david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/hp/CPQSTDEQ-MIB

5800 lines
214 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ****************************************************************************
--
-- Standard PC equipment configuration
-- Management Information Base for SNMP Network Management
--
--
-- (C) Copyright 1992-2015 Hewlett Packard Enterprise Development LP
--
-- Hewlett Packard Enterprise Development LP shall not be liable for technical
-- or editorial errors or omissions contained herein. The information in
-- this document is provided "as is" without warranty of any kind and
-- is subject to change without notice. The warranties for HP products
-- are set forth in the express limited warranty statements
-- accompanying such products. Nothing herein should be construed as
-- constituting an additional warranty.
--
-- Confidential computer software. Valid license from HP required for
-- possession, use or copying. Consistent with FAR 12.211 and 12.212,
-- Commercial Computer Software, Computer Software Documentation, and
-- Technical Data for Commercial Items are licensed to the U.S.
-- Government under vendor's standard commercial license.
--
-- Refer to the READMIB.RDM file for more information about the
-- organization of the information in the Compaq Enterprise.
--
-- The Compaq Enterprise number is 232.
-- The ASN.1 prefix to, and including the Compaq Enterprise is:
-- 1.3.6.1.4.1.232
--
-- ****************************************************************************
CPQSTDEQ-MIB DEFINITIONS ::= BEGIN
IMPORTS
compaq FROM CPQHOST-MIB
Counter FROM RFC1155-SMI
Gauge FROM RFC1155-SMI
-- Gauge32 FROM SNMPv2-SMI
-- enterprises FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
sysName FROM RFC1213-MIB
cpqHoTrapFlags FROM CPQHOST-MIB;
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
cpqStdEquipment OBJECT IDENTIFIER ::= { compaq 1 }
cpqSeMibRev OBJECT IDENTIFIER ::= { cpqStdEquipment 1 }
cpqSeComponent OBJECT IDENTIFIER ::= { cpqStdEquipment 2 }
cpqSeInterface OBJECT IDENTIFIER ::= { cpqSeComponent 1 }
cpqSeProcessor OBJECT IDENTIFIER ::= { cpqSeComponent 2 }
cpqSeMemory OBJECT IDENTIFIER ::= { cpqSeComponent 3 }
cpqSeIsaCmos OBJECT IDENTIFIER ::= { cpqSeComponent 4 }
cpqSeEisaNvram OBJECT IDENTIFIER ::= { cpqSeComponent 5 }
cpqSeRom OBJECT IDENTIFIER ::= { cpqSeComponent 6 }
cpqSeKeyboard OBJECT IDENTIFIER ::= { cpqSeComponent 7 }
cpqSeVideo OBJECT IDENTIFIER ::= { cpqSeComponent 8 }
cpqSeSerialPort OBJECT IDENTIFIER ::= { cpqSeComponent 9 }
cpqSeParallelPort OBJECT IDENTIFIER ::= { cpqSeComponent 10 }
cpqSeFloppyDisk OBJECT IDENTIFIER ::= { cpqSeComponent 11 }
cpqSeFixedDisk OBJECT IDENTIFIER ::= { cpqSeComponent 12 }
cpqSePci OBJECT IDENTIFIER ::= { cpqSeComponent 13 }
cpqSePCCard OBJECT IDENTIFIER ::= { cpqSeComponent 14 }
cpqSeUSBPort OBJECT IDENTIFIER ::= { cpqSeComponent 15 }
cpqSeCell OBJECT IDENTIFIER ::= { cpqSeComponent 16 }
cpqSeIOC OBJECT IDENTIFIER ::= { cpqSeComponent 17 }
cpqSePartition OBJECT IDENTIFIER ::= { cpqSeComponent 18 }
cpqSeCabinet OBJECT IDENTIFIER ::= { cpqSeComponent 19 }
cpqSeComplex OBJECT IDENTIFIER ::= { cpqSeComponent 20 }
cpqSeLED OBJECT IDENTIFIER ::= { cpqSeComponent 21 }
cpqSeUSBDevice OBJECT IDENTIFIER ::= { cpqSeComponent 22 }
cpqSePCIeDisk OBJECT IDENTIFIER ::= { cpqSeComponent 23 }
cpqSeOsCommon OBJECT IDENTIFIER ::= { cpqSeInterface 4 }
TruthValue ::= INTEGER {
false(1),
true(2)
}
-- ****************************************************************************
-- Standard Equipment MIB Revision
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeMibRev Group (1.3.6.1.4.1.232.1.1)
--
-- Implementation of the cpqSeMibRev group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- An Insight Agent conforming to this document will return a
-- cpqSeMibRevMajor of one (1) and a cpqSeMibRevMinor of thirty-one (33).
--
-- ****************************************************************************
cpqSeMibRevMajor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Major Revision level of the MIB.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
::= { cpqSeMibRev 1 }
cpqSeMibRevMinor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Minor Revision level of the MIB.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
::= { cpqSeMibRev 2 }
cpqSeMibCondition OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The overall condition.
This object represents the overall status of the server
represented by this MIB."
::= { cpqSeMibRev 3 }
-- ****************************************************************************
-- Standard Equipment OS Common Group
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeInterface Group (1.3.6.1.4.1.232.1.2.1)
-- cpqSeOsCommon Group (1.3.6.1.4.1.232.1.2.1.4)
--
-- Implementation of the cpqSeOsCommon group is mandatory for all
-- agents that support the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeOsCommonPollFreq OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Insight Agent's polling frequency.
The frequency, in seconds, at which the Insight Agent requests
information from the device driver. A frequency of zero (0)
indicates that the Insight Agent retrieves the information upon
request of a management station, it does not poll the device
driver at a specific interval.
If the poll frequency is zero (0) all attempts to write to this
object will fail. If the poll frequency is non-zero,
setting this value will change the polling frequency of the
Insight Agent. Setting the poll frequency to zero (0) will
always fail, an agent may also choose to fail any request to
change the poll frequency to a value that would severely impact
system performance."
::= { cpqSeOsCommon 1 }
-- ****************************************************************************
-- Standard Equipment OS Common Module Table
-- =========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeInterface Group (1.3.6.1.4.1.232.1.2.1)
-- cpqSeOsCommon Group (1.3.6.1.4.1.232.1.2.1.4)
-- cpqSeOsCommonModuleTable (1.3.6.1.4.1.232.1.2.1.4.2) deprecated
--
-- ***************************************************************************
cpqSeOsCommonModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of software modules that provide an interface to the
device this MIB describes."
::= { cpqSeOsCommon 2 }
cpqSeOsCommonModuleEntry OBJECT-TYPE
SYNTAX CpqSeOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a software module that provides an interface
to the device this MIB describes."
INDEX { cpqSeOsCommonModuleIndex }
::= { cpqSeOsCommonModuleTable 1 }
CpqSeOsCommonModuleEntry ::= SEQUENCE {
cpqSeOsCommonModuleIndex INTEGER,
cpqSeOsCommonModuleName DisplayString,
cpqSeOsCommonModuleVersion DisplayString,
cpqSeOsCommonModuleDate OCTET STRING,
cpqSeOsCommonModulePurpose DisplayString
}
cpqSeOsCommonModuleIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A unique index for this module description."
::= { cpqSeOsCommonModuleEntry 1 }
cpqSeOsCommonModuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module name."
::= { cpqSeOsCommonModuleEntry 2 }
cpqSeOsCommonModuleVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module version in XX.YY format.
Where XX is the major version number and YY is the minor version
number. This field will be a null (size 0) string if the agent
cannot provide the module version."
::= { cpqSeOsCommonModuleEntry 3 }
cpqSeOsCommonModuleDate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module date.
field octets contents range
===== ====== ======= =====
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minute 0..59
6 7 second 0..60
(use 60 for leap-second)
This field will be set to year = 0 if the agent cannot provide
the module date. The hour, minute, and second field will be set
to zero (0) if they are not relevant. The year field is set
with the most significant octet first."
::= { cpqSeOsCommonModuleEntry 4 }
cpqSeOsCommonModulePurpose OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The purpose of the module described in this entry."
::= { cpqSeOsCommonModuleEntry 5 }
-- ****************************************************************************
-- Standard Equipment Processor Group
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeProcessor Group (1.3.6.1.4.1.232.1.2.2)
-- cpqSeCpuTable (1.3.6.1.4.1.232.1.2.2.1)
-- cpqSeFpuTable (1.3.6.1.4.1.232.1.2.2.2)
--
-- The cpqSeProcessor group describes the CPUs (central processor
-- units) and FPUs (floating point coprocessor units) in the system.
--
-- A CPU is a chip that performs general purpose processing. A CPU may
-- be used with or without an FPU.
--
-- A FPU is a chip that performs special purpose processing, an FPU is
-- used by a CPU to handle special computations. A FPU is always used
-- with a CPU.
--
-- The cpqSeProcessor group contains two tables, the cpqSeCpu table
-- and the cpqSeFpu table. The cpqSeCpu table has an entry for
-- each CPU in the system. The cpqSeFpu table has an entry for each
-- FPU in the system. The two tables are indexed in a way that enables
-- an application to determine the relationship between CPUs and FPUs.
-- Each CPU and FPU entry provides identification, description, and
-- speed information.
--
--
-- ****************************************************************************
cpqSeCpuTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeCpuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the CPUs (processors) in the system.
The main processor (if such a concept is valid for this machine)
should be the first entry in the table."
::= { cpqSeProcessor 1 }
cpqSeCpuEntry OBJECT-TYPE
SYNTAX CpqSeCpuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a CPU (processor) in the system."
INDEX { cpqSeCpuUnitIndex }
::= { cpqSeCpuTable 1 }
CpqSeCpuEntry ::= SEQUENCE {
cpqSeCpuUnitIndex INTEGER,
cpqSeCpuSlot INTEGER,
cpqSeCpuName DisplayString,
cpqSeCpuSpeed INTEGER,
cpqSeCpuStep INTEGER,
cpqSeCpuStatus INTEGER,
cpqSeCpuExtSpeed INTEGER,
cpqSeCpuDesigner INTEGER,
cpqSeCpuSocketNumber INTEGER,
cpqSeCpuThreshPassed INTEGER,
cpqSeCpuHwLocation DisplayString,
cpqSeCpuCellTablePtr INTEGER,
cpqSeCpuPowerpodStatus INTEGER,
cpqSeCpuArchitectureRevision DisplayString,
cpqSeCpuCore INTEGER,
cpqSeCPUSerialNumber DisplayString,
cpqSeCPUPartNumber DisplayString,
cpqSeCPUSerialNumberMfgr DisplayString,
cpqSeCPUPartNumberMfgr DisplayString,
cpqSeCPUCoreIndex INTEGER,
cpqSeCPUMaxSpeed INTEGER,
cpqSeCPUCoreThreadIndex INTEGER,
cpqSeCPUChipGenerationName DisplayString,
cpqSeCPUMultiThreadStatus INTEGER,
cpqSeCPUCoreMaxThreads INTEGER,
cpqSeCpuLowPowerStatus INTEGER,
cpqSeCpuPrimary INTEGER,
cpqSeCpuCoreSteppingText DisplayString,
cpqSeCpuCurrentPerformanceState INTEGER,
cpqSeCpuMinPerformanceState INTEGER,
cpqSeCpuMaxPerformanceState INTEGER
}
cpqSeCpuUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a number that uniquely specifies a processor unit.
A processing unit may be a set of processing chips that are
on the same board or for other reasons work together as a unit.
The main processor unit (if such a concept is valid for this
machine) will always have the lowest (first) index."
::= { cpqSeCpuEntry 1 }
cpqSeCpuSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value represents this processor's slot.
If the slot cannot be determined the value of zero (0) will be
returned."
::= { cpqSeCpuEntry 2 }
cpqSeCpuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of this processor.
For example:
80386"
::= { cpqSeCpuEntry 3 }
cpqSeCpuSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current internal speed of this processor in megahertz.
This changes as per the processor performance state
Zero will be returned if this value is not available."
::= { cpqSeCpuEntry 4 }
cpqSeCpuStep OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This step of the processor.
This will be zero (0) if the step cannot be determined."
::= { cpqSeCpuEntry 5 }
cpqSeCpuStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4),
disabled(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the processor.
The following values are valid for CPU status:
Unknown (1)
The status of the CPU could not be determined.
OK (2)
The CPU is functioning normally.
Degraded (3)
The CPU is in a pre-failure warrantee state.
Failed (4)
The CPU is in a failed state.
Disabled (5)
The CPU has been disabled during power-on-self-test."
::= { cpqSeCpuEntry 6 }
cpqSeCpuExtSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the external frequency in megahertz of the processor bus.
Zero will be returned if this value is not available."
::= { cpqSeCpuEntry 7 }
cpqSeCpuDesigner OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
intel(2),
amd(3),
cyrix(4),
ti(5),
nexgen(6),
compaq(7),
samsung(8),
mitsubishi(9),
mips(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the manufacturer which designs
this CPU."
::= { cpqSeCpuEntry 8 }
cpqSeCpuSocketNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical socket number of the CPU chip. This number
helps to identify CPUs on processor boards that contain
multiple CPU chips. In most cases the CPU Socket number
should be specified on the board silkscreen or in product
documentation."
::= { cpqSeCpuEntry 9 }
cpqSeCpuThreshPassed OBJECT-TYPE
SYNTAX INTEGER
{
unsupported(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU threshold passed (Exceeded). When this attribute is set
to true, it identifies a pre-failure error condition. Processors
like the Intel Pentium Pro have the capability built into them
to correct internal error conditions. Excessive corrected internal
errors can predict future hard processor failures. Agent
instrumentation will set this attribute to true if an internal
processor error threshold is passed. It is recommended that the
user replace the CPU in this case. If the processor does not
support monitoring internal corrected errors, this value will
be set to unsupported. "
::= { cpqSeCpuEntry 10 }
cpqSeCpuHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the CPU.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeCpuEntry 11 }
cpqSeCpuCellTablePtr OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the index for the cell in cpqSeCellTable where this CPU is physically located."
::= { cpqSeCpuEntry 12 }
cpqSeCpuPowerpodStatus OBJECT-TYPE
SYNTAX INTEGER
{
notfailed(1),
failed(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the status of CPU power pod. Potential values in the future could be present/not present."
::= { cpqSeCpuEntry 13 }
cpqSeCpuArchitectureRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the CPU architecture revision."
::= { cpqSeCpuEntry 14 }
cpqSeCpuCore OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of cores in this CPU module. Zero will be returned if can not be determined."
::= { cpqSeCpuEntry 15 }
cpqSeCPUSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The OEM serial number of the CPU."
::= { cpqSeCpuEntry 16 }
cpqSeCPUPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The OEM part number of the CPU."
::= { cpqSeCpuEntry 17 }
cpqSeCPUSerialNumberMfgr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The manufacturer serial number of the CPU."
::= { cpqSeCpuEntry 18 }
cpqSeCPUPartNumberMfgr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The manufacturer part number of the CPU."
::= { cpqSeCpuEntry 19 }
cpqSeCPUCoreIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a number that uniquely identifies a core in a CPU unit."
::= { cpqSeCpuEntry 20 }
cpqSeCPUMaxSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the maximum internal speed in megahertz this processor can support.
Zero will be returned if this value is not available."
::= { cpqSeCpuEntry 21 }
cpqSeCPUCoreThreadIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is an unique number to identify the running threads in a CPU core."
::= { cpqSeCpuEntry 22 }
cpqSeCPUChipGenerationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"CPU chip generation name e.g. Hondo, Montecito, Madison, Opteron."
::= { cpqSeCpuEntry 23 }
cpqSeCPUMultiThreadStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
enabled(2),
disabled(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID identifies whether the CPU threading is enabled or not."
::= { cpqSeCpuEntry 24 }
cpqSeCPUCoreMaxThreads OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID indicates the maximum number of threads that a cpu core is capable of."
::= { cpqSeCpuEntry 25 }
cpqSeCpuLowPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
lowpowered (2),
normalpowered (3),
highpowered (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Servers like Itanium has capability to lower power supply
to CPU if it is idle for specified period of time. Proliant
servers can set to high/low/Dynamic mode of power through
ILO.
