david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/huawei/HUAWEI-L2IF-MIB

1608 lines
55 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Layer Two Interface Management MIB
-- Reference:
-- Version: V2.14
-- History:
-- V1.0
-- ==================================================================
HUAWEI-L2IF-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
TruthValue,TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, OBJECT-IDENTITY, NOTIFICATION-TYPE, Counter64
FROM SNMPv2-SMI
ifIndex,InterfaceIndex,ifDescr
FROM IF-MIB
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
VlanIdOrNone, VlanId
FROM Q-BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB;
hwL2Mgmt OBJECT IDENTIFIER ::= { hwDatacomm 42 }
hwL2IfMib MODULE-IDENTITY
LAST-UPDATED "201708170900Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"information of layer2 interface and information of hybrid port and
information of trunk port"
REVISION "201708170900Z"
DESCRIPTION
"Modify descriptions of the nodes."
REVISION "201611220900Z"
DESCRIPTION
"Add hwL2IfActivePortType."
REVISION "201308060900Z"
DESCRIPTION
"Add hwL2IfActivePortType."
REVISION "201307240900Z"
DESCRIPTION
"Add two l2ifport types:desirable(6),auto(7)."
::= { hwL2Mgmt 1 }
VlanList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 0 through
7, the second octet specifying vlans 8 through 15, etc.
Within each octet, the most significant bit represents
the lowest numbered vlan, and the least significant bit
represents the highest numbered vlan. Thus, each vlan
of the link is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that vlan is included in the set of vlans; the vlan
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- ============================================================================
hwL2IfObjects OBJECT IDENTIFIER ::= { hwL2IfMib 1 }
hwL2Interface OBJECT IDENTIFIER ::= { hwL2IfObjects 1 }
-- ============================================================================
--
-- ======================= definition begin ===================================
--
-- ============================================================================
hwL2IfPortMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max ports that this device supports,BRIDGE-MIB have a resemble definition."
::= { hwL2Interface 1 }
hwL2TopologyDetect OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to enable layer2 topology detection."
::= { hwL2Interface 2 }
-- ===========================================================================
-- layer 2 interface group
-- ===========================================================================
hwL2IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to query and configure the basic attributes of a Layer 2 interface, including number, index, type, default VLAN ID, and the MAC address learning status."
::= { hwL2Interface 3 }
hwL2IfEntry OBJECT-TYPE
SYNTAX HwL2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entries of extended Huawei private interface information table "
INDEX { hwL2IfPortNum }
::= { hwL2IfTable 1}
HwL2IfEntry ::=
SEQUENCE {
hwL2IfPortNum Integer32,
hwL2IfPortIfIndex InterfaceIndex,
hwL2IfPortType INTEGER,
hwL2IfPVID Integer32,
hwL2IfIsSrcMacFilter TruthValue,
hwL2IfMacAddrLearnMode INTEGER,
hwL2IfMacAddressLearn INTEGER,
hwL2IfBcastRatio Integer32,
hwL2IfMcastRatio Integer32,
hwL2IfUcastRatio Integer32,
hwL2IfOutBcastRatio Integer32,
hwL2IfOutMcastRatio Integer32,
hwL2IfOutUcastRatio Integer32,
hwL2IfDiscardBcast EnabledStatus,
hwL2IfDiscardUnknownMcast EnabledStatus,
hwL2IfDiscardUnknownUcast EnabledStatus,
hwL2IfBpdu EnabledStatus,
hwL2IfPortPriority Integer32,
hwL2IfPortName OCTET STRING,
hwL2IfInInvalidVlanPkts Counter64,
hwL2IfFlushEnable EnabledStatus,
hwL2IfFlushControlVlan Integer32,
hwL2IfCurrentInBcastPercent EnabledStatus,
hwL2IfCurrentOutBcastPercent EnabledStatus,
hwL2IfQinqVlanTransEnable EnabledStatus,
hwL2IfQinqVlanTransMissDrop INTEGER,
hwL2IfIpSubnetVlanEnable EnabledStatus,
hwL2IfMacVlanEnable EnabledStatus,
hwL2IfPolicyVlanEnable EnabledStatus,
hwL2IfVlanPrecedence Integer32,
hwL2IfIsolateGroupEnable EnabledStatus,
hwL2IfActivePortType INTEGER
}
hwL2IfPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number of layer2 interface port, a unique value,
for each port.It is recommended that values are assigned
contiguously starting from 1. "
::= { hwL2IfEntry 1 }
hwL2IfPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the index of the Layer 2 interface."
