2549 lines
92 KiB
Plaintext
2549 lines
92 KiB
Plaintext
|
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2002 by EqualLogic, Inc.
|
||
|
|
--
|
||
|
|
-- All rights reserved. This software may not be copied, disclosed,
|
||
|
|
-- transferred, or used except in accordance with a license granted
|
||
|
|
-- by EqualLogic, Inc. This software embodies proprietary information
|
||
|
|
-- and trade secrets of EqualLogic, Inc.
|
||
|
|
--
|
||
|
|
|
||
|
|
SCSI-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
||
|
|
Integer32, Unsigned32, Counter32,
|
||
|
|
Counter64, Gauge32,
|
||
|
|
mib-2 FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION, TimeStamp, TruthValue,
|
||
|
|
RowStatus, RowPointer, AutonomousType FROM SNMPv2-TC
|
||
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
||
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
scsiModule MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200202250000Z" -- 25 February 2002
|
||
|
|
ORGANIZATION "IETF"
|
||
|
|
CONTACT-INFO "
|
||
|
|
Michele Hallak-Stamler
|
||
|
|
|
||
|
|
Sanrad Intelligent Network
|
||
|
|
32 Habarzel Street
|
||
|
|
Tel Aviv, Israel
|
||
|
|
|
||
|
|
Phone: +972 3 7674809
|
||
|
|
E-mail: michele@sanrad.com
|
||
|
|
|
||
|
|
|
||
|
|
Yaron Lederman
|
||
|
|
Siliquent Technologies Ltd.
|
||
|
|
33 Bezalel Street
|
||
|
|
Ramat Gan, Israel
|
||
|
|
|
||
|
|
Phone: +972 3 7552320
|
||
|
|
E-mail: yaronl@siliquent.com
|
||
|
|
|
||
|
|
Mark Bakke
|
||
|
|
Postal: Cisco Systems, Inc
|
||
|
|
6450 Wedgwood Road, Suite 130
|
||
|
|
Maple Grove, MN
|
||
|
|
USA 55311
|
||
|
|
|
||
|
|
Phone: +1 763-398-1000
|
||
|
|
Fax: +1 763-398-1001
|
||
|
|
E-mail: mbakke@cisco.com
|
||
|
|
|
||
|
|
Marjorie Krueger
|
||
|
|
Postal: Hewlett-Packard
|
||
|
|
Networked Storage Architecture
|
||
|
|
Networked Storage Solutions Org.
|
||
|
|
8000 Foothills Blvd.
|
||
|
|
Roseville, CA 95747
|
||
|
|
|
||
|
|
Phone: +1 916-785-2656
|
||
|
|
Phone: +1 916-785-0391
|
||
|
|
E-mail: marjorie_krueger@hp.com
|
||
|
|
|
||
|
|
Keith McCloghrie
|
||
|
|
Cisco Systems, Inc.
|
||
|
|
Postal: 170 West Tasman Drive
|
||
|
|
San Jose, CA USA 95134
|
||
|
|
|
||
|
|
Phone: +1 408 526-5260
|
||
|
|
E-mail: kzm@cisco.com
|
||
|
|
|
||
|
|
"
|
||
|
|
DESCRIPTION
|
||
|
|
"The SCSI MIB"
|
||
|
|
|
||
|
|
-- Revision History
|
||
|
|
|
||
|
|
REVISION "200202250000Z"
|
||
|
|
DESCRIPTION " Initial version published as RFC nnnn."
|
||
|
|
|
||
|
|
::= { mib-2 999} -- must be changed in the future
|
||
|
|
|
||
|
|
|
||
|
|
---------------------- Textual Conventions -------------------------
|
||
|
|
ScsiLUNOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This Textual Convention represents either a SCSI Logical
|
||
|
|
Unit Number (LUN) or a zero-length string. Objects defined
|
||
|
|
with this syntax must specify the meaning of the zero-length
|
||
|
|
string. The format of a LUN is:
|
||
|
|
- a zero-length octet string or
|
||
|
|
- a string of two octets if the underlying transport protocol
|
||
|
|
is SBP-3 or SPI-4 using data group transfers or
|
||
|
|
- a string of eight octets for all other cases."
|
||
|
|
SYNTAX OCTET STRING (SIZE (0 | 2 | 8))
|
||
|
|
|
||
|
|
ScsiIndexValue ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" An arbitrary integer value, greater than zero, for use as a
|
||
|
|
unique index value."
|
||
|
|
SYNTAX Unsigned32(1..4294967295)
|
||
|
|
|
||
|
|
ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This textual convention is an extension of the
|
||
|
|
ScsiIndexValue convention. The latter defines a greater than
|
||
|
|
zero value used to identify an index. This extension permits
|
||
|
|
the additional value of zero and is applicable only to
|
||
|
|
indices of SCSI port. Usage of the zero is object-specific
|
||
|
|
and must therefore be defined as part of the description of
|
||
|
|
any object, which uses this syntax. Examples of the usage of
|
||
|
|
zero might include situations where index was unknown, or
|
||
|
|
when none or all indices need to be referenced."
|
||
|
|
SYNTAX Unsigned32(0..4294967295)
|
||
|
|
|
||
|
|
ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This textual convention is an extension of the
|
||
|
|
ScsiIndexValue convention. The latter defines a greater than
|
||
|
|
zero value used to identify an index. This extension permits
|
||
|
|
the additional value of zero. Usage of the zero is object-
|
||
|
|
specific and must therefore be defined as part of the
|
||
|
|
description of any object, which uses this syntax. Examples
|
||
|
|
of the usage of zero might include situations where index was
|
||
|
|
unknown, or when none or all indices need to be referenced."
|
||
|
|
SYNTAX Unsigned32(0..4294967295)
|
||
|
|
|
||
|
|
ScsiIdentifier ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This Textual Convention represents a generic SCSI device or
|
||
|
|
port identifier.
|
||
|
|
The format depends on the transport used:
|
||
|
|
- SPI: only bits:0-3 for a port identifier (LSB is 0 and MSB
|
||
|
|
is 3). Other bits must be zero.
|
||
|
|
- SPI: identifier of a device is a zero-length octet string.
|
||
|
|
- FCP: 3 bytes for a port identifier
|
||
|
|
- FCP: identifier of a device is a zero-length octet string.
|
||
|
|
- SRP: 16 bytes for a port identifier.
|
||
|
|
- SRP: it is a zero-length octet string for a device
|
||
|
|
identifier.
|
||
|
|
- iSCSI: 256 bytes for a device identifier.
|
||
|
|
- iSCSI: 258 bytes for a target port identifier.
|
||
|
|
- iSCSI: 262 bytes for an initiator port identifier.
|
||
|
|
- SBP: it is a zero-length octet string for a device
|
||
|
|
identifier.
|
||
|
|
- SBP: 2 bytes for an initiator port identifier.
|
||
|
|
- SBP: 11 bytes for a target port identifier. "
|
||
|
|
SYNTAX OCTET STRING (SIZE (0 | 1 | 2 | 3| 11 | 16 | 256| 258|262))
|
||
|
|
|
||
|
|
ScsiName ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This Textual Convention represents a generic SCSI device or
|
||
|
|
port name.
|
||
|
|
The format depends on the transport used:
|
||
|
|
- SPI: it is a zero-length octet string for a device or port
|
||
|
|
name.
|
||
|
|
- FCP: 8 bytes for a port name.
|
||
|
|
- FCP: it is a zero-length octet string for a device name.
|
||
|
|
- SRP: 16 bytes for a port name.
|
||
|
|
- SRP: it is a zero-length octet string for a device name.
|
||
|
|
- iSCSI: 256 bytes for a device name.
|
||
|
|
- iSCSI: 258 bytes for a target port name.
|
||
|
|
- iSCSI: 262 bytes for an initiator port name.
|
||
|
|
- SBP: it is a zero-length octet string for a device name.
|
||
|
|
- SBP: 8 bytes for an initiator port name.
|
||
|
|
- SBP: 11 bytes for a target port name. "
|
||
|
|
SYNTAX OCTET STRING (SIZE (0 | 8 | 11 |16 | 256 | 258| 262))
|
||
|
|
|
||
|
|
ScsiNameIdOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This Textual Convention represents either the SCSI name of
|
||
|
|
a logical unit or a zero-length string. Objects defined with
|
||
|
|
this syntax must specify the meaning of the zero-length
|
||
|
|
string. The format of the name of a LU is:
|
||
|
|
- a zero-length octet string or
|
||
|
|
- a string of eight octets."
|
||
|
|
SYNTAX OCTET STRING (SIZE (0 | 8))
|
||
|
|
|
||
|
|
ScsiDeviceOrPort ::= TEXTUAL-CONVENTION
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type specifies whether a particular configuration is
|
||
|
|
applicable to a port or to a device."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
device(1),
|
||
|
|
port(2),
|
||
|
|
other(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
ScsiIdCodeSet ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Textual Convention specifies the code set in use with
|
||
|
|
this identifier.
|
||
|
|
The format is the same as contained in the identifier's
|
||
|
|
Identification Descriptor within the Logical Unit's Device
|
||
|
|
Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18
|
||
|
|
July 2001 Chapter 8: section 8.4.4, page 210 Vital Product
|
||
|
|
Data Parameters [16]"
|
||
|
|
SYNTAX Unsigned32(0..15)
|
||
|
|
|
||
|
|
ScsiIdAssociation ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Textual Convention specifies what the identifier is
|
||
|
|
associated with (e.g, with the addressed physical/logical
|
||
|
|
device or with a particular port).
|
||
|
|
The format is the same as contained in the identifier's
|
||
|
|
Identification Descriptor within the Logical Unit's Device
|
||
|
|
Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18
|
||
|
|
July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product
|
||
|
|
Data Parameters [16]"
|
||
|
|
SYNTAX Unsigned32(0..3)
|
||
|
|
|
||
|
|
ScsiIdType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Textual Convention specifies the type of the
|
||
|
|
identifier.
|
||
|
|
The format is the same as contained in the identifier's
|
||
|
|
Identification Descriptor within the Logical Unit's Device
|
||
|
|
Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
SYNTAX Unsigned32(0..15)
|
||
|
|
|
||
|
|
|
||
|
|
ScsiIdValue ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Textual Convention represents an identifier. The
|
||
|
|
objects of type ScsiIdCodeSet, ScsIdAssociation, ScsiIdType,
|
||
|
|
define together the format.
|
||
|
|
The format is the same as contained in the identifier's
|
||
|
|
Identification Descriptor within the Logical Unit's Device
|
||
|
|
Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18
|
||
|
|
July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product
|
||
|
|
Data Parameters [16]"
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
|
||
|
|
|
||
|
|
HrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index value for a software module's row in the Host
|
||
|
|
Resources MIB's hrSWInstalledTable. A zero value indicates
|
||
|
|
that no row in the hrSWInstalledTable is applicable."
|
||
|
|
REFERENCE
|
||
|
|
"hrSWInstalledTable is defined in the Host Resources MIB, RFC
|
||
|
|
2790."
