842 lines
35 KiB
Plaintext
842 lines
35 KiB
Plaintext
|
STP-MIB DEFINITIONS ::= BEGIN
|
|||
|
|
|
|||
|
|
IMPORTS
|
|||
|
|
MODULE-IDENTITY, Counter32, TimeTicks, OBJECT-TYPE, Integer32
|
|||
|
|
FROM SNMPv2-SMI
|
|||
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|||
|
|
FROM SNMPv2-CONF
|
|||
|
|
gbnL2 FROM ADMIN-MASTER-MIB;
|
|||
|
|
|
|||
|
|
|
|||
|
|
stpMib MODULE-IDENTITY
|
|||
|
|
LAST-UPDATED "9904230031Z" -- April 23, 1999
|
|||
|
|
ORGANIZATION "admin Inc."
|
|||
|
|
CONTACT-INFO
|
|||
|
|
"admin
|
|||
|
|
E-mail: "
|
|||
|
|
|
|||
|
|
DESCRIPTION "STP module management."
|
|||
|
|
|
|||
|
|
REVISION "9905130000Z" -- May 13, 1999
|
|||
|
|
DESCRIPTION "Initial Version"
|
|||
|
|
|
|||
|
|
::= { gbnL2 3 }
|
|||
|
|
|
|||
|
|
stpMIBObjects OBJECT IDENTIFIER ::= { stpMib 1 }
|
|||
|
|
stpDot1dStp OBJECT IDENTIFIER ::= { stpMIBObjects 1 }
|
|||
|
|
|
|||
|
|
|
|||
|
|
-- All representations of MAC addresses in this MIB Module
|
|||
|
|
-- use, as a textual convention (i.e. this convention does
|
|||
|
|
-- not affect their encoding), the data type:
|
|||
|
|
|
|||
|
|
-- MacAddress ::= OCTET STRING (SIZE (6)) a 6 octet address
|
|||
|
|
-- in the
|
|||
|
|
-- "canonical"
|
|||
|
|
-- order
|
|||
|
|
-- defined by IEEE 802.1a, i.e., as if it were transmitted
|
|||
|
|
-- least significant bit first, even though 802.5 (in
|
|||
|
|
-- contrast to other n802.x protocols) requires MAC
|
|||
|
|
-- addresses to be transmitted most significant bit first.
|
|||
|
|
--
|
|||
|
|
-- 16-bit addresses, if needed, are represented by setting
|
|||
|
|
-- their upper 4 octets to all 0's, i.e., AAFF would be
|
|||
|
|
-- represented as 00000000AAFF.
|
|||
|
|
|
|||
|
|
|
|||
|
|
-- Similarly, all representations of Bridge-Id in this MIB
|
|||
|
|
-- Module use, as a textual convention (i.e. this
|
|||
|
|
-- convention does not affect their encoding), the data
|
|||
|
|
-- type:
|
|||
|
|
|
|||
|
|
BridgeId ::= OCTET STRING (SIZE (8)) -- the
|
|||
|
|
-- Bridge-Identifier
|
|||
|
|
-- as used in the
|
|||
|
|
-- Spanning Tree
|
|||
|
|
-- Protocol to uniquely identify a bridge. Its first two
|
|||
|
|
-- octets (in network byte order) contain a priority
|
|||
|
|
-- value and its last 6 octets contain the MAC address
|
|||
|
|
-- used to refer to a bridge in a unique fashion
|
|||
|
|
-- (typically, the numerically smallest MAC address
|
|||
|
|
-- of all ports on the bridge).
|
|||
|
|
-- Several objects in this MIB module represent values of
|
|||
|
|
-- timers used by the Spanning Tree Protocol. In this
|
|||
|
|
-- MIB, these timers have values in units of hundreths of
|
|||
|
|
-- a second (i.e. 1/100 secs).
|
|||
|
|
-- These timers, when stored in a Spanning Tree Protocol's
|
|||
|
|
-- BPDU, are in units of 1/256 seconds. Note, however,
|
|||
|
|
-- that 802.1D-1990 specifies a settable granularity of
|
|||
|
|
-- no more than 1 second for these timers. To avoid
|
|||
|
|
-- ambiguity, a data type is defined here as a textual
|
|||
|
|
-- convention and all representation of these timers
|
|||
|
|
-- in this MIB module are defined using this data type. An
|
|||
|
|
-- algorithm is also defined for converting between the
|
|||
|
|
-- different units, to ensure a timer's value is not
|
|||
|
|
-- distorted by multiple conversions.
