mibs/MIBS/huawei/HUAWEI-RPR-MIB

440 lines
18 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI RPR extend MIB
-- Reference:
-- Version: V1.0
-- History:
-- ==================================================================
HUAWEI-RPR-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
rprIfIndex, rprIfWrapConfig, rprIfRingOperModes, rprIfCurrentStatus, rprSpanIfIndex,
rprSpanId, rprSpanTotalRingletReservedRate, rprTopoImageIfIndex, rprTopoImageMacAddress, rprTopoImageStationIfIndex,
rprTopoImageRinglet0Hops, rprTopoImageRinglet1Hops, rprTopoImageWestProtectionStatus, rprTopoImageEastProtectionStatus, rprTopoImageStatus,
RprSpan
FROM IEEE-802DOT17-RPR-MIB
ifIndex, ifPhysAddress, ifName, InterfaceIndex
FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI;
hwRPR MODULE-IDENTITY
LAST-UPDATED "200601090000Z" -- January 09, 2006 at 00:00 GMT
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
" R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"The HUAWEI-RPR-TRAP-MIB contains objects to
Monitor the RPR TRAPs.
*********************************
RPR TRAP
**********************************
This RPR TRAP consists of the following TRAPs:
1 : hwRPRexcessReservedRateDefect
2 : hwRPRprotMisconfigDefect
3 : hwRPRtopoChange
4 : hwRPRtopoInvalidDefect
5 : hwRPRduplicateMacAddressDefect
6 : hwRPRtopoInstabilityDefect
7 : hwRPRtopoStabilityRestore
8 : hwRPRPhyIfEventTrap
9 : hwRPRLogicIfEventTrap
"
::= { hwDatacomm 36 }
--
-- Node definitions
--
hwRPRObjects OBJECT IDENTIFIER ::= { hwRPR 1 }
hwRPRIfEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRPRIfEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface event information."
::= { hwRPRObjects 1 }
hwRPRIfEventEntry OBJECT-TYPE
SYNTAX HwRPRIfEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface event information Entry."
INDEX { hwRPRLogicIfIndex, hwRPRLogicIfSpanId }
::= { hwRPRIfEventTable 1 }
HwRPRIfEventEntry ::=
SEQUENCE {
hwRPRLogicIfIndex
InterfaceIndex,
hwRPRLogicIfSpanId
RprSpan,
hwRPRLogicIfEvent
INTEGER,
hwRPRPhyIfEvent
INTEGER
}
hwRPRLogicIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The ifIndex of this RPR logic interface."
::= { hwRPRIfEventEntry 1 }
hwRPRLogicIfSpanId OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The SpanId of this RPR logic interface."
::= { hwRPRIfEventEntry 2 }
hwRPRLogicIfEvent OBJECT-TYPE
SYNTAX INTEGER
{
sd(1),
sf(2),
mateerr(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Type of logic interface event.
SD indicates that SDH Signal of the RPR logic interface degrades;
SF indicates that SDH Signal of the RPR logic interface fails;
MATEERR indicates that mate cable error caused by mate cable of
the RPR physical interface is linked incorrect;
"
::= { hwRPRIfEventEntry 3 }
hwRPRPhyIfEvent OBJECT-TYPE
SYNTAX INTEGER
{
sdHFramerSDst(1),
sdHFramerSFst(2),
sdHFramerLOSst(3),
sdHFramerLOFst(4),
sdHFramerRDIst(5),
sdHFramerAISst(6),
sdHFramerREIst(7),
miscabling(8),
keepalive(9),
mateState(10)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Type of physical interface event.
SDHFramerSDst indicates that SDH Signal of the RPR physical interface degrades;
SDHFramerSFst indicates that SDH Signal of the RPR physical interface fails;
SDHFramerLOSst indicates that SDH Signal of the RPR physical interface loses;
SDHFramerLOFst indicates that SDH framer of the RPR physical interface loses;
SDHFramerRDIst indicates that remote Defect Indication ;
SDHFramerAISst indicates that alarm Indication Signal;
SDHFramerREIst indicates that remote ErrorIndication;
Miscabling indicates that cable of the RPR physical interface is linked incorrect;
Keepalive indicates that an exchange of messages allowing verification
that communication between stations is not active;
MateState indicates that mate cable of the RPR physical interface is linked incorrect.
"
::= { hwRPRIfEventEntry 4 }
hwRPRIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRPRIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of RPR logic interface configuration information."