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
|
||
|
|
----------------------- Structure of the MIB ----------------------
|
||
|
|
|
||
|
|
scsiObjects OBJECT IDENTIFIER ::= { scsiModule 1 }
|
||
|
|
scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 }
|
||
|
|
scsiConformance OBJECT IDENTIFIER ::= { scsiModule 3 }
|
||
|
|
|
||
|
|
scsiTransportTypes OBJECT IDENTIFIER ::= { scsiObjects 1 }
|
||
|
|
scsiGeneral OBJECT IDENTIFIER ::= { scsiObjects 2 }
|
||
|
|
scsiInitiator OBJECT IDENTIFIER ::= { scsiObjects 3 }
|
||
|
|
scsiTarget OBJECT IDENTIFIER ::= { scsiObjects 4 }
|
||
|
|
scsiLogicalUnit OBJECT IDENTIFIER ::= { scsiObjects 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Transport Types
|
||
|
|
scsiTranportOther OBJECT IDENTIFIER ::= { scsiTransportTypes 1 }
|
||
|
|
scsiTranportSPI OBJECT IDENTIFIER ::= { scsiTransportTypes 2 }
|
||
|
|
scsiTransportFCP OBJECT IDENTIFIER ::= { scsiTransportTypes 3 }
|
||
|
|
scsiTransportSRP OBJECT IDENTIFIER ::= { scsiTransportTypes 4 }
|
||
|
|
scsiTransportISCSI OBJECT IDENTIFIER ::= { scsiTransportTypes 5 }
|
||
|
|
scsiTransportSBP OBJECT IDENTIFIER ::= { scsiTransportTypes 6 }
|
||
|
|
|
||
|
|
|
||
|
|
----------------------- Instance Table -----------------------------
|
||
|
|
scsiInstanceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiInstanceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SCSI instances present on the system.
|
||
|
|
The SCSI Instance is the top-level entity, to which
|
||
|
|
everything else belongs. An SNMP agent could represent more
|
||
|
|
than one instance if it represents either a stack of devices,
|
||
|
|
or virtual partitions of a larger device, or a host running
|
||
|
|
multiple SCSI implementations from different vendors."
|
||
|
|
::= { scsiGeneral 1 }
|
||
|
|
|
||
|
|
scsiInstanceEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiInstanceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing management information applicable
|
||
|
|
to a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex }
|
||
|
|
::= { scsiInstanceTable 1 }
|
||
|
|
|
||
|
|
ScsiInstanceEntry::= SEQUENCE {
|
||
|
|
scsiInstIndex ScsiIndexValue,
|
||
|
|
scsiInstAlias SnmpAdminString,
|
||
|
|
scsiInstSoftwareIndex HrSWInstalledIndexOrZero,
|
||
|
|
scsiInstVendorVersion SnmpAdminString,
|
||
|
|
scsiInstScsiNotificationsEnable TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiInstIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents an arbitrary integer used to uniquely
|
||
|
|
identify a particular SCSI instance."
|
||
|
|
::= { scsiInstanceEntry 1 }
|
||
|
|
|
||
|
|
scsiInstAlias OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE(0..79))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents an administrative string, configured
|
||
|
|
by the administrator. It can be a zero-length string."
|
||
|
|
::= { scsiInstanceEntry 2 }
|
||
|
|
|
||
|
|
scsiInstSoftwareIndex OBJECT-TYPE
|
||
|
|
SYNTAX HrSWInstalledIndexOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If this management instance corresponds to an installed
|
||
|
|
software module, then this object's value is the value of the
|
||
|
|
|
||
|
|
hrSWInstalledIndex of that module. If there is no
|
||
|
|
correspondence to an installed software module (or no module
|
||
|
|
which has a hrSWInstalledIndex value), then the value of this
|
||
|
|
object is zero."
|
||
|
|
REFERENCE
|
||
|
|
"hrSWInstalledIndex is defined in the Host Resources MIB, RFC
|
||
|
|
2790."
|
||
|
|
::= { scsiInstanceEntry 3 }
|
||
|
|
|
||
|
|
scsiInstVendorVersion OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString(SIZE(0..79))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents a text string set by the manufacturer
|
||
|
|
describing the version of this instance. The format of this
|
||
|
|
string is determined solely by the manufacturer, and is for
|
||
|
|
informational purposes only. It is unrelated to the SCSI
|
||
|
|
specification version numbers."
|
||
|
|
::= { scsiInstanceEntry 4 }
|
||
|
|
|
||
|
|
scsiInstScsiNotificationsEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object allows to enable/disable sending all the
|
||
|
|
notifications defined in this MIB."
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { scsiInstanceEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiDeviceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiDeviceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SCSI Devices present on the system."
|
||
|
|
::= { scsiGeneral 2 }
|
||
|
|
|
||
|
|
scsiDeviceEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDeviceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing management information applicable
|
||
|
|
to a particular SCSI Device included in this SCSI manageable
|
||
|
|
instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex }
|
||
|
|
::= { scsiDeviceTable 1 }
|
||
|
|
|
||
|
|
ScsiDeviceEntry::= SEQUENCE {
|
||
|
|
|
||
|
|
scsiDeviceIndex ScsiIndexValue,
|
||
|
|
scsiDeviceAlias SnmpAdminString,
|
||
|
|
scsiDeviceRole BITS,
|
||
|
|
scsiDevicePortNumber Unsigned32,
|
||
|
|
scsiDeviceResets Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiDeviceIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object is an arbitrary integer used to uniquely
|
||
|
|
identify a particular device within a particular SCSI
|
||
|
|
instance."
|
||
|
|
::= { scsiDeviceEntry 1 }
|
||
|
|
|
||
|
|
scsiDeviceAlias OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE(0..79))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents is an admistrative name for this
|
||
|
|
device. If no name is assigned, the value of this object is
|
||
|
|
the zero-length string."
|
||
|
|
::= { scsiDeviceEntry 2 }
|
||
|
|
|
||
|
|
scsiDeviceRole OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
target(0),
|
||
|
|
initiator(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object determines whether this device is acting as an
|
||
|
|
initiator device, or as a target device or as both."
|
||
|
|
::= { scsiDeviceEntry 3 }
|
||
|
|
|
||
|
|
scsiDevicePortNumber OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of ports contained in this
|
||
|
|
device."
|
||
|
|
::= { scsiDeviceEntry 4 }
|
||
|
|
|
||
|
|
scsiDeviceResets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"This object represents the number of times that this device
|
||
|
|
has reset."
|
||
|
|
::= { scsiDeviceEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
----------------------- Port Table ---------------------------------
|
||
|
|
scsiPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SCSI Ports for each SCSI device in each instance."
|
||
|
|
::= { scsiGeneral 3 }
|
||
|
|
|
||
|
|
scsiPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing management information applicable
|
||
|
|
to a particular SCSI port of a particular SCSI device in a
|
||
|
|
particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
|
||
|
|
::= { scsiPortTable 1 }
|
||
|
|
|
||
|
|
ScsiPortEntry ::= SEQUENCE {
|
||
|
|
scsiPortIndex ScsiIndexValue,
|
||
|
|
scsiPortRole BITS,
|
||
|
|
scsiPortTrnsptPtr OCTET STRING, -- was RowPointer,
|
||
|
|
scsiPortBusyStatuses Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An arbitrary integer used to uniquely identify a particular
|
||
|
|
port of a given device within a particular SCSI instance."
|
||
|
|
::= { scsiPortEntry 1 }
|
||
|
|
|
||
|
|
scsiPortRole OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
target(0),
|
||
|
|
initiator(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates whether this port is acting as an
|
||
|
|
initiator port, or as a target port or as both."
|
||
|
|
::= { scsiPortEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiPortTrnsptPtr OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is a pointer to the corresponding row in the
|
||
|
|
scsiTrnsptTable"
|
||
|
|
::= { scsiPortEntry 3 }
|
||
|
|
|
||
|
|
scsiPortBusyStatuses OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of port busy status sent
|
||
|
|
or received by this port. Note: Initiator ports only receive
|
||
|
|
busy status and target ports only send busy status."
|
||
|
|
::= { scsiPortEntry 4 }
|
||
|
|
|
||
|
|
scsiTrnsptTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiTrnsptEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains a list of transports in use with each
|
||
|
|
SCSI device."
|
||
|
|
::= { scsiGeneral 5 }
|
||
|
|
|
||
|
|
scsiTrnsptEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiTrnsptEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing parameters applicable to a
|
||
|
|
transport used by a particular device of a particular SCSI
|
||
|
|
manageable instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiTrnsptIndex}
|
||
|
|
::= { scsiTrnsptTable 1 }
|
||
|
|
|
||
|
|
ScsiTrnsptEntry ::= SEQUENCE {
|
||
|
|
scsiTrnsptIndex ScsiIndexValue,
|
||
|
|
scsiTrnsptType OCTET STRING, -- was AutonomousType,
|
||
|
|
scsiTrnsptPointer OCTET STRING, -- was RowPointer,
|
||
|
|
scsiTrnsptDevName ScsiName
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiTrnsptIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"An arbitrary integer used to uniquely identify a particular
|
||
|
|
transport within a given device within a particular SCSI
|
||
|
|
instance."
