mibs/MIBS/huawei/HUAWEI-E-TRUNK-MIB

894 lines
30 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- =================================================================
-- Copyright (C) 2015 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description: The HUAWEI-E-TRUNK-MIB.mib provides information about E-Trunk
-- Reference:
-- Version: V2.06
-- History:
-- liwei, 2015-7-30.
-- 1. Add E-Trunk expected state trap.
-- Version: V2.05
-- History:
-- wangguojin, 2014-10-29.
-- 1. Add E-Trunk member reason for evpn.
-- Version: V2.04
-- History:
-- mengfanlu, 2014-05-21.
-- 1. Add backup port table.
-- Version: V2.02
-- History:
-- caoli, 2014-05-04.
-- 1, Add five new nodes based on V2.01 for E-Trunk auto BFD
-- hwETrunkAutoBFDEnable, hwETrunkAutoBFDTrackIfIndex,
-- hwETrunkAutoBFDTxInterval, hwETrunkAutoBFDRxInterval,
-- hwETrunkAutoBFDDetectMultiplier.
-- Version: V1.0
-- History:
-- zhenghebin,2008.11.25,publish
-- =================================================================
HUAWEI-E-TRUNK-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiMgmt
FROM HUAWEI-MIB
IpAddress,Integer32, Unsigned32, Counter32, Counter64,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
PhysAddress,DisplayString,TruthValue,TimeStamp,RowStatus,TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF;
hwETrunkMIB MODULE-IDENTITY
LAST-UPDATED "201507221448Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"Add hwETrunkExpectStateChange and hwETrunkExpectStateResume."
REVISION "201507221448Z"
DESCRIPTION
"The HUAWEI-E-TRUNK-MIB.mib provides information about E-Trunk."
REVISION "201410291522Z"
DESCRIPTION
"Add E-Trunk member reason for evpn."
REVISION "201406302146Z"
DESCRIPTION
"Add trill active-active reason."
REVISION "201405210941Z"
DESCRIPTION
"Add backup port table."
REVISION "201405071057Z"
DESCRIPTION
"Add five new nodes based on V2.01 for E-Trunk auto BFD."
REVISION "201312021153Z"
DESCRIPTION
"The specification of E-Trunk number expanded from 64 to 128."
REVISION "200810211010Z"
DESCRIPTION
"Initial version."
::= { hwDatacomm 178 }
--
-- Node definitions
--
hwDatacomm OBJECT IDENTIFIER ::= { huaweiMgmt 25 }
hwETrunkObjects OBJECT IDENTIFIER ::= { hwETrunkMIB 1 }
-- E-Trunk
hwETrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwETrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The E-Trunk table."
::= { hwETrunkObjects 1 }
hwETrunkEntry OBJECT-TYPE
SYNTAX HwETrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"E-Trunk entry."
INDEX { hwETrunkId }
::= { hwETrunkTable 1 }
HwETrunkEntry ::=
SEQUENCE {
hwETrunkId
Integer32,
hwETrunkSystemId
PhysAddress,
hwETrunkPri
Integer32,
hwETrunkStatus
INTEGER,
hwETrunkStatusReason
INTEGER,
hwETrunkPeerIpAddr
IpAddress,
hwETrunkSourceIpAddr
IpAddress,
hwETrunkReceiveFailTimeMultiple
Integer32,
hwETrunkSendPeriod
Integer32,
hwETrunkPacketReceive
Counter64,
hwETrunkPacketSend
Counter64,
hwETrunkPacketRecDrop
Counter64,
hwETrunkPacketSndDrop
Counter64,
hwETrunkPeerSystemId
PhysAddress,
hwETrunkPeerPri
Integer32,
hwETrunkPeerReceiveFailTime
Integer32,
hwETrunkSecurityKeyType
INTEGER,
hwETrunkSecurityKey
OCTET STRING,
hwETrunkBfdSessId
Integer32,
hwETrunkResetCounter
Integer32,
hwETrunkRevertTime
Integer32,
hwETrunkBfdSessName
OCTET STRING,
hwETrunkDescription
OCTET STRING,
hwETrunkAutoBFDEnable
TruthValue,
hwETrunkAutoBFDTrackIfIndex
Integer32,
hwETrunkAutoBFDTxInterval
Integer32,
hwETrunkAutoBFDRxInterval
Integer32,
hwETrunkAutoBFDDetectMultiplier
Integer32,
hwETrunkExpectStatus
INTEGER,
hwETrunkRowStatus
RowStatus
}
hwETrunkId OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the E-Trunk."
::= { hwETrunkEntry 1 }
hwETrunkSystemId OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system ID of the E-Trunk. It is a physical address."
::= { hwETrunkEntry 2 }
hwETrunkPri OBJECT-TYPE
SYNTAX Integer32 (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of the E-Trunk. The default value is 100."