The following values are valid for CPU Low Powered state:
Unknown (1)
The Low Powered status could not be determined.
Low Powered (2)
The CPU is Low Power state.
Normal Powered (3)
The CPU is normal Power state.
High Powered (4)
The CPU is High Power state."
::= { cpqSeCpuEntry 26 }
cpqSeCpuPrimary OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
false(2),
true (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On SMP systems one of the CPU is set to Primary and the
other CPUs as secondary. A value of true is set if the
CPU is primary.
The following values are valid for CPU availability status:
Unknown (1)
The CPU Primary/Secondary could not be determined.
false (2)
The CPU is not primary CPU.
True (3)
The CUR is primary CPU."
::= { cpqSeCpuEntry 27 }
cpqSeCpuCoreSteppingText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The processor stepping version string. A NULL string
indicates that the stepping could not be determined."
::= { cpqSeCpuEntry 28 }
cpqSeCpuCurrentPerformanceState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID returns the current performance state of this processor.
Processor performance states are denoted as Pn states. The value
of n is cpqSeCpuPerformanceState. The higher the value n is, the
lower the performance state is being used. Value 0 describes the
highest performance state, in which the processor uses its maximum
performance capability and may consume maximum power.
The performance state number should not exceed 16 on Itanium servers.
(-1) will be returned if this value is not available."
::= { cpqSeCpuEntry 29 }
cpqSeCpuMinPerformanceState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID returns the minimum performance state set for this processor.
(-1) will be returned if this value is not available."
::= { cpqSeCpuEntry 30 }
cpqSeCpuMaxPerformanceState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID returns the maximum performance state set for this processor.
(-1) will be returned if this value is not available."
::= { cpqSeCpuEntry 31 }
-- ****************************************************************************
-- The FPU Table
-- ****************************************************************************
cpqSeFpuTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeFpuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the FPUs (floating point coprocessors) in the system."
::= { cpqSeProcessor 2 }
cpqSeFpuEntry OBJECT-TYPE
SYNTAX CpqSeFpuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a FPU in the system.
The fpuUnitIndex of any entry in this table will equal the
cpuUnitIndex of the corresponding CPU in the cpqSeCpu table."
INDEX { cpqSeFpuUnitIndex , cpqSeFpuChipIndex }
::= { cpqSeFpuTable 1 }
CpqSeFpuEntry ::= SEQUENCE {
cpqSeFpuUnitIndex INTEGER,
cpqSeFpuChipIndex INTEGER,
cpqSeFpuSlot INTEGER,
cpqSeFpuName DisplayString,
cpqSeFpuSpeed INTEGER,
cpqSeFpuType INTEGER,
cpqSeFpuHwLocation DisplayString
}
cpqSeFpuUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a number that uniquely specifies a processor unit.
A processing unit may be a set of processing chips that are
on the same board or for other reasons work together as a unit.
The main processor unit (if there is one) will always have the
lowest (first) index. This field can be used to associate
CPUs with their corresponding FPUs."
::= { cpqSeFpuEntry 1 }
cpqSeFpuChipIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a number that uniquely specifies the FPU chip.
This field is used to distinguish between multiple FPUs that are
part of the same processor unit. For example, If a processor
board contained a Intel 80386 processor with both a Intel 80387
and a Weitek 3167, both the 80387 and the 3167 would have the
same fpuUnitIndex (which would match the 80386's cpuUnitIndex)
but the 80387 and the 3167 would have different fpuChipIndex
field values."
::= { cpqSeFpuEntry 2 }
cpqSeFpuSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the FPU's slot.
If the slot cannot be determined the value of zero (0) will
be returned."
::= { cpqSeFpuEntry 3 }
cpqSeFpuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the name of the FPU.
For example:
80387
Weitek 3167"
::= { cpqSeFpuEntry 4 }
cpqSeFpuSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is speed in megahertz of the FPU.
Zero will be returned if this value is not available."
::= { cpqSeFpuEntry 5 }
cpqSeFpuType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
embedded(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the FPU this entry is describing
is embedded in the CPU or external to the CPU chip."
::= { cpqSeFpuEntry 6 }
cpqSeFpuHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the FPU.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeFpuEntry 7 }
-- ****************************************************************************
-- Standard Equipment CPU Cache Table
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeProcessor Group (1.3.6.1.4.1.232.1.2.2)
-- cpqSeCpuCacheTable (1.3.6.1.4.1.232.1.2.2.3)
--
-- ****************************************************************************
cpqSeCpuCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeCpuCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the CPU caches in the system."
::= { cpqSeProcessor 3 }
cpqSeCpuCacheEntry OBJECT-TYPE
SYNTAX CpqSeCpuCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a CPU Caches in the system."
INDEX { cpqSeCpuCacheUnitIndex, cpqSeCpuCacheLevelIndex }
::= { cpqSeCpuCacheTable 1 }
CpqSeCpuCacheEntry ::= SEQUENCE {
cpqSeCpuCacheUnitIndex INTEGER,
cpqSeCpuCacheLevelIndex INTEGER,
cpqSeCpuCacheSize INTEGER,
cpqSeCpuCacheSpeed INTEGER,
cpqSeCpuCacheStatus INTEGER,
cpqSeCpuCacheWritePolicy INTEGER,
cpqSeCpuCacheHwLocation DisplayString,
cpqSeCpuCacheCpuSlot INTEGER,
cpqSeCpuCacheCpuCoreIndex INTEGER
}
cpqSeCpuCacheUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a number that uniquely specifies a processor unit.
A processing unit may be a set of processing chips that are
on the same board or for other reasons work together as a unit.
The main processor unit (if such a concept is valid for this
machine) will always have the lowest (first) index."
::= { cpqSeCpuCacheEntry 1 }
cpqSeCpuCacheLevelIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the processor cache level.
The lower the processor cache level, the closer the cache is to
the processor."
::= { cpqSeCpuCacheEntry 2 }
cpqSeCpuCacheSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the cache in kilobytes."
::= { cpqSeCpuCacheEntry 3 }
cpqSeCpuCacheSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is speed in cache memory in nanoseconds (ns). A value of
zero (0) means that the cache speed is unknown or unobtainable."
::= { cpqSeCpuCacheEntry 4 }
cpqSeCpuCacheStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the cache unit. If the cache is optional and not
installed, unknown(1) will be returned."
::= { cpqSeCpuCacheEntry 5 }
cpqSeCpuCacheWritePolicy OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
write-through(2),
write-back(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies write policy of this cache entry."
::= { cpqSeCpuCacheEntry 6 }
cpqSeCpuCacheHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the CPU cache.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeCpuCacheEntry 7 }
cpqSeCpuCacheCpuSlot OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the CPU Slot associated with this CPU cache."
::= { cpqSeCpuCacheEntry 8 }
cpqSeCpuCacheCpuCoreIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a unique number that identifies the core in the CPU
slot to which this cache is associated. If the cache is not
associated with any core on a multi-core CPU, the value should be -1."
::= { cpqSeCpuCacheEntry 9 }
-- ****************************************************************************
-- Standard Equipment CPU Condition
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeProcessor Group (1.3.6.1.4.1.232.1.2.2)
-- cpqSeCpuCondition (1.3.6.1.4.1.232.1.2.2.4)
--
-- ****************************************************************************
cpqSeCpuCondition OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value specifies the overall condition of the
processor sub-system."
::= { cpqSeProcessor 4 }
-- ****************************************************************************
-- Standard Equipment Memory Group
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeMemory Group (1.3.6.1.4.1.232.1.2.3)
--
-- The cpqSeMemory group provides the base memory in the system and the
-- total memory in the system.
--
-- Implementation of the cpqSeMemory group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeBaseMem OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of base memory in kilobytes.
A kilobyte is 1024 bytes."
::= { cpqSeMemory 1 }
cpqSeTotalMem OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total amount of memory in kilobytes.
A kilobyte is 1024 bytes."
::= { cpqSeMemory 2 }
cpqSeTotalMemMB OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total amount of memory in megabytes.
A megabyte is 1024 kilobytes."
::= { cpqSeMemory 3 }
-- ****************************************************************************
-- Standard Equipment ISA CMOS Group
-- =================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeIsaCmos Group (1.3.6.1.4.1.232.1.2.4)
--
--
-- The ISA CMOS group provides an image of the ISA CMOS real time clock,
-- security, and configuration in a raw form. This group is provided for
-- completeness, most of the important information stored in ISA CMOS can
-- also be found elsewhere in the MIB.
--
-- Implementation of the ISA CMOS group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeIsaCmosRaw OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The contents of the ISA CMOS."
::= { cpqSeIsaCmos 1 }
-- ****************************************************************************
-- Standard Equipment EISA NVRAM Slot Table
-- ========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
--
--
-- The EISA NVRAM group provides a set of tables that detail the
-- configuration information stored in an EISA bus architecture system.
-- The EISA slot table contains entries providing information about each
-- slot that currently contains a configured card.
-- The EISA function table contains entries providing information about
-- each function performed by a configured card. Each card may have
-- one or more defined functions.
-- The rest of the tables: the EISA memory table, the EISA Interrupt
-- table, the EISA DMA table, and the EISA port table, detail the
-- resources used by each function of each configured card.
--
-- Implementation of the eisaNvram group is optional.
-- The eisaNvram group should be included on any system with an EISA bus
-- architecture.
--
-- ****************************************************************************
cpqSeEisaSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA slot information entries."
::= { cpqSeEisaNvram 1 }
cpqSeEisaSlotEntry OBJECT-TYPE
SYNTAX CpqSeEisaSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA slot."
INDEX { cpqSeEisaSlotIndex }
::= { cpqSeEisaSlotTable 1 }
CpqSeEisaSlotEntry ::= SEQUENCE {
cpqSeEisaSlotIndex INTEGER,
cpqSeEisaSlotRaw OCTET STRING,
cpqSeEisaSlotBoardId DisplayString,
cpqSeEisaSlotBoardName DisplayString,
cpqSeEisaSlotCfRev DisplayString,
cpqSeEisaSlotType INTEGER
}
cpqSeEisaSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number for this entry describes."
::= { cpqSeEisaSlotEntry 1 }
cpqSeEisaSlotRaw OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (12))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot data for the board in this slot.
This octet string contains the following EISA slot information:
The first octet will be zero (0) if this slot contains a
properly configured board. Any other value indicates that the
EISA configuration information for this board is invalid or an
error occurred when trying to retrieve the information.
The second octet contains several bit flags about the product ID
and slot type.
Bit 7: 0 = No duplicate ID
1 = Duplicate IDs
Bit 6: 0 = Product ID readable
1 = Product ID not readable
Bit 5,4: 00 = Expansion slot
01 = Embedded device
10 = Virtual device
11 = Reserved
Bit 3..0: This nibble indicates which CFG file is loaded
when duplicate file names are present.
0000 = No duplicate ID
0001 = First duplicate ID
0010 = Second duplicate ID
0011 = Third duplicate ID
.
.
.
1111 = Fifteenth duplicate ID
NOTE: Bit 7 is the most significant bit, bit 0 is the least
significant.
The third octet contains the major revision level of the
configuration utility.
The fourth octet contains the minor revision level of the
configuration utility.
The fifth octet contains the most significant byte of the
configuration file checksum.
The sixth octet contains the least significant byte of the
configuration file checksum.
The seventh octet contains the number of device functions defined
for the board in this slot.
The eighth octet contains the combined function information.
This is a set of flags. Each bit has the following meaning when
set (1):
Bit 7: reserved (0)
Bit 6: slot has one or more free form data entries
Bit 5: slot has one or more port initialization entries.
Bit 4: slot has one or more port range entries.
Bit 3: slot has one or more DMA entries.
Bit 2: slot has one or more interrupt (IRQ) entries.
Bit 1: slot has one or more memory entries.
Bit 0: slot has one or more function type definitions.
NOTE: bit 7 is the most significant bit, bit 0 is the least
significant.
The ninth, tenth, eleventh, and twelfth octets contain the four
byte compressed EISA ID.
For more information about the meaning of this information
consult the EISA Technical Reference Guide."
::= { cpqSeEisaSlotEntry 2 }
cpqSeEisaSlotBoardId OBJECT-TYPE
SYNTAX DisplayString (SIZE (7))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A seven character board ID.
The first three characters are the manufacturers ID followed by
three character product ID followed by a one character revision
level."
::= { cpqSeEisaSlotEntry 3 }
cpqSeEisaSlotBoardName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product name (or other suitable description) of this board.
This field may be empty if no descriptive information is known
about the board."
::= { cpqSeEisaSlotEntry 4 }
cpqSeEisaSlotCfRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The revision level of the EISA configuration utility that was
used to configure the system.
This should be the same version information displayed by the EISA
configuration utility."
::= { cpqSeEisaSlotEntry 5 }
cpqSeEisaSlotType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
isa8Bit(2),
isa16Bit(3),
eisa32Bit(4),
eisaBusMaster32Bit(5),
other(6),
reserved(7),
reserved2(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of slot described by this entry."
::= { cpqSeEisaSlotEntry 6 }
-- ****************************************************************************
-- Standard Equipment EISA NVRAM Function Table
-- ============================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
--
-- ****************************************************************************
cpqSeEisaFunctTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaFunctEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list EISA function information entries."
::= { cpqSeEisaNvram 2 }
cpqSeEisaFunctEntry OBJECT-TYPE
SYNTAX CpqSeEisaFunctEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function."
INDEX { cpqSeEisaFunctSlotIndex , cpqSeEisaFunctIndex }
::= { cpqSeEisaFunctTable 1 }
CpqSeEisaFunctEntry ::= SEQUENCE {
cpqSeEisaFunctSlotIndex INTEGER,
cpqSeEisaFunctIndex INTEGER,
cpqSeEisaFunctStatus INTEGER,
cpqSeEisaFunctType DisplayString,
cpqSeEisaFunctCfgRev DisplayString,
cpqSeEisaFunctSels OCTET STRING,
cpqSeEisaFunctInfo INTEGER
}
cpqSeEisaFunctSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot of the board that registered this function"
::= { cpqSeEisaFunctEntry 1 }
cpqSeEisaFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the function this entry describes."
::= { cpqSeEisaFunctEntry 2 }
cpqSeEisaFunctStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
enabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the function described by this entry."
::= { cpqSeEisaFunctEntry 3 }
cpqSeEisaFunctType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the function.
The type may be followed by one or more subtype description
fields. Some currently defined types are:
Type Meaning
============== ==================================================
COM Communication device
COM,ASY ISA compatible 8250 based serial port
COM,ASY,FIFO ISA compatible 16550 based serial port (with fifo)
COM,SYN ISA compatible SDLC port
CPU Microprocessor
CPU,8086 8086 compatible microprocessor
CPU,80286 80286 compatible microprocessor
CPU,80386SX 80386SX compatible microprocessor
CPU,80386 80386 compatible microprocessor
CPU,80486 80486 compatible microprocessor
JOY ISA compatible joystick adapter
KEY Keyboard
KEY,nnn,KBD=xx Standard keyboard with nnn keys for country xx
MEM Memory board
MFC Multifunction board
MSD Mass storage device
MSD,DSKCTL ISA compatible fixed disk controller
MSD,FPYCTL ISA compatible floppy disk controller
MSD,TAPCTL Primary tape controller
NET Network board
NPX Numeric coprocessor
NPX,287 Intel 287 numeric coprocessor
NPX,387 Intel 387 numeric coprocessor
NPX,387SX Intel 387SX numeric coprocessor
NPX,W1167 Weitek 1167 numeric coprocessor
NPX,W3167 Weitek 3167 numeric coprocessor
OSE Operating system/environment
OTH Other
PAR ISA compatible parallel port
PAR,BID Bidirectional parallel port
PTR Pointing device
PTR,8042 8042 pointing device (mouse) interface
SYS System board
VID Video board
VID,MDA ISA compatible monochrome adapter
VID,MDA,MGA Hercules monochrome adapter
VID,CGA CGA, no write sync during retrace required
VID,CGA,RTR CGA, write sync during retrace required
VID,EGA ISA compatible EGA adapter
VID,VGA ISA compatible VGA adapter
This list is not intended to be complete. Other types may be
found in this field. This list describes some of the more
common types found, other types should be similarly recognizable
to someone sufficiently knowledgeable about computer hardware."
