david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ericsson/XF-RADIOLINK-PTP-RADIO-MIB

3867 lines
120 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
XF-RADIOLINK-PTP-RADIO-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex
FROM ENTITY-MIB
ifIndex
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32
FROM SNMPv2-SMI
xfRadioLink
FROM XF-TOP-MIB
xfTermRowIndex
FROM XF-RADIOLINK-PTP-TERMINAL-MIB;
xfRadioLinkPtpRadioMIB MODULE-IDENTITY
LAST-UPDATED "202009220000Z" -- 22 September 2020
ORGANIZATION
"Ericsson AB"
CONTACT-INFO
"
Ericsson AB
Transmission & Transport Networks
SE-431 84 Molndal
Sweden
"
DESCRIPTION
"
This MIB defines objects for point-to-point Radio Link RAUs.
"
REVISION "202009220000Z" -- 22 September 2020
DESCRIPTION
"
Rev. PY26
- Added new MOs in xfRfIfPowerTable:
* xfRfAtpcFallbackOutputPower
* xfRfAtpcFallbackEnable
* xfRfAtpcFallbackTimer
"
REVISION "201911260000Z" -- 26 November 2019
DESCRIPTION
"
Rev. PY25
- Added new MOs in xfRAuTable:
* xfRauBoosterCapability
* xfRauBoosterSelectedIndex
"
REVISION "201910140000Z" -- 14 October 2019
DESCRIPTION
"
Rev. PY24
- Added new MOs in xfRfIfPowerTable:
* xfRfOutputPower8192QAM
* xfRfOutputPower16384QAM
"
REVISION "201906040000Z" -- 04 June 2019
DESCRIPTION
"
Rev. PY23
- Added new MOs in ifCableMonitoringTable:
* xfRfOutlierTrigger
* xfRfRangeTrigger
* xfRfStddevTrigger
* xfRfDegradationTrigger
* xfRfMarginTrigger
"
REVISION "201905160000Z" -- 16 May 2019
DESCRIPTION
"
Rev. PY22
- Added new MOs in ifCableMonitoringTable:
* xfRfOutlierValue
* xfRfRangeValue
* xfRfStddevValue
* xfRfDegradationValue
* xfRfMarginValue
"
REVISION "201904300000Z" -- 30 April 2019
DESCRIPTION
"
Rev. PY21
- Added new table 'xfSdcTable'.
- Added new MOs in 'xfRfIfPowerTable':
* xfRfCurrentInputPowerSdcMain
* xfRfCurrentInputPowerSdcDiv
"
REVISION "201901170000Z" -- 17 January 2019
DESCRIPTION
"
Rev. PY20
- Removed the following alarms in RFAlarms - Textual convention:
* IfCableDamaged
* RccWarning
- Added the following alarms in RFAlarms - Textual convention:
* AgcOutlier
* AgcRange
* AgcStddev
* AgcDegradation
* AgcMargin
"
REVISION "201810290000Z" -- 29 October 2018
DESCRIPTION
"
Rev. PY19
New MO 'xfRFSpectrumDiagProgress' added in xfRFSpectrumDiagTable.
"
REVISION "201809030000Z" -- 3 September 2018
DESCRIPTION
"
Rev. PY18
New MOs added in xfRFSpectrumDiagTable.
"
REVISION "201804060000Z" -- 6 April 2018
DESCRIPTION
"
Rev. PY17
Updated unit of measurement of XPI level in performance monitoring counters:
from dBm to dB
"
REVISION "201801300000Z" -- 30 January 2018
DESCRIPTION
"
Rev. PY16
New MO 'xfRfTaps' added in xfRfIfPowerTable.
"
REVISION "201711230000Z" -- 23 November 2017
DESCRIPTION
"
Rev. PY15
Changed definition of 'xfRFAlarms' MO.
"
REVISION "201709190000Z" -- 19 September 2017
DESCRIPTION
"
Rev. PY14
Updated comment in xfRFDuplexDistance.
"
REVISION "201709050000Z" -- 05 September 2017
DESCRIPTION
"
Rev. PY13
- Added the following alarms in RFAlarms - Textual convention:
* IfCableDamaged
* RccWarning
"
REVISION "201707250000Z" -- 25 July 2017
DESCRIPTION
"
Rev. PY12
xfRAUAlarmStatus MO extended with definition of 'companionRauMismatch' alarm.
"
REVISION "201706280000Z" -- 28 June 2017
DESCRIPTION
"
Rev. PY11
Corrected range for xfRFDuplexDistance MO.
"
REVISION "201705240000Z" -- 24 May 2017
DESCRIPTION
"
Rev. PY10
Introduction of new FF 60 MHz.
"
REVISION "201612200000Z" -- 20 December 2016
DESCRIPTION
"
Rev. PY9
- New MOs Added 'xfRFBoosterGain' and 'xfRFBoosterMaxInputPower' 'xfRFBoosterCapability'
'xfRFBoosterProductNumber' and 'xfRFBoosterHWRevision' in xfRFPowerTable.
"
REVISION "201606160000Z" -- 16 June 2016
DESCRIPTION
"
Rev. PY8
- Added definition of 'remoteRfIfHighestSeverityAlarm' alarm in 'RFAlarms' textual convention.
"
REVISION "201606010000Z" -- 01 June 2016
DESCRIPTION
"
Rev. PY7
- New MOs 'xfRfAvailableOutputPowerType' and 'xfRfSelectedOutputPowerType'
added in xfRfIfPowerTable.
"
REVISION "201605160000Z" -- 16 May 2016
DESCRIPTION
"
Rev. PY6
- Updated description for some MOs, to better specify
'default' and 'invalid' output power definitions.
"
REVISION "201605100000Z" -- 10 May 2016
DESCRIPTION
"
Rev. PY5
- 'Obsolete' MOs set back to 'current' status
in order to remove warnings.
"
REVISION "201604120000Z" -- 12 April 2016
DESCRIPTION
"
Rev. PY4
- Updated description for xfRfInputPowerReset MO.
"
REVISION "201602220000Z" -- 22 February 2016
DESCRIPTION
"
Rev. PY3
- Description updated for some MOs.
- Readability improvements (formatting).
"
REVISION "201602060000Z" -- 06 February 2016
DESCRIPTION
"
Rev. PY2
- Added the following alarms in RFAlarms - Textual convention:
* rlts1Counter15m
* rlts2Counter15m
* rltmCounter15m
* tlts1Counter15m
* tltmCounter15m
* rlts1Counter24h
* rlts2Counter24h
* rltmCounter24h
* tlts1Counter24h
* tltmCounter24h
- Obsoleted the following MOs in table xfRFPowerTable and
moved-renamed in xfRAUIFTable:
* xfRfMaxMSELast7Days
* xfRfMinMSELast7Days
* xfRfMaxXPILast7Days
* xfRfMinXPILast7Days
- Added MOs for Extended RF PM in table xfRfIfPowerTable:
* xfRfMeanInputPower1m
* xfRfMaxOutputPowerLast7Days
* xfRfMinOutputPowerLast7Days
* xfRfMaxOutputPowerSinceReset
* xfRfMinOutputPowerSinceReset
* xfRfOutputPowerReset
"
REVISION "201602050000Z" -- 05 February 2016
DESCRIPTION
"
Rev. PY1
- Updated description for xfRFCurrentStepNumber.
- Updated description for xfRFCurrentStepNumberRx.
"
REVISION "201512110000Z" -- 11 December 2015
DESCRIPTION
"
Rev. PX9
xfRfIfPowerTable moved at the end of file, fixing HU44212.
"
REVISION "201511050000Z" -- 05 November 2015
DESCRIPTION
"
Rev. PX8
- atpcVersionMismatch alarm definition removed from xfRAUAlarmStatus object (never used before).
- insufficientResourceRauXpic alarm definition added to xfRAUAlarmStatus object.
"
REVISION "201508310000Z" -- 31 August 2015
DESCRIPTION
"
Rev. PX7
* New objects added in xfRFIFTable:
- xfRFDuplexType
- xfRFDuplexConfig
- xfRFDuplexDistance
"
REVISION "201507020000Z" -- 2 July 2015
DESCRIPTION
"
Rev. PX6
Added new tables xfRFSpectrumDiagTable and xfRFSpectrumDiagResultTable
"
REVISION "201506250000Z" -- 25 June 2015
DESCRIPTION
"
Rev. PX5
Merged content from 19089-FAL1044129_1_X_PBB5.
"
REVISION "201506080000Z" -- 8 June 2015
DESCRIPTION
"
Rev. PX4
Updated description text for the following MOs:
xfRFMaxMSELast7Days, xfRFMinMSELast7Days
"
REVISION "201504230000Z" -- 23 April 2015
DESCRIPTION
"
Rev. PX3
- xfRfSelectedMinOutputPower object added.
- xfRfSelectedMaxOutputPower object added.
"
REVISION "201504200000Z" -- 20 April 2015
DESCRIPTION
"
Rev. PX2
- xfRfAtpcSelectedInputPowerFar object renamed in xfRfAtpcTargetInputPowerFE.
"
REVISION "201504020000Z" -- 02 April 2015
DESCRIPTION
"
Rev. PX1
- xfRauAtpcVersion object added in xfRAUTable.
- Definition of xfRAUAlarmStatus extended with atpcVersionMismatch.
- Added new table xfRfIfPowerTable.
"
REVISION "201502260000Z" -- 26 February 2015
DESCRIPTION
"
Add new MIBs to xfRFPowerTable for improved power monitoring.
New MOs: xfRFMeanInputPower1m, xfRFMaxOutputPowerLast7Days,
xfRFMinOutputPowerLast7Days, xfRFMaxOutputPowerSinceReset,
xfRFMinOutputPowerSinceReset, xfRFMaxMSELast7Days,
xfRFMinMSELast7Days, xfRFMaxXPILast7Days,
xfRFMinXPILast7Days, xfRFOutputPowerReset
"
REVISION "201501231000Z" -- 23 January 2015
DESCRIPTION
"
Modified definition for xfRauNotes to have a valid syntax definition.