::= { hwL2IfEntry 2 }
hwL2IfPortType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(0),
trunk(1) ,
access(2) ,
hybrid(3) ,
fabric(4),
qinq(5),
desirable(6),
auto(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the type of the Layer 2 interface."
::= { hwL2IfEntry 3 }
hwL2IfPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Layer2 interface Port VLAN ID"
::= { hwL2IfEntry 4 }
hwL2IfIsSrcMacFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Whether to filter source MAC address. We don't support it now."
::= { hwL2IfEntry 5 }
hwL2IfMacAddrLearnMode OBJECT-TYPE
SYNTAX INTEGER
{
iVL(1),
sVL(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the mode for learning MAC addresses."
::= { hwL2IfEntry 6 }
hwL2IfMacAddressLearn OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
discard(3),
invalid(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Status indicates if the interface is allowed to learn mac
address, enable(1) can be setted, (enabled(1) means that
the interface can learn mac address), otherwise disabled(2)
can be setted. discard(3) means the interface will drop packets."
::= { hwL2IfEntry 7 }
--suppression step of percentage mode
hwL2IfBcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed."
::= { hwL2IfEntry 8 }
hwL2IfMcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed."
::= { hwL2IfEntry 9 }
hwL2IfUcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed."
::= { hwL2IfEntry 10 }
hwL2IfOutBcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Outbound broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed."
::= { hwL2IfEntry 11 }
hwL2IfOutMcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Outbound multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed."
::= { hwL2IfEntry 12 }
hwL2IfOutUcastRatio OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Outbound unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed."
::= { hwL2IfEntry 13 }
hwL2IfDiscardBcast OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of droping the broadcast packets,
1:discard; 2:forward(default)."
::= { hwL2IfEntry 14 }
hwL2IfDiscardUnknownMcast OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of droping the unknown mutilcast packets,
1:discard; 2:forward(default)."
::= { hwL2IfEntry 15 }
hwL2IfDiscardUnknownUcast OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of droping the unknown unicast packets,
1:discard; 2:forward(default)."
::= { hwL2IfEntry 16 }
hwL2IfBpdu OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bpdu enable in port."
::= { hwL2IfEntry 17 }
hwL2IfPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port priority about interface."
::= { hwL2IfEntry 18 }
hwL2IfPortName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface name."
::= { hwL2IfEntry 19 }
hwL2IfInInvalidVlanPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of invalid VLAN packets."
::= { hwL2IfEntry 20 }
hwL2IfFlushEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flush enable status of layer2 port."
::= { hwL2IfEntry 21 }
hwL2IfFlushControlVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094 | 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The control vlan of flush packet."
::= { hwL2IfEntry 22 }
hwL2IfCurrentInBcastPercent OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of qinq port trust default priority,
1:enable; 2:disable(default)."
::= { hwL2IfEntry 23 }
hwL2IfCurrentOutBcastPercent OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of port offline status,
1:enable; 2:disable(default)."
::= { hwL2IfEntry 24 }
hwL2IfQinqVlanTransEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable QinQ VLAN translation,
1:enable; 2:disable(default)."
::= { hwL2IfEntry 25 }
hwL2IfQinqVlanTransMissDrop OBJECT-TYPE
SYNTAX INTEGER
{
noDrop(1),
drop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Packets are dropped when a VLAN translation miss occurs,
1:noDrop(default); 2:drop."
::= { hwL2IfEntry 26 }
hwL2IfIpSubnetVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable VLAN assignment based on ip subnet,
1:enable(default); 2:disable."
::= { hwL2IfEntry 27 }
hwL2IfMacVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mac Vlan enable,
1:enable; 2:disable(default)"
::= { hwL2IfEntry 28 }
hwL2IfPolicyVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policy Vlan enable,
1:enable; 2:disable(default)"
::= { hwL2IfEntry 29 }
hwL2IfVlanPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs),
0:MAC VLAN(default); 1:IPSUBNET VLAN."
::= { hwL2IfEntry 30 }
hwL2IfIsolateGroupEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value is disable(2)."
