mibs/MIBS/ibm/IBM-ENETDISPATCHER-MIB

-- MIB created 5/06/99 21:05:56, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

IBM-ENETDISPATCHER-MIB DEFINITIONS ::= BEGIN

-- From file: "ibmenetd.mi2"
-- Compile options "G A T M"

IMPORTS
    Counter32, Gauge32, Integer32, IpAddress, enterprises
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215
    DisplayString, TruthValue
            FROM SNMPv2-TC-v1;

dispatcherMib OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmENetDispatcher(144) 1 }
-- MODULE-IDENTITY
--  LastUpdated
--    9808140000Z
--  OrgName
--    IBM Internet Software
--  ContactInfo
--            Mr. Dana R. Thalheimer
--     Postal: IBM Networking Software
--             Dept HLGA/Bldg 502
--             PO Box 12195
--             4205 S. Miami Blvd.
--             Research Triangle Park, NC 27709
--    
--             Mr. Chris Gage
--     Postal: IBM Networking Software
--             Dept HLGA/Bldg 502
--             PO Box 12195
--             4205 S. Miami Blvd.
--             Research Triangle Park, NC 27709
--  Descr
--    This MIB module contains traps and operational information
--     for the IBM eNetworkDispatcher.
--  RevDate
--    9711150000Z
--  RevDescr
--    The initial revision of this MIB module. 

dispatcherMibTraps OBJECT IDENTIFIER ::= { dispatcherMib 0 }
dispatcherMibAdmin OBJECT IDENTIFIER ::= { dispatcherMib 1 }
dispatcherMibObjects OBJECT IDENTIFIER ::= { dispatcherMib 2 }
dispatcherMibConformance OBJECT IDENTIFIER ::= { dispatcherMib 3 }
indStatus       OBJECT IDENTIFIER ::= { dispatcherMibObjects 1 }
indConfig       OBJECT IDENTIFIER ::= { dispatcherMibObjects 2 }
indExecStatObjects OBJECT IDENTIFIER ::= { indStatus 1 }
indHiAvailStatObjects OBJECT IDENTIFIER ::= { indStatus 6 }
indExecCnfgObjects OBJECT IDENTIFIER ::= { indConfig 1 }
indClstrCnfgTable OBJECT IDENTIFIER ::= { indConfig 2 }
indPortCnfgTable OBJECT IDENTIFIER ::= { indConfig 3 }
indSrvrCnfgTable OBJECT IDENTIFIER ::= { indConfig 4 }
indHiAvailCnfgObjects OBJECT IDENTIFIER ::= { indConfig 6 }
indReachCnfgTable OBJECT IDENTIFIER ::= { indConfig 7 }
indMngrCnfgObjects OBJECT IDENTIFIER ::= { indConfig 10 }
indMibCompliances OBJECT IDENTIFIER ::= { dispatcherMibConformance 1 }
indMibGroups    OBJECT IDENTIFIER ::= { dispatcherMibConformance 2 }
indMibStatGroups OBJECT IDENTIFIER ::= { indMibGroups 1 }
indMibCnfgGroups OBJECT IDENTIFIER ::= { indMibGroups 2 }

Percentages ::= Integer32(0..100)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Number from 0 to 100 representing the percentages of
--     the given object.

GaugeNeg1 ::= Integer32(-1..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Number with Gauge32 behavior, with the additional feature
--     that the value can go to negative 1.

esNonForAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Non forwarding address, any packet sent to this
         address will be handled by the Network Dispatcher
         machine itself and will not be forwarded"
    ::= { indExecStatObjects 1 }

esVersion OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The version of the executor"
    ::= { indExecStatObjects 2 }

esNumClust OBJECT-TYPE
    SYNTAX Gauge32
--  Units
--    clusters
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current number of clusters"
    ::= { indExecStatObjects 3 }

esTotalPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets received
         by the executor since it started."
    ::= { indExecStatObjects 4 }

esTooShortPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets discarded by the executor,
         since the executor started, because the packet
         headers were too short."
    ::= { indExecStatObjects 5 }

esNonForPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets sent to the non forwarding address
         since the executor started."
    ::= { indExecStatObjects 6 }

esClstrDscrdPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets discarded by the executor
        since the executor started, which were forwarded to
        a cluster, but were discarded because either:
           -the port did not exist, or
           -the port existed but had no servers"
    ::= { indExecStatObjects 7 }

esClstrErrPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets not sent, since the
         executor started, because of a network adapter
         failure"
    ::= { indExecStatObjects 8 }

esClstrLocalPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets since the executor started,
         not for the non forwarding address, or any cluster,
         but to be processed locally, by the Network
         Dispatcher machine"
    ::= { indExecStatObjects 9 }

esClstrOwnAddrPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets since the executor
         started, explicitly forwarded to a server
         located on the Network Dispatcher machine"
    ::= { indExecStatObjects 10 }

esClstrForPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets since the executor
         started, forwarded to any cluster"
    ::= { indExecStatObjects 11 }

esForErrPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets with forwarding errors
        since the executor started.  The following are
        the scenarios which affect this counter:
          -There was an error extracting an encapsulated
           packet which came in from a wide area Network
           Dispatcher
          -An attempt to forward the packet to either a
           local or remote server failed."
    ::= { indExecStatObjects 12 }

esNotClstrPkts OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    packets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets not addressed to
         any active cluster and port, since the executor
         started"
    ::= { indExecStatObjects 13 }

esHashBkts OBJECT-TYPE
    SYNTAX Gauge32
--  Units
--    hash Buckets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current number of occupied hash buckets.  Hash buckets
         correspond to IP address/port pairs.  If this number
         is very low, it may indicate that the servers are getting
         many hits from a small number of clients.  This number
         gives an indication of the client pool diversity."
    ::= { indExecStatObjects 14 }

esStartTime OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    seconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time when the executor was started,
         in seconds from January 1, 1970"
    ::= { indExecStatObjects 15 }

indClstrStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndClstrStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of cluster table entries.  The number of entries
        should equal the current number of clusters, esNumClust.
        The cluster table has a row for each cluster,  Each row
        has information about the current status of that cluster."
    ::= { indStatus 2 }

indClstrStatEntry OBJECT-TYPE
    SYNTAX IndClstrStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A cluster table entry describing current status of the cluster.
         The cluster table has a row for each cluster.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { csAddr }
    ::= { indClstrStatTable 1 }

IndClstrStatEntry ::= SEQUENCE {
    csAddr IpAddress,
    csNumPorts Gauge32,
    csActiveSYNs Counter32,
    csDroppedFINs Counter32,
    csDroppedACKs Counter32,
    csDroppedRSTs Counter32,
    csDroppedPKTs Counter32,
    csNonExistingPKTs Counter32
    }

csAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The cluster address in dotted decimal format"
    ::= { indClstrStatEntry 1 }

csNumPorts OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current number of ports for this cluster"
    ::= { indClstrStatEntry 2 }

csActiveSYNs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "TH_SYNs on active connection.  This variable indicates the
         number of requests for new connections, where those new
         connections are the same as current active connections,
         those not in FIN state.
        
         A high rate of growth in this variable could indicate
         slow or no response from servers in this cluster."
    ::= { indClstrStatEntry 3 }

csDroppedFINs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "FINs dropped due to no connection.  Rapid increase in this
         variable could indicate that the staletimeout is too low.
         Any percentage greater than 1% of total packets forwarded
         could indicate a problem."
    ::= { indClstrStatEntry 4 }

csDroppedACKs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "ACKSs dropped due to no connection.  Rapid increase in this
         variable could indicate that the staletimeout is too low.
         Any percentage greater than 1% of total packets forwarded
         could indicate a problem."
    ::= { indClstrStatEntry 5 }

csDroppedRSTs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "RSTs dropped due to no connection.  Rapid increase in this
         variable could indicate that the staletimeout is too low.
         Any percentage greater than 1% of total packets forwarded
         could indicate a problem."
    ::= { indClstrStatEntry 6 }

csDroppedPKTs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "PKTSs dropped due to no connection.  Rapid increase in this
         variable could indicate that the staletimeout is too low.
         Any percentage greater than 1% of total packets forwarded
         could indicate a problem."
    ::= { indClstrStatEntry 7 }

csNonExistingPKTs OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "This variable has no meaning and is deprecated"
    ::= { indClstrStatEntry 8 }

indPortStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndPortStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of port table entries.  The number of entries
        equals the sum of the number of ports for each cluster.
        Each row in the table provides current status information
        for a port."
    ::= { indStatus 3 }

indPortStatEntry OBJECT-TYPE
    SYNTAX IndPortStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A port entry describing current status of the port.  The port
         table has an entry for each cluster, port combination.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { csAddr, psNum }
    ::= { indPortStatTable 1 }

