2875 lines
78 KiB
Plaintext
2875 lines
78 KiB
Plaintext
|
LUM-IFPERF-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
TEXTUAL-CONVENTION, DateAndTime, DisplayString
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
lumModules, lumIfPerfMIB
|
||
|
|
FROM LUM-REG
|
||
|
|
Unsigned32WithNA, MgmtNameString, AdminStatusWithNA, OperStatusWithNA,
|
||
|
|
ResetWithNA, OnOff, FaultStatusWithNA, Signed32WithNA, CommandString, TribPortIdType
|
||
|
|
FROM LUM-TC;
|
||
|
|
|
||
|
|
lumIfPerfMIBModule MODULE-IDENTITY
|
||
|
|
LAST-UPDATED
|
||
|
|
"201906280000Z" -- June 28th 2019
|
||
|
|
ORGANIZATION
|
||
|
|
"Infinera Corporation"
|
||
|
|
CONTACT-INFO
|
||
|
|
"techsupport@infinera.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"The MIB module for management of performance objects.
|
||
|
|
|
||
|
|
The tables contained in this MIB are:
|
||
|
|
|
||
|
|
(1) The General group contains some general attributes as time stamps
|
||
|
|
and tables sizes.
|
||
|
|
|
||
|
|
(2) The ifPerfAdmin performance group contains information and
|
||
|
|
configuration for all Admin performance objects
|
||
|
|
|
||
|
|
(3) The ifPerfFec performance group contains information and
|
||
|
|
configuration for all Fec performance objects.
|
||
|
|
|
||
|
|
(4) The ifPerfG826 performance group contains information and
|
||
|
|
configuration for all G826 performance objects. Notice table
|
||
|
|
is uni-directional meaning one entry for each direction.
|
||
|
|
|
||
|
|
(5) The ifPerfL1 performance group contains information and
|
||
|
|
configuration for all L1 performance objects. Notice table
|
||
|
|
is uni-directional meaning one entry for each direction.
|
||
|
|
|
||
|
|
(6) The ifPerfL0 performance group contains information and
|
||
|
|
configuration for all L0 performance objects.
|
||
|
|
|
||
|
|
(7) The ifPerfL2 performance group contains information and
|
||
|
|
configuration for all L2 performance objects.
|
||
|
|
|
||
|
|
"
|
||
|
|
REVISION
|
||
|
|
"201906280000Z" -- June 28th 2019
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r33.0:
|
||
|
|
- Added oa1x21dBmVgEC board
|
||
|
|
- Added oa2x21dBmVgEC board"
|
||
|
|
REVISION
|
||
|
|
"201903300000Z" -- March 30th 2019
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r32.1:
|
||
|
|
- Added ifPerfL0OpticalSNR
|
||
|
|
- Added ifPerfL0QFactor
|
||
|
|
- Added ifPerfFecQMargin
|
||
|
|
- Added ifPerfFecPreFecBer
|
||
|
|
- Added ifPerfL0OpticalSNR and ifPerfFecQMargin
|
||
|
|
- Added ifPerfG826TribPortId."
|
||
|
|
REVISION
|
||
|
|
"201706150000Z" -- June 15th 2017
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r29.0:
|
||
|
|
- Changed ORGANIZATION and CONTACT-INFO"
|
||
|
|
REVISION
|
||
|
|
"201611300000Z" -- November 30th 2016
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r28:
|
||
|
|
- Added tp100gotnii board."
|
||
|
|
REVISION
|
||
|
|
"201609300000Z" -- September 30th 2016
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r27.1:
|
||
|
|
- Added rfuac1 board."
|
||
|
|
REVISION
|
||
|
|
"201601110000Z" -- Jan 11th 2016
|
||
|
|
DESCRIPTION
|
||
|
|
"Added default operStatus to notPresent."
|
||
|
|
REVISION
|
||
|
|
"201512220000Z" -- December 22nd 2015
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r27:
|
||
|
|
- Added fhau1 board
|
||
|
|
- Added fha1u1 board"
|
||
|
|
REVISION
|
||
|
|
"201511300000Z" -- Nov 30th 2015
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r26:
|
||
|
|
- Added attribute optical SNR."
|
||
|
|
REVISION
|
||
|
|
"201505290000Z" -- May 29th 2015
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r25:
|
||
|
|
- Added attribute FEC corrected bits.
|
||
|
|
- Added corresponding FEC RxBitErorrEstimate attribute as display string."
|
||
|
|
REVISION
|
||
|
|
"201409300000Z" -- September 30th 2014
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r23.1:
|
||
|
|
- Added mxp100gotn board."
|
||
|
|
REVISION
|
||
|
|
"201405160000Z" -- May 16th 2014
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r23:
|
||
|
|
- Added some L2 PM attributes
|
||
|
|
- Added some L0 PM attributes"
|
||
|
|
REVISION
|
||
|
|
"201311150000Z" -- November 15th 2013
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes made for release r22:
|
||
|
|
- Added tp10gotn, tp100gotn board.
|
||
|
|
- Added the L2 table
|
||
|
|
- Added Current Utilization attribute"
|
||
|
|
REVISION
|
||
|
|
"201305010000Z" -- May 1st 2013
|
||
|
|
DESCRIPTION
|
||
|
|
"The initial revision of this module."
|
||
|
|
::= { lumModules 56 }
|
||
|
|
|
||
|
|
|
||
|
|
PerfPeriodWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The period time for performance data.
|
||
|
|
|
||
|
|
period15minutes - 15 minutes
|
||
|
|
period24hours - 24 hours"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
period15minutes (1),
|
||
|
|
period24hours (2),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
|
||
|
|
G826MonitorLevelWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The monitor level."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
opu0 (1),
|
||
|
|
odu0 (2),
|
||
|
|
otu0 (3),
|
||
|
|
opu1 (4),
|
||
|
|
odu1 (5),
|
||
|
|
otu1 (6),
|
||
|
|
opu2 (7),
|
||
|
|
odu2 (8),
|
||
|
|
otu2 (9),
|
||
|
|
opu3 (10),
|
||
|
|
odu3 (11),
|
||
|
|
otu3 (12),
|
||
|
|
opu4 (13),
|
||
|
|
odu4 (14),
|
||
|
|
otu4 (15),
|
||
|
|
oduFlex (16),
|
||
|
|
rs (17),
|
||
|
|
ms (18),
|
||
|
|
mac (19),
|
||
|
|
pcs (20),
|
||
|
|
cpriL1 (21),
|
||
|
|
obsaiL1 (22),
|
||
|
|
irsoh (23),
|
||
|
|
imsoh (24),
|
||
|
|
otuj2 (25),
|
||
|
|
opuFlex (26),
|
||
|
|
otuj1 (27),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
|
||
|
|
G826MonitorChannelWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The monitor channel."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unused (0),
|
||
|
|
sm (1),
|
||
|
|
pm (2),
|
||
|
|
tcm1 (3),
|
||
|
|
tcm2 (4),
|
||
|
|
tcm3 (5),
|
||
|
|
tcm4 (6),
|
||
|
|
tcm5 (7),
|
||
|
|
tcm6 (8),
|
||
|
|
notAvailable (2147483646),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
|
||
|
|
L1MeasurementTypeWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type.
|
||
|
|
|
||
|
|
rx - receiver, only ingoing signal
|
||
|
|
tx - transmitter, only outgoing signal"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rx (1),
|
||
|
|
tx (2),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
L2MeasurementTypeWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type.
|
||
|
|
|
||
|
|
rx - receiver, only ingoing signal
|
||
|
|
tx - transmitter, only outgoing signal"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rx (1),
|
||
|
|
tx (2),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
|
||
|
|
G826MeasurementTypeWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type.
|
||
|
|
|
||
|
|
rx - receiver, only ingoing signal
|
||
|
|
tx - transmitter, only outgoing signal
|
||
|
|
uniDi - unidirectional
|
||
|
|
biDi - bidirectional, ingoing and outgoing signal on the same port"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rx (1),
|
||
|
|
tx (2),
|
||
|
|
uniDi (3),
|
||
|
|
biDi (4),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
BooleanValueWithNA ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines a value that can be true, false or not available
|
||
|
|
|
||
|
|
true - The condition is true
|
||
|
|
|
||
|
|
false - The condition is false
|
||
|
|
|
||
|
|
notAvailable (2147483646) is used when attribute is
|
||
|
|
not available under current circumstances. This value
|
||
|
|
is only used when used for a state.
|
||
|
|
|
||
|
|
notApplicable (2147483647) is used when attribute is
|
||
|
|
not used in current configuration."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true (1),
|
||
|
|
false (2),
|
||
|
|
notAvailable (2147483646),
|
||
|
|
notApplicable (2147483647) }
|
||
|
|
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Compliance area, containing groups and compliance
|
||
|
|
-- specifications.
