mibs/MIBS/equallogic/EQL-LLDP-MIB

-- Mib files packaged on  Tue Mar 17 11:28:59 EDT 2015 for Storage Array Firmware V7.1.5 (R408054)

EQL-LLDP-MIB DEFINITIONS ::= BEGIN

-- ******************************************************************
-- LLDP (IEEE 802.1AB) MIB
-- ******************************************************************

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    enterprises,
    Counter32,
    Counter64,
    Integer32,
    Unsigned32               FROM SNMPv2-SMI    -- [RFC2578]   
    TimeInterval,
    MacAddress,
    TruthValue               FROM SNMPv2-TC     -- [RFC2579]
    ifIndex                  FROM RFC1213-MIB
    equalLogic               FROM EQUALLOGIC-SMI
    eqlGroupId               FROM EQLGROUP-MIB
    eqlMemberIndex           FROM EQLMEMBER-MIB
   ;

eqlLldpMib MODULE-IDENTITY
	LAST-UPDATED "201503171528Z"
    ORGANIZATION "EqualLogic Inc."
    CONTACT-INFO
        "Contact: Customer Support
         Postal:  Dell Inc
                  300 Innovative Way, Suite 301, Nashua, NH 03062
         Tel:     +1 603-579-9762
         E-mail:  US-NH-CS-TechnicalSupport@dell.com
         WEB:     www.equallogic.com"

   DESCRIPTION 
        "Link Layer Discovery Protocol MIB module.
        Copyright (c) 2010-2012 by Dell Inc.

        All rights reserved.  This software may not be copied, disclosed,
        transferred, or used except in accordance with a license granted
        by Dell Inc.  This software embodies proprietary information
        and trade secrets of Dell Inc.

        Copyright (C) IEEE (2009). This version of this MIB module
        is published as subclause 11.5.1 of IEEE Std 802.1AB-2009;
        see the standard itself for full legal notices."
   REVISION       "201007230000Z"    -- 7/23/2010 00:00GMT
   DESCRIPTION 
      "Initial revision - based on IEEE 802.1AB-2009 Copyright (C) IEEE."
    ::= { enterprises equalLogic(12740) 21 }

eqlLldpMIBObjects      OBJECT IDENTIFIER ::= { eqlLldpMib 1 }

-------------------------------------------------------------------
-- IEEE 802.1AB - LLDP Textual Conventions
-------------------------------------------------------------------

EqlLldpV2ChassisIdSubtype ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This describes the source of a chassis identifier."
    SYNTAX      INTEGER {
        chassisComponent(1),
        interfaceAlias(2),
        portComponent(3),
        macAddress(4),
        networkAddress(5),
        interfaceName(6),
        local(7)
    }

EqlLldpV2ChassisId ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION
        "This describes the format of a chassis identifier string."
    SYNTAX      OCTET STRING (SIZE (255))

EqlLldpV2PortIdSubtype ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This describes the source of a particular type of port
        identifier used in the LLDP MIB."
    SYNTAX      INTEGER {
        interfaceAlias(1),
        portComponent(2),
        macAddress(3),
        networkAddress(4),
        interfaceName(5),
        agentCircuitId(6),
        local(7)
    }

EqlLldpV2PortId ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION
        "This describes the format of a port identifier string."
    SYNTAX      OCTET STRING (SIZE (1..255))

EqlLldpV2State ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This describes the state of LLDP for the port."
    SYNTAX      INTEGER {
        off(0),
        noPeer(1),
        active(2),
        multiplePeers(3)
    }


--
-- Dynamic LLDP interface table contains status information and
-- counters for LLDP.
--
eqlLldpDynamicIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EqlLldpDynamicIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "EqualLogic-Dynamic
        A table of LLDP information per each interface of a system.
        Each row in this table supplies values for one port's
        LLDP parameters."
    ::= { eqlLldpMIBObjects 1 }

eqlLldpDynamicIfEntry OBJECT-TYPE
    SYNTAX      EqlLldpDynamicIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "An entry in the LLDP table, containing information
        about LLDP on a single interface."
    INDEX { eqlGroupId, eqlMemberIndex, ifIndex }
    ::= { eqlLldpDynamicIfTable 1 }

EqlLldpDynamicIfEntry ::= SEQUENCE {
        eqlLldpRemMacAddress                    MacAddress,
        eqlLldpV2RemChassisIdSubtype            EqlLldpV2ChassisIdSubtype,
        eqlLldpV2RemChassisId                   EqlLldpV2ChassisId,
        eqlLldpV2RemPortIdSubtype               EqlLldpV2PortIdSubtype,
        eqlLldpV2RemPortId                      EqlLldpV2PortId,
        eqlLldpV2RemPortDesc                    OCTET STRING,
        eqlLldpV2RemSysName                     OCTET STRING,
        eqlLldpV2RemSysDesc                     OCTET STRING,
        eqlLldpV2State                          EqlLldpV2State,
        eqlLldpV2RemMgmtAddr                    OCTET STRING
    }

eqlLldpRemMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The MAC address associated with the LLDP peer."
    ::= { eqlLldpDynamicIfEntry 1 }

eqlLldpV2RemChassisIdSubtype OBJECT-TYPE
    SYNTAX          EqlLldpV2ChassisIdSubtype
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The type of encoding used to identify the chassis
        associated with the remote system."
    ::= { eqlLldpDynamicIfEntry 2 }

eqlLldpV2RemChassisId OBJECT-TYPE
    SYNTAX          EqlLldpV2ChassisId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The string value used to identify the chassis component
        associated with the remote system."
    ::= { eqlLldpDynamicIfEntry 3 }

eqlLldpV2RemPortIdSubtype OBJECT-TYPE
    SYNTAX          EqlLldpV2PortIdSubtype
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The type of encoding used to identify the port
        associated with the remote system."
    ::= { eqlLldpDynamicIfEntry 4 }

eqlLldpV2RemPortId OBJECT-TYPE
    SYNTAX          EqlLldpV2PortId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The string value used to identify the port component
        associated with the remote system."
    ::= { eqlLldpDynamicIfEntry 5 }

eqlLldpV2RemPortDesc OBJECT-TYPE
    SYNTAX          OCTET STRING  (SIZE (0..255))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The string value used to identify the description of
        the given port associated with the remote system."
    ::= { eqlLldpDynamicIfEntry 6 }

eqlLldpV2RemSysName OBJECT-TYPE
    SYNTAX          OCTET STRING  (SIZE (0..255))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The string value used to identify the system name of the
        remote system."
    ::= { eqlLldpDynamicIfEntry 7 }

eqlLldpV2RemSysDesc OBJECT-TYPE
SYNTAX              OCTET STRING  (SIZE (0..255))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The string value used to identify the system description
        of the remote system."
    ::= { eqlLldpDynamicIfEntry 8 }

eqlLldpV2State OBJECT-TYPE
    SYNTAX          EqlLldpV2State
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The current LLDP state for the port."
    ::= { eqlLldpDynamicIfEntry 9 }

eqlLldpV2RemMgmtAddr OBJECT-TYPE
SYNTAX              OCTET STRING  (SIZE (0..255))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The management address reported by the remote system.

        If multiple addresses were reported, they are delimited by
        commas."
    ::= { eqlLldpDynamicIfEntry 10 }

END