david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/infinera/LUM-IFOTNMON-MIB

1861 lines
54 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
LUM-IFOTNMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
DateAndTime
FROM SNMPv2-TC
lumModules, lumIfOtnMonMIB
FROM LUM-REG
SignalStatusWithNA, FaultStatusWithNA, DisplayStringWithNA, MgmtNameString,
Unsigned32WithNA, TruthValueWithNA, TcmMode, TcmNumber, OtnTIMDetModeWithNA,
EnabledDisabledWithNA, OtnAlarmMode, OtnTypeWithNA, OtnDirectionWithNA
FROM LUM-TC;
lumIfOtnMonMIBModule MODULE-IDENTITY
LAST-UPDATED
"201706220000Z" -- June 22nd 2017
ORGANIZATION
"Infinera Corporation"
CONTACT-INFO
"techsupport@infinera.com"
DESCRIPTION
"The MIB module for management of OTN monitor objects (SM, TCM, PM
and trace objects).
This module describes the SM, TCM and PM in ITU-T Recommendation
G.709.
The references refers to the following:
G.709/Y.1331 (03/2003)
G.798 (06/2004)
G.806 (03/2006)
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The sm group contains information and configuration for the SM
section objects.
(3) The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects.
(4) The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects.
(5) The trace group contains information and configuration for the
trace objects defined in G.709.
"
REVISION
"201706220000Z" -- June 22nd 2017
DESCRIPTION
"Changes made for release r29.0:
- Enabled SNMP-write for operator specific transmitted mon-trace.
- Corrected SNMP Mon-trace values when N/A.
- Changed ORGANIZATION and CONTACT-INFO"
REVISION
"201611300000Z" -- November 30th 2016
DESCRIPTION
"Changes made for release r28:
- Added tp100gotnii board."
REVISION
"201611040000Z" -- November 4th 2016
DESCRIPTION
"Changes made for patch release r27.0.3:
- Enabled Read-Write to Loopback and TTI attributes via SNMP."
REVISION
"201505290000Z" -- May 29th 2015
DESCRIPTION
"Changes made for release r25:
- "
REVISION
"201409300000Z" -- September 30th 2014
DESCRIPTION
"Changes made for release r23.1:
- Added mxp100gotn board."
REVISION
"201405160000Z" -- May 16th 2014
DESCRIPTION
"Changes made for release r23:
- Added TcmSwitchCriteria object.
- Changed board name from tp10gotn to tphex10gotn."
REVISION
"201311150000Z" -- November 15th 2013
DESCRIPTION
"Changes made for release r22:
- Added tp10gotn, tp100gotn board."
REVISION
"201305010000Z" -- May 1st 2013
DESCRIPTION
"The initial revision of this module."
::= { lumModules 55 }
-- ----------------------------------------------------
-- Compliance area, containing groups and compliance
-- specifications.
-- ----------------------------------------------------
lumIfOtnMonConfs OBJECT IDENTIFIER ::= { lumIfOtnMonMIB 1 }
lumIfOtnMonGroups OBJECT IDENTIFIER ::= { lumIfOtnMonConfs 1 }
lumIfOtnMonCompl OBJECT IDENTIFIER ::= { lumIfOtnMonConfs 2 }
-- ----------------------------------------------------
-- Root for objects in the IFOTN MIB
-- ----------------------------------------------------
lumIfOtnMonMIBObjects OBJECT IDENTIFIER ::= { lumIfOtnMonMIB 2 }
-- ----------------------------------------------------
-- This MIB contains the following groups:
-- ----------------------------------------------------
ifOtnMonGeneral OBJECT IDENTIFIER ::= { lumIfOtnMonMIBObjects 1 }
ifOtnMonSmList OBJECT IDENTIFIER ::= { lumIfOtnMonMIBObjects 2 }
ifOtnMonTcmList OBJECT IDENTIFIER ::= { lumIfOtnMonMIBObjects 3 }
ifOtnMonPmList OBJECT IDENTIFIER ::= { lumIfOtnMonMIBObjects 4 }
ifOtnMonTraceList OBJECT IDENTIFIER ::= { lumIfOtnMonMIBObjects 5 }
-- ----------------------------------------------------
-- General group
-- ----------------------------------------------------
ifOtnMonGeneralConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the MIB was
last changed.
"
::= { ifOtnMonGeneral 1 }
ifOtnMonGeneralStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state of the MIB was last
changed.
"
::= { ifOtnMonGeneral 2 }
ifOtnMonGeneralIfOtnMonSmTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of SM table.
"
::= { ifOtnMonGeneral 3 }
ifOtnMonGeneralIfOtnMonSmConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifOtnMonGeneral 4 }
ifOtnMonGeneralIfOtnMonSmStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
table was last changed.
"
::= { ifOtnMonGeneral 5 }
ifOtnMonGeneralIfOtnMonTcmTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of otn tcm table
"
::= { ifOtnMonGeneral 6 }
ifOtnMonGeneralIfOtnMonTcmConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifOtnMonGeneral 7 }
ifOtnMonGeneralIfOtnMonTcmStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
table was last changed.
