david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ipinfusion/CMM-CHASSIS-MIB

4576 lines
160 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CMM-CHASSIS-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for cmm modules
--
-- This module will be extended, as needed.
--
IMPORTS
OBJECT-TYPE,
Gauge32, Counter32, Unsigned32,
TimeTicks, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, DisplayString,
MacAddress, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
enterprises,OBJECT-IDENTITY
FROM SNMPv2-SMI
ipi FROM OCNOS-IPI-MODULE-MIB;
cmm MODULE-IDENTITY
LAST-UPDATED "201711091200Z" -- Nov 09, 2017 12:00:00 GMT
ORGANIZATION
"IPI."
CONTACT-INFO
"support@ipinfusion.com"
DESCRIPTION
"The Structure of CMM Management Information for
the IPI enterprise."
::= { ipi 100 }
-- ### Groups ###
CmmChassisObject OBJECT IDENTIFIER ::={ cmm 1 }
cmmObjects OBJECT IDENTIFIER ::={ CmmChassisObject 1 }
cmmSysObjects OBJECT IDENTIFIER ::={ CmmChassisObject 2 }
cmmAlarmObjects OBJECT IDENTIFIER ::={ CmmChassisObject 3 }
-- ### Textual Convention
LedColorCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The color code value for led's in the unit."
SYNTAX INTEGER {
none(1),
green(2),
blinking-green(3),
solid-green(4),
amber(5),
blinking-amber(6),
solid-amber(7),
red(8),
blinking-red(9),
solid-red(10),
blue(11),
blinking-blue(12),
yellow(13),
blinking-yellow(14),
orange(15),
slow-blinking-green(16),
fast-blinking-green(17),
unknown(30)
}
SystemStatusCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The components for system status in the unit.
Value '0' means there is no fault in the system."
SYNTAX BITS {
cpu(0),
ram(1),
disk(2),
low-temperature(3),
high-temperature(4),
fan(5),
power(6),
software(7)
}
-- ### Chassis Information
cmmNumStackUnits OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stack units configured
on the chassis."
::= { cmmObjects 1 }
-- ### Chassis System ###
-- ## StackUnit Table
-- The Cmm chassis is a single virtual system to
-- have the stackable units as virtual slots.
-- In the chassis, there can be multiple physical units
-- stacked together.
-- The StackUnit table contains the management information
-- of each stacked unit in the chassis.
cmmStackUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmStackUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing information
for each stacked unit."
::= { cmmSysObjects 1 }
cmmStackUnitEntry OBJECT-TYPE
SYNTAX CmmStackUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries containing information
for each stacked unit."
INDEX { cmmStackUnitIndex }
::= { cmmStackUnitTable 1 }
CmmStackUnitEntry ::=
SEQUENCE {
cmmStackUnitIndex INTEGER,
cmmStackUnitModelName DisplayString,
cmmStackUnitSerialNumber DisplayString,
cmmStackUnitUpTime TimeTicks,
cmmStackUnitMfgDate DateAndTime,
cmmStackUnitMacAddress MacAddress,
cmmStackUnitPartNum DisplayString,
cmmStackLabelRevision DisplayString,
cmmStackUnitCountryCode OCTET STRING,
cmmStackUnitServiceTag DisplayString,
cmmStackPlatformName DisplayString,
cmmStackOnieVersion DisplayString,
cmmStackMfgName DisplayString,
cmmStackVendorName DisplayString,
cmmStackDiagVersion DisplayString,
cmmStackCrc32 OCTET STRING,
cmmStackUnitNumFanControllers INTEGER,
cmmStackUnitNumFanTrays INTEGER,
cmmStackUnitNumPowerSupplies INTEGER,
cmmStackUnitNumPluggableModules INTEGER,
cmmStackUnitNumFastEtherPorts INTEGER,
cmmStackUnitNumGigEtherPorts INTEGER,
cmmStackUnitNum10GigEtherPorts INTEGER,
cmmStackUnitNum25GigEtherPorts INTEGER,
cmmStackUnitNum40GigEtherPorts INTEGER,
cmmStackUnitNum50GigEtherPorts INTEGER,
cmmStackUnitNum100GigEtherPorts INTEGER,
cmmStackUnitSwitchChipRev DisplayString,
cmmStackSupportedLabelRevision DisplayString,
cmmStackUnitSupportedSwitchChipRev DisplayString
}
cmmStackUnitIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique stack unit number."
::= { cmmStackUnitEntry 1 }
cmmStackUnitModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The plugged-in model name for this unit.
Blank indicates unavailable"
::= { cmmStackUnitEntry 2 }
cmmStackUnitSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's serial number.
Blank indicates unavailable"
::= { cmmStackUnitEntry 3 }
cmmStackUnitUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system up time of the unit."
::= { cmmStackUnitEntry 4 }
cmmStackUnitMfgDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date the unit is manufactured.
Blank indicates unavailable"
::= { cmmStackUnitEntry 5 }
cmmStackUnitMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet MAC Address assigned to this unit."
::= { cmmStackUnitEntry 6 }
cmmStackUnitPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit part number.
Blank indicates unavailable"
::= { cmmStackUnitEntry 7 }
cmmStackLabelRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's label Revision.
Blank indicates unavailable"
::= { cmmStackUnitEntry 8 }
cmmStackUnitCountryCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit manufacturer's country code."
::= { cmmStackUnitEntry 9 }
cmmStackUnitServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's service tag.
Blank indicates unavailable"
::= { cmmStackUnitEntry 10 }
cmmStackPlatformName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Platform Name for the Unit.
Blank indicates unavailable"
::= { cmmStackUnitEntry 11 }
cmmStackOnieVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's ONIE Version.
Blank indicates unavailable"
::= { cmmStackUnitEntry 12 }
cmmStackMfgName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Manufacturer Name.
Blank indicates unavailable"
::= { cmmStackUnitEntry 13 }
cmmStackVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Vendor Name.
Blank indicates unavailable"
::= { cmmStackUnitEntry 14 }
cmmStackDiagVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Diagnostic Version.
Blank indicates unavailable"
::= { cmmStackUnitEntry 15 }
cmmStackCrc32 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's Cyclic Redundancy Check 32 Bit value in hex."
::= { cmmStackUnitEntry 16 }
cmmStackUnitNumFanControllers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fan controllers on the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 17 }
cmmStackUnitNumFanTrays OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fan trays on the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 18 }
cmmStackUnitNumPowerSupplies OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of power supplies available to the unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 19 }
cmmStackUnitNumPluggableModules OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of pluggable modules in the stack.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 20 }
cmmStackUnitNumFastEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100M Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 21 }
cmmStackUnitNumGigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 1G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 22 }
cmmStackUnitNum10GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 10G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 23 }
cmmStackUnitNum25GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 25G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 24 }
cmmStackUnitNum40GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 40G Ethernet/802.3 interfaces in this unit.
'-100001' indicates unavailable"
::= { cmmStackUnitEntry 25 }
cmmStackUnitNum50GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 50G Ethernet/802.3 interfaces
in this unit. '-100001' indicates unavailable"
::= { cmmStackUnitEntry 26 }
cmmStackUnitNum100GigEtherPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100G Ethernet/802.3 interfaces
in this unit. '-100001' indicates unavailable"
::= { cmmStackUnitEntry 27 }
cmmStackUnitSwitchChipRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit's Switch Chip Revision."
::= { cmmStackUnitEntry 28 }
cmmStackSupportedLabelRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit's supported label Revision.
Blank indicates unavailable"
::= { cmmStackUnitEntry 29 }
cmmStackUnitSupportedSwitchChipRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Unit's Switch Supported Chip Revision."
::= { cmmStackUnitEntry 30 }
-- ## Transceiver EEPROM Entry
cmmTransEEPROMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmTransEEPROMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Transceiver entry containing eeprom related objects for a particular port."
::= { cmmSysObjects 2 }
cmmTransEEPROMEntry OBJECT-TYPE
SYNTAX CmmTransEEPROMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Transceiver entry containing eeprom related objects for a particular port."