DEFVAL {2}
::= { hwL2IfEntry 31 }
hwL2IfActivePortType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(0),
trunk(1) ,
access(2) ,
hybrid(3) ,
fabric(4),
qinq(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Layer2 interface active port type, it contains invalid(0), trunk(1),
access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now."
::= { hwL2IfEntry 32 }
-- ============================================================================
-- Hybrid port group
-- ============================================================================
hwL2IfHybridPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfHybridPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the VLAN information about Layer 2 hybrid interfaces in tagged and untagged modes."
::= { hwL2Interface 9 }
hwL2IfHybridPortEntry OBJECT-TYPE
SYNTAX HwL2IfHybridPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of Hybrid-port configuration table "
INDEX { hwL2IfHybridPortIndex }
::= { hwL2IfHybridPortTable 1}
HwL2IfHybridPortEntry ::=
SEQUENCE
{
hwL2IfHybridPortIndex Integer32,
hwL2IfHybridTaggedVlanListLow VlanList,
hwL2IfHybridTaggedVlanListHigh VlanList,
hwL2IfHybridUnTaggedVlanListLow VlanList,
hwL2IfHybridUnTaggedVlanListHigh VlanList
}
hwL2IfHybridPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Index of Hybrid-port "
::= { hwL2IfHybridPortEntry 1 }
hwL2IfHybridTaggedVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the low-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used."
::= { hwL2IfHybridPortEntry 2 }
hwL2IfHybridTaggedVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the high-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and VLAN 4095 is not used."
::= { hwL2IfHybridPortEntry 3 }
hwL2IfHybridUnTaggedVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the low-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used."
::= { hwL2IfHybridPortEntry 4 }
hwL2IfHybridUnTaggedVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the high-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and VLAN 4095 is not used."
::= { hwL2IfHybridPortEntry 5 }
-- ============================================================================
-- Trunk port group
-- ============================================================================
hwL2IfTrunkPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfTrunkPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the allowed VLAN information about Layer 2 trunk interfaces."
::= { hwL2Interface 10 }
hwL2IfTrunkPortEntry OBJECT-TYPE
SYNTAX HwL2IfTrunkPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of Trunk-port configuration table "
INDEX { hwL2IfTrunkPortIndex }
::= { hwL2IfTrunkPortTable 1}
HwL2IfTrunkPortEntry ::=
SEQUENCE
{
hwL2IfTrunkPortIndex Integer32,
hwL2IfTrunkAllowPassVlanListLow VlanList,
hwL2IfTrunkAllowPassVlanListHigh VlanList
}
hwL2IfTrunkPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Index of Trunk-port "
::= { hwL2IfTrunkPortEntry 1 }
hwL2IfTrunkAllowPassVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates low-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used."
::= { hwL2IfTrunkPortEntry 2 }
hwL2IfTrunkAllowPassVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates high-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 high-bit VLANs (2048-4095) and 4095 is not used."
::= { hwL2IfTrunkPortEntry 3 }
hwL2IfPortIsolateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfPortIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Port isolate in the same Service-instance table. The Service-instance
is used to communicate among different vlans."
::= { hwL2Interface 11 }
hwL2IfPortIsolateEntry OBJECT-TYPE
SYNTAX HwL2IfPortIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of port isolate configuration table."
INDEX { hwL2IfPortIsolatePortIndex,hwL2IfPortIsolateSIName }
::= { hwL2IfPortIsolateTable 1}
HwL2IfPortIsolateEntry ::=
SEQUENCE
{
hwL2IfPortIsolatePortIndex
Integer32,
hwL2IfPortIsolateSIName
OCTET STRING,
hwL2IfPortIsolateRowStatus
RowStatus
}
hwL2IfPortIsolatePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The port index of L2 interface."
::= { hwL2IfPortIsolateEntry 1 }
hwL2IfPortIsolateSIName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The name of Service-instance.The Service-instance(S.I.)is used to
communicate among different vlans."
::= { hwL2IfPortIsolateEntry 2 }
hwL2IfPortIsolateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The RowStatus of hwL2IfPortIsolateTable."
