david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/huawei/HUAWEI-RSVPTE-MIB

3269 lines
156 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- =================================================================
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description the HUAWEI-RSVPTE-MIB provides information about RSVPTE.
-- Reference:
-- Version: V1.0
-- History:
-- zhuguangdong 2007-04-16 publish
-- =================================================================
--
HUAWEI-RSVPTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
ifIndex
FROM IF-MIB
SessionType, BitRate, BurstSize, MessageSize, QosService
FROM INTEGRATED-SERVICES-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
IpAddress, Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TruthValue, TimeStamp, RowStatus, TimeInterval
FROM SNMPv2-TC;
-- Thu Apri 16 15:03:53 PDT 2007
hwRsvpTe MODULE-IDENTITY
LAST-UPDATED "200704101000Z" -- April 10, 2007 at 10:00 GMT
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com
"
DESCRIPTION
"The MIB module to describe the RSVP Protocol"
::= { hwDatacomm 148 }
--
-- Node definitions
--
hwRsvpTeObjects OBJECT IDENTIFIER ::= { hwRsvpTe 1 }
-- The RSVP Session Statistics Database displays statistics
-- relating to the number of senders and receivers in each
-- session.
hwRsvpTeSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of all sessions seen by a given sys-
tem."
::= { hwRsvpTeObjects 1 }
hwRsvpTeSessionEntry OBJECT-TYPE
SYNTAX HwRsvpTeSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single session seen by a given system."
INDEX { hwRsvpTeSessionNumber }
::= { hwRsvpTeSessionTable 1 }
HwRsvpTeSessionEntry ::=
SEQUENCE {
hwRsvpTeSessionNumber
Gauge32,
hwRsvpTeSessionType
SessionType,
hwRsvpTeSessionDestAddr
OCTET STRING,
hwRsvpTeSessionDestAddrLength
Integer32,
hwRsvpTeSessionSenders
Gauge32,
hwRsvpTeSessionReceivers
Gauge32,
hwRsvpTeSessionRequests
Gauge32,
hwRsvpTeSessionTunnelId
Integer32,
hwRsvpTeSessionTunnelExtId
IpAddress,
hwRsvpTeSessionLspsNumber
Gauge32,
hwRsvpTeSessionStyle
INTEGER
}
hwRsvpTeSessionNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this session. This is for SNMP
Indexing purposes only and has no relation to
any protocol value."
::= { hwRsvpTeSessionEntry 1 }
hwRsvpTeSessionType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { hwRsvpTeSessionEntry 2 }
hwRsvpTeSessionDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session."
::= { hwRsvpTeSessionEntry 3 }
hwRsvpTeSessionDestAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CIDR prefix length of the session address,
which is 32 for IP4 host and multicast ad-
dresses, and 128 for IP6 addresses."
::= { hwRsvpTeSessionEntry 4 }
hwRsvpTeSessionSenders OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of distinct senders currently known
to be part of this session."
::= { hwRsvpTeSessionEntry 5 }
hwRsvpTeSessionReceivers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reservations being requested of
this system for this session."
::= { hwRsvpTeSessionEntry 6 }
hwRsvpTeSessionRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reservation requests this system
is sending upstream for this session."
::= { hwRsvpTeSessionEntry 7 }
hwRsvpTeSessionTunnelId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 16-bit identifier used in the SESSION that remains
constant over the life of the tunnel."
::= { hwRsvpTeSessionEntry 8 }
hwRsvpTeSessionTunnelExtId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identifier used in the SESSION that remains
constant over the life of the tunnel. Normally
the identifier is set to all zeros. Ingress nodes
that wish to narrow the scope of a SESSION to the
ingress-egress pair may place their IPv4 address
here as a globally unique identifier. "
::= { hwRsvpTeSessionEntry 9 }
hwRsvpTeSessionLspsNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LSPs that belong to this session."
::= { hwRsvpTeSessionEntry 10 }
hwRsvpTeSessionStyle OBJECT-TYPE
SYNTAX INTEGER
{
ff(10),
wf(17),
se(18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerable value to identify the treatment of
reservations for different senders within the
same session: WF 10001b, FF01010b, SE 10010b."
::= { hwRsvpTeSessionEntry 11 }
hwRsvpTeSenderTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeSenderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed by senders in PATH messages."
::= { hwRsvpTeObjects 2 }
hwRsvpTeSenderEntry OBJECT-TYPE
SYNTAX HwRsvpTeSenderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed by a single sender's PATH message."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber }
::= { hwRsvpTeSenderTable 1 }
HwRsvpTeSenderEntry ::=
SEQUENCE {
hwRsvpTeSenderNumber
Gauge32,
hwRsvpTeSenderType
SessionType,
hwRsvpTeSenderDestAddr
OCTET STRING,
hwRsvpTeSenderAddr
OCTET STRING,
hwRsvpTeSenderDestAddrLength
Integer32,
hwRsvpTeSenderAddrLength
Integer32,
hwRsvpTeSenderHopAddr
OCTET STRING,
hwRsvpTeSenderHopLih
Integer32,
hwRsvpTeSenderInterface
Integer32,
hwRsvpTeSenderTSpecRate
BitRate,
hwRsvpTeSenderTSpecPeakRate
BitRate,
hwRsvpTeSenderTSpecBurst
BurstSize,
hwRsvpTeSenderTSpecMinTu
MessageSize,
hwRsvpTeSenderTSpecMaxTu
MessageSize,
hwRsvpTeSenderInterval
Integer32,
hwRsvpTeSenderRsvpHop
TruthValue,
hwRsvpTeSenderPolicy
OCTET STRING,
hwRsvpTeSenderAdspecBreak
TruthValue,
hwRsvpTeSenderAdspecHopCount
Integer32,
hwRsvpTeSenderAdspecPathBw
BitRate,
hwRsvpTeSenderAdspecMinLatency
Integer32,
hwRsvpTeSenderAdspecMtu
Integer32,
hwRsvpTeSenderAdspecGuaranteedSvc
TruthValue,
hwRsvpTeSenderAdspecGuaranteedBreak
TruthValue,
hwRsvpTeSenderAdspecGuaranteedCtot
Integer32,
hwRsvpTeSenderAdspecGuaranteedDtot
Integer32,
hwRsvpTeSenderAdspecGuaranteedCsum
Integer32,
hwRsvpTeSenderAdspecGuaranteedDsum
Integer32,
hwRsvpTeSenderAdspecGuaranteedHopCount
Integer32,
hwRsvpTeSenderAdspecGuaranteedPathBw
BitRate,
hwRsvpTeSenderAdspecGuaranteedMinLatency
Integer32,
hwRsvpTeSenderAdspecGuaranteedMtu
Integer32,
hwRsvpTeSenderAdspecCtrlLoadSvc
TruthValue,
hwRsvpTeSenderAdspecCtrlLoadBreak
TruthValue,
hwRsvpTeSenderAdspecCtrlLoadHopCount
Integer32,
hwRsvpTeSenderAdspecCtrlLoadPathBw
BitRate,
hwRsvpTeSenderAdspecCtrlLoadMinLatency
Integer32,
hwRsvpTeSenderAdspecCtrlLoadMtu
Integer32,
hwRsvpTeSenderTtl
Integer32,
hwRsvpTeLspId
Integer32,
hwRsvpTeSenderMsgIdSndFlag
Integer32,
hwRsvpTeSenderMsgIdSndEpoch
Gauge32,
hwRsvpTeSenderMsgIdSndNumber
Gauge32,
hwRsvpTeSenderMsgIdRcvFlag
Integer32,
hwRsvpTeSenderMsgIdRcvEpoch
Gauge32,
hwRsvpTeSenderMsgIdRcvNumber
Gauge32,
hwRsvpTeSenderClassType
Integer32,
hwRsvpTeSenderLabelRequestCtype
INTEGER,
hwRsvpTeSenderLabelRequestL3pid
Integer32,
hwRsvpTeSenderLabelRequestAtmMinVpi
Integer32,
hwRsvpTeSenderLabelRequestAtmMinVci
Integer32,
hwRsvpTeSenderLabelRequestAtmMaxVpi
Integer32,
hwRsvpTeSenderLabelRequestAtmMaxVci
Integer32,
hwRsvpTeSenderLabelRequestFrMinDlci
Integer32,
hwRsvpTeSenderLabelRequestFrMaxDlci
Integer32,
hwRsvpTeSenderSessionAttrType
INTEGER,
hwRsvpTeSenderSessionAttrSetupPrio
Integer32,
hwRsvpTeSenderSessionAttrHoldPrio
Integer32,
hwRsvpTeSenderSessionAttrFlag
Integer32,
hwRsvpTeSenderSessionAttrName
OCTET STRING,
hwRsvpTeSenderSessionAttrExcludeAny
Gauge32,
hwRsvpTeSenderSessionAttrIncludeAny
Gauge32,
hwRsvpTeSenderSessionAttrIncludeAll
Gauge32,
hwRsvpTeSenderFrrSetupPrio
Integer32,
hwRsvpTeSenderFrrHoldPrio
Integer32,
hwRsvpTeSenderFrrHopLimit
Integer32,
hwRsvpTeSenderFrrFlag
INTEGER,
hwRsvpTeSenderFrrBandwidth
BitRate,
hwRsvpTeSenderFrrExcludeAny
Gauge32,
hwRsvpTeSenderFrrIncludeAny
Gauge32,
hwRsvpTeSenderFrrIncludeAll
Gauge32,
hwRsvpTeSenderFrrInuseFlag
INTEGER,
hwRsvpTeSenderDiffServPsc
Integer32
}
hwRsvpTeSenderNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this sender. This is for SNMP
Indexing purposes only and has no relation to
any protocol value."
