mibs/MIBS/equallogic/IPS-AUTH-MIB

--
-- Copyright (c) 2002-2006 by EqualLogic, Inc.
-- 
-- All rights reserved.  This software may not be copied, disclosed,
-- transferred, or used except in accordance with a license granted
-- by EqualLogic, Inc.  This software embodies proprietary information
-- and trade secrets of EqualLogic, Inc.
--

IPS-AUTH-MIB DEFINITIONS  ::= BEGIN

    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32,
    experimental
    FROM SNMPv2-SMI

    TEXTUAL-CONVENTION,
    RowStatus
    FROM SNMPv2-TC

    MODULE-COMPLIANCE,
    OBJECT-GROUP
    FROM SNMPv2-CONF
    ;

ipsAuthModule MODULE-IDENTITY
    LAST-UPDATED  "200206260000Z"
    ORGANIZATION  "IETF IPS Working Group"
    CONTACT-INFO
    "
    Mark Bakke
    Postal: Cisco Systems, Inc
    6450 Wedgwood Road, Suite 130
    Maple Grove, MN
    USA 55311

    Tel: +1 763-398-1000
    Fax: +1 763-398-1001

    E-mail: mbakke@cisco.com"

    DESCRIPTION
        "The IP Storage Authorization MIB module."

    REVISION "200206260000Z" -- June 26, 2002
    DESCRIPTION




        "Initial revision published as RFC xxxx."

--::= { mib-2 xx }
-- in case you want to COMPILE
::= { experimental 99999 }

ipsAuthObjects OBJECT IDENTIFIER ::= { ipsAuthModule 1 }
ipsAuthNotifications OBJECT IDENTIFIER ::= { ipsAuthModule 2 }
ipsAuthConformance OBJECT IDENTIFIER ::= { ipsAuthModule 3 }

-- Textual Conventions

IpsAuthAddress ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "IP Storage requires the use of address information
        that uses not only the InetAddress type defined in the
     INET-ADDRESS-MIB, but also Fibre Channel type defined
        in the Fibre Channel Management MIB. Although these
        address types are recognized in the IANA Address Family
        Numbers MIB, the addressing mechanisms have not been
        merged into a well-known, common type. This data type,
        the IpsAuthAddress, performs this function for this MIB."
    REFERENCE
        "IANA-ADDRESS-FAMILY-NUMBERS-MIB;
         INET-ADDRESS-MIB (RFC 2851);
         Fibre Channel Management MIB (presently defined in
         draft-ietf-ips-fcmgmt-mib-01.txt)."
    SYNTAX        OCTET STRING (SIZE(0..255))

------------------------------------------------------------------------

ipsAuthDescriptors OBJECT IDENTIFIER ::= { ipsAuthObjects 1 }

ipsAuthMethodTypes OBJECT IDENTIFIER ::= { ipsAuthDescriptors 1 }

ipsAuthMethodNone OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
     "The authoritative identifier when no authentication
     method is used."
    REFERENCE "iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 1 }

ipsAuthMethodSrp OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
     "The authoritative identifier when the authentication



     method is SRP."
    REFERENCE "iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 2 }

ipsAuthMethodChap OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
     "The authoritative identifier when the authentication
     method is CHAP."
    REFERENCE "iSCSI Protocol Specification."
::= { ipsAuthMethodTypes 3 }

----------------------------------------------------------------------

ipsAuthInstance OBJECT IDENTIFIER ::= { ipsAuthObjects 2 }

-- Instance Attributes Table

ipsAuthInstanceAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthInstanceAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A Dynamic list of iSCSI instances present on the system."
::= { ipsAuthInstance 2 }

ipsAuthInstanceAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthInstanceAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular iSCSI instance."
    INDEX { ipsAuthInstIndex }
::= { ipsAuthInstanceAttributesTable 1 }

IpsAuthInstanceAttributesEntry ::= SEQUENCE {
    ipsAuthInstIndex                 Unsigned32,
    ipsAuthInstDescr                 OCTET STRING -- was SnmpAdminString
}

ipsAuthInstIndex OBJECT-TYPE
    SYNTAX        Unsigned32 (1..4294967295)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An arbitrary integer used to uniquely identify a particular
        authentication instance."