|
|||
|
|
-- The data type is:
|
|||
|
|
|
|||
|
|
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
|
|||
|
|
|
|||
|
|
-- To convert a Timeout value into a value in units of
|
|||
|
|
-- 1/256 seconds, the following algorithm should be used:
|
|||
|
|
--
|
|||
|
|
-- b = floor( (n * 256) / 100)
|
|||
|
|
--
|
|||
|
|
-- where:
|
|||
|
|
-- floor = quotient [ignore remainder]
|
|||
|
|
-- n is the value in 1/100 second units
|
|||
|
|
-- b is the value in 1/256 second units
|
|||
|
|
--
|
|||
|
|
-- To convert the value from 1/256 second units back to
|
|||
|
|
-- 1/100 seconds, the following algorithm should be used:
|
|||
|
|
--
|
|||
|
|
-- n = ceiling( (b * 100) / 256)
|
|||
|
|
--
|
|||
|
|
-- where:
|
|||
|
|
-- ceiling = quotient [if remainder is 0], or
|
|||
|
|
-- quotient + 1 [if remainder is non-zero]
|
|||
|
|
-- n is the value in 1/100 second units
|
|||
|
|
-- b is the value in 1/256 second units
|
|||
|
|
--
|
|||
|
|
-- Note: it is important that the arithmetic operations are
|
|||
|
|
-- done in the order specified (i.e., multiply first, divide
|
|||
|
|
-- second).
|
|||
|
|
|
|||
|
|
|
|||
|
|
-- the stpDot1dStp group
|
|||
|
|
|
|||
|
|
-- Implementation of the dot1dStp group is optional. It is
|
|||
|
|
-- implemented by those bridges that support the Spanning Tree
|
|||
|
|
-- Protocol.
|
|||
|
|
|
|||
|
|
|
|||
|
|
stpDot1dStpProtocolSpecification OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
unknown(1),
|
|||
|
|
decLb100(2),
|
|||
|
|
ieee8021d(3)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"An indication of what version of the Spanning
|
|||
|
|
Tree Protocol is being run. The value
|
|||
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|||
|
|
Spanning Tree protocol. IEEE 802.1d
|
|||
|
|
implementations will return 'ieee8021d(3)'. If
|
|||
|
|
future versions of the IEEE Spanning Tree Protocol
|
|||
|
|
are released that are incompatible with the
|
|||
|
|
current version a new value will be defined."
|
|||
|
|
::= { stpDot1dStp 1 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPriority OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER (0..61440)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 32768:all }
|
|||
|
|
The value of the write-able portion of the Bridge
|
|||
|
|
ID, i.e., the first two octets of the (8 octet
|
|||
|
|
long) Bridge ID. The other (last) 6 octets of the
|
|||
|
|
Bridge ID are given by the value of
|
|||
|
|
dot1dBaseBridgeAddress.The value has to be a multiple
|
|||
|
|
of 4096"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.7"
|
|||
|
|
::= { stpDot1dStp 2 }
|
|||
|
|
|
|||
|
|
stpDot1dStpTimeSinceTopologyChange OBJECT-TYPE
|
|||
|
|
SYNTAX TimeTicks
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The time (in hundredths of a second) since the
|
|||
|
|
last time a topology change was detected by the
|
|||
|
|
bridge entity."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|||
|
|
::= { stpDot1dStp 3 }
|
|||
|
|
|
|||
|
|
stpDot1dStpTopChanges OBJECT-TYPE
|
|||
|
|
SYNTAX Counter32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The total number of topology changes detected by
|
|||
|
|
this bridge since the management entity was last
|
|||
|
|
reset or initialized."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|||
|
|
::= { stpDot1dStp 4 }
|
|||
|
|
|
|||
|
|
stpDot1dStpDesignatedRoot OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The bridge identifier of the root of the spanning
|
|||
|
|
tree as determined by the Spanning Tree Protocol
|
|||
|
|
as executed by this node. This value is used as
|
|||
|
|
the Root Identifier parameter in all Configuration
|
|||
|
|
Bridge PDUs originated by this node."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.1"
|
|||
|
|
::= { stpDot1dStp 5 }
|
|||
|
|
|
|||
|
|
stpDot1dStpRootCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The cost of the path to the root as seen from
|
|||
|
|
this bridge."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.2"
|
|||
|
|
::= { stpDot1dStp 6 }
|
|||
|
|
|
|||
|
|
stpDot1dStpRootPort OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port number of the port which offers the
|
|||
|
|
lowest cost path from this bridge to the root
|
|||
|
|
bridge."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.3"
|
|||
|
|
::= { stpDot1dStp 7 }
|
|||
|
|
|
|||
|
|
stpDot1dStpMaxAge OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (600..4000)
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The maximum age of Spanning Tree Protocol
|
|||
|
|
information learned from the network on any port
|
|||
|
|
before it is discarded, in units of hundredths of
|
|||
|
|
a second. This is the actual value that this
|
|||
|
|
bridge is currently using."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.4"
|
|||
|
|
::= { stpDot1dStp 8 }
|
|||
|
|
|
|||
|
|
stpDot1dStpHelloTime OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (100..1000)
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The amount of time between the transmission of
|
|||
|
|
Configuration bridge PDUs by this node on any port
|
|||
|
|
when it is the root of the spanning tree or trying
|
|||
|
|
to become so, in units of hundredths of a second.