|
||
|
|
::= { scsiTrnsptEntry 1 }
|
||
|
|
|
||
|
|
scsiTrnsptType OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255)) -- was AutonomousType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the type of transport for this
|
||
|
|
particular transport."
|
||
|
|
::= { scsiTrnsptEntry 2 }
|
||
|
|
|
||
|
|
scsiTrnsptPointer OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents a pointer to a conceptual row in a
|
||
|
|
'transport' MIB allowing a manager to get useful information
|
||
|
|
for the transport described by this entry.
|
||
|
|
For example, if the transport of this device is iSCSI, this
|
||
|
|
object will point to the iSCSI Instance of the iSCSI MIB.
|
||
|
|
If there is no MIB for this transport, this object has the
|
||
|
|
value 0.0."
|
||
|
|
::= { scsiTrnsptEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiTrnsptDevName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the name of this device in one of
|
||
|
|
the format(s) appropriate for this type of transport."
|
||
|
|
::= { scsiTrnsptEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
----------------------- Initiator Device Table ---------------------
|
||
|
|
scsiIntrDevTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiIntrDevEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains information for each local initiator
|
||
|
|
device."
|
||
|
|
::= { scsiInitiator 1}
|
||
|
|
|
||
|
|
scsiIntrDevEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIntrDevEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing information applicable to an
|
||
|
|
initiator device within a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex }
|
||
|
|
::= { scsiIntrDevTable 1 }
|
||
|
|
|
||
|
|
ScsiIntrDevEntry ::= SEQUENCE {
|
||
|
|
scsiIntrDevTgtAccessMode INTEGER,
|
||
|
|
scsiIntrDevOutResets Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiIntrDevTgtAccessMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
autoEnable(2),
|
||
|
|
manualEnable(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls whether a discovered target is
|
||
|
|
immediately authorized or not:
|
||
|
|
- autoEnable (2) means that when an initiator discovers a
|
||
|
|
target, it can use it immediately,
|
||
|
|
- manualEnable (3) means that the initiator must wait for an
|
||
|
|
operator to set scsiIntrDscTgtConfigured = true before it is
|
||
|
|
authorized."
|
||
|
|
::= { scsiIntrDevEntry 1 }
|
||
|
|
|
||
|
|
scsiIntrDevOutResets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of resets sent by this
|
||
|
|
initiator."
|
||
|
|
::= { scsiIntrDevEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- The following section describes managed objects related to
|
||
|
|
-- initiator ports.
|
||
|
|
scsiIntrPrtTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiIntrPrtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all the initiator ports of local SCSI
|
||
|
|
Initiator or Target/Initiator devices."
|
||
|
|
::= { scsiInitiator 3 }
|
||
|
|
|
||
|
|
scsiIntrPrtEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIntrPrtEntry
|
||
|
|
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing information applicable to a
|
||
|
|
particular initiator port of a particular device within a
|
||
|
|
SCSI instance. "
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
|
||
|
|
::= { scsiIntrPrtTable 1 }
|
||
|
|
|
||
|
|
ScsiIntrPrtEntry ::= SEQUENCE {
|
||
|
|
scsiIntrPrtName ScsiName,
|
||
|
|
scsiIntrPrtIdentifier ScsiIdentifier,
|
||
|
|
scsiIntrPrtOutCommands Counter32,
|
||
|
|
scsiIntrPrtWrittenMegaBytes Counter32,
|
||
|
|
scsiIntrPrtReadMegaBytes Counter32,
|
||
|
|
scsiIntrPrtHSOutCommands Counter64
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiIntrPrtName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the name of the port assigned for
|
||
|
|
use by the SCSI protocol. The format will depend of the type
|
||
|
|
of transport this port is using."
|
||
|
|
::= { scsiIntrPrtEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiIntrPrtIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdentifier
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the identifier of the port in one of
|
||
|
|
the format(s) appropriate for the type of transport in use."
|
||
|
|
::= { scsiIntrPrtEntry 2 }
|
||
|
|
|
||
|
|
scsiIntrPrtOutCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of commands sent by this
|
||
|
|
initiator."
|
||
|
|
::= { scsiIntrPrtEntry 3 }
|
||
|
|
|
||
|
|
scsiIntrPrtWrittenMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the amount of data in Megabytes sent
|
||
|
|
by this initiator."
|
||
|
|
::= { scsiIntrPrtEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiIntrPrtReadMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the amount of data in Megabytes
|
||
|
|
received by this initiator."
|
||
|
|
::= { scsiIntrPrtEntry 5 }
|
||
|
|
|
||
|
|
scsiIntrPrtHSOutCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of commands sent by this
|
||
|
|
initiator device. This object provides support for systems
|
||
|
|
which can quickly generate lots of commands because they run
|
||
|
|
at high speed."
|
||
|
|
::= { scsiIntrPrtEntry 6 }
|
||
|
|
|
||
|
|
scsiRemoteTarget OBJECT IDENTIFIER ::= { scsiInitiator 4 }
|
||
|
|
|
||
|
|
-- Targets discovered or authorized to attach each of the initiator
|
||
|
|
-- ports of each initiator device of each instance.
|
||
|
|
scsiDscTgtTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiDscTgtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the remote (not in the local system)
|
||
|
|
target ports that are authorized to attach to each local
|
||
|
|
initiator port of this SCSI instance."
|
||
|
|
::= { scsiRemoteTarget 1 }
|
||
|
|
|
||
|
|
scsiDscTgtEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDscTgtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents an authorization for one or all
|
||
|
|
local initiator ports of a local device (scsiDeviceIndex)
|
||
|
|
within a local SCSI instance (scsiInstIndex), to attach to a
|
||
|
|
remote target port or device (scsiDscTgtIndex). The
|
||
|
|
|
||
|
|
authorization is either for all local ports if
|
||
|
|
scsiDscTgtIntrPortIndex is zero, or otherwise only for the
|
||
|
|
specific port identified by scsiDscTgtIntrPortIndex.
|
||
|
|
Note that when an entry in this table is deleted, then any
|
||
|
|
corresponding entries in the scsiDscLunsTable should be
|
||
|
|
deleted as well."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
|
||
|
|
scsiDscTgtIndex }
|
||
|
|
::= { scsiDscTgtTable 1 }
|
||
|
|
|
||
|
|
ScsiDscTgtEntry ::= SEQUENCE {
|
||
|
|
scsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero,
|
||
|
|
scsiDscTgtIndex ScsiIndexValue,
|
||
|
|
scsiDscTgtDevOrPort ScsiDeviceOrPort,
|
||
|
|
scsiDscTgtName ScsiName,
|
||
|
|
scsiDscTgtConfigured TruthValue,
|
||
|
|
scsiDscTgtDiscovered TruthValue,
|
||
|
|
scsiDscTgtInCommands Counter32,
|
||
|
|
scsiDscTgtWrittenMegaBytes Counter32,
|
||
|
|
scsiDscTgtReadMegaBytes Counter32,
|
||
|
|
scsiDscTgtHSInCommands Counter64,
|
||
|
|
scsiDscTgtLastCreation TimeStamp,
|
||
|
|
scsiDscTgtRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiDscTgtIntrPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiPortIndexValueOrZero
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object relates to a particular local device within a
|
||
|
|
particular SCSI instance and specifies:
|
||
|
|
- the index of the local scsi initiator port,
|
||
|
|
- or zero, if this entry refers to the local device and
|
||
|
|
therefore refers to all the local initiator ports."
|
||
|
|
::= { scsiDscTgtEntry 1 }
|
||
|
|
|
||
|
|
scsiDscTgtIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is an arbitrary integer used to uniquely
|
||
|
|
identify a particular authorized target amongst those
|
||
|
|
authorized for one or more ports (of a particular device
|
||
|
|
within a particular SCSI instance) to attach to."
|
||
|
|
::= { scsiDscTgtEntry 2 }
|
||
|
|
|
||
|
|
scsiDscTgtDevOrPort OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDeviceOrPort
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the authorization represented
|
||
|
|
by this row applies to a remote target port or remote target
|
||
|
|
device."
|
||
|
|
::= { scsiDscTgtEntry 3 }
|
||
|
|
|
||
|
|
scsiDscTgtName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the name of this
|
||
|
|
authorized/discovered target device or port."
|
||
|
|
::= { scsiDscTgtEntry 4 }
|
||
|
|
|
||
|
|
scsiDscTgtConfigured OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object means:
|
||
|
|
-true(1): this entry has been configured by an administrator
|
||
|
|
-false(2): this entry has been added from other source.
|
||
|
|
An administrator can modify this value from false to true."
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { scsiDscTgtEntry 5 }
|
||
|
|
|
||
|
|
scsiDscTgtDiscovered OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object means:
|
||
|
|
-true(1): this entry has been discovered by the SCSI instance.
|
||
|
|
-false(2): this entry has been added from other source.
|
||
|
|
This entry is read-only because an administrator cannot
|
||
|
|
change it.
|
||
|
|
Note that it is an implementation decision to determine how
|
||
|
|
long to retain a row with configured=false, as and when the
|
||
|
|
target is no longer visible/accessible to the local
|
||
|
|
initiator."
|
||
|
|
::= { scsiDscTgtEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
scsiDscTgtInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of commands received by
|
||
|
|
this target port or device."
|
||
|
|
|
||
|
|
::= { scsiDscTgtEntry 7 }
|
||
|
|
|
||
|
|
scsiDscTgtWrittenMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the amount of data in Megabytes
|
||
|
|
written by this target port or device."
|
||
|
|
::= { scsiDscTgtEntry 8 }
|
||
|
|
|
||
|
|
scsiDscTgtReadMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the amount of data in Megabytes read
|
||
|
|
by this target port or device."
|
||
|
|
::= { scsiDscTgtEntry 9 }
|
||
|
|
|
||
|
|
scsiDscTgtHSInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of commands received by
|
||
|
|
this target port or device. This object provides support for
|
||
|
|
systems which can quickly generate lots of commands because
|
||
|
|
they run at high speed."
|
||
|
|
::= { scsiDscTgtEntry 10 }
|
||
|
|
|
||
|
|
scsiDscTgtLastCreation OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the value of sysUpTime when this row
|
||
|
|
was created."
