david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/hp/HP-ICF-IPCONFIG

865 lines
32 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
HP-ICF-IPCONFIG DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv4,
InetPortNumber
FROM INET-ADDRESS-MIB
ipNetToPhysicalEntry
FROM IP-MIB
ifIndex
FROM IF-MIB
hpicfCommon
FROM HP-ICF-OID
ipv4InterfaceEntry, ipv6InterfaceEntry, IpAddressOriginTC,
IpAddressStatusTC
FROM IP-MIB
tunnelInetConfigEntry
FROM TUNNEL-MIB;
hpicfIpConfig MODULE-IDENTITY
LAST-UPDATED "200702020000Z" -- JUNE 06,2007
ORGANIZATION "Hewlett Packard Company,
ProCurve Networking Business"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module describes objects for basic
IP address configuration and interface configuration
for devices in the HP Integrated Communication Facility
product line."
REVISION "200702020000Z" -- JUNE 06, 2007
DESCRIPTION "Added hpicfIpv6NDDadAttempts to augment the
hpicfIpv6GlobalConfigObjects."
REVISION "200705300000Z" -- MAY 30, 2007
DESCRIPTION "Added hpicfIpv4InterfaceLocalProxyArp on to the
hpicfIpv4InterfaceEntry."
REVISION "200702020000Z" -- FEBRUARY 02, 2007
DESCRIPTION "Added hpicfIpv6InterfaceTable to augment the
Ipv6InterfaceTable."
REVISION "200612030000Z" -- DECEMBER 03, 2006
DESCRIPTION "Added hpicfUdpTunnelMirrorSessionID to augment the
tunnelInetConfigEntry object in RFC4087."
REVISION "200607070000Z" -- JULY 07, 2006
DESCRIPTION "Added hpicfUdpTunnelSrcPort to augment the
tunnelInetConfigEntry object in RFC4087."
REVISION "200508081600Z" -- August 08, 2005
DESCRIPTION "Initial version."
::= { hpicfCommon 10 }
-- The HP ICF IP configuration group
hpicfIpConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 1}
-- The HP ICF Address group
hpicfIpAddressObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 1}
-- The HP ICF IPV4 interface group
hpicfIpv4InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 2}
-- The HP ICF IPV6 config group
hpicfIpv6ConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 3}
-- The HP ICF IPV6 global config group
hpicfIpv6GlobalConfigObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 1}
hpicfIpv6NDObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 1}
-- The HP ICF IPV6 ICMP group
hpicfIpv6IcmpObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 2}
-- The HP ICF IPV6 interface group
hpicfIpv6InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 2}
hpicfIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains manually configured IPv4 and IPv6
addresses for each interface. An entry in this table
may not exist in the active state unless all objects
in the entry are consistent. In particular, the value of
hpicfIpAddressPrefixLength."
::= { hpicfIpAddressObjects 1 }
hpicfIpAddressEntry OBJECT-TYPE
SYNTAX HpicfIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfIpAddressEntry contains a single
manually configured IP address."
INDEX { ifIndex,
hpicfIpAddressAddrType,
hpicfIpAddressAddr }
::= { hpicfIpAddressTable 1 }
HpicfIpAddressEntry ::=
SEQUENCE {
hpicfIpAddressAddrType InetAddressType,
hpicfIpAddressAddr InetAddress,
hpicfIpAddressPrefixLength InetAddressPrefixLength,
hpicfIpAddressType INTEGER,
hpicfIpAddressRowStatus RowStatus,
hpicfIpAddressExtendedType INTEGER
}
hpicfIpAddressAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Type of IP address"
::= { hpicfIpAddressEntry 1 }
hpicfIpAddressAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address to which this entry's addressing
information pertains.
hpicfIpAddressAddr is always interpreted within the
context of hpicfIpAddressAddrType."
::= { hpicfIpAddressEntry 2 }
hpicfIpAddressPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The prefix length associated with IP address."
::= { hpicfIpAddressEntry 3 }
hpicfIpAddressType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address type. For V4 addresses the value will be
unicast."
DEFVAL { unicast }
::= { hpicfIpAddressEntry 4 }
hpicfIpAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of the IP address entry."
::= { hpicfIpAddressEntry 5 }
hpicfIpAddressExtendedType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
eui64(1),
linkLocal(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address type. For V4 addresses the value will be
none. For V6 address it can be eui64 and linkLocal also."