|
|||
|
|
This is the actual value that this bridge is
|
|||
|
|
currently using."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.5"
|
|||
|
|
::= { stpDot1dStp 9 }
|
|||
|
|
|
|||
|
|
stpDot1dStpHoldTime OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This time value determines the interval length
|
|||
|
|
during which no more than two Configuration bridge
|
|||
|
|
PDUs shall be transmitted by this node, in units
|
|||
|
|
of hundredths of a second."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|||
|
|
::= { stpDot1dStp 10 }
|
|||
|
|
|
|||
|
|
stpDot1dStpForwardDelay OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (400..3000)
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This time value, measured in units of hundredths
|
|||
|
|
of a second, controls how fast a port changes its
|
|||
|
|
spanning state when moving towards the Forwarding
|
|||
|
|
state. The value determines how long the port
|
|||
|
|
stays in each of the Listening and Learning
|
|||
|
|
states, which precede the Forwarding state. This
|
|||
|
|
value is also used, when a topology change has
|
|||
|
|
been detected and is underway, to age all dynamic
|
|||
|
|
entries in the Forwarding Database. [Note that
|
|||
|
|
this value is the one that this bridge is
|
|||
|
|
currently using, in contrast to
|
|||
|
|
stpDot1dStpBridgeForwardDelay which is the value that
|
|||
|
|
this bridge and all others would start using
|
|||
|
|
if/when this bridge were to become the root.]"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.6"
|
|||
|
|
::= { stpDot1dStp 11 }
|
|||
|
|
|
|||
|
|
stpDot1dStpBridgeMaxAge OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (600..4000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 2000:all }
|
|||
|
|
The value that all bridges use for MaxAge when
|
|||
|
|
this bridge is acting as the root. Note that
|
|||
|
|
802.1D-1990 specifies that the range for this
|
|||
|
|
parameter is related to the value of
|
|||
|
|
stpDot1dStpBridgeHelloTime. The granularity of this
|
|||
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|||
|
|
An agent may return a badValue error if a set is
|
|||
|
|
attempted to a value which is not a whole number
|
|||
|
|
of seconds."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.8"
|
|||
|
|
::= { stpDot1dStp 12 }
|
|||
|
|
|
|||
|
|
stpDot1dStpBridgeHelloTime OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (100..1000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 200:all }
|
|||
|
|
The value that all bridges use for HelloTime when
|
|||
|
|
this bridge is acting as the root. The
|
|||
|
|
granularity of this timer is specified by 802.1D-
|
|||
|
|
1990 to be 1 second. An agent may return a
|
|||
|
|
badValue error if a set is attempted to a value
|
|||
|
|
which is not a whole number of seconds."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.9"
|
|||
|
|
::= { stpDot1dStp 13 }
|
|||
|
|
|
|||
|
|
stpDot1dStpBridgeForwardDelay OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (400..3000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 1500:all }
|
|||
|
|
The value that all bridges use for ForwardDelay
|
|||
|
|
when this bridge is acting as the root. Note that
|
|||
|
|
802.1D-1990 specifies that the range for this
|
|||
|
|
parameter is related to the value of
|
|||
|
|
stpDot1dStpBridgeMaxAge. The granularity of this
|
|||
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|||
|
|
An agent may return a badValue error if a set is
|
|||
|
|
attempted to a value which is not a whole number
|
|||
|
|
of seconds."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.3.10"
|
|||
|
|
::= { stpDot1dStp 14 }
|
|||
|
|
|
|||
|
|
stpPropStpEnable OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enabled(1),
|
|||
|
|
disabled(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { enabled:all }
|
|||
|
|
The enabled/disabled status of STP for the bridge entity."
