mibs/MIBS/fs/GBNL3If-MIB

470 lines
15 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
GBNL3If-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Gauge32,
Unsigned32, Integer32,
IpAddress FROM SNMPv2-SMI
RowStatus, TruthValue,
DisplayString, MacAddress FROM SNMPv2-TC
-- IpAddress FROM RFC1155-SMI
VlanIndex FROM Q-BRIDGE-MIB
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
gbnL3 FROM ADMIN-MASTER-MIB;
gbnL3If MODULE-IDENTITY
LAST-UPDATED "0105102004Z" -- May 10, 2004
ORGANIZATION "Admin Systems, Inc."
CONTACT-INFO "Admin Systems, Inc.
E-mail: support@admin.com.cn"
DESCRIPTION "GBN Generic router id MIB definition."
REVISION "0105102004Z" -- May 10, 2004
DESCRIPTION "Initial MIB creation."
::= { gbnL3 1 }
------------------------------------------------------------------------------
-- gbnL3Mib OBJECT IDENTIFIER ::= { gbnL3If 1 }
gbnL3SuperVLAN OBJECT IDENTIFIER ::= { gbnL3If 2 }
gbnL3Arp OBJECT IDENTIFIER ::= { gbnL3If 3 }
gbnL3IP OBJECT IDENTIFIER ::= { gbnL3If 4 }
gbnL3DHCP OBJECT IDENTIFIER ::= { gbnL3If 5 }
gbnL3URPF OBJECT IDENTIFIER ::= { gbnL3If 6 }
------------------------------------------------------------------------------
--
-- gbnL3SuperVLAN:
--
--
------------------------------------------------------------------------------
arpProxy OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the ARP proxy."
::= { gbnL3SuperVLAN 1 }
superVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SuperVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of superVLAN.When create a new entry,must set superVLANStatus to be active to create
a entry first,or set superVLANsw/superVLANsuper fisrt will return no suchinstanc error"
::= { gbnL3SuperVLAN 2 }
superVLANEntry OBJECT-TYPE
SYNTAX SuperVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry for superVLAN."
INDEX { superVLANVID }
::= { superVLANTable 1 }
SuperVLANEntry ::= SEQUENCE {
superVLANVID INTEGER,
superVLANsw INTEGER,
superVLANsuper TruthValue,
superVLANStatus RowStatus
}
superVLANVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vlan id."
::= { superVLANEntry 1 }
superVLANsw OBJECT-TYPE
SYNTAX INTEGER (0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sw,0 means not existting."
::= { superVLANEntry 2 }
superVLANsuper OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface is superVLAN or not"
::= { superVLANEntry 3 }
superVLANStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the status of this entry"
::= { superVLANEntry 4 }
------------------------------------------------------------------------------
--
-- gbnL3Arp:
--
--
------------------------------------------------------------------------------
arpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "<22>˱<EFBFBD>ΪϵͳARP<52>ĸ<EFBFBD><C4B8>ٻ<EFBFBD><D9BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>rfc1213<31><33><EFBFBD>Ѿ<EFBFBD><D1BE><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>й<EFBFBD>ϵͳ
ARP<52>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD>at<61><74><EFBFBD>е<EFBFBD>atTable<6C><65>ip<69><70><EFBFBD>е<EFBFBD>ipNetToMediaTable<6C><65><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
<20><><EFBFBD><EFBFBD>û<EFBFBD><C3BB>VLAN<41><4E>Ϣ<EFBFBD>ͽ<EFBFBD><CDBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˿<EFBFBD><CBBF><EFBFBD>Ϣ<EFBFBD><CFA2><EFBFBD>ʶ<EFBFBD><CAB6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>չ<EFBFBD><D5B9><EFBFBD><EFBFBD>"
::= { gbnL3Arp 1 }
arpEntry OBJECT-TYPE
SYNTAX ArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ϵͳARP<52>ĸ<EFBFBD><C4B8>ٻ<EFBFBD><D9BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
INDEX { arpIpAddress }
::= { arpTable 1 }
ArpEntry ::=
SEQUENCE {
arpIpAddress IpAddress,
arpMacAddress MacAddress,
arpIfIndex INTEGER,
arpVlan INTEGER,
