david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ericsson/XF-RADIOLINK-PTP-TERMINAL-MIB

8207 lines
277 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
XF-RADIOLINK-PTP-TERMINAL-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex
FROM ENTITY-MIB
entLogicalIndex
FROM ENTITY-MIB
ifIndex
FROM IF-MIB
PerfCurrentCount, PerfIntervalCount
FROM PerfHist-TC-MIB
HCPerfCurrentCount
FROM HC-PerfHist-TC-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32, Counter32, Counter64, IpAddress
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
DisplayString
FROM SNMPv2-TC
xfRadioLink
FROM XF-TOP-MIB;
xfRadioLinkPtpTerminalMIB MODULE-IDENTITY
LAST-UPDATED "202003170000Z" -- 17 March 2020
ORGANIZATION
"Ericsson AB"
CONTACT-INFO
"
Ericsson AB
BU Networks
SE-431 84 Molndal
Sweden
"
DESCRIPTION
"
This MIB defines objects on terminal level
for point-to-point Radiolink terminals.
"
REVISION "202003170000Z" -- 17 March 2020
DESCRIPTION
"
Rev PBB13
xfRLPMCurrent15mTable: added the following MOs:
- xfPMCurrent15mESR
- xfPMCurrent15mSESR
- xfPMCurrent15mBBER
xfRLPMCurrent24hTable: added the following MOs:
- xfPMCurrent24hESR
- xfPMCurrent24hSESR
- xfPMCurrent24hBBER
"
REVISION "201912200000Z" -- 20 December 2019
DESCRIPTION
"
Rev PBB12
Increased upper limit from 135 to 145 dBm and default value adjusted for following MOs:
- xfExtRFPMSetThreshold15mTLTM
- xfExtRFPMResetThreshold15mTLTM
- xfExtRFPMSetThreshold24hTLTM
"
REVISION "201911260000Z" -- 26 November 2019
DESCRIPTION
"
Rev PBB11
Increased upper limit from 35 to 45 dBm for following MOs:
- xfExtRFPMTLTS1Threshold
- xfExtRFPMCurrent24hTLMin
- xfExtRFPMCurrent24hTLMax
- xfExtRFPMInterval24hTLMin
- xfExtRFPMInterval24hTLMax
- xfExtRFPMCurrent15mTLMin
- xfExtRFPMCurrent15mTLMax
- xfExtRFPMInterval15mTLMin
- xfExtRFPMInterval15mTLMax
"
REVISION "201805230000Z" -- 23 May 2018
DESCRIPTION
"
Rev PBB10
Revert change of maximum and default values for Extended PM Thresholds
in following tables:
- xfRLExtRFPMConfigTable
- xfRLExtRFPMCurrent24hTable
- xfRLExtRFPMInterval24hTable
- xfRLExtRFPMCurrent15mTable
- xfRLExtRFPMInterval15mTable
"
REVISION "201804270000Z" -- 27 April 2018
DESCRIPTION
"
Rev PBB9
Updated maximum values of xfPMTLTS1Thresholds.
"
REVISION "201804060000Z" -- 6 April 2018
DESCRIPTION
"
Rev PBB8
Updated unit of measurement of XPI level in performance monitoring counters:
from dBm to dB.
"
REVISION "201709190000Z" -- 19 September 2017
DESCRIPTION
"
Rev PBB7
- Type of MOs xfPMCurrent24hBBEs/xfPMInterval24hBBEs and xfPMCurrent24hBBs/xfPMInterval24hBBs
changed to HCPerfCurrentCount.
- Updated description of MO xfPMSetThreshold15mBBEs: 9000 -> 9900.
"
REVISION "201705240000Z" -- 24 May 2017
DESCRIPTION
"
Rev PBB6
Introduction of new FF 60 MHz.
"
REVISION "201610240000Z" -- 24 October 2016
DESCRIPTION
"
Rev PBB5
New objects in xfRLPtpTerminalXTable:
xfTermPacketMaxCapacity and xfTermPacketMinCapacity.
"
REVISION "201605110000Z" -- 11 May 2016
DESCRIPTION
"
Rev PBB4
- 'xfTermSpectrumEfficiencyClassObsolete' MO moved to obsolete conformance group.
"
REVISION "201605100000Z" -- 10 May 2016
DESCRIPTION
"
Rev PBB3
- 'Obsolete' MOs set back to 'current' status
in order to remove warnings.
"
REVISION "201602220000Z" -- 22 February 2016
DESCRIPTION
"
Rev PBB2
- Description updated for some MOs.
- Readability improvements (formatting).
"
REVISION "201602050000Z" -- 5 February 2016
DESCRIPTION
"
Rev PBB1
- Added tables:
* xfRLExtRFPMConfigTable
* xfRLExtRFPMCurrent24hTable
* xfRLExtRFPMInterval24hTable
* xfRLExtRFPMCurrent15mTable
* xfRLExtRFPMInterval15mTable
* xfRLExtRAUPMCurrent24hTable
* xfRLExtRAUPMInterval24hTable
* xfRLExtRAUPMCurrent15mTable
* xfRLExtRAUPMInterval15mTable
- Obsoleted the following MOs in xfRLPMConfigTable:
* xfPMRLTS1Threshold
* xfPMSetThreshold15mRLTS1
* xfPMResetThreshold15mRLTS1
* xfPMRLTS2Threshold
* xfPMSetThreshold15mRLTS2
* xfPMResetThreshold15mRLTS2
* xfPMSetThreshold15mRLTM
* xfPMResetThreshold15mRLTM
* xfPMTLTS1Threshold
* xfPMSetThreshold15mTLTS1
* xfPMResetThreshold15mTLTS1
* xfPMSetThreshold15mTLTM
* xfPMResetThreshold15mTLTM
* xfPMSetThreshold24hRLTS1
* xfPMSetThreshold24hRLTS2
* xfPMSetThreshold24hRLTM
* xfPMSetThreshold24hTLTS1
* xfPMSetThreshold24hTLTM
"
REVISION "201506080000Z" -- 8 June 2015
DESCRIPTION
"
Rev PBA6
Updated description text for the following MOs:
xfPMSetThreshold15mRLTM, xfPMResetThreshold15mRLTM,
xfPMSetThreshold24hRLTM, xfPMSetThreshold15mTLTM,
xfPMResetThreshold15mTLTM, xfPMSetThreshold24hTLTM,
xfPMCurrent24hMSEMin, xfPMCurrent24hMSEMax,
xfPMInterval24hMSEMin, xfPMInterval24hMSEMax,
xfPMCurrent15mMSEMin, xfPMCurrent15mMSEMax,
xfPMInterval15mMSEMin, xfPMInterval15mMSEMax
"
REVISION "201502260000Z" -- 26 February 2015
DESCRIPTION
"
Rev PBA5
Add new MIBs for improved power monitoring
Table xfRLPMConfigTable new MOs:
xfPMRLTS1Threshold, xfPMSetThreshold15mRLTS1,
xfPMResetThreshold15mRLTS1, xfPMRLTS2Threshold,
xfPMSetThreshold15mRLTS2, xfPMResetThreshold15mRLTS2,
xfPMSetThreshold15mRLTM, xfPMResetThreshold15mRLTM,
xfPMTLTS1Threshold, xfPMSetThreshold15mTLTS1,
xfPMResetThreshold15mTLTS1, xfPMSetThreshold15mTLTM,
xfPMResetThreshold15mTLTM, xfPMSetThreshold24hRLTS1,
xfPMSetThreshold24hRLTS2, xfPMSetThreshold24hRLTM,
xfPMSetThreshold24hTLTS1, xfPMSetThreshold24hTLTM
Table xfRLPMCurrent24hTable new MOs:
xfPMCurrent24hRLTS1, xfPMCurrent24hRLTS2,
xfPMCurrent24hRLMin, xfPMCurrent24hRLMax,
xfPMCurrent24hTLTS1, xfPMCurrent24hTLMin,
xfPMCurrent24hTLMax, xfPMCurrent24hMSEMin,
xfPMCurrent24hMSEMax, xfPMCurrent24hXPIMin,
xfPMCurrent24hXPIMax
Table xfRLPMInterval24hTable New MOs:
xfPMInterval24hRLTS1, xfPMInterval24hRLTS2,
xfPMInterval24hRLMin, xfPMInterval24hRLMax,
xfPMInterval24hTLTS1, xfPMInterval24hTLMin,
xfPMInterval24hTLMax, xfPMInterval24hMSEMin,
xfPMInterval24hMSEMax, xfPMInterval24hXPIMin,
xfPMInterval24hXPIMax
Table xfRLPMCurrent15mTable new MOs:
xfPMCurrent15mRLTS1, xfPMCurrent15mRLTS2,
xfPMCurrent15mRLMin, xfPMCurrent15mRLMax,
xfPMCurrent15mTLTS1, xfPMCurrent15mTLMin,
xfPMCurrent15mTLMax, xfPMCurrent15mMSEMin,
xfPMCurrent15mMSEMax, xfPMCurrent15mXPIMin,
xfPMCurrent15mXPIMax
Table xfRLPMInterval15mTable new MOs:
xfPMInterval15mRLTS1, xfPMInterval15mRLTS2,
xfPMInterval15mRLMin, xfPMInterval15mRLMax,
xfPMInterval15mTLTS1, xfPMInterval15mTLMin,
xfPMInterval15mTLMax, xfPMInterval15mMSEMin,
xfPMInterval15mMSEMax, xfPMInterval15mXPIMin,
xfPMInterval15mXPIMax
"
REVISION "201407070000Z" -- 7 July 2014
DESCRIPTION
"
Rev PBA4
Comments adjusted.
"
REVISION "201402200000Z" -- 20 Febuary 2014
DESCRIPTION
"
Rev PBA3
Added SDC Performance tables:
- xfRLPMSDCGainCurrent15mTable
- xfRLPMSDCGainInterval15mTable
- xfRLPMSDCGainCurrent24hTable
- xfRLPMSDCGainInterval24hTable
- xfRLPMSDCGainConfigTable
"
REVISION "201401150000Z" -- 15 January 2014
DESCRIPTION
"
Rev PBA2
xfTermChannelModeCapability object extended with values:
- ccdp16QAM(3)
- ccdp64QAM(4)
- ccdp128QAM(5)
"
REVISION "201311220000Z" -- 22 November 2013
DESCRIPTION
"
Rev PBA1
Minor changes for removal of warnings.
"
REVISION "201311191400Z" -- 19 November 2013
DESCRIPTION
"
Rev AZ
Official R-State for M14A
"
REVISION "201309250000Z" -- 25 September 2013
DESCRIPTION
"Fixed error in xfRLPtpTerminalXTable definition"
REVISION "201309160000Z" -- 16 September 2013
DESCRIPTION
"Remoed objects in xfRLPtpTerminalXTable:
xfTermXpicStatus, xfTermXpiLevel, xfTermMSELevel"
REVISION "201307060000Z" -- 06 July 2013
DESCRIPTION
"New objects in xfRLPtpTerminalXTable:
xfTermXpicStatus, xfTermXpiLevel, xfTermMSELevel"
REVISION "201303280000Z" -- 28 March 2013
DESCRIPTION
"
Rev PAV1
New objects in xfRLPtpTerminalXTable:
xfTermConfiguredBitPipeCapacity and xfTermTribCapacityConfigured"
REVISION "201210260000Z" -- 26 October 2012
DESCRIPTION
"
Rev PAY2
* New values for XfRLPMAMCurrent15mTable: xfPMAMCurrent15m4QAMEnRLB -> xfPMAMCurrent15m1024QAMEnRLB
* New values for xfRLPMAMCurrent24hTable: xfPMAMCurrent24h4QAMEnRLB -> xfPMAMCurrent24h1024QAMEnRLB
* New values for XfRLPMAMInterval15mTable: xfPMAMInterval15m4QAMEnRLB -> xfPMAMInterval15m1024QAMEnRLB
* New values for XfRLPMAMInterval24hTable: xfPMAMInterval24h4QAMEnRLB -> xfPMAMInterval24h1024QAMEnRLB
* New value for xfRLPtpTerminalPerformanceTable: xfTermTimeElapsedEnRLBExt
"
REVISION "201208010000Z" -- 01 August 2012
DESCRIPTION
"
Rev PAF3
* New value for xfTermProtection: enhancedRLB.
* New values of xfRLProtectionMode: enhancedRLBProtected and enhancedRLBExtended.
* New values for xfTermProtectionCapability: nplus1 and enhancedRLB.
"
REVISION "201206240000Z" -- 24 June 2012
DESCRIPTION
"
Rev PAF2
* pdhToTdmAndSDHToSFPHAndSDHToPtP added to xfTermInterfaces
* Adjusted values in xfTermBerAlarmThresholdCapability
"
REVISION "201205290000Z" -- 29 May 2012
DESCRIPTION
"
Rev PAF1
Added xfTermBerAlarmThresholdCapability
"
REVISION "201112160000Z" -- 16 December 2011
DESCRIPTION
"
Rev AE
Changed to full revision
"
REVISION "201112040000Z" -- 04 December 2011
DESCRIPTION
"
Rev PAE3
Change name of mcOneStm1OneDS1LH
to oneStm1OneDS1LH
"
REVISION "201111220000Z" -- 22 November 2011
DESCRIPTION
"
Rev PAE2
New capacity value, mcOneStm1OneDS1LH(26)
New capacity value, mcOneStm1OneDS1LH(25)
to terminalcapacitycapability array
"
REVISION "201111170000Z" -- 17 November 2011
DESCRIPTION
"
Rev PAE1
Added fftAdmodStatic(10), fftXpicAdmodStatic(11),
fftAdmodStaticLH(12) and fftXpicAdmodStaticLH(13)
to xfTermFrameFormatType
"
REVISION "201111150000Z" -- 15 November 2011
DESCRIPTION
"
Rev AD
Updated to an official revision
"
REVISION "201109090000Z" -- 9 Sept 2011
DESCRIPTION
"
Rev PAD4
Added vr150(13), vr250(14), vr300(15),
vr400(16) and vr450(17) license
"
REVISION "201107080000Z" -- 8 July 2011
DESCRIPTION
"
Rev PAD3
New capacity value, oneStm1OneE1LH(24)
to terminalcapacitycapability array
"
REVISION "201106270000Z" -- 27 June 2011
DESCRIPTION
"
Rev PAD2
New capacity value, oneStm1OneE1LH(25)
"
REVISION "201106010000Z" -- 1 June 2011
DESCRIPTION
"
Rev PAD1
Changes for TN 5.0.
New objects in xfRLPtpTerminalXTable:
xfTermFadingRates and xfTermFadingRatesCapability.
"
REVISION "201105230000Z" -- 23 May 2011
DESCRIPTION
"
Rev AC
Official R-state for TN 4.4 FP
"
REVISION "201103040000Z" -- 4 march 2011
DESCRIPTION
"
Rev PAC11
Changes for Mini Link LH 1.0.
Added fftStaticLH(6), fftAdmodLH(7),
fftXpicLH(8) andfftXpicAdmodLH(9)to xfTermFrameFormatType
"
REVISION "201102090000Z" -- 9 February 2011
DESCRIPTION
"
Rev PAC10
Changes for TN 4.4FP.
Added capability-bit terminalCapacityLicense(3) to
MO xfTermCapability in table xfRLPtpTerminalXTable.
"
REVISION "201102010000Z" -- 1 February 2011
DESCRIPTION
"
Rev PAC9
Changes for TN 4.4FP.
Correction for 1024QAM.
"
REVISION "201101100000Z" -- 10 January 2011
DESCRIPTION
"
Rev PAC8
Changes for TN 4.4FP.
Added MO xfTermCapacityLicense to
xfRLPtpTerminalXTable.
Added table xfRLPtpTerminalCapacityLicenseTable
and it's MOs xfTermCapacityLicenseRange
xfTermMaxCapacityRange and xfTermMaxTribCapacityRange
"
REVISION "201012210000Z" -- 21 December 2010
DESCRIPTION
"
Rev PAC7
Changes for TN 4.4FP.
Added capability-bit txSwitchOverConfiguration to
MO xfRLProtectionCapability in table xfRLProtection.
Changed MO name from xfTermAdaptiveCapability to xfTermCapability
and changed the BITS name changing the supports-prefix to a adaptive-prefix
and added fragmentedTributaries.
"
REVISION "201012160000Z" -- 16 December 2010
DESCRIPTION
"
Rev PAC6
Changes for TN 4.4FP.
Changed MO-name from xfRLRemoteTxSwitchOverConfiguration to xfRLTxSwitchOverConfiguration.
"
REVISION "201012140000Z" -- 14 December 2010
DESCRIPTION
"
Rev PAC5
Added Describtion for TermAutoRemoveLoopEnable
Changed name on supportsAtpcFallbackWithAutoRestore
to supportsAtpcFallbackTimer.
Added Describtion for xfTermAdaptiveManualMode
"
REVISION "201012130000Z" -- 13 December 2010
DESCRIPTION
"
Rev PAC4
Changes for TN 4.4FP.
Added 1024QAM.
"
REVISION "201011230000Z" -- 23 November 2010
DESCRIPTION
"
Rev PAC3
Changes for TN 4.4FP.
Added xfRLRemoteTxSwitchOverConfiguration to xfRLProtectionTable.
"
REVISION "201010250000Z" -- 25 October 2010
DESCRIPTION
"
Rev PAC2
Changes for TN 4.4FP.
Added xfTermCapability(22) to
xfRlPtpTerminalXTable and enabledAsRequest(4) to
xfTermAdaptiveManualMode(13)
"
REVISION "201010210000Z" -- 21 October 2010
DESCRIPTION
"
Rev PAC1
Added supportsAtpcFallbackWithAutoRestore to xfTermAtpcCapability.
"
REVISION "201009130000Z" -- 13 September 2010
DESCRIPTION
"
Rev AB
Changes for TN 4.4.
Added xfTermAutoRemoveLoopEnable(21) to
xfRlPtpTerminalXTable.
"
REVISION "201009020000Z" -- 2 September 2010
DESCRIPTION
"
Rev PAB4
Changes for TN 4.4.
Added xfTermTribAllocationActual(19) and xfTermTribAllocationDesired(20) to
xfRlPtpTerminalXTable.
"
REVISION "201008200000Z" -- 20 Augusti 2010
DESCRIPTION
"
Rev PAB3
Changes for TN 4.4.
Added xfRLProtectionCapability(7) to xfRLProtectionTable.
"
REVISION "201006150000Z" -- 15 Juni 2010
DESCRIPTION
"
Rev PAB2
Added UnprotectedSD xfTermProtection and xfRLProtectionTable
Added TermProtectionCapbility and TermLineProtectionCapability
to XfRLPtpTerminalXEntry and xfRadioLinkPtpTerminalCompleteGroup
"
REVISION "201006040000Z" -- 4 Juni 2010
DESCRIPTION
"
Rev PAB
Added rlXfMLTNPT(6) to xfTermType
"
REVISION "201005270000Z" -- 27 Maj 2010
DESCRIPTION
"
Rev AA
Added vr500 license
"
REVISION "201001190000Z" -- 19 January 20010
DESCRIPTION
"
Rev Z
Official R-State for TN 4.3
"
REVISION "200911180000Z" -- 18 november 2009
DESCRIPTION
"
Rev PZ2
Added supportsAtpcFallback to xfTermAtpcCapability.
"
REVISION "200909180000Z" -- 18 september 2009
DESCRIPTION
"
Rev PZ
Added xfTermIpAddress to xfRLPtpTerminalXTable.
"
REVISION "200906260000Z" -- 26 june 2009
DESCRIPTION
"
Rev Y
Updated revision history.
"
REVISION "200906240000Z" -- 24 june 2009
DESCRIPTION
"
Rev Y
Official R-State for TN 4.2
"
REVISION "200904140000Z" -- 14 april 2009
DESCRIPTION
"
Rev PX11
Changes for TN 4.2
Spectrum Effeciency Class index values have changed.
