mibs/MIBS/huawei/HUAWEI-RM-EXT-MIB

2545 lines
77 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This mib file is used for Manage the static route table configuration.
-- Reference:
-- Version: V2.18
--
-- ============================================================================
HUAWEI-RM-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex, entPhysicalName
FROM ENTITY-MIB
hwDatacomm
FROM HUAWEI-MIB
Ipv6Address
FROM IPV6-TC
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.2011.5.25.145
hwRmExt MODULE-IDENTITY
LAST-UPDATED "201708172055Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This mib file is used for Manage the static route table configuration."
REVISION "201708172055Z" -- Aug 17, 2017 at 20:55 GMT
DESCRIPTION "modify hwRouteStatTable,hwIpv6PrefixLimitValue,hwRouteStatVpnName,hwTunnelGroupUp,hwTunnelGroupDown,hwIpv4PrefixExceed,hwIpv4PrefixExceedClear,hwIpv6PrefixExceed,hwIpv6PrefixExceedClear discription"
REVISION "201703290000Z" -- JULY 28, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.17, add hwIpv6StaticRoutePermanent node"
REVISION "201703290000Z" -- JUNE 5, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.16, modify table's description"
-- Revision history
REVISION "201703290000Z" -- JUNE 5, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.15, modify table's description"
REVISION "201703290000Z" -- JUNE 4, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.14, modify hwL3vpnVrfV6Up's description"
REVISION "201703290000Z" -- JUNE 4, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.13, Add hwL3vpnVrfV6Up,hwL3vpnVrfV6Down"
REVISION "201703290000Z" -- Mar 30, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.12, Modify the description of hwIpv4PrefixExceed,hwIpv4PrefixExceedClear,hwIpv6PrefixExceed,hwIpv6PrefixExceedClear"
REVISION "201703290000Z" -- Mar 29, 2017 at 00:00 GMT
DESCRIPTION
"Version V2.11, add hwFibStatisticObject"
REVISION "201612290000Z" -- Dec 29, 2016 at 00:00 GMT
DESCRIPTION
"Version: V2.10, Add hwVlinkTraps,hwVlinkImportExceed."
REVISION "201602290000Z" -- Feb 29, 2016 at 00:00 GMT
DESCRIPTION
"Version: V2.09, Chang hwNhmRestrain,hwNhmRestrainClear."
REVISION "201602180000Z" -- Feb 18, 2016 at 00:00 GMT
DESCRIPTION
"Version: V2.08, Add hwNhmRestrain,hwNhmRestrainClear."
REVISION "201511180000Z" -- Nov 18, 2015 at 00:00 GMT
DESCRIPTION
"Version: V2.07, Change the description of hwTunnelGroupUp and hwTunnelGroupDown."
REVISION "201412110000Z" -- Dec 11, 2014 at 00:00 GMT
DESCRIPTION
"Version: V2.06, modify hwEvpnMacLimitTrapObjects to hwEvpnMacObjects,
modify hwEvpnMacLimitTraps,
add hwEvpnMacUpperLimitValue, hwEvpnMacLowerLimitValue, hwEvpnMacLimitValue."
REVISION "201412100000Z" -- Dec 10, 2014 at 00:00 GMT
DESCRIPTION
"Version: V2.05, Add hwEvpnMacLimitTrapObjects, hwEvpnMacLimitTraps, hwEvpnMacLimitConformance."
REVISION "201412090000Z"
DESCRIPTION
"updated the static-route description text , it's length change from 35 to 80."
REVISION "201406300000Z"
DESCRIPTION
"golbal->global."
REVISION "201406200000Z" -- June 20, 2014 at 00:00 GMT
DESCRIPTION
"add hwRmInfo, hwIpv6PrefixLimitVpnName, hwL3vpnIpv6PrefixLimitTraps."
REVISION "201306090000Z" -- June 09, 2013 at 00:00 GMT
DESCRIPTION
"V1.4, destionation->destination."
REVISION "201304221526Z" -- April 22, 2013 at 15:26 GMT
DESCRIPTION
"V1.3, add IPv6 static route table mib."
REVISION "201011250000Z" -- November 25, 2010 at 00:00 GMT
DESCRIPTION
"V1.2, updated the description."
REVISION "201008200000Z" -- August 20, 2010 at 00:00 GMT
DESCRIPTION
"V1.1, modify format of enumerations and description."
REVISION "200811100000Z" -- November 10, 2008 at 00:00 GMT
DESCRIPTION
"V1.0, the first draft"
::= { hwDatacomm 145 }
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.25.145.1
hwRmExtObjects OBJECT IDENTIFIER ::= { hwRmExt 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1
hwStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used for creating static routes."
::= { hwRmExtObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1
hwStaticRouteEntry OBJECT-TYPE
SYNTAX HwStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used for creating static routes."
INDEX { hwStaticRouteSourceVpnName, hwStaticRouteDestIpAddr, hwStaticRouteDestMaskAddr, hwStaticRouteDestVpnName, hwStaticRouteNextHop,
hwStaticRouteOutIfIndex }
::= { hwStaticRouteTable 1 }
HwStaticRouteEntry ::=
SEQUENCE {
hwStaticRouteSourceVpnName
OCTET STRING,
hwStaticRouteDestIpAddr
IpAddress,
hwStaticRouteDestMaskAddr
IpAddress,
hwStaticRouteDestVpnName
OCTET STRING,
hwStaticRouteNextHop
IpAddress,
hwStaticRouteOutIfIndex
Unsigned32,
hwStaticRouteBfdName
OCTET STRING,
hwStaticRoutePrefer
Integer32,
hwStaticRouteDescrip
OCTET STRING,
hwStaticRouteRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.1
hwStaticRouteSourceVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of a static route's source VPN."
::= { hwStaticRouteEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.2
hwStaticRouteDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { hwStaticRouteEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.3
hwStaticRouteDestMaskAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask of the destination address."
::= { hwStaticRouteEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.4
hwStaticRouteDestVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of a destination VPN."
::= { hwStaticRouteEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.5
hwStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next hop of static routes."
::= { hwStaticRouteEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.6
hwStaticRouteOutIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The out interface ifnet index of static routes."
::= { hwStaticRouteEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.7
hwStaticRouteBfdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of a BFD session to which
static routes are to be bound."
::= { hwStaticRouteEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.8
hwStaticRoutePrefer OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference of static routes."
::= { hwStaticRouteEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.9
hwStaticRouteDescrip OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the static routes."
::= { hwStaticRouteEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.145.1.1.1.10
hwStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1)
2. createAndGo(4) -create a static route
3. destroy(6) -delete a static route
"
::= { hwStaticRouteEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2
hwRouteStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the information, such as the syntax, description, access, and status, about various objects of hwIpv6RouteStatTable."
::= { hwRmExtObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1
hwRouteStatEntry OBJECT-TYPE
SYNTAX HwRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is a route statistics table."
INDEX { hwRouteStatVpnName, hwRouteStatProtocolId }
::= { hwRouteStatTable 1 }
HwRouteStatEntry ::=
SEQUENCE {
hwRouteStatVpnName
OCTET STRING,
hwRouteStatProtocolId
INTEGER,
hwRouteStatTotal
Unsigned32,
hwRouteStatActive
Unsigned32,
hwRouteStatAdded
Unsigned32,
hwRouteStatDeleted
Unsigned32,
hwRouteStatFreed
Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.1
hwRouteStatVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the IPv4 VPN instance to which a static route belongs."
::= { hwRouteStatEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.2
hwRouteStatProtocolId OBJECT-TYPE
SYNTAX INTEGER
{
direct(1),
static(2),
ospf(3),
isis(6),
rip(7),
bgp(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the protocol ID of the route.
Options:
1. direct(1) -indicates the direct route
2. static(2) -indicates the static route
3. ospf(3) -indicates the OSPF route
4. isis(6) -indicates the IS-IS route
5. rip(7) -indicates the RIP route
6. bgp(8) -indicates the BGP route"
::= { hwRouteStatEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.3
hwRouteStatTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of routes of a protocol."
::= { hwRouteStatEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.4
hwRouteStatActive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active routes of a protocol."
::= { hwRouteStatEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.5
hwRouteStatAdded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of added routes of a protocol."
::= { hwRouteStatEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.6
hwRouteStatDeleted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of deleted routes of a protocol."
::= { hwRouteStatEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.2.1.7
hwRouteStatFreed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of released routes of a protocol."
::= { hwRouteStatEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3
hwIpv6RouteStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpv6RouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is an IPv6 route statistics table.
Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes."
::= { hwRmExtObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1
hwIpv6RouteStatEntry OBJECT-TYPE
SYNTAX HwIpv6RouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is an IPv6 route statistics table.
Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes."
INDEX { hwIpv6RouteStatVpnName, hwIpv6RouteStatProtocolId }
::= { hwIpv6RouteStatTable 1 }
HwIpv6RouteStatEntry ::=
SEQUENCE {
hwIpv6RouteStatVpnName
OCTET STRING,
hwIpv6RouteStatProtocolId
INTEGER,
hwIpv6RouteStatTotal
Unsigned32,
hwIpv6RouteStatActive
Unsigned32,
hwIpv6RouteStatAdded
Unsigned32,
hwIpv6RouteStatDeleted
Unsigned32,
hwIpv6RouteStatFreed
Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.1
hwIpv6RouteStatVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the IPv6 VPN instance for static routes."
::= { hwIpv6RouteStatEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.2
hwIpv6RouteStatProtocolId OBJECT-TYPE
SYNTAX INTEGER
{
direct(1),
static(2),
ospf(3),
isis(6),
rip(7),
bgp(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the protocol ID of the route.
Options:
1. direct(1) -indicates the IPv6 direct route
2. static(2) -indicates the IPv6 static route
3. ospf(3) -indicates the IPv6 OSPF route
4. isis(6) -indicates the IPv6 IS-IS route
5. rip(7) -indicates the IPv6 RIP route
6. bgp(8) -indicates the IPv6 BGP route"
::= { hwIpv6RouteStatEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.3
hwIpv6RouteStatTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of routes of a protocol."
::= { hwIpv6RouteStatEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.4
hwIpv6RouteStatActive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active routes of a protocol."
::= { hwIpv6RouteStatEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.5
hwIpv6RouteStatAdded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of added routes of a protocol."
::= { hwIpv6RouteStatEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.6
hwIpv6RouteStatDeleted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of deleted routes of a protocol."
::= { hwIpv6RouteStatEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.3.1.7
hwIpv6RouteStatFreed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of released routes of a protocol."
::= { hwIpv6RouteStatEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4
hwStaticRouteExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStaticRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is a static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. "
::= { hwRmExtObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1
hwStaticRouteExtEntry OBJECT-TYPE
SYNTAX HwStaticRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is a static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. "
INDEX { hwStaticRouteSourceVpnNameExt, hwStaticRouteDestIpAddrExt, hwStaticRouteDestMaskAddrExt, hwStaticRouteNextHopExt, hwStaticRouteOutIfIndexExt
}
::= { hwStaticRouteExtTable 1 }
HwStaticRouteExtEntry ::=
SEQUENCE {
hwStaticRouteSourceVpnNameExt
OCTET STRING,
hwStaticRouteDestIpAddrExt
IpAddress,
hwStaticRouteDestMaskAddrExt
IpAddress,
hwStaticRouteNextHopExt
IpAddress,
hwStaticRouteOutIfIndexExt
Unsigned32,
hwStaticRouteDestVpnNameExt
OCTET STRING,
hwStaticRouteBfdNameExt
OCTET STRING,
hwStaticRoutePreferExt
Unsigned32,
hwStaticRouteDescripExt
OCTET STRING,
hwStaticRouteRowStatusExt
RowStatus,
hwStaticRoutePermanentExt
INTEGER,
hwStaticRouteLdpSyncExt
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.1
hwStaticRouteSourceVpnNameExt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of source VPN for static route."
::= { hwStaticRouteExtEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.2
hwStaticRouteDestIpAddrExt OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { hwStaticRouteExtEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.3
hwStaticRouteDestMaskAddrExt OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask of the destination address."
::= { hwStaticRouteExtEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.4
hwStaticRouteNextHopExt OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next hop of static route."
::= { hwStaticRouteExtEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.5
hwStaticRouteOutIfIndexExt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifnet index of the outgoing interface of static route."
::= { hwStaticRouteExtEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.6
hwStaticRouteDestVpnNameExt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the destination VPN for gateway address."
::= { hwStaticRouteExtEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.7
hwStaticRouteBfdNameExt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of a BFD session to which
static routes are to be bound."
::= { hwStaticRouteExtEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.8
hwStaticRoutePreferExt OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference of static route."
::= { hwStaticRouteExtEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.9
hwStaticRouteDescripExt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of static route."
::= { hwStaticRouteExtEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.10
hwStaticRouteRowStatusExt OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status."
::= { hwStaticRouteExtEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.11
hwStaticRoutePermanentExt OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
permanent(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the permanent-Advertising attribute of the static route:
Options:
1. none(0) -indicates that the permanent-Advertising attribute is not specified
2. permanent(1) -indicates that the permanent-Advertising attribute is specified"
::= { hwStaticRouteExtEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.145.1.4.1.12
hwStaticRouteLdpSyncExt OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
ldpsync(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the LdpSync-Advertising attribute of the static route:
Options:
1. none(0) -indicates that the LdpSync-Advertising attribute is not specified
2. ldpsync(1) -indicates that the LdpSync-Advertising attribute is specified"
::= { hwStaticRouteExtEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5
hwIpv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is an IPv6 static route table.
Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. "
::= { hwRmExtObjects 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1
hwIpv6StaticRouteEntry OBJECT-TYPE
SYNTAX HwIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is an IPv6 static route table.