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
lumIfPerfConfs OBJECT IDENTIFIER ::= { lumIfPerfMIB 1 }
|
||
|
|
lumIfPerfGroups OBJECT IDENTIFIER ::= { lumIfPerfConfs 1 }
|
||
|
|
lumIfPerfCompl OBJECT IDENTIFIER ::= { lumIfPerfConfs 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Root for objects in the IFPERF MIB
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
lumIfPerfMIBObjects OBJECT IDENTIFIER ::= { lumIfPerfMIB 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- This MIB contains the following groups:
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfGeneral OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 1 }
|
||
|
|
ifPerfAdminList OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 2 }
|
||
|
|
ifPerfFecList OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 3 }
|
||
|
|
ifPerfG826List OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 4 }
|
||
|
|
ifPerfL1List OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 5 }
|
||
|
|
ifPerfL0List OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 6 }
|
||
|
|
ifPerfL2StatList OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 7 }
|
||
|
|
ifPerfL2ErrorList OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 8 }
|
||
|
|
ifPerfDelayList OBJECT IDENTIFIER ::= { lumIfPerfMIBObjects 9 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- General group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
ifPerfGeneralConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the MIB was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 1 }
|
||
|
|
|
||
|
|
ifPerfGeneralStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the MIB was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 2 }
|
||
|
|
|
||
|
|
ifPerfGeneralAdminTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfAdmin performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 3 }
|
||
|
|
|
||
|
|
ifPerfGeneralAdminConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 4 }
|
||
|
|
|
||
|
|
ifPerfGeneralAdminStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 5 }
|
||
|
|
|
||
|
|
ifPerfGeneralFecTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfFec performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 6 }
|
||
|
|
|
||
|
|
ifPerfGeneralFecConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 7 }
|
||
|
|
|
||
|
|
ifPerfGeneralFecStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 8 }
|
||
|
|
|
||
|
|
ifPerfGeneralG826TableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfG826 performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 9 }
|
||
|
|
|
||
|
|
ifPerfGeneralG826ConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 10 }
|
||
|
|
|
||
|
|
ifPerfGeneralG826StateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 11 }
|
||
|
|
|
||
|
|
ifPerfGeneralL1TableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfL1 performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 12 }
|
||
|
|
|
||
|
|
ifPerfGeneralL1ConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 13 }
|
||
|
|
|
||
|
|
ifPerfGeneralL1StateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 14 }
|
||
|
|
|
||
|
|
ifPerfGeneralL0TableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfL0 performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 15 }
|
||
|
|
|
||
|
|
ifPerfGeneralL0ConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 16 }
|
||
|
|
|
||
|
|
ifPerfGeneralL0StateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 17 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2StatTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfL0 performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 18 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2StatConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 19 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2StatStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 20 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2ErrorTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfL0 performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 21 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2ErrorConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 22 }
|
||
|
|
|
||
|
|
ifPerfGeneralL2ErrorStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 23 }
|
||
|
|
|
||
|
|
ifPerfGeneralDelayTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of ifPerfDelay performance table.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 24 }
|
||
|
|
|
||
|
|
ifPerfGeneralDelayConfigLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the configuration of the table was
|
||
|
|
last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 25 }
|
||
|
|
|
||
|
|
ifPerfGeneralDelayStateLastChangeTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time when the state and/or configuration of
|
||
|
|
the table was last changed.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfGeneral 26 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfAdmin admin group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfAdminTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfAdminEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfAdmin performance group contains information and
|
||
|
|
configuration for all ifPerfAdmin performance objects."
|
||
|
|
|
||
|
|
::= { ifPerfAdminList 1 }
|
||
|
|
|
||
|
|
ifPerfAdminEntry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfAdminEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfAdmin list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfAdminIndex }
|
||
|
|
::= { ifPerfAdminTable 1 }
|
||
|
|
|
||
|
|
IfPerfAdminEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfAdminIndex Unsigned32,
|
||
|
|
ifPerfAdminName MgmtNameString,
|
||
|
|
ifPerfAdminConnIfBasicIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfAdminAdminStatus AdminStatusWithNA,
|
||
|
|
ifPerfAdminReportMode OnOff,
|
||
|
|
ifPerfAdminOperStatus OperStatusWithNA,
|
||
|
|
ifPerfAdminIsSuspect15m BooleanValueWithNA,
|
||
|
|
ifPerfAdminIsSuspect24h BooleanValueWithNA,
|
||
|
|
ifPerfAdminReset15m ResetWithNA,
|
||
|
|
ifPerfAdminReset24h ResetWithNA,
|
||
|
|
ifPerfAdminUpId Unsigned32 }
|
||
|
|
|
||
|
|
ifPerfAdminIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfAdminEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
ifPerfAdminName OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'lineAdmin:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfAdminEntry 2 }
|
||
|
|
|
||
|
|
ifPerfAdminConnIfBasicIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifBasicIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfAdminEntry 3 }
|
||
|
|
|
||
|
|
ifPerfAdminAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX AdminStatusWithNA
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative state of the ifPerf interface.
|
||
|
|
|
||
|
|
down - The interface is de-activated.
|
||
|
|
|
||
|
|
service - The interface is activated.
|
||
|
|
|
||
|
|
up - The interface will be activated when
|
||
|
|
available.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { up }
|
||
|
|
::= { ifPerfAdminEntry 4 }
|
||
|
|
|
||
|
|
ifPerfAdminReportMode OBJECT-TYPE
|
||
|
|
SYNTAX OnOff
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The performance reporting mode on the interface.
|
||
|
|
|
||
|
|
off - performance reporting is inactive.
|
||
|
|
|
||
|
|
on - performance reporting is activated.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { on }
|
||
|
|
::= { ifPerfAdminEntry 5 }
|
||
|
|
|
||
|
|
ifPerfAdminOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX OperStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational state for the interface.
|
||
|
|
|
||
|
|
notPresent - The interface is not available.
|
||
|
|
|
||
|
|
down - The interface is de-activated or there are
|
||
|
|
faults preventing its transition to the 'up' state.
|
||
|
|
|
||
|
|
up - The interface is active.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { notPresent }
|
||
|
|
::= { ifPerfAdminEntry 6 }
|
||
|
|
|
||
|
|
ifPerfAdminIsSuspect15m OBJECT-TYPE
|
||
|
|
SYNTAX BooleanValueWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable indicates if the performance data is
|
||
|
|
unreliable for the 15 minute interval. The 'isSuspect'
|
||
|
|
value is set to true if the interface has
|
||
|
|
been reconfigured or reset during the maintenance
|
||
|
|
operation. For example if
|
||
|
|
- a full interval has not passed since last reset
|
||
|
|
- the board has been restarted during the interval
|
||
|
|
- adminStatus has been set to down
|
||
|
|
- the system time has been set in the node during the interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfAdminEntry 7 }
|
||
|
|
|
||
|
|
ifPerfAdminIsSuspect24h OBJECT-TYPE
|
||
|
|
SYNTAX BooleanValueWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable indicates if the performance data is
|
||
|
|
unreliable for the 24 hour interval. The 'isSuspect'
|
||
|
|
value is set to true if the interface has
|
||
|
|
been reconfigured or reset during the maintenance
|
||
|
|
operation. For example if
|
||
|
|
- a full interval has not passed since last reset
|
||
|
|
- the board has been restarted during the interval
|
||
|
|
- adminStatus has been set to down
|
||
|
|
- the system time has been set in the node during the interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfAdminEntry 8 }
|
||
|
|
|
||
|
|
ifPerfAdminReset15m OBJECT-TYPE
|
||
|
|
SYNTAX ResetWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Reset all performance counters for the 15 minute interval.