arpPort INTEGER,
arpType INTEGER,
arpRowStatus RowStatus
}
arpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP<49><50>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD>Ϊ<EFBFBD><CEAA><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
::= { arpEntry 1 }
arpMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP<49><50>ַ<EFBFBD><D6B7>Ӧ<EFBFBD><D3A6>MAC<41><43>ַ<EFBFBD><D6B7>"
::= { arpEntry 2 }
arpIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP<49><50>ַ<EFBFBD><D6B7><EFBFBD>ڵĽӿ<C4BD><D3BF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
::= { arpEntry 3 }
arpVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP<49><50>ַ<EFBFBD><D6B7><EFBFBD>ڵ<EFBFBD>VLAN<41><4E>"
::= { arpEntry 4 }
arpPort OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ѧϰ<D1A7><CFB0>IP<49><50>ַ<EFBFBD>Ľ<EFBFBD><C4BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˿ںš<DABA>"
::= { arpEntry 5 }
arpType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),--<2D><>ЧARP<52><50><EFBFBD><EFBFBD>
dynamic(3),--ѧϰ<D1A7><CFB0><EFBFBD><EFBFBD>ARP<52><50><EFBFBD><EFBFBD>
static(4) --<2D><>̬<EFBFBD><CCAC><EFBFBD>ӵ<EFBFBD>ARP<52><50><EFBFBD><EFBFBD>
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "<22><>ARP<52><50><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͡<EFBFBD>"
::= { arpEntry 6 }
arpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "<22><>ARP<52><50><EFBFBD><EFBFBD><EFBFBD><EFBFBD>״̬<D7B4><CCAC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><><C9BE><EFBFBD><EFBFBD>̬ARP<52><50><EFBFBD>ativeΪ<65><CEAA><EFBFBD>ӣ<EFBFBD>destroyΪɾ<CEAA><C9BE><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>
<20><><EFBFBD><EFBFBD>mac<61><63>ַ<EFBFBD><D6B7>ֻ<EFBFBD><D6BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>VLAN<41>Ͷ˿ں<CBBF>active<76>ſ<EFBFBD><C5BF>Է<EFBFBD><D4B7>سɹ<D8B3><C9B9><EFBFBD>"
::= { arpEntry 7 }
arpAging OBJECT-TYPE
SYNTAX INTEGER(3..2880)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The age time of dynamic arp entry.Unit is minute.Default is 20."
--arp<72><70><EFBFBD><EFBFBD><EFBFBD>ϻ<EFBFBD>ʱ<EFBFBD><EFBFBD><E4A3AC>λΪ<CEBB><CEAA><EFBFBD>ӣ<EFBFBD>Ĭ<EFBFBD><C4AC>Ϊ20<32><30><EFBFBD>ӡ<EFBFBD>
::= { gbnL3Arp 2 }
arpNum OBJECT-TYPE
SYNTAX INTEGER(0..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total arp entries."
--arp<72><70>Ŀ<EFBFBD><C4BF><EFBFBD>ܸ<EFBFBD><DCB8><EFBFBD><EFBFBD><EFBFBD>
::= { gbnL3Arp 3 }
------------------------------------------------------------------------------
--
-- gbnL3IP:
--
--
------------------------------------------------------------------------------
ipRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ipaddress range for VLAN/Supervlan interface."
--VLAN/SuperVLAN<41>ӿڵ<D3BF>IP<49><50>ַ<EFBFBD><D6B7>Χ<EFBFBD><CEA7><EFBFBD>Ʊ<EFBFBD>.
::= { gbnL3IP 1 }
ipRangeEntry OBJECT-TYPE
SYNTAX IpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry for ipRangeTable."
INDEX { ipRangeIndex }
::= { ipRangeTable 1 }
IpRangeEntry ::= SEQUENCE {
ipRangeSW Integer32,
ipRangeIndex Integer32,
ipRangeStartIP IpAddress,
ipRangeEndIP IpAddress,
ipRangeStatus RowStatus
}
ipRangeSW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sw,for 3526 1-32, for 3750 1-256"
--IP<49>ӿڵ<D3BF>ID,ΪgbnL3IpSubnetIfIndex<65>ĺ<EFBFBD>2<EFBFBD><32><EFBFBD>ֽڵ<D6BD>ȡֵ,<2C><><EFBFBD><EFBFBD>3526<32><36>ΧΪ1-12,<2C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>3750Ϊ1-256
::= { ipRangeEntry 1 }
ipRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index number of range."
--ÿ<><C3BF>IP<49>ӿڿ<D3BF><DABF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>2048/4096<39><36><EFBFBD>ӷ<EFBFBD>Χ.
::= { ipRangeEntry 2 }
ipRangeStartIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start ipaddress of this range."
--<2D><>ʼIP<49><50>ַ.