::= { ipsAuthInstanceAttributesEntry 1 }

ipsAuthInstDescr OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE (0..255))  -- was SnmpAdminString
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "An octet string, determined by the implementation to describe
     the authentication instance.  When only a single instance is present,
     this object may be set to the zero-length string; with multiple
     authentication instances, it may be used in an implementation-dependent
     manner to describe the purpose of the respective instance."
::= { ipsAuthInstanceAttributesEntry 2 }


ipsAuthIdentity OBJECT IDENTIFIER ::= { ipsAuthObjects 3 }

-- iSCSI User Identity Attributes Table

ipsAuthIdentAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthIdentAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
     "A list of user identities, each belonging to a particular
     ipsAuthInstance."
::= { ipsAuthIdentity 1 }

ipsAuthIdentAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthIdentAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing management information
        describing a user identity
        within an authentication instance on this node."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex }
::= { ipsAuthIdentAttributesTable  1 }

IpsAuthIdentAttributesEntry ::= SEQUENCE {
    ipsAuthIdentIndex                   Unsigned32,
    ipsAuthIdentDescription            OCTET STRING,  -- was SnmpAdminString,
    ipsAuthIdentRowStatus               RowStatus
}

ipsAuthIdentIndex OBJECT-TYPE
    SYNTAX        Unsigned32 (1..4294967295)
    MAX-ACCESS    not-accessible



    STATUS        current
    DESCRIPTION
        "An arbitrary integer used to uniquely identify a particular
        identity instance within an authentication instance present
     on the node."
::= { ipsAuthIdentAttributesEntry 1 }

ipsAuthIdentDescription OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE  (0..255))  -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "An octet string describing this particular identity."
::= { ipsAuthIdentAttributesEntry 2 }

ipsAuthIdentRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthIdentAttributesEntry 3 }


ipsAuthIdentityName OBJECT IDENTIFIER ::= { ipsAuthObjects 4 }

-- iSCSI User Initiator Name Attributes Table

ipsAuthIdentNameAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthIdentNameAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of unique names that can be used to positively
     identify a particular user identity."
::= { ipsAuthIdentityName 1 }

ipsAuthIdentNameAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthIdentNameAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing management information
        applicable to a unique identity name which can be used
     to uniquely identify a user identity within a particular
     authentication instance."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthIdentNameIndex }



::= { ipsAuthIdentNameAttributesTable  1 }

IpsAuthIdentNameAttributesEntry ::= SEQUENCE {
    ipsAuthIdentNameIndex                   Unsigned32,
    ipsAuthIdentName                           OCTET STRING, -- was  SnmpAdminString,
    ipsAuthIdentNameRowStatus               RowStatus
}

ipsAuthIdentNameIndex OBJECT-TYPE
    SYNTAX        Unsigned32 (1..4294967295)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An arbitrary integer used to uniquely identify a particular
        identity name instance within an ipsAuthIdentity within an
     authentication instance."
::= { ipsAuthIdentNameAttributesEntry 1 }

ipsAuthIdentName OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE  (0..255))  -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "A character string which is the unique name of an
     identity that may be used to identify this
     ipsAuthIdent entry."
::= { ipsAuthIdentNameAttributesEntry 2 }

ipsAuthIdentNameRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthIdentNameAttributesEntry 3 }


ipsAuthIdentityAddress OBJECT IDENTIFIER ::= { ipsAuthObjects 5 }

-- iSCSI User Initiator Address Attributes Table

ipsAuthIdentAddrAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthIdentAddrAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of address ranges that are allowed to serve



     as the endpoint addresses of a particular identity.
     An address range includes a starting and ending address
     and an optional netmask, and an address type indicator,
     which can specify whether the address is IPv4, IPv6,
     FC-WWPN, or FC-WWNN."
::= { ipsAuthIdentityAddress 1 }

ipsAuthIdentAddrAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthIdentAddrAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing management information
        applicable to an address range which is used as part
     of the authentication of an identity
        within an authentication instance on this node."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthIdentAddrIndex }
::= { ipsAuthIdentAddrAttributesTable  1 }

IpsAuthIdentAddrAttributesEntry ::= SEQUENCE {
    ipsAuthIdentAddrIndex                   Unsigned32,
    ipsAuthIdentAddrType                    INTEGER, -- was AddressFamilyNumbers,
    ipsAuthIdentAddrStart                   IpsAuthAddress,
    ipsAuthIdentAddrEnd                     IpsAuthAddress,
    ipsAuthIdentAddrRowStatus               RowStatus
}

ipsAuthIdentAddrIndex OBJECT-TYPE
    SYNTAX        Unsigned32 (1..4294967295)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An arbitrary integer used to uniquely identify a particular
        ipsAuthIdentAddress instance within an ipsAuthIdentity within an
     authentication instance present on the node."
::= { ipsAuthIdentAddrAttributesEntry 1 }

ipsAuthIdentAddrType OBJECT-TYPE
    SYNTAX       INTEGER -- was  AddressFamilyNumbers
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "The type of Address in the ipsAuthIdentAddress start, end,
     and mask fields.  This type is taken from the IANA address
     family types; more types may be registered independently
     of this MIB."
::= { ipsAuthIdentAddrAttributesEntry 2 }