::= { hwL2IfPortIsolateEntry 3 }
-- ============================================================================
-- hwL2IfSuppressionTable
-- ============================================================================
hwL2IfSuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port suppression configuration table "
::= { hwL2Interface 12 }
hwL2IfSuppressionEntry OBJECT-TYPE
SYNTAX HwL2IfSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of port suppression configuration table "
INDEX { hwL2IfSuppressionPortIndex ,hwL2IfSuppressionType }
::= { hwL2IfSuppressionTable 1}
HwL2IfSuppressionEntry ::=
SEQUENCE
{
hwL2IfSuppressionPortIndex
Integer32,
hwL2IfSuppressionType
INTEGER,
hwL2IfSuppressionCir
Integer32,
hwL2IfSuppressionCbs
Integer32,
hwL2IfSuppressionRowStatus
RowStatus
}
hwL2IfSuppressionPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The port index of L2 interface."
::= { hwL2IfSuppressionEntry 1 }
hwL2IfSuppressionType OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
multicast(2),
unicast(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Type of port suppression command, a unique value from 1 to 3:
1 means broadcast suppression;
2 means multicast suppression;
3 means unicast suppression."
::= { hwL2IfSuppressionEntry 2 }
hwL2IfSuppressionCir OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Committed Information Rate. Unit: kbps."
::= { hwL2IfSuppressionEntry 3 }
hwL2IfSuppressionCbs OBJECT-TYPE
SYNTAX Integer32 (2048..64000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Committed Burst Size. Unit: byte"
::= { hwL2IfSuppressionEntry 4 }
hwL2IfSuppressionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The RowStatus of hwL2IfSuppressionTable
."
::= { hwL2IfSuppressionEntry 5 }
-- ============================================================================
-- hwL2IfVlanSuppressionTable
-- ============================================================================
hwL2IfVlanSuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfVlanSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and Vlan suppression configuration table "
::= { hwL2Interface 13 }
hwL2IfVlanSuppressionEntry OBJECT-TYPE
SYNTAX HwL2IfVlanSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of port and Vlan suppression configuration table "
INDEX { hwL2IfVlanSuppressionPortIndex ,hwL2IfVlanSuppressionStartVlan, hwL2IfVlanSuppressionEndVlan }
::= { hwL2IfVlanSuppressionTable 1}
HwL2IfVlanSuppressionEntry ::=
SEQUENCE
{
hwL2IfVlanSuppressionPortIndex
Integer32,
hwL2IfVlanSuppressionStartVlan
Integer32,
hwL2IfVlanSuppressionEndVlan
Integer32,
hwL2IfVlanSuppressionCir
Integer32,
hwL2IfVlanSuppressionCbs
Integer32,
hwL2IfVlanSuppressionRowStatus
RowStatus
}
hwL2IfVlanSuppressionPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The port index of L2 interface."
::= { hwL2IfVlanSuppressionEntry 1 }
hwL2IfVlanSuppressionStartVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The start vlan-id of port and vlan suppression."
::= { hwL2IfVlanSuppressionEntry 2 }
hwL2IfVlanSuppressionEndVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The end vlan-id of port and vlan suppression."
::= { hwL2IfVlanSuppressionEntry 3 }
hwL2IfVlanSuppressionCir OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Committed Information Rate. Unit: kbps."
::= { hwL2IfVlanSuppressionEntry 4 }
hwL2IfVlanSuppressionCbs OBJECT-TYPE
SYNTAX Integer32 (2048..64000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Committed Burst Size. Unit: byte"
::= { hwL2IfVlanSuppressionEntry 5 }
hwL2IfVlanSuppressionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The RowStatus of hwL2IfVlanSuppressionTable
."
::= { hwL2IfVlanSuppressionEntry 6 }
hwL2IfPortTcnTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfPortTcnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Port TCN in the same Service-instance table. The Service-instance
is used to configure TCN."
::= { hwL2Interface 14 }
hwL2IfPortTcnEntry OBJECT-TYPE
SYNTAX HwL2IfPortTcnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of port TCN configuration table."
INDEX { hwL2IfTcnPortIndex }
::= { hwL2IfPortTcnTable 1}
HwL2IfPortTcnEntry ::=
SEQUENCE
{
hwL2IfTcnPortIndex
Integer32,
hwL2IfTcnStp
EnabledStatus,
hwL2IfTcnSmartLink
EnabledStatus,
hwL2IfTcnVlanListLow
OCTET STRING,
hwL2IfTcnVlanListHigh
OCTET STRING
}
hwL2IfTcnPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The port index of L2 interface."