|
|||
|
|
::= { stpDot1dStp 16 }
|
|||
|
|
|
|||
|
|
-- The Spanning Tree Port Table
|
|||
|
|
|
|||
|
|
stpDot1dStpPortTable OBJECT-TYPE
|
|||
|
|
SYNTAX SEQUENCE OF StpDot1dStpPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A table that contains port-specific information
|
|||
|
|
for the Spanning Tree Protocol."
|
|||
|
|
::= { stpDot1dStp 15 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortEntry OBJECT-TYPE
|
|||
|
|
SYNTAX StpDot1dStpPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A list of information maintained by every port
|
|||
|
|
about the Spanning Tree Protocol state for that
|
|||
|
|
port."
|
|||
|
|
INDEX { stpDot1dStpPort }
|
|||
|
|
::= { stpDot1dStpPortTable 1 }
|
|||
|
|
|
|||
|
|
StpDot1dStpPortEntry ::=
|
|||
|
|
SEQUENCE {
|
|||
|
|
stpDot1dStpPort
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1dStpPortPriority
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1dStpPortState
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1dStpPortEnable
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1dStpPortPathCost
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1dStpPortDesignatedRoot
|
|||
|
|
BridgeId,
|
|||
|
|
stpDot1dStpPortDesignatedCost
|
|||
|
|
Integer32,
|
|||
|
|
stpDot1dStpPortDesignatedBridge
|
|||
|
|
BridgeId,
|
|||
|
|
stpDot1dStpPortDesignatedPort
|
|||
|
|
OCTET STRING,
|
|||
|
|
stpDot1dStpPortForwardTransitions
|
|||
|
|
Counter32,
|
|||
|
|
stpDot1dRemoteLoopDetect
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortTxHoldCount
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortOperP2p
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortOperEdge
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortMcheck
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortTxTcn
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortTxConfig
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortTxRstp
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortRxTcn
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortRxConfig
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortRxRstp
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortClear
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortAdminP2p
|
|||
|
|
INTEGER,
|
|||
|
|
stpDot1wRstpPortAdminEdge
|
|||
|
|
INTEGER
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
stpDot1dStpPort OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER (1..128)
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port number of the port for which this entry
|
|||
|
|
contains Spanning Tree Protocol management
|
|||
|
|
information."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 6.8.2.1.2"
|
|||
|
|
::= { stpDot1dStpPortEntry 1 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortPriority OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER (0..240)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 128:all }
|
|||
|
|
The value of the priority field which is
|
|||
|
|
contained in the first (in network byte order)
|
|||
|
|
octet of the (2 octet long) Port ID. The other
|
|||
|
|
octet of the Port ID is given by the value of
|
|||
|
|
stpDot1dStpPort.The value has to be a multiple
|
|||
|
|
of 16"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.1"
|
|||
|
|
::= { stpDot1dStpPortEntry 2 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortState OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
disabled(1),
|
|||
|
|
blocking(2),
|
|||
|
|
listening(3),
|
|||
|
|
learning(4),
|
|||
|
|
forwarding(5),
|
|||
|
|
broken(6)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port's current state as defined by
|
|||
|
|
application of the Spanning Tree Protocol. This
|
|||
|
|
state controls what action a port takes on
|
|||
|
|
reception of a frame. If the bridge has detected
|
|||
|
|
a port that is malfunctioning it will place that
|
|||
|
|
port into the broken(6) state. For ports which
|
|||
|
|
are disabled (see stpDot1dStpPortEnable), this object
|
|||
|
|
will have a value of disabled(1)."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|||
|
|
::= { stpDot1dStpPortEntry 3 }
|
|||
|
|
|
|||
|
|
|
|||
|
|
stpDot1dStpPortEnable OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enabled(1),
|
|||
|
|
disabled(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The enabled/disabled status of the port."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|||
|
|
::= { stpDot1dStpPortEntry 4 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortPathCost OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER (1..200000000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { 10:all }
|
|||
|
|
The contribution of this port to the path cost of
|
|||
|
|
paths towards the spanning tree root which include
|
|||
|
|
this port. 802.1D-1990 recommends that the
|
|||
|
|
default value of this parameter be in inverse
|
|||
|
|