INDEX { cmmStackUnitIndex,
cmmTransIndex }
::= { cmmTransEEPROMTable 1 }
CmmTransEEPROMEntry::=
SEQUENCE {
cmmTransIndex INTEGER,
cmmTransType INTEGER,
cmmTransNoOfChannels INTEGER,
cmmTransidentifier INTEGER,
cmmTransSFPextendedidentifier INTEGER,
cmmTransQSFPextendedidentifier BITS,
cmmTransconnectortype INTEGER,
cmmTransEthCompliance INTEGER,
cmmTransExtEthCompliance BITS,
cmmTransSonetCompliance BITS,
cmmTransFiberChnlLinkLen BITS,
cmmTransFiberChnlTransTech BITS,
cmmTransFiberChnlTransMedia BITS,
cmmTransSFPFiberChnlSpeed BITS,
cmmTransQSFPFiberChnlSpeed BITS,
cmmTransSFPInfiniBandCompliance INTEGER,
cmmTransSFPEsconCompliance INTEGER,
cmmTransSfpPlusCableTech INTEGER,
cmmTransEncoding INTEGER,
cmmTransLengthKmtrs INTEGER,
cmmTransLengthMtrs INTEGER,
cmmTransLengthOM1 INTEGER,
cmmTransLengthOM2 INTEGER,
cmmTransLengthOM3 INTEGER,
cmmTransLengthOM4 INTEGER,
cmmTransVendorName DisplayString,
cmmTransVendorOUI DisplayString,
cmmTransVendorPartNumber DisplayString,
cmmTransVendorRevision DisplayString,
cmmTransCheckCode OCTET STRING,
cmmTransCheckCodeExtended OCTET STRING,
cmmTransNominalBitRate INTEGER,
cmmTransBitRateMax INTEGER,
cmmTransBitRateMin INTEGER,
cmmTransVendorSerialNumber DisplayString,
cmmTransDateCode DisplayString,
cmmTransDDMSupport INTEGER,
cmmTransMaxCaseTemp INTEGER,
cmmTransSFPOptionsImp BITS,
cmmTransQSFPOptionsImp BITS,
cmmTransPresence INTEGER
cmmTransFrontPanelPortNumber INTEGER
}
cmmTransIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A unique value, greater than zero,for each slot within the unit"
::= { cmmTransEEPROMEntry 1 }
cmmTransType OBJECT-TYPE
SYNTAX INTEGER {
sfp(1),
qsfp(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver type"
::= { cmmTransEEPROMEntry 2 }
cmmTransNoOfChannels OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of channels available for this transceiver.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 3 }
cmmTransidentifier OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
gbic(2),
soldered-to-motherboard(3),
sfp-or-sfpplus-or-sfp28(4),
xbi-300pin(5),
xenpak(6),
xep(7),
xff(8),
xfpe(9),
xpak(10),
x2(11),
dwdmsfp-or-dwdmsfpplus(12),
qsfp(13),
qsfpplus-or-later(14),
cxp-or-later(15),
shielded-mini-multilane-hd4x(16),
shielded-mini-multilane-hd8x(17),
qsfp28-or-later(18),
cxp2-aka-cxp28-or-later(19),
cdfpstyle1-or-cdfpstyle2(20),
shielded-mini-multilane-hd4x-fanoutcable(21),
shielded-mini-multilane-hd8x-fanoutcable(22),
cdfpstyle3(23),
microqsfp(24),
qsfp-doubledensity-8x-pluggable-transceiver(25),
reserved(26),
vendor-specific(27)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28."
::= { cmmTransEEPROMEntry 4 }
cmmTransSFPextendedidentifier OBJECT-TYPE
SYNTAX INTEGER {
gbic-notspecified-or-compliant-with-moddef(1),
gbic-compliant-with-moddef1(2),
gbic-compliant-with-moddef2(3),
gbic-compliant-with-moddef3(4),
gbic-or-sfp-definedby-twowire-interfaceid-only (5),
gbic-compliant-with-moddef5(6),
gbic-compliant-with-moddef6(7),
gbic-compliant-with-moddef7(8),
unallocated(9),
unknown(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extended identifier of SFP transceiver for additional information."
::= { cmmTransEEPROMEntry 5 }
cmmTransQSFPextendedidentifier OBJECT-TYPE
SYNTAX BITS {
powerclass1-1dot5wmax(0),
powerclass2-2wmax(1),
powerclass3-2dot5wmax(2),
powerclass4-3dot5wmax(3),
cleicode-present(4),
cdrpresent-in-tx(5),
cdrpresent-in-rx(6),
powerclass5-4wmax(7),
powerclass6-4dot5wmax(8),
powerclass7-5wmax(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extended identifier of QSFP transceiver for additional information.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 6 }
cmmTransconnectortype OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
subscriber-connector(2),
fibrechannel-style1-copperconnector(3),
fibrechannel-style2-copperconnector(4),
bayonet-or-threaded-neill-concelman(5),
fibrechannel-coaxheaders(6),
fiber-jack(7),
lucent-connector(8),
mechanical-transfer-registeredjack(9),
multiple-optical(10),
sg(11),
optical-pigtail(12),
multifiber-paralleloptic-1x12(13),
multifiber-paralleloptic-1x16(14),
reserved(15),
hssdcii(16),
copper-pigtail(17),
rj45(18),
no-separable-connector(19),
mxc2-x16(20),
reserved(21),
vendor-specific(22)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connector type for the transceiver."
::= { cmmTransEEPROMEntry 7 }
cmmTransEthCompliance OBJECT-TYPE
SYNTAX INTEGER {
ec-unknown(1),
ec-10gbase-sr(2),
ec-10gbase-lr(3),
ec-10gbase-lrm(4),
ec-10gbase-er(5),
ec-1000base-sx(6),
ec-1000base-lx(7),
ec-1000base-cx(8),
ec-1000base-t(9),
ec-100base-lx-or-lx10(10),
ec-100base-fx(11),
ec-base-bx10(12),
ec-base-px(13),
ec-40gbase-cr4(14),
ec-40gbase-sr4(15),
ec-40gbase-lr4(16),
ec-40g-activecable(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Values of Ethernet Compliance codes."
::= { cmmTransEEPROMEntry 8 }
cmmTransExtEthCompliance OBJECT-TYPE
SYNTAX BITS {
eec-unspecified(0),
eec-100g-activeopticalcable-or-25g-auic2maoc(1),
eec-100gbase-sr4-or-25gbase-sr(2),
eec-100gbase-lr4-or-25gbase-lr(3),
eec-100gbase-er4-or-25gbase-er(4),
eec-100gbase-sr10(5),
eec-100g-cwdm4(6),
eec-100g-psm4-parallelsmf(7),
eec-100g-activecoppercable-or-25g-auic2macc(8),
eec-obsolete(9),
eec-reserved(10),
eec-100gbase-cr4-or-25gbase-crca-l(11),
eec-25gbase-crca-s(12),
eec-25gbase-crca-n(13),
eec-40gbase-er4(14),
eec-4x10gbase-sr(15),
eec-40g-psm4-parallelsmf(16),
eec-g959-dot1-profilep1-i1-2d1(17),
eec-g959-dot1-profilep1-s1-2d2(18),
eec-g959-dot1-profilep1-l1-2d2(19),
eec-100gbase-t-with-sfi-electricalinterface(20),
eec-100g-clr4(21),
eec-100g-aoc-or-25g-auic2maoc(22),
eec-100g-acc-or-25g-auic2macc(23),
eec-100ge-dwdm2(24)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of Extended Ethernet Compliance codes.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 9 }
cmmTransSonetCompliance OBJECT-TYPE
SYNTAX BITS {
oc192-shortreach(0),
sonet-reachspecifier-bit1(1),
sonet-reachspecifier-bit2(2),
oc48-longreach(3),
oc48-intermediatereach(4),
oc48-shortreach(5),
oc12-singlemode-longreach(6),
oc12-singlemode-intermediatereach(7),
oc12-singlemode-shortreach(8),
oc3-singlemode-longreach(9),
oc3-singlemode-intermediatereach(10),
oc3-singlemode-shortreach(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sonet Compliance codes of transceiver.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 10 }
cmmTransFiberChnlLinkLen OBJECT-TYPE
SYNTAX BITS {
short(0),
medium(1),
intermediate(2),
long(3),
verylong(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Link Length.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 11 }
cmmTransFiberChnlTransTech OBJECT-TYPE
SYNTAX BITS {
shortwaveLaserLinearRx(0),
longwaveLaserLC(1),
electricalInter-Enclosure(2),
electricalIntra-Enclosure(3),
shortwaveLaserWithOutOFC(4),
shortwaveLaserwithOFC(5),
longwaveLaserLL(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Transmitter Technology.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 12 }
cmmTransFiberChnlTransMedia OBJECT-TYPE
SYNTAX BITS {
twinaxial-pair(0),
twisted-pair(1),
miniature-coax(2),
video-coax(3),
multi-mode62dot5m(4),
multi-mode50m(5),
multi-mode50um(6),
single-mode(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fiber Channel Transmitter Media.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 13 }
cmmTransSFPFiberChnlSpeed OBJECT-TYPE
SYNTAX BITS {
fcs-3200mbps(0),
fcs-1600mbps(1),
fcs-1200mbps(2),
fcs-800mbps(3),
fcs-400mbps(4),
fcs-200mbps(5),
fcs-100mbps(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Fiber Channel Speed.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 14 }
cmmTransQSFPFiberChnlSpeed OBJECT-TYPE
SYNTAX BITS {
fcs-3200mbps(0),
fcs-1600mbps(1),
fcs-1200mbps(2),
fcs-800mbps(3),
fcs-400mbps(4),
fcs-200mbps(5),
fcs-100mbps(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QSFP Fiber Channel Speed.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 15 }
cmmTransSFPInfiniBandCompliance OBJECT-TYPE
SYNTAX INTEGER {
ibc-1xsx(1),
ibc-1xlx(2),
ibc-1xcopperactive(3),
ibc-1xcopperpassive(4),
ibc-unknown(5),
ibc-notapplicable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP InfiniBand Compliance."
