10070 lines
310 KiB
Plaintext
10070 lines
310 KiB
Plaintext
|
-- **************************************************************************
|
||
|
|
-- * *
|
||
|
|
-- * *
|
||
|
|
-- * Hirschmann Automation and Control GmbH *
|
||
|
|
-- * *
|
||
|
|
-- * PLATFORM SNMP PRIVATE MIB *
|
||
|
|
-- * *
|
||
|
|
-- * Chassis and Agent *
|
||
|
|
-- * *
|
||
|
|
-- * *
|
||
|
|
-- **************************************************************************
|
||
|
|
-- * *
|
||
|
|
-- * Dies ist eine SNMP MIB fuer Hirschmann Platform Geraete. *
|
||
|
|
-- * *
|
||
|
|
-- * Sollten Sie weitere Fragen haben, wenden Sie sich bitte an ihren *
|
||
|
|
-- * Hirschmann-Vertragspartner. *
|
||
|
|
-- * *
|
||
|
|
-- * Aktuelle Hirschmann-Infos zu unseren Produkten erhalten Sie ueber *
|
||
|
|
-- * unseren WWW-Server unter http://www.hirschmann.com *
|
||
|
|
-- * *
|
||
|
|
-- * This is a SNMP MIB for the Hirschmann Platform devices. *
|
||
|
|
-- * *
|
||
|
|
-- * If you have any further questions please contact your *
|
||
|
|
-- * Hirschmann contractual partner. *
|
||
|
|
-- * *
|
||
|
|
-- * You can access current information about Hirschmann products *
|
||
|
|
-- * via our WWW server on http://www.hirschmann.com *
|
||
|
|
-- * *
|
||
|
|
-- **************************************************************************
|
||
|
|
|
||
|
|
HMPRIV-MGMT-SNMP-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY,
|
||
|
|
enterprises, IpAddress, Integer32, Counter32, TimeTicks
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION, MacAddress, DisplayString,
|
||
|
|
TruthValue,RowStatus FROM SNMPv2-TC
|
||
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC4001
|
||
|
|
dot1dStaticAddress FROM BRIDGE-MIB
|
||
|
|
AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
|
||
|
|
TimeFilter FROM RMON2-MIB
|
||
|
|
ifIndex FROM IF-MIB;
|
||
|
|
|
||
|
|
hmConfiguration MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201209041200Z" -- 04 Sep 2012 12:00:00 GMT
|
||
|
|
ORGANIZATION "Hirschmann Automation and Control GmbH"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Customer Support
|
||
|
|
Postal:
|
||
|
|
Hirschmann Automation and Control GmbH
|
||
|
|
Stuttgarter Str. 45-51
|
||
|
|
72654 Neckartenzlingen
|
||
|
|
Germany
|
||
|
|
Tel: +49 7127 14 1981
|
||
|
|
Web: http://www.hicomcenter.com/
|
||
|
|
E-Mail: hicomcenter@hirschmann.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"The Hirschmann Private MIB definitions for Platform devices."
|
||
|
|
|
||
|
|
-- Revision history.
|
||
|
|
REVISION
|
||
|
|
"200806031200Z" -- 03 Jun 2008 12:00:00 GMT
|
||
|
|
DESCRIPTION
|
||
|
|
"Update for Eagle 20 version 04.3.00"
|
||
|
|
REVISION
|
||
|
|
"200712111200Z" -- 11 Dec 2007 12:00:00 GMT
|
||
|
|
DESCRIPTION
|
||
|
|
"Update for plattform version 04.1.00"
|
||
|
|
REVISION
|
||
|
|
"200709131200Z" -- 13 Sep 2007 12:00:00 GMT
|
||
|
|
DESCRIPTION
|
||
|
|
"First release in SMIv2"
|
||
|
|
REVISION
|
||
|
|
"201001291200Z" -- 29 Jan 2010 12:00:00 GMT
|
||
|
|
DESCRIPTION
|
||
|
|
"29.01.2010/HG: hmRestrictedMgtAccessGroup added"
|
||
|
|
REVISION
|
||
|
|
"201209041200Z" -- 04 Sep 2012 12:00:00 GMT
|
||
|
|
DESCRIPTION
|
||
|
|
"Update for platform version 07.1.04: hmGmrpUnknownMode added"
|
||
|
|
::= { hirschmann 14 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Textual Conventions
|
||
|
|
HmAgentLogSeverity ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Severity code used in determining the SysLog Priority value."
|
||
|
|
REFERENCE "RFC3164 - 4.1.1: Table 2"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
emergency(0), -- System is unusable. System failure has occurred.
|
||
|
|
alert(1), -- Action must be taken immediately. Unrecoverable
|
||
|
|
-- failure of a component. System failure likely.
|
||
|
|
critical(2), -- Critical conditions. Recoverable failure of a
|
||
|
|
-- component that may lead to system failure.
|
||
|
|
error(3), -- Error conditions. Recoverable failure of a component.
|
||
|
|
warning(4), -- Warning conditions. Minor failure, e.g.
|
||
|
|
-- misconfiguration of a component.
|
||
|
|
notice(5), -- Normal but significant conditions.
|
||
|
|
informational(6), -- Informational messages.
|
||
|
|
debug(7) -- Debug-level messages.
|
||
|
|
}
|
||
|
|
|
||
|
|
LEDState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Color of the LED"
|
||
|
|
SYNTAX INTEGER { off(1), green(2), yellow(3), red(4) }
|
||
|
|
|
||
|
|
DIPSwitchState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status of the DIP switch."
|
||
|
|
SYNTAX INTEGER { on(1), off(2) }
|
||
|
|
|
||
|
|
-- MonitorConfig ::= TEXTUAL-CONVENTION
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Monitor configuration"
|
||
|
|
-- SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
|
||
|
|
|
||
|
|
PTPTimeInterval ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The scaledNanoseconds member is the time interval expressed in units of nanoseconds and multiplied by
|
||
|
|
2^+16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the
|
||
|
|
largest positive and negative values of the data type respectively.
|
||
|
|
For example: 2.5 ns is expressed as: (hex) 0x0000 0000 0002 8000"
|
||
|
|
REFERENCE
|
||
|
|
"IEEE P1588 D2.21 Draft Standard for a Precision Clock
|
||
|
|
Synchronization Protocol for Networked
|
||
|
|
Measurement and Control Systems page 18"
|
||
|
|
SYNTAX OCTET STRING (SIZE (8))
|
||
|
|
|
||
|
|
PTPPortIdentity ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The PTPPortIdentity type identifies a PTP port.
|
||
|
|
The first 8 octets within this value specifies the ClockIdentity.
|
||
|
|
The last 2 octetes within this value specifies the port number.
|
||
|
|
For example: '00 80 63 FF FF 00 00 00 00 01'. ClockIdentity is
|
||
|
|
'008063FFFF000000' and port number is '0001'"
|
||
|
|
REFERENCE
|
||
|
|
"IEEE P1588 D2.21 Draft Standard for a Precision Clock
|
||
|
|
Synchronization Protocol for Networked
|
||
|
|
Measurement and Control Systems page 19"
|
||
|
|
SYNTAX OCTET STRING (SIZE (10))
|
||
|
|
|
||
|
|
PTPClockIdentity ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The PTPClockIdentity type identifies a PTP clock.
|
||
|
|
The PTPClockIdentity shall be in the IEEE EUI-64
|
||
|
|
format.
|
||
|
|
For example: '008063FFFF000000'"
|
||
|
|
REFERENCE
|
||
|
|
"IEEE P1588 D2.21 Draft Standard for a Precision Clock
|
||
|
|
Synchronization Protocol for Networked
|
||
|
|
Measurement and Control Systems page 19"
|
||
|
|
SYNTAX OCTET STRING (SIZE (8))
|
||
|
|
|
||
|
|
PTPClockQuality ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The PTPClockQuality represents the quality of a clock.
|
||
|
|
The first octet represents the clock class. The second
|
||
|
|
octet represents the clockAccuracy and the last two octets
|
||
|
|
represent the offsetScaledLogVariance
|
||
|
|
For example: "
|
||
|
|
REFERENCE
|
||
|
|
"IEEE P1588 D2.21 Draft Standard for a Precision Clock
|
||
|
|
Synchronization Protocol for Networked
|
||
|
|
Measurement and Control Systems page 19"
|
||
|
|
SYNTAX OCTET STRING (SIZE (4))
|
||
|
|
|
||
|
|
BridgeIdOrNull ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Bridge-Identifier as used in the Spanning Tree or Null, if
|
||
|
|
no valid data is available"
|
||
|
|
SYNTAX OCTET STRING (SIZE (0|8))
|
||
|
|
|
||
|
|
hirschmann OBJECT IDENTIFIER ::= { enterprises 248 }
|
||
|
|
hmChassis OBJECT IDENTIFIER ::= { hmConfiguration 1 }
|
||
|
|
hmAgent OBJECT IDENTIFIER ::= { hmConfiguration 2 }
|
||
|
|
hmProducts OBJECT IDENTIFIER ::= { hmConfiguration 10 }
|
||
|
|
rs2 OBJECT IDENTIFIER ::= { hmProducts 2 }
|
||
|
|
mach3000 OBJECT IDENTIFIER ::= { hmProducts 3 }
|
||
|
|
ms2108-2 OBJECT IDENTIFIER ::= { hmProducts 4 }
|
||
|
|
ms3124-4 OBJECT IDENTIFIER ::= { hmProducts 5 }
|
||
|
|
rs2-16 OBJECT IDENTIFIER ::= { hmProducts 6 }
|
||
|
|
rs2-4r OBJECT IDENTIFIER ::= { hmProducts 7 }
|
||
|
|
ms4128-5 OBJECT IDENTIFIER ::= { hmProducts 10 }
|
||
|
|
eagle OBJECT IDENTIFIER ::= { hmProducts 20 }
|
||
|
|
rr-epl OBJECT IDENTIFIER ::= { hmProducts 21 }
|
||
|
|
eagle-mguard OBJECT IDENTIFIER ::= { hmProducts 22 }
|
||
|
|
eagle20 OBJECT IDENTIFIER ::= { hmProducts 23 }
|
||
|
|
ms20 OBJECT IDENTIFIER ::= { hmProducts 30 }
|
||
|
|
ms30 OBJECT IDENTIFIER ::= { hmProducts 31 }
|
||
|
|
rs20 OBJECT IDENTIFIER ::= { hmProducts 40 }
|
||
|
|
rs30 OBJECT IDENTIFIER ::= { hmProducts 41 } -- Also valid for cs30, rs40
|
||
|
|
-- Not used: rs40 OBJECT IDENTIFIER ::= { hmProducts 42 }
|
||
|
|
-- Not used: cs30 OBJECT IDENTIFIER ::= { hmProducts 43 }
|
||
|
|
rsb20 OBJECT IDENTIFIER ::= { hmProducts 44 }
|
||
|
|
osb20 OBJECT IDENTIFIER ::= { hmProducts 45 }
|
||
|
|
|
||
|
|
mach4002-48-4G OBJECT IDENTIFIER ::= { hmProducts 50 }
|
||
|
|
octopus OBJECT IDENTIFIER ::= { hmProducts 60 }
|
||
|
|
mach4002-24G OBJECT IDENTIFIER ::= { hmProducts 70 }
|
||
|
|
mach4002-24G-3X OBJECT IDENTIFIER ::= { hmProducts 71 }
|
||
|
|
mach4002-48G OBJECT IDENTIFIER ::= { hmProducts 75 }
|
||
|
|
mach4002-48G-3X OBJECT IDENTIFIER ::= { hmProducts 76 }
|
||
|
|
ruggedswitch OBJECT IDENTIFIER ::= { hmProducts 90 }
|
||
|
|
railswitchrugged OBJECT IDENTIFIER ::= { hmProducts 100 }
|
||
|
|
mach100 OBJECT IDENTIFIER ::= { hmProducts 110 }
|
||
|
|
octopus-os OBJECT IDENTIFIER ::= { hmProducts 120 }
|
||
|
|
mach100ge OBJECT IDENTIFIER ::= { hmProducts 130 }
|
||
|
|
mach1000ge OBJECT IDENTIFIER ::= { hmProducts 131 }
|
||
|
|
eem1 OBJECT IDENTIFIER ::= { hmProducts 200 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / SystemTable --
|
||
|
|
--
|
||
|
|
hmSystemTable OBJECT IDENTIFIER ::= { hmChassis 1 }
|
||
|
|
|
||
|
|
hmSysProduct OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rs2-tx-tx(1),
|
||
|
|
rs2-fx-fx(2),
|
||
|
|
rs2-fxsm-fxsm(3),
|
||
|
|
mach3002(10),
|
||
|
|
mach3005(11),
|
||
|
|
mach3001(12),
|
||
|
|
ms2108-2(20),
|
||
|
|
ms3124-4(21),
|
||
|
|
rs2-16m(100),
|
||
|
|
rs2-15m(101),
|
||
|
|
rs2-14m(102),
|
||
|
|
rs2-16m-1mm-sc(110),
|
||
|
|
rs2-16m-1sm-sc(111),
|
||
|
|
rs2-16m-1lh-sc(112),
|
||
|
|
rs2-15m-1mm-sc(120),
|
||
|
|
rs2-15m-1sm-sc(121),
|
||
|
|
rs2-15m-1lh-sc(122),
|
||
|
|
rs2-16m-2mm-sc(130),
|
||
|
|
rs2-16m-2sm-sc(131),
|
||
|
|
rs2-16m-2lh-sc(132),
|
||
|
|
rs2-16m-1mm-sc-1sm-sc(140),
|
||
|
|
rs2-16m-1mm-sc-1lh-sc(141),
|
||
|
|
rs2-16m-1sm-sc-1lh-sc(142),
|
||
|
|
rs2-8m(200),
|
||
|
|
rs2-7m(201),
|
||
|
|
rs2-6m(202),
|
||
|
|
rs2-8m-1mm-sc(210),
|
||
|
|
rs2-8m-1sm-sc(211),
|
||
|
|
rs2-8m-1lh-sc(212),
|
||
|
|
rs2-7m-1mm-sc(220),
|
||
|
|
rs2-7m-1sm-sc(221),
|
||
|
|
rs2-7m-1lh-sc(222),
|
||
|
|
rs2-8m-2mm-sc(230),
|
||
|
|
rs2-8m-2sm-sc(231),
|
||
|
|
rs2-8m-2lh-sc(232),
|
||
|
|
rs2-8m-1mm-sc-1sm-sc(240),
|
||
|
|
rs2-8m-1mm-sc-1lh-sc(241),
|
||
|
|
rs2-8m-1sm-sc-1lh-sc(242),
|
||
|
|
rs2-4r(300),
|
||
|
|
rs2-4r-1mm-sc(301),
|
||
|
|
rs2-4r-1sm-sc(302),
|
||
|
|
rs2-4r-1lh-sc(303),
|
||
|
|
rs2-4r-1fl-st(304),
|
||
|
|
rs2-4r-2mm-sc(311),
|
||
|
|
rs2-4r-2sm-sc(312),
|
||
|
|
rs2-4r-2lh-sc(313),
|
||
|
|
ms4128-5(401),
|
||
|
|
mach4002-48-4G(410),
|
||
|
|
mach4002-24G(420),
|
||
|
|
mach4002-24G-3X(421),
|
||
|
|
mach4002-48G(425),
|
||
|
|
mach4002-48G-3X(426),
|
||
|
|
eagle-tx-tx(500),
|
||
|
|
eagle-tx-mm-sc(501),
|
||
|
|
eagle-tx-sm-sc(502),
|
||
|
|
eagle-tx-lh-sc(503),
|
||
|
|
eagle-mm-sc-tx(504),
|
||
|
|
eagle-mm-sc-mm-sc(505),
|
||
|
|
eagle-mm-sc-sm-sc(506),
|
||
|
|
eagle-mm-sc-lh-sc(507),
|
||
|
|
eagle-fw-tx-tx(520),
|
||
|
|
eagle-fw-tx-mm-sc(521),
|
||
|
|
eagle-fw-tx-sm-sc(522),
|
||
|
|
eagle-fw-tx-lh-sc(523),
|
||
|
|
eagle-fw-mm-sc-tx(524),
|
||
|
|
eagle-fw-mm-sc-mm-sc(525),
|
||
|
|
eagle-fw-mm-sc-sm-sc(526),
|
||
|
|
eagle-fw-mm-sc-lh-sc(527),
|
||
|
|
eagle-mguard-tx-tx(530),
|
||
|
|
eagle-mguard-tx-mm-sc(531),
|
||
|
|
eagle-mguard-tx-sm-sc(532),
|
||
|
|
eagle-mguard-tx-lh-sc(533),
|
||
|
|
eagle-mguard-mm-sc-tx(534),
|
||
|
|
eagle-mguard-mm-sc-mm-sc(535),
|
||
|
|
eagle-mguard-mm-sc-sm-sc(536),
|
||
|
|
eagle-mguard-mm-sc-lh-sc(537),
|
||
|
|
eagle20-tx-tx(540),
|
||
|
|
eagle20-tx-mm-sc(541),
|
||
|
|
eagle20-tx-sm-sc(542),
|
||
|
|
eagle20-tx-lh-sc(543),
|
||
|
|
eagle20-mm-sc-tx(544),
|
||
|
|
eagle20-mm-sc-mm-sc(545),
|
||
|
|
eagle20-mm-sc-sm-sc(546),
|
||
|
|
eagle20-mm-sc-lh-sc(547),
|
||
|
|
rr-epl-tx-tx(550),
|
||
|
|
rr-epl-tx-mm-sc(551),
|
||
|
|
ms20-0800(600),
|
||
|
|
ms20-2400(601),
|
||
|
|
ms30-0802(620),
|
||
|
|
ms30-2402(621),
|
||
|
|
rs20-0400(700),
|
||
|
|
rs20-0400m1(701),
|
||
|
|
rs20-0400m2(702),
|
||
|
|
rs20-0800(703),
|
||
|
|
rs20-0800m2(704),
|
||
|
|
rs20-1600(705),
|
||
|
|
rs20-1600m2(706),
|
||
|
|
rs20-2400(707),
|
||
|
|
rs20-2400m2(708),
|
||
|
|
rs20-0900m3(709),
|
||
|
|
rs20-1700m3(710),
|
||
|
|
rs20-2500m3(711),
|
||
|
|
rs30-0802(720),
|
||
|
|
rs30-1602(721),
|
||
|
|
rs30-2402(722),
|
||
|
|
rs30-0802m4(723),
|
||
|
|
rs30-1602m4(724),
|
||
|
|
rs30-2402m4(725),
|
||
|
|
rsb20-8tx(730),
|
||
|
|
rsb20-8tx-1fx(731),
|
||
|
|
rsb20-6tx-2fx(732),
|
||
|
|
rsb20-6tx-3fx(733),
|
||
|
|
rsb20-6tx-3sfp(734),
|
||
|
|
rs40-0009(740),
|
||
|
|
cs30-0202(780),
|
||
|
|
octopus-8m(800),
|
||
|
|
octopus-16m(801),
|
||
|
|
octopus-24m(802),
|
||
|
|
octopus-8m-2g(803),
|
||
|
|
octopus-16m-2g(804),
|
||
|
|
os-000800(810),
|
||
|
|
os-000802(811),
|
||
|
|
os-001000(812),
|
||
|
|
osb20-9tx (820),
|
||
|
|
osb24-9tx-8poe (821),
|
||
|
|
osb20-10tx (822),
|
||
|
|
osb24-10tx-8poe (823),
|
||
|
|
mar1020(900),
|
||
|
|
mar1030(901),
|
||
|
|
mar1030-4g(902),
|
||
|
|
mar1022(903),
|
||
|
|
mar1032(904),
|
||
|
|
mar1032-4g(905),
|
||
|
|
mar1120(906),
|
||
|
|
mar1130(907),
|
||
|
|
mar1130-4g(908),
|
||
|
|
mar1122(909),
|
||
|
|
mar1132(910),
|
||
|
|
mar1132-4g(911),
|
||
|
|
mar1040(912),
|
||
|
|
mar1042(913),
|
||
|
|
mar1140(914),
|
||
|
|
mar1142(915),
|
||
|
|
rsr30-07sfp-03sfp (1000),
|
||
|
|
rsr30-06tp-03combo (1001),
|
||
|
|
rsr30-06tp-02sfp-02combo (1002),
|
||
|
|
rsr30-06tp-02sfp-02sfp (1003),
|
||
|
|
rsr30-08tp-02combo (1004),
|
||
|
|
rsr30-08tp-02sfp (1005),
|
||
|
|
rsr20-06tp-03fx (1006),
|
||
|
|
rsr20-06tp-02fx (1007),
|
||
|
|
rsr20-08tp (1008),
|
||
|
|
mach100(1100),
|
||
|
|
mach104-20tx-f (1101),
|
||
|
|
mach104-20tx-fr (1102),
|
||
|
|
mach104-20tx-f-4poe (1103),
|
||
|
|
mach104-16tx-poep (1104),
|
||
|
|
mach104-16tx-poep-r (1105),
|
||
|
|
mach104-16tx-poep-e (1106),
|
||
|
|
mach104-16tx-poep-2x (1107),
|
||
|
|
mach104-16tx-poep-2x-r (1108),
|
||
|
|
mach104-16tx-poep-2x-e(1109),
|
||
|
|
eem1 (1200)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Manufacturer-defined product identifier."
|
||
|
|
::= { hmSystemTable 1 }
|
||
|
|
|
||
|
|
hmSysVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is a string that contains at least the
|
||
|
|
following data :
|
||
|
|
SW: Version number of software
|
||
|
|
CH: Version number of chassis
|
||
|
|
BP: Version number of backplane"
|
||
|
|
::= { hmSystemTable 2 }
|
||
|
|
|
||
|
|
hmSysGroupCapacity OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hmSysGroupCapacity is the number of groups that can
|
||
|
|
be contained within the chassis. Within each managed
|
||
|
|
chassis/switch, the groups are uniquely numbered in the
|
||
|
|
range from 1 to hmSysGroupCapacity.
|
||
|
|
|
||
|
|
Some groups may not be present in the chassis, in which
|
||
|
|
case the actual number of groups present will be less than
|
||
|
|
hmSysGroupCapacity. The number of groups present will never be
|
||
|
|
greater than hmSysGroupCapacity."
|
||
|
|
::= { hmSystemTable 3 }
|
||
|
|
|
||
|
|
hmSysGroupMap OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This string represents the current configuration of the chassis,
|
||
|
|
encoded as an octet string. Each module is represented by a
|
||
|
|
single octet. If the value of a single octet is the ascii representation
|
||
|
|
of the character '1', it indicates that the module represented
|
||
|
|
by that octet is present, if '0', the module is absent.
|
||
|
|
The number of octets in the string is given by hmSysGroupCapacity.
|
||
|
|
If the value of this variable changes, a hmGroupMapChange trap
|
||
|
|
is sent."
|
||
|
|
::= { hmSystemTable 4 }
|
||
|
|
|
||
|
|
hmSysMaxPowerSupply OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of power supplies for this chassis. Within
|
||
|
|
each managed chassis/switch, the groups are uniquely numbered
|
||
|
|
in the range from 1 to hmSysMaxPowerSupply."
|
||
|
|
::= { hmSystemTable 5 }
|
||
|
|
|
||
|
|
hmSysMaxFan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of fans for this chassis. Within each managed
|
||
|
|
chassis/switch, the fans are uniquely numbered in the range
|
||
|
|
from 0 to hmSysMaxFan."
|
||
|
|
::= { hmSystemTable 6 }
|
||
|
|
|
||
|
|
hmSysGroupModuleCapacity OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of modules that an individual group can
|
||
|
|
contain in this system."
|
||
|
|
::= { hmSystemTable 7 }
|
||
|
|
|
||
|
|
hmSysModulePortCapacity OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of ports that an individual module can
|
||
|
|
contain in this system."
|
||
|
|
::= { hmSystemTable 8 }
|
||
|
|
|
||
|
|
hmSysGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSysGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for a closer description of
|
||
|
|
a group."
|
||
|
|
::= { hmSystemTable 9 }
|
||
|
|
|
||
|
|
hmSysGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSysGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmSysGroupTable."
|
||
|
|
INDEX { hmSysGroupID }
|
||
|
|
::= { hmSysGroupTable 1 }
|
||
|
|
|
||
|
|
HmSysGroupEntry ::= SEQUENCE {
|
||
|
|
hmSysGroupID Integer32,
|
||
|
|
hmSysGroupType INTEGER,
|
||
|
|
hmSysGroupDescription DisplayString,
|
||
|
|
hmSysGroupHwVersion DisplayString,
|
||
|
|
hmSysGroupSwVersion DisplayString,
|
||
|
|
hmSysGroupModuleMap DisplayString,
|
||
|
|
hmSysGroupAction INTEGER,
|
||
|
|
hmSysGroupActionResult Integer32,
|
||
|
|
hmSysGroupIsolateMode INTEGER,
|
||
|
|
hmSysGroupSerialNum DisplayString,
|
||
|
|
hmSysGroupActionDelayPreset Integer32,
|
||
|
|
hmSysGroupActionDelayCurrent Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSysGroupID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..5)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface card. This value is never
|
||
|
|
greater than hmSysGroupCapacity."
|
||
|
|
::= { hmSysGroupEntry 1 }
|
||
|
|
|
||
|
|
hmSysGroupType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
m-basic4 (10),
|
||
|
|
ms2108-2 (20),
|
||
|
|
ms3124-4 (21),
|
||
|
|
rs2 (22),
|
||
|
|
ms4128-5 (23),
|
||
|
|
ms20 (30),
|
||
|
|
ms30 (31),
|
||
|
|
rs20 (40),
|
||
|
|
rs30 (41),
|
||
|
|
rs40 (42),
|
||
|
|
rsb20 (44),
|
||
|
|
osb2x (45),
|
||
|
|
mach4002-48-4G (50),
|
||
|
|
octopus (60),
|
||
|
|
mach4002-24G (70),
|
||
|
|
mach4002-24G-3X (71),
|
||
|
|
mach4002-48G (75),
|
||
|
|
mach4002-48G-3X (76),
|
||
|
|
ruggedswitch (90),
|
||
|
|
railswitchrugged (100),
|
||
|
|
mach100 (110),
|
||
|
|
mach100ge (130),
|
||
|
|
mach1000ge (131),
|
||
|
|
eem1 (200)
|
||
|
|
}
|
||
|
|
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of interface card."
|
||
|
|
::= { hmSysGroupEntry 2 }
|
||
|
|
|
||
|
|
hmSysGroupDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description of interface card."
|
||
|
|
::= { hmSysGroupEntry 3 }
|
||
|
|
|
||
|
|
hmSysGroupHwVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Hardware version of interface card."
|
||
|
|
::= { hmSysGroupEntry 4 }
|
||
|
|
|
||
|
|
hmSysGroupSwVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Software version of interface card."
|
||
|
|
::= { hmSysGroupEntry 5 }
|
||
|
|
|
||
|
|
hmSysGroupModuleMap OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This string represents the current configuration of a group,
|
||
|
|
encoded as an octet string. Each module is represented by a
|
||
|
|
single octet. If the value of a single octet is the ascii representation
|
||
|
|
of the character '1', it indicates that the module represented
|
||
|
|
by that octet is present, if '0', the module is absent. If the character is
|
||
|
|
'C', then the card is configurable but absent. The ports can be configured
|
||
|
|
and by setting hmSysModStatus to remove(3) the card can be logically
|
||
|
|
removed. The number of bytes in the string is given by
|
||
|
|
hmSysGroupModuleCapacity."
|
||
|
|
::= { hmSysGroupEntry 6 }
|
||
|
|
|
||
|
|
hmSysGroupAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
reset (2),
|
||
|
|
resetStats(3),
|
||
|
|
resetFDB(4),
|
||
|
|
resetARP(5),
|
||
|
|
resetL3Stats(6),
|
||
|
|
resetL4-7Stats(7),
|
||
|
|
hotRestart(10)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object, when read, always returns a value of other(1).
|
||
|
|
A value of reset(2) has the same effect as a power-on sequence
|
||
|
|
(coldstart). When set to resetStats(3), a reset of all statistic
|
||
|
|
counters of the card's ports will be forced. Any other value
|
||
|
|
results in a badValue status code."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { hmSysGroupEntry 7 }
|
||
|
|
|
||
|
|
hmSysGroupActionResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the last activated action. A value of zero
|
||
|
|
indicates that the result is ok. Bits set in the result
|
||
|
|
indicate error conditions."
|
||
|
|
::= { hmSysGroupEntry 8 }
|
||
|
|
|
||
|
|
hmSysGroupIsolateMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Setting this variable to enable(1) separates the group from
|
||
|
|
the rest of the chassis, so that it will act like a
|
||
|
|
standalone-switch."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSysGroupEntry 9 }
|
||
|
|
|
||
|
|
hmSysGroupSerialNum OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The serial number provided by vendor (ASCII). "
|
||
|
|
::= { hmSysGroupEntry 10 }
|
||
|
|
|
||
|
|
hmSysGroupActionDelayPreset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Time in seconds until a reset(2) or
|
||
|
|
hotRestart(10) that was triggered over
|
||
|
|
the hmSysGroupAction object is executed. Writing
|
||
|
|
a zero will cancel any scheduled reset."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmSysGroupEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSysGroupActionDelayCurrent OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If a delayed reset is scheduled this object
|
||
|
|
will incrementing from the start value to zero."
|
||
|
|
::= { hmSysGroupEntry 12 }
|
||
|
|
|
||
|
|
hmSysModuleTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSysModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for a closer description of a
|
||
|
|
module."
|
||
|
|
::= { hmSystemTable 10 }
|
||
|
|
|
||
|
|
hmSysModuleEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSysModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmSysModuleTable."
|
||
|
|
INDEX { hmSysModGroupID, hmSysModID }
|
||
|
|
::= { hmSysModuleTable 1 }
|
||
|
|
|
||
|
|
HmSysModuleEntry ::= SEQUENCE {
|
||
|
|
hmSysModGroupID Integer32,
|
||
|
|
hmSysModID Integer32,
|
||
|
|
hmSysModType INTEGER,
|
||
|
|
hmSysModDescription DisplayString,
|
||
|
|
hmSysModVersion DisplayString,
|
||
|
|
hmSysModNumOfPorts Integer32,
|
||
|
|
hmSysModFirstMauIndex Integer32,
|
||
|
|
hmSysModStatus INTEGER,
|
||
|
|
hmSysModSerialNum DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSysModGroupID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..5)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface card. This value is never
|
||
|
|
greater than hmSysGroupCapacity."
|
||
|
|
::= { hmSysModuleEntry 1 }
|
||
|
|
|
||
|
|
hmSysModID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify a module on an interface card. This value
|
||
|
|
is never greater than hmSysGroupModuleCapacity."
|
||
|
|
::= { hmSysModuleEntry 2 }
|
||
|
|
|
||
|
|
hmSysModType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
m-fast-8tp-rj (100),
|
||
|
|
m-fast-8mm-mt (101),
|
||
|
|
m-fast-2mm-sc (102),
|
||
|
|
m-fast-2sm-sc (103),
|
||
|
|
m-eth-4mm-st (104),
|
||
|
|
m-giga-2sx-sc (200),
|
||
|
|
m-giga-1lx-sc (201),
|
||
|
|
m-router (300),
|
||
|
|
m-giga-2sx-sc-2 (400),
|
||
|
|
m-giga-1lx-sc-2 (401),
|
||
|
|
m-giga-2tp-rj (402),
|
||
|
|
mm2-4tx1 (1000),
|
||
|
|
mm2-2flm4 (1001),
|
||
|
|
mm2-2fls4 (1002),
|
||
|
|
mm3-4flm4 (1003),
|
||
|
|
mm3-4fls4 (1004),
|
||
|
|
mm3-2aui (1005),
|
||
|
|
mm3-4tx5 (1006),
|
||
|
|
mm2-4fxm3 (1100),
|
||
|
|
mm2-2fxm2 (1101),
|
||
|
|
mm2-2fxs2 (1102),
|
||
|
|
mm3-4fxm2 (1103),
|
||
|
|
mm3-4fxs2 (1104),
|
||
|
|
mm3-4fxm4 (1105),
|
||
|
|
mm2-2fxp4 (1106),
|
||
|
|
mm3-4fxp4 (1107),
|
||
|
|
mm2-2fxm3-2tx1 (1201),
|
||
|
|
mm3-2fxm2-2tx1 (1202),
|
||
|
|
mm3-2fxs2-2tx1 (1203),
|
||
|
|
mm3-1fxl2-3tx1 (1204),
|
||
|
|
mm3-1fxs2-3tx1 (1205),
|
||
|
|
mm3-1fxm2-3tx1 (1206),
|
||
|
|
mm3-2fxm4-2tx1 (1207),
|
||
|
|
mm3-3tx1-1fxm2 (1208), -- Only on Octopus
|
||
|
|
mm3-4tx5-relay (1209), -- Octopus Train with relay
|
||
|
|
mm3-3fxxx-1tx1 (1299),
|
||
|
|
mm3-4tx1-rt (1300),
|
||
|
|
mm3-2fxm2-2tx1-rt (1301),
|
||
|
|
mm3-2fxs2-2tx1-rt (1302),
|
||
|
|
mm3-2flm3-2tx1-rt (1303),
|
||
|
|
mm4-4tx-sfp (1401),
|
||
|
|
mm4-2tx-sfp (1402),
|
||
|
|
mm3-4tx1-poe (1403),
|
||
|
|
mm3-4sfp (1404),
|
||
|
|
mm3-4tx5-poe (1405), -- Only on Octopus
|
||
|
|
mm3-3tx5-poe-1tx5 (1406), -- Only on Octopus
|
||
|
|
mm23-t1t1t1t1 (1407),
|
||
|
|
mm23-m2m2t1t1 (1408),
|
||
|
|
mm23-s2s2t1t1 (1409),
|
||
|
|
mm23-f4f4t1t1 (1410),
|
||
|
|
mm33-07079999 (1411),
|
||
|
|
mm4-2tx-sfp-giga (1412), -- Only on Octopus
|
||
|
|
mm4-2tx-giga (1413), -- Only on Octopus
|
||
|
|
m4-8tp-rj45 (1501),
|
||
|
|
m4-fast-8sfp (1502),
|
||
|
|
m4-fast-8tp-rj45-poe (1503),
|
||
|
|
m4-giga-8sfp (1550),
|
||
|
|
m4-base-giga-4tp-sfp (1600),
|
||
|
|
m4-base-fast-16tp (1601),
|
||
|
|
m4-base-48g-16tp (1610),
|
||
|
|
m4-base-48g-8tp-sfp-8tp (1611),
|
||
|
|
m4-base-48g-3xfp (1612),
|
||
|
|
m4-base-24g-8tp (1613),
|
||
|
|
m4-base-24g-8tp-sfp (1614),
|
||
|
|
m4-base-24g-3xfp (1615),
|
||
|
|
mach102-8tp (1701),
|
||
|
|
m1-8tp-rj45 (1702),
|
||
|
|
m1-8mm-sc (1703),
|
||
|
|
m1-8sm-sc (1704),
|
||
|
|
m1-8sfp (1705),
|
||
|
|
mach104-20tx-f (1706),
|
||
|
|
mach104-20tx-fr (1707),
|
||
|
|
mach104-20tx-f-4poe (1708),
|
||
|
|
m1-8tp-rj45-poe (1709),
|
||
|
|
mach104-16tx-poep (1710),
|
||
|
|
mach104-16tx-poep-r (1711),
|
||
|
|
mach104-16tx-poep-e (1712),
|
||
|
|
mach104-16tx-poep-2x (1713),
|
||
|
|
mach104-16tx-poep-2x-r (1714),
|
||
|
|
mach104-16tx-poep-2x-e(1715),
|
||
|
|
mar1040 (1750),
|
||
|
|
mar1042 (1751),
|
||
|
|
mar1140 (1752),
|
||
|
|
mar1142 (1753),
|
||
|
|
mm20-ioioioio (1850)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of a module."