Adde new Spectrum Effeciency Class/Capability values.
Added channelspacing chsp3500kHz(10).
Added validrow vr4(11).
"
REVISION "200903110000Z" -- 11 mars 2009
DESCRIPTION
"
Corrected bit fields for pmamconfig table.
"
REVISION "200903040000Z" -- 4 mars 2009
DESCRIPTION
"
Rev X
This is the same version as Rev PX9, with the changes below:
Changed name on fftAdaptive to fftAdMod.
"
REVISION "200902020000Z" -- 2 feb 2009
DESCRIPTION
"
Rev PX10
Added new tables:
- XfRLPMAMConfigTable
- XfRLPMAMInterval24hTable
- XfRLPMAMInterval15mTable
- XfRLPMAMCurrent24hTable
- XfRLPMAMCurrent15mTable
New type TermAdaptiveManualMode,
changed type xfTermAdaptiveManualMode.
"
REVISION "200901050000Z" -- 5 jan 2009
DESCRIPTION
"
Rev PX9
Fixed double index for xfRLPMInterval15mTable
"
REVISION "200812040000Z" -- 04 december 2008
DESCRIPTION
"
Rev PX8
Changes for TN 4.1/4.2
xfTermBitPipeCapacity description changed from Mbit to Kbit (TR: TTNTR00022525).
"
REVISION "200810020000Z" -- 02 october 2008
DESCRIPTION
"
Rev PX7
Changes for TN 4.1/4.2
Removed objects in xfRLPtpTerminalXTable: xfTermAdaptiveModulation
Changed objects in xfRLPtpTerminalXTable:
- from xfTermManualRowIndex to xfTermAdaptiveManualRowIndex
- from xfTermDCNHCapacity to xfTermDCNCapacity
Fixed double index issue in xfRLPtpTerminalXTable
"
REVISION "200809160000Z" -- 16 september 2008
DESCRIPTION
"
Rev PX6
Changes for TN 4.1
New objects in xfRLPtpTerminalXTable:
- xfTermActualRowIndex
- xfTermMaxRowIndex
- xfTermAdaptiveModulation
- xfTermManualRowIndex
- xfTermAdaptiveManualMode
"
REVISION "200808150000Z" -- 15 august 2008
DESCRIPTION
"
Rev PX5
Added rlXfMLStandalone(5) for xfTermTypes in xfRLPtpTerminalTable.
Fixed wrong values in xfTermFrameFormatRev for xfRlPtpTerminalCapabilityTable.
"
REVISION "200806250000Z" -- 25 june 2008
DESCRIPTION
"
Rev PX4
Changes for TN 4.1
Changes in table: xfRlPtpTerminalCapabilityTable
"
REVISION "200806240000Z" -- 24 june 2008
DESCRIPTION
"
Rev PX3
Changes for TN 4.1
Changes in table: xfRlPtpTerminalCapabilityTable (xfTermChannelModulation)
"
REVISION "200806180000Z" -- 18 june 2008
DESCRIPTION
"
Rev PX2
Changes for TN 4.1
Changes in table: xfRlPtpTerminalCapabilityTable
"
REVISION "200806040000Z" -- 4 june 2008
DESCRIPTION
"
Rev PX1
Changes for TN 4.1
New objects in xfRLPtpTerminalXTable:
xfTermTribCapacityActual
xfTermTribCapacityDesired
xfTermBitPipeCapacity
xfTermRowIndex
New table:
xfRlPtpTerminalCapabilityTable
"
REVISION "200806030000Z" -- 3 june 2008
DESCRIPTION
"
Rev V
Ordinary revision. No other changes.
"
REVISION "200804090000Z" -- 9 april 2008
DESCRIPTION
"
Rev PV5
Changes for TN4.0:
Default value descriptions for xfTermCapacity and xfTermModulation corrected.
"
REVISION "200803030000Z" -- 3 mar 2008
DESCRIPTION
"
Rev PV3/PV4
Changes for TN4.0:
xfTermCapacity and ...Capability extended with two new values: sixtynineDS1 and eightyDS1
xfRLPtpTerminalXTable added - with these MO's:
xfTermInterfaces
xfTermInterfacesCapability
xfTermChannelModeOperStatus (PV4)
xfTermXPICRestore (PV4)
"
REVISION "200710240000Z" -- 24 oct 2007
DESCRIPTION
"
Rev U
Ordinary revision for TN 3.3,
according to 1/155 19-CRH 109 625/1 Uae Rev V
"
REVISION "200708140000Z" -- 14 aug 2007
DESCRIPTION
"
Rev PU4
CR1045: New capacity value, oneStm1OneJ1(22)
"
REVISION "200707050000Z" -- 5 july 2007
DESCRIPTION
"
Rev PU3
Correction: xfPMInterval24hUASs and xfPMInterval24hBBs shall be read-only
"
REVISION "200707030000Z" -- 3 july 2007
DESCRIPTION
"
Rev PU2
New values for xfTermCapacity:
twentytwoE1(18),
thirtyfiveE1(19),
fortysixE1(20),
seventyfiveE1(21)
New values for xfTermCapacityCapability:
twentytwoE1(17),
thirtyfiveE1(18),
fortysixE1(19),
seventyfiveE1(20)
"
REVISION "200707020000Z" -- 2 july 2007
DESCRIPTION
"
Rev PU1
Mib file according to IMPLEMENT. PROPOSAL 6/1594-FCP 101 4733 Uen PB5
New tables:
xfRLPMConfigTable
xfRLPMCurrent24hTable
xfRLPMInterval24hTable
xfRLPMCurrent15mTable
xfRLPMInterval15mTable
"
REVISION "200706040000Z" -- 4 june 2007
DESCRIPTION
"
Rev T
Changes according to 1/15519-CRH109625/1 Uae Rev U.
- xfRLActiveTxRadio: Change in comment regarding relaxed access limitation.
- xfRLSwitchOverReset: Change in comment regarding relaxed access limitation.
"
REVISION "200703160000Z" -- 16 mar 2007
DESCRIPTION
"
Rev S
- xfTermTimeElapsed:
Corrected description field acc. to 1/15519-CRH109625/1 Uae Rev S.
- xfTermDCNRadioCapability:
Corrected literals, dcnLinexxx --> dcnRadioxxx
"
REVISION "200701170000Z" -- 17 jan 2007
DESCRIPTION
"
Rev N
Changes according to 1/15519-CRH109625/1 Uae Rev S
- xfTermCapacity: added value oneStm1oneE1at50MHz(17)
- xfTermCapacityCapability:
stm0(12) --> oneStm0(12)
stm1(13) --> oneStm1oneE1(13)
oneStm1oneDS1(15) added
oneStm1oneE1at50MHz(16) added
- xfTermLineProtection:
singleInterface(3) SI --> singleInterfaceLowSlot(3) SI low slot
--> singleInterfaceHighSlot(4) SI high slot
opticalSplitter(4) EEP --> opticalSplitter(5) EEP
equipmentAndLineProtection(5) ELP --> equipmentAndLineProtection(6) ELP
- xfRLLineProtectionMode:
singleInterface(3) --> singleInterfaceLowSlot(3)
--> singleInterfaceHighSlot(4)
opticalSplitter(4) --> opticalSplitter(5)
equipmentAndLineProtection(5) --> equipmentAndLineProtection(6)
"
REVISION "200611140000Z" -- November 14
DESCRIPTION
"
Rev M
Changes according to 1/15519-CRH109625/1 Uae Rev N
- xfRADIORSTable moved from XF-RADIOLINK-PTP-MODEM-MIB to this mib.
- xfRADIORSPerformanceTable moved from XF-RADIOLINK-PTP-MODEM-MIB to this mib.
"
REVISION "200609200000Z" -- September 20
DESCRIPTION
"
Rev L
Correction: Adding MO xfRLLineProtectionMode, according to
1/15519-CRH109625/1 Uae Rev M
"
REVISION "200609191310Z" -- September 19, 2006 at 13:10 GMT
DESCRIPTION
"
Rev K.
Changed object syntax to improve the display in a mib browser.
Changed description for object xfTermAlarmSeverity according to
errata for 1/15519-CRH109625/1 Uae Rev M
"
REVISION "200609120000Z"
DESCRIPTION
"
Rev PK5.
Changes according to 1/15519-CRH109625/1 Uae Rev PM1
New objects in xfRLPtpTerminalTable
Moved object descriptions to make them visible in a mib browser.
"
REVISION "200609050000Z"
DESCRIPTION
"
Rev PK3.
- Changes according to 1/15519-CRH109625/1 Uae Rev L
- Changed value in xfTermCapacity:
oneStm1(14) --> oneStm1oneE1(14)
- Added value in xfTermCapacity:
oneStm1oneDS1(16)
- Added value in xfTermModulation:
qam64(6)
- Added value for xfTermModulationCapability:
qam64(4)
- Added objects in xfRlPtpTerminalTable to support SDH, license-handling and
frame-format handling:
xfTermChannelMode
xfTermChannelModeCapability
xfTermTrafficAndDCN
xfTermFrameFormat
xfTermFrameFormatCapability
- Changed description regarding relaxed far-end restrictions for these objects:
xfTermId
xfTermProtection
xfTermCapacity
xfTermModulation
xfTermRemoteIdCheck
xfTermRemoteId
xfTermFadeNotificationTimer
- Changed description regarding functionality for the object xfTermRestore.
- Changed description regarding default values for xfTermCapacity and xfTermModulation
"
REVISION "200603200000Z"
DESCRIPTION
"
Rev. J.
- Changes according to 1/15519-CRH109625/1 Uae Rev K
- Addition of Enum values for TermCapacity, TermCapacityCapability,
TermModulation, TermModulationCapability to support ANSI.
"
REVISION "200602240000Z"
DESCRIPTION
"
Rev. H.
- Access restrictions explained in the description field for each MO.
- Default value declarations in the description fields also includes the numerical value.
"
REVISION "200601310000Z"
DESCRIPTION
"
Rev. G.
- xfTermFadeNotificationTimer is read/write again.
- New value for xfRLLineProtectionStatus: rfInputThresholdProtection
- Object name xfEquipmentProtectionTable changed to xfTermEquipmentProtectionIndex
- xfTermSysName(octet string, read-only) added in xfRlPtpTerminalTable
"
REVISION "200503010000Z"
DESCRIPTION
"
Rev. F.
- Changes according to 1/15519-CRH109625/1 Uae Rev E and corrections:
- Enum values defined for xfRLProtectionMode in xfRLProtectionTable.
- MAX-ACCESS for MO xfTermFadeNotificationTimer, in xfRLPtpTerminalTable, corrected to be read-only
- Sequence-numbers for xfRLPtpTerminalPerformanceTable, xfRLProtectionTable and xfRLLineProtectionTable
adjusted to maintain compatibility.
"
REVISION "200412130000Z"
DESCRIPTION
"
Rev. E
- Changes according to 1/15519-CRH109625/1 Uae Rev D and trouble report HF38086 (see below)
- XfRLPtpTerminalEntry changed:
-- xfTermFarEndTxOn removed.
-- xfTermFadeNotificationTimer and xfEquipmentProtectionTable added
- Syntax for xfTermTrapEnable changed.
- xfRLPtpTerminalSwitchIfTable removed
- xfRLProtectionTable added
- xfRLLineProtectionTable added
- xfRadioLinkPtpTerminalCompleteGroup updated according to other changes.
- values for xfRLActiveTxRadio changed according to trouble report HF38086
- DEFVAL removed. Default value info declared in corresponding description fields.
"
REVISION "200407020000Z"
DESCRIPTION
"
Rev. D
- All ConfigAlarms are removed
- xfTermFarEndTxOn MO is added
"
REVISION "200406220000Z"
DESCRIPTION
"
Rev. C
- New coding of xfTermAsPort
"
REVISION "200406160000Z"
DESCRIPTION
"
Rev. B
- All config alarms are defined
- Alarms are updated with new names
- xfTermCurrentBBE now of Counter64 type
"
REVISION "200405250000Z"
DESCRIPTION
"
Rev. PB2
- Some minor changes
"
REVISION "200405171000Z"
DESCRIPTION
"
Rev. PB1
- Contact info updated with new contact person.
- xfTermSynchRemote, xfTermAlarm are removed.
- Management objects for restore, trap, remote Id check,
and preset are added.
- Some attributes in OutputPowerTable moved to RF level.
- xfTermCurrentAT removed.
"
REVISION "200401201000Z"
DESCRIPTION
"
Rev. A This revision has Integer limits added.
New xfTermAsPort object in xfRLPtpTerminalTable
added.
"
REVISION "200312171000Z"
DESCRIPTION
"
Rev. PA1 Initial revision
"
::= { xfRadioLink 1 }
--
-- Textual conventions
--
TermAdaptiveManualMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Adaptive Modulation mode"
SYNTAX INTEGER
{
other(1),
disable(2),
enable(3),
enabledAsRequest(4)
}
TermModulation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Channel Modulation"
SYNTAX INTEGER
{
other(1),
cqpsk(2),
qam16(3),
qam128(4),
qam32(5),
qam64(6),
qam4(7),
qam8(8),
qam256(9),
qam512(10),
qam1024(11)
}
TermOutputPowerStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Output power mode"
SYNTAX INTEGER
{
other(1),
rtpc(2),
atpc(3),
localControl(4),
ra1LocalControlRa2Rtpc(5),
ra1RtpcRa2LocalControl(6)
}
ChannelMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Terminal channel mode"
SYNTAX INTEGER
{
other(1),
ccdp(2),
accp(3),
acap(4)
}
TermRauSec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Spectrum Effeciency Class"
SYNTAX INTEGER
{
other(0),
sec2(1),
sec4(2),
sec5b(3)
}
TermAutoRemoveLoopEnable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Auto Removal loops"
SYNTAX INTEGER
{
other(1),
enable(2),
disable(3)
}
--
-- Node definitions
--
xfRadioLinkPtpTerminalObjects OBJECT IDENTIFIER
::= { xfRadioLinkPtpTerminalMIB 1 }
xfRadioLinkPtpTerminalConformance OBJECT IDENTIFIER
::= { xfRadioLinkPtpTerminalMIB 2 }
------------------------------------------------------------------------------
-- xfRLPtpTerminalTable
------------------------------------------------------------------------------
xfRLPtpTerminalTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPtpTerminalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-point terminal managed objects.
The table is indexed with entLogicalIndex.
"
::= { xfRadioLinkPtpTerminalObjects 1 }
xfRLPtpTerminalEntry OBJECT-TYPE
SYNTAX XfRLPtpTerminalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRLPtpTerminalTable"
INDEX { entLogicalIndex}
::= { xfRLPtpTerminalTable 1 }
XfRLPtpTerminalEntry ::=
SEQUENCE
{
xfTermId SnmpAdminString,
xfTermType INTEGER,
xfTermProtection INTEGER,
xfTermCapacity INTEGER,
xfTermCapacityCapability BITS,
xfTermModulation TermModulation,
xfTermModulationCapability BITS,
xfTermRestore INTEGER,
xfTermAlarmSeverity BITS,
xfTermTrapEnable INTEGER,
xfTermAsPort INTEGER,
xfTermRemoteIdCheck INTEGER,
xfTermRemoteId SnmpAdminString,
xfTermPreset INTEGER,
xfTermBerAlarmThreshold INTEGER,
xfTermFadeNotificationTimer Integer32,
xfTermEquipmentProtectionIndex Integer32,
xfTermSysName DisplayString,
xfTermChannelMode ChannelMode,
xfTermChannelModeCapability BITS,
xfTermTrafficAndDCN INTEGER,
xfTermFrameFormat INTEGER,
xfTermFrameFormatCapability BITS,
xfTermDCNRadioConfiguration INTEGER,
xfTermDCNRadioCapability BITS,
xfTermDCNLineConfiguration INTEGER,
xfTermDCNLineCapability BITS,
xfTermFadeNotificationConfiguration INTEGER,
xfTermLineProtection INTEGER
}
--
-- The xfRLPtpTerminalTable MOs
--
xfTermId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Network identity for terminal.
Same as GNM id.
Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
Default = .TRMA. (also for Far End)
Near end access: read-write
Far end access: read-write (Traffic Node), read-only (other)
"
::= { xfRLPtpTerminalEntry 1 }
xfTermType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rlMLE(2),
rlXfMLE(3),
rlXfMLTN(4),
rlXfMLStandalone(5),
rlXfMLTNPT(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Terminal type
- other - Unknown
- rlMLE - MLE classic
- rlXfMLE - MMU2
- rlXfMLTN - MMU2B
- rlXfMLStandalone(5) - MMU2 CS
- rlXfMLTNPT(6) - Pt1
"
::= { xfRLPtpTerminalEntry 2 }
xfTermProtection OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unprotected(2),
protectedHotStandby(3),
protectedWorkingStandby(4),
unProtectedSDC(5),
enhancedRLB(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets the protection mode of the terminal.
- other - Unknown
- unprotected - 1+0
- protectedHotStandby - 1+1 Hot
- protectedWorkingStandby - 1+1 Working
- UnProtectedSDC - 1+0 with Space Diversity
- enhancedRLB - Enhanced Radio Link Bonding (1+1 PDH and 1+1/2+0 Ethernet)
Default value: unprotected(2)
Near end access: read-write
Far end access: read-write (Traffic Node), read-only (other)
"
::= { xfRLPtpTerminalEntry 3 }
xfTermCapacity OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
twoE1(2),
fourE1(3),
oneE2(4),
twoE2(5),
oneE3oneE1(6),
twoE3(7),
fourE3(8),
fourDS1(9),
eightDS1(10),
sixteenDS1(11),
seventeenDS1(12),
oneStm0(13),
oneStm1oneE1(14),
thirtytwoDS1(15),
oneStm1oneDS1(16),
oneStm1oneE1at50MHz(17),
twentytwoE1(18),
thirtyfiveE1(19),
fortysixE1(20),
seventyfiveE1(21),
oneStm1OneJ1(22),
sixtynineDS1(23),
eightyDS1(24),
oneStm1OneE1LH(25),
oneStm1OneDS1LH(26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets the capacity on the terminal
* other - Unknown
* twoE1 - 2x2 Mbps
* fourE1 - 4*2 Mbps (only rlMLE)
* oneE2 - 8 Mbps
* twoE2 - 2x8 Mbps
* oneE3oneE1 - 34+2 Mbps
* twoE3 - 2x34 Mbps
* fourE3 - 4*34 Mbps
* fourDS1 - 4xDS1
* eightDS1 - 8xDS1
* sixteenDS1 - 16*DS1
* seventeenDS1 - 16DS1+DS1
* oneStm0 - STM-0
* oneStm1oneE1 - STM-1+2
* thirtytwoDS1 - 32xDS1
* oneStm1oneDS1 - STM-1+DS1
* oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz
* twentytwoE1 - 22xE1
* thirtyfiveE1 - 35xE1
* fortysixE1 - 46xE1
* seventyfiveE1 - 75xE1
* oneStm1OneJ1 - 1xSTM-1 + 1xJ1
* sixtynineDS1 - 69xDS1
* eightyDS1 - 80xDS1
* oneStm1OneE1LH - STM-1+2 for LH
* oneStm1OneDS1LH - STM-1+DS1 for LH
Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C
Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA
Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D
Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA
Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F
Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F
Near end access: read-write
Far end access: read-write (Traffic Node), read-only (MLE)
Note that setting far end xfTermCapacity will remove far end traffic cross connects.
oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has
the same capacity and modulation but at different
bandwidth, hence the two values.
Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH,
ATU and ATU B OFH are under license control.