"
REVISION "201501230000Z" -- 23 January 2015
DESCRIPTION
"
Add new MIB xfRAUNotes to xfRAUTable.
"
REVISION "201501090000Z" -- 09 January 2015
DESCRIPTION
"
Rev. V
- Changed MO: xfRAUSubBand in xfRAUTable becomes R/W (previously R only)
- New Table: xfRAUSubBandTable (as xfRadioLinkPtpRadioObjects object)
"
REVISION "201402200000Z" -- 20 Febuary 2014
DESCRIPTION
"
Rev. PU2
- New value: sdcDadeCalMismatch in xfRAUAlarmStatus
"
REVISION "201311220000Z" -- 22 November 2013
DESCRIPTION
"
Rev. PU1
New MO: xfRFCurrentInputPowerSdcMain and xfRFCurrentInputPowerSdcDiv in xfRFPowerTable
"
REVISION "201311191400Z" -- 19 Nov 2013
DESCRIPTION
"
Rev. T
- Official R-State for M14A
"
REVISION "201105230000Z" -- 23 May 2011
DESCRIPTION
"
Rev. S
- Official R-State for TN 4.4 FP
"
REVISION "201102090000Z" -- 09 February 2011
DESCRIPTION
"
Rev. PS4
- New MO: xfRAUCarrierMode in xfRAUCapabilityTable
"
REVISION "201102010000Z" -- 01 February 2011
DESCRIPTION
"
Rev. PS3
- Correction for new 1024-QAM
"
REVISION "201012100000Z" -- 10 December 2010
DESCRIPTION
"
Rev. PS2
- Added 1024-QAM
"
REVISION "201010200000Z" -- 20 October 2010
DESCRIPTION
"
Rev. PS1
- New MO: xfRFAtpcFallbackTimer in xfRFPowerTable
"
REVISION "201009230000Z" -- 23 September 20010
DESCRIPTION
"
Rev. N
- Changed RfInputThreshold default value to -93dBm
"
REVISION "201006150000Z" -- 15 June 20010
DESCRIPTION
"
Rev. PN1
- New MO: xfRAURxCapability in xfRAUTable
"
REVISION "201006040000Z" -- 04 June 2010
DESCRIPTION
"
Rev. PN
- New value: swNeedUpdate in xfRAUAlarmStatus
"
REVISION "201001190000Z" -- 19 January 2010
DESCRIPTION
"
Rev. M
- Official R-State for TN 4.3
"
REVISION "200912010000Z" -- 01 December 2009
DESCRIPTION
"
Rev. PM2
- Change name on xfRFAtpcFallbackMaxOutputPower to xfRFAtpcFallbackOutputPower
- Removed warnings about xfRFAtpcFallbackOutputPower(xfRFAtpcFallbackMaxOutputPower) and
xfRFAtpcFallbackEnable not included in xfRadioLinkPtpRadioCompleteGroup
- Updated xfRFAlarms
- New alarm: rfOutputLevelATPC
- Updated xfRAUAlarmStatus
- New alarm: ConfigurationInvalid
"
REVISION "200911180000Z" -- 18 November 2009
DESCRIPTION
"
Rev. PM1
- New MO: xfRFAtpcFallbackMaxOutputPower and xfRFAtpcFallbackEnable in xfRFPowerTable
"
REVISION "200906260000Z" -- 26 June 2009
DESCRIPTION
"
Rev. L
- Update of revision history
"
REVISION "200906240000Z" -- 24 June 2009
DESCRIPTION
"
Rev. L
- Official Rev for TN 4.2
"
REVISION "200904200000Z" -- 20 April 2009
DESCRIPTION
"
Rev. K
- Official Rev for TN 4.1 FP
"
REVISION "200904140000Z"
DESCRIPTION
"
Rev. PK8
- Changes for TN 4.2
- Spectrum Effeciency Class index values have changed
- Adde new Spectrum Effeciency Class values
- Added channelspacing chsp3500kHz(10)
"
REVISION "200810020000Z"
DESCRIPTION
"
Rev. PK7
- Changes for TN 4.1/4.2
- Removed table: xfRFOutputPowerTable
- New MO: xfRFOutputPowerTable in xfRFPowerTable
- Fixed double index issue in xfRAUCapabilityTable
"
REVISION "200809160000Z"
DESCRIPTION
"
Rev. PK6
- Changes for TN 4.1
- New table: xfRFOutputPowerTable
"
REVISION "200806250000Z"
DESCRIPTION
"
Rev. PK5
- Changes for TN 4.1
- Changes in table: xfRAUCapabilityTable (xfRAUChannelModulation)
"
REVISION "200806240000Z"
DESCRIPTION
"
Rev. PK4
- Changes for TN 4.1
- Changes in table: xfRAUCapabilityTable (xfRAUChannelModulation)
"
REVISION "200806180000Z"
DESCRIPTION
"
Rev. PK3
- Changes for TN 4.1
- Changes in table: xfRAUCapabilityTable
"
REVISION "200806170000Z"
DESCRIPTION
"
Rev. PK2
- Changes for TN 4.1
- Changes in table: xfRAUCapabilityTable
"
REVISION "200806040000Z"
DESCRIPTION
"
Rev. PK1
- Changes for TN 4.1
- New table: xfRAUCapabilityTable
"
REVISION "200706040000Z"
DESCRIPTION
"
Rev. J
- MIB files changes according to 1/15519-CRH109625/1 Uae Rev U
- xfRFLoopEnable: Changed comment regarding far end limitation to no access
- xfRFAttenuator: Changed comment regarding far end limitation.
- xfRFInputPowerReset: Changed comment regarding far end limitation to read-write (Traffic Node only)
"
REVISION "200609191320Z"
DESCRIPTION
"
Rev. H
- MIB files changes according to 1/15519-CRH109625/1 Uae Rev M + errata
- Changed syntax of object xfRFTxAdminStatus for better readability in a MIB-browser
"
REVISION "200608290000Z"
DESCRIPTION
"
Rev. PH1
- Added 64-QAM to RAUModCapability
"
REVISION "200603200000Z"
DESCRIPTION
"
Rev. G
- MIB files changes according to 1/15519-CRH109625/1 Uae Rev K
- Addition of Enum values for RAUModCapability to support ANSI
"
REVISION "200602240000Z"
DESCRIPTION
"
Rev. F
- Access restrictions explained in the description field for each MO
"
REVISION "200601310000Z"
DESCRIPTION
"
Rev. E
- New value (0) for xfRFMaxInputPowerLast7Days and xfRFMinInputPowerLast7Days
- xfRFRtpcSelectedOutputPower: Value 255 no longer valid
- xfRFAtpcMaxOutputPower: Value 255 no longer valid. New value: 254
- xfRFAtpcSelectedInputPowerFar: Value 255 no longer valid. New default value
- xfRFAttenuator: Value 255 no longer valid. New default value
"
REVISION "200412130000Z"
DESCRIPTION
"
Rev. D
- Changes according to 1/15519-CRH109625/1 Uae Rev D
- New value (other) for RFTxAdminStatus
- Changed MO xfRFInputPowerThreshold to MO xfRFInputAlarmThreshold (xfRFPowerTable)
- MO xfRFRtpcSelectedOutputPower: Value 254 = max power (default)
- MO xfRFAttenuator: Value 255 (new default)
- DEFVAL removed. Default value info declared in corresponding description fields
"
REVISION "200407020000Z"
DESCRIPTION
"
Rev. C
- All config alarms are removed
"
REVISION "200406160000Z"
DESCRIPTION
"
Rev. B
- All config alarms are defined
- Alarms are updated with new names
"
REVISION "200405250000Z"
DESCRIPTION
"
Rev. PB2
- Minor changes
"
REVISION "200404260000Z"
DESCRIPTION
"
Rev. PB1
- Added MO: xfRAUTemperature, xfRFInputPowerAlarmThreshold, xfRFLoopEnable
- Added Table: xfRFPowerTable
"
REVISION "200401200000Z"
DESCRIPTION
"
Rev. A
- Other is added to integer enumerations
- RFTxStatus object is split into admin and oper objects
- Integer types updated
"
REVISION "200312171000Z"
DESCRIPTION
"
Rev. PA1
- Initial revision
"
::= { xfRadioLink 3 }
--
-- Textual conventions
--
RFTxOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC enumerates the Tx operational status."
SYNTAX INTEGER
{
other(1),
txOff(2),
txOn(3),
txStandby(4)
}
RAURfLoopAvailable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC enumerates the RF loop."
SYNTAX INTEGER
{
other(1),
rfLoopAvailable(2),
rfLoopNotAvailable(3)
}
RAUAtpcCapability ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC enumerates the ATPC capability."
SYNTAX INTEGER
{
other(1),
noAtpcSupport(2),
doesNotExist(3),
atpcCapabilityUnknown(4),
supportsAtpc(5)
}
RAUModCapability ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
This TC enumerates the modulation capabilities.
Modulation capabilities is indicated by 5 bits:
bits 01234
00000 undetermined
00001 C-QPSK
00010 16-QAM
00011 C-QPSK & 16-QAM
00100 128-QAM
01000 32-QAM
10000 64-QAM
...
11111 C-QPSK & 16-QAM & 128-QAM & 32-QAM & 64-QAM
"
SYNTAX BITS
{
cqpsk(0),
qam16(1),
qam128(2),
qam32(3),
qam64(4)
}
RAUChannelSpacingCapability ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Channel spacing capability."
SYNTAX INTEGER
{
chspUnknown(0),
chsp7MHz(1),
chsp14MHz(2),
chsp20MHz(3),
chsp28MHz(4),
chsp30MHz(5),
chsp40MHz(6),
chsp50MHz(7),
chsp56MHz(8),
chsp10MHz(9),
chsp3500KHz(10),
chsp60MHz(11)
}
RauSec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Spectrum Effeciency Class."
