mibs/MIBS/inteno/XAVI-XG6846-MIB

--*****************************************************************
-- XAVI-XG6846-MIB.my : XAVI Inteno MIB file
--      
-- This MIB defines DSL CPE configuration Management Information Base.
-- The following objects are part of the enterprise MIB for Broadcom  DSL.
--
-- 2012/03/21 Dom Hsu <dom_hsu@xavi.com.tw>
--
-- XAVi Technologies Corp. 2012. All Rights Reserved
--
--*****************************************************************

XAVI-XG6846-MIB	DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
	TimeTicks, Counter32, snmpModules, enterprises, mib-2, IpAddress, Integer32
        	FROM SNMPv2-SMI
	DisplayString, TestAndIncr, TimeStamp
		FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
		FROM SNMPv2-CONF;

xg6846          OBJECT IDENTIFIER ::= { enterprises 12919 }

catv            OBJECT IDENTIFIER ::= { xg6846 1 } 
portmode        OBJECT IDENTIFIER ::= { xg6846 2 }
qos             OBJECT IDENTIFIER ::= { xg6846 3 } 
vlan            OBJECT IDENTIFIER ::= { xg6846 4 }
portStatistic   OBJECT IDENTIFIER ::= { xg6846 5 } 
ddminfo         OBJECT IDENTIFIER ::= { xg6846 6 } 
internetPort    OBJECT IDENTIFIER ::= { xg6846 7 }
reboot          OBJECT IDENTIFIER ::= { xg6846 8 }
tftp            OBJECT IDENTIFIER ::= { xg6846 9 }
portPower       OBJECT IDENTIFIER ::= { xg6846 10 } 
jumb            OBJECT IDENTIFIER ::= { xg6846 11 } 
deviceinfo      OBJECT IDENTIFIER ::= { xg6846 12 } 

catvEnable OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(2)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"catv switch function."
			::= { catv 1 }

lanportTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ModeEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"LAN port table."
			::= { portmode 1 }

modeEntry OBJECT-TYPE
	SYNTAX ModeEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"set port mode entry."
	INDEX { lanportIndex }
		::= { lanportTable 1 }
	ModeEntry ::= SEQUENCE {
		lanportIndex Unsigned32,
		lanportName  DisplayString,
		lanportspeed INTEGER,
		lanportpause INTEGER
	}

lanportIndex OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"lan port entry index."
			::= { modeEntry 1 }

lanportName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"lan port name."
			::= { modeEntry 2 }

lanportspeed OBJECT-TYPE
	SYNTAX INTEGER {
		auto(0),
		speed10mFD(1),
		speed10mHD(2),
		speed100mFD(3),
		speed100mHD(4)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port speed value."
			::= { modeEntry 3 }

lanportpause OBJECT-TYPE
	SYNTAX INTEGER {
		off(0),
		on(1)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port 802.1P enable/disable value."
			::= { modeEntry 4 }

qosTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"qos table."
			::= { qos 1 }

qosEntry OBJECT-TYPE
	SYNTAX QosEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION 
		"qos list entry."
	INDEX { qosIndex }
		::= { qosTable 1 }
	QosEntry ::= SEQUENCE {
		qosIndex Unsigned32,
		qmapping Unsigned32
	}

qosIndex OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"qos list entry index."
			::= { qosEntry 1 }

qmapping OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"mapping queue value."
			::= { qosEntry 2 }

portTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SettingEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"all port setting table."
			::= { vlan 1 }

portEntry OBJECT-TYPE
	SYNTAX SettingEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port list entry."
	INDEX { portIndex }
		::= { portTable 1 }
	SettingEntry ::= SEQUENCE {
		portIndex  Unsigned32,
		vlanid     Unsigned32,
		priority   Unsigned32,
		qmode      INTEGER,
		dscpEnable INTEGER			        
	}

portIndex OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"port num index."
			::= { portEntry 1 }