"
::= { xfRLPtpTerminalEntry 4 }
xfTermCapacityCapability OBJECT-TYPE
SYNTAX BITS
{
oneE1(0),
twoE1(1),
fourE1(2),
oneE2(3),
twoE2(4),
oneE3oneE1(5),
twoE3(6),
fourE3(7),
fourDS1(8),
eightDS1(9),
sixteenDS1(10),
seventeenDS1(11),
oneStm0(12),
oneStm1oneE1(13),
thirtytwoDS1(14),
oneStm1oneDS1(15),
oneStm1oneE1at50MHz(16),
twentytwoE1(17),
thirtyfiveE1(18),
fortysixE1(19),
seventyfiveE1(20),
oneStm1OneJ1(21),
sixtynineDS1(22),
eightyDS1(23),
oneStm1OneE1LH(24),
oneStm1OneDS1LH(25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the capacity capability on the terminal.
Binary AND on contained modems units capabilities.
"
::= { xfRLPtpTerminalEntry 5 }
xfTermModulation OBJECT-TYPE
SYNTAX TermModulation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets the modulation method on the terminal.
Legal settable values are:
- cqpsk(2) CQPSK
- qam16(3) 16-QAM
- qam128(4) 128-QAM
- qam32(5) 32-QAM
- qam64(6) 64-QAM
Default value PDH CQPSK ETSI: cqpsk(2) MMU2, MMU2 B, MMU2 C
Default value PDH CQPSK ANSI: cqpsk(2) MMU2 BA, MMU2 CA
Default value PDH QAM ETSI: qam16(3) MMU2 D
Default value PDH QAM ANSI: qam128(4) MMU2 DA
Default value SDH ETSI: qam128(4) MMU2 E, MMU2 F
Default value SDH ANSI: qam128(4) MMU2 E, MMU2 F
Near end access: read-write
Far end access: read-write (Traffic Node), read-only (other)
Note that setting far end xfTermModulation might remove far end traffic connections.
Modulation other than CQPSK for MMU2 C OFH are under license control.
"
::= { xfRLPtpTerminalEntry 6 }
xfTermModulationCapability OBJECT-TYPE
SYNTAX BITS
{
cqpsk(0),
qam16(1),
qam128(2),
qam32(3),
qam64(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the modulation capability on the terminal.
Binary AND on contained modems and radio units capabilities.
"
::= { xfRLPtpTerminalEntry 7 }
xfTermRestore OBJECT-TYPE
SYNTAX INTEGER { restore(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
rlXfMLTN:
Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable,
turn transmitter on and set protection switch mode to Auto.
In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loop.
Far end rlMLE and rlXfMLE:
Restore command sets P-mark to off, all loops are set to off, all Test Port connections
are removed, Transmitter is set to On and Switch Mode is set to Auto.
"
::= { xfRLPtpTerminalEntry 8 }
xfTermAlarmSeverity OBJECT-TYPE
SYNTAX BITS
{
termSeverity0(0),
termSeverity1(1),
termSeverity2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the highest alarm severity for contained
units and interfaces in the terminal including E1, E2 and E3 interfaces.
Terminal alarm severity is indicated by 3 bits:
bits 012
000 clear
001 undetermined
010 warning
011 minor
100 major
101 critical
110 not defined
111 not applicable
"
::= { xfRLPtpTerminalEntry 9 }
xfTermTrapEnable OBJECT-TYPE
SYNTAX INTEGER { unknown(1), enable(2), disable(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Disables/enables trap sending from this terminal.
Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces.
Default value: enable(2)
"
::= { xfRLPtpTerminalEntry 10 }
xfTermAsPort OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(1),
aspX002(2),
aspX003(3),
aspX004(4),
aspX005(5),
aspX006(6),
aspX007(7),
aspX008(8),
aspX009(9),
aspX010(10),
aspX011(11),
aspX012(12),
aspX013(13),
aspX014(14),
aspX015(15),
aspX016(16),
aspX017(17),
aspX018(18),
aspX019(19),
aspX020(20),
aspX021(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE,
else notAvailable (1).
rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE.
aspX002 - Port 3002/4002
.. - ..
aspX021 - Port 3021/4021
Note, Last available port differs between
different AMMs.
AMM 2p: aspX003
AMM 6p: aspX006
AMM 20p: aspX021
Near end access: read-only
Far end access: no access
"
::= { xfRLPtpTerminalEntry 11 }
xfTermRemoteIdCheck OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets if check of identity of remote terminal shall be performed or not.
Legal values are:
- enable(2): radio id check enabled
- disable(3): radio id check disabled
Default value: disable(3)
"
::= { xfRLPtpTerminalEntry 12 }
xfTermRemoteId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Network identity for remote terminal. Same as GNM id.
Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
A change of the far end value might disconnect IP DCN, but
internal GNM connection will not be disconnected.
Default value: TRMB (initial)
"
::= { xfRLPtpTerminalEntry 13 }
xfTermPreset OBJECT-TYPE
SYNTAX INTEGER { preset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
For terminals with termType = rlXfMLE or rlMLE:
- Terminal is restored with factory settings.
- Protected terminals will be set to unprotected.
For terminals with termType = rlXfMLTN:
- Terminal is restored with default configuration.
Near end access: read-write
Far end access: no access
"
::= { xfRLPtpTerminalEntry 14 }
xfTermBerAlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ber1e3(2),
ber1e4(3),
ber1e5(4),
ber1e6(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Threshold for BER alarm.
Legal values:
- ber1e3(2): BER=1e-3 (default)
- ber1e4(3): BER=1e-4
- ber1e5(4): BER=1e-5
- ber1e6(5): BER=1e-6
"
::= { xfRLPtpTerminalEntry 15 }
xfTermFadeNotificationTimer OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Notification suppression timer for protection alarms.
Unit: 1 sec
Value range: 0-1000
Default value: 200
Near end access: read-write
Far end access: read-only (Traffic Node)
"
::= { xfRLPtpTerminalEntry 16 }
xfTermEquipmentProtectionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Unprotected: 0
Protected: EntPhysicalindex of MMU in lowest slot
"
::= { xfRLPtpTerminalEntry 17 }
xfTermSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The system name of the TN hosting the terminal.
Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead.
Far end terminal: the system name is returned.
"
::= { xfRLPtpTerminalEntry 18 }
xfTermChannelMode OBJECT-TYPE
SYNTAX ChannelMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Channel mode for the terminal (administrative status).
This is only settable according to xfTermChannelModeCapability.
Legal values are:
- ccdp(2): Co-Channel Dual Polarization (XPIC)
- accp(3): Adjacent Channels Co-Polarization (non-XPIC)
- acap(4): Adjacent Channels Alternate Polarization (non-XPIC)
Default value: acap(4)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 19 }
xfTermChannelModeCapability OBJECT-TYPE
SYNTAX BITS
{
ccdp(0),
accp(1),
acap(2),
ccdp16QAM(3),
ccdp64QAM(4),
ccdp128QAM(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Channel mode capability.
Legal values are:
- ccdp(0) ........ Co-Channel Dual Polarization (XPIC)
- accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC)
- acap(2) ........ Adjacent Channels Alternate Polarization (non-XPIC)
- ccdp16QAM(3).... Co-Channel Dual Polarization (XPIC) for 16QAM only on MMU2 F
- ccdp64QAM(4).... Co-Channel Dual Polarization (XPIC) for 64QAM only on MMU2 F
- ccdp128QAM(5)... Co-Channel Dual Polarization (XPIC) for 128QAM only on MMU2 F
Default value: acap(2)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 20 }
xfTermTrafficAndDCN OBJECT-TYPE
SYNTAX INTEGER {trafficAndDCN(1), dcnOnly(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable or disable traffic.
AIS is generated on all traffic interfaces when traffic is disabled,
i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though
(primarily used for license handling).
Default value: trafficAndDCN(1)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 21 }
xfTermFrameFormat OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
version0(2),
version1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The frame format version used by the modem.
Legal values are:
- version0(2) only valid for MMU2 C modems
- version1(3) only valid for MMU2 C modem.
Default value: other(1)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 22 }
xfTermFrameFormatCapability OBJECT-TYPE
SYNTAX BITS
{
version0(0),
version1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame format versions supported by the modem.
Bit 0: modem MMU2 C supports frame format Version 0
Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3)
"
::= { xfRLPtpTerminalEntry 23 }
xfTermDCNRadioConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
dcnRadio128kbps(2),
dcnRadio320kbpsDCCr(3),
dcnRadio320kbpsMSB(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
DCN radio capacity for terminal.
Legal values are:
- dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop
- dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default)
- dcnRadio320kbpsMSB (4) 128 kbps + MSB
Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
are used when 320kbpsMSB value is selected.
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 24 }
xfTermDCNRadioCapability OBJECT-TYPE
SYNTAX BITS
{
dcnRadio128kbps(0),
dcnRadio320kbpsDCCr(1),
dcnRadio320kbpsMSB(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Binary AND on contained MMUs DCN radio configuration capability.
bits 210
000 undetermined
001 128kbps
010 320kbpsDCCr
100 320kbpsMSB
...
111 128kbps & 320kbpsDCCr & 320kbpsMSB
"
::= { xfRLPtpTerminalEntry 25 }
xfTermDCNLineConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
transparent(2),
dcnLine192kbpsDCCr(3),
dcnLine192kbpsMSB(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
DCN line capacity for terminal.
Legal values are:
transparent(2) All RSOH bytes pass transparently over the hop.
dcnLine192kbpsDCCr(3) (default) DCCr
dcnLine192kbpsMSB(4) MSB
Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
are used when 192kbpsMSB value is selected.
Default value: dcnLine192kbpsDCCr(3)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 26 }
xfTermDCNLineCapability OBJECT-TYPE
SYNTAX BITS
{
transparent(0),
dcnLine192kbpsDCCr(1),
dcnLine192kbpsMSB(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Binary AND on contained MMUs DCN line configuration.
bits 210
000 undetermined
001 transparent
010 192kbpsDCCr
100 192kbpsMSB
...
111 transparent & 192kbpsDCCr & 192kbpsMSB
"
::= { xfRLPtpTerminalEntry 27 }
xfTermFadeNotificationConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object enables or disables the notification suppress timer for Protection alarm.
Default value: enabled(3),
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 28 }
xfTermLineProtection OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unProtected(2),
singleInterfaceLowSlot(3),
singleInterfaceHighSlot(4),
opticalSplitter(5),
equipmentAndLineProtection(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Administrative status of the line protection for a terminal physical line
interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode.
Legal values are:
other(1) (Not settable)
unProtected(2)
singleInterfaceLowSlot(3) SI low slot
singleInterfaceHighSlot(4) SI high slot
opticalSplitter(5) EEP
equipmentAndLineProtection(6). ELP
Default value: unProtected(2)
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalEntry 29 }
------------------------------------------------------------------------------
-- xfRLPtpTerminalOutputPowerTable
------------------------------------------------------------------------------
xfRLPtpTerminalOutputPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPtpTerminalOutputPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for Radiolink point-to-points terminal output power
managed objects. The tabled is indexed with entLogicalIndex.
"
::= { xfRadioLinkPtpTerminalObjects 2 }
xfRLPtpTerminalOutputPowerEntry OBJECT-TYPE
SYNTAX XfRLPtpTerminalOutputPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRLPtpTerminalOutputPowerTable"
INDEX { entLogicalIndex}
::= { xfRLPtpTerminalOutputPowerTable 1 }
XfRLPtpTerminalOutputPowerEntry ::=
SEQUENCE
{
xfTermOutputPowerOperStatus TermOutputPowerStatus,
xfTermOutputPowerAdminStatus TermOutputPowerStatus,
xfTermAtpcCapability INTEGER
}
--
-- The xfRLPtpTerminalOutputPowerTable MOs
--
xfTermOutputPowerOperStatus OBJECT-TYPE
SYNTAX TermOutputPowerStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the output power mode that is
running. It is necessarily not equal to configured mode.
"
::= { xfRLPtpTerminalOutputPowerEntry 1 }
xfTermOutputPowerAdminStatus OBJECT-TYPE
SYNTAX TermOutputPowerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object sets the output mode of the terminal.
Legal values are:
- other(1)
- rtpc(2)
- atpc(3)
- localControl(4)
- ra1LocalControlRa2Rtpc(5)
- ra1RtpcRa2LocalControl(6)
Note, It is only possible to select atpc if
xfTermAtpcCapability = supportsAtpc for both near end
and far end terminal. Value other(1) not settable.
Default value: rtpc(2)
"
::= { xfRLPtpTerminalOutputPowerEntry 2 }
xfTermAtpcCapability OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noAtpcSupport(2),
doesNotExist(3),
atpcCapabilityUnknown(4),
supportsAtpc(5),
supportsAtpcFallback(6),
supportsAtpcFallbackTimer(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the ATPC capability for the
terminal, calculated as worst case capability
for all units contained in the terminal.
"
::= { xfRLPtpTerminalOutputPowerEntry 3 }
------------------------------------------------------------------------------
-- xfRLPtpTerminalPerformanceTable
------------------------------------------------------------------------------
xfRLPtpTerminalPerformanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPtpTerminalPerformanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for performance data. For 1+0 systems performance
data is calculated according to ITU-T Rec. G.826. For
1+1 systems - calculated as the combined performance
of the protected terminal.
1+0 terminals uses ifindex for RAU IF
1+1 terminals uses ifindex for SWITCH IF
"
::= { xfRadioLinkPtpTerminalObjects 4 }
xfRLPtpTerminalPerformanceEntry OBJECT-TYPE
SYNTAX XfRLPtpTerminalPerformanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRLPtpTerminalPerformanceTable"
INDEX { ifIndex}
::= { xfRLPtpTerminalPerformanceTable 1 }
XfRLPtpTerminalPerformanceEntry ::=
SEQUENCE
{
xfTermTimeElapsed Counter32,
xfTermCurrentES Counter32,
xfTermCurrentSES Counter32,
xfTermCurrentBBE Counter64,
xfTermCurrentUAS Counter32,
xfTermCurrentBB Counter64,
xfTermPerfReset INTEGER,
xfTermTimeElapsedEnRLBExt Counter32
}
--
-- The xfRLPtpTerminalPerformanceTable MOs
--
xfTermTimeElapsed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds that have elapsed
since the beginning of the current error-measurement
period.
If the current interval exceeds the maximum
value, the agent will return the maximum
value.
"
::= { xfRLPtpTerminalPerformanceEntry 1 }
xfTermCurrentES OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the error seconds.
"
::= { xfRLPtpTerminalPerformanceEntry 2 }
xfTermCurrentSES OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the severely error seconds.
"
::= { xfRLPtpTerminalPerformanceEntry 3 }
xfTermCurrentBBE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the background block errors.
"
::= { xfRLPtpTerminalPerformanceEntry 4 }
xfTermCurrentUAS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the unavailable seconds (or unavailable time).
"
::= { xfRLPtpTerminalPerformanceEntry 5 }
xfTermCurrentBB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the background blocks.
"
::= { xfRLPtpTerminalPerformanceEntry 6 }
xfTermPerfReset OBJECT-TYPE
SYNTAX INTEGER { performanceReset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is used to reset the performance counters.
It is settable also when the radio unit isn't present.
Near end access: read-write
Far end access: read-write (Traffic Node only)
"
::= { xfRLPtpTerminalPerformanceEntry 7 }
xfTermTimeElapsedEnRLBExt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds that have elapsed
in Enhanced RLB Extended capacity mode
since RLB was enabled and the beginning of
the current measurement period.
"
::= { xfRLPtpTerminalPerformanceEntry 8 }
------------------------------------------------------------------------------
-- xfRLProtectionTable
------------------------------------------------------------------------------
xfRLProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for control and supervision of the protection mechanism
"
::= { xfRadioLinkPtpTerminalObjects 5 }
xfRLProtectionEntry OBJECT-TYPE
SYNTAX XfRLProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRLProtectionTable"
INDEX { entPhysicalIndex }
::= { xfRLProtectionTable 1 }
XfRLProtectionEntry ::=
SEQUENCE
{
xfRLProtectionMode INTEGER,
xfRLProtectionRau1 Integer32,
xfRLProtectionRau2 Integer32,
xfRLActiveTxRadio INTEGER,
xfRLSwitchOverReset INTEGER,
xfRLSwitchRevertiveTx INTEGER,
xfRLProtectionCapability BITS,
xfRLTxSwitchOverConfiguration INTEGER
}
--
-- The xfRLProtectionTable MOs
--
xfRLProtectionMode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unprotected(2),
protectedHotStandby(3),
protectedWorkingStandby(4),
unProtectedSDC(5),
enhancedRLBProtected(7),
enhancedRLBExtended(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This is the operational status of the protection mode.
Default: unprotected(2)
"
::= { xfRLProtectionEntry 1 }
xfRLProtectionRau1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
entPhysicalIndex for RAU 1.
"
::= { xfRLProtectionEntry 2 }
xfRLProtectionRau2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
entPhysicalIndex for RAU 2.
"
::= { xfRLProtectionEntry 3 }
xfRLActiveTxRadio OBJECT-TYPE
SYNTAX INTEGER { txRadio1(1), txRadio2(2), txRadio1andtxRadio2(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Active radio setting.
Default value: txRadio1(1)
"
::= { xfRLProtectionEntry 4 }
xfRLSwitchOverReset OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Reset of the activated external alarms Tx Switch Over and Remote Tx Switch
Over by resetting internal alarms.
"
::= { xfRLProtectionEntry 5 }
xfRLSwitchRevertiveTx OBJECT-TYPE
SYNTAX INTEGER { txRadio1(1), txRadio2(2), off(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Preferred Tx Radio.
Default value: off(3)
Near end access: read-write
Far end access: read-only (Traffic Node only)
"
::= { xfRLProtectionEntry 6 }
xfRLProtectionCapability OBJECT-TYPE
SYNTAX BITS
{
revertiveSwitching(0),
txSwitchOverConfiguration(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows the protection capabilities of the
traffic node.
Near end access: read-only
Far end access: read-only
"
::={ xfRLProtectionEntry 7 }
xfRLTxSwitchOverConfiguration OBJECT-TYPE
SYNTAX INTEGER { other(1), disabled(2), enabled(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether the remote Tx switching function and
Tx switchover alarm are enabled. When disabled, the
remote Tx switching function is disabled and Tx switchover
alarm is never raised and xfRLSwitchOverReset is never
needed to reset these alarms.
- Other (1)
- Disabled (2) (default)
- Enabled (3)
Near end access: read-write
Far end access: read-write
"
::= { xfRLProtectionEntry 8 }
------------------------------------------------------------------------------
-- xfRLLineProtectionTable
------------------------------------------------------------------------------
xfRLLineProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLLineProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Table for line protection status.
"
::= { xfRadioLinkPtpTerminalObjects 6 }
xfRLLineProtectionEntry OBJECT-TYPE
SYNTAX XfRLLineProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRLLineProtectionTable"
INDEX { ifIndex }
::= { xfRLLineProtectionTable 1 }
XfRLLineProtectionEntry ::=
SEQUENCE
{
xfRLLineProtectionStatus BITS,
xfRLLineProtectionMode INTEGER
}
--
-- The xfRLLineProtectionTable MOs
--
xfRLLineProtectionStatus OBJECT-TYPE
SYNTAX BITS
{
hitlessPhase0(0),
hitlessPhase1(1),
hitlessPhase2(2),
txSwitchover0(3),
txSwitchover1(4),
txSwitchover2(5),
remoteTxSwitchOver0(6),
remoteTxSwitchOver1(7),
remoteTxSwitchOver2(8),
rfInputThresholdProtection0(9),
rfInputThresholdProtection1(10),
rfInputThresholdProtection2(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Extension to xfLineProtectionStatus.
"
::= { xfRLLineProtectionEntry 1 }
xfRLLineProtectionMode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unProtected(2),
singleInterfaceLowSlot(3),
singleInterfaceHighSlot(4),
opticalSplitter(5),
equipmentAndLineProtection(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Operational status of the line
protection for a terminal physical
line interface, e.g. MMU2 E and
MMU2 F.