|
||
|
|
::= { scsiDscTgtEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiDscTgtRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object allows to configure dynamically a new entry in
|
||
|
|
this table via SNMP or eventually delete it.
|
||
|
|
|
||
|
|
An administrator is not allowed to delete an entry for which
|
||
|
|
the value of the object scsiIntrDscTgtDiscovered is equal to
|
||
|
|
true.
|
||
|
|
Note that when an entry in this table is deleted, then any
|
||
|
|
corresponding entries in the scsiDscLunsTable must also be
|
||
|
|
automatically deleted. "
|
||
|
|
::= { scsiDscTgtEntry 12 }
|
||
|
|
|
||
|
|
scsiDscLunTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiDscLunEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the remote (not in the local system)
|
||
|
|
logical unit numbers (LUNS) discovered via each local
|
||
|
|
initiator port of each local device within a particular SCSI
|
||
|
|
instance."
|
||
|
|
::= { scsiRemoteTarget 2 }
|
||
|
|
|
||
|
|
scsiDscLunEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDscLunEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents a discovered LUN at a particular
|
||
|
|
SCSI target device (scsiDscTgtIndex), where the LUN was
|
||
|
|
discovered by a particular local initiator device within a
|
||
|
|
particular SCSI instance, possibly via a particular local
|
||
|
|
initiator port.
|
||
|
|
Note that when an entry in the scsiDscTgtTable is deleted,
|
||
|
|
then any corresponding entries in this table is automatically
|
||
|
|
deleted."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
|
||
|
|
scsiDscTgtIndex, scsiDscLunIndex }
|
||
|
|
::= { scsiDscLunTable 1 }
|
||
|
|
|
||
|
|
ScsiDscLunEntry ::= SEQUENCE {
|
||
|
|
scsiDscLunIndex ScsiIndexValue,
|
||
|
|
scsiDscLunLun ScsiLUNOrZero
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiDscLunIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is an arbitrary integer used to uniquely
|
||
|
|
identify a particular LUN discovered by a particular scsi
|
||
|
|
initiator port or a particular SCSI initiator device within a
|
||
|
|
particular SCSI instance. Entries in the scsiDscLunIdTable
|
||
|
|
|
||
|
|
are associated with a LUN by having the value of this object
|
||
|
|
in their INDEX."
|
||
|
|
::= { scsiDscLunEntry 1 }
|
||
|
|
|
||
|
|
scsiDscLunLun OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLUNOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the Logical Unit Number (LUN) of the
|
||
|
|
discovered logical unit.
|
||
|
|
A value of zero has no meaning in this case."
|
||
|
|
::= { scsiDscLunEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
----------------------- LU Identifiers discovered ------------------
|
||
|
|
scsiDscLunIdTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiDscLunIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the known LU Identifiers of the
|
||
|
|
remote (not in the local system) logical units discovered via
|
||
|
|
each local initiator port or device of this SCSI instance."
|
||
|
|
::= { scsiRemoteTarget 3 }
|
||
|
|
|
||
|
|
scsiDscLunIdEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDscLunIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents the LU Identifier of a discovered
|
||
|
|
LUN at a particular SCSI target device (scsiDscTgtIndex),
|
||
|
|
where the LUN was discovered by a particular local initiator
|
||
|
|
device within a particular SCSI instance, possibly via a
|
||
|
|
particular local initiator port."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
|
||
|
|
scsiDscTgtIndex, scsiDscLunIndex, scsiDscLunIdIndex }
|
||
|
|
::= { scsiDscLunIdTable 1 }
|
||
|
|
|
||
|
|
ScsiDscLunIdEntry ::= SEQUENCE {
|
||
|
|
scsiDscLunIdIndex ScsiIndexValue,
|
||
|
|
scsiDscLunIdCodeSet ScsiIdCodeSet,
|
||
|
|
scsiDscLunIdAssociation ScsiIdAssociation,
|
||
|
|
scsiDscLunIdType ScsiIdType,
|
||
|
|
scsiDscLunIdValue ScsiIdValue
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiDscLunIdIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is an arbitrary integer used to uniquely
|
||
|
|
identify a particular LUN Identifier discovered by each scsi
|
||
|
|
initiator device or particular SCSI initiator port within a
|
||
|
|
particular SCSI instance."
|
||
|
|
::= { scsiDscLunIdEntry 1 }
|
||
|
|
|
||
|
|
scsiDscLunIdCodeSet OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdCodeSet
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the code set in use with this
|
||
|
|
identifier.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2),Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiDscLunIdEntry 2 }
|
||
|
|
|
||
|
|
scsiDscLunIdAssociation OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdAssociation
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies what the identifier is associated with
|
||
|
|
(e.g, with the addressed physical/logical device or with a
|
||
|
|
particular port). The value is represented in the same
|
||
|
|
format as is contained in the identifier's Identification
|
||
|
|
Descriptor within the Logical Unit's Device Identification
|
||
|
|
Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiDscLunIdEntry 3 }
|
||
|
|
|
||
|
|
scsiDscLunIdType OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of the identifier.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
|
||
|
|
::= { scsiDscLunIdEntry 4 }
|
||
|
|
|
||
|
|
scsiDscLunIdValue OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the actual value of this identifier.
|
||
|
|
The format is defined by the objects scsiDscLunIdCodeSet,
|
||
|
|
scsiDscLunIdAssociation, scsiDscLunIdType.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2),
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiDscLunIdEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiAttTgtPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiAttTgtPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the remote (not in the local system)
|
||
|
|
target ports that are currently attached to each local
|
||
|
|
initiator port of this SCSI instance."
|
||
|
|
::= { scsiRemoteTarget 6 }
|
||
|
|
|
||
|
|
scsiAttTgtPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiAttTgtPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents a remote target port
|
||
|
|
(scsiAttTgtPortIndex) currently attached to a particular
|
||
|
|
initiator port (scsiPortIndex) of a particular SCSI initiator
|
||
|
|
device within a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
|
||
|
|
scsiAttTgtPortIndex }
|
||
|
|
::= { scsiAttTgtPortTable 1 }
|
||
|
|
|
||
|
|
ScsiAttTgtPortEntry ::= SEQUENCE {
|
||
|
|
scsiAttTgtPortIndex ScsiIndexValue,
|
||
|
|
scsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero,
|
||
|
|
scsiAttTgtPortName ScsiName,
|
||
|
|
scsiAttTgtPortIdentifier ScsiIdentifier
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiAttTgtPortIndex OBJECT-TYPE
|
||
|
|
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An arbitrary integer used to uniquely identify a particular
|
||
|
|
target currently attached to a particular SCSI initiator port
|
||
|
|
of a particular SCSI initiator device within a particular
|
||
|
|
SCSI instance."
|
||
|
|
::= { scsiAttTgtPortEntry 1 }
|
||
|
|
|
||
|
|
scsiAttTgtPortDscTgtIdx OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValueOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the value of the scsiAttTgtPortIndex
|
||
|
|
index variable for the row in the scsiDscTgtTable
|
||
|
|
representing this currently attached target port. If the
|
||
|
|
currently attached target port is not represented in the
|
||
|
|
scsiDscTgtTable, then the value of this object is zero."
|
||
|
|
::= { scsiAttTgtPortEntry 2 }
|
||
|
|
|
||
|
|
scsiAttTgtPortName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object contains the name of the attached target port."
|
||
|
|
::= { scsiAttTgtPortEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiAttTgtPortIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdentifier
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object contains the identifier of the attached target
|
||
|
|
port."
|
||
|
|
::= { scsiAttTgtPortEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- Management Objects regarding target type of scsi devices
|
||
|
|
--
|
||
|
|
scsiTgtDevTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiTgtDevEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains information about each local target
|
||
|
|
device."
|
||
|
|
::= { scsiTarget 1 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiTgtDevEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiTgtDevEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing information applicable to a
|
||
|
|
particular local target device within a particular SCSI
|
||
|
|
instance. "
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex }
|
||
|
|
::= { scsiTgtDevTable 1 }
|
||
|
|
|
||
|
|
ScsiTgtDevEntry ::= SEQUENCE {
|
||
|
|
scsiTgtDevNumberOfLUs Gauge32,
|
||
|
|
scsiTgtDeviceStatus INTEGER,
|
||
|
|
scsiTgtDevNonAccessibleLUs Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiTgtDevNumberOfLUs OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of Logical Units accessible via
|
||
|
|
this local target device."
|
||
|
|
::= { scsiTgtDevEntry 1 }
|
||
|
|
|
||
|
|
scsiTgtDeviceStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
available(2),
|
||
|
|
broken(3),
|
||
|
|
readying(4),
|
||
|
|
abnormal(5),
|
||
|
|
nonAddrFailure(6),
|
||
|
|
nonAddrFailReadying(7),
|
||
|
|
nonAddrFailAbnormal(8)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the status of this SCSI device,
|
||
|
|
summarizing the state of both the addressable devices (i.e.,
|
||
|
|
the logical units) and the non-addressable devices within
|
||
|
|
this SCSI device:
|
||
|
|
- unknown(1): This value is used when the status cannot be
|
||
|
|
determined
|
||
|
|
- available(2): All addressable and non-addressable devices
|
||
|
|
within the SCSI device are fully operational (i.e., no
|
||
|
|
logical units have an abnormal status).
|
||
|
|
- broken(3): The SCSI device is not operational and cannot be
|
||
|
|
made operational without external intervention.
|
||
|
|
- readying(4): One or more logical units within the SCSI
|
||
|
|
device are being initialized and access to the SCSI device is
|
||
|
|
|
||
|
|
temporarily limited (i.e., one or more of the logical unit
|
||
|
|
have a readying status).
|
||
|
|
- abnormal(5): One or more addressable devices within the
|
||
|
|
SCSI device are indicating a status other than available;
|
||
|
|
nevertheless, the SCSI device is operational (i.e., one or
|
||
|
|
more of the logical units have an abnormal status).