IndPortStatEntry ::= SEQUENCE {
    psNum Integer32,
    psNumServers Gauge32,
    psNumNodesDown Gauge32
    }

psNum OBJECT-TYPE
    SYNTAX Integer32(0..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Number of this port"
    ::= { indPortStatEntry 1 }

psNumServers OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current number of servers on this port"
    ::= { indPortStatEntry 2 }

psNumNodesDown OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of down servers"
    ::= { indPortStatEntry 3 }

indSrvrStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndSrvrStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of server table entries.  The number of entries
        equals the sum of the number of servers for each port.
        Each server table entry provides current status
        information about the port."
    ::= { indStatus 4 }

indSrvrStatEntry OBJECT-TYPE
    SYNTAX IndSrvrStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A server entry describing current status of the server.  There is
         a row in the server table for each cluster, port, server combination.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { csAddr, psNum, ssAddr }
    ::= { indSrvrStatTable 1 }

IndSrvrStatEntry ::= SEQUENCE {
    ssAddr IpAddress,
    ssActiveConns Gauge32,
    ssNewConns Gauge32,
    ssTotalConns Counter32,
    ssTotalTcpConns Counter32,
    ssTotalUdpConns Counter32,
    ssFinConns Gauge32,
    ssCompleteConns Counter32,
    ssWeight GaugeNeg1,
    ssSavedWeight GaugeNeg1,
    ssPortLoad GaugeNeg1,
    ssSystemLoad Integer32,
    ssActiveConnsWeight Integer32,
    ssNewConnsWeight Integer32,
    ssPortLoadWeight Integer32,
    ssSystemLoadWeight Integer32
    }

ssAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Server address in dotted decimal notation"
    ::= { indSrvrStatEntry 1 }

ssActiveConns OBJECT-TYPE
    SYNTAX Gauge32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current active connections for this server"
    ::= { indSrvrStatEntry 2 }

ssNewConns OBJECT-TYPE
    SYNTAX Gauge32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Change in the number of total connections over the
         last interval."
    ::= { indSrvrStatEntry 3 }

ssTotalConns OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total connections for this server, since the server
         was added to the currently running executor"
    ::= { indSrvrStatEntry 4 }

ssTotalTcpConns OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total TCP connections for this server, since the server
         was added to the currently running executor.
        
         ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
    ::= { indSrvrStatEntry 5 }

ssTotalUdpConns OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total UDP connections for this server, since the server
         was added to the currently running executor.
        
         ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
    ::= { indSrvrStatEntry 6 }

ssFinConns OBJECT-TYPE
    SYNTAX Gauge32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current number of connections in FIN state"
    ::= { indSrvrStatEntry 7 }

ssCompleteConns OBJECT-TYPE
    SYNTAX Counter32
--  Units
--    connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of completed connections for this server,
         since the server was added to the currently running
         executor."
    ::= { indSrvrStatEntry 8 }

ssWeight OBJECT-TYPE
    SYNTAX GaugeNeg1
--    Rsyntax Integer32(-1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current weight for this server.  When the weight is zero the
         executor will no longer forward packets to this server.  A
         weight of -1 indicates that the Network Dispatcher administrator
         has explicitly marked the server down."
    ::= { indSrvrStatEntry 9 }

ssSavedWeight OBJECT-TYPE
    SYNTAX GaugeNeg1
--    Rsyntax Integer32(-1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Weight the server had when marked down.  This weight will
         be restored when the server is marked up."
    ::= { indSrvrStatEntry 10 }

ssPortLoad OBJECT-TYPE
    SYNTAX GaugeNeg1
--    Rsyntax Integer32(-1..2147483647)
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of milliseconds an advisor took to complete a
         protocol specific request to the server.  If the value
         is -1, the advisor could not complete the request to
         the server."
    ::= { indSrvrStatEntry 11 }

ssSystemLoad OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This value is the number that the ISS agent provides
        to the ISS monitor for this server.
        