|
||
|
|
After a successful reset the default value
|
||
|
|
(normal) is restored in this attribute.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { normal }
|
||
|
|
::= { ifPerfAdminEntry 9 }
|
||
|
|
|
||
|
|
ifPerfAdminReset24h OBJECT-TYPE
|
||
|
|
SYNTAX ResetWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Reset performance counters for the 24 hour interval.
|
||
|
|
After a successful reset the default value
|
||
|
|
(normal) is restored in this attribute.
|
||
|
|
|
||
|
|
notApplicable (2147483647) is used when attribute is
|
||
|
|
not used in current configuration.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { normal }
|
||
|
|
::= { ifPerfAdminEntry 10 }
|
||
|
|
|
||
|
|
ifPerfAdminUpId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identity in the UP for the Perf Admin entry
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { ifPerfAdminEntry 11 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfFec fec group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfFecTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfFecEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec performance group contains information and
|
||
|
|
configuration for all ifPerfFec performance objects."
|
||
|
|
|
||
|
|
::= { ifPerfFecList 1 }
|
||
|
|
|
||
|
|
ifPerfFecEntry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfFecEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfFec list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfFecIndex }
|
||
|
|
::= { ifPerfFecTable 1 }
|
||
|
|
|
||
|
|
IfPerfFecEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfFecIndex Unsigned32,
|
||
|
|
ifPerfFecName MgmtNameString,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfFecCorrectedZeros Unsigned32WithNA,
|
||
|
|
ifPerfFecCorrectedOnes Unsigned32WithNA,
|
||
|
|
ifPerfFecRxBerEstimation Unsigned32WithNA,
|
||
|
|
ifPerfFecRxAvgPreFecBer Unsigned32WithNA,
|
||
|
|
ifPerfFecCorrectedBits Unsigned32WithNA,
|
||
|
|
ifPerfFecRxBitErrorEstimation DisplayString,
|
||
|
|
ifPerfFecOpticalSNR Unsigned32WithNA,
|
||
|
|
ifPerfFecUpId Unsigned32,
|
||
|
|
ifPerfFecQMargin Unsigned32WithNA,
|
||
|
|
ifPerfFecPreFecBer DisplayString }
|
||
|
|
|
||
|
|
ifPerfFecIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 1 }
|
||
|
|
|
||
|
|
ifPerfFecName OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'lineFec:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 2 }
|
||
|
|
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 3 }
|
||
|
|
|
||
|
|
ifPerfFecCorrectedZeros OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"FEC counter. Number of corrected zeros.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 4 }
|
||
|
|
|
||
|
|
ifPerfFecCorrectedOnes OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"FEC counter. Number of corrected ones.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 5 }
|
||
|
|
|
||
|
|
ifPerfFecRxBerEstimation OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rx Bit Error Rate estimation.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 6 }
|
||
|
|
|
||
|
|
ifPerfFecRxAvgPreFecBer OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rx Average Pre FEC Bit Error Rate of PM interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 7 }
|
||
|
|
|
||
|
|
ifPerfFecCorrectedBits OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"FEC counter. Number of corrected bits.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 8 }
|
||
|
|
|
||
|
|
ifPerfFecRxBitErrorEstimation OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rx Bit Error Rate estimation.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { " " }
|
||
|
|
::= { ifPerfFecEntry 9 }
|
||
|
|
|
||
|
|
ifPerfFecOpticalSNR OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Optical signal-to-noise ratio margin (dB/0.1nm) with respect to FEC cliff, based on calculation from rate of corrected bits.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 10 }
|
||
|
|
|
||
|
|
ifPerfFecUpId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identity in the UP for the Perf Admin entry
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { ifPerfFecEntry 11 }
|
||
|
|
|
||
|
|
ifPerfFecQMargin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Q factor margin (dB) with respect to the FEC threshold.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfFecEntry 12 }
|
||
|
|
|
||
|
|
ifPerfFecPreFecBer OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Pre-FEC BER.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { ifPerfFecEntry 13 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfG826 g826 group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfG826Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfG826Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfG826 performance group contains information and
|
||
|
|
configuration for all ifPerfG826 performance objects. Notice table
|
||
|
|
is uni-directional meaning one entry for each direction."
|
||
|
|
|
||
|
|
::= { ifPerfG826List 1 }
|
||
|
|
|
||
|
|
ifPerfG826Entry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfG826Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfG826 list.
|
||
|
|
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfG826Index }
|
||
|
|
::= { ifPerfG826Table 1 }
|
||
|
|
|
||
|
|
IfPerfG826Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfG826Index Unsigned32,
|
||
|
|
ifPerfG826Name MgmtNameString,
|
||
|
|
ifPerfG826ConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfG826Period PerfPeriodWithNA,
|
||
|
|
ifPerfG826Type G826MeasurementTypeWithNA,
|
||
|
|
ifPerfG826MonitorLevel G826MonitorLevelWithNA,
|
||
|
|
ifPerfG826MonitorChannel G826MonitorChannelWithNA,
|
||
|
|
ifPerfG826CounterEs Unsigned32WithNA,
|
||
|
|
ifPerfG826CounterSes Unsigned32WithNA,
|
||
|
|
ifPerfG826CounterUas Unsigned32WithNA,
|
||
|
|
ifPerfG826CounterBbe Counter64,
|
||
|
|
ifPerfG826ThresholdEs Unsigned32WithNA,
|
||
|
|
ifPerfG826ThresholdSes Unsigned32WithNA,
|
||
|
|
ifPerfG826ThresholdUas Unsigned32WithNA,
|
||
|
|
ifPerfG826ThresholdBbe Counter64,
|
||
|
|
ifPerfG826FaultStatusEs FaultStatusWithNA,
|
||
|
|
ifPerfG826FaultStatusSes FaultStatusWithNA,
|
||
|
|
ifPerfG826FaultStatusUas FaultStatusWithNA,
|
||
|
|
ifPerfG826FaultStatusBbe FaultStatusWithNA,
|
||
|
|
ifPerfG826UpId Unsigned32,
|
||
|
|
ifPerfG826TribPortId TribPortIdType }
|
||
|
|
|
||
|
|
ifPerfG826Index OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 1 }
|
||
|
|
|
||
|
|
ifPerfG826Name OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'lineG826OtsOtu2SmUni15m:1:2:23-24',
|
||
|
|
where the textual part indicates the hierarchy and type
|
||
|
|
line/client
|
||
|
|
G826
|
||
|
|
OTS/OTUk/ODUk/OPUk/RS/MS/MAC/PCS etc or any combination thereof
|
||
|
|
SM/PM/TCMn monitor channel type, no monitor type is also possible
|
||
|
|
Rx/Tx/Uni/Bi direction type
|
||
|
|
15m/24h time period, 15 minutes or 24 hours
|
||
|
|
|
||
|
|
For the part after the colon the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 2 }
|
||
|
|
|
||
|
|
ifPerfG826ConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 3 }
|
||
|
|
|
||
|
|
ifPerfG826Period OBJECT-TYPE
|
||
|
|
SYNTAX PerfPeriodWithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, 15 minute or 24 hour.
|
||
|
|
- 15 minute interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
- 24 hour interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 4 }
|
||
|
|
|
||
|
|
ifPerfG826Type OBJECT-TYPE
|
||
|
|
SYNTAX G826MeasurementTypeWithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type of signal the interface expects.
|
||
|
|
|
||
|
|
rx - Only ingoing signal.
|
||
|
|
|
||
|
|
tx - Only outgoing signal.
|
||
|
|
|
||
|
|
uniDi - Unidirectional signal.
|
||
|
|
|
||
|
|
biDi - Ingoing and outgoing signal on the same
|
||
|
|
port.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 5 }
|
||
|
|
|
||
|
|
ifPerfG826MonitorLevel OBJECT-TYPE
|
||
|
|
SYNTAX G826MonitorLevelWithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Monitor level, e.g. OPUk, ODUk, OTUk, RS, MS, MAC, PCS.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 6 }
|
||
|
|
|
||
|
|
ifPerfG826MonitorChannel OBJECT-TYPE
|
||
|
|
SYNTAX G826MonitorChannelWithNA
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Monitor channel, e.g. SM, PM, TCM1-6.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 7 }
|
||
|
|
|
||
|
|
ifPerfG826CounterEs OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Errored Seconds.