::= { hwRPRObjects 2 }
hwRPRIfConfigEntry OBJECT-TYPE
SYNTAX HwRPRIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RPR interface Configuration entry."
INDEX { hwRPRIfConfigIfIndex }
::= { hwRPRIfConfigTable 1 }
HwRPRIfConfigEntry ::=
SEQUENCE {
hwRPRIfConfigIfIndex InterfaceIndex,
hwRPRLogicIfTotalBandWidth INTEGER
}
hwRPRIfConfigIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR logic interface."
::= { hwRPRIfConfigEntry 1 }
hwRPRLogicIfTotalBandWidth OBJECT-TYPE
SYNTAX INTEGER
{
bandwidth1000(1000),
bandwidth2488(2488),
bandwidth10000(10000)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The total bandwidth of this RPR logic interface."
::= { hwRPRIfConfigEntry 2 }
hwRPRTraps OBJECT IDENTIFIER ::= { hwRPR 2 }
hwRPRexcessReservedRateDefect NOTIFICATION-TYPE
OBJECTS { rprSpanTotalRingletReservedRate }
STATUS current
DESCRIPTION
"This defect indicates that the amount of reserved
bandwidth on a ringlet exceeds the available LINK_RATE.
When an excess reserved rate defect is present,
a notification may be generated.
"
::= { hwRPRTraps 1 }
hwRPRprotMisconfigDefect NOTIFICATION-TYPE
OBJECTS { rprIfWrapConfig, rprIfRingOperModes }
STATUS current
DESCRIPTION
"A critical severity defect that indicates the presence
of mismatched-protection-configuration stations, based
on the value returned by MismatchedProtection().
When a protection configuration defect is present
on the station, a notification may be generated.
"
::= { hwRPRTraps 2 }
hwRPRtopoChange NOTIFICATION-TYPE
OBJECTS { rprTopoImageStationIfIndex, rprTopoImageStatus, rprTopoImageWestProtectionStatus, rprTopoImageEastProtectionStatus, rprIfCurrentStatus
}
STATUS current
DESCRIPTION
"When an topology change is present,
a notification may be generated..
"
::= { hwRPRTraps 3 }
hwRPRtopoInvalidDefect NOTIFICATION-TYPE
OBJECTS { ifPhysAddress, rprIfCurrentStatus }
STATUS current
DESCRIPTION
"A critical severity defect indicating that an
invalid entry has been found within the scope
of the topology,the stations on the ring excess
the MAX_STATIONS or the local station has one
or more duplicate secondary MAC addresses. When
a topology entry invalid defect ,exceeing MaxStations
or duplicate secondary MAC addresses is present,
a notification may be generated.
"
::= { hwRPRTraps 4 }
hwRPRduplicateMacAddressDefect NOTIFICATION-TYPE
OBJECTS { ifPhysAddress, rprTopoImageRinglet0Hops, rprTopoImageRinglet1Hops }
STATUS current
DESCRIPTION
"A critical severity defect indicating that a
duplicateMacAddress has been found on the ring.
When a duplicateMacAddress defect is present,
a notification may be generated.
"
::= { hwRPRTraps 5 }
hwRPRtopoInstabilityDefect NOTIFICATION-TYPE
OBJECTS { ifPhysAddress }
STATUS current
DESCRIPTION
"The critical severity Instable topology defect.
When an Instable topology defect is present,
a notification may be generated.
"
::= { hwRPRTraps 6 }
hwRPRtopoStabilityRestore NOTIFICATION-TYPE
OBJECTS { ifPhysAddress }
STATUS current
DESCRIPTION
"The critical severity Instable topology restore.
When an stable topology is present,
a notification may be generated.
"
::= { hwRPRTraps 7 }
hwRPRPhyIfEventTrap NOTIFICATION-TYPE
OBJECTS { hwRPRLogicIfIndex, hwRPRLogicIfSpanId, hwRPRPhyIfEvent }
STATUS current
DESCRIPTION
"The critical severity physical interface defect.
When an physical interface defect is present,
a notification may be generated.
"
::= { hwRPRTraps 8 }
hwRPRLogicIfEventTrap NOTIFICATION-TYPE
OBJECTS { hwRPRLogicIfIndex, hwRPRLogicIfSpanId, hwRPRLogicIfEvent }
STATUS current
DESCRIPTION
"The critical severity Logic interface defect.