|
||
|
|
::= { hmSysModuleEntry 3 }
|
||
|
|
|
||
|
|
hmSysModDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description of the module."
|
||
|
|
::= { hmSysModuleEntry 4 }
|
||
|
|
|
||
|
|
hmSysModVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"version of the module."
|
||
|
|
::= { hmSysModuleEntry 5 }
|
||
|
|
|
||
|
|
hmSysModNumOfPorts OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The numberOfPorts is the number of ports contained within
|
||
|
|
the module. Within each module, the ports are uniquely
|
||
|
|
numbered in the range from 1 to numberOfPorts."
|
||
|
|
::= { hmSysModuleEntry 6 }
|
||
|
|
|
||
|
|
hmSysModFirstMauIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"value of the first mauIndex used by the module."
|
||
|
|
::= { hmSysModuleEntry 7 }
|
||
|
|
|
||
|
|
hmSysModStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
physical (1),
|
||
|
|
configurable (2),
|
||
|
|
remove (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"status of hot-pluggable modules, only for PowerMICE.
|
||
|
|
If the value is physical(1), then the module is plugged in,
|
||
|
|
if the value is configurable, the ports can be configured,
|
||
|
|
but the card is absent, with the value remove(3) written to
|
||
|
|
the agent the card can be logically removed."
|
||
|
|
::= { hmSysModuleEntry 8 }
|
||
|
|
|
||
|
|
hmSysModSerialNum OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The serial number provided by vendor (ASCII). "
|
||
|
|
::= { hmSysModuleEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
hmInterfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmInterfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each interface of
|
||
|
|
the switch."
|
||
|
|
::= { hmSystemTable 11 }
|
||
|
|
|
||
|
|
hmInterfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmInterfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmInterfaceTable."
|
||
|
|
INDEX { hmIfaceGroupID, hmIfaceID }
|
||
|
|
::= { hmInterfaceTable 1 }
|
||
|
|
|
||
|
|
HmInterfaceEntry ::= SEQUENCE {
|
||
|
|
hmIfaceGroupID Integer32,
|
||
|
|
hmIfaceID Integer32,
|
||
|
|
hmIfaceStpEnable INTEGER,
|
||
|
|
hmIfaceLinkType INTEGER,
|
||
|
|
hmIfaceAction INTEGER,
|
||
|
|
hmIfaceNextHopMacAddress MacAddress,
|
||
|
|
hmIfaceFlowControl INTEGER,
|
||
|
|
hmIfacePriorityThreshold Integer32,
|
||
|
|
hmIfaceName DisplayString,
|
||
|
|
hmIfaceTrunkID Integer32,
|
||
|
|
hmIfacePrioTOSEnable INTEGER,
|
||
|
|
hmIfaceBcastLimit Integer32,
|
||
|
|
hmIfaceUtilization Integer32,
|
||
|
|
hmIfaceUtilizationControlInterval Integer32,
|
||
|
|
hmIfaceStpBpduGuardEnable INTEGER,
|
||
|
|
hmIfaceStpBpduGuardStatus INTEGER,
|
||
|
|
hmIfaceCapability Integer32,
|
||
|
|
hmIfaceIngressLimiterMode INTEGER,
|
||
|
|
hmIfaceIngressLimiterCalculationMode INTEGER,
|
||
|
|
hmIfaceIngressLimiterRate Integer32,
|
||
|
|
hmIfaceEgressLimiterMode INTEGER,
|
||
|
|
hmIfaceEgressLimiterCalculationMode INTEGER,
|
||
|
|
hmIfaceEgressLimiterRate Integer32,
|
||
|
|
hmIfaceUtilizationAlarmUpperThreshold Integer32,
|
||
|
|
hmIfaceUtilizationAlarmLowerThreshold Integer32,
|
||
|
|
hmIfaceUtilizationAlarmCondition TruthValue,
|
||
|
|
hmIfaceCableCrossing INTEGER,
|
||
|
|
hmIfacePhyFastLinkDetection INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmIfaceGroupID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..5)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface card. This value is never
|
||
|
|
greater than hmSysGroupCapacity."
|
||
|
|
::= { hmInterfaceEntry 1 }
|
||
|
|
|
||
|
|
hmIfaceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface within an interface card."
|
||
|
|
::= { hmInterfaceEntry 2 }
|
||
|
|
|
||
|
|
hmIfaceStpEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable spanning tree protocol."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmInterfaceEntry 3 }
|
||
|
|
|
||
|
|
hmIfaceLinkType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
user (1),
|
||
|
|
uplink (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Describes the link type of the interface."
|
||
|
|
DEFVAL { user }
|
||
|
|
::= { hmInterfaceEntry 4 }
|
||
|
|
|
||
|
|
hmIfaceAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noAction (1),
|
||
|
|
resetStats (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object, when read, always returns a value of noAction(1).
|
||
|
|
When set to resetStats(2), a reset of all statistic counters
|
||
|
|
within this interfacecard will be forced."
|
||
|
|
DEFVAL { noAction }
|
||
|
|
::= { hmInterfaceEntry 5 }
|
||
|
|
|
||
|
|
hmIfaceNextHopMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The macaddress of the next switch agent reachable via this
|
||
|
|
interface. If the value is 0:0:0:0:0:0, no other switch is
|
||
|
|
seen via this interface."
|
||
|
|
::= { hmInterfaceEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmIfaceFlowControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables or disables flow control per port"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmInterfaceEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
hmIfacePriorityThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to support the dot1dTrafficClassTable.
|
||
|
|
It defines the thresholds of the available priority-classes.
|
||
|
|
Starting at MACH Release 2.20 this variable is not used any more."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { hmInterfaceEntry 8 }
|
||
|
|
|
||
|
|
hmIfaceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..20))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"User configurable textual description of the interface. On devices
|
||
|
|
which support Power over Ethernet (IEEE 802.af), this object is
|
||
|
|
mapped to pethPsePortType of the RFC3621 MIB."
|
||
|
|
::= { hmInterfaceEntry 9 }
|
||
|
|
|
||
|
|
hmIfaceTrunkID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If the value of this variable is greater 0 then it belongs
|
||
|
|
to the link aggregation instance with the same index. If
|
||
|
|
the value is 0 no link aggregation uses this interface."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 10 }
|
||
|
|
|
||
|
|
hmIfacePrioTOSEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable Priority setting from IP TOS field."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmInterfaceEntry 11 }
|
||
|
|
|
||
|
|
hmIfaceBcastLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Broadcast rate: maximum number of broadcasts to be sent
|
||
|
|
on this port within one second, use 0 for no limitation."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 12 }
|
||
|
|
|
||
|
|
hmIfaceUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..10000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The best estimate of the mean physical layer
|
||
|
|
network utilization on this interface during the
|
||
|
|
last sampling interval, in hundredths of a percent.
|
||
|
|
The first historyControlInterval (rfc1757) of this
|
||
|
|
interface is used as sampling interval."
|
||
|
|
::= { hmInterfaceEntry 13 }
|
||
|
|
|
||
|
|
hmIfaceUtilizationControlInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The interval in seconds over which the data is
|
||
|
|
sampled for hmIfaceUtilization.
|
||
|
|
This interval can be any number of seconds
|
||
|
|
between 1 and 3600 (1 hour).
|
||
|
|
The first historyControlInterval (rfc1757) of this
|
||
|
|
interface is used as sampling interval."
|
||
|
|
::= { hmInterfaceEntry 14 }
|
||
|
|
|
||
|
|
hmIfaceStpBpduGuardEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enabled or disabled the BPDU guard functionality per port.
|
||
|
|
If BPDU guard functionality are global enabled (hmSysStpBPDUGuardEnable=enable(1)),
|
||
|
|
and BPDU guard are enabled per port (hmIfaceStpBpduGuardEnable=enable(1)) and (R)STP are globally enabled
|
||
|
|
and an BPDU are received on the port, then hmIfaceStpBpduGuardStatus is set to true(1) for this port and
|
||
|
|
IfAdminStatus for this port is set to down(2).
|
||
|
|
Variable hmIfaceStpBpduGuardStatus can be reset to their original value (=false) with switching BPDU guard
|
||
|
|
functionality globally off.
|
||
|
|
IfAdminStatus can be reset to to their original values up() only manually."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmInterfaceEntry 15 }
|
||
|
|
|
||
|
|
hmIfaceStpBpduGuardStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Advertised the state of BPDU guard functionality for this port.
|
||
|
|
If BPDU guard functionality fot this port is disabled or guard
|
||
|
|
functionality is enabled, but no BPDUs are received on this port,
|
||
|
|
then hmIfaceStpBpduGuardStatus is set to false(2) for this port.
|
||
|
|
If BPDU is received on an port with enabled BPDU guard functionality for this port
|
||
|
|
(hmIfaceStpBpduGuardEnable=enable(1)) and globally (hmSysStpBPDUGuardEnable=enable(1))
|
||
|
|
then hmIfaceStpBpduGuardStatus is set to true(1) and additionally IfAdminStatus for
|
||
|
|
this port is set to down(2).
|
||
|
|
Variable hmIfaceStpBpduGuardStatus can be reset (to their original values (=false))
|
||
|
|
with switching BPDU guard functionality globally off.
|
||
|
|
IfAdminStatus can be again reset to to their original values up() only manually."
|
||
|
|
::= { hmInterfaceEntry 16 }
|
||
|
|
|
||
|
|
hmIfaceCapability OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Capability of the interface coded as an integer value
|
||
|
|
with each bit representing a special capability.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: cabletest capability
|
||
|
|
Bit 1: realtime capability according to IEEE 1588.
|
||
|
|
"
|
||
|
|
::= { hmInterfaceEntry 17 }
|
||
|
|
|
||
|
|
hmIfaceIngressLimiterMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
all (1),
|
||
|
|
bc (2),
|
||
|
|
bc-mc (3),
|
||
|
|
bc-mc-uuc (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ingress limiter can work in different modes.
|
||
|
|
Mode all limits the complete ingress traffic.
|
||
|
|
Mode bc limits only the ingress broadcast traffic.
|
||
|
|
Mode bc_mc limits the ingress broadcast and multicast traffic.
|
||
|
|
Mode bc_mc_uuc limits the ingress broadcast, multicast and
|
||
|
|
unknown unicast traffic.
|
||
|
|
The limiter is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { bc }
|
||
|
|
::= { hmInterfaceEntry 18 }
|
||
|
|
|
||
|
|
hmIfaceIngressLimiterCalculationMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
bytebased (1),
|
||
|
|
packetbased (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ingress limiter can measure the traffic
|
||
|
|
on a bytes per second
|
||
|
|
or on a packets per second basis.
|
||
|
|
The limiter calculation mode is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { bytebased }
|
||
|
|
::= { hmInterfaceEntry 19 }
|
||
|
|
|
||
|
|
hmIfaceIngressLimiterRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The rate of the ingress limiter.
|
||
|
|
The value 0 disables the limiter.
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 20 }
|
||
|
|
|
||
|
|
hmIfaceEgressLimiterMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
all (1),
|
||
|
|
bc (2),
|
||
|
|
bc-mc (3),
|
||
|
|
bc-mc-uuc (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The egress limiter can work in different modes.
|
||
|
|
Mode all limits the complete egress traffic.
|
||
|
|
Mode bc limits only the egress broadcast traffic.
|
||
|
|
Mode bc_mc limits the egress broadcast and multicast traffic.
|
||
|
|
Mode bc_mc_uuc limits the egress broadcast, multicast and
|
||
|
|
unknown unicast traffic.
|
||
|
|
The limiter is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { all }
|
||
|
|
::= { hmInterfaceEntry 21 }
|
||
|
|
|
||
|
|
hmIfaceEgressLimiterCalculationMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
bytebased (1),
|
||
|
|
packetbased (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The egress limiter can measure the traffic
|
||
|
|
on a bytes per second
|
||
|
|
or on a packets per second basis.
|
||
|
|
The limiter calculation mode is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { bytebased }
|
||
|
|
::= { hmInterfaceEntry 22 }
|
||
|
|
|
||
|
|
hmIfaceEgressLimiterRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The rate of the egress limiter.
|
||
|
|
The value 0 disables the limiter.
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 23 }
|
||
|
|
|
||
|
|
hmIfaceUtilizationAlarmUpperThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..10000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Surveys the interface utilization hmIfaceUtilization and
|
||
|
|
generates an alarm for this interfaces, if the given
|
||
|
|
limit is exceeded.
|
||
|
|
A value of 0 disables the alarm generation."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 24 }
|
||
|
|
|
||
|
|
hmIfaceUtilizationAlarmLowerThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..10000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Surveys the interface utilization hmInfaceUtilization and
|
||
|
|
removes the alarm condition for this interfaces, if
|
||
|
|
the utilization value is below the given limit.
|
||
|
|
A value of 0 disables the alarm removal."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmInterfaceEntry 25 }
|
||
|
|
|
||
|
|
hmIfaceUtilizationAlarmCondition OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm condition is given (true), if the given
|
||
|
|
hmIfaceUtilizationAlarmUpperThreshold limit is exceeded
|
||
|
|
by the interface utilization. The alarm condition
|
||
|
|
will be removed, when the interface utilization falls
|
||
|
|
below the hmIfaceUtilizationAlarmLowerThreshold."
|
||
|
|
::= { hmInterfaceEntry 26 }
|
||
|
|
|
||
|
|
hmIfaceCableCrossing OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
unsupported(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable configures the cable crossing
|
||
|
|
on twisted pair cables.
|
||
|
|
When set to 'enable', the port uses
|
||
|
|
the crossover mode.
|
||
|
|
When set to 'disable', the port does not use
|
||
|
|
the crossover mode.
|
||
|
|
'Unsupported' is shown, if a port does not
|
||
|
|
support cable crossing.
|
||
|
|
It is not possible to set 'unsupported' to
|
||
|
|
any type of port."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmInterfaceEntry 27 }
|
||
|
|
|
||
|
|
hmIfacePhyFastLinkDetection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
unsupported(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable configures the PHY specific
|
||
|
|
fast link detection feature on this port.
|
||
|
|
'Unsupported' is shown, if a port does not
|
||
|
|
support this feature.
|
||
|
|
It is not possible to set 'unsupported' to
|
||
|
|
any type of port."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmInterfaceEntry 28 }
|
||
|
|
|
||
|
|
hmTrunkTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmTrunkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each trunk of
|
||
|
|
the switch."
|
||
|
|
::= { hmSystemTable 12 }
|
||
|
|
|
||
|
|
hmTrunkEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmTrunkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmTrunkTable."
|
||
|
|
INDEX { hmTrunkID }
|
||
|
|
::= { hmTrunkTable 1 }
|
||
|
|
|
||
|
|
HmTrunkEntry ::= SEQUENCE {
|
||
|
|
hmTrunkID Integer32,
|
||
|
|
hmTrunkInterfaces OCTET STRING,
|
||
|
|
hmTrunkName DisplayString,
|
||
|
|
hmTrunkAction INTEGER,
|
||
|
|
hmTrunkAdminStatus INTEGER,
|
||
|
|
hmTrunkOperStatus INTEGER,
|
||
|
|
hmTrunkLastChange TimeTicks
|
||
|
|
}
|
||
|
|
|
||
|
|
hmTrunkID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index to identify a link aggregation instance"
|
||
|
|
::= { hmTrunkEntry 1 }
|
||
|
|
|
||
|
|
hmTrunkInterfaces OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"List of interfaces which are aggregated in the trunk.
|
||
|
|
each octet pair contains the slotID and interfaceID.
|
||
|
|
Interfaces are added or deleteted using the variable
|
||
|
|
hmIfaceTrunkID."
|
||
|
|
::= { hmTrunkEntry 2 }
|
||
|
|
|
||
|
|
hmTrunkName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Textual description of the trunk"
|
||
|
|
::= { hmTrunkEntry 3 }
|
||
|
|
|
||
|
|
hmTrunkAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noAction (1),
|
||
|
|
resetStats (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"action according to hmIfaceAction which is performed
|
||
|
|
for all interfaces in the trunk"
|
||
|
|
DEFVAL { noAction }
|
||
|
|
::= { hmTrunkEntry 4 }
|
||
|
|
|
||
|
|
hmTrunkAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1), -- ready to pass packets
|
||
|
|
down(2) -- disabled
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The desired state of the trunk. if this variable
|
||
|
|
is set to down(2), all interfaces which are aggregated
|
||
|
|
in the trunk are switched off simultaneously. Reading
|
||
|
|
this variable returns up(1) if at least one interface
|
||
|
|
of the trunk is operational (up)."
|
||
|
|
::= { hmTrunkEntry 5 }
|
||
|
|
|
||
|
|
hmTrunkOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1), -- ready to pass packets
|
||
|
|
down(2) -- disabled
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational state of the trunk. Reading this
|
||
|
|
variable returns up(1) if at least one interface
|
||
|
|
of the trunk is operational (up)."
|
||
|
|
::= { hmTrunkEntry 6 }
|
||
|
|
|
||
|
|
hmTrunkLastChange OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Time since system boot when there was a change in either
|
||
|
|
the operational state of the trunk or the list of aggregated
|
||
|
|
interfaces."
|
||
|
|
::= { hmTrunkEntry 7 }
|
||
|
|
|
||
|
|
-- { hmSystemTable 12 }
|
||
|
|
|
||
|
|
hmSFPTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSFPEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each SFP."
|
||
|
|
::= { hmSystemTable 13 }
|
||
|
|
|
||
|
|
hmSFPEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSFPEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Entry for a detected SFP."
|
||
|
|
INDEX { hmSfpGroupID, hmSfpID }
|
||
|
|
::= { hmSFPTable 1 }
|
||
|
|
|
||
|
|
HmSFPEntry ::= SEQUENCE {
|
||
|
|
hmSfpGroupID Integer32,
|
||
|
|
hmSfpID Integer32,
|
||
|
|
hmSfpConnector INTEGER,
|
||
|
|
hmSfpTransceiver INTEGER,
|
||
|
|
hmSfpVendorOUI OCTET STRING,
|
||
|
|
hmSfpVendorName DisplayString,
|
||
|
|
hmSfpPartNumber DisplayString,
|
||
|
|
hmSfpPartRev DisplayString,
|
||
|
|
hmSfpSerialNum DisplayString,
|
||
|
|
hmSfpDateCode DisplayString,
|
||
|
|
hmSfpBitRate Integer32,
|
||
|
|
hmSfpTemperature Integer32,
|
||
|
|
hmSfpTxPower DisplayString,
|
||
|
|
hmSfpRxPower DisplayString,
|
||
|
|
hmSfpTxPowerInt Integer32,
|
||
|
|
hmSfpRxPowerInt Integer32,
|
||
|
|
hmSfpRxPowerState INTEGER,
|
||
|
|
hmSfpInfoVersion Integer32,
|
||
|
|
hmSfpInfoPartNumber DisplayString,
|
||
|
|
hmSfpInfoPartId DisplayString,
|
||
|
|
hmSfpInfoMagic Integer32,
|
||
|
|
hmSfpSupported TruthValue,
|
||
|
|
hmSfpMaxLength-fiber-9 Integer32,
|
||
|
|
hmSfpMaxLength-fiber-50 Integer32,
|
||
|
|
hmSfpMaxLength-fiber-62-5 Integer32,
|
||
|
|
hmSfpMaxLength-copper Integer32,
|
||
|
|
hmSfpTxPowerdBm DisplayString,
|
||
|
|
hmSfpRxPowerdBm DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSfpGroupID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index to identify a module.
|
||
|
|
This value is never greater than hmSysGroupModuleCapacity."
|
||
|
|
::= { hmSFPEntry 1 }
|
||
|
|
|
||
|
|
hmSfpID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index to identify an interface within a module.
|
||
|
|
This value is never greater than hmSysModulePortCapacity."
|
||
|
|
::= { hmSFPEntry 2 }
|
||
|
|
|
||
|
|
hmSfpConnector OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
non-sfp (1),
|
||
|
|
fiberjack (6),
|
||
|
|
lc (7),
|
||
|
|
mt-rj (8),
|
||
|
|
optical-pigtail (11),
|
||
|
|
copper-pigtail (33)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's Connector Type."
|
||
|
|
::= { hmSFPEntry 3 }
|
||
|
|
|
||
|
|
hmSfpTransceiver OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ge-1000-base-sx (1),
|
||
|
|
ge-1000-base-lx (2),
|
||
|
|
ge-1000-base-cx (4),
|
||
|
|
ge-1000-base-t (8),
|
||
|
|
unsupported (9),
|
||
|
|
oc3-mm-sr (10),
|
||
|
|
oc3-sm-ir (11),
|
||
|
|
oc3-sm-lr (12),
|
||
|
|
oc12-mm-sr (13),
|
||
|
|
oc12-sm-ir (14),
|
||
|
|
oc12-sm-lr (15),
|
||
|
|
oc48-sr (16),
|
||
|
|
oc48-ir (17),
|
||
|
|
oc48-lr (18),
|
||
|
|
xfp-10gbase-sr(30),
|
||
|
|
xfp-10gbase-lr(31),
|
||
|
|
xfp-10gbase-er(32),
|
||
|
|
microfx(40),
|
||
|
|
pof(41)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's Transceiver type."
|
||
|
|
::= { hmSFPEntry 4 }
|
||
|
|
|
||
|
|
hmSfpVendorOUI OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's vendor IEEE company ID (OUI). "
|
||
|
|
::= { hmSFPEntry 5 }
|
||
|
|
|
||
|
|
hmSfpVendorName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's vendor name (ASCII). "
|
||
|
|
::= { hmSFPEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSfpPartNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's part description number (ASCII). "
|
||
|
|
::= { hmSFPEntry 7 }
|
||
|
|
|
||
|
|
hmSfpPartRev OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's part revision number (ASCII)."
|
||
|
|
::= { hmSFPEntry 8 }
|
||
|
|
|
||
|
|
hmSfpSerialNum OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's serial number provided by vendor (ASCII). "
|
||
|
|
::= { hmSFPEntry 9 }
|
||
|
|
|
||
|
|
hmSfpDateCode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's vendor manufacturing date code. Format is YY:MM:DD."
|
||
|
|
::= { hmSFPEntry 10 }
|
||
|
|
|
||
|
|
hmSfpBitRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's nominal bitrate in units of MBits/sec.
|
||
|
|
Contains -1 in case of a device read error."
|
||
|
|
::= { hmSFPEntry 11 }
|
||
|
|
|
||
|
|
hmSfpTemperature OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This signed integer is used to identify
|
||
|
|
the temperature within the SFP in units of centigrade (celsius).
|
||
|
|
Contains -1000 in case of a device read error."
|
||
|
|
::= { hmSFPEntry 12 }
|
||
|
|
|
||
|
|
hmSfpTxPower OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Tx Power in units of milliWatts.
|
||
|
|
(ASCII representation of floating point number)."
|
||
|
|
::= { hmSFPEntry 13 }
|
||
|
|
|
||
|
|
hmSfpRxPower OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Rx Power in units of milliWatts.
|
||
|
|
(ASCII representation of floating point number)."
|
||
|
|
::= { hmSFPEntry 14 }
|
||
|
|
|
||
|
|
hmSfpTxPowerInt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Tx Power in units of 1/10 microWatts."
|
||
|
|
::= { hmSFPEntry 15 }
|
||
|
|
|
||
|
|
hmSfpRxPowerInt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Rx Power in units of 1/10 microWatts."
|
||
|
|
::= { hmSFPEntry 16 }
|
||
|
|
|
||
|
|
hmSfpRxPowerState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok(1),
|
||
|
|
warning(2),
|
||
|
|
alarm(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of the SFP's internally measured Rx."
|
||
|
|
::= { hmSFPEntry 17 }
|
||
|
|
|
||
|
|
hmSfpInfoVersion OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Version of SFP's Hirschmann Information.
|
||
|
|
Contains -1 in case of a device read error."
|
||
|
|
::= { hmSFPEntry 20 }
|
||
|
|
|
||
|
|
hmSfpInfoPartNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..11))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Part Number of SFP's Hirschmann Information."
|
||
|
|
::= { hmSFPEntry 21 }
|
||
|
|
|
||
|
|
hmSfpInfoPartId OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Part Identifier of SFP's Hirschmann Information."
|
||
|
|
::= { hmSFPEntry 22 }
|
||
|
|
|
||
|
|
hmSfpInfoMagic OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"1, if SFP contains vendor specific information by Hirschmann, otherwise 0."
|
||
|
|
::= { hmSFPEntry 23 }
|
||
|
|
|
||
|
|
hmSfpSupported OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates if the local agent supports this SFP."
|
||
|
|
::= { hmSFPEntry 24 }
|
||
|
|
|
||
|
|
hmSfpMaxLength-fiber-9 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max. usable length for the cable type '9/125 micrometer fiber'
|
||
|
|
with this SFP in units of meters. "
|
||
|
|
::= { hmSFPEntry 30 }
|
||
|
|
|
||
|
|
hmSfpMaxLength-fiber-50 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max. usable length for the cable type '50/125 micrometer fiber'
|
||
|
|
with this SFP in units of meters. "
|
||
|
|
::= { hmSFPEntry 31 }
|
||
|
|
|
||
|
|
hmSfpMaxLength-fiber-62-5 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max. usable length for the cable type '62.5/125 micrometer fiber'
|
||
|
|
with this SFP in units of meters. "
|
||
|
|
::= { hmSFPEntry 32 }
|
||
|
|
|
||
|
|
hmSfpMaxLength-copper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max. usable length for the cable type 'copper'
|
||
|
|
with this SFP in units of meters. "
|
||
|
|
::= { hmSFPEntry 33 }
|
||
|
|
|
||
|
|
hmSfpTxPowerdBm OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Tx Power in units of dBm.
|
||
|
|
(ASCII representation of floating point number)."
|
||
|
|
::= { hmSFPEntry 34 }
|
||
|
|
|
||
|
|
hmSfpRxPowerdBm OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SFP's internally measured Rx Power in units of dBm.
|
||
|
|
(ASCII representation of floating point number)."
|
||
|
|
::= { hmSFPEntry 35 }
|
||
|
|
|
||
|
|
-- { hmSystemTable 13 }
|
||
|
|
|
||
|
|
hmSysChassisName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This displaystring represents the name of the Chassis.
|
||
|
|
Any change of this variable will cause an automatically
|
||
|
|
update of this value on each Basic Board in this Chassis."
|
||
|
|
::= { hmSystemTable 20 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSysStpEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable controls the STP operation of the entire
|
||
|
|
switch. To control the STP function of each port use
|
||
|
|
hmIfaceStpEnable"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmSystemTable 21 }
|
||
|
|
|
||
|
|
hmSysFlowControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"enables or disables flow control for the switch unit."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 22 }
|
||
|
|
|
||
|
|
hmSysBOOTPEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/Disable BOOTP operation. A (1) enables, a (2) disables.
|
||
|
|
When disabled, no BOOTPs are transmitted by the system.
|
||
|
|
When enabled, the system sends BOOTP requests at booting."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 23 }
|
||
|
|
|
||
|
|
hmSysDHCPEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/Disable DHCP operation. A (1) enables, a (2) disables.
|
||
|
|
When disabled, no DHCPs are transmitted by the system.
|
||
|
|
When enabled, the system sends DHCP requests at booting."
|
||
|
|
::= { hmSystemTable 24 }
|
||
|
|
|
||
|
|
hmSysTelnetEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/Disable Telnet operation. A (1) enables, a (2) disables.
|
||
|
|
When disabled, no Telnet sessions are allowed by the system."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmSystemTable 25 }
|
||
|
|
|
||
|
|
hmSysHTTPEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/Disable HTTP connection. A (1) enables, a (2) disables.
|
||
|
|
When disabled, no HTTP is allowed by the system."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmSystemTable 26 }
|
||
|
|
|
||
|
|
hmSysPlugAndPlay OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/Disable Plug&Play feature. A (1) enables, a (2) disables.
|
||
|
|
if this variable is set to enable(1), special Plug&Play actions are
|
||
|
|
performed at boot time and after a successful completion the value
|
||
|
|
is automatically reset to the disable(2) state."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 27 }
|
||
|
|
|
||
|
|
|
||
|
|
hmBcastLimiterMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Global configuration of feature broadcast limiter.
|
||
|
|
If enabled, for each port the maximum rate of broadcasts
|
||
|
|
can be specified."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 29 }
|
||
|
|
|
||
|
|
hmSystemTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Time measured in seconds since 00:00:00 UTC, January 1, 1970.
|
||
|
|
The clock of the agents may be set using this variable.
|
||
|
|
Changing this variable on one agent automatically updates
|
||
|
|
the value on the other agents in the same chassis."
|
||
|
|
::= { hmSystemTable 30 }
|
||
|
|
|
||
|
|
hmSystemTimeSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
local (1),
|
||
|
|
sntp (2),
|
||
|
|
ptp (3),
|
||
|
|
gps (4),
|
||
|
|
ntp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the source of the system time."
|
||
|
|
::= { hmSystemTable 31 }
|
||
|
|
|
||
|
|
hmSysStpBPDUGuardEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable controls the BPDU Guard operation of the entire
|
||
|
|
switch (globally). To control the BPDU Guard function of each port use
|
||
|
|
hmIfaceStpBpduGuardEnable.
|
||
|
|
If BPDU guard functionality are global enabled (hmSysStpBPDUGuardEnable=enable(1)),
|
||
|
|
and BPDU guard are enabled per port (hmIfaceStpBpduGuardEnable=enable(1)) and (R)STP are globally enabled
|
||
|
|
and an BPDU are received on the port, then hmIfaceStpBpduGuardStatus is set to true(1) for this port and
|
||
|
|
IfAdminStatus is set to down(2) for this port.
|
||
|
|
Variable hmIfaceStpBpduGuardStatus can be reset (to their original values (=false)) with switching
|
||
|
|
BPDU guard functionality globally off (hmSysStpBPDUGuardEnable=disable(2)).
|
||
|
|
IfAdminStatus can be again reset to to their original values up() only manually.
|
||
|
|
The default value of hmSysStpBPDUGuardEnable is disable(2)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 32 }
|
||
|
|
|
||
|
|
hmSysSTPErrorNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Advertised the reason why (R)STP could not be switched on.
|
||
|
|
Error reasons are coded as OR operation bit by bit, see values:
|
||
|
|
0x00 - no errors - (R)STP is switched on,
|
||
|
|
0x01 - (R)STP cannot be switched on, because of standby mode,
|
||
|
|
0x02 - (R)STP cannot be switched on, because of kopp Local Active,
|
||
|
|
0x04 - (R)STP cannot be switched on, because of kopp Slave Active,
|
||
|
|
0x08 - (R)STP cannot be switched on, because of kopp Master Active,
|
||
|
|
0x10 - (R)STP cannot be switched on, because of sysRingOn and sysRMMode,
|
||
|
|
0x20 - (R)STP cannot be switched on, because of error if BB_SetParameter is occured.
|
||
|
|
"
|
||
|
|
::= { hmSystemTable 33 }
|
||
|
|
|
||
|
|
hmSysSoftwareCapability OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable shows the capability of the running software.
|
||
|
|
The string is formated as follow:
|
||
|
|
Byte 1 : Always L (for Layer)
|
||
|
|
Byte 2 : 2 or 3 (dependend if the software supports onyl switching (2)
|
||
|
|
or also routing (3))
|
||
|
|
Byte 3 : E or P (Enhanced or Professional software functionality)
|
||
|
|
"
|
||
|
|
::= { hmSystemTable 34 }
|
||
|
|
|
||
|
|
hmLEDGroup OBJECT IDENTIFIER ::= { hmSystemTable 35 }
|
||
|
|
|
||
|
|
hmLEDRSGroup OBJECT IDENTIFIER ::= { hmLEDGroup 1 }
|
||
|
|
|
||
|
|
hmLEDRSPowerSupply OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the PowerSupply LED."
|
||
|
|
::= { hmLEDRSGroup 1 }
|
||
|
|
|
||
|
|
hmLEDRStandby OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Standby LED."
|
||
|
|
::= { hmLEDRSGroup 2 }
|
||
|
|
|
||
|
|
hmLEDRSRedundancyManager OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the RM LED."
|
||
|
|
::= { hmLEDRSGroup 3 }
|
||
|
|
|
||
|
|
hmLEDRSFault OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Fault LED."
|
||
|
|
::= { hmLEDRSGroup 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmLEDOctGroup OBJECT IDENTIFIER ::= { hmLEDGroup 2 }
|
||
|
|
|
||
|
|
hmLEDOctPowerSupply1 OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the PowerSupply 1 LED."
|
||
|
|
::= { hmLEDOctGroup 1 }
|
||
|
|
|
||
|
|
hmLEDOctPowerSupply2 OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the PowerSupply 2 LED."
|
||
|
|
::= { hmLEDOctGroup 2 }
|
||
|
|
|
||
|
|
hmLEDOctRedundancyManager OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the RM LED."
|
||
|
|
::= { hmLEDOctGroup 3 }
|
||
|
|
|
||
|
|
hmLEDOctFault OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Fault LED."
|
||
|
|
::= { hmLEDOctGroup 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmLEDRSRGroup OBJECT IDENTIFIER ::= { hmLEDGroup 3 }
|
||
|
|
|
||
|
|
hmLEDRSRPowerSupply OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the PowerSupply LED."
|
||
|
|
::= { hmLEDRSRGroup 1 }
|
||
|
|
|
||
|
|
hmLEDRSRStandby OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Standby LED."
|
||
|
|
::= { hmLEDRSRGroup 2 }
|
||
|
|
|
||
|
|
hmLEDRSRRedundancyManager OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the RM LED."
|
||
|
|
::= { hmLEDRSRGroup 3 }
|
||
|
|
|
||
|
|
hmLEDRSRFault OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Fault LED."
|
||
|
|
::= { hmLEDRSRGroup 4 }
|
||
|
|
|
||
|
|
hmLEDRSRRelay1 OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Relay1 LED."
|
||
|
|
::= { hmLEDRSRGroup 5 }
|
||
|
|
|
||
|
|
hmLEDRSRRelay2 OBJECT-TYPE
|
||
|
|
SYNTAX LEDState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from the Relay2 LED."
|
||
|
|
::= { hmLEDRSRGroup 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmDIPSwitchGroup OBJECT IDENTIFIER ::= { hmSystemTable 36 }
|
||
|
|
|
||
|
|
hmDIPSwitchRSGroup OBJECT IDENTIFIER ::= { hmDIPSwitchGroup 1 }
|
||
|
|
|
||
|
|
hmDIPSwitchRSRedundancyManager OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from redundancy manager DIP switch."
|
||
|
|
::= { hmDIPSwitchRSGroup 1 }
|
||
|
|
|
||
|
|
hmDIPSwitchRSStandby OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from Standby DIP switch."
|
||
|
|
::= { hmDIPSwitchRSGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmDIPSwitchMICEGroup OBJECT IDENTIFIER ::= { hmDIPSwitchGroup 2 }
|
||
|
|
|
||
|
|
hmDIPSwitchMICERedundancyManager OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from redundancy manager DIP switch."
|
||
|
|
::= { hmDIPSwitchMICEGroup 1 }
|
||
|
|
|
||
|
|
hmDIPSwitchMICERingPort OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from ring ports DIP switch.
|
||
|
|
on (1) indicates port 1 on module 1 and port 1 on module 2 are used as ring ports.
|
||
|
|
off (2) indicates port 1 and 2 on module 1 are used as ring ports."
|
||
|
|
::= { hmDIPSwitchMICEGroup 2 }
|
||
|
|
|
||
|
|
hmDIPSwitchMICEStandby OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from Standby DIP switch."
|
||
|
|
::= { hmDIPSwitchMICEGroup 3 }
|
||
|
|
|
||
|
|
hmDIPSwitchMICEConfig OBJECT-TYPE
|
||
|
|
SYNTAX DIPSwitchState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status from DIP switch configuration.
|
||
|
|
on (1) indicates DIP switch configuration is enabled.
|
||
|
|
off (2) indicates DIP switch configuration is disabled."
|
||
|
|
::= { hmDIPSwitchMICEGroup 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSysMaxTrunks OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of trunks for this chassis."
|
||
|
|
::= { hmSystemTable 37 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / Limiter Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmLimiterGroup OBJECT IDENTIFIER ::= { hmSystemTable 38 }
|
||
|
|
hmIngressLimiterGroup OBJECT IDENTIFIER ::= { hmLimiterGroup 1 }
|
||
|
|
|
||
|
|
hmIngressLimiterEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The global ingress limiter can be enabled or disabled.
|
||
|
|
"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmIngressLimiterGroup 1 }
|
||
|
|
|
||
|
|
hmIngressLimiterMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
all (1),
|
||
|
|
bc (2),
|
||
|
|
bc-mc (3),
|
||
|
|
bc-mc-uuc (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The global ingress limiter can work in different modes.
|
||
|
|
Mode all limits the complete ingress traffic.
|
||
|
|
Mode bc limits only the ingress broadcast traffic.
|
||
|
|
Mode bc_mc limits the ingress broadcast and multicast traffic.
|
||
|
|
Mode bc_mc_uuc limits the ingress broadcast, multicast and
|
||
|
|
unknown unicast traffic.
|
||
|
|
The limiter is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { bc }
|
||
|
|
::= { hmIngressLimiterGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmIngressUnknUcLimiterGroup OBJECT IDENTIFIER ::= { hmIngressLimiterGroup 3 }
|
||
|
|
|
||
|
|
hmIngressUnknUcLimiterMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The global unknown unicast ingress limiter can be enabled or disabled.
|
||
|
|
The limiter is hardware dependend.
|
||
|
|
"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmIngressUnknUcLimiterGroup 1 }
|
||
|
|
|
||
|
|
hmIngressUnknUcLimiterCalculationMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
bytebased (1),
|
||
|
|
packetbased (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The global unknown unicast ingress limiter
|
||
|
|
can measure the traffic on a bytes per second
|
||
|
|
or on a packets per second basis.
|
||
|
|
The limiter calculation mode is hardware dependend.
|
||
|
|
Not all modes are available on every hardware.
|
||
|
|
"
|
||
|
|
DEFVAL { bytebased }
|
||
|
|
::= { hmIngressUnknUcLimiterGroup 2 }
|
||
|
|
|
||
|
|
hmIngressUnknUcLimiterRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The rate of the global unknown unicast ingress limiter.
|
||
|
|
The value 0 disables the limiter.