|
||
|
|
The counter associated with the number of
|
||
|
|
errored seconds in the interval specified by the
|
||
|
|
period attribute.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 8 }
|
||
|
|
|
||
|
|
ifPerfG826CounterSes OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Severely Errored Seconds.
|
||
|
|
The counter associated with the number of
|
||
|
|
severely errored seconds in the interval specified
|
||
|
|
by the period attribute.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 9 }
|
||
|
|
|
||
|
|
ifPerfG826CounterUas OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Unavailable Seconds.
|
||
|
|
The counter associated with the number of
|
||
|
|
unavailable seconds in the interval specified
|
||
|
|
by the period attribute.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 10 }
|
||
|
|
|
||
|
|
ifPerfG826CounterBbe OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Background Block Errors.
|
||
|
|
The counter associated with the number of
|
||
|
|
background block errors in the interval specified
|
||
|
|
by the period attribute.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 11 }
|
||
|
|
|
||
|
|
ifPerfG826ThresholdEs OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold in seconds for the
|
||
|
|
errored seconds alarm.
|
||
|
|
|
||
|
|
Range 15m: 0 to 900 seconds
|
||
|
|
24h: 0 to 86400 seconds
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 20 }
|
||
|
|
::= { ifPerfG826Entry 12 }
|
||
|
|
|
||
|
|
ifPerfG826ThresholdSes OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold in seconds for the
|
||
|
|
severely errored seconds alarm.
|
||
|
|
|
||
|
|
Range 15m: 0 to 900 seconds
|
||
|
|
24h: 0 to 86400 seconds
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { ifPerfG826Entry 13 }
|
||
|
|
|
||
|
|
ifPerfG826ThresholdUas OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold in seconds for the
|
||
|
|
unavailable seconds alarm.
|
||
|
|
|
||
|
|
Range 15m: 0 to 900 seconds
|
||
|
|
24h: 0 to 86400 seconds
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { ifPerfG826Entry 14 }
|
||
|
|
|
||
|
|
ifPerfG826ThresholdBbe OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold for the
|
||
|
|
background block errors alarms.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 100000 }
|
||
|
|
::= { ifPerfG826Entry 15 }
|
||
|
|
|
||
|
|
ifPerfG826FaultStatusEs OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Errored Seconds threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of errors during a period
|
||
|
|
exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: The number of errored seconds during a
|
||
|
|
period is below the threshold.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 16 }
|
||
|
|
|
||
|
|
ifPerfG826FaultStatusSes OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Severely Errored Seconds threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of severely errored seconds
|
||
|
|
during a period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: The number of severely errored seconds during
|
||
|
|
a period is below the threshold.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 17 }
|
||
|
|
|
||
|
|
ifPerfG826FaultStatusUas OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Unavailable Seconds threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of unavailable seconds during
|
||
|
|
a period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: The number of unavailable seconds during a
|
||
|
|
period is below the threshold.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 18 }
|
||
|
|
|
||
|
|
ifPerfG826FaultStatusBbe OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Background Block Errors threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of background block errors
|
||
|
|
during a period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: The number of background block errors during
|
||
|
|
a period is below the threshold.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfG826Entry 19 }
|
||
|
|
|
||
|
|
ifPerfG826UpId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identity in the UP for the Perf Admin entry
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { ifPerfG826Entry 20 }
|
||
|
|
|
||
|
|
ifPerfG826TribPortId OBJECT-TYPE
|
||
|
|
SYNTAX TribPortIdType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Tributary port id that describes to which high-order
|
||
|
|
tributary port this object belong to.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { ifPerfG826Entry 21 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfL1 l1 group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfL1Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfL1Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL1 performance group contains information and
|
||
|
|
configuration for all ifPerfL1 performance objects. Notice table
|
||
|
|
is uni-directional meaning one entry for each direction."
|
||
|
|
|
||
|
|
::= { ifPerfL1List 1 }
|
||
|
|
|
||
|
|
ifPerfL1Entry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfL1Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfL1 list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfL1Index }
|
||
|
|
::= { ifPerfL1Table 1 }
|
||
|
|
|
||
|
|
IfPerfL1Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfL1Index Unsigned32,
|
||
|
|
ifPerfL1Name MgmtNameString,
|
||
|
|
ifPerfL1ConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfL1Period PerfPeriodWithNA,
|
||
|
|
ifPerfL1Type L1MeasurementTypeWithNA,
|
||
|
|
ifPerfL1MaxUtilization Unsigned32WithNA,
|
||
|
|
ifPerfL1AverageUtilization Unsigned32WithNA,
|
||
|
|
ifPerfL1CurrentUtilization Unsigned32WithNA }
|
||
|
|
|
||
|
|
ifPerfL1Index OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 1 }
|
||
|
|
|
||
|
|
ifPerfL1Name OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'clientL1Rx15m:1:2:1-2',
|
||
|
|
where the textual part indicates the type
|
||
|
|
line/client
|
||
|
|
L1
|
||
|
|
Rx/Tx/Uni/Bi direction type
|
||
|
|
15m/24h time period, 15 minutes or 24 hours
|
||
|
|
|
||
|
|
For the part after the colon the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 2 }
|
||
|
|
|
||
|
|
ifPerfL1ConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 3 }
|
||
|
|
|
||
|
|
ifPerfL1Period OBJECT-TYPE
|
||
|
|
SYNTAX PerfPeriodWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, 15 minute or 24 hour.
|
||
|
|
- 15 minute interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
- 24 hour interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 4 }
|
||
|
|
|
||
|
|
ifPerfL1Type OBJECT-TYPE
|
||
|
|
SYNTAX L1MeasurementTypeWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type of signal the interface expects.
|
||
|
|
|
||
|
|
rx - Only ingoing signal.
|
||
|
|
|
||
|
|
tx - Only outgoing signal.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 5 }
|
||
|
|
|
||
|
|
ifPerfL1MaxUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 6 }
|
||
|
|
|
||
|
|
ifPerfL1AverageUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 7 }
|
||
|
|
|
||
|
|
ifPerfL1CurrentUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Current bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL1Entry 8 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfL0 l0 group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfL0Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfL0Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL0 performance group contains information and
|
||
|
|
configuration for all ifPerfL0 performance objects."
|
||
|
|
|
||
|
|
::= { ifPerfL0List 1 }
|
||
|
|
|
||
|
|
ifPerfL0Entry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfL0Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfL0 list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfL0Index }
|
||
|
|
::= { ifPerfL0Table 1 }
|
||
|
|
|
||
|
|
IfPerfL0Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfL0Index Unsigned32,
|
||
|
|
ifPerfL0Name MgmtNameString,
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfL0RxPower Signed32WithNA,
|
||
|
|
ifPerfL0TxPower Signed32WithNA,
|
||
|
|
ifPerfL0InitialRxPower Signed32WithNA,
|
||
|
|
ifPerfL0ChromaticDispersion Signed32WithNA,
|
||
|
|
ifPerfL0DifferentialGroupDelay Unsigned32WithNA,
|
||
|
|
ifPerfL0InitialDifferentialGroupDelay Unsigned32WithNA,
|
||
|
|
ifPerfL0UpId Unsigned32,
|
||
|
|
ifPerfL0OpticalSNR Unsigned32WithNA,
|
||
|
|
ifPerfL0QFactor Unsigned32WithNA}
|
||
|
|
|
||
|
|
ifPerfL0Index OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 1 }
|
||
|
|
|
||
|
|
ifPerfL0Name OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'clientL0:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 2 }
|
||
|
|
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 3 }
|
||
|
|
|
||
|
|
ifPerfL0RxPower OBJECT-TYPE
|
||
|
|
SYNTAX Signed32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Received power in units of 0.1 dBm.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 4 }
|
||
|
|
|
||
|
|
ifPerfL0TxPower OBJECT-TYPE
|
||
|
|
SYNTAX Signed32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Transmitted power in units of 0.1 dBm.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 5 }
|
||
|
|
|
||
|
|
ifPerfL0InitialRxPower OBJECT-TYPE
|
||
|
|
SYNTAX Signed32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial received power in units of 0.1 dBm.
|
||
|
|
The value is set using the install command.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 6}
|
||
|
|
|
||
|
|
ifPerfL0ChromaticDispersion OBJECT-TYPE
|
||
|
|
SYNTAX Signed32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Received chromatic dispersion that describe the spreading of a light
|
||
|
|
pulse as it travels down a fiber when light pulses launched close together.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 7 }
|
||
|
|
|
||
|
|
ifPerfL0DifferentialGroupDelay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The arrival time difference between two polarization states at
|
||
|
|
the output of the media (fiber).
