mibs/MIBS/hpmsm/COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB.my

368 lines
15 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ****************************************************************************
-- COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB definitions
--
-- Copyright (c) 2004, Colubris Networks, Inc.
-- All Rights Reserved.
--
-- Colubris Networks Public Access Retention MIB file.
--
-- ****************************************************************************
COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Integer32, Unsigned32, Counter32, Counter64
FROM SNMPv2-SMI
DateAndTime
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
colubrisMgmtV2
FROM COLUBRIS-SMI
ColubrisSSIDOrNone
FROM COLUBRIS-TC
;
colubrisPublicAccessRetentionMIB MODULE-IDENTITY
LAST-UPDATED "200410280000Z"
ORGANIZATION "Colubris Networks, Inc."
CONTACT-INFO "Colubris Networks
Postal: 200 West Street Ste 300
Waltham, Massachusetts 02451-1121
UNITED STATES
Phone: +1 781 684 0001
Fax: +1 781 684 0009
E-mail: cn-snmp@colubris.com"
DESCRIPTION "Colubris Networks Public Access MIB."
::= { colubrisMgmtV2 15 }
-- colubrisPublicAccessRetentionMIB definition
colubrisPublicAccessRetentionMIBObjects OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIB 1 }
-- public access retention groups
publicAccessRetentionSessionsGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIBObjects 1 }
publicAccessRetentionPeriodicStatsGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIBObjects 2 }
-- Public Access Retention Sessions Group
publicAccessRetentionSessionsMaxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of entries inside the publicAccessRetentionSessionTable.
The maximum value for this is 250% the maximum number of users configured inside the product."
DEFVAL { 0 }
::= { publicAccessRetentionSessionsGroup 1 }
publicAccessRetentionSessionsMaxTime OBJECT-TYPE
SYNTAX Integer32 (300..1200)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of seconds for an entry to remain in the table. When expired the
session's state changes to Unassigned."
DEFVAL { 300 }
::= { publicAccessRetentionSessionsGroup 2 }
-- public access retention user table
publicAccessRetentionSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF PublicAccessRetentionSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing information about existing or past authenticated
user sessions."
::= { publicAccessRetentionSessionsGroup 3 }
publicAccessRetentionSessionEntry OBJECT-TYPE
SYNTAX PublicAccessRetentionSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a particular authenticated user session.
publicAccessRetentionSessionIndex - Uniquely identifies a session in the
table."
INDEX { publicAccessRetentionSessionIndex }
::= { publicAccessRetentionSessionTable 1 }
PublicAccessRetentionSessionEntry ::= SEQUENCE
{
publicAccessRetentionSessionIndex Integer32,
publicAccessRetentionSessionState INTEGER,
publicAccessRetentionSessionUserName OCTET STRING,
publicAccessRetentionSessionStartTime DateAndTime,
publicAccessRetentionSessionDuration Counter32,
publicAccessRetentionSessionStationIpAddress IpAddress,
publicAccessRetentionSessionPacketsSent Counter32,
publicAccessRetentionSessionPacketsReceived Counter32,
publicAccessRetentionSessionBytesSent Counter64,
publicAccessRetentionSessionBytesReceived Counter64,
publicAccessRetentionSessionSSID ColubrisSSIDOrNone
}
publicAccessRetentionSessionIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of a session in the publicAccessRetentionSessionTable."
::= { publicAccessRetentionSessionEntry 1 }
publicAccessRetentionSessionState OBJECT-TYPE
SYNTAX INTEGER
{
unassigned(0),
connected(2),
reconnecting(3),
disconnecting(4),
disconnected(5),
disconnectingAdministrative(6),
disconnectedAdministrative(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the current state of the user's session."
::= { publicAccessRetentionSessionEntry 2 }
publicAccessRetentionSessionUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..253))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the last user's name used for RADIUS authentication."
::= { publicAccessRetentionSessionEntry 3 }
publicAccessRetentionSessionStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates when this user session was started."
::= { publicAccessRetentionSessionEntry 4 }
publicAccessRetentionSessionDuration OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates how long the user's session has been active.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessRetentionSessionEntry 5 }
publicAccessRetentionSessionStationIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's IP address."
::= { publicAccessRetentionSessionEntry 6 }
publicAccessRetentionSessionPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of IP packets sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessRetentionSessionEntry 7 }
publicAccessRetentionSessionPacketsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of IP packets received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessRetentionSessionEntry 8 }
publicAccessRetentionSessionBytesSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessRetentionSessionEntry 9 }
publicAccessRetentionSessionBytesReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessRetentionSessionEntry 10 }
publicAccessRetentionSessionSSID OBJECT-TYPE
SYNTAX ColubrisSSIDOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's Access Point SSID (ONLY when
Location-aware is enabled and properly configured).
If this information is not available, a zero-length
string will be returned."
::= { publicAccessRetentionSessionEntry 11 }
-- Public Access Retention Periodic Stats Group
publicAccessRetentionPeriodicStatsMaxCount OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the maximum number of periods to keep inside the table."