::= { hwRsvpTeSenderEntry 1 }
hwRsvpTeSenderType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { hwRsvpTeSenderEntry 2 }
hwRsvpTeSenderDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session."
::= { hwRsvpTeSenderEntry 3 }
hwRsvpTeSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address used by this sender in this
session."
::= { hwRsvpTeSenderEntry 4 }
hwRsvpTeSenderDestAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeSenderEntry 5 }
hwRsvpTeSenderAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeSenderEntry 6 }
hwRsvpTeSenderHopAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address used by the previous RSVP hop
(which may be the original sender)."
::= { hwRsvpTeSenderEntry 7 }
hwRsvpTeSenderHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Logical Interface Handle used by the pre-
vious RSVP hop (which may be the original
sender)."
::= { hwRsvpTeSenderEntry 8 }
hwRsvpTeSenderInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which
this PATH message was most recently received."
::= { hwRsvpTeSenderEntry 9 }
hwRsvpTeSenderTSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeSenderTSpec-
PeakRate (if supported by the service model);
however, averaged across two or more burst in-
tervals, the rate should not exceed hwRsvpTeSen-
derTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower."
::= { hwRsvpTeSenderEntry 10 }
hwRsvpTeSenderTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Bit Rate of the sender's data stream.
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 11 }
hwRsvpTeSenderTSpecBurst OBJECT-TYPE
SYNTAX BurstSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest burst expected from
the sender at a time."
::= { hwRsvpTeSenderEntry 12 }
hwRsvpTeSenderTSpecMinTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size."
::= { hwRsvpTeSenderEntry 13 }
hwRsvpTeSenderTSpecMaxTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU."
::= { hwRsvpTeSenderEntry 14 }
hwRsvpTeSenderInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between refresh messages as ad-
vertised by the previous hop."
::= { hwRsvpTeSenderEntry 15 }
hwRsvpTeSenderRsvpHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the node believes that the previous
IP hop is an RSVP hop. If FALSE, the node be-
lieves that the previous IP hop may not be an
RSVP hop."
::= { hwRsvpTeSenderEntry 16 }
hwRsvpTeSenderPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..65532))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { hwRsvpTeSenderEntry 17 }
hwRsvpTeSenderAdspecBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global break bit general characterization
parameter from the ADSPEC. If TRUE, at least
one non-IS hop was detected in the path. If
FALSE, no non-IS hops were detected."
::= { hwRsvpTeSenderEntry 18 }
hwRsvpTeSenderAdspecHopCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hop count general characterization parame-
ter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present"
::= { hwRsvpTeSenderEntry 19 }
hwRsvpTeSenderAdspecPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path bandwidth estimate general character-
ization parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present"
::= { hwRsvpTeSenderEntry 20 }
hwRsvpTeSenderAdspecMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum path latency general characteriza-
tion parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present"
::= { hwRsvpTeSenderEntry 21 }
hwRsvpTeSenderAdspecMtu OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The composed Maximum Transmission Unit general
characterization parameter from the ADSPEC. A
return of zero or noSuchValue indicates one of
the following conditions:
the invalid bit was set
the parameter was not present"
::= { hwRsvpTeSenderEntry 22 }
hwRsvpTeSenderAdspecGuaranteedSvc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the ADSPEC contains a Guaranteed Ser-
vice fragment. If FALSE, the ADSPEC does not
contain a Guaranteed Service fragment."
::= { hwRsvpTeSenderEntry 23 }
hwRsvpTeSenderAdspecGuaranteedBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the Guaranteed Service fragment has
its 'break' bit set, indicating that one or
more nodes along the path do not support the
guaranteed service. If FALSE, and hwRsvpTe-
SenderAdspecGuaranteedSvc is TRUE, the 'break'
bit is not set.
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE,
this returns FALSE or noSuchValue."
::= { hwRsvpTeSenderEntry 24 }
hwRsvpTeSenderAdspecGuaranteedCtot OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'C' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 25 }
hwRsvpTeSenderAdspecGuaranteedDtot OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'D' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 26 }
hwRsvpTeSenderAdspecGuaranteedCsum OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'C' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 27 }
hwRsvpTeSenderAdspecGuaranteedDsum OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'D' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 28 }
hwRsvpTeSenderAdspecGuaranteedHopCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 29 }
hwRsvpTeSenderAdspecGuaranteedPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 30 }
hwRsvpTeSenderAdspecGuaranteedMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of the following condi-
tions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 31 }
hwRsvpTeSenderAdspecGuaranteedMtu OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue indicates one of the
following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 32 }
hwRsvpTeSenderAdspecCtrlLoadSvc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the ADSPEC contains a Controlled Load
Service fragment. If FALSE, the ADSPEC does
not contain a Controlled Load Service frag-
ment."
::= { hwRsvpTeSenderEntry 33 }
hwRsvpTeSenderAdspecCtrlLoadBreak OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the Controlled Load Service fragment
has its 'break' bit set, indicating that one or
more nodes along the path do not support the
controlled load service. If FALSE, and
hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, the
'break' bit is not set.
If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this
returns FALSE or noSuchValue."
::= { hwRsvpTeSenderEntry 34 }
hwRsvpTeSenderAdspecCtrlLoadHopCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 35 }
hwRsvpTeSenderAdspecCtrlLoadPathBw OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 36 }
hwRsvpTeSenderAdspecCtrlLoadMinLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of the following condi-
tions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 37 }
hwRsvpTeSenderAdspecCtrlLoadMtu OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue indicates one of the
following conditions:
the invalid bit was set
the parameter was not present
If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this
returns zero or noSuchValue."
::= { hwRsvpTeSenderEntry 38 }
hwRsvpTeSenderTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL value in the RSVP header that was last
received."
::= { hwRsvpTeSenderEntry 39 }
hwRsvpTeLspId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 16-bit identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed to
allow a sender to share resources with itself."
::= { hwRsvpTeSenderEntry 40 }
hwRsvpTeSenderMsgIdSndFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the message sender requests the
peer to send an acknowledgment for the message.
(0x01: ACK desired.)"
::= { hwRsvpTeSenderEntry 41 }
hwRsvpTeSenderMsgIdSndEpoch OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that indicates when the Message_Identi-
fier sequence has been reset."
::= { hwRsvpTeSenderEntry 42 }
hwRsvpTeSenderMsgIdSndNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the Epoch changes or when the value wraps.
A return of 0 indicates the absence of the
MESSAGE_ID object to be sent."