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmIngressUnknUcLimiterGroup 3 }
|
||
|
|
|
||
|
|
|
||
|
|
hmEgressLimiterGroup OBJECT IDENTIFIER ::= { hmLimiterGroup 2 }
|
||
|
|
|
||
|
|
hmEgressLimiterEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The global egress limiter can be enabled or disabled.
|
||
|
|
"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmEgressLimiterGroup 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / USB Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSysUSBGroup OBJECT IDENTIFIER ::= { hmSystemTable 39 }
|
||
|
|
|
||
|
|
hmSysMaxUSBPorts OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of USB ports in this chassis."
|
||
|
|
::= { hmSysUSBGroup 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / Switch Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSysSwitchGroup OBJECT IDENTIFIER ::= { hmSystemTable 40 }
|
||
|
|
|
||
|
|
hmSysSwitchLearning OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls address learning by the switch.
|
||
|
|
When disabled the address database of the switch will
|
||
|
|
not be updated with dynamic filtering entries.
|
||
|
|
Static Filtering Entries and Group Registration Entries
|
||
|
|
are not affected."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSwitchGroup 1 }
|
||
|
|
|
||
|
|
hmSysSwitchMRU OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
size1522 (1522),
|
||
|
|
size1552 (1552),
|
||
|
|
size1632 (1632)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Maximum Receive Unit MRU that
|
||
|
|
can be received by the switch."
|
||
|
|
DEFVAL { size1522 }
|
||
|
|
::= { hmSysSwitchGroup 2 }
|
||
|
|
|
||
|
|
hmSysSwitchFastLinkDetection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls if the fast link detection is enabled or not."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSwitchGroup 3 }
|
||
|
|
|
||
|
|
hmSysSwitchAddressRelearnDetection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls if detection of address relearns
|
||
|
|
is enabled or not."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { hmSysSwitchGroup 4 }
|
||
|
|
|
||
|
|
hmSysSwitchAddressRelearnThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..1024)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of relearnd addresses to signal address
|
||
|
|
relearn threshold exceeded."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { hmSysSwitchGroup 5 }
|
||
|
|
|
||
|
|
hmSysSwitchDuplexMismatchDetection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls if duplex mismatch detection
|
||
|
|
is enabled or not."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSwitchGroup 6 }
|
||
|
|
|
||
|
|
hmSysSwitchFDBFullCounter OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of FDB Full indications that the agent has detected since reboot."
|
||
|
|
::= { hmSysSwitchGroup 7 }
|
||
|
|
|
||
|
|
hmSysSwitchFDBHashOptimizingMode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Mode to optimize the MAC address table hashing algorithm.
|
||
|
|
Which modes can be configured is hardware dependend.
|
||
|
|
After configuration a reboot is needed."
|
||
|
|
::= { hmSysSwitchGroup 8 }
|
||
|
|
|
||
|
|
hmSysSwitchFDBHashOptimizingStatus OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the current hash mode of this device."
|
||
|
|
::= { hmSysSwitchGroup 9 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSysSwitchVLANGroup OBJECT IDENTIFIER ::= { hmSysSwitchGroup 10 }
|
||
|
|
|
||
|
|
hmSysSwitchVLANLearningMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ivl (1),
|
||
|
|
svl (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the VLAN learning mode by the switch.
|
||
|
|
When set to IVL Independend VLAN Learning is active.
|
||
|
|
When set to SVL Shared VLAN Learning is active.
|
||
|
|
After setting this variable the switch have to be restarted."
|
||
|
|
DEFVAL { ivl }
|
||
|
|
::= { hmSysSwitchVLANGroup 1 }
|
||
|
|
|
||
|
|
hmSysSwitchVLANLearningStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ivl (1),
|
||
|
|
svl (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the current VLAN learning mode.
|
||
|
|
When set to IVL Independend VLAN Learning is active.
|
||
|
|
When set to SVL Shared VLAN Learning is active."
|
||
|
|
::= { hmSysSwitchVLANGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSysSwitchServiceModeGroup OBJECT IDENTIFIER ::= { hmSysSwitchGroup 11 }
|
||
|
|
|
||
|
|
hmSysSwitchServiceMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables the service mode.
|
||
|
|
If enabled, the switch can be separated into two switching areas
|
||
|
|
with the redundant power supply.
|
||
|
|
The two HIPER Ring ports are in area one.
|
||
|
|
The other ports are in area two.
|
||
|
|
Area one is VLAN capable, area two is not VLAN capable.
|
||
|
|
"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSysSwitchServiceModeGroup 1 }
|
||
|
|
|
||
|
|
hmSysSwitchServiceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defined the Vlan for the service mode.
|
||
|
|
The Vlan must be a valid Vlan and neither Vlan 0 (mgmt vlan)
|
||
|
|
nor Vlan 1 (Default Vlan)."
|
||
|
|
::= { hmSysSwitchServiceModeGroup 2 }
|
||
|
|
|
||
|
|
hmSysSwitchServiceModeOperState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If enabled, the switch has been separated into two switching areas
|
||
|
|
with the redundant power supply.
|
||
|
|
The two HIPER Ring ports are in area one.
|
||
|
|
The other ports are in area two.
|
||
|
|
Area one is VLAN capable, area two is not VLAN capable.
|
||
|
|
"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSysSwitchServiceModeGroup 3 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmSysSwitchRedundancyGroup
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSysSwitchRedundancyGroup OBJECT IDENTIFIER ::= { hmSysSwitchGroup 20 }
|
||
|
|
|
||
|
|
hmSysSwitchRedundancyRstpMrpMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rstp Mrp is enabled if this object is set to enable(1).
|
||
|
|
Rstp Mrp is disabled if this object is set to disable(2)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSysSwitchRedundancyGroup 1 }
|
||
|
|
|
||
|
|
hmSysSwitchRedundancyRstpMrpConfigError OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates a Rstp Mrp fail configuration if the value
|
||
|
|
true is shown."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmSysSwitchRedundancyGroup 2 }
|
||
|
|
|
||
|
|
hmSysSwitchRedundancyRstpMrpConfigErrorBridge OBJECT-TYPE
|
||
|
|
SYNTAX BridgeIdOrNull
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The identifier of the device which has a Rstp Mrp fail
|
||
|
|
configuration or Null if there is no fail configuration."
|
||
|
|
::= { hmSysSwitchRedundancyGroup 3 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / Selftest Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSysSelftestGroup OBJECT IDENTIFIER ::= { hmSystemTable 41 }
|
||
|
|
|
||
|
|
hmSysSelftestRAM OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls RAM selftest on coldstart of the device.
|
||
|
|
When disabled the device booting time is reduced."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSelftestGroup 1 }
|
||
|
|
|
||
|
|
hmSysSelftestRebootOnError OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If enabled the software does make a reboot if there is a
|
||
|
|
serious error detected."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSelftestGroup 2 }
|
||
|
|
|
||
|
|
hmSysSelftestMMUStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of the memory managment unit."
|
||
|
|
::= { hmSysSelftestGroup 3 }
|
||
|
|
|
||
|
|
hmSysSelftestRebootOnHdxError OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If enabled the software does a reboot if there is a
|
||
|
|
Half duplex mismatch error is detected. The option depends on hmSysSelftestRebootOnError."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmSysSelftestGroup 4 }
|
||
|
|
--
|
||
|
|
-- System / OEM Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSysOEMGroup OBJECT IDENTIFIER ::= { hmSystemTable 42 }
|
||
|
|
|
||
|
|
hmSysOEMID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Unique OEM ID."
|
||
|
|
::= { hmSysOEMGroup 1 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / MaxSignalContacts
|
||
|
|
--
|
||
|
|
hmSysMaxSignalContacts OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of signal contacts for this chassis. Within
|
||
|
|
each managed chassis/switch, the groups are uniquely numbered
|
||
|
|
in the range from 1 to hmSysMaxSignalContacts."
|
||
|
|
::= { hmSystemTable 43 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / EmWeb Web Server HTTPS Configuration
|
||
|
|
--
|
||
|
|
hmSysHttpsEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/Disables HTTPS access to the device. A (1) enables, a (2) disables."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 44 }
|
||
|
|
|
||
|
|
hmSysHttpsPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (1..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the HTTPS web server."
|
||
|
|
DEFVAL { 443 }
|
||
|
|
::= { hmSystemTable 45 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- System / Skip Aca on boot
|
||
|
|
--
|
||
|
|
hmSysSkipAcaOnBoot OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable/disable loading from ACA on startup."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSystemTable 46 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / Power Supply Table --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmPSTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables related to the power supply
|
||
|
|
units of the chassis/switch. For each power supply slot exists
|
||
|
|
one instance."
|
||
|
|
::= { hmChassis 2 }
|
||
|
|
|
||
|
|
hmPSEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmPSTable."
|
||
|
|
INDEX { hmPSSysID, hmPSID }
|
||
|
|
::= { hmPSTable 1}
|
||
|
|
|
||
|
|
HmPSEntry ::= SEQUENCE {
|
||
|
|
hmPSSysID Integer32,
|
||
|
|
hmPSID Integer32,
|
||
|
|
hmPSState INTEGER,
|
||
|
|
hmPSType INTEGER,
|
||
|
|
hmPSVersion Integer32,
|
||
|
|
hmPSDescription DisplayString,
|
||
|
|
hmPSSerialNumber DisplayString,
|
||
|
|
hmPSProductCode DisplayString,
|
||
|
|
hmPSPowerBudget Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPSSysID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of SysID is assigned so as to uniquely identify a
|
||
|
|
chassis/switch among the subordinate managed objects of the
|
||
|
|
system."
|
||
|
|
::= { hmPSEntry 1 }
|
||
|
|
|
||
|
|
hmPSID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Index is used to identify the associated power supply
|
||
|
|
unit."
|
||
|
|
::= { hmPSEntry 2 }
|
||
|
|
|
||
|
|
hmPSState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok (1),
|
||
|
|
failed (2),
|
||
|
|
notInstalled (3),
|
||
|
|
unknown (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the operational state of the associated power
|
||
|
|
supply. If the value of this variable changes, a hmPowerSupply
|
||
|
|
trap is sent."
|
||
|
|
::= { hmPSEntry 3 }
|
||
|
|
|
||
|
|
hmPSType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
ac-dc (2),
|
||
|
|
dc-dc-24v-1 (3),
|
||
|
|
dc-dc-48v-1 (4),
|
||
|
|
dc-dc-24v-2 (5),
|
||
|
|
dc-dc-48v-2 (6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of the associated power supply."
|
||
|
|
::= { hmPSEntry 4 }
|
||
|
|
|
||
|
|
hmPSVersion OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Version of the associated power supply."
|
||
|
|
::= { hmPSEntry 5 }
|
||
|
|
|
||
|
|
hmPSDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description of the associated power supply."
|
||
|
|
::= { hmPSEntry 6 }
|
||
|
|
|
||
|
|
hmPSSerialNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial number of the associated power supply."
|
||
|
|
::= { hmPSEntry 7 }
|
||
|
|
|
||
|
|
hmPSProductCode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Product code of the associated power supply."
|
||
|
|
::= { hmPSEntry 8 }
|
||
|
|
|
||
|
|
hmPSPowerBudget OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Power budget of the associated power supply."
|
||
|
|
::= { hmPSEntry 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / Fan Table --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmFanTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmFanEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables related to the fan units
|
||
|
|
of the chassis/switch. For each fan slot exists one instance."
|
||
|
|
::= { hmChassis 3 }
|
||
|
|
|
||
|
|
hmFanEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmFanEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmFanTable."
|
||
|
|
INDEX { hmFanSysID, hmFanID }
|
||
|
|
::= { hmFanTable 1 }
|
||
|
|
|
||
|
|
HmFanEntry ::= SEQUENCE {
|
||
|
|
hmFanSysID Integer32,
|
||
|
|
hmFanID Integer32,
|
||
|
|
hmFanState INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmFanSysID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of SysID is assigned so as to uniquely identify a
|
||
|
|
chassis among the subordinate managed objects of the system."
|
||
|
|
::= { hmFanEntry 1 }
|
||
|
|
|
||
|
|
hmFanID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This Index is used to identify the associated fan."
|
||
|
|
::= { hmFanEntry 2 }
|
||
|
|
|
||
|
|
hmFanState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok (1),
|
||
|
|
failed (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the operational state of the associated fan."
|
||
|
|
::= { hmFanEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / Priority forwarding options
|
||
|
|
--
|
||
|
|
hmFwdPriorityConfiguration OBJECT IDENTIFIER ::= { hmChassis 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmPrioTOSEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Global configuration of feature IP-TOS priority to
|
||
|
|
802.1D-1998 priority. If enabled, the priority of the
|
||
|
|
TOS field is mapped to 802.1D priority"
|
||
|
|
::= { hmFwdPriorityConfiguration 1 }
|
||
|
|
|
||
|
|
hmPrioMACAddressEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Global configuration of feature priority by MAC address.
|
||
|
|
If enabled, for each static MAC address a priority
|
||
|
|
could be specified"
|
||
|
|
::= { hmFwdPriorityConfiguration 2 }
|
||
|
|
|
||
|
|
hmPrioVlan0TagTransparentMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"enables or disables the transparent mode for
|
||
|
|
priority tagged frames (frames with VLAN-ID 0)
|
||
|
|
for the switch unit."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmFwdPriorityConfiguration 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- MAC Address to Priority Mapping Table
|
||
|
|
hmPrioMACAddressTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPrioMACAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Table for assigning priority to MAC addresses"
|
||
|
|
::= { hmFwdPriorityConfiguration 10 }
|
||
|
|
|
||
|
|
hmPrioMACAddressEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPrioMACAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmPrioMACAddressTable."
|
||
|
|
INDEX { hmPrioMACAddress, hmPrioMACReceivePort }
|
||
|
|
::= { hmPrioMACAddressTable 1 }
|
||
|
|
|
||
|
|
HmPrioMACAddressEntry ::= SEQUENCE {
|
||
|
|
hmPrioMACAddress MacAddress,
|
||
|
|
hmPrioMACReceivePort Integer32,
|
||
|
|
hmPrioMACPriority Integer32,
|
||
|
|
hmPrioMACStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPrioMACAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"same as dot1dStaticAddress"
|
||
|
|
::= { hmPrioMACAddressEntry 1 }
|
||
|
|
|
||
|
|
hmPrioMACReceivePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"to be compatible with dot1dStaticTable"
|
||
|
|
::= { hmPrioMACAddressEntry 2 }
|
||
|
|
|
||
|
|
hmPrioMACPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..9)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"priority value for the frame with the specific
|
||
|
|
destination MAC address.
|
||
|
|
0..7: priority
|
||
|
|
8 : disabled (no priority by MAC address)
|
||
|
|
9 : discard the frame "
|
||
|
|
::= { hmPrioMACAddressEntry 3 }
|
||
|
|
|
||
|
|
hmPrioMACStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
invalid(2),
|
||
|
|
permanent(3),
|
||
|
|
deleteOnReset(4),
|
||
|
|
deleteOnTimeout(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"status flag according to dot1dStaticStatus"
|
||
|
|
::= { hmPrioMACAddressEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Traffic Class Configuration Table
|
||
|
|
hmPrioTrafficClassTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPrioTrafficClassEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Translation table for traffic classes to 802.1D-1998 priority"
|
||
|
|
::= { hmFwdPriorityConfiguration 11 }
|
||
|
|
|
||
|
|
hmPrioTrafficClassEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPrioTrafficClassEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmPrioTrafficClassTable."
|
||
|
|
INDEX { hmPrioTrafficClassID }
|
||
|
|
::= { hmPrioTrafficClassTable 1 }
|
||
|
|
|
||
|
|
HmPrioTrafficClassEntry ::= SEQUENCE {
|
||
|
|
hmPrioTrafficClassID Integer32,
|
||
|
|
hmPrioTrafficClassWeight Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPrioTrafficClassID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated traffic class"
|
||
|
|
::= { hmPrioTrafficClassEntry 1 }
|
||
|
|
|
||
|
|
hmPrioTrafficClassWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..100)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"With this parameter the queue mode of each
|
||
|
|
traffic class can be set.
|
||
|
|
2..99: weight for WFQ (Weighted-Fair-Queuing)
|
||
|
|
100: strict priority"
|
||
|
|
::= { hmPrioTrafficClassEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- TOS Field to Prio Tag Configuration Table
|
||
|
|
hmPrioTosToPrioTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPrioTosToPrioEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Translation table IP-TOS priority to 802.1D-1998 priority"
|
||
|
|
::= { hmFwdPriorityConfiguration 12 }
|
||
|
|
|
||
|
|
hmPrioTosToPrioEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPrioTosToPrioEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmPrioTosToPrioEntry."
|
||
|
|
INDEX { hmPrioTTPTos }
|
||
|
|
::= { hmPrioTosToPrioTable 1 }
|
||
|
|
|
||
|
|
HmPrioTosToPrioEntry ::= SEQUENCE {
|
||
|
|
hmPrioTTPTos Integer32,
|
||
|
|
hmPrioTTPPrio Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPrioTTPTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated TOS value"
|
||
|
|
::= { hmPrioTosToPrioEntry 1 }
|
||
|
|
|
||
|
|
hmPrioTTPPrio OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated 802.1D priority"
|
||
|
|
::= { hmPrioTosToPrioEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- The Private Static and Dynamic (Destination-Address Filtering) Database
|
||
|
|
|
||
|
|
|
||
|
|
hmCurrentAddressTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmCurrentAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing filtering information
|
||
|
|
configured into the bridge by (local or network)
|
||
|
|
management or dynamic by GMRP or IGMP Snooping
|
||
|
|
specifying the set of ports to which
|
||
|
|
frames received from specific ports and containing
|
||
|
|
specific destination addresses are allowed to be
|
||
|
|
forwarded. The value of zero in this table as the
|
||
|
|
port number from which frames with a specific
|
||
|
|
destination address are received, is used to
|
||
|
|
specify all ports for which there is no specific
|
||
|
|
entry in this table for that particular
|
||
|
|
destination address. Entries are valid for
|
||
|
|
unicast and for group/broadcast addresses."
|
||
|
|
::= { hmChassis 5 }
|
||
|
|
|
||
|
|
hmCurrentAddressEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmCurrentAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Filtering information configured into the bridge
|
||
|
|
by (local or network) management specifying the
|
||
|
|
set of ports to which frames received from a
|
||
|
|
specific port and containing a specific
|
||
|
|
destination address are allowed to be forwarded."
|
||
|
|
|
||
|
|
|
||
|
|
INDEX { hmCurrentAddress, hmCurrentAddressReceivePort }
|
||
|
|
::= { hmCurrentAddressTable 1 }
|
||
|
|
|
||
|
|
HmCurrentAddressEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmCurrentAddress MacAddress,
|
||
|
|
hmCurrentAddressReceivePort Integer32,
|
||
|
|
hmCurrentAddressStaticEgressPorts OCTET STRING,
|
||
|
|
hmCurrentAddressEgressPorts OCTET STRING,
|
||
|
|
hmCurrentAddressStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmCurrentAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The destination MAC address in a frame to which
|
||
|
|
this entry's filtering information applies. This
|
||
|
|
object can take the value of a unicast address, a
|
||
|
|
group address or the broadcast address."
|
||
|
|
::= { hmCurrentAddressEntry 1 }
|
||
|
|
|
||
|
|
hmCurrentAddressReceivePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Either the value '0', or the port number of the
|
||
|
|
port from which a frame must be received in order
|
||
|
|
for this entry's filtering information to apply.
|
||
|
|
A value of zero indicates that this entry applies
|
||
|
|
on all ports of the bridge for which there is no
|
||
|
|
other applicable entry."
|
||
|
|
::= { hmCurrentAddressEntry 2 }
|
||
|
|
|
||
|
|
hmCurrentAddressStaticEgressPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports to which frames received from a
|
||
|
|
specific port and destined for a specific MAC
|
||
|
|
address, are allowed to be forwarded. Each octet
|
||
|
|
within the value of this object specifies a set of
|
||
|
|
eight ports, with the first octet specifying ports
|
||
|
|
1 through 8, the second octet specifying ports 9
|
||
|
|
through 16, etc. Within each octet, the most
|
||
|
|
significant bit represents the lowest numbered
|
||
|
|
port, and the least significant bit represents the
|
||
|
|
highest numbered port. Thus, each port of the
|
||
|
|
bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of
|
||
|
|
'1' then that port is included in the set of
|
||
|
|
ports; the port is not included if its bit has a
|
||
|
|
value of '0'. (Note that the setting of the bit
|
||
|
|
corresponding to the port from which a frame is
|
||
|
|
received is irrelevant.) The default value of
|
||
|
|
this object is a string of ones of appropriate
|
||
|
|
length."
|
||
|
|
::= { hmCurrentAddressEntry 3 }
|
||
|
|
|
||
|
|
hmCurrentAddressEgressPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The complete set of ports, to which frames destined
|
||
|
|
for this Group MAC Address are currently being forwarded.
|
||
|
|
This includes Group MAC Addresses which were set statically
|
||
|
|
or which were learnt by GMRP or some other dynamic mechanism.
|
||
|
|
Each octet within the value of this object specifies
|
||
|
|
a set of eight ports, with the first octet specifying
|
||
|
|
ports 1 through 8, the second octet specifying ports 9
|
||
|
|
through 16, etc. Within each octet, the most
|
||
|
|
significant bit represents the lowest numbered
|
||
|
|
port, and the least significant bit represents the
|
||
|
|
highest numbered port. Thus, each port of the
|
||
|
|
bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of
|
||
|
|
'1' then that port is included in the set of
|
||
|
|
ports; the port is not included if its bit has a
|
||
|
|
value of '0'. (Note that the setting of the bit
|
||
|
|
corresponding to the port from which a frame is
|
||
|
|
received is irrelevant.) The default value of
|
||
|
|
this object is a string of ones of appropriate
|
||
|
|
length."
|
||
|
|
::= { hmCurrentAddressEntry 4 }
|
||
|
|
|
||
|
|
hmCurrentAddressStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
invalid(2),
|
||
|
|
permanent(3),
|
||
|
|
deleteOnReset(4),
|
||
|
|
deleteOnTimeout(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the status of this entry.
|
||
|
|
The default value is permanent(3).
|
||
|
|
|
||
|
|
other(1) - this entry is currently in use but
|
||
|
|
the conditions under which it will
|
||
|
|
remain so are different from each of the
|
||
|
|
following values.
|
||
|
|
invalid(2) - writing this value to the object
|
||
|
|
removes the corresponding entry.
|
||
|
|
permanent(3) - this entry is currently in use
|
||
|
|
and will remain so after the next reset
|
||
|
|
of the bridge.
|
||
|
|
deleteOnReset(4) - this entry is currently in
|
||
|
|
use and will remain so until the next
|
||
|
|
reset of the bridge.
|
||
|
|
deleteOnTimeout(5) - this entry is currently
|
||
|
|
in use and will remain so until it is
|
||
|
|
aged out."
|
||
|
|
::= { hmCurrentAddressEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / RS/2 specifics --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2ext OBJECT IDENTIFIER ::= { hmChassis 10 }
|
||
|
|
|
||
|
|
hmRS2OperMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal (1),
|
||
|
|
standby-active (2),
|
||
|
|
standby-inactive (3),
|
||
|
|
redundancy-manager-active (4),
|
||
|
|
redundancy-manager-inactive (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"hmRS2OperMode shows the operational mode of the system:
|
||
|
|
normal: normal mode,
|
||
|
|
standby-active: standby mode, but switch is active, because
|
||
|
|
the master switch is e.g. not reachable,
|
||
|
|
standby-inactive: stand by mode,
|
||
|
|
redundancy-manager-active: redundancy mode and redundancy-manager has
|
||
|
|
closed RS2 ring,
|
||
|
|
redundancy-manager-inactive: redundancy mode and redundancy-manager has
|
||
|
|
opened RS2 ring.
|
||
|
|
If the value changes, a trap is sent."
|
||
|
|
::= { hmRS2ext 1 }
|
||
|
|
|
||
|
|
hmRS2ConfigError OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
no-error (1),
|
||
|
|
error (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"RS2hmConfigError indicates a configuration error of the
|
||
|
|
system:
|
||
|
|
no error: no configuration error,
|
||
|
|
error: in normal mode hmConfigError indicates failure of
|
||
|
|
control line or connection of 2 RS2 in normal mode,
|
||
|
|
in stand by mode hmConfigError indicates absence of
|
||
|
|
control line, failure of control line or connection
|
||
|
|
of 2 RS2 in stand by mode."
|
||
|
|
::= { hmRS2ext 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmRS2SigRelayState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on (1),
|
||
|
|
off (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"hmRS2SigRelayState shows the state of the (non potential)
|
||
|
|
signalling relay in standard mode:
|
||
|
|
off: ok,
|
||
|
|
on: powersupply not ok or linkstate of a port not ok or
|
||
|
|
configuration error, see power supply table or
|
||
|
|
ifMauTable (attribute ifMauMediaAvailable) or
|
||
|
|
hmConfigError for details."
|
||
|
|
::= { hmRS2ext 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / alarm-table for links --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmSigLinkTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSigLinkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables to mask an alarm for the
|
||
|
|
signalling relay, produced by a link. The index for a link
|
||
|
|
corresponds with ifMauIfIndex."
|
||
|
|
::= { hmRS2ext 4 }
|
||
|
|
|
||
|
|
hmSigLinkEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSigLinkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmSigLinkTable."
|
||
|
|
INDEX { hmSigLinkID }
|
||
|
|
::= { hmSigLinkTable 1 }
|
||
|
|
|
||
|
|
HmSigLinkEntry ::= SEQUENCE {
|
||
|
|
hmSigLinkID Integer32,
|
||
|
|
hmSigLinkAlarm INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSigLinkID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated link and
|
||
|
|
corresponds with ifMauIfIndex."
|
||
|
|
::= { hmSigLinkEntry 1 }
|
||
|
|
|
||
|
|
hmSigLinkAlarm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on (1),
|
||
|
|
off (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether an alarm for the signalling relay of the
|
||
|
|
associated link will be produced or not, so you can mask the
|
||
|
|
value of ifMauMediaAvailable."
|
||
|
|
::= { hmSigLinkEntry 2 }
|
||
|
|
|
||
|
|
hmSigTrapReason OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the reason for a trap. There are
|
||
|
|
three reasons for a trap:
|
||
|
|
hmRS2ConfigError
|
||
|
|
ifMauMediaAvailable
|
||
|
|
hmPSState
|
||
|
|
The entity which produces the trap, is specified by
|
||
|
|
hmSigReasonIndex."
|
||
|
|
::= { hmRS2ext 5 }
|
||
|
|
|
||
|
|
hmSigReasonIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute specifies the entity which produces the trap.
|
||
|
|
1 - n: index of powersupply table / interfaces table
|
||
|
|
0: config-error."
|
||
|
|
::= { hmRS2ext 6 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / topologie-table for rs2-rings --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2TopologyGroup OBJECT IDENTIFIER ::= { hmRS2ext 7 }
|
||
|
|
|
||
|
|
hmRS2PartnerIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable can be used to set manually the
|
||
|
|
redundancy partner of the RS2 agent."
|
||
|
|
::= { hmRS2TopologyGroup 1 }
|
||
|
|
|
||
|
|
hmRS2TopologyTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmRS2TopologyEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table describes the topology of rs2-rings."
|
||
|
|
::= { hmRS2TopologyGroup 2 }
|
||
|
|
|
||
|
|
hmRS2TopologyEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmRS2TopologyEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmRS2TopologyTable."
|
||
|
|
INDEX { hmRS2TopologyLinkID }
|
||
|
|
::= { hmRS2TopologyTable 1 }
|
||
|
|
|
||
|
|
HmRS2TopologyEntry ::= SEQUENCE {
|
||
|
|
hmRS2TopologyLinkID Integer32,
|
||
|
|
hmRS2TopologyIpAddress IpAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
hmRS2TopologyLinkID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated link and
|
||
|
|
corresponds with ifMauIfIndex."
|
||
|
|
::= { hmRS2TopologyEntry 1 }
|
||
|
|
|
||
|
|
hmRS2TopologyIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable can be used to set manually the next RS2 agent."
|
||
|
|
::= { hmRS2TopologyEntry 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / connection mirroring-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2ConnectionMirroringGroup OBJECT IDENTIFIER ::= { hmRS2ext 8 }
|
||
|
|
|
||
|
|
hmRS2ConnectionMirroringStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
inactive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this variable to configure the status of the
|
||
|
|
connection mirroring functionality.
|
||
|
|
The definition of a destination port is not required."
|
||
|
|
::= { hmRS2ConnectionMirroringGroup 1 }
|
||
|
|
|
||
|
|
hmRS2ConnectionMirroringPortOne OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this variable to the first port to be mirrored."
|
||
|
|
::= { hmRS2ConnectionMirroringGroup 2 }
|
||
|
|
|
||
|
|
hmRS2ConnectionMirroringPortTwo OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this variable to the second port to be mirrored."
|
||
|
|
::= { hmRS2ConnectionMirroringGroup 3 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / disable learning-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2DisableLearningGroup OBJECT IDENTIFIER ::= { hmRS2ext 9 }
|
||
|
|
|
||
|
|
hmRS2DisableLearningStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
inactive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When set to active the Learning Process is disabled,
|
||
|
|
no new Dynamic Filtering Entries are created and
|
||
|
|
exsisting Dynamic Filtering Entries are removed from
|
||
|
|
the Filtering Database.
|
||
|
|
Static Filtering Entries and Group Registration Entries
|
||
|
|
are not affected."
|
||
|
|
::= { hmRS2DisableLearningGroup 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / signalling relay-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2SigRelayGroup OBJECT IDENTIFIER ::= { hmRS2ext 10 }
|
||
|
|
|
||
|
|
hmRS2SigRelayMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
standard(1),
|
||
|
|
manual(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When set to standard, this is the default,
|
||
|
|
the signalling relay shows the state of
|
||
|
|
hmRS2SigRelayState.
|
||
|
|
When set to manual, the relay is controlled
|
||
|
|
by hmRS2SigRelayManualState."
|
||
|
|
::= { hmRS2SigRelayGroup 1 }
|
||
|
|
|
||
|
|
hmRS2SigRelayManualState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When set to on, this is the default,
|
||
|
|
the signalling relay is opened.
|
||
|
|
When set to off the relay is closed."
|
||
|
|
::= { hmRS2SigRelayGroup 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / vlan-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2VlanGroup OBJECT IDENTIFIER ::= { hmRS2ext 11 }
|
||
|
|
|
||
|
|
hmRS2VlanMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the VLAN mode on this device.
|
||
|
|
When enabled the switch will operate in 802.1Q mode,
|
||
|
|
else in 802.1d mode.
|
||
|
|
After setting this variable the switch have to be reset.
|
||
|
|
The default value is disable."
|
||
|
|
::= { hmRS2VlanGroup 1 }
|
||
|
|
|
||
|
|
hmRS2VlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the current VLAN mode of this device.
|
||
|
|
When enabled the switch operates in 802.1Q mode,
|
||
|
|
else in 802.1d mode."
