mibs/MIBS/hp/HP-SN-IP-ACL-MIB

527 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
HP-SN-IP-ACL-MIB DEFINITIONS ::= BEGIN
-- Imports
IMPORTS
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
Counter64
FROM SNMPv2-SMI
snIp
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::= OCTET STRING
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Row Status
SnRowStatus ::= INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
-- Action
Action ::= INTEGER { deny(0), permit(1) }
-- Boolean Values
TruthVal ::= INTEGER { false (0), true (1) }
-- ACL number
AclNumber ::= INTEGER (1..199)
-- Operator
Operator ::= INTEGER { eq(0), neq(1), lt(2), gt(3), range(4), undefined(7) }
-- IP Protocol
IpProtocol ::= INTEGER (0..255)
-- Precedence Value
PrecedenceValue ::= INTEGER { critical(5), flash(3), flashoverride(4),
immediate(2), internet(6), network(7),
priority(1), routine(0), undefined(8) }
-- Tos Value
TosValue ::= INTEGER {
normal(0),
minMonetaryCost(1),
maxReliability(2),
tosValue3(3),
maxThroughput(4),
tosValue5(5),
tosValue6(6),
tosValue7(7),
minDelay(8),
tosValue9(9),
tosValue10(10),
tosValue11(11),
tosValue12(12),
tosValue13(13),
tosValue14(14),
tosValue15(15),
undefined(16)
}
-- Direction
Direction ::= INTEGER { inbound(0), outbound(1) }
------Access Control List
snAgAcl OBJECT IDENTIFIER ::= { snIp 15 }
snAgAclGlobal OBJECT IDENTIFIER ::= { snAgAcl 1 }
snAgAclGblCurRowIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current row index of the ACL table entry."
::= { snAgAclGlobal 1 }
--
-- ACL Table
--
snAgAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Access Control List"
::= { snAgAcl 2 }
snAgAclEntry OBJECT-TYPE
SYNTAX SnAgAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP access control list table."
INDEX { snAgAclIndex }
::= { snAgAclTable 1 }
SnAgAclEntry ::= SEQUENCE {
snAgAclIndex
INTEGER,
snAgAclNumber
AclNumber,
snAgAclName
DisplayString,
snAgAclAction
Action,
snAgAclProtocol
IpProtocol,
snAgAclSourceIp
IpAddress,
snAgAclSourceMask
IpAddress,
snAgAclSourceOperator
Operator,
snAgAclSourceOperand1
INTEGER,
snAgAclSourceOperand2
INTEGER,
snAgAclDestinationIp
IpAddress,
snAgAclDestinationMask
IpAddress,
snAgAclDestinationOperator
Operator,
snAgAclDestinationOperand1
INTEGER,
snAgAclDestinationOperand2
INTEGER,
snAgAclPrecedence
PrecedenceValue,
snAgAclTos
TosValue,
snAgAclEstablished
RtrStatus,
snAgAclLogOption
TruthVal,
snAgAclStandardFlag
TruthVal,
snAgAclRowStatus
SnRowStatus,
snAgAclFlowCounter
Counter64,
snAgAclPacketCounter
Counter64,
snAgAclComments
DisplayString,
snAgAclIpPriority
INTEGER,
snAgAclPriorityForce
INTEGER,
snAgAclPriorityMapping
INTEGER,
snAgAclDscpMarking
INTEGER,
snAgAclDscpMapping
INTEGER
}
snAgAclIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access control list item number for an entry.
This is a unique number that identifies different
Access list entries combined with the access list
name and access list number. This one has to be
unique even though the name and number are not unique
for a give access list with same or different source
address, subnet mask, destination address and destination
mask, protocol type, action (permit/deny) type and the
operator (neq, eq, gt and , lt) which makes the index a
unique tuple (name, number, itemnumber)."
::= { snAgAclEntry 1 }
snAgAclNumber OBJECT-TYPE
SYNTAX AclNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The access control list number for an entry.
The standard access list is in the range <1..99>.
The extended access list is in the range <100-199>."
::= { snAgAclEntry 2 }
snAgAclName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ACL name for an entry."
::= { snAgAclEntry 3 }
snAgAclAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip packet matches
with this access control list."
::= { snAgAclEntry 4 }
snAgAclProtocol OBJECT-TYPE
SYNTAX IpProtocol
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transport protocol. 0 means any protocol."
::= { snAgAclEntry 5 }
snAgAclSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address."
::= { snAgAclEntry 6 }
snAgAclSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP subnet mask."