Administrative status is
xfTermLineProtection.
"
::= { xfRLLineProtectionEntry 2 }
------------------------------------------------------------------------------
-- xfRADIORSTable
------------------------------------------------------------------------------
xfRADIORSTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRADIORSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Traffic node extension of ifTable. The tabled is indexed with ifIndex.
"
::= { xfRadioLinkPtpTerminalObjects 7 }
xfRADIORSEntry OBJECT-TYPE
SYNTAX XfRADIORSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRADIORSTable"
INDEX { ifIndex}
::= { xfRADIORSTable 1 }
XfRADIORSEntry ::=
SEQUENCE
{
xfRADIORSAlarms BITS
}
--
-- The xfRADIORSTable MOs
--
xfRADIORSAlarms OBJECT-TYPE
SYNTAX BITS
{
timRadioSide0(0),
timRadioSide1(1),
timRadioSide2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows rau rs related alarms.
"
::= { xfRADIORSEntry 1 }
------------------------------------------------------------------------------
-- xfRADIORSPerformanceTable
------------------------------------------------------------------------------
xfRADIORSPerformanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRADIORSPerformanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Traffic node extension of ifTable. The tabled is indexed with
ifIndex.
"
::= { xfRadioLinkPtpTerminalObjects 8 }
xfRADIORSPerformanceEntry OBJECT-TYPE
SYNTAX XfRADIORSPerformanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the xfRADIORSPerformanceTable"
INDEX { ifIndex}
::= { xfRADIORSPerformanceTable 1 }
XfRADIORSPerformanceEntry ::=
SEQUENCE
{
xfRADIORSPerformanceAlarms BITS
}
--
-- The xfRADIORSPerformanceTable MOs
--
xfRADIORSPerformanceAlarms OBJECT-TYPE
SYNTAX BITS
{
b1UnavailablePeriod0(0),
b1UnavailablePeriod1(1),
b1UnavailablePeriod2(2),
b1Es15m0(3),
b1Es15m1(4),
b1Es15m2(5),
b1Ses15m0(6),
b1Ses15m1(7),
b1Ses15m2(8),
b1Bbe15m0(9),
b1Bbe15m1(10),
b1Bbe15m2(11),
b1Es24h0(12),
b1Es24h1(13),
b1Es24h2(14),
b1Ses24h0(15),
b1Ses24h1(16),
b1Ses24h2(17),
b1Bbe24h0(18),
b1Bbe24h1(19),
b1Bbe24h2(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object shows RAU RS related alarms.
"
::= { xfRADIORSPerformanceEntry 1 }
------------------------------------------------------------------------------
-- xfRLPMConfigTable
------------------------------------------------------------------------------
xfRLPMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the alarm threshold values for RL PM"
::= { xfRadioLinkPtpTerminalObjects 9 }
xfRLPMConfigEntry OBJECT-TYPE
SYNTAX XfRLPMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMConfigTable."
INDEX { ifIndex }
::= { xfRLPMConfigTable 1 }
XfRLPMConfigEntry ::=
SEQUENCE {
xfPMSetThreshold15mESs
Integer32,
xfPMSetThreshold15mSESs
Integer32,
xfPMSetThreshold15mBBEs
Integer32,
xfPMResetThreshold15mESs
Integer32,
xfPMResetThreshold15mSESs
Integer32,
xfPMResetThreshold15mBBEs
Integer32,
xfPMSetThreshold24hESs
Integer32,
xfPMSetThreshold24hSESs
Integer32,
xfPMSetThreshold24hBBEs
Integer32,
xfPMView
INTEGER,
xfPMStatus
BITS,
xfPMRLTS1Threshold
Integer32,
xfPMSetThreshold15mRLTS1
Integer32,
xfPMResetThreshold15mRLTS1
Integer32,
xfPMRLTS2Threshold
Integer32,
xfPMSetThreshold15mRLTS2
Integer32,
xfPMResetThreshold15mRLTS2
Integer32,
xfPMSetThreshold15mRLTM
Integer32,
xfPMResetThreshold15mRLTM
Integer32,
xfPMTLTS1Threshold
Integer32,
xfPMSetThreshold15mTLTS1
Integer32,
xfPMResetThreshold15mTLTS1
Integer32,
xfPMSetThreshold15mTLTM
Integer32,
xfPMResetThreshold15mTLTM
Integer32,
xfPMSetThreshold24hRLTS1
Integer32,
xfPMSetThreshold24hRLTS2
Integer32,
xfPMSetThreshold24hRLTM
Integer32,
xfPMSetThreshold24hTLTS1
Integer32,
xfPMSetThreshold24hTLTM
Integer32
}
--
-- The xfRLPMConfigTable MOs
--
xfPMSetThreshold15mESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute set threshold for ES.
Default value is 180.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 1 }
xfPMSetThreshold15mSESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute set threshold for SES.
Default value is 15.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 2 }
xfPMSetThreshold15mBBEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute set threshold for BBE.
Default value is 9900.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 3 }
xfPMResetThreshold15mESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute reset threshold for ES.
Default value is 20.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 4 }
xfPMResetThreshold15mSESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute reset threshold for SES.
Default value is 1.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 5 }
xfPMResetThreshold15mBBEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute reset threshold for BBE.
Default value is 200.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 6 }
xfPMSetThreshold24hESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 24 hours set threshold for ES.
Default value is 1500.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 7 }
xfPMSetThreshold24hSESs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 24 hours set threshold for SES.
Default value is 20.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 8 }
xfPMSetThreshold24hBBEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 24 hours set threshold for BBE.
Default value is 48000.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 9 }
xfPMView OBJECT-TYPE
SYNTAX INTEGER
{
pmEnable(1),
pmDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable/disable visibility of PM tables.
Default value: pmEnable(1)
Near end access: read-write
Far end access: No access
"
::= { xfRLPMConfigEntry 10 }
xfPMStatus OBJECT-TYPE
SYNTAX BITS
{
unavailablePeriod0(0),
unavailablePeriod1(1),
unavailablePeriod2(2),
es15m0(3),
es15m1(4),
es15m2(5),
ses15m0(6),
ses15m1(7),
ses15m2(8),
bbe15m0(9),
bbe15m1(10),
bbe15m2(11),
es24h0(12),
es24h1(13),
es24h2(14),
ses24h0(15),
ses24h1(16),
ses24h2(17),
bbe24h0(18),
bbe24h1(19),
bbe24h2(20),
-- Begin: these alarms are related to obsoleted MOs, they are not meaningful anymore
rlts1Counter15m0(21),
rlts1Counter15m1(22),
rlts1Counter15m2(23),
rlts2Counter15m0(24),
rlts2Counter15m1(25),
rlts2Counter15m2(26),
rltmCounter15m0(27),
rltmCounter15m1(28),
rltmCounter15m2(29),
tlts1Counter15m0(30),
tlts1Counter15m1(31),
tlts1Counter15m2(32),
tltmCounter15m0(33),
tltmCounter15m1(34),
tltmCounter15m2(35),
rlts1Counter24h0(36),
rlts1Counter24h1(37),
rlts1Counter24h2(38),
rlts2Counter24h0(39),
rlts2Counter24h1(40),
rlts2Counter24h2(41),
rltmCounter24h0(42),
rltmCounter24h1(43),
rltmCounter24h2(44),
tlts1Counter24h0(45),
tlts1Counter24h1(46),
tlts1Counter24h2(47),
tltmCounter24h0(48),
tltmCounter24h1(49),
tltmCounter24h2(50)
-- End: these alarms are related to obsoleted MOs
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold alarm status.
Values from rlts1Counter15m0(21) to tltmCounter24h2(50)
are related to obsoleted MOs."
::= { xfRLPMConfigEntry 11 }
xfPMRLTS1Threshold OBJECT-TYPE
SYNTAX Integer32 (-999..-201)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RLTS1 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.1 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always less than RLTS2, xfPMRLTS2Threshold."
DEFVAL {-999}
::= { xfRLPMConfigEntry 12 }
xfPMSetThreshold15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Always greater than alarm Reset, xfPMResetThreshold15mRLTS1."
DEFVAL {150}
::= { xfRLPMConfigEntry 13 }
xfPMResetThreshold15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute interval.
Always less than alarm Set, xfPMSetThreshold15mRLTS1."
DEFVAL {1}
::= { xfRLPMConfigEntry 14 }
xfPMRLTS2Threshold OBJECT-TYPE
SYNTAX Integer32 (-998..-200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RLTS2 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.8 ... -20.0 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always greater than RLTS1, xfPMRLTS1Threshold."
DEFVAL {-998}
::= { xfRLPMConfigEntry 15 }
xfPMSetThreshold15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTS2."
DEFVAL {180}
::= { xfRLPMConfigEntry 16 }
xfPMResetThreshold15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute interval.
Always less or equal to alarm Set, xfPMSetThreshold15mRLTS2."
DEFVAL {20}
::= { xfRLPMConfigEntry 17 }
xfPMSetThreshold15mRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Input Power
in current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTM."
DEFVAL {800}
::= { xfRLPMConfigEntry 18 }
xfPMResetThreshold15mRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Input Power
for entire current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
Always less or equal to alarm Set, xfPMSetThreshold15mRLTM."
DEFVAL {790}
::= { xfRLPMConfigEntry 19 }
xfPMTLTS1Threshold OBJECT-TYPE
SYNTAX Integer32 (-100..45)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TLTS1 Alarm Threshold for Maximum RF Output Power.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset."
DEFVAL {45}
::= { xfRLPMConfigEntry 20 }
xfPMSetThreshold15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 15 minute interval.
Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTS1."
DEFVAL {180}
::= { xfRLPMConfigEntry 21 }
xfPMResetThreshold15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
for entire current 15 minute interval.
Always less or equal to alarm Set, xfPMSetThreshold15mTLTS1."
DEFVAL {20}
::= { xfRLPMConfigEntry 22 }
xfPMSetThreshold15mTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Output Power
in current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTM."
DEFVAL {145}
::= { xfRLPMConfigEntry 23 }
xfPMResetThreshold15mTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Output Power
for entire current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
Always less or equal to alarm Set, xfPMSetThreshold15mTLTM."
DEFVAL {144}
::= { xfRLPMConfigEntry 24 }
xfPMSetThreshold24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval."
DEFVAL {20}
::= { xfRLPMConfigEntry 25 }
xfPMSetThreshold24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval."
DEFVAL {1500}
::= { xfRLPMConfigEntry 26 }
xfPMSetThreshold24hRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Input Power
in current 24 hour interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]"
DEFVAL {800}
::= { xfRLPMConfigEntry 27 }
xfPMSetThreshold24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 24 hour interval."
DEFVAL {1500}
::= { xfRLPMConfigEntry 28 }
xfPMSetThreshold24hTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Output Power
in current 24 hour interval.
RF output level = value dB.
Domain: [1 ... 145 dB]"
DEFVAL {145}
::= { xfRLPMConfigEntry 29 }
------------------------------------------------------------------------------
-- xfRLPMCurrent24hTable
------------------------------------------------------------------------------
xfRLPMCurrent24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 10 }
xfRLPMCurrent24hEntry OBJECT-TYPE
SYNTAX XfRLPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMCurrent24hTable."
INDEX { ifIndex }
::= { xfRLPMCurrent24hTable 1 }
XfRLPMCurrent24hEntry ::=
SEQUENCE {
xfPMCurrent24hTimeElapsed
Counter32,
xfPMCurrent24hESs
PerfCurrentCount,
xfPMCurrent24hSESs
PerfCurrentCount,
xfPMCurrent24hBBEs
HCPerfCurrentCount,
xfPMCurrent24hUASs
PerfCurrentCount,
xfPMCurrent24hBBs
HCPerfCurrentCount,
xfPMCurrent24hRLTS1
Integer32,
xfPMCurrent24hRLTS2
Integer32,
xfPMCurrent24hRLMin
Integer32,
xfPMCurrent24hRLMax
Integer32,
xfPMCurrent24hTLTS1
Integer32,
xfPMCurrent24hTLMin
Integer32,
xfPMCurrent24hTLMax
Integer32,
xfPMCurrent24hMSEMin
Integer32,
xfPMCurrent24hMSEMax
Integer32,
xfPMCurrent24hXPIMin
Integer32,
xfPMCurrent24hXPIMax
Integer32,
xfPMCurrent24hESR
PerfCurrentCount,
xfPMCurrent24hSESR
PerfCurrentCount,
xfPMCurrent24hBBER
HCPerfCurrentCount
}
--
-- The xfRLPMCurrent24hTable MOs
--
xfPMCurrent24hTimeElapsed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the
beginning of the current error-measurement period.
If the current interval exceeds the maximum value,
the agent will return the maximum value.
"
::= { xfRLPMCurrent24hEntry 1 }
xfPMCurrent24hESs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored Seconds in the current 24-hour interval."
::= { xfRLPMCurrent24hEntry 2 }
xfPMCurrent24hSESs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely Errored Seconds in the current 24-hour
interval."
::= { xfRLPMCurrent24hEntry 3 }
xfPMCurrent24hBBEs OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background Block Errors in the current 24 hour interval"
::= { xfRLPMCurrent24hEntry 4 }
xfPMCurrent24hUASs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (or Unavailable Time) in the current
24 hour interval."
::= { xfRLPMCurrent24hEntry 5 }
xfPMCurrent24hBBs OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Background Blocks in the current 24
hour interval."
::= { xfRLPMCurrent24hEntry 6 }
xfPMCurrent24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the current 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 7 }
xfPMCurrent24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the current 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 8 }
xfPMCurrent24hRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in current 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 9 }
xfPMCurrent24hRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in current 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 10 }
xfPMCurrent24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the current 24 hour interval
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 11 }
xfPMCurrent24hTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in current 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 12 }
xfPMCurrent24hTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in current 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 13 }
xfPMCurrent24hMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 14 }
xfPMCurrent24hMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 15 }
xfPMCurrent24hXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 16 }
xfPMCurrent24hXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent24hEntry 17 }
xfPMCurrent24hESR OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Seconds Ratio in the current 24-hour interval"
::= { xfRLPMCurrent24hEntry 18 }
xfPMCurrent24hSESR OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely Error Seconds Ratio in the current 24-hour interval"
::= { xfRLPMCurrent24hEntry 19 }
xfPMCurrent24hBBER OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background Block Errors Ratio in the current 24-hour interval"
::= { xfRLPMCurrent24hEntry 20 }
------------------------------------------------------------------------------
-- xfRLPMInterval24hTable
------------------------------------------------------------------------------
xfRLPMInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 11 }
xfRLPMInterval24hEntry OBJECT-TYPE
SYNTAX XfRLPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMInterval24hTable."
INDEX { ifIndex }
::= { xfRLPMInterval24hTable 1 }
XfRLPMInterval24hEntry ::=
SEQUENCE {
xfPMInterval24hESs
PerfIntervalCount,
xfPMInterval24hSESs
PerfIntervalCount,
xfPMInterval24hBBEs
HCPerfCurrentCount,
xfPMInterval24hUASs
PerfIntervalCount,
xfPMInterval24hBBs
HCPerfCurrentCount,
xfPMInterval24hValidData
TruthValue,
xfPMInterval24hRLTS1
Integer32,
xfPMInterval24hRLTS2
Integer32,
xfPMInterval24hRLMin
Integer32,
xfPMInterval24hRLMax
Integer32,
xfPMInterval24hTLTS1
Integer32,
xfPMInterval24hTLMin
Integer32,
xfPMInterval24hTLMax
Integer32,
xfPMInterval24hMSEMin
Integer32,
xfPMInterval24hMSEMax
Integer32,
xfPMInterval24hXPIMin
Integer32,
xfPMInterval24hXPIMax
Integer32
}
--
-- The xfRLPMInterval24hTable MOs
--
xfPMInterval24hESs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds encountered by a SONET/SDH
Section in the previous 24-hour interval."
::= { xfRLPMInterval24hEntry 1 }
xfPMInterval24hSESs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Severely
Errored Seconds encountered by a SONET/SDH
Section in the previous 24-hour interval."
::= { xfRLPMInterval24hEntry 2 }
xfPMInterval24hBBEs OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Coding Violations (Errored Blocks)
encountered by a SONET/SDH Section in the
previous 24-hour interval."
::= { xfRLPMInterval24hEntry 3 }
xfPMInterval24hUASs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UnAvailable Seconds encountered by
a SONET/SDH Section in the previous 24 hour
interval."
::= { xfRLPMInterval24hEntry 4 }
xfPMInterval24hBBs OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Background Blocks in a
SONET/SDH Section in the previous
24 hour interval."
::= { xfRLPMInterval24hEntry 5 }
xfPMInterval24hValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLPMInterval24hEntry 6 }
xfPMInterval24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the previous 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 7 }
xfPMInterval24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the previous 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 8 }
xfPMInterval24hRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 9 }
xfPMInterval24hRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 10 }
xfPMInterval24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..86400|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the previous 24 hour interval
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 11 }
xfPMInterval24hTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 12 }
xfPMInterval24hTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 13 }
xfPMInterval24hMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 14 }
xfPMInterval24hMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 15 }
xfPMInterval24hXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 16 }
xfPMInterval24hXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval24hEntry 17 }
------------------------------------------------------------------------------
-- xfRLPMCurrent15mTable
------------------------------------------------------------------------------
xfRLPMCurrent15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 12 }
xfRLPMCurrent15mEntry OBJECT-TYPE
SYNTAX XfRLPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex }
::= { xfRLPMCurrent15mTable 1 }
XfRLPMCurrent15mEntry ::=
SEQUENCE {
xfPMCurrent15mElapsedTime
Counter32,
xfPMCurrent15mESs
PerfCurrentCount,
xfPMCurrent15mSESs
PerfCurrentCount,
xfPMCurrent15mBBEs
PerfCurrentCount,
xfPMCurrent15mUASs
PerfCurrentCount,
xfPMCurrent15mBBs
PerfCurrentCount,
xfPMCurrent15mRLTS1
Integer32,
xfPMCurrent15mRLTS2
Integer32,
xfPMCurrent15mRLMin
Integer32,
xfPMCurrent15mRLMax
Integer32,
xfPMCurrent15mTLTS1
Integer32,
xfPMCurrent15mTLMin
Integer32,
xfPMCurrent15mTLMax
Integer32,
xfPMCurrent15mMSEMin
Integer32,
xfPMCurrent15mMSEMax
Integer32,
xfPMCurrent15mXPIMin
Integer32,
xfPMCurrent15mXPIMax
Integer32,
xfPMCurrent15mESR
PerfCurrentCount,
xfPMCurrent15mSESR
PerfCurrentCount,
xfPMCurrent15mBBER
HCPerfCurrentCount
}
--
-- The xfRLPMCurrent15mTable MOs
--
xfPMCurrent15mElapsedTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current error-measurement period.
"
::= { xfRLPMCurrent15mEntry 1 }
xfPMCurrent15mESs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error seconds in the current 15 minute interval."
::= { xfRLPMCurrent15mEntry 2 }
xfPMCurrent15mSESs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely error seconds in the current 15 minute interval."
::= { xfRLPMCurrent15mEntry 3 }
xfPMCurrent15mBBEs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background Block Errors in the current 15 minute interval."
::= { xfRLPMCurrent15mEntry 4 }
xfPMCurrent15mUASs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (or Unavailable Time) in the current
15 minute interval."
::= { xfRLPMCurrent15mEntry 5 }
xfPMCurrent15mBBs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Background Blocks encountered by a SONET/SDH
Section in the current 15 minute interval."