DEFVAL { none }
::= { hpicfIpAddressEntry 6 }
-- Switch IP Address Table
hpicfSwitchIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfSwitchIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This read only table contains IPV4 and/or IPV6 addresses
for each interface.
These IP Addresses are either manually configured or
obtained by a dynamic meathod (such as DHCP).
This table will hold all manually configured IP Addresses
that exist in hpicfIpAddressTable except for those entries
that are not in active state (hpicfIpAddressRowStatus)."
::= { hpicfIpAddressObjects 2 }
hpicfSwitchIpAddressEntry OBJECT-TYPE
SYNTAX HpicfSwitchIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfSwitchIpAddressEntry contains a single
IP address."
INDEX { ifIndex,
hpicfSwitchIpAddressAddrType,
hpicfSwitchIpAddressAddr }
::= { hpicfSwitchIpAddressTable 1 }
HpicfSwitchIpAddressEntry ::=
SEQUENCE {
hpicfSwitchIpAddressAddrType InetAddressType,
hpicfSwitchIpAddressAddr InetAddress,
hpicfSwitchIpAddressPrefixLength InetAddressPrefixLength,
hpicfSwitchIpAddressType INTEGER,
hpicfSwitchIpAddressOrigin IpAddressOriginTC,
hpicfSwitchIpAddressStatus IpAddressStatusTC,
hpicfSwitchIpAddressPreferredLifetime Unsigned32,
hpicfSwitchIpAddressValidLifetime Unsigned32,
hpicfSwitchIpAddressExtendedType INTEGER
}
hpicfSwitchIpAddressAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Type of IP address."
::= { hpicfSwitchIpAddressEntry 1 }
hpicfSwitchIpAddressAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address to which this entry's addressing
information pertains.
hpicfSwitchIpAddressAddr is always interpreted within the
context of hpicfSwitchIpAddressAddrType."
::= { hpicfSwitchIpAddressEntry 2 }
hpicfSwitchIpAddressPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The prefix length associated with IP address."
::= { hpicfSwitchIpAddressEntry 3 }
hpicfSwitchIpAddressType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address type. For V4 addresses the value will be
unicast."
::= { hpicfSwitchIpAddressEntry 4 }
hpicfSwitchIpAddressOrigin OBJECT-TYPE
SYNTAX IpAddressOriginTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The origin of the address."
::= { hpicfSwitchIpAddressEntry 5 }
hpicfSwitchIpAddressStatus OBJECT-TYPE
SYNTAX IpAddressStatusTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1)."
DEFVAL { preferred }
::= { hpicfSwitchIpAddressEntry 6 }
hpicfSwitchIpAddressPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining length of time in seconds that this address
will continue to be preferred, i.e. time until deprecation.
A value of 4,294,967,295 represents infinity.
The address generated from a deprecated address should no
longer be used as a source address in new communications,
but packets received on such an interface are processed as
expected.
The default for IPv4 addresses is 4,294,967,295 (infinity)."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462"
::= { hpicfSwitchIpAddressEntry 7 }
hpicfSwitchIpAddressValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining length of time, in seconds, that this address
will continue to be valid, i.e. time until invalidation. A
value of 4,294,967,295 represents infinity.
The address generated from an invalidated address should not
appear as the destination or source address of a packet.
The default for IPv4 addresses is 4,294,967,295 (infinity)."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462"
::= { hpicfSwitchIpAddressEntry 8 }
hpicfSwitchIpAddressExtendedType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
eui64(1),
linkLocal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address type. For V4 addresses the value will be
none. For V6 address it can be eui64 and linkLocal also."
DEFVAL { none }
::= { hpicfSwitchIpAddressEntry 9 }
hpicfIpNetToPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpNetToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments ipNeTtoPhysicalTable"
::= {hpicfIpAddressObjects 3 }
hpicfIpNetToPhysicalEntry OBJECT-TYPE
SYNTAX HpicfIpNetToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table augments ipNeTtoPhysicalTable"
AUGMENTS { ipNetToPhysicalEntry }
::= { hpicfIpNetToPhysicalTable 1 }
HpicfIpNetToPhysicalEntry ::=
SEQUENCE {
hpicfIpNetToPhysicalPort Integer32
}
hpicfIpNetToPhysicalPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object gives the port through which the
physical address was learnt"
::= { hpicfIpNetToPhysicalEntry 1}
-- V4 Interface Table
hpicfIpv4InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpv4InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains per-interface IPV4 configuration
information."
