControlTableLastChange,
polL4NumPolicies,
polL4PolicyType,
polL4PolicyAction,
polL4PolicyMatch,
polL4PolicyNextHops,
polL4PolicyLoading,
polL4PolicyWatch,
polL4lowCreationTime,
polL4lowActiveGates,
polL4lowAppliedTimes,
polL4lowControlStatus,
polL4lowLostRouters,
polL4lowControlTableActivates,
polL4lowControlTableActivateFails,
polL4lowArpMappingChanges,
polL4lowIcmpRedirects,
polL4lowMatchAttempts
}
STATUS current
DESCRIPTION
"A set of managed objects that make up version 1.3 of the SSR Flow Policy MIB."
::= { polGroups 4 }
END
Reference in New Issue Copy Permalink