::= { xfRLPMCurrent15mEntry 6 }
xfPMCurrent15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the current 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 7 }
xfPMCurrent15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the current 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 8 }
xfPMCurrent15mRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in current 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 9 }
xfPMCurrent15mRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in current 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 10 }
xfPMCurrent15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 15 minute
Number of seconds that the RF Output Power was above the TLTS1
in the current 15 minute interval
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 11 }
xfPMCurrent15mTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in current 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 12 }
xfPMCurrent15mTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in current 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 13 }
xfPMCurrent15mMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in current 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 14 }
xfPMCurrent15mMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in current 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 15 }
xfPMCurrent15mXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in current 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 16 }
xfPMCurrent15mXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in current 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMCurrent15mEntry 17 }
xfPMCurrent15mESR OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Seconds Ratio in the current 15 minute interval"
::= { xfRLPMCurrent15mEntry 18 }
xfPMCurrent15mSESR OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely Error Seconds Ratio in the current 15 minute interval"
::= { xfRLPMCurrent15mEntry 19 }
xfPMCurrent15mBBER OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background Block Errors Ratio in the current 15 minute interval"
::= { xfRLPMCurrent15mEntry 20 }
------------------------------------------------------------------------------
-- xfRLPMInterval15mTable
------------------------------------------------------------------------------
xfRLPMInterval15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 13 }
xfRLPMInterval15mEntry OBJECT-TYPE
SYNTAX XfRLPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex, xfPMInterval15mIntervalNumber }
::= { xfRLPMInterval15mTable 1 }
XfRLPMInterval15mEntry ::=
SEQUENCE {
xfPMInterval15mIntervalNumber
Integer32,
xfPMInterval15mESs
PerfIntervalCount,
xfPMInterval15mSESs
PerfIntervalCount,
xfPMInterval15mBBEs
PerfIntervalCount,
xfPMInterval15mUASs
PerfIntervalCount,
xfPMInterval15mBBs
PerfIntervalCount,
xfPMInterval15mValidData
TruthValue,
xfPMInterval15mRLTS1
Integer32,
xfPMInterval15mRLTS2
Integer32,
xfPMInterval15mRLMin
Integer32,
xfPMInterval15mRLMax
Integer32,
xfPMInterval15mTLTS1
Integer32,
xfPMInterval15mTLMin
Integer32,
xfPMInterval15mTLMax
Integer32,
xfPMInterval15mMSEMin
Integer32,
xfPMInterval15mMSEMax
Integer32,
xfPMInterval15mXPIMin
Integer32,
xfPMInterval15mXPIMax
Integer32
}
--
-- The xfRLPMInterval15mTable MOs
--
xfPMInterval15mIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is the interval immediately preceding the one
identified by N-1."
::= { xfRLPMInterval15mEntry 1 }
xfPMInterval15mESs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval"
::= { xfRLPMInterval15mEntry 2 }
xfPMInterval15mSESs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely error seconds in the xfPDHCompInterval15mIntervalNumber
15 minute interval."
::= { xfRLPMInterval15mEntry 3 }
xfPMInterval15mBBEs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background Block Errors in the xfPDHCompInterval15mIntervalNumber
15 minute intervall."
::= { xfRLPMInterval15mEntry 4 }
xfPMInterval15mUASs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber
15 minute interval."
::= { xfRLPMInterval15mEntry 5 }
xfPMInterval15mBBs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval."
::= { xfRLPMInterval15mEntry 6 }
xfPMInterval15mValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is valid."
::= { xfRLPMInterval15mEntry 7 }
xfPMInterval15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the previous 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 8 }
xfPMInterval15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the previous 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 9 }
xfPMInterval15mRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 10 }
xfPMInterval15mRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 11 }
xfPMInterval15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (0..900|-1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 15 minute
Number of seconds that the RF Output Power was above the TLTS1
in the previous 15 minute interval
-1 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 12 }
xfPMInterval15mTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 13 }
xfPMInterval15mTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 14 }
xfPMInterval15mMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 15 }
xfPMInterval15mMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 16 }
xfPMInterval15mXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 17 }
xfPMInterval15mXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset."
::= { xfRLPMInterval15mEntry 18 }
------------------------------------------------------------------------------
-- xfRLPtpTerminalXTable
------------------------------------------------------------------------------
xfRLPtpTerminalXTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPtpTerminalXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extension table to xfRLPtpTerminalTable.
The table is indexed with entLogicalIndex."
::= { xfRadioLinkPtpTerminalObjects 14 }
xfRLPtpTerminalXEntry OBJECT-TYPE
SYNTAX XfRLPtpTerminalXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table"
INDEX { entLogicalIndex }
::= { xfRLPtpTerminalXTable 1 }
XfRLPtpTerminalXEntry ::=
SEQUENCE {
xfTermInterfaces INTEGER,
xfTermInterfacesCapability BITS,
xfTermChannelModeOperStatus ChannelMode,
xfTermXPICRestore INTEGER,
xfTermTribCapacityActual Integer32,
xfTermTribCapacityDesired Integer32,
xfTermBitPipeCapacity Integer32,
xfTermRowIndex Integer32,
xfTermCapabilitiesLastChange TimeTicks,
xfTermActualRowIndex Integer32,
xfTermMaxRowIndex Integer32,
xfTermAdaptiveManualRowIndex Integer32,
xfTermAdaptiveManualMode TermAdaptiveManualMode,
xfTermSpectrumEfficiencyClass INTEGER,
xfTermSpectrumEfficiencyClassCapability BITS,
xfTermIpAddress IpAddress,
xfTermProtectionCapability BITS,
xfTermLineProtectionCapability BITS,
xfTermTribAllocationActual BITS,
xfTermTribAllocationDesired BITS,
xfTermAutoRemoveLoopEnable TermAutoRemoveLoopEnable,
xfTermCapability BITS,
xfTermCapacityLicense INTEGER,
xfTermFadingRates INTEGER,
xfTermFadingRatesCapability BITS,
xfTermConfiguredBitPipeCapacity Integer32,
xfTermTribCapacityConfigured Integer32,
xfTermPacketMaxCapacity Integer32,
xfTermPacketMinCapacity Integer32
}
--
-- The xfRLPtpTerminalXTable MOs
--
xfTermInterfaces OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
pdhToTdmHier(2),
pdhToTdmFlat(3),
pdhToTdmFlatAndBitpipeToPtp(4),
pdhToTdmAndSDHToSFP(5),
pdhToTdmAndSDHToPtp(6),
pdhToTdmAndSDHToSFPHAndSDHToPtP(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface constellation for the terminal"
::= { xfRLPtpTerminalXEntry 1 }
xfTermInterfacesCapability OBJECT-TYPE
SYNTAX BITS
{
pdhToTdmHier(0),
pdhToTdmFlat(1),
pdhToTdmFlatAndBitpipeToPtp(2),
pdhToTdmAndSDHToSFP(3),
pdhToTdmAndSDHToPtp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface constellation capability for the terminal"
::= { xfRLPtpTerminalXEntry 2 }
xfTermChannelModeOperStatus OBJECT-TYPE
SYNTAX ChannelMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Channel mode for the terminal (operational status).
- ccdp(2): Co-Channel Dual Polarization (XPIC)
- accp(3): Adjacent Channels Co-Polarization (non-XPIC)
- acap(4): Adjacent Channels Alternate Polarization (non-XPIC)
"
::= { xfRLPtpTerminalXEntry 3 }
xfTermXPICRestore OBJECT-TYPE
SYNTAX INTEGER
{
xPicRestore(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restore XPIC"
::= { xfRLPtpTerminalXEntry 4 }
xfTermTribCapacityActual OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual tributary capacity"
::= { xfRLPtpTerminalXEntry 5 }
xfTermTribCapacityDesired OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired tributary capacity"
::= { xfRLPtpTerminalXEntry 6 }
xfTermBitPipeCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit pipe capacity, Kbps"
::= { xfRLPtpTerminalXEntry 7 }
xfTermRowIndex OBJECT-TYPE
SYNTAX Integer32 (1..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Points to a row in xfRlPtpTerminalCapabilityTable"
::= { xfRLPtpTerminalXEntry 8 }
xfTermCapabilitiesLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the last creation or
deletion of an entry in the xfRLPtpTerminalCapabilityTable.
If the number of entries has been unchanged since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { xfRLPtpTerminalXEntry 9 }
xfTermActualRowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual row that is pointed out in xfRlPtpTerminalCapabilityTable"
::= { xfRLPtpTerminalXEntry 10 }
xfTermMaxRowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license"
::= { xfRLPtpTerminalXEntry 11 }
xfTermAdaptiveManualRowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Manual row index"
::= { xfRLPtpTerminalXEntry 12 }
xfTermAdaptiveManualMode OBJECT-TYPE
SYNTAX TermAdaptiveManualMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adaptive manual mode
- other(1)
- disable(2)(default)
- enable(3)
- enabledAsRequest(4)
"
::= { xfRLPtpTerminalXEntry 13 }
xfTermSpectrumEfficiencyClass OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sec2(2),
sec3(3),
sec4L(4),
sec4H(5),
sec5A(6),
sec5B(7),
sec6A(8),
sec6B(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Spectrum Efficiency Class:
- other(1): unknown
- sec2(2): spectrum eff. Class 2
- sec3(3): spectrum eff. Class 3
- sec4L(4): spectrum eff. Class 4L
- sec4H(5): specturm eff. Class 4H
- sec5A(6): spectrum eff. Class 5A
- sec5B(7): spectrum eff. Class 5B
- sec6A(8): spectrum eff. Class 6A
- sec6B(9): spectrum eff. Class 6B
Near end access: read-write
Far end access: read-write (Traffic Node), read-only (other)"
::= { xfRLPtpTerminalXEntry 14 }
xfTermSpectrumEfficiencyClassCapability OBJECT-TYPE
SYNTAX BITS
{
sec2(0),
sec3(1),
sec4L(2),
sec4H(3),
sec5A(4),
sec5B(5),
sec6A(6),
sec6B(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Spectrum Efficiency Class Capability
- 0 Sec2 Spectrum eff. Class 2
- 1 Sec3 Specturm eff. Class 3
- 2 Sec4L Specturm eff. Class 4L
- 3 Sec4H Spectrum eff. Class 4H
- 4 Sec5A Spectrum eff. Class 5A
- 5 Sec5B Spectrum eff. Class 5B
- 6 Sec6A Spectrum eff. Class 6A
- 7 Sec6B Spectrum eff. Class 6B
"
::= { xfRLPtpTerminalXEntry 15 }
xfTermIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LAN ip address"
::= { xfRLPtpTerminalXEntry 16 }
xfTermProtectionCapability OBJECT-TYPE
SYNTAX BITS
{
unprotected(0),
protectedHotStandby(1),
protectedWorkingStandby(2),
unprotectedSD(3),
nplus1(4),
enhancedRLB(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Terminal protection capability
- 0 Unprotected ............... The terminal supports 1+0
- 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby
- 2 protectedWorkingStandby ... The terminal supports 1+1 Working Standby
- 3 unprotectedSD ............. The terminal supports 1+0 with Space diversity
- 4 nplus1 .................... The terminal supports N+1 protection (through RPS board)
- 5 enhancedRLB ............... The terminal supports Enhanced Radio Link Bonding
"
::= { xfRLPtpTerminalXEntry 17 }
xfTermLineProtectionCapability OBJECT-TYPE
SYNTAX BITS
{
unprotected(0),
singleInterfaceLowSlot(1),
singleInterfaceHighSlot(2),
opticalSplitter(3),
equipmentAndLineProtection(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Terminal Line protection capability
- 0 unprotected .................
- 1 singleInterfaceLowSlot ......
- 2 singleInterfaceHighSlot .....
- 3 opticalSplitter .............
- 4 equipmentAndLineProtection ..
"
::= { xfRLPtpTerminalXEntry 18 }
xfTermTribAllocationActual OBJECT-TYPE
SYNTAX BITS { firstE1(0) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link"
::= { xfRLPtpTerminalXEntry 19 }
xfTermTribAllocationDesired OBJECT-TYPE
SYNTAX BITS { firstE1(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link"
::= { xfRLPtpTerminalXEntry 20 }
xfTermAutoRemoveLoopEnable OBJECT-TYPE
SYNTAX TermAutoRemoveLoopEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto Remove Loops
- other(1)
- enable(2) (default)
- disable(3)
"
::= { xfRLPtpTerminalXEntry 21 }
xfTermCapability OBJECT-TYPE
SYNTAX BITS
{
adaptiveManualTx(0),
adaptiveManualRx(1),
fragmentedTributaries(2),
terminalCapacityLicense(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Terminal capability"
::= { xfRLPtpTerminalXEntry 22 }
xfTermCapacityLicense OBJECT-TYPE
SYNTAX INTEGER
{
vr0(0),
vr10(1),
vr25(2),
vr50(3),
vr100(4),
vr15(5),
vr30(6),
vr60(7),
vr125(8),
vr200(9),
vr350(10),
vr4(11),
vr500(12),
vr150(13),
vr250(14),
vr300(15),
vr400(16),
vr450(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Licensetable"
::= { xfRLPtpTerminalXEntry 23 }
xfTermFadingRates OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
fr50(2),
fr100(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fading rates
- other(1): unknown
- fr50(2): 50dB/s HighTroughputMode (default)
- fr150(3): 100dB/s HighFadingResistanceMode
"
::= { xfRLPtpTerminalXEntry 24 }
xfTermFadingRatesCapability OBJECT-TYPE
SYNTAX BITS
{
fr50(0),
fr100(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fading rate capability
- fr50(0): HighTroughputMode
- fr100(1): HighFadingResistanceMode"
::= { xfRLPtpTerminalXEntry 25 }
xfTermConfiguredBitPipeCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configured bit pipe capacity, Kbps"
::= { xfRLPtpTerminalXEntry 26 }
xfTermTribCapacityConfigured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configured tributary capacity"
::= { xfRLPtpTerminalXEntry 27 }
xfTermPacketMaxCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet Max Capacity"
::= { xfRLPtpTerminalXEntry 28 }
xfTermPacketMinCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet Min Capacity"
::= { xfRLPtpTerminalXEntry 29 }
------------------------------------------------------------------------------
-- xfRlPtpTerminalCapabilityTable
------------------------------------------------------------------------------
xfRlPtpTerminalCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRlPtpTerminalCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for misc. capability informatio."
::= { xfRadioLinkPtpTerminalObjects 15 }
xfRlPtpTerminalCapabilityEntry OBJECT-TYPE
SYNTAX XfRlPtpTerminalCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table"
INDEX { entLogicalIndex, xfTermRowIndex }
::= { xfRlPtpTerminalCapabilityTable 1 }
XfRlPtpTerminalCapabilityEntry ::=
SEQUENCE
{
xfTermChannelSpacing INTEGER,
xfTermChannelModulation TermModulation,
xfTermMaxTribCapacity Integer32,
xfTermDCNCapacity Integer32,
xfTermValidRow INTEGER,
xfTermMaxCapacity Integer32,
xfTermSpectrumEfficiencyClassObsolete TermRauSec,
xfTermFrameFormatType INTEGER,
xfTermFrameFormatRev INTEGER,
xfTermBerAlarmThresholdCapability BITS
}
--
-- The XfRlPtpTerminalCapabilityTable MOs
--
xfTermChannelSpacing OBJECT-TYPE
SYNTAX INTEGER
{
chspUnknown(0),
chsp7MHz(1),
chsp14MHz(2),
chsp20MHz(3),
chsp28MHz(4),
chsp30MHz(5),
chsp40MHz(6),
chsp50MHz(7),
chsp56MHz(8),
chsp10MHz(9),
chsp3500kHz(10),
chsp60MHz(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel spacing
- ETSI: 3.5, 7, 14, 28, 40, 56 MHz
- ANSI: 10, 20, 30, 40, 50, 60 MHz
"
::= { xfRlPtpTerminalCapabilityEntry 1 }
xfTermChannelModulation OBJECT-TYPE
SYNTAX TermModulation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel modulation
- cqpsk(2) CQPSK
- qam16(3) 16-QAM
- qam128(4) 128-QAM
- qam32(5) 32-QAM
- qam64(6) 64-QAM
- qam4(7) 4-QAM
- qam8(8) 8-QAM
- qam256(9) 256-QAM
- qam512(10) 512-QAM
- qam1024(11) 1024-QAM
"
::= { xfRlPtpTerminalCapabilityEntry 2 }
xfTermMaxTribCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max number of tributaries"
::= { xfRlPtpTerminalCapabilityEntry 3 }
xfTermDCNCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DCN hop capacity"
::= { xfRlPtpTerminalCapabilityEntry 4 }
xfTermValidRow OBJECT-TYPE
SYNTAX INTEGER
{
vr0(0),
vr10(1),
vr25(2),
vr50(3),
vr100(4),
vr15(5),
vr30(6),
vr60(7),
vr125(8),
vr200(9),
vr350(10),
vr4(11),
vr500(12),
vr150(13),
vr250(14),
vr300(15),
vr400(16),
vr450(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max capacity license
- vr0(0) = invalid row
- vr10(1) = 10 Mbps, no license
- vr25(2) = 25 Mbps
- vr50(3) = 50 Mbps
- vr100(4) = 100 Mbps
- vr15(5) = 15 Mbps
- vr30(6) = 30 Mbps
- vr60(7) = 60 Mbps
- vr125(8) = 125 Mbps
- vr200(9) = 200 Mbps
- vr350(10) = 350 Mbps
- vr4(11) = 4 Mbps, no license
- vr500(12) = 500 Mbps
- vr150(13) = 150 Mbps
- vr250(14) = 250 Mbps
- vr300(15) = 300 Mbps
- vr400(16) = 400 Mbps
- vr450(17) = 450 Mbps
"
::= { xfRlPtpTerminalCapabilityEntry 5 }
xfTermMaxCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max capacity"
::= { xfRlPtpTerminalCapabilityEntry 6 }
xfTermSpectrumEfficiencyClassObsolete OBJECT-TYPE
SYNTAX TermRauSec
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"xfTermSpectrumEfficiencyClassObsolete"
::= { xfRlPtpTerminalCapabilityEntry 7 }
xfTermFrameFormatType OBJECT-TYPE
SYNTAX INTEGER
{
fftOther(0),
fftStatic(1),
fftAdmod(2),
fftXpic(3),
fftXpicAdmod(4),
fftLegacy(5),
fftStaticLH(6),
fftAdmodLH(7),
fftXpicLH(8),
fftXpicAdmodLH(9),
fftAdmodStatic(10),
fftXpicAdmodStatic(11),
fftAdmodStaticLH(12),
fftXpicAdmodStaticLH(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame format type
- fftOther(0)
- fftStatic(1)
- fftAdmod(2)
- fftXpic(3)
- fftXpicAdmod(4)
- fftLegacy(5)
- fftStaticLH(6)
- fftAdmodLH(7)
- fftXpicLH(8)
- fftXpicAdmodLH(9)
- fftAdmodStatic(10)
- fftXpicAdmodStatic(11)
- fftAdmodStaticLH(12)
- fftXpicAdmodStaticLH(13)
"
::= { xfRlPtpTerminalCapabilityEntry 8 }
xfTermFrameFormatRev OBJECT-TYPE
SYNTAX INTEGER
{
ffOther(1),
ffVersion0(2),
ffVersion1(3),
ffVersion2(4),
ffVersion3(5),
ffVersion4(6),
ffVersion5(7),
ffVersion6(8),
ffVersion7(9),
ffVersion8(10),
ffVersion9(11),
ffVersion10(12),
ffVersion11(13),
ffVersion12(14),
ffVersion13(15),
ffVersion14(16),
ffVersion15(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame format revision"
::= { xfRlPtpTerminalCapabilityEntry 9 }
xfTermBerAlarmThresholdCapability OBJECT-TYPE
SYNTAX BITS
{
berThrCap1e3(0),
berThrCap1e4(1),
berThrCap1e5(2),
berThrCap1e6(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of the allowed BER thresholds"
::= { xfRlPtpTerminalCapabilityEntry 10 }
------------------------------------------------------------------------------
-- xfRLPMAMConfigTable
------------------------------------------------------------------------------
xfRLPMAMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMAMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm threshold values for RL PM"
::= { xfRadioLinkPtpTerminalObjects 16 }
xfRLPMAMConfigEntry OBJECT-TYPE
SYNTAX XfRLPMAMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMAMConfigTable"
INDEX { ifIndex }
::= { xfRLPMAMConfigTable 1 }
XfRLPMAMConfigEntry ::=
SEQUENCE {
xfPMAMSetThreshold15m
Integer32,
xfPMAMSetThreshold24h
Integer32,
xfPMAMResetThreshold15m
Integer32,
xfPMAMStatus
BITS,
xfPMAMValidData
BITS
}
--
-- The xfRLPMAMConfigTable MOs
--
xfPMAMSetThreshold15m OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute set threshold for AdMod.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMAMConfigEntry 1 }
xfPMAMSetThreshold24h OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 24 hour set threshold for AdMod.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMAMConfigEntry 2 }
xfPMAMResetThreshold15m OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 15 minute reset threshold for AdMod.