::= { hwRsvpTeSenderEntry 43 }
hwRsvpTeSenderMsgIdRcvFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message ID flag of the message latest received.
It is used to identify whether ACK is desired or
not. And it can be extended. (0x01: ACK desired.)"
::= { hwRsvpTeSenderEntry 44 }
hwRsvpTeSenderMsgIdRcvEpoch OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message ID epoch of the message latest
received form the interface."
::= { hwRsvpTeSenderEntry 45 }
hwRsvpTeSenderMsgIdRcvNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message ID number of the message latest
received form the interface. A return of 0
indicates the absence of the MESSAGE_ID
object received."
::= { hwRsvpTeSenderEntry 46 }
hwRsvpTeSenderClassType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the class-type. A return of zero
indicates the absence of the object."
::= { hwRsvpTeSenderEntry 47 }
hwRsvpTeSenderLabelRequestCtype OBJECT-TYPE
SYNTAX INTEGER
{
withoutLabelRange(1),
withAtmLabelRange(2),
withFrameRelayLabelRange(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of label request (without label range,
with ATM label range, with frame relay label
range, etc)."
::= { hwRsvpTeSenderEntry 48 }
hwRsvpTeSenderLabelRequestL3pid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identifier of the layer 3 protocol using
this path. Standard Ethertype values are used."
::= { hwRsvpTeSenderEntry 49 }
hwRsvpTeSenderLabelRequestAtmMinVpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 12 bit field specifies the lower bound of
a block of Virtual Path Identifiers that is
supported on the originating switch. If the VPI
is less than 12-bits it must be right justified
in this field and preceding bits must be set to
zero."
::= { hwRsvpTeSenderEntry 50 }
hwRsvpTeSenderLabelRequestAtmMinVci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 16 bit field specifies the lower bound of
a block of Virtual Connection Identifiers that
is supported on the originating switch. If the
VCI is less than 16-bits it must be right
justified in this field and preceding bits must
be set to zero."
::= { hwRsvpTeSenderEntry 51 }
hwRsvpTeSenderLabelRequestAtmMaxVpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 12 bit field specifies the upper bound of
a block of Virtual Path Identifiers that is
supported on the originating switch. If the
VPI is less than 12-bits it must be right
justified in this field and preceding bits must
be set to zero."
::= { hwRsvpTeSenderEntry 52 }
hwRsvpTeSenderLabelRequestAtmMaxVci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 16 bit field specifies the upper bound of
a block of Virtual Connection Identifiers that
is supported on the originating switch. If the
VCI is less than 16-bits it must be right
justified in this field and preceding bits must
be set to zero."
::= { hwRsvpTeSenderEntry 53 }
hwRsvpTeSenderLabelRequestFrMinDlci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 23-bit field specifies the lower bound of
a block of Data Link Connection Identifiers
(DLCIs) that is supported on the originating
switch. The DLCI must be right justified in
this field and unused bits must be set to 0."
::= { hwRsvpTeSenderEntry 54 }
hwRsvpTeSenderLabelRequestFrMaxDlci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 23-bit field specifies the upper bound of
a block of Data Link Connection Identifiers
(DLCIs) that is supported on the originating
switch. The DLCI must be right justified in
this field and unused bits must be set to 0."
::= { hwRsvpTeSenderEntry 55 }
hwRsvpTeSenderSessionAttrType OBJECT-TYPE
SYNTAX INTEGER
{
withRa(1),
withoutRa(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the session_attribute (without
resource affinities or with resource affinities)."
::= { hwRsvpTeSenderEntry 56 }
hwRsvpTeSenderSessionAttrSetupPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the session with respect to
taking resources, in the range of 0 to 7. The
value 0 is the highest priority. The Setup
Priority is used in deciding whether this
session can preempt another session."
DEFVAL { 7 }
::= { hwRsvpTeSenderEntry 57 }
hwRsvpTeSenderSessionAttrHoldPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the session with respect to
holding resources, in the range of 0 to 7. The
value 0 is the highest priority. Holding
Priority is used in deciding whether this
session can be preempted by another session."
DEFVAL { 7 }
::= { hwRsvpTeSenderEntry 58 }
hwRsvpTeSenderSessionAttrFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A mixed value. (0x01: Local protection desired;
0x02: Label recording desired; 0x04: SE Style
desired; 0x08: bandwidth protection desired;
0x10: node protection desired; 0x20: Path
re-evaluation request; 0x40: Soft preemption
desired)"
::= { hwRsvpTeSenderEntry 59 }
hwRsvpTeSenderSessionAttrName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Session name, a null padded string of characters."
::= { hwRsvpTeSenderEntry 60 }
hwRsvpTeSenderSessionAttrExcludeAny OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a tunnel any of which
renders a link unacceptable."
::= { hwRsvpTeSenderEntry 61 }
hwRsvpTeSenderSessionAttrIncludeAny OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a tunnel any of which
renders a link acceptable (with respect to this
test). A null set (all bits set to zero)
automatically passes."
::= { hwRsvpTeSenderEntry 62 }
hwRsvpTeSenderSessionAttrIncludeAll OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a tunnel all of which
must be present for a link to be acceptable
(with respect to this test). A null set (all
bits set to zero) automatically passes."
::= { hwRsvpTeSenderEntry 63 }
hwRsvpTeSenderFrrSetupPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the backup path with respect to
taking resources, in the range 0 to 7. The
value 0 is the highest priority. Setup Priority
is used in deciding whether this session can
preempt another session. See [RSVP-TE] for the
usage on priority."
DEFVAL { 7 }
::= { hwRsvpTeSenderEntry 64 }
hwRsvpTeSenderFrrHoldPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the backup path with respect to
holding resources, in the range 0 to 7. The
value 0 is the highest priority. Holding
Priority is used in deciding whether this
session can be preempted by another session. "
DEFVAL { 7 }
::= { hwRsvpTeSenderEntry 65 }
hwRsvpTeSenderFrrHopLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of extra hops the backup path
is allowed to take, from current node (a PLR)
to an MP, with PLR and MP excluded from the count.
For example, hop-limit of 0 means that only
direct links between PLR and MP can be considered."
DEFVAL { 16 }
::= { hwRsvpTeSenderEntry 66 }
hwRsvpTeSenderFrrFlag OBJECT-TYPE
SYNTAX INTEGER
{
oneToOneDesired(1),
facilityDesired(2),
noBackupDesired(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerable value to indicate the protection
schema desired (0x01, One-to-One Backup Desired;
0x02, Facility Backup Desired; 0x03, No Backup
Desired)."
::= { hwRsvpTeSenderEntry 67 }
hwRsvpTeSenderFrrBandwidth OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bandwidth estimate; 32-bit IEEE floating point
integer, in bits per second."
::= { hwRsvpTeSenderEntry 68 }
hwRsvpTeSenderFrrExcludeAny OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a backup path, any of
which renders a link unacceptable."
::= { hwRsvpTeSenderEntry 69 }
hwRsvpTeSenderFrrIncludeAny OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a backup path, any of
which renders a link acceptable (with respect
to this test). A null set (all bits set to zero)
automatically passes."
::= { hwRsvpTeSenderEntry 70 }
hwRsvpTeSenderFrrIncludeAll OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit vector representing a set of attribute
filters associated with a backup path, all of
which must be present for a link to be
acceptable (with respect to this test). A null
set (all bits set to zero) automatically passes."
::= { hwRsvpTeSenderEntry 71 }
hwRsvpTeSenderFrrInuseFlag OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
plrInUse(2),
mpInUse(3),
plrAndMpInUse(4),
underProtection(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerable value to indicate the fast-reroute
state of this sender (normal, PLR in use, MP in
use, PLR in use and MP in use, under protection)."
::= { hwRsvpTeSenderEntry 72 }
hwRsvpTeSenderDiffServPsc OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This 16 bits field indicates a PHB Scheduling
Class to be supported by the LSP."
::= { hwRsvpTeSenderEntry 73 }
hwRsvpTeResvTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeResvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed by receivers in RESV messages."