::= { hwL2IfPortTcnEntry 1 }
hwL2IfTcnStp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Status indicates if the interface is allowed to notify stp TCN message
, enable(1) can be setted, (enabled(1) means that
the interface can notify TCN), otherwise disabled(2)
can be setted."
::= { hwL2IfPortTcnEntry 2 }
hwL2IfTcnSmartLink OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Status indicates if the interface is allowed to notify SmartLink TCN message,
enable(1) can be setted, (enabled(1) means that
the interface can notify TCN), otherwise disabled(2)
can be setted."
::= { hwL2IfPortTcnEntry 3 }
hwL2IfTcnVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lowest possible value of the vlan list on the
Tcn-port."
::= { hwL2IfPortTcnEntry 4 }
hwL2IfTcnVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The highest possible value of the vlan list on the
Tcn-port."
::= { hwL2IfPortTcnEntry 5 }
hwL2IfPortLoopDetectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfPortLoopDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the port external loopback detection information for device.
It can protect the port from external loopback."
::= { hwL2Interface 15 }
hwL2IfPortLoopDetectEntry OBJECT-TYPE
SYNTAX HwL2IfPortLoopDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the port external loopback detection table."
INDEX { hwL2IfPortLoopDetectPort }
::= { hwL2IfPortLoopDetectTable 1 }
HwL2IfPortLoopDetectEntry ::=
SEQUENCE {
hwL2IfPortLoopDetectPort
Integer32,
hwL2IfPortLoopDetectEnabled
EnabledStatus,
hwL2IfPortLoopDetectInterval
Integer32,
hwL2IfPortLoopDetectAction
INTEGER,
hwL2IfPortLoopDetectStatus
INTEGER,
hwL2IfPortLoopDetectProtocol
OCTET STRING
}
hwL2IfPortLoopDetectPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number which will be configured port external loopback detection."
::= { hwL2IfPortLoopDetectEntry 1 }
hwL2IfPortLoopDetectEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' Port external loopback detection
is enabled on this port else disabled."
::= { hwL2IfPortLoopDetectEntry 2 }
hwL2IfPortLoopDetectInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The detect period of port external loopback detection."
::= { hwL2IfPortLoopDetectEntry 3 }
hwL2IfPortLoopDetectAction OBJECT-TYPE
SYNTAX INTEGER
{
shutdown(1),
block(2),
trap(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port external loopback detection protect action of this entry."
::= { hwL2IfPortLoopDetectEntry 4 }
hwL2IfPortLoopDetectStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
block(2),
shutdown(3),
trap(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of port(block/shutdown/trap/normal)."
::= { hwL2IfPortLoopDetectEntry 5 }
hwL2IfPortLoopDetectProtocol OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ethernet type of the detecting packet to port external loopback detection."
::= { hwL2IfPortLoopDetectEntry 6 }
hwL2IfPortProtocolVlanDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfPortProtocolVlanDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of protocol vlan by port."
::= { hwL2Interface 16 }
hwL2IfPortProtocolVlanDataEntry OBJECT-TYPE
SYNTAX HwL2IfPortProtocolVlanDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of protocol vlan by port."
INDEX { hwL2IfPortProtocolVlanDataPortIndex }
::= { hwL2IfPortProtocolVlanDataTable 1 }
HwL2IfPortProtocolVlanDataEntry ::=
SEQUENCE {
hwL2IfPortProtocolVlanDataPortIndex
Integer32,
hwL2IfPortProtocolVlanDataVlan
Integer32,
hwL2IfPortProtocolVlanDataPri
Integer32,
hwL2IfPortProtocolVlanDataRowStatus
RowStatus
}
hwL2IfPortProtocolVlanDataPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..479)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol vlan Index of port ."
::= { hwL2IfPortProtocolVlanDataEntry 1 }
hwL2IfPortProtocolVlanDataVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID."
::= { hwL2IfPortProtocolVlanDataEntry 2 }
hwL2IfPortProtocolVlanDataPri OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN PRI."
::= { hwL2IfPortProtocolVlanDataEntry 3 }
hwL2IfPortProtocolVlanDataRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2IfPortProtocolVlanDataEntry 4 }
-- ============================================================================
-- hwL2IfPwSuppressionTable
-- ============================================================================
hwL2IfPwSuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfPwSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Pw suppression configuration table "
::= { hwL2Interface 17 }
hwL2IfPwSuppressionEntry OBJECT-TYPE
SYNTAX HwL2IfPwSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the configuration table for PW-based unknown
traffic suppression."