::= { cmmTransEEPROMEntry 16 }
cmmTransSFPEsconCompliance OBJECT-TYPE
SYNTAX INTEGER {
escon-mmf-1310nm-led(1),
escon-smf-1310nm-laser(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Enterprise Systems Connection compliance."
::= { cmmTransEEPROMEntry 17 }
cmmTransSfpPlusCableTech OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP+ Cable Technology."
::= { cmmTransEEPROMEntry 18 }
cmmTransEncoding OBJECT-TYPE
SYNTAX INTEGER {
enc-unspecified(1),
enc-8b-or-10b(2),
enc-4b-or-5b(3),
enc-nrz(4),
enc-manchester(5),
enc-sonet-scrambled(6),
enc-64b-or-66b(7),
enc-256b-or-257b(8),
enc-pam4(9),
enc-reserved(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code for high speed serial encoding algorithm."
::= { cmmTransEEPROMEntry 19 }
cmmTransLengthKmtrs OBJECT-TYPE
SYNTAX INTEGER
UNITS "km"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for single mode fiber, units of km.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 20 }
cmmTransLengthMtrs OBJECT-TYPE
SYNTAX INTEGER
UNITS "100 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for single mode fiber, units of 100 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 21 }
cmmTransLengthOM1 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 62.5 um OM1 fiber, units of 10 m.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 22 }
cmmTransLengthOM2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM2 fiber, units of 10 m.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 23 }
cmmTransLengthOM3 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM3 fiber, units of 10 m.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 24 }
cmmTransLengthOM4 OBJECT-TYPE
SYNTAX INTEGER
UNITS "10 m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link length supported for 50 um OM4 fiber, units of 10 m.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 25 }
cmmTransVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vendor name.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 26 }
cmmTransVendorOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vendor IEEE company ID.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 27 }
cmmTransVendorPartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part number provided by tarnsceiver vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 28 }
cmmTransVendorRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision level for part number provided by vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 29 }
cmmTransCheckCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Check code for Base ID Fields.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 30 }
cmmTransCheckCodeExtended OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Check code for the Extended ID Fields.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 31 }
cmmTransNominalBitRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "100MBd"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nominal signalling rate, units of 100MBd.
'-100001' indicates unavailable"
::= { cmmTransEEPROMEntry 32 }
cmmTransBitRateMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upper bit rate margin, units of 1% above the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 33 }
cmmTransBitRateMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lower bit rate margin, units of 1% below the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 34 }
cmmTransVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number provided by vendor.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 35 }
cmmTransDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor's manufacturing date code.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 36 }
cmmTransDDMSupport OBJECT-TYPE
SYNTAX INTEGER{
yes(1),
no(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether diagnostics monitoring is
supported or not."
::= { cmmTransEEPROMEntry 37 }
cmmTransMaxCaseTemp OBJECT-TYPE
SYNTAX INTEGER
UNITS " 0.01 C "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum case temperature in Celsius.'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmTransEEPROMEntry 38 }
cmmTransSFPOptionsImp OBJECT-TYPE
SYNTAX BITS {
reserved(0),
power-level3(1),
paging(2),
internal-retimer-or-cdr(3),
cooled-laser-transmitter(4),
power-level2(5),
power-level1(6),
linear-receiver-output(7),
receiver-decision-threshold(8),
transmitter-wavelength-or-tunable-frequency(9),
rate-select(10),
tx-disable(11),
tx-fault(12),
rx-loss-of-signal(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Options Implemented for SFP Transceiver.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 39 }
cmmTransQSFPOptionsImp OBJECT-TYPE
SYNTAX BITS {
reserved(0),
tx-inputequalization-auto-adaptive(1),
tx-inputequalization-fixed-programmable(2),
tx-outputemphasis-fixed-programmable(3),
tx-outputamplitude-fixed-programmable(4),
tx-cdr-on-or-off-controllable(5),
tx-cdr-on-or-off-fixed(6),
rx-cdr-on-or-off-controllable(7),
rx-cdr-on-or-off-fixed(8),
tx-cdr-lossoflock(9),
rx-cdr-lossoflock(10),
rx-squelch-disable(11),
rx-output-disable(12),
tx-squelch-disable(13),
tx-squelch(14),
page2-provided(15),
page1-provided(16),
rateselect-controllable(17),
rateselect-fixed(18),
tx-disable(19),
tx-fault(20),
tx-squelch-to-reduce-pave(21),
tx-squelch-to-reduce-oma(22),
tx-loss-of-signal(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Options Implemented for QSFP Transceiver.
Blank indicates unavailable"
::= { cmmTransEEPROMEntry 40 }
cmmTransPresence OBJECT-TYPE
SYNTAX INTEGER{
present(1),
notpresent(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Transceiver presence status."
::= { cmmTransEEPROMEntry 41 }
cmmTransFrontPanelPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Front panel port number"
::= { cmmTransEEPROMEntry 42 }
-- ## DDMChannel Entry
cmmTransDDMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmTransDDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for each
interface per channel."
::= { cmmSysObjects 3 }
cmmTransDDMEntry OBJECT-TYPE
SYNTAX CmmTransDDMChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Digital Optical Monitoring for each
interface per channel."
INDEX { cmmStackUnitIndex,
cmmTransIndex,
cmmTransChannelIndex
}
::= { cmmTransDDMTable 1 }
CmmTransDDMChannelEntry ::=
SEQUENCE {
cmmTransChannelIndex INTEGER,
cmmTransTemperature INTEGER,
cmmTransTempCriticalThresholdMin INTEGER,
cmmTransTempCriticalThresholdMax INTEGER,
cmmTransTempAlertThresholdMin INTEGER,
cmmTransTempAlertThresholdMax INTEGER,
cmmTransVoltage INTEGER,
cmmTransVoltCriticalThresholdMin INTEGER,
cmmTransVoltCriticalThresholdMax INTEGER,
cmmTransVoltAlertThresholdMin INTEGER,
cmmTransVoltAlertThresholdMax INTEGER,
cmmTransLaserBiasCurrent INTEGER,
cmmTransLaserBiasCurrCriticalThresholdMin INTEGER,
cmmTransLaserBiasCurrCriticalThresholdMax INTEGER,
cmmTransLaserBiasCurrAlertThresholdMin INTEGER,
cmmTransLaserBiasCurrAlertThresholdMax INTEGER,
cmmTransTxPower INTEGER,
cmmTransTxPowerCriticalThresholdMin INTEGER,
cmmTransTxPowerCriticalThresholdMax INTEGER,
cmmTransTxPowerAlertThresholdMin INTEGER,
cmmTransTxPowerAlertThresholdMax INTEGER,
cmmTransRxPower INTEGER,
cmmTransRxPowerCriticalThresholdMin INTEGER,
cmmTransRxPowerCriticalThresholdMax INTEGER,
cmmTransRxPowerAlertThresholdMin INTEGER,
cmmTransRxPowerAlertThresholdMax INTEGER,
cmmTransTxPowerSupported INTEGER,
cmmTransRxPowerSupported INTEGER,
cmmTransDDMStatus INTEGER,
cmmTransTxState INTEGER,
cmmTransRxLosState INTEGER,
cmmTransTxLosState INTEGER,
cmmTransResetState INTEGER,
cmmTransPowerMode INTEGER
}
cmmTransChannelIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A unique value, greater than zero,for each channel in the transceiver
within the unit. For SFP transceivers, only channel '1' is applicable."
::= { cmmTransDDMEntry 1 }
cmmTransTemperature OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 2 }
cmmTransTempCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 3 }
cmmTransTempCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 4}
cmmTransTempAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alert Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 5}
cmmTransTempAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alert Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 6}
cmmTransVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured supply voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 7 }
cmmTransVoltCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 8 }
cmmTransVoltCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold voltage of the transceiver in Volts.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 9 }
cmmTransVoltAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alert Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 10 }
cmmTransVoltAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alert Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 11 }
cmmTransLaserBiasCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally measured TX Bias Current in Channel of transceiver
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 12 }
cmmTransLaserBiasCurrCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 13 }
cmmTransLaserBiasCurrCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 14 }
cmmTransLaserBiasCurrAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alert Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 15 }
cmmTransLaserBiasCurrAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alert Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 16 }
cmmTransTxPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured TX output power in Channel of transceiver.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 17 }
cmmTransTxPowerCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 18 }
cmmTransTxPowerCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 19 }
cmmTransTxPowerAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alert Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 20 }
cmmTransTxPowerAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alert Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 21 }
cmmTransRxPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured RX input power in Channel of transceiver
'-100000' value represents no power in the transceiver.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 22 }
cmmTransRxPowerCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 23 }
cmmTransRxPowerCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 24 }
cmmTransRxPowerAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Alert Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 25 }
cmmTransRxPowerAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.001 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Alert Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable"
::= { cmmTransDDMEntry 26 }
cmmTransTxPowerSupported OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
unsupported(2),
notapplicable(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TxPower Support"
::= { cmmTransDDMEntry 27 }
cmmTransRxPowerSupported OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
unsupported(2),
notapplicable(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver RxPower Support"
::= { cmmTransDDMEntry 28 }
cmmTransDDMStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
activeunsupported(2),
inactive(3),
inactiveunsupported(4),
notapplicable(5),
unknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver DDM Status"
::= { cmmTransDDMEntry 29 }
cmmTransTxState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TX State"
::= { cmmTransDDMEntry 30 }
cmmTransRxLosState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver RX Los State"
::= { cmmTransDDMEntry 31 }
cmmTransTxLosState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TX Los State (applicable only for QSFP).