::= { hpicfIpv4InterfaceObjects 1 }
hpicfIpv4InterfaceEntry OBJECT-TYPE
SYNTAX HpicfIpv4InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfIpv4InterfaceEntry contains IPV4
interface specific configuration information. This table
is indexed by ipv4InterfaceIfIndex."
AUGMENTS { ipv4InterfaceEntry }
::= { hpicfIpv4InterfaceTable 1 }
HpicfIpv4InterfaceEntry ::=
SEQUENCE {
hpicfIpv4InterfaceDhcpEnable INTEGER,
hpicfIpv4InterfaceForwarding INTEGER,
hpicfIpv4InterfaceProxyArp INTEGER,
hpicfIpv4InterfaceLocalProxyArp INTEGER,
hpicfIpv4InterfaceBootpGateway InetAddressIPv4
}
hpicfIpv4InterfaceDhcpEnable OBJECT-TYPE
SYNTAX INTEGER {
full(1),
off(2),
inform(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Changing this flag to 'full' will clear any existing
IP address configuration for this interface and
will cause the device to use a dynamic method
(e.g. DHCP) to obtain its IP configuration and
other configuration parameter (such as gateway,
time of day, etc...) for this interface.
Setting this flag to 'inform' will allow manual IP
address configuration and yet permit other configuration
parameters (such as gateway, time of day, etc...) to
be obtained from a DHCP server.
Setting this flag to 'off' will allow manual IP
configuration but disallow any DHCP configuration."
DEFVAL { full }
::= { hpicfIpv4InterfaceEntry 1 }
hpicfIpv4InterfaceForwarding OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicates whether this interface is forwarding
the datagrams that were not addressed to this interface.
Setting this flag to 'enabled' (the default) results
in forwarding the datagrams that were not addressed to
this interface.
Setting this flag to 'disabled' results in ignoring
datagrams that were not addressed to this entity."
DEFVAL { enabled }
::= { hpicfIpv4InterfaceEntry 2 }
hpicfIpv4InterfaceProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables ARP proxy on the interface. If set
to 'enabled', the switch will respond on ARP request
for IP addresses from other subnets.
If set to disabled (the default), the switch will not
respond on ARP request for IP addresses from other
subnets."
DEFVAL { disabled }
::= { hpicfIpv4InterfaceEntry 3 }
hpicfIpv4InterfaceLocalProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables local ARP proxy on the interface. If set
to 'enabled', the switch will respond on ARP request
for IP addresses within the local subnet.
If set to disabled (the default), the switch will not
respond on ARP request for IP addresses within the
local subnet."
DEFVAL { disabled }
::= { hpicfIpv4InterfaceEntry 4 }
hpicfIpv4InterfaceBootpGateway OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This entry will contain the IP address of the
BOOTP gateway for the interface."
::= { hpicfIpv4InterfaceEntry 5 }
-- V6 Global Objects
hpicfIpv6NDDadAttempts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value in this object indicates the maximum number of
neighbour solicitation requests that will be sent while
performing duplicate address detection."
::= { hpicfIpv6NDObjects 1 }
-- V6 Global Icmp Objects
hpicfIpv6IcmpErrorInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value in this object indicates the error interval
in which the token bucket algorithm places one token
in the bucket for ICMPV6 rate limiting.Each token
represents the right to send one ICMP error message.
Each time an error is sent, it takes a token from the bucket.
ICMP will not be allowed to originate an error
message if the bucket is empty."
::= { hpicfIpv6IcmpObjects 1 }
hpicfIpv6IcmpBucketsize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value in this object indicates the maximum number of
tokens that can be in the bucket."
::= { hpicfIpv6IcmpObjects 2 }
-- V6 Interface Table
hpicfIpv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains per-interface IPV6 configuration
information."
::= { hpicfIpv6InterfaceObjects 1 }
hpicfIpv6InterfaceEntry OBJECT-TYPE
SYNTAX HpicfIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfIpv6InterfaceEntry contains IPV6
interface specific configuration information. This table
is indexed by ipv6InterfaceIfIndex."