SYNTAX INTEGER
{
other(1),
sec2(2),
sec3(3),
sec4L(4),
sec4H(5),
sec5A(6),
sec5B(7),
sec6A(8),
sec6B(9)
}
RAUModulation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of modulation."
SYNTAX INTEGER
{
other(1),
cqpsk(2),
qam16(3),
qam128(4),
qam32(5),
qam64(6),
qam4(7),
qam8(8),
qam256(9),
qam512(10),
qam1024(11)
}
ATPCFallbackEnable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ATPC fallback enable status."
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
RfOutputPower ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"RF output power in dBm."
SYNTAX Integer32 (-100..45|255)
RfInputPower ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"RF Input power in dBm/10."
SYNTAX Integer32 (-999..-200|0)
BoosterCapability ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Booster capabilities values codes."
SYNTAX INTEGER
{
other(1),
noBoosterSupport(2),
boosterSupport(3)
}
--
-- Node definitions
--
xfRadioLinkPtpRadioObjects OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioMIB 1 }
xfRadioLinkPtpRadioConformance OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioMIB 2 }
------------------------------------------------------------------------------
-- xfRAUTable
------------------------------------------------------------------------------
xfRAUTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRAUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-point radios managed objects.
Table indexed with entPhysicalIndex.
"
::= { xfRadioLinkPtpRadioObjects 1 }
xfRAUEntry OBJECT-TYPE
SYNTAX XfRAUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in xfRadioTable."
INDEX { entPhysicalIndex }
::= { xfRAUTable 1 }
XfRAUEntry ::=
SEQUENCE
{
xfRAUAlarmStatus BITS,
xfRAURfLoopAvailable RAURfLoopAvailable,
xfRAUAtpcCapability RAUAtpcCapability,
xfRAULocalCtrlCapability INTEGER,
xfRAUModCapability RAUModCapability,
xfRAUFrequencyband Unsigned32,
xfRAUSubBand Unsigned32,
xfRAUTemperature Integer32,
xfRAUProtectionPath INTEGER,
xfRAURxCapability INTEGER,
xfRAUNotes OCTET STRING,
xfRauAtpcVersion INTEGER,
xfRauBoosterCapability BoosterCapability,
xfRauBoosterSelectedIndex Integer32
}
--
-- xfRAUTable MOs
--
xfRAUAlarmStatus OBJECT-TYPE
SYNTAX BITS
{
atpcCapability0(0),
atpcCapability1(1),
atpcCapability2(2),
configurationInvalid0(3),
configurationInvalid1(4),
configurationInvalid2(5),
sdcHwErrorMain0(6),
sdcHwErrorMain1(7),
sdcHwErrorMain2(8),
sdcHwErrorDiv0(9),
sdcHwErrorDiv1(10),
sdcHwErrorDiv2(11),
sdcDadeCalMismatch0(12),
sdcDadeCalMismatch1(13),
sdcDadeCalMismatch2(14),
insufficientResourceRauXpic0(15),
insufficientResourceRauXpic1(16),
insufficientResourceRauXpic2(17),
companionRauMismatch0(18),
companionRauMismatch1(19),
companionRauMismatch2(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the alarm status of the radio unit.
atpcCability - The terminal is configured for ATPC, but the radio does not support ATPC.
This alarm is activated only if ATPC is turned on (any direction).
sdcHwErrorMain - Received RF input signal level for Main path (of SDC TRX) has dropped below the threshold for the receiver.
sdcHwErrorDiv - Received RF input signal level for Diversity path (of SDC TRX) has dropped below the threshold for the receiver.
sdcDadeCalMismatch - A TRX is connected and its Serial Number doesn't match with the serial number stored into MO xfTRXSdcSerialNumber.
insufficientResourceRauXpic - Connected RAU is missing capabilities for XPIC.
companionRauMismatch - Connected RAU does not match with the companion one, either in 1+1 RLP or XPIC.
"
::= { xfRAUEntry 1 }
xfRAURfLoopAvailable OBJECT-TYPE
SYNTAX RAURfLoopAvailable
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object inidicates if RF loop is available in radio unit.
"
::= { xfRAUEntry 2 }
xfRAUAtpcCapability OBJECT-TYPE
SYNTAX RAUAtpcCapability
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates if the radio unit supports ATPC or not.
"
::= { xfRAUEntry 3 }
xfRAULocalCtrlCapability OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noLocalControlSupport(2),
supportsLocalControl(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates if the radio unit supports local
transmit power control or not.
"
::= { xfRAUEntry 4 }
xfRAUModCapability OBJECT-TYPE
SYNTAX RAUModCapability
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the modulation methods supported
by the radio unit.
"
::= { xfRAUEntry 5 }
xfRAUFrequencyband OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the frequency band for the radio unit.
"
::= { xfRAUEntry 6 }
xfRAUSubBand OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object shows the sub band (Index) for the radio unit.
"
::= { xfRAUEntry 7 }
xfRAUTemperature OBJECT-TYPE
SYNTAX Integer32 (-127..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the temperature, in degree Celsius, inside
the radio unit.
"
::= { xfRAUEntry 8 }
xfRAUProtectionPath OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rauRa1(2),
rauRa2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates what radio path the radio belongs to.
"
::= { xfRAUEntry 9 }
xfRAURxCapability OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rxSupport(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates if the radio unit support RX configuration.
"
::= { xfRAUEntry 10 }
xfRAUNotes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..800))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"You can add information in this description field,
for example polarization, antenna type or logging a site visit."
::= { xfRAUEntry 11 }
xfRauAtpcVersion OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
version1(2),
version2(3),
version3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object represents the RAU ATPC version.
"
::= { xfRAUEntry 12 }
xfRauBoosterCapability OBJECT-TYPE
SYNTAX BoosterCapability
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object represents the Booster capability for a link.
"
::= { xfRAUEntry 13 }
xfRauBoosterSelectedIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object represents the Booster selected index for a link.
"
::= { xfRAUEntry 14 }
------------------------------------------------------------------------------
-- xfRFIFTable
------------------------------------------------------------------------------
xfRFIFTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRFIFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-point radios RF IF managed objects.
Table indexed with ifIndex.
"
::= { xfRadioLinkPtpRadioObjects 2 }
xfRFIFEntry OBJECT-TYPE
SYNTAX XfRFIFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRFIFTable."
INDEX { ifIndex }
::= { xfRFIFTable 1 }
XfRFIFEntry ::=
SEQUENCE
{
xfRFBaseTxFrequency Unsigned32,
xfRFBaseRxFrequency Unsigned32,
xfRFStepSize Unsigned32,
xfRFStepLimitLow Unsigned32,
xfRFStepLimitHigh Unsigned32,
xfRFCurrentStepNumber Unsigned32,
xfRFTxOperStatus RFTxOperStatus,
xfRFTxAdminStatus INTEGER,
xfRFLoopEnable INTEGER,
xfRFAlarms BITS,
xfRFStatus BITS,
xfRFStepSizeRx Unsigned32,
xfRFStepLimitLowRx Unsigned32,
xfRFStepLimitHighRx Unsigned32,
xfRFCurrentStepNumberRx Unsigned32,
xfRFDuplexType INTEGER,
xfRFDuplexConfig INTEGER,
xfRFDuplexDistance Integer32
}
--
-- xfRFIFTable MOs
--
xfRFBaseTxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the Tx frequency in KHz when frequency
step number is 0.
"
::= { xfRFIFEntry 1 }
xfRFBaseRxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the Rx frequency in KHz when frequency.
step number is 0
"
::= { xfRFIFEntry 2 }
xfRFStepSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the frequency step size in KHz.
"
::= { xfRFIFEntry 3 }
xfRFStepLimitLow OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the lowest allowed frequency step number.
"
::= { xfRFIFEntry 4 }
xfRFStepLimitHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the highest allowed frequency step number.
"
::= { xfRFIFEntry 5 }
xfRFCurrentStepNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets/shows the frequency step number.
0 = frequency not yet defined.
For Classic RAUs, TX and RX frequencies can not be set individually.
The span between them is always fixed and depends on different frequency and sub band.
- To calculate step number for TX and RX, use the following formulas:
New step number = (TX frequency - XfRAUBaseTxFrequency) / XfRAUStepSize
New step number = (RX frequency - xfRAUBaseRxFrequency) / XfRAUStepSize
- To calculate TX and RX frequencies, use the following formulas:
TX frequency = XfRAUBaseTxFrequency + XfRAUCurrentStepNumber * XfRAUStepSize
RX frequency = XfRAUBaseRxFrequency + XfRAUCurrentStepNumber * XfRAUStepSize
For Agile RAUs, the TX and RX frequencies can be set individually.
Above formulas are only valid for TX frequency.
For RX frequency, xfRFCurrentStepNumberRx must be used.
Default value: 0
"
::= { xfRFIFEntry 6 }
xfRFTxOperStatus OBJECT-TYPE
SYNTAX RFTxOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the operational status of the transmitter.
"
::= { xfRFIFEntry 7 }
xfRFTxAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
txOff(2),
txOn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets the desired status of the transmitter.
Value other(1) not settable.
Especially for far end:
txOff(2), requests far end transmitter to be turned off.
txOn(3), requests far end transmitter to be turned on.
Default value: txOff(2) - near end.
other(1) - far end.
"
::= { xfRFIFEntry 8 }
xfRFLoopEnable OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage RF loop.