::= { hwRsvpTeObjects 3 }
hwRsvpTeResvEntry OBJECT-TYPE
SYNTAX HwRsvpTeResvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed by a single receiver's RESV message
concerning a single sender."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvNumber }
::= { hwRsvpTeResvTable 1 }
HwRsvpTeResvEntry ::=
SEQUENCE {
hwRsvpTeResvNumber
Gauge32,
hwRsvpTeResvType
SessionType,
hwRsvpTeResvDestAddr
OCTET STRING,
hwRsvpTeResvSenderAddr
OCTET STRING,
hwRsvpTeResvDestAddrLength
Integer32,
hwRsvpTeResvSenderAddrLength
Integer32,
hwRsvpTeResvHopAddr
OCTET STRING,
hwRsvpTeResvHopLih
Integer32,
hwRsvpTeResvInterface
Integer32,
hwRsvpTeResvService
QosService,
hwRsvpTeResvTSpecRate
BitRate,
hwRsvpTeResvTSpecPeakRate
BitRate,
hwRsvpTeResvTSpecBurst
BurstSize,
hwRsvpTeResvTSpecMinTu
MessageSize,
hwRsvpTeResvTSpecMaxTu
MessageSize,
hwRsvpTeResvRSpecRate
BitRate,
hwRsvpTeResvRSpecSlack
Integer32,
hwRsvpTeResvInterval
Integer32,
hwRsvpTeResvScope
OCTET STRING,
hwRsvpTeResvShared
TruthValue,
hwRsvpTeResvExplicit
TruthValue,
hwRsvpTeResvRsvpHop
TruthValue,
hwRsvpTeResvPolicy
OCTET STRING,
hwRsvpTeResvTtl
Integer32,
hwRsvpTeResvConfirm
OCTET STRING
}
hwRsvpTeResvNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this reservation request. This
is for SNMP Indexing purposes only and has no
relation to any protocol value."
::= { hwRsvpTeResvEntry 1 }
hwRsvpTeResvType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { hwRsvpTeResvEntry 2 }
hwRsvpTeResvDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session."
::= { hwRsvpTeResvEntry 3 }
hwRsvpTeResvSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'."
::= { hwRsvpTeResvEntry 4 }
hwRsvpTeResvDestAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeResvEntry 5 }
hwRsvpTeResvSenderAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeResvEntry 6 }
hwRsvpTeResvHopAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address used by the next RSVP hop (which
may be the ultimate receiver)."
::= { hwRsvpTeResvEntry 7 }
hwRsvpTeResvHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Logical Interface Handle received from the
previous RSVP hop (which may be the ultimate
receiver)."
::= { hwRsvpTeResvEntry 8 }
hwRsvpTeResvInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which
this RESV message was most recently received."
::= { hwRsvpTeResvEntry 9 }
hwRsvpTeResvService OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Service classification requested by
the receiver."
::= { hwRsvpTeResvEntry 10 }
hwRsvpTeResvTSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeResvTSpec-
PeakRate (if supported by the service model);
however, averaged across two or more burst in-
tervals, the rate should not exceed
hwRsvpTeResvTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower."
::= { hwRsvpTeResvEntry 11 }
hwRsvpTeResvTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Bit Rate of the sender's data stream.
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or noSuchValue."
::= { hwRsvpTeResvEntry 12 }
hwRsvpTeResvTSpecBurst OBJECT-TYPE
SYNTAX BurstSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest burst expected from
the sender at a time.
If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what would be
provided under normal circumstances. Such pac-
ing is at the network's option."
::= { hwRsvpTeResvEntry 13 }
hwRsvpTeResvTSpecMinTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size."
::= { hwRsvpTeResvEntry 14 }
hwRsvpTeResvTSpecMaxTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU."
::= { hwRsvpTeResvEntry 15 }
hwRsvpTeResvRSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is guaranteed, as
specified by hwRsvpTeResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue."
::= { hwRsvpTeResvEntry 16 }
hwRsvpTeResvRSpecSlack OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is guaranteed, as
specified by hwRsvpTeResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue."
::= { hwRsvpTeResvEntry 17 }
hwRsvpTeResvInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between refresh messages as ad-
vertised by the Next Hop."
::= { hwRsvpTeResvEntry 18 }
hwRsvpTeResvScope OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the scope object, displayed as
an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.
If the length is non-zero, this contains a
series of IP4 or IP6 addresses."
::= { hwRsvpTeResvEntry 19 }
hwRsvpTeResvShared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to
this sender is requested."
::= { hwRsvpTeResvEntry 20 }
hwRsvpTeResvExplicit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, individual senders are listed using
Filter Specifications. If FALSE, all senders
are implicitly selected. The Scope Object will
contain a list of senders that need to receive
this reservation request for the purpose of
routing the RESV message."
::= { hwRsvpTeResvEntry 21 }
hwRsvpTeResvRsvpHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the node believes that the previous
IP hop is an RSVP hop. If FALSE, the node be-
lieves that the previous IP hop may not be an
RSVP hop."
::= { hwRsvpTeResvEntry 22 }
hwRsvpTeResvPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { hwRsvpTeResvEntry 23 }
hwRsvpTeResvTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL value in the RSVP header that was last
received."
::= { hwRsvpTeResvEntry 24 }
hwRsvpTeResvConfirm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receiver's address."
::= { hwRsvpTeResvEntry 25 }
hwRsvpTeResvFwdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeResvFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed upstream in RESV messages."
::= { hwRsvpTeObjects 4 }
hwRsvpTeResvFwdEntry OBJECT-TYPE
SYNTAX HwRsvpTeResvFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed upstream in an RESV message concern-
ing a single sender."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvFwdNumber }
::= { hwRsvpTeResvFwdTable 1 }
HwRsvpTeResvFwdEntry ::=
SEQUENCE {
hwRsvpTeResvFwdNumber
Gauge32,
hwRsvpTeResvFwdType
SessionType,
hwRsvpTeResvFwdDestAddr
OCTET STRING,
hwRsvpTeResvFwdSenderAddr
OCTET STRING,
hwRsvpTeResvFwdDestAddrLength
Integer32,
hwRsvpTeResvFwdSenderAddrLength
Integer32,
hwRsvpTeResvFwdHopAddr
OCTET STRING,
hwRsvpTeResvFwdHopLih
Integer32,
hwRsvpTeResvFwdInterface
Integer32,
hwRsvpTeResvFwdService
QosService,
hwRsvpTeResvFwdTSpecRate
BitRate,
hwRsvpTeResvFwdTSpecPeakRate
BitRate,
hwRsvpTeResvFwdTSpecBurst
BurstSize,
hwRsvpTeResvFwdTSpecMinTu
MessageSize,
hwRsvpTeResvFwdTSpecMaxTu
MessageSize,
hwRsvpTeResvFwdRSpecRate
BitRate,
hwRsvpTeResvFwdRSpecSlack
Integer32,
hwRsvpTeResvFwdInterval
Integer32,
hwRsvpTeResvFwdScope
OCTET STRING,
hwRsvpTeResvFwdShared
TruthValue,
hwRsvpTeResvFwdExplicit
TruthValue,
hwRsvpTeResvFwdRsvpHop
TruthValue,
hwRsvpTeResvFwdPolicy
OCTET STRING,
hwRsvpTeResvFwdTtl
Integer32,
hwRsvpTeResvFwdMsgIdFlag
Integer32,
hwRsvpTeResvFwdMsgIdEpoch
Gauge32,
hwRsvpTeResvFwdMsgIdNumber
Gauge32
}
hwRsvpTeResvFwdNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this reservation request. This
is for SNMP Indexing purposes only and has no
relation to any protocol value."
::= { hwRsvpTeResvFwdEntry 1 }
hwRsvpTeResvFwdType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { hwRsvpTeResvFwdEntry 2 }
hwRsvpTeResvFwdDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session."
::= { hwRsvpTeResvFwdEntry 3 }
hwRsvpTeResvFwdSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'."
::= { hwRsvpTeResvFwdEntry 4 }
hwRsvpTeResvFwdDestAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeResvFwdEntry 5 }
hwRsvpTeResvFwdSenderAddrLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits."
::= { hwRsvpTeResvFwdEntry 6 }
hwRsvpTeResvFwdHopAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the (previous) RSVP that will
receive this message."