::= { cpqSeEisaFunctEntry 4 }
cpqSeEisaFunctCfgRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The revision of the EISA configuration .OVL file used to
configure this board."
::= { cpqSeEisaFunctEntry 5 }
cpqSeEisaFunctSels OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..26))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The selections that were chosen with the EISA CONFIGURATION
UTILITY to create this function."
::= { cpqSeEisaFunctEntry 6 }
cpqSeEisaFunctInfo OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA function information block.
This is a set of flags indicating the resources that are
configured in this EISA function. Each bit has the following
meaning when it is set (1):
Bit 7: Function is disabled
Bit 6: This function contains free-form information.
Bit 5: This function contains port initialization entries.
Bit 4: This function contains port range entries.
Bit 3: This function contains DMA entries.
Bit 2: This function contains interrupt (IRQ) entries.
Bit 1: This function contains memory entries.
Bit 0: This function contains function type definitions.
NOTE: bit 7 is the most significant bit, bit 0 is the least
significant."
::= { cpqSeEisaFunctEntry 7 }
-- ****************************************************************************
-- Standard Equipment EISA Memory Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
--
-- ****************************************************************************
cpqSeEisaMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaMemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function memory configuration entries."
::= { cpqSeEisaNvram 3 }
cpqSeEisaMemEntry OBJECT-TYPE
SYNTAX CpqSeEisaMemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function memory configuration."
INDEX { cpqSeEisaMemSlotIndex , cpqSeEisaMemFunctIndex ,
cpqSeEisaMemAllocIndex }
::= { cpqSeEisaMemTable 1 }
CpqSeEisaMemEntry ::= SEQUENCE {
cpqSeEisaMemSlotIndex INTEGER,
cpqSeEisaMemFunctIndex INTEGER,
cpqSeEisaMemAllocIndex INTEGER,
cpqSeEisaMemStartAddr INTEGER,
cpqSeEisaMemSize INTEGER,
cpqSeEisaMemShare INTEGER,
cpqSeEisaMemType INTEGER,
cpqSeEisaMemCache INTEGER,
cpqSeEisaMemAccess INTEGER,
cpqSeEisaMemDecode INTEGER,
cpqSeEisaMemDataSize INTEGER
}
cpqSeEisaMemSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the memory
configuration this entry describes."
::= { cpqSeEisaMemEntry 1 }
cpqSeEisaMemFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this memory configuration was registered."
::= { cpqSeEisaMemEntry 2 }
cpqSeEisaMemAllocIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for this memory allocation entry in the EISA function
block."
::= { cpqSeEisaMemEntry 3 }
cpqSeEisaMemStartAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The starting address of the memory configuration."
::= { cpqSeEisaMemEntry 4 }
cpqSeEisaMemSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size in bytes of the memory configuration."
::= { cpqSeEisaMemEntry 5 }
cpqSeEisaMemShare OBJECT-TYPE
SYNTAX INTEGER {
nonshareable(1),
shareable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the memory is shareable."
::= { cpqSeEisaMemEntry 6 }
cpqSeEisaMemType OBJECT-TYPE
SYNTAX INTEGER {
systemBaseOrExtended(1),
expanded(2),
virtual(3),
other(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of memory."
::= { cpqSeEisaMemEntry 7 }
cpqSeEisaMemCache OBJECT-TYPE
SYNTAX INTEGER {
notCached(1),
writeThroughCached(2),
writeBackCached(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the memory is cached."
::= { cpqSeEisaMemEntry 8 }
cpqSeEisaMemAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly(1),
readWrite(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of access permitted for this memory."
::= { cpqSeEisaMemEntry 9 }
cpqSeEisaMemDecode OBJECT-TYPE
SYNTAX INTEGER (0..65536)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The memory decode size (the number of address lines supported)."
::= { cpqSeEisaMemEntry 10 }
cpqSeEisaMemDataSize OBJECT-TYPE
SYNTAX INTEGER (0..65536)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The data access size for the memory in bits."
::= { cpqSeEisaMemEntry 11 }
-- ****************************************************************************
-- Standard Equipment EISA Interrupt Table
-- =======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
-- cpqSeEisaIntTable (1.3.6.1.4.1.232.1.2.5.4)
--
-- ****************************************************************************
cpqSeEisaIntTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaIntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function interrupt configuration entries."
::= { cpqSeEisaNvram 4 }
cpqSeEisaIntEntry OBJECT-TYPE
SYNTAX CpqSeEisaIntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function interrupt configuration."
INDEX { cpqSeEisaIntSlotIndex , cpqSeEisaIntFunctIndex ,
cpqSeEisaIntAllocIndex }
::= { cpqSeEisaIntTable 1 }
CpqSeEisaIntEntry ::= SEQUENCE {
cpqSeEisaIntSlotIndex INTEGER,
cpqSeEisaIntFunctIndex INTEGER,
cpqSeEisaIntAllocIndex INTEGER,
cpqSeEisaIntNum INTEGER,
cpqSeEisaIntShare INTEGER,
cpqSeEisaIntTrigger INTEGER
}
cpqSeEisaIntSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the interrupt
configuration this entry describes."
::= { cpqSeEisaIntEntry 1 }
cpqSeEisaIntFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this interrupt configuration was
registered."
::= { cpqSeEisaIntEntry 2 }
cpqSeEisaIntAllocIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for this interrupt allocation entry in the EISA
function block."
::= { cpqSeEisaIntEntry 3 }
cpqSeEisaIntNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interrupt described in this entry."
::= { cpqSeEisaIntEntry 4 }
cpqSeEisaIntShare OBJECT-TYPE
SYNTAX INTEGER {
nonshareable(1),
shareable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the interrupt is shareable."
::= { cpqSeEisaIntEntry 5 }
cpqSeEisaIntTrigger OBJECT-TYPE
SYNTAX INTEGER {
edge(1),
level(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the interrupt is edge or level
triggered."
::= { cpqSeEisaIntEntry 6 }
-- ****************************************************************************
-- Standard Equipment EISA DMA Table
-- =================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
-- cpqSeEisaIntTable (1.3.6.1.4.1.232.1.2.5.4)
-- cpqSeEisaDmaTable (1.3.6.1.4.1.232.1.2.5.5)
--
-- ****************************************************************************
cpqSeEisaDmaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaDmaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function DMA configuration entries."
::= { cpqSeEisaNvram 5 }
cpqSeEisaDmaEntry OBJECT-TYPE
SYNTAX CpqSeEisaDmaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function DMA configuration."
INDEX { cpqSeEisaDmaSlotIndex , cpqSeEisaDmaFunctIndex ,
cpqSeEisaDmaAllocIndex }
::= { cpqSeEisaDmaTable 1 }
CpqSeEisaDmaEntry ::= SEQUENCE {
cpqSeEisaDmaSlotIndex INTEGER,
cpqSeEisaDmaFunctIndex INTEGER,
cpqSeEisaDmaAllocIndex INTEGER,
cpqSeEisaDmaChannel INTEGER,
cpqSeEisaDmaShare INTEGER,
cpqSeEisaDmaTiming INTEGER,
cpqSeEisaDmaXfer INTEGER,
cpqSeEisaDmaXferCount INTEGER
}
cpqSeEisaDmaSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the DMA
configuration this entry describes."
::= { cpqSeEisaDmaEntry 1 }
cpqSeEisaDmaFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this DMA configuration was registered."
::= { cpqSeEisaDmaEntry 2 }
cpqSeEisaDmaAllocIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for this DMA channel allocation entry in the EISA
function block."
::= { cpqSeEisaDmaEntry 3 }
cpqSeEisaDmaChannel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DMA channel described in this entry."
::= { cpqSeEisaDmaEntry 4 }
cpqSeEisaDmaShare OBJECT-TYPE
SYNTAX INTEGER {
nonshareable(1),
shareable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the DMA channel is shareable."
::= { cpqSeEisaDmaEntry 5 }
cpqSeEisaDmaTiming OBJECT-TYPE
SYNTAX INTEGER {
isaTiming(1),
typeA(2),
typeB(3),
burstTypeC(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the timing (transfer rate) associated with
this configuration of the DMA channel."
::= { cpqSeEisaDmaEntry 6 }
cpqSeEisaDmaXfer OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the transfer size in bits used over this
DMA channel."
::= { cpqSeEisaDmaEntry 7 }
cpqSeEisaDmaXferCount OBJECT-TYPE
SYNTAX INTEGER {
byte(1),
word(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the addressing scheme for the DMA channel."
::= { cpqSeEisaDmaEntry 8 }
-- ****************************************************************************
-- Standard Equipment EISA Port Table
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
-- cpqSeEisaIntTable (1.3.6.1.4.1.232.1.2.5.4)
-- cpqSeEisaDmaTable (1.3.6.1.4.1.232.1.2.5.5)
-- cpqSeEisaPortTable (1.3.6.1.4.1.232.1.2.5.6)
--
-- ****************************************************************************
cpqSeEisaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function port I/O configuration entries."
::= { cpqSeEisaNvram 6 }
cpqSeEisaPortEntry OBJECT-TYPE
SYNTAX CpqSeEisaPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function port I/O configuration."
INDEX { cpqSeEisaPortSlotIndex , cpqSeEisaPortFunctIndex ,
cpqSeEisaPortAllocIndex }
::= { cpqSeEisaPortTable 1 }
CpqSeEisaPortEntry ::= SEQUENCE {
cpqSeEisaPortSlotIndex INTEGER,
cpqSeEisaPortFunctIndex INTEGER,
cpqSeEisaPortAllocIndex INTEGER,
cpqSeEisaPortAddr INTEGER,
cpqSeEisaPortShare INTEGER,
cpqSeEisaPortSize INTEGER
}
cpqSeEisaPortSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the I/O port
configuration this entry describes."
::= { cpqSeEisaPortEntry 1 }
cpqSeEisaPortFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this port I/O configuration was
registered."
::= { cpqSeEisaPortEntry 2 }
cpqSeEisaPortAllocIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for this I/O port range allocation entry in the EISA
function block."
::= { cpqSeEisaPortEntry 3 }
cpqSeEisaPortAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The I/O port address being described in this entry."
::= { cpqSeEisaPortEntry 4 }
cpqSeEisaPortShare OBJECT-TYPE
SYNTAX INTEGER {
nonshareable(1),
shareable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates if the port is shareable."
::= { cpqSeEisaPortEntry 5 }
cpqSeEisaPortSize OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of sequential ports starting at the
eisaPortAddrIndex that are be configured."
::= { cpqSeEisaPortEntry 6 }
-- ****************************************************************************
-- Standard Equipment EISA Free Form Table
-- =======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
-- cpqSeEisaIntTable (1.3.6.1.4.1.232.1.2.5.4)
-- cpqSeEisaDmaTable (1.3.6.1.4.1.232.1.2.5.5)
-- cpqSeEisaPortTable (1.3.6.1.4.1.232.1.2.5.6)
-- cpqSeEisaFreeFormTable (1.3.6.1.4.1.232.1.2.5.7)
--
-- ****************************************************************************
cpqSeEisaFreeFormTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaFreeFormEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function free form entries."
::= { cpqSeEisaNvram 7 }
cpqSeEisaFreeFormEntry OBJECT-TYPE
SYNTAX CpqSeEisaFreeFormEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function free form."
INDEX { cpqSeEisaFreeFormSlotIndex ,
cpqSeEisaFreeFormFunctIndex }
::= { cpqSeEisaFreeFormTable 1 }
CpqSeEisaFreeFormEntry ::= SEQUENCE {
cpqSeEisaFreeFormSlotIndex INTEGER,
cpqSeEisaFreeFormFunctIndex INTEGER,
cpqSeEisaFreeFormValue OCTET STRING
}
cpqSeEisaFreeFormSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the free form
information this entry describes."
::= { cpqSeEisaFreeFormEntry 1 }
cpqSeEisaFreeFormFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this free form was registered."
::= { cpqSeEisaFreeFormEntry 2 }
cpqSeEisaFreeFormValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..205))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The free form value."
::= { cpqSeEisaFreeFormEntry 3 }
-- ****************************************************************************
-- Standard Equipment EISA Function Port Initialization Table
-- ==========================================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeEisaNvram Group (1.3.6.1.4.1.232.1.2.5)
-- cpqSeEisaSlotTable (1.3.6.1.4.1.232.1.2.5.1)
-- cpqSeEisaFunctTable (1.3.6.1.4.1.232.1.2.5.2)
-- cpqSeEisaMemTable (1.3.6.1.4.1.232.1.2.5.3)
-- cpqSeEisaIntTable (1.3.6.1.4.1.232.1.2.5.4)
-- cpqSeEisaDmaTable (1.3.6.1.4.1.232.1.2.5.5)
-- cpqSeEisaPortTable (1.3.6.1.4.1.232.1.2.5.6)
-- cpqSeEisaFreeFormTable (1.3.6.1.4.1.232.1.2.5.7)
-- cpqSeEisaInitTable (1.3.6.1.4.1.232.1.2.5.8)
--
-- ****************************************************************************
cpqSeEisaInitTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeEisaInitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of EISA function port initialization entries."
::= { cpqSeEisaNvram 8 }
cpqSeEisaInitEntry OBJECT-TYPE
SYNTAX CpqSeEisaInitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of an EISA function port initialization."
INDEX { cpqSeEisaInitSlotIndex , cpqSeEisaInitFunctIndex ,
cpqSeEisaInitAllocIndex }
::= { cpqSeEisaInitTable 1 }
CpqSeEisaInitEntry ::= SEQUENCE {
cpqSeEisaInitSlotIndex INTEGER,
cpqSeEisaInitFunctIndex INTEGER,
cpqSeEisaInitAllocIndex INTEGER,
cpqSeEisaInitUseMask INTEGER,
cpqSeEisaInitAccess INTEGER,
cpqSeEisaInitAddr INTEGER,
cpqSeEisaInitValue INTEGER,
cpqSeEisaInitMask INTEGER
}
cpqSeEisaInitSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The EISA slot number of the board that registered the port
initialization this entry describes."
::= { cpqSeEisaInitEntry 1 }
cpqSeEisaInitFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function in which this port initialization was registered."
::= { cpqSeEisaInitEntry 2 }
cpqSeEisaInitAllocIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for this port initialization entry in the EISA
function block."
::= { cpqSeEisaInitEntry 3 }
cpqSeEisaInitUseMask OBJECT-TYPE
SYNTAX INTEGER {
useValueOnly(1),
useValueAndMask(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates if a mask will be used when performing
initialization."
::= { cpqSeEisaInitEntry 4 }
cpqSeEisaInitAccess OBJECT-TYPE
SYNTAX INTEGER {
other(1),
eightBitAddress(2),
sixteenBitAddress(3),
thirtyTwoBitAddress(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the number of bits this entry initializes."
::= { cpqSeEisaInitEntry 5 }
cpqSeEisaInitAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the port address this entry initializes."
::= { cpqSeEisaInitEntry 6 }
cpqSeEisaInitValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates the value to which this port is initialized."
::= { cpqSeEisaInitEntry 7 }
cpqSeEisaInitMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the mask to use when performing
initialization."
::= { cpqSeEisaInitEntry 8 }
-- ****************************************************************************
-- Standard Equipment ROM Description Table
-- ========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeRom Group (1.3.6.1.4.1.232.1.2.6)
-- cpqSeSysRomVer (1.3.6.1.4.1.232.1.2.6.1)
-- cpqSeOptRomTable (1.3.6.1.4.1.232.1.2.6.2)
--
-- The ROM group contains a description of the system ROM and a table
-- providing option ROM information. The option ROM table contains
-- entries specifying the starting address and size of the each option
-- ROM in the system.
--
-- Implementation of the ROM group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeSysRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System ROM version information."
::= { cpqSeRom 1 }
cpqSeOptRomTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeOptRomEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of option ROM descriptions."