Default value: disable(3).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFEntry 9 }
xfRFAlarms OBJECT-TYPE
SYNTAX BITS
{
txFrequency0(0),
txFrequency1(1),
txFrequency2(2),
rxFrequency0(3),
rxFrequency1(4),
rxFrequency2(5),
rfOutputLevel0(6),
rfOutputLevel1(7),
rfOutputLevel2(8),
rxAfc0(9),
rxAfc1(10),
rxAfc2(11),
rfInputLevel0(12),
rfInputLevel1(13),
rfInputLevel2(14),
rfInputThreshold0(15),
rfInputThreshold1(16),
rfInputThreshold2(17),
rfOutputLevelATPC0(18),
rfOutputLevelATPC1(19),
rfOutputLevelATPC2(20),
sdcRfInputLevelMain0(21),
sdcRfInputLevelMain1(22),
sdcRfInputLevelMain2(23),
sdcRfInputLevelDiv0(24),
sdcRfInputLevelDiv1(25),
sdcRfInputLevelDiv2(26),
rlts1Counter15m0(27),
rlts1Counter15m1(28),
rlts1Counter15m2(29),
rlts2Counter15m0(30),
rlts2Counter15m1(31),
rlts2Counter15m2(32),
rltmCounter15m0(33),
rltmCounter15m1(34),
rltmCounter15m2(35),
tlts1Counter15m0(36),
tlts1Counter15m1(37),
tlts1Counter15m2(38),
tltmCounter15m0(39),
tltmCounter15m1(40),
tltmCounter15m2(41),
rlts1Counter24h0(42),
rlts1Counter24h1(43),
rlts1Counter24h2(44),
rlts2Counter24h0(45),
rlts2Counter24h1(46),
rlts2Counter24h2(47),
rltmCounter24h0(48),
rltmCounter24h1(49),
rltmCounter24h2(50),
tlts1Counter24h0(51),
tlts1Counter24h1(52),
tlts1Counter24h2(53),
tltmCounter24h0(54),
tltmCounter24h1(55),
tltmCounter24h2(56),
remoteRfIfHighestSeverityAlarm0(57),
remoteRfIfHighestSeverityAlarm1(58),
remoteRfIfHighestSeverityAlarm2(59),
ifcabledamaged0(60),
ifcabledamaged1(61),
ifcabledamaged2(62)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This TC enumerates the alarms for RF interface.
txFrequency - Transmitter frequency synthesizer loop is unlocked.
rxFrequency - Receiver frequency synthesizer loop is unlocked.
rfOutputLevel - Major degradation of transmitter output power is detected.
rxAfc - The frequency of the received signal is outside the range of the Automatic Frequency Control in the RAU receiver.
rfInputLevel - Receiver RF input signal level has dropped below the threshold for the receiver.
rfInputThreshold - The RF input level has dropped below the xfRFInputAlarmThreshold.
rfOutputLevelATPC - The transmitter output power has been continuously at 'Patpc,max' for too long.
This can occur due to several reasons:
* The operator has set 'Patpc,max' too low.
* The hop attenuation has increased (steady-state).
* The transmitter PA is v.
* The LNA in Rx is deteriorating.
"
::= { xfRFIFEntry 10 }
xfRFStatus OBJECT-TYPE
SYNTAX BITS
{
rfLoop0(0),
rfLoop1(1),
rfLoop2(2),
txOff0(3),
txOff1(4),
txOff2(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the RAU status.
rfLoop - Warns if RF-loop is enabled on RAU
txOff - Warns if TX is manually set to off
"
::= { xfRFIFEntry 11 }
xfRFStepSizeRx OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the Rx frequency step size in KHz.
"
::= { xfRFIFEntry 12 }
xfRFStepLimitLowRx OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the Rx lowest allowed frequency step number.
"
::= { xfRFIFEntry 13 }
xfRFStepLimitHighRx OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the Rx highest allowed frequency step number.
"
::= { xfRFIFEntry 14 }
xfRFCurrentStepNumberRx OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets/shows the RX frequency step number for Agile RAUs.
0 = frequency not yet defined.
- To calculate step number for RX, use the following formula:
New step number Rx = (RX frequency - xfRAUBaseRxFrequency) / XfRAUStepSizeRx
- To calculate RX frequency, use the following formula:
RX frequency = XfRAUBaseRxFrequency + XfRAUCurrentStepNumberRx * XfRAUStepSizeRx
Default value: 0
"
::= { xfRFIFEntry 15 }
xfRFDuplexType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
fixed(2),
variable(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object tells the duplex frequency mode for the RAU:
- fixed: Tx frequency only can be set by operator, Rx frequency is
automatically set on the basis of (fixed) RAU duplex frequency
- variable: duplex frequency can be configured by operator
"
::= { xfRFIFEntry 16 }
xfRFDuplexConfig OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object enables setting of duplex frequency for the RAU.
It is always disabled(3) and can not be overwritten if xfRFDuplexType = fixed(2).
"
::= { xfRFIFEntry 17 }
xfRFDuplexDistance OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is aimed to select the duplex distance for the RAU.
It can only be set if xfRFDuplexConfig = enabled(2), so that:
xfRFDuplexDistance = Tx Frequency - Rx Frequency
Otherwise, it is automatically filled on the basis of Tx and Rx
frequency settings, and can not be overwritten.
"
::= { xfRFIFEntry 18 }
------------------------------------------------------------------------------
-- xfRFPowerTable
------------------------------------------------------------------------------
xfRFPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRFPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-point radios managed objects.
Table indexed with ifIndex.
"
::= { xfRadioLinkPtpRadioObjects 3 }
xfRFPowerEntry OBJECT-TYPE
SYNTAX XfRFPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRFPowerTable."
INDEX { ifIndex }
::= { xfRFPowerTable 1 }
XfRFPowerEntry ::=
SEQUENCE
{
xfRFCurrentOutputPower Integer32,
xfRFRtpcMinOutputPower Integer32,
xfRFRtpcMaxOutputPower Integer32,
xfRFRtpcSelectedOutputPower Integer32,
xfRFAtpcMinOutputPower Integer32,
xfRFAtpcMaxOutputPower Integer32,
xfRFAtpcMinInputPowerFar Integer32,
xfRFAtpcSelectedInputPowerFar Integer32,
xfRFAttenuator Integer32,
xfRFCurrentInputPower Integer32,
xfRFMaxInputPowerLast7Days Integer32,
xfRFMinInputPowerLast7Days Integer32,
xfRFMaxInputPowerSinceReset Integer32,
xfRFMinInputPowerSinceReset Integer32,
xfRFInputPowerReset INTEGER,
xfRFInputAlarmThreshold Integer32,
xfRFOutputPower4QAM Integer32,
xfRFOutputPower8QAM Integer32,
xfRFOutputPower16QAM Integer32,
xfRFOutputPower32QAM Integer32,
xfRFOutputPower64QAM Integer32,
xfRFOutputPower128QAM Integer32,
xfRFOutputPower256QAM Integer32,
xfRFOutputPower512QAM Integer32,
xfRFAtpcFallbackOutputPower Integer32,
xfRFAtpcFallbackEnable ATPCFallbackEnable,
xfRFAtpcFallbackTimer Integer32,
xfRFOutputPower1024QAM Integer32,
xfRFMaxOutputPowerNotLimited Integer32,
xfRFMaxOutputPowerNotPossible INTEGER,
xfRFCurrentInputPowerSdcMain Integer32,
xfRFCurrentInputPowerSdcDiv Integer32,
xfRFMeanInputPower1m Integer32,
xfRFMaxOutputPowerLast7Days Integer32,
xfRFMinOutputPowerLast7Days Integer32,
xfRFMaxOutputPowerSinceReset Integer32,
xfRFMinOutputPowerSinceReset Integer32,
xfRFMaxMSELast7Days Integer32,
xfRFMinMSELast7Days Integer32,
xfRFMaxXPILast7Days Integer32,
xfRFMinXPILast7Days Integer32,
xfRFOutputPowerReset INTEGER,
xfRFBoosterGain Integer32,
xfRFBoosterMaxInputPower Integer32,
xfRFBoosterCapability BoosterCapability,
xfRFBoosterProductNumber DisplayString,
xfRFBoosterHWRevision DisplayString
}
--
-- xfRFPowerTable MOs
--
xfRFCurrentOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the output power in dBm including attenuator.
"
::= { xfRFPowerEntry 1 }
xfRFRtpcMinOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the minimum output power in dBm including attenuator.
Value -100 indicate that RAU Tx on is not possible due to power supply limitations.
"
::= { xfRFPowerEntry 2 }
xfRFRtpcMaxOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the maximum output power in dBm including attenuator.
Value -100 indicate that RAU Tx on is not possible due to power supply limitations.
"
::= { xfRFPowerEntry 3 }
xfRFRtpcSelectedOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object set/shows the selected output power in dBm including attenuator.
Value 254 indicates that the selected power is set to maximum.
Default value: 254
"
::= { xfRFPowerEntry 4 }
xfRFAtpcMinOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the minimum output power in dBm in ATPC.
mode for radio contained in the radio terminal.
"
::= { xfRFPowerEntry 5 }
xfRFAtpcMaxOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets/shows the ATPC maximum output power in dBm for radio contained in the radio terminal.
Value 254 indicates that the power is set to maximum.
Default value: 254.
"
::= { xfRFPowerEntry 6 }
xfRFAtpcMinInputPowerFar OBJECT-TYPE
SYNTAX Integer32 (-99..-30|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the ATPC minimum input target power level for far end radio.
"
::= { xfRFPowerEntry 7 }
xfRFAtpcSelectedInputPowerFar OBJECT-TYPE
SYNTAX Integer32 (-99..-30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets/shows the ATPC selected input target level for far end radio.
Default value: -30.
"
::= { xfRFPowerEntry 8 }
xfRFAttenuator OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets/shows the value in dBm for fixed attenuator mounted in antenna.
Default value: 0.
"
::= { xfRFPowerEntry 9 }
xfRFCurrentInputPower OBJECT-TYPE
SYNTAX Integer32 (-999..-200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input level = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
"
::= { xfRFPowerEntry 10 }
xfRFMaxInputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF input level last 7 days.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates invalid value.
"
::= { xfRFPowerEntry 11 }
xfRFMinInputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF input level last 7 days.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates invalid value.