::= { hwRsvpTeResvFwdEntry 7 }
hwRsvpTeResvFwdHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Logical Interface Handle sent to the (pre-
vious) RSVP that will receive this message."
::= { hwRsvpTeResvFwdEntry 8 }
hwRsvpTeResvFwdInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which
this RESV message was most recently sent."
::= { hwRsvpTeResvFwdEntry 9 }
hwRsvpTeResvFwdService OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Service classification requested."
::= { hwRsvpTeResvFwdEntry 10 }
hwRsvpTeResvFwdTSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeResvFwdT-
SpecPeakRate (if supported by the service
model);however, averaged across two or more
burst intervals, the rate should not
exceed hwRsvpTeResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower."
::= { hwRsvpTeResvFwdEntry 11 }
hwRsvpTeResvFwdTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Bit Rate of the sender's data stream
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or noSuchValue."
::= { hwRsvpTeResvFwdEntry 12 }
hwRsvpTeResvFwdTSpecBurst OBJECT-TYPE
SYNTAX BurstSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest burst expected from
the sender at a time.
If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what would be
provided under normal circumstances. Such pac-
ing is at the network's option."
::= { hwRsvpTeResvFwdEntry 13 }
hwRsvpTeResvFwdTSpecMinTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size."
::= { hwRsvpTeResvFwdEntry 14 }
hwRsvpTeResvFwdTSpecMaxTu OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU."
::= { hwRsvpTeResvFwdEntry 15 }
hwRsvpTeResvFwdRSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bytes per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by hwRsvpTeResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue."
::= { hwRsvpTeResvFwdEntry 16 }
hwRsvpTeResvFwdRSpecSlack OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by hwRsvpTeResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue."
::= { hwRsvpTeResvFwdEntry 17 }
hwRsvpTeResvFwdInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between refresh messages adver-
tised to the Previous Hop."
::= { hwRsvpTeResvFwdEntry 18 }
hwRsvpTeResvFwdScope OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the scope object, displayed as
an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { hwRsvpTeResvFwdEntry 19 }
hwRsvpTeResvFwdShared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to
this sender is requested."
::= { hwRsvpTeResvFwdEntry 20 }
hwRsvpTeResvFwdExplicit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, individual senders are listed using
Filter Specifications. If FALSE, all senders
are implicitly selected. The Scope Object will
contain a list of senders that need to receive
this reservation request for the purpose of
routing the RESV message."
::= { hwRsvpTeResvFwdEntry 21 }
hwRsvpTeResvFwdRsvpHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the node believes that the next IP
hop is an RSVP hop. If FALSE, the node be-
lieves that the next IP hop may not be an RSVP
hop."
::= { hwRsvpTeResvFwdEntry 22 }
hwRsvpTeResvFwdPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { hwRsvpTeResvFwdEntry 23 }
hwRsvpTeResvFwdTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL value in the RSVP header that was last
received."
::= { hwRsvpTeResvFwdEntry 24 }
hwRsvpTeResvFwdMsgIdFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the message sender requests the
peer to send an acknowledgment for the message.
(0x01: ACK desired.)"
::= { hwRsvpTeResvFwdEntry 25 }
hwRsvpTeResvFwdMsgIdEpoch OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that indicates when the Message_Identi-
fier sequence has been reset."
::= { hwRsvpTeResvFwdEntry 26 }
hwRsvpTeResvFwdMsgIdNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the epoch changes or when the value wraps.
A return of 0 indicates the absence of the
MESSAGE_ID object."
::= { hwRsvpTeResvFwdEntry 27 }
-- The RSVP Interface Attributes Database contains the
-- RSVP-specific information for an interface. Information
-- that is shared with other reservation procedures such
-- as ST-II is in the Integrated Interface Attributes
-- Database.
hwRsvpTeIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RSVP-specific attributes of the system's
interfaces."
::= { hwRsvpTeObjects 5 }
hwRsvpTeIfEntry OBJECT-TYPE
SYNTAX HwRsvpTeIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RSVP-specific attributes of the a given
interface."
INDEX { ifIndex }
::= { hwRsvpTeIfTable 1 }
HwRsvpTeIfEntry ::=
SEQUENCE {
hwRsvpTeIfUdpNbrs
Gauge32,
hwRsvpTeIfIpNbrs
Gauge32,
hwRsvpTeIfNbrs
Gauge32,
hwRsvpTeIfRefreshBlockadeMultiple
Integer32,
hwRsvpTeIfRefreshMultiple
Integer32,
hwRsvpTeIfTtl
Integer32,
hwRsvpTeIfRefreshInterval
TimeInterval,
hwRsvpTeIfRouteDelay
TimeInterval,
hwRsvpTeIfEnabled
TruthValue,
hwRsvpTeIfUdpRequired
TruthValue,
hwRsvpTeIfStatus
RowStatus,
hwRsvpTeIfHelloEnabled
TruthValue,
hwRsvpTeIfSrefreshEnabled
TruthValue,
hwRsvpTeIfSrefreshInterval
TimeInterval,
hwRsvpTeIfRetranIncDelta
Integer32,
hwRsvpTeIfRetranInterval
TimeInterval,
hwRsvpTeIfAuthEnabled
TruthValue,
hwRsvpTeIfAuthEncrypted
TruthValue,
hwRsvpTeIfAuthHandshake
TruthValue,
hwRsvpTeIfAuthLifeTime
TimeInterval,
hwRsvpTeIfAuthKey
OCTET STRING,
hwRsvpTeIfWindowSize
Integer32
}
hwRsvpTeIfUdpNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors perceived to be using
only the RSVP UDP Encapsulation."
::= { hwRsvpTeIfEntry 1 }
hwRsvpTeIfIpNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors perceived to be using
only the RSVP IP Encapsulation."
::= { hwRsvpTeIfEntry 2 }
hwRsvpTeIfNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors currently perceived;
this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs
by the number of neighbors using both encapsu-
lations."
::= { hwRsvpTeIfEntry 3 }
hwRsvpTeIfRefreshBlockadeMultiple OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered."
::= { hwRsvpTeIfEntry 4 }
hwRsvpTeIfRefreshMultiple OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged out."
::= { hwRsvpTeIfEntry 5 }
-- which is to say, no override
hwRsvpTeIfTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means."
::= { hwRsvpTeIfEntry 6 }
-- 30 seconds
hwRsvpTeIfRefreshInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface."
DEFVAL { 30000 }
::= { hwRsvpTeIfEntry 7 }
-- 2 seconds
hwRsvpTeIfRouteDelay OBJECT-TYPE
SYNTAX TimeInterval
UNITS "hundredths of a second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The approximate period from the time a route
is changed to the time a resulting message ap-
pears on the interface."
DEFVAL { 200 }
::= { hwRsvpTeIfEntry 8 }
hwRsvpTeIfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Its value is always TRUE, if RSVP is enabled
on this Interface."
::= { hwRsvpTeIfEntry 9 }
hwRsvpTeIfUdpRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if hwRsvpTeI-
fUdpNbrs is not zero."
::= { hwRsvpTeIfEntry 10 }
hwRsvpTeIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'active' on interfaces that are configured for
RSVP."
::= { hwRsvpTeIfEntry 11 }
hwRsvpTeIfHelloEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, RSVPTE hello is enabled on this
Interface. If FALSE, RSVPTE hello is not
enabled on this interface"
::= { hwRsvpTeIfEntry 12 }
hwRsvpTeIfSrefreshEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, srefresh is enabled on this interface.
If FALSE, srefresh is not enabled on this
interface."
::= { hwRsvpTeIfEntry 13 }
hwRsvpTeIfSrefreshInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The srefresh interval. I.e. time difference
between 2 refreshes."
DEFVAL { 30000 }
::= { hwRsvpTeIfEntry 14 }
hwRsvpTeIfRetranIncDelta OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delta governs the speed with which the sender
increases the retransmission interval. The
ratio of two successive retransmission intervals
is (1 + Delta)."
::= { hwRsvpTeIfEntry 15 }
hwRsvpTeIfRetranInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmission interval."
