mibs/MIBS/hp/HP-ICF-GPPC-MIB

564 lines
24 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
HP-ICF-GPPC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
PortList
FROM Q-BRIDGE-MIB
hpSwitch
FROM HP-ICF-OID;
hpicfGppcMIB MODULE-IDENTITY
LAST-UPDATED "200709271125Z"
ORGANIZATION "Hewlett Packard Company,
Procurve Networking Business"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module is for HP proprietary
General Purpose Packet Control (GPPC)"
REVISION "200709271125Z"
DESCRIPTION "Initial revision."
::= { hpSwitch 41 }
-- ***********************************************
-- TEXTUAL Conventions
-- ***********************************************
HpicfGppcPolicyName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for the name of a policy.
A policy name is a printable string consisting
of up to 64 characters from the ASCII character
set."
SYNTAX OCTET STRING (SIZE(1..32))
-- ***********************************************
-- Start of MIB Objects
-- ***********************************************
hpicfGppcConformance OBJECT IDENTIFIER ::= { hpicfGppcMIB 1 }
-- ***********************************************
-- GPPC application control table
-- ***********************************************
hpicfGppcAppControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfGppcAppControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The application control table. This keeps track
of the applications that use GPPC, the policies
set by these applications, and information on
where/when/how to apply these policies.
This information includes the interfaces and VLANs
where the policy should be applied, whether it
should be applied at ingress or egress, and when it
should expire."
::= { hpicfGppcMIB 2 }
hpicfGppcAppControlEntry OBJECT-TYPE
SYNTAX HpicfGppcAppControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the application control table."
INDEX { hpicfGppcAcAppName,
hpicfGppcAcAppInstance,
hpicfGppcAcPolicyName }
::= { hpicfGppcAppControlTable 1 }
HpicfGppcAppControlEntry ::=
SEQUENCE {
hpicfGppcAcAppName SnmpAdminString,
hpicfGppcAcAppInstance SnmpAdminString,
hpicfGppcAcPolicyName HpicfGppcPolicyName,
hpicfGppcAcIngressIfList PortList,
hpicfGppcAcIngressVlanMap1k OCTET STRING,
hpicfGppcAcIngressVlanMap2k OCTET STRING,
hpicfGppcAcIngressVlanMap3k OCTET STRING,
hpicfGppcAcIngressVlanMap4k OCTET STRING,
hpicfGppcAcEgressIfList PortList,
hpicfGppcAcEgressVlanMap1k OCTET STRING,
hpicfGppcAcEgressVlanMap2k OCTET STRING,
hpicfGppcAcEgressVlanMap3k OCTET STRING,
hpicfGppcAcEgressVlanMap4k OCTET STRING,
hpicfGppcAcExpPolicy INTEGER,
hpicfGppcAcExpString OCTET STRING,
hpicfGppcAcLastErrorCode INTEGER,
hpicfGppcAcLastErrorString OCTET STRING,
hpicfGppcAcRowAdminStatus INTEGER,
hpicfGppcAcRowStatus RowStatus
}
hpicfGppcAcAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of the application that last modified this
row. All applications of the same type should use
the same name and should use different instance
identifiers to identify themselves uniquely.
This is a printable string up to 16 bytes in size."
::= { hpicfGppcAppControlEntry 1 }
hpicfGppcAcAppInstance OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Instance identifier of the application. This is
used to distinguish between different instances of
the same application.
This is a printable string up to 16 bytes in size."
::= { hpicfGppcAppControlEntry 2 }
hpicfGppcAcPolicyName OBJECT-TYPE
SYNTAX HpicfGppcPolicyName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of the policy. Each policy is uniquely
identified by its name. It is possible to apply the
same policy in different manners to different
interfaces and VLANs.
This is a printable string up to 64 characters in
size."
::= { hpicfGppcAppControlEntry 3 }
hpicfGppcAcIngressIfList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "List of interfaces to which this policy applies at
ingress."
::= { hpicfGppcAppControlEntry 4 }
hpicfGppcAcIngressVlanMap1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 0 through 1023.
The first octet corresponds to VLANs with
vlan index values of 0 through 7, the second
octet to VLANs 8 through 15, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 5 }
hpicfGppcAcIngressVlanMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 1024 through 2047.
The first octet corresponds to VLANs with
vlan index values of 1024 through 1031, the second
octet to VLANs 1032 through 1039, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 6 }
hpicfGppcAcIngressVlanMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 2048 through 3071.
The first octet corresponds to VLANs with
vlan index values of 2048 through 2055, the second
octet to VLANs 2056 through 2063, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 7 }
hpicfGppcAcIngressVlanMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 3072 through 4095.
The first octet corresponds to VLANs with
vlan index values of 3072 through 3079, the second
octet to VLANs 3080 through 3087, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 8 }
hpicfGppcAcEgressIfList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "List of interfaces to which this policy applies at
egress."