"
::= { ifOtnMonGeneral 8 }
ifOtnMonGeneralIfOtnMonPmTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of otn pm table
"
::= { ifOtnMonGeneral 9 }
ifOtnMonGeneralIfOtnMonPmConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifOtnMonGeneral 10 }
ifOtnMonGeneralIfOtnMonPmStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
table was last changed.
"
::= { ifOtnMonGeneral 11 }
ifOtnMonGeneralIfOtnMonTraceTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of otn trace table
"
::= { ifOtnMonGeneral 12 }
ifOtnMonGeneralIfOtnMonTraceConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifOtnMonGeneral 13 }
ifOtnMonGeneralIfOtnMonTraceStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the table
was last changed.
"
::= { ifOtnMonGeneral 14 }
-- ----------------------------------------------------
-- SM group
-- ----------------------------------------------------
ifOtnMonSmTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfOtnMonSmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SM group contains information and configuration for
the SM section objects."
::= { ifOtnMonSmList 1 }
ifOtnMonSmEntry OBJECT-TYPE
SYNTAX IfOtnMonSmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifOtnMon SM list.
"
INDEX { ifOtnMonSmIndex }
::= { ifOtnMonSmTable 1 }
IfOtnMonSmEntry ::=
SEQUENCE {
ifOtnMonSmIndex Unsigned32,
ifOtnMonSmName MgmtNameString,
ifOtnMonSmConnIfBasicIfIndex Unsigned32WithNA,
ifOtnMonSmTxSignalStatus SignalStatusWithNA,
ifOtnMonSmRxSignalStatus SignalStatusWithNA,
ifOtnMonSmBackwardDefectIndication FaultStatusWithNA,
ifOtnMonSmIncomingAlignmentError FaultStatusWithNA,
ifOtnMonSmBackwardIncomingAlignmentError FaultStatusWithNA }
ifOtnMonSmIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifOtnMonSmEntry 1 }
ifOtnMonSmName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the otn otu, for example 'otu:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers.
"
::= { ifOtnMonSmEntry 2 }
ifOtnMonSmConnIfBasicIfIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in ifBasicIf table
this object is related.
"
::= { ifOtnMonSmEntry 3 }
ifOtnMonSmTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonSmEntry 4 }
ifOtnMonSmRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonSmEntry 5 }
ifOtnMonSmBackwardDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backward defect indication (BDI).
Indicates if backward defect indication (BDI) alarm
exists or not.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
alarm: Backward defect indication (in wrapper) active.
ok: Backward defect indication (in wrapper) inactive.
"
::= { ifOtnMonSmEntry 6 }
ifOtnMonSmIncomingAlignmentError OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming alignment error (IAE).
Indicates an incoming frame alignment error.
Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798
A: Incoming frame alignment error (IAE) is active.
D: IAE is inactive.
"
::= { ifOtnMonSmEntry 7 }
ifOtnMonSmBackwardIncomingAlignmentError OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backward incoming alignment error (BIAE).
Indicates a backward incoming alignment error.
Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798
A: Backward incoming alignment error (BIAE) is active.
D: BIAE is inactive.
"
::= { ifOtnMonSmEntry 8 }
-- ----------------------------------------------------
-- Otn tcm group
-- ----------------------------------------------------
ifOtnMonTcmTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfOtnMonTcmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects."
::= { ifOtnMonTcmList 1 }
ifOtnMonTcmEntry OBJECT-TYPE
SYNTAX IfOtnMonTcmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifOtnMon tcm list.
"
INDEX { ifOtnMonTcmIndex }
::= { ifOtnMonTcmTable 1 }
IfOtnMonTcmEntry ::=
SEQUENCE {
ifOtnMonTcmIndex Unsigned32,
ifOtnMonTcmName MgmtNameString,
ifOtnMonTcmConnOduIndex Unsigned32WithNA,
ifOtnMonTcmAlarmMode OtnAlarmMode,
ifOtnMonTcmMode TcmMode,
ifOtnMonTcmTcmNumber TcmNumber,
ifOtnMonTcmTxSignalStatus SignalStatusWithNA,
ifOtnMonTcmRxSignalStatus SignalStatusWithNA,
ifOtnMonTcmBackwardDefectIndication FaultStatusWithNA,
ifOtnMonTcmBackwardIncomingAlignmentError FaultStatusWithNA,
ifOtnMonTcmRxAlarmIndicationSignal FaultStatusWithNA,
ifOtnMonTcmRxOpenConnectionIndication FaultStatusWithNA,
ifOtnMonTcmRxLockedDefectIndication FaultStatusWithNA,
ifOtnMonTcmLossOfTandemConnection FaultStatusWithNA,
ifOtnMonTcmIncomingAlignmentError FaultStatusWithNA,
ifOtnMonTcmSwitchCriteria EnabledDisabledWithNA}
ifOtnMonTcmIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifOtnMonTcmEntry 1 }
ifOtnMonTcmName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the otn tcm, for example 'tcm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells which TCM in the ODU header it is.