Supports the create/destroy/modify/display operation on Ipv6 static routes and BFD session binding/unbinding with static routes. "
INDEX { hwIpv6StaticRouteSourceVpnName, hwIpv6StaticRouteDestIpAddr, hwIpv6StaticRoutePrefixLen, hwIpv6StaticRouteNextHop, hwIpv6StaticRouteOutIfIndex
}
::= { hwIpv6StaticRouteTable 1 }
HwIpv6StaticRouteEntry ::=
SEQUENCE {
hwIpv6StaticRouteSourceVpnName
OCTET STRING,
hwIpv6StaticRouteDestIpAddr
Ipv6Address,
hwIpv6StaticRoutePrefixLen
Unsigned32,
hwIpv6StaticRouteNextHop
Ipv6Address,
hwIpv6StaticRouteOutIfIndex
Unsigned32,
hwIpv6StaticRouteDestVpnName
OCTET STRING,
hwIpv6StaticRouteBfdName
OCTET STRING,
hwIpv6StaticRouteNqaAdminName
OCTET STRING,
hwIpv6StaticRouteNqaTestName
OCTET STRING,
hwIpv6StaticRoutePrefer
Unsigned32,
hwIpv6StaticRouteTag
Unsigned32,
hwIpv6StaticRouteDescr
OCTET STRING,
hwIpv6StaticRouteRowStatus
RowStatus,
hwIpv6StaticRoutePermanent
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.1
hwIpv6StaticRouteSourceVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of source VPN for IPv6 static route."
::= { hwIpv6StaticRouteEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.2
hwIpv6StaticRouteDestIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route."
::= { hwIpv6StaticRouteEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.3
hwIpv6StaticRoutePrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask length of the IPv6 address."
::= { hwIpv6StaticRouteEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.4
hwIpv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next hop of an IPv6 static route."
::= { hwIpv6StaticRouteEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.5
hwIpv6StaticRouteOutIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the outgoing interface of an IPv6 static route."
::= { hwIpv6StaticRouteEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.6
hwIpv6StaticRouteDestVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the destination VPN for IPv6 static route."
::= { hwIpv6StaticRouteEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.7
hwIpv6StaticRouteBfdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a BFD session to which IPv6 static routes are to be bound."
::= { hwIpv6StaticRouteEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.8
hwIpv6StaticRouteNqaAdminName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The admin name of a NQA to which IPv6 static routes are to be bound."
::= { hwIpv6StaticRouteEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.9
hwIpv6StaticRouteNqaTestName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The test name of a NQA to which IPv6 static routes are to be bound."
::= { hwIpv6StaticRouteEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.10
hwIpv6StaticRoutePrefer OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference of an IPv6 static route."
::= { hwIpv6StaticRouteEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.11
hwIpv6StaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tag of an IPv6 static route."
::= { hwIpv6StaticRouteEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.12
hwIpv6StaticRouteDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of an IPv6 static route."
::= { hwIpv6StaticRouteEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.13
hwIpv6StaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status."
::= { hwIpv6StaticRouteEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.145.1.5.1.14
hwIpv6StaticRoutePermanent OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
permanent(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the permanent-Advertising attribute of the static route:
Options:
1. none(0) -indicates that the permanent-Advertising attribute is not specified
2. permanent(1) -indicates that the permanent-Advertising attribute is specified"
::= { hwIpv6StaticRouteEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.145.1.6
hwRmInfo OBJECT IDENTIFIER ::= { hwRmExtObjects 6 }
-- 1.3.6.1.4.1.2011.5.25.145.1.6.1
hwIpv4PrefixNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IPv4 prefix."
::= { hwRmInfo 1 }
-- 1.3.6.1.4.1.2011.5.25.145.1.6.2
hwIpv6PrefixNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IPv6 prefix."
::= { hwRmInfo 2 }
-- 1.3.6.1.4.1.2011.5.25.145.2
hwRmExtConformance OBJECT IDENTIFIER ::= { hwRmExt 2 }
-- 1.3.6.1.4.1.2011.5.25.145.2.1
hwRmExtCompliances OBJECT IDENTIFIER ::= { hwRmExtConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.2.1.1
hwRmExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Route Management MIB."
MODULE -- this module
MANDATORY-GROUPS { hwStaticRouteGroup, hwRouteStatGroup, hwStaticRouteExtGroup, hwIpv6RouteStatGroup }
::= { hwRmExtCompliances 1 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2
hwRmExtGroups OBJECT IDENTIFIER ::= { hwRmExtConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.1
hwStaticRouteGroup OBJECT-GROUP
OBJECTS { hwStaticRouteBfdName, hwStaticRoutePrefer, hwStaticRouteDescrip, hwStaticRouteRowStatus }
STATUS current
DESCRIPTION
"Static routes table group."
::= { hwRmExtGroups 1 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.2
hwRouteStatGroup OBJECT-GROUP
OBJECTS { hwRouteStatTotal, hwRouteStatActive, hwRouteStatAdded, hwRouteStatDeleted, hwRouteStatFreed
}
STATUS current
DESCRIPTION
"Route statistic table group."
::= { hwRmExtGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.3
hwIpv6RouteStatGroup OBJECT-GROUP
OBJECTS { hwIpv6RouteStatTotal, hwIpv6RouteStatActive, hwIpv6RouteStatAdded, hwIpv6RouteStatDeleted, hwIpv6RouteStatFreed
}
STATUS current
DESCRIPTION
"Route statistic table group."
::= { hwRmExtGroups 3 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.4
hwStaticRouteExtGroup OBJECT-GROUP
OBJECTS { hwStaticRouteDestVpnNameExt, hwStaticRouteBfdNameExt, hwStaticRoutePreferExt, hwStaticRouteRowStatusExt, hwStaticRouteDescripExt,
hwStaticRoutePermanentExt, hwStaticRouteLdpSyncExt }
STATUS current
DESCRIPTION
"Static route table group."
::= { hwRmExtGroups 4 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.5
hwIpv6StaticRouteGroup OBJECT-GROUP
OBJECTS { hwIpv6StaticRouteDestVpnName, hwIpv6StaticRouteBfdName, hwIpv6StaticRoutePrefer, hwIpv6StaticRouteTag, hwIpv6StaticRouteRowStatus, hwIpv6StaticRoutePermanent,
hwIpv6StaticRouteNqaAdminName, hwIpv6StaticRouteNqaTestName, hwIpv6StaticRouteDescr }
STATUS current
DESCRIPTION
"IPv6 static route table group."
::= { hwRmExtGroups 5 }
-- 1.3.6.1.4.1.2011.5.25.145.2.2.6
hwRmInfoGroup OBJECT-GROUP
OBJECTS { hwIpv4PrefixNum, hwIpv6PrefixNum }
STATUS current
DESCRIPTION
"Route resource group."
::= { hwRmExtGroups 6 }
-- 1.3.6.1.4.1.2011.5.25.145.3
hwTunnelExtObjects OBJECT IDENTIFIER ::= { hwRmExt 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.1
hwTnl2L3vpnTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTnl2L3vpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel ID and L3VPN table of this entity."
::= { hwTunnelExtObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.1.1
hwTnl2L3vpnEntry OBJECT-TYPE
SYNTAX HwTnl2L3vpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel ID and L3VPN table of this entity."
INDEX { hwL3vpnTnlId, hwVpnIndex }
::= { hwTnl2L3vpnTable 1 }
HwTnl2L3vpnEntry ::=
SEQUENCE {
hwL3vpnTnlId
Unsigned32,
hwVpnIndex
Unsigned32,
hwVpnName
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.25.145.3.1.1.1
hwL3vpnTnlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID."
::= { hwTnl2L3vpnEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.1.1.2
hwVpnIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the VRF index of a VPN."
::= { hwTnl2L3vpnEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.1.1.3
hwVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VPN name."