proportion to the speed of the attached LAN."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.3"
|
|||
|
|
::= { stpDot1dStpPortEntry 5 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortDesignatedRoot OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The unique Bridge Identifier of the Bridge
|
|||
|
|
recorded as the Root in the Configuration BPDUs
|
|||
|
|
transmitted by the Designated Bridge for the
|
|||
|
|
segment to which the port is attached."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.4"
|
|||
|
|
::= { stpDot1dStpPortEntry 6 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortDesignatedCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The path cost of the Designated Port of the
|
|||
|
|
segment connected to this port. This value is
|
|||
|
|
compared to the Root Path Cost field in received
|
|||
|
|
bridge PDUs."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|||
|
|
::= { stpDot1dStpPortEntry 7 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortDesignatedBridge OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The Bridge Identifier of the bridge which this
|
|||
|
|
port considers to be the Designated Bridge for
|
|||
|
|
this port's segment."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.6"
|
|||
|
|
::= { stpDot1dStpPortEntry 8 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortDesignatedPort OBJECT-TYPE
|
|||
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The Port Identifier of the port on the Designated
|
|||
|
|
Bridge for this port's segment."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1D-1990: Section 4.5.5.7"
|
|||
|
|
::= { stpDot1dStpPortEntry 9 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortForwardTransitions OBJECT-TYPE
|
|||
|
|
SYNTAX Counter32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The number of times this port has transitioned
|
|||
|
|
from the Learning state to the Forwarding state."
|
|||
|
|
::= { stpDot1dStpPortEntry 10 }
|
|||
|
|
|
|||
|
|
stpDot1dRemoteLoopDetect OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enabled(1),
|
|||
|
|
disabled(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The LOOP DETECT status of the port."
|
|||
|
|
--<2D>˿<EFBFBD>˽<EFBFBD><CBBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD>/<2F>ر<EFBFBD>״̬
|
|||
|
|
::= { stpDot1dStpPortEntry 11 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortTxHoldCount OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER(1..255)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Maximum number of BPDUs allowed to be transmitted during per helloTime"
|
|||
|
|
--<2D>˿<EFBFBD><CBBF><EFBFBD>ÿ<EFBFBD><C3BF>helloTimeʱ<65><CAB1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͵<EFBFBD><CDB5><EFBFBD><EFBFBD><EFBFBD>BPDU<44><55>
|
|||
|
|
::= { stpDot1dStpPortEntry 12 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortOperP2p OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
true(1),
|
|||
|
|
false(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The operational point-to-point status of the LAN segment attached to this port"
|
|||
|
|
--<2D>˿<EFBFBD>ʵ<EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5>Ե<EFBFBD><D4B5><EFBFBD><EFBFBD><EFBFBD>״̬
|
|||
|
|
::= { stpDot1dStpPortEntry 13 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortOperEdge OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
true(1),
|
|||
|
|
false(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The operational value of the Edge Port parameter"
|
|||
|
|
--<2D>˿<EFBFBD>ʵ<EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD><EFBFBD>ı߽<C4B1><DFBD>˿<EFBFBD>״̬
|
|||
|
|
::= { stpDot1dStpPortEntry 14 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortMcheck OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enable(1)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"force port into transmitting rstp packets"
|
|||
|
|
--ǿ<>ƶ˿ڷ<CBBF><DAB7><EFBFBD>RSTP<54><50><EFBFBD><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 15 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortTxTcn OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Output statistics of TCN packets"
|
|||
|
|
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>TCN<43><4E><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 16 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortTxConfig OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Output statistics of CONFIG packets"
|
|||
|
|
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>CONFIG<49><47><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 17 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortTxRstp OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Output statistics of RSTP packets"
|
|||
|
|
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>RSTP<54><50><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 18 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortRxTcn OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Input statistics of TCN packets"