"
::= { ifOtnMonTcmEntry 2 }
ifOtnMonTcmConnOduIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in ifOtnMonOdu table
this object is related.
"
::= { ifOtnMonTcmEntry 3 }
ifOtnMonTcmAlarmMode OBJECT-TYPE
SYNTAX OtnAlarmMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for
non-operational sections.
display - Show fault status, but do not generate
alarms for non-operational sections.
alarm - Show fault status and generate alarms also
for non-operational sections.
"
DEFVAL { ignore }
::= { ifOtnMonTcmEntry 4 }
ifOtnMonTcmMode OBJECT-TYPE
SYNTAX TcmMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TCM mode sets the mode of the TCM according to 14.5 in
G.798 (06/2004).
operational - The TCM overhead is operational.
transparent - The TCM overhead is transparent.
monitor - If TCM overhead is transparent but
consequent actions will be executed
in sink adaption.
"
DEFVAL { transparent }
::= { ifOtnMonTcmEntry 5 }
ifOtnMonTcmTcmNumber OBJECT-TYPE
SYNTAX TcmNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TCM number in ODU overhead. Can be tcm1 .. tcm6.
"
DEFVAL { tcm1 }
::= { ifOtnMonTcmEntry 6 }
ifOtnMonTcmTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonTcmEntry 7 }
ifOtnMonTcmRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonTcmEntry 8 }
ifOtnMonTcmBackwardDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Backward defect indication (BDI).
Indicates if backward defect indication (BDI) alarm
exists or not.
Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798
alarm: Backward defect indication (in wrapper) active.
ok: Backward defect indication (in wrapper) inactive.
"
::= { ifOtnMonTcmEntry 9 }
ifOtnMonTcmBackwardIncomingAlignmentError OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backward incoming alignment error (BIAE).
Indicates a backward incoming alignment error.
A: Backward incoming alignment error (BIAE) is active.
D: BIAE is inactive.
"
::= { ifOtnMonTcmEntry 10 }
ifOtnMonTcmRxAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Alarm indication signal (AIS).
Indicates if alarm indication signal (AIS) alarm
exists or not in receiving direction.
Reference: 16.5.1 G.709, 15.8.2.1.5 G.709, 6.2.6.3.2 G.798
alarm: An AIS in OTU signal is detected.
ok: AIS inactive.
"
::= { ifOtnMonTcmEntry 11 }
ifOtnMonTcmRxOpenConnectionIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Open connection indication (OCI).
Indicates if an open connection indication (OCI) alarm
exists or not in receiving direction.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
alarm: An 'open connection' in OTU signal is detected.
ok: OCI inactive.
"
::= { ifOtnMonTcmEntry 12 }
ifOtnMonTcmRxLockedDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Locked defect indication (LCK).
Indicates if locked defect indication alarm exists or not.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
alarm: Locked defect indication active.
ok: Locked defect indication inactive.
"
::= { ifOtnMonTcmEntry 13 }
ifOtnMonTcmLossOfTandemConnection OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loss of tandem connection (LTC).
No operational tandem connection
is found in other end.
Reference: 6.2.1.4 in G.798
alarm: No other operational TCM is found.
ok: An operation TCM is found.
"
::= { ifOtnMonTcmEntry 14 }
ifOtnMonTcmIncomingAlignmentError OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming alignment error (IAE).
Indicates an incoming frame alignment error when TCM is in use.
A: Incoming frame alignment error (IAE) is active.
D: IAE is inactive.
Reference: 14 in G.798
"
::= { ifOtnMonTcmEntry 15 }
ifOtnMonTcmSwitchCriteria OBJECT-TYPE
SYNTAX EnabledDisabledWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TCM switch criteria set current TCM as protection switch criteria.
disable - The TCM is not set as switch criteria.
enable - The TCM is set as switch criteria.
"
DEFVAL { disabled }
::= { ifOtnMonTcmEntry 16}
-- ----------------------------------------------------
-- Otn pm group
-- ----------------------------------------------------
ifOtnMonPmTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfOtnMonPmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects."
::= { ifOtnMonPmList 1 }
ifOtnMonPmEntry OBJECT-TYPE
SYNTAX IfOtnMonPmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifOtnMon pm list.