::= { snAgAclEntry 7 }
snAgAclSourceOperator OBJECT-TYPE
SYNTAX Operator
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 8 }
snAgAclSourceOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 9 }
snAgAclSourceOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 10 }
snAgAclDestinationIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address."
::= { snAgAclEntry 11 }
snAgAclDestinationMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP subnet mask."
::= { snAgAclEntry 12 }
snAgAclDestinationOperator OBJECT-TYPE
SYNTAX Operator
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 13 }
snAgAclDestinationOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 14 }
snAgAclDestinationOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 15 }
snAgAclPrecedence OBJECT-TYPE
SYNTAX PrecedenceValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This refers to IP precedence value in the range <0-7>
critical(5),
flash(3),
flash-override(4),
immediate(2),
internet(6),
network(7),
priority(1),
routine(0)"
::= { snAgAclEntry 16 }
snAgAclTos OBJECT-TYPE
SYNTAX TosValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This refers to the IP type of service value in range
<0-15> which is the sum of numeric vlaues of the
following options -
match packets with maximum reliability TOS (2)
match packets with maximum throughput TOS (4)
match packets with minimum delay (8)
match packets with minimum monetary cost TOS (1)
match packets with normal TOS (0)"
::= { snAgAclEntry 17 }
snAgAclEstablished OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol."
::= { snAgAclEntry 18 }
snAgAclLogOption OBJECT-TYPE
SYNTAX TruthVal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log flag"
::= { snAgAclEntry 19 }
snAgAclStandardFlag OBJECT-TYPE
SYNTAX TruthVal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Return whether the ACL is standard or extended, 1 for standard ACL"
::= { snAgAclEntry 20 }
snAgAclRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a access list
entry."
::= { snAgAclEntry 21 }
snAgAclFlowCounter OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Approximate count of flows matching individual ACL entry."
::= { snAgAclEntry 22 }
snAgAclPacketCounter OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Accurate count of packets matching individual ACL entry."
::= { snAgAclEntry 23 }
snAgAclComments OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remark description of individual ACL entry."
::= { snAgAclEntry 24 }
snAgAclIpPriority OBJECT-TYPE
SYNTAX INTEGER(0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"QoS priority option for IP ACL entry."
::= { snAgAclEntry 25 }
snAgAclPriorityForce OBJECT-TYPE
SYNTAX INTEGER(0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force packet outgoing priority. Not defined(4)"
::= { snAgAclEntry 26 }
snAgAclPriorityMapping OBJECT-TYPE
SYNTAX INTEGER(0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Map incoming packet priority. Not defined(8)"
::= { snAgAclEntry 27 }
snAgAclDscpMarking OBJECT-TYPE
SYNTAX INTEGER(0..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mark packets with given DSCP value. Not defined(64)"
::= { snAgAclEntry 28 }
snAgAclDscpMapping OBJECT-TYPE
SYNTAX INTEGER(0..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Map incoming DSCP value. Not defined(64)"
::= { snAgAclEntry 29 }
--
-- Acl Port Table
snAgAclBindToPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclBindToPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of ACL binding to port for router"
::= { snAgAcl 3 }
snAgAclBindToPortEntry OBJECT-TYPE
SYNTAX SnAgAclBindToPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ACL-binding-to-port table."
INDEX {
snAgAclPortNum,
snAgAclPortBindDirection
}
::= { snAgAclBindToPortTable 1 }
SnAgAclBindToPortEntry ::= SEQUENCE {
snAgAclPortNum
INTEGER,
snAgAclPortBindDirection
Direction,
snAgAclNum
INTEGER,
snAgAclNameString
DisplayString,
snAgBindPortListInVirtualInterface
OCTET STRING,
snAgAclPortRowStatus
SnRowStatus
}
snAgAclPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Binding-to port num, either physical port or virtual interface."
::= { snAgAclBindToPortEntry 1 }
snAgAclPortBindDirection OBJECT-TYPE
SYNTAX Direction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ACL port direction, inbound or outbound"
::= { snAgAclBindToPortEntry 2 }
snAgAclNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defined ACL number"
::= { snAgAclBindToPortEntry 3 }
snAgAclNameString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defined ACL name"
::= { snAgAclBindToPortEntry 4 }
snAgBindPortListInVirtualInterface OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port list for binding virtual interface"
::= { snAgAclBindToPortEntry 5 }
snAgAclPortRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a ACL port entry."
::= { snAgAclBindToPortEntry 6 }
END