DEFVAL { 500 }
::= { hwRsvpTeIfEntry 16 }
hwRsvpTeIfAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, authentication is enabled on this
interface. If FALSE, authentication is not
enabled on this interface."
::= { hwRsvpTeIfEntry 17 }
hwRsvpTeIfAuthEncrypted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This states that authentication key is encrypted
or not."
::= { hwRsvpTeIfEntry 18 }
hwRsvpTeIfAuthHandshake OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Handshaking is enabled authentications."
::= { hwRsvpTeIfEntry 19 }
hwRsvpTeIfAuthLifeTime OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication life time."
DEFVAL { 1800000 }
::= { hwRsvpTeIfEntry 20 }
hwRsvpTeIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication key, used for authentication
processing. "
::= { hwRsvpTeIfEntry 21 }
hwRsvpTeIfWindowSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administrators can specify a message window
corresponding to the worst case reordering
behavior. For example, one might specify that
packets reordered within a 32 message window
would be accepted. If no reordering can occur,
the window is set to one. The maximum value is
64."
DEFVAL { 1 }
::= { hwRsvpTeIfEntry 22 }
-- The RSVP Neighbor Database lists the neighbors the RSVP
-- process currently is receiving messages from.
hwRsvpTeNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the Neighbors of an
RSVP system."
::= { hwRsvpTeObjects 6 }
hwRsvpTeNbrEntry OBJECT-TYPE
SYNTAX HwRsvpTeNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing a single RSVP Neigh-
bor."
INDEX { ifIndex, hwRsvpTeNbrAddress }
::= { hwRsvpTeNbrTable 1 }
HwRsvpTeNbrEntry ::=
SEQUENCE {
hwRsvpTeNbrAddress
OCTET STRING,
hwRsvpTeNbrProtocol
INTEGER,
hwRsvpTeNbrStatus
RowStatus,
hwRsvpTeNbrSendersNumber
Gauge32,
hwRsvpTeNbrReceiversNumber
Gauge32,
hwRsvpTeNbrHelloEnabled
TruthValue,
hwRsvpTeNbrHelloSrcInstance
Gauge32,
hwRsvpTeNbrHelloDstInstance
Gauge32,
hwRsvpTeNbrHelloLostCounter
Gauge32,
hwRsvpTeNbrHelloType
INTEGER,
hwRsvpTeNbrGrCapability
Integer32,
hwRsvpTeNbrGrRestartTime
TimeStamp,
hwRsvpTeNbrGrRecoveryTime
TimeStamp,
hwRsvpTeNbrGrStatus
INTEGER,
hwRsvpTeNbrAuthKeyId
OCTET STRING,
hwRsvpTeNbrReductionEnabled
TruthValue,
hwRsvpTeNbrReliabilityEnabled
TruthValue
}
hwRsvpTeNbrAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP4 or IP6 Address used by this neighbor.
This object may not be changed when the value
of the RowStatus object is 'active'."
::= { hwRsvpTeNbrEntry 1 }
hwRsvpTeNbrProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
udp(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation being used by this neigh-
bor."
::= { hwRsvpTeNbrEntry 2 }
hwRsvpTeNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'active' for all neighbors. This object may
be used to configure neighbors. In the pres-
ence of configured neighbors, the implementa-
tion may (but is not required to) limit the set
of valid neighbors to those configured."
::= { hwRsvpTeNbrEntry 3 }
hwRsvpTeNbrSendersNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of senders on the neighbor."
::= { hwRsvpTeNbrEntry 4 }
hwRsvpTeNbrReceiversNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of receivers on the neighbor."
::= { hwRsvpTeNbrEntry 5 }
hwRsvpTeNbrHelloEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, hello is enabled on the neighbor."
::= { hwRsvpTeNbrEntry 6 }
hwRsvpTeNbrHelloSrcInstance OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source instance of the neighbor."
::= { hwRsvpTeNbrEntry 7 }
hwRsvpTeNbrHelloDstInstance OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination instance of the neighbor."
::= { hwRsvpTeNbrEntry 8 }
hwRsvpTeNbrHelloLostCounter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the hello messages have been
sent to the neighbor for which hello ACK has
not received yet."
::= { hwRsvpTeNbrEntry 9 }
hwRsvpTeNbrHelloType OBJECT-TYPE
SYNTAX INTEGER
{
request(1),
ack(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello type that is being sent to the neighbor.
A return of 3[none] indicates that hello is
disabled on the nbr."
::= { hwRsvpTeNbrEntry 10 }
hwRsvpTeNbrGrCapability OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gives neighbor capability to support GR or
undergo GR, in case of control plane restart.
A mixed value. (0x01: Self GR capability of
neighbor; 0x02: GR support capability of
neighbor; 0x04: Neighbor capable of receiving
RecoveryPath message; 0x08: Neighbor capable
of sending RecoveryPath message)"
::= { hwRsvpTeNbrEntry 11 }
hwRsvpTeNbrGrRestartTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor nodes GR restart time value."
::= { hwRsvpTeNbrEntry 12 }
hwRsvpTeNbrGrRecoveryTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor nodes GR recovery time value."
::= { hwRsvpTeNbrEntry 13 }
hwRsvpTeNbrGrStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
supporting(2),
restarting(3),
restartTimerRunning(4),
recoveryTimerRunning(5),
grEnd(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor nodes GR status. (0x01, No GR activity;
0x02, Neighbor router is supporting GR; 0x03,
Neighbor router is restarting; 0x04, Restart
timer is running; 0x05, Recovery timer is
running; 0x06, Neighbor GR end.)"
::= { hwRsvpTeNbrEntry 14 }
hwRsvpTeNbrAuthKeyId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor's authentication key, used for
authentication processing. A return of null
string indicates the absence of the item."
::= { hwRsvpTeNbrEntry 15 }
hwRsvpTeNbrReductionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE srefresh is enabled on the neighbor,
else srefresh is not enabled on the neighbor."
::= { hwRsvpTeNbrEntry 16 }
hwRsvpTeNbrReliabilityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE reliability is enabled on the neighbor,
else reliability is not enabled on the neighbor."
::= { hwRsvpTeNbrEntry 17 }
hwRsvpTeMessageIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeMessageIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describes the MessageIds of an
RSVP system."
::= { hwRsvpTeObjects 7 }
hwRsvpTeMessageIdEntry OBJECT-TYPE
SYNTAX HwRsvpTeMessageIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ifIndex, hwRsvpTeNbrAddress, hwRsvpTeMessageIdEpoch, hwRsvpTeMessageIdNumber }
::= { hwRsvpTeMessageIdTable 1 }
HwRsvpTeMessageIdEntry ::=
SEQUENCE {
hwRsvpTeMessageIdEpoch
Gauge32,
hwRsvpTeMessageIdNumber
Gauge32,
hwRsvpTeMessageIdFlag
INTEGER
}
hwRsvpTeMessageIdEpoch OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value that indicates when the Message_Identi-
fier sequence has been reset."
::= { hwRsvpTeMessageIdEntry 1 }
hwRsvpTeMessageIdNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the epoch changes or when the value wraps."
::= { hwRsvpTeMessageIdEntry 2 }
hwRsvpTeMessageIdFlag OBJECT-TYPE
SYNTAX INTEGER
{
senderIncoming(1),
senderOutgoing(2),
resv(3),
resvFwd(4),
rtBuff(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A enumerable value to indicate the type of this
Message_Identifier. (1: SenderIncoming; 2:
SenderOutgoing; 3: Resv; 4: ResvFwd; 5: RtBuff)"
::= { hwRsvpTeMessageIdEntry 3 }
hwRsvpTeFilterSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeFilterSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describes the FilterSpecs of an
RSVP system."
