mibs/MIBS/extreme/SYSTEM-MIB

-- MIB File: System.mib
--
-- Title: Switch System MIB.
--

SYSTEM-MIB DEFINITIONS ::= BEGIN

  IMPORTS
      DisplayString, TEXTUAL-CONVENTION, TruthValue
      FROM SNMPv2-TC
      Integer32, OBJECT-TYPE, OBJECT-IDENTITY,
      MODULE-IDENTITY
      FROM SNMPv2-SMI
	  SwSensorIndex, SwPortIndex
      FROM Brocade-TC
      sw
      FROM SWBASE-MIB;

  swSystem MODULE-IDENTITY
    LAST-UPDATED "201805291200Z" -- May 29, 2018 12:00pm
    ORGANIZATION "Extreme Networks, Inc."
    CONTACT-INFO
         "Postal:  Extreme Networks, Inc.
                   6480 Via Del Oro
                   San Jose, CA 95119 USA
          Phone:   +1 408 579-2800
          E-mail:  support@extremenetworks.com
          WWW:     http://www.extremenetworks.com"

    DESCRIPTION "The MIB module is for system information.
                 Copyright (c) 2018 Extreme Networks, Inc.
         All rights reserved."
    REVISION   "201805291200Z" -- May 29, 2018 12:00pm
    DESCRIPTION	"Updated ORGANIZATION and CONTACT-INFO with Extreme Networks"
    REVISION   "1104151830Z" -- Apr 15, 2011 6:30pm 
    DESCRIPTION "Initial version of this module."
	REVISION   "1204301800Z" -- Apr 30, 2012 6:00pm 
    DESCRIPTION "Added swID mib object."
	REVISION   "1609231030Z" -- Sept 23, 2016 10:30am 
    DESCRIPTION "Removed implementation of swFCPort, swFabric, swFlashDL*."

    ::= { sw 1 }

  -- 3..7 are reserved; should not be used for new features.
	
  swEvent	OBJECT-IDENTITY
     STATUS  current
     DESCRIPTION   "The OID sub-tree for swEvent group."
     ::= { sw 8 }

  swCpuOrMemoryUsage  OBJECT-IDENTITY
     STATUS  current
     DESCRIPTION   "The OID sub-tree for cpu or mem usage group."
	 ::= { sw 26 }

  FcPortFlag        ::= TEXTUAL-CONVENTION
     STATUS  current
     DESCRIPTION   "Represents the port status for a FC Flag. Currently this will indicate
                    if the port is virtual or physical."
     SYNTAX  BITS {
            physical           (0),
            virtual            (1)
           }
  --
  -- the System Group (sw)
  --

  swCurrentDate		OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..64))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current date information in displayable textual
		format."
  ::= { swSystem 1 }

  swBootDate		OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..64))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The date and time when the system last booted, in
		displayable textual format."
  ::= { swSystem 2 }

  swFWLastUpdated	OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..64))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The information indicates the date when the firmware
		was last updated, in displayable textual format."
  ::= { swSystem 3 }

  swFlashLastUpdated	OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..64))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The information indicates the date when the FLASH
		was last updated, in displayable textual format."
  ::= { swSystem 4 }

  swBootPromLastUpdated	OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..64))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The information indicates the date when the boot PROM
		was last updated, in displayable textual format."
  ::= { swSystem 5 }

  swFirmwareVersion	OBJECT-TYPE
	SYNTAX		DisplayString(SIZE (0..24))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current version of the firwmare."
  ::= { swSystem 6 }

  swOperStatus		OBJECT-TYPE
	SYNTAX		INTEGER {
			  online	(1),
			  offline	(2),
			  testing	(3),
			  faulty	(4)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current operational status of the switch.
		The states are as follow:
		o online(1) means the switch is accessible by an external
		  port;
		o offline(2) means the switch is not accessible;
		o testing(3) means the switch is in a built-in test mode
		  and is not accessible by an external port;
		o faulty(4) means the switch is not operational."
  ::= { swSystem 7 }

  -- 8..9 are reserved; should not be used for new features.

  swSsn			OBJECT-TYPE
        SYNTAX          DisplayString(SIZE (0..128))
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "The soft serial number of the switch."
  ::= { swSystem 10 }

   -- 11..17 are reserved

  swBeaconOperStatus	OBJECT-TYPE
	SYNTAX		INTEGER {
				on	(1),
				off	(2)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current operational status of the switch beacon.
			 When the beacon is on, the LEDs on the front panel
			 of the switch run alternately from left to right
			 and right to left. The color is yellow.
			 When the beacon is off, each LED will be in their
			 its regular status indicating color and state."
  ::= { swSystem 18 }

  swBeaconAdmStatus	OBJECT-TYPE
	SYNTAX		INTEGER {
				on	(1),
				off	(2)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The desired status of the switch beacon.
			 When the beacon is set to on, the LEDs on the front
			 panel of the switch run alternately from left to right
			 and right to left. The color is yellow.
			 When the beacon is set to off, each LED will be in
			 its regular status indicating color and state."
  ::= { swSystem 19 }

  swDiagResult	OBJECT-TYPE
	SYNTAX		INTEGER {
				sw-ok			(1),
				sw-faulty	    (2),
				sw-embedded-port-fault	(3)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The result of the power-on startup (POST)
			 diagnostics."
  ::= { swSystem 20 }