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 32 }
cmmTransResetState OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
reset(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Reset State (applicable only for QSFP).
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 33 }
cmmTransPowerMode OBJECT-TYPE
SYNTAX INTEGER {
low(1),
high(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Power mode (applicable only for QSFP).
'-100002' indicates not-applicable."
::= { cmmTransDDMEntry 34 }
-- ### Ram Table
cmmSysRamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysRamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing RAM related information of the Unit."
::= { cmmSysObjects 4 }
cmmSysRamEntry OBJECT-TYPE
SYNTAX CmmSysRamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing RAM related information of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysRamTable 1 }
CmmSysRamEntry ::=
SEQUENCE {
cmmSysRamTotalMem INTEGER,
cmmSysRamUsedMem INTEGER,
cmmSysRamFreeMem INTEGER,
cmmSysRamCriticalThreshold INTEGER,
cmmSysRamAlertThreshold INTEGER
}
cmmSysRamTotalMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total RAM available in this unit.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 1 }
cmmSysRamUsedMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used RAM in this unit.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 2 }
cmmSysRamFreeMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free RAM available in this unit.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 3 }
cmmSysRamCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RAM usage threshold % for Critical level.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 4 }
cmmSysRamAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RAM usage threshold % for Alert level.
'-100001' indicates unavailable"
::= { cmmSysRamEntry 5 }
-- ### cmmStackCpuTable
cmmStackCpuTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmStackCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu load information."
::= { cmmSysObjects 5 }
cmmStackCpuEntry OBJECT-TYPE
SYNTAX CmmStackCpuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu load information."
INDEX { cmmStackUnitIndex }
::= { cmmStackCpuTable 1 }
CmmStackCpuEntry ::=
SEQUENCE {
cmmStackUnitNumCpuProcessor INTEGER,
cmmStackUnitCpuLoad1Min INTEGER,
cmmStackUnitCpuLoad5Min INTEGER,
cmmStackUnitCpuLoad15Min INTEGER,
cmmStackCpuLoad1minAlertThreshold INTEGER,
cmmStackCpuLoad1minCriticalThreshold INTEGER,
cmmStackCpuLoad5minCriticalThreshold INTEGER,
cmmStackCpuLoad15minCriticalThreshold INTEGER,
cmmStackUnitCpuUtilization INTEGER,
cmmStackUnitCpuUtilAlertThreshold INTEGER,
cmmStackUnitCpuUtilCriticalThreshold INTEGER
}
cmmStackUnitNumCpuProcessor OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Online Processors Available.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 1 }
cmmStackUnitCpuLoad1Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 1 minute.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 2 }
cmmStackUnitCpuLoad5Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 5 minutes.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 3 }
cmmStackUnitCpuLoad15Min OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Load in percentage for last 15 minutes.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 4 }
cmmStackCpuLoad1minAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Alert Threshold percentage value for 1 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 5 }
cmmStackCpuLoad1minCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Critical Threshold percentage value for 1 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 6 }
cmmStackCpuLoad5minCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Threshold percentage value for 5 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 7 }
cmmStackCpuLoad15minCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Threshold percentage value for 15 min load.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 8 }
cmmStackUnitCpuUtilization OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Utilization at this instance in percentage for this unit.
'-100001' indicates unavailable"
::= {cmmStackCpuEntry 9 }
cmmStackUnitCpuUtilAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization Alert Threshold %.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 10 }
cmmStackUnitCpuUtilCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization Critical Threshold %.
'-100001' indicates unavailable"
::= { cmmStackCpuEntry 11 }
-- ### Power Supply Table
cmmSysPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A power supply entry containing objects for a
particular power supply Unit."
::= { cmmSysObjects 6 }
cmmSysPowerSupplyEntry OBJECT-TYPE
SYNTAX CmmSysPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A power supply entry containing objects for a
particular power supply Unit."
INDEX { cmmStackUnitIndex,
cmmSysPSUIndex }
::= { cmmSysPowerSupplyTable 1 }
CmmSysPowerSupplyEntry ::=
SEQUENCE {
cmmSysPSUIndex INTEGER,
cmmSysPowerSupplyOperStatus INTEGER,
cmmSysPowerSupplyType INTEGER,
cmmSysHotSwapStat INTEGER,
cmmSysPSConsumption INTEGER,
cmmSysInputPower INTEGER,
cmmSysInputVoltage INTEGER,
cmmSysOutputVoltage INTEGER,
cmmSysInputCurrent INTEGER,
cmmSysOutputCurrent INTEGER,
cmmSysPSTemperature1 INTEGER,
cmmSysPSTemperature2 INTEGER,
cmmSysPSFan1Rpm INTEGER,
cmmSysPSFan2Rpm INTEGER,
cmmSysPS12VPg INTEGER,
cmmSysPSAcAlert INTEGER,
cmmSysPSParamsSupport BITS
}
cmmSysPSUIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index of the power supply."
::= { cmmSysPowerSupplyEntry 1 }
cmmSysPowerSupplyOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
running(2),
faulty(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the power supply."
::= { cmmSysPowerSupplyEntry 2 }
cmmSysPowerSupplyType OBJECT-TYPE
SYNTAX INTEGER {
ac-normal(1),
ac-reverse(2),
dc-normal(3),
dc-reverse(4),
unknown(5),
notapplicable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the power supply."
::= { cmmSysPowerSupplyEntry 3 }
cmmSysHotSwapStat OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status for HOT SWAP."
::= { cmmSysPowerSupplyEntry 4 }
cmmSysPSConsumption OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Power of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 5 }
cmmSysInputPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Power of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 6 }
cmmSysInputVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Voltage of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 7 }
cmmSysOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Voltage of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 8 }
cmmSysInputCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input Current of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 9 }
cmmSysOutputCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output Current of Power supply.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 10 }
cmmSysPSTemperature1 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature of Power supply sensor 1.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 11 }
cmmSysPSTemperature2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature of Power supply sensor 2.
'-100001' indicates unavailable"
::= { cmmSysPowerSupplyEntry 12 }
cmmSysPSFan1Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan1 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 13 }
cmmSysPSFan2Rpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan2 rpm of Power supply.
'-100001' indicates unavailable
'-100002' indicates not-applicable."
::= { cmmSysPowerSupplyEntry 14 }
cmmSysPS12VPg OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Output Power"
::= { cmmSysPowerSupplyEntry 15 }
cmmSysPSAcAlert OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Input Power"
::= { cmmSysPowerSupplyEntry 16 }
cmmSysPSParamsSupport OBJECT-TYPE
SYNTAX BITS {
volt-in(0),
volt-out(1),
curr-in(2),
curr-out(3),
power-in(4),
power-out(5),
temp-1(6),
temp-2(7),
fan-1(8),
fan-2(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of supported paramaters of PSU Unit.
0 - not supported (values only for information)
1 - supported (values can be used for monitoring)
Blank indicates unavailable."
::= { cmmSysPowerSupplyEntry 17 }
-- ## Power Rail Table
cmmSysPowerRailTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysPowerRailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for power rails in the unit."
::= { cmmSysObjects 7 }
cmmSysPowerRailEntry OBJECT-TYPE
SYNTAX CmmSysPowerRailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for power rails in the unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysPowerRailTable 1 }
CmmSysPowerRailEntry ::=
SEQUENCE {
cmmSysPOWERVDDR INTEGER,
cmmSysPOWERCORE INTEGER,
cmmSysV1P1POWERRAIL INTEGER,
cmmSysMAINBOARDPOWERRAIL INTEGER,
cmmSysV1P05POWERRAIL INTEGER,
cmmSysV1P5POWERRAIL INTEGER,
cmmSysVCCPOWERRAIL INTEGER,
cmmSysSBV1P5POWERRAIL INTEGER,
cmmSysV1P0POWERRAIL INTEGER,
cmmSysV3P3POWERRAIL INTEGER,
cmmSysV1P8POWERRAIL INTEGER,
cmmSysV1P35POWERRAIL INTEGER,
cmmSysVCC5V INTEGER,
cmmSysVCC33V INTEGER,
cmmSysVCCMAC1V INTEGER,
cmmSysVCCMACAVS1V INTEGER,
cmmSysVCCV1P05 INTEGER,
cmmSysVCCV1P5 INTEGER,
cmmSysVCCV1P8 INTEGER,
cmmSysVCCAVS1V INTEGER,
cmmSysDDRVTT INTEGER
}
cmmSysPOWERVDDR OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for VCC 3.3v on Main board."
::= { cmmSysPowerRailEntry 1 }
cmmSysPOWERCORE OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for Mac 1v on Main board."