Near end access: read-write
Far end access: No access
"
::= { xfRLPMAMConfigEntry 3 }
xfPMAMStatus OBJECT-TYPE
SYNTAX BITS
{
am15m1(0),
am15m2(1),
am15m3(2),
am24h1(3),
am24h2(4),
am24h3(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold alarm status"
::= { xfRLPMAMConfigEntry 4 }
xfPMAMValidData OBJECT-TYPE
SYNTAX BITS
{
valid15m4QAM(0),
valid15m8QAM(1),
valid15m16QAM(2),
valid15m32QAM(3),
valid15m64QAM(4),
valid15m128QAM(5),
valid15m256QAM(6),
valid15m512QAM(7),
valid15m1024QAM(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It reports which modulation's PM data that are valid."
::= { xfRLPMAMConfigEntry 5 }
------------------------------------------------------------------------------
-- xfRLPMAMCurrent24hTable
------------------------------------------------------------------------------
xfRLPMAMCurrent24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMAMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 17 }
xfRLPMAMCurrent24hEntry OBJECT-TYPE
SYNTAX XfRLPMAMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMAMCurrent24hTable."
INDEX { ifIndex }
::= { xfRLPMAMCurrent24hTable 1 }
XfRLPMAMCurrent24hEntry ::=
SEQUENCE {
xfPMAMCurrent24h4QAM
PerfCurrentCount,
xfPMAMCurrent24h8QAM
PerfCurrentCount,
xfPMAMCurrent24h16QAM
PerfCurrentCount,
xfPMAMCurrent24h32QAM
PerfCurrentCount,
xfPMAMCurrent24h64QAM
PerfCurrentCount,
xfPMAMCurrent24h128QAM
PerfCurrentCount,
xfPMAMCurrent24h256QAM
PerfCurrentCount,
xfPMAMCurrent24h512QAM
PerfCurrentCount,
xfPMAMCurrent24h1024QAM
PerfCurrentCount,
xfPMAMCurrent24h4QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h8QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h16QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h32QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h64QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h128QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h256QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h512QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent24h1024QAMEnRLB
PerfCurrentCount
}
--
-- The xfRLPMAMCurrent24hTable MOs
--
xfPMAMCurrent24h4QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 1 }
xfPMAMCurrent24h8QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 2 }
xfPMAMCurrent24h16QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 3 }
xfPMAMCurrent24h32QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 4 }
xfPMAMCurrent24h64QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 5 }
xfPMAMCurrent24h128QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 6 }
xfPMAMCurrent24h256QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 7 }
xfPMAMCurrent24h512QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 8 }
xfPMAMCurrent24h1024QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 9 }
xfPMAMCurrent24h4QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 10 }
xfPMAMCurrent24h8QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 11 }
xfPMAMCurrent24h16QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 12 }
xfPMAMCurrent24h32QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 13 }
xfPMAMCurrent24h64QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 14 }
xfPMAMCurrent24h128QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 15 }
xfPMAMCurrent24h256QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 16 }
xfPMAMCurrent24h512QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 17 }
xfPMAMCurrent24h1024QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid time since reset"
::= { xfRLPMAMCurrent24hEntry 18 }
------------------------------------------------------------------------------
-- xfRLPMAMInterval24hTable
------------------------------------------------------------------------------
xfRLPMAMInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMAMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 18 }
xfRLPMAMInterval24hEntry OBJECT-TYPE
SYNTAX XfRLPMAMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLPMAMInterval24hTable."
INDEX { ifIndex }
::= { xfRLPMAMInterval24hTable 1 }
XfRLPMAMInterval24hEntry ::=
SEQUENCE {
xfPMAMInterval24h4QAM
PerfIntervalCount,
xfPMAMInterval24h8QAM
PerfIntervalCount,
xfPMAMInterval24h16QAM
PerfIntervalCount,
xfPMAMInterval24h32QAM
PerfIntervalCount,
xfPMAMInterval24h64QAM
PerfIntervalCount,
xfPMAMInterval24h128QAM
PerfIntervalCount,
xfPMAMInterval24h256QAM
PerfIntervalCount,
xfPMAMInterval24h512QAM
PerfIntervalCount,
xfPMAMInterval24hValidData
TruthValue,
xfPMAMInterval24h1024QAM
PerfIntervalCount,
xfPMAMInterval24h4QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h8QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h16QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h32QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h64QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h128QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h256QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h512QAMEnRLB
PerfIntervalCount,
xfPMAMInterval24h1024QAMEnRLB
PerfIntervalCount
}
--
-- The xfRLPMAMInterval24hTable MOs
--
xfPMAMInterval24h4QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 1 }
xfPMAMInterval24h8QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 2 }
xfPMAMInterval24h16QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 3 }
xfPMAMInterval24h32QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 4 }
xfPMAMInterval24h64QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 5 }
xfPMAMInterval24h128QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 6 }
xfPMAMInterval24h256QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 7 }
xfPMAMInterval24h512QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 8 }
xfPMAMInterval24hValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLPMAMInterval24hEntry 9 }
xfPMAMInterval24h1024QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 10 }
xfPMAMInterval24h4QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 11 }
xfPMAMInterval24h8QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 12 }
xfPMAMInterval24h16QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 13 }
xfPMAMInterval24h32QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 14 }
xfPMAMInterval24h64QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 15 }
xfPMAMInterval24h128QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 16 }
xfPMAMInterval24h256QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 17 }
xfPMAMInterval24h512QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 18 }
xfPMAMInterval24h1024QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval24hEntry 19 }
------------------------------------------------------------------------------
-- xfRLPMAMCurrent15mTable
------------------------------------------------------------------------------
xfRLPMAMCurrent15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMAMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 19 }
xfRLPMAMCurrent15mEntry OBJECT-TYPE
SYNTAX XfRLPMAMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex }
::= { xfRLPMAMCurrent15mTable 1 }
XfRLPMAMCurrent15mEntry ::=
SEQUENCE {
xfPMAMCurrent15m4QAM
PerfCurrentCount,
xfPMAMCurrent15m8QAM
PerfCurrentCount,
xfPMAMCurrent15m16QAM
PerfCurrentCount,
xfPMAMCurrent15m32QAM
PerfCurrentCount,
xfPMAMCurrent15m64QAM
PerfCurrentCount,
xfPMAMCurrent15m128QAM
PerfCurrentCount,
xfPMAMCurrent15m256QAM
PerfCurrentCount,
xfPMAMCurrent15m512QAM
PerfCurrentCount,
xfPMAMCurrent15m1024QAM
PerfCurrentCount,
xfPMAMCurrent15m4QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m8QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m16QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m32QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m64QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m128QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m256QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m512QAMEnRLB
PerfCurrentCount,
xfPMAMCurrent15m1024QAMEnRLB
PerfCurrentCount
}
--
-- The xfRLPMAMCurrent15mTable MOs
--
xfPMAMCurrent15m4QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 1 }
xfPMAMCurrent15m8QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 2 }
xfPMAMCurrent15m16QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 3 }
xfPMAMCurrent15m32QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 4 }
xfPMAMCurrent15m64QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 5 }
xfPMAMCurrent15m128QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 6 }
xfPMAMCurrent15m256QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 7 }
xfPMAMCurrent15m512QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 8 }
xfPMAMCurrent15m1024QAM OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 9 }
xfPMAMCurrent15m4QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 10 }
xfPMAMCurrent15m8QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 11 }
xfPMAMCurrent15m16QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 12 }
xfPMAMCurrent15m32QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 13 }
xfPMAMCurrent15m64QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 14 }
xfPMAMCurrent15m128QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 15 }
xfPMAMCurrent15m256QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 16 }
xfPMAMCurrent15m512QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 17 }
xfPMAMCurrent15m1024QAMEnRLB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid interval time since reset.
"
::= { xfRLPMAMCurrent15mEntry 18 }
------------------------------------------------------------------------------
-- xfRLPMAMInterval15mTable
------------------------------------------------------------------------------
xfRLPMAMInterval15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMAMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 20 }
xfRLPMAMInterval15mEntry OBJECT-TYPE
SYNTAX XfRLPMAMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex, xfPMAMInterval15mIntervalNumber }
::= { xfRLPMAMInterval15mTable 1 }
XfRLPMAMInterval15mEntry ::=
SEQUENCE {
xfPMAMInterval15mIntervalNumber
Integer32,
xfPMAMInterval15m4QAM
PerfIntervalCount,
xfPMAMInterval15m8QAM
PerfIntervalCount,
xfPMAMInterval15m16QAM
PerfIntervalCount,
xfPMAMInterval15m32QAM
PerfIntervalCount,
xfPMAMInterval15m64QAM
PerfIntervalCount,
xfPMAMInterval15m128QAM
PerfIntervalCount,
xfPMAMInterval15m256QAM
PerfIntervalCount,
xfPMAMInterval15m512QAM
PerfIntervalCount,
xfPMAMInterval15mValidData
TruthValue,
xfPMAMInterval15m1024QAM
PerfIntervalCount,
xfPMAMInterval15m4QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m8QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m16QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m32QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m64QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m128QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m256QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m512QAMEnRLB
PerfIntervalCount,
xfPMAMInterval15m1024QAMEnRLB
PerfIntervalCount
}
--
-- The xfRLPMAMInterval15mTable MOs
--
xfPMAMInterval15mIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is the interval immediately preceding the one
identified by N-1."
::= { xfRLPMAMInterval15mEntry 1 }
xfPMAMInterval15m4QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 2 }
xfPMAMInterval15m8QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 3 }
xfPMAMInterval15m16QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 4 }
xfPMAMInterval15m32QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 5 }
xfPMAMInterval15m64QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 6 }
xfPMAMInterval15m128QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 7 }
xfPMAMInterval15m256QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 8 }
xfPMAMInterval15m512QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 9 }
xfPMAMInterval15mValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLPMAMInterval15mEntry 10 }
xfPMAMInterval15m1024QAM OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 11 }
xfPMAMInterval15m4QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 12 }
xfPMAMInterval15m8QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 13 }
xfPMAMInterval15m16QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 14 }
xfPMAMInterval15m32QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 15 }
xfPMAMInterval15m64QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 16 }
xfPMAMInterval15m128QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 17 }
xfPMAMInterval15m256QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 18 }
xfPMAMInterval15m512QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 19 }
xfPMAMInterval15m1024QAMEnRLB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval count."
::= { xfRLPMAMInterval15mEntry 20 }
------------------------------------------------------------------------------
-- xfRLPtpTerminalCapacityLicenseTable
------------------------------------------------------------------------------
xfRLPtpTerminalCapacityLicenseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPtpTerminalCapacityLicenseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TBD"
::= { xfRadioLinkPtpTerminalObjects 21 }
xfRLPtpTerminalCapacityLicenseEntry OBJECT-TYPE
SYNTAX XfRLPtpTerminalCapacityLicenseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { entLogicalIndex, xfTermRowIndex }
::= { xfRLPtpTerminalCapacityLicenseTable 1 }
XfRLPtpTerminalCapacityLicenseEntry ::=
SEQUENCE
{
xfTermCapacityLicenseRange INTEGER,
xfTermMaxCapacityRange Integer32,
xfTermMaxTribCapacityRange Integer32
}
--
-- The xfRLPtpTerminalCapacityLicenseTable MOs
--
xfTermCapacityLicenseRange OBJECT-TYPE
SYNTAX INTEGER
{
vr0(0),
vr10(1),
vr25(2),
vr50(3),
vr100(4),
vr15(5),
vr30(6),
vr60(7),
vr125(8),
vr200(9),
vr350(10),
vr4(11),
vr500(12),
vr150(13),
vr250(14),
vr300(15),
vr400(16),
vr450(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"xfTermCapacityLicenseRange"
::= { xfRLPtpTerminalCapacityLicenseEntry 1 }
xfTermMaxCapacityRange OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TermMaxCapacityRange"
::= { xfRLPtpTerminalCapacityLicenseEntry 2 }
xfTermMaxTribCapacityRange OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"xfTermMaxTribCapacityRange"
::= { xfRLPtpTerminalCapacityLicenseEntry 3 }
------------------------------------------------------------------------------
-- xfRLPMSDCGainCurrent15mTable
------------------------------------------------------------------------------
xfRLPMSDCGainCurrent15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMSDCGainCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table monitors the time spent in each SDC gain value in the current 15 minute period.
"
::= { xfRadioLinkPtpTerminalObjects 22 }
xfRLPMSDCGainCurrent15mEntry OBJECT-TYPE
SYNTAX XfRLPMSDCGainCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Entry in xfRLPMSDCGainCurrent15mTable.
"
INDEX { ifIndex }
::= { xfRLPMSDCGainCurrent15mTable 1 }
XfRLPMSDCGainCurrent15mEntry ::=
SEQUENCE
{
xfPMSDCGainCurrent15m0005dB
PerfCurrentCount,
xfPMSDCGainCurrent15m0510dB
PerfCurrentCount,
xfPMSDCGainCurrent15m1015dB
PerfCurrentCount,
xfPMSDCGainCurrent15m1520dB
PerfCurrentCount,
xfPMSDCGainCurrent15m2025dB
PerfCurrentCount,
xfPMSDCGainCurrent15m2530dB
PerfCurrentCount
}
--
-- xfRLPMSDCGainCurrent15mTable MOs
--
xfPMSDCGainCurrent15m0005dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 1 }
xfPMSDCGainCurrent15m0510dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 2 }
xfPMSDCGainCurrent15m1015dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 3 }
xfPMSDCGainCurrent15m1520dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 4 }
xfPMSDCGainCurrent15m2025dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 5 }
xfPMSDCGainCurrent15m2530dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
"
::= { xfRLPMSDCGainCurrent15mEntry 6 }
------------------------------------------------------------------------------
-- xfRLPMSDCGainInterval15mTable
------------------------------------------------------------------------------
xfRLPMSDCGainInterval15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMSDCGainInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table collects the time spent in each SDC gain value for the 15 minute intervals.
"
::= { xfRadioLinkPtpTerminalObjects 23 }
xfRLPMSDCGainInterval15mEntry OBJECT-TYPE
SYNTAX XfRLPMSDCGainInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Entry in xfRLPMSDCGainInterval15mTable.
"
INDEX { ifIndex, xfPMSDCGainInterval15mIntervalNumber }
::= { xfRLPMSDCGainInterval15mTable 1 }
XfRLPMSDCGainInterval15mEntry ::=
SEQUENCE
{
xfPMSDCGainInterval15mIntervalNumber
Integer32,
xfPMSDCGainInterval15m0005dB
PerfIntervalCount,
xfPMSDCGainInterval15m0510dB
PerfIntervalCount,
xfPMSDCGainInterval15m1015dB
PerfIntervalCount,
xfPMSDCGainInterval15m1520dB
PerfIntervalCount,
xfPMSDCGainInterval15m2025dB
PerfIntervalCount,
xfPMSDCGainInterval15m2530dB
PerfIntervalCount
}
--
-- xfRLPMSDCGainInterval15mTable MOs
--
xfPMSDCGainInterval15mIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
A number between 1 and 96, which identifies the interval for which the set of statistics is available.
The interval identified by 1 is the most recently completed 15 minute interval, and the interval
identified by N is the interval immediately preceding the one identified by N-1.
"
::= { xfRLPMSDCGainInterval15mEntry 1 }
xfPMSDCGainInterval15m0005dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 2 }
xfPMSDCGainInterval15m0510dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 3 }
xfPMSDCGainInterval15m1015dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 4 }
xfPMSDCGainInterval15m1520dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 5 }
xfPMSDCGainInterval15m2025dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 6 }
xfPMSDCGainInterval15m2530dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
"
::= { xfRLPMSDCGainInterval15mEntry 7 }
------------------------------------------------------------------------------
-- xfRLPMSDCGainCurrent24hTable
------------------------------------------------------------------------------
xfRLPMSDCGainCurrent24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMSDCGainCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table monitors the time spent in each SDC gain value in the current 24 hours period.
"
::= { xfRadioLinkPtpTerminalObjects 24 }
xfRLPMSDCGainCurrent24hEntry OBJECT-TYPE
SYNTAX XfRLPMSDCGainCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Entry in xfRLPMSDCGainCurrent24hTable.
"
INDEX { ifIndex }
::= { xfRLPMSDCGainCurrent24hTable 1 }
XfRLPMSDCGainCurrent24hEntry ::=
SEQUENCE
{
xfPMSDCGainCurrent24h0005dB
PerfCurrentCount,
xfPMSDCGainCurrent24h0510dB
PerfCurrentCount,
xfPMSDCGainCurrent24h1015dB
PerfCurrentCount,
xfPMSDCGainCurrent24h1520dB
PerfCurrentCount,
xfPMSDCGainCurrent24h2025dB
PerfCurrentCount,
xfPMSDCGainCurrent24h2530dB
PerfCurrentCount
}
--
-- xfRLPMSDCGainCurrent24hTable MOs
--
xfPMSDCGainCurrent24h0005dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 1 }
xfPMSDCGainCurrent24h0510dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 2 }
xfPMSDCGainCurrent24h1015dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 3 }
xfPMSDCGainCurrent24h1520dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 4 }
xfPMSDCGainCurrent24h2025dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 5 }
xfPMSDCGainCurrent24h2530dB OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
"
::= { xfRLPMSDCGainCurrent24hEntry 6 }
------------------------------------------------------------------------------
-- xfRLPMSDCGainInterval24hTable
------------------------------------------------------------------------------
xfRLPMSDCGainInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMSDCGainInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table collects the time spent in each SDC gain value for the 24 hours interval.
"
::= { xfRadioLinkPtpTerminalObjects 25 }
xfRLPMSDCGainInterval24hEntry OBJECT-TYPE
SYNTAX XfRLPMSDCGainInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Entry in xfRLPMSDCGainInterval24hTable.
"
INDEX { ifIndex }
::= { xfRLPMSDCGainInterval24hTable 1 }
XfRLPMSDCGainInterval24hEntry ::=
SEQUENCE
{
xfPMSDCGainInterval24h0005dB
PerfIntervalCount,
xfPMSDCGainInterval24h0510dB
PerfIntervalCount,
xfPMSDCGainInterval24h1015dB
PerfIntervalCount,
xfPMSDCGainInterval24h1520dB
PerfIntervalCount,
xfPMSDCGainInterval24h2025dB
PerfIntervalCount,
xfPMSDCGainInterval24h2530dB
PerfIntervalCount
}
--
-- xfRLPMSDCGainInterval24hTable MOs
--
xfPMSDCGainInterval24h0005dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 1 }
xfPMSDCGainInterval24h0510dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 2 }
xfPMSDCGainInterval24h1015dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 3 }
xfPMSDCGainInterval24h1520dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 4 }
xfPMSDCGainInterval24h2025dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 5 }
xfPMSDCGainInterval24h2530dB OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.