|
||
|
|
::= { hmRS2VlanGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / selftest-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2SelftestGroup OBJECT IDENTIFIER ::= { hmRS2ext 12 }
|
||
|
|
|
||
|
|
hmRS2SelftestResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: error switch memory
|
||
|
|
"
|
||
|
|
::= { hmRS2SelftestGroup 1 }
|
||
|
|
|
||
|
|
hmRS2SelftestMode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Mode of the selftest coded as an integer value
|
||
|
|
with each bit representing a special behaviour
|
||
|
|
of the tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: reboot on failure
|
||
|
|
Bit 1: show failure with hmRS2SigRelayState
|
||
|
|
(a trap will be send also)
|
||
|
|
Bit 2: do switch memory test on start up
|
||
|
|
Bit 3: Clear Bit 2 after next reboot if test has been
|
||
|
|
successfully completed
|
||
|
|
"
|
||
|
|
::= { hmRS2SelftestGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / powersupply-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2PSGroup OBJECT IDENTIFIER ::= { hmRS2ext 13 }
|
||
|
|
|
||
|
|
hmRS2PSAlarm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables an alarm for the signalling relay of the
|
||
|
|
powersupply state."
|
||
|
|
::= { hmRS2PSGroup 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / powersupply-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2RedundancyGroup OBJECT IDENTIFIER ::= { hmRS2ext 14 }
|
||
|
|
|
||
|
|
hmRS2RedNotGuaranteedAlarm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When enabled the message 'redundancy not guaranteed' will be
|
||
|
|
signalled on the signalling relay."
|
||
|
|
::= { hmRS2RedundancyGroup 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / RS2-4R specifics --
|
||
|
|
--
|
||
|
|
hmRS4RGroup OBJECT IDENTIFIER ::= { hmRS2ext 15 }
|
||
|
|
|
||
|
|
hmRS4RVlanGroup OBJECT IDENTIFIER ::= { hmRS4RGroup 1 }
|
||
|
|
|
||
|
|
hmRS4RVlanPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmRS4RVlanPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table describes private vlan enhancements of rs2-4r devices."
|
||
|
|
::= { hmRS4RVlanGroup 1 }
|
||
|
|
|
||
|
|
hmRS4RVlanPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmRS4RVlanPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmRS4RVlanPortTable."
|
||
|
|
INDEX { hmRS4RVlanPortID }
|
||
|
|
::= { hmRS4RVlanPortTable 1 }
|
||
|
|
|
||
|
|
HmRS4RVlanPortEntry ::= SEQUENCE {
|
||
|
|
hmRS4RVlanPortID Integer32,
|
||
|
|
hmRS4RVlanPortTagFormatRstp INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmRS4RVlanPortID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the port."
|
||
|
|
::= { hmRS4RVlanPortEntry 1 }
|
||
|
|
|
||
|
|
hmRS4RVlanPortTagFormatRstp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When enabled all tags are removed when sending packets on the port (egress).
|
||
|
|
When disabled tag format is not changed, but RSTP frames are sent tagged.
|
||
|
|
This variable is only used if RSTP is enabled.
|
||
|
|
The default value is enable."
|
||
|
|
::= { hmRS4RVlanPortEntry 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- rs2-specifics / fdb-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRS2FDBGroup OBJECT IDENTIFIER ::= { hmRS2ext 16 }
|
||
|
|
hmRS2FDBHashGroup OBJECT IDENTIFIER ::= { hmRS2FDBGroup 1 }
|
||
|
|
|
||
|
|
hmRS2FDBHashOptimizingMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the hash optimizing mode on this device.
|
||
|
|
When enabled the switch will use another hash algorithm
|
||
|
|
optimized for incrementing addresses.
|
||
|
|
After setting this variable the switch have to be reset.
|
||
|
|
The default value is disable."
|
||
|
|
::= { hmRS2FDBHashGroup 1 }
|
||
|
|
|
||
|
|
hmRS2FDBHashOptimizingStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the current hash mode of this device.
|
||
|
|
When enabled the switch uses the optimized hash mode,
|
||
|
|
else the normal mode."
|
||
|
|
::= { hmRS2FDBHashGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / MACH3 specifics --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmMACH3ChassisExt OBJECT IDENTIFIER ::= { hmChassis 11 }
|
||
|
|
|
||
|
|
hmSelfTestResults OBJECT IDENTIFIER ::= { hmMACH3ChassisExt 1 }
|
||
|
|
|
||
|
|
hmSelfTestCpuResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits 0..15 set in the result indicate
|
||
|
|
warning conditions, bits 16..31 indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: default configuration activated and running
|
||
|
|
|
||
|
|
Bit 2: BB_DATAMEM_ERROR caused by log-entry:
|
||
|
|
S_mmcssp_CRC_ERROR_DATAMEM ( in mmcNP5400Int() )
|
||
|
|
S_mmcssp_LEN_ERROR_DATAMEM ( in mmcNP5400Int() )
|
||
|
|
Bit 3: BB_PARITY_ERROR caused by log-entry:
|
||
|
|
S_mmcssp_PER_ON_VIX_OR_IPC ( in mmcNP5400Int() )
|
||
|
|
S_mmcssp_PE_PIF_VIX_DATA ( in mmcEpifPintProc(), mmcGpifPintProc(), mmcXpifPintProc() )
|
||
|
|
S_mmcssp_PE_PIF_GGI ( in mmcGpifPintProc(), mmcXpifPintProc() )
|
||
|
|
Bit 4: BOOT_ERROR_PIF caused by log-entry:
|
||
|
|
S_mmcssp_PIF_BOOT_ERROR ( in mmcEpifPintProc(), mmcGpifPintProc(), mmcXpifPintProc() )
|
||
|
|
Bit 5: MMC_PORT_PROBLEM caused by log-entry:
|
||
|
|
S_mmcssp_WRONG_PORT_IN_MSG ( in mmcGotAliveMsg() )
|
||
|
|
S_mmcssp_NO_ADDRESS_FOR_PORT ( in mmcPortConfig() )
|
||
|
|
|
||
|
|
Bit 16: configuration data in bootblock of flash was invalid through startup
|
||
|
|
Bit 17: configuration in flash is corrupted
|
||
|
|
"
|
||
|
|
::= { hmSelfTestResults 1 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSelfTestBBResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: selftest error of backplane port no 1
|
||
|
|
Bit 1: selftest error of backplane port no 2
|
||
|
|
Bit 2: selftest error of backplane port no 3
|
||
|
|
Bit 3: selftest error of backplane port no 4
|
||
|
|
Bit 8: selftest error of network processor no 1
|
||
|
|
Bit 9: selftest error of network processor no 2
|
||
|
|
Bit 10: selftest error of network processor no 3
|
||
|
|
Bit 11: selftest error of network processor no 4
|
||
|
|
Bit 12: selftest error of xpif no 1
|
||
|
|
Bit 13: selftest error of xpif no 2
|
||
|
|
Bit 14: selftest error of xpif no 3
|
||
|
|
Bit 15: selftest error of xpif no 4
|
||
|
|
Bit 16: error packet memory size
|
||
|
|
Bit 30: error on board eeprom"
|
||
|
|
::= { hmSelfTestResults 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSelfTestBPResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: communication error with card 1
|
||
|
|
Bit 1: communication error with card 2
|
||
|
|
Bit 2: communication error with card 3
|
||
|
|
Bit 3: communication error with card 4
|
||
|
|
Bit 4: communication error with card 5
|
||
|
|
Bit 24: main and redundant eeprom 2 are different
|
||
|
|
Bit 25: main and redundant eeprom 1 are different
|
||
|
|
Bit 27: error on redundant eeprom 2
|
||
|
|
Bit 28: error on redundant eeprom 1
|
||
|
|
Bit 29: error on main eeprom 2
|
||
|
|
Bit 30: error on main eeprom 1"
|
||
|
|
::= { hmSelfTestResults 3 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSelfTestM1Result OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: selftest error of port no 1
|
||
|
|
Bit 1: selftest error of port no 2
|
||
|
|
Bit 2: selftest error of port no 3
|
||
|
|
Bit 3: selftest error of port no 4
|
||
|
|
Bit 4: selftest error of port no 5
|
||
|
|
Bit 5: selftest error of port no 6
|
||
|
|
Bit 6: selftest error of port no 7
|
||
|
|
Bit 7: selftest error of port no 8
|
||
|
|
Bit 16: selftest error of pif no 1
|
||
|
|
Bit 17: selftest error of pif no 2
|
||
|
|
Bit 30: error on module eeprom"
|
||
|
|
::= { hmSelfTestResults 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSelfTestM2Result OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: selftest error of port no 1
|
||
|
|
Bit 1: selftest error of port no 2
|
||
|
|
Bit 2: selftest error of port no 3
|
||
|
|
Bit 3: selftest error of port no 4
|
||
|
|
Bit 4: selftest error of port no 5
|
||
|
|
Bit 5: selftest error of port no 6
|
||
|
|
Bit 6: selftest error of port no 7
|
||
|
|
Bit 7: selftest error of port no 8
|
||
|
|
Bit 16: selftest error of pif no 1
|
||
|
|
Bit 17: selftest error of pif no 2
|
||
|
|
Bit 30: error on module eeprom"
|
||
|
|
::= { hmSelfTestResults 5 }
|
||
|
|
|
||
|
|
hmSelfTestM3Result OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: selftest error of port no 1
|
||
|
|
Bit 1: selftest error of port no 2
|
||
|
|
Bit 2: selftest error of port no 3
|
||
|
|
Bit 3: selftest error of port no 4
|
||
|
|
Bit 4: selftest error of port no 5
|
||
|
|
Bit 5: selftest error of port no 6
|
||
|
|
Bit 6: selftest error of port no 7
|
||
|
|
Bit 7: selftest error of port no 8
|
||
|
|
Bit 16: selftest error of pif no 1
|
||
|
|
Bit 17: selftest error of pif no 2
|
||
|
|
Bit 30: error on module eeprom"
|
||
|
|
::= { hmSelfTestResults 6 }
|
||
|
|
|
||
|
|
hmSelfTestM4Result OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the selftest coded as an integer value
|
||
|
|
with each bit representing the result of a different
|
||
|
|
sub part test. Bits set in the result indicate error
|
||
|
|
conditions of the sub part tests.
|
||
|
|
|
||
|
|
Meaning of the bits:
|
||
|
|
Bit 0: selftest error of port no 1
|
||
|
|
Bit 1: selftest error of port no 2
|
||
|
|
Bit 2: selftest error of port no 3
|
||
|
|
Bit 3: selftest error of port no 4
|
||
|
|
Bit 4: selftest error of port no 5
|
||
|
|
Bit 5: selftest error of port no 6
|
||
|
|
Bit 6: selftest error of port no 7
|
||
|
|
Bit 7: selftest error of port no 8
|
||
|
|
Bit 16: selftest error of pif no 1
|
||
|
|
Bit 17: selftest error of pif no 2
|
||
|
|
Bit 30: error on module eeprom"
|
||
|
|
::= { hmSelfTestResults 7 }
|
||
|
|
|
||
|
|
hmSelfTestMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Setting this variable to enable(1) results in a full
|
||
|
|
report of all detected selftest errors.
|
||
|
|
The default value is disable(2). "
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSelfTestResults 8 }
|
||
|
|
|
||
|
|
hmMgmtBusSelected OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
main (1),
|
||
|
|
redundant (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"this variable indicates which management bus is selected."
|
||
|
|
::= { hmMACH3ChassisExt 2 }
|
||
|
|
|
||
|
|
hmSerialNumbers OBJECT IDENTIFIER ::= { hmMACH3ChassisExt 3 }
|
||
|
|
|
||
|
|
hmSerialNumCpu OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of the CPU board."
|
||
|
|
::= { hmSerialNumbers 1 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumBB OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of the basic board."
|
||
|
|
::= { hmSerialNumbers 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumBP OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of the packplane unit."
|
||
|
|
::= { hmSerialNumbers 3 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumM1 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of module 1."
|
||
|
|
::= { hmSerialNumbers 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumM2 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of module 2."
|
||
|
|
::= { hmSerialNumbers 5 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumM3 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of module 3."
|
||
|
|
::= { hmSerialNumbers 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSerialNumM4 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Serial Number of module 4."
|
||
|
|
::= { hmSerialNumbers 7 }
|
||
|
|
|
||
|
|
|
||
|
|
hmPlugAndPlay OBJECT IDENTIFIER ::= { hmMACH3ChassisExt 4 }
|
||
|
|
|
||
|
|
hmAutoConfigState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled (1),
|
||
|
|
inProgess (2),
|
||
|
|
ready (3),
|
||
|
|
failed (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"state of the configuration retrieval from a neighbour card"
|
||
|
|
::= { hmPlugAndPlay 1 }
|
||
|
|
|
||
|
|
hmMACH3Misc OBJECT IDENTIFIER ::= { hmMACH3ChassisExt 5 }
|
||
|
|
|
||
|
|
hmUserGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active (1),
|
||
|
|
inactive (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"state of the user group configuration"
|
||
|
|
::= { hmMACH3Misc 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- chassis / AUI specifics --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmAUIGroup OBJECT IDENTIFIER ::= { hmChassis 12 }
|
||
|
|
|
||
|
|
hmAUIModuleTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAUIModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all AUI variables
|
||
|
|
that are module dependend."
|
||
|
|
::= { hmAUIGroup 10 }
|
||
|
|
|
||
|
|
hmAUIModuleEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAUIModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmAUIModuleTable."
|
||
|
|
INDEX { hmAUIModuleID }
|
||
|
|
::= { hmAUIModuleTable 1 }
|
||
|
|
|
||
|
|
HmAUIModuleEntry ::= SEQUENCE {
|
||
|
|
hmAUIModuleID Integer32,
|
||
|
|
hmAUIModuleDTEPowerMonitor INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAUIModuleID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify a specific module."
|
||
|
|
::= { hmAUIModuleEntry 1 }
|
||
|
|
|
||
|
|
hmAUIModuleDTEPowerMonitor OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable shows the DTE Power Monitor DIP switch
|
||
|
|
setting on the AUI module."
|
||
|
|
::= { hmAUIModuleEntry 2 }
|
||
|
|
|
||
|
|
hmAUIPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAUIPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all AUI variables
|
||
|
|
that are port dependend."
|
||
|
|
::= { hmAUIGroup 11 }
|
||
|
|
|
||
|
|
hmAUIPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAUIPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmAUIPortTable."
|
||
|
|
INDEX { hmAUIPortID }
|
||
|
|
::= { hmAUIPortTable 1 }
|
||
|
|
|
||
|
|
HmAUIPortEntry ::= SEQUENCE {
|
||
|
|
hmAUIPortID Integer32,
|
||
|
|
hmAUIPortDTEPower INTEGER,
|
||
|
|
hmAUIPortSQETest INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAUIPortID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify a specific port."
|
||
|
|
::= { hmAUIPortEntry 1 }
|
||
|
|
|
||
|
|
hmAUIPortDTEPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable shows the DTE Power value
|
||
|
|
of the AUI port."
|
||
|
|
::= { hmAUIPortEntry 2 }
|
||
|
|
|
||
|
|
hmAUIPortSQETest OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable shows the SQE Test DIP switch
|
||
|
|
setting on the AUI port."
|
||
|
|
::= { hmAUIPortEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- agent common attributes --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
reset (2),
|
||
|
|
resetStats(3),
|
||
|
|
resetFDB(4),
|
||
|
|
resetARP(5),
|
||
|
|
resetL3Stats(6),
|
||
|
|
resetL4-7Stats(7),
|
||
|
|
hotRestart(10),
|
||
|
|
|
||
|
|
-- now the global actions
|
||
|
|
gbl-reset(12)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object, when read, always returns a value of other(1).
|
||
|
|
A value of reset(2) has the same effect as a power-on sequence
|
||
|
|
(coldstart). Writing a value of hotRestart(10) leads to a warmstart.
|
||
|
|
When set to resetStats(3), a reset of all statistic
|
||
|
|
counters within the whole switch will be forced. A value of
|
||
|
|
resetFDB(4) will clear the forwarding database.
|
||
|
|
If set to resetARP(5), the ARP table will be flushed.
|
||
|
|
The value gbl-reset(12) will result in a reset of the whole
|
||
|
|
chassis. Any other value results in a badValue status code."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { hmAgent 1 }
|
||
|
|
|
||
|
|
hmActionResult OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the last activated action. A value of zero
|
||
|
|
indicates that the result is ok. Bits set in the result
|
||
|
|
indicate error conditions."
|
||
|
|
::= { hmAgent 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- agent / NetworkTable --
|
||
|
|
-- This table contains several network level configuration variables
|
||
|
|
-- for the switch.
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetwork OBJECT IDENTIFIER ::= { hmAgent 3 }
|
||
|
|
|
||
|
|
hmNetLocalIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP address of the management agent board.
|
||
|
|
Changing this value will take effect after activating with hmNetAction."
|
||
|
|
::= { hmNetwork 1 }
|
||
|
|
|
||
|
|
hmNetLocalPhysAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Physical base address (MAC-address) of the agent."
|
||
|
|
::= { hmNetwork 2 }
|
||
|
|
|
||
|
|
hmNetGatewayIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP address of the default gateway.
|
||
|
|
Changing this value will take effect after activating with hmNetAction."
|
||
|
|
::= { hmNetwork 3 }
|
||
|
|
|
||
|
|
hmNetMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Subnet mask.
|
||
|
|
Changing this value will take effect after activating with hmNetAction."
|
||
|
|
::= { hmNetwork 4 }
|
||
|
|
|
||
|
|
hmNetPPPBaseIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Base address of the IP address range used by the
|
||
|
|
point-to-point protocol. The IP addresses
|
||
|
|
hmNetPPPBaseAddress..hmNetPPPBaseAddress+4 are assigned
|
||
|
|
to the client machines attached to management agents 1..5.
|
||
|
|
The management agents can be reached using addresses
|
||
|
|
hmNetPPPBaseAddress+10..hmNetPPPBaseAddress+14.
|
||
|
|
Changing this variable on one agent automatically updates
|
||
|
|
the value on the other agents in the same chassis."
|
||
|
|
::= { hmNetwork 5 }
|
||
|
|
|
||
|
|
hmNetPPPNetMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Subnet mask used by the point-to-point protocol.
|
||
|
|
Changing this variable on one agent automatically updates
|
||
|
|
the value on the other agents in the same chassis."
|
||
|
|
::= { hmNetwork 6 }
|
||
|
|
|
||
|
|
hmNetAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
activate (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object, when read, always returns a value of other(1).
|
||
|
|
Setting the object to activate(2) causes a reconfiguration
|
||
|
|
of the IP protocol stack with the current values of
|
||
|
|
hmNetLocalIPAddr, hmNetGatewayIPAddr and hmNetMask."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { hmNetwork 7 }
|
||
|
|
|
||
|
|
hmNetVlanID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Vlan ID of the IP protocol stack. If the value is 0,
|
||
|
|
Traffic from all Vlans is accepted. Every other value means
|
||
|
|
that only traffic of the appropriate Vlan is accepted and outgoing
|
||
|
|
traffic uses this Vlan ID."
|
||
|
|
::= { hmNetwork 8 }
|
||
|
|
|
||
|
|
hmNetLocalPhysAddrRange OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of MAC addresses reserved for this device, starting from hmNetLocalPhysAddr."
|
||
|
|
::= { hmNetwork 9 }
|
||
|
|
|
||
|
|
hmNetVlanPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Vlan Priority which is used in management replies."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetwork 10 }
|
||
|
|
|
||
|
|
hmNetIpDscpPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP DSCP value which is used in management replies."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetwork 11 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / ip Address Conflict Detection group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetACDGroup OBJECT IDENTIFIER ::= { hmNetwork 12 }
|
||
|
|
|
||
|
|
hmNetACDStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
activeDetectionOnly(3),
|
||
|
|
passiveDetectionOnly(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the mode of the ip address conflict detection mechanism on this device.
|
||
|
|
enable(1): Both active and passive detection are active.
|
||
|
|
disable(2): No detection takes place.
|
||
|
|
activeDetectionOnly(3): During configuration of a local ip address
|
||
|
|
the device actively probes the network for this ip address.
|
||
|
|
passiveDetectionOnly(4): The device listens passively on the network
|
||
|
|
if another device with an already locally configured ip address appears.
|
||
|
|
In this case the own ip address is actively defended by transmitting gratituous arp's."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetACDGroup 1 }
|
||
|
|
|
||
|
|
hmNetACDOngoingProbeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If enabled, the device sends periodic arp probes."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetACDGroup 3 }
|
||
|
|
|
||
|
|
hmNetACDDelay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..500)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum detection delay time in milliseconds.
|
||
|
|
Time gap between arp probes."
|
||
|
|
DEFVAL { 200 }
|
||
|
|
::= { hmNetACDGroup 5 }
|
||
|
|
|
||
|
|
hmNetACDReleaseDelay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Delay in seconds to the next arp probe cycle
|
||
|
|
after an ip address conflict was detected."
|
||
|
|
DEFVAL { 15 }
|
||
|
|
::= { hmNetACDGroup 7 }
|
||
|
|
|
||
|
|
hmNetACDMaxProtection OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of frequent address protections."
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { hmNetACDGroup 9 }
|
||
|
|
|
||
|
|
hmNetACDProtectInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..5000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Delay in milliseconds between two protections."
|
||
|
|
DEFVAL { 200 }
|
||
|
|
::= { hmNetACDGroup 11 }
|
||
|
|
|
||
|
|
hmNetACDFaultState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"true(1) if an active address conflict is detected.
|
||
|
|
false(2) if no present address conflict."
|
||
|
|
::= { hmNetACDGroup 13 }
|
||
|
|
|
||
|
|
-- ACD address conflict table
|
||
|
|
hmNetACDAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmNetACDAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains address conflict detection information
|
||
|
|
on the local system known to this agent."
|
||
|
|
::= { hmNetACDGroup 20 }
|
||
|
|
|
||
|
|
hmNetACDAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmNetACDAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP Address conflict detection information about a particular
|
||
|
|
address on the local system kown to this agent.
|
||
|
|
There may be multiple addresses configured on the system.
|
||
|
|
Entries may be created and deleted in this table by the
|
||
|
|
agent."
|
||
|
|
INDEX { hmNetACDTimeMark }
|
||
|
|
::= { hmNetACDAddrTable 1 }
|
||
|
|
|
||
|
|
HmNetACDAddrEntry ::= SEQUENCE {
|
||
|
|
hmNetACDTimeMark TimeFilter,
|
||
|
|
hmNetACDAddrSubtype AddressFamilyNumbers,
|
||
|
|
hmNetACDAddr OCTET STRING,
|
||
|
|
hmNetACDMAC MacAddress,
|
||
|
|
hmNetACDIfId Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmNetACDTimeMark OBJECT-TYPE
|
||
|
|
SYNTAX TimeFilter
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A TimeFilter for this entry. See the TimeFilter textual
|
||
|
|
convention in IETF RFC 2021 and
|
||
|
|
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
|
||
|
|
to see how TimeFilter works."
|
||
|
|
REFERENCE
|
||
|
|
"IETF RFC 2021 section 6"
|
||
|
|
::= { hmNetACDAddrEntry 1 }
|
||
|
|
|
||
|
|
hmNetACDAddrSubtype OBJECT-TYPE
|
||
|
|
SYNTAX AddressFamilyNumbers
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of management address identifier encoding used in
|
||
|
|
the associated 'hmNetACDAddr' object."
|
||
|
|
::= { hmNetACDAddrEntry 3 }
|
||
|
|
|
||
|
|
hmNetACDAddr OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (1..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The string value used to identify the management address
|
||
|
|
component associated with the local system."
|
||
|
|
::= { hmNetACDAddrEntry 5 }
|
||
|
|
|
||
|
|
hmNetACDMAC OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of the device that was detected
|
||
|
|
causing the ip address conflict."
|
||
|
|
::= { hmNetACDAddrEntry 7 }
|
||
|
|
|
||
|
|
hmNetACDIfId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The integer value used to identify the interface number
|
||
|
|
on the local system where the ip address conflict was detected."
|
||
|
|
::= { hmNetACDAddrEntry 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / HiDiscovery-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetHiDiscoveryGroup OBJECT IDENTIFIER ::= { hmNetwork 20 }
|
||
|
|
|
||
|
|
hmNetHiDiscoveryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
readOnly(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the HiDiscovery protocol
|
||
|
|
on this device.
|
||
|
|
This protocol allows a remote host to detect
|
||
|
|
devices without an ip configuration.
|
||
|
|
It also allows the host to set ip parameters,
|
||
|
|
like the ip address, the netmask and
|
||
|
|
the gateway address.
|
||
|
|
If only detection and no configuration is allowed
|
||
|
|
set this object to readOnly(3)."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetHiDiscoveryGroup 1 }
|
||
|
|
|
||
|
|
hmNetHiDiscoveryRelay OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Relay/bridge HiDiscovery frames."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetHiDiscoveryGroup 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / sntp-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetSNTPGroup OBJECT IDENTIFIER ::= { hmNetwork 30 }
|
||
|
|
|
||
|
|
hmNetSNTPStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the Simple Network Time Protocol
|
||
|
|
on this device."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNTPGroup 1 }
|
||
|
|
|
||
|
|
hmNetSNTPServer OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address of an external Time Server."
|
||
|
|
::= { hmNetSNTPGroup 2 }
|
||
|
|
|
||
|
|
hmNetSNTPTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time in seconds since 01/01/1900 UTC."
|
||
|
|
::= { hmNetSNTPGroup 3 }
|
||
|
|
|
||
|
|
hmNetSNTPLocalOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (-1000..1000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The difference between local time and UTC in minutes."
|
||
|
|
DEFVAL { 60 }
|
||
|
|
::= { hmNetSNTPGroup 4 }
|
||
|
|
|
||
|
|
hmNetSNTPServer2 OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP address of a secondary (backup) time server."
|
||
|
|
::= { hmNetSNTPGroup 5 }
|
||
|
|
|
||
|
|
hmNetSNTPSyncInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"SNTP synchronisation interval in seconds."
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { hmNetSNTPGroup 6 }
|
||
|
|
|
||
|
|
hmNetSNTPAcceptBroadcasts OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB variable specifies whether SNTP broadcasts will
|
||
|
|
be allowed to synchronize the local clock.
|
||
|
|
If hmNetSNTPStatus is enabled,
|
||
|
|
this variable will be ignored and broadcasts will not set
|
||
|
|
the local clock."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNTPGroup 7 }
|
||
|
|
|
||
|
|
hmNetSNTPAnycastAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Destination address for SNTP broadcasts.
|
||
|
|
A broadcast, multicast or unicast address may be specified.
|
||
|
|
Setting the address to 0.0.0.0 disables SNTP broadcasts."
|
||
|
|
::= { hmNetSNTPGroup 8 }
|
||
|
|
|
||
|
|
hmNetSNTPAnycastVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4042)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Vlan for anycast mode."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { hmNetSNTPGroup 9 }
|
||
|
|
|
||
|
|
hmNetSNTPAnycastInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interval of SNTP broadcast messages in seconds."
|
||
|
|
DEFVAL { 120 }
|
||
|
|
::= { hmNetSNTPGroup 10 }
|
||
|
|
|
||
|
|
hmNetSNTPOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Operational status of the SNTP sub-system.
|
||
|
|
The value is a bit mask:
|
||
|
|
1 local system clock synchronized
|
||
|
|
2 SNTP loop detected
|
||
|
|
4 generic error
|
||
|
|
8 once synced, client disabled
|
||
|
|
100 server 1 not synchronized
|
||
|
|
200 server 1 bad protocol version
|
||
|
|
400 server 1 not responding
|
||
|
|
10000 server 2 not synchronized
|
||
|
|
20000 server 2 bad protocol version
|
||
|
|
40000 server 2 not responding
|
||
|
|
(Note that all values are hexadecimal.)"
|
||
|
|
::= { hmNetSNTPGroup 11 }
|
||
|
|
|
||
|
|
hmNetSNTPTimeAdjustThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The threshold in milli-seconds whether to decide to set the received
|
||
|
|
SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold
|
||
|
|
value is 0, the received SNTP time will be set directly to the local clock every
|
||
|
|
time a SNTP message is received. If the difference between the local clock time
|
||
|
|
and the received SNTP time is fewer than the hmNetSNTPTimeAdjustThreshold
|
||
|
|
value, the local clock will not be set. If the difference between the local clock time
|
||
|
|
and the received SNTP time is equal or larger than the hmNetSNTPTimeAdjustThreshold
|
||
|
|
value, the local clock will be set."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetSNTPGroup 12 }
|
||
|
|
|
||
|
|
hmNetSNTPOnceAtStartup OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNTPGroup 13 }
|
||
|
|
|
||
|
|
hmNetSNTPServerOnlyIfSync OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP)"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNTPGroup 14 }
|
||
|
|
|
||
|
|
hmNetSNTPServerStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNTPGroup 15 }
|
||
|
|
|
||
|
|
hmNetSNTPClientStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNTPGroup 16 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / NTP group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetNTPGroup OBJECT IDENTIFIER ::= { hmNetwork 31 }
|
||
|
|
|
||
|
|
hmNetNTPOperation OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
off(1),
|
||
|
|
symmetric-active(2),
|
||
|
|
symmetric-passive(3),
|
||
|
|
client(4),
|
||
|
|
server(5),
|
||
|
|
client-server(6),
|
||
|
|
broadcast-client(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Selects operation mode for NTP."
|
||
|
|
DEFVAL { off }
|
||
|
|
::= { hmNetNTPGroup 1 }
|
||
|
|
|
||
|
|
hmNetNTPServer1AddrType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Address type for server 1.
|
||
|
|
Currently, only ipv4 is supported."
|
||
|
|
DEFVAL { ipv4 }
|
||
|
|
::= { hmNetNTPGroup 2 }
|
||
|
|
|
||
|
|
hmNetNTPServer1Address OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The address of the first external time server."
|
||
|
|
::= { hmNetNTPGroup 3 }
|
||
|
|
|
||
|
|
hmNetNTPServer2AddrType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Address type for server 2.
|
||
|
|
Currently, only ipv4 is supported."
|
||
|
|
DEFVAL { ipv4 }
|
||
|
|
::= { hmNetNTPGroup 4 }
|
||
|
|
|
||
|
|
hmNetNTPServer2Address OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The address of the second external time server."
|
||
|
|
::= { hmNetNTPGroup 5 }
|
||
|
|
|
||
|
|
hmNetNTPSyncInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (16..4096)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"NTP synchronisation interval in seconds.
|
||
|
|
NTP will round down the value to a power of 2.
|
||
|
|
The protocol will use an interval between the
|
||
|
|
rounded value and the next power of 2."
|
||
|
|
DEFVAL { 64 }
|
||
|
|
::= { hmNetNTPGroup 6 }
|
||
|
|
|
||
|
|
hmNetNTPAnycastAddrType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Address type for anycasts.
|
||
|
|
Currently, only ipv4 is supported."
|
||
|
|
DEFVAL { ipv4 }
|
||
|
|
::= { hmNetNTPGroup 7 }
|
||
|
|
|
||
|
|
hmNetNTPAnycastAddress OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Destination address for NTP broadcasts.
|
||
|
|
A broadcast, multicast or unicast address may be specified.
|
||
|
|
Setting the address to 0.0.0.0 disables NTP broadcasts."
|
||
|
|
::= { hmNetNTPGroup 8 }
|
||
|
|
|
||
|
|
hmNetNTPAnycastInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (16..4096)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interval of NTP broadcast messages in seconds.
|
||
|
|
NTP will round down the value to a power of 2."
|
||
|
|
DEFVAL { 128 }
|
||
|
|
::= { hmNetNTPGroup 9 }
|
||
|
|
|
||
|
|
hmNetNTPStatusText OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Operational status of the NTP sub-system."
|
||
|
|
::= { hmNetNTPGroup 10 }
|
||
|
|
|
||
|
|
hmNetNTPStatusCode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Operational status of the NTP sub-system.
|
||
|
|
The value is a bit mask:
|
||
|
|
1 local system clock synchronized
|
||
|
|
2 generic error (see hmNetNTPStatusText)
|
||
|
|
100 server 1 not synchronized
|
||
|
|
200 server 1 protocol error
|
||
|
|
400 server 1 not responding
|
||
|
|
800 server 1 synchronization in progress
|
||
|
|
10000 server 2 not synchronized
|
||
|
|
20000 server 2 protocol error
|
||
|
|
40000 server 2 not responding
|
||
|
|
80000 server 2 synchronization in progress
|
||
|
|
(Note that all values are hexadecimal.)"
|
||
|
|
::= { hmNetNTPGroup 11 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / ptp-group (IEEE 1588) --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetPTPGroup OBJECT IDENTIFIER ::= { hmNetwork 40 }
|
||
|
|
hmNetPTPConfiguration OBJECT IDENTIFIER ::= { hmNetPTPGroup 1 }
|
||
|
|
|
||
|
|
hmNetPTPEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable the Precision Time Protocol
|
||
|
|
on this node."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetPTPConfiguration 1 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
init-with-default (2),
|
||
|
|
init-with-nvm (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Initialize the PTP Clock. Value 2: The specification
|
||
|
|
initialization set shall be used. Value 3: The initialization
|
||
|
|
set stored in nonvolatile storage for recovery
|
||
|
|
after a power fail shall be used. Value 1: no action.
|
||
|
|
In GET operations the variable always returns other(1)"
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { hmNetPTPConfiguration 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPClockMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
v1-boundary-clock (1),
|
||
|
|
v1-simple-mode (4),
|
||
|
|
v2-boundary-clock-onestep (5),
|
||
|
|
v2-boundary-clock-twostep (6),
|
||
|
|
v2-transparent-clock (7),
|
||
|
|
v2-simple-mode (9)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This members value shall indicate which clock mode is used.
|
||
|
|
The ptp-mode-boundary-clock mode specifies the mode as described in the IEEE1588 standard.
|
||
|
|
In the 'ptp-mode-simple-ptp' mode the device only accepts PTP sync messages, sets the time
|
||
|
|
directly and no BMC algorithm will run. If the clock mode is changed, PTP will be initialized."
|
||
|
|
DEFVAL { v1-simple-mode }
|
||
|
|
::= { hmNetPTPConfiguration 3 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPSlavePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This members value shall indicate the slave port where this clock is synchronized
|
||
|
|
in the ptp-mode-static-boundary-clock mode.
|
||
|
|
The default value is 0 (i.e. clock is grandmaster)."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTPConfiguration 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPIsSynchronized OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If the clock is synchronized to the current Master this object is set to true.
|
||
|
|
Otherwise it is set to false. The clock sets this object to true, if the offset (ns)
|
||
|
|
to the current Master is less than hmNetPTPSyncLowerBound. The clock sets this object to false,
|
||
|
|
if the offset (ns) to the current Master is bigger than hmNetPTPSyncUpperBound."
|
||
|
|
::= { hmNetPTPConfiguration 5 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPSyncLowerBound OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..999999999)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines when the hmNetPTPIsSynchronized object is set to true.
|
||
|
|
If the absolute value of the offset is smaller than hmNetPTPSyncLowerBound,
|
||
|
|
the hmNetPTPIsSynchronized is set true.
|
||
|
|
The value is interpreted as nanoseconds."