::= { cmmSysPowerRailEntry 2 }
cmmSysV1P1POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for Mac AVS 1v on Main board."
::= { cmmSysPowerRailEntry 3 }
cmmSysMAINBOARDPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status for Main Board."
::= { cmmSysPowerRailEntry 4 }
cmmSysV1P05POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of V1P05POWERRAIL."
::= { cmmSysPowerRailEntry 5 }
cmmSysV1P5POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of V1P5POWERRAIL."
::= { cmmSysPowerRailEntry 6 }
cmmSysVCCPOWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCPOWERRAIL."
::= { cmmSysPowerRailEntry 7 }
cmmSysSBV1P5POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of SBV1P5POWERRAIL."
::= { cmmSysPowerRailEntry 8 }
cmmSysV1P0POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 1.0V Status."
::= { cmmSysPowerRailEntry 9 }
cmmSysV3P3POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 3.3V Status."
::= { cmmSysPowerRailEntry 10 }
cmmSysV1P8POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power rail 1.8V Status."
::= { cmmSysPowerRailEntry 11 }
cmmSysV1P35POWERRAIL OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Rail 1.35 Status."
::= { cmmSysPowerRailEntry 12 }
cmmSysVCC5V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCC 5V."
::= { cmmSysPowerRailEntry 13 }
cmmSysVCC33V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCC 33 V."
::= { cmmSysPowerRailEntry 14 }
cmmSysVCCMAC1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCMAC1V."
::= { cmmSysPowerRailEntry 15 }
cmmSysVCCMACAVS1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCMACAVS1V."
::= { cmmSysPowerRailEntry 16 }
cmmSysVCCV1P05 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Status of VCCV1P05."
::= { cmmSysPowerRailEntry 17 }
cmmSysVCCV1P5 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Status of VCCV1P5."
::= { cmmSysPowerRailEntry 18 }
cmmSysVCCV1P8 OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCV1P8."
::= { cmmSysPowerRailEntry 19 }
cmmSysVCCAVS1V OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power status of VCCAVS1V."
::= { cmmSysPowerRailEntry 20 }
cmmSysDDRVTT OBJECT-TYPE
SYNTAX INTEGER{
good(1),
fail(2),
unknown(3),
notapplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power statistics for VCC 5v on Main board."
::= { cmmSysPowerRailEntry 21 }
-- ## Fan Tray Table
cmmFanTrayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Fan Tray entry containing information of fan tray."
::= { cmmSysObjects 8 }
cmmFanTrayEntry OBJECT-TYPE
SYNTAX CmmFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Fan Tray entry containing information of fan tray."
INDEX { cmmStackUnitIndex,
cmmFanTrayNumber
}
::= { cmmFanTrayTable 1 }
CmmFanTrayEntry ::=
SEQUENCE {
cmmFanTrayNumber INTEGER,
cmmFanTrayStatus INTEGER,
cmmFanTrayLedColor LedColorCode
}
cmmFanTrayNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan tray Number."
::= { cmmFanTrayEntry 1 }
cmmFanTrayStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
present(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan tray status."
::= { cmmFanTrayEntry 2 }
cmmFanTrayLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the fan led."
::= { cmmFanTrayEntry 3 }
-- ## Fan Entry in FanTray Table
cmmFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan entry containing objects for a particular fan in a fan tray."
::= { cmmSysObjects 9 }
cmmFanEntry OBJECT-TYPE
SYNTAX CmmFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan entry containing objects for a particular fan in a fan tray."
INDEX { cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex }
::= { cmmFanTable 1 }
CmmFanEntry ::=
SEQUENCE {
cmmFanIndex INTEGER,
cmmFanRpm INTEGER,
cmmFanRpmMin INTEGER,
cmmFanRpmMax INTEGER,
cmmFanStatus INTEGER,
cmmFanLocation INTEGER
}
cmmFanIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the fan per fantray."
::= { cmmFanEntry 1 }
cmmFanRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the fan rpm.
'-100001' indicates unavailable"
::= { cmmFanEntry 2 }
cmmFanRpmMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the minimum supported RPM of fan.
'-100001' indicates unavailable"
::= { cmmFanEntry 3 }
cmmFanRpmMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the maximum supported RPM of fan.
'-100001' indicates unavailable"
::= { cmmFanEntry 4 }
cmmFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
running(2),
faulty(3),
stalled(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fan."
::= { cmmFanEntry 5 }
cmmFanLocation OBJECT-TYPE
SYNTAX INTEGER {
front(1),
rear(2),
unknown(3),
not-applicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The location of fan in tray"
::= { cmmFanEntry 6 }
-- ## Stack Temperature Table
cmmSysTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temperature sensor"
::= { cmmSysObjects 10 }
cmmSysTemperatureEntry OBJECT-TYPE
SYNTAX CmmSysTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temperature sensor"
INDEX { cmmStackUnitIndex,
cmmSysTemperatureSensorIndex }
::= { cmmSysTemperatureTable 1 }
CmmSysTemperatureEntry ::=
SEQUENCE {
cmmSysTemperatureSensorIndex INTEGER,
cmmSysTemperatureSensorName DisplayString,
cmmSysTemperatureValue INTEGER,
cmmSysTempEmergencyThresholdMin INTEGER,
cmmSysTempEmergencyThresholdMax INTEGER,
cmmSysTempAlertThresholdMin INTEGER,
cmmSysTempAlertThresholdMax INTEGER,
cmmSysTempCriticalThresholdMin INTEGER,
cmmSysTempCriticalThresholdMax INTEGER
}
cmmSysTemperatureSensorIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Index"
::= { cmmSysTemperatureEntry 1 }
cmmSysTemperatureSensorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature Sensor Name.
Blank indicates unavailable"
::= { cmmSysTemperatureEntry 2 }
cmmSysTemperatureValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor value.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 3 }
cmmSysTempEmergencyThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Emergency threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 4 }
cmmSysTempEmergencyThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Emergency threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 5 }
cmmSysTempAlertThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Alert threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 6 }
cmmSysTempAlertThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Alert threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 7 }
cmmSysTempCriticalThresholdMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Min Critical threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 8 }
cmmSysTempCriticalThresholdMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Sensor Max Critical threshold.
'-100001' indicates unavailable"
::= { cmmSysTemperatureEntry 9 }
-- ## Component Status Table
cmmSysComponentStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysComponentStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing each component status in the Unit."
::= { cmmSysObjects 11 }
cmmSysComponentStatusEntry OBJECT-TYPE
SYNTAX CmmSysComponentStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing each component status in the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysComponentStatusTable 1 }
CmmSysComponentStatusEntry ::=
SEQUENCE {
cmmSysPsu1Status INTEGER,
cmmSysPsu1LedColor LedColorCode,
cmmSysPsu2Status INTEGER,
cmmSysPsu2LedColor LedColorCode,
cmmSysLocatorLedStatus INTEGER,
cmmSysLocatorLedColor LedColorCode,
cmmSysMasterLedStatus INTEGER,
cmmSysMasterLedColor LedColorCode,
cmmSysFanStatus INTEGER,
cmmSysFrontFanLedColor LedColorCode,
cmmSysRamStatus INTEGER,
cmmSysCpuStatus INTEGER,
cmmSysDiskStatus INTEGER,
cmmSysTemperatureStatus INTEGER
}
cmmSysPsu1Status OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of PSU1."
::= { cmmSysComponentStatusEntry 1 }
cmmSysPsu1LedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the power led of PSU1."
::= { cmmSysComponentStatusEntry 2 }
cmmSysPsu2Status OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of PSU2."
::= { cmmSysComponentStatusEntry 3 }
cmmSysPsu2LedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the power led of PSU2."
::= { cmmSysComponentStatusEntry 4 }
cmmSysLocatorLedStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
on(2),
off(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Locater led."
::= { cmmSysComponentStatusEntry 5 }
cmmSysLocatorLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the Locator led."
::= { cmmSysComponentStatusEntry 6 }
cmmSysMasterLedStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(1),
on(2),
off(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Master led."
::= { cmmSysComponentStatusEntry 7 }
cmmSysMasterLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the master led."
::= { cmmSysComponentStatusEntry 8 }
cmmSysFanStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall Status of Fans in the Unit."
::= { cmmSysComponentStatusEntry 9 }
cmmSysFrontFanLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the Front Fan led."
::= { cmmSysComponentStatusEntry 10 }
cmmSysRamStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of RAM in the unit."
::= { cmmSysComponentStatusEntry 11 }
cmmSysCpuStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of CPU in the unit."
::= { cmmSysComponentStatusEntry 12 }
cmmSysDiskStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Disk in the unit."
::= { cmmSysComponentStatusEntry 13 }
cmmSysTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
minor-fault(2),
major-fault(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Temperature sensors in the unit."