AUGMENTS { ipv6InterfaceEntry }
::= { hpicfIpv6InterfaceTable 1 }
HpicfIpv6InterfaceEntry ::=
SEQUENCE {
hpicfIpv6InterfaceDhcpMode INTEGER,
hpicfIpv6InterfaceManual INTEGER,
hpicfIpv6InterfaceAutoConfig INTEGER,
hpicfIpv6InterfaceDhcpRapidCommit INTEGER,
hpicfIpv6InterfaceDhcpRelay INTEGER,
hpicfIpv6InterfaceCfgEnableStatus INTEGER
}
hpicfIpv6InterfaceDhcpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
dhcpFull(1),
dhcpInform(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this flag to 'dhcpFull' will clear any existing
IP address configuration for this interface and
will cause the device to use a dynamic method
(e.g. DHCP) to obtain its IP configuration and
other configuration parameter (such as gateway,
time of day, etc...) for this interface.
Setting this flag to 'dhcpInform' will allow manual IP
address configuration and yet permit other configuration
parameters (such as gateway, time of day, etc...) to
be obtained from a DHCP server.
Setting this flag to 'disabled' will not allow any of the
above mentioned two configuration, but interface can
have link-local, auto-config and manual ip-address."
DEFVAL { disabled }
::= { hpicfIpv6InterfaceEntry 1 }
hpicfIpv6InterfaceManual OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this flag to 'enabled' will allow manual IP
address configuration but disallow any DHCP configuration."
DEFVAL { disabled }
::= { hpicfIpv6InterfaceEntry 2 }
hpicfIpv6InterfaceAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this flag to 'enabled' will allow host to
configure automatically from default router.
There may be multiple routers and in that scenario switch will
add the addresses from all these routers"
DEFVAL { disabled }
::= { hpicfIpv6InterfaceEntry 3 }
hpicfIpv6InterfaceDhcpRapidCommit OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this flag to 'enabled' will allow the host to get
address and configuration information from the dhcp server
rapidly. This flag can be enabled only if the
hpicfIpv6InterfaceDhcpMode object is set as dhcpFull.
By default this flag is set to disabled."
DEFVAL { disabled }
::= { hpicfIpv6InterfaceEntry 4 }
hpicfIpv6InterfaceDhcpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicates whether this interface is dhcp-relay
enabled. By default this flag is set to disabled."
DEFVAL { enabled }
::= { hpicfIpv6InterfaceEntry 5 }
hpicfIpv6InterfaceCfgEnableStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The indication of whether IPv6 is enabled (up) or disabled
(down) on this interface.
Setting this object to up(1) will enable ipv6 for the given
interface.Setting this object to down(2) will disable the ipv6
for the interface only if hpicfIpv6InterfaceDhcpMode,
hpicfIpv6InterfaceManual and hpicfIpv6InterfaceAutoConfig are
disabled.A get on this object reflects the data saved in a
non-volatile storage.
Note:To get the current ipv6 status for an interface refer to
ipv6InterfaceEnableStatus."
::= { hpicfIpv6InterfaceEntry 6 }
-- **********************************************************************
-- Remote mirroring tunnel Objects
-- **********************************************************************
hpicfUdpTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfUdpTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains per interface IPV4
Udp encapsulated tunnel specific configuration
information."
::= { hpicfIpv4InterfaceObjects 3 }
hpicfUdpTunnelEntry OBJECT-TYPE
SYNTAX HpicfUdpTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfUdpTunnelEntry contains
Udp encapsulated tunnel specific configuration
information."
AUGMENTS { tunnelInetConfigEntry }
::= { hpicfUdpTunnelTable 1 }
HpicfUdpTunnelEntry ::=
SEQUENCE {
hpicfUdpTunnelSrcPort InetPortNumber,
hpicfUdpTunnelMirrorSessionID Integer32
}
hpicfUdpTunnelSrcPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This variable is valid only for the remote
mirroring source or destination switch.
The value will be ignored otherwise. A
value of 0 means that the UDP port
is irrelevant for the tunnel type. If this
value is non-zero it must be duplicated
in the tunnelInetConfigID value (this
will ensure that a given UDP port can
only be associated once with a given
tunnelInetConfigAddressType,
tunnelInetConfigLocalAddress,
tunnelInetConfigRemoteAddress,
tunnelInetConfigEncapsMethod combination)."
DEFVAL { 0 }
::= { hpicfUdpTunnelEntry 1 }
hpicfUdpTunnelMirrorSessionID OBJECT-TYPE
SYNTAX Integer32(0..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This variable is valid only for a remote
mirroring switch which interfaces with the
source end of the tunnel.