::= { hwRsvpTeObjects 8 }
hwRsvpTeFilterSpecEntry OBJECT-TYPE
SYNTAX HwRsvpTeFilterSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvNumber, hwRsvpTeFilterSpecNumber }
::= { hwRsvpTeFilterSpecTable 1 }
HwRsvpTeFilterSpecEntry ::=
SEQUENCE {
hwRsvpTeFilterSpecNumber
Gauge32,
hwRsvpTeFilterSpecLspId
Integer32,
hwRsvpTeFilterSpecIngressLsrId
OCTET STRING,
hwRsvpTeFilterSpecLabel
Gauge32
}
hwRsvpTeFilterSpecNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this Filter_Spec. This is for
SNMP Indexing purposes only and has no relation
to any protocol value."
::= { hwRsvpTeFilterSpecEntry 1 }
hwRsvpTeFilterSpecLspId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 16-bit identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed to
allow a sender to share resources with itself."
::= { hwRsvpTeFilterSpecEntry 2 }
hwRsvpTeFilterSpecIngressLsrId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address for a sender node."
::= { hwRsvpTeFilterSpecEntry 3 }
hwRsvpTeFilterSpecLabel OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the label arranged by next hop.
A return of 4294967295 indicates the absence
of the item."
::= { hwRsvpTeFilterSpecEntry 4 }
hwRsvpTeRroTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeRroEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describes the RRO sub-objects of
an RSVP system."
::= { hwRsvpTeObjects 9 }
hwRsvpTeRroEntry OBJECT-TYPE
SYNTAX HwRsvpTeRroEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber, hwRsvpTeRroNumber }
::= { hwRsvpTeRroTable 1 }
HwRsvpTeRroEntry ::=
SEQUENCE {
hwRsvpTeRroNumber
Gauge32,
hwRsvpTeRroType
INTEGER,
hwRsvpTeRroIpAddr
OCTET STRING,
hwRsvpTeRroIpPrefixLen
Integer32,
hwRsvpTeRroLabel
Gauge32,
hwRsvpTeRroFlag
Integer32
}
hwRsvpTeRroNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this RRO sub-object. This is
for SNMP Indexing purposes only and has no
relation to any protocol value."
::= { hwRsvpTeRroEntry 1 }
hwRsvpTeRroType OBJECT-TYPE
SYNTAX INTEGER
{
ipv4(1),
ipv6(2),
label(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerable value that indicates the type of
this sub-object. (0x01: IPv4 address; 0x02:
IPv6 address; 0x03: Label.)"
::= { hwRsvpTeRroEntry 2 }
hwRsvpTeRroIpAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address for this sub-object if the type is
'IPv4 address' of 'IPv6 address'. A return of
null string indicates the absence of the item."
::= { hwRsvpTeRroEntry 3 }
hwRsvpTeRroIpPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP prefix length for this sub-object if the
type is 'IPv4 address' of 'IPv6 address'. A
return of 0 indicates the absence of the
item."
::= { hwRsvpTeRroEntry 4 }
hwRsvpTeRroLabel OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the label if the type is 'Label'.
A return of 4294967295 indicates the absence
of the item."
::= { hwRsvpTeRroEntry 5 }
hwRsvpTeRroFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hwRsvpTeRroType is IPv4 or IPv6, it is a
mixed value. (0x01: Local protection
available; 0x02: Local protection in use; 0x04:
bandwidth protection; 0x08: node protection;
0x10: preemption pending; 0x20: node ID.) If
hwRsvpTeRroType is Label, 0x01 means global
label. A return of zero indicates no bit was
set."
::= { hwRsvpTeRroEntry 6 }
hwRsvpTeEroTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRsvpTeEroEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describes the ERO sub-objects
of an RSVP system."
::= { hwRsvpTeObjects 10 }
hwRsvpTeEroEntry OBJECT-TYPE
SYNTAX HwRsvpTeEroEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber, hwRsvpTeEroNumber }
::= { hwRsvpTeEroTable 1 }
HwRsvpTeEroEntry ::=
SEQUENCE {
hwRsvpTeEroNumber
Gauge32,
hwRsvpTeEroType
INTEGER,
hwRsvpTeEroIpAddr
OCTET STRING,
hwRsvpTeEroIpPrefixLen
Integer32
}
hwRsvpTeEroNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this ERO sub-object. This is for
SNMP Indexing purposes only and has no relation
to any protocol value."
::= { hwRsvpTeEroEntry 1 }
hwRsvpTeEroType OBJECT-TYPE
SYNTAX INTEGER
{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerable value that indicates the type of
this sub-object. (0x01: IPv4 address; 0x02:
IPv6 address.)"
::= { hwRsvpTeEroEntry 2 }
hwRsvpTeEroIpAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address for this sub-object."
::= { hwRsvpTeEroEntry 3 }
hwRsvpTeEroIpPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP prefix length for this sub-object."
::= { hwRsvpTeEroEntry 4 }
-- traps
hwRsvpTeConformance OBJECT IDENTIFIER ::= { hwRsvpTe 2 }
-- conformance information
hwRsvpTeGroups OBJECT IDENTIFIER ::= { hwRsvpTeConformance 1 }
hwRsvpTeSessionGroup OBJECT-GROUP
OBJECTS { hwRsvpTeSessionType, hwRsvpTeSessionDestAddr, hwRsvpTeSessionDestAddrLength, hwRsvpTeSessionSenders, hwRsvpTeSessionReceivers,
hwRsvpTeSessionRequests, hwRsvpTeSessionTunnelId, hwRsvpTeSessionTunnelExtId, hwRsvpTeSessionLspsNumber, hwRsvpTeSessionStyle
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { hwRsvpTeGroups 1 }
hwRsvpTeSenderGroup OBJECT-GROUP
OBJECTS { hwRsvpTeSenderType, hwRsvpTeSenderDestAddr, hwRsvpTeSenderAddr, hwRsvpTeSenderDestAddrLength, hwRsvpTeSenderAddrLength,
hwRsvpTeSenderHopAddr, hwRsvpTeSenderHopLih, hwRsvpTeSenderInterface, hwRsvpTeSenderTSpecRate, hwRsvpTeSenderTSpecPeakRate,
hwRsvpTeSenderTSpecBurst, hwRsvpTeSenderTSpecMinTu, hwRsvpTeSenderTSpecMaxTu, hwRsvpTeSenderInterval, hwRsvpTeSenderRsvpHop,
hwRsvpTeSenderPolicy, hwRsvpTeSenderAdspecBreak, hwRsvpTeSenderAdspecHopCount, hwRsvpTeSenderAdspecPathBw, hwRsvpTeSenderAdspecMinLatency,
hwRsvpTeSenderAdspecMtu, hwRsvpTeSenderAdspecGuaranteedSvc, hwRsvpTeSenderAdspecGuaranteedBreak, hwRsvpTeSenderAdspecGuaranteedCtot, hwRsvpTeSenderAdspecGuaranteedDtot,