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { hmNetPTPConfiguration 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPSyncUpperBound OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(31..1000000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines when the hmNetPTPIsSynchronized object is set to false.
|
||
|
|
If the absolute value of the offset is bigger than hmNetPTPSyncUpperBound, the hmNetPTPIsSynchronized is set false.
|
||
|
|
The value is interpreted as nanoseconds."
|
||
|
|
DEFVAL { 5000 }
|
||
|
|
::= { hmNetPTPConfiguration 7 }
|
||
|
|
|
||
|
|
hmNetPTPClockStratum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The clock stratum, or stratum number,
|
||
|
|
describes one measure of the quality of a clock. Each clock
|
||
|
|
shall be characterized by a stratum number to be used by
|
||
|
|
the best master clock algorithm as one parameter of clock
|
||
|
|
quality. A clock stratum of 1 is the best,
|
||
|
|
where the default clock stratum is 255."
|
||
|
|
DEFVAL { 255 }
|
||
|
|
::= { hmNetPTPConfiguration 8 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPClockIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (4))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The clock identifier indicates the nature and expected
|
||
|
|
absolute accuracy and epoch of a given clock. Possible
|
||
|
|
values are ATOM, GPS, NTP, HAND, INIT, DFLT. Values with
|
||
|
|
less characters than the maximum allowed length will be
|
||
|
|
padded with zero characters."
|
||
|
|
::= { hmNetPTPConfiguration 9 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPClockVariance OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-32768..32767)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The clock variance reflects the inherent characteristics of the clock.
|
||
|
|
It is an estimate of the local clock from a linear time scale when it
|
||
|
|
is not synchronized to another PTP clock using the PTP protocol."
|
||
|
|
DEFVAL { -16256 }
|
||
|
|
::= { hmNetPTPConfiguration 10 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPPreferredMaster OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A clock may be administratively designated as part of a
|
||
|
|
preferred master clock set. This creates a set of clocks
|
||
|
|
that will be favored over those not so designated in the
|
||
|
|
selection of master clocks within a subdomain. The purpose
|
||
|
|
of this designation is to allow users to specify a clock
|
||
|
|
that will remain master in the presence of disconnection
|
||
|
|
or connection of other clocks."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmNetPTPConfiguration 11 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPSyncInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
sec-1 (1),
|
||
|
|
sec-2 (2),
|
||
|
|
sec-8 (8),
|
||
|
|
sec-16 (16),
|
||
|
|
sec-64 (64)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The sync interval shall be the interval in seconds between
|
||
|
|
successive Sync messages issued by master clocks.
|
||
|
|
It shall have the same value for all clocks in a subdomain.
|
||
|
|
The value of sync interval is a compromise between the
|
||
|
|
inherent stability of the clocks, the responsiveness of the
|
||
|
|
clocks in a subdomain to change, and the communication load
|
||
|
|
imposed by PTP. Allowed values are 1,2,8,16 and 64.
|
||
|
|
Changes are applied after the initialization with the init
|
||
|
|
key init-with-nvm or after reboot if the configuration was saved."
|
||
|
|
DEFVAL { sec-2 }
|
||
|
|
::= { hmNetPTPConfiguration 12 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPSubdomainName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each subdomain shall be characterized by a name recognized
|
||
|
|
by all PTP clocks in the subdomain as the basis for sending
|
||
|
|
and receiving PTP communications. Changes are applied after
|
||
|
|
the initialization with the init key init-with-nvm or afer
|
||
|
|
reboot if the configuration was saved. The values of the
|
||
|
|
octets for the subdomain name may be chosen from the set
|
||
|
|
consisting of the values of the printable ASCII characters
|
||
|
|
starting with hex value 0x21 (!) up to and including hex
|
||
|
|
value 0x7E (~)."
|
||
|
|
::= { hmNetPTPConfiguration 13 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPOffsetFromMasterNanoSecs OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Current offset between its parent and this node in nanoseconds.
|
||
|
|
Values greater than 1 second or less than -1 second are
|
||
|
|
indicated by the maximum or minimum INTEGER values."
|
||
|
|
::= { hmNetPTPConfiguration 14 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPAbsMaxOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This members value shall indicate the absolute value for the maximum offset between its parent and this node.
|
||
|
|
The value is set to zero if the offset is the first time smaller than hmNetPTPSyncLowerBound.
|
||
|
|
Offsets bigger than +/-1 second is indicated by the maximum value"
|
||
|
|
::= { hmNetPTPConfiguration 15 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPOneWayDelayNanoSecs OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Current one_way_delay between its parent and this node in nanoseconds.
|
||
|
|
Values greater than 1 second or less than -1 second are
|
||
|
|
indicated by the maximum or minimum INTEGER values."
|
||
|
|
::= { hmNetPTPConfiguration 16 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPTimeSeconds OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This members value shall indicate PTP time in seconds since 1.1.1970."
|
||
|
|
::= { hmNetPTPConfiguration 17 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPObservedDrift OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Relative rate (frequency or drift) between its parent and this node in nanoseconds.
|
||
|
|
Values greater than 1 second or less than -1 second are
|
||
|
|
indicated by the maximum or minimum INTEGER values."
|
||
|
|
::= { hmNetPTPConfiguration 18 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPPiIntegral OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..50000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A digital PI servo has the following difference equation
|
||
|
|
y(k) = y(k-1) + (Kp + Ki* T )* x(k) + Kp * x(k-1).
|
||
|
|
This object specifies the Ki* 100000 term (integral part). Kp is 0.5.
|
||
|
|
The default value of this object is 6250 that is Ki=1/16."
|
||
|
|
DEFVAL { 6250 }
|
||
|
|
::= { hmNetPTPConfiguration 19 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPParentUUID OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The UUID of its Parent. For Ethernet this is the MAC
|
||
|
|
address of the management agent."
|
||
|
|
::= { hmNetPTPConfiguration 20 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPGrandmasterUUID OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The UUID of its Grandmaster. For Ethernet this is the MAC
|
||
|
|
address of the management agent."
|
||
|
|
::= { hmNetPTPConfiguration 21 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPCurrentUTCOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"UTC time differs from the TAI time by a constant offset.
|
||
|
|
This offset is modified on occasion by adding or subtracting
|
||
|
|
leap seconds. The current number of leap seconds is represented
|
||
|
|
in PTP by the value of hmNetPTPCurrentUTCOffset."
|
||
|
|
::= { hmNetPTPConfiguration 22 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPleap59 OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When TRUE the last minute of the current day will contain 59 seconds."
|
||
|
|
::= { hmNetPTPConfiguration 23 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPleap61 OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When TRUE the last minute of the current day will contain 61 seconds."
|
||
|
|
::= { hmNetPTPConfiguration 24 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPStepsRemoved OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This members value shall be the number of communication paths traversed between the local clock and
|
||
|
|
the grandmaster clock. For example, steps_removed in a slave clock on the same PTP communication path as
|
||
|
|
the grandmaster clock will have a value of 1, indicating that a single path was traversed."
|
||
|
|
::= { hmNetPTPConfiguration 25 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPEpochNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The PTP epoch began at 0 hours on 1 January 1970. Times measured
|
||
|
|
since this epoch are designated in this standard as PTP Seconds.
|
||
|
|
When the epoch is the PTP epoch, the value of the epoch number
|
||
|
|
shall be the current number of times the 32-bit seconds clock
|
||
|
|
has rolled over since the PTP epoch."
|
||
|
|
::= { hmNetPTPConfiguration 26}
|
||
|
|
|
||
|
|
hmNetPTPStaticDrift OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (-500000000..500000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Relative rate (frequency or drift) between a reference clock and this node
|
||
|
|
in nanoseconds per second (ns/s). This value is only applied if no port is in
|
||
|
|
slave state."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTPConfiguration 27 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTPPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmNetPTPPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each PTP port of
|
||
|
|
the switch."
|
||
|
|
::= { hmNetPTPGroup 2 }
|
||
|
|
|
||
|
|
hmNetPTPPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmNetPTPPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Entry for one port."
|
||
|
|
INDEX { hmNetPTPPortID }
|
||
|
|
::= { hmNetPTPPortTable 1 }
|
||
|
|
|
||
|
|
HmNetPTPPortEntry ::= SEQUENCE {
|
||
|
|
hmNetPTPPortID Integer32,
|
||
|
|
hmNetPTPPortState INTEGER,
|
||
|
|
hmNetPTPPortBurstEnable INTEGER,
|
||
|
|
hmNetPTPPortEnable INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmNetPTPPortID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index to identify a port of the switch unit.
|
||
|
|
This value is never greater than hmSysGroupCapacity."
|
||
|
|
::= { hmNetPTPPortEntry 1 }
|
||
|
|
|
||
|
|
hmNetPTPPortState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
initializing (1),
|
||
|
|
faulty (2),
|
||
|
|
disabled (3),
|
||
|
|
listening (4),
|
||
|
|
pre-master (5),
|
||
|
|
master (6),
|
||
|
|
passive (7),
|
||
|
|
uncalibrated (8),
|
||
|
|
slave (9)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"State of the PTP port intance."
|
||
|
|
::= { hmNetPTPPortEntry 2 }
|
||
|
|
|
||
|
|
hmNetPTPPortBurstEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the burst enable flag."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmNetPTPPortEntry 3 }
|
||
|
|
|
||
|
|
hmNetPTPPortEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The respective PTP Port of the Boundary Clock can be set to true (enabled) or set to false (disabled).
|
||
|
|
If the port is disabled no PTP packets will be processed for the respective port."
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { hmNetPTPPortEntry 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / ptp2-group (IEEE 1588) --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetPTP2Group OBJECT IDENTIFIER ::= { hmNetwork 41 }
|
||
|
|
hmNetPTP2Configuration OBJECT IDENTIFIER ::= { hmNetPTP2Group 1 }
|
||
|
|
|
||
|
|
hmNetPTP2TwoStepClock OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 1 }
|
||
|
|
|
||
|
|
hmNetPTP2ClockIdentity OBJECT-TYPE
|
||
|
|
SYNTAX PTPClockIdentity
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 2 }
|
||
|
|
|
||
|
|
hmNetPTP2Priority1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 128 }
|
||
|
|
::= { hmNetPTP2Configuration 3 }
|
||
|
|
|
||
|
|
hmNetPTP2Priority2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 128 }
|
||
|
|
::= { hmNetPTP2Configuration 4 }
|
||
|
|
|
||
|
|
hmNetPTP2DomainNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTP2Configuration 5 }
|
||
|
|
|
||
|
|
hmNetPTP2StepsRemoved OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 6 }
|
||
|
|
|
||
|
|
hmNetPTP2OffsetFromMaster OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 7 }
|
||
|
|
|
||
|
|
hmNetPTP2MeanPathDelay OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 8 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTP2ParentPortIdentity OBJECT-TYPE
|
||
|
|
SYNTAX PTPPortIdentity
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 9 }
|
||
|
|
|
||
|
|
hmNetPTP2ParentStats OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 10 }
|
||
|
|
|
||
|
|
hmNetPTP2ObservedParentOffsetScaledLogVariance OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 11 }
|
||
|
|
|
||
|
|
|
||
|
|
hmNetPTP2ObservedParentClockPhaseChangeRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 12 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterIdentity OBJECT-TYPE
|
||
|
|
SYNTAX PTPClockIdentity
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 13 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterClockQuality OBJECT-TYPE
|
||
|
|
SYNTAX PTPClockQuality
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 14 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterPriority1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 15 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterPriority2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 16 }
|
||
|
|
|
||
|
|
hmNetPTP2CurrentUtcOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 17 }
|
||
|
|
|
||
|
|
hmNetPTP2CurrentUtcOffsetValid OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 18 }
|
||
|
|
|
||
|
|
hmNetPTP2Leap59 OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 19 }
|
||
|
|
|
||
|
|
hmNetPTP2Leap61 OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 20 }
|
||
|
|
|
||
|
|
hmNetPTP2TimeTraceable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 21 }
|
||
|
|
|
||
|
|
hmNetPTP2FrequencyTraceable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 22 }
|
||
|
|
|
||
|
|
hmNetPTP2PtpTimescale OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 23 }
|
||
|
|
|
||
|
|
hmNetPTP2TimeSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
atomicClock(16), -- 10H
|
||
|
|
gps(32), -- 20H
|
||
|
|
terrestrialRadio(48), -- 30H
|
||
|
|
ptp(64), -- 40H
|
||
|
|
ntp(80), --50H
|
||
|
|
handSet(96), --60H
|
||
|
|
other(144), --90H
|
||
|
|
internalOscillator(160) --A0H
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 24 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterClockClass OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 25 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterClockAccuracy OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
within25ns(32), -- 20H
|
||
|
|
within100ns(33), -- 21H
|
||
|
|
within250ns(34), -- 22H
|
||
|
|
within1000ns(35), -- 23H
|
||
|
|
within2500ns(36), -- 24H
|
||
|
|
within10us(37), -- 25H
|
||
|
|
within25us(38), -- 26H
|
||
|
|
within100us(39), -- 27H
|
||
|
|
within250us(40), -- 28H
|
||
|
|
within1000us(41), -- 29H
|
||
|
|
within2500us(42), -- 2AH
|
||
|
|
within10ms(43), -- 2BH
|
||
|
|
within25ms(44), -- 2CH
|
||
|
|
within100ms(45), -- 2DH
|
||
|
|
within250ms(46), -- 2EH
|
||
|
|
within1s(47), -- 2FH
|
||
|
|
within10s(48), -- 30H
|
||
|
|
beyond10s(49), -- 31H
|
||
|
|
unknown(254) -- FEH
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 26 }
|
||
|
|
|
||
|
|
hmNetPTP2GrandmasterClockVariance OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2Configuration 27 }
|
||
|
|
|
||
|
|
hmNetPTP2PortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmNetPTP2PortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each PTP2 port of
|
||
|
|
the switch."
|
||
|
|
::= { hmNetPTP2Group 2 }
|
||
|
|
|
||
|
|
hmNetPTP2PortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmNetPTP2PortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Entry for one port."
|
||
|
|
INDEX { hmNetPTPPortID }
|
||
|
|
::= { hmNetPTP2PortTable 1 }
|
||
|
|
|
||
|
|
HmNetPTP2PortEntry ::= SEQUENCE {
|
||
|
|
hmNetPTP2PortEnable TruthValue,
|
||
|
|
hmNetPTP2PortState INTEGER,
|
||
|
|
hmNetPTP2LogDelayReqInterval Integer32,
|
||
|
|
hmNetPTP2PeerMeanPathDelay PTPTimeInterval,
|
||
|
|
hmNetPTP2LogAnnounceInterval INTEGER,
|
||
|
|
hmNetPTP2AnnounceReceiptTimeout INTEGER,
|
||
|
|
hmNetPTP2LogSyncInterval INTEGER,
|
||
|
|
hmNetPTP2DelayMechanism INTEGER,
|
||
|
|
hmNetPTP2LogPdelayReqInterval INTEGER,
|
||
|
|
hmNetPTP2VersionNumber INTEGER,
|
||
|
|
hmNetPTP2NetworkProtocol INTEGER,
|
||
|
|
hmNetPTP2V1Compatibility INTEGER,
|
||
|
|
hmNetPTP2DelayAsymmetry PTPTimeInterval,
|
||
|
|
hmNetPTP2PortCapability BITS,
|
||
|
|
hmNetPTP2VlanID Integer32,
|
||
|
|
hmNetPTP2VlanPriority Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmNetPTP2PortEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { hmNetPTP2PortEntry 1 }
|
||
|
|
|
||
|
|
hmNetPTP2PortState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
initializing (1),
|
||
|
|
faulty (2),
|
||
|
|
disabled (3),
|
||
|
|
listening (4),
|
||
|
|
pre-master (5),
|
||
|
|
master (6),
|
||
|
|
passive (7),
|
||
|
|
uncalibrated (8),
|
||
|
|
slave (9)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"State of the PTP2 port intance."
|
||
|
|
::= { hmNetPTP2PortEntry 2 }
|
||
|
|
|
||
|
|
hmNetPTP2LogDelayReqInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2PortEntry 3 }
|
||
|
|
|
||
|
|
hmNetPTP2PeerMeanPathDelay OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2PortEntry 4 }
|
||
|
|
|
||
|
|
hmNetPTP2LogAnnounceInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
sec-1 (0),
|
||
|
|
sec-2 (1),
|
||
|
|
sec-4 (2),
|
||
|
|
sec-8 (3),
|
||
|
|
sec-16 (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { hmNetPTP2PortEntry 5 }
|
||
|
|
|
||
|
|
hmNetPTP2AnnounceReceiptTimeout OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (2..10)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { hmNetPTP2PortEntry 6 }
|
||
|
|
|
||
|
|
hmNetPTP2LogSyncInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
msec-250 (-2),
|
||
|
|
msec-500 (-1),
|
||
|
|
sec-1 (0),
|
||
|
|
sec-2 (1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTP2PortEntry 7 }
|
||
|
|
|
||
|
|
hmNetPTP2DelayMechanism OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
e2e(1),
|
||
|
|
p2p(2),
|
||
|
|
disabled(254) -- FEH
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { e2e }
|
||
|
|
::= { hmNetPTP2PortEntry 8 }
|
||
|
|
|
||
|
|
hmNetPTP2LogPdelayReqInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
sec-1 (0),
|
||
|
|
sec-2 (1),
|
||
|
|
sec-4 (2),
|
||
|
|
sec-8 (3),
|
||
|
|
sec-16 (4),
|
||
|
|
sec-32 (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTP2PortEntry 9 }
|
||
|
|
|
||
|
|
hmNetPTP2VersionNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ptpVersion1 (1),
|
||
|
|
ptpVersion2 (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { ptpVersion2 }
|
||
|
|
::= { hmNetPTP2PortEntry 10 }
|
||
|
|
|
||
|
|
hmNetPTP2NetworkProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
udpIpv4 (1),
|
||
|
|
ieee8023 (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { udpIpv4 }
|
||
|
|
::= { hmNetPTP2PortEntry 11 }
|
||
|
|
|
||
|
|
hmNetPTP2V1Compatibility OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on (1),
|
||
|
|
off (2),
|
||
|
|
auto (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { auto }
|
||
|
|
::= { hmNetPTP2PortEntry 12 }
|
||
|
|
|
||
|
|
hmNetPTP2DelayAsymmetry OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { '0000000000000000'h }
|
||
|
|
::= { hmNetPTP2PortEntry 13 }
|
||
|
|
|
||
|
|
hmNetPTP2PortCapability OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
reserved(0),
|
||
|
|
one-step(1),
|
||
|
|
e2e-delay(2),
|
||
|
|
p2p-delay(3),
|
||
|
|
ptp2Ieee8023(4),
|
||
|
|
ptp2UdpIpv4(5),
|
||
|
|
ptp2UdpIpv6(6),
|
||
|
|
asymmCorrection(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object shows the capability of the ptp port."
|
||
|
|
::= { hmNetPTP2PortEntry 14 }
|
||
|
|
|
||
|
|
hmNetPTP2VlanID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..4042)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"VLAN in which PTP packets are send. With a value of -1 all packets are send untagged"
|
||
|
|
DEFVAL { -1 }
|
||
|
|
::= { hmNetPTP2PortEntry 15 }
|
||
|
|
|
||
|
|
hmNetPTP2VlanPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"VLAN priority of tagged ptp packets"
|
||
|
|
DEFVAL { 4 }
|
||
|
|
::= { hmNetPTP2PortEntry 16 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetPTP2TCConfiguration / Transparent Clock configuration --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetPTP2TCGroup OBJECT IDENTIFIER ::= { hmNetwork 42 }
|
||
|
|
hmNetPTP2TCConfiguration OBJECT IDENTIFIER ::= { hmNetPTP2TCGroup 1 }
|
||
|
|
|
||
|
|
hmNetPTP2TCClockIdentity OBJECT-TYPE
|
||
|
|
SYNTAX PTPClockIdentity
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2TCConfiguration 1 }
|
||
|
|
|
||
|
|
hmNetPTP2TCDelayMechanism OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
e2e(1),
|
||
|
|
p2p(2),
|
||
|
|
e2e-optimized(3),
|
||
|
|
disabled(254) -- FEH
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { e2e }
|
||
|
|
::= { hmNetPTP2TCConfiguration 2 }
|
||
|
|
|
||
|
|
hmNetPTP2TCPrimaryDomain OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTP2TCConfiguration 3 }
|
||
|
|
|
||
|
|
hmNetPTP2TCSyntonized OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2TCConfiguration 4 }
|
||
|
|
|
||
|
|
hmNetPTP2TCNetworkProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
udpIpv4 (1),
|
||
|
|
ieee8023 (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { udpIpv4 }
|
||
|
|
::= { hmNetPTP2TCConfiguration 5 }
|
||
|
|
|
||
|
|
hmNetPTP2TCCurrentMaster OBJECT-TYPE
|
||
|
|
SYNTAX PTPPortIdentity
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2TCConfiguration 6 }
|
||
|
|
|
||
|
|
hmNetPTP2TCManagement OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { hmNetPTP2TCConfiguration 7 }
|
||
|
|
|
||
|
|
hmNetPTP2TCMultiDomainMode OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmNetPTP2TCConfiguration 8 }
|
||
|
|
|
||
|
|
hmNetPTP2TCSyncLocalClock OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable synchronisation of the local clock. This is only valid if syntonization is enabled"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmNetPTP2TCConfiguration 9 }
|
||
|
|
|
||
|
|
hmNetPTP2TCVlanID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..4042)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"VLAN in which PTP packets are send. With a value of -1 all packets are send untagged"
|
||
|
|
DEFVAL { -1 }
|
||
|
|
::= { hmNetPTP2TCConfiguration 10 }
|
||
|
|
|
||
|
|
hmNetPTP2TCVlanPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"VLAN priority of tagged ptp packets"
|
||
|
|
DEFVAL { 4 }
|
||
|
|
::= { hmNetPTP2TCConfiguration 11 }
|
||
|
|
|
||
|
|
hmNetPTP2TCPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmNetPTP2TCPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each PTP2 TC port of
|
||
|
|
the switch."
|
||
|
|
::= { hmNetPTP2TCGroup 2 }
|
||
|
|
|
||
|
|
hmNetPTP2TCPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmNetPTP2TCPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Entry for one port."
|
||
|
|
INDEX { hmNetPTPPortID }
|
||
|
|
::= { hmNetPTP2TCPortTable 1 }
|
||
|
|
|
||
|
|
HmNetPTP2TCPortEntry ::= SEQUENCE {
|
||
|
|
hmNetPTP2TCPortEnable TruthValue,
|
||
|
|
hmNetPTP2TCLogPdelayReqInterval INTEGER,
|
||
|
|
hmNetPTP2TCFaulty TruthValue,
|
||
|
|
hmNetPTP2TCPeerMeanPathDelay PTPTimeInterval,
|
||
|
|
hmNetPTP2TCDelayAsymmetry PTPTimeInterval
|
||
|
|
}
|
||
|
|
|
||
|
|
hmNetPTP2TCPortEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { hmNetPTP2TCPortEntry 1 }
|
||
|
|
|
||
|
|
hmNetPTP2TCLogPdelayReqInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
sec-1 (0),
|
||
|
|
sec-2 (1),
|
||
|
|
sec-4 (2),
|
||
|
|
sec-8 (3),
|
||
|
|
sec-16 (4),
|
||
|
|
sec-32 (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmNetPTP2TCPortEntry 2 }
|
||
|
|
|
||
|
|
hmNetPTP2TCFaulty OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2TCPortEntry 3 }
|
||
|
|
|
||
|
|
hmNetPTP2TCPeerMeanPathDelay OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { hmNetPTP2TCPortEntry 4 }
|
||
|
|
|
||
|
|
hmNetPTP2TCDelayAsymmetry OBJECT-TYPE
|
||
|
|
SYNTAX PTPTimeInterval
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
DEFVAL { '0000000000000000'h }
|
||
|
|
::= { hmNetPTP2TCPortEntry 5 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / SNMP-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetSNMPGroup OBJECT IDENTIFIER ::= { hmNetwork 50 }
|
||
|
|
|
||
|
|
hmNetSNMPv1Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMP Version 1 protocol."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNMPGroup 1 }
|
||
|
|
|
||
|
|
hmNetSNMPv2Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMP Version 2 protocol."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNMPGroup 2 }
|
||
|
|
|
||
|
|
hmNetSNMPv3Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMP Version 3 protocol."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNMPGroup 3 }
|
||
|
|
|
||
|
|
hmNetSNMPAccessStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
readOnly(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMP protocol access
|
||
|
|
on this device.
|
||
|
|
If only read access is allowed set this object
|
||
|
|
to readOnly(3)."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNMPGroup 4 }
|
||
|
|
|
||
|
|
hmNetSNMPSynchronizeV1V3Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the synchronization between
|
||
|
|
the SNMPv1 community and the SNMPv3 password.
|
||
|
|
If enabled the first read-write community in hmAuthCommTable
|
||
|
|
is used for the SNMPv3 admin password.
|
||
|
|
This is the same password that is used in the user- and
|
||
|
|
webinterface.
|
||
|
|
Further, if enabled the first read-only community in
|
||
|
|
hmAuthCommTable is used for the SNMPv3 user password."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmNetSNMPGroup 5 }
|
||
|
|
|
||
|
|
hmNetSNMPPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the snmp server.
|
||
|
|
To activate the port number the device
|
||
|
|
has to be restarted."
|
||
|
|
DEFVAL { 161 }
|
||
|
|
::= { hmNetSNMPGroup 6 }
|
||
|
|
|
||
|
|
hmNetSNMPRadiusAuthenticate OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables authentication of SNMPv3
|
||
|
|
users via RADIUS server"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNMPGroup 7 }
|
||
|
|
|
||
|
|
hmNetSNMPv3EncryptionReadWriteStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMPv3 admin Data Encryption."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNMPGroup 8 }
|
||
|
|
|
||
|
|
hmNetSNMPv3EncryptionReadOnlyStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the SNMPv3 user Data Encryption."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmNetSNMPGroup 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmNetwork / GPS-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetGPSGroup OBJECT IDENTIFIER ::= { hmNetwork 60 }
|
||
|
|
|
||
|
|
hmNetGPSIsAvailable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates if a GPS module is available."
|
||
|
|
::= { hmNetGPSGroup 1 }
|
||
|
|
|
||
|
|
hmNetGPSIsSynchronized OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates if the GPS module is synchronized to the GPS signal."
|
||
|
|
::= { hmNetGPSGroup 2 }
|
||
|
|
|
||
|
|
hmNetGPSMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
gpsIn(1),
|
||
|
|
gpsOut(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the mode of the GPS module. If hmNetGPSMode is gpsIn(1), the GPS
|
||
|
|
module reads the signal from a GPS receiver in the format given in
|
||
|
|
hmNetGPSTimeStringFormat. If the mode is gpsOut(2), the GPS module
|
||
|
|
sends out a signal in the format given in hmNetGPSTimeStringFormat."
|
||
|
|
DEFVAL { gpsIn }
|
||
|
|
::= { hmNetGPSGroup 3 }
|
||
|
|
|
||
|
|
hmNetGPSTimeStringFormat OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
meinberg(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the GPS time string formats which a GPS module can read or write."
|
||
|
|
DEFVAL { meinberg }
|
||
|
|
::= { hmNetGPSGroup 4 }
|
||
|
|
|
||
|
|
-- hmNetwork /hmRestrictedMgtAccessGroup
|
||
|
|
|
||
|
|
|
||
|
|
hmRestrictedMgtAccessGroup OBJECT IDENTIFIER ::= { hmNetwork 70 }
|
||
|
|
|
||
|
|
|
||
|
|
hmRMAOperation OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enables/disables Management Access globally"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { hmRestrictedMgtAccessGroup 1 }
|
||
|
|
|
||
|
|
HmRMAEntry ::= SEQUENCE {
|
||
|
|
hmRMAIndex INTEGER,
|
||
|
|
hmRMARowStatus RowStatus,
|
||
|
|
hmRMAIpAddr IpAddress,
|
||
|
|
hmRMANetMask IpAddress,
|
||
|
|
hmRMASrvHttp INTEGER,
|
||
|
|
hmRMASrvSnmp INTEGER,
|
||
|
|
hmRMASrvTelnet INTEGER,
|
||
|
|
hmRMASrvSsh INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmRMATable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmRMAEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A list of Management Access Entries (Rules) to increase security "
|
||
|
|
::= { hmRestrictedMgtAccessGroup 2 }
|
||
|
|
|
||
|
|
hmRMAEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmRMAEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry contains a rule for the Management Access."
|
||
|
|
INDEX { hmRMAIndex }
|
||
|
|
::= { hmRMATable 1 }
|
||
|
|
|
||
|
|
hmRMAIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (1..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The unique index used for each row in the RMA Table"
|
||
|
|
::= { hmRMAEntry 1 }
|
||
|
|
|
||
|
|
hmRMARowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Describes the status of a row in this table if it is active or not available ..."
|
||
|
|
::= { hmRMAEntry 2 }
|
||
|
|
|
||
|
|
hmRMAIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Allowed IP address"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { hmRMAEntry 3 }
|
||
|
|
|
||
|
|
hmRMANetMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Network Mask"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { hmRMAEntry 4 }
|
||
|
|
|
||
|
|
hmRMASrvHttp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enables/disables HHTP access"
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmRMAEntry 5 }
|
||
|
|
|
||
|
|
hmRMASrvSnmp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enables/disbales SNMP access"
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmRMAEntry 6 }
|
||
|
|
|
||
|
|
hmRMASrvTelnet OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enables/disables Telnet access"
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmRMAEntry 7 }
|
||
|
|
|
||
|
|
hmRMASrvSsh OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enables/disables SSH access"
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { hmRMAEntry 8 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- agent / File System Table --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmFSTable OBJECT IDENTIFIER ::= { hmAgent 4 }
|
||
|
|
|
||
|
|
hmFSUpdFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..70))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Full specified filename of the update file
|
||
|
|
e.g. tftp://192.9.200.1/upd/bootrom.v3 ."
|
||
|
|
::= { hmFSTable 1 }
|
||
|
|
|
||
|
|
hmFSConfFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..70))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Full specified name of the configuration file
|
||
|
|
e.g. tftp://192.9.200.1/cfg/config1.sav ."
|
||
|
|
::= { hmFSTable 2 }
|
||
|
|
|
||
|
|
hmFSLogFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..70))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Local or full specified url of the log file.
|
||
|
|
If value is local, the log will be written to the flash.
|
||
|
|
e.g. tftp://192.9.200.1/log/log300599.log or local."
|
||
|
|
::= { hmFSTable 3 }
|
||
|
|
|
||
|
|
hmFSUserName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..10))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"login name for the used file transport protocol."
|
||
|
|
::= { hmFSTable 4 }
|
||
|
|
|
||
|
|
hmFSTPPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..10))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"password for the used file transport protocol."
|
||
|
|
::= { hmFSTable 5 }
|
||
|
|
|
||
|
|
hmFSAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
update (2),
|
||
|
|
config-load (3),
|
||
|
|
config-save (4),
|
||
|
|
config-load-remote (5),
|
||
|
|
config-save-remote (6),
|
||
|
|
log-save (7),
|
||
|
|
config-load-default (8),
|
||
|
|
set-to-factory (9),
|
||
|
|
log-clear (10),
|
||
|
|
gbl-update (12),
|
||
|
|
config-load-backup (13),
|
||
|
|
config-remote-and-save (15),
|
||
|
|
updateBootcode (16),
|
||
|
|
toggleImage (20),
|
||
|
|
config-save-remote-script (21)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object, when read, always returns a value of other (1).
|
||
|
|
When set to update (2), the updatefile specified by
|
||
|
|
hmFSUpdFileName will be loaded. config-load (3) will load the
|
||
|
|
configuration stored in the local flash. config-save (4) will
|
||
|
|
write the present configuration to the flash.
|
||
|
|
config-load-remote (5) will load the configuration stored in
|
||
|
|
a file specified by hmFSConfigFileName (which may be in binary
|
||
|
|
or script format).
|
||
|
|
config-save-remote (6) will save the present configuration in a
|
||
|
|
file specified by hmFSConfigFileName.
|
||
|
|
log-save (7) will save the local logfile to a file specified
|
||
|
|
with hmFSLogFileName. config-load-default (8) will restore the
|
||
|
|
default settings and set-to-factory (9) will apply the factory
|
||
|
|
settings to the system and save the configuration to flash.
|
||
|
|
log-clear (10) will clear the logfile of the agent.
|
||
|
|
gbl-update (12) will perform a software update of the whole chassis.
|
||
|
|
config-load-backup (13) loads an automatically saved backup configuration
|
||
|
|
config-remote-and-save (15) loads a configuration via tftp and saves it
|
||
|
|
to the flash. toggleImage (20) switches between main and backup
|
||
|
|
software image to be active (so it will be loaded after the next coldstart).
|
||
|
|
config-save-remote-script (21) saves the current configuration in script
|
||
|
|
format to the file specified by hmFSConfigFileName.
|
||
|
|
Any other value results in a badValue status code."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { hmFSTable 6 }
|
||
|
|
|
||
|
|
hmFSActionResult OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other (1),
|
||
|
|
pending (2),
|
||
|
|
ok (3),
|
||
|
|
failed(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Result of the last activated action."
|
||
|
|
::= { hmFSTable 8 }
|
||
|
|
|
||
|
|
hmFSBootConfiguration OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default (1),
|
||
|
|
local (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"By setting this MIB variable the user can control which
|
||
|
|
configuration should be read during system initialization:
|
||
|
|
default(1) : boot with factory settings
|
||
|
|
local(2) : boot with locally stored configuration"
|
||
|
|
DEFVAL { local }
|
||
|
|
::= { hmFSTable 9 }
|
||
|
|
|
||
|
|
hmFSRunningConfiguration OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
boot (1),
|
||
|
|
local (2),
|
||
|
|
remote (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"By setting this MIB variable the user can control which
|
||
|
|
configuration should be read after switch initialization:
|
||
|
|
boot(1) : the one which is selected
|
||
|
|
by hmFSBootConfiguration
|
||
|
|
local(2) : boot with locally stored configuration
|
||
|
|
remote(3) : use the remotely stored configuration
|
||
|
|
according to hmFSConfFileName"
|
||
|
|
DEFVAL { boot }
|
||
|
|
::= { hmFSTable 10 }
|
||
|
|
|
||
|
|
hmFSLastMessage OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"error message of the last hmFSAction performed. If there was no error
|
||
|
|
encountered, the value of this variable will be 'OK'"
|
||
|
|
::= { hmFSTable 11 }
|
||
|
|
|
||
|
|
hmConfigurationStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok(1),
|
||
|
|
notInSync(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of the local configuration.
|
||
|
|
ok(1): Local and running configuration match.
|
||
|
|
notInSync(2): Local and running configuration don't match,
|
||
|
|
configuration has not yet been saved."
|
||
|
|
::= { hmFSTable 12 }
|
||
|
|
|
||
|
|
hmFSFileTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmFSFileEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a directory of the internal file system"
|
||
|
|
::= { hmFSTable 100 }
|
||
|
|
|
||
|
|
hmFSFileEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmFSFileEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmFSFileTable."