"
::= { xfRFPowerEntry 12 }
xfRFMaxInputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-999..-200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF input level since reset.
RF input level = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
"
::= { xfRFPowerEntry 13 }
xfRFMinInputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-999..-200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF input level since reset.
RF input level = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
"
::= { xfRFPowerEntry 14 }
xfRFInputPowerReset OBJECT-TYPE
SYNTAX INTEGER
{
inputPowerReset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object reset the registers for the RF input level
and All Time High level this seven days period and
counters for the next seven days period of time
Note. For protected rlMLE and rlXfMLE terminals this
command will reset both Ra1 and Ra2 values.
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRFPowerEntry 15 }
xfRFInputAlarmThreshold OBJECT-TYPE
SYNTAX Integer32 (-99..-30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object shows RF input level threshold.
Default value: -93.
"
::= { xfRFPowerEntry 16 }
xfRFOutputPower4QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 4QAM."
::= { xfRFPowerEntry 17 }
xfRFOutputPower8QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 8QAM."
::= { xfRFPowerEntry 18 }
xfRFOutputPower16QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 16QAM."
::= { xfRFPowerEntry 19 }
xfRFOutputPower32QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 32QAM."
::= { xfRFPowerEntry 20 }
xfRFOutputPower64QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 64QAM."
::= { xfRFPowerEntry 21 }
xfRFOutputPower128QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 128QAM."
::= { xfRFPowerEntry 22 }
xfRFOutputPower256QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 256QAM."
::= { xfRFPowerEntry 23 }
xfRFOutputPower512QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 512QAM."
::= { xfRFPowerEntry 24 }
xfRFAtpcFallbackOutputPower OBJECT-TYPE
SYNTAX Integer32 (-100..45|254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets maximum output power in dBm in ATPCFallback
mode for radio contained in the radio terminal.
Value = 254 indicates that the power is set to maximum.
Default value: 254.
"
::= { xfRFPowerEntry 25 }
xfRFAtpcFallbackEnable OBJECT-TYPE
SYNTAX ATPCFallbackEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable ATPCFallback."
::= { xfRFPowerEntry 26 }
xfRFAtpcFallbackTimer OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ATPC Fallback Timer specifies how long
the output power can be at PATPC, MAX before
ATPC fallback is triggered
Default value: 15 min"
::= { xfRFPowerEntry 27 }
xfRFOutputPower1024QAM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 1024QAM."
::= { xfRFPowerEntry 28 }
xfRFMaxOutputPowerNotLimited OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max output power in dBm including
attenuator that the RAU can give if it is
not power supply limited."
::= { xfRFPowerEntry 29 }
xfRFMaxOutputPowerNotPossible OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
isPossible(1),
isNotPossible(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
unknown(0)
isPossible(1) Max output power is possible due
to power supply limitations
isNotPossible(2) Max output power is not possible
due to power supply limitations
"
::= { xfRFPowerEntry 30 }
xfRFCurrentInputPowerSdcMain OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input level for SDC Main path = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
0 (zero) indicates invalid value (e.g. SDC not available).
"
::= { xfRFPowerEntry 31 }
xfRFCurrentInputPowerSdcDiv OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input level for SDC Diversity path = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
0 (zero) indicates invalid value (e.g. SDC not available).
"
::= { xfRFPowerEntry 32 }
xfRFMeanInputPower1m OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input mean level for last minute.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
"
::= { xfRFPowerEntry 33 }
xfRFMaxOutputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF output level last 7 days.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRFPowerEntry 34 }
xfRFMinOutputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF output level last 7 days.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRFPowerEntry 35 }
xfRFMaxOutputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF output level since reset
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRFPowerEntry 36 }
xfRFMinOutputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF output level since reset
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRFPowerEntry 37 }
xfRFMaxMSELast7Days OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level last 7 days.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
"
::= { xfRFPowerEntry 38 }
xfRFMinMSELast7Days OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level last 7 days.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
"
::= { xfRFPowerEntry 39 }
xfRFMaxXPILast7Days OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level last 7 days.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
"
::= { xfRFPowerEntry 40 }
xfRFMinXPILast7Days OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level last 7 days.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
"
::= { xfRFPowerEntry 41 }
xfRFOutputPowerReset OBJECT-TYPE
SYNTAX INTEGER { outputPowerReset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object reset the registers for the RF output level
and All Time High level this seven days period and
counters for the next seven days period of time.
"
::= { xfRFPowerEntry 42 }
xfRFBoosterGain OBJECT-TYPE
SYNTAX Integer32 ( 0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Value of the Gain of the Booster
"
::= { xfRFPowerEntry 43 }
xfRFBoosterMaxInputPower OBJECT-TYPE
SYNTAX Integer32 (-100..35|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Value of the Max Input Power admitted towards the Booster
"
::= { xfRFPowerEntry 44 }
xfRFBoosterCapability OBJECT-TYPE
SYNTAX BoosterCapability
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Value of Booster capability according to the system
"
::= { xfRFPowerEntry 45 }
xfRFBoosterProductNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Product Number of the Booster connected to the specific RF IF
"
::= { xfRFPowerEntry 46 }
xfRFBoosterHWRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
HW Revision of the Booster connected to the specific RF IF
"
::= { xfRFPowerEntry 47 }
------------------------------------------------------------------------------
-- xfRAUCapabilityTable
------------------------------------------------------------------------------
xfRAUCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRAUCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for RAU capability information.
Table indexed with entPhysicalIndex and xfTermRowIndex.
"
::= { xfRadioLinkPtpRadioObjects 4 }
xfRAUCapabilityEntry OBJECT-TYPE
SYNTAX XfRAUCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in xfRAUCapabilityTable."
INDEX { entPhysicalIndex, xfTermRowIndex }
::= { xfRAUCapabilityTable 1 }
XfRAUCapabilityEntry ::=
SEQUENCE
{
xfRAUChannelSpacing RAUChannelSpacingCapability,
xfRAUChannelModulation RAUModulation,
xfRAUSpectrumEfficiencyClass RauSec,
xfRAUCarrierMode INTEGER
}
--
-- xfRAUCapabilityTable MOs
--
xfRAUChannelSpacing OBJECT-TYPE
SYNTAX RAUChannelSpacingCapability
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel spacing.
ETSI: 3.5, 7, 14, 28, 40, 56 MHz
ANSI: 10, 20, 30, 40, 50 MHz
"
::= { xfRAUCapabilityEntry 1 }
xfRAUChannelModulation OBJECT-TYPE
SYNTAX RAUModulation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the modulation.
Values:
cqpsk(2) CQPSK
qam16(3) 16-QAM
qam128(4) 128-QAM
qam32(5) 32-QAM
qam64(6) 64-QAM
qam4(7) 4-QAM
qam8(8) 8-QAM
qam256(9) 256-QAM
qam512(10) 512-QAM
qam1024(11) 1024-QAM
"
::= { xfRAUCapabilityEntry 2 }
xfRAUSpectrumEfficiencyClass OBJECT-TYPE
SYNTAX RauSec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spectrum Efficiency Class:
other(1), unknown
sec2(2), Spectrum eff. Class 2
sec3(3), Spectrum eff. Class 3
sec4L(4), Spectrum eff. Class 4L
sec4H(5), Specturm eff. Class 4H
sec5A(6), Spectrum eff. Class 5A
sec5B(7), Spectrum eff. Class 5B
sec6A(8), Spectrum eff. Class 6A
sec6B(9) Spectrum eff. Class 6B
"
::= { xfRAUCapabilityEntry 3 }
xfRAUCarrierMode OBJECT-TYPE
SYNTAX INTEGER
{
singleCarrier(1),
xpicDualCarrier(2),
mimoMultiCarrier(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Radio carrier mode.
"
::= { xfRAUCapabilityEntry 4 }
------------------------------------------------------------------------------
-- xfRAUSubBandTable
------------------------------------------------------------------------------
xfRAUSubBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRAUSubBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for RAU Sub-Band index capability.
Table indexed with entPhysicalIndex and xfRAUSubBandIndex.
"
::= { xfRadioLinkPtpRadioObjects 5 }
xfRAUSubBandEntry OBJECT-TYPE
SYNTAX XfRAUSubBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in xfRAUSubBandTable."
INDEX { entPhysicalIndex, xfRAUSubBandIndex }
::= { xfRAUSubBandTable 1 }
XfRAUSubBandEntry ::=
SEQUENCE
{
xfRAUSubBandIndex Unsigned32,
xfRAUSubBandRange Unsigned32
}
--
-- xfRAUSubBandTable MOs
--
xfRAUSubBandIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index for the specific RAU Sub-Band available index range."
::= { xfRAUSubBandEntry 1 }
xfRAUSubBandRange OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the RAU Sub-Band available index range [0..255]."