vlanid OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port vlan id value."
			::= { portEntry 2 }

priority OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port default priority value."
			::= { portEntry 3 }

qmode OBJECT-TYPE
	SYNTAX INTEGER {
		disable(0),
		fallback(1),
		check(2),
		secure(3)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port 802.1Q mode value."
			::= { portEntry 4 }

dscpEnable OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"DSCP enable."
			::= { portEntry 5 }

vlangroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF GroupEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"VLAN group setting table."
			::= { vlan 2 }

groupEntry OBJECT-TYPE
	SYNTAX GroupEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group list entry."
	INDEX { groupIndex }
		::= { vlangroupTable 1 }
	GroupEntry ::= SEQUENCE {
		groupIndex Unsigned32,
		groupid    Unsigned32,
		lan1       INTEGER,
		lan2       INTEGER,
		lan3       INTEGER,
		lan4       INTEGER,
		wan        INTEGER
	}

groupIndex OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"vlan group index."
			::= { groupEntry 1 }

groupid OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 2 }

lan1 OBJECT-TYPE
	SYNTAX INTEGER {
		notMember(0),
		egressUntagged(1),
		egressTagged(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 3 }

lan2 OBJECT-TYPE
	SYNTAX INTEGER {
		notMember(0),
		egressUntagged(1),
		egressTagged(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 4 }

lan3 OBJECT-TYPE
	SYNTAX INTEGER {
		notMember(0),
		egressUntagged(1),
		egressTagged(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 5 }

lan4 OBJECT-TYPE
	SYNTAX INTEGER {
		notMember(0),
		egressUntagged(1),
		egressTagged(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 6 }

wan OBJECT-TYPE
	SYNTAX INTEGER {
		notMember(0),
		egressUntagged(1),
		egressTagged(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"vlan group id."
			::= { groupEntry 7 }

statisticTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortStatEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port statistics table."
			::= { portStatistic 1 }

portStatEntry OBJECT-TYPE
	SYNTAX PortStatEntry
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"port statistics list entry."
	INDEX { statIndex }
		::= { statisticTable 1 }
	PortStatEntry ::= SEQUENCE {
		statIndex            Unsigned32,
		portName             DisplayString,
		unicastsReceived     Unsigned32,
		broadcastsReceived   Unsigned32,
		multicastsReceived   Unsigned32,
		fcsErrorReceived     Unsigned32,
		pauseReceived        Unsigned32,
		unicastsTransmitted   Unsigned32,
		broadcastsTransmitted Unsigned32,
		multicastsTransmitted Unsigned32,
		fcsErrorTransmitted   Unsigned32,
		pauseTransmitted      Unsigned32,
		speed                DisplayString        			
	}

statIndex OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"ports entry index."
			::= { portStatEntry 1 }

portName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"port name."
			::= { portStatEntry 2 }

unicastsReceived OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"unicasts Received."
			::= { portStatEntry 3 }

broadcastsReceived OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"broadcasts Received."
			::= { portStatEntry 4 }

multicastsReceived OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"multicasts Received."
			::= { portStatEntry 5 }

fcsErrorReceived OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"fcsError Received."
			::= { portStatEntry 6 }

pauseReceived OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"pause Received."
			::= { portStatEntry 7 }

unicastsTransmitted OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"unicasts Transmitted."
			::= { portStatEntry 8 }

broadcastsTransmitted OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"broadcasts Transmitted."
			::= { portStatEntry 9 }

multicastsTransmitted OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"multicasts Transmitted."
			::= { portStatEntry 10 }

fcsErrorTransmitted OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"fcsError Transmitted."
			::= { portStatEntry 11 }

pauseTransmitted OBJECT-TYPE
	SYNTAX Unsigned32
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"pause Transmitted."
			::= { portStatEntry 12 }

speed OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"port speed duplex mode status."
			::= { portStatEntry 13 }