INDEX { hwL2IfPwSuppressionVsiName,hwL2IfPwSuppressionPwName,hwL2IfPwSuppressionType }
::= { hwL2IfPwSuppressionTable 1}
HwL2IfPwSuppressionEntry ::=
SEQUENCE
{
hwL2IfPwSuppressionVsiName
OCTET STRING,
hwL2IfPwSuppressionPwName
OCTET STRING,
hwL2IfPwSuppressionType
INTEGER,
hwL2IfPwSuppressionCir
Integer32,
hwL2IfPwSuppressionCbs
Integer32,
hwL2IfPwSuppressionRowStatus
RowStatus
}
hwL2IfPwSuppressionVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the VSI that is configured with PW-based
unknown traffic suppression."
::= { hwL2IfPwSuppressionEntry 1 }
hwL2IfPwSuppressionPwName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the PW that is configured with PW-based
unknown traffic suppression."
::= { hwL2IfPwSuppressionEntry 2 }
hwL2IfPwSuppressionType OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
multicast(2),
unicast(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of PW-based unknown traffic suppression:
1: broadcast suppression
2: multicast suppression
3: unknown unicast suppression"
::= { hwL2IfPwSuppressionEntry 3 }
hwL2IfPwSuppressionCir OBJECT-TYPE
SYNTAX Integer32 (100..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Committed Information Rate. Unit: kbit/s."
::= { hwL2IfPwSuppressionEntry 4 }
hwL2IfPwSuppressionCbs OBJECT-TYPE
SYNTAX Integer32 (100..33554432)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Committed Burst Size. Unit: byte."
::= { hwL2IfPwSuppressionEntry 5 }
hwL2IfPwSuppressionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the RowStatus of hwPwSuppressionTable."
::= { hwL2IfPwSuppressionEntry 50 }
-- ============================================================================
-- hwL2IfLoopDetectInterval
-- ============================================================================
hwL2IfLoopDetectInterval OBJECT-TYPE
SYNTAX Integer32 (5..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The detect period of system external loopback detection."
::= { hwL2Interface 18 }
-- ============================================================================
-- real-time relationship of port-vlan
-- ============================================================================
hwL2IfDynamicPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfDynamicPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dynamic relationship of port-vlan."
::= { hwL2Interface 19 }
hwL2IfDynamicPortVlanEntry OBJECT-TYPE
SYNTAX HwL2IfDynamicPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of dynamic port-vlan relationship table."
INDEX { hwL2IfDynamicPortVlanPortIndex,hwL2IfDynamicPortVlanServiceType }
::= { hwL2IfDynamicPortVlanTable 1}
HwL2IfDynamicPortVlanEntry ::=
SEQUENCE
{
hwL2IfDynamicPortVlanPortIndex
Integer32,
hwL2IfDynamicPortVlanServiceType
INTEGER,
hwL2IfDynamicPortVlanPvid
VlanIdOrNone,
hwL2IfDynamicPortVlanUntaggedVlanListLow
VlanList,
hwL2IfDynamicPortVlanUntaggedVlanListHigh
VlanList,
hwL2IfDynamicPortVlanTaggedVlanListLow
VlanList,
hwL2IfDynamicPortVlanTaggedVlanListHigh
VlanList
}
hwL2IfDynamicPortVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port index of switch-port."
::= { hwL2IfDynamicPortVlanEntry 1 }
hwL2IfDynamicPortVlanServiceType OBJECT-TYPE
SYNTAX INTEGER
{
configured(1),
gvrp(2),
voiceVLAN(3),
unAuthenUserVLAN(4),
dynAuthenVLAN(5),
hvrp(6),
elmi(7),
macFlapping(8),
loopbackDetect(9),
loopDetection(10)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Service type of dynamic port-vlan relationship table."
::= { hwL2IfDynamicPortVlanEntry 2 }
hwL2IfDynamicPortVlanPvid OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dynamic PVID of port-vlan table."
::= { hwL2IfDynamicPortVlanEntry 3 }
hwL2IfDynamicPortVlanUntaggedVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest possible value of the untagged vlan list of dynamic port-vlan table."