The value will be ignored otherwise. A
value of 0 means that the mirror session ID
is irrelevant for the tunnel type. "
DEFVAL { 0 }
::= { hpicfUdpTunnelEntry 2 }
-- **********************************************************************
-- Conformance information
-- **********************************************************************
hpicfIpConfigConformance OBJECT IDENTIFIER ::= {hpicfIpConfig 2}
hpicfIpConfigCompliances OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 1}
hpicfIpConfigGroups OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 2}
-- **********************************************************************
-- Compliance statements
-- **********************************************************************
hpicfIpConfigCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "
A compliance statement for HP Routing switches with IP
Configuration"
MODULE
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
hpicfIpv4InterfaceTableGroup,
hpicfSwitchIpAddressTableGroup }
OBJECT hpicfIpv4InterfaceDhcpEnable
MIN-ACCESS read-write
DESCRIPTION "An agent is not required to implement inform (3)
state."
::= { hpicfIpConfigCompliances 1 }
hpicfIpConfigCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "
A compliance statement for HP Routing switches with IP
Configuration"
MODULE
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
hpicfIpv4InterfaceTableGroup,
hpicfSwitchIpAddressTableGroup }
GROUP hpicfUdpTunnelTableGroup
DESCRIPTION "This group is valid only for the remote
mirroring source or destination switch.
The value will be ignored otherwise."
OBJECT hpicfIpv4InterfaceDhcpEnable
MIN-ACCESS read-write
DESCRIPTION "An agent is not required to implement inform (3)
state."
::= { hpicfIpConfigCompliances 2 }
hpicfIpConfigCompliance4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "
A compliance statement for HP Routing switches with IP
Configuration"
MODULE
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
hpicfIpv4InterfaceTableGroup2,
hpicfSwitchIpAddressTableGroup,
hpicfIpv6InterfaceTableGroup }
GROUP hpicfUdpTunnelTableGroup
DESCRIPTION "This group is valid only for the remote
mirroring source or destination switch.
The value will be ignored otherwise."
OBJECT hpicfIpv4InterfaceDhcpEnable
MIN-ACCESS read-write
DESCRIPTION "An agent is not required to implement inform (3)
state."
::= { hpicfIpConfigCompliances 4 }
hpicfIpAddressTableGroup OBJECT-GROUP
OBJECTS {
hpicfIpAddressPrefixLength,
hpicfIpAddressType,
hpicfIpAddressRowStatus,
hpicfIpAddressExtendedType }
STATUS current
DESCRIPTION "A Collection of objects allowing configuration of
an IP address for an interface."
::= { hpicfIpConfigGroups 1 }
hpicfSwitchIpAddressTableGroup OBJECT-GROUP
OBJECTS {
hpicfSwitchIpAddressAddrType,
hpicfSwitchIpAddressAddr}
STATUS current
DESCRIPTION "A Collection of objects providing interfaces addressing
information."
::= { hpicfIpConfigGroups 2 }
hpicfIpv4InterfaceTableGroup OBJECT-GROUP
OBJECTS {
hpicfIpv4InterfaceDhcpEnable,
hpicfIpv4InterfaceForwarding,
hpicfIpv4InterfaceProxyArp }
STATUS deprecated
DESCRIPTION "Deprecated - see hpicfIpv4InterfaceTableGroup2"
::= { hpicfIpConfigGroups 3 }
hpicfUdpTunnelTableGroup OBJECT-GROUP
OBJECTS {
hpicfUdpTunnelSrcPort,
hpicfUdpTunnelMirrorSessionID }
STATUS current
DESCRIPTION "A Collection of objects that allows IPV4 interface
configuration for remote mirroring"
::= { hpicfIpConfigGroups 4 }
hpicfIpv6InterfaceTableGroup OBJECT-GROUP
OBJECTS {
hpicfIpv6InterfaceDhcpMode,
hpicfIpv6InterfaceManual,
hpicfIpv6InterfaceAutoConfig,
hpicfIpv6InterfaceDhcpRapidCommit,
hpicfIpv6InterfaceDhcpRelay }
STATUS current
DESCRIPTION "A Collection of objects that allows IPV6 interface
configuration"
::= { hpicfIpConfigGroups 5 }
hpicfIpv4InterfaceTableGroup2 OBJECT-GROUP
OBJECTS {
hpicfIpv4InterfaceDhcpEnable,
hpicfIpv4InterfaceForwarding,
hpicfIpv4InterfaceProxyArp,
hpicfIpv4InterfaceLocalProxyArp }
STATUS current
DESCRIPTION "A Collection of objects that allows IPV4 interface
configuration"
::= { hpicfIpConfigGroups 6 }
END
Reference in New Issue Copy Permalink