|
||
|
|
- nonAddrFailure(6): One or more non-addressable devices
|
||
|
|
within the SCSI device have failed; nevertheless, the SCSI
|
||
|
|
device is operational (i.e., no logical units have an
|
||
|
|
abnormal or readying status).
|
||
|
|
- nonAddrFailReadying(7): One or more non-addressable devices
|
||
|
|
within the SCSI device have failed; nevertheless,one or more
|
||
|
|
logical units within the SCSI device are being initialized
|
||
|
|
and access to the SCSI device is temporarily limited.
|
||
|
|
- nonAddrFailAbnormal(8): One or more non-addressable devices
|
||
|
|
within the SCSI device have failed and one or more
|
||
|
|
addressable devices within the SCSI device are indicating a
|
||
|
|
status other than available however the SCSI device is
|
||
|
|
operational.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998
|
||
|
|
6.3.1.8 REPORT STATES service action"
|
||
|
|
::= { scsiTgtDevEntry 2}
|
||
|
|
|
||
|
|
|
||
|
|
scsiTgtDevNonAccessibleLUs OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of Logical Units existing but not
|
||
|
|
currently accessible via this local target device."
|
||
|
|
::= { scsiTgtDevEntry 3 }
|
||
|
|
|
||
|
|
-- Target Port Table
|
||
|
|
scsiTgtPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiTgtPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the local target ports of all the
|
||
|
|
local target devices."
|
||
|
|
::= { scsiTarget 2 }
|
||
|
|
|
||
|
|
scsiTgtPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiTgtPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing information applicable to a
|
||
|
|
particular local target port of a particular local target
|
||
|
|
device within a particular SCSI instance. "
|
||
|
|
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex}
|
||
|
|
::= { scsiTgtPortTable 1 }
|
||
|
|
|
||
|
|
ScsiTgtPortEntry ::= SEQUENCE {
|
||
|
|
scsiTgtPortName ScsiName,
|
||
|
|
scsiTgtPortIdentifier ScsiIdentifier,
|
||
|
|
scsiTgtPortInCommands Counter32,
|
||
|
|
scsiTgtPortWrittenMegaBytes Counter32,
|
||
|
|
scsiTgtPortReadMegaBytes Counter32,
|
||
|
|
scsiTgtPortHSInCommands Counter64
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiTgtPortName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the name of the port assigned for
|
||
|
|
use in the SCSI protocol."
|
||
|
|
::= { scsiTgtPortEntry 1 }
|
||
|
|
|
||
|
|
scsiTgtPortIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdentifier
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the identifier of the port in one of
|
||
|
|
the format(s) appropriate for the type of transport."
|
||
|
|
::= { scsiTgtPortEntry 2 }
|
||
|
|
|
||
|
|
scsiTgtPortInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of commands received by
|
||
|
|
this target port."
|
||
|
|
::= { scsiTgtPortEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiTgtPortWrittenMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the amount of data written in
|
||
|
|
Megabytes by this target port."
|
||
|
|
::= { scsiTgtPortEntry 4 }
|
||
|
|
|
||
|
|
scsiTgtPortReadMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the amount of data read in Megabytes
|
||
|
|
by this target port."
|
||
|
|
::= { scsiTgtPortEntry 5 }
|
||
|
|
|
||
|
|
scsiTgtPortHSInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of commands received.
|
||
|
|
This object provides support for systems that can quickly
|
||
|
|
generate lots of commands because they run at high speed."
|
||
|
|
::= { scsiTgtPortEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiRemoteInitiators OBJECT IDENTIFIER ::= { scsiTarget 3 }
|
||
|
|
|
||
|
|
-- The scsiAuthorizedIntrTable contains the list of remote initiator
|
||
|
|
-- ports that are authorized to be attached specific target ports
|
||
|
|
-- and on which, an administrator would like to keep permanent
|
||
|
|
-- information and long term statistics even when not currently
|
||
|
|
-- attached.
|
||
|
|
|
||
|
|
scsiAuthorizedIntrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiAuthorizedIntrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the authorized initiator devices or
|
||
|
|
ports that may attach a target device or port of the local
|
||
|
|
SCSI instance. Statistics are kept for each such
|
||
|
|
authorization; thus, the authorizations should be configured
|
||
|
|
in the manner, which will cause the desired set of statistics
|
||
|
|
to be collected and that will determine the correct LUN map."
|
||
|
|
::= { scsiRemoteInitiators 1 }
|
||
|
|
|
||
|
|
scsiAuthorizedIntrEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiAuthorizedIntrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents a remote initiator port or remote
|
||
|
|
initiator device that may attach to the local target port or
|
||
|
|
device within a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiAuthIntrTgtPortIndex,
|
||
|
|
scsiAuthIntrIndex }
|
||
|
|
::= { scsiAuthorizedIntrTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
ScsiAuthorizedIntrEntry ::= SEQUENCE {
|
||
|
|
scsiAuthIntrTgtPortIndex ScsiPortIndexValueOrZero,
|
||
|
|
scsiAuthIntrIndex ScsiIndexValue,
|
||
|
|
scsiAuthIntrDevOrPort ScsiDeviceOrPort,
|
||
|
|
scsiAuthIntrName ScsiName,
|
||
|
|
scsiAuthIntrLunMapIndex ScsiIndexValueOrZero,
|
||
|
|
scsiAuthIntrAttachedTimes Counter32,
|
||
|
|
scsiAuthIntrOutCommands Counter32,
|
||
|
|
scsiAuthIntrReadMegaBytes Counter32,
|
||
|
|
scsiAuthIntrWrittenMegaBytes Counter32,
|
||
|
|
scsiAuthIntrHSOutCommands Counter64,
|
||
|
|
scsiAuthIntrLastCreation TimeStamp,
|
||
|
|
scsiAuthIntrRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiAuthIntrTgtPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiPortIndexValueOrZero
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains either the index of the port, or zero
|
||
|
|
to indicate any port, on the particular local target device."
|
||
|
|
::= { scsiAuthorizedIntrEntry 1 }
|
||
|
|
|
||
|
|
scsiAuthIntrIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is an arbitrary integer used to uniquely
|
||
|
|
identify a SCSI initiator which is authorized to attach to a
|
||
|
|
particular local target device or port of a particular SCSI
|
||
|
|
instance."
|
||
|
|
::= { scsiAuthorizedIntrEntry 2 }
|
||
|
|
|
||
|
|
scsiAuthIntrDevOrPort OBJECT-TYPE
|
||
|
|
SYNTAX ScsiDeviceOrPort
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies if this entry refers to a remote
|
||
|
|
initiator port or a device.
|
||
|
|
A value of device(1) means that the authorized remote
|
||
|
|
initiator is a device and includes all its ports.
|
||
|
|
A value of port(2) means that the authorized remote initiator
|
||
|
|
is a port."
|
||
|
|
::= { scsiAuthorizedIntrEntry 3 }
|
||
|
|
|
||
|
|
scsiAuthIntrName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the name of the remote initiator
|
||
|
|
device or port authorized by this row."
|
||
|
|
::= { scsiAuthorizedIntrEntry 4 }
|
||
|
|
|
||
|
|
scsiAuthIntrLunMapIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValueOrZero
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the set of entries in the
|
||
|
|
scsiLunMapTable for which scsiLunMapIndex has the same value
|
||
|
|
as the value of this object. The identified set of entries
|
||
|
|
constitute the LUN map to be used for accessing logical units
|
||
|
|
when the remote initiator port or device corresponding to
|
||
|
|
this entry is attached to any local target port or device
|
||
|
|
corresponding to this entry.
|
||
|
|
Note that this object has a value of zero if this entry
|
||
|
|
should use the default LUN map."
|
||
|
|
::= { scsiAuthorizedIntrEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiAuthIntrAttachedTimes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Times"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the number of times that this remote
|
||
|
|
initiator has transitioned from unattached to attached to
|
||
|
|
this local target device or port."
|
||
|
|
::= { scsiAuthorizedIntrEntry 6 }
|
||
|
|
|
||
|
|
scsiAuthIntrOutCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the number of commands that the remote
|
||
|
|
initiator corresponding to this entry has sent to the local
|
||
|
|
target device or port corresponding to this entry."
|
||
|
|
::= { scsiAuthorizedIntrEntry 7 }
|
||
|
|
|
||
|
|
scsiAuthIntrReadMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the amount of data in Megabytes that
|
||
|
|
the remote initiator corresponding to this entry has read
|
||
|
|
|
||
|
|
from the local target device or port corresponding to this
|
||
|
|
entry."
|
||
|
|
::= { scsiAuthorizedIntrEntry 8 }
|
||
|
|
|
||
|
|
scsiAuthIntrWrittenMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the amount of data in Megabytes that
|
||
|
|
the remote initiator corresponding to this entry has written
|
||
|
|
from the local target device or port corresponding to this
|
||
|
|
entry."
|
||
|
|
::= { scsiAuthorizedIntrEntry 9}
|
||
|
|
|
||
|
|
|
||
|
|
scsiAuthIntrHSOutCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents the number of commands sent by the
|
||
|
|
remote initiator corresponding to this entry to the local
|
||
|
|
target device or port corresponding to this entry. This
|
||
|
|
object provides support for systems which can quickly
|
||
|
|
generate lots of commands because they run at high speed."
|
||
|
|
::= { scsiAuthorizedIntrEntry 10 }
|
||
|
|
|
||
|
|
scsiAuthIntrLastCreation OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the value of sysUpTime when this row
|
||
|
|
was last created."
|
||
|
|
::= { scsiAuthorizedIntrEntry 11 }
|
||
|
|
|
||
|
|
scsiAuthIntrRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object allows an administrator to create or delete this
|
||
|
|
entry."
|
||
|
|
::= { scsiAuthorizedIntrEntry 12 }
|
||
|
|
|
||
|
|
scsiAttIntrPrtTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiAttIntrPrtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes all the remote initiator ports that are
|
||
|
|
currently attached to a local target port of all local
|
||
|
|
devices within all SCSI instances."