::= { hwTnl2L3vpnEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2
hwTnl2VplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTnl2VplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and VPLS table of this entity."
::= { hwTunnelExtObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1
hwTnl2VplsEntry OBJECT-TYPE
SYNTAX HwTnl2VplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and VPLS table of this entity."
INDEX { hwVplsTnlId, hwVplsVcId }
::= { hwTnl2VplsTable 1 }
HwTnl2VplsEntry ::=
SEQUENCE {
hwVplsTnlId
Unsigned32,
hwVplsVcId
Unsigned32,
hwVsiIndex
Unsigned32,
hwVsiId
Unsigned32,
hwVsiName
OCTET STRING,
hwVplsVcType
Unsigned32,
hwVplsPeerIp
IpAddress
}
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.1
hwVplsTnlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID."
::= { hwTnl2VplsEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.2
hwVplsVcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the VC ID of a VPLS."
::= { hwTnl2VplsEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.3
hwVsiIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VSI index of a VPLS."
::= { hwTnl2VplsEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.4
hwVsiId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VSI ID of a VPLS."
::= { hwTnl2VplsEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.5
hwVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VSI name of a VPLS."
::= { hwTnl2VplsEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.6
hwVplsVcType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VC type of a VPLS."
::= { hwTnl2VplsEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.3.2.1.7
hwVplsPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the peer IP address of a VPLS."
::= { hwTnl2VplsEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3
hwTnl2Pwe3VllTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTnl2Pwe3VllEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and PWE3/VLL table of this entity."
::= { hwTunnelExtObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1
hwTnl2Pwe3VllEntry OBJECT-TYPE
SYNTAX HwTnl2Pwe3VllEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and PWE3/VLL table of this entity."
INDEX { hwPwVllTnlId, hwAcIndex }
::= { hwTnl2Pwe3VllTable 1 }
HwTnl2Pwe3VllEntry ::=
SEQUENCE {
hwPwVllTnlId
Unsigned32,
hwAcIndex
Unsigned32,
hwPwVllIfName
OCTET STRING,
hwMasterSlaveFlag
Unsigned32,
hwPwVllPeerIp
IpAddress,
hwPwVllVcId
Unsigned32,
hwPwVllSvcFlag
Unsigned32,
hwPwVcType
INTEGER,
hwSvcReceiveLabel
Unsigned32,
hwSvcTransmitLabel
Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.1
hwPwVllTnlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID."
::= { hwTnl2Pwe3VllEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.2
hwAcIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the AC index of a PWE3."
::= { hwTnl2Pwe3VllEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.3
hwPwVllIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the interface name of a PWE3."
::= { hwTnl2Pwe3VllEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.4
hwMasterSlaveFlag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the master and slave flags of a PWE3."
::= { hwTnl2Pwe3VllEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.5
hwPwVllPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the peer IP address of a PWE3."
::= { hwTnl2Pwe3VllEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.6
hwPwVllVcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the VC ID of a PWE3."
::= { hwTnl2Pwe3VllEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.7
hwPwVllSvcFlag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of a PWE3.
Static PWs (1)
Dynamic PWs (0)"
::= { hwTnl2Pwe3VllEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.8
hwPwVcType OBJECT-TYPE
SYNTAX INTEGER
{
frameRelayDlciMartini(1),
atmAal5SduVccTransport(2),
atmTransparentCellTransport(3),
vlan(4),
ethernet(5),
hdlc(6),
ppp(7),
cem(8),
atmN2OneVccCellTransport(9),
atmN2OneVpcCellTransport(10),
ipLayer2Transport(11),
atmOne2OneVccCellMode(12),
atmOne2OneVpcCellMode(13),
atmAal5PduVccTransport(14),
frameRelayPortMode(15),
cep(16),
saE1oP(17),
saT1oP(18),
saE3oP(19),
saT3oP(20),
cESoPsnBasicMode(21),
tDMoIPbasicMode(22),
l2VpnCESoPSNTDMwithCAS(23),
l2VpnTDMoIPTDMwithCAS(24),
frameRelayDlci(25),
ipInterworking(64),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies an indication of the L2Vpn's VC encapsulation type:
Options:
1: frameRelayDlciMartini(1) -indicates that the encapsulation type is Frame Relay DLCI(Martini Mode).
2: atmAal5SduVccTransport(2) -indicates that the encapsulation type is ATM AAL5 SDU VCC transport.
3: atmTransparentCellTransport(3) -indicates that the encapsulation type is ATM transparent cell transport.
4: vlan(4) -indicates that the encapsulation type is Vlan.
5: ethernet(5) -indicates that the encapsulation type is Ethernet.
6: hdlc(6) -indicates that the encapsulation type is HDLC.
7: ppp(7) -indicates that the encapsulation type is PPP.
8: cem(8) -indicates that the encapsulation type is SONET/SDH Circuit Emulation Service Over MPLS(CEM).
9: atmN2OneVccCellTransport(9) -indicates that the encapsulation type is ATM n-to-one VCC cell transport.
10: atmN2OneVpcCellTransport(10) -indicates that the encapsulation type is ATM n-to-one VPC cell transport.
11: ipLayer2Transport(11) -indicates that the encapsulation type is IP Layer2 Transport.
12: atmOne2OneVccCellMode(12) -indicates that the encapsulation type is ATM one-to-one VCC Cell Mode.
13: atmOne2OneVpcCellMode(13) -indicates that the encapsulation type is ATM one-to-one VPC Cell Mode.
14: atmAal5PduVccTransport(14) -indicates that the encapsulation type is ATM AAL5 PDU VCC transport.
15: frameRelayPortMode(15) -indicates that the encapsulation type is Frame-Relay Port mode.
16: cep(16) -indicates that the encapsulation type is SONET/SDH Circuit Emulation over Packet (CEP).
17: saE1oP(17) -indicates that the encapsulation type is Structure-agnostic E1 over Packet (SAE1oP).
18: saT1oP(18) -indicates that the encapsulation type is Structure-agnostic T1 (DS1) over Packet (SAT1oP).
19: saE3oP(19) -indicates that the encapsulation type is Structure-agnostic E3 over Packet (SAE3oP).
20: saT3oP(20) -indicates that the encapsulation type is Structure-agnostic T3 (DS3) over Packet (SAT3oP).
21: cESoPsnBasicMode(21) -indicates that the encapsulation type is CESoPSN basic mode.
22: tDMoIPbasicMode(22) -indicates that the encapsulation type is TDMoIP basic mode.
23: l2VpnCESoPSNTDMwithCAS(23) -indicates that the encapsulation type is CESoPSN TDM with CAS.
24: l2VpnTDMoIPTDMwithCAS(24) -indicates that the encapsulation type is TDMoIP TDM with CAS.
25: frameRelayDlci(25) -indicates that the encapsulation type is Frame Relay DLCI.
26: ipInterworking(64) -indicates that the encapsulation type is IP-interworking.
27: unknown(255) -indicates the unknown encapsulation type.
"
::= { hwTnl2Pwe3VllEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.9
hwSvcReceiveLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the inbound label."
::= { hwTnl2Pwe3VllEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.145.3.3.1.10
hwSvcTransmitLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the outbound label."