::= { cpqSeRom 2 }
cpqSeOptRomEntry OBJECT-TYPE
SYNTAX CpqSeOptRomEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An option ROM description."
INDEX { cpqSeOptRomAddrIndex }
::= { cpqSeOptRomTable 1 }
CpqSeOptRomEntry ::= SEQUENCE {
cpqSeOptRomAddrIndex INTEGER,
cpqSeOptRomSize INTEGER
}
cpqSeOptRomAddrIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The starting address of the option ROM.
This value indicates the number of bytes from the start of
physical memory to the beginning of this option ROM."
::= { cpqSeOptRomEntry 1 }
cpqSeOptRomSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size in bytes of the option ROM."
::= { cpqSeOptRomEntry 2 }
cpqSeBiosRomDataRaw OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The BIOS ROM data area. This may be the current contents or
a copy of the BIOS ROM data area from when the Insight Agent was
initialized."
::= { cpqSeRom 3 }
cpqSeRedundantSysRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System ROM version information for the redundant ROM
image. This will be left blank if the system does not
support a redundant ROM."
::= { cpqSeRom 4 }
cpqSeSmbiosVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SMBIOS version information."
::= { cpqSeRom 5 }
cpqSeMPFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The version of Management Processor Firmware."
::= { cpqSeRom 6 }
cpqSeBMCFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The version of the manageability firmware."
::= { cpqSeRom 7 }
cpqSeHPVMFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The version of the virtual machine firmware."
::= { cpqSeRom 8 }
-- ****************************************************************************
-- Standard Equipment Keyboard Group
-- =================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeKeyboard Group (1.3.6.1.4.1.232.1.2.7)
--
-- The keyboard group describes the keyboard attached to the system.
--
-- Implementation of the Keyboard group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeKeyboardDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of the keyboard."
::= { cpqSeKeyboard 1 }
-- ****************************************************************************
-- Standard Equipment Video Group
-- ==============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeVideo Group (1.3.6.1.4.1.232.1.2.8)
--
-- The video group describes the video adapter and display.
--
-- Implementation of the video group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeVideoDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of the video system in the computer. This may
include the manufacturer, board name, modes supported, etc.."
::= { cpqSeVideo 1 }
-- ****************************************************************************
-- Standard Equipment Serial Port Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeSerialPort Group (1.3.6.1.4.1.232.1.2.9)
-- cpqSeSerialPortTable (1.3.6.1.4.1.232.1.2.9.1)
--
-- The serial port group describes the serial ports in the system.
--
-- Implementation of the Serial Port group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
--
-- ****************************************************************************
cpqSeSerialPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of serial port descriptions."
::= { cpqSeSerialPort 1 }
cpqSeSerialPortEntry OBJECT-TYPE
SYNTAX CpqSeSerialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a serial port."
INDEX { cpqSeSerialPortIndex }
::= { cpqSeSerialPortTable 1 }
CpqSeSerialPortEntry ::= SEQUENCE {
cpqSeSerialPortIndex INTEGER,
cpqSeSerialPortAddr INTEGER,
cpqSeSerialPortDesc DisplayString,
cpqSeSerialPortHwLocation DisplayString
}
cpqSeSerialPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely specifies this entry."
::= { cpqSeSerialPortEntry 1 }
cpqSeSerialPortAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The I/O port address used by this serial port."
::= { cpqSeSerialPortEntry 2 }
cpqSeSerialPortDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of further information known about the serial
port. This may be an empty string if no further information is
known."
::= { cpqSeSerialPortEntry 3 }
cpqSeSerialPortHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the serial port.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeSerialPortEntry 4 }
-- ****************************************************************************
-- Standard Equipment Parallel Port Table
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeParallel Group (1.3.6.1.4.1.232.1.2.10)
-- cpqSeParallelPortTable (1.3.6.1.4.1.232.1.2.10.1)
--
--
-- The parallel port group describes the parallel ports in the system.
--
-- Implementation of the Parallel Port group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
--
-- ****************************************************************************
cpqSeParallelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeParallelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of parallel port descriptions."
::= { cpqSeParallelPort 1 }
cpqSeParallelPortEntry OBJECT-TYPE
SYNTAX CpqSeParallelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a parallel port."
INDEX { cpqSeParallelPortIndex }
::= { cpqSeParallelPortTable 1 }
CpqSeParallelPortEntry ::= SEQUENCE {
cpqSeParallelPortIndex INTEGER,
cpqSeParallelPortAddr INTEGER,
cpqSeParallelPortDesc DisplayString,
cpqSeParrallelPortHwLocation DisplayString
}
cpqSeParallelPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely specifies this entry."
::= { cpqSeParallelPortEntry 1 }
cpqSeParallelPortAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The I/O port address used by this parallel port."
::= { cpqSeParallelPortEntry 2 }
cpqSeParallelPortDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of further information known about the
parallel port. This may be an empty string if no further
information is known."
::= { cpqSeParallelPortEntry 3 }
cpqSeParrallelPortHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the parallel port.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeParallelPortEntry 4 }
-- ****************************************************************************
-- Standard Equipment Floppy Disk Table
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeFloppyDisk Group (1.3.6.1.4.1.232.1.2.11)
-- cpqSeFloppyDiskTable (1.3.6.1.4.1.232.1.2.11.1)
--
-- The floppy disk group describes the floppy disk drives in the system.
--
-- Implementation of the Floppy Disk group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeFloppyDiskTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeFloppyDiskEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of floppy drive descriptions."
::= { cpqSeFloppyDisk 1 }
cpqSeFloppyDiskEntry OBJECT-TYPE
SYNTAX CpqSeFloppyDiskEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A floppy drive description."
INDEX { cpqSeFloppyDiskIndex }
::= { cpqSeFloppyDiskTable 1 }
CpqSeFloppyDiskEntry ::= SEQUENCE {
cpqSeFloppyDiskIndex INTEGER,
cpqSeFloppyDiskType INTEGER,
cpqSeFloppyDiskHwLocation DisplayString
}
cpqSeFloppyDiskIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely specifies this entry. If possible, this
field will map directly to the drive letter (0 for A:, 1 for B:)."
::= { cpqSeFloppyDiskEntry 1 }
cpqSeFloppyDiskType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
drive360k(2),
drive1200k(3),
drive720k(4),
drive1440k(5),
drive120mb(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type (capacity) of the floppy drive. The following values
are valid:
other (1) This floppy drive could not be identified.
drive360k (2) This is a 360 kilobyte, 5.25 inch floppy drive.
drive1200k (3) This is a 1.2 megabyte, 5.25 inch floppy drive.
drive720k (4) This is a 720 kilobyte, 3.5 inch floppy drive.
drive1440k (5) This is a 1.44 megabyte, 3.5 inch floppy drive.
drive120mb(6) This is a 120 megabyte, 3.5 inch floptical
drive."
::= { cpqSeFloppyDiskEntry 2 }
cpqSeFloppyDiskHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the floppy disk.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeFloppyDiskEntry 3 }
-- ****************************************************************************
-- Standard Equipment Fixed Disk Table
-- ===================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeFixedDisk Group (1.3.6.1.4.1.232.1.2.12)
-- cpqSeFixedDiskTable (1.3.6.1.4.1.232.1.2.12.1)
--
-- The fixed disk group describes the fixed disk drives in the system
-- that are accessible through a ST506 compatible interface.
--
-- Implementation of the Fixed Disk group is mandatory for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSeFixedDiskTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeFixedDiskEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ST-506 interface accessible fixed disk descriptions."
::= { cpqSeFixedDisk 1 }
cpqSeFixedDiskEntry OBJECT-TYPE
SYNTAX CpqSeFixedDiskEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A fixed disk description."
INDEX { cpqSeFixedDiskIndex }
::= { cpqSeFixedDiskTable 1 }
CpqSeFixedDiskEntry ::= SEQUENCE {
cpqSeFixedDiskIndex INTEGER,
cpqSeFixedDiskType INTEGER,
cpqSeFixedDiskCyls INTEGER,
cpqSeFixedDiskHeads INTEGER,
cpqSeFixedDiskSectors INTEGER,
cpqSeFixedDiskCapacity INTEGER,
cpqSeFixedDiskHwLocation DisplayString
}
cpqSeFixedDiskIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely specifies this entry. Each possible
index value indicates a specific drive as shown in the table
below:
fixedDiskIndex IDE/ESDI Controller Drive Unit
============= =================== ==========
0 Primary 1
1 Primary 2
2 Secondary 1
3 Secondary 2
Any other index value would be implementation specific."
::= { cpqSeFixedDiskEntry 1 }
cpqSeFixedDiskType OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The drive type."
::= { cpqSeFixedDiskEntry 2 }
cpqSeFixedDiskCyls OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of cylinders on the drive."
::= { cpqSeFixedDiskEntry 3 }
cpqSeFixedDiskHeads OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of heads on the drive."
::= { cpqSeFixedDiskEntry 4 }
cpqSeFixedDiskSectors OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of sectors per track on the drive."
::= { cpqSeFixedDiskEntry 5 }
cpqSeFixedDiskCapacity OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The capacity of the drive in megabytes."
::= { cpqSeFixedDiskEntry 6 }
cpqSeFixedDiskHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the fixed disk.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeFixedDiskEntry 7 }
-- ****************************************************************************
-- Standard Equipment PCI Group
-- ============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePci Group (1.3.6.1.4.1.232.1.2.13)
--
--
-- The PCI group provides a set of tables and variables that detail the
-- configuration information about the PCI bus architecture. The
-- Peripheral Component Interconnect (PCI) local bus is a 32 or 64-bit
-- high performance bus intended to be used to interconnect highly
-- integrated peripheral controller components, peripheral add-in boards,
-- and processor/memory sub-systems.
--
-- Implementation of the cpqSePci group is optional.
-- Support for the cpqSePci group is MANDATORY for all systems that
-- contain a PCI bus.
-- ****************************************************************************
-- ****************************************************************************
-- Standard Equipment PCI Slot Table
-- =================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePci Group (1.3.6.1.4.1.232.1.2.13)
-- cpqSePciSlotTable (1.3.6.1.4.1.232.1.2.13.1)
--
-- ****************************************************************************
cpqSePciSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSePciSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PCI slot information entries."
::= { cpqSePci 1}
cpqSePciSlotEntry OBJECT-TYPE
SYNTAX CpqSePciSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a PCI slot."
INDEX { cpqSePciSlotBusNumberIndex , cpqSePciSlotDeviceNumberIndex}
::= { cpqSePciSlotTable 1 }
CpqSePciSlotEntry ::= SEQUENCE {
cpqSePciSlotBusNumberIndex INTEGER,
cpqSePciSlotDeviceNumberIndex INTEGER,
cpqSePciPhysSlot INTEGER,
cpqSePciSlotSubSystemID OCTET STRING,
cpqSePciSlotBoardName DisplayString,
cpqSePciSlotWidth INTEGER,
cpqSePciSlotSpeed INTEGER,
cpqSePciSlotExtendedInfo INTEGER,
cpqSePciSlotType INTEGER,
cpqSePciSlotCurrentMode INTEGER,
cpqSePciMaxSlotSpeed INTEGER,
cpqSePciXMaxSlotSpeed INTEGER,
cpqSePciCurrentSlotSpeed INTEGER,
cpqSePciHwLocation DisplayString,
cpqSePciSlotIOCTablePtr INTEGER,
cpqSePciSlotHeaderType INTEGER,
cpqSePciIsSlot0Embedded INTEGER,
cpqSePcieSlotMaxLinkSpeed INTEGER,
cpqSePcieSlotMaxLinkWidth INTEGER
}
cpqSePciSlotBusNumberIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A number that uniquely identifies this device on its PCI bus.
Values greater than 255 are considered dummy bus numbers for empty PCI slots.
For systems supporting multiple PCI segments, the segment will be encoded into the high order
word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0."
::= { cpqSePciSlotEntry 1 }
cpqSePciSlotDeviceNumberIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A number that uniquely identifies this device on its PCI bus."
::= { cpqSePciSlotEntry 2 }
cpqSePciPhysSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical PCI slot number of this device. Embedded devices
will return 0 for this variable."
::= { cpqSePciSlotEntry 3 }
cpqSePciSlotSubSystemID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Uniquely identifies the board configured in this slot. A zero
length ID indicates the Subsystem ID is not supported and the
(Device ID/Vendor ID) should be used for identification purposes.
An ID of all 0xFFh indicates an empty slot."
::= { cpqSePciSlotEntry 4 }
cpqSePciSlotBoardName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product name (or other suitable description) of this PCI
board. This field may be empty if no descriptive information
is known about the board."
::= { cpqSePciSlotEntry 5 }
cpqSePciSlotWidth OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
thirtyTwoBit(3),
sixtyFourBit(4),
oneTwentyEightBit(5),
x1(6),
x2(7),
x4(8),
x8(9),
x12(10),
x16(11),
x32(12)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum data width supported by this PCI slot."
::= { cpqSePciSlotEntry 6 }
cpqSePciSlotSpeed OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
thirtyThreeMHz(3),
sixtySixMHz(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum speed supported by this PCI slot."
::= { cpqSePciSlotEntry 7 }
cpqSePciSlotExtendedInfo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The PCI Extended Slot Information.
This is a set of flags indicating extended features for the
PCI slot. Each bit has the following meaning when it is
set (1):
Bit 0: Extended SCSI PCI Slot
Bit 1: PCI-X capable
Bits 2-31: reserved (set to 0)
NOTE: bit 31 is the most significant bit, bit 0 is the least
significant."
::= { cpqSePciSlotEntry 8 }
cpqSePciSlotType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
pci(3),
pci66(4),
pcix(5),
pciexpress(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of PCI the slot.
This indicates the capability of the slot, not the currently
operating mode."
::= { cpqSePciSlotEntry 9 }
cpqSePciSlotCurrentMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
pci(3),
pci66(4),
pcix(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operating mode of PCI/PCI-X slot.
This indicates the current operating mode of the device in the
slot. If the slot is empty, this value would be unknown."
::= { cpqSePciSlotEntry 10 }
cpqSePciMaxSlotSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum speed in megahertz supported by this PCI slot. If
the slot also supports PCI-X, this value indicates the maximum
speed of the slot when a non-PCI-X adapter is used.
An entry of 0 indicates the speed is unknown."
::= { cpqSePciSlotEntry 11 }
cpqSePciXMaxSlotSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum speed in megahertz supported by this PCI-X slot.
An entry of 0 indicates the speed is unknown. An entry
of -1 indicates the slot does not support PCI-X."
::= { cpqSePciSlotEntry 12 }
cpqSePciCurrentSlotSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current speed in megahertz of the adapter in this PCI
or PCI-X slot.
An entry of 0 indicates the speed is could not be determined or
the slot is empty."
::= { cpqSePciSlotEntry 13 }
cpqSePciHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the Peripheral Component
Interconnect (PCI) bus.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSePciSlotEntry 14 }
cpqSePciSlotIOCTablePtr OBJECT-TYPE
SYNTAX INTEGER(0..19)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for the I/O Chassis in cpqSePCISlotIOCTablePtr where this PCI slot is physically located."
::= { cpqSePciSlotEntry 15 }
cpqSePciSlotHeaderType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This represents header type byte of a PCI device"
::= { cpqSePciSlotEntry 16 }
cpqSePciIsSlot0Embedded OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This OID indicates whether PCI slot 0 is embedded in the machine or not."
::= { cpqSePciSlotEntry 17 }
cpqSePcieSlotMaxLinkSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the maximum link speed for the PCIe slot. An entry of 0 indicates
the maximum link speed could not be determined or the slot is not PCIe.
The unit is Mb/s."
::= { cpqSePciSlotEntry 18 }
cpqSePcieSlotMaxLinkWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the maximum link for the PCIe slot. Value N means N lanes.
An entry of 0 indicates the maximum link width could not be determined
or the slot is not PCIe."