        The variable is only valid if ISS is monitoring an ISS
        agent on this server.  Otherwise, the value has no
        meaning."
    ::= { indSrvrStatEntry 12 }

ssActiveConnsWeight OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The weight calculated by the manager for the
        active connections measurement"
    ::= { indSrvrStatEntry 13 }

ssNewConnsWeight OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The weight calculated by the manager for the
        new connections measurement"
    ::= { indSrvrStatEntry 14 }

ssPortLoadWeight OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The weight calculated by the manager for the
         port load measurement"
    ::= { indSrvrStatEntry 15 }

ssSystemLoadWeight OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The weight calculated by the manager for the
         system load measurement"
    ::= { indSrvrStatEntry 16 }

indRulesStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndRulesStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of rule table entries.  There is no limit on the number
         of rules.  The number of entries is the same as the number of
         entries in the indRulesCnfgTable.  Each status entry provides
         current status information about the rule."
    ::= { indStatus 5 }

indRulesStatEntry OBJECT-TYPE
    SYNTAX IndRulesStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A rule table entry describing the current status of a rule.
         There is a one to one correspondence between rows of this
         table and rows in the IndRulesCnfgTable.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { csAddr, psNum, rcIndex }
-- Augments indRulesCnfgEntry
    ::= { indRulesStatTable 1 }

IndRulesStatEntry ::= SEQUENCE {
    rsTimesFired Counter32,
    rsNumSrvrs Gauge32
    }

rsTimesFired OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this rule has fired"
    ::= { indRulesStatEntry 2 }

rsNumSrvrs OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of servers which this rule services."
    ::= { indRulesStatEntry 3 }

hasPrimary OBJECT-TYPE
    SYNTAX INTEGER {
        primary(0),
        backup(1)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether this machine is the primary or backup machine.
            -primary (0)
            -backup (1)"
    ::= { indHiAvailStatObjects 1 }

hasPort OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Port used by both primary and backup Network Dispatcher machines for
         heartbeat messages."
    ::= { indHiAvailStatObjects 2 }

hasState OBJECT-TYPE
    SYNTAX INTEGER {
        idle(0),
        listen(1),
        active(2),
        standby(3),
        preempt(4),
        elect(5),
        noExec(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of this Network Dispatcher machine.
             -idle,   (0) this machine is routing packets and is not trying
                          to establish contact with its partner Network
                          Dispatcher
             -listen, (1) high availability has just started and
                          network dispatcher is listening for partner,
             -active, (2) this machine is routing packets.
             -standby,(3) this machine is monitoring the active machine.
             -preempt,(4) transitory state during switch from primary to backup
             -elect,  (5) network dispatcher is negotiating with partner
                          for who will primary or backup
             -no_exec,(6) the executor is not running"
    ::= { indHiAvailStatObjects 3 }

hasSubState OBJECT-TYPE
    SYNTAX INTEGER {
        notSynchronized(0),
        synchronized(1),
        syncIn(2),
        syncOut(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "High Availability sub state:
        
         Synchronized and notSynchronized are normal, synchIn and synchOut are
         transitory.  If the Network Dispatcher machine appears to be stuck
         (for more than a minute), in a transitory state then that indicates
         a problem.
        
         If HighAvailability should be running and the substate is notSynchronized,
         then that indicates a problem.
        
         If High Availability is not running and the hasState is idle, then
         all subState data is meaningless and should be ignored.
        
            notSynchronized (0), network dispatcher is not in conact with partner machine
            synchronized    (1), network dispatcher is in contact with partner machine
            sync-in         (2), network dispatcher is going into standby state
            sync-out        (3), network dispatcher is going into active state"
    ::= { indHiAvailStatObjects 4 }

indReachStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndReachStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of reach table entries. The number of entries
        is typically less than 10, with a maximum of 32."
    ::= { indStatus 7 }

indReachStatEntry OBJECT-TYPE
    SYNTAX IndReachStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A reach table entry includes the address being pinged, and whether
         the ping of that address was successful.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { rsAddr }
    ::= { indReachStatTable 1 }