  -- operating environment sensors (temperature, fan, power supply...)
  swNumSensors		OBJECT-TYPE
	SYNTAX		Integer32 (0..2147483647)
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The number of sensors inside the switch."
  ::= { swSystem 21 }

  swSensorTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF SwSensorEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION	"The table of sensor entries."
  ::= { swSystem 22 }

  swSensorEntry		OBJECT-TYPE
	SYNTAX		SwSensorEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION	"An entry of the sensor information."
	INDEX		{ swSensorIndex }
  ::= { swSensorTable 1 }

  SwSensorEntry	::= SEQUENCE {
	swSensorIndex	SwSensorIndex,
	swSensorType	INTEGER,
	swSensorStatus	INTEGER,
	swSensorValue	Integer32,
	swSensorInfo	DisplayString
  }

  swSensorIndex		OBJECT-TYPE
	SYNTAX		SwSensorIndex
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"This object identifies the sensor."
  ::= { swSensorEntry 1 }

  swSensorType		OBJECT-TYPE
	SYNTAX		INTEGER {
			  temperature	(1),
			  fan		(2),
			  power-supply	(3)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"This object identifies the sensor type."
  ::= { swSensorEntry 2 }

  swSensorStatus	OBJECT-TYPE
	SYNTAX		INTEGER {
			  unknown	(1),
			  faulty	(2),
			  below-min	(3),
			  nominal	(4),
			  above-max	(5),
			  absent	(6)
			}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current status of the sensor."
  ::= { swSensorEntry 3 }

  swSensorValue		OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"The current value (reading) of the sensor.
		The value, -2147483648, represents an unknown quantity.
		It also means that the sensor does not have the capability to
		measure the actual value. In V2.0, the temperature sensor
		value will be in Celsius; the fan value will be in RPM
		(revolution per minute); and the power supply sensor reading
		will be unknown."
  ::= { swSensorEntry 4 }

  swSensorInfo		OBJECT-TYPE
	SYNTAX		DisplayString(SIZE(0..255))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION	"Additional displayable information on the sensor.
		In V2.x, it contains the sensor type and number
		in textual format. For example, 'Temp 3', 'Fan 6'."
  ::= { swSensorEntry 5 }

  -- 23 is reserved

  swID     OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
    "The number of the logical switch (0/1)."
    ::= { swSystem 24 }

  swEtherIPAddress     OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The IP Address of the Ethernet interface of this logical
        switch."
    ::= { swSystem 25 }

  swEtherIPMask OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The IP Mask of the Ethernet interface of this logical switch."
    ::= { swSystem 26}

  -- 27..28 are reserved

  swIPv6Address OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS not-accessible 
        STATUS  current
        DESCRIPTION
        "IPV6 address."
    ::= { swSystem 29 }

  swIPv6Status  OBJECT-TYPE
    SYNTAX      INTEGER {
              tentative (1),
              preferred (2),
              ipdeprecated (3),
              inactive  (4)
            }
    MAX-ACCESS     not-accessible 
    STATUS      current
    DESCRIPTION "The current status of ipv6 address."
  ::= { swSystem 30 }

  --
  -- End of System Group
  --

  --
  -- swEventTable is defined to gather event info for trap
  -- SNMP GET/SET is not supported on this 	
  --

  swEventTrapLevel      OBJECT-TYPE
        SYNTAX          INTEGER {
			  none		(0),
                          critical      (1),
                          error         (2),
                          warning       (3),
                          informational (4),
                          debug         (5)
                        }
        MAX-ACCESS          read-write
        STATUS          deprecated
        DESCRIPTION     "swAgtTrapSeverityLevel, in absence of
		swEventTrapLevel, specifies the Trap Severity Level of each
		defined trap recipient host.
		This object specifies the swEventTrap level in
		conjunction with an event's severity level. When an event
		occurs and if its severity level is at or below the value
		specified by this object instance, the agent will send
		the associated swEventTrap to configured recipients."
  ::= { swEvent 1 }
 
  -- { swEvent 2..3 are reserved }
 
  swEventNumEntries     OBJECT-TYPE
        SYNTAX          Integer32 (0..2147483647)
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "The number of entries in the Event Table."
  ::= { swEvent 4 }
 
  -- possible events available, included her for lib/thresh/fwd.c compilation 
  SwFwEvent ::= INTEGER {
                started(1),
                changed(2),
                exceeded(3),
                below(4),
                above(5),
                inBetween(6),
                lowBufferCrsd(7)
                }


  swEventTable          OBJECT-TYPE
        SYNTAX          SEQUENCE OF SwEventEntry
        MAX-ACCESS          not-accessible
        STATUS          current
        DESCRIPTION     "The table of event entries."
  ::= { swEvent 5 }
 
  swEventEntry          OBJECT-TYPE
        SYNTAX          SwEventEntry
        MAX-ACCESS          not-accessible
        STATUS          current
        DESCRIPTION     "An entry of the event table."
        INDEX           { swEventIndex }
 