|
||
|
|
::= { scsiRemoteInitiators 2 }
|
||
|
|
|
||
|
|
scsiAttIntrPrtEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiAttIntrPrtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) represents a remote initiator currently
|
||
|
|
attached to a particular local target port of a particular
|
||
|
|
target device of a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
|
||
|
|
scsiAttIntrPrtIdx }
|
||
|
|
::= { scsiAttIntrPrtTable 1 }
|
||
|
|
|
||
|
|
ScsiAttIntrPrtEntry ::= SEQUENCE {
|
||
|
|
scsiAttIntrPrtIdx ScsiIndexValue,
|
||
|
|
scsiAttIntrPrtAuthIntrIdx ScsiIndexValueOrZero,
|
||
|
|
scsiAttIntrPrtName ScsiName,
|
||
|
|
scsiAttIntrPrtId ScsiIdentifier
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiAttIntrPrtIdx OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents an arbitrary integer used to
|
||
|
|
uniquely identify a particular attached remote initiator port
|
||
|
|
to a particular target port within a particular SCSI target
|
||
|
|
device within a particular SCSI instance."
|
||
|
|
::= { scsiAttIntrPrtEntry 1 }
|
||
|
|
|
||
|
|
scsiAttIntrPrtAuthIntrIdx OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValueOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the corresponding index in the
|
||
|
|
scsiAuthorizedIntrTable for this current attached remote
|
||
|
|
initiator or zero if this remote attached initiator is not
|
||
|
|
configured in that table."
|
||
|
|
::= { scsiAttIntrPrtEntry 2 }
|
||
|
|
|
||
|
|
scsiAttIntrPrtName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
" This object represents the name of the remote initiator
|
||
|
|
attached to this local target port."
|
||
|
|
::= { scsiAttIntrPrtEntry 3 }
|
||
|
|
|
||
|
|
scsiAttIntrPrtId OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdentifier
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the identifier of the remote
|
||
|
|
initiator attached to this local target port."
|
||
|
|
::= { scsiAttIntrPrtEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
------------------- Managed Objects regarding logical units --------
|
||
|
|
scsiLuTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiLuEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This table contains all the logical units exposed by local
|
||
|
|
target devices."
|
||
|
|
::= { scsiLogicalUnit 1 }
|
||
|
|
|
||
|
|
scsiLuEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLuEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) contains information applicable to a
|
||
|
|
particular logical unit of a particular local target device
|
||
|
|
within a particular SCSI instance. "
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiLuIndex}
|
||
|
|
::= { scsiLuTable 1 }
|
||
|
|
|
||
|
|
ScsiLuEntry ::= SEQUENCE {
|
||
|
|
scsiLuIndex ScsiIndexValue,
|
||
|
|
scsiLuDefaultLun ScsiLUNOrZero,
|
||
|
|
scsiLuWwnName ScsiNameIdOrZero,
|
||
|
|
scsiLuVendorId SnmpAdminString,
|
||
|
|
scsiLuProductId SnmpAdminString,
|
||
|
|
scsiLuRevisionId SnmpAdminString,
|
||
|
|
scsiLuPeripheralType Unsigned32,
|
||
|
|
scsiLuStatus INTEGER,
|
||
|
|
scsiLuState BITS,
|
||
|
|
scsiLuInCommands Counter32,
|
||
|
|
scsiLuReadMegaBytes Counter32,
|
||
|
|
scsiLuWrittenMegaBytes Counter32,
|
||
|
|
scsiLuInResets Counter32,
|
||
|
|
scsiLuOutQueueFullStatus Counter32,
|
||
|
|
scsiLuHSInCommands Counter64
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
scsiLuIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents an arbitrary integer used to
|
||
|
|
uniquely identify a particular logical unit within a
|
||
|
|
particular SCSI target device within a particular SCSI
|
||
|
|
instance."
|
||
|
|
::= { scsiLuEntry 1 }
|
||
|
|
|
||
|
|
scsiLuDefaultLun OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLUNOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the default Logical Unit Number
|
||
|
|
(LUN) for this logical unit; it is the LUN that will appear
|
||
|
|
to an initiator that was not configured to see another LUN.
|
||
|
|
Note that this object will have a zero-length string if this
|
||
|
|
Logical Unit does not have a default LUN."
|
||
|
|
::= { scsiLuEntry 2 }
|
||
|
|
|
||
|
|
scsiLuWwnName OBJECT-TYPE
|
||
|
|
SYNTAX ScsiNameIdOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the World-Wide Name of this LU.
|
||
|
|
A value of zero has no meaning in this case."
|
||
|
|
::= { scsiLuEntry 3 }
|
||
|
|
|
||
|
|
scsiLuVendorId OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString(SIZE(0..79))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents a string identifying the vendor of
|
||
|
|
this LU according to the value in SCSI device page."
|
||
|
|
::= { scsiLuEntry 4 }
|
||
|
|
|
||
|
|
scsiLuProductId OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString(SIZE(0..79))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents a string identifying the product for
|
||
|
|
this LU according to the value in SCSI device page."
|
||
|
|
::= { scsiLuEntry 5 }
|
||
|
|
|
||
|
|
scsiLuRevisionId OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString(SIZE(0..79))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object represents a string defining the product
|
||
|
|
revision of this LU according to the value in SCSI device
|
||
|
|
page."
|
||
|
|
::= { scsiLuEntry 6 }
|
||
|
|
|
||
|
|
scsiLuPeripheralType OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the value returned to SCSI query VPD page 83.
|
||
|
|
It can be: direct-access device, sequential-access device,
|
||
|
|
printer, communication device and so on.
|
||
|
|
The values that can be returned here are defined in SCSI
|
||
|
|
Primary Commands -2."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), T10 Project 1236-
|
||
|
|
D, Revision 20, 18 July 2001 [16]"
|
||
|
|
::= { scsiLuEntry 7 }
|
||
|
|
|
||
|
|
scsiLuStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
available(2),
|
||
|
|
notAvailable(3),
|
||
|
|
broken(4),
|
||
|
|
readying(5),
|
||
|
|
abnormal(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the status of this logical unit:
|
||
|
|
- unknown(1): The status of this logical unit cannot be
|
||
|
|
determined.
|
||
|
|
- available(2): The logical unit is fully operational (i.e.,
|
||
|
|
accepts media access SCSI commands and has no state
|
||
|
|
information to report).
|
||
|
|
- notAvailable(3): The logical unit is capable of being
|
||
|
|
supported but not available (i.e., no logical unit is
|
||
|
|
currently present or the logical unit is present but not
|
||
|
|
configured for use).
|
||
|
|
- broken(4): The logical unit has failed and cannot respond
|
||
|
|
to SCSI commands.
|
||
|
|
- readying(5): The logical unit is being initialized and
|
||
|
|
access is temporarily limited.
|
||
|
|
- abnormal(6): The logical unit has state information
|
||
|
|
available that indicates it is operating with limits. The
|
||
|
|
scsiLuState indicates what those limits are.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
|
||
|
|
" SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998
|
||
|
|
6.3.1.8 REPORT STATES service action"
|
||
|
|
::= { scsiLuEntry 8 }
|
||
|
|
|
||
|
|
scsiLuState OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
dataLost(0),
|
||
|
|
dynamicReconfigurationInProgress(1),
|
||
|
|
exposed(2),
|
||
|
|
fractionallyExposed(3),
|
||
|
|
partiallyExposed(4),
|
||
|
|
protectedRebuild(5),
|
||
|
|
protectionDisabled(6),
|
||
|
|
rebuild(7),
|
||
|
|
recalculate(8),
|
||
|
|
spareInUse(9),
|
||
|
|
verifyInProgress(10)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the state of a logical unit and its
|
||
|
|
meaning is according the bit position:
|
||
|
|
0 Data lost: Within the logical unit data has been lost.
|
||
|
|
1 Dynamic reconfiguration in progress: The logical unit is
|
||
|
|
being reconfigured. In this state all data is still
|
||
|
|
protected.
|
||
|
|
2 Exposed: Within the logical unit data is not protected.
|
||
|
|
In this state all data is still valid, however, loss of
|
||
|
|
data/data-availability is unavoidable in the event of a
|
||
|
|
failure.
|
||
|
|
3 Fractionally exposed: Within the logical unit part of
|
||
|
|
the data is not protected. In this state all data is
|
||
|
|
still valid, however, a failure may cause a loss of data
|
||
|
|
or a loss of data availability.
|
||
|
|
4 Partially exposed: Within the logical unit one or more
|
||
|
|
underlying storage devices have failed. In this state
|
||
|
|
all data is still protected.
|
||
|
|
5 Protected rebuild: The logical unit is in the process of
|
||
|
|
a rebuild operation. In this state all data is
|
||
|
|
protected.
|
||
|
|
6 Protection disabled: Within the logical unit the data
|
||
|
|
protection method has been disabled.
|
||
|
|
In this state all data is still valid, however, however,
|
||
|
|
loss of data/data-availability is unavoidable in the
|
||
|
|
event of a failure.
|
||
|
|
7 Rebuild: The data protection method is in the process of
|
||
|
|
rebuilding data. In this state data is not protected.
|
||
|
|
8 Recalculate: The logical unit is in the process of a
|
||
|
|
recalculate operation.
|
||
|
|
9 Spare in use: Within the logical unit a storage device
|
||
|
|
in full or part being used to store data. In this state
|
||
|
|
all data is still protected.
|
||
|
|
|
||
|
|
10 Verify in progress: Within the logical unit data is
|
||
|
|
being verified."
|
||
|
|
REFERENCE
|
||
|
|
" SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998
|
||
|
|
6.3.1.8 REPORT STATES service action"
|
||
|
|
::= { scsiLuEntry 9 }
|
||
|
|
|
||
|
|
scsiLuInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of commands received by
|
||
|
|
this logical unit."
|
||
|
|
::= { scsiLuEntry 10 }
|
||
|
|
|
||
|
|
scsiLuReadMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the amount of data in Megabytes read
|
||
|
|
from this logical unit."
|
||
|
|
::= { scsiLuEntry 11 }
|
||
|
|
|
||
|
|
scsiLuWrittenMegaBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Megabytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the amount of data in Megabytes
|
||
|
|
written by this logical unit."
