mibs/MIBS/ibm/IBMESCONCUB-MIB

456 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- MIB created 12/11/98 18:26:10, by
-- SMIC (the next generation) version 1.6.29, November 22, 1994.
IBMESCONCUB-MIB DEFINITIONS ::= BEGIN
-- From file: "ibmesconcub.mi2"
-- Compile options "G A T M"
IMPORTS
enterprises, Counter32, Integer32, IpAddress
FROM SNMPv2-SMI-v1
OBJECT-TYPE
FROM RFC-1212
MacAddress
FROM SNMPv2-TC-v1
ifIndex
FROM RFC1213-MIB;
ibmIROCescon OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmIROC(119) ibmIROCrouting(4) 14 }
-- MODULE-IDENTITY
-- LastUpdated
-- 9810221200Z
-- OrgName
-- IBM
-- ContactInfo
-- Randy Worzella
-- IBM Corporation
-- 800 Park Offices Drive
-- V28A/664
-- P.O. Box 12195
-- Research Triangle Park, NC 27709, USA
-- Tel: 1 919 254 2202
-- E-mail: worzella@us.ibm.com
-- Descr
-- MIB for managing activity on an ESCON channel from its
-- secondary end.
--
-- New capabilities provided by the ESCON adapter microcode
-- required a change in table indexing. Therefore, this new
-- MIB has been created and is based on the architecture
-- MIB defined in ibmescon.txt.
--
-- 'ESCON' is a trademark of the IBM Corporation.
esconPortData OBJECT IDENTIFIER ::= { ibmIROCescon 1 }
esconLinkData OBJECT IDENTIFIER ::= { ibmIROCescon 2 }
esconStationData OBJECT IDENTIFIER ::= { ibmIROCescon 3 }
esconConformance OBJECT IDENTIFIER ::= { ibmIROCescon 4 }
esconPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsconPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel port."
::= { esconPortData 1 }
esconPortEntry OBJECT-TYPE
SYNTAX EsconPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel port. This
table is indexed by ifIndex from MIB-II."
INDEX { ifIndex }
::= { esconPortTable 1 }
EsconPortEntry ::= SEQUENCE {
esconPortInFiberStatus INTEGER,
esconPortOutFiberStatus INTEGER
}
esconPortInFiberStatus OBJECT-TYPE
SYNTAX INTEGER {
inLoff(1),
inOls(2),
inIdle(3),
inUnknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the fiber into this device from the host:
inLoff = the light is off on the fiber into
this device from the host
inOls = the fiber into this device from the
host is in an intermediate state between
light-off and light-on
inIdle = the fiber into this device from the
host is in the light-on state, and is
ready to transfer data from the host to
this device
inUnknown = the agent cannot determine the status of
the fiber into this device from the host"
::= { esconPortEntry 1 }
esconPortOutFiberStatus OBJECT-TYPE
SYNTAX INTEGER {
outDisableReq(1),
outDisableForced(2),
outLoffForced(3),
outOls(4),
outOlsForced(5),
outEnable(6),
outError(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the fiber out of this device to the host:
outDisableReq = out disable obtained; the fiber
out of this device into the host
is not in the light-on state
outDisableForced = out ESCON emits OLS; the fiber
out of this device into the host
is not in the light-on state
outLoffForced = out ESCON forced light-off; the fiber
out of this device into the host
is not in the light-on state
outOls = the fiber out of this device into the
host is in an intermediate state
between light-off and light-on
outOlsforced = out ESCON forced OLS; the fiber
out of this device into the host
is not in the light-on state
outEnable = the fiber out of this device into the
host is in the light-on state, and is
ready to transfer data from this
device to the host
outError = the status of the fiber out of this
device to the host is none of those
listed above. This is a state that
should not occur"
::= { esconPortEntry 2 }
esconLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsconLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel link."
::= { esconLinkData 1 }
esconLinkEntry OBJECT-TYPE
SYNTAX EsconLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel link. This
table is indexed by ifIndex from MIB-II, by host link address,
(host) control unit address, and by (host) partition number."
INDEX { ifIndex, esconLinkHostLinkAddress, esconLinkControlUnitAddress, esconLinkPartitionNumber }
::= { esconLinkTable 1 }
EsconLinkEntry ::= SEQUENCE {
esconLinkHostLinkAddress OCTET STRING,
esconLinkControlUnitAddress OCTET STRING,
esconLinkPartitionNumber OCTET STRING,
esconLinkStatus INTEGER
}
esconLinkHostLinkAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This address identifies the ESCON Director port to which the
optical fiber between the ESCON Director and the host is
attached."
::= { esconLinkEntry 1 }
esconLinkControlUnitAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A number identifying a logical control unit within an actual host."
::= { esconLinkEntry 2 }
esconLinkPartitionNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A number identifying a logical host within an actual host."