::= { cpqSePciSlotEntry 19 }
-- ****************************************************************************
-- Standard Equipment PCI Function Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePci Group (1.3.6.1.4.1.232.1.2.13)
-- cpqSePciFunctTable (1.3.6.1.4.1.232.1.2.13.2)
--
-- ****************************************************************************
cpqSePciFunctTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSePciFunctEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PCI function information entries."
::= { cpqSePci 2}
cpqSePciFunctEntry OBJECT-TYPE
SYNTAX CpqSePciFunctEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of the functions in each PCI slot."
INDEX { cpqSePciFunctBusNumberIndex, cpqSePciFunctDeviceNumberIndex,
cpqSePciFunctIndex }
::= { cpqSePciFunctTable 1 }
CpqSePciFunctEntry ::= SEQUENCE {
cpqSePciFunctBusNumberIndex INTEGER,
cpqSePciFunctDeviceNumberIndex INTEGER,
cpqSePciFunctIndex INTEGER,
cpqSePciFunctClassCode OCTET STRING,
cpqSePciFunctClassDescription DisplayString,
cpqSePciFunctDeviceID INTEGER,
cpqSePciFunctVendorID INTEGER,
cpqSePciFunctRevID INTEGER,
cpqSePciFunctIntLine INTEGER,
cpqSePciFunctDevStatus INTEGER,
cpqSePciFunctHwLocation DisplayString,
cpqSePcieFunctNegotiatedLinkSpeed INTEGER,
cpqSePcieFunctNegotiatedLinkWidth INTEGER,
cpqSePcieFunctMaxLinkSpeed INTEGER,
cpqSePcieFunctMaxLinkWidth INTEGER
}
cpqSePciFunctBusNumberIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The PCI bus number for this device function.
For systems supporting multiple PCI segments, the segment will be encoded into the high order
word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0."
::= { cpqSePciFunctEntry 1 }
cpqSePciFunctDeviceNumberIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device index for this function."
::= { cpqSePciFunctEntry 2 }
cpqSePciFunctIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The unique index that specifies this function."
::= { cpqSePciFunctEntry 3 }
cpqSePciFunctClassCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The class code register as defined in the PCI Local
Bus Specification in the following format:
Octet Register
----- --------
1 Programming Interface
2 Sub-class code
3 Base class code"
::= { cpqSePciFunctEntry 4 }
cpqSePciFunctClassDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text string which describes the PCI Base Class and
Sub Class to which this device belongs. This field
may empty if no descriptive information is known about
this function's class."
::= { cpqSePciFunctEntry 5 }
cpqSePciFunctDeviceID OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable identifies this particular device. This
identifier is allocated by the component manufacturer."
::= { cpqSePciFunctEntry 6 }
cpqSePciFunctVendorID OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable identifies the component manufacturer. Valid
identifiers are assigned by the PCI SIG."
::= { cpqSePciFunctEntry 7 }
cpqSePciFunctRevID OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is a vendor defined extension to the device ID and
specifies a device specific revision identifier."
::= { cpqSePciFunctEntry 8}
cpqSePciFunctIntLine OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable specifies which input of the system interrupt
controller(s) the device's interrupt pin is connected to.
A value of 0ffh means unknown or no connection."
::= { cpqSePciFunctEntry 9}
cpqSePciFunctDevStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
enabled(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the device described by this function.
Some PCI devices, such as embedded devices, have the
potential of being present but disabled. "
::= { cpqSePciFunctEntry 10 }
cpqSePciFunctHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the Peripheral Component
Interconnect (PCI) bus.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSePciFunctEntry 11 }
cpqSePcieFunctNegotiatedLinkSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the negotiated link speed for the PCIe link of the PCI device.
An entry of 0 indicates the negotiated link speed could not be determined
or the device is not PCIe. The unit is Mb/s."
::= { cpqSePciFunctEntry 12 }
cpqSePcieFunctNegotiatedLinkWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the negotiated link width for the PCIe link of the device.
Value N means N lanes. An entry of 0 indicates the negotiated link width
could not be determined or the device is not PCIe."
::= { cpqSePciFunctEntry 13 }
cpqSePcieFunctMaxLinkSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the maximum link speed for the PCIe device. An entry of 0 indicates
the maximum link speed could not be determined or the device is not PCIe.
The unit is Mb/s."
::= { cpqSePciFunctEntry 14 }
cpqSePcieFunctMaxLinkWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the maximum link width for the PCIe device. Value N means N lanes.
An entry of 0 indicates the maximum link width could not be determined
or the device is not PCIe."
::= { cpqSePciFunctEntry 15 }
-- ****************************************************************************
-- Standard Equipment PCI Base Memory Table
-- ============================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePci Group (1.3.6.1.4.1.232.1.2.13)
-- cpqSePciMemoryTable (1.3.6.1.4.1.232.1.2.13.3)
--
-- ****************************************************************************
cpqSePciMemoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSePciMemoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PCI base memory entries"
::= { cpqSePci 3}
cpqSePciMemoryEntry OBJECT-TYPE
SYNTAX CpqSePciMemoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of the base memory usage in each function"
INDEX { cpqSePciMemoryBusNumberIndex, cpqSePciMemoryDeviceNumberIndex,
cpqSePciMemoryFunctionIndex, cpqSePciMemoryIndex }
::= { cpqSePciMemoryTable 1 }
CpqSePciMemoryEntry ::= SEQUENCE {
cpqSePciMemoryBusNumberIndex INTEGER,
cpqSePciMemoryDeviceNumberIndex INTEGER,
cpqSePciMemoryFunctionIndex INTEGER,
cpqSePciMemoryIndex INTEGER,
cpqSePciMemoryBaseAddr INTEGER,
cpqSePciMemoryType INTEGER,
cpqSePciMemorySize INTEGER,
cpqSePciMemoryHwLocation DisplayString
}
cpqSePciMemoryBusNumberIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The PCI bus number for this memory entry.
For systems supporting multiple PCI segments, the segment will be encoded into the high order
word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0."
::= { cpqSePciMemoryEntry 1 }
cpqSePciMemoryDeviceNumberIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device index for this memory entry"
::= { cpqSePciMemoryEntry 2 }
cpqSePciMemoryFunctionIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The unique index that specifies the function associated
with this memory entry."
::= { cpqSePciMemoryEntry 3 }
cpqSePciMemoryIndex OBJECT-TYPE
SYNTAX INTEGER (0..6)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The unique index that specifies this memory entry. "
::= { cpqSePciMemoryEntry 4 }
cpqSePciMemoryBaseAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Base address of this memory usage entry."
::= { cpqSePciMemoryEntry 5 }
cpqSePciMemoryType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
io(2),
memory-mapped(3),
exp-rom(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of memory this entry describes. This variable
is used to determine if this memory entry maps into
memory, expansion rom or I/O space."
::= { cpqSePciMemoryEntry 6 }
cpqSePciMemorySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable specifies how much address space this function
requires. A value of 0 will be returned if the agent cannot
obtain this information."
::= { cpqSePciMemoryEntry 7 }
cpqSePciMemoryHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the Peripheral Component
Interconnect (PCI) bus.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSePciMemoryEntry 8 }
cpqSePciSegmentMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
single-segment(2),
multi-segment(3),
auto-segment(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The PCI segment mode of the system, if supported."
::= { cpqSePci 4 }
-- ****************************************************************************
-- Standard Equipment PC Card Group
-- ========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePCCard Group (1.3.6.1.4.1.232.1.2.14)
-- cpqSePCCardSlotTable (1.3.6.1.4.1.232.1.2.14.1)
--
-- The PC Card Group provides a set of tables and variables that detail the
-- configuration information about the PC Card slot architecture. The PC
-- Card Slots are connected via a dedicated bridge off the PCI local bus
-- which allows 16-bit and/or 32-bit expansion slots.
--
-- Implementation of the cpqSePCCard group is optional for desktop and
-- server platforms but mandatory for portables.
-- ****************************************************************************
cpqSePCCardSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSePCCardSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PC Card slot information entries."
::= { cpqSePCCard 1}
cpqSePCCardSlotEntry OBJECT-TYPE
SYNTAX CpqSePCCardSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A PC Card slot description table entry.
A table entry is defined for each PC Card Slot in the
current system configuration."
INDEX { cpqSePCCardSlotIndex}
::= { cpqSePCCardSlotTable 1 }
CpqSePCCardSlotEntry ::= SEQUENCE {
cpqSePCCardSlotIndex INTEGER,
cpqSePCCardCondition INTEGER,
cpqSePCCardPhysLocation DisplayString,
cpqSePCCardSlotType INTEGER,
cpqSePCCardSlotWidth INTEGER,
cpqSePCCardSlotThermalCapacity INTEGER,
cpqSePCCardSlotThermalSensor INTEGER,
cpqSePCCardSlotPowerState INTEGER,
cpqSePCCardStatus INTEGER,
cpqSePCCardDeviceInfo DisplayString,
cpqSePCCardProductInfo DisplayString,
cpqSePCCardSerialNumber DisplayString,
cpqSePCCardAssetTag DisplayString
}
cpqSePCCardSlotIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the logical PC Card slot number for this PC Card Slot.
In addition, the slot number serves as the index into the
PC Card data table. Typical index ranges will be either 1 to
4 (for 4 slots) or 1 to 2 (for 2 slots). (Un)Docking may
cause the supported index range to change dynamically."
::= { cpqSePCCardSlotEntry 1 }
cpqSePCCardCondition OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the overall condition of the PC Card.
The supported values are defined as follows:
unknown(1)
The current condition is unknown for the PC Card or PC Card Slot.
ok(2)
PC Card operations are normal.
No user action required.
degraded (3)
PC Card operations have degraded.
Consult the cpqSePCCardStatus field for recommended actions.
failed (4)
PC Card operations have failed.
Consult the cpqSePCCardStatus field for recommended actions."
::= { cpqSePCCardSlotEntry 2 }
cpqSePCCardPhysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the user level PC Card Slot location description.
Text strings supported are:
- System Unit Top Slot,
- System Unit Bottom Slot,
- Docking Station Top Slot,
- Docking Station Bottom Slot."
::= { cpqSePCCardSlotEntry 3 }
cpqSePCCardSlotType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the PC Card Slot capabilities.
This is a bit mapped value defined by DMI Mobile Supplement for the System Slots Group,
Slot Type. Bits of interest for PC Card support are:
Bit 6 - PCMCIA slot (if set),
Bit 13 - 16 bit PC Card capable (if set),
Bit 14 - CardBus PC Card capable (if set),
Bit 15 - ZV Port capable (if set),
Bit 16 - Modem Ring Resume capable (if set),
All other bits should be zero (reset) for PC Card slots."
::= { cpqSePCCardSlotEntry 4 }
cpqSePCCardSlotWidth OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
width8bit(3),
width16bit(4),
width32bit(5),
width64bit(6),
width128bit(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the maximum bus width for this PC Card Slot.
The supported values are defined as follows:
Other (1)
Value is not in defined list.
Unknown (2)
Actual value is not known.
width 8 bit (3)
Bus is 8 bits wide.
width 16 bit (4)
Bus is 16 bits wide.
width 32 bit (5)
Bus is 32 bits wide.
width 64 bit (6)
Bus is 64 bits wide.
width 128 bit (7)
Bus is 128 bits wide."
::= { cpqSePCCardSlotEntry 5 }
cpqSePCCardSlotThermalCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the maximum thermal dissipation capacity (milliwatts)
for this PC Card Slot. A value of zero indicates the thermal
capacity is unknown. A non-zero value indicates the thermal
capacity in milliwatts."
::= { cpqSePCCardSlotEntry 6 }
cpqSePCCardSlotThermalSensor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the Thermal Sensor ID that monitors this PC Card Slot.
A value of zero indicates that a sensor is not present or
unknown for this slot. A non-zero value indicates the sensor
ID as defined by the platform firmware."
::= { cpqSePCCardSlotEntry 7 }
cpqSePCCardSlotPowerState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
on(2),
off(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the current power state (On/Off) for this PC Card Slot.
The supported values are defined as follows:
unknown (1)
Current power state is unknown.
on (2)
Power is currently on.
off (3)
Power is currently off."
::= { cpqSePCCardSlotEntry 8 }
cpqSePCCardStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
thermalDegraded(3),
thermalFailure(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the operating status for the card in this PC Card Slot.
The supported values are defined as follows:
unknown (1)
The current status is not known for the PC Card or
PC Card Slot.
ok (2)
PC Card operations are normal.
No user action required.
thermalDegraded (3)
PC Card operations have degraded due to unsafe thermal
conditions.
Recommended Actions include:
Discontinue the use of the PC Card as soon as
possible. If a Modem or LAN card then close
all communication applications/links. If a
Memory, ATA, or SCSI device then close all
open/related files. Remove PC Card from slot
after use is discontinued, if possible.
thermalFailure (4)
PC Card operations have failed due to unsafe thermal
conditions. The PC Card will automatically be powered
off to protect itself and the system.
Recommended Actions include:
Discontinue the use of the PC Card immediately.
If a Modem or LAN card then close all communication applications/links.
If a Memory, ATA, or SCSI device then close all open/related files.
Remove PC Card from slot after use is discontinued, if possible."
::= { cpqSePCCardSlotEntry 9 }
cpqSePCCardDeviceInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the PC Card Manufacturer / Device information for
the card in this PC Card Slot. The returned string data is
read from the PC Card's onboard Card Information Structure
(CIS)."
::= { cpqSePCCardSlotEntry 10 }
cpqSePCCardProductInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the PC Card Model / Part Number information for
the card in this PC Card Slot. The returned string data
is read from the PC Card's onboard Card Information
Structure (CIS)."
::= { cpqSePCCardSlotEntry 11 }
cpqSePCCardSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the PC Card Serial Number information for the
card in this PC Card Slot. The returned string data is
read from the PC Card's onboard Card Information Structure
(CIS)."
::= { cpqSePCCardSlotEntry 12 }
cpqSePCCardAssetTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the PC Card Asset Tag information for the card in
this PC Card Slot. The returned string data is read from
the PC Card's onboard Card Information Structure (CIS)."
::= { cpqSePCCardSlotEntry 13 }
-- ****************************************************************************
-- Standard Equipment USB Port Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeUSBPort Group (1.3.6.1.4.1.232.1.2.15)
-- cpqSeUSBPortTable (1.3.6.1.4.1.232.1.2.15.1)
--
-- The cpqSeUSBPort group lists the physical USB ports in the system.
--
-- Implementation of the cpqSeUSBPort group is optional.
-- Support for the cpqSeUSBPort group is MANDATORY for all systems that
-- contain a USB bus.
--
-- ****************************************************************************
cpqSeUSBPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeUSBPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of USB built-in port descriptions containing one entry
for each physical USB connector shipped on the system.
Add-in USB ports are not reflected in this table."
::= { cpqSeUSBPort 1 }
cpqSeUSBPortEntry OBJECT-TYPE
SYNTAX CpqSeUSBPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a USB port."
INDEX { cpqSeUSBPortIndex }
::= { cpqSeUSBPortTable 1 }
CpqSeUSBPortEntry ::= SEQUENCE {
cpqSeUSBPortIndex INTEGER,
cpqSeUSBPortType INTEGER,
cpqSeUSBPortHwLocation DisplayString,
cpqSeUSBPortStatus INTEGER,
cpqSeUSBPortDeviceName DisplayString,
cpqSeUSBPortDeviceCapacity INTEGER,
cpqSeUSBPortDeviceManufacturer DisplayString,
cpqSeUSBPortDeviceModel DisplayString,
cpqSeUSBPortDeviceFWVersion DisplayString,
cpqSeUSBPortDeviceSerialNumber DisplayString,
cpqSeUSBPortDevicePartNumber DisplayString,
cpqSeUSBPortDeviceCount INTEGER,
cpqSeUSBPortDeviceReadErrorCount OCTET STRING,
cpqSeUSBPortDeviceWriteErrorCount OCTET STRING,
cpqSeUSBPortDeviceReadThreshold OCTET STRING,
cpqSeUSBPortDeviceWriteThreshold OCTET STRING,
cpqSeUSBPortDeviceStatus INTEGER,
cpqSeUSBPortDeviceFeature INTEGER,
cpqSeUSBPortDeviceFailedSlot INTEGER,
cpqSeUSBPortDeviceLastSlotWithError INTEGER,
cpqSeUSBPortDeviceFaultTolerance INTEGER,
cpqSeUSBPortDevicePresent OCTET STRING
}
cpqSeUSBPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely specifies this entry."