IndReachStatEntry ::= SEQUENCE {
    rsAddr IpAddress,
    rsPingAble INTEGER
    }

rsAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The address the reach advisor pings."
    ::= { indReachStatEntry 1 }

rsPingAble OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        reachable(1),
        unreachable(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Whether this reach address (rsAddr) responded to a ping.
          unknown     (0), the rsAddr is unknown, possibly because the
                           reach advisor is not started.
          reachable   (1), the rsAddr was pinged successfully
          unreachable (2)  the rsAddr was not pinged successfully"
    ::= { indReachStatEntry 2 }

indRulesCnfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndRulesCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of rule config table entries  There is no limit
         to the number of rule entries.  Each rule table row
         describes rule configuration information."
    ::= { indConfig 5 }

indRulesCnfgEntry OBJECT-TYPE
    SYNTAX IndRulesCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A rule config table entry has information about the
        current configuration of the rule.
        
        Rows in this table can not be created or destroyed via SNMP commands."
    INDEX { csAddr, psNum, rcIndex }
    ::= { indRulesCnfgTable 1 }

IndRulesCnfgEntry ::= SEQUENCE {
    rcIndex Integer32,
    rcName DisplayString,
    rcType INTEGER,
    rcBeginRange Integer32,
    rcEndRange Integer32,
    rcPriority Integer32,
    rcSrvrList DisplayString
    }

rcIndex OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A unique number assigned to each rule in
         a cluster, port combination"
    ::= { indRulesCnfgEntry 1 }

rcName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The user defined name of the rule.  Rule names are
         not necessarily unique."
    ::= { indRulesCnfgEntry 2 }

rcType OBJECT-TYPE
    SYNTAX INTEGER {
        true(0),
        ip(1),
        port(2),
        time(3),
        connection(4),
        active(5)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of rule
             true       (0), rules of this type are always true
             ip         (1), the rule is based on the client IP address
             port       (2), the rule is based on the client port
             time       (3), the rule is based on the time of day
             connection (4), the rule is based on the number of
                             connections per second for the port
             active     (5)  the rule is based on the number total
                             active connections for the port"
    ::= { indRulesCnfgEntry 3 }

rcBeginRange OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The lower value in the range used to determine
         if the rule is true or not. The data is
         meaningless for rule type 0."
    ::= { indRulesCnfgEntry 4 }

rcEndRange OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The higher value in the range used to determine
         if the rule is true or not.  The data is
         meaningless for rule type 0."
    ::= { indRulesCnfgEntry 5 }

rcPriority OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The rule priority.  Lower numbers are a
         higher priority. Rule priority determines
         the order in which rules are evaluated."
    ::= { indRulesCnfgEntry 6 }

rcSrvrList OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of servers this rule services.  The server addresses
         are represented as strings in dotted decimal notation, separated
         by plus signs.  For example, 37.44.24.13+12.23.54.76+9.67.127.82"
    ::= { indRulesCnfgEntry 7 }

indHrtBeatCnfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndHrtBeatCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of heartBeat Table entries.  The number
         of entries is usually less than the number of
         interface cards in the Network Dispatcher machine.
         The maximum is 32.
        
         The heart beat table lists each of the monitoring
         and responding heartbeat pairs."
    ::= { indConfig 8 }

indHrtBeatCnfgEntry OBJECT-TYPE
    SYNTAX IndHrtBeatCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A indHrtBeatCnfg entry describing the monitoring
         and responding addresses.  Each heart beat source address
         and heart beat destination address pair is unique.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { hbcSrcAddr, hbcDestAddr }
    ::= { indHrtBeatCnfgTable 1 }

IndHrtBeatCnfgEntry ::= SEQUENCE {
    hbcSrcAddr IpAddress,
    hbcDestAddr IpAddress,
    hbcNumber Integer32
    }

hbcSrcAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Address from which Network Dispatcher machine issues heartbeat
         monitoring to its partner"
    ::= { indHrtBeatCnfgEntry 1 }

hbcDestAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Address of Network Dispatcher machine who's status is being monitored."
    ::= { indHrtBeatCnfgEntry 2 }

hbcNumber OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An integer number assigned to the heart beat pair."
    ::= { indHrtBeatCnfgEntry 3 }

indAdvsrCnfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndAdvsrCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of advisor config table entries.  The number of entries
        equals the number of ports times the number of advisors.  Each
        advisor table row describes the current status of the advisor,
        port combination."
    ::= { indConfig 9 }

indAdvsrCnfgEntry OBJECT-TYPE
    SYNTAX IndAdvsrCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An advisor entry describing current configuration of the Advisor.  There is
         an advisor table entry for each advisor, port combination.
        