::= { hwTnl2Pwe3VllEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.145.3.4
hwTnlIf2TnlIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTnlIf2TnlIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel interface and tunnel ID table of this entity."
::= { hwTunnelExtObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.145.3.4.1
hwTnlIf2TnlIdEntry OBJECT-TYPE
SYNTAX HwTnlIf2TnlIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel interface and tunnel ID table of this entity."
INDEX { hwTunnelIf }
::= { hwTnlIf2TnlIdTable 1 }
HwTnlIf2TnlIdEntry ::=
SEQUENCE {
hwTunnelIf
OCTET STRING,
hwTunnelId
Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.145.3.4.1.1
hwTunnelIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel interface name."
::= { hwTnlIf2TnlIdEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.4.1.2
hwTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the tunnel ID."
::= { hwTnlIf2TnlIdEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.5
hwTnl2MultiHopPwe3Table OBJECT-TYPE
SYNTAX SEQUENCE OF HwTnl2MultiHopPwe3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel ID and Multi-hop PWE3 table of this entity."
::= { hwTunnelExtObjects 5 }
-- 1.3.6.1.4.1.2011.5.25.145.3.5.1
hwTnl2MultiHopPwe3Entry OBJECT-TYPE
SYNTAX HwTnl2MultiHopPwe3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the tunnel ID and Multi-hop PWE3 table of this entity."
INDEX { hwMultiHopPwe3TnlId, hwMultiHopPwe3VcType, hwMultiHopPwe3VcId }
::= { hwTnl2MultiHopPwe3Table 1 }
HwTnl2MultiHopPwe3Entry ::=
SEQUENCE {
hwMultiHopPwe3TnlId
Unsigned32,
hwMultiHopPwe3VcType
Unsigned32,
hwMultiHopPwe3VcId
Unsigned32,
hwMultiHopPwe3PeerIp
IpAddress
}
-- 1.3.6.1.4.1.2011.5.25.145.3.5.1.1
hwMultiHopPwe3TnlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the tunnel ID."
::= { hwTnl2MultiHopPwe3Entry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.3.5.1.2
hwMultiHopPwe3VcType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the VC type of a Multi-hop PWE3."
::= { hwTnl2MultiHopPwe3Entry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.3.5.1.3
hwMultiHopPwe3VcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the VC ID of a Multi-hop PWE3."
::= { hwTnl2MultiHopPwe3Entry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.3.5.1.4
hwMultiHopPwe3PeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the peer IP address of a Multi-hop PWE3."
::= { hwTnl2MultiHopPwe3Entry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.4
hwTunnelExtConformance OBJECT IDENTIFIER ::= { hwRmExt 4 }
-- 1.3.6.1.4.1.2011.5.25.145.4.1
hwTunnelExtCompliances OBJECT IDENTIFIER ::= { hwTunnelExtConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.4.1.1
hwTunnelExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The object indicates the compliance statement for route management MIB."
MODULE -- this module
MANDATORY-GROUPS { hwTnl2L3vpnGroup, hwTnl2VplsGroup, hwTnl2Pwe3VllGroup, hwTnlIf2TnlIdGroup, hwTnl2MultiHopPwe3Group
}
::= { hwTunnelExtCompliances 1 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2
hwTunnelExtGroups OBJECT IDENTIFIER ::= { hwTunnelExtConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2.1
hwTnl2L3vpnGroup OBJECT-GROUP
OBJECTS { hwVpnName }
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and L3VPN table group."
::= { hwTunnelExtGroups 1 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2.2
hwTnl2VplsGroup OBJECT-GROUP
OBJECTS { hwVsiIndex, hwVsiId, hwVsiName, hwVplsVcType, hwVplsPeerIp
}
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and VPLS table group."
::= { hwTunnelExtGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2.3
hwTnl2Pwe3VllGroup OBJECT-GROUP
OBJECTS { hwMasterSlaveFlag, hwPwVllIfName, hwPwVllVcId, hwPwVllSvcFlag, hwPwVcType,
hwSvcReceiveLabel, hwSvcTransmitLabel, hwPwVllPeerIp }
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and PWE3/VLL table group."
::= { hwTunnelExtGroups 3 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2.4
hwTnlIf2TnlIdGroup OBJECT-GROUP
OBJECTS { hwTunnelId }
STATUS current
DESCRIPTION
"The object indicates the tunnel interface name and tunnel ID table group."
::= { hwTunnelExtGroups 4 }
-- 1.3.6.1.4.1.2011.5.25.145.4.2.5
hwTnl2MultiHopPwe3Group OBJECT-GROUP
OBJECTS { hwMultiHopPwe3PeerIp }
STATUS current
DESCRIPTION
"The object indicates the tunnel ID and Multi-hop PWE3 table group."
::= { hwTunnelExtGroups 5 }
-- 1.3.6.1.4.1.2011.5.25.145.5
hwTnlGroupTrapObjects OBJECT IDENTIFIER ::= { hwRmExt 5 }
-- 1.3.6.1.4.1.2011.5.25.145.5.1
hwTnlDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The destination of the tunnel group."
::= { hwTnlGroupTrapObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.5.2
hwTnlPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..39))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Tunnel policy name."
::= { hwTnlGroupTrapObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.6
hwTnlGroupTraps OBJECT IDENTIFIER ::= { hwRmExt 6 }
-- 1.3.6.1.4.1.2011.5.25.145.6.1
hwTunnelGroupUp NOTIFICATION-TYPE
OBJECTS { hwTnlDestination, hwTnlPolicy }
STATUS current
DESCRIPTION
"The hwTunnelGroupUp alarm is reported when one or multiple tunnels in a tunnel group recover from a fault. "
::= { hwTnlGroupTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.6.2
hwTunnelGroupDown NOTIFICATION-TYPE
OBJECTS { hwTnlDestination, hwTnlPolicy }
STATUS current
DESCRIPTION
"The hwTunnelGroupDown alarm is generated if all tunnels in a tunnel group are faulty."
::= { hwTnlGroupTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.7
hwTnlGroupTrapConformance OBJECT IDENTIFIER ::= { hwRmExt 7 }
-- 1.3.6.1.4.1.2011.5.25.145.7.1
hwTnlGroupNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwTunnelGroupUp, hwTunnelGroupDown }
STATUS current
DESCRIPTION
"The object indicates the Up/Down state of the tunnel group."
::= { hwTnlGroupTrapConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.7.2
hwTnlGroupObjectGroup OBJECT-GROUP
OBJECTS { hwTnlDestination, hwTnlPolicy }
STATUS current
DESCRIPTION
"The object indicates the compliance statement for tunnel group trap."
::= { hwTnlGroupTrapConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.8
hwIpv4PrefixLimitTrapObjects OBJECT IDENTIFIER ::= { hwRmExt 8 }
-- 1.3.6.1.4.1.2011.5.25.145.8.1
hwCurIpv4PrefixNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the current number of IPv4 prefix."
::= { hwIpv4PrefixLimitTrapObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.8.2
hwIpv4PrefixLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the maximum number of IPv4 prefix can be added."
::= { hwIpv4PrefixLimitTrapObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.9
hwIpv6PrefixLimitTrapObjects OBJECT IDENTIFIER ::= { hwRmExt 9 }
-- 1.3.6.1.4.1.2011.5.25.145.9.1
hwCurIpv6PrefixNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the current number of IPv6 prefix."