::= { cmmSysComponentStatusEntry 14 }
-- ## Software Module Table
cmmSysSwModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysSwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Software module information"
::= { cmmSysObjects 12 }
cmmSysSwModuleEntry OBJECT-TYPE
SYNTAX CmmSysSwModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Software module information"
INDEX { cmmStackUnitIndex }
::= { cmmSysSwModuleTable 1 }
CmmSysSwModuleEntry ::=
SEQUENCE {
cmmSysSwRuntimeImgVersion DisplayString,
cmmSysSwRuntimeImgDate DateAndTime
}
cmmSysSwRuntimeImgVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the software
module version that is currently
running on the unit.
The software release version is in
the format as follow:
<major version>.<minor version>.<minor
version>......
'1.2' indicate major version of 1 and
minor release of 2.
Blank indicates unavailable"
::= { cmmSysSwModuleEntry 1 }
cmmSysSwRuntimeImgDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The release date of this software module.
Blank indicates unavailable"
::= { cmmSysSwModuleEntry 2 }
-- ## Switching Chip Temperature Table
cmmSwitchTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSwitchTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temp monitor in switching chip"
::= { cmmSysObjects 13 }
cmmSwitchTemperatureEntry OBJECT-TYPE
SYNTAX CmmSwitchTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A temperature entry containing objects related to particular temp monitor in switching chip"
INDEX { cmmStackUnitIndex,
cmmSwitchTemperatureSensorIndex }
::= { cmmSwitchTemperatureTable 1 }
CmmSwitchTemperatureEntry ::=
SEQUENCE {
cmmSwitchTemperatureSensorIndex INTEGER,
cmmSwitchTemperatureValue INTEGER,
cmmSwitchTempPeakValue INTEGER
}
cmmSwitchTemperatureSensorIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature Monitor Index inside chip.
'-100001' indicates unavailable"
::= { cmmSwitchTemperatureEntry 1 }
cmmSwitchTemperatureValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature monitor value.
'-100001' indicates unavailable"
::= { cmmSwitchTemperatureEntry 2 }
cmmSwitchTempPeakValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents Temperature monitor peak value since last reading.
'-100001' indicates unavailable"
::= { cmmSwitchTemperatureEntry 3 }
-- ## Hard disk Table
cmmSysHardDiskTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysHardDiskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk information of the Unit."
::= { cmmSysObjects 14 }
cmmSysHardDiskEntry OBJECT-TYPE
SYNTAX CmmSysHardDiskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Hard disk information of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSysHardDiskTable 1 }
CmmSysHardDiskEntry ::=
SEQUENCE {
cmmSysHarddiskSerialno DisplayString,
cmmSysHarddiskModelno DisplayString,
cmmSysHarddiskFirmwarerev DisplayString,
cmmSysHarddiskCylinders INTEGER,
cmmSysHarddiskHeads INTEGER,
cmmSysHarddiskSectors INTEGER,
cmmSysHarddiskUnformattedBytesorTrack INTEGER,
cmmSysHarddiskUnformattedBytesorSector INTEGER,
cmmSysHarddiskRevisionNum DisplayString,
cmmSysHarddiskTotalsize INTEGER,
cmmSysHarddiskUsedMem INTEGER,
cmmSysHarddiskFreeMem INTEGER,
cmmSysHarddiskCriticalThreshold INTEGER,
cmmSysHarddiskAlertThreshold INTEGER
}
cmmSysHarddiskSerialno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's serial number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 1 }
cmmSysHarddiskModelno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's model number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 2 }
cmmSysHarddiskFirmwarerev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's firmware revision.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 3 }
cmmSysHarddiskCylinders OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Cylinder unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 4 }
cmmSysHarddiskHeads OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Head unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 5 }
cmmSysHarddiskSectors OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Sector unit.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 6 }
cmmSysHarddiskUnformattedBytesorTrack OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's unformated bytes or track.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 7 }
cmmSysHarddiskUnformattedBytesorSector OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's unformated bytes or sectors.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 8 }
cmmSysHarddiskRevisionNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hard disk's Revision number.
Blank indicates unavailable"
::= { cmmSysHardDiskEntry 9 }
cmmSysHarddiskTotalsize OBJECT-TYPE
SYNTAX INTEGER
UNITS " MBytes "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total memory of the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 10 }
cmmSysHarddiskUsedMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used Memory in the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 11 }
cmmSysHarddiskFreeMem OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free Memory in the Hard disk.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 12 }
cmmSysHarddiskCriticalThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk usage threshold % for Critical Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 13 }
cmmSysHarddiskAlertThreshold OBJECT-TYPE
SYNTAX INTEGER
UNITS " % "
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Harddisk usage threshold % for Alert Level.
'-100001' indicates unavailable"
::= { cmmSysHardDiskEntry 14 }
-- ## System Overall Status Table
cmmSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing overall system status of the Unit."
::= { cmmSysObjects 15 }
cmmSystemStatusEntry OBJECT-TYPE
SYNTAX CmmSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing component status and overall system status of the Unit."
INDEX { cmmStackUnitIndex }
::= { cmmSystemStatusTable 1 }
CmmSystemStatusEntry ::=
SEQUENCE {
cmmSystemMinorFaultStatus SystemStatusCode,
cmmSystemMajorFaultStatus SystemStatusCode,
cmmSysStatus INTEGER,
cmmSysLedColor LedColorCode
}
cmmSystemMinorFaultStatus OBJECT-TYPE
SYNTAX SystemStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"overall Alert status caused by individual components in the unit."
::= { cmmSystemStatusEntry 1 }
cmmSystemMajorFaultStatus OBJECT-TYPE
SYNTAX SystemStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"overall Critical status caused by individual components in the unit."
::= { cmmSystemStatusEntry 2 }
cmmSysStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1), -- self diagnostics test is success
minor-fault(2), -- minor system fault
major-fault(3), -- major system fault
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall Status/Health of System."
::= { cmmSystemStatusEntry 3 }
cmmSysLedColor OBJECT-TYPE
SYNTAX LedColorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value represents the Color of the system led."
::= { cmmSystemStatusEntry 4 }
-- CPU per core utilisation table
cmmCpuCoreUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmCpuCoreUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu utilisation information."
::= { cmmSysObjects 16 }
cmmCpuCoreUtilEntry OBJECT-TYPE
SYNTAX CmmCpuCoreUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing cpu utilisation information."
INDEX { cmmStackUnitIndex, cmmCpuCoreIndex }
::= { cmmCpuCoreUtilTable 1 }
CmmCpuCoreUtilEntry ::=
SEQUENCE {
cmmCpuCoreIndex INTEGER,
cmmCpuCoreUtilization INTEGER,
cmmCpuCoreModelName DisplayString
}
cmmCpuCoreIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Cpu Core number."
::= { cmmCpuCoreUtilEntry 1 }
cmmCpuCoreUtilization OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.01 %"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cpu Utilization per core."
::= { cmmCpuCoreUtilEntry 2 }
cmmCpuCoreModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays CPU processor Model Name.
Blank indicates unavailable"
::= { cmmCpuCoreUtilEntry 3 }
-- ### Psu Fru Table
cmmPsuFruTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmPsuFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A psu fru entry containing objects
for PSU inventory information"
::= { cmmSysObjects 17 }
cmmPsuFruEntry OBJECT-TYPE
SYNTAX CmmPsuFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A psu fru entry containing objects for a
particular power supply Unit."
INDEX { cmmStackUnitIndex, cmmSysPSUIndex }
::= { cmmPsuFruTable 1 }
CmmPsuFruEntry ::=
SEQUENCE {
cmmPsuPpid DisplayString,
cmmPsuCountryofOrigin DisplayString,
cmmPsuPpidPartNum DisplayString,
cmmPsuPpidPartNumRev DisplayString,
cmmPsuManufactureId DisplayString,
cmmPsuDateCode OCTET STRING,
cmmPsuSerialNumber DisplayString,
cmmPsuPartNum DisplayString,
cmmPsuPartNumRev DisplayString,
cmmPsuNumOfFanPerTray INTEGER,
cmmPsuType INTEGER,
cmmPsuServiceTag DisplayString,
cmmPsuIanaNum DisplayString,
cmmPsuFanMaxRpm INTEGER,
cmmPsuAirFlowDir DisplayString,
cmmPsuMaxOutputWatt INTEGER
}
cmmPsuPpid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique ppid of the power supply.