::= { cpqSeUSBPortEntry 1 }
cpqSeUSBPortType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
usbPort(2),
sdPort(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port type.
The supported values are defined as follows:
other (1)
USB/SD port data is not available.
usbPort (2)
The port is a USB Port.
usbPort (3)
The port is a SD Port."
::= { cpqSeUSBPortEntry 2 }
cpqSeUSBPortHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the USB port.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 3 }
cpqSeUSBPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
notPopulated(2),
populated(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port status.
The supported values are defined as follows:
other (1)
USB/SD port is not available.
notPopulated (2)
The port is a USB/SD Port is not populated.
populated (3)
The port is a USB/SD Port is populated."
::= { cpqSeUSBPortEntry 4 }
cpqSeUSBPortDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the USB/SD port device name.
A NULL string indicates that the device name could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 5 }
cpqSeUSBPortDeviceCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The capacity of the USB/SD device in megabytes.
Value 0 indicates the device capacity could not
be determined."
::= { cpqSeUSBPortEntry 6 }
cpqSeUSBPortDeviceManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the USB/SD port device Manufacturer/Vendor name.
A NULL string indicates that the Manufacturer/Vendor name could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 7 }
cpqSeUSBPortDeviceModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the USB/SD port device Model name.
A NULL string indicates that the Model name could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 8 }
cpqSeUSBPortDeviceFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"USB/SD Device Firmware Version.
A NULL string indicates that the USB/SD Device Firmware Version could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 9 }
cpqSeUSBPortDeviceSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"USB/SD device Serial Number.
A NULL string indicates that the Serial Number could not
be determined or is irrelevant."
::= { cpqSeUSBPortEntry 10 }
cpqSeUSBPortDevicePartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the USB/SD device hardware part number."
::= { cpqSeUSBPortEntry 11 }
cpqSeUSBPortDeviceCount OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of flash media devices
attached to this USB port."
::= { cpqSeUSBPortEntry 12 }
cpqSeUSBPortDeviceReadErrorCount OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2))
ACCESS read-only
STATUS optional
DESCRIPTION
"An array of octets corresponding to the number of
Read Errors on each flash media device
attached to this USB Port."
::= { cpqSeUSBPortEntry 13 }
cpqSeUSBPortDeviceWriteErrorCount OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2))
ACCESS read-only
STATUS optional
DESCRIPTION
"An array of octets corresponding to the number of
Write Errors on each flash media device
attached to this USB Port."
::= { cpqSeUSBPortEntry 14 }
cpqSeUSBPortDeviceReadThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2))
ACCESS read-only
STATUS optional
DESCRIPTION
"An array of octets corresponding to the
Read Threshold on each flash media device
attached to this USB Port."
::= { cpqSeUSBPortEntry 15 }
cpqSeUSBPortDeviceWriteThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2))
ACCESS read-only
STATUS optional
DESCRIPTION
"An array of octets corresponding to the
Write Threshold on each flash media device
attached to this USB Port."
::= { cpqSeUSBPortEntry 16 }
cpqSeUSBPortDeviceStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The USB/SD Device status.
The supported values are defined as follows:
other (1)
USB/SD device status is unknown.
ok (2)
The USB/SD device status is OK. For the HP Dual MicroSD EM
USB Kit, both SD cards are OK and in redundant config.
degraded (3)
The USB/SD device status is degraded. For the HP Dual
MicroSD EM, one of the SD cards has failed and redundancy
is lost.
failed (4)
The USB/SD device status is failed. For the HP Dual
MicroSD EM, both SD cards have failed."
::= { cpqSeUSBPortEntry 17 }
cpqSeUSBPortDeviceFeature OBJECT-TYPE
SYNTAX INTEGER {
-- none(0),
redundancy-capable(1),
standard(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The USB/SD Device advanced features.
The supported values are defined as follows:
none (0) -- deprecated in 10.20
USB/SD device is a standard device with no advanced features.
redundancy-capable (1)
The USB/SD device is Redundancy-capable.
standard (2)
USB/SD device is a standard device with no advanced features."
::= { cpqSeUSBPortEntry 18 }
cpqSeUSBPortDeviceFailedSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the slot location of the flash media device attached to this port
that failed and needs to be replaced on redundancy-capable devices.
A value of -1 indicates that there is no failed flash media device
attached to this port or the location could not be determined."
::= { cpqSeUSBPortEntry 19 }
cpqSeUSBPortDeviceLastSlotWithError OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the slot location of the flash media device attached to this port
that was the last one with a read or write error detected on redundancy-capable devices.
A value of -1 indicates that none of the flash media devices attached to this port
have any read or write error or the location could not be determined."
::= { cpqSeUSBPortEntry 20 }
cpqSeUSBPortDeviceFaultTolerance OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
none(2),
mirroring(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"USB/SD Device Fault Tolerance for the HP Dual MicroSD EM USB Kit.
This shows the fault tolerance mode of the HP Dual MicroSD EM USB Kit.
The following values are valid for Fault Tolerance:
None (2)
Fault tolerance is not enabled. If read or write errors occur on the
primary SD card or if it fails, the data cannot be recovered.
Mirroring - RAID 1 (3)
Both SD cards contain identical data. If read or write errors occur
on one SD card or if it fails, the data can be retrieved from the mirror SD card."
::= { cpqSeUSBPortEntry 21 }
cpqSeUSBPortDevicePresent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2))
ACCESS read-only
STATUS optional
DESCRIPTION
"An array of octets corresponding to a value indicating the physical
presence of the flash media device.
A value of zero (0) indicates the flash media for the specified
slot is absent. A value of one (1) indicates the flash media
for the specified slot is present. "
::= { cpqSeUSBPortEntry 22 }
-- ****************************************************************************
-- Standard Equipment Cell Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeCell (1.3.6.1.4.1.232.1.2.16)
--
-- A cell is equivalent to a single board computer.
--
--
-- ****************************************************************************
cpqSeCellTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeCellEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of cells in the partition."
::= { cpqSeCell 1 }
cpqSeCellEntry OBJECT-TYPE
SYNTAX CpqSeCellEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A description of a cell in the system."
INDEX { cpqSeCellUnitIndex }
::= { cpqSeCellTable 1 }
CpqSeCellEntry ::= SEQUENCE {
cpqSeCellUnitIndex INTEGER,
cpqSeCellCabinetNumber INTEGER,
cpqSeCellCellNumber INTEGER,
cpqSeCellIOCTablePtr INTEGER,
cpqSeCellPDHCFirmwareRevision DisplayString,
cpqSeCellSysFwVersion DisplayString,
cpqSeCellBootInhibited TruthValue,
cpqSeCellToScanBusConnectionStatus INTEGER,
cpqSeCellHasCoreIO TruthValue,
cpqSeCellBoardSpeed INTEGER,
cpqSeCellPresent TruthValue,
cpqSeCellHasPower TruthValue,
cpqSeCellReadyForReconfig TruthValue,
cpqSeCellTotalMemory INTEGER,
cpqSeCellLEDState INTEGER,
cpqSeCellState INTEGER,
cpqSeCellCLMRequestPercentage INTEGER,
cpqSeCellCLMRequestSize INTEGER,
cpqSeCellCLMAllocatedSize INTEGER,
cpqSeCellInterleaveAllocatedSize INTEGER,
cpqSeCellHasInterleaveMem INTEGER,
cpqSeCellSerialNumber DisplayString,
cpqSeCellCLMCondition INTEGER
}
cpqSeCellUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a number that uniquely specifies the cell."
::= { cpqSeCellEntry 1 }
cpqSeCellCabinetNumber OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents the cabinet that the cell belongs to."
::= { cpqSeCellEntry 2 }
cpqSeCellCellNumber OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS optional
DESCRIPTION
"This value is cell/slot number that is unique across the cabinet."
::= { cpqSeCellEntry 3 }
cpqSeCellIOCTablePtr OBJECT-TYPE
SYNTAX INTEGER (0..19)
ACCESS read-only
STATUS optional
DESCRIPTION
"Table index for the I/O chassis which is connected to this cell."
::= { cpqSeCellEntry 4 }
cpqSeCellPDHCFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"HP SAL Revision"
::= { cpqSeCellEntry 5 }
cpqSeCellSysFwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the revision of system firmware on the cell board"
::= { cpqSeCellEntry 6 }
cpqSeCellBootInhibited OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value indicates whether the cell is active."
::= { cpqSeCellEntry 7 }
cpqSeCellToScanBusConnectionStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This bitmap represents the state of cell to scan
bus connection/RIO cable state.
if bit 6 is set to 1, Cable port swapped.
if bit 5 is set to 1, Cable ID mismatched.
if bit 4 is set to 1, Output Cable parity error.
if bit 3 is set to 1, Output Cable detached.
if bit 2 is set to 1, Input Cable parity error.
if bit 1 is set to 1, Input Cable detached.
if bit 0 is set to 1, Connection valid."
::= { cpqSeCellEntry 8 }
cpqSeCellHasCoreIO OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value indicates whether the cell has core I/O attached to it."
::= { cpqSeCellEntry 9 }
cpqSeCellBoardSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents the speed of the cell board/FSB ratio"
::= { cpqSeCellEntry 10 }
cpqSeCellPresent OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents whether there is a cell in the slot"
::= { cpqSeCellEntry 11 }
cpqSeCellHasPower OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents whether the cell has power"
::= { cpqSeCellEntry 12 }
cpqSeCellReadyForReconfig OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents whether the cell is ready for reconfiguration"
::= { cpqSeCellEntry 13 }
cpqSeCellTotalMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents total memory in the cell"
::= { cpqSeCellEntry 14 }
cpqSeCellLEDState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This value represents state of the cell LED.
This is a bit-mapped value defined as follows.
Bit 31..30 = 00, LED 3 is Off
= 01, LED 3 is On
= 10, LED 3 is Blinking
= 11, For LED 3 future use
Bit 29..27 = 000, LED 3 is Red
= 001, LED 3 is Yellow
= 010, LED 3 is Green
= 011, LED 3 is Blue
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 26..24 = 000, LED 3 indicates Power
= 001, LED 3 indicates Run
= 010, LED 3 indicates Attention
= 011, LED 3 indicates Fault
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 23..22 = 00, LED 2 is Off
= 01, LED 2 is On
= 10, LED 2 is Blinking
= 11, For LED 2 future use
Bit 21..19 = 000, LED 2 is Red
= 001, LED 2 is Yellow
= 010, LED 2 is Green
= 011, LED 2 is Blue
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 18..16 = 000, LED 2 indicates Power
= 001, LED 2 indicates Run
= 010, LED 2 indicates Attention
= 011, LED 2 indicates Fault
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 15..14 = 00, LED 1 is Off
= 01, LED 1 is On
= 10, LED 1 is Blinking
= 11, For LED 1 future use
Bit 13..11 = 000, LED 1 is Red
= 001, LED 1 is Yellow
= 010, LED 1 is Green
= 011, LED 1 is Blue
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 10..8 = 000, LED 1 indicates Power
= 001, LED 1 indicates Run
= 010, LED 1 indicates Attention
= 011, LED 1 indicates Fault
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 7..6 = 00, LED 0 is Off
= 01, LED 0 is On
= 10, LED 0 is Blinking
= 11, For LED 0 future use
Bit 5..3 = 000, LED 0 is Red
= 001, LED 0 is Yellow
= 010, LED 0 is Green
= 011, LED 0 is Blue
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use
Bit 2..0 = 000, LED 0 indicates Power
= 001, LED 0 indicates Run
= 010, LED 0 indicates Attention
= 011, LED 0 indicates Fault
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use "
::= { cpqSeCellEntry 15 }
cpqSeCellState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This value represents state of the cell"
::= { cpqSeCellEntry 16 }
cpqSeCellCLMRequestPercentage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The requested percentage of CLM memory to be configured in the cell."
::= { cpqSeCellEntry 17 }
cpqSeCellCLMRequestSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of requested CLM memory in the cell in kilobytes."
::= { cpqSeCellEntry 18 }
cpqSeCellCLMAllocatedSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of allocated CLM memory in the cell in kilobytes."
::= { cpqSeCellEntry 19 }
cpqSeCellInterleaveAllocatedSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of allocated interleaved memory in the cell
in kilobytes."
::= { cpqSeCellEntry 20 }
cpqSeCellHasInterleaveMem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"When set indicates that there is an interleaved memory
configured in the cell."
::= { cpqSeCellEntry 21 }
cpqSeCellSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the cell board serial number."
::= { cpqSeCellEntry 22 }
cpqSeCellCLMCondition OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The CLM (Cell Local Memory) settings condition of this cell."
::= { cpqSeCellEntry 23 }
-- ****************************************************************************
-- Standard Equipment I/O Chassis Table
-- ==================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeIOCTable (1.3.6.1.4.1.232.1.2.17)
--
-- An I/O chassis contains PCI devices on the system
--
--
-- ****************************************************************************
cpqSeIOCTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeIOCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of I/O chassis in the partition."
::= { cpqSeIOC 1 }
cpqSeIOCEntry OBJECT-TYPE
SYNTAX CpqSeIOCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A description of an I/O chassis in the system."
INDEX { cpqSeIOCUnitIndex }
::= { cpqSeIOCTable 1 }
CpqSeIOCEntry ::= SEQUENCE {
cpqSeIOCUnitIndex INTEGER,
cpqSeIOCCabinetNumber INTEGER,
cpqSeIOCBayNumber INTEGER,
cpqSeIOCIOCNumber INTEGER,
cpqSeIOCPowerState INTEGER,
cpqSeIOCLEDState INTEGER
}
cpqSeIOCUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..19)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a number that uniquely specifies the I/O chassis."
::= { cpqSeIOCEntry 1 }
cpqSeIOCCabinetNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents the cabinet that the I/O chassis belongs to.
The default value is 255 if the cabinet number can not be obtained."
::= { cpqSeIOCEntry 2 }
cpqSeIOCBayNumber OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-only
STATUS optional
DESCRIPTION
"This value indicates the bay in the cabinet where the I/O chassis resides."
::= { cpqSeIOCEntry 3 }
cpqSeIOCIOCNumber OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the I/O chassis number that is unique across the bay."
::= { cpqSeIOCEntry 4 }
cpqSeIOCPowerState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
powered-off(2),
powered-on(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This value indicates I/O chassis power state."
::= { cpqSeIOCEntry 5 }
cpqSeIOCLEDState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This value represents the state of a IO Chassis LED.
This is a bit-mapped value defined as follows.
Bit 31..30 = 00, LED 3 is Off
= 01, LED 3 is On
= 10, LED 3 is Blinking
= 11, For LED 3 future use
Bit 29..27 = 000, LED 3 is Red
= 001, LED 3 is Yellow
= 010, LED 3 is Green
= 011, LED 3 is Blue
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 26..24 = 000, LED 3 indicates Power
= 001, LED 3 indicates Run
= 010, LED 3 indicates Attention
= 011, LED 3 indicates Fault
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 23..22 = 00, LED 2 is Off
= 01, LED 2 is On
= 10, LED 2 is Blinking
= 11, For LED 2 future use
Bit 21..19 = 000, LED 2 is Red
= 001, LED 2 is Yellow
= 010, LED 2 is Green
= 011, LED 2 is Blue
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 18..16 = 000, LED 2 indicates Power
= 001, LED 2 indicates Run
= 010, LED 2 indicates Attention
= 011, LED 2 indicates Fault
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 15..14 = 00, LED 1 is Off
= 01, LED 1 is On
= 10, LED 1 is Blinking
= 11, For LED 1 future use
Bit 13..11 = 000, LED 1 is Red
= 001, LED 1 is Yellow
= 010, LED 1 is Green
= 011, LED 1 is Blue
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 10..8 = 000, LED 1 indicates Power
= 001, LED 1 indicates Run
= 010, LED 1 indicates Attention
= 011, LED 1 indicates Fault
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 7..6 = 00, LED 0 is Off
= 01, LED 0 is On
= 10, LED 0 is Blinking
= 11, For LED 0 future use
Bit 5..3 = 000, LED 0 is Red
= 001, LED 0 is Yellow
= 010, LED 0 is Green
= 011, LED 0 is Blue
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use
Bit 2..0 = 000, LED 0 indicates Power
= 001, LED 0 indicates Run
= 010, LED 0 indicates Attention
= 011, LED 0 indicates Fault
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use "
::= { cpqSeIOCEntry 6 }
-- ****************************************************************************
-- Standard Equipment Partition Structure
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePartition (1.3.6.1.4.1.232.1.2.18)
--
-- A partition can have many cells spread across cabinets.