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 8 }
|
||
|
|
|
||
|
|
ifPerfL0InitialDifferentialGroupDelay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The initial received differential group delay in units of picoseconds.
|
||
|
|
The value is set using the install command.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 9 }
|
||
|
|
|
||
|
|
ifPerfL0UpId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identity in the UP for the Perf Admin entry
|
||
|
|
"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { ifPerfL0Entry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
ifPerfL0OpticalSNR OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"OSNR of the received signal (dB/0.1nm) reported by the coherent module receiver.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 11 }
|
||
|
|
|
||
|
|
ifPerfL0QFactor OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Pre-FEC Q factor (dB).
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL0Entry 12 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfL2Stat L2 group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfL2StatTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfL2StatEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2Stat performance group contains information and
|
||
|
|
configuration for all ifPerfL2Stat performance objects."
|
||
|
|
|
||
|
|
::= { ifPerfL2StatList 1 }
|
||
|
|
|
||
|
|
ifPerfL2StatEntry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfL2StatEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfL2Stat list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfL2StatIndex }
|
||
|
|
::= { ifPerfL2StatTable 1 }
|
||
|
|
|
||
|
|
IfPerfL2StatEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfL2StatIndex Unsigned32,
|
||
|
|
ifPerfL2StatName MgmtNameString,
|
||
|
|
ifPerfL2StatConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfL2StatPeriod PerfPeriodWithNA,
|
||
|
|
ifPerfL2StatType L2MeasurementTypeWithNA,
|
||
|
|
|
||
|
|
-- Ethernet traffic data
|
||
|
|
ifPerfL2StatCurrentFrames Counter64,
|
||
|
|
ifPerfL2StatCurrentBytes Counter64,
|
||
|
|
ifPerfL2StatCurrentUnicastFrames Counter64,
|
||
|
|
ifPerfL2StatCurrentMulticastFrames Counter64,
|
||
|
|
ifPerfL2StatCurrentBroadcastFrames Counter64,
|
||
|
|
ifPerfL2StatMaxUtilization Unsigned32WithNA,
|
||
|
|
ifPerfL2StatAverageUtilization Unsigned32WithNA,
|
||
|
|
ifPerfL2StatCurrentUtilization Unsigned32WithNA }
|
||
|
|
|
||
|
|
ifPerfL2StatIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 1 }
|
||
|
|
|
||
|
|
ifPerfL2StatName OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'clientL2:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 2 }
|
||
|
|
|
||
|
|
ifPerfL2StatConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 3 }
|
||
|
|
|
||
|
|
ifPerfL2StatPeriod OBJECT-TYPE
|
||
|
|
SYNTAX PerfPeriodWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, 15 minute or 24 hour.
|
||
|
|
- 15 minute interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
- 24 hour interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 4 }
|
||
|
|
|
||
|
|
ifPerfL2StatType OBJECT-TYPE
|
||
|
|
SYNTAX L2MeasurementTypeWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type of signal the interface expects.
|
||
|
|
|
||
|
|
rx - Only ingoing signal.
|
||
|
|
|
||
|
|
tx - Only outgoing signal.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 5 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of Ethernet frames during a particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 6 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of bytes during a particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 7 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentUnicastFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of Ethernet unicast frames during a
|
||
|
|
particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 8 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentMulticastFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of Ethernet multicast frames during a
|
||
|
|
particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 9 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentBroadcastFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of Ethernet broadcast frames during a
|
||
|
|
particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 10 }
|
||
|
|
|
||
|
|
ifPerfL2StatMaxUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 11 }
|
||
|
|
|
||
|
|
ifPerfL2StatAverageUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The average bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 12 }
|
||
|
|
|
||
|
|
ifPerfL2StatCurrentUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Current bandwidth utilization of the received or
|
||
|
|
transmitted signal during a particular 15 minute or
|
||
|
|
24 hour interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2StatEntry 13 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- IfPerfL2Error L2 group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfL2ErrorTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfL2ErrorEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2Error performance group contains information and
|
||
|
|
configuration for all ifPerfL2Error performance objects."
|
||
|
|
|
||
|
|
::= { ifPerfL2ErrorList 1 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorEntry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfL2ErrorEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerfL2Error list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfL2ErrorIndex }
|
||
|
|
::= { ifPerfL2ErrorTable 1 }
|
||
|
|
|
||
|
|
IfPerfL2ErrorEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfL2ErrorIndex Unsigned32,
|
||
|
|
ifPerfL2ErrorName MgmtNameString,
|
||
|
|
ifPerfL2ErrorConnIfPerfAdminIfIndex Unsigned32WithNA,
|
||
|
|
ifPerfL2ErrorPeriod PerfPeriodWithNA,
|
||
|
|
ifPerfL2ErrorType L2MeasurementTypeWithNA,
|
||
|
|
|
||
|
|
-- Ethernet traffic data
|
||
|
|
ifPerfL2ErrorCurrentUndersizedFrames Counter64,
|
||
|
|
ifPerfL2ErrorCurrentOversizedFrames Counter64,
|
||
|
|
ifPerfL2ErrorCurrentFragments Counter64,
|
||
|
|
ifPerfL2ErrorCurrentFcsErrors Counter64,
|
||
|
|
|
||
|
|
-- Ethernet traffic thresholds
|
||
|
|
ifPerfL2ErrorUndersizedFramesThreshold Counter64,
|
||
|
|
ifPerfL2ErrorOversizedFramesThreshold Counter64,
|
||
|
|
ifPerfL2ErrorFragmentsThreshold Counter64,
|
||
|
|
ifPerfL2ErrorFcsErrorsThreshold Counter64,
|
||
|
|
|
||
|
|
-- Ethernet traffic fault statuses
|
||
|
|
ifPerfL2ErrorUndersizedFramesFault FaultStatusWithNA,
|
||
|
|
ifPerfL2ErrorOversizedFramesFault FaultStatusWithNA,
|
||
|
|
ifPerfL2ErrorFragmentsFault FaultStatusWithNA,
|
||
|
|
ifPerfL2ErrorFcsErrorsFault FaultStatusWithNA }
|
||
|
|
|
||
|
|
ifPerfL2ErrorIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 1 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorName OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the performance object,
|
||
|
|
for example 'clientL2:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 2 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 3 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorPeriod OBJECT-TYPE
|
||
|
|
SYNTAX PerfPeriodWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, 15 minute or 24 hour.
|
||
|
|
- 15 minute interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
- 24 hour interval measurements per
|
||
|
|
measurement point
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 4 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorType OBJECT-TYPE
|
||
|
|
SYNTAX L2MeasurementTypeWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction type of signal the interface expects.
|
||
|
|
|
||
|
|
rx - Only ingoing signal.
|
||
|
|
|
||
|
|
tx - Only outgoing signal.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 5 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorCurrentUndersizedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of undersized Ethernet frames during a
|
||
|
|
particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 6 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorCurrentOversizedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of oversized Ethernet frames during a
|
||
|
|
particular interval.
|
||
|
|
Frames with a length over 9600 bytes are counted
|
||
|
|
as oversized frames.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 7 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorCurrentFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of fragmented Ethernet frames during a
|
||
|
|
particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 8 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorCurrentFcsErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of Ethernet frames with FCS or alignment
|
||
|
|
errors during a particular interval.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 9 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorUndersizedFramesThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold for the undersized frames alarm.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { ifPerfL2ErrorEntry 10 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorOversizedFramesThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold for the oversized frames alarm.
|
||
|
|
A value 0 (zero) will disable the alarm.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { ifPerfL2ErrorEntry 11 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorFragmentsThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold for the fragmented frames alarm.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { ifPerfL2ErrorEntry 12 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorFcsErrorsThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the threshold for the FCS errors alarm.