::= { xfRAUSubBandEntry 2 }
------------------------------------------------------------------------------
-- xfRFSpectrumDiagTable
------------------------------------------------------------------------------
xfRFSpectrumDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRFSpectrumDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for RF Spectrum Diagnostics control and status"
::= { xfRadioLinkPtpRadioObjects 6 }
xfRFSpectrumDiagEntry OBJECT-TYPE
SYNTAX XfRFSpectrumDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in xfRFSpectrumDiagTable"
INDEX { ifIndex }
::= { xfRFSpectrumDiagTable 1 }
XfRFSpectrumDiagEntry ::=
SEQUENCE
{
xfRFSpectrumDiagAdminStatus INTEGER,
xfRFSpectrumDiagOperStatus INTEGER,
xfRFSpectrumDiagChannelScanEstTime Unsigned32,
xfRFSpectrumDiagSubBandScanEstTime Unsigned32,
xfRFSpectrumDiagScanDate DisplayString,
xfRFSpectrumDiagChannelSpacing Unsigned32,
xfRFSpectrumDiagCurrRxFrequency Unsigned32,
xfRFSpectrumDiagMinRxFrequency Unsigned32,
xfRFSpectrumDiagMaxRxFrequency Unsigned32,
xfRFSpectrumDiagIdxCompanion1 Unsigned32,
xfRFSpectrumDiagIdxCompanion2 Unsigned32,
xfRFSpectrumDiagIdxCompanion3 Unsigned32,
xfRFSpectrumDiagProgress Unsigned32
}
--
-- xfRFSpectrumDiagTable MOs
--
xfRFSpectrumDiagAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
channelScanStart(2),
subBandScanStart(3),
scanStop(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF Spectrum Diagnostics Admin Status"
::= { xfRFSpectrumDiagEntry 1 }
xfRFSpectrumDiagOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
scanNotStarted(0),
subBandScanOngoing(1),
channelScanOngoing(2),
scanCanceled(3),
subBandScanFinished(4),
channelScanFinished(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF Spectrum Diagnostics Oper Status"
::= { xfRFSpectrumDiagEntry 2 }
xfRFSpectrumDiagChannelScanEstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated time in seconds for scanning one
Channel Spacing at current RX frequency"
::= { xfRFSpectrumDiagEntry 3 }
xfRFSpectrumDiagSubBandScanEstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated time in seconds for scanning
full Sub Band of connected RAU"
::= { xfRFSpectrumDiagEntry 4 }
xfRFSpectrumDiagScanDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time when scan (channel or sub-band) is completed,
format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss]"
::= { xfRFSpectrumDiagEntry 5 }
xfRFSpectrumDiagChannelSpacing OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel width measured by Spectrum Diagnostics"
::= { xfRFSpectrumDiagEntry 6 }
xfRFSpectrumDiagCurrRxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of Rx frequency"
::= { xfRFSpectrumDiagEntry 7 }
xfRFSpectrumDiagMinRxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum sub-band Rx frequency (RAU lower edge)"
::= { xfRFSpectrumDiagEntry 8 }
xfRFSpectrumDiagMaxRxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum sub-band Rx frequency (RAU upper edge)"
::= { xfRFSpectrumDiagEntry 9 }
xfRFSpectrumDiagIdxCompanion1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF IF index for 1st companion carrier (0 if no companion)"
::= { xfRFSpectrumDiagEntry 10 }
xfRFSpectrumDiagIdxCompanion2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF IF index for 2nd companion carrier (0 if no companion)"
::= { xfRFSpectrumDiagEntry 11 }
xfRFSpectrumDiagIdxCompanion3 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF IF index for 3rd companion carrier (0 if no companion)"
::= { xfRFSpectrumDiagEntry 12 }
xfRFSpectrumDiagProgress OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Completed percentage of Spectrum Diagnostics scan"
::= { xfRFSpectrumDiagEntry 13 }
------------------------------------------------------------------------------
-- xfRFSpectrumDiagResultTable
------------------------------------------------------------------------------
xfRFSpectrumDiagResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRFSpectrumDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Spectrum Diagnostics scan results"
::= { xfRadioLinkPtpRadioObjects 7 }
xfRFSpectrumDiagResultEntry OBJECT-TYPE
SYNTAX XfRFSpectrumDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in xfRFSpectrumDiagResultTable"
INDEX { ifIndex, xfRFSpectrumDiagResultIndex }
::= { xfRFSpectrumDiagResultTable 1 }
XfRFSpectrumDiagResultEntry ::=
SEQUENCE
{
xfRFSpectrumDiagResultIndex Unsigned32,
xfRFSpectrumDiagResultRxFrequency Unsigned32,
xfRFSpectrumDiagResultRxPower Integer32
}
--
-- xfRFSpectrumDiagResultTable MOs
--
xfRFSpectrumDiagResultIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spectrum Diagnostics Scan Result Index"
::= { xfRFSpectrumDiagResultEntry 1 }
xfRFSpectrumDiagResultRxFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spectrum Diagnostics Scan Result Rx frequency in kHz"
::= { xfRFSpectrumDiagResultEntry 2 }
xfRFSpectrumDiagResultRxPower OBJECT-TYPE
SYNTAX Integer32 (-999..-200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spectrum Diagnostics Scan Result Rx Power
value/10 dBm
Domain: [-99.9 .. -20.0 dBm]"
::= { xfRFSpectrumDiagResultEntry 3 }
------------------------------------------------------------------------------
-- xfRfIfPowerTable
------------------------------------------------------------------------------
xfRfIfPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRfIfPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radio Link RAU managed objects.
Table indexed with ifIndex.
"
::= { xfRadioLinkPtpRadioObjects 8 }
xfRfIfPowerEntry OBJECT-TYPE
SYNTAX XfRfIfPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRfIfPowerTable."
INDEX { ifIndex }
::= { xfRfIfPowerTable 1 }
XfRfIfPowerEntry ::=
SEQUENCE
{
xfRfSelectedMinOutputPower RfOutputPower,
xfRfSelectedMaxOutputPower RfOutputPower,
xfRfCurrentOutputPower RfOutputPower,
xfRfMinOutputPower RfOutputPower,
xfRfMaxOutputPower RfOutputPower,
xfRfAtpcTargetInputPowerFE Integer32,
xfRfCurrentInputPower RfInputPower,
xfRfMaxInputPowerLast7Days RfInputPower,
xfRfMinInputPowerLast7Days RfInputPower,
xfRfMaxInputPowerSinceReset RfInputPower,
xfRfMinInputPowerSinceReset RfInputPower,
xfRfInputPowerReset INTEGER,
xfRfInputAlarmThreshold Integer32,
xfRfOutputPower4QAM RfOutputPower,
xfRfOutputPower16QAM RfOutputPower,
xfRfOutputPower32QAM RfOutputPower,
xfRfOutputPower64QAM RfOutputPower,
xfRfOutputPower128QAM RfOutputPower,
xfRfOutputPower256QAM RfOutputPower,
xfRfOutputPower512QAM RfOutputPower,
xfRfOutputPower1024QAM RfOutputPower,
xfRfOutputPower2048QAM RfOutputPower,
xfRfOutputPower4096QAM RfOutputPower,
xfRfMaxOutputPowerNotLimited RfOutputPower,
xfRfMaxOutputPowerPossible INTEGER,
xfRfMeanInputPower1m Integer32,
xfRfMaxOutputPowerLast7Days Integer32,
xfRfMinOutputPowerLast7Days Integer32,
xfRfMaxOutputPowerSinceReset Integer32,
xfRfMinOutputPowerSinceReset Integer32,
xfRfOutputPowerReset INTEGER,
xfRfAvailableOutputPowerType INTEGER,
xfRfSelectedOutputPowerType INTEGER,
xfRfTaps INTEGER,
xfRfCurrentInputPowerSdcMain RfInputPower,
xfRfCurrentInputPowerSdcDiv RfInputPower,
xfRfOutputPower8192QAM RfOutputPower,
xfRfOutputPower16384QAM RfOutputPower,
xfRfAtpcFallbackOutputPower RfOutputPower,
xfRfAtpcFallbackEnable ATPCFallbackEnable,
xfRfAtpcFallbackTimer Integer32
}
--
-- xfRfIfPowerTable MOs
--
xfRfSelectedMinOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Minimum output power in dBm (selected by operator).
Default value: 10 dBm.
"
::= { xfRfIfPowerEntry 1 }
xfRfSelectedMaxOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Maximum output power in dBm (selected by operator).
Default value: 10 dBm.
"
::= { xfRfIfPowerEntry 2 }
xfRfCurrentOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current output power in dBm.
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 3 }
xfRfMinOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Minimum output power in dBm (provided by RAU).
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 4 }
xfRfMaxOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Maximum output power in dBm (provided by RAU).
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 5 }
xfRfAtpcTargetInputPowerFE OBJECT-TYPE
SYNTAX Integer32 (-99..-30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
ATPC target input power on Far End side.
Default value: -30.
"
::= { xfRfIfPowerEntry 6 }
xfRfCurrentInputPower OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
RF input level.
Value is in 1/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
"
::= { xfRfIfPowerEntry 7 }
xfRfMaxInputPowerLast7Days OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Maximum RF input level in the last 7 days.
Value is in 1/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates an invalid value.
"
::= { xfRfIfPowerEntry 8 }
xfRfMinInputPowerLast7Days OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Minimum RF input level in the last 7 days.
Value is in 1/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates an invalid value.
"
::= { xfRfIfPowerEntry 9 }
xfRfMaxInputPowerSinceReset OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Maximum RF input level since reset.
Value is in 1/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates an invalid value.
"
::= { xfRfIfPowerEntry 10 }
xfRfMinInputPowerSinceReset OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Minimum RF input level since reset.
Value is in 1/10 dBm.
Domain: [-99.9 ... -20.0 dBm].
0 (zero) indicates an invalid value.
"
::= { xfRfIfPowerEntry 11 }
xfRfInputPowerReset OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
inputPowerNoReset(2),
inputPowerReset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object resets the registers for:
- RF input power levels
- input levels (i.e. RF power, MSE and XPI) in the next 7 days period of time.
"
::= { xfRfIfPowerEntry 12 }
xfRfInputAlarmThreshold OBJECT-TYPE
SYNTAX Integer32 (-99..-30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
RF input level threshold.
Default value: -93.
"
::= { xfRfIfPowerEntry 13 }
xfRfOutputPower4QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 4QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 14 }
xfRfOutputPower16QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 16QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 15 }
xfRfOutputPower32QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 32QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 16 }
xfRfOutputPower64QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 64QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 17 }
xfRfOutputPower128QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 128QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 18 }
xfRfOutputPower256QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 256QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 19 }
xfRfOutputPower512QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 512QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 20 }
xfRfOutputPower1024QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 1024QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 21 }
xfRfOutputPower2048QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 2048QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 22 }
xfRfOutputPower4096QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 4096QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 23 }
xfRfMaxOutputPowerNotLimited OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Max output power in dBm that the RAU can give
if it is not power supply limited.