"
INDEX { ifOtnMonPmIndex }
::= { ifOtnMonPmTable 1 }
IfOtnMonPmEntry ::=
SEQUENCE {
ifOtnMonPmIndex Unsigned32,
ifOtnMonPmName MgmtNameString,
ifOtnMonPmConnOduIndex Unsigned32WithNA,
ifOtnMonPmAlarmMode OtnAlarmMode,
ifOtnMonPmTxSignalStatus SignalStatusWithNA,
ifOtnMonPmRxSignalStatus SignalStatusWithNA,
ifOtnMonPmRxBackwardDefectIndication FaultStatusWithNA,
ifOtnMonPmRxAlarmIndicationSignal FaultStatusWithNA,
ifOtnMonPmRxOpenConnectionIndication FaultStatusWithNA,
ifOtnMonPmRxLockedDefectIndication FaultStatusWithNA,
ifOtnMonPmTxBackwardDefectIndication FaultStatusWithNA,
ifOtnMonPmTxAlarmIndicationSignal FaultStatusWithNA,
ifOtnMonPmTxOpenConnectionIndication FaultStatusWithNA,
ifOtnMonPmTxLockedDefectIndication FaultStatusWithNA,
ifOtnMonPmUpPortId Integer32 }
ifOtnMonPmIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifOtnMonPmEntry 1 }
ifOtnMonPmName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the otn pm, for example 'pm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells in which of the ODU the PM is located.
"
::= { ifOtnMonPmEntry 2 }
ifOtnMonPmConnOduIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in ifOtnMonOdu table
this object is related.
"
::= { ifOtnMonPmEntry 4 }
ifOtnMonPmAlarmMode OBJECT-TYPE
SYNTAX OtnAlarmMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for non-operational sections.
display - Show fault status, but do not generate alarms for non-operational sections.
alarm - Show fault status and generate alarms also for non-operational sections.
"
DEFVAL { alarm }
::= { ifOtnMonPmEntry 5 }
ifOtnMonPmTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonPmEntry 6 }
ifOtnMonPmRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonPmEntry 7 }
ifOtnMonPmRxBackwardDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Backward defect indication (BDI),
Monitored overhead: ODUk-PM-BDI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the BDI is sent towards
the board-internal G.805 Matrix.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rules
"
::= { ifOtnMonPmEntry 8 }
ifOtnMonPmRxAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Alarm indication signal (AIS),
Monitored overhead: ODUk-PM-AIS
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the AIS is sent towards
the board-internal G.805 Matrix.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according to
the G.798 processing rules
"
::= { ifOtnMonPmEntry 9 }
ifOtnMonPmRxOpenConnectionIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Open connection indication (OCI).
Monitored overhead: ODUk-PM-OCI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the OCI is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive according to
the G.798 processing rules
"
::= { ifOtnMonPmEntry 10 }
ifOtnMonPmRxLockedDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Locked defect indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the LCK is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive according to
the G.798 processing rules
"
::= { ifOtnMonPmEntry 11 }
ifOtnMonPmTxBackwardDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Backward defect indication (BDI).
Monitored overhead: ODUk-PM-BDI
Direction: Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rules
"
::= { ifOtnMonPmEntry 12 }
ifOtnMonPmTxAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Alarm indication signal (AIS).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according
to the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according
to the G.798 processing rules
"
::= { ifOtnMonPmEntry 13 }
ifOtnMonPmTxOpenConnectionIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Open connection indication (OCI).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive
according to the G.798 processing rules
"
::= { ifOtnMonPmEntry 14 }
ifOtnMonPmTxLockedDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Locked Defect Indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive
according to the G.798 processing rules
"
::= { ifOtnMonPmEntry 15 }
ifOtnMonPmUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
DEFVAL { -1 }
::= { ifOtnMonPmEntry 16 }
-- ----------------------------------------------------
-- Otn trace group
-- ----------------------------------------------------
ifOtnMonTraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfOtnMonTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The trace group contains information and configuration for the
trace objects defined in G.709."
::= { ifOtnMonTraceList 1 }
ifOtnMonTraceEntry OBJECT-TYPE
SYNTAX IfOtnMonTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifOtnMon trace list.
"
INDEX { ifOtnMonTraceIndex }
::= { ifOtnMonTraceTable 1 }
IfOtnMonTraceEntry ::=
SEQUENCE {
ifOtnMonTraceIndex Unsigned32,
ifOtnMonTraceName MgmtNameString,
ifOtnMonTraceConnOtnType OtnTypeWithNA,
ifOtnMonTraceConnOtnIndex Unsigned32WithNA,
ifOtnMonTraceSapiTraceTransmitted DisplayStringWithNA,
ifOtnMonTraceSapiTraceReceivedByte0 Unsigned32WithNA,
ifOtnMonTraceSapiTraceReceived DisplayStringWithNA,
ifOtnMonTraceSapiTraceExpected DisplayStringWithNA,
ifOtnMonTraceDapiTraceTransmitted DisplayStringWithNA,
ifOtnMonTraceDapiTraceReceivedByte0 Unsigned32WithNA,
ifOtnMonTraceDapiTraceReceived DisplayStringWithNA,
ifOtnMonTraceDapiTraceExpected DisplayStringWithNA,
ifOtnMonTraceOpSpecificTraceTransmitted DisplayStringWithNA,
ifOtnMonTraceOpSpecificTraceReceived DisplayStringWithNA,
ifOtnMonTraceTraceIdMMDetectionMode OtnTIMDetModeWithNA,
ifOtnMonTraceTraceAlarmMode EnabledDisabledWithNA,
ifOtnMonTraceTIMConsequenceActionsDisabled TruthValueWithNA,
ifOtnMonTraceTxSignalStatus SignalStatusWithNA,
ifOtnMonTraceRxSignalStatus SignalStatusWithNA,
ifOtnMonTraceTraceMismatch FaultStatusWithNA,
ifOtnMonTraceConnOtnDirection OtnDirectionWithNA,
ifOtnMonTraceUpPortId Integer32 }
ifOtnMonTraceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifOtnMonTraceEntry 1 }
ifOtnMonTraceName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The management name of the OTN trace, for example 'clientSmTrace:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers.