|
||
|
|
|
||
|
|
"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { ifPerfL2ErrorEntry 13 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorUndersizedFramesFault OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Undersized frames threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of undersized frames during a
|
||
|
|
period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: At the start of a new period the associated
|
||
|
|
undersized frames counter is reset to zero.
|
||
|
|
At the same time the fault status is cleared.
|
||
|
|
|
||
|
|
"
|
||
|
|
|
||
|
|
::= { ifPerfL2ErrorEntry 14 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorOversizedFramesFault OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Oversized frames threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of oversized frames during a
|
||
|
|
period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: At the start of a new period the associated
|
||
|
|
oversized frames counter is reset to zero.
|
||
|
|
At the same time the fault status is cleared.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 15 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorFragmentsFault OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Fragments threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of fragmented frames during a
|
||
|
|
period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: At the start of a new period the associated
|
||
|
|
fragmented frames counter is reset to zero.
|
||
|
|
At the same time the fault status is cleared.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 16 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorFcsErrorsFault OBJECT-TYPE
|
||
|
|
SYNTAX FaultStatusWithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"FCS errors threshold exceeded.
|
||
|
|
|
||
|
|
alarm: The number of FCS or alignment errors during a
|
||
|
|
period exceeds the associated threshold.
|
||
|
|
|
||
|
|
ok: At the start of a new period the associated
|
||
|
|
FCS error counter is reset to zero.
|
||
|
|
At the same time the fault status is cleared.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfL2ErrorEntry 17 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Delay measurement group
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfDelayTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IfPerfDelayEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Delay group group contains information and
|
||
|
|
configuration for the delay measurment of line ports."
|
||
|
|
|
||
|
|
::= { ifPerfDelayList 1 }
|
||
|
|
|
||
|
|
ifPerfDelayEntry OBJECT-TYPE
|
||
|
|
SYNTAX IfPerfDelayEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the ifPerf Delay list.
|
||
|
|
|
||
|
|
"
|
||
|
|
INDEX { ifPerfDelayIndex }
|
||
|
|
::= { ifPerfDelayTable 1 }
|
||
|
|
|
||
|
|
IfPerfDelayEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ifPerfDelayIndex Unsigned32,
|
||
|
|
ifPerfDelayUId Unsigned32,
|
||
|
|
ifPerfDelayName MgmtNameString,
|
||
|
|
ifPerfDelayTwoWayFiberDelay Unsigned32WithNA,
|
||
|
|
ifPerfDelayConnIfPerfAdminIfIndex Unsigned32WithNA}
|
||
|
|
|
||
|
|
ifPerfDelayIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfDelayEntry 1 }
|
||
|
|
|
||
|
|
ifPerfDelayUId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An unique identifier assigned to each entry.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfDelayEntry 2 }
|
||
|
|
|
||
|
|
ifPerfDelayName OBJECT-TYPE
|
||
|
|
SYNTAX MgmtNameString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The management name of the object,
|
||
|
|
for example 'delay:1:2:1-2', where the first number indicates
|
||
|
|
subrack, the second slot number and the third/fourth
|
||
|
|
are the physical port numbers.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfDelayEntry 3 }
|
||
|
|
|
||
|
|
ifPerfDelayTwoWayFiberDelay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured delay in ns.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfDelayEntry 4 }
|
||
|
|
|
||
|
|
ifPerfDelayConnIfPerfAdminIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32WithNA
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes to which index in ifPerfAdminIf table
|
||
|
|
this object is related.
|
||
|
|
|
||
|
|
"
|
||
|
|
::= { ifPerfDelayEntry 5 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Notifications
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Object and event groups
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
ifPerfGeneralGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfGeneralConfigLastChangeTime,
|
||
|
|
ifPerfGeneralStateLastChangeTime,
|
||
|
|
ifPerfGeneralAdminTableSize,
|
||
|
|
ifPerfGeneralAdminConfigLastChangeTime,
|
||
|
|
ifPerfGeneralAdminStateLastChangeTime,
|
||
|
|
ifPerfGeneralFecTableSize,
|
||
|
|
ifPerfGeneralFecConfigLastChangeTime,
|
||
|
|
ifPerfGeneralFecStateLastChangeTime,
|
||
|
|
ifPerfGeneralG826TableSize,
|
||
|
|
ifPerfGeneralG826ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralG826StateLastChangeTime,
|
||
|
|
ifPerfGeneralL1TableSize,
|
||
|
|
ifPerfGeneralL1ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL1StateLastChangeTime,
|
||
|
|
ifPerfGeneralL0TableSize,
|
||
|
|
ifPerfGeneralL0ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL0StateLastChangeTime }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The general objects."
|
||
|
|
::= { lumIfPerfGroups 1 }
|
||
|
|
|
||
|
|
ifPerfAdminGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfAdminIndex,
|
||
|
|
ifPerfAdminName,
|
||
|
|
ifPerfAdminConnIfBasicIfIndex,
|
||
|
|
ifPerfAdminAdminStatus,
|
||
|
|
ifPerfAdminReportMode,
|
||
|
|
ifPerfAdminOperStatus,
|
||
|
|
ifPerfAdminIsSuspect15m,
|
||
|
|
ifPerfAdminIsSuspect24h,
|
||
|
|
ifPerfAdminReset15m,
|
||
|
|
ifPerfAdminReset24h}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfAdmin objects."
|
||
|
|
::= { lumIfPerfGroups 2 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 3 }
|
||
|
|
|
||
|
|
|
||
|
|
ifPerfG826GroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfG826Index,
|
||
|
|
ifPerfG826Name,
|
||
|
|
ifPerfG826ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfG826Period,
|
||
|
|
ifPerfG826Type,
|
||
|
|
ifPerfG826MonitorLevel,
|
||
|
|
ifPerfG826MonitorChannel,
|
||
|
|
ifPerfG826CounterEs,
|
||
|
|
ifPerfG826CounterSes,
|
||
|
|
ifPerfG826CounterUas,
|
||
|
|
ifPerfG826CounterBbe,
|
||
|
|
ifPerfG826ThresholdEs,
|
||
|
|
ifPerfG826ThresholdSes,
|
||
|
|
ifPerfG826ThresholdUas,
|
||
|
|
ifPerfG826ThresholdBbe,
|
||
|
|
ifPerfG826FaultStatusEs,
|
||
|
|
ifPerfG826FaultStatusSes,
|
||
|
|
ifPerfG826FaultStatusUas,
|
||
|
|
ifPerfG826FaultStatusBbe}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfG826 objects."
|
||
|
|
::= { lumIfPerfGroups 4 }
|
||
|
|
|
||
|
|
ifPerfL1GroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL1Index,
|
||
|
|
ifPerfL1Name,
|
||
|
|
ifPerfL1ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL1Period,
|
||
|
|
ifPerfL1Type,
|
||
|
|
ifPerfL1MaxUtilization,
|
||
|
|
ifPerfL1AverageUtilization }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL1 objects."
|
||
|
|
::= { lumIfPerfGroups 5 }
|
||
|
|
|
||
|
|
ifPerfL0GroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL0Index,
|
||
|
|
ifPerfL0Name,
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL0RxPower,
|
||
|
|
ifPerfL0TxPower,
|
||
|
|
ifPerfL0InitialRxPower }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL0 objects."
|
||
|
|
::= { lumIfPerfGroups 6 }
|
||
|
|
|
||
|
|
ifPerfGeneralGroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfGeneralConfigLastChangeTime,
|
||
|
|
ifPerfGeneralStateLastChangeTime,
|
||
|
|
ifPerfGeneralAdminTableSize,
|
||
|
|
ifPerfGeneralAdminConfigLastChangeTime,
|
||
|
|
ifPerfGeneralAdminStateLastChangeTime,
|
||
|
|
ifPerfGeneralFecTableSize,
|
||
|
|
ifPerfGeneralFecConfigLastChangeTime,
|
||
|
|
ifPerfGeneralFecStateLastChangeTime,
|
||
|
|
ifPerfGeneralG826TableSize,
|
||
|
|
ifPerfGeneralG826ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralG826StateLastChangeTime,
|
||
|
|
ifPerfGeneralL1TableSize,
|
||
|
|
ifPerfGeneralL1ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL1StateLastChangeTime,
|
||
|
|
ifPerfGeneralL0TableSize,
|
||
|
|
ifPerfGeneralL0ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL0StateLastChangeTime,
|
||
|
|
ifPerfGeneralL2StatTableSize,
|
||
|
|
ifPerfGeneralL2StatConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL2StatStateLastChangeTime,
|
||
|
|
ifPerfGeneralL2ErrorTableSize,
|
||
|
|
ifPerfGeneralL2ErrorConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL2ErrorStateLastChangeTime }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The general objects."