::= { ipRangeEntry 3 }
ipRangeEndIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end ipaddress of this range."
--<2D><><EFBFBD><EFBFBD>IP<49><50>ַ.
::= { ipRangeEntry 4 }
ipRangeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the status of this entry"
::= { ipRangeEntry 5 }
------------------------------------------------------------------------------
--
-- gbnL3DHCP:
--
--
------------------------------------------------------------------------------
Option82 OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable option82.Default is disalbe"
--DHCP<43>м<EFBFBD>option82<38><32><EFBFBD><EFBFBD><><C4AC>Ϊ<EFBFBD>ر<EFBFBD>
::= { gbnL3DHCP 1 }
Option82Strategy OBJECT-TYPE
SYNTAX INTEGER{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Actions when receive packets with option82."
--<2D><>option82<38><32><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>DHCP<43>м̽<D0BC><CCBD>յ<EFBFBD><D5B5><EFBFBD>option82ѡ<32><D1A1><EFBFBD><EFBFBD><EFBFBD>ݵı<DDB5><C4B1><EFBFBD>ʱ<EFBFBD><CAB1>ȡ<EFBFBD>IJ<EFBFBD><C4B2><EFBFBD>.
--dropΪ<70><CEAA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>,keepΪ<70><CEAA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĵ<EFBFBD>option82ѡ<32><D1A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>,<2C><>replaceΪ<65><EFBFBD><E6BBBB><EFBFBD><EFBFBD><EFBFBD>е<EFBFBD>option82<38><32><EFBFBD><EFBFBD>.
--Ĭ<><C4AC>Ϊreplace
::= { gbnL3DHCP 2 }
option82Format OBJECT-TYPE
SYNTAX INTEGER{
normal(1),
verbose(2),
henan(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"packet format of dhcp option 82.Default is normal(1)"
::= { gbnL3DHCP 3 }
option82FormatVerboseNodeIdentifier OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when format is verbose,can set value of node-identifier.Except special string listing below, others string means user-define string.
default is 0 length of value, means use switch mac"
--"hostname" means switch hostname
::= { gbnL3DHCP 4 }
option82PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Option82PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port table of dhcp option 82."
::= { gbnL3DHCP 5 }
option82PortEntry OBJECT-TYPE
SYNTAX Option82PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry for option82PortTable."
INDEX { option82PortIndex }
::= { option82PortTable 1 }
Option82PortEntry ::= SEQUENCE {
option82PortIndex Integer32,
option82PortStrategy INTEGER,
option82PortCircuitId DisplayString,
option82PortRemoteId DisplayString
}
option82PortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port index"
::= { option82PortEntry 1 }
option82PortStrategy OBJECT-TYPE
SYNTAX INTEGER{
drop(1),
keep(2),
replace(3),
appendhostname(4),
appendhostnameip(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Actions when receive packets with option82.drop(1) means drop packets, keep(2) means not change the packet
replace(3) means relace option82 value, appendhostname(4) means append option82 suboption 9 with hostname,
appendhostnameip(5) means append option82 suboption 9 with hostname and ip.default is replace(3)."
::= { option82PortEntry 2 }
option82PortCircuitId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"circuit-id string of port.default is 0 length of value."
::= { option82PortEntry 3 }
option82PortRemoteId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"circuit-id string of port.default is 0 length of value.Except special string listing below, others string means user-define string. "
--"hostname" means switch hostname
::= { option82PortEntry 4 }
------------------------------------------------------------------------------
--
-- gbnL3URPF:
--
--
------------------------------------------------------------------------------
UrpfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UrpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of URPF state of every interface.Each interface can be of URPF strict mode,
URPF loose mode,or be URPF turned off. "
::= { gbnL3URPF 1 }
urpfEntry OBJECT-TYPE
SYNTAX UrpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry for UrpfTable."
INDEX { urpfIfIndex }
::= { UrpfTable 1 }
UrpfEntry ::= SEQUENCE {
urpfIfIndex INTEGER,
urpfState INTEGER
}
urpfIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index,for 3650 1-256, for 3750-48 1-512"
--<2D>ӿ<EFBFBD><D3BF><EFBFBD><EFBFBD><EFBFBD>
::= { urpfEntry 1 }
urpfState OBJECT-TYPE
SYNTAX INTEGER{
off(1),
strict(2),
loose(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"URPF state."
--urpf ״̬<D7B4><CCAC>Ĭ<EFBFBD><C4AC>Ϊ<EFBFBD>ر<EFBFBD>
::= { urpfEntry 2 }
END