"
::= { ifOtnMonTraceEntry 2 }
ifOtnMonTraceConnOtnType OBJECT-TYPE
SYNTAX OtnTypeWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"What type of monitoring object the trace is related to.
sm - Section monitoring (SM).
pm - Path monitoring (PM).
tcm1 - Tandem connection monitoring (TCM)
tcm2 - Tandem connection monitoring (TCM)
tcm3 - Tandem connection monitoring (TCM)
tcm4 - Tandem connection monitoring (TCM)
tcm5 - Tandem connection monitoring (TCM)
tcm6 - Tandem connection monitoring (TCM)
"
::= { ifOtnMonTraceEntry 3 }
ifOtnMonTraceConnOtnIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in SM, TCM or PM table
this object is related.
"
::= { ifOtnMonTraceEntry 4 }
ifOtnMonTraceSapiTraceTransmitted OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since the first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
DEFVAL { "" }
::= { ifOtnMonTraceEntry 5 }
ifOtnMonTraceSapiTraceReceivedByte0 OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received Source Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configuration.
The value 254 is used by SNMP agent to show that the attribute is
not possible to read at the moment.
"
::= { ifOtnMonTraceEntry 6 }
ifOtnMonTraceSapiTraceReceived OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received Source Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
::= { ifOtnMonTraceEntry 7 }
ifOtnMonTraceSapiTraceExpected OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SAPI used for matching against the received SAPI.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
DEFVAL { "" }
::= { ifOtnMonTraceEntry 8 }
ifOtnMonTraceDapiTraceTransmitted OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Destination Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
DEFVAL { "" }
::= { ifOtnMonTraceEntry 9 }
ifOtnMonTraceDapiTraceReceivedByte0 OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received Destination Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configuration.
The value 254 is used by SNMP agent to show that the attribute is
not possible to read at the moment.
"
::= { ifOtnMonTraceEntry 10 }
ifOtnMonTraceDapiTraceReceived OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received Destination Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
::= { ifOtnMonTraceEntry 11 }
ifOtnMonTraceDapiTraceExpected OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DAPI used for matching against the received DAPI.
Note, it is only possible to enter 15 characters since the first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
DEFVAL { "" }
::= { ifOtnMonTraceEntry 12 }
ifOtnMonTraceOpSpecificTraceTransmitted OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operator specific trace identifier to be transmitted
from this interface.
Set to empty string for default value.
<IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address
is used.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
DEFVAL { "" }
::= { ifOtnMonTraceEntry 13 }
ifOtnMonTraceOpSpecificTraceReceived OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received operator specific trace identifier for this
interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
"
::= { ifOtnMonTraceEntry 14 }
ifOtnMonTraceTraceIdMMDetectionMode OBJECT-TYPE
SYNTAX OtnTIMDetModeWithNA
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method to detect a trace identifier mismatch value.
off - Mismatch will be ignored on all levels
sapi - Mismatch is based on mismatch in expected and received SAPI
trace
dapi - Mismatch is based on mismatch in expected and received DAPI
trace
both - Mismatch is based on both SAPI and DAPI traces.
"
DEFVAL { off }
::= { ifOtnMonTraceEntry 15 }
ifOtnMonTraceTraceAlarmMode OBJECT-TYPE
SYNTAX EnabledDisabledWithNA
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Controls if the trace identifier mismatch alarm
should be raised. If trace alarm mode is enabled and if object
is set in terminating or monitor mode, BDI is sent
in backward direction if received trace and expected trace
differs.
disabled - The alarm is disabled.
enabled - The alarm is raised if expected trace identifier
differs from the received trace identifier.
"
DEFVAL { disabled }
::= { ifOtnMonTraceEntry 16 }
ifOtnMonTraceTIMConsequenceActionsDisabled OBJECT-TYPE
SYNTAX TruthValueWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Controls if the trace identifier mismatch should give rise
to any consequent actions in the downstream direction.
Consequent actions for the upstream direction are always enabled
regardless of this value.
true - No consequent actions due to trace identifier mis-
match alarm.
false - Consequent actions enabled.
Reference: 9, 13 and 14 in G.798
"
DEFVAL { true }
::= { ifOtnMonTraceEntry 17 }
ifOtnMonTraceTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonTraceEntry 18 }
ifOtnMonTraceRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifOtnMonTraceEntry 19 }
ifOtnMonTraceTraceMismatch OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trace identifier mismatch (TIM).