|
||
|
|
INDEX { hmFSFileID }
|
||
|
|
::= { hmFSFileTable 1 }
|
||
|
|
|
||
|
|
HmFSFileEntry ::= SEQUENCE {
|
||
|
|
hmFSFileID Integer32,
|
||
|
|
hmFSFileName DisplayString,
|
||
|
|
hmFSFileSize Integer32,
|
||
|
|
hmFSFileDate TimeTicks
|
||
|
|
}
|
||
|
|
|
||
|
|
hmFSFileID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated file"
|
||
|
|
::= { hmFSFileEntry 1 }
|
||
|
|
|
||
|
|
hmFSFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"file name excluding path"
|
||
|
|
::= { hmFSFileEntry 2 }
|
||
|
|
|
||
|
|
hmFSFileSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"file size in bytes"
|
||
|
|
::= { hmFSFileEntry 3 }
|
||
|
|
|
||
|
|
hmFSFileDate OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"date in UNIX format (seconds since 1 jan 1970)"
|
||
|
|
::= { hmFSFileEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
hmAutoconfigGroup OBJECT IDENTIFIER ::= { hmFSTable 200 }
|
||
|
|
|
||
|
|
hmAutoconfigAdapterStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
notPresent(1),
|
||
|
|
removed(2),
|
||
|
|
ok(3),
|
||
|
|
notInSync(4),
|
||
|
|
outOfMemory(5),
|
||
|
|
wrongMachine(6),
|
||
|
|
checksumErr(7),
|
||
|
|
genericErr(8),
|
||
|
|
autodisabled(9)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of the AutoConfiguration Adapter.
|
||
|
|
notPresent(1): AutoConfiguration Adapter has not been detected.
|
||
|
|
removed(2): Configuration was loaded from adapter, but adapter
|
||
|
|
was removed in running mode of the agent.
|
||
|
|
ok(3): Configuration of adapter and switch match.
|
||
|
|
notInSync(4): Configuration of adapter and switch don't match,
|
||
|
|
e.g. configuration has not yet been written into
|
||
|
|
the adapter.
|
||
|
|
outOfMemory(5): Configuration is too large for the adapter.
|
||
|
|
wrongMachine(6): Adapter contains configuration which cannot
|
||
|
|
be loaded into this machine because it was
|
||
|
|
created by a different type of switch.
|
||
|
|
checksumErr(7): Data in adapter fails consistency check.
|
||
|
|
genericErr(8): Any other failure, e.g. hardware malfunction.
|
||
|
|
autodisabled(9): USB port has been disabled for safety reasons."
|
||
|
|
::= { hmAutoconfigGroup 1 }
|
||
|
|
|
||
|
|
hmAutoconfigAdapterSerialNum OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The serial number provided by vendor (ASCII). "
|
||
|
|
::= { hmAutoconfigGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Configuration watchdog
|
||
|
|
--
|
||
|
|
|
||
|
|
hmConfigWatchdogGroup OBJECT IDENTIFIER ::= { hmFSTable 201 }
|
||
|
|
|
||
|
|
hmConfigWatchdogAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Administrative status of the configuration watchdog.
|
||
|
|
enable(1): start/trigger the watchdog timer
|
||
|
|
disable(2): turn off the watchdog
|
||
|
|
|
||
|
|
This feature provides recovery from situations where the
|
||
|
|
switch cannot be reached by the management station anymore.
|
||
|
|
|
||
|
|
Whenever this variable is set to enable(1), the value of
|
||
|
|
hmConfigWatchdogTimeInterval is loaded into the watchdog timer.
|
||
|
|
This timer must be triggered before hmConfigWatchdogTimerValue
|
||
|
|
reaches 0. If the watchdog timer expires, the last saved
|
||
|
|
configuration of the switch will be restored.
|
||
|
|
|
||
|
|
The watchdog is triggered with MIB read and write accesses"
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmConfigWatchdogGroup 1 }
|
||
|
|
|
||
|
|
hmConfigWatchdogOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Operational status of the configuration watchdog.
|
||
|
|
enable(1): watchdog up and running
|
||
|
|
disable(2): watchdog inactive"
|
||
|
|
::= { hmConfigWatchdogGroup 2 }
|
||
|
|
|
||
|
|
hmConfigWatchdogTimeInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period of the watchdog timer in seconds."
|
||
|
|
DEFVAL { 600 }
|
||
|
|
::= { hmConfigWatchdogGroup 3 }
|
||
|
|
|
||
|
|
hmConfigWatchdogTimerValue OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Current count-down value of the watchdog timer in seconds."
|
||
|
|
::= { hmConfigWatchdogGroup 4 }
|
||
|
|
|
||
|
|
hmConfigWatchdogIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Current IP Adress of station that triggers the watchdog."
|
||
|
|
::= { hmConfigWatchdogGroup 5 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- agent temperature Table --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmTempTable OBJECT IDENTIFIER ::= { hmAgent 5 }
|
||
|
|
|
||
|
|
hmTemperature OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This signed integer is used to identify the temperature
|
||
|
|
within the agent in units of centigrade (celsius)."
|
||
|
|
::= { hmTempTable 1 }
|
||
|
|
|
||
|
|
hmTempUprLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (-99..99)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is used to define a maximum level for the
|
||
|
|
temperature within an agent. If the temperature rises above
|
||
|
|
this upper limit, the management station will be notified by
|
||
|
|
a hmTemperature trap."
|
||
|
|
DEFVAL {70 }
|
||
|
|
::= { hmTempTable 2 }
|
||
|
|
|
||
|
|
hmTempLwrLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (-99..99)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is used to define a minimum level for the
|
||
|
|
temperature within a concentrator. If the temperature falls
|
||
|
|
below this lower limit, the management station will be notified
|
||
|
|
by a hmTemperature trap."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hmTempTable 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- agent / neighbour agent Table --
|
||
|
|
--
|
||
|
|
hmNeighbourAgentTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmNeighbourAgentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of the neighbour agents in a chassis"
|
||
|
|
::= { hmAgent 6 }
|
||
|
|
|
||
|
|
hmNeighbourAgentEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmNeighbourAgentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmNeighbourAgentTable."
|
||
|
|
INDEX { hmNeighbourSlot }
|
||
|
|
::= { hmNeighbourAgentTable 1 }
|
||
|
|
|
||
|
|
HmNeighbourAgentEntry ::= SEQUENCE {
|
||
|
|
hmNeighbourSlot Integer32,
|
||
|
|
hmNeighbourIpAddress IpAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
hmNeighbourSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an agent by the
|
||
|
|
slot in the chassis."
|
||
|
|
::= { hmNeighbourAgentEntry 1 }
|
||
|
|
|
||
|
|
hmNeighbourIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address of the agent."
|
||
|
|
::= { hmNeighbourAgentEntry 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Extension MIB, Authentication Group
|
||
|
|
--
|
||
|
|
-- Here begins the community and host tables which
|
||
|
|
-- provide security to the SNMPv1 agent. SNMPv1
|
||
|
|
-- typically has no security aspect. These tables grant
|
||
|
|
-- that ability to the agent. This security aspect can
|
||
|
|
-- be enabled or disabled through the hmSnmpSecurity
|
||
|
|
-- object.
|
||
|
|
--
|
||
|
|
-- The hmAuthHostTable lists the hosts which have access to
|
||
|
|
-- the agent externally (nodes on the network). These hosts must
|
||
|
|
-- belong to one of the pre-defined communities in
|
||
|
|
-- hmAuthCommTable.
|
||
|
|
--
|
||
|
|
-- hmAuthCommTable is a list of valid communities
|
||
|
|
-- recognized by the agent and the permissions of those
|
||
|
|
-- communities as to READ or READ-WRITE. READ permission
|
||
|
|
-- grants to the member of a community the ability to
|
||
|
|
-- GET information. READ-WRITE permission grants to the member
|
||
|
|
-- of a community the ability to GET and SET information.
|
||
|
|
--
|
||
|
|
-- EXAMPLES:
|
||
|
|
--
|
||
|
|
-- A Representative Authentication Community Table....
|
||
|
|
--
|
||
|
|
-- hmAuthCommTable
|
||
|
|
--
|
||
|
|
-- Index Name Perm State
|
||
|
|
-- -------------------------------------
|
||
|
|
-- | 1 |public | 2 (RW) | 1 (enable) |
|
||
|
|
-- -------------------------------------
|
||
|
|
-- | 2 |netman | 2 (RW) | 2 (disable)|
|
||
|
|
-- -------------------------------------
|
||
|
|
-- | 3 |private| 1 (RO) | 2 (disable)|
|
||
|
|
-- -------------------------------------
|
||
|
|
-- | | | | |
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- | 7 | | |
|
||
|
|
-- -------------------------------------
|
||
|
|
-- | 8 |admin | 2 (RW) | 1 (enable) |
|
||
|
|
-- -------------------------------------
|
||
|
|
--
|
||
|
|
-- A Representative Authentication Host Table....
|
||
|
|
--
|
||
|
|
-- hmAuthHostTable
|
||
|
|
--
|
||
|
|
-- Index Name CommName IPAddress IPMask State
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 1 |host1 |public | 1.2.3.4 | 255.255.255.0|2 (disable)|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 2 |host2 |public | 1.2.2.4 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 3 |ntbox |netman | 2.3.4.5 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 4 |sunbox |xyz | 3.4.5.6 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | | | | | | |
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- | 7 | | | | | |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 8 |macbox |admin | 4.3.2.1 | 255.255.255.0|3 (delete) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- 1) "host1", which belongs to community "public" attempts access
|
||
|
|
-- to the agent. This access is disallowed because "host1" is
|
||
|
|
-- disabled in the hmAuthHostTable.
|
||
|
|
--
|
||
|
|
-- 2) "ntbox", which belongs to community "netman" attempts access
|
||
|
|
-- to the agent. This access is disallowed because the
|
||
|
|
-- community "netman" is disabled.
|
||
|
|
--
|
||
|
|
-- 3) "sunbox", which belongs to community "xyz" attempts access
|
||
|
|
-- to the agent. This access is disallowed because the
|
||
|
|
-- community "xyz" does not exist.
|
||
|
|
--
|
||
|
|
-- 4) "host2", which belongs to community "public" attempts SET access
|
||
|
|
-- to the agent. This access is permitted.
|
||
|
|
--
|
||
|
|
--
|
||
|
|
hmAuthGroup OBJECT IDENTIFIER ::= { hmAgent 7 }
|
||
|
|
|
||
|
|
hmAuthHostTableEntriesMax OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum possible number of entries in the hmAuthHostTable.
|
||
|
|
This value equates to the total number of trusted Hosts which
|
||
|
|
potentially may be recognized."
|
||
|
|
::= { hmAuthGroup 1 }
|
||
|
|
|
||
|
|
hmAuthCommTableEntriesMax OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum possible number of entries in the hmAuthCommTable.
|
||
|
|
This value equates to the total number of communities which
|
||
|
|
ly may be recognized."
|
||
|
|
::= { hmAuthGroup 2 }
|
||
|
|
|
||
|
|
hmAuthCommTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAuthCommEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of valid SNMP Community Entries."
|
||
|
|
::= { hmAuthGroup 3 }
|
||
|
|
|
||
|
|
hmAuthCommEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAuthCommEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SNMP Community properties."
|
||
|
|
INDEX { hmAuthCommIndex }
|
||
|
|
::= { hmAuthCommTable 1 }
|
||
|
|
|
||
|
|
HmAuthCommEntry ::= SEQUENCE {
|
||
|
|
hmAuthCommIndex Integer32,
|
||
|
|
hmAuthCommName DisplayString,
|
||
|
|
hmAuthCommPerm INTEGER,
|
||
|
|
hmAuthCommState INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAuthCommIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an ordered entry in the
|
||
|
|
SNMP Community Table."
|
||
|
|
::= { hmAuthCommEntry 1 }
|
||
|
|
|
||
|
|
hmAuthCommName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of this SNMP Community Entry, e.g. public.
|
||
|
|
This object can only be written."
|
||
|
|
::= { hmAuthCommEntry 2 }
|
||
|
|
|
||
|
|
hmAuthCommPerm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
perm-ro(1),
|
||
|
|
perm-rw(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Read/Write (GET/SET) permission for the community. A (1)
|
||
|
|
indicates perm-ro (GET) permission. A (2) indicates perm-wr
|
||
|
|
(GET/SET) permission."
|
||
|
|
::= { hmAuthCommEntry 3 }
|
||
|
|
|
||
|
|
hmAuthCommState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
delete(3),
|
||
|
|
invalid(4) -- read-only, set returns SNMP_BADVALUE
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of this community entry. Enable (1) defines an entry
|
||
|
|
that is valid. Disable (2) defines an entry that is valid but
|
||
|
|
not enabled. Delete (3) removes an entry from the table.
|
||
|
|
Invalid (4) defines an entry that is no longer valid (e.g., an
|
||
|
|
entry that was deleted) and should be ignored. An attempt to set
|
||
|
|
a value of invalid (4) causes the agent to return SNMP_BADVALUE."
|
||
|
|
::= { hmAuthCommEntry 4 }
|
||
|
|
|
||
|
|
hmAuthHostTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAuthHostEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of valid SNMP Trusted Host Entries."
|
||
|
|
::= { hmAuthGroup 4 }
|
||
|
|
|
||
|
|
hmAuthHostEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAuthHostEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SNMP Host properties."
|
||
|
|
INDEX { hmAuthHostIndex }
|
||
|
|
::= { hmAuthHostTable 1 }
|
||
|
|
|
||
|
|
HmAuthHostEntry ::= SEQUENCE {
|
||
|
|
hmAuthHostIndex Integer32,
|
||
|
|
hmAuthHostName DisplayString,
|
||
|
|
hmAuthHostCommIndex Integer32,
|
||
|
|
hmAuthHostIpAddress IpAddress,
|
||
|
|
hmAuthHostIpMask IpAddress,
|
||
|
|
hmAuthHostState INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAuthHostIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an ordered entry in
|
||
|
|
the SNMP Trusted Host Table."
|
||
|
|
::= { hmAuthHostEntry 1 }
|
||
|
|
|
||
|
|
hmAuthHostName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of this SNMP Trusted Host Entry, e.g. host1."
|
||
|
|
::= { hmAuthHostEntry 2 }
|
||
|
|
|
||
|
|
hmAuthHostCommIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of this SNMP Trusted Host Entry's community entry in
|
||
|
|
the hmAuthCommTable."
|
||
|
|
::= { hmAuthHostEntry 3 }
|
||
|
|
|
||
|
|
hmAuthHostIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address for the host. This identified host has
|
||
|
|
permission to access information in this device's MIB tables,
|
||
|
|
providing the SNMP security toggle is on (see hmMiscSNMPSecurity)."
|
||
|
|
::= { hmAuthHostEntry 4 }
|
||
|
|
|
||
|
|
hmAuthHostIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Network Mask for the trusted Host entry."
|
||
|
|
::= { hmAuthHostEntry 5 }
|
||
|
|
|
||
|
|
hmAuthHostState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
delete(3),
|
||
|
|
invalid(4) -- read-only, set returns SNMP_BADVALUE
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of this trusted host entry. Enable (1) defines an
|
||
|
|
entry that is valid. Disable (2) defines an entry that is
|
||
|
|
valid but not enabled. Delete (3) removes an entry from the
|
||
|
|
table. Invalid (4) defines an entry that is no longer valid
|
||
|
|
(e.g., an entry that was deleted) and should be ignored. An
|
||
|
|
attempt to set a value of invalid (4) causes the agent to
|
||
|
|
return SNMP_BADVALUE."
|
||
|
|
::= { hmAuthHostEntry 6 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Extension MIB, Trap Group
|
||
|
|
--
|
||
|
|
-- Here begins the trap and destination tables which
|
||
|
|
-- provide configured SNMP Trap capability to the SNMPv1 agent.
|
||
|
|
--
|
||
|
|
-- The hmTrapCommTable lists the communities which hosts in
|
||
|
|
-- the hmTrapDestTable belong to. The hmTrapCommTable
|
||
|
|
-- defines types of SNMP traps which destinations belonging to these
|
||
|
|
-- communities are sent.
|
||
|
|
--
|
||
|
|
-- EXAMPLES:
|
||
|
|
--
|
||
|
|
-- A Representative Trap Community Table....
|
||
|
|
--
|
||
|
|
-- hmTrapCommTable
|
||
|
|
--
|
||
|
|
-- Cold Link Link OEM
|
||
|
|
-- Index Name Start Down Up Auth 1493 RMON Spec State
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
-- | 1 |public | 1 | 1 | 1 | 2 | 1 | 1 | 1 | 1 |
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
-- | 2 |netman | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
-- | 3 |private| 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
-- | | | | | | | | | | |
|
||
|
|
-- . . . . . . . . . .
|
||
|
|
-- . . . . . . . . . .
|
||
|
|
-- . . . . . . . . . .
|
||
|
|
-- | 7 | | | | | | |
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
-- | 8 |admin | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
||
|
|
-- --------------------------------------------------------
|
||
|
|
--
|
||
|
|
-- A Representative Trap Host (Destination) Table....
|
||
|
|
--
|
||
|
|
-- hmAuthHostTable
|
||
|
|
--
|
||
|
|
-- Index Name CommName IPAddress IPMask State
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 1 |host1 |public | 1.2.3.4 | 255.255.255.0|2 (disable)|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 2 |host2 |public | 1.2.2.4 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 3 |ntbox |netman | 2.3.4.5 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 4 |sunbox |xyz | 3.4.5.6 | 255.255.255.0|1 (enable) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | | | | | | |
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- . . . .
|
||
|
|
-- | 7 | | | | | |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- | 8 |macbox |admin | 4.3.2.1 | 255.255.255.0|3 (delete) |
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
--
|
||
|
|
-- <need examples>
|
||
|
|
--
|
||
|
|
|
||
|
|
hmTrapGroup OBJECT IDENTIFIER ::= { hmAgent 8 }
|
||
|
|
|
||
|
|
hmTrapCommTableEntriesMax OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of entries in the hmTrapCommTable. This value
|
||
|
|
equates to the total number of communities which potentially can
|
||
|
|
be recognized."
|
||
|
|
::= { hmTrapGroup 1 }
|
||
|
|
|
||
|
|
hmTrapDestTableEntriesMax OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of entries in the hmTrapDestTable. This
|
||
|
|
equates to the total number of hosts which can potentially
|
||
|
|
be sent SNMP traps."
|
||
|
|
::= { hmTrapGroup 2 }
|
||
|
|
|
||
|
|
hmTrapCommTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmTrapCommEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of valid SNMP Community Entries used for Traps."
|
||
|
|
::= { hmTrapGroup 3 }
|
||
|
|
|
||
|
|
hmTrapCommEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmTrapCommEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SNMP Trap Community properties."
|
||
|
|
INDEX { hmTrapCommIndex }
|
||
|
|
::= { hmTrapCommTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
HmTrapCommEntry ::= SEQUENCE {
|
||
|
|
hmTrapCommIndex Integer32,
|
||
|
|
hmTrapCommCommIndex Integer32,
|
||
|
|
hmTrapCommColdStart INTEGER,
|
||
|
|
hmTrapCommLinkDown INTEGER,
|
||
|
|
hmTrapCommLinkUp INTEGER,
|
||
|
|
hmTrapCommAuthentication INTEGER,
|
||
|
|
hmTrapCommBridge INTEGER,
|
||
|
|
hmTrapCommRMON INTEGER,
|
||
|
|
hmTrapCommUsergroup INTEGER,
|
||
|
|
hmTrapCommDualHoming INTEGER,
|
||
|
|
hmTrapCommChassis INTEGER,
|
||
|
|
hmTrapCommState INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmTrapCommIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an ordered entry in
|
||
|
|
the SNMP Community Trap Table."
|
||
|
|
::= { hmTrapCommEntry 1 }
|
||
|
|
|
||
|
|
hmTrapCommCommIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The communities entry index of this SNMP Trap Community Entry."
|
||
|
|
::= { hmTrapCommEntry 2 }
|
||
|
|
|
||
|
|
hmTrapCommColdStart OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP ColdStart Trap for this
|
||
|
|
SNMP community."
|
||
|
|
::= { hmTrapCommEntry 3 }
|
||
|
|
|
||
|
|
hmTrapCommLinkDown OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Link Down traps for this
|
||
|
|
SNMP community."
|
||
|
|
::= { hmTrapCommEntry 4 }
|
||
|
|
|
||
|
|
hmTrapCommLinkUp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Link Up traps for this
|
||
|
|
SNMP community."
|
||
|
|
::= { hmTrapCommEntry 5 }
|
||
|
|
|
||
|
|
hmTrapCommAuthentication OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Authentication traps for
|
||
|
|
this SNMP community."
|
||
|
|
::= { hmTrapCommEntry 6 }
|
||
|
|
|
||
|
|
hmTrapCommBridge OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Bridge MIB traps for this
|
||
|
|
SNMP community.
|
||
|
|
Available Traps:
|
||
|
|
newRoot (MACH)
|
||
|
|
topologyChange (MACH)"
|
||
|
|
::= { hmTrapCommEntry 7 }
|
||
|
|
|
||
|
|
hmTrapCommRMON OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP RMON traps for this SNMP
|
||
|
|
community.
|
||
|
|
Available Traps:
|
||
|
|
risingAlarm (MACH, MICE, RS2)
|
||
|
|
fallingAlarm (MACH, MICE, RS2)"
|
||
|
|
::= { hmTrapCommEntry 8 }
|
||
|
|
|
||
|
|
hmTrapCommUsergroup OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Enterprise usergroup traps
|
||
|
|
for this SNMP community.
|
||
|
|
Available Traps:
|
||
|
|
hmNewUserTrap (MACH)
|
||
|
|
hmPortSecurityTrap (MACH, MICE, RS2)
|
||
|
|
hmPortSecConfigErrorTrap (MACH)"
|
||
|
|
::= { hmTrapCommEntry 9 }
|
||
|
|
|
||
|
|
hmTrapCommDualHoming OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Enterprise dual homing traps
|
||
|
|
for this SNMP community.
|
||
|
|
Available Traps:
|
||
|
|
hmDuHmReconfig (MACH)
|
||
|
|
hmDuHmRedundancy (MACH)
|
||
|
|
hmRingRedReconfig (MACH, MICE)"
|
||
|
|
::= { hmTrapCommEntry 10 }
|
||
|
|
|
||
|
|
hmTrapCommChassis OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable (1) or Disable (2) the SNMP Enterprise chassis traps
|
||
|
|
for this SNMP community.
|
||
|
|
Available Traps:
|
||
|
|
hmGroupMapChange (MACH)
|
||
|
|
hmPowerSupply (MACH, MICE, RS2)
|
||
|
|
hmFan (MACH)
|
||
|
|
hmSignallingRelay (MICE, RS2)
|
||
|
|
hmStandby (MACH, MICE, RS2)
|
||
|
|
hmSelfTestError (MACH)
|
||
|
|
hmModuleMapChange (MICE)
|
||
|
|
hmTemperature (MACH)
|
||
|
|
hmLoginTrap (MACH)
|
||
|
|
hmDuplicateStaticAddressTrap (MACH)"
|
||
|
|
::= { hmTrapCommEntry 11 }
|
||
|
|
|
||
|
|
hmTrapCommState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
delete(3),
|
||
|
|
invalid(4) -- read-only, set returns SNMP_BADVALUE
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of this community entry. Enable (1) defines an entry
|
||
|
|
that is valid. Disable (2) defines an entry that is valid but
|
||
|
|
not enabled. Delete (3) removes an entry from the table.
|
||
|
|
Invalid (4) defines an entry that is no longer valid (e.g.,
|
||
|
|
an entry that was deleted) and should be ignored. An attempt
|
||
|
|
to set a value of invalid (4) causes the agent to return
|
||
|
|
SNMP_BADVALUE."
|
||
|
|
::= { hmTrapCommEntry 12 }
|
||
|
|
|
||
|
|
hmTrapDestTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmTrapDestEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of valid SNMP Trap Trusted Host Destination entries."
|
||
|
|
::= { hmTrapGroup 4 }
|
||
|
|
|
||
|
|
hmTrapDestEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmTrapDestEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of SNMP Trap Trusted Host Destination properties."
|
||
|
|
INDEX { hmTrapDestIndex }
|
||
|
|
::= { hmTrapDestTable 1 }
|
||
|
|
|
||
|
|
HmTrapDestEntry ::= SEQUENCE {
|
||
|
|
hmTrapDestIndex Integer32,
|
||
|
|
hmTrapDestName DisplayString,
|
||
|
|
hmTrapDestCommIndex Integer32,
|
||
|
|
hmTrapDestIpAddress IpAddress,
|
||
|
|
hmTrapDestIpMask IpAddress,
|
||
|
|
hmTrapDestState INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmTrapDestIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an ordered entry in
|
||
|
|
the SNMP Trusted Host Destination Table."
|
||
|
|
::= { hmTrapDestEntry 1 }
|
||
|
|
|
||
|
|
hmTrapDestName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of this SNMP Trusted Host Destination Entry, e.g. Admin."
|
||
|
|
::= { hmTrapDestEntry 2 }
|
||
|
|
|
||
|
|
hmTrapDestCommIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The communities entry index of this SNMP Trusted Host
|
||
|
|
Destination Entry's community."
|
||
|
|
::= { hmTrapDestEntry 3 }
|
||
|
|
|
||
|
|
hmTrapDestIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address for the host. This identified host has permission
|
||
|
|
to access information in this device's MIB tables, providing the
|
||
|
|
SNMP security toggle is on (see hmMiscSNMPSecurity)."
|
||
|
|
::= { hmTrapDestEntry 4 }
|
||
|
|
|
||
|
|
hmTrapDestIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS obsolete
|
||
|
|
DESCRIPTION
|
||
|
|
"The Network Mask for the trusted Host Destination entry."
|
||
|
|
::= { hmTrapDestEntry 5 }
|
||
|
|
|
||
|
|
hmTrapDestState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
delete(3),
|
||
|
|
invalid(4) -- read-only, set returns SNMP_BADVALUE
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of this trusted trap destination entry. Enable (1)
|
||
|
|
defines an entry that is valid. Disable (2) defines an entry
|
||
|
|
that is valid but not enabled. Delete (3) removes an entry
|
||
|
|
from the table. Invalid (4) defines an entry that is no
|
||
|
|
longer valid (e.g., an entry that was deleted) and should be
|
||
|
|
ignored. An attempt to set a value of invalid (4) causes the
|
||
|
|
agent to return SNMP_BADVALUE."
|
||
|
|
::= { hmTrapDestEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
hmLastAccessGroup OBJECT IDENTIFIER ::= { hmAgent 9 }
|
||
|
|
|
||
|
|
hmLastIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP Address specified in the last request."
|
||
|
|
::= { hmLastAccessGroup 1 }
|
||
|
|
|
||
|
|
hmLastPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "UDP port specified in the last request."
|
||
|
|
::= { hmLastAccessGroup 2 }
|
||
|
|
|
||
|
|
hmLastCommunity OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Last community string used."
|
||
|
|
::= { hmLastAccessGroup 3 }
|
||
|
|
|
||
|
|
hmLastLoginUserName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Last login user name used."
|
||
|
|
::= { hmLastAccessGroup 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Multicast Group --
|
||
|
|
--
|
||
|
|
hmMulticast OBJECT IDENTIFIER ::= { hmAgent 10 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- IGMP Group --
|
||
|
|
--
|
||
|
|
hmIGMPGroup OBJECT IDENTIFIER ::= { hmMulticast 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- IGMP Snooping Group --
|
||
|
|
--
|
||
|
|
hmIGMPSnoop OBJECT IDENTIFIER ::= { hmIGMPGroup 2 }
|
||
|
|
|
||
|
|
hmIGMPSnoopStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables IGMP Snooping on this device.
|
||
|
|
The default value is disable."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmIGMPSnoop 1 }
|
||
|
|
|
||
|
|
hmIGMPSnoopAgingTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (3..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The timeout period in seconds for aging out Multicast Groups
|
||
|
|
dynamically learned with IGMP Snooping. Note that aging operates
|
||
|
|
on a per interface per multicast group basis.
|
||
|
|
This interval is also used to age out ports that have received
|
||
|
|
IGMP Router Query PDUs.
|
||
|
|
The default is 260 seconds and the range is 3 to 3600 seconds."
|
||
|
|
DEFVAL { 260 }
|
||
|
|
::= { hmIGMPSnoop 2 }
|
||
|
|
|
||
|
|
hmIGMPSnoopUnknownMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
discard (1),
|
||
|
|
flood (2),
|
||
|
|
query-ports (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the mode how unknown Multicast packets
|
||
|
|
will be treated.
|
||
|
|
The default value is flood(2)."
|
||
|
|
DEFVAL { flood }
|
||
|
|
::= { hmIGMPSnoop 3 }
|
||
|
|
|
||
|
|
hmIGMPSnoopUnknownAgingTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (3..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The timeout period in seconds approximately for aging out Unknown Multicast Groups
|
||
|
|
dynamically learned with traffic snooping. The exactly value is
|
||
|
|
UnknownLookupInterval/(UnknownLookupInterval-UnknownLookupResponseTime)*UnknownAgingTime.
|
||
|
|
Note that aging operates on a per unknown multicast group basis.
|
||
|
|
The default is 260 seconds and the range is 3 to 3600 seconds."
|
||
|
|
DEFVAL { 260 }
|
||
|
|
::= { hmIGMPSnoop 4 }
|
||
|
|
|
||
|
|
hmIGMPSnoopUnknownLookupInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..3599)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The frequency at which Unknown Multicast Groups
|
||
|
|
dynamically learned with traffic snooping are
|
||
|
|
traffic checked by the switch in seconds.
|
||
|
|
So this is the time between periodic traffic checking
|
||
|
|
in which unknown multicast groups being aged on the switch
|
||
|
|
when it is acting as Trafficsnooper.
|
||
|
|
Large values lead to traffic checking less often.
|
||
|
|
The default is 125 seconds and the range is 2 to 3599 seconds."
|
||
|
|
DEFVAL { 125 }
|
||
|
|
::= { hmIGMPSnoop 5 }
|
||
|
|
|
||
|
|
hmIGMPSnoopUnknownLookupResponseTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3598)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The unknown lookup response time in seconds in which Unknown Multicast Groups
|
||
|
|
dynamically learned with traffic snooping are traffic checked.
|
||
|
|
So this is the time in which response traffic to the Trafficsnooper allowing
|
||
|
|
the update of unknown multicast group aging timer.
|
||
|
|
This variable enables the checking of bursty unknown multicast traffic.
|
||
|
|
Small values lead to bad traffic checking but few snooper load and
|
||
|
|
large values lead to good traffic checking but more snooper load.
|
||
|
|
The default is 10 seconds and the range is 1 to 3598 seconds."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { hmIGMPSnoop 6 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQuerierToPortmask OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables or disables the addition of query ports
|
||
|
|
to multicast filter portmasks."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmIGMPSnoop 7 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQuerierIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the IP address of the active querier."
|
||
|
|
::= { hmIGMPSnoop 8 }
|
||
|
|
|
||
|
|
-- The IGMP Query Table
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmIGMPSnoopQueryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table displaying the IGMP Router Query PDU ports."
|
||
|
|
::= { hmIGMPSnoop 10 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmIGMPSnoopQueryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table displaying the IGMP Router Query PDU ports.
|
||
|
|
These are maintained on a per VLAN basis."
|
||
|
|
INDEX { hmIGMPSnoopQueryVlanIndex }
|
||
|
|
::= { hmIGMPSnoopQueryTable 1 }
|
||
|
|
|
||
|
|
HmIGMPSnoopQueryEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmIGMPSnoopQueryVlanIndex Integer32,
|
||
|
|
hmIGMPSnoopQueryPorts OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the VLAN index for which this entry is valid.
|
||
|
|
If the switch only supports shared vlan learning (SVL),
|
||
|
|
the value is always 1 and there is only 1 instance in
|
||
|
|
the table."
|
||
|
|
::= { hmIGMPSnoopQueryEntry 1 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This read-only object displays the set of ports that have received
|
||
|
|
IGMP Router Query PDUs for this VLAN as determined by the IGMP
|
||
|
|
Snooping task."
|
||
|
|
::= { hmIGMPSnoopQueryEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The IGMP Snooping Multicast Database
|
||
|
|
|
||
|
|
hmIGMPSnoopFilterTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmIGMPSnoopFilterEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing the multicast filtering information
|
||
|
|
on a per vlan basis learned with IGMP Snooping."
|
||
|
|
::= { hmIGMPSnoop 11 }
|
||
|
|
|
||
|
|
hmIGMPSnoopFilterEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmIGMPSnoopFilterEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entry of the hmIGMPSnoopFilterTable."
|
||
|
|
INDEX { hmIGMPSnoopFilterVlanIndex, hmIGMPSnoopFilterAddress }
|
||
|
|
::= { hmIGMPSnoopFilterTable 1 }
|
||
|
|
|
||
|
|
HmIGMPSnoopFilterEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmIGMPSnoopFilterVlanIndex Integer32,
|
||
|
|
hmIGMPSnoopFilterAddress MacAddress,
|
||
|
|
hmIGMPSnoopFilterLearntPorts OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
hmIGMPSnoopFilterVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the VLAN index for which this entry is valid.
|
||
|
|
If the switch only supports shared vlan learning (SVL),
|
||
|
|
the value is always 1 and there is only 1 instance in
|
||
|
|
the table."
|
||
|
|
::= { hmIGMPSnoopFilterEntry 1 }
|
||
|
|
|
||
|
|
hmIGMPSnoopFilterAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The multicast destination MAC address in a frame to which
|
||
|
|
this entry's filtering information applies."
|
||
|
|
::= { hmIGMPSnoopFilterEntry 2 }
|
||
|
|
|
||
|
|
hmIGMPSnoopFilterLearntPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports, to which frames destined for this Group
|
||
|
|
MAC Address learned by IGMP Snooping are currently being
|
||
|
|
forwarded.
|
||
|
|
Each octet within the value of this object specifies
|
||
|
|
a set of eight ports, with the first octet specifying
|
||
|
|
ports 1 through 8, the second octet specifying ports 9
|
||
|
|
through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port.
|
||
|
|
Thus, each port of the bridge is represented by a single
|
||
|
|
bit within the value of this object.
|
||
|
|
If that bit has a value of '1' then that port is included
|
||
|
|
in the set of ports; the port is not included if its bit
|
||
|
|
has a value of '0'.
|
||
|
|
(Note that the setting of the bit corresponding to the port
|
||
|
|
from which a frame is received is irrelevant.)"
|
||
|
|
::= { hmIGMPSnoopFilterEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The IGMP Foward All Table
|
||
|
|
|
||
|
|
hmIGMPSnoopForwardAllTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmIGMPSnoopForwardAllEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing forwarding information for each
|
||
|
|
VLAN, specifying the set of ports to which forwarding of
|
||
|
|
all multicasts applies, configured statically by
|
||
|
|
management.
|
||
|
|
An entry appears in this table for all VLANs that are currently
|
||
|
|
instantiated."
|
||
|
|
::= { hmIGMPSnoop 12 }
|
||
|
|
|
||
|
|
hmIGMPSnoopForwardAllEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmIGMPSnoopForwardAllEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Forwarding information for a VLAN, specifying the set
|
||
|
|
of ports to which all multicasts should be forwarded,
|
||
|
|
configured statically by management."
|
||
|
|
INDEX { hmIGMPSnoopForwardAllVlanIndex }
|
||
|
|
::= { hmIGMPSnoopForwardAllTable 1 }
|
||
|
|
|
||
|
|
HmIGMPSnoopForwardAllEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmIGMPSnoopForwardAllVlanIndex Integer32,
|
||
|
|
hmIGMPSnoopForwardAllStaticPorts OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
hmIGMPSnoopForwardAllVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the VLAN index for which this entry is valid.
|
||
|
|
If the switch only supports shared vlan learning (SVL),
|
||
|
|
the value is always 1 and there is only 1 instance in
|
||
|
|
the table."
|
||
|
|
::= { hmIGMPSnoopForwardAllEntry 1 }
|
||
|
|
|
||
|
|
hmIGMPSnoopForwardAllStaticPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports configured by management in this VLAN
|
||
|
|
to which all multicast group-addressed frames learned by
|
||
|
|
IGMP are to be forwarded.
|
||
|
|
This value will be restored after the device is reset."
|
||
|
|
::= { hmIGMPSnoopForwardAllEntry 2 }
|
||
|
|
|
||
|
|
-- The IGMP Query Static Table
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmIGMPSnoopQueryStaticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table displaying the IGMP Static Query ports."
|
||
|
|
::= { hmIGMPSnoop 13 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmIGMPSnoopQueryStaticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entry of the hmIGMPSnoopQueryStaticTable."
|
||
|
|
INDEX { hmIGMPSnoopQueryStaticVlanIndex }
|
||
|
|
::= { hmIGMPSnoopQueryStaticTable 1 }
|
||
|
|
|
||
|
|
HmIGMPSnoopQueryStaticEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmIGMPSnoopQueryStaticVlanIndex Integer32,
|
||
|
|
hmIGMPSnoopQueryStaticPorts OCTET STRING,
|
||
|
|
hmIGMPSnoopQueryStaticAutomaticPorts OCTET STRING,
|
||
|
|
hmIGMPSnoopQueryStaticAutomaticPortsEnable OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the VLAN index for which this entry is valid.
|
||
|
|
If the switch only supports shared vlan learning (SVL),
|
||
|
|
the value is always 1 and there is only 1 instance in
|
||
|
|
the table."
|
||
|
|
::= { hmIGMPSnoopQueryStaticEntry 1 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports explicitly configured by management to
|
||
|
|
be IGMP-forwarding ports."
|
||
|
|
::= { hmIGMPSnoopQueryStaticEntry 2 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticAutomaticPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports that are automatically learned by LLDP protocol to
|
||
|
|
be IGMP-forwarding ports."
|
||
|
|
::= { hmIGMPSnoopQueryStaticEntry 3 }
|
||
|
|
|
||
|
|
hmIGMPSnoopQueryStaticAutomaticPortsEnable OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports that are allowed to be learned automatically by LLDP protocol to
|
||
|
|
be IGMP-forwarding ports."
|
||
|
|
::= { hmIGMPSnoopQueryStaticEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- IGMP Querier Group --
|
||
|
|
--
|
||
|
|
hmIGMPQuerierGroup OBJECT IDENTIFIER ::= { hmIGMPSnoop 100 }
|
||
|
|
|
||
|
|
hmIGMPQuerierStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables IGMP Querier on this device.
|
||
|
|
IGMP queries are only sent when hmIGMPSnoopStatus is also set.
|
||
|
|
The default value is disable."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmIGMPQuerierGroup 1 }
|
||
|
|
|
||
|
|
hmIGMPQuerierMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
querier (1),
|
||
|
|
non-querier (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the current mode of the IGMP Querier."
|
||
|
|
::= { hmIGMPQuerierGroup 2 }
|
||
|
|
|
||
|
|
hmIGMPQuerierTransmitInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..3599)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The frequency at which IGMP general query packets are
|
||
|
|
transmitted by the querying switch in seconds.
|
||
|
|
So this is the time between general periodic queries being
|
||
|
|
sent out of the switch when it is acting as the IGMP querier.
|
||
|
|
Large values lead to IGMP queries being sent less often.
|
||
|
|
The default is 125 seconds and the range is 2 to 3599 seconds."
|
||
|
|
DEFVAL { 125 }
|
||
|
|
::= { hmIGMPQuerierGroup 3 }
|
||
|
|
|
||
|
|
hmIGMPQuerierMaxResponseTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3598)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum query response time in seconds advertised in IGMP v2
|
||
|
|
queries on this VLAN if the switch is the querier. Smaller values
|
||
|
|
allow a switch to prune groups faster. So it is the maximum response
|
||
|
|
time inserted into the general periodic queries. This variable
|
||
|
|
enables the tuning of the burstiness of the IGMP traffic.
|
||
|
|
If it is increased the responses have a larger time span in which
|
||
|
|
to be generated by the hosts.
|
||
|
|
The default is 10 seconds and the range is 1 to 3598 seconds."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { hmIGMPQuerierGroup 4 }
|
||
|
|
|
||
|
|
hmIGMPQuerierProtocolVersion OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Querier protocol version.
|
||
|
|
The default is version 2."