|
||
|
|
::= { lumIfPerfGroups 7 }
|
||
|
|
|
||
|
|
ifPerfL2StatGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL2StatIndex,
|
||
|
|
ifPerfL2StatName,
|
||
|
|
ifPerfL2StatConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL2StatPeriod,
|
||
|
|
ifPerfL2StatType,
|
||
|
|
ifPerfL2StatCurrentFrames,
|
||
|
|
ifPerfL2StatCurrentBytes,
|
||
|
|
ifPerfL2StatCurrentUnicastFrames,
|
||
|
|
ifPerfL2StatCurrentMulticastFrames,
|
||
|
|
ifPerfL2StatCurrentBroadcastFrames }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2Stat objects."
|
||
|
|
::= { lumIfPerfGroups 8 }
|
||
|
|
|
||
|
|
ifPerfL1GroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL1Index,
|
||
|
|
ifPerfL1Name,
|
||
|
|
ifPerfL1ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL1Period,
|
||
|
|
ifPerfL1Type,
|
||
|
|
ifPerfL1MaxUtilization,
|
||
|
|
ifPerfL1AverageUtilization,
|
||
|
|
ifPerfL1CurrentUtilization }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2 objects."
|
||
|
|
::= { lumIfPerfGroups 9 }
|
||
|
|
|
||
|
|
ifPerfL0GroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL0Index,
|
||
|
|
ifPerfL0Name,
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL0RxPower,
|
||
|
|
ifPerfL0TxPower,
|
||
|
|
ifPerfL0InitialRxPower,
|
||
|
|
ifPerfL0ChromaticDispersion,
|
||
|
|
ifPerfL0DifferentialGroupDelay,
|
||
|
|
ifPerfL0InitialDifferentialGroupDelay}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL0 objects."
|
||
|
|
::= { lumIfPerfGroups 10 }
|
||
|
|
|
||
|
|
ifPerfL2ErrorGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL2ErrorIndex,
|
||
|
|
ifPerfL2ErrorName,
|
||
|
|
ifPerfL2ErrorConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL2ErrorPeriod,
|
||
|
|
ifPerfL2ErrorType,
|
||
|
|
ifPerfL2ErrorCurrentUndersizedFrames,
|
||
|
|
ifPerfL2ErrorCurrentOversizedFrames,
|
||
|
|
ifPerfL2ErrorCurrentFragments,
|
||
|
|
ifPerfL2ErrorCurrentFcsErrors,
|
||
|
|
ifPerfL2ErrorUndersizedFramesThreshold,
|
||
|
|
ifPerfL2ErrorOversizedFramesThreshold,
|
||
|
|
ifPerfL2ErrorFragmentsThreshold,
|
||
|
|
ifPerfL2ErrorFcsErrorsThreshold,
|
||
|
|
ifPerfL2ErrorUndersizedFramesFault,
|
||
|
|
ifPerfL2ErrorOversizedFramesFault,
|
||
|
|
ifPerfL2ErrorFragmentsFault,
|
||
|
|
ifPerfL2ErrorFcsErrorsFault }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2Error objects."
|
||
|
|
::= { lumIfPerfGroups 11 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer,
|
||
|
|
ifPerfFecCorrectedBits}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 12 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV3 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer,
|
||
|
|
ifPerfFecCorrectedBits,
|
||
|
|
ifPerfFecRxBitErrorEstimation}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 13 }
|
||
|
|
|
||
|
|
ifPerfAdminGroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfAdminIndex,
|
||
|
|
ifPerfAdminName,
|
||
|
|
ifPerfAdminConnIfBasicIfIndex,
|
||
|
|
ifPerfAdminAdminStatus,
|
||
|
|
ifPerfAdminReportMode,
|
||
|
|
ifPerfAdminOperStatus,
|
||
|
|
ifPerfAdminIsSuspect15m,
|
||
|
|
ifPerfAdminIsSuspect24h,
|
||
|
|
ifPerfAdminReset15m,
|
||
|
|
ifPerfAdminReset24h,
|
||
|
|
ifPerfAdminUpId}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfAdmin objects. (R26)"
|
||
|
|
::= { lumIfPerfGroups 14 }
|
||
|
|
|
||
|
|
ifPerfG826GroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfG826Index,
|
||
|
|
ifPerfG826Name,
|
||
|
|
ifPerfG826ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfG826Period,
|
||
|
|
ifPerfG826Type,
|
||
|
|
ifPerfG826MonitorLevel,
|
||
|
|
ifPerfG826MonitorChannel,
|
||
|
|
ifPerfG826CounterEs,
|
||
|
|
ifPerfG826CounterSes,
|
||
|
|
ifPerfG826CounterUas,
|
||
|
|
ifPerfG826CounterBbe,
|
||
|
|
ifPerfG826ThresholdEs,
|
||
|
|
ifPerfG826ThresholdSes,
|
||
|
|
ifPerfG826ThresholdUas,
|
||
|
|
ifPerfG826ThresholdBbe,
|
||
|
|
ifPerfG826FaultStatusEs,
|
||
|
|
ifPerfG826FaultStatusSes,
|
||
|
|
ifPerfG826FaultStatusUas,
|
||
|
|
ifPerfG826FaultStatusBbe,
|
||
|
|
ifPerfG826UpId}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfG826 objects."
|
||
|
|
::= { lumIfPerfGroups 15 }
|
||
|
|
|
||
|
|
ifPerfL2StatGroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL2StatIndex,
|
||
|
|
ifPerfL2StatName,
|
||
|
|
ifPerfL2StatConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL2StatPeriod,
|
||
|
|
ifPerfL2StatType,
|
||
|
|
ifPerfL2StatCurrentFrames,
|
||
|
|
ifPerfL2StatCurrentBytes,
|
||
|
|
ifPerfL2StatCurrentUnicastFrames,
|
||
|
|
ifPerfL2StatCurrentMulticastFrames,
|
||
|
|
ifPerfL2StatCurrentBroadcastFrames,
|
||
|
|
ifPerfL2StatMaxUtilization,
|
||
|
|
ifPerfL2StatAverageUtilization,
|
||
|
|
ifPerfL2StatCurrentUtilization }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL2Stat objects."
|
||
|
|
::= { lumIfPerfGroups 16 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV4 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer,
|
||
|
|
ifPerfFecCorrectedBits,
|
||
|
|
ifPerfFecRxBitErrorEstimation,
|
||
|
|
ifPerfFecOpticalSNR }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 17 }
|
||
|
|
|
||
|
|
ifPerfL0GroupV3 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL0Index,
|
||
|
|
ifPerfL0Name,
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL0RxPower,
|
||
|
|
ifPerfL0TxPower,
|
||
|
|
ifPerfL0InitialRxPower,
|
||
|
|
ifPerfL0ChromaticDispersion,
|
||
|
|
ifPerfL0DifferentialGroupDelay,
|
||
|
|
ifPerfL0InitialDifferentialGroupDelay,
|
||
|
|
ifPerfL0UpId}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL0 objects."