::= { hpicfGppcAppControlEntry 9 }
hpicfGppcAcEgressVlanMap1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 0 through 1023.
The first octet corresponds to VLANs with
vlan index values of 0 through 7, the second
octet to VLANs 8 through 15, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 10 }
hpicfGppcAcEgressVlanMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 1024 through 2047.
The first octet corresponds to VLANs with
vlan index values of 1024 through 1031, the second
octet to VLANs 1032 through 1039, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 11 }
hpicfGppcAcEgressVlanMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 2048 through 3071.
The first octet corresponds to VLANs with
vlan index values of 2048 through 2055, the second
octet to VLANs 2056 through 2063, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 12 }
hpicfGppcAcEgressVlanMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A string of octets containing one bit per VLAN for
VLANS with vlan index values of 3072 through 4095.
The first octet corresponds to VLANs with
vlan index values of 3072 through 3079, the second
octet to VLANs 3080 through 3087, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'."
::= { hpicfGppcAppControlEntry 13 }
hpicfGppcAcExpPolicy OBJECT-TYPE
SYNTAX INTEGER { permanent(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Expiration policy. This indicates whether a policy
should expire automatically.
'permanent' means a policy should never expire
automatically."
::= { hpicfGppcAppControlEntry 14 }
hpicfGppcAcExpString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..24))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Expiration string. This is used in conjuntion with
hpicfGppcAcExpPolicy to indicate when a policy
should expire automatically.
The value stored in this object is interpreted
differently for different expiration policies. When
the expiration policy is 'permanent', this value is
ignored."
::= { hpicfGppcAppControlEntry 15 }
hpicfGppcAcLastErrorCode OBJECT-TYPE
SYNTAX INTEGER {
no-error(0),
gppc-generic-error(1),
gppc-length-error(2),
gppc-name-error(3),
gppc-parameter-error(4),
gppc-not-implemented(5),
gppc-malloc-error(6),
gppc-too-many-apps(7),
gppc-too-many-policies(8),
gppc-already-reserved(9),
gppc-entry-not-found(10),
gppc-entry-exists(11),
gppc-platform-error(12),
gppc-app-using-policy(13),
gppc-invalid-policy-type(14),
gppc-not-reserved(15),
gppc-no-policy(16),
gppc-policy-not-active(17),
gppc-policy-has-rules(18),
gppc-rule-exists(19),
gppc-mac-mirror-mac-exists(30),
gppc-mac-mirror-dir-both-conflict(31),
gppc-mac-mirror-dir-src-conflict(32),
gppc-mac-mirror-dir-dst-conflict(33),
gppc-mac-mirror-invalid-session(34),
gppc-mac-mirror-invalid-direction(35),
gppc-mac-mirror-no-entry(36),
gppc-mac-mirror-convert-error(37),
gppc-mac-mirror-table-full(38),
gppc-cfg-generic-error(50),
gppc-cfg-entry-not-found(51),
gppc-cfg-set-error(52),
gppc-cfg-get-error(53),
gppc-cfg-no-record(54),
gppc-cfg-add-record-error(55),
gppc-cfg-invalid(56),
gppc-cfg-malloc-error(57)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error code of the last error that occurred. A
non-zero value indicates that the last operation
performed by this instance of the application on the
named policy did not succeed. A detailed
description of the error is available in
hpicfGppcAcLastErrorString."
::= { hpicfGppcAppControlEntry 16 }
hpicfGppcAcLastErrorString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Description of the last error that occurred. This
is a printable ASCII string that describes the error
in some detail."
::= { hpicfGppcAppControlEntry 17 }
hpicfGppcAcRowAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Administrative status of this row. The named policy
in this row is applied to the interfaces and/or
VLANs by this instance of the application only when
the administrative status is enabled. This is the
main on/off switch for the row. The row status must
be active for this switch to have an effect."
::= { hpicfGppcAppControlEntry 18 }
hpicfGppcAcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of this row. Row status must be active, and
the admin status (see hpicfGppcAcRowAdminStatus)
must be enabled for this row to be activated."
::= { hpicfGppcAppControlEntry 19 }
-- ***********************************************
-- GPPC named policy table
-- ***********************************************
hpicfGppcNamedPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfGppcNamedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The named policy table. This table lists the name
and type of all policies that are applied via GPPC."
::= { hpicfGppcMIB 3 }
hpicfGppcNamedPolicyEntry OBJECT-TYPE
SYNTAX HpicfGppcNamedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the named policy table."