|
|||
|
|
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>TCN<43><4E><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 19 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortRxConfig OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Input statistics of CONFIG packets"
|
|||
|
|
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>CONFIG<49><47><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 20 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortRxRstp OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Input statistics of RSTP packets"
|
|||
|
|
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>RSTP<54><50><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
|||
|
|
::= { stpDot1dStpPortEntry 21 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortClear OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER{
|
|||
|
|
true(1)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Clear port spanning-tree statistics"
|
|||
|
|
--<2D><><EFBFBD><EFBFBD><EFBFBD>˿<EFBFBD><CBBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͳ<EFBFBD><CDB3><EFBFBD><EFBFBD>Ϣ
|
|||
|
|
::= { stpDot1dStpPortEntry 22 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortAdminP2p OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
forceTrue(1),
|
|||
|
|
forceFalse(2),
|
|||
|
|
auto(3)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The administrative point-to-point status of the LAN segment attached to this port"
|
|||
|
|
--<2D><><EFBFBD>õĶ˿ڵĵ<DAB5><C4B5>Ե<EFBFBD><D4B5><EFBFBD><EFBFBD><EFBFBD>״̬
|
|||
|
|
::= { stpDot1dStpPortEntry 23 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpPortAdminEdge OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enable(1),
|
|||
|
|
disable(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The administrative value of the Edge Port parameter"
|
|||
|
|
--<2D><><EFBFBD>õı߽<C4B1><DFBD>˿<EFBFBD>״̬
|
|||
|
|
::= { stpDot1dStpPortEntry 24 }
|
|||
|
|
|
|||
|
|
spanOnOff OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
enable(1),
|
|||
|
|
disable(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"DURABLE: { enable }
|
|||
|
|
Enable/Disable Spanning Tree for the bridge.
|
|||
|
|
When 'disable(2)', all ports of the device are placed in the
|
|||
|
|
forwarding mode, regardless of current Spanning Tree state.
|
|||
|
|
When 'enable(1)', the normal STP state transitions take place."
|
|||
|
|
::= { stpDot1dStp 17 }
|
|||
|
|
|
|||
|
|
stpDot1wRstpForceVersion OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
ForceStp(0),
|
|||
|
|
ForceRstp(2),
|
|||
|
|
ForceMstp(3)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"which protocol mode the bridge chooses to execute ,RSTP or STP compatible"
|
|||
|
|
--<2D>ŵ<EFBFBD>ǰ<EFBFBD><C7B0>Э<EFBFBD><D0AD>ģʽ<C4A3><CABD>RSTP<54><50><EFBFBD><EFBFBD>STP<54><50><EFBFBD><EFBFBD>ģʽ
|
|||
|
|
::= { stpDot1dStp 19 }
|
|||
|
|
|
|||
|
|
stpDot1dStpTrap OBJECT IDENTIFIER ::= { stpDot1dStp 18 }
|
|||
|
|
----------------------------------------------------------------------------------
|
|||
|
|
--STP TRAP MIB--
|
|||
|
|
----------------------------------------------------------------------------------
|
|||
|
|
|
|||
|
|
stpDot1dStpPortBlocking NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPortState }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port status is turned from forwarding to blocking."
|
|||
|
|
::= { stpDot1dStpTrap 1 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortException NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPort }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port packet flood to CPU rate is too big, port exception happen."
|
|||
|
|
--<2D><><EFBFBD><EFBFBD><EFBFBD>˿ڳ<CBBF><DAB3><EFBFBD>CPU<50>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̫<EFBFBD><CCAB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F2B7A2B3>˿<EFBFBD><CBBF>쳣<EFBFBD><ECB3A3>trap
|
|||
|
|
::= { stpDot1dStpTrap 2 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortRecover NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPort }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port recover time pass after port encounter port CAR exception, and Port packet flood to CPU rate is normal, recover port."
|
|||
|
|
--<2D>˿ڱ<CBBF><DAB1>˿<EFBFBD>CAR<41>رպ<D5BA><F3A3ACB9>˶˿ڻָ<DABB>ʱ<EFBFBD>䣬<EFBFBD><E4A3AC><EFBFBD>Ҹö˿<C3B6><CBBF>³<EFBFBD><C2B3><EFBFBD>CPU<50><55><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>´˿ڣ<CBBF><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ͷ˿ڻָ<DABB>trap
|
|||
|
|
::= { stpDot1dStpTrap 3 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortRmtLoop NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPort }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port is blocked because of remote loop."