vendorName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Vendor Name."
			::= { ddminfo 1 }

vendorOui OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Vendor OUI."
			::= { ddminfo 2 }

vendorPn OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Vendor PN."
			::= { ddminfo 3 }

vendorRev OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Vendor REV."
			::= { ddminfo 4 }

temperature OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Temperature."
			::= { ddminfo 5 }

voltage OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Voltage."
			::= { ddminfo 6 }

bias OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Bias."
			::= { ddminfo 7 }

txPower OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM TX Power."
			::= { ddminfo 8 }

rxPower OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"DDM Rx Power."
			::= { ddminfo 9 }

wanType OBJECT-TYPE
	SYNTAX INTEGER {
		dhcp(1),
		staticIp(2)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"wan protocol type."
			::= { internetPort 1 }

hostname OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS  read-write
	STATUS current
	DESCRIPTION
		"the dns host name."
			::= { internetPort 2 }

domainame OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the dns domain name."
			::= { internetPort 3 }

staticDns OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(2)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"static dns enable."
			::= { internetPort 4 }

primaryDns OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the primary dns."
			::= { internetPort 5 }

secondaryDns OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the secodary dns."
			::= { internetPort 6 }

staticIpHostName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS  read-write
	STATUS current
	DESCRIPTION
		"the static Ip dns host name."
			::= { internetPort 7 }

staticIpDomainName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the static ip dns domain name."
			::= { internetPort 8 }

staticIpAddr OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"The static ip address ."
			::= { internetPort 9 }

staticIpSubMask OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"The static subnet mask ."
			::=  { internetPort 10 }

staticIpGateway OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"The static gateway ."
			::=  { internetPort 11 }

staticIpPrimaryDns OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the primary dns."
			::= { internetPort 12 }

staticIpSecondaryDns OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"the secodary dns."
			::= { internetPort 13 }

rebootEnable OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"catv switch function."
			::= { reboot 1 }

tftpSevIp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"The tftp server ip."
			::= { tftp 1 }

fileName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"The file name."
			::= { tftp 2 }

fileType OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		" i for image and c for configuration data"
			::=  { tftp 3 }

action OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"Get or Put file action,g for get file and p for put file."
			::= { tftp 4 }

adminStatus OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(2)
	}
	ACCESS read-write
	STATUS current
	DESCRIPTION
		"administrative status."
			::= { tftp 5 }

operStatus OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(2)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"vendor specific info."
			::= { tftp 6 }

port1 OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan port enable/disable."
			::= { portPower 1 }

port2 OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan port enable/disable."
			::= { portPower 2 }

port3 OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan port enable/disable."
			::= { portPower 3 }

port4 OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(0)
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan port enable/disable."
			::= { portPower 4 }

jumblan1 OBJECT-TYPE
	SYNTAX INTEGER {
		mode1(0),
		mode2(1),
		mode3(2),
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan jumb mode 1522/2048/10240."
			::= { jumb 1 }

jumblan2 OBJECT-TYPE
	SYNTAX INTEGER {
		mode1(0),
		mode2(1),
		mode3(2),
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan jumb mode 1522/2048/10240."
			::= { jumb 2 }

jumblan3 OBJECT-TYPE
	SYNTAX INTEGER {
		mode1(0),
		mode2(1),
		mode3(2),
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan jumb mode 1522/2048/10240."
			::= { jumb 3 }

jumblan4 OBJECT-TYPE
	SYNTAX INTEGER {
		mode1(0),
		mode2(1),
		mode3(2),
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan jumb mode 1522/2048/10240."
			::= { jumb 4 }

jumbwan OBJECT-TYPE
	SYNTAX INTEGER {
		mode1(0),
		mode2(1),
		mode3(2),
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"lan jumb mode 1522/2048/10240."
			::= { jumb 5 }

serialnum OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION
		"display device serial number."
			::= { deviceinfo 1 }
END