INDEX { hpicfGppcNpPolicyName }
::= { hpicfGppcNamedPolicyTable 1 }
HpicfGppcNamedPolicyEntry ::=
SEQUENCE {
hpicfGppcNpPolicyName HpicfGppcPolicyName,
hpicfGppcNpPolicyType INTEGER,
hpicfGppcNpRowStatus RowStatus
}
hpicfGppcNpPolicyName OBJECT-TYPE
SYNTAX HpicfGppcPolicyName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of the policy. The name of a policy is its
unique identification. It is a printable string
in ASCII characters. It can be up to 64 characters
in length"
::= { hpicfGppcNamedPolicyEntry 1 }
hpicfGppcNpPolicyType OBJECT-TYPE
SYNTAX INTEGER { mac-based-mirroring(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Type of the policy. A policy type of
'mac-based-mirroring' indicates that the policy is
used to mirror traffic based on the MAC address of
the source or destination."
::= { hpicfGppcNamedPolicyEntry 2 }
hpicfGppcNpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of this row. The named policy must be
active before rules can be added to it or removed
from it. A newly created policy will remain in
notReady state until it is given a valid policy type
(see hpicfGppcNpPolicyType).
A row in the named policy table can not be deleted
if the named policy is referenced by a row in the
application control table. The application
control entries that refer to this row must be
deleted before this row can be deleted."
::= { hpicfGppcNamedPolicyEntry 3 }
-- ***********************************************
-- GPPC policy rules table
-- ***********************************************
hpicfGppcPolicyRulesTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfGppcPolicyRulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The policy rules table. A policy can consist of
multiple rules. All of the rules of a policy are
listed in this table. Each rule consists of a
string and a numeric identifier - the rule id."
::= { hpicfGppcMIB 4 }
hpicfGppcPolicyRulesEntry OBJECT-TYPE
SYNTAX HpicfGppcPolicyRulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the policy rules table."
INDEX { hpicfGppcNpPolicyName,
hpicfGppcPrRuleId }
::= { hpicfGppcPolicyRulesTable 1 }
HpicfGppcPolicyRulesEntry ::=
SEQUENCE {
hpicfGppcPrRuleId Integer32,
hpicfGppcPrPolicyRule OCTET STRING,
hpicfGppcPrRowStatus RowStatus
}
hpicfGppcPrRuleId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Numeric identifier of the rule. The rules in a
policy are processed sequentially in increasing
order of their rule ids. These numeric ids are
generated by the application that creates the
policy. Rules within a policy have unique rule
ids."
::= { hpicfGppcPolicyRulesEntry 1 }
hpicfGppcPrPolicyRule OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Rule string. This is a string that represents one
rule in the policy. A policy can consist of one or
many rules."
::= { hpicfGppcPolicyRulesEntry 2 }
hpicfGppcPrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of this row. A rule must have an active row
status in order to take effect. Only active rules
within the named policy are applied when an
application applies the policy. It is possible to
use this row status as an on/off switch for enabling
or disabling selected rules within a policy.
A newly created rule will remain in notReady state
until it is given a valid rule string (see
hpicfGppcPrPolicyRule)."
::= { hpicfGppcPolicyRulesEntry 3 }
-- **********************************************************************
-- Conformance Information
-- **********************************************************************
hpicfGppcMIBCompliances OBJECT IDENTIFIER ::= { hpicfGppcConformance 1 }
hpicfGppcMIBGroups OBJECT IDENTIFIER ::= { hpicfGppcConformance 2 }
hpicfGppcMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers
implementing the HP-ICF-GPPC-MIB."
MODULE
MANDATORY-GROUPS { hpicfGppcGroup }
GROUP hpicfGppcGroup
DESCRIPTION "Support for this group is required for HP routers
that implement GPPC."
::= { hpicfGppcMIBCompliances 1 }
hpicfGppcGroup OBJECT-GROUP
OBJECTS {
hpicfGppcAcIngressIfList,
hpicfGppcAcIngressVlanMap1k,
hpicfGppcAcIngressVlanMap2k,
hpicfGppcAcIngressVlanMap3k,
hpicfGppcAcIngressVlanMap4k,
hpicfGppcAcEgressIfList,
hpicfGppcAcEgressVlanMap1k,
hpicfGppcAcEgressVlanMap2k,
hpicfGppcAcEgressVlanMap3k,
hpicfGppcAcEgressVlanMap4k,
hpicfGppcAcExpPolicy,
hpicfGppcAcExpString,
hpicfGppcAcLastErrorCode,
hpicfGppcAcLastErrorString,
hpicfGppcAcRowAdminStatus,
hpicfGppcAcRowStatus,
hpicfGppcNpPolicyType,
hpicfGppcNpRowStatus,
hpicfGppcPrPolicyRule,
hpicfGppcPrRowStatus
}
STATUS current
DESCRIPTION "A collection of HP proprietary objects to support
GPPC."
::= { hpicfGppcMIBGroups 1 }
END