|
||
|
|
::= { scsiLuEntry 12 }
|
||
|
|
|
||
|
|
scsiLuInResets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "resets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of resets received by
|
||
|
|
this logical unit."
|
||
|
|
::= { scsiLuEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiLuOutQueueFullStatus OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
" This object represents the number of queue full statuses
|
||
|
|
received by this logical unit."
|
||
|
|
::= { scsiLuEntry 14 }
|
||
|
|
|
||
|
|
scsiLuHSInCommands OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "commands"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the number of commands received by
|
||
|
|
this logical unit. This object provides support for systems
|
||
|
|
that can quickly generate lots of commands because they run
|
||
|
|
at high speed."
|
||
|
|
::= { scsiLuEntry 15 }
|
||
|
|
|
||
|
|
----------------------- Logical Unit Identifier Table --------------
|
||
|
|
|
||
|
|
scsiLuIdTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiLuIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table of identifiers for all logical units exposed by
|
||
|
|
local targets device."
|
||
|
|
::= { scsiLogicalUnit 2 }
|
||
|
|
|
||
|
|
scsiLuIdEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLuIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (row) containing information applicable to a
|
||
|
|
particular identifier for a particular logical unit of a
|
||
|
|
particular target device within a particular SCSI instance. "
|
||
|
|
INDEX {scsiInstIndex, scsiDeviceIndex, scsiLuIndex, scsiLuIdIndex}
|
||
|
|
::= { scsiLuIdTable 1 }
|
||
|
|
|
||
|
|
ScsiLuIdEntry ::= SEQUENCE {
|
||
|
|
scsiLuIdIndex ScsiIndexValue,
|
||
|
|
scsiLuIdCodeSet ScsiIdCodeSet,
|
||
|
|
scsiLuIdAssociation ScsiIdAssociation,
|
||
|
|
scsiLuIdType ScsiIdType,
|
||
|
|
scsiLuIdValue ScsiIdValue
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiLuIdIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents an arbitrary integer used to
|
||
|
|
uniquely identify a particular LU Identifier within a
|
||
|
|
|
||
|
|
particular logical unit within a particular SCSI target
|
||
|
|
device within a particular SCSI instance."
|
||
|
|
::= { scsiLuIdEntry 1 }
|
||
|
|
|
||
|
|
scsiLuIdCodeSet OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdCodeSet
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the code set in use with this
|
||
|
|
identifier.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 ((SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiLuIdEntry 2 }
|
||
|
|
|
||
|
|
scsiLuIdAssociation OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdAssociation
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies what the identifier is associated with
|
||
|
|
(e.g, with the addressed physical/logical device or with a
|
||
|
|
particular port). The value is represented in the same
|
||
|
|
format as is contained in the identifier's Identification
|
||
|
|
Descriptor within the Logical Unit's Device Identification
|
||
|
|
Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiLuIdEntry 3 }
|
||
|
|
|
||
|
|
scsiLuIdType OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIdType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of the identifier.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20,
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiLuIdEntry 4 }
|
||
|
|
|
||
|
|
scsiLuIdValue OBJECT-TYPE
|
||
|
|
|
||
|
|
SYNTAX ScsiIdValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents the actual value of this identifier.
|
||
|
|
The format is defined by the objects scsiLuIdCodeSet,
|
||
|
|
scsiLuIdAssociation, scsiLuIdType.
|
||
|
|
The value is represented in the same format as is contained
|
||
|
|
in the identifier's Identification Descriptor within the
|
||
|
|
Logical Unit's Device Identification Page."
|
||
|
|
REFERENCE
|
||
|
|
" ANSI - SCSI Primary Commands - 2 (SPC-2),
|
||
|
|
Chapter 8: section 8.4.4, page 210 Vital Product Data
|
||
|
|
Parameters [16]"
|
||
|
|
::= { scsiLuIdEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
----------------------- The LUN Map Table --------------------------
|
||
|
|
|
||
|
|
scsiLunMapTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ScsiLunMapEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes LUNs additional to the default one. A
|
||
|
|
logical unit may have a different Logical Unit Number for
|
||
|
|
different initiators. This table provides a mapping between a
|
||
|
|
logical unit and a logical unit number."
|
||
|
|
::= { scsiLogicalUnit 3 }
|
||
|
|
|
||
|
|
scsiLunMapEntry OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLunMapEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing information about the mapping of a
|
||
|
|
particular Logical Unit to a particular LUN. The set of
|
||
|
|
entries which all have the same values of scsiInstIndex,
|
||
|
|
scsiDeviceIndex and scsiLunMapIndex constitute a LUN Map within
|
||
|
|
a particular SCSI instance."
|
||
|
|
INDEX { scsiInstIndex, scsiDeviceIndex, scsiLunMapIndex,
|
||
|
|
scsiLunMapLun}
|
||
|
|
::= { scsiLunMapTable 1 }
|
||
|
|
|
||
|
|
ScsiLunMapEntry ::= SEQUENCE {
|
||
|
|
scsiLunMapIndex ScsiIndexValue,
|
||
|
|
scsiLunMapLun ScsiLUNOrZero,
|
||
|
|
scsiLunMapLuIndex ScsiIndexValue,
|
||
|
|
scsiLunMapRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
scsiLunMapIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" This object represents an arbitrary integer used to
|
||
|
|
uniquely identify a particular LunMap within a particular
|
||
|
|
SCSI target device within a particular SCSI instance."
|
||
|
|
::= { scsiLunMapEntry 1 }
|
||
|
|
|
||
|
|
scsiLunMapLun OBJECT-TYPE
|
||
|
|
SYNTAX ScsiLUNOrZero
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the Logical Unit Number, to which a
|
||
|
|
logical unit is mapped by this row.
|
||
|
|
A value of zero has no meaning in this case."
|
||
|
|
::= { scsiLunMapEntry 2 }
|
||
|
|
|
||
|
|
scsiLunMapLuIndex OBJECT-TYPE
|
||
|
|
SYNTAX ScsiIndexValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the logical unit for which the value
|
||
|
|
of scsiLuIndex is the same as the value of this object. The
|
||
|
|
identified logical unit is the one mapped to a LUN by this
|
||
|
|
row."
|
||
|
|
::= { scsiLunMapEntry 3 }
|
||
|
|
|
||
|
|
scsiLunMapRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object allows an administrator to create and delete
|
||
|
|
this entry."
|
||
|
|
::= { scsiLunMapEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- Notifications
|
||
|
|
-- scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 }
|
||
|
|
scsiNotificationsPrefix OBJECT IDENTIFIER
|
||
|
|
::= { scsiNotifications 0 }
|
||
|
|
|
||
|
|
scsiTgtDeviceStatusChanged NOTIFICATION-TYPE
|
||
|
|
OBJECTS { scsiTgtDeviceStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" A notification will be generated for each occurrence of the
|
||
|
|
abnormal status (e.g., if the SCSI target device's current
|
||
|
|
status is abnormal) providing that the SCSI instance's value
|
||
|
|
of scsiInstScsiNotificationsEnable is enabled.
|
||
|
|
|
||
|
|
An SNMP agent implementing the SCSI MIB should not send more
|
||
|
|
than three SCSI identical notifications in any 10-second
|
||
|
|
period."
|
||
|
|
::= { scsiNotificationsPrefix 1 }
|
||
|
|
|
||
|
|
scsiLuStatusChanged NOTIFICATION-TYPE
|
||
|
|
OBJECTS { scsiLuStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" A notification will be generated each time that
|
||
|
|
scsiLuStatus will change providing that the SCSI instance's
|
||
|
|
value of scsiInstScsiNotificationsEnable is enabled.
|
||
|
|
An SNMP agent implementing the SCSI MIB should not send more
|
||
|
|
than three SCSI identical notifications in any 10-second
|
||
|
|
period."
|
||
|
|
::= { scsiNotificationsPrefix 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The next part defines the conformance groups in use for SCSI MIB.
|
||
|
|
scsiCompliances OBJECT IDENTIFIER ::= { scsiConformance 1 }
|
||
|
|
|
||
|
|
scsiCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Describes the requirements for compliance to this SCSI MIB.
|
||
|
|
If an implementation can be both a target and an initiator,
|
||
|
|
all groups are mandatory."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
scsiDeviceGroup
|
||
|
|
}
|
||
|
|
|
||
|
|
OBJECT scsiInstAlias
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not mandatory."
|
||
|
|
|
||
|
|
OBJECT scsiInstScsiNotificationsEnable
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not mandatory."
|
||
|
|
|
||
|
|
OBJECT scsiDeviceAlias
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not mandatory."
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with
|
||
|
|
-- the mandatory groups when the implementation has
|
||
|
|
-- SCSI target device.
|
||
|
|
|
||
|
|
GROUP scsiTargetGroup
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
have SCSI target devices."
|
||
|
|
GROUP scsiLunMapGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for system having the capabilities
|
||
|
|
of mapping local targets and logical units according remote
|
||
|
|
initiators."
|
||
|
|
|
||
|
|
OBJECT scsiAuthIntrDevOrPort
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
|
||
|
|
OBJECT scsiAuthIntrName
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
|
||
|
|
OBJECT scsiAuthIntrLunMapIndex
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
|
||
|
|
OBJECT scsiAuthIntrRowStatus
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required, and only one of the six
|
||
|
|
enumerated values for the RowStatus textual convention need
|
||
|
|
be supported, specifically: active(1)."
|
||
|
|
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with
|
||
|
|
-- the mandatory groups when the implementation has
|
||
|
|
-- SCSI initiator device.
|
||
|
|
|
||
|
|
GROUP scsiInitiatorGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
have SCSI initiator devices."
|
||
|
|
|
||
|
|
OBJECT scsiIntrDevTgtAccessMode
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION "Write access is not mandatory."
|
||
|
|
|
||
|
|
GROUP scsiDiscoveryGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for system having the capabilities
|
||
|
|
of discovering remote targets via local initiators."
|
||
|
|
|
||
|
|
OBJECT scsiLunMapLuIndex
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"Write access is not mandatory."
|
||
|
|
|
||
|
|
OBJECT scsiLunMapRowStatus
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required, and only one of the six
|
||
|
|
enumerated values for the RowStatus textual convention need
|
||
|
|
be supported, specifically: active(1)."
|
||
|
|
|
||
|
|
OBJECT scsiDscTgtDevOrPort
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not mandatory."
|
||
|
|
|
||
|
|
OBJECT scsiDscTgtName
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION "Write access is not mandatory."
|
||
|
|
|
||
|
|
OBJECT scsiDscTgtConfigured
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of true(1) is not mandatory neither the write
|
||
|
|
access."
|
||
|
|
|
||
|
|
OBJECT scsiDscTgtRowStatus
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required, and only one of the six
|
||
|
|
enumerated values for the RowStatus textual convention need
|
||
|
|
be supported, specifically: active(1)."