Blank indicates unavailable"
::= { cmmPsuFruEntry 1 }
cmmPsuCountryofOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Country of Origin
Blank indicates unavailable"
::= { cmmPsuFruEntry 2 }
cmmPsuPpidPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 3 }
cmmPsuPpidPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number Rev
Blank indicates unavailable"
::= { cmmPsuFruEntry 4 }
cmmPsuManufactureId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manufacturer ID
Blank indicates unavailable"
::= { cmmPsuFruEntry 5 }
cmmPsuDateCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8 | 11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date Code
Blank indicates unavailable"
::= { cmmPsuFruEntry 6 }
cmmPsuSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 7 }
cmmPsuPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 8 }
cmmPsuPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number Revision
Blank indicates unavailable"
::= { cmmPsuFruEntry 9 }
cmmPsuNumOfFanPerTray OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Fans in the tray
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 10 }
cmmPsuType OBJECT-TYPE
SYNTAX INTEGER {
ac-normal(1),
ac-reverse(2),
dc-normal(3),
dc-reverse(4),
not-applicable(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of psu"
::= { cmmPsuFruEntry 11 }
cmmPsuServiceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Tag
Blank indicates unavailable"
::= { cmmPsuFruEntry 12 }
cmmPsuIanaNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IANA Number
Blank indicates unavailable"
::= { cmmPsuFruEntry 13 }
cmmPsuFanMaxRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RPM
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 14 }
cmmPsuAirFlowDir OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Airflow Direction
Blank indicates unavailable"
::= { cmmPsuFruEntry 15 }
cmmPsuMaxOutputWatt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Output Wattage
'-100001' indicates unavailable"
::= { cmmPsuFruEntry 16 }
-- ### Fan Fru Table
cmmFanFruTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmFanFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan fru entry containing objects for a
particular fantray."
::= { cmmSysObjects 18 }
cmmFanFruEntry OBJECT-TYPE
SYNTAX CmmFanFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fan fru entry containing objects for a
particular fantray"
INDEX { cmmStackUnitIndex, cmmFanTrayNumber}
::= { cmmFanFruTable 1 }
CmmFanFruEntry ::=
SEQUENCE {
cmmFanPpid DisplayString,
cmmFanCountryofOrigin DisplayString,
cmmFanPpidPartNum DisplayString,
cmmFanPpidPartNumRev DisplayString,
cmmFanManufactureId DisplayString,
cmmFanDateCode DisplayString,
cmmFanSerialNumber DisplayString,
cmmFanPartNum DisplayString,
cmmFanPartNumRev DisplayString,
cmmFanNumOfFanPerTray INTEGER,
cmmFanType INTEGER,
cmmFanServiceTag DisplayString,
cmmFanIanaNum DisplayString,
cmmFanMaxRpm INTEGER
}
cmmFanPpid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique ppid of the fan tray
Blank indicates unavailable"
::= { cmmFanFruEntry 1 }
cmmFanCountryofOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Country of Origin
Blank indicates unavailable"
::= { cmmFanFruEntry 2 }
cmmFanPpidPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number
Blank indicates unavailable"
::= { cmmFanFruEntry 3 }
cmmFanPpidPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPID Part Number Rev
Blank indicates unavailable"
::= { cmmFanFruEntry 4 }
cmmFanManufactureId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manufacturer ID
Blank indicates unavailable"
::= { cmmFanFruEntry 5 }
cmmFanDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date Code
Blank indicates unavailable"
::= { cmmFanFruEntry 6 }
cmmFanSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number
Blank indicates unavailable"
::= { cmmFanFruEntry 7 }
cmmFanPartNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number
Blank indicates unavailable"
::= { cmmFanFruEntry 8 }
cmmFanPartNumRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number Revision
Blank indicates unavailable"
::= { cmmFanFruEntry 9 }
cmmFanNumOfFanPerTray OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Fans in the tray
'-100001' indicates unavailable"
::= { cmmFanFruEntry 10 }
cmmFanType OBJECT-TYPE
SYNTAX INTEGER {
blow-outfan(1),
blow-infan(2),
fan-type-unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan Type"
::= { cmmFanFruEntry 11 }
cmmFanServiceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Tag
Blank indicates unavailable"
::= { cmmFanFruEntry 12 }
cmmFanIanaNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IANA Number
Blank indicates unavailable"
::= { cmmFanFruEntry 13 }
cmmFanMaxRpm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RPM
'-100001' indicates unavailable"
::= { cmmFanFruEntry 14 }
-- ## Stack CPLD Table
cmmSysCpldTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmSysCpldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpld entry containing objects related to CPLD versions"
::= { cmmSysObjects 19 }
cmmSysCpldEntry OBJECT-TYPE
SYNTAX CmmSysCpldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpld entry containing objects related to CPLD versions"
INDEX { cmmStackUnitIndex,
cmmSysCpldIndex }
::= { cmmSysCpldTable 1 }
CmmSysCpldEntry ::=
SEQUENCE {
cmmSysCpldIndex INTERGER,
cmmSysCpldName DisplayString,
cmmSysCpldSupportedVer DisplayString,
cmmSysCpldCurrentVer DisplayString
}
cmmSysCpldIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Value represents CPLD Index."
::= { cmmSysCpldEntry 1 }
cmmSysCpldName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD Name.
Blank indicates unavailable"
::= { cmmSysCpldEntry 2 }
cmmSysCpldSupportedVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD supported version on board.
Blank indicates unavailable"
::= { cmmSysCpldEntry 3 }
cmmSysCpldCurrentVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPLD current version on board.
Blank indicates unavailable"
::= { cmmSysCpldEntry 4 }
--
-- ## Notifications
--
cmmAlarmVariable OBJECT IDENTIFIER ::= { cmmAlarmObjects 0 }
cmmAlarmMibNotifications OBJECT IDENTIFIER ::= { cmmAlarmObjects 1 }
cmmTransMibNotifications OBJECT IDENTIFIER ::= { cmmAlarmObjects 2 }
cmmAlarmVarInteger OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An generic INTEGER value in the TRAP object"
::= { cmmAlarmVariable 1 }
cmmAlarmVarString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An generic string value in the TRAP object"
::= { cmmAlarmVariable 2 }
--
-- SYSTEM RELATED TRAPS
--
cmmCpuLoad15MinCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad15minCriticalThreshold,
cmmStackUnitCpuLoad15Min
}
STATUS current
DESCRIPTION
"Trap to send information for 15min critical threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 1 }
cmmCpuLoad5MinCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad5minCriticalThreshold,
cmmStackUnitCpuLoad5Min
}
STATUS current
DESCRIPTION
"Trap to send information for 5min critical threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 2 }
cmmCpuLoad1MinAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minAlertThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for 1min alert level threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 3 }
cmmCpuLoad1MinCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minCriticalThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for 1min critical level threshold and
CPU Utilisation"
::= { cmmAlarmMibNotifications 4 }
cmmCpuLoad1MinAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minAlertThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from Alert Condition"
::= { cmmAlarmMibNotifications 5 }
cmmCpuLoad15MinCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad15minCriticalThreshold,
cmmStackUnitCpuLoad15Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 15 min Critical Condition"
::= { cmmAlarmMibNotifications 6 }
cmmCpuLoad5MinCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad5minCriticalThreshold,
cmmStackUnitCpuLoad5Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 5 min Critical Condition"
::= { cmmAlarmMibNotifications 7 }
cmmCpuLoad1MinCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackCpuLoad1minCriticalThreshold,
cmmStackUnitCpuLoad1Min
}
STATUS current
DESCRIPTION
"Trap to send information for CPU usage recovered from 15 min Critical Condition"
::= { cmmAlarmMibNotifications 8 }
cmmCpuCoreUtilHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilAlertThreshold,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization in alert condition."
::= { cmmAlarmMibNotifications 9 }
cmmCpuCoreUtilHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilCriticalThreshold,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization in critical condition."
::= { cmmAlarmMibNotifications 10 }
cmmCpuCoreUtilHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization after alert recovery."
::= { cmmAlarmMibNotifications 11 }
cmmCpuCoreUtilHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmStackUnitCpuUtilization
}
STATUS current
DESCRIPTION
"Trap to send information for CPU utilization after critical recovery."
::= { cmmAlarmMibNotifications 12 }
cmmRamUsageRisingAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage exceeds Alert Threshold"
::= { cmmAlarmMibNotifications 21 }
cmmRamUsageRisingCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage exceeds Critical Threshold"
::= { cmmAlarmMibNotifications 22 }
cmmRamUsageAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage recovers from Alert Condition"
::= { cmmAlarmMibNotifications 23 }
cmmRamUsageCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysRamUsedMem,
cmmSysRamCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when RAM usage recovers under Critical threshold."
::= { cmmAlarmMibNotifications 24 }
cmmHardDiskUsageRisingAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage exceeds alert threshold."
::= { cmmAlarmMibNotifications 25 }
cmmHardDiskUsageRisingCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage exceeds critical threshold."
::= { cmmAlarmMibNotifications 26 }
cmmHardDiskUsageAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskAlertThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage recovers under alert threshold."
::= { cmmAlarmMibNotifications 27 }
cmmHardDiskUsageCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysHarddiskUsedMem,
cmmSysHarddiskCriticalThreshold
}
STATUS current
DESCRIPTION
"Trap to send when Hard Disk usage recovers under critical threshold."