When an logic interface defect that caused
by physical interface event is present,
a notification may be generated.
"
::= { hwRPRTraps 9 }
hwRPRNodeConErr NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"On RPR ring, to detect the connection, a kind of packet
is send between neighbor RPR nodes, This kind of packet
is SC(Single-Choke) packet, If a node cannot receive SC
packet from neighbor node in KEEPALIVE time, then there
is failure between the two nodes. When happened, auto protection
is executed by software.!"
::= { hwRPRTraps 10 }
hwRPRNodeConErrResume NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"On RPR ring, to detect the connection, a kind of packet
is send between neighbor RPR nodes, This kind of packet
is SC(Single-Choke) packet, If a node cannot receive SC
packet from neighbor node in KEEPALIVE time, then there
is failure between the two nodes. When failure is resumed
, this notification is sent.!"
::= { hwRPRTraps 11 }
hwRPRNodeMisCabling NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"Optical fiber is connected in error. i.e the east direction
of one node is connected with east direction of another node,
or the west direction of one node is connected with west direction
of another node!"
::= { hwRPRTraps 12 }
hwRPRNodeMisCablingResume NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"when phenomena that Optical fiber is connected in error disappears,
this notification is sent!"
::= { hwRPRTraps 13 }
hwRPRMateErr NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"In double RPR operating mode, east and west directions
of one rpr node lay on two RPR cards, These two cards are
internally conntected by Gigaibit-ethernet, which is called
MATE interface. The RPR nodes cannot work normaly under
condition of MATE error.!"
::= { hwRPRTraps 14 }
hwRPRMateErrResume NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"In double RPR operating mode, east and west directions
of one rpr node lay on two RPR cards, These two cards are
internally conntected by Gigaibit-ethernet, which is called
MATE interface. The RPR nodes cannot work normaly under
condition of MATE error.when MATE error is resumed ,this
notification is sent!"
::= { hwRPRTraps 15 }
hwRPRLOS NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"On RPR physical layer, link connection is detected
through physical singal. When can't receive physical
singal, then local node from neighbor node, LOS(lost of signal)
alarm is report, auto protection is executed by software.!"
::= { hwRPRTraps 16 }
hwRPRLOSResume NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"On RPR physical layer, link connection is detected
through physical singal. When can't receive physical
singal, then local node from neighbor node, LOS(lost of signal)
alarm is report, auto protection is executed by software.when LOS
is resumed,this notification is sent"
::= { hwRPRTraps 17 }
hwRPRTrapConformance OBJECT IDENTIFIER ::= { hwRPR 3 }
hwRPRTrapCompliances OBJECT IDENTIFIER ::= { hwRPRTrapConformance 1 }
hwRPRTrapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
RPRTRAP on a router.
"
MODULE -- this module
MANDATORY-GROUPS { hwRPRIfEventGroup, hwRPRTrapGroup }
::= { hwRPRTrapCompliances 1 }
hwRPRTrapGroups OBJECT IDENTIFIER ::= { hwRPRTrapConformance 2 }
hwRPRIfEventGroup OBJECT-GROUP
OBJECTS { hwRPRLogicIfIndex, hwRPRLogicIfSpanId, hwRPRPhyIfEvent, hwRPRLogicIfEvent }
STATUS current
DESCRIPTION
"provide RPRTRAP objects configuration information. "
::= { hwRPRTrapGroups 1 }
hwRPRTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwRPRexcessReservedRateDefect, hwRPRprotMisconfigDefect, hwRPRtopoChange, hwRPRtopoInvalidDefect, hwRPRduplicateMacAddressDefect,
hwRPRtopoInstabilityDefect, hwRPRtopoStabilityRestore, hwRPRPhyIfEventTrap, hwRPRLogicIfEventTrap, hwRPRNodeConErr,
hwRPRNodeConErrResume, hwRPRNodeMisCabling, hwRPRNodeMisCablingResume, hwRPRMateErr, hwRPRMateErrResume,
hwRPRLOS, hwRPRLOSResume }
STATUS current
DESCRIPTION
"Required objects to provide RPRTRAP objects configuration
information. "
::= { hwRPRTrapGroups 2 }
hwRPRIfConfigGroup OBJECT-GROUP
OBJECTS { hwRPRLogicIfTotalBandWidth }
STATUS current
DESCRIPTION
"Description."
::= { hwRPRTrapGroups 3 }
END
--
-- HUAWEI-RPR-MIB.mib
--