DEFVAL { 0 }
::= { publicAccessRetentionPeriodicStatsGroup 1 }
publicAccessRetentionPeriodicStatsDuration OBJECT-TYPE
SYNTAX Integer32 (300..1200)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the amount of time for a period of an entry inside the table.
Changing the value will erase the table contents."
DEFVAL { 300 }
::= { publicAccessRetentionPeriodicStatsGroup 2 }
-- public access retention authentication table
publicAccessRetentionPeriodTable OBJECT-TYPE
SYNTAX SEQUENCE OF PublicAccessRetentionPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing statistics information about number of
authentication user's sessions pending and terminated."
::= { publicAccessRetentionPeriodicStatsGroup 3 }
publicAccessRetentionPeriodEntry OBJECT-TYPE
SYNTAX PublicAccessRetentionPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics information about the number of authenticated user sessions
in a given period of time."
INDEX { publicAccessRetentionPeriodIndex }
::= { publicAccessRetentionPeriodTable 1 }
PublicAccessRetentionPeriodEntry ::= SEQUENCE
{
publicAccessRetentionPeriodIndex Integer32,
publicAccessRetentionPeriodStartTime DateAndTime,
publicAccessRetentionPeriodStopTime DateAndTime,
publicAccessRetentionPeriodHighestSessionCount Counter32,
publicAccessRetentionPeriodTotalSessionCount Counter32
}
publicAccessRetentionPeriodIndex OBJECT-TYPE
SYNTAX Integer32 (1..9999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of a statistics period."
::= { publicAccessRetentionPeriodEntry 1 }
publicAccessRetentionPeriodStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the start time for the statistical period.
If zero, then the period doesn't contains valid information."
::= { publicAccessRetentionPeriodEntry 2 }
publicAccessRetentionPeriodStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the stop time for the statistical period.
If zero, the period is not terminated yet."
::= { publicAccessRetentionPeriodEntry 3 }
publicAccessRetentionPeriodHighestSessionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the highest number of simultaneous authenticated user sessions within
this time period."
::= { publicAccessRetentionPeriodEntry 4 }
publicAccessRetentionPeriodTotalSessionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of authenticated user's session within this time period."
::= { publicAccessRetentionPeriodEntry 5 }
-- public access retention notifications
publicAccessRetentionMIBNotificationPrefix OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIB 2 }
publicAccessRetentionMIBNotifications OBJECT IDENTIFIER ::= { publicAccessRetentionMIBNotificationPrefix 0 }
publicAccessRetentionSessionMaxCountReachedTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessRetentionSessionsMaxCount,
publicAccessRetentionSessionsMaxTime
}
STATUS current
DESCRIPTION "This notification is sent whenever the number of session exceed the
value of publicAccessRetentionSessionsMaxCount."
::= { publicAccessRetentionMIBNotifications 1 }
-- conformance information
colubrisPublicAccessRetentionMIBConformance OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIB 3 }
colubrisPublicAccessRetentionMIBCompliances OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIBConformance 1 }
colubrisPublicAccessRetentionMIBGroups OBJECT IDENTIFIER ::= { colubrisPublicAccessRetentionMIBConformance 2 }
-- compliance statements
colubrisPublicAccessRetentionMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for entities which implement
the Colubris Public Access Retention MIB."
MODULE MANDATORY-GROUPS
{
colubrisPublicAccessRetentionSessionsMIBGroup,
colubrisPublicAccessRetentionPeriodicStatsMIBGroup,
colubrisPublicAccessRetentionNotificationGroup
}
::= { colubrisPublicAccessRetentionMIBCompliances 1 }
-- units of conformance
colubrisPublicAccessRetentionSessionsMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessRetentionSessionsMaxCount,
publicAccessRetentionSessionsMaxTime,
publicAccessRetentionSessionState,
publicAccessRetentionSessionUserName,
publicAccessRetentionSessionStartTime,
publicAccessRetentionSessionDuration,
publicAccessRetentionSessionStationIpAddress,
publicAccessRetentionSessionPacketsSent,
publicAccessRetentionSessionPacketsReceived,
publicAccessRetentionSessionBytesSent,
publicAccessRetentionSessionBytesReceived,
publicAccessRetentionSessionSSID
}
STATUS current
DESCRIPTION "A collection of objects providing the Public Access Retention Sessions MIB
capability."
::= { colubrisPublicAccessRetentionMIBGroups 1 }
-- units of conformance
colubrisPublicAccessRetentionPeriodicStatsMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessRetentionPeriodicStatsDuration,
publicAccessRetentionPeriodicStatsMaxCount,
publicAccessRetentionPeriodStartTime,
publicAccessRetentionPeriodStopTime,
publicAccessRetentionPeriodHighestSessionCount,
publicAccessRetentionPeriodTotalSessionCount
}
STATUS current
DESCRIPTION "A collection of objects providing the Public Access Retention PeriodicStats MIB
capability."
::= { colubrisPublicAccessRetentionMIBGroups 2 }
-- units of conformance
colubrisPublicAccessRetentionNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
publicAccessRetentionSessionMaxCountReachedTrap
}
STATUS current
DESCRIPTION "A collection of supported notifications."
::= { colubrisPublicAccessRetentionMIBGroups 3 }
END