::= { esconLinkEntry 3 }
esconLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
hlpNotEstab(1),
hlpEstab(2),
hlpError(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gives the status of the link:
hlpNotEstab = Host Logical Path not established
hlpEstab = Host Logical Path established
hlpError = Host Logical Path error"
::= { esconLinkEntry 4 }
esconStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF EsconStationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel station."
::= { esconStationData 1 }
esconStationEntry OBJECT-TYPE
SYNTAX EsconStationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of objects that describe an ESCON channel station. This
table is indexed by ifIndex from MIB-II, by host link address,
by (host) control unit address, by (host) partition number, and
by ESCON device address."
INDEX { ifIndex, esconStationHostLinkAddress, esconStationControlUnitAddress, esconStationPartitionNumber, esconStationDeviceAddress }
::= { esconStationTable 1 }
EsconStationEntry ::= SEQUENCE {
esconStationHostLinkAddress OCTET STRING,
esconStationControlUnitAddress OCTET STRING,
esconStationPartitionNumber OCTET STRING,
esconStationDeviceAddress OCTET STRING,
esconStationState INTEGER,
esconStationAttentionDelay INTEGER,
esconStationAttentionTimeOut INTEGER,
esconStationMaxBfru INTEGER,
esconStationUnitSize INTEGER,
esconStationMaxMsgSizeReceived INTEGER,
esconStationMaxMsgSizeSent INTEGER,
esconStationDataPacketsOkReceived Counter32,
esconStationDataPacketsKoReceived Counter32,
esconStationDataPacketsSent Counter32,
esconStationTotalFramesSent Counter32,
esconStationDataPacketsRetransmitted Counter32,
esconStationPositiveAckDataPackets Counter32,
esconStationSecondChanceAttentions Counter32,
esconStationCommandsRetried Counter32
}
esconStationHostLinkAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This address identifies the ESCON Director port to which the
optical fiber between the ESCON Director and the host is
attached."
::= { esconStationEntry 1 }
esconStationControlUnitAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A number identifying a logical control unit within an actual host."
::= { esconStationEntry 2 }
esconStationPartitionNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A number identifying a logical host within an actual host."
::= { esconStationEntry 3 }
esconStationDeviceAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique hexadecimal number allocated to each station on the
same host link."
::= { esconStationEntry 4 }
esconStationState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
cpDefined(2),
cpReset(3),
cpActive(4),
cpDelete(5),
cpAbend(6),
cldpWait(7),
cldpDefinedl(8),
cldpError(9),
cldpLoad(10),
cldpDump(11),
deletePending(12),
deleted(13),
cpXidExpected(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the station."
::= { esconStationEntry 5 }
esconStationAttentionDelay OBJECT-TYPE
SYNTAX INTEGER(0..420)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the amount of time in seconds that elapses
from the receipt of a packet at an ESCON station (when
no other packets are queued) before that station sends
buffered data to the Host.
An update to this object takes effect the next time the station
establishes communications with the host."
::= { esconStationEntry 6 }
esconStationAttentionTimeOut OBJECT-TYPE
SYNTAX INTEGER(10..840)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the amount of time in seconds that the station is to
wait for a response to an attention signal it sent to the host
before initiating channel disconnect.
An update to this object takes effect the next time the station
establishes communications with the host."
::= { esconStationEntry 7 }
esconStationMaxBfru OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of buffers in the host buffer pool for receiving data
from this station."
::= { esconStationEntry 8 }
esconStationUnitSize OBJECT-TYPE
SYNTAX INTEGER(64..4000)
-- Units
-- bytes
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum size of a buffer, in bytes, that the host can receive
from this station."
::= { esconStationEntry 9 }
esconStationMaxMsgSizeReceived OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum length of a message that can be received on this
station.
An update to this object takes effect the next time the station
establishes communications with the host."
::= { esconStationEntry 10 }
esconStationMaxMsgSizeSent OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum length of a message that can be sent from this
station to the host.
An update to this object takes effect the next time the station
establishes communications with the host."
::= { esconStationEntry 11 }
esconStationDataPacketsOkReceived OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets received from the host by this
station without Data Check."
::= { esconStationEntry 12 }
esconStationDataPacketsKoReceived OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets received from the host by this station
with Data Check."
::= { esconStationEntry 13 }
esconStationDataPacketsSent OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets sent to the host by this station."
::= { esconStationEntry 14 }
esconStationTotalFramesSent OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets and control packets sent to the host
by this station."
::= { esconStationEntry 15 }
esconStationDataPacketsRetransmitted OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets retransmitted by this station"
::= { esconStationEntry 16 }
esconStationPositiveAckDataPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of data packets sent by this station to the host that
the host has positively acknowledged. When the host sends a
positive acknowledgement for a group of n data packets, this
counter is incremented by n."
::= { esconStationEntry 17 }
esconStationSecondChanceAttentions OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this station has sent a Second Chance
Attention signal to the host."
::= { esconStationEntry 18 }
esconStationCommandsRetried OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times a command has been retried on this
station"
::= { esconStationEntry 19 }
END