mibs/MIBS/hp/HP-CAR-MIB

266 lines
6.6 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Commited Access Rate MIB file.
-- *****************************************************************
HP-CAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
Gauge
FROM RFC1155-SMI
Counter64
FROM SNMPv2-SMI
snCAR
FROM HP-SN-SWITCH-GROUP-MIB;
snPortCARs OBJECT IDENTIFIER ::= { snCAR 1 }
PacketSource ::= INTEGER {
input(0), --for inbound traffic
output(1) --for outbound traffic
}
RateLimitType ::= INTEGER {
all(3), -- all traffic.
quickAcc(2), -- traffic matches rate-limit's access list.
standardAcc(1) -- traffic matches standard access list.
}
RateLimitAction ::= INTEGER {
continue(1),
drop(2),
precedCont(3),
precedXmit(4),
xmit(5)
}
snPortCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPortCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of rate limit configuration entries.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic."
::= { snPortCARs 1 }
snPortCAREntry OBJECT-TYPE
SYNTAX SnPortCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of rate-limit configuration objects on this
interface."
INDEX { snPortCARifIndex, snPortCARDirection, snPortCARRowIndex }
::= { snPortCARTable 1 }
SnPortCAREntry ::=
SEQUENCE {
snPortCARifIndex
INTEGER,
snPortCARDirection
PacketSource,
snPortCARRowIndex
INTEGER,
snPortCARType
RateLimitType,
snPortCARAccIdx
INTEGER,
snPortCARRate
INTEGER,
snPortCARLimit
INTEGER,
snPortCARExtLimit
INTEGER,
snPortCARConformAction
RateLimitAction,
snPortCARExceedAction
RateLimitAction,
snPortCARStatSwitchedPkts
Counter64,
snPortCARStatSwitchedBytes
Counter64,
snPortCARStatFilteredPkts
Counter64,
snPortCARStatFilteredBytes
Counter64,
snPortCARStatCurBurst
Gauge
}
snPortCARifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value for this rate limit entry."
::= { snPortCAREntry 1 }
snPortCARDirection OBJECT-TYPE
SYNTAX PacketSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input or output transmission direction for the
Rate Limit object.
input (0), --for inbound traffic
output(1) --for outbound traffic "
::= { snPortCAREntry 2 }
snPortCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for rate limit objects.
It increases as the rate limit entries are added.
Skips the number when a row is deleted."
::= { snPortCAREntry 3 }
snPortCARType OBJECT-TYPE
SYNTAX RateLimitType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic rate-limited against."
::= { snPortCAREntry 4 }
snPortCARAccIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the access list if RateLimitType is either
quickAcc or standardAcc."
::= { snPortCAREntry 5 }
snPortCARRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The comitted access rate. This determines the long term
average transmission rate. Traffic that falls under this
rate always conforms. This is average rate in bits per
second."
::= { snPortCAREntry 6 }
snPortCARLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the normal burst size that determines how large traffic
bursts can be before some traffic exceeds the rate limit. This
specifies the number of bytes that are guaranteed to be transported
by the network at the average rate under normal conditions during
committed time interval. This normal burst size is in bytes."
::= { snPortCAREntry 7 }
snPortCARExtLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the extended burst limit that determines how large traffic
bursts can be before all the traffic exceeds the rate limit. This
burst size is in bytes."
::= { snPortCAREntry 8 }
snPortCARConformAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic is within
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 9 }
snPortCARExceedAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic exceeds
the Rate Limit.drop
drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 10 }
snPortCARStatSwitchedPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { snPortCAREntry 11 }
snPortCARStatSwitchedBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes permitted by this interface."
::= { snPortCAREntry 12 }
snPortCARStatFilteredPkts OBJECT-TYPE
SYNTAX Counter64
--UNITS "packets"
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { snPortCAREntry 13 }
snPortCARStatFilteredBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { snPortCAREntry 14 }
snPortCARStatCurBurst OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current received burst size."
::= { snPortCAREntry 15 }
-- end of snPortCARTable
END