|
||
|
|
::= { lumIfPerfGroups 18 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV5 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer,
|
||
|
|
ifPerfFecCorrectedBits,
|
||
|
|
ifPerfFecRxBitErrorEstimation,
|
||
|
|
ifPerfFecOpticalSNR,
|
||
|
|
ifPerfFecUpId}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 19 }
|
||
|
|
|
||
|
|
ifPerfGeneralGroupV3 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfGeneralConfigLastChangeTime,
|
||
|
|
ifPerfGeneralStateLastChangeTime,
|
||
|
|
ifPerfGeneralAdminTableSize,
|
||
|
|
ifPerfGeneralAdminConfigLastChangeTime,
|
||
|
|
ifPerfGeneralAdminStateLastChangeTime,
|
||
|
|
ifPerfGeneralFecTableSize,
|
||
|
|
ifPerfGeneralFecConfigLastChangeTime,
|
||
|
|
ifPerfGeneralFecStateLastChangeTime,
|
||
|
|
ifPerfGeneralG826TableSize,
|
||
|
|
ifPerfGeneralG826ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralG826StateLastChangeTime,
|
||
|
|
ifPerfGeneralL1TableSize,
|
||
|
|
ifPerfGeneralL1ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL1StateLastChangeTime,
|
||
|
|
ifPerfGeneralL0TableSize,
|
||
|
|
ifPerfGeneralL0ConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL0StateLastChangeTime,
|
||
|
|
ifPerfGeneralL2StatTableSize,
|
||
|
|
ifPerfGeneralL2StatConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL2StatStateLastChangeTime,
|
||
|
|
ifPerfGeneralL2ErrorTableSize,
|
||
|
|
ifPerfGeneralL2ErrorConfigLastChangeTime,
|
||
|
|
ifPerfGeneralL2ErrorStateLastChangeTime,
|
||
|
|
ifPerfGeneralDelayTableSize,
|
||
|
|
ifPerfGeneralDelayConfigLastChangeTime,
|
||
|
|
ifPerfGeneralDelayStateLastChangeTime }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The general objects."
|
||
|
|
::= { lumIfPerfGroups 20 }
|
||
|
|
|
||
|
|
ifPerfDelayGroupV1 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfDelayIndex,
|
||
|
|
ifPerfDelayUId,
|
||
|
|
ifPerfDelayName,
|
||
|
|
ifPerfDelayTwoWayFiberDelay }
|
||
|
|
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The Delay objects."
|
||
|
|
::= { lumIfPerfGroups 21 }
|
||
|
|
|
||
|
|
ifPerfDelayGroupV2 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfDelayIndex,
|
||
|
|
ifPerfDelayUId,
|
||
|
|
ifPerfDelayName,
|
||
|
|
ifPerfDelayTwoWayFiberDelay,
|
||
|
|
ifPerfDelayConnIfPerfAdminIfIndex }
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Delay objects."
|
||
|
|
::= { lumIfPerfGroups 22 }
|
||
|
|
|
||
|
|
ifPerfFecGroupV6 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfFecIndex,
|
||
|
|
ifPerfFecName,
|
||
|
|
ifPerfFecConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfFecCorrectedZeros,
|
||
|
|
ifPerfFecCorrectedOnes,
|
||
|
|
ifPerfFecRxBerEstimation,
|
||
|
|
ifPerfFecRxAvgPreFecBer,
|
||
|
|
ifPerfFecCorrectedBits,
|
||
|
|
ifPerfFecRxBitErrorEstimation,
|
||
|
|
ifPerfFecOpticalSNR,
|
||
|
|
ifPerfFecUpId,
|
||
|
|
ifPerfFecQMargin,
|
||
|
|
ifPerfFecPreFecBer}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfFec objects."
|
||
|
|
::= { lumIfPerfGroups 23 }
|
||
|
|
|
||
|
|
ifPerfL0GroupV4 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfL0Index,
|
||
|
|
ifPerfL0Name,
|
||
|
|
ifPerfL0ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfL0RxPower,
|
||
|
|
ifPerfL0TxPower,
|
||
|
|
ifPerfL0InitialRxPower,
|
||
|
|
ifPerfL0ChromaticDispersion,
|
||
|
|
ifPerfL0DifferentialGroupDelay,
|
||
|
|
ifPerfL0InitialDifferentialGroupDelay,
|
||
|
|
ifPerfL0OpticalSNR,
|
||
|
|
ifPerfL0UpId,
|
||
|
|
ifPerfL0QFactor}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfL0 objects."
|
||
|
|
::= { lumIfPerfGroups 24 }
|
||
|
|
|
||
|
|
ifPerfG826GroupV3 OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ifPerfG826Index,
|
||
|
|
ifPerfG826Name,
|
||
|
|
ifPerfG826ConnIfPerfAdminIfIndex,
|
||
|
|
ifPerfG826Period,
|
||
|
|
ifPerfG826Type,
|
||
|
|
ifPerfG826MonitorLevel,
|
||
|
|
ifPerfG826MonitorChannel,
|
||
|
|
ifPerfG826CounterEs,
|
||
|
|
ifPerfG826CounterSes,
|
||
|
|
ifPerfG826CounterUas,
|
||
|
|
ifPerfG826CounterBbe,
|
||
|
|
ifPerfG826ThresholdEs,
|
||
|
|
ifPerfG826ThresholdSes,
|
||
|
|
ifPerfG826ThresholdUas,
|
||
|
|
ifPerfG826ThresholdBbe,
|
||
|
|
ifPerfG826FaultStatusEs,
|
||
|
|
ifPerfG826FaultStatusSes,
|
||
|
|
ifPerfG826FaultStatusUas,
|
||
|
|
ifPerfG826FaultStatusBbe,
|
||
|
|
ifPerfG826UpId,
|
||
|
|
ifPerfG826TribPortId}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifPerfG826 objects."
|
||
|
|
::= { lumIfPerfGroups 25 }
|
||
|
|
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
-- Compliance
|
||
|
|
-- ----------------------------------------------------
|
||
|
|
|
||
|
|
lumIfPerfComplV1 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV1,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV1,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV1,
|
||
|
|
ifPerfL0GroupV1 }
|
||
|
|
::= { lumIfPerfCompl 1 }
|
||
|
|
|
||
|
|
lumIfPerfComplV2 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV1,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV1,
|
||
|
|
ifPerfL0GroupV1,
|
||
|
|
ifPerfL2StatGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 2 }
|
||
|
|
|
||
|
|
lumIfPerfComplV3 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV1,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV1,
|
||
|
|
ifPerfL2StatGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 3 }
|
||
|
|
|
||
|
|
lumIfPerfComplV4 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV1,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV2,
|
||
|
|
ifPerfL2StatGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 4 }
|
||
|
|
|
||
|
|
lumIfPerfComplV5 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV1,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV2,
|
||
|
|
ifPerfL2StatGroupV1,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 5 }
|
||
|
|
|
||
|
|
lumIfPerfComplV6 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV2,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV2,
|
||
|
|
ifPerfL2StatGroupV1,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 6 }
|
||
|
|
|
||
|
|
lumIfPerfComplV7 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV1,
|
||
|
|
ifPerfFecGroupV3,
|
||
|
|
ifPerfG826GroupV1,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV2,
|
||
|
|
ifPerfL2StatGroupV1,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 7 }
|
||
|
|
|
||
|
|
lumIfPerfComplV8 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R26)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV4,
|
||
|
|
ifPerfG826GroupV2,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV2,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 8 }
|
||
|
|
|
||
|
|
lumIfPerfComplV9 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R26)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV4,
|
||
|
|
ifPerfG826GroupV2,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV3,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 9 }
|
||
|
|
|
||
|
|
lumIfPerfComplV10 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R26)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV2,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV5,
|
||
|
|
ifPerfG826GroupV2,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV3,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 10 }
|
||
|
|
|
||
|
|
lumIfPerfComplV11 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R27.1)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV3,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV5,
|
||
|
|
ifPerfG826GroupV2,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV3,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1,
|
||
|
|
ifPerfDelayGroupV1 }
|
||
|
|
::= { lumIfPerfCompl 11 }
|
||
|
|
|
||
|
|
lumIfPerfComplV12 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R29)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV3,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV5,
|
||
|
|
ifPerfG826GroupV2,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV3,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1,
|
||
|
|
ifPerfDelayGroupV2 }
|
||
|
|
::= { lumIfPerfCompl 12 }
|
||
|
|
|
||
|
|
|
||
|
|
lumIfPerfComplV13 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Basic implementation requirements for the ifPerf MIB. (R32.1)"
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ifPerfGeneralGroupV3,
|
||
|
|
ifPerfAdminGroupV2,
|
||
|
|
ifPerfFecGroupV6,
|
||
|
|
ifPerfG826GroupV3,
|
||
|
|
ifPerfL1GroupV2,
|
||
|
|
ifPerfL0GroupV4,
|
||
|
|
ifPerfL2StatGroupV2,
|
||
|
|
ifPerfL2ErrorGroupV1,
|
||
|
|
ifPerfDelayGroupV2 }
|
||
|
|
::= { lumIfPerfCompl 13 }
|
||
|
|
|
||
|
|
END
|
||
|
|
|