::= { cmmAlarmMibNotifications 28 }
cmmTemperatureLowEmergency NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempEmergencyThresholdMin,
cmmSysTempEmergencyThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature will be below lower threshold for sensor"
::= { cmmAlarmMibNotifications 31 }
cmmTemperatureHighEmergency NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempEmergencyThresholdMin,
cmmSysTempEmergencyThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature will be above threshold for sensor"
::= { cmmAlarmMibNotifications 32 }
cmmTemperatureLowAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is nearing low emergency condition for sensor"
::= { cmmAlarmMibNotifications 33 }
cmmTemperatureHighAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is nearing high emergency condition for sensor"
::= { cmmAlarmMibNotifications 34 }
cmmTemperatureLowCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature has reached low critical condition for sensor"
::= { cmmAlarmMibNotifications 35 }
cmmTemperatureHighCritical NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature has reached high critical condition for sensor"
::= { cmmAlarmMibNotifications 36 }
cmmTemperatureHighAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from alert level high for sensor"
::= { cmmAlarmMibNotifications 37 }
cmmTemperatureLowAlertRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempAlertThresholdMin,
cmmSysTempAlertThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from alert level low for sensor"
::= { cmmAlarmMibNotifications 38 }
cmmTemperatureHighCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from critical level high for sensor"
::= { cmmAlarmMibNotifications 39 }
cmmTemperatureLowCriticalRecovery NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysTemperatureSensorIndex,
cmmSysTemperatureValue,
cmmSysTempCriticalThresholdMin,
cmmSysTempCriticalThresholdMax,
cmmSysTemperatureSensorName
}
STATUS current
DESCRIPTION
"Set when Temperature is recovered to normal range from critical level low for sensor"
::= { cmmAlarmMibNotifications 40 }
cmmPsuInsertedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPowerSupplyOperStatus,
cmmPsuSerialNumber
}
STATUS current
DESCRIPTION
"Set when Power supply unit is inserted"
::= { cmmAlarmMibNotifications 41 }
cmmPsuRemovedAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex,
cmmSysPowerSupplyOperStatus,
cmmPsuSerialNumber
}
STATUS current
DESCRIPTION
"Set when Power supply unit is Removed"
::= { cmmAlarmMibNotifications 42 }
cmmPsuAcFailedAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has no input power"
::= { cmmAlarmMibNotifications 43 }
cmmPsuAcRecover NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit input is restored"
::= { cmmAlarmMibNotifications 44 }
cmmPsu12vPgFailedAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has no output power"
::= { cmmAlarmMibNotifications 45 }
cmmPsu12vPgRecover NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmSysPSUIndex
}
STATUS current
DESCRIPTION
"Set when Power supply unit has restored output"
::= { cmmAlarmMibNotifications 46 }
cmmFanTrayInsertedNotify NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanSerialNumber
}
STATUS current
DESCRIPTION
"Set when fan tray is inserted"
::= { cmmAlarmMibNotifications 51 }
cmmFanTrayRemovedAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanSerialNumber
}
STATUS current
DESCRIPTION
"Set when fan tray is Removed"
::= { cmmAlarmMibNotifications 52 }
cmmFanTrayFaultyAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray Faulty."
::= { cmmAlarmMibNotifications 53 }
cmmFanTrayRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray is recovered."
::= { cmmAlarmMibNotifications 54 }
cmmFanTrayStallAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray Stalled."
::= { cmmAlarmMibNotifications 55 }
cmmFanTrayStallRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex
}
STATUS current
DESCRIPTION
"Set when Given Fan Tray is recovered from stall."
::= { cmmAlarmMibNotifications 56 }
cmmFanRPMMinAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpmMin
}
STATUS current
DESCRIPTION
"Set when fan RPM set to its minimum value."
::= { cmmAlarmMibNotifications 57 }
cmmFanRPMMaxAlert NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmFanTrayNumber,
cmmFanIndex,
cmmFanRpmMax
}
STATUS current
DESCRIPTION
"Set when fan RPM set to its maximum value."
::= { cmmAlarmMibNotifications 58 }
cmmAlertIncompatibleTransceiverPresence NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
}
STATUS current
DESCRIPTION
"Set when Incompatible Trasceiver is Present"
::= { cmmTransMibNotifications 54}
cmmNotifyIncompatibleTransceiverRemoved NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
}
STATUS current
DESCRIPTION
"Set when Incompatible Trasceiver is Removed"
::= { cmmTransMibNotifications 55}
--
-- TRANSCEIVER(DDM) RELATED TRAPS
--
cmmTransCriticalTempHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempCriticalThresholdMin,
cmmTransTempCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 1}
cmmTransCriticalTempLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempCriticalThresholdMin,
cmmTransTempCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver is below low alarm level."
::= { cmmTransMibNotifications 2}
cmmTransAlertTempHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempAlertThresholdMin,
cmmTransTempAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver exceeds high Alert level."
::= { cmmTransMibNotifications 3}
cmmTransAlertTempLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature,
cmmTransTempAlertThresholdMin,
cmmTransTempAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal temperature of transceiver is below low Alert level"
::= { cmmTransMibNotifications 4}
cmmTransNotifyTransceiverTempRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransTemperature
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from temperature fault."
::= { cmmTransMibNotifications 5}
cmmTransCriticalVoltageHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltCriticalThresholdMin,
cmmTransVoltCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 11}
cmmTransCriticalVoltageLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltCriticalThresholdMin,
cmmTransVoltCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver is below low alarm level."
::= { cmmTransMibNotifications 12}
cmmTransAlertVoltageHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltAlertThresholdMin,
cmmTransVoltAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver exceeds high Alert level."
::= { cmmTransMibNotifications 13}
cmmTransAlertVoltageLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage,
cmmTransVoltAlertThresholdMin,
cmmTransVoltAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when internal supply voltage of transceiver is below low Alert level"
::= { cmmTransMibNotifications 14}
cmmTransNotifyTransceiverVoltRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVoltage
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from voltage fault."
::= { cmmTransMibNotifications 15}
cmmTransCriticalBiasHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrCriticalThresholdMin,
cmmTransLaserBiasCurrCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 21}
cmmTransCriticalBiasLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrCriticalThresholdMin,
cmmTransLaserBiasCurrCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver is below low alarm level."
::= { cmmTransMibNotifications 22 }
cmmTransAlertBiashigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrAlertThresholdMin,
cmmTransLaserBiasCurrAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver exceeds high Alert level."
::= { cmmTransMibNotifications 23}
cmmTransAlertBiasLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent,
cmmTransLaserBiasCurrAlertThresholdMin,
cmmTransLaserBiasCurrAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when TX Bias current of transceiver is below low Alert level."
::= { cmmTransMibNotifications 24}
cmmTransNotifyTransceiverBiasRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransLaserBiasCurrent
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Bias current fault."
::= { cmmTransMibNotifications 25}
cmmTransCriticalRxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerCriticalThresholdMin,
cmmTransRxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 31}
cmmTransCriticalRxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerCriticalThresholdMin,
cmmTransRxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver is below low alarm level."
::= { cmmTransMibNotifications 32}
cmmTransAlertRxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerAlertThresholdMin,
cmmTransRxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver exceeds high Alert level."
::= { cmmTransMibNotifications 33}
cmmTransAlertRxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower,
cmmTransRxPowerAlertThresholdMin,
cmmTransRxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Received Power of transceiver is below low Alert level."
::= { cmmTransMibNotifications 34}
cmmTransNotifyTransceiverRxPowRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransRxPower
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Rx power fault."
::= { cmmTransMibNotifications 35}
cmmTransCriticalTxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerCriticalThresholdMin,
cmmTransTxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver exceeds high alarm level."
::= { cmmTransMibNotifications 41}
cmmTransCriticalTxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerCriticalThresholdMin,
cmmTransTxPowerCriticalThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver is below low alarm level."
::= { cmmTransMibNotifications 42}
cmmTransAlertTxPowerHigh NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerAlertThresholdMin,
cmmTransTxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver exceeds high Alert level."
::= { cmmTransMibNotifications 43}
cmmTransAlertTxPowerLow NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower,
cmmTransTxPowerAlertThresholdMin,
cmmTransTxPowerAlertThresholdMax
}
STATUS current
DESCRIPTION
"Set when Transferred Power of transceiver is below low Alert level."
::= { cmmTransMibNotifications 44}
cmmTransNotifyTransceiverTxPowRecovered NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransChannelIndex,
cmmTransTxPower
}
STATUS current
DESCRIPTION
"Set when Trasceiver is recovered from Tx Power fault."
::= { cmmTransMibNotifications 45}
cmmTransNotifyTransceiverInserted NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVendorName,
cmmTransVendorSerialNumber,
cmmTransconnectortype
}
STATUS current
DESCRIPTION
"Set when Trasceiver is inserted."
::= { cmmTransMibNotifications 51}
cmmTransAlertTransceiverRemoved NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType,
cmmTransVendorName,
cmmTransVendorSerialNumber,
cmmTransconnectortype
}
STATUS current
DESCRIPTION
"Set when Trasceiver is removed."
::= { cmmTransMibNotifications 52}
cmmTransAlertFaultyTransceiverInserted NOTIFICATION-TYPE
OBJECTS {
cmmStackUnitIndex,
cmmTransIndex,
cmmTransType
}
STATUS current
DESCRIPTION
"Set when Trasceiver is inserted and failed to read transceiver EEPROM information."
::= { cmmTransMibNotifications 53}
END
Reference in New Issue Copy Permalink