::= { hwETrunkEntry 3 }
hwETrunkStatus OBJECT-TYPE
SYNTAX INTEGER
{
initialize(1),
backup(2),
master(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the E-Trunk.
1:initialize.
2:backup.
3:master. "
::= { hwETrunkEntry 4 }
hwETrunkStatusReason OBJECT-TYPE
SYNTAX INTEGER
{
pri(1),
timeout(2),
bfdDown(3),
peerTimeout(4),
peerBfdDown(5),
allMemberDown(6),
init(7),
peerNodeDown(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the E-Trunk being in the current status.
pri(1):Priority calculation.
timeout(2):The receiving timer timed out.
bfdDown(3):BFD detected the control link between the PE and peer down.
peerTimeout(4):The receiving timer of the peer timed out.
peerBfdDown(5):BFD of the peer detected the control link between the PE and peer down.
allMemberDown(6):All members of the E-Trunk were down.
init(7):Initiated the E-Trunk.
peerNodeDown(8):The peer node is down.
"
::= { hwETrunkEntry 5 }
hwETrunkPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer IP address of the E-Trunk."
::= { hwETrunkEntry 6 }
hwETrunkSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address of the E-Trunk."
::= { hwETrunkEntry 7 }
hwETrunkReceiveFailTimeMultiple OBJECT-TYPE
SYNTAX Integer32 (3..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The detection time multiplier for failure detection. It is the multiple of the sending period."
::= { hwETrunkEntry 8 }
hwETrunkSendPeriod OBJECT-TYPE
SYNTAX Integer32 (5..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The period for sending packets of the E-Trunk. The unit is 100ms. "
::= { hwETrunkEntry 9 }
hwETrunkPacketReceive OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { hwETrunkEntry 10 }
hwETrunkPacketSend OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { hwETrunkEntry 11 }
hwETrunkPacketRecDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the dropped packets when the packets are received."
::= { hwETrunkEntry 12 }
hwETrunkPacketSndDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the dropped packets when the packets are sent."
::= { hwETrunkEntry 13 }
hwETrunkPeerSystemId OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system ID of the peer E-Trunk. It is a physical address."
::= { hwETrunkEntry 14 }
hwETrunkPeerPri OBJECT-TYPE
SYNTAX Integer32 (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the peer E-Trunk."
::= { hwETrunkEntry 15 }
hwETrunkPeerReceiveFailTime OBJECT-TYPE
SYNTAX Integer32 (15..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure time for the peer E-Trunk to receive packets. The unit is 100ms. "
::= { hwETrunkEntry 16 }
hwETrunkSecurityKeyType OBJECT-TYPE
SYNTAX INTEGER
{
simple(1),
cipher(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the security key.
1:The simple encrypt type.
2:The cipher encrypt type. "
::= { hwETrunkEntry 17 }
hwETrunkSecurityKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..392))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be set to a simple password with a string of 0 to 255 characters or a encrypted password with a string less than 392 characters. For security purposes, a get on this returns a zero length string."
::= { hwETrunkEntry 18 }
hwETrunkBfdSessId OBJECT-TYPE
SYNTAX Integer32 (0..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID of a BFD session which is bound to the E-Trunk.
When the status of the BFD session is changed, the status of the E-Trunk is also changed with BFD's status."
::= { hwETrunkEntry 19}
hwETrunkResetCounter OBJECT-TYPE
SYNTAX Integer32 (0..0)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset hwETrunkPacketReceive,hwETrunkPacketSend,hwETrunkPacketRecDrop,hwETrunkPacketSndDrop."
::= { hwETrunkEntry 20 }
hwETrunkRevertTime OBJECT-TYPE
SYNTAX Integer32 (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The delay time to revert. The unit is second. The default is 120. "
::= { hwETrunkEntry 21 }
hwETrunkBfdSessName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a BFD session which is bound to the E-Trunk.
And BFD session name is composed of octet string which is 1 to 15 octet and can't contain space within it.
When the status of the BFD session is changed, the status of the E-Trunk is also changed with BFD's status."
::= { hwETrunkEntry 22}
hwETrunkDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..242))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the E-Trunk. The default is NULL"
::= { hwETrunkEntry 23}
hwETrunkAutoBFDEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether the E-trunk enable auto BFD function. "
::= { hwETrunkEntry 24}
hwETrunkAutoBFDTrackIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the index of an interface which is tracked by the E-Trunk auto BFD session."
::= { hwETrunkEntry 25}
hwETrunkAutoBFDTxInterval OBJECT-TYPE
SYNTAX Integer32 (3..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sending interval of E-Trunk auto BFD session in milliseconds. The default is 10."
::= { hwETrunkEntry 26}
hwETrunkAutoBFDRxInterval OBJECT-TYPE
SYNTAX Integer32 (3..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The receiving interval of E-Trunk auto BFD session in milliseconds. The default is 10."