ipsAuthIdentAddrStart OBJECT-TYPE
    SYNTAX        IpsAuthAddress
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "The starting address of the allowed address range."
::= { ipsAuthIdentAddrAttributesEntry 3 }

ipsAuthIdentAddrEnd OBJECT-TYPE
    SYNTAX        IpsAuthAddress
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "The ending address of the allowed address range.  If the
         ipsAuthIdentAddrEntry specifies a single address, this shall
         match the ipsAuthIdentAddrStart."
::= { ipsAuthIdentAddrAttributesEntry 4 }


ipsAuthIdentAddrRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthIdentAddrAttributesEntry 5 }


ipsAuthCredential OBJECT IDENTIFIER ::= { ipsAuthObjects 6 }

-- Identity Credential Attributes Table

ipsAuthCredentialAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthCredentialAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of credentials related to user identities
     that are allowed as valid authenticators of the
     particular identity."
::= { ipsAuthCredential 1 }

ipsAuthCredentialAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthCredentialAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION



        "An entry (row) containing management information
        applicable to a credential which authenticates a user
        identity within an authentication instance."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredentialAttributesTable  1 }

IpsAuthCredentialAttributesEntry ::= SEQUENCE {
    ipsAuthCredIndex                   Unsigned32,
    ipsAuthCredAuthMethod          INTEGER, -- was    AutonomousType need to support
    ipsAuthCredRowStatus               RowStatus
}

ipsAuthCredIndex OBJECT-TYPE
    SYNTAX        Unsigned32 (1..4294967295)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An arbitrary integer used to uniquely identify a particular
        iSCSI Credential instance within an iSCSI instance present on the
        node."
::= { ipsAuthCredentialAttributesEntry 1 }

ipsAuthCredAuthMethod OBJECT-TYPE
    SYNTAX        INTEGER  -- was AutonomousType need to support
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
     "This object contains an OBJECT IDENTIFIER
     which identifies the authentication method
     used with this credential.

     Some standardized values for this object are defined
     within the ipsAuthMethods subtree."
::= { ipsAuthCredentialAttributesEntry 2 }

ipsAuthCredRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthCredentialAttributesEntry 3 }

ipsAuthCredChap OBJECT IDENTIFIER ::= { ipsAuthObjects 7 }

-- Credential Chap-Specific Attributes Table




ipsAuthCredChapAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthCredChapAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of CHAP attributes for credentials that
     have their ipsAuthCredAuthMethod == ipsAuthMethodChap.
     -ReplicateOnCreate"
::= { ipsAuthCredChap 1 }

ipsAuthCredChapAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthCredChapAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing management information
        applicable to a credential which has the ipsAuthCredAuthMethod
     set to the OID of ipsAuthMethodChap."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredChapAttributesTable  1 }

IpsAuthCredChapAttributesEntry ::= SEQUENCE {
    ipsAuthCredChapUserName           OCTET STRING, -- was  SnmpAdminString,
    ipsAuthCredChapPassword            OCTET STRING, -- was SnmpAdminString,
    ipsAuthCredChapRowStatus           RowStatus
}

ipsAuthCredChapUserName OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE (0..255)) -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "EQL-SECONDARY-KEY
         An octet string containing the CHAP user name for this
     credential."
::= { ipsAuthCredChapAttributesEntry 1 }

ipsAuthCredChapPassword OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE (0..255)) -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "An octet string containing the password for this
     credential.  If written, it changes the password for
     the credential.  If read, it returns a zero-length
     string."
     --DEFAULT       cookie "secure"
::= { ipsAuthCredChapAttributesEntry 2 }

ipsAuthCredChapRowStatus OBJECT-TYPE
    SYNTAX        RowStatus



    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthCredChapAttributesEntry 3 }


ipsAuthCredSrp OBJECT IDENTIFIER ::= { ipsAuthObjects 8 }

-- Credential Srp-Specific Attributes Table

ipsAuthCredSrpAttributesTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF IpsAuthCredSrpAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of SRP-specific attributes for credentials that
     have their ipsAuthCredAuthMethod == ipsAuthMethodSrp."
::= { ipsAuthCredSrp 1 }

ipsAuthCredSrpAttributesEntry OBJECT-TYPE
    SYNTAX        IpsAuthCredSrpAttributesEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry (row) containing management information
        applicable to a credential which has the ipsAuthCredAuthMethod
     set to the OID of ipsAuthMethodSrp."
    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
::= { ipsAuthCredSrpAttributesTable  1 }