::= { hwL2IfDynamicPortVlanEntry 4 }
hwL2IfDynamicPortVlanUntaggedVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest possible value of the untagged vlan list of Dynamic port-vlan table."
::= { hwL2IfDynamicPortVlanEntry 5 }
hwL2IfDynamicPortVlanTaggedVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest possible value of the tagged vlan list of Dynamic port-vlan table."
::= { hwL2IfDynamicPortVlanEntry 6 }
hwL2IfDynamicPortVlanTaggedVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest possible value of the tagged vlan list of Dynamic port-vlan table."
::= { hwL2IfDynamicPortVlanEntry 7 }
hwL2IfTraps OBJECT IDENTIFIER ::= { hwL2IfObjects 2 }
hwL2IfInvalidVlanPacketAlarm NOTIFICATION-TYPE
OBJECTS {hwL2IfPortName,hwL2IfInInvalidVlanPkts}
STATUS current
DESCRIPTION
"Warning of receiving invalid VLAN packets in the interface."
::= { hwL2IfTraps 1 }
hwInBcastRisingThreshold NOTIFICATION-TYPE
OBJECTS {ifDescr,hwL2IfPortLoopDetectStatus}
STATUS current
DESCRIPTION
"Port status changed because loopback detect.(Normal/Block/Shutdown/Trap)"
::= { hwL2IfTraps 2 }
hwL2IfConformance OBJECT IDENTIFIER ::= { hwL2IfMib 2 }
hwL2IfCompliances OBJECT IDENTIFIER ::= { hwL2IfConformance 1 }
hwL2IfMacAddrGroup OBJECT-GROUP
OBJECTS{
hwL2IfMacAddrLearnMode ,
hwL2IfMacAddressLearn
}
STATUS current
DESCRIPTION
"A collection of objects indicate mac address learn of the interface."
::= { hwL2IfGroups 1 }
hwL2IfBroadcastRatioGroup OBJECT-GROUP
OBJECTS
{
hwL2IfBcastRatio,
hwL2IfMcastRatio,
hwL2IfUcastRatio,
hwL2IfOutBcastRatio ,
hwL2IfOutMcastRatio ,
hwL2IfOutUcastRatio
}
STATUS current
DESCRIPTION
"A collection of objects indicate broadcast-suppression ratio."
::= { hwL2IfGroups 2 }
hwL2IfHybridTaggedVlanGroup OBJECT-GROUP
OBJECTS
{
hwL2IfHybridTaggedVlanListLow ,
hwL2IfHybridTaggedVlanListHigh ,
hwL2IfHybridUnTaggedVlanListLow ,
hwL2IfHybridUnTaggedVlanListHigh
}
STATUS current
DESCRIPTION
"A collection of objects indicate lowest/highest possible value of
the tagged/untagged vlan list on the Hybrid-port."
::= { hwL2IfGroups 3 }
hwL2IfTrunkAllowPassVlanListGroup OBJECT-GROUP
OBJECTS
{
hwL2IfTrunkAllowPassVlanListLow ,
hwL2IfTrunkAllowPassVlanListHigh
}
STATUS current
DESCRIPTION
"A collection of objects indicate lowest/highed possible value of the
allowed and passed vlan list on the Trunk-port."
::= { hwL2IfGroups 4 }
hwL2IfPortGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortIfIndex,
hwL2IfIsSrcMacFilter
}
STATUS current
DESCRIPTION
"A collection of objects indicate index of layer2 port."
::= { hwL2IfGroups 5 }
hwL2IfPVIDGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPVID
}
STATUS current
DESCRIPTION
"A collection of objects indicate PVID of layer2 interface."
::= { hwL2IfGroups 6 }
hwL2IfPortTypeGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortType,
hwL2IfActivePortType
}
STATUS current
DESCRIPTION
"A collection of objects indicate VLAN type of layer2 interface."
::= { hwL2IfGroups 7 }
hwL2IfPortMaxGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortMax,
hwL2TopologyDetect
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the device supports maxmum of
port ."