Indicates if the expected SM/PM/TCM trace identifier
(SAPI and/or DAPI) differs from the received trace
identifier.
Reference: 15.8.2.2.1 G.709
alarm: The received trace identifier differs from
the expected trace identifier.
ok: The identifiers match.
"
::= { ifOtnMonTraceEntry 20 }
ifOtnMonTraceConnOtnDirection OBJECT-TYPE
SYNTAX OtnDirectionWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Direction of the trail trace identifier object
on the interface.
none - Direction is unambiguous.
rx - Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
tx - Received from the physical interface and, if applicable,
sent towards the board-internal G.805 Matrix.
"
::= { ifOtnMonTraceEntry 21 }
ifOtnMonTraceUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
DEFVAL { -1 }
::= { ifOtnMonTraceEntry 22 }
-- ----------------------------------------------------
-- Notifications
-- ----------------------------------------------------
-- ----------------------------------------------------
-- Object and event groups
-- ----------------------------------------------------
ifOtnMonGeneralGroupV1 OBJECT-GROUP
OBJECTS {
ifOtnMonGeneralConfigLastChangeTime,
ifOtnMonGeneralStateLastChangeTime,
ifOtnMonGeneralIfOtnMonSmTableSize,
ifOtnMonGeneralIfOtnMonSmConfigLastChangeTime,
ifOtnMonGeneralIfOtnMonSmStateLastChangeTime,
ifOtnMonGeneralIfOtnMonTcmTableSize,
ifOtnMonGeneralIfOtnMonTcmConfigLastChangeTime,
ifOtnMonGeneralIfOtnMonTcmStateLastChangeTime,
ifOtnMonGeneralIfOtnMonPmTableSize,
ifOtnMonGeneralIfOtnMonPmConfigLastChangeTime,
ifOtnMonGeneralIfOtnMonPmStateLastChangeTime,
ifOtnMonGeneralIfOtnMonTraceTableSize,
ifOtnMonGeneralIfOtnMonTraceConfigLastChangeTime,
ifOtnMonGeneralIfOtnMonTraceStateLastChangeTime }
STATUS current
DESCRIPTION
"The general objects."
::= { lumIfOtnMonGroups 1 }
ifOtnMonSmGroupV1 OBJECT-GROUP
OBJECTS {
ifOtnMonSmIndex,
ifOtnMonSmName,
ifOtnMonSmConnIfBasicIfIndex,
ifOtnMonSmTxSignalStatus,
ifOtnMonSmRxSignalStatus,
ifOtnMonSmBackwardDefectIndication,
ifOtnMonSmIncomingAlignmentError,
ifOtnMonSmBackwardIncomingAlignmentError }
STATUS current
DESCRIPTION
"The ifOtnMon sm objects (R20.0)."
::= { lumIfOtnMonGroups 2 }
ifOtnMonTcmGroupV1 OBJECT-GROUP
OBJECTS {
ifOtnMonTcmIndex,
ifOtnMonTcmName,
ifOtnMonTcmConnOduIndex,
ifOtnMonTcmAlarmMode,
ifOtnMonTcmMode,
ifOtnMonTcmTcmNumber,
ifOtnMonTcmTxSignalStatus,
ifOtnMonTcmRxSignalStatus,
ifOtnMonTcmBackwardDefectIndication,
ifOtnMonTcmBackwardIncomingAlignmentError,
ifOtnMonTcmRxAlarmIndicationSignal,
ifOtnMonTcmRxOpenConnectionIndication,
ifOtnMonTcmRxLockedDefectIndication,
ifOtnMonTcmLossOfTandemConnection,
ifOtnMonTcmIncomingAlignmentError }
STATUS deprecated
DESCRIPTION
"The ifOtnMon tcm objects (R20.0)."
::= { lumIfOtnMonGroups 3 }
ifOtnMonPmGroupV1 OBJECT-GROUP
OBJECTS {
ifOtnMonPmIndex,
ifOtnMonPmName,
ifOtnMonPmConnOduIndex,
ifOtnMonPmAlarmMode,
ifOtnMonPmTxSignalStatus,
ifOtnMonPmRxSignalStatus,
ifOtnMonPmRxBackwardDefectIndication,
ifOtnMonPmRxAlarmIndicationSignal,
ifOtnMonPmRxOpenConnectionIndication,
ifOtnMonPmRxLockedDefectIndication }
STATUS deprecated
DESCRIPTION
"The ifOtnMon pm objects (R20.0)."