"
::= { xfRLPMSDCGainInterval24hEntry 6 }
------------------------------------------------------------------------------
-- xfRLPMSDCGainConfigTable
------------------------------------------------------------------------------
xfRLPMSDCGainConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLPMSDCGainConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables.
"
::= { xfRadioLinkPtpTerminalObjects 26 }
xfRLPMSDCGainConfigEntry OBJECT-TYPE
SYNTAX XfRLPMSDCGainConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Entry in xfRLPMSDCGainConfigTable.
"
INDEX { ifIndex }
::= { xfRLPMSDCGainConfigTable 1 }
XfRLPMSDCGainConfigEntry ::=
SEQUENCE
{
xfPMSDCGainSetThreshold15m
Integer32,
xfPMSDCGainSetThreshold24h
Integer32,
xfPMSDCGainResetThreshold15m
Integer32,
xfPMSDCGainStatus
BITS
}
--
-- xfRLPMSDCGainConfigTable MOs
--
xfPMSDCGainSetThreshold15m OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 180.
"
::= { xfRLPMSDCGainConfigEntry 1 }
xfPMSDCGainSetThreshold24h OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 1500.
"
::= { xfRLPMSDCGainConfigEntry 2 }
xfPMSDCGainResetThreshold15m OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 20.
"
::= { xfRLPMSDCGainConfigEntry 3 }
xfPMSDCGainStatus OBJECT-TYPE
SYNTAX BITS
{
sdcGain15m(0),
sdcGain24h(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Threshold crossing SDC alarm status.
"
::= { xfRLPMSDCGainConfigEntry 4 }
--
-- Extended Performance Tables --
--
--
-- xfRLExtRFPMConfigTable --
--
xfRLExtRFPMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRFPMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the alarm threshold values for RL Extended RF PM.
Its index id the RF IF ifIndex."
::= { xfRadioLinkPtpTerminalObjects 27 }
xfRLExtRFPMConfigEntry OBJECT-TYPE
SYNTAX XfRLExtRFPMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRFPMConfigTable."
INDEX { ifIndex } -- RF IF ifIndex
::= { xfRLExtRFPMConfigTable 1 }
XfRLExtRFPMConfigEntry ::=
SEQUENCE
{
xfExtRFPMRLTS1Threshold Integer32,
xfExtRFPMSetThreshold15mRLTS1 Integer32,
xfExtRFPMResetThreshold15mRLTS1 Integer32,
xfExtRFPMRLTS2Threshold Integer32,
xfExtRFPMSetThreshold15mRLTS2 Integer32,
xfExtRFPMResetThreshold15mRLTS2 Integer32,
xfExtRFPMSetThreshold15mRLTM Integer32,
xfExtRFPMResetThreshold15mRLTM Integer32,
xfExtRFPMTLTS1Threshold Integer32,
xfExtRFPMSetThreshold15mTLTS1 Integer32,
xfExtRFPMResetThreshold15mTLTS1 Integer32,
xfExtRFPMSetThreshold15mTLTM Integer32,
xfExtRFPMResetThreshold15mTLTM Integer32,
xfExtRFPMSetThreshold24hRLTS1 Integer32,
xfExtRFPMSetThreshold24hRLTS2 Integer32,
xfExtRFPMSetThreshold24hRLTM Integer32,
xfExtRFPMSetThreshold24hTLTS1 Integer32,
xfExtRFPMSetThreshold24hTLTM Integer32,
xfExtRFPMStatus BITS,
xfExtRFPMView INTEGER
}
--
-- The xfRLExtRFPMConfigTable MOs
--
xfExtRFPMRLTS1Threshold OBJECT-TYPE
SYNTAX Integer32 (-999..-201)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RLTS1 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.1 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always less than RLTS2, xfExtRFPMRLTS2Threshold."
DEFVAL {-999}
::= { xfRLExtRFPMConfigEntry 1 }
xfExtRFPMSetThreshold15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Always greater than alarm Reset, xfExtRFPMResetThreshold15mRLTS1."
DEFVAL {150}
::= { xfRLExtRFPMConfigEntry 2 }
xfExtRFPMResetThreshold15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute interval.
Always less than alarm Set, xfPMSetThreshold15mRLTS1."
DEFVAL {1}
::= { xfRLExtRFPMConfigEntry 3 }
xfExtRFPMRLTS2Threshold OBJECT-TYPE
SYNTAX Integer32 (-998..-200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RLTS2 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.8 ... -20.0 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always greater than RLTS1, xfExtRFPMRLTS1Threshold."
DEFVAL {-998}
::= { xfRLExtRFPMConfigEntry 4 }
xfExtRFPMSetThreshold15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTS2."
DEFVAL {180}
::= { xfRLExtRFPMConfigEntry 5 }
xfExtRFPMResetThreshold15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute interval.
Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTS2."
DEFVAL {20}
::= { xfRLExtRFPMConfigEntry 6 }
xfExtRFPMSetThreshold15mRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Input Power
in current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTM."
DEFVAL {800}
::= { xfRLExtRFPMConfigEntry 7 }
xfExtRFPMResetThreshold15mRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Input Power
for entire current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTM."
DEFVAL {790}
::= { xfRLExtRFPMConfigEntry 8 }
xfExtRFPMTLTS1Threshold OBJECT-TYPE
SYNTAX Integer32 (-100..45)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TLTS1 Alarm Threshold for Maximum RF Output Power.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset."
DEFVAL {45}
::= { xfRLExtRFPMConfigEntry 9 }
xfExtRFPMSetThreshold15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 15 minute interval.
Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTS1."
DEFVAL {180}
::= { xfRLExtRFPMConfigEntry 10 }
xfExtRFPMResetThreshold15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
for entire current 15 minute interval.
Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTS1."
DEFVAL {20}
::= { xfRLExtRFPMConfigEntry 11 }
xfExtRFPMSetThreshold15mTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Output Power
in current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTM."
DEFVAL {145}
::= { xfRLExtRFPMConfigEntry 12 }
xfExtRFPMResetThreshold15mTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Output Power
for entire current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTM."
DEFVAL {144}
::= { xfRLExtRFPMConfigEntry 13 }
xfExtRFPMSetThreshold24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval."
DEFVAL {20}
::= { xfRLExtRFPMConfigEntry 14 }
xfExtRFPMSetThreshold24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval."
DEFVAL {1500}
::= { xfRLExtRFPMConfigEntry 15 }
xfExtRFPMSetThreshold24hRLTM OBJECT-TYPE
SYNTAX Integer32 (10..800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Level Tide Mark (RLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Input Power
in current 24 hour interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]"
DEFVAL {800}
::= { xfRLExtRFPMConfigEntry 16 }
xfExtRFPMSetThreshold24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Levels 1 Threshold Second (TLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 24 hour interval."
DEFVAL {1500}
::= { xfRLExtRFPMConfigEntry 17 }
xfExtRFPMSetThreshold24hTLTM OBJECT-TYPE
SYNTAX Integer32 (1..145)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitted Level Tide Mark (TLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Output Power
in current 24 hour interval.
RF output level = value dB.
Domain: [1 ... 145 dB]"
DEFVAL {145}
::= { xfRLExtRFPMConfigEntry 18 }
xfExtRFPMStatus OBJECT-TYPE
SYNTAX BITS
{
rlts1Counter15m0(0),
rlts1Counter15m1(1),
rlts1Counter15m2(2),
rlts2Counter15m0(3),
rlts2Counter15m1(4),
rlts2Counter15m2(5),
rltmCounter15m0(6),
rltmCounter15m1(7),
rltmCounter15m2(8),
tlts1Counter15m0(9),
tlts1Counter15m1(10),
tlts1Counter15m2(11),
tltmCounter15m0(12),
tltmCounter15m1(13),
tltmCounter15m2(14),
rlts1Counter24h0(15),
rlts1Counter24h1(16),
rlts1Counter24h2(17),
rlts2Counter24h0(18),
rlts2Counter24h1(19),
rlts2Counter24h2(20),
rltmCounter24h0(21),
rltmCounter24h1(22),
rltmCounter24h2(23),
tlts1Counter24h0(24),
tlts1Counter24h1(25),
tlts1Counter24h2(26),
tltmCounter24h0(27),
tltmCounter24h1(28),
tltmCounter24h2(29)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Threshold alarm status"
::= { xfRLExtRFPMConfigEntry 19 }
xfExtRFPMView OBJECT-TYPE
SYNTAX INTEGER
{
extPmEnable(1),
extPmDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable/disable visibility of PM tables.
Default value: extPmEnable(1)
Near end access: read-write
Far end access: No access
"
::= { xfRLExtRFPMConfigEntry 20 }
--
-- xfRLExtRFPMCurrent24hTable
--
xfRLExtRFPMCurrent24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRFPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current 24h Extended RF PM table.
Its index is RF IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 28 }
xfRLExtRFPMCurrent24hEntry OBJECT-TYPE
SYNTAX XfRLExtRFPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRFPMCurrent24hTable."
INDEX { ifIndex } --RF IF ifIndex
::= { xfRLExtRFPMCurrent24hTable 1 }
XfRLExtRFPMCurrent24hEntry ::=
SEQUENCE
{
xfExtRFPMCurrent24hElapsedTime Counter32,
xfExtRFPMCurrent24hRLTS1 Integer32,
xfExtRFPMCurrent24hRLTS2 Integer32,
xfExtRFPMCurrent24hRLMin Integer32,
xfExtRFPMCurrent24hRLMax Integer32,
xfExtRFPMCurrent24hTLTS1 Integer32,
xfExtRFPMCurrent24hTLMin Integer32,
xfExtRFPMCurrent24hTLMax Integer32
}
--
-- The xfRLExtRFPMCurrent24hTable MOs
--
xfExtRFPMCurrent24hElapsedTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the
beginning of the current error-measurement period.
If the current interval exceeds the maximum value,
the agent will return the maximum value.
"
::= { xfRLExtRFPMCurrent24hEntry 1 }
xfExtRFPMCurrent24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the current 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 2 }
xfExtRFPMCurrent24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the current 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 3 }
xfExtRFPMCurrent24hRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in current 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 4 }
xfExtRFPMCurrent24hRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in current 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 5 }
xfExtRFPMCurrent24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the current 24 hour interval
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 6 }
xfExtRFPMCurrent24hTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in current 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 7 }
xfExtRFPMCurrent24hTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in current 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent24hEntry 8 }
--
-- xfRLExtRFPMInterval24hTable
--
xfRLExtRFPMInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRFPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interval 24h Extended RF PM table.
Its index is RF IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 29 }
xfRLExtRFPMInterval24hEntry OBJECT-TYPE
SYNTAX XfRLExtRFPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRFPMInterval24hTable."
INDEX { ifIndex } -- RF IF ifIndex
::= { xfRLExtRFPMInterval24hTable 1 }
XfRLExtRFPMInterval24hEntry ::=
SEQUENCE
{
xfExtRFPMInterval24hRLTS1 Integer32,
xfExtRFPMInterval24hRLTS2 Integer32,
xfExtRFPMInterval24hRLMin Integer32,
xfExtRFPMInterval24hRLMax Integer32,
xfExtRFPMInterval24hTLTS1 Integer32,
xfExtRFPMInterval24hTLMin Integer32,
xfExtRFPMInterval24hTLMax Integer32,
xfExtRFPMInterval24hValidData TruthValue
}
--
-- The xfRLExtRFPMInterval24hTable MOs
--
xfExtRFPMInterval24hRLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the previous 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 1 }
xfExtRFPMInterval24hRLTS2 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the previous 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 2 }
xfExtRFPMInterval24hRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 3 }
xfExtRFPMInterval24hRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 4 }
xfExtRFPMInterval24hTLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the previous 24 hour interval
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 5 }
xfExtRFPMInterval24hTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 6 }
xfExtRFPMInterval24hTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval24hEntry 7 }
xfExtRFPMInterval24hValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLExtRFPMInterval24hEntry 8 }
--
-- xfRLExtRFPMCurrent15mTable
--
xfRLExtRFPMCurrent15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRFPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current 15m Extended RF PM table.
Its index is RF IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 30 }
xfRLExtRFPMCurrent15mEntry OBJECT-TYPE
SYNTAX XfRLExtRFPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex } -- RF IF ifIndex
::= { xfRLExtRFPMCurrent15mTable 1 }
XfRLExtRFPMCurrent15mEntry ::=
SEQUENCE
{
xfExtRFPMCurrent15mElapsedTime Counter32,
xfExtRFPMCurrent15mRLTS1 Integer32,
xfExtRFPMCurrent15mRLTS2 Integer32,
xfExtRFPMCurrent15mRLMin Integer32,
xfExtRFPMCurrent15mRLMax Integer32,
xfExtRFPMCurrent15mTLTS1 Integer32,
xfExtRFPMCurrent15mTLMin Integer32,
xfExtRFPMCurrent15mTLMax Integer32
}
--
-- The xfRLExtRFPMCurrent15mTable MOs
--
xfExtRFPMCurrent15mElapsedTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current error-measurement period.
"
::= { xfRLExtRFPMCurrent15mEntry 1 }
xfExtRFPMCurrent15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the current 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 2 }
xfExtRFPMCurrent15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the current 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 3 }
xfExtRFPMCurrent15mRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in current 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 4 }
xfExtRFPMCurrent15mRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in current 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 5 }
xfExtRFPMCurrent15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 15 minute
Number of seconds that the RF Output Power was above the TLTS1
in the current 15 minute interval
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 6 }
xfExtRFPMCurrent15mTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in current 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 7 }
xfExtRFPMCurrent15mTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in current 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMCurrent15mEntry 8 }
--
-- xfRLExtRFPMInterval15mTable
--
xfRLExtRFPMInterval15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRFPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interval 15m Extended RF PM table.
Its index is RF IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 31 }
xfRLExtRFPMInterval15mEntry OBJECT-TYPE
SYNTAX XfRLExtRFPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { ifIndex, xfExtRFPMInterval15mIntervalNumber } -- RF IF ifIndex
::= { xfRLExtRFPMInterval15mTable 1 }
XfRLExtRFPMInterval15mEntry ::=
SEQUENCE
{
xfExtRFPMInterval15mIntervalNumber Integer32,
xfExtRFPMInterval15mRLTS1 Integer32,
xfExtRFPMInterval15mRLTS2 Integer32,
xfExtRFPMInterval15mRLMin Integer32,
xfExtRFPMInterval15mRLMax Integer32,
xfExtRFPMInterval15mTLTS1 Integer32,
xfExtRFPMInterval15mTLMin Integer32,
xfExtRFPMInterval15mTLMax Integer32,
xfExtRFPMInterval15mValidData TruthValue
}
--
-- The xfRLExtRFPMInterval15mTable MOs
--
xfExtRFPMInterval15mIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is the interval immediately preceding the one
identified by N-1."
::= { xfRLExtRFPMInterval15mEntry 1 }
xfExtRFPMInterval15mRLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the previous 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 2 }
xfExtRFPMInterval15mRLTS2 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the previous 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 3 }
xfExtRFPMInterval15mRLMin OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 4 }
xfExtRFPMInterval15mRLMax OBJECT-TYPE
SYNTAX Integer32 (-999..-200|0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 5 }
xfExtRFPMInterval15mTLTS1 OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Level 1 Threshold Second (TLTS1) 15 minute
Number of seconds that the RF Output Power was above the TLTS1
in the previous 15 minute interval
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 6 }
xfExtRFPMInterval15mTLMin OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 7 }
xfExtRFPMInterval15mTLMax OBJECT-TYPE
SYNTAX Integer32 (-100..45|255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRFPMInterval15mEntry 8 }
xfExtRFPMInterval15mValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is valid."
::= { xfRLExtRFPMInterval15mEntry 9 }
--
-- xfRLExtRAUPMCurrent24hTable
--
xfRLExtRAUPMCurrent24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRAUPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current 24h Extended RAU PM table.
Its index is RAU IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 32 }
xfRLExtRAUPMCurrent24hEntry OBJECT-TYPE
SYNTAX XfRLExtRAUPMCurrent24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRAUPMCurrent24hTable."
INDEX { ifIndex } --RAU IF ifIndex
::= { xfRLExtRAUPMCurrent24hTable 1 }
XfRLExtRAUPMCurrent24hEntry ::=
SEQUENCE {
xfExtRAUPMCurrent24hElapsedTime Counter32,
xfExtRAUPMCurrent24hMSEMin Integer32,
xfExtRAUPMCurrent24hMSEMax Integer32,
xfExtRAUPMCurrent24hXPIMin Integer32,
xfExtRAUPMCurrent24hXPIMax Integer32
}
--
-- The xfRLExtRAUPMCurrent24hTable MOs
--
xfExtRAUPMCurrent24hElapsedTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the
beginning of the current error-measurement period.
If the current interval exceeds the maximum value,
the agent will return the maximum value.
"
::= { xfRLExtRAUPMCurrent24hEntry 1 }
xfExtRAUPMCurrent24hMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent24hEntry 2 }
xfExtRAUPMCurrent24hMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent24hEntry 3 }
xfExtRAUPMCurrent24hXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent24hEntry 4 }
xfExtRAUPMCurrent24hXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in current 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent24hEntry 5 }
--
-- xfRLExtRAUPMInterval24hTable
--
xfRLExtRAUPMInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRAUPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interval 24h Extended RAU PM table.
Its index is RAU IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 33 }
xfRLExtRAUPMInterval24hEntry OBJECT-TYPE
SYNTAX XfRLExtRAUPMInterval24hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRAUPMInterval24hTable."
INDEX { ifIndex } -- RAU IF ifIndex
::= { xfRLExtRAUPMInterval24hTable 1 }
XfRLExtRAUPMInterval24hEntry ::=
SEQUENCE {
xfExtRAUPMInterval24hMSEMin Integer32,
xfExtRAUPMInterval24hMSEMax Integer32,
xfExtRAUPMInterval24hXPIMin Integer32,
xfExtRAUPMInterval24hXPIMax Integer32,
xfExtRAUPMInterval24hValidData TruthValue
}
--
-- The xfRLExtRAUPMInterval24hTable MOs
--
xfExtRAUPMInterval24hMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval24hEntry 1 }
xfExtRAUPMInterval24hMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval24hEntry 2 }
xfExtRAUPMInterval24hXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval24hEntry 3 }
xfExtRAUPMInterval24hXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval24hEntry 4 }
xfExtRAUPMInterval24hValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLExtRAUPMInterval24hEntry 5 }
--
-- xfRLExtRAUPMCurrent15mTable --
--
xfRLExtRAUPMCurrent15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRAUPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current 15m Extended RAU PM table.
Its index is RF IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 34 }
xfRLExtRAUPMCurrent15mEntry OBJECT-TYPE
SYNTAX XfRLExtRAUPMCurrent15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRAUPMCurrent15mTable."
INDEX { ifIndex } --RAU IF ifIndex
::= { xfRLExtRAUPMCurrent15mTable 1 }
XfRLExtRAUPMCurrent15mEntry ::=
SEQUENCE {
xfExtRAUPMCurrent15mElapsedTime Counter32,
xfExtRAUPMCurrent15mMSEMin Integer32,
xfExtRAUPMCurrent15mMSEMax Integer32,
xfExtRAUPMCurrent15mXPIMin Integer32,
xfExtRAUPMCurrent15mXPIMax Integer32
}
--
-- The xfRLExtRAUPMInterval15mTable MOs
--
xfExtRAUPMCurrent15mElapsedTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the
beginning of the current error-measurement period.