::= { hwL2IfGroups 8 }
hwL2IfPortExtGroup OBJECT-GROUP
OBJECTS
{
hwL2IfBpdu,
hwL2IfDiscardBcast,
hwL2IfDiscardUnknownMcast,
hwL2IfDiscardUnknownUcast,
hwL2IfPortPriority,
hwL2IfPortName,
hwL2IfInInvalidVlanPkts,
hwL2IfFlushEnable,
hwL2IfFlushControlVlan,
hwL2IfCurrentInBcastPercent,
hwL2IfCurrentOutBcastPercent,
hwL2IfQinqVlanTransEnable,
hwL2IfQinqVlanTransMissDrop,
hwL2IfIpSubnetVlanEnable,
hwL2IfMacVlanEnable,
hwL2IfPolicyVlanEnable,
hwL2IfVlanPrecedence,
hwL2IfIsolateGroupEnable
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the device supports attribute of
port ."
::= { hwL2IfGroups 9 }
hwL2IfPortIsolateGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortIsolateRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the device supports islation of port ."
::= { hwL2IfGroups 10 }
hwL2IfAlarmGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
hwL2IfInvalidVlanPacketAlarm,
hwInBcastRisingThreshold
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the device supports alarm of port ."
::= { hwL2IfGroups 11 }
hwL2IfSuppressionGroup OBJECT-GROUP
OBJECTS
{
hwL2IfSuppressionCir,
hwL2IfSuppressionCbs,
hwL2IfSuppressionRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects that L2IfSuppression."
::= { hwL2IfGroups 12 }
hwL2IfVlanSuppressionGroup OBJECT-GROUP
OBJECTS
{
hwL2IfVlanSuppressionCir,
hwL2IfVlanSuppressionCbs,
hwL2IfVlanSuppressionRowStatus
}
STATUS current
DESCRIPTION
"A collection of values indicate that 'Committed infomation rate'."
::= { hwL2IfGroups 13 }
hwL2IfPortTcnGroup OBJECT-GROUP
OBJECTS
{
hwL2IfTcnStp,
hwL2IfTcnSmartLink,
hwL2IfTcnVlanListLow,
hwL2IfTcnVlanListHigh
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the device supports islation of port ."
::= { hwL2IfGroups 14 }
hwL2IfPortLoopDetectGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortLoopDetectEnabled,
hwL2IfPortLoopDetectInterval,
hwL2IfPortLoopDetectAction,
hwL2IfPortLoopDetectStatus,
hwL2IfPortLoopDetectProtocol,
hwL2IfLoopDetectInterval
}
STATUS current
DESCRIPTION
"A collection of objects indicate that the port external loopback detection."
::= { hwL2IfGroups 15 }
hwL2IfPortProtocolVlanDataGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPortProtocolVlanDataVlan,
hwL2IfPortProtocolVlanDataPri,
hwL2IfPortProtocolVlanDataRowStatus
}
STATUS current
DESCRIPTION
"The entry of protocol vlan by port."
::= { hwL2IfGroups 16 }
hwL2IfPwSuppressionGroup OBJECT-GROUP
OBJECTS
{
hwL2IfPwSuppressionCir,
hwL2IfPwSuppressionCbs,
hwL2IfPwSuppressionRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects in L2IfPwSuppression."
::= { hwL2IfGroups 17 }
hwL2IfDynamicPortVlanTableGroup OBJECT-GROUP
OBJECTS
{
hwL2IfDynamicPortVlanPvid,
hwL2IfDynamicPortVlanUntaggedVlanListLow,
hwL2IfDynamicPortVlanUntaggedVlanListHigh,
hwL2IfDynamicPortVlanTaggedVlanListLow,
hwL2IfDynamicPortVlanTaggedVlanListHigh
}
STATUS current
DESCRIPTION
"A collection of objects of dynamic relationship of port-vlan."
::= { hwL2IfGroups 19 }
-- ============================================================================
-- compliance statements
-- ============================================================================
hwL2IfCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities implementing
the Huawei layer two interface management MIB"
MODULE
MANDATORY-GROUPS { hwL2IfMacAddrGroup }
GROUP hwL2IfBroadcastRatioGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfHybridTaggedVlanGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfTrunkAllowPassVlanListGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfPortGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfPVIDGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfPortTypeGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfPortMaxGroup
DESCRIPTION
"This group supports in every device."
GROUP hwL2IfPortExtGroup
DESCRIPTION
"This group supports in every device."
::= { hwL2IfCompliances 1 }
hwL2IfGroups OBJECT IDENTIFIER ::= { hwL2IfConformance 2 }
END
Reference in New Issue Copy Permalink