hwRsvpTeSenderAdspecGuaranteedCsum, hwRsvpTeSenderAdspecGuaranteedDsum, hwRsvpTeSenderAdspecGuaranteedHopCount, hwRsvpTeSenderAdspecGuaranteedPathBw, hwRsvpTeSenderAdspecGuaranteedMinLatency,
hwRsvpTeSenderAdspecGuaranteedMtu, hwRsvpTeSenderAdspecCtrlLoadSvc, hwRsvpTeSenderAdspecCtrlLoadBreak, hwRsvpTeSenderAdspecCtrlLoadHopCount, hwRsvpTeSenderAdspecCtrlLoadPathBw,
hwRsvpTeSenderAdspecCtrlLoadMinLatency, hwRsvpTeSenderAdspecCtrlLoadMtu, hwRsvpTeSenderTtl, hwRsvpTeLspId, hwRsvpTeSenderMsgIdSndFlag,
hwRsvpTeSenderMsgIdSndEpoch, hwRsvpTeSenderMsgIdSndNumber, hwRsvpTeSenderMsgIdRcvFlag, hwRsvpTeSenderMsgIdRcvEpoch, hwRsvpTeSenderMsgIdRcvNumber,
hwRsvpTeSenderClassType, hwRsvpTeSenderLabelRequestCtype, hwRsvpTeSenderLabelRequestL3pid, hwRsvpTeSenderLabelRequestAtmMinVpi, hwRsvpTeSenderLabelRequestAtmMinVci,
hwRsvpTeSenderLabelRequestAtmMaxVpi, hwRsvpTeSenderLabelRequestAtmMaxVci, hwRsvpTeSenderLabelRequestFrMinDlci, hwRsvpTeSenderLabelRequestFrMaxDlci, hwRsvpTeSenderSessionAttrType,
hwRsvpTeSenderSessionAttrSetupPrio, hwRsvpTeSenderSessionAttrHoldPrio, hwRsvpTeSenderSessionAttrFlag, hwRsvpTeSenderSessionAttrName, hwRsvpTeSenderSessionAttrExcludeAny,
hwRsvpTeSenderSessionAttrIncludeAny, hwRsvpTeSenderSessionAttrIncludeAll, hwRsvpTeSenderFrrSetupPrio, hwRsvpTeSenderFrrHoldPrio, hwRsvpTeSenderFrrHopLimit,
hwRsvpTeSenderFrrFlag, hwRsvpTeSenderFrrBandwidth, hwRsvpTeSenderFrrExcludeAny, hwRsvpTeSenderFrrIncludeAny, hwRsvpTeSenderFrrIncludeAll,
hwRsvpTeSenderFrrInuseFlag, hwRsvpTeSenderDiffServPsc }
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { hwRsvpTeGroups 2 }
hwRsvpTeResvGroup OBJECT-GROUP
OBJECTS { hwRsvpTeResvType, hwRsvpTeResvDestAddr, hwRsvpTeResvSenderAddr, hwRsvpTeResvDestAddrLength, hwRsvpTeResvSenderAddrLength,
hwRsvpTeResvHopAddr, hwRsvpTeResvHopLih, hwRsvpTeResvInterface, hwRsvpTeResvService, hwRsvpTeResvTSpecRate,
hwRsvpTeResvTSpecPeakRate, hwRsvpTeResvTSpecBurst, hwRsvpTeResvTSpecMinTu, hwRsvpTeResvTSpecMaxTu, hwRsvpTeResvRSpecRate,
hwRsvpTeResvRSpecSlack, hwRsvpTeResvInterval, hwRsvpTeResvScope, hwRsvpTeResvShared, hwRsvpTeResvExplicit,
hwRsvpTeResvRsvpHop, hwRsvpTeResvPolicy, hwRsvpTeResvTtl, hwRsvpTeResvConfirm }
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { hwRsvpTeGroups 3 }
hwRsvpTeResvFwdGroup OBJECT-GROUP
OBJECTS { hwRsvpTeResvFwdType, hwRsvpTeResvFwdDestAddr, hwRsvpTeResvFwdSenderAddr, hwRsvpTeResvFwdDestAddrLength, hwRsvpTeResvFwdSenderAddrLength,
hwRsvpTeResvFwdHopAddr, hwRsvpTeResvFwdHopLih, hwRsvpTeResvFwdInterface, hwRsvpTeResvFwdService, hwRsvpTeResvFwdTSpecRate,
hwRsvpTeResvFwdTSpecPeakRate, hwRsvpTeResvFwdTSpecBurst, hwRsvpTeResvFwdTSpecMinTu, hwRsvpTeResvFwdTSpecMaxTu, hwRsvpTeResvFwdRSpecRate,
hwRsvpTeResvFwdRSpecSlack, hwRsvpTeResvFwdInterval, hwRsvpTeResvFwdScope, hwRsvpTeResvFwdShared, hwRsvpTeResvFwdExplicit,
hwRsvpTeResvFwdPolicy, hwRsvpTeResvFwdTtl, hwRsvpTeResvFwdMsgIdFlag, hwRsvpTeResvFwdMsgIdEpoch, hwRsvpTeResvFwdMsgIdNumber,
hwRsvpTeResvFwdRsvpHop }
STATUS current
DESCRIPTION
"These objects are optional, used for some RSVP
Systems."
::= { hwRsvpTeGroups 4 }
hwRsvpTeIfGroup OBJECT-GROUP
OBJECTS { hwRsvpTeIfUdpNbrs, hwRsvpTeIfIpNbrs, hwRsvpTeIfNbrs, hwRsvpTeIfRefreshBlockadeMultiple, hwRsvpTeIfRefreshMultiple,
hwRsvpTeIfTtl, hwRsvpTeIfRefreshInterval, hwRsvpTeIfRouteDelay, hwRsvpTeIfEnabled, hwRsvpTeIfUdpRequired,
hwRsvpTeIfStatus, hwRsvpTeIfHelloEnabled, hwRsvpTeIfSrefreshEnabled, hwRsvpTeIfSrefreshInterval, hwRsvpTeIfRetranIncDelta,
hwRsvpTeIfRetranInterval, hwRsvpTeIfAuthEnabled, hwRsvpTeIfAuthEncrypted , hwRsvpTeIfAuthHandshake, hwRsvpTeIfAuthKey,
hwRsvpTeIfWindowSize, hwRsvpTeIfAuthLifeTime }
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { hwRsvpTeGroups 5 }
hwRsvpTeNbrGroup OBJECT-GROUP
OBJECTS { hwRsvpTeNbrHelloSrcInstance, hwRsvpTeNbrHelloDstInstance, hwRsvpTeNbrHelloLostCounter, hwRsvpTeNbrHelloType, hwRsvpTeNbrHelloEnabled,
hwRsvpTeNbrSendersNumber, hwRsvpTeNbrReceiversNumber, hwRsvpTeNbrGrCapability, hwRsvpTeNbrGrRestartTime, hwRsvpTeNbrGrRecoveryTime,
hwRsvpTeNbrGrStatus, hwRsvpTeNbrAuthKeyId, hwRsvpTeNbrReductionEnabled, hwRsvpTeNbrReliabilityEnabled, hwRsvpTeNbrProtocol,
hwRsvpTeNbrStatus }
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { hwRsvpTeGroups 6 }
hwRsvpTeMessageIdGroup OBJECT-GROUP
OBJECTS { hwRsvpTeMessageIdFlag }
STATUS current
DESCRIPTION
"Description."
::= { hwRsvpTeGroups 7 }
hwRsvpTeFilterSpecGroup OBJECT-GROUP
OBJECTS { hwRsvpTeFilterSpecLspId , hwRsvpTeFilterSpecIngressLsrId , hwRsvpTeFilterSpecLabel }
STATUS current
DESCRIPTION
"Description."
::= { hwRsvpTeGroups 8 }
hwRsvpTeRroGroup OBJECT-GROUP
OBJECTS { hwRsvpTeRroType , hwRsvpTeRroIpAddr , hwRsvpTeRroIpPrefixLen , hwRsvpTeRroLabel , hwRsvpTeRroFlag
}
STATUS current
DESCRIPTION
"Description."
::= { hwRsvpTeGroups 9 }
hwRsvpTeEroGroup OBJECT-GROUP
OBJECTS { hwRsvpTeEroType , hwRsvpTeEroIpAddr , hwRsvpTeEroIpPrefixLen }
STATUS current
DESCRIPTION
"Description."
::= { hwRsvpTeGroups 10 }
hwRsvpTeCompliances OBJECT IDENTIFIER ::= { hwRsvpTeConformance 2 }
-- compliance statements
-- this module
hwRsvpTeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement. Note that the im-
plementation of this module requires implemen-
tation of the Integrated Services MIB as well."
MODULE HUAWEI-RSVPTE-MIB
MANDATORY-GROUPS { hwRsvpTeSessionGroup, hwRsvpTeSenderGroup, hwRsvpTeResvGroup, hwRsvpTeIfGroup, hwRsvpTeNbrGroup,
hwRsvpTeFilterSpecGroup, hwRsvpTeRroGroup, hwRsvpTeEroGroup }
GROUP hwRsvpTeResvFwdGroup
DESCRIPTION
"The Reservation Requests table is appropriate
in implementations that store upstream reserva-
tion messages, but not appropriate in implemen-
tations which calculate them on each transmis-
sion."
GROUP hwRsvpTeMessageIdGroup
DESCRIPTION
"This is optional."
::= { hwRsvpTeCompliances 1 }
END
--
-- HUAWEI-RSVPTE-MIB.mib
--
Reference in New Issue Copy Permalink