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { hmIGMPQuerierGroup 5 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- GMRP Group --
|
||
|
|
--
|
||
|
|
hmGMRPGroup OBJECT IDENTIFIER ::= { hmMulticast 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- HM GMRP --
|
||
|
|
--
|
||
|
|
hmGMRP OBJECT IDENTIFIER ::= { hmGMRPGroup 1 }
|
||
|
|
|
||
|
|
hmGmrpUnknownMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
discard (1),
|
||
|
|
flood (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the mode how unknown multicast packets will be treated.
|
||
|
|
The default value is flood(2)."
|
||
|
|
DEFVAL { flood }
|
||
|
|
::= { hmGMRP 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmAgent / Relay-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRelayGroup OBJECT IDENTIFIER ::= { hmAgent 11 }
|
||
|
|
|
||
|
|
hmRelayOption82Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the DHCP Option 82 defined in RFC 3046
|
||
|
|
on this device."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmRelayGroup 1 }
|
||
|
|
|
||
|
|
hmRelayOptionRemoteIDType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ip(1),
|
||
|
|
mac(2),
|
||
|
|
client-id(3),
|
||
|
|
other(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This option determines the content of the Agent Remote ID (sub-option 2).
|
||
|
|
ip(1) inserts the ip address of the relay's mgmt-interface
|
||
|
|
and encodes it with sub option type A1.
|
||
|
|
mac(2) inserts the mac adress of the relay's mgmt-interface
|
||
|
|
and encodes it with sub option type 00.
|
||
|
|
client-id(3) inserts the client identifier (sysName) of the relay's mgmt-interface
|
||
|
|
and encodes it with sub option type A2.
|
||
|
|
other(4) inserts the value in hmRelayOptionRemoteIDValue
|
||
|
|
and encodes it with sub option type A3."
|
||
|
|
DEFVAL { mac }
|
||
|
|
::= { hmRelayGroup 2 }
|
||
|
|
|
||
|
|
hmRelayOptionRemoteID OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Displays the actual content of the Remote ID sub option for this relay agent.
|
||
|
|
The value is encoded in TLV (Type-Length-Value) format.
|
||
|
|
The following type values are currently defined:
|
||
|
|
00 = mac adress
|
||
|
|
A1 = ip address
|
||
|
|
A2 = client identifier
|
||
|
|
A3 = string in hmRelayOptionRemoteIDValue"
|
||
|
|
::= { hmRelayGroup 3 }
|
||
|
|
|
||
|
|
hmRelayOptionRemoteIDValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Contains an octet string to be used as value for
|
||
|
|
Agent Remote ID Sub-option type A3"
|
||
|
|
::= { hmRelayGroup 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- hmRelayGroup / Relay-Server-group --
|
||
|
|
--
|
||
|
|
|
||
|
|
hmRelayServerGroup OBJECT IDENTIFIER ::= { hmRelayGroup 10 }
|
||
|
|
|
||
|
|
hmRelayDHCPServerIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the first DHCP-server to be addressed
|
||
|
|
by the relay agent.
|
||
|
|
If 0.0.0.0, DHCP relaying is switched off for this entry."
|
||
|
|
::= { hmRelayServerGroup 1 }
|
||
|
|
|
||
|
|
hmRelayDHCPServer2IpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the second DHCP-server to be addressed
|
||
|
|
by the relay agent.
|
||
|
|
If 0.0.0.0, DHCP relaying is switched off for this entry."
|
||
|
|
::= { hmRelayServerGroup 2 }
|
||
|
|
|
||
|
|
hmRelayDHCPServer3IpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the third DHCP-server to be addressed
|
||
|
|
by the relay agent.
|
||
|
|
If 0.0.0.0, DHCP relaying is switched off for this entry."
|
||
|
|
::= { hmRelayServerGroup 3 }
|
||
|
|
|
||
|
|
hmRelayDHCPServer4IpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the fourth DHCP-server to be addressed
|
||
|
|
by the relay agent.
|
||
|
|
If 0.0.0.0, DHCP relaying is switched off for this entry."
|
||
|
|
::= { hmRelayServerGroup 4 }
|
||
|
|
|
||
|
|
hmRelayInterfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmRelayInterfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each interface of
|
||
|
|
the switch."
|
||
|
|
::= { hmRelayGroup 11 }
|
||
|
|
|
||
|
|
hmRelayInterfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmRelayInterfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmRelayInterfaceTable."
|
||
|
|
INDEX { hmRelayIfaceGroupID, hmRelayIfaceID }
|
||
|
|
::= { hmRelayInterfaceTable 1 }
|
||
|
|
|
||
|
|
HmRelayInterfaceEntry ::= SEQUENCE {
|
||
|
|
hmRelayIfaceGroupID Integer32,
|
||
|
|
hmRelayIfaceID Integer32,
|
||
|
|
hmRelayIfaceOption82Enable INTEGER,
|
||
|
|
hmRelayIfaceBCRequestFwd INTEGER,
|
||
|
|
hmRelayIfaceCircuitID OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
hmRelayIfaceGroupID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..5)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface card. This value is never
|
||
|
|
greater than hmSysGroupCapacity."
|
||
|
|
::= { hmRelayInterfaceEntry 1 }
|
||
|
|
|
||
|
|
hmRelayIfaceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"index to identify an interface within an interface card."
|
||
|
|
::= { hmRelayInterfaceEntry 2 }
|
||
|
|
|
||
|
|
hmRelayIfaceOption82Enable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable DHCP Option 82 on this physical port."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmRelayInterfaceEntry 3 }
|
||
|
|
|
||
|
|
hmRelayIfaceBCRequestFwd OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
forward (1),
|
||
|
|
discard (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable relaying of incoming broadcasted
|
||
|
|
BOOTP/DHCP request packets on this physical port.
|
||
|
|
Hirschmann Multicast BOOTP/DHCP requests will always be relayed."
|
||
|
|
DEFVAL { forward }
|
||
|
|
::= { hmRelayInterfaceEntry 4 }
|
||
|
|
|
||
|
|
hmRelayIfaceCircuitID OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Contains the actual Circuit ID sub option for this interface of the relay agent.
|
||
|
|
It is a best guess value, since some information is not known
|
||
|
|
before the actual reception of a BOOTP/DHCP request message."
|
||
|
|
::= { hmRelayInterfaceEntry 5 }
|
||
|
|
|
||
|
|
hmRelayBCPktInCnt OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of BOOTP/DHCP broadcast request packets received
|
||
|
|
by the relay agent."
|
||
|
|
::= { hmRelayGroup 20 }
|
||
|
|
|
||
|
|
hmRelayMCPktInCnt OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of BOOTP/DHCP multicast request packets received
|
||
|
|
by the relay agent."
|
||
|
|
::= { hmRelayGroup 21 }
|
||
|
|
|
||
|
|
hmRelayPktServerRelayCnt OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of BOOTP/DHCP requests relayed to the DHCP Server."
|
||
|
|
::= { hmRelayGroup 22 }
|
||
|
|
|
||
|
|
hmRelayPktClientRelayCnt OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of BOOTP/DHCP replies relayed to the Client."
|
||
|
|
::= { hmRelayGroup 23 }
|
||
|
|
|
||
|
|
hmRelayErrCnt OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of errors encountered within the relay agent."
|
||
|
|
::= { hmRelayGroup 24 }
|
||
|
|
|
||
|
|
hmRelayLastDuplicateIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The last duplicate ip address encounterd by the relay agent."
|
||
|
|
::= { hmRelayGroup 25 }
|
||
|
|
|
||
|
|
|
||
|
|
hmDeviceMonitoringGroup OBJECT IDENTIFIER ::= { hmAgent 12 }
|
||
|
|
|
||
|
|
hmSigConConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSigConConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables to configure the behaviour
|
||
|
|
of the signalling contacts."
|
||
|
|
::= { hmDeviceMonitoringGroup 1 }
|
||
|
|
|
||
|
|
hmSigConConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSigConConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmSigConConfigTable."
|
||
|
|
INDEX { hmSigConID }
|
||
|
|
::= { hmSigConConfigTable 1 }
|
||
|
|
|
||
|
|
HmSigConConfigEntry ::= SEQUENCE {
|
||
|
|
hmSigConID Integer32,
|
||
|
|
hmSigConTrapEnable INTEGER,
|
||
|
|
hmSigConTrapCause INTEGER,
|
||
|
|
hmSigConTrapCauseIndex Integer32,
|
||
|
|
hmSigConMode INTEGER,
|
||
|
|
hmSigConManualActivate INTEGER,
|
||
|
|
hmSigConOperState INTEGER,
|
||
|
|
hmSigConSenseLinkFailure INTEGER,
|
||
|
|
hmSigConSenseControlLine INTEGER,
|
||
|
|
hmSigConSenseRedNotGuaranteed INTEGER,
|
||
|
|
hmSigConSensePS1State INTEGER,
|
||
|
|
hmSigConSensePS2State INTEGER,
|
||
|
|
hmSigConSenseTemperature INTEGER,
|
||
|
|
hmSigConSenseModuleRemoval INTEGER,
|
||
|
|
hmSigConSenseACARemoval INTEGER,
|
||
|
|
hmSigConSensePS3State INTEGER,
|
||
|
|
hmSigConSensePS4State INTEGER,
|
||
|
|
hmSigConSenseFan1State INTEGER,
|
||
|
|
hmSigConSensePS5State INTEGER,
|
||
|
|
hmSigConSensePS6State INTEGER,
|
||
|
|
hmSigConSensePS7State INTEGER,
|
||
|
|
hmSigConSensePS8State INTEGER,
|
||
|
|
hmSigConSenseACANotInSync INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSigConID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated
|
||
|
|
signalling contact."
|
||
|
|
::= { hmSigConConfigEntry 1 }
|
||
|
|
|
||
|
|
hmSigConTrapEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Determines wether a trap shall be sent or not, when
|
||
|
|
the signal contact operating state changes."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 2 }
|
||
|
|
|
||
|
|
hmSigConTrapCause OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
linkFailure(2),
|
||
|
|
controlLine(3),
|
||
|
|
redNotGuaranteed(4),
|
||
|
|
psState(5),
|
||
|
|
temperature(6),
|
||
|
|
moduleRemoval(7),
|
||
|
|
acaRemoval(8),
|
||
|
|
fanFailure(9),
|
||
|
|
acaNotInSync(10)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the cause for a trap.
|
||
|
|
The index of the entity which produces the trap
|
||
|
|
is specified by hmSigConTrapCauseIndex."
|
||
|
|
::= { hmSigConConfigEntry 3 }
|
||
|
|
|
||
|
|
hmSigConTrapCauseIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute specifies the entity which produces the trap.
|
||
|
|
1 - n: index of powersupply table / interfaces table
|
||
|
|
0: other errors"
|
||
|
|
::= { hmSigConConfigEntry 4 }
|
||
|
|
|
||
|
|
hmSigConMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { manual(1), monitor(2), devicestate(3) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute specifies the behaviour of the relay contact.
|
||
|
|
The factory settings for signal contact 1 is monitoring the
|
||
|
|
correct operation of entries specified to be survied.
|
||
|
|
When the device has also a second signal contact, the factory
|
||
|
|
setting for it is the manual mode."
|
||
|
|
::= { hmSigConConfigEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSigConManualActivate OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { close(1), open(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When operating in manual mode, the signal contact state can
|
||
|
|
be set by this attribute."
|
||
|
|
::= { hmSigConConfigEntry 6 }
|
||
|
|
|
||
|
|
hmSigConOperState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { open(1), close(2) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute shows the current operating state of the
|
||
|
|
signal contact."
|
||
|
|
::= { hmSigConConfigEntry 7 }
|
||
|
|
|
||
|
|
hmSigConSenseLinkFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the network connection(s)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 8 }
|
||
|
|
|
||
|
|
hmSigConSenseControlLine OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the ring/network coupling."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 9 }
|
||
|
|
|
||
|
|
hmSigConSenseRedNotGuaranteed OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the HIPER-Ring."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 10 }
|
||
|
|
|
||
|
|
hmSigConSensePS1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 1."
|
||
|
|
::= { hmSigConConfigEntry 11 }
|
||
|
|
|
||
|
|
hmSigConSensePS2State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 2."
|
||
|
|
::= { hmSigConConfigEntry 12 }
|
||
|
|
|
||
|
|
hmSigConSenseTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the device temperature."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 13 }
|
||
|
|
|
||
|
|
hmSigConSenseModuleRemoval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of module removal (platform dependant)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 14 }
|
||
|
|
|
||
|
|
hmSigConSenseACARemoval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the auto configuration adapter removal."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 15 }
|
||
|
|
|
||
|
|
hmSigConSensePS3State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 3 (platform dependant)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 16 }
|
||
|
|
|
||
|
|
hmSigConSensePS4State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 4 (platform dependant)."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 17 }
|
||
|
|
|
||
|
|
hmSigConSenseFan1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the cooling fan (platform dependant)."
|
||
|
|
::= { hmSigConConfigEntry 18 }
|
||
|
|
|
||
|
|
hmSigConSensePS5State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 5 (platform dependant)."
|
||
|
|
::= { hmSigConConfigEntry 19 }
|
||
|
|
|
||
|
|
hmSigConSensePS6State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 6 (platform dependant)."
|
||
|
|
::= { hmSigConConfigEntry 20 }
|
||
|
|
|
||
|
|
hmSigConSensePS7State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 7 (platform dependant)."
|
||
|
|
::= { hmSigConConfigEntry 21 }
|
||
|
|
|
||
|
|
hmSigConSensePS8State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 8 (platform dependant)."
|
||
|
|
::= { hmSigConConfigEntry 22 }
|
||
|
|
|
||
|
|
hmSigConSenseACANotInSync OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring whether the configuration on ACA is in
|
||
|
|
sync with the configuration in NVRAM."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConConfigEntry 23 }
|
||
|
|
|
||
|
|
hmSigConLinkTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmSigConLinkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables to mask an alarm for the
|
||
|
|
signalling relay, produced by a link. The index for a link
|
||
|
|
corresponds with ifMauIfIndex. The table is also used
|
||
|
|
for the device monitoring configuration."
|
||
|
|
::= { hmDeviceMonitoringGroup 2 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSigConLinkEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmSigConLinkEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The entry of the hmSigConLinkTable."
|
||
|
|
INDEX { hmSigConLinkID }
|
||
|
|
::= { hmSigConLinkTable 1 }
|
||
|
|
|
||
|
|
HmSigConLinkEntry ::= SEQUENCE {
|
||
|
|
hmSigConLinkID Integer32,
|
||
|
|
hmSigConLinkAlarm INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmSigConLinkID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated link and
|
||
|
|
corresponds with ifMauIfIndex."
|
||
|
|
::= { hmSigConLinkEntry 1 }
|
||
|
|
|
||
|
|
hmSigConLinkAlarm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether an alarm for the signalling relay of the
|
||
|
|
associated link will be produced or not, so you can mask the
|
||
|
|
value of ifMauMediaAvailable."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmSigConLinkEntry 2 }
|
||
|
|
|
||
|
|
hmDevMonConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmDevMonConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains all variables to configure the behaviour
|
||
|
|
of the device state."
|
||
|
|
::= { hmDeviceMonitoringGroup 3 }
|
||
|
|
|
||
|
|
hmDevMonConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmDevMonConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Configuration of the device monitoring."
|
||
|
|
INDEX { hmDevMonID }
|
||
|
|
::= { hmDevMonConfigTable 1 }
|
||
|
|
|
||
|
|
HmDevMonConfigEntry ::= SEQUENCE {
|
||
|
|
hmDevMonID Integer32,
|
||
|
|
hmDevMonTrapEnable INTEGER,
|
||
|
|
hmDevMonTrapCause INTEGER,
|
||
|
|
hmDevMonTrapCauseIndex Integer32,
|
||
|
|
hmDevMonSwitchState INTEGER,
|
||
|
|
hmDevMonSenseLinkFailure INTEGER,
|
||
|
|
hmDevMonSenseControlLine INTEGER,
|
||
|
|
hmDevMonSenseRedNotGuaranteed INTEGER,
|
||
|
|
hmDevMonSensePS1State INTEGER,
|
||
|
|
hmDevMonSensePS2State INTEGER,
|
||
|
|
hmDevMonSenseTemperature INTEGER,
|
||
|
|
hmDevMonSenseModuleRemoval INTEGER,
|
||
|
|
hmDevMonSenseACARemoval INTEGER,
|
||
|
|
hmDevMonSensePS3State INTEGER,
|
||
|
|
hmDevMonSensePS4State INTEGER,
|
||
|
|
hmDevMonSenseFan1State INTEGER,
|
||
|
|
hmDevMonSensePS5State INTEGER,
|
||
|
|
hmDevMonSensePS6State INTEGER,
|
||
|
|
hmDevMonSensePS7State INTEGER,
|
||
|
|
hmDevMonSensePS8State INTEGER,
|
||
|
|
hmDevMonSenseACANotInSync INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmDevMonID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..1)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This index is used to identify the associated
|
||
|
|
device status (currently only one)."
|
||
|
|
::= { hmDevMonConfigEntry 1 }
|
||
|
|
|
||
|
|
hmDevMonTrapEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Determines wether a trap shall be sent or not, when
|
||
|
|
the device monitoring state changes."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmDevMonConfigEntry 2 }
|
||
|
|
|
||
|
|
hmDevMonTrapCause OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
linkFailure(2),
|
||
|
|
controlLine(3),
|
||
|
|
redNotGuaranteed(4),
|
||
|
|
psState(5),
|
||
|
|
temperature(6),
|
||
|
|
moduleRemoval(7),
|
||
|
|
acaRemoval(8),
|
||
|
|
fanFailure(9),
|
||
|
|
acaNotInSync(10)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the cause for a trap.
|
||
|
|
The index of the entity which produces the trap
|
||
|
|
is specified by hmDevMonTrapCauseIndex."
|
||
|
|
::= { hmDevMonConfigEntry 3 }
|
||
|
|
|
||
|
|
hmDevMonTrapCauseIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute specifies the entity which produces the trap.
|
||
|
|
1 - n: index of powersupply table / interfaces table
|
||
|
|
0: other errors"
|
||
|
|
::= { hmDevMonConfigEntry 4 }
|
||
|
|
|
||
|
|
hmDevMonSwitchState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), noerror(2) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute shows the current state of the
|
||
|
|
device monitoring."
|
||
|
|
::= { hmDevMonConfigEntry 5 }
|
||
|
|
|
||
|
|
hmDevMonSenseLinkFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the network connection(s)."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 6 }
|
||
|
|
|
||
|
|
hmDevMonSenseControlLine OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the ring/network coupling."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 7 }
|
||
|
|
|
||
|
|
hmDevMonSenseRedNotGuaranteed OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the HIPER-Ring."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 8 }
|
||
|
|
|
||
|
|
hmDevMonSensePS1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 1."
|
||
|
|
DEFVAL { error }
|
||
|
|
::= { hmDevMonConfigEntry 9 }
|
||
|
|
|
||
|
|
hmDevMonSensePS2State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 2."
|
||
|
|
DEFVAL { error }
|
||
|
|
::= { hmDevMonConfigEntry 10 }
|
||
|
|
|
||
|
|
hmDevMonSenseTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the device temperature."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 11 }
|
||
|
|
|
||
|
|
hmDevMonSenseModuleRemoval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of module removal (platform dependant)."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 12 }
|
||
|
|
|
||
|
|
hmDevMonSenseACARemoval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the auto configuration adapter removal."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 13 }
|
||
|
|
|
||
|
|
hmDevMonSensePS3State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 3 (platform dependant)."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 14 }
|
||
|
|
|
||
|
|
hmDevMonSensePS4State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 4 (platform dependant)."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 15 }
|
||
|
|
|
||
|
|
hmDevMonSenseFan1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the cooling fan (platform dependant)."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 16 }
|
||
|
|
|
||
|
|
hmDevMonSensePS5State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 5 (platform dependant)."
|
||
|
|
::= { hmDevMonConfigEntry 17 }
|
||
|
|
|
||
|
|
hmDevMonSensePS6State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 6 (platform dependant)."
|
||
|
|
::= { hmDevMonConfigEntry 18 }
|
||
|
|
|
||
|
|
hmDevMonSensePS7State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 7 (platform dependant)."
|
||
|
|
::= { hmDevMonConfigEntry 19 }
|
||
|
|
|
||
|
|
hmDevMonSensePS8State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring of the power supply 8 (platform dependant)."
|
||
|
|
::= { hmDevMonConfigEntry 20 }
|
||
|
|
|
||
|
|
hmDevMonSenseACANotInSync OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { error(1), ignore(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the monitoring whether the configuration on ACA is in sync with the configuration in NVRAM."
|
||
|
|
DEFVAL { ignore }
|
||
|
|
::= { hmDevMonConfigEntry 21 }
|
||
|
|
|
||
|
|
|
||
|
|
--##############################################################################
|
||
|
|
|
||
|
|
hmAgentSnmpConfigGroup OBJECT IDENTIFIER ::= { hmAgent 13 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityCreate OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (1..32))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Creates a new SNMP Community entry.
|
||
|
|
Defaults: IPAddress 0.0.0.0
|
||
|
|
IpMask 0.0.0.0
|
||
|
|
AccessMode read-only
|
||
|
|
Status config"
|
||
|
|
::= { hmAgentSnmpConfigGroup 1 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAgentSnmpCommunityConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table of the switch's SNMP Config entries"
|
||
|
|
::= { hmAgentSnmpConfigGroup 2 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAgentSnmpCommunityConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Switch's SNMP Config entry"
|
||
|
|
INDEX {hmAgentSnmpCommunityIndex }
|
||
|
|
::= { hmAgentSnmpCommunityConfigTable 1 }
|
||
|
|
|
||
|
|
HmAgentSnmpCommunityConfigEntry ::= SEQUENCE {
|
||
|
|
hmAgentSnmpCommunityIndex
|
||
|
|
Integer32,
|
||
|
|
hmAgentSnmpCommunityName
|
||
|
|
DisplayString,
|
||
|
|
hmAgentSnmpCommunityIPAddress
|
||
|
|
IpAddress,
|
||
|
|
hmAgentSnmpCommunityIPMask
|
||
|
|
IpAddress,
|
||
|
|
hmAgentSnmpCommunityAccessMode
|
||
|
|
INTEGER,
|
||
|
|
hmAgentSnmpCommunityStatus
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..9)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community Index"
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 1 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (1..32))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community Name
|
||
|
|
This name identifies each SNMP community;
|
||
|
|
the name can be up to 32 characters, and it is case-sensitive.
|
||
|
|
Community names in the SNMP community must be unique.
|
||
|
|
If you make multiple entries using the same community name,
|
||
|
|
the first entry is kept and processed and all duplicate entries are ignored.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 2 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community IP Address
|
||
|
|
Client IP Address - This attribute is an IP address (or portion thereof)
|
||
|
|
from which this device will accept SNMP packets with the associated
|
||
|
|
community. The requesting entity's IP address is logical-ANDed with
|
||
|
|
the Client IP Mask and the result must match the Client IP Address.
|
||
|
|
Note: If the Client IP Mask is set
|
||
|
|
to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 3 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityIPMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community IP Mask
|
||
|
|
Client IP Mask - This attribute is a mask to be logical-ANDed with the
|
||
|
|
requesting entity's IP address before comparison with the Client IP Address.
|
||
|
|
If the result matches with Client IP Address then the address is an
|
||
|
|
authenticated IP address. For example, if the Client IP Address
|
||
|
|
is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0,
|
||
|
|
a range of incoming IP addresses would match, that is, the incoming IP
|
||
|
|
addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255.
|
||
|
|
To have a specific IP address be the only authenticated IP address, set the
|
||
|
|
Client IP Address to the required IP address and set the Client IP Mask
|
||
|
|
to 255.255.255.255."
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 4 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityAccessMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
readOnly(1),
|
||
|
|
readWrite(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community Access Mode
|
||
|
|
Access Mode - This value can be read-only or read/write.
|
||
|
|
A community with a read-only access allows for switch information to be
|
||
|
|
displayed. A community with a read/write access allows for configuration
|
||
|
|
changes to be made and for information to be displayed.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 5 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notInService(2),
|
||
|
|
config(3),
|
||
|
|
destroy(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Community Status.
|
||
|
|
|
||
|
|
active(1) - This community is active, allowing SNMP managers associated
|
||
|
|
with this community to manage the switch according to its
|
||
|
|
access right.
|
||
|
|
|
||
|
|
notInService(2) - This community is not active; no SNMP requests using this
|
||
|
|
community will be accepted. In this case the SNMP manager
|
||
|
|
associated with this community cannot manage the switch until
|
||
|
|
the Status is changed back to active(1).
|
||
|
|
|
||
|
|
config(3) - The community Status must be set to this value in order to
|
||
|
|
configure it. When creating a new community entry, initial
|
||
|
|
Status will be set to this value.
|
||
|
|
|
||
|
|
destroy(4) - Set to this value to remove the community from the agent."
|
||
|
|
::= { hmAgentSnmpCommunityConfigEntry 6 }
|
||
|
|
|
||
|
|
--**************************************************************************************
|
||
|
|
-- hmAgentSnmpLoggingGroup
|
||
|
|
--
|
||
|
|
--**************************************************************************************
|
||
|
|
hmAgentSnmpLoggingGroup OBJECT IDENTIFIER ::=
|
||
|
|
{ hmAgentSnmpConfigGroup 8 }
|
||
|
|
|
||
|
|
hmAgentSnmpLogGetRequest OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable logging of SNMP GET requests."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmAgentSnmpLoggingGroup 1 }
|
||
|
|
|
||
|
|
hmAgentSnmpLogSetRequest OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable logging of SNMP SET requests."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmAgentSnmpLoggingGroup 2 }
|
||
|
|
|
||
|
|
hmAgentSnmpLogGetSeverity OBJECT-TYPE
|
||
|
|
SYNTAX HmAgentLogSeverity
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Define the log severity for SNMP GET requests."
|
||
|
|
DEFVAL { notice }
|
||
|
|
::= { hmAgentSnmpLoggingGroup 3 }
|
||
|
|
|
||
|
|
hmAgentSnmpLogSetSeverity OBJECT-TYPE
|
||
|
|
SYNTAX HmAgentLogSeverity
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Define the log severity for SNMP SET requests."
|
||
|
|
DEFVAL { notice }
|
||
|
|
::= { hmAgentSnmpLoggingGroup 4 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
--**************************************************************************************
|
||
|
|
-- hmAgentSnmpTrapReceiverConfigTable
|
||
|
|
--
|
||
|
|
--**************************************************************************************
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverCreate OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(1..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Creates a new trap receiver entry.
|
||
|
|
Defaults: IPAddress 0.0.0.0
|
||
|
|
status config"
|
||
|
|
::= { hmAgentSnmpConfigGroup 3 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmAgentSnmpTrapReceiverConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Trap messages are sent across a network to an SNMP Network Manager.
|
||
|
|
These messages alert the manager to events occurring within the switch
|
||
|
|
or on the network. Up to six simultaneous trap receivers are supported.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpConfigGroup 4 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmAgentSnmpTrapReceiverConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Switch's Snmp Trace Receiver Config entry"
|
||
|
|
INDEX { hmAgentSnmpTrapReceiverIndex }
|
||
|
|
::= { hmAgentSnmpTrapReceiverConfigTable 1 }
|
||
|
|
|
||
|
|
HmAgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
|
||
|
|
hmAgentSnmpTrapReceiverIndex
|
||
|
|
Integer32,
|
||
|
|
hmAgentSnmpTrapReceiverCommunityName
|
||
|
|
DisplayString,
|
||
|
|
hmAgentSnmpTrapReceiverIPAddress
|
||
|
|
IpAddress,
|
||
|
|
hmAgentSnmpTrapReceiverStatus
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..9)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Trap Receiver Index"
|
||
|
|
::= { hmAgentSnmpTrapReceiverConfigEntry 1 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverCommunityName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(1..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Trap Receiver Community Name.
|
||
|
|
This is the SNMP community name of the remote network manager;
|
||
|
|
the name can be up to 16 characters, and is case-sensitive.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpTrapReceiverConfigEntry 2 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"IP Address - Each IP address parameter is four integer numbers.
|
||
|
|
The numbers range from 0 to 255.
|
||
|
|
"
|
||
|
|
::= { hmAgentSnmpTrapReceiverConfigEntry 3 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notInService(2),
|
||
|
|
config(3),
|
||
|
|
destroy(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch's Snmp Trap Reciever Status.
|
||
|
|
active(1) - This trap receiver is active, allowing SNMP Traps to
|
||
|
|
be sent to this receiver.
|
||
|
|
|
||
|
|
notInService(2) - This trap reciever is not active; no SNMP Traps will
|
||
|
|
be sent to this reciever until it's set back to active(1).
|
||
|
|
|
||
|
|
|
||
|
|
config(3) - The trap reciever Status must be set to this value in order
|
||
|
|
to configure it. When creating a new trap receiver entry,
|
||
|
|
the Status will initially be set to this value.
|
||
|
|
Note: hmAgentSnmpTrapReceiverIPAddress must be set to non-zero
|
||
|
|
before changing to active(1) or notInService(2).
|
||
|
|
|
||
|
|
destroy(4) - Set to this value to remove the trap receiver entry from
|
||
|
|
the agent."
|
||
|
|
::= { hmAgentSnmpTrapReceiverConfigEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--**************************************************************************************
|
||
|
|
-- hmAgentSnmpTrapFlagsConfigGroup
|
||
|
|
--
|
||
|
|
--**************************************************************************************
|
||
|
|
|
||
|
|
hmAgentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::= { hmAgentSnmpConfigGroup 5 }
|
||
|
|
|
||
|
|
hmAgentSnmpAuthenticationTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Authentication Flag - Enable/Disable authentication Flag."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 1 }
|
||
|
|
|
||
|
|
hmAgentSnmpLinkUpDownTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the
|
||
|
|
entire switch. When set to Enable, the Link Up/Down traps will be
|
||
|
|
sent only if the Link Trap flag setting associated with the port
|
||
|
|
(Port Configuration Menu) is set to Enable.
|
||
|
|
"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 2 }
|
||
|
|
|
||
|
|
hmAgentSnmpMultipleUsersTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Multiple Users Flag - Enable/Disable Multiple User traps. When the value
|
||
|
|
is set to Enable, a Multiple User Trap is sent whenever someone logs in
|
||
|
|
to the terminal interface (EIA 232 or Telnet) and there is already an
|
||
|
|
existing terminal interface session.