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 24 }
xfRfMaxOutputPowerPossible OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
possible(2),
notPossible(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
possible(2): max output power is possible.
notPossible(3): max output power is not possible, due to power supply limitations.
"
::= { xfRfIfPowerEntry 25 }
xfRfMeanInputPower1m OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input mean level for last minute.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
"
::= { xfRfIfPowerEntry 26 }
xfRfMaxOutputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF output level last 7 days.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 27 }
xfRfMinOutputPowerLast7Days OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF output level last 7 days.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 28 }
xfRfMaxOutputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows maximum RF output level since reset
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 29 }
xfRfMinOutputPowerSinceReset OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows minimum RF output level since reset
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
"
::= { xfRfIfPowerEntry 30 }
xfRfOutputPowerReset OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
outputPowerNoReset(2),
outputPowerReset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object reset the registers for the RF output level
and All Time High level this seven days period and
counters for the next seven days period of time.
"
::= { xfRfIfPowerEntry 31 }
xfRfAvailableOutputPowerType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
standardPower(2),
highPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object reports the output power capability of the RAU:
- standardPower
- highPower
"
::= { xfRfIfPowerEntry 32 }
xfRfSelectedOutputPowerType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
standardPower(2),
highPower(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object allows setting the output power type:
- standardPower
- highPower
default: standardPower(2)
When the type is set to highPower(3) a HP license key is required.
If the license key is not present the capacity is limited to Basic Capacity.
The output power can be configured as 'normal' without any impact from the HP license key (present or not).
When the mode is standardPower(2) the availableMaxOutputPower is limited to 'max power' - 4 dB per modulation.
"
::= { xfRfIfPowerEntry 33 }
xfRfTaps OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
enabled(2),
disabled(3),
notAvailable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object allows setting the Traffic Aware Power Saving.
Default: disabled(3)
"
::= { xfRfIfPowerEntry 34 }
xfRfCurrentInputPowerSdcMain OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input level for SDC Main path = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
0 (zero) indicates invalid value (e.g. SDC not available).
"
::= { xfRfIfPowerEntry 35 }
xfRfCurrentInputPowerSdcDiv OBJECT-TYPE
SYNTAX RfInputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RF input level for SDC Diversity path = value/10 dBm.
Domain: [-20.0 .. -99.9 dBm].
0 (zero) indicates invalid value (e.g. SDC not available).
"
::= { xfRfIfPowerEntry 36 }
xfRfOutputPower8192QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 8192QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 37 }
xfRfOutputPower16384QAM OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power for 16384QAM.
255 indicates invalid value."
::= { xfRfIfPowerEntry 38 }
xfRfAtpcFallbackOutputPower OBJECT-TYPE
SYNTAX RfOutputPower
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets output power (in dBm) in ATPCFallback mode,
for radio contained in the Carrier Termination.
255 indicates invalid value."
::= { xfRfIfPowerEntry 39 }
xfRfAtpcFallbackEnable OBJECT-TYPE
SYNTAX ATPCFallbackEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable ATPCFallback."
::= { xfRfIfPowerEntry 40 }
xfRfAtpcFallbackTimer OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how long the output power
can be at (ATPC, MAX) before ATPC fallback is triggered.
Default value: ETSI 15 min, ANSI 5 min."
::= { xfRfIfPowerEntry 41 }
------------------------------------------------------------------------------
-- xfRFIFCableMonitoringTable
------------------------------------------------------------------------------
xfRFIFCableMonitoringTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRFIFCableMonitoringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-point radios RF IF Cable Monitoring managed objects.
Table indexed with ifIndex.
"
::= { xfRadioLinkPtpRadioObjects 9 }
xfRFIFCableMonitoringEntry OBJECT-TYPE
SYNTAX XfRFIFCableMonitoringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRFIFCableMonitoringTable."
INDEX { ifIndex }
::= { xfRFIFCableMonitoringTable 1 }
XfRFIFCableMonitoringEntry ::=
SEQUENCE
{
xfRFIFCMStatus INTEGER,
xfRFOutlierAgc INTEGER,
xfRFOutlierSetTh Unsigned32,
xfRFOutlierCeaseTh Unsigned32,
xfRFRangeAgc INTEGER,
xfRFRangeSetTh Unsigned32,
xfRFRangeCeaseTh Unsigned32,
xfRFStddevAgc INTEGER,
xfRFStddevSetTh Unsigned32,
xfRFStddevCeaseTh Unsigned32,
xfRFDegradationAgc INTEGER,
xfRFDegradationSetTh Unsigned32,
xfRFDegradationCeaseTh Unsigned32,
xfRFMarginAgc INTEGER,
xfRFMarginSetTh Unsigned32,
xfRFMarginCeaseTh Unsigned32,
xfRFOutlierValue Integer32,
xfRFRangeValue Integer32,
xfRFStddevValue Integer32,
xfRFDegradationValue Integer32,
xfRFMarginValue Integer32,
xfRFOutlierTrigger INTEGER,
xfRFRangeTrigger INTEGER,
xfRFStddevTrigger INTEGER,
xfRFDegradationTrigger INTEGER,
xfRFMarginTrigger INTEGER
}
--
-- xfRFIFCableMonitoringTable MOs
--
xfRFIFCMStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Monitoring Status.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 1 }
xfRFOutlierAgc OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Outlier Alarm.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 2 }
xfRFOutlierSetTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Set Threshold for Outlier Alarm.
3 = Default value (0.3).
- To calculate threshold use the following formula: SetTh/10.
Default value: 3
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 3 }
xfRFOutlierCeaseTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Cease Threshold for Outlier Alarm.
2 = Default value (0.2).
- To calculate threshold use the following formula: SetTh/10.
Default value: 2
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 4 }
xfRFRangeAgc OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Range Alarm.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 5 }
xfRFRangeSetTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Set Threshold for Range Alarm.
30 = Default value (3).
- To calculate threshold use the following formula: SetTh/10.
Default value: 30 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 6 }
xfRFRangeCeaseTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Cease Threshold for Range Alarm.
20 = Default value (2).
- To calculate threshold use the following formula: SetTh/10.
Default value: 20 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 7 }
xfRFStddevAgc OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Stddev Alarm.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 8 }
xfRFStddevSetTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Set Threshold for Stddev Alarm.
50 = Default value (5).
- To calculate threshold use the following formula: SetTh/10.
Default value: 50 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 9 }
xfRFStddevCeaseTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Cease Threshold for Stddev Alarm.
20 = Default value (2).
- To calculate threshold use the following formula: SetTh/10.
Default value: 20 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 10 }
xfRFDegradationAgc OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Degradation Alarm.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 11 }
xfRFDegradationSetTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Set Threshold for Degradation Alarm.
2 = Default value (0.2).
- To calculate threshold use the following formula: SetTh/10.
Default value: 2 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 12 }
xfRFDegradationCeaseTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Cease Threshold for Degradation Alarm.
1 = Default value (0.1).
- To calculate threshold use the following formula: SetTh/10.
Default value: 1 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 13 }
xfRFMarginAgc OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object manage IfCable Margin Alarm.
Default value: disable(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 14 }
xfRFMarginSetTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Set Threshold for Margin Alarm.
30 = Default value (3).
- To calculate threshold use the following formula: SetTh/10.
Default value: 30 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 15 }
xfRFMarginCeaseTh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object handles Cease Threshold for Margin Alarm.
60 = Default value (6).
- To calculate threshold use the following formula: SetTh/10.
Default value: 60 (dB/10)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 16 }
xfRFOutlierValue OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object handles the value calculated on 24h for Outlier Alarm.
0 = Default value (0).
- To calculate value use the following formula: Value/100.
Default value: 0
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 17 }
xfRFRangeValue OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object handles the value calculated on 24h for Range Alarm.
0 = Default value (0).
- To calculate value use the following formula: Value/100.
Default value: 0 (dB/100)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 18 }
xfRFStddevValue OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object handles the value calculated on 24h for Stddev Alarm.
0 = Default value (0).
- To calculate value use the following formula: Value/100.
Default value: 0 (dB/100)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 19 }
xfRFDegradationValue OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object handles the value calculated on 24h for Degradation Alarm.
0 = Default value (0).
- To calculate value use the following formula: Value/100.
Default value: 0 (dB/100)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 20 }
xfRFMarginValue OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object handles the value calculated on 24h for Margin Alarm.
0 = Default value (0).
- To calculate value use the following formula: Value/100.
Default value: 0 (dB/100)
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 21 }
xfRFOutlierTrigger OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noSetThreshold(2),
setThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object manage IfCable Outlier Trigger.
Default value: noSetThreshold(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 22 }
xfRFRangeTrigger OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noSetThreshold(2),
setThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object manage IfCable Range Trigger.
Default value: noSetThreshold(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 23 }
xfRFStddevTrigger OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noSetThreshold(2),
setThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object manage IfCable Stddev Trigger.
Default value: noSetThreshold(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 24 }
xfRFDegradationTrigger OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noSetThreshold(2),
setThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object manage IfCable Degradation Trigger.
Default value: noSetThreshold(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 25 }
xfRFMarginTrigger OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noSetThreshold(2),
setThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object manage IfCable Margin Trigger.
Default value: noSetThreshold(2).
Near end access: read-write.
Far end access: no access.
"
::= { xfRFIFCableMonitoringEntry 26 }
------------------------------------------------------------------------------
-- xfSdcTable
------------------------------------------------------------------------------
xfSdcTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfSdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for SDC capabilities, setting and status."
::= { xfRadioLinkPtpRadioObjects 10 }
xfSdcEntry OBJECT-TYPE
SYNTAX XfSdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfSdcTable."