If the current interval exceeds the maximum value,
the agent will return the maximum value.
"
::= { xfRLExtRAUPMCurrent15mEntry 1 }
xfExtRAUPMCurrent15mMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in current 15 mimute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent15mEntry 2 }
xfExtRAUPMCurrent15mMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in current 15 mimute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent15mEntry 3 }
xfExtRAUPMCurrent15mXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in current 15 mimute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent15mEntry 4 }
xfExtRAUPMCurrent15mXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in current 15 mimute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMCurrent15mEntry 5 }
--
-- xfRLExtRAUPMInterval15mTable
--
xfRLExtRAUPMInterval15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfRLExtRAUPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interval 15 Extended RAU PM table.
Its index is RAU IF ifIndex"
::= { xfRadioLinkPtpTerminalObjects 35 }
xfRLExtRAUPMInterval15mEntry OBJECT-TYPE
SYNTAX XfRLExtRAUPMInterval15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the xfRLExtRAUPMInterval15mTable."
INDEX { ifIndex, xfExtRAUPMInterval15mIntervalNumber} -- RAU IF ifIndex
::= { xfRLExtRAUPMInterval15mTable 1 }
XfRLExtRAUPMInterval15mEntry ::=
SEQUENCE
{
xfExtRAUPMInterval15mIntervalNumber Integer32,
xfExtRAUPMInterval15mMSEMin Integer32,
xfExtRAUPMInterval15mMSEMax Integer32,
xfExtRAUPMInterval15mXPIMin Integer32,
xfExtRAUPMInterval15mXPIMax Integer32,
xfExtRAUPMInterval15mValidData TruthValue
}
--
-- The xfRLExtRAUPMInterval15mTable MOs
--
xfExtRAUPMInterval15mIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is the interval immediately preceding the one
identified by N-1."
::= { xfRLExtRAUPMInterval15mEntry 1 }
xfExtRAUPMInterval15mMSEMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval15mEntry 2 }
xfExtRAUPMInterval15mMSEMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval15mEntry 3 }
xfExtRAUPMInterval15mXPIMin OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Min Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval15mEntry 4 }
xfExtRAUPMInterval15mXPIMax OBJECT-TYPE
SYNTAX Integer32 (-1000..1000|2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate Max Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X
* xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002"
::= { xfRLExtRAUPMInterval15mEntry 5 }
xfExtRAUPMInterval15mValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the data
for this interval is valid."
::= { xfRLExtRAUPMInterval15mEntry 6 }
--
-- Conformance
--
xfRadioLinkPtpTerminalCompliances OBJECT IDENTIFIER
::= { xfRadioLinkPtpTerminalConformance 1 }
xfRadioLinkPtpTerminalGroups OBJECT IDENTIFIER
::= { xfRadioLinkPtpTerminalConformance 2 }
xfRadioLinkPtpTerminalFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement everything."
MODULE -- This Module
MANDATORY-GROUPS { xfRadioLinkPtpTerminalCompleteGroup }
::= { xfRadioLinkPtpTerminalCompliances 1 }
xfRadioLinkPtpTerminalCompleteGroup OBJECT-GROUP
OBJECTS
{
xfTermId,
xfTermType,
xfTermProtection,
xfTermCapacity,
xfTermCapacityCapability,
xfTermModulation,
xfTermModulationCapability,
xfTermRestore,
xfTermAlarmSeverity,
xfTermTrapEnable,
xfTermAsPort,
xfTermRemoteIdCheck,
xfTermRemoteId,
xfTermPreset,
xfTermBerAlarmThreshold,
xfTermFadeNotificationTimer,
xfTermEquipmentProtectionIndex,
xfTermSysName,
xfTermChannelMode,
xfTermChannelModeCapability,
xfTermTrafficAndDCN,
xfTermFrameFormat,
xfTermFrameFormatCapability,
xfTermDCNRadioConfiguration,
xfTermDCNRadioCapability,
xfTermDCNLineConfiguration,
xfTermDCNLineCapability,
xfTermFadeNotificationConfiguration,
xfTermLineProtection,
xfTermOutputPowerOperStatus,
xfTermOutputPowerAdminStatus,
xfTermAtpcCapability,
xfTermTimeElapsed,
xfTermCurrentES,
xfTermCurrentSES,
xfTermCurrentBBE,
xfTermCurrentUAS,
xfTermCurrentBB,
xfTermPerfReset,
xfTermTimeElapsedEnRLBExt,
xfRLProtectionMode,
xfRLProtectionRau1,
xfRLProtectionRau2,
xfRLActiveTxRadio,
xfRLSwitchOverReset,
xfRLSwitchRevertiveTx,
xfRLProtectionCapability,
xfRLTxSwitchOverConfiguration,
xfRLLineProtectionStatus,
xfRLLineProtectionMode,
xfRADIORSAlarms,
xfRADIORSPerformanceAlarms,
xfPMSetThreshold15mESs,
xfPMSetThreshold15mSESs,
xfPMSetThreshold15mBBEs,
xfPMResetThreshold15mESs,
xfPMResetThreshold15mSESs,
xfPMResetThreshold15mBBEs,
xfPMSetThreshold24hESs,
xfPMSetThreshold24hSESs,
xfPMSetThreshold24hBBEs,
xfPMView,
xfPMStatus,
xfPMCurrent24hTimeElapsed,
xfPMCurrent24hESs,
xfPMCurrent24hSESs,
xfPMCurrent24hBBEs,
xfPMCurrent24hUASs,
xfPMCurrent24hBBs,
xfPMInterval24hESs,
xfPMInterval24hSESs,
xfPMInterval24hBBEs,
xfPMInterval24hUASs,
xfPMInterval24hBBs,
xfPMInterval24hRLTS1,
xfPMInterval24hRLTS2,
xfPMInterval24hRLMin,
xfPMInterval24hRLMax,
xfPMInterval24hTLTS1,
xfPMInterval24hTLMin,
xfPMInterval24hTLMax,
xfPMInterval24hMSEMin,
xfPMInterval24hMSEMax,
xfPMInterval24hXPIMin,
xfPMInterval24hXPIMax,
xfPMInterval24hValidData,
xfPMCurrent15mElapsedTime,
xfPMCurrent15mESs,
xfPMCurrent15mSESs,
xfPMCurrent15mBBEs,
xfPMCurrent15mUASs,
xfPMCurrent15mBBs,
xfPMInterval15mIntervalNumber,
xfPMInterval15mESs,
xfPMInterval15mSESs,
xfPMInterval15mBBEs,
xfPMInterval15mUASs,
xfPMInterval15mBBs,
xfPMInterval15mRLTS1,
xfPMInterval15mRLTS2,
xfPMInterval15mRLMin,
xfPMInterval15mRLMax,
xfPMInterval15mTLTS1,
xfPMInterval15mTLMin,
xfPMInterval15mTLMax,
xfPMInterval15mMSEMin,
xfPMInterval15mMSEMax,
xfPMInterval15mXPIMin,
xfPMInterval15mXPIMax,
xfPMInterval15mValidData,
xfTermInterfaces,
xfTermInterfacesCapability,
xfTermChannelModeOperStatus,
xfTermXPICRestore,
xfTermTribCapacityActual,
xfTermTribCapacityDesired,
xfTermBitPipeCapacity,
xfTermRowIndex,
xfTermCapabilitiesLastChange,
xfTermActualRowIndex,
xfTermMaxRowIndex,
xfTermAdaptiveManualRowIndex,
xfTermAdaptiveManualMode,
xfTermSpectrumEfficiencyClass,
xfTermSpectrumEfficiencyClassCapability,
xfTermChannelSpacing,
xfTermChannelModulation,
xfTermMaxTribCapacity,
xfTermDCNCapacity,
xfTermValidRow,
xfTermMaxCapacity,
xfTermFrameFormatType,
xfTermFrameFormatRev,
xfTermBerAlarmThresholdCapability,
xfPMAMSetThreshold15m,
xfPMAMSetThreshold24h,
xfPMAMResetThreshold15m,
xfPMAMStatus,
xfPMAMValidData,
xfPMAMCurrent24h4QAM,
xfPMAMCurrent24h8QAM,
xfPMAMCurrent24h16QAM,
xfPMAMCurrent24h32QAM,
xfPMAMCurrent24h64QAM,
xfPMAMCurrent24h128QAM,
xfPMAMCurrent24h256QAM,
xfPMAMCurrent24h512QAM,
xfPMAMCurrent24h1024QAM,
xfPMAMInterval24h4QAM,
xfPMAMInterval24h8QAM,
xfPMAMInterval24h16QAM,
xfPMAMInterval24h32QAM,
xfPMAMInterval24h64QAM,
xfPMAMInterval24h128QAM,
xfPMAMInterval24h256QAM,
xfPMAMInterval24h512QAM,
xfPMAMInterval24hValidData,
xfPMAMInterval24h1024QAM,
xfPMAMCurrent15m4QAM,
xfPMAMCurrent15m8QAM,
xfPMAMCurrent15m16QAM,
xfPMAMCurrent15m32QAM,
xfPMAMCurrent15m64QAM,
xfPMAMCurrent15m128QAM,
xfPMAMCurrent15m256QAM,
xfPMAMCurrent15m512QAM,
xfPMAMCurrent15m1024QAM,
xfPMAMInterval15mIntervalNumber,
xfPMAMInterval15m4QAM,
xfPMAMInterval15m8QAM,
xfPMAMInterval15m16QAM,
xfPMAMInterval15m32QAM,
xfPMAMInterval15m64QAM,
xfPMAMInterval15m128QAM,
xfPMAMInterval15m256QAM,
xfPMAMInterval15m512QAM,
xfPMAMInterval15mValidData,
xfPMAMInterval15m1024QAM,
xfPMAMCurrent24h4QAMEnRLB,
xfPMAMCurrent24h8QAMEnRLB,
xfPMAMCurrent24h16QAMEnRLB,
xfPMAMCurrent24h32QAMEnRLB,
xfPMAMCurrent24h64QAMEnRLB,
xfPMAMCurrent24h128QAMEnRLB,
xfPMAMCurrent24h256QAMEnRLB,
xfPMAMCurrent24h512QAMEnRLB,
xfPMAMCurrent24h1024QAMEnRLB,
xfPMAMInterval24h4QAMEnRLB,
xfPMAMInterval24h8QAMEnRLB,
xfPMAMInterval24h16QAMEnRLB,
xfPMAMInterval24h32QAMEnRLB,
xfPMAMInterval24h64QAMEnRLB,
xfPMAMInterval24h128QAMEnRLB,
xfPMAMInterval24h256QAMEnRLB,
xfPMAMInterval24h512QAMEnRLB,
xfPMAMInterval24h1024QAMEnRLB,
xfPMAMCurrent15m4QAMEnRLB,
xfPMAMCurrent15m8QAMEnRLB,
xfPMAMCurrent15m16QAMEnRLB,
xfPMAMCurrent15m32QAMEnRLB,
xfPMAMCurrent15m64QAMEnRLB,
xfPMAMCurrent15m128QAMEnRLB,
xfPMAMCurrent15m256QAMEnRLB,
xfPMAMCurrent15m512QAMEnRLB,
xfPMAMCurrent15m1024QAMEnRLB,
xfPMAMInterval15m4QAMEnRLB,
xfPMAMInterval15m8QAMEnRLB,
xfPMAMInterval15m16QAMEnRLB,
xfPMAMInterval15m32QAMEnRLB,
xfPMAMInterval15m64QAMEnRLB,
xfPMAMInterval15m128QAMEnRLB,
xfPMAMInterval15m256QAMEnRLB,
xfPMAMInterval15m512QAMEnRLB,
xfPMAMInterval15m1024QAMEnRLB,
xfTermIpAddress,
xfTermProtectionCapability,
xfTermLineProtectionCapability,
xfTermTribAllocationActual,
xfTermTribAllocationDesired,
xfTermAutoRemoveLoopEnable,
xfTermCapability,
xfTermCapacityLicense,
xfTermCapacityLicenseRange,
xfTermMaxCapacityRange,
xfTermMaxTribCapacityRange,
xfTermFadingRates,
xfTermFadingRatesCapability,
xfTermConfiguredBitPipeCapacity,
xfTermTribCapacityConfigured,
xfTermPacketMaxCapacity,
xfTermPacketMinCapacity,
xfPMSDCGainCurrent15m0005dB,
xfPMSDCGainCurrent15m0510dB,
xfPMSDCGainCurrent15m1015dB,
xfPMSDCGainCurrent15m1520dB,
xfPMSDCGainCurrent15m2025dB,
xfPMSDCGainCurrent15m2530dB,
xfPMSDCGainInterval15mIntervalNumber,
xfPMSDCGainInterval15m0005dB,
xfPMSDCGainInterval15m0510dB,
xfPMSDCGainInterval15m1015dB,
xfPMSDCGainInterval15m1520dB,
xfPMSDCGainInterval15m2025dB,
xfPMSDCGainInterval15m2530dB,
xfPMSDCGainCurrent24h0005dB,
xfPMSDCGainCurrent24h0510dB,
xfPMSDCGainCurrent24h1015dB,
xfPMSDCGainCurrent24h1520dB,
xfPMSDCGainCurrent24h2025dB,
xfPMSDCGainCurrent24h2530dB,
xfPMSDCGainInterval24h0005dB,
xfPMSDCGainInterval24h0510dB,
xfPMSDCGainInterval24h1015dB,
xfPMSDCGainInterval24h1520dB,
xfPMSDCGainInterval24h2025dB,
xfPMSDCGainInterval24h2530dB,
xfPMSDCGainSetThreshold15m,
xfPMSDCGainSetThreshold24h,
xfPMSDCGainResetThreshold15m,
xfPMSDCGainStatus,
xfPMRLTS1Threshold,
xfPMSetThreshold15mRLTS1,
xfPMResetThreshold15mRLTS1,
xfPMRLTS2Threshold,
xfPMSetThreshold15mRLTS2,
xfPMResetThreshold15mRLTS2,
xfPMSetThreshold15mRLTM,
xfPMResetThreshold15mRLTM,
xfPMTLTS1Threshold,
xfPMSetThreshold15mTLTS1,
xfPMResetThreshold15mTLTS1,
xfPMSetThreshold15mTLTM,
xfPMResetThreshold15mTLTM,
xfPMSetThreshold24hRLTS1,
xfPMSetThreshold24hRLTS2,
xfPMSetThreshold24hRLTM,
xfPMSetThreshold24hTLTS1,
xfPMSetThreshold24hTLTM,
xfPMCurrent24hRLTS1,
xfPMCurrent24hRLTS2,
xfPMCurrent24hRLMin,
xfPMCurrent24hRLMax,
xfPMCurrent24hTLTS1,
xfPMCurrent24hTLMin,
xfPMCurrent24hTLMax,
xfPMCurrent24hMSEMin,
xfPMCurrent24hMSEMax,
xfPMCurrent24hXPIMin,
xfPMCurrent24hXPIMax,
xfPMCurrent15mRLTS1,
xfPMCurrent15mRLTS2,
xfPMCurrent15mRLMin,
xfPMCurrent15mRLMax,
xfPMCurrent15mTLTS1,
xfPMCurrent15mTLMin,
xfPMCurrent15mTLMax,
xfPMCurrent15mMSEMin,
xfPMCurrent15mMSEMax,
xfPMCurrent15mXPIMin,
xfPMCurrent15mXPIMax,
xfPMCurrent15mESR,
xfPMCurrent15mSESR,
xfPMCurrent15mBBER,
xfPMCurrent24hESR,
xfPMCurrent24hSESR,
xfPMCurrent24hBBER,
-- Extended PM
xfExtRFPMRLTS1Threshold,
xfExtRFPMSetThreshold15mRLTS1,
xfExtRFPMResetThreshold15mRLTS1,
xfExtRFPMRLTS2Threshold,
xfExtRFPMSetThreshold15mRLTS2,
xfExtRFPMResetThreshold15mRLTS2,
xfExtRFPMSetThreshold15mRLTM,
xfExtRFPMResetThreshold15mRLTM,
xfExtRFPMTLTS1Threshold,
xfExtRFPMSetThreshold15mTLTS1,
xfExtRFPMResetThreshold15mTLTS1,
xfExtRFPMSetThreshold15mTLTM,
xfExtRFPMResetThreshold15mTLTM,
xfExtRFPMSetThreshold24hRLTS1,
xfExtRFPMSetThreshold24hRLTS2,
xfExtRFPMSetThreshold24hRLTM,
xfExtRFPMSetThreshold24hTLTS1,
xfExtRFPMSetThreshold24hTLTM,
xfExtRFPMStatus,
xfExtRFPMView,
xfExtRFPMCurrent24hElapsedTime,
xfExtRFPMCurrent24hRLTS1,
xfExtRFPMCurrent24hRLTS2,
xfExtRFPMCurrent24hRLMin,
xfExtRFPMCurrent24hRLMax,
xfExtRFPMCurrent24hTLTS1,
xfExtRFPMCurrent24hTLMin,
xfExtRFPMCurrent24hTLMax,
xfExtRFPMInterval24hRLTS1,
xfExtRFPMInterval24hRLTS2,
xfExtRFPMInterval24hRLMin,
xfExtRFPMInterval24hRLMax,
xfExtRFPMInterval24hTLTS1,
xfExtRFPMInterval24hTLMin,
xfExtRFPMInterval24hTLMax,
xfExtRFPMInterval24hValidData,
xfExtRFPMCurrent15mElapsedTime,
xfExtRFPMCurrent15mRLTS1,
xfExtRFPMCurrent15mRLTS2,
xfExtRFPMCurrent15mRLMin,
xfExtRFPMCurrent15mRLMax,
xfExtRFPMCurrent15mTLTS1,
xfExtRFPMCurrent15mTLMin,
xfExtRFPMCurrent15mTLMax,
xfExtRFPMInterval15mIntervalNumber,
xfExtRFPMInterval15mRLTS1,
xfExtRFPMInterval15mRLTS2,
xfExtRFPMInterval15mRLMin,
xfExtRFPMInterval15mRLMax,
xfExtRFPMInterval15mTLTS1,
xfExtRFPMInterval15mTLMin,
xfExtRFPMInterval15mTLMax,
xfExtRFPMInterval15mValidData,
xfExtRAUPMCurrent24hElapsedTime,
xfExtRAUPMCurrent24hMSEMin,
xfExtRAUPMCurrent24hMSEMax,
xfExtRAUPMCurrent24hXPIMin,
xfExtRAUPMCurrent24hXPIMax,
xfExtRAUPMInterval24hMSEMin,
xfExtRAUPMInterval24hMSEMax,
xfExtRAUPMInterval24hXPIMin,
xfExtRAUPMInterval24hXPIMax,
xfExtRAUPMInterval24hValidData,
xfExtRAUPMCurrent15mElapsedTime,
xfExtRAUPMCurrent15mMSEMin,
xfExtRAUPMCurrent15mMSEMax,
xfExtRAUPMCurrent15mXPIMin,
xfExtRAUPMCurrent15mXPIMax,
xfExtRAUPMInterval15mIntervalNumber,
xfExtRAUPMInterval15mMSEMin,
xfExtRAUPMInterval15mMSEMax,
xfExtRAUPMInterval15mXPIMin,
xfExtRAUPMInterval15mXPIMax,
xfExtRAUPMInterval15mValidData
}
STATUS current
DESCRIPTION
"A collection of all current objects in this MIB module."
::= { xfRadioLinkPtpTerminalGroups 1 }
xfRadioLinkPtpTerminalObsoleteGroup OBJECT-GROUP
OBJECTS
{
xfTermSpectrumEfficiencyClassObsolete
}
STATUS obsolete
DESCRIPTION
"A collection of all obsolete objects in this MIB module."
::= { xfRadioLinkPtpTerminalGroups 2 }
END
Reference in New Issue Copy Permalink