         Rows in this table can not be created or deleted via SNMP commands"
    INDEX { acPort }
    ::= { indAdvsrCnfgTable 1 }

IndAdvsrCnfgEntry ::= SEQUENCE {
    acPort Integer32,
    acName DisplayString,
    acVersion DisplayString
    }

acPort OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Number of the port that the advisor is monitoring"
    ::= { indAdvsrCnfgEntry 1 }

acName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Name of the advisor.  Some of the possible values are:
         FTP, HTTP, NNTP, POP3,  SMTP, SSL, Telnet.  and custom
         advisor names."
    ::= { indAdvsrCnfgEntry 2 }

acVersion OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current version of the advisor"
    ::= { indAdvsrCnfgEntry 3 }

mcInterval OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "How often the manager will update server
         weights, in seconds."
    ::= { indMngrCnfgObjects 1 }

mcRefresh OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
--  Units
--    mngrIntervals
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number of manager intervals (mcInterval) before
         querying the executor for a refresh of information
         about new and active connections"
    ::= { indMngrCnfgObjects 2 }

mcActiveProp OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number from 0 to 100 representing the relative importance
         of active connections.  This number is used by the manager,
         in calculating server weights.
        
         The sum of mcActiveProp, mcNewProp, mcPortProp, and
         mcSystemProp, must be 100"
    ::= { indMngrCnfgObjects 3 }

mcNewProp OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number from 0 to 100 representing the relative importance
         of new connections.  This number is used by the manager,
         in calculating server weights.
        
         The sum of mcActiveProp, mcNewProp, mcPortProp, and
         mcSystemProp, must be 100"
    ::= { indMngrCnfgObjects 4 }

mcPortProp OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number from 0 to 100 representing the relative importance
         of port advisor information.  This number is used by the
          manager, in calculating server weights.
        
         The sum of mcActiveProp, mcNewProp, mcPortProp, and
         mcSystemProp, must be 100"
    ::= { indMngrCnfgObjects 5 }

mcSystemProp OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number from 0 to 100 representing the relative importance
         of the information from system metrics, such as ISS.  This
         number is used by the manager, in calculating server weights.
        
         The sum of mcActiveProp, mcNewProp, mcPortProp, and
         mcSystemProp, must be 100"
    ::= { indMngrCnfgObjects 6 }

mcSensitivity OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Minimum sensitivity to weight updates.  This setting defines
         when the manager should change its weighting for the server
         based on external information"
    ::= { indMngrCnfgObjects 7 }

mcSmoothing OBJECT-TYPE
    SYNTAX Percentages
--    Rsyntax Integer32(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Index that smoothes the variations in weight when load balancing.
         Smoothing can reduce the changes in weights from interval to
         interval.  The higher the smoothing value the less the weight will
         change from interval to interval.  1.5 is a typical value.  4, for
         example, is a high smoothhing value and would reduce the change in
         weight from interval to interval to almost nothing.
        
         The value is a percentage.  For example a value of 155 should be
         treated as 1.55 by managing applications."
    ::= { indMngrCnfgObjects 8 }

mcVersion OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The version of the manager"
    ::= { indMngrCnfgObjects 9 }

indAllSrvrsCnfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IndAllSrvrsCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of all servers table entries.  The number of entries
        equals the number of different servers configured."
    ::= { indConfig 11 }

indAllSrvrsCnfgEntry OBJECT-TYPE
    SYNTAX IndAllSrvrsCnfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An all servers table entry describing operational aspects of
         servers.  This table is a list of all the servers currently
         configured in Network Dispatcher.
        