--
--
-- ****************************************************************************
cpqSePartitionTotalCPU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the number of logical CPUs in the partition. Zero will be returned
if the value can not be determined."
::= { cpqSePartition 1 }
cpqSePartitionAvailableCellSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the number of available cell slots in the partition.
Zero will be returned if the value can not be determined."
::= { cpqSePartition 2 }
cpqSePartitionInstalledCells OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the number of installed cells in the partition. Zero
will be returned if the value can not be determined."
::= { cpqSePartition 3 }
cpqSePartitionPoweredOnCells OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This denotes the number of powered on cells in the partition.
Zero will be returned if the value can not be determined."
::= { cpqSePartition 4 }
cpqSePartitionReadyForReconfigCells OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the cells that are ready for reconfiguration.
Zero will be returned if the value can not be determined."
::= { cpqSePartition 5 }
cpqSePartitionMemInterleavingType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents memory interleaving type for the partition.
Zero will be returned if the value can not be determined."
::= { cpqSePartition 6}
cpqSePartitionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the partition name."
::= { cpqSePartition 7}
cpqSePartitionCoreCell OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The cell slot number of the partition's core cell."
::= { cpqSePartition 8}
cpqSePartitionCoreCellCabinet OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The cabinet number of the partition's core cell."
::= { cpqSePartition 9}
cpqSePartitionCLMRequestPercentage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The requested percentage of CLM memory to be configured in the
partition."
::= { cpqSePartition 10}
cpqSePartitionCLMRequestSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of requested CLM memory in the partition in kilobytes."
::= { cpqSePartition 11}
cpqSePartitionCLMAllocatedSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of allocated CLM memory in the partition in
kilobytes."
::= { cpqSePartition 12}
cpqSePartitionInterleaveAllocatedSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of allocated interleaved memory in the partition
in kilobytes."
::= { cpqSePartition 13}
cpqSePartitionHasInterleaveMem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"When set, it indicates that there is an interleaved memory
configured in the partition."
::= { cpqSePartition 14}
cpqSePartitionNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the logical partition number of the current
partition in the complex."
::= { cpqSePartition 15}
-- ****************************************************************************
-- Standard Equipment Cabinet Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeCabinetTable (1.3.6.1.4.1.232.1.2.19)
--
-- A cabinet contains many cells and/or I/O chassis
--
--
-- ****************************************************************************
cpqSeCabinetTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeCabinetEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of cabinets that contain cells in the partition."
::= { cpqSeCabinet 1 }
cpqSeCabinetEntry OBJECT-TYPE
SYNTAX CpqSeCabinetEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A description of a cabinet in the system."
INDEX { cpqSeCabinetUnitIndex }
::= { cpqSeCabinetTable 1 }
CpqSeCabinetEntry ::= SEQUENCE {
cpqSeCabinetUnitIndex INTEGER,
cpqSeCabinetCPULED TruthValue,
cpqSeCabinetIOXLED TruthValue,
cpqSeCabinetTypeNum INTEGER,
cpqSeCabinetLED INTEGER
}
cpqSeCabinetUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a number that uniquely specifies the cabinet."
::= { cpqSeCabinetEntry 1 }
cpqSeCabinetCPULED OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents the on/off state of compute cabinet LED."
::= { cpqSeCabinetEntry 2 }
cpqSeCabinetIOXLED OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents the on/off state of IOX cabinet LED."
::= { cpqSeCabinetEntry 3 }
cpqSeCabinetTypeNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This value represents type and number of a compute or IOX cabinet.
Bit 31..16 = 0x0000, type of cabinet is Thin Boy
Bit 31..16 = 0x0001, type of cabinet is Fat Boy
Bit 31..16 = 0x0002, type of cabinet is Dome Lite
Bit 31..16 = 0x0003, type of cabinet is Key Stone
Bit 31..16 = 0x0004, type of cabinet is Matter Horn
Bit 31..16 = 0x0080, type of cabinet is IOX
Bit 15..0, represents the compute cabinet number."
::= { cpqSeCabinetEntry 4 }
cpqSeCabinetLED OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This value represents the state of a cabinet LED.
This is a bit-mapped value defined as follows.
Bit 31..30 = 00, LED 3 is Off
= 01, LED 3 is On
= 10, LED 3 is Blinking
= 11, For LED 3 future use
Bit 29..27 = 000, LED 3 is Red
= 001, LED 3 is Yellow
= 010, LED 3 is Green
= 011, LED 3 is Blue
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 26..24 = 000, LED 3 indicates Power
= 001, LED 3 indicates Run
= 010, LED 3 indicates Attention
= 011, LED 3 indicates Fault
= 100, For LED 3 future use
= 101, For LED 3 future use
= 110, For LED 3 future use
= 111, For LED 3 future use
Bit 23..22 = 00, LED 2 is Off
= 01, LED 2 is On
= 10, LED 2 is Blinking
= 11, For LED 2 future use
Bit 21..19 = 000, LED 2 is Red
= 001, LED 2 is Yellow
= 010, LED 2 is Green
= 011, LED 2 is Blue
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 18..16 = 000, LED 2 indicates Power
= 001, LED 2 indicates Run
= 010, LED 2 indicates Attention
= 011, LED 2 indicates Fault
= 100, For LED 2 future use
= 101, For LED 2 future use
= 110, For LED 2 future use
= 111, For LED 2 future use
Bit 15..14 = 00, LED 1 is Off
= 01, LED 1 is On
= 10, LED 1 is Blinking
= 11, For LED 1 future use
Bit 13..11 = 000, LED 1 is Red
= 001, LED 1 is Yellow
= 010, LED 1 is Green
= 011, LED 1 is Blue
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 10..8 = 000, LED 1 indicates Power
= 001, LED 1 indicates Run
= 010, LED 1 indicates Attention
= 011, LED 1 indicates Fault
= 100, For LED 1 future use
= 101, For LED 1 future use
= 110, For LED 1 future use
= 111, For LED 1 future use
Bit 7..6 = 00, LED 0 is Off
= 01, LED 0 is On
= 10, LED 0 is Blinking
= 11, For LED 0 future use
Bit 5..3 = 000, LED 0 is Red
= 001, LED 0 is Yellow
= 010, LED 0 is Green
= 011, LED 0 is Blue
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use
Bit 2..0 = 000, LED 0 indicates Power
= 001, LED 0 indicates Run
= 010, LED 0 indicates Attention
= 011, LED 0 indicates Fault
= 100, For LED 0 future use
= 101, For LED 0 future use
= 110, For LED 0 future use
= 111, For LED 0 future use "
::= { cpqSeCabinetEntry 5 }
-- ****************************************************************************
-- Standard Equipment Complex Structure
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeComplex (1.3.6.1.4.1.232.1.2.20)
-- cpqSeComplexCellSlotStatusTable (1.3.6.1.4.1.232.1.2.20.7)
--
--
-- A complex can have at most 4 cabinets
--
--
-- ****************************************************************************
cpqSeComplexUUID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the complex UUID."
::= { cpqSeComplex 1 }
cpqSeComplexTotalCabinet OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the total number of cabinets in the complex.
Zero will be returned if the value can not be determined."
::= { cpqSeComplex 2 }
cpqSeComplexComputeCabinet OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is the number of compute cabinets in the complex."
::= { cpqSeComplex 3 }
cpqSeComplexIOXCabinet OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS optional
DESCRIPTION
"This denotes the number of IOX cabinets in the complex."
::= { cpqSeComplex 4 }
cpqSeComplexName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the complex name."
::= { cpqSeComplex 5 }
cpqSeComplexLockedProperty OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Bit 31 - Indicates that there is a locked IPMI property when set.
Bit 7:0 - Contains the property number currently locked."
::= { cpqSeComplex 6 }
cpqSeComplexCellSlotStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeComplexCellSlotStatusEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table of cell slot status in a complex."
::= { cpqSeComplex 7 }
cpqSeComplexCellSlotStatusEntry OBJECT-TYPE
SYNTAX CpqSeComplexCellSlotStatusEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A cell slot status description."
INDEX { cpqSeComplexCellSlotStatusIndex }
::= { cpqSeComplexCellSlotStatusTable 1 }
CpqSeComplexCellSlotStatusEntry ::= SEQUENCE {
cpqSeComplexCellSlotStatusIndex INTEGER,
cpqSeComplexCellSlotStatusCabinetNo INTEGER,
cpqSeComplexCellSlotStatusSlotNo INTEGER,
cpqSeComplexCellSlotStatus INTEGER,
cpqSeComplexCellSlotPartitionNo INTEGER,
cpqSeComplexCellSlotPartitionName DisplayString
}
cpqSeComplexCellSlotStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The table index of cell slot status in a complex.
This value is a unique index for a row in the table of complex
cell slot status."
::= { cpqSeComplexCellSlotStatusEntry 1 }
cpqSeComplexCellSlotStatusCabinetNo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The cabinet number of this cell slot."
::= { cpqSeComplexCellSlotStatusEntry 2 }
cpqSeComplexCellSlotStatusSlotNo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of this cell slot."
::= { cpqSeComplexCellSlotStatusEntry 3 }
cpqSeComplexCellSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
active(2),
inactive(3),
assigned-powered-off(4),
free-powered-on(5),
free-powered-off(6),
empty(7)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The status of this cell slot."
::= { cpqSeComplexCellSlotStatusEntry 4 }
cpqSeComplexCellSlotPartitionNo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The partition number this cell is assigned."
::= { cpqSeComplexCellSlotStatusEntry 5 }
cpqSeComplexCellSlotPartitionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The partition this cell belongs to."
::= { cpqSeComplexCellSlotStatusEntry 6 }
-- ****************************************************************************
-- Standard Equipment LED Table
-- ============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeLED (1.3.6.1.4.1.232.1.2.21)
--
-- This is a generic table of LEDs in the system
--
-- ****************************************************************************
cpqSeLEDTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSeLEDEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of LEDs in the system."
::= { cpqSeLED 1 }
cpqSeLEDEntry OBJECT-TYPE
SYNTAX CpqSeLEDEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"An entry of an LED in the system."
INDEX { cpqSeLEDIndex }
::= { cpqSeLEDTable 1 }
CpqSeLEDEntry ::= SEQUENCE {
cpqSeLEDIndex INTEGER,
cpqSeLEDState INTEGER,
cpqSeLEDStateDuration INTEGER,
cpqSeLEDLocationType INTEGER,
cpqSeLEDDescription DisplayString,
cpqSeLEDHardwareLocation DisplayString
}
cpqSeLEDIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"This is a number that uniquely identifies the LED."
::= { cpqSeLEDEntry 1 }
cpqSeLEDState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This value represents the state of an LED.
Bit 31..24 = ON-duration time in unit of 0.1 sec
Bit 23..16 = OFF-duration time in unit of 0.1 sec
Bit 15..8 = 0, LED state is OFF
= 1, LED state is ON
= 2, LED state is BLINKING
Bit 7..0 = 0, invalid color value
= 1, LED color is Brown
= 2, LED color is Red
= 3, LED color is Orange
= 4, LED color is Yellow
= 5, LED color is Green
= 6, LED color is Blue
= 7, LED color is Violet
= 8, LED color is Gray
= 9, LED color is White "
::= { cpqSeLEDEntry 2 }
cpqSeLEDStateDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"This is the duration of an LED state in seconds. "
::= { cpqSeLEDEntry 3 }
cpqSeLEDLocationType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"This value indicates whether an LED is internal or external.
0 = External
1 = Internal "
::= { cpqSeLEDEntry 4 }
cpqSeLEDDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"Description of the LED entry."
::= { cpqSeLEDEntry 5 }
cpqSeLEDHardwareLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"Description of the location of an LED entry."
::= { cpqSeLEDEntry 6 }
-- Below table has been deprecated in 870 release and merged with cpqSeUSBPortEntry
-- ****************************************************************************
-- Standard Equipment USB Device Group
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSeUSBDevice Group (1.3.6.1.4.1.232.1.2.22)
--
-- The cpqSeUSBDevice group lists the USB Devices in the system.
--
-- Implementation of the cpqSeUSBDevice group is optional.
-- Support for the cpqSeUSBDevice group is MANDATORY for all systems that
-- contain a USB bus.
--
-- ****************************************************************************
cpqSeUSBDeviceType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"Attached USB device type."
::= { cpqSeUSBDevice 1 }
cpqSeUSBDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"Attached USB device name."
::= { cpqSeUSBDevice 2 }
-- ****************************************************************************
-- Standard Equipment PCIe Disk Table
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqStdEquipment Group (1.3.6.1.4.1.232.1)
-- cpqSeComponent Group (1.3.6.1.4.1.232.1.2)
-- cpqSePCIeDisk Group (1.3.6.1.4.1.232.1.2.23)
-- cpqSePCIeDiskTable (1.3.6.1.4.1.232.1.2.23.1)
--
-- The PCIe disk group describes the drives directly attached to a PCIe
-- controller in the system.
--
-- Implementation of the PCIe Disk group is optional for all agents
-- supporting the Standard Equipment MIB.
--
-- ****************************************************************************
cpqSePCIeDiskTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSePCIeDiskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table of PCIe disk descriptions."
::= { cpqSePCIeDisk 1 }
cpqSePCIeDiskEntry OBJECT-TYPE
SYNTAX CpqSePCIeDiskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A PCIe disk table entry."
INDEX { cpqSePCIeDiskPCIBusIndex, cpqSePCIeDiskPCIDeviceIndex,
cpqSePCIeDiskPCIFunctionIndex }
::= { cpqSePCIeDiskTable 1 }
CpqSePCIeDiskEntry ::= SEQUENCE {
cpqSePCIeDiskPCIBusIndex INTEGER,
cpqSePCIeDiskPCIDeviceIndex INTEGER,
cpqSePCIeDiskPCIFunctionIndex INTEGER,
cpqSePCIeDiskModel DisplayString,
cpqSePCIeDiskFwRev DisplayString,
cpqSePCIeDiskSerialNumber DisplayString,
cpqSePCIeDiskCapacityMB Gauge,
cpqSePCIeDiskCondition INTEGER,
cpqSePCIeDiskCurrentTemperature INTEGER,
cpqSePCIeDiskThresholdTemperature INTEGER,
cpqSePCIeDiskHwLocation DisplayString,
cpqSePCIeDiskOsName DisplayString,
cpqSePCIeDiskWearStatus INTEGER,
cpqSePCIeDiskPowerOnHours Counter,
cpqSePCIeDiskPercntEndrnceUsed Gauge
}
cpqSePCIeDiskPCIBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"The PCI bus number for this disk's controller."
::= { cpqSePCIeDiskEntry 1 }
cpqSePCIeDiskPCIDeviceIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"The PCI device number for this disk's controller."
::= { cpqSePCIeDiskEntry 2 }
cpqSePCIeDiskPCIFunctionIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"The PCI function number for this disk's controller."
::= { cpqSePCIeDiskEntry 3 }
cpqSePCIeDiskModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the disk model.
A NULL string indicates that the disk model could not
be determined or is irrelevant."
::= { cpqSePCIeDiskEntry 4 }
cpqSePCIeDiskFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The firmware version of the disk."
::= { cpqSePCIeDiskEntry 5 }
cpqSePCIeDiskSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"The serial number of the disk."