::= { hwETrunkEntry 27}
hwETrunkAutoBFDDetectMultiplier OBJECT-TYPE
SYNTAX Integer32 (3..50)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The detect multiplier of E-Trunk auto BFD session. The default is 3."
::= { hwETrunkEntry 28}
hwETrunkExpectStatus OBJECT-TYPE
SYNTAX INTEGER
{
backup(1),
master(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expect status of the E-Trunk.
1:backup.
2:master. "
::= { hwETrunkEntry 29 }
hwETrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row. It is used to manage the creation and deletion of conceptual rows."
::= { hwETrunkEntry 50}
--Memeber
hwETrunkMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwETrunkMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The member table of the E-Trunk."
::= { hwETrunkObjects 2 }
hwETrunkMemberEntry OBJECT-TYPE
SYNTAX HwETrunkMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Member Entry."
INDEX { hwETrunkMemberParentId,hwETrunkMemberType, hwETrunkMemberId}
::= { hwETrunkMemberTable 1 }
HwETrunkMemberEntry ::=
SEQUENCE {
hwETrunkMemberParentId
Integer32,
hwETrunkMemberType
Integer32,
hwETrunkMemberId
Unsigned32,
hwETrunkMemberStatus
INTEGER,
hwETrunkMemberStatusReason
INTEGER,
hwETrunkMemberWorkMode
INTEGER,
hwETrunkMemberPhyStatus
INTEGER,
hwETrunkMemberRemoteId
Unsigned32,
hwETrunkMemberRowStatus
RowStatus
}
hwETrunkMemberParentId OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the E-Trunk to which the member belongs."
::= { hwETrunkMemberEntry 1 }
hwETrunkMemberType OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the member. Now it is Eth-Trunk and Global-VE.
1:Eth-Trunk.
2:Global-VE."
::= { hwETrunkMemberEntry 2 }
hwETrunkMemberId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the member."
::= { hwETrunkMemberEntry 3 }
hwETrunkMemberStatus OBJECT-TYPE
SYNTAX INTEGER
{
backup(1),
master(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The member status.
1:backup.
2:master. "
::= { hwETrunkMemberEntry 4 }
hwETrunkMemberStatusReason OBJECT-TYPE
SYNTAX INTEGER
{
forceBackup(1),
forceMaster(2),
etrunkInit(3),
etrunkBackup(4),
etrunkMaster(5),
peerMemberDown(6),
peerMemberUp(7),
activeActive(8),
degradedActive(9),
peerLinkDown(10),
linkDown(11),
allActive(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the member being in the current status.
forceBackup(1):The work mode of the member is force-backup.
forceMaster(2):The work mode of the member is force-master.
etrunkInit(3):The work mode of the member is auto. The status of E-Trunk is initialize.
etrunkBackup(4):The work mode of the member is auto. The status of E-Trunk is backup.
etrunkMaster(5):The work mode of the member is auto. The status of E-Trunk is master.
peerMemberDown(6):The status of the member belonging to the peer E-Trunk is down.
peerMemberUp(7):The status of the member belonging to the peer E-Trunk is up.
activeActive(8):The status of the trill active-active is ok.
degradedActive(9):The status of the trill active-active is fail, but the status of the peerlink is up.
peerLinkDown(10):The status of the trill active-active is fail, and the status of the peerlink is down.
linkDown(11):The status of the E-Trunk member is down.
allActive(12):The E-Trunk member is bound to an EVPN instance, and the redundancy mode is all-active."
::= { hwETrunkMemberEntry 5 }
hwETrunkMemberWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
forceBackup(2),
forceMaster(3),
activeActive(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The work mode of the member.
1:auto.
2:forceBackup.
3:forceMaster.
4:activeActive."
::= { hwETrunkMemberEntry 6 }
hwETrunkMemberPhyStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical status of the member.
1:up.
2:down. "
::= { hwETrunkMemberEntry 7 }
hwETrunkMemberRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ID of a remote E-Trunk member. By default, the ID of a remote E-Trunk member is the same as the ID of the local E-Trunk member. When both ends have E-Trunk member with different IDs, you need to specify the ID of a remote E-Trunk member."
::= { hwETrunkMemberEntry 8 }
hwETrunkMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row. It is used to manage the creation and deletion of conceptual rows."
::= { hwETrunkMemberEntry 50 }
--BackupPort
hwETrunkBackupPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwETrunkBackupPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The backup port table of the E-Trunk."
::= { hwETrunkObjects 3 }
hwETrunkBackupPortEntry OBJECT-TYPE
SYNTAX HwETrunkBackupPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Backup Port Entry."