::= { hwIpv6PrefixLimitTrapObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.9.2
hwIpv6PrefixLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the number of public-network IPv6 prefixes that are supported."
::= { hwIpv6PrefixLimitTrapObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.9.3
hwIpv6PrefixLimitVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the IPv6 VPN instance for prefix limit."
::= { hwIpv6PrefixLimitTrapObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.145.10
hwIpv4PrefixLimitTraps OBJECT IDENTIFIER ::= { hwRmExt 10 }
-- 1.3.6.1.4.1.2011.5.25.145.10.1
hwIpv4PrefixExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv4 route prefixes on the device exceeds the alarm threshold."
::= { hwIpv4PrefixLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.10.2
hwIpv4PrefixExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv4 route prefixes on the device falls below the alarm threshold."
::= { hwIpv4PrefixLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.10.3
hwIpv4PrefixThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv4 prefixes exceeded the threshold."
::= { hwIpv4PrefixLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.10.4
hwIpv4PrefixThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv4 prefixes falls below the threshold. "
::= { hwIpv4PrefixLimitTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.11
hwIpv6PrefixLimitTraps OBJECT IDENTIFIER ::= { hwRmExt 11 }
-- 1.3.6.1.4.1.2011.5.25.145.11.1
hwIpv6PrefixExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv6 route prefixes on the device exceeds the alarm threshold."
::= { hwIpv6PrefixLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.11.2
hwIpv6PrefixExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv6 route prefixes on the device falls below the alarm threshold."
::= { hwIpv6PrefixLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.11.3
hwIpv6PrefixThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv6 prefixes exceeded the threshold. "
::= { hwIpv6PrefixLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.11.4
hwIpv6PrefixThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The number of IPv6 prefixes falls below the threshold. "
::= { hwIpv6PrefixLimitTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.12
hwIpv4PrefixLimitConformance OBJECT IDENTIFIER ::= { hwRmExt 12 }
-- 1.3.6.1.4.1.2011.5.25.145.12.1
hwIpv4PrefixLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwIpv4PrefixExceed, hwIpv4PrefixExceedClear, hwIpv4PrefixThresholdExceed, hwIpv4PrefixThresholdExceedClear }
STATUS current
DESCRIPTION
"The object indicates alarm of ipv4 prefixs."
::= { hwIpv4PrefixLimitConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.12.2
hwIpv4PrefixLimitObjectGroup OBJECT-GROUP
OBJECTS { hwIpv4PrefixLimitValue, hwCurIpv4PrefixNum }
STATUS current
DESCRIPTION
"The object indicates the number of ipv4 prefixs."
::= { hwIpv4PrefixLimitConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.13
hwIpv6PrefixLimitConformance OBJECT IDENTIFIER ::= { hwRmExt 13 }
-- 1.3.6.1.4.1.2011.5.25.145.13.1
hwIpv6PrefixLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwIpv6PrefixExceed, hwIpv6PrefixExceedClear, hwIpv6PrefixThresholdExceed, hwIpv6PrefixThresholdExceedClear }
STATUS current
DESCRIPTION
"The object indicates alarm of ipv4 prefixs."
::= { hwIpv6PrefixLimitConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.13.2
hwIpv6PrefixLimitObjectGroup OBJECT-GROUP
OBJECTS { hwIpv6PrefixLimitValue, hwCurIpv6PrefixNum }
STATUS current
DESCRIPTION
"The object indicates the number of ipv6 prefixs."
::= { hwIpv6PrefixLimitConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.14
hwRmGresmTokenObjects OBJECT IDENTIFIER ::= { hwRmExt 14 }
-- 1.3.6.1.4.1.2011.5.25.145.14.1
hwGresmTokenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwGresmTokenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Gresm token table."
::= { hwRmGresmTokenObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.14.1.1
hwGresmTokenEntry OBJECT-TYPE
SYNTAX HwGresmTokenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Gresm token table."
INDEX { hwGresmTokenMode, entPhysicalIndex }
::= { hwGresmTokenTable 1 }
HwGresmTokenEntry ::=
SEQUENCE {
hwGresmTokenMode
INTEGER,
hwGresmTokenUsedNum
Integer32,
hwGresmTokenMaxValue
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.145.14.1.1.1
hwGresmTokenMode OBJECT-TYPE
SYNTAX INTEGER
{
global1(1),
global2(2),
global3(3),
global4(4),
perborad(5)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Specifies the aolloc mode of token.
Options:
1. global1(1) -indicates that the global table 1
2. global2(2) -indicates that the global table 2
3. global3(3) -indicates that the global table 3
4. global4(4) -indicates that the global table 4
5. perborad(5) -indicates that the per borad"
::= { hwGresmTokenEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.14.1.1.2
hwGresmTokenUsedNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the number of tokens used currently."
::= { hwGresmTokenEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.14.1.1.3
hwGresmTokenMaxValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the max value of Token"
::= { hwGresmTokenEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.15
hwGresmTokenTraps OBJECT IDENTIFIER ::= { hwRmExt 15 }
-- 1.3.6.1.4.1.2011.5.25.145.15.1
hwGresmTokenExceed NOTIFICATION-TYPE
OBJECTS { entPhysicalName, hwGresmTokenUsedNum, hwGresmTokenMaxValue }
STATUS current
DESCRIPTION
"The token count reaches the upper limit."
::= { hwGresmTokenTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.15.2
hwGresmTokenExceedClear NOTIFICATION-TYPE
OBJECTS { entPhysicalName, hwGresmTokenUsedNum, hwGresmTokenMaxValue }
STATUS current
DESCRIPTION
"The token count falls from the upper limit."
::= { hwGresmTokenTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.15.3
hwGresmTokenThresholdExceed NOTIFICATION-TYPE
OBJECTS { entPhysicalName, hwGresmTokenUsedNum, hwGresmTokenMaxValue }
STATUS current
DESCRIPTION
"The token usage exceeds the threshold."
::= { hwGresmTokenTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.15.4
hwGresmTokenThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { entPhysicalName, hwGresmTokenUsedNum, hwGresmTokenMaxValue }
STATUS current
DESCRIPTION
"The token usage falls from the threshold."
::= { hwGresmTokenTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.16
hwGresmTokenTrapConformance OBJECT IDENTIFIER ::= { hwRmExt 16 }
-- 1.3.6.1.4.1.2011.5.25.145.16.1
hwGresmTokenNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwGresmTokenExceed, hwGresmTokenExceedClear, hwGresmTokenThresholdExceed, hwGresmTokenThresholdExceedClear }
STATUS current
DESCRIPTION
"The object indicates alarm of Token."
::= { hwGresmTokenTrapConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.16.2
hwGresmTokenGroup OBJECT-GROUP
OBJECTS { hwGresmTokenMode, hwGresmTokenUsedNum, hwGresmTokenMaxValue }
STATUS current
DESCRIPTION
"A collection of objects for Token alarm."
::= { hwGresmTokenTrapConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.17
hwRmExtRouteObjects OBJECT IDENTIFIER ::= { hwRmExt 17 }
-- 1.3.6.1.4.1.2011.5.25.145.18
hwRmExtRouteTrapObjects OBJECT IDENTIFIER ::= { hwRmExt 18 }
-- 1.3.6.1.4.1.2011.5.25.145.19
hwRmExtRouteTraps OBJECT IDENTIFIER ::= { hwRmExt 19 }
-- 1.3.6.1.4.1.2011.5.25.145.19.1
hwPublicIpv4PrefixLimitTraps OBJECT IDENTIFIER ::= { hwRmExtRouteTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.19.1.1
hwPublicIpv4PrefixExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv4 prefixes has exceeded the maximum value."
::= { hwPublicIpv4PrefixLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.19.1.2
hwPublicIpv4PrefixExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv4 prefixes have resumed from exceeding the maximum vlaue."
::= { hwPublicIpv4PrefixLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.19.1.3
hwPublicIpv4PrefixThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv4 prefixes has exceeded the threshold."
::= { hwPublicIpv4PrefixLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.19.1.4
hwPublicIpv4PrefixThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv4 prefixes have resumed from exceeding the threshold. "
::= { hwPublicIpv4PrefixLimitTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.19.2
hwPublicIpv6PrefixLimitTraps OBJECT IDENTIFIER ::= { hwRmExtRouteTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.19.2.1
hwPublicIpv6PrefixExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv6 prefixes has exceeded the maximum vlaue."
::= { hwPublicIpv6PrefixLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.19.2.2
hwPublicIpv6PrefixExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv6 prefixes have resumed from exceeding the maximum vlaue."
::= { hwPublicIpv6PrefixLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.19.2.3
hwPublicIpv6PrefixThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv6 prefixes has exceeded the threshold. "
::= { hwPublicIpv6PrefixLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.19.2.4
hwPublicIpv6PrefixThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the public IPv6 prefixes have resumed from exceeding the threshold. "
::= { hwPublicIpv6PrefixLimitTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.19.3
hwL3vpnIpv6PrefixLimitTraps OBJECT IDENTIFIER ::= { hwRmExtRouteTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.19.3.1
hwL3vpnIpv6PrefixExceed NOTIFICATION-TYPE
OBJECTS { hwIpv6PrefixLimitVpnName, hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the vpn instance IPv6 prefixes has exceeded the maximum vlaue."
::= { hwL3vpnIpv6PrefixLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.19.3.2
hwL3vpnIpv6PrefixExceedClear NOTIFICATION-TYPE
OBJECTS { hwIpv6PrefixLimitVpnName, hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the vpn instance IPv6 prefixes have resumed from exceeding the maximum vlaue."
::= { hwL3vpnIpv6PrefixLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.19.3.3
hwL3vpnIpv6PrefixThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwIpv6PrefixLimitVpnName, hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the vpn instance IPv6 prefixes has exceeded the threshold. "
::= { hwL3vpnIpv6PrefixLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.20
hwRmExtRouteConformance OBJECT IDENTIFIER ::= { hwRmExt 20 }
-- 1.3.6.1.4.1.2011.5.25.145.20.1
hwRmExtRouteCompliances MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for HUAWEI-RM-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwPublicIpv4PrefixLimitNotificationGroup, hwPublicIpv4PrefixLimitObjectGroup, hwPublicIpv6PrefixLimitNotificationGroup, hwPublicIpv6PrefixLimitObjectGroup }
::= { hwRmExtRouteConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2
hwRmExtRouteGroup OBJECT IDENTIFIER ::= { hwRmExtRouteConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.1
hwPublicIpv4PrefixLimitGroup OBJECT IDENTIFIER ::= { hwRmExtRouteGroup 1 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.1.1
hwPublicIpv4PrefixLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwPublicIpv4PrefixExceed, hwPublicIpv4PrefixExceedClear, hwPublicIpv4PrefixThresholdExceed, hwPublicIpv4PrefixThresholdExceedClear }
STATUS current
DESCRIPTION
"The object indicates alarm of public ipv4 prefixs."
::= { hwPublicIpv4PrefixLimitGroup 1 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.1.2
hwPublicIpv4PrefixLimitObjectGroup OBJECT-GROUP
OBJECTS { hwCurIpv4PrefixNum, hwIpv4PrefixLimitValue }
STATUS current
DESCRIPTION
"The object indicates the number of ipv4 prefixs."
::= { hwPublicIpv4PrefixLimitGroup 2 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.2
hwPublicIpv6PrefixLimitGroup OBJECT IDENTIFIER ::= { hwRmExtRouteGroup 2 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.2.1
hwPublicIpv6PrefixLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwPublicIpv6PrefixExceed, hwPublicIpv6PrefixExceedClear, hwPublicIpv6PrefixThresholdExceed, hwPublicIpv6PrefixThresholdExceedClear }
STATUS current
DESCRIPTION
"The object indicates alarm of ipv6 prefixs."
::= { hwPublicIpv6PrefixLimitGroup 1 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.2.2
hwPublicIpv6PrefixLimitObjectGroup OBJECT-GROUP
OBJECTS { hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The object indicates the number of ipv6 prefixs."
::= { hwPublicIpv6PrefixLimitGroup 2 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.3
hwL3vpnIpv6PrefixLimitGroup OBJECT IDENTIFIER ::= { hwRmExtRouteGroup 3 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.3.1
hwL3vpnIpv6PrefixLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwL3vpnIpv6PrefixExceed, hwL3vpnIpv6PrefixExceedClear, hwL3vpnIpv6PrefixThresholdExceed }
STATUS current
DESCRIPTION
"The object indicates alarm of ipv6 VPN instance prefixs."
::= { hwL3vpnIpv6PrefixLimitGroup 1 }
-- 1.3.6.1.4.1.2011.5.25.145.20.2.3.2
hwL3vpnIpv6PrefixLimitObjectGroup OBJECT-GROUP
OBJECTS { hwIpv6PrefixLimitVpnName, hwCurIpv6PrefixNum, hwIpv6PrefixLimitValue }
STATUS current
DESCRIPTION
"The object indicates the number of ipv6 VPN instance prefixs."
::= { hwL3vpnIpv6PrefixLimitGroup 2 }
-- 1.3.6.1.4.1.2011.5.25.145.21
hwEvpnMacObjects OBJECT IDENTIFIER ::= { hwRmExt 21 }
-- 1.3.6.1.4.1.2011.5.25.145.21.1
hwMacLimitEvpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the EVPN instance for MAC limit."
::= { hwEvpnMacObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.21.2
hwCurMacNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the current number of MAC addresses of the EVPN instance."
::= { hwEvpnMacObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.21.3
hwEvpnMacUpperLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the upper limit value of MAC addresses of the EVPN instance."
::= { hwEvpnMacObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.145.21.4
hwEvpnMacLowerLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the lower limit value of MAC addresses of the EVPN instance."
::= { hwEvpnMacObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.145.21.5
hwEvpnMacLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the max value of MAC addresses of the EVPN instance."
::= { hwEvpnMacObjects 5 }
-- 1.3.6.1.4.1.2011.5.25.145.22
hwEvpnMacLimitTraps OBJECT IDENTIFIER ::= { hwRmExt 22 }
-- 1.3.6.1.4.1.2011.5.25.145.22.1
hwEvpnMacExceed NOTIFICATION-TYPE
OBJECTS { hwMacLimitEvpnName, hwCurMacNum, hwEvpnMacLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the number of MAC addresses of the EVPN instance has exceeded the maximum value."
::= { hwEvpnMacLimitTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.22.2
hwEvpnMacExceedClear NOTIFICATION-TYPE
OBJECTS { hwMacLimitEvpnName, hwCurMacNum, hwEvpnMacLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the maximum value."
::= { hwEvpnMacLimitTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.22.3
hwEvpnMacThresholdExceed NOTIFICATION-TYPE
OBJECTS { hwMacLimitEvpnName, hwCurMacNum, hwEvpnMacLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the number of MAC addresses of the EVPN instance has exceeded the threshold value."
::= { hwEvpnMacLimitTraps 3 }
-- 1.3.6.1.4.1.2011.5.25.145.22.3
hwEvpnMacThresholdExceedClear NOTIFICATION-TYPE
OBJECTS { hwMacLimitEvpnName, hwCurMacNum, hwEvpnMacLimitValue }
STATUS current
DESCRIPTION
"This object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the threshold value."
::= { hwEvpnMacLimitTraps 4 }
-- 1.3.6.1.4.1.2011.5.25.145.23
hwEvpnMacLimitConformance OBJECT IDENTIFIER ::= { hwRmExt 23 }
-- 1.3.6.1.4.1.2011.5.25.145.23.1
hwEvpnMacLimitNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwEvpnMacExceed, hwEvpnMacExceedClear, hwEvpnMacThresholdExceed, hwEvpnMacThresholdExceedClear}
STATUS current
DESCRIPTION
"The object indicates the alarm of MAC addresses of the EVPN instance."
::= { hwEvpnMacLimitConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.23.2
hwEvpnMacLimitObjectGroup OBJECT-GROUP
OBJECTS { hwMacLimitEvpnName, hwCurMacNum, hwEvpnMacUpperLimitValue, hwEvpnMacLowerLimitValue, hwEvpnMacLimitValue }
STATUS current
DESCRIPTION
"The object indicates the number of MAC addresses of the EVPN instance."
::= { hwEvpnMacLimitConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.24
hwNhmRestrainObjects OBJECT IDENTIFIER ::= { hwRmExt 24 }
-- 1.3.6.1.4.1.2011.5.25.145.24.1
hwNhmRestrainType OBJECT-TYPE
SYNTAX INTEGER
{
routerelay(1),
tunnelrelay(2),
ipv6routerelay(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the type of cyclic iteration that is suppressed."
::= { hwNhmRestrainObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.24.2
hwNhmRestrainKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the key of cyclic iteration that is suppressed."
::= { hwNhmRestrainObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.24.3
hwNhmRestrainVpnName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the VPN to which the iteration next hop belongs."
::= { hwNhmRestrainObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.145.24.4
hwNhmRestrainNextHop OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the iteration next hop."
::= { hwNhmRestrainObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.145.25
hwNhmRestrainTraps OBJECT IDENTIFIER ::= { hwRmExt 25 }
-- 1.3.6.1.4.1.2011.5.25.145.25.1
hwNhmRestrain NOTIFICATION-TYPE
OBJECTS { hwNhmRestrainType, hwNhmRestrainKey, hwNhmRestrainVpnName, hwNhmRestrainNextHop }
STATUS current
DESCRIPTION
"This object indicates that cyclic iteration is suppressed."
::= { hwNhmRestrainTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.25.2
hwNhmRestrainClear NOTIFICATION-TYPE
OBJECTS { hwNhmRestrainType, hwNhmRestrainKey }
STATUS current
DESCRIPTION
"This object indicates that cyclic iteration suppression is removed."
::= { hwNhmRestrainTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.145.26
hwNhmRestrainTrapConformance OBJECT IDENTIFIER ::= { hwRmExt 26 }
-- 1.3.6.1.4.1.2011.5.25.145.26.1
hwNhmRestrainNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwNhmRestrain, hwNhmRestrainClear }
STATUS current
DESCRIPTION
"This object indicates the content of the cyclic iteration that is suppressed."
::= { hwNhmRestrainTrapConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.26.2
hwNhmRestrainObjectGroup OBJECT-GROUP
OBJECTS { hwNhmRestrainType, hwNhmRestrainKey, hwNhmRestrainVpnName, hwNhmRestrainNextHop }
STATUS current
DESCRIPTION
"This object represents iterative information suppressed the content."
::= { hwNhmRestrainTrapConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.27
hwVlinkImportObjects OBJECT IDENTIFIER ::= { hwRmExt 27 }
-- 1.3.6.1.4.1.2011.5.25.145.27.1
hwVlinkImportCurNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the current number of import vlink route number."
::= { hwVlinkImportObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.145.27.2
hwVlinkImportMaxNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the upper limit value of import vlink route number."
::= { hwVlinkImportObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.145.28
hwVlinkTraps OBJECT IDENTIFIER ::= { hwRmExt 28 }
-- 1.3.6.1.4.1.2011.5.25.145.28.1
hwVlinkImportExceed NOTIFICATION-TYPE
OBJECTS { hwVlinkImportCurNumber, hwVlinkImportMaxNumber }
STATUS current
DESCRIPTION
"This object indicates that the number of import vlink items exceeded the maximum number."
::= { hwVlinkTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.145.29
hwVlinkImportConformance OBJECT IDENTIFIER ::= { hwRmExt 29 }
-- 1.3.6.1.4.1.2011.5.25.145.29.1
hwVlinkImportNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwVlinkImportExceed }
STATUS current
DESCRIPTION
"The object indicates the alarm of import vlink route."
::= { hwVlinkImportConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.145.29.2
hwVlinkImportObjectGroup OBJECT-GROUP
OBJECTS { hwVlinkImportCurNumber, hwVlinkImportMaxNumber }
STATUS current
DESCRIPTION
"The object indicates the number of import vlink route."
::= { hwVlinkImportConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.145.30
-- hwFibStatisticObject
hwFibStatisticObject OBJECT IDENTIFIER ::= { hwRmExt 30 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1
-- hwFibStatisticsTable
hwFibStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFibStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that contains fib statistics information."
::= { hwFibStatisticObject 1 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1
hwFibStatisticsEntry OBJECT-TYPE
SYNTAX HwFibStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for fib flow statistics information."
INDEX { hwFibSlot}
::= { hwFibStatisticsTable 1 }
HwFibStatisticsEntry ::=
SEQUENCE {
hwFibSlot
Unsigned32,
hwIPv4FibNum
Unsigned32,
hwIPv4FibUsage
Unsigned32,
hwIPv6FibNum
Unsigned32,
hwIPv6FibUsage
Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1.1
hwFibSlot OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot index."
::= { hwFibStatisticsEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1.2
hwIPv4FibNum OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 fib number."
::= { hwFibStatisticsEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1.3
hwIPv4FibUsage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 fib utilization percentage."
::= { hwFibStatisticsEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1.4
hwIPv6FibNum OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 fib number."
::= { hwFibStatisticsEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.145.30.1.1.5
hwIPv6FibUsage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 fib utilization percentage."
::= { hwFibStatisticsEntry 5 }
END