::= { cpqSePCIeDiskEntry 6 }
cpqSePCIeDiskCapacityMB OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS optional
DESCRIPTION
"The size of the disk in MB (Megabytes)."
::= { cpqSePCIeDiskEntry 7 }
cpqSePCIeDiskCondition OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The condition of the disk."
::= { cpqSePCIeDiskEntry 8 }
cpqSePCIeDiskCurrentTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The current temperature of the disk in degrees Celsius."
::= { cpqSePCIeDiskEntry 9 }
cpqSePCIeDiskThresholdTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The upper critical threshold temperature of the disk in
degrees Celsius."
::= { cpqSePCIeDiskEntry 10 }
cpqSePCIeDiskHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location of the disk itself.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSePCIeDiskEntry 11 }
cpqSePCIeDiskOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"PCIe Physical Drive OS Name.
The OS name for this PCIe physical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqSePCIeDiskEntry 12 }
cpqSePCIeDiskWearStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
fiftySixDayThreshold(3),
fivePercentThreshold(4),
twoPercentThreshold(5),
ssdWearOut(6)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Wear Status of a PCIe Disk.
This shows the wear status of the solid state PCIe physical drive.
The following values are valid for the physical drive solid state
wear status:
Other (1)
The instrument agent is unable to determine the physical drive<76>s
solid state disk wear status. This value would be used for non
SSD drives or SSD drives that do not support wear reporting.
Ok (2)
Indicates the solid state disk is not in any imminent danger
of wear out.
Fifty Six Day Threshold Passed (3)
Indicates that based upon the current workload, the solid state
disk will reach the maximum usage limit for writes (wear out)
within fifty-six days. You should modify your write workload or
begin preparing to replace your SSD drive.
Five Percent Threshold Passed (4)
Indicates that the solid state disk has passed the five percent
threshold and is at or below five percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
Two Percent Threshold Passed (5)
Indicates that the solid state disk has passed the two percent
threshold and is at or below two percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
SSD Wear Out(6)
Indicates that a solid state drive is approaching the maximum
usage limit for writes (wear out) and should be replaced as soon
as possible."
::= { cpqSePCIeDiskEntry 13 }
cpqSePCIeDiskPowerOnHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS optional
DESCRIPTION
"PCIe Disk Power On Hours.
This is the total number of hours that the PCIe disk
has been powered on. This value will be 4,294,967,295 if the disk
power on hours cannot be determined or is not supported."
::= { cpqSePCIeDiskEntry 14 }
cpqSePCIeDiskPercntEndrnceUsed OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS optional
DESCRIPTION
"PCIe Drive Percent Endurance Used.
This value specifies the hundredths of the percentage disk life used.
The value of this field is allowed to exceed 100%.
As an example, if the value reported is 50, this would indicate .50
percent endurance used.
This value will be 4,294,967,295 if the percent endurance used cannot
be determined or is not supported."
::= { cpqSePCIeDiskEntry 15 }
cpqSePCIeDiskTableCondition OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The overall condition of PCIe Disk table."
::= { cpqSePCIeDisk 2 }
-- ****************************************************************************
-- Standard Equipment MIB Trap Definitions
-- =======================================
--
-- The SNMP trap messages must not be bigger than 484 octets (bytes).
--
-- Trap support in an SNMP agent implementation is optional. An SNMP
-- agent implementation may support all, some, or none of the traps.
-- If traps are supported, The user should be provided with the option of
-- disabling traps.
-- **************************************************************************
-- Deprecated in 7.20 trap 1005 is the replacement
cpqSeCpuThresholdPassed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeCpuSlot, cpqSeCpuSocketNumber}
DESCRIPTION
"This trap is sent when an internal CPU error threshold has been
passed on a particular CPU causing it to go degraded. This trap
will be sent when cpqSeCpuThreshPassed transitions from false to
true."
--#TYPE "CPU error threshold passed (1001)"
--#SUMMARY "CPU internal corrected errors have passed a set threshold."
--#ARGUMENTS {}
--#SEVERITY MINOR
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY PROCESSORS
::= 1001
cpqSePCCardThermalDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCCardDeviceInfo,
cpqSePCCardProductInfo, cpqSePCCardSlotIndex }
DESCRIPTION
"This trap is sent when the PC Card Slot Thermal Sensor threshold has been
exceeded for safe operations thereby causing degraded operations. This trap
will be sent when cpqSePCCardStatus transitions from Normal (1) to Thermal
Degraded (2).
The manufacturer and product information strings as well as the slot number
for the degraded PC Card is provided as parameters for this trap."
--#TYPE "PC Card Thermal Degraded Status (1002)"
--#SUMMARY "Safe PC card %d thermal operating conditions exceeded."
--#ARGUMENTS {4}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY THERMAL
::= 1002
cpqSePCCardThermalFailure TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCCardDeviceInfo,
cpqSePCCardProductInfo, cpqSePCCardSlotIndex }
DESCRIPTION
"This trap is sent when the PC Card Slot Thermal Sensor threshold has been
exceeded for degraded operations thereby causing failed operations.
This trap will be sent when cpqSePCCardStatus transitions from Thermal Degraded
(2) to Thermal Failure (3).
The manufacturer and product information strings as well as the slot number
for the failed PC Card is provided as parameters for this trap."
--#TYPE "PC Card Thermal Failure Status (1003)"
--#SUMMARY "Degraded PC card %d thermal operating conditions exceeded."
--#ARGUMENTS {4}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE NONOPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY THERMAL
::= 1003
cpqSePCCardThermalSafe TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCCardSlotIndex }
DESCRIPTION
"This trap is sent when the PC Card Slot Thermal Sensor threshold has been
crossed which restored the thermal status to normal operations. This trap will be sent
when cpqSePCCardStatus transitions from Thermal Degraded (2) or Thermal Failure
(3) to Normal (1).
The number of the recovered PC Card slot is provided as a parameter for this trap."
--#TYPE "PC Card Thermal Safe Operations Status (1004)"
--#SUMMARY "Degraded/Failed PC card %d thermal conditions restored to safe operations."
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY THERMAL
::= 1004
-- Updated for 7.20 trap replaced 1001
cpqSe2CpuThresholdPassed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeCpuSlot, cpqSeCpuSocketNumber,
cpqSeCpuSpeed, cpqSeCpuExtSpeed, cpqSeCpuCacheSize}
DESCRIPTION
"This trap is sent when an internal CPU error threshold has been
passed on a particular CPU causing it to go degraded. This trap
will be sent when cpqSeCpuThreshPassed transitions from false to
true."
--#TYPE "CPU error threshold passed (1005)"
--#SUMMARY "CPU internal corrected errors have passed a set threshold for processor in slot %d, socket %d."
--#ARGUMENTS {2, 3}
--#SEVERITY MINOR
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY PROCESSORS
::= 1005
cpqSeCpuStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeCpuUnitIndex,
cpqSeCpuSlot, cpqSeCpuName, cpqSeCpuSpeed,
cpqSeCpuStep, cpqSeCpuStatus,
cpqSeCpuExtSpeed, cpqSeCpuSocketNumber,
cpqSeCpuHwLocation}
DESCRIPTION
"This trap is sent when CPU status changed.
CPU can be brought down to Stop state and removed
from O.S Active set or Brought back to Running state
and made member of O.S Active set.
User Action: None."
--#TYPE "Processor Monitor Event Trap"
--#SUMMARY "The state of the processor in slot %d is %d."
--#ARGUMENTS {3, 7}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY PROCESSORS
::= 1006
cpqSeCpuPowerPodstatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeCpuUnitIndex,
cpqSeCpuSlot, cpqSeCpuName, cpqSeCpuSpeed,
cpqSeCpuStep, cpqSeCpuPowerpodStatus,
cpqSeCpuExtSpeed, cpqSeCpuSocketNumber,
cpqSeCpuHwLocation}
DESCRIPTION
"This Trap is sent if CPU Power Pod status changes.
User Action: None."
--#TYPE "Processor Monitor Event Trap"
--#SUMMARY "Processor in slot %d power supply status is %d."
--#ARGUMENTS {3, 7}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY PROCESSORS
::= 1007
cpqSeUSBStorageDeviceAttached TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName }
DESCRIPTION
"This trap is sent when a USB storage device has been attached "
--#TYPE "USB storage device attached (1008)"
--#SUMMARY "A USB storage device has been attached to the system."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY NONE
--#LIFECYCLE
::= 1008
cpqSeUSBStorageDeviceRemoved TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName }
DESCRIPTION
"This trap is sent when a attached USB storage device is removed "
--#TYPE "USB storage device removed (1009)"
--#SUMMARY "A USB storage device has been removed from the system."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY NONE
--#LIFECYCLE
::= 1009
cpqSeUSBStorageDeviceReadErrorOccurred TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName,
cpqSeUSBPortDeviceModel, cpqSeUSBPortDeviceFWVersion,
cpqSeUSBPortDeviceSerialNumber, cpqSeUSBPortDevicePartNumber,
cpqSeUSBPortDeviceReadErrorCount, cpqSeUSBPortDeviceReadThreshold,
cpqSeUSBPortDeviceLastSlotWithError }
DESCRIPTION
"This trap is sent when a read error occured on the attached USB storage device "
--#TYPE "USB storage device read error occurred (1010)"
--#SUMMARY "A read error occurred on the Flash Media in Slot %d of a USB storage device attached to the system."
--#ARGUMENTS {10}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
--#LIFECYCLE
::= 1010
cpqSeUSBStorageDeviceWriteErrorOccurred TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName,
cpqSeUSBPortDeviceModel, cpqSeUSBPortDeviceFWVersion,
cpqSeUSBPortDeviceSerialNumber, cpqSeUSBPortDevicePartNumber,
cpqSeUSBPortDeviceWriteErrorCount, cpqSeUSBPortDeviceWriteThreshold,
cpqSeUSBPortDeviceLastSlotWithError }
DESCRIPTION
"This trap is sent when a write error occured on the attached USB storage device "
--#TYPE "USB storage device write error occurred (1011)"
--#SUMMARY "A write error occurred on the Flash Media in Slot %d of a USB storage device attached to the system."
--#ARGUMENTS {10}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
--#LIFECYCLE
::= 1011
cpqSeUSBStorageDeviceRedundancyLost TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName,
cpqSeUSBPortDeviceModel, cpqSeUSBPortDeviceFWVersion,
cpqSeUSBPortDeviceSerialNumber, cpqSeUSBPortDevicePartNumber,
cpqSeUSBPortDeviceFailedSlot }
DESCRIPTION
"This trap is sent when redundancy is lost on the attached USB storage device.
User Action: Replace the failed USB Storage Device."
--#TYPE "USB storage device redundancy lost (1012)"
--#SUMMARY "Redundancy is lost on a USB storage device attached to the system. Flash Media in Slot %d has failed."
--#ARGUMENTS {8}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#LIFECYCLE
::= 1012
cpqSeUSBStorageDeviceRedundancyRestored TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName,
cpqSeUSBPortDeviceModel, cpqSeUSBPortDeviceFWVersion,
cpqSeUSBPortDeviceSerialNumber, cpqSeUSBPortDevicePartNumber }
DESCRIPTION
"This trap is sent when redundancy is restored on the attached USB storage device. "
--#TYPE "USB storage device redundancy restored (1013)"
--#SUMMARY "Redundancy is restored on a USB storage device attached to the system."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
--#LIFECYCLE
::= 1013
cpqSeUSBStorageDeviceSyncFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSeUSBPortIndex, cpqSeUSBPortDeviceName,
cpqSeUSBPortDeviceModel, cpqSeUSBPortDeviceFWVersion,
cpqSeUSBPortDeviceSerialNumber, cpqSeUSBPortDevicePartNumber }
DESCRIPTION
"This trap is sent when the sync operation to restore redundancy failed on the attached USB storage device.
User Action: Replace the failed USB Storage Device."
--#TYPE "USB storage device sync failed (1014)"
--#SUMMARY "Sync operation to restore redundancy failed on a USB storage device attached to the system."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#LIFECYCLE
::= 1014
cpqSePCIeDiskTemperatureFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCIeDiskPCIBusIndex, cpqSePCIeDiskPCIDeviceIndex,
cpqSePCIeDiskPCIFunctionIndex, cpqSePCIeDiskCurrentTemperature,
cpqSePCIeDiskThresholdTemperature, cpqSePCIeDiskHwLocation }
DESCRIPTION
"The temperature of the disk has crossed the upper critical threshold."
--#TYPE "PCIe Disk Thermal Failure (1015)"
--#SUMMARY "The temperature of the PCIe disk at location %s has crossed the upper critical threshold."
--#ARGUMENTS {7}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE DEGRADED
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Check the system for hardware failures and verify the environment is properly cooled."
::= 1015
cpqSePCIeDiskTemperatureOk TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCIeDiskPCIBusIndex, cpqSePCIeDiskPCIDeviceIndex,
cpqSePCIeDiskPCIFunctionIndex, cpqSePCIeDiskCurrentTemperature,
cpqSePCIeDiskThresholdTemperature, cpqSePCIeDiskHwLocation }
DESCRIPTION
"The temperature of the disk has been set to ok.
The PCIe Disk's temperature has returned to the normal operating range."
--#TYPE "PCIe Disk Thermal Status OK (1016)"
--#SUMMARY "The temperature of the PCIe disk at location %s is normal."
--#ARGUMENTS {7}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
::= 1016
cpqSePCIeDiskConditionChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCIeDiskPCIBusIndex, cpqSePCIeDiskPCIDeviceIndex,
cpqSePCIeDiskPCIFunctionIndex, cpqSePCIeDiskCondition, cpqSePCIeDiskHwLocation }
DESCRIPTION
"PCIe Disk Status Change
A change in condition of PCIe disk has been detected. The current PCIe disk condition is
indicated in the cpqSePCIeDiskCondition variable.
User Action: If cpqSePCIeDiskCondition is 'failed(4)', replace the drive."
--#TYPE "PCIe Disk Condition Change (1017)"
--#SUMMARY "The status of the PCIe disk at location %s is %d."
--#ARGUMENTS {6, 5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE DEGRADED
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If cpqSePCIeDiskCondition is 'failed(4)', replace the drive."
::= 1017
cpqSePCIeDiskWearStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePCIeDiskPCIBusIndex, cpqSePCIeDiskPCIDeviceIndex,
cpqSePCIeDiskPCIFunctionIndex, cpqSePCIeDiskWearStatus, cpqSePCIeDiskHwLocation }
DESCRIPTION
"PCIe Disk Wear Status Change.
This trap signifies that the agent has detected a change in the PCIe Disk wear
status. The variable cpqSePCIeDiskWearStatus indicates the current wear status.
User Action: If cpqSePCIeDiskWearStatus is 'ssdWearOut(6)',
replace the drive."
--#TYPE "PCIe Disk Wear Status Change (1018)"
--#SUMMARY "The PCIe disk wear status for the disk at location %s is %d."
--#ARGUMENTS {5, 6}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the PCIe disk wear status is 'ssdWearOut(6)', replace the drive."
::= 1018
cpqSePciDeviceAddedOrPoweredOn TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePciFunctBusNumberIndex,
cpqSePciFunctDeviceNumberIndex, cpqSePciFunctIndex }
DESCRIPTION
"This trap is sent when a PCI device has been added or powered on."
--#TYPE "PCI Device added or powered on (1019)"
--#SUMMARY "A PCI device at Bus %d, Device %, Function % has been added to the system or powered on."
--#ARGUMENTS {2, 3, 4}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
::= 1019
cpqSePciDeviceRemovedOrPoweredOff TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSePciFunctBusNumberIndex,
cpqSePciFunctDeviceNumberIndex, cpqSePciFunctIndex }
DESCRIPTION
"This trap is sent when a PCI device has been removed or powered off."
--#TYPE "PCI Device removed or powered off (1020)"
--#SUMMARY "A PCI device at Bus %d, Device %, Function % has been removed from the system or powered off."
--#ARGUMENTS {2, 3, 4}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
::= 1020
END
Reference in New Issue Copy Permalink