INDEX { hwETrunkBackupETrunkId}
::= { hwETrunkBackupPortTable 1 }
HwETrunkBackupPortEntry::=
SEQUENCE {
hwETrunkBackupETrunkId
Integer32,
hwETrunkBackupPortNum
Integer32,
hwETrunkBackupPortRowStatus
RowStatus
}
hwETrunkBackupETrunkId OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the E-Trunk."
::= { hwETrunkBackupPortEntry 1 }
hwETrunkBackupPortNum OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The backup port number of the E-Trunk for RBS."
::= { hwETrunkBackupPortEntry 2 }
hwETrunkBackupPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row. It is used to manage the creation and deletion of conceptual rows."
::= { hwETrunkBackupPortEntry 3}
-- Traps.
hwETrunkTraps OBJECT IDENTIFIER ::= { hwETrunkMIB 2 }
hwETrunkStatusChange NOTIFICATION-TYPE
OBJECTS {
hwETrunkStatus,
hwETrunkStatusReason}
STATUS current
DESCRIPTION
"The trap is generated when the status of the E-Trunk is changed or the status reason of the E-Trunk is changed."
::= { hwETrunkTraps 1 }
hwETrunkMemberStatusChange NOTIFICATION-TYPE
OBJECTS {
hwETrunkMemberStatus,
hwETrunkMemberStatusReason}
STATUS current
DESCRIPTION
"The trap is generated when the status of the memeber is changed or the status reason of the memeber is changed."
::= { hwETrunkTraps 2 }
hwETrunkExpectStateChange NOTIFICATION-TYPE
OBJECTS { hwETrunkExpectStatus, hwETrunkStatusReason}
STATUS current
DESCRIPTION
"The trap is generated when the status of the E-Trunk is inconsistant with expected state ."
::= { hwETrunkTraps 3 }
hwETrunkExpectStateResume NOTIFICATION-TYPE
OBJECTS { hwETrunkExpectStatus, hwETrunkStatusReason }
STATUS current
DESCRIPTION
"The expected state trap of E-Trunk resumed."
::= { hwETrunkTraps 4 }
hwETrunkConformance OBJECT IDENTIFIER ::= { hwETrunkMIB 3 }
hwETrunkCompliances OBJECT IDENTIFIER ::= { hwETrunkConformance 1 }
-- this module
hwETrunkFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwETrunkGroup, hwETrunkMemberGroup, hwETrunkNotificationGroup }
::= { hwETrunkCompliances 1 }
hwETrunkGroups OBJECT IDENTIFIER ::= { hwETrunkConformance 2 }
hwETrunkGroup OBJECT-GROUP
OBJECTS {
hwETrunkSystemId,
hwETrunkPri,
hwETrunkStatus,
hwETrunkStatusReason,
hwETrunkPeerIpAddr,
hwETrunkSourceIpAddr,
hwETrunkReceiveFailTimeMultiple,
hwETrunkSendPeriod,
hwETrunkPacketReceive,
hwETrunkPacketSend,
hwETrunkPacketRecDrop,
hwETrunkPacketSndDrop,
hwETrunkPeerSystemId,
hwETrunkPeerPri,
hwETrunkPeerReceiveFailTime,
hwETrunkSecurityKeyType,
hwETrunkSecurityKey,
hwETrunkBfdSessId,
hwETrunkResetCounter,
hwETrunkRevertTime,
hwETrunkBfdSessName,
hwETrunkDescription,
hwETrunkAutoBFDEnable,
hwETrunkAutoBFDTrackIfIndex,
hwETrunkAutoBFDTxInterval,
hwETrunkAutoBFDRxInterval,
hwETrunkAutoBFDDetectMultiplier,
hwETrunkExpectStatus,
hwETrunkRowStatus
}
STATUS current
DESCRIPTION
"Description."
::= { hwETrunkGroups 1 }
hwETrunkMemberGroup OBJECT-GROUP
OBJECTS {
hwETrunkMemberStatus,
hwETrunkMemberStatusReason,
hwETrunkMemberWorkMode,
hwETrunkMemberPhyStatus,
hwETrunkMemberRemoteId,
hwETrunkMemberRowStatus }
STATUS current
DESCRIPTION
"Description."
::= { hwETrunkGroups 2 }
hwETrunkNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwETrunkStatusChange, hwETrunkMemberStatusChange,hwETrunkExpectStateChange,hwETrunkExpectStateResume }
STATUS current
DESCRIPTION
"Description."
::= { hwETrunkGroups 3 }
hwETrunkBackupPortGroup OBJECT-GROUP
OBJECTS {
hwETrunkBackupPortNum,
hwETrunkBackupPortRowStatus }
STATUS current
DESCRIPTION
"The backup port infomation of the E-Trunk."
::= { hwETrunkGroups 4 }
END
--
-- HUAWEI-E-TRUNK-MIB.mib
--