::= { lumIfOtnMonGroups 4 }
ifOtnMonTraceGroupV1 OBJECT-GROUP
OBJECTS {
ifOtnMonTraceIndex,
ifOtnMonTraceName,
ifOtnMonTraceConnOtnIndex,
ifOtnMonTraceConnOtnType,
ifOtnMonTraceSapiTraceTransmitted,
ifOtnMonTraceSapiTraceReceivedByte0,
ifOtnMonTraceSapiTraceReceived,
ifOtnMonTraceSapiTraceExpected,
ifOtnMonTraceDapiTraceTransmitted,
ifOtnMonTraceDapiTraceReceivedByte0,
ifOtnMonTraceDapiTraceReceived,
ifOtnMonTraceDapiTraceExpected,
ifOtnMonTraceOpSpecificTraceTransmitted,
ifOtnMonTraceOpSpecificTraceReceived,
ifOtnMonTraceTraceIdMMDetectionMode,
ifOtnMonTraceTraceAlarmMode,
ifOtnMonTraceTIMConsequenceActionsDisabled,
ifOtnMonTraceTxSignalStatus,
ifOtnMonTraceRxSignalStatus,
ifOtnMonTraceTraceMismatch }
STATUS deprecated
DESCRIPTION
"The ifOtnMon trace objects (R20.0)."
::= { lumIfOtnMonGroups 5 }
ifOtnMonPmGroupV2 OBJECT-GROUP
OBJECTS {
ifOtnMonPmIndex,
ifOtnMonPmName,
ifOtnMonPmConnOduIndex,
ifOtnMonPmAlarmMode,
ifOtnMonPmTxSignalStatus,
ifOtnMonPmRxSignalStatus,
ifOtnMonPmRxBackwardDefectIndication,
ifOtnMonPmRxAlarmIndicationSignal,
ifOtnMonPmRxOpenConnectionIndication,
ifOtnMonPmTxBackwardDefectIndication,
ifOtnMonPmTxAlarmIndicationSignal,
ifOtnMonPmTxOpenConnectionIndication,
ifOtnMonPmTxLockedDefectIndication }
STATUS deprecated
DESCRIPTION
"The ifOtnMon pm objects (R22.0)."
::= { lumIfOtnMonGroups 6 }
ifOtnMonTcmGroupV2 OBJECT-GROUP
OBJECTS {
ifOtnMonTcmIndex,
ifOtnMonTcmName,
ifOtnMonTcmConnOduIndex,
ifOtnMonTcmAlarmMode,
ifOtnMonTcmMode,
ifOtnMonTcmTcmNumber,
ifOtnMonTcmTxSignalStatus,
ifOtnMonTcmRxSignalStatus,
ifOtnMonTcmBackwardDefectIndication,
ifOtnMonTcmBackwardIncomingAlignmentError,
ifOtnMonTcmRxAlarmIndicationSignal,
ifOtnMonTcmRxOpenConnectionIndication,
ifOtnMonTcmRxLockedDefectIndication,
ifOtnMonTcmLossOfTandemConnection,
ifOtnMonTcmIncomingAlignmentError,
ifOtnMonTcmSwitchCriteria }
STATUS current
DESCRIPTION
"The ifOtnMon tcm objects (R23.0)."
::= { lumIfOtnMonGroups 7 }
ifOtnMonTraceGroupV2 OBJECT-GROUP
OBJECTS {
ifOtnMonTraceIndex,
ifOtnMonTraceName,
ifOtnMonTraceConnOtnType,
ifOtnMonTraceConnOtnIndex,
ifOtnMonTraceSapiTraceTransmitted,
ifOtnMonTraceSapiTraceReceivedByte0,
ifOtnMonTraceSapiTraceReceived,
ifOtnMonTraceSapiTraceExpected,
ifOtnMonTraceDapiTraceTransmitted,
ifOtnMonTraceDapiTraceReceivedByte0,
ifOtnMonTraceDapiTraceReceived,
ifOtnMonTraceDapiTraceExpected,
ifOtnMonTraceOpSpecificTraceTransmitted,
ifOtnMonTraceOpSpecificTraceReceived,
ifOtnMonTraceTraceIdMMDetectionMode,
ifOtnMonTraceTraceAlarmMode,
ifOtnMonTraceTIMConsequenceActionsDisabled,
ifOtnMonTraceTxSignalStatus,
ifOtnMonTraceRxSignalStatus,
ifOtnMonTraceTraceMismatch }
STATUS deprecated
DESCRIPTION
"The ifOtnMon trace objects (R23.0)."
::= { lumIfOtnMonGroups 8 }
ifOtnMonTraceGroupV3 OBJECT-GROUP
OBJECTS {
ifOtnMonTraceIndex,
ifOtnMonTraceName,
ifOtnMonTraceConnOtnType,
ifOtnMonTraceConnOtnIndex,
ifOtnMonTraceSapiTraceTransmitted,
ifOtnMonTraceSapiTraceReceivedByte0,
ifOtnMonTraceSapiTraceReceived,
ifOtnMonTraceSapiTraceExpected,
ifOtnMonTraceDapiTraceTransmitted,
ifOtnMonTraceDapiTraceReceivedByte0,
ifOtnMonTraceDapiTraceReceived,
ifOtnMonTraceDapiTraceExpected,
ifOtnMonTraceOpSpecificTraceTransmitted,
ifOtnMonTraceOpSpecificTraceReceived,
ifOtnMonTraceTraceIdMMDetectionMode,
ifOtnMonTraceTraceAlarmMode,
ifOtnMonTraceTIMConsequenceActionsDisabled,
ifOtnMonTraceTxSignalStatus,
ifOtnMonTraceRxSignalStatus,
ifOtnMonTraceTraceMismatch,
ifOtnMonTraceConnOtnDirection }
STATUS deprecated
DESCRIPTION
"The ifOtnMon trace objects (R25.0)."