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with the mandatory
|
||
|
|
-- groups when the implementation can gather statistics.
|
||
|
|
GROUP scsiDeviceStatGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
can gather statistics."
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with the mandatory
|
||
|
|
-- groups when the implementation can gather statistics at the SCSI
|
||
|
|
-- initiator side.
|
||
|
|
GROUP scsiInitiatorStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
can gather statistics at SCSI initiator side."
|
||
|
|
GROUP scsiDiscoveryStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for system having the capabilities
|
||
|
|
of gathering statistics regarding remote targets via local
|
||
|
|
initiators."
|
||
|
|
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with the mandatory
|
||
|
|
-- groups when the implementation can gather statistics at the SCSI
|
||
|
|
-- target side.
|
||
|
|
GROUP scsiTargetStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
can gather statistics at SCSI target devices."
|
||
|
|
GROUP scsiLunMapStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for SCSI implementations able to map
|
||
|
|
local targets and logical units according remote initiators."
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with the mandatory
|
||
|
|
-- groups when the implementation is running at high speed and can
|
||
|
|
-- gather statistics at the SCSI initiator side.
|
||
|
|
GROUP scsiInitiatorHSStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
can gather statistics at SCSI initiator side and are running
|
||
|
|
at high speed."
|
||
|
|
GROUP scsiDiscoveryHSStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for system having the capabilities
|
||
|
|
of gathering statistics regarding remote targets via local
|
||
|
|
initiators and are running at high speed."
|
||
|
|
|
||
|
|
-- Conditionally mandatory groups to be included with the mandatory
|
||
|
|
-- groups when the implementation is running at high speed and can
|
||
|
|
-- gather statistics at the SCSI target side.
|
||
|
|
GROUP scsiTargetHSStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for all SCSI implementations that
|
||
|
|
can gather statistics at SCSI target devices in high speed
|
||
|
|
system."
|
||
|
|
GROUP scsiLunMapHSStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for SCSI implementations able to map
|
||
|
|
local targets and logical units according remote initiators
|
||
|
|
in high speed system."
|
||
|
|
::= { scsiCompliances 1 }
|
||
|
|
|
||
|
|
scsiGroups OBJECT IDENTIFIER ::= { scsiConformance 2 }
|
||
|
|
|
||
|
|
scsiDeviceGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiInstAlias,
|
||
|
|
scsiInstSoftwareIndex,
|
||
|
|
scsiInstVendorVersion,
|
||
|
|
scsiInstScsiNotificationsEnable,
|
||
|
|
scsiDeviceAlias,
|
||
|
|
scsiDeviceRole,
|
||
|
|
scsiDevicePortNumber,
|
||
|
|
|
||
|
|
scsiPortRole,
|
||
|
|
scsiPortTrnsptPtr,
|
||
|
|
scsiTrnsptType,
|
||
|
|
scsiTrnsptPointer,
|
||
|
|
scsiTrnsptDevName
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects providing information about SCSI
|
||
|
|
instances, devices and ports."
|
||
|
|
::= { scsiGroups 1 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiInitiatorGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiIntrDevTgtAccessMode,
|
||
|
|
scsiIntrPrtName,
|
||
|
|
scsiIntrPrtIdentifier,
|
||
|
|
scsiAttTgtPortDscTgtIdx,
|
||
|
|
scsiAttTgtPortName,
|
||
|
|
scsiAttTgtPortIdentifier
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is relevant for an initiator device and port."
|
||
|
|
::= { scsiGroups 2 }
|
||
|
|
|
||
|
|
scsiDiscoveryGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiDscTgtDevOrPort,
|
||
|
|
scsiDscTgtName,
|
||
|
|
scsiDscTgtConfigured,
|
||
|
|
scsiDscTgtDiscovered,
|
||
|
|
scsiDscTgtRowStatus,
|
||
|
|
scsiDscTgtLastCreation,
|
||
|
|
scsiDscLunLun,
|
||
|
|
scsiDscLunIdCodeSet,
|
||
|
|
scsiDscLunIdAssociation,
|
||
|
|
scsiDscLunIdType,
|
||
|
|
scsiDscLunIdValue
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is relevant for the discovered targets by an
|
||
|
|
initiator port."
|
||
|
|
::= { scsiGroups 3 }
|
||
|
|
|
||
|
|
scsiTargetGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiTgtDevNumberOfLUs,
|
||
|
|
scsiTgtDeviceStatus,
|
||
|
|
scsiTgtDevNonAccessibleLUs,
|
||
|
|
scsiTgtPortName,
|
||
|
|
|
||
|
|
scsiTgtPortIdentifier,
|
||
|
|
scsiAttIntrPrtAuthIntrIdx,
|
||
|
|
scsiAttIntrPrtName,
|
||
|
|
scsiAttIntrPrtId,
|
||
|
|
scsiLuDefaultLun,
|
||
|
|
scsiLuWwnName,
|
||
|
|
scsiLuVendorId,
|
||
|
|
scsiLuProductId,
|
||
|
|
scsiLuRevisionId,
|
||
|
|
scsiLuPeripheralType,
|
||
|
|
scsiLuStatus,
|
||
|
|
scsiLuState,
|
||
|
|
scsiLuIdCodeSet,
|
||
|
|
scsiLuIdAssociation,
|
||
|
|
scsiLuIdType,
|
||
|
|
scsiLuIdValue
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is relevant for a target device and port."
|
||
|
|
::= { scsiGroups 4 }
|
||
|
|
|
||
|
|
|
||
|
|
scsiLunMapGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiLunMapLuIndex,
|
||
|
|
scsiLunMapRowStatus,
|
||
|
|
scsiAuthIntrDevOrPort,
|
||
|
|
scsiAuthIntrName,
|
||
|
|
scsiAuthIntrLunMapIndex,
|
||
|
|
scsiAuthIntrLastCreation,
|
||
|
|
scsiAuthIntrRowStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of attributes regarding the
|
||
|
|
mapping between logical unit number, logical unit and target
|
||
|
|
device."
|
||
|
|
::= { scsiGroups 5}
|
||
|
|
|
||
|
|
scsiTargetStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiTgtPortInCommands,
|
||
|
|
scsiTgtPortWrittenMegaBytes,
|
||
|
|
scsiTgtPortReadMegaBytes,
|
||
|
|
scsiLuInCommands,
|
||
|
|
scsiLuReadMegaBytes,
|
||
|
|
scsiLuWrittenMegaBytes,
|
||
|
|
scsiLuInResets,
|
||
|
|
scsiLuOutQueueFullStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"This group is a collection of statistics for all
|
||
|
|
implementations of the SCSI MIB that contain targets."
|
||
|
|
::= { scsiGroups 6}
|
||
|
|
|
||
|
|
scsiTargetHSStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiTgtPortHSInCommands,
|
||
|
|
scsiLuHSInCommands
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of high speed statistics for all
|
||
|
|
implementations of the SCSI MIB that contain targets."
|
||
|
|
::= { scsiGroups 7}
|
||
|
|
|
||
|
|
scsiLunMapStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiAuthIntrAttachedTimes,
|
||
|
|
scsiAuthIntrOutCommands,
|
||
|
|
scsiAuthIntrReadMegaBytes,
|
||
|
|
scsiAuthIntrWrittenMegaBytes
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of statistics regarding
|
||
|
|
initiators authorized to attach local logical unit and target
|
||
|
|
device."
|
||
|
|
::= { scsiGroups 8}
|
||
|
|
|
||
|
|
scsiLunMapHSStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiAuthIntrHSOutCommands
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of high speed statistics
|
||
|
|
regarding initiators authorized to attach local logical unit
|
||
|
|
and target device."
|
||
|
|
::= { scsiGroups 9}
|
||
|
|
|
||
|
|
scsiInitiatorStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiIntrDevOutResets,
|
||
|
|
scsiIntrPrtOutCommands,
|
||
|
|
scsiIntrPrtWrittenMegaBytes,
|
||
|
|
scsiIntrPrtReadMegaBytes
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of statistics for all
|
||
|
|
implementations of the SCSI MIB that contain initiators."
|
||
|
|
::= { scsiGroups 10}
|
||
|
|
|
||
|
|
|
||
|
|
scsiInitiatorHSStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiIntrPrtHSOutCommands
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of high speed statistics for all
|
||
|
|
implementations of the SCSI MIB that contain initiators."
|
||
|
|
::= { scsiGroups 11}
|
||
|
|
|
||
|
|
scsiDiscoveryStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiDscTgtInCommands,
|
||
|
|
scsiDscTgtReadMegaBytes,
|
||
|
|
scsiDscTgtWrittenMegaBytes
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of statistics for all
|
||
|
|
implementations of the SCSI MIB that contain discovered
|
||
|
|
initiators."
|
||
|
|
::= { scsiGroups 12}
|
||
|
|
|
||
|
|
scsiDiscoveryHSStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiDscTgtHSInCommands
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is a collection of high speed statistics for all
|
||
|
|
implementations of the SCSI MIB that contain discovered
|
||
|
|
initiators."
|
||
|
|
::= { scsiGroups 13}
|
||
|
|
|
||
|
|
scsiDeviceStatGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
scsiDeviceResets,
|
||
|
|
scsiPortBusyStatuses
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics regarding about SCSI devices and
|
||
|
|
ports."
|
||
|
|
::= { scsiGroups 14 }
|
||
|
|
|
||
|
|
END
|
||
|
|
|