         Rows in this table can not be created or deleted via SNMP"
    INDEX { ascAddr }
    ::= { indAllSrvrsCnfgTable 1 }

IndAllSrvrsCnfgEntry ::= SEQUENCE {
    ascAddr IpAddress,
    ascQuiesced TruthValue,
    ascInstances Gauge32
    }

ascAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The IP Address of the server in dotted decimal format"
    ::= { indAllSrvrsCnfgEntry 1 }

ascQuiesced OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "True if this server has been quiesced, false otherwise.
         When a server is quiesced, no more connections are sent
         to the server.  A server can be quiesced via the
         ndcontrol manager quiesce command.
        
         True=1, False=2."
    ::= { indAllSrvrsCnfgEntry 2 }

ascInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The current number of times this server, ascAddr, is in the
         configuration."
    ::= { indAllSrvrsCnfgEntry 3 }

indHighAvailStatus TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE dispatcherMib
    VARIABLES {
        hasState }
--  Status
--    mandatory
    DESCRIPTION
        "This trap announces that the value of the high availability
         status state (hasState) variable has changed.  The possible
         values of hasState and their respective meanings are:
          -idle,   (0) this machine is routing packets and is not trying
                       to establish contact with its partner Network
                       Dispatcher
          -listen, (1) high availability has just started and
                       network dispatcher is listening for partner,
          -active, (2) this machine is routing packets.
          -standby,(3) this machine is monitoring the active machine.
          -preempt,(4) transitory state during switch from primary to backup
          -elect,  (5) network dispatcher is negotiating with partner
                       for who will primary or backup
          -no_exec,(6) the executor is not running"
    ::= 1

indSrvrGoneDown TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE dispatcherMib
    VARIABLES {
        ssActiveConns }
--  Status
--    mandatory
    DESCRIPTION
        "This trap announces that the weight for the server specified
         by the csAddr, psNum, ssAddr portion of the Object Identifier
         has gone to zero, The last known number of active connections
         for the server is sent in the trap.
        
         This trap indicates that, as far as Network Dispatcher can
         determine, the specified server has gone down."
    ::= 2

indMibExecStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    esNonForAddr, esVersion, esNumClust, esTotalPkts, 
--    esTooShortPkts, esNonForPkts, esClstrDscrdPkts, 
--    esClstrErrPkts, esClstrLocalPkts, esClstrOwnAddrPkts, 
--    esClstrForPkts, esForErrPkts, esNotClstrPkts, esHashBkts, 
--    esStartTime

indMibClstrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    csNumPorts, csActiveSYNs, csDroppedFINs, csDroppedACKs, 
--    csDroppedRSTs, csDroppedPKTs, csNonExistingPKTs

indMibPortStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    psNumServers, psNumNodesDown

indMibSrvrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    ssActiveConns, ssNewConns, ssTotalConns, ssTotalTcpConns, 
--    ssTotalUdpConns, ssFinConns, ssCompleteConns, ssWeight, 
--    ssSavedWeight, ssPortLoad, ssSystemLoad, ssActiveConnsWeight, 
--    ssNewConnsWeight, ssPortLoadWeight, ssSystemLoadWeight

indMibRulesStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    rsTimesFired, rsNumSrvrs

indMibHiAvailStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    hasPrimary, hasPort, hasState, hasSubState

indMibReachStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    rsPingAble

indMibRulesCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    rcName, rcType, rcBeginRange, rcEndRange, rcPriority, 
--    rcSrvrList

indMibHrtBeatCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    hbcNumber

indMibAdvsrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 9 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    acName, acVersion

indMibMngrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 10 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    mcInterval, mcRefresh, mcActiveProp, mcNewProp, mcPortProp, 
--    mcSystemProp, mcSensitivity, mcSmoothing, mcVersion

indMibAllSrvrsCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 11 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    ...
--  objects
--    ascQuiesced, ascInstances

indMibCompliance OBJECT IDENTIFIER ::= { indMibCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the Dispatcher MIB module.
--  Module
--    >>current<<
--   MandGroup
--    indMibExecStatGroup
--   MandGroup
--    indMibClstrStatGroup
--   MandGroup
--    indMibPortStatGroup
--   MandGroup
--    indMibSrvrStatGroup


END