|
|||
|
|
--<2D>˿<EFBFBD><CBBF><EFBFBD>ΪԶ<CEAA>˻<EFBFBD><CBBB>ض<EFBFBD><D8B6><EFBFBD>block
|
|||
|
|
::= { stpDot1dStpTrap 4 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortRmtLoopFree NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPort }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port is released from remote loop."
|
|||
|
|
--<2D>˿<EFBFBD>Զ<EFBFBD>˻<EFBFBD><CBBB>ؽ<EFBFBD><D8BD><EFBFBD>
|
|||
|
|
::= { stpDot1dStpTrap 5 }
|
|||
|
|
|
|||
|
|
stpDot1dStpNewRoot NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpDesignatedRoot }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Root bridge changed for the stp."
|
|||
|
|
::= { stpDot1dStpTrap 6 }
|
|||
|
|
|
|||
|
|
stpDot1dStpPortForwarding NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { stpDot1dStpPortState }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port status is turned from blocking to forwarding."
|
|||
|
|
::= { stpDot1dStpTrap 7 }
|
|||
|
|
-- -----------------------------------------------------------------------------
|
|||
|
|
-- STP MIB - Conformance information
|
|||
|
|
-- Not really necessary other than for strict interpretation of SMIv2
|
|||
|
|
-- (and it doesn't hurt anything)
|
|||
|
|
-- -----------------------------------------------------------------------------
|
|||
|
|
stpMIBConformance OBJECT IDENTIFIER ::= { stpMib 2 }
|
|||
|
|
stpMIBGroups OBJECT IDENTIFIER ::= { stpMIBConformance 1 }
|
|||
|
|
stpMIBCompliances OBJECT IDENTIFIER ::= { stpMIBConformance 2 }
|
|||
|
|
|
|||
|
|
stpMIBBaseGroup OBJECT-GROUP
|
|||
|
|
OBJECTS {
|
|||
|
|
stpDot1dStpProtocolSpecification,
|
|||
|
|
stpDot1dStpPriority,
|
|||
|
|
stpDot1dStpTimeSinceTopologyChange,
|
|||
|
|
stpDot1dStpTopChanges,
|
|||
|
|
stpDot1dStpDesignatedRoot,
|
|||
|
|
stpDot1dStpRootCost,
|
|||
|
|
stpDot1dStpRootPort,
|
|||
|
|
stpDot1dStpMaxAge,
|
|||
|
|
stpDot1dStpHelloTime,
|
|||
|
|
stpDot1dStpHoldTime,
|
|||
|
|
stpDot1dStpForwardDelay,
|
|||
|
|
stpDot1dStpBridgeMaxAge,
|
|||
|
|
stpDot1dStpBridgeHelloTime,
|
|||
|
|
stpDot1dStpBridgeForwardDelay,
|
|||
|
|
stpPropStpEnable,
|
|||
|
|
stpDot1dStpPort,
|
|||
|
|
stpDot1dStpPortPriority,
|
|||
|
|
stpDot1dStpPortState,
|
|||
|
|
stpDot1dStpPortEnable,
|
|||
|
|
stpDot1dStpPortPathCost,
|
|||
|
|
stpDot1dStpPortDesignatedRoot,
|
|||
|
|
stpDot1dStpPortDesignatedCost,
|
|||
|
|
stpDot1dStpPortDesignatedBridge,
|
|||
|
|
stpDot1dStpPortDesignatedPort,
|
|||
|
|
stpDot1dStpPortForwardTransitions
|
|||
|
|
}
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"STP module groups."
|
|||
|
|
::= { stpMIBGroups 1 }
|
|||
|
|
|
|||
|
|
-- -----------------------------------------------------------------------------
|
|||
|
|
-- STP MIB - Compliance information
|
|||
|
|
-- -----------------------------------------------------------------------------
|
|||
|
|
stpMIBCompliance MODULE-COMPLIANCE
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The compliance statement for STP module."
|
|||
|
|
MODULE
|
|||
|
|
MANDATORY-GROUPS {
|
|||
|
|
stpMIBBaseGroup
|
|||
|
|
}
|
|||
|
|
::= { stpMIBCompliances 1 }
|
|||
|
|
|
|||
|
|
END
|
|||
|
|
|
|||
|
|
|