  ::= { swEventTable 1 }
 
  SwEventEntry          ::= SEQUENCE {
        swEventIndex		Integer32,
        swEventTimeInfo		DisplayString,
        swEventLevel		INTEGER,
	swEventRepeatCount	Integer32,
        swEventDescr		DisplayString,
        swEventVfId         Integer32
  }

  swEventIndex          OBJECT-TYPE
        SYNTAX          Integer32 (0..2147483647)
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "This object identifies the event entry."
  ::= { swEventEntry 1 }
 
  swEventTimeInfo       OBJECT-TYPE
        SYNTAX          DisplayString(SIZE (0..64))
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "This object identifies the date and time when this
                event occurred, in textual format."
  ::= { swEventEntry 2 }
 
  swEventLevel          OBJECT-TYPE
        SYNTAX          INTEGER {
                          critical      (1),
                          error         (2),
                          warning       (3),
			  informational	(4),
                          debug         (5)
                        }
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "This object identifies the severity level of this
		event entry."
  ::= { swEventEntry 3 }
 
  swEventRepeatCount	OBJECT-TYPE
        SYNTAX          Integer32 (0..2147483647)
        MAX-ACCESS          read-only
        STATUS          current
        DESCRIPTION     "This object identifies how many times this particular
		event has occurred."
  ::= { swEventEntry 4 }
 
  swEventDescr          OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS          read-only
        STATUS          current
         DESCRIPTION     "This object identifies the textual description of
                the event."
  ::= { swEventEntry 5 }

  swEventVfId           OBJECT-TYPE
        SYNTAX          Integer32 (0..255)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "This object identifies the Virtual fabric id."
  ::= { swEventEntry 6 }
 

  --
  -- System CPU usage and Memory usage
  --
	swCpuUsage   OBJECT-TYPE
    SYNTAX      Integer32(0..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "System's cpu usage."
     ::= { swCpuOrMemoryUsage 1 }

    swCpuNoOfRetries         OBJECT-TYPE
    SYNTAX      Integer32 (1..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of times system should take cpu utilization sample before sending the CPU utilization trap."
     ::= { swCpuOrMemoryUsage 2 }

    swCpuUsageLimit         OBJECT-TYPE
    SYNTAX      Integer32 (1..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "CPU usage limit"
     ::= { swCpuOrMemoryUsage 3 }

    swCpuPollingInterval  OBJECT-TYPE
    SYNTAX      Integer32 (10..3600)
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Time interval between two memory samples."
     ::= { swCpuOrMemoryUsage 4 }

    swCpuAction  OBJECT-TYPE
    SYNTAX        Integer32 (0..3)
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Specifies  the  actions to be taken if system
                     resources  exceed  the  specified  threshold."
     ::= { swCpuOrMemoryUsage 5 }

    swMemUsage   OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "System's memory usage."
     ::= { swCpuOrMemoryUsage 6 }

    swMemNoOfRetries         OBJECT-TYPE
    SYNTAX      Integer32 (1..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of times system should take memory usage sample before sending the memory usage trap."
     ::= { swCpuOrMemoryUsage 7 }

    swMemUsageLimit         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Memory usage limit"
     ::= { swCpuOrMemoryUsage 8 }

    swMemPollingInterval  OBJECT-TYPE
    SYNTAX      Integer32 (10..3600)
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Time interval between two memory samples."
     ::= { swCpuOrMemoryUsage 9 }

    swMemAction  OBJECT-TYPE
    SYNTAX      Integer32 (0..3)
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Specifies  the  actions to be taken if system
                     resources  exceed  the  specified  threshold."
     ::= { swCpuOrMemoryUsage 10 }

			
--
-- Enterprise Specific Traps for Switch (sw).
--

  swTrapsV2 OBJECT-IDENTITY
    STATUS     current
	DESCRIPTION	"The Traps for Extreme's Switch."
	::= { sw 0 }

   swEventTrap           NOTIFICATION-TYPE
        OBJECTS       { swEventIndex, swEventTimeInfo, swEventLevel,
                        swEventRepeatCount, swEventDescr, swSsn }
        STATUS      current
        DESCRIPTION     "This trap is generated when an event whose
                level at or below swEventTrapLevel occurs."
	--#TYPE		"A firmware event has been logged"
	--#SUMMARY	"Event %d: %s (severity level %d) - %s SSN is #%s"
	--#ARGUMENTS	{ 0, 1, 2, 4, 5 }
	--#SEVERITY	INFORMATIONAL
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
	::= { swTrapsV2 4 }

  swStateChangeTrap  NOTIFICATION-TYPE
    OBJECTS { swOperStatus }
    STATUS current
    DESCRIPTION "This trap is sent whenever switch state changes to online/offline"
    ::= { swTrapsV2 12 }

END