IpsAuthCredSrpAttributesEntry ::= SEQUENCE {
    ipsAuthCredSrpUserName            OCTET STRING, -- was SnmpAdminString,
    ipsAuthCredSrpPassword            OCTET STRING, -- was SnmpAdminString,
    ipsAuthCredSrpRowStatus           RowStatus
}

ipsAuthCredSrpUserName OBJECT-TYPE
    SYNTAX        OCTET STRING  (SIZE (0..255)) -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "An octet string containing the CHAP user name for this
     credential."
::= { ipsAuthCredSrpAttributesEntry 1 }

ipsAuthCredSrpPassword OBJECT-TYPE



    SYNTAX        OCTET STRING  (SIZE (0..255)) -- was SnmpAdminString
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "An octet string containing the password for this
     credential.  If written, it changes the password for
     the credential.  If read, it returns a zero-length
     string."
::= { ipsAuthCredSrpAttributesEntry 2 }

ipsAuthCredSrpRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This field allows entries to be dynamically added and
     removed from this table via SNMP."
::= { ipsAuthCredSrpAttributesEntry 3 }

------------------------------------------------------------------------
-- Notifications

-- There are no notifications necessary in this MIB.

------------------------------------------------------------------------

-- Conformance Statements

ipsAuthGroups OBJECT IDENTIFIER ::= { ipsAuthConformance 1 }

ipsAuthInstanceAttributesGroup OBJECT-GROUP
    OBJECTS {
        ipsAuthInstDescr
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about
     authentication instances."
::= { ipsAuthGroups 1 }

ipsAuthIdentAttributesGroup OBJECT-GROUP
    OBJECTS {
        ipsAuthIdentDescription,
    ipsAuthIdentRowStatus
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about



     user identities within an authentication instance."
::= { ipsAuthGroups 2 }

ipsAuthIdentNameAttributesGroup OBJECT-GROUP
    OBJECTS {
    ipsAuthIdentName,
    ipsAuthIdentNameRowStatus
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about
     user names within user identities within an authentication
     instance."
::= { ipsAuthGroups 3 }

ipsAuthIdentAddrAttributesGroup OBJECT-GROUP
    OBJECTS {
    ipsAuthIdentAddrType,
    ipsAuthIdentAddrStart,
    ipsAuthIdentAddrEnd,
    ipsAuthIdentAddrRowStatus
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about
     address ranges within user identities within an authentication
     instance."
::= { ipsAuthGroups 4 }

ipsAuthIdentCredAttributesGroup OBJECT-GROUP
    OBJECTS {
    ipsAuthCredAuthMethod,
    ipsAuthCredRowStatus
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about
     credentials within user identities within an authentication
     instance."
::= { ipsAuthGroups 5 }

ipsAuthIdentChapAttrGroup OBJECT-GROUP
    OBJECTS {
    ipsAuthCredChapUserName,
    ipsAuthCredChapPassword,
    ipsAuthCredChapRowStatus
    }
    STATUS current



    DESCRIPTION
        "A collection of objects providing information about CHAP
     credentials within user identities within an authentication
     instance."
::= { ipsAuthGroups 6 }

ipsAuthIdentSrpAttrGroup OBJECT-GROUP
    OBJECTS {
    ipsAuthCredSrpUserName,
    ipsAuthCredSrpPassword,
    ipsAuthCredSrpRowStatus
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing information about SRP
     credentials within user identities within an authentication
     instance."
::= { ipsAuthGroups 7 }

------------------------------------------------------------------------

ipsAuthCompliances OBJECT IDENTIFIER ::= { ipsAuthConformance 2 }

ipsAuthComplianceV1 MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "Initial version of compliance statement based on
        initial version of MIB.

     The Instance and Identity groups are mandatory;
     at least one of the other groups (Name, Address,
     Credential, Certificate) is also mandatory for
     any given implementation."
    MODULE       -- this module
    MANDATORY-GROUPS {
        ipsAuthInstanceAttributesGroup,
        ipsAuthIdentAttributesGroup
    }

    -- Conditionally mandatory groups to be included with
    -- the mandatory groups when necessary.

    GROUP ipsAuthIdentNameAttributesGroup
    DESCRIPTION
        "This group is mandatory for all implementations
     that make use of unique identity names."

    GROUP ipsAuthIdentAddrAttributesGroup



    DESCRIPTION
        "This group is mandatory for all implementations
     that use addresses to help authenticate identities."

    GROUP ipsAuthIdentCredAttributesGroup
    DESCRIPTION
        "This group is mandatory for all implementations
     that use credentials to help authenticate identities."

::= { ipsAuthCompliances 1 }

END