|
||
|
|
"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 3 }
|
||
|
|
|
||
|
|
hmAgentSnmpSpanningTreeTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Spanning Tree Flag - This flag enables the sending of new root traps and
|
||
|
|
topology change notification traps."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 4 }
|
||
|
|
|
||
|
|
hmAgentSnmpBroadcastStormTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Broadcast Storm Flag - This flag enables or disables the broadcast
|
||
|
|
storm trap. You must also enable Broadcast Storm Recovery Mode
|
||
|
|
(see the Switch Configuration Menu). When this
|
||
|
|
value is set to Enable and Broadcast Storm Recovery mode is set to Enable,
|
||
|
|
the Broadcast Storm Start/End traps are sent when the switch enters and
|
||
|
|
leaves Broadcast Storm Recovery.
|
||
|
|
"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 5 }
|
||
|
|
|
||
|
|
hmAgentSnmpChassisTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Chassis Flag - Enable/Disable traps for
|
||
|
|
hmTemperatureTrap
|
||
|
|
hmModuleMapChange
|
||
|
|
hmPowerSupplyTrap
|
||
|
|
hmAutoconfigAdapterTrap
|
||
|
|
"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 6 }
|
||
|
|
|
||
|
|
hmAgentSnmpL2RedundancyTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Chassis Flag - Enable/Disable traps
|
||
|
|
hmRingRedReconfig and hmRingCplReconfig
|
||
|
|
"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 7 }
|
||
|
|
|
||
|
|
hmAgentSnmpPortSecurityTrapFlag OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"PortSecurity Flag - enable/disable all port security traps."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmAgentSnmpTrapFlagsConfigGroup 8 }
|
||
|
|
|
||
|
|
hmAgentSnmpCommunityMaxEntries OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max number of Entries in hmAgentSnmpCommunityConfigEntry"
|
||
|
|
::= { hmAgentSnmpConfigGroup 6 }
|
||
|
|
|
||
|
|
hmAgentSnmpTrapReceiverMaxEntries OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Max number of Entries in hmAgentSnmpTrapReceiverConfigEntry"
|
||
|
|
::= { hmAgentSnmpConfigGroup 7 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Power Over Ethernet Group --
|
||
|
|
--
|
||
|
|
hmPOEGroup OBJECT IDENTIFIER ::= { hmAgent 14 }
|
||
|
|
|
||
|
|
hmPOEGlobalGroup OBJECT IDENTIFIER ::= { hmPOEGroup 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Power Over Ethernet Global Group --
|
||
|
|
--
|
||
|
|
hmPOEStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables Power over Ethernet on this device.
|
||
|
|
The default value is enable."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmPOEGlobalGroup 1 }
|
||
|
|
|
||
|
|
hmPOEScanning OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables port scanning on this device.
|
||
|
|
The default value is enable."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmPOEGlobalGroup 2 }
|
||
|
|
|
||
|
|
hmPOEReservedPower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Reserved system power for active Power over Ethernet ports in Watts."
|
||
|
|
::= { hmPOEGlobalGroup 3 }
|
||
|
|
|
||
|
|
hmPOEFastStartup OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables Power over Ethernet on this device.
|
||
|
|
The default value is enable."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmPOEGlobalGroup 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Power Over Ethernet Port Group --
|
||
|
|
--
|
||
|
|
hmPOEPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPOEPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains variables for each Power over Ethernet interface of
|
||
|
|
the switch."
|
||
|
|
::= { hmPOEGroup 2 }
|
||
|
|
|
||
|
|
hmPOEPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPOEPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entry of the hmPOEPortTable."
|
||
|
|
INDEX
|
||
|
|
{ hmPOEPortIndex }
|
||
|
|
::= { hmPOEPortTable 1 }
|
||
|
|
|
||
|
|
HmPOEPortEntry ::= SEQUENCE {
|
||
|
|
hmPOEPortIndex Integer32,
|
||
|
|
hmPOEPortConsumptionPower Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPOEPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index to identify an Power over Ethernet interface."
|
||
|
|
::= { hmPOEPortEntry 1 }
|
||
|
|
|
||
|
|
hmPOEPortConsumptionPower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Measured usage power per interface expressed in Milliwatts."
|
||
|
|
::= { hmPOEPortEntry 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Power Over Ethernet Module Group --
|
||
|
|
--
|
||
|
|
hmPOEModuleTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPOEModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains objects for each plugged PoE+ module of
|
||
|
|
the switch. If the device is non-modular and supports PoE+ it
|
||
|
|
contains only one entry."
|
||
|
|
::= { hmPOEGroup 3 }
|
||
|
|
|
||
|
|
hmPOEModuleEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPOEModuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entries of the hmPOEModuleTable."
|
||
|
|
INDEX
|
||
|
|
{ hmPOEModuleIndex }
|
||
|
|
::= { hmPOEModuleTable 1 }
|
||
|
|
|
||
|
|
HmPOEModuleEntry ::= SEQUENCE {
|
||
|
|
hmPOEModuleIndex Integer32,
|
||
|
|
hmPOEModulePower Integer32,
|
||
|
|
hmPOEModuleMaximumPower Integer32,
|
||
|
|
hmPOEModuleReservedPower Integer32,
|
||
|
|
hmPOEModuleDeliveredPower Integer32,
|
||
|
|
hmPOEModuleUsageThreshold Integer32,
|
||
|
|
hmPOEModuleNotificationControlEnable INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPOEModuleIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Slot number of the plugged PoE+ module."
|
||
|
|
::= { hmPOEModuleEntry 1 }
|
||
|
|
|
||
|
|
hmPOEModulePower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Configurable power budget per module expressed in Watts. The default
|
||
|
|
value is hmPOEModuleMaximumPower and depends on the hardware."
|
||
|
|
::= { hmPOEModuleEntry 2 }
|
||
|
|
|
||
|
|
hmPOEModuleMaximumPower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum available power budget per module expressed in Watts. This
|
||
|
|
value depends on the device or module."
|
||
|
|
::= { hmPOEModuleEntry 3 }
|
||
|
|
|
||
|
|
hmPOEModuleReservedPower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The reserved power (depending on actual power classes)
|
||
|
|
per module expressed in Watts."
|
||
|
|
::= { hmPOEModuleEntry 4 }
|
||
|
|
|
||
|
|
hmPOEModuleDeliveredPower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured usage power per module expressed in Watts."
|
||
|
|
::= { hmPOEModuleEntry 5 }
|
||
|
|
|
||
|
|
hmPOEModuleUsageThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..99)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The usage power threshold per module expressed in percent.
|
||
|
|
If this threshold is exceeded a alarm is initiated."
|
||
|
|
DEFVAL { 90 }
|
||
|
|
::= { hmPOEModuleEntry 6 }
|
||
|
|
|
||
|
|
hmPOEModuleNotificationControlEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls, on a per-module basis, whether
|
||
|
|
or not notifications from the agent are enabled. "
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { hmPOEModuleEntry 7 }
|
||
|
|
|
||
|
|
-- **************************************************************************
|
||
|
|
-- * *
|
||
|
|
-- * Switch Resources including CPU, memory, network *
|
||
|
|
-- * *
|
||
|
|
-- **************************************************************************
|
||
|
|
hmSwitchResources OBJECT IDENTIFIER ::= { hmAgent 15 }
|
||
|
|
|
||
|
|
hmCpuResources OBJECT IDENTIFIER ::= { hmSwitchResources 2 }
|
||
|
|
hmMemoryResources OBJECT IDENTIFIER ::= { hmSwitchResources 3 }
|
||
|
|
hmNetworkResources OBJECT IDENTIFIER ::= { hmSwitchResources 4 }
|
||
|
|
|
||
|
|
hmEnableMeasurement OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable the resources measurement If disabled, the
|
||
|
|
task - needed for measurement - is also deleted."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { hmSwitchResources 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
-- C P U R E S O U R C E S
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
|
||
|
|
hmCpuUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
UNITS "percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current cpu utilization of the switch in percent."
|
||
|
|
|
||
|
|
::= { hmCpuResources 1 }
|
||
|
|
|
||
|
|
hmCpuAverageUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
UNITS "percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average cpu utilization of the switch in percent,
|
||
|
|
max. measured over the last 30 minutes."
|
||
|
|
|
||
|
|
::= { hmCpuResources 2 }
|
||
|
|
|
||
|
|
hmCpuRunningProcesses OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..32768)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current number of processes running."
|
||
|
|
|
||
|
|
::= { hmCpuResources 3 }
|
||
|
|
|
||
|
|
hmCpuMaxRunningProcesses OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..32768)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of processes running, max. since
|
||
|
|
the last 30 minutes."
|
||
|
|
|
||
|
|
::= { hmCpuResources 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
-- M E M O R Y R E S O U R C E S
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
|
||
|
|
hmMemoryAllocated OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
UNITS "kBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current allocated memory of the switch in kBytes."
|
||
|
|
|
||
|
|
::= { hmMemoryResources 1 }
|
||
|
|
|
||
|
|
hmMemoryFree OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
UNITS "kBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current free memory of the switch in kBytes."
|
||
|
|
|
||
|
|
::= { hmMemoryResources 2 }
|
||
|
|
|
||
|
|
hmMemoryAllocatedAverage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
UNITS "kBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average allocated memory of the switch in kBytes,
|
||
|
|
measured over the last 30 minutes."
|
||
|
|
|
||
|
|
::= { hmMemoryResources 3 }
|
||
|
|
|
||
|
|
hmMemoryFreeAverage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
UNITS "kBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average free memory of the switch in kBytes,
|
||
|
|
measured over the last 30 minutes."
|
||
|
|
|
||
|
|
::= { hmMemoryResources 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
-- N E T W O R K R E S O U R C E S
|
||
|
|
--
|
||
|
|
-- ***********************************************************
|
||
|
|
--
|
||
|
|
|
||
|
|
hmNetworkCpuIfUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
UNITS "precent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current network utilization of the internal cpu interface in percent."
|
||
|
|
|
||
|
|
::= { hmNetworkResources 1 }
|
||
|
|
|
||
|
|
hmNetworkCpuIfAverageUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
UNITS "precent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average network utilization of the internal cpu interface in percent,
|
||
|
|
measured over the last 30 minutes."
|
||
|
|
|
||
|
|
::= { hmNetworkResources 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Industrial Ethernet Protocols
|
||
|
|
--
|
||
|
|
-- Currently supported: ProfinetIO and EtherNet/IP
|
||
|
|
--
|
||
|
|
|
||
|
|
hmIndustrialEthernetProtocols OBJECT IDENTIFIER ::= { hmAgent 16 }
|
||
|
|
hmProfinetIOConfigGroup OBJECT IDENTIFIER ::= { hmIndustrialEthernetProtocols 1 }
|
||
|
|
hmProfinetIOStatisticsGroup OBJECT IDENTIFIER ::= { hmIndustrialEthernetProtocols 2 }
|
||
|
|
hmEthernetIPConfigGroup OBJECT IDENTIFIER ::= { hmIndustrialEthernetProtocols 3 }
|
||
|
|
hmEthernetIPStatisticsGroup OBJECT IDENTIFIER ::= { hmIndustrialEthernetProtocols 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- ProfinetIO
|
||
|
|
--
|
||
|
|
hmPNIOAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the ProfinetIO functionality
|
||
|
|
on this device.
|
||
|
|
If disabled(2), the ProfinetIO protocol is inactive,
|
||
|
|
but the ProfinetIO MIBs can be accessed.
|
||
|
|
The default value is disabled."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmProfinetIOConfigGroup 1 }
|
||
|
|
|
||
|
|
hmPNIODeviceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535) -- 0x0000..0xFFFF
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifier of the device family.
|
||
|
|
Values 1 .. 65635 are valid device IDs."
|
||
|
|
::= { hmProfinetIOConfigGroup 2 }
|
||
|
|
|
||
|
|
hmPNIOModuleIdentNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifier ID of the device of port or module."
|
||
|
|
::= { hmProfinetIOConfigGroup 3 }
|
||
|
|
|
||
|
|
|
||
|
|
hmPNIOOrderID OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..64))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Product (switch) order ID.
|
||
|
|
The size is restricted to 64 characters."
|
||
|
|
::= { hmProfinetIOConfigGroup 4 }
|
||
|
|
|
||
|
|
hmPNIODeviceTypeDetails OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Switch device type details, for example:
|
||
|
|
4 Port Rail Switch."
|
||
|
|
::= { hmProfinetIOConfigGroup 5 }
|
||
|
|
|
||
|
|
hmPNIOSoftwareRelease OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is a string that contains Version number of
|
||
|
|
software in profinetio format, for example: 01.0.03."
|
||
|
|
::= { hmProfinetIOConfigGroup 6 }
|
||
|
|
|
||
|
|
hmPNIOHardwareRelease OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Version number of switch hardware in profinetio format."
|
||
|
|
::= { hmProfinetIOConfigGroup 7 }
|
||
|
|
|
||
|
|
|
||
|
|
hmPNIOOrderID9th OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Product (switch) order ID.
|
||
|
|
The size is restricted to 32 characters
|
||
|
|
(In the form of the 9-th numbers)."
|
||
|
|
::= { hmProfinetIOConfigGroup 8 }
|
||
|
|
|
||
|
|
hmPNIODcpModeTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPNIODcpModeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of DCP mode entries"
|
||
|
|
::= { hmProfinetIOConfigGroup 10 }
|
||
|
|
|
||
|
|
hmPNIODcpModeEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPNIODcpModeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DCP mode entry"
|
||
|
|
INDEX {hmPNIODcpModePortID}
|
||
|
|
::= { hmPNIODcpModeTable 1 }
|
||
|
|
|
||
|
|
HmPNIODcpModeEntry ::= SEQUENCE {
|
||
|
|
hmPNIODcpModePortID INTEGER,
|
||
|
|
hmPNIODcpMode INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPNIODcpModePortID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (1..128)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port ID for the DCP mode table entry"
|
||
|
|
::= { hmPNIODcpModeEntry 1 }
|
||
|
|
|
||
|
|
hmPNIODcpMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(0),
|
||
|
|
ingress(1),
|
||
|
|
egress(2),
|
||
|
|
both(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DCP mode for one port.
|
||
|
|
Allowed values none(0), ingress(1), egress(2) or both(3) which is default."
|
||
|
|
::= { hmPNIODcpModeEntry 2 }
|
||
|
|
|
||
|
|
hmPNIONameOfStation OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..240))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Device name.
|
||
|
|
The size is restricted to 240 characters.
|
||
|
|
It must be conform to the restrictions
|
||
|
|
as decribed in PNIO protocol specification."
|
||
|
|
::= { hmProfinetIOConfigGroup 11 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- EtherNet/IP
|
||
|
|
--
|
||
|
|
|
||
|
|
hmEtherNetIPAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables the EtherNet/IP(TM) functionality
|
||
|
|
on this device.
|
||
|
|
If disabled(2), the EtherNet/IP protocol is deactivated,
|
||
|
|
but the EtherNet/IP MIBs can be accessed.
|
||
|
|
The default value is disabled."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { hmEthernetIPConfigGroup 1 }
|
||
|
|
|
||
|
|
hmEtherNetIPErrorCode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the error code within EtherNet/IP(TM) action.
|
||
|
|
"
|
||
|
|
::= { hmEthernetIPConfigGroup 2 }
|
||
|
|
|
||
|
|
hmEtherNetIPProductCode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535) -- 0x0000..0xFFFF
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the Product Code as shown in the Identity Object
|
||
|
|
of EtherNet/IP(TM). Values 1 .. 65635 are valid product codes."
|
||
|
|
::= { hmEthernetIPConfigGroup 3 }
|
||
|
|
|
||
|
|
hmEtherNetIPRevisionMajor OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..255) -- 0x01..0xFF
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the major revision number as shown in the Identity Object
|
||
|
|
of EtherNet/IP(TM). Values 1 .. 255 are valid revisions."
|
||
|
|
::= { hmEthernetIPConfigGroup 4 }
|
||
|
|
|
||
|
|
hmEtherNetIPRevisionMinor OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..255) -- 0x01..0xFF
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the minor revision number as shown in the Identity Object
|
||
|
|
of EtherNet/IP(TM). Values 1 .. 255 are valid revisions."
|
||
|
|
::= { hmEthernetIPConfigGroup 5 }
|
||
|
|
|
||
|
|
hmEtherNetIPProductName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the product name as shown in the Identity Object
|
||
|
|
of EtherNet/IP(TM). The size is restricted to 32 Characters."
|
||
|
|
::= { hmEthernetIPConfigGroup 6 }
|
||
|
|
|
||
|
|
hmEtherNetIPCatalogName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Read the catolog name as provided in the EDS file
|
||
|
|
for EtherNet/IP(TM). The size is restricted to 255 Characters."
|
||
|
|
::= { hmEthernetIPConfigGroup 7 }
|
||
|
|
|
||
|
|
hmEtherNetIPConnEstablished OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Statistics: number of connections that have been established
|
||
|
|
within EtherNet/IP."
|
||
|
|
::= { hmEthernetIPStatisticsGroup 1 }
|
||
|
|
|
||
|
|
hmEtherNetIPConnTimeouts OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Statistics: number of connection timeouts that have been occurred
|
||
|
|
within EtherNet/IP."
|
||
|
|
::= { hmEthernetIPStatisticsGroup 2 }
|
||
|
|
|
||
|
|
hmEtherNetIPVendorObjRequests OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Statistics: number of requests to the vendor specific objects
|
||
|
|
within EtherNet/IP."
|
||
|
|
::= { hmEthernetIPStatisticsGroup 3 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Agent / Login Group
|
||
|
|
--
|
||
|
|
|
||
|
|
hmAgentLoginGroup OBJECT IDENTIFIER ::= { hmAgent 17 }
|
||
|
|
|
||
|
|
hmAgentLoginBanner OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The text added in this variable by the user will be display in
|
||
|
|
the system login page as banner on every login into the CLI
|
||
|
|
(local or remote) or when login into the system web interface.
|
||
|
|
The default value is an empty string, which will not be displayed.
|
||
|
|
Special meaning have the sequences '\t' and '\n' which
|
||
|
|
allow the user to format the string with tabulator (t)
|
||
|
|
and newline (n) format instructions."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { hmAgentLoginGroup 1 }
|
||
|
|
|
||
|
|
hmPortMonitorGroup OBJECT IDENTIFIER ::= { hmAgent 18 }
|
||
|
|
|
||
|
|
hmPortMonitorAdminMode OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Global switch to enable / disable the port state actions,
|
||
|
|
which are performed if a condition becomes true"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmPortMonitorGroup 1 }
|
||
|
|
|
||
|
|
hmPortMonitorIntfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPortMonitorIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port state mode interface table."
|
||
|
|
::= { hmPortMonitorGroup 2 }
|
||
|
|
|
||
|
|
hmPortMonitorIntfEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPortMonitorIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port state mode interface entry."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { hmPortMonitorIntfTable 1 }
|
||
|
|
|
||
|
|
HmPortMonitorIntfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmPortMonitorIntfMode TruthValue,
|
||
|
|
hmPortMonitorIntfReset TruthValue,
|
||
|
|
hmPortMonitorIntfAction INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPortMonitorIntfMode OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port monitor interface mode."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmPortMonitorIntfEntry 1 }
|
||
|
|
|
||
|
|
hmPortMonitorIntfReset OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port monitor interface reset."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmPortMonitorIntfEntry 2 }
|
||
|
|
|
||
|
|
hmPortMonitorIntfAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
port-disable(1),
|
||
|
|
trap-only (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interface link disable state."
|
||
|
|
DEFVAL { port-disable }
|
||
|
|
::= { hmPortMonitorIntfEntry 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionGroup OBJECT IDENTIFIER ::= { hmPortMonitorGroup 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPortMonitorConditionIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port state condition interface table."
|
||
|
|
::= { hmPortMonitorConditionGroup 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionIntfEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPortMonitorConditionIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port state action interface entry."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { hmPortMonitorConditionTable 1 }
|
||
|
|
|
||
|
|
HmPortMonitorConditionIntfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmPortMonitorConditionLinkFlapMode TruthValue,
|
||
|
|
hmPortMonitorConditionCrcFragmentsMode TruthValue,
|
||
|
|
hmPortMonitorConditionField BITS
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapMode OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interface link flap mode."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmPortMonitorConditionIntfEntry 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsMode OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interface CrcFragments mode."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { hmPortMonitorConditionIntfEntry 2 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionField OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
none(0),
|
||
|
|
link-flap(1),
|
||
|
|
crcFragments(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Condition type field."
|
||
|
|
::= { hmPortMonitorConditionIntfEntry 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapGroup OBJECT IDENTIFIER ::= { hmPortMonitorConditionGroup 2 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..180)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Measure interval in seconds (1-180s) for link flap detection."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { hmPortMonitorConditionLinkFlapGroup 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..100)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Link flap counter (1-100)."
|
||
|
|
DEFVAL { 5 }
|
||
|
|
::= { hmPortMonitorConditionLinkFlapGroup 2 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapIntfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPortMonitorConditionLinkFlapIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port condition link flap interface table."
|
||
|
|
::= { hmPortMonitorConditionLinkFlapGroup 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapIntfEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPortMonitorConditionLinkFlapIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port condition link flap interface entry."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { hmPortMonitorConditionLinkFlapIntfTable 1 }
|
||
|
|
|
||
|
|
HmPortMonitorConditionLinkFlapIntfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmPortMonitorConditionLinkFlapCountInterval Integer32,
|
||
|
|
hmPortMonitorConditionLinkFlapCountTotal Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapCountInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Link flap count that occured in last interval."
|
||
|
|
::= { hmPortMonitorConditionLinkFlapIntfEntry 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionLinkFlapCountTotal OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Total link flap count."
|
||
|
|
::= { hmPortMonitorConditionLinkFlapIntfEntry 2 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsGroup OBJECT IDENTIFIER ::= { hmPortMonitorConditionGroup 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(5..180)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Measure interval in seconds (5-180s) for CrcFragments detection."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsGroup 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"CrcFragments counter (1-1000000)."
|
||
|
|
DEFVAL { 1000 }
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsGroup 2 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsIntfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HmPortMonitorConditionCrcFragmentsIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port condition CrcFragments interface table."
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsGroup 3 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsIntfEntry OBJECT-TYPE
|
||
|
|
SYNTAX HmPortMonitorConditionCrcFragmentsIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Port condition CrcFragments interface entry."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsIntfTable 1 }
|
||
|
|
|
||
|
|
HmPortMonitorConditionCrcFragmentsIntfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
hmPortMonitorConditionCrcFragmentsCountInterval Integer32,
|
||
|
|
hmPortMonitorConditionCrcFragmentsCountTotal Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsCountInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"CrcFragments count that occured in last interval."
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsIntfEntry 1 }
|
||
|
|
|
||
|
|
hmPortMonitorConditionCrcFragmentsCountTotal OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Total CrcFragments count."
|
||
|
|
::= { hmPortMonitorConditionCrcFragmentsIntfEntry 2 }
|
||
|
|
|
||
|
|
-- **************************************************************************
|
||
|
|
-- * *
|
||
|
|
-- * Notifications (Traps) *
|
||
|
|
-- * *
|
||
|
|
-- **************************************************************************
|
||
|
|
-- * *
|
||
|
|
-- * Following Traps are supported with enterprise = hmChassis *
|
||
|
|
-- * hmGroupMapChange (1) *
|
||
|
|
-- * hmPowerSupply (2) *
|
||
|
|
-- * hmFan (3) *
|
||
|
|
-- * hmSignallingRelay (4) *
|
||
|
|
-- * hmStandby (5) *
|
||
|
|
-- * hmSelftestError (6) *
|
||
|
|
-- * hmModuleMapChange (7) *
|
||
|
|
-- * hmBPDUGuardTrap (8) *
|
||
|
|
-- * hmSigConRelayChange (10) *
|
||
|
|
-- * hmSFPChangeTrap (11) *
|
||
|
|
-- * hmIfaceUtilizationTrap (12) *
|
||
|
|
-- * hmDevMonStateChangeTrap (13) *
|
||
|
|
-- * hmSFPRxPowerChangeTrap (14) *
|
||
|
|
-- * hmSysSelftestRebootOnErrorTrap (15) *
|
||
|
|
-- * *
|
||
|
|
-- * Following Traps are supported with enterprise = hmAgent *
|
||
|
|
-- * hmTemperatureTrap (1) *
|
||
|
|
-- * hmLoginTrap (2) *
|
||
|
|
-- * hmDuplicateStaticAddressTrap (3) *
|
||
|
|
-- * hmAutoconfigAdapterTrap (4) *
|
||
|
|
-- * hmRelayDuplicateIPTrap (5) *
|
||
|
|
-- * hmSNTPTrap (6) *
|
||
|
|
-- * hmNetACDNotification (7) *
|
||
|
|
-- * hmConfigurationSavedTrap (8) *
|
||
|
|
-- * hmConfigurationChangedTrap (9) *
|
||
|
|
-- * hmAddressRelearnDetectTrap (10) *
|
||
|
|
-- * hmDuplexMismatchTrap (11)
|
||
|
|
-- * hmPortMonitorPortDisableTrap (13) *
|
||
|
|
-- * hmPOEModulePowerUsageOffNotification (14) *
|
||
|
|
-- * hmPOEModulePowerUsageOffNotification (15) *
|
||
|
|
-- **************************************************************************
|
||
|
|
|
||
|
|
hmChassisEvent OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The events of hmChassis."
|
||
|
|
::= { hmChassis 0 }
|
||
|
|
|
||
|
|
hmAgentEvent OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The events of hmAgent."
|
||
|
|
::= { hmAgent 0 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Traps with enterprise = hmChassis
|
||
|
|
--
|
||
|
|
hmGroupMapChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSysGroupMap, hmNeighbourSlot, hmNeighbourIpAddress }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent when a change occurs in the group
|
||
|
|
structure of a switch. This occurs only when a
|
||
|
|
group is logically removed from or added to a switch.
|
||
|
|
The varBind list contains the updated value of the
|
||
|
|
hmSysGroupMap variable. hmNeighbourSlot identifies the
|
||
|
|
related slot. hmNeighbourIpAddress shows whether a group
|
||
|
|
was logically removed (0.0.0.0) or added (correct ipAddress)."
|
||
|
|
::= { hmChassisEvent 1 }
|
||
|
|
|
||
|
|
hmPowerSupply NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmPSState }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if the state of a power supply unit changes."
|
||
|
|
::= { hmChassisEvent 2 }
|
||
|
|
|
||
|
|
hmFan NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmFanState }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the value of hmFanCtrl changes."
|
||
|
|
::= { hmChassisEvent 3 }
|
||
|
|
|
||
|
|
hmSignallingRelay NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmRS2SigRelayState, hmSigTrapReason, hmSigReasonIndex }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the value of hmRS2SigRelayState changes its value.
|
||
|
|
Variables included in this trap are hmRS2SigRelayState, hmSigTrapReason,
|
||
|
|
hmSigReasonIndex."
|
||
|
|
::= { hmChassisEvent 4 }
|
||
|
|
|
||
|
|
hmStandby NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmRS2OperMode }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if the value of hmRS2OperMode changes."
|
||
|
|
::= { hmChassisEvent 5 }
|
||
|
|
|
||
|
|
hmSelftestError NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSelfTestCpuResult, hmSelfTestBBResult, hmSelfTestBPResult, hmSelfTestM1Result,
|
||
|
|
hmSelfTestM2Result, hmSelfTestM3Result, hmSelfTestM4Result }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if the value of one of the selftest
|
||
|
|
results is not zero or if a value changes while the
|
||
|
|
agent is running."
|
||
|
|
::= { hmChassisEvent 6 }
|
||
|
|
|
||
|
|
hmModuleMapChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSysGroupModuleMap }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent when a change occurs in the module
|
||
|
|
structure of a switch. This occurs only when a
|
||
|
|
module is logically removed from or added to a switch.
|
||
|
|
The varBind list contains the updated value of the
|
||
|
|
variable hmSysGroupModuleMap."
|
||
|
|
::= { hmChassisEvent 7 }
|
||
|
|
|
||
|
|
hmBPDUGuardTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmIfaceStpBpduGuardStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if on this port an BPDU guard
|
||
|
|
functionality is enabled (globally or only for this port)
|
||
|
|
and an (R)STP BPDU are received on this port. That means when
|
||
|
|
hmIfaceStpBpduGuardStatus is set to true(1) for this port.
|
||
|
|
Then IfAdminStatus for this port is set to down(2).
|
||
|
|
If needed, it must be changed by hand to up(1)"
|
||
|
|
::= { hmChassisEvent 8 }
|
||
|
|
|
||
|
|
|
||
|
|
hmSigConRelayChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSigConOperState, hmSigConTrapCause, hmSigConTrapCauseIndex }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the value of hmSigConOperState changes its value.
|
||
|
|
Variables included in this trap are hmSigConOperState, hmSigConTrapCause,
|
||
|
|
hmSigConTrapCauseIndex."
|
||
|
|
::= { hmChassisEvent 10 }
|
||
|
|
|
||
|
|
hmSFPChangeTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmIfaceGroupID, hmIfaceID }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent when a SFP has been added or removed.
|
||
|
|
It is also sent for an otherwise unsupported SFP."
|
||
|
|
::= { hmChassisEvent 11 }
|
||
|
|
|
||
|
|
hmIfaceUtilizationTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmIfaceUtilizationAlarmCondition, hmIfaceUtilization }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if the value of hmIfaceUtilization exceeds or
|
||
|
|
falls back below the interface untilization threshholds
|
||
|
|
hmIfaceUtilizationAlarmConditionThreshold and
|
||
|
|
hmIfaceUtilizationAlarmRemovalThreshold."
|
||
|
|
::= { hmChassisEvent 12 }
|
||
|
|
|
||
|
|
hmDevMonStateChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmDevMonSwitchState, hmDevMonTrapCause, hmDevMonTrapCauseIndex }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the value of hmDevMonSwitchState changes its value.
|
||
|
|
Variables included in this trap are hmDevMonSwitchState, hmDevMonTrapCause,
|
||
|
|
hmDevMonTrapCauseIndex."
|
||
|
|
::= { hmChassisEvent 13 }
|
||
|
|
|
||
|
|
hmSFPRxPowerChangeTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSfpRxPowerState }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent when the state of the rx power of a SFP changes."
|
||
|
|
::= { hmChassisEvent 14 }
|
||
|
|
|
||
|
|
hmSysSelftestRebootOnErrorTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSysSelftestRebootOnError }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent when the agent wants to reboot due to an internal circumstance."
|
||
|
|
::= { hmChassisEvent 15 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Traps with enterprise = hmAgent
|
||
|
|
--
|
||
|
|
hmTemperatureTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmTemperature, hmTempUprLimit, hmTempLwrLimit}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if the value of hmTemperature leaves or
|
||
|
|
enters the range of the agent temperature threshholds
|
||
|
|
hmTempUprLimit and hmTempLwrLimit."
|
||
|
|
::= { hmAgentEvent 1 }
|
||
|
|
|
||
|
|
hmLoginTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmLastIpAddr, hmLastCommunity }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if a user attemps to login via telnet
|
||
|
|
or serial connection. hmLastIpAddr contains the IP address of the
|
||
|
|
login request. the value is 0.0.0.0, if the request was sent via serial
|
||
|
|
connection. hmLastCommunity contains the used password. If the login was
|
||
|
|
successfull, '******' will be sent instead."
|
||
|
|
::= { hmAgentEvent 2 }
|
||
|
|
|
||
|
|
hmDuplicateStaticAddressTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { dot1dStaticAddress }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This trap is sent if a user attemps to set the same static unicast
|
||
|
|
address at more than one agent of a chassis"
|
||
|
|
::= { hmAgentEvent 3 }
|
||
|
|
|
||
|
|
hmAutoconfigAdapterTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmAutoconfigAdapterStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports a status change of the Autoconfiguration Adapter."
|
||
|
|
::= { hmAgentEvent 4 }
|
||
|
|
|
||
|
|
hmRelayDuplicateIPTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmRelayLastDuplicateIP }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports the detection of a duplicate ip address
|
||
|
|
by the relay agent."
|
||
|
|
::= { hmAgentEvent 5 }
|
||
|
|
|
||
|
|
hmSNTPTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmNetSNTPOperStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports SNTP error conditions. For a list of
|
||
|
|
possible error conditions refer to hmNetSNTPOperStatus."
|
||
|
|
::= { hmAgentEvent 6 }
|
||
|
|
|
||
|
|
hmNetACDNotification NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmNetACDTimeMark, hmNetACDAddrSubtype, hmNetACDAddr, hmNetACDMAC, hmNetACDIfId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports an address conflict detection."
|
||
|
|
::= { hmAgentEvent 7 }
|
||
|
|
|
||
|
|
hmConfigurationSavedTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmAutoconfigAdapterStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent after the configuration of the
|
||
|
|
agent was successfully saved."
|
||
|
|
::= { hmAgentEvent 8 }
|
||
|
|
|
||
|
|
hmConfigurationChangedTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmConfigurationStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the local and the running
|
||
|
|
configuration doesn't match."
|
||
|
|
::= { hmAgentEvent 9 }
|
||
|
|
|
||
|
|
hmAddressRelearnDetectTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmSysSwitchAddressRelearnThreshold }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if the relearn threshold is exceeded."
|
||
|
|
::= { hmAgentEvent 10 }
|
||
|
|
|
||
|
|
hmDuplexMismatchTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmIfaceGroupID, hmIfaceID }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap indicates a possible serious situation.
|
||
|
|
Check for duplex mismatch, or EMI, or too many cascaded hubs, or exceeded maximum distance at HDX port."
|
||
|
|
::= { hmAgentEvent 11 }
|
||
|
|
|
||
|
|
hmNTPTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmNetNTPStatusCode, hmNetNTPStatusText }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports NTP error conditions. For a list of
|
||
|
|
possible error conditions refer to hmNetNTPStatusCode."
|
||
|
|
::= { hmAgentEvent 12 }
|
||
|
|
|
||
|
|
hmPortMonitorPortDisabledTrap NOTIFICATION-TYPE
|
||
|
|
OBJECTS { ifIndex, hmPortMonitorConditionField }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent if a port has been disabled by port disable action by port monitor."
|
||
|
|
::= { hmAgentEvent 13 }
|
||
|
|
|
||
|
|
hmPOEModulePowerUsageOnNotification NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmPOEModuleIndex, hmPOEModuleDeliveredPower }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports POE error condition. This Notification
|
||
|
|
indicate PSE Threshold usage indication is on, the usage power
|
||
|
|
is above the threshold. At least 500 msec must elapse between
|
||
|
|
notifications being emitted by the same object instance."
|
||
|
|
::= { hmAgentEvent 14 }
|
||
|
|
|
||
|
|
hmPOEModulePowerUsageOffNotification NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmPOEModuleIndex, hmPOEModuleDeliveredPower }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap reports POE error condition. This Notification
|
||
|
|
indicate PSE Threshold usage indication is on, the usage power
|
||
|
|
is below the threshold. At least 500 msec must elapse between
|
||
|
|
notifications being emitted by the same object instance."
|
||
|
|
::= { hmAgentEvent 15 }
|
||
|
|
|
||
|
|
hmSysSelftestPortError NOTIFICATION-TYPE
|
||
|
|
OBJECTS { hmIfaceGroupID, hmIfaceID }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent when the agent wants to reboot due to Opal Workaround 4. It shows
|
||
|
|
that the specific port is in an error state and a device reboot is needed."
|
||
|
|
::= { hmAgentEvent 16 }
|
||
|
|
END
|