INDEX { entPhysicalIndex }
::= { xfSdcTable 1 }
XfSdcEntry ::=
SEQUENCE
{
xfSdcCapability INTEGER,
xfSdcAdminStatus INTEGER,
xfSdcOperStatus INTEGER,
xfSdcDadeControl INTEGER,
xfSdcDadeStatus INTEGER,
xfSdcPath INTEGER,
xfSdcOduDateTimeCalibration DisplayString,
xfSdcOduSerialNumber DisplayString,
xfSdcGain Integer32,
xfSdcActualPath INTEGER,
xfSdcDadeDelay Integer32
}
--
-- xfSdcTable MOs
--
xfSdcCapability OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcSupported(2),
sdcNotSupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDC capability, including both MMU and ODU."
::= { xfSdcEntry 1 }
xfSdcAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcEnabled(2),
sdcDisabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SDC Admin Status."
::= { xfSdcEntry 2 }
xfSdcOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcEnabled(2),
sdcDisabled(3),
sdcInProgress(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDC Oper Status."
::= { xfSdcEntry 3 }
xfSdcDadeControl OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcDadeStart(2),
sdcDadeAbort(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SDC DADE procedure control."
::= { xfSdcEntry 4 }
xfSdcDadeStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcCalibrated(2),
sdcNotCalibrated(3),
sdcCalInProgress(4),
sdcCalMismatch(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDC DADE procedure status."
::= { xfSdcEntry 5 }
xfSdcPath OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcAuto(2),
sdcMain(3),
sdcDiv(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SDC selected path (desired value)."
::= { xfSdcEntry 6 }
xfSdcOduDateTimeCalibration OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time of the SDC DADE calibration for the ODU with serial number in xfSdcOduSerialNumber.
Format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss] (ISO 8601)."
::= { xfSdcEntry 7 }
xfSdcOduSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of the ODU the current value of xfSdcOduDateTimeCalibration is referred to."
::= { xfSdcEntry 8 }
xfSdcGain OBJECT-TYPE
SYNTAX Integer32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SDC gain in dB/10.
Domain: [0.0 .. 3.0 dB].
"
::= { xfSdcEntry 9 }
xfSdcActualPath OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sdcAuto(2),
sdcMain(3),
sdcDiv(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDC actual path (current value)."
::= { xfSdcEntry 10 }
xfSdcDadeDelay OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
DADE delay in nsec.
"
::= { xfSdcEntry 11 }
--
-- Conformance
--
xfRadioLinkPtpRadioCompliances OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioConformance 1 }
xfRadioLinkPtpRadioGroups OBJECT IDENTIFIER ::= { xfRadioLinkPtpRadioConformance 2 }
xfRADIOLINKPTPRADIOFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement everything."
MODULE -- This Module
MANDATORY-GROUPS { xfRadioLinkPtpRadioCompleteGroup }
::= { xfRadioLinkPtpRadioCompliances 1 }
xfRadioLinkPtpRadioCompleteGroup OBJECT-GROUP
OBJECTS
{
xfRAUAlarmStatus,
xfRAURfLoopAvailable,
xfRAUAtpcCapability,
xfRAULocalCtrlCapability,
xfRAUModCapability,
xfRAUFrequencyband,
xfRAUSubBand,
xfRAUTemperature,
xfRAUProtectionPath,
xfRAURxCapability,
xfRAUNotes,
xfRauAtpcVersion,
xfRauBoosterCapability,
xfRauBoosterSelectedIndex,
xfRFBaseTxFrequency,
xfRFBaseRxFrequency,
xfRFStepSize,
xfRFStepLimitLow,
xfRFStepLimitHigh,
xfRFCurrentStepNumber,
xfRFTxOperStatus,
xfRFTxAdminStatus,
xfRFLoopEnable,
xfRFAlarms,
xfRFStatus,
xfRFStepSizeRx,
xfRFStepLimitLowRx,
xfRFStepLimitHighRx,
xfRFCurrentStepNumberRx,
xfRFDuplexType,
xfRFDuplexConfig,
xfRFDuplexDistance,
xfRFCurrentOutputPower,
xfRFRtpcMinOutputPower,
xfRFRtpcMaxOutputPower,
xfRFRtpcSelectedOutputPower,
xfRFAtpcMinOutputPower,
xfRFAtpcMaxOutputPower,
xfRFAtpcMinInputPowerFar,
xfRFAtpcSelectedInputPowerFar,
xfRFAttenuator,
xfRFCurrentInputPower,
xfRFMaxInputPowerLast7Days,
xfRFMinInputPowerLast7Days,
xfRFMaxInputPowerSinceReset,
xfRFMinInputPowerSinceReset,
xfRFInputPowerReset,
xfRFInputAlarmThreshold,
xfRAUChannelSpacing,
xfRAUChannelModulation,
xfRAUSpectrumEfficiencyClass,
xfRAUCarrierMode,
xfRFOutputPower4QAM,
xfRFOutputPower8QAM,
xfRFOutputPower16QAM,
xfRFOutputPower32QAM,
xfRFOutputPower64QAM,
xfRFOutputPower128QAM,
xfRFOutputPower256QAM,
xfRFOutputPower512QAM,
xfRFAtpcFallbackOutputPower,
xfRFAtpcFallbackEnable,
xfRFAtpcFallbackTimer,
xfRFOutputPower1024QAM,
xfRFMaxOutputPowerNotLimited,
xfRFMaxOutputPowerNotPossible,
xfRFCurrentInputPowerSdcMain,
xfRFCurrentInputPowerSdcDiv,
xfRAUSubBandIndex,
xfRAUSubBandRange,
xfRFMeanInputPower1m,
xfRFMaxOutputPowerLast7Days,
xfRFMinOutputPowerLast7Days,
xfRFMaxOutputPowerSinceReset,
xfRFMinOutputPowerSinceReset,
xfRFMaxMSELast7Days,
xfRFMinMSELast7Days,
xfRFMaxXPILast7Days,
xfRFMinXPILast7Days,
xfRFOutputPowerReset,
xfRfAvailableOutputPowerType,
xfRfSelectedOutputPowerType,
xfRfTaps,
xfRfSelectedMinOutputPower,
xfRfSelectedMaxOutputPower,
xfRfCurrentOutputPower,
xfRfMinOutputPower,
xfRfMaxOutputPower,
xfRfAtpcTargetInputPowerFE,
xfRfCurrentInputPower,
xfRfMaxInputPowerLast7Days,
xfRfMinInputPowerLast7Days,
xfRfMaxInputPowerSinceReset,
xfRfMinInputPowerSinceReset,
xfRfInputPowerReset,
xfRfInputAlarmThreshold,
xfRfOutputPower4QAM,
xfRfOutputPower16QAM,
xfRfOutputPower32QAM,
xfRfOutputPower64QAM,
xfRfOutputPower128QAM,
xfRfOutputPower256QAM,
xfRfOutputPower512QAM,
xfRfOutputPower1024QAM,
xfRfOutputPower2048QAM,
xfRfOutputPower4096QAM,
xfRfOutputPower8192QAM,
xfRfOutputPower16384QAM,
xfRfAtpcFallbackOutputPower,
xfRfAtpcFallbackEnable,
xfRfAtpcFallbackTimer,
xfRfMaxOutputPowerNotLimited,
xfRfMaxOutputPowerPossible,
xfRfMeanInputPower1m,
xfRfMaxOutputPowerLast7Days,
xfRfMinOutputPowerLast7Days,
xfRfMaxOutputPowerSinceReset,
xfRfMinOutputPowerSinceReset,
xfRfOutputPowerReset,
xfRFSpectrumDiagAdminStatus,
xfRFSpectrumDiagOperStatus,
xfRFSpectrumDiagChannelScanEstTime,
xfRFSpectrumDiagSubBandScanEstTime,
xfRFSpectrumDiagScanDate,
xfRFSpectrumDiagChannelSpacing,
xfRFSpectrumDiagCurrRxFrequency,
xfRFSpectrumDiagMinRxFrequency,
xfRFSpectrumDiagMaxRxFrequency,
xfRFSpectrumDiagIdxCompanion1,
xfRFSpectrumDiagIdxCompanion2,
xfRFSpectrumDiagIdxCompanion3,
xfRFSpectrumDiagProgress,
xfRFSpectrumDiagResultIndex,
xfRFSpectrumDiagResultRxFrequency,
xfRFSpectrumDiagResultRxPower,
xfRFBoosterGain,
xfRFBoosterMaxInputPower,
xfRFBoosterCapability,
xfRFBoosterProductNumber,
xfRFBoosterHWRevision,
xfRFIFCMStatus,
xfRFOutlierAgc,
xfRFOutlierSetTh,
xfRFOutlierCeaseTh,
xfRFRangeAgc,
xfRFRangeSetTh,
xfRFRangeCeaseTh,
xfRFStddevAgc,
xfRFStddevSetTh,
xfRFStddevCeaseTh,
xfRFDegradationAgc,
xfRFDegradationSetTh,
xfRFDegradationCeaseTh,
xfRFMarginAgc,
xfRFMarginSetTh,
xfRFMarginCeaseTh,
xfRFOutlierValue,
xfRFRangeValue,
xfRFStddevValue,
xfRFDegradationValue,
xfRFMarginValue,
xfRFOutlierTrigger,
xfRFRangeTrigger,
xfRFStddevTrigger,
xfRFDegradationTrigger,
xfRFMarginTrigger,
xfSdcCapability,
xfSdcAdminStatus,
xfSdcOperStatus,
xfSdcDadeControl,
xfSdcDadeStatus,
xfSdcPath,
xfSdcOduDateTimeCalibration,
xfSdcOduSerialNumber,
xfSdcGain,
xfSdcActualPath,
xfSdcDadeDelay,
xfRfCurrentInputPowerSdcMain,
xfRfCurrentInputPowerSdcDiv
}
STATUS current
DESCRIPTION
"A collection of all current objects in this MIB module."
::= { xfRadioLinkPtpRadioGroups 1 }
END
Reference in New Issue Copy Permalink