::= { lumIfOtnMonGroups 9 }
ifOtnMonPmGroupV3 OBJECT-GROUP
OBJECTS {
ifOtnMonPmIndex,
ifOtnMonPmName,
ifOtnMonPmConnOduIndex,
ifOtnMonPmAlarmMode,
ifOtnMonPmTxSignalStatus,
ifOtnMonPmRxSignalStatus,
ifOtnMonPmRxBackwardDefectIndication,
ifOtnMonPmRxAlarmIndicationSignal,
ifOtnMonPmRxOpenConnectionIndication,
ifOtnMonPmTxBackwardDefectIndication,
ifOtnMonPmTxAlarmIndicationSignal,
ifOtnMonPmTxOpenConnectionIndication,
ifOtnMonPmTxLockedDefectIndication,
ifOtnMonPmUpPortId}
STATUS current
DESCRIPTION
"The ifOtnMon pm objects (R28.0)."
::= { lumIfOtnMonGroups 10 }
ifOtnMonTraceGroupV4 OBJECT-GROUP
OBJECTS {
ifOtnMonTraceIndex,
ifOtnMonTraceName,
ifOtnMonTraceConnOtnType,
ifOtnMonTraceConnOtnIndex,
ifOtnMonTraceSapiTraceTransmitted,
ifOtnMonTraceSapiTraceReceivedByte0,
ifOtnMonTraceSapiTraceReceived,
ifOtnMonTraceSapiTraceExpected,
ifOtnMonTraceDapiTraceTransmitted,
ifOtnMonTraceDapiTraceReceivedByte0,
ifOtnMonTraceDapiTraceReceived,
ifOtnMonTraceDapiTraceExpected,
ifOtnMonTraceOpSpecificTraceTransmitted,
ifOtnMonTraceOpSpecificTraceReceived,
ifOtnMonTraceTraceIdMMDetectionMode,
ifOtnMonTraceTraceAlarmMode,
ifOtnMonTraceTIMConsequenceActionsDisabled,
ifOtnMonTraceTxSignalStatus,
ifOtnMonTraceRxSignalStatus,
ifOtnMonTraceTraceMismatch,
ifOtnMonTraceConnOtnDirection,
ifOtnMonTraceUpPortId }
STATUS current
DESCRIPTION
"The ifOtnMon trace objects (R28.0)."
::= { lumIfOtnMonGroups 11 }
-- ----------------------------------------------------
-- Compliance
-- ----------------------------------------------------
lumIfOtnMonComplV1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifOtnMon MIB. (R20.0)"
MODULE
MANDATORY-GROUPS {
ifOtnMonGeneralGroupV1,
ifOtnMonSmGroupV1,
ifOtnMonTcmGroupV1,
ifOtnMonPmGroupV1,
ifOtnMonTraceGroupV1 }
::= { lumIfOtnMonCompl 1 }
lumIfOtnMonComplV2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifOtnMon MIB. (R22.0)"
MODULE
MANDATORY-GROUPS {
ifOtnMonGeneralGroupV1,
ifOtnMonSmGroupV1,
ifOtnMonTcmGroupV1,
ifOtnMonPmGroupV2,
ifOtnMonTraceGroupV1 }
::= { lumIfOtnMonCompl 2 }
lumIfOtnMonComplV3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifOtnMon MIB. (R23.0)"
MODULE
MANDATORY-GROUPS {
ifOtnMonGeneralGroupV1,
ifOtnMonSmGroupV1,
ifOtnMonTcmGroupV2,
ifOtnMonPmGroupV2,
ifOtnMonTraceGroupV2 }
::= { lumIfOtnMonCompl 3 }
lumIfOtnMonComplV4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifOtnMon MIB. (R25.0)"
MODULE
MANDATORY-GROUPS {
ifOtnMonGeneralGroupV1,
ifOtnMonSmGroupV1,
ifOtnMonTcmGroupV2,
ifOtnMonPmGroupV2,
ifOtnMonTraceGroupV3 }
::= { lumIfOtnMonCompl 4 }
lumIfOtnMonComplV5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Basic implementation requirements for the ifOtnMon MIB. (R28.0)"
MODULE
MANDATORY-GROUPS {
ifOtnMonGeneralGroupV1,
ifOtnMonSmGroupV1,
ifOtnMonTcmGroupV2,
ifOtnMonPmGroupV3,
ifOtnMonTraceGroupV4 }
::= { lumIfOtnMonCompl 5 }
END
Reference in New Issue Copy Permalink