715 lines
27 KiB
Plaintext
715 lines
27 KiB
Plaintext
|
|
||
|
|
ATM-TC-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-IDENTITY,
|
||
|
|
TimeTicks, mib-2
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC;
|
||
|
|
|
||
|
|
|
||
|
|
atmTCMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "9810190200Z"
|
||
|
|
ORGANIZATION "IETF AToMMIB Working Group"
|
||
|
|
CONTACT-INFO
|
||
|
|
" Michael Noto
|
||
|
|
Postal: 3Com Corporation
|
||
|
|
5400 Bayfront Plaza, M/S 3109
|
||
|
|
Santa Clara, CA 95052
|
||
|
|
USA
|
||
|
|
Tel: +1 408 326 2218
|
||
|
|
E-mail: mike_noto@3com.com
|
||
|
|
|
||
|
|
Ethan Mickey Spiegel
|
||
|
|
Postal: Cisco Systems
|
||
|
|
170 W. Tasman Dr.
|
||
|
|
San Jose, CA 95134
|
||
|
|
USA
|
||
|
|
Tel: +1 408 526 6408
|
||
|
|
E-mail: mspiegel@cisco.com
|
||
|
|
|
||
|
|
Kaj Tesink
|
||
|
|
Postal: Bellcore
|
||
|
|
331 Newman Springs Road
|
||
|
|
Red Bank, NJ 07701
|
||
|
|
USA
|
||
|
|
Tel: +1 732 758 5254
|
||
|
|
Fax: +1 732 758 4177
|
||
|
|
E-mail: kaj@bellcore.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB Module provides Textual Conventions
|
||
|
|
and OBJECT-IDENTITY Objects to be used by
|
||
|
|
ATM systems."
|
||
|
|
::= { mib-2 37 3 } -- atmMIB 3 (see [3])
|
||
|
|
|
||
|
|
-- The Textual Conventions defined below are organized
|
||
|
|
-- alphabetically
|
||
|
|
|
||
|
|
|
||
|
|
AtmAddr ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An ATM address. The semantics are implied by
|
||
|
|
the length. The address types are: - no
|
||
|
|
address (0 octets) - E.164 (8 octets) - NSAP
|
||
|
|
(20 octets) In addition, when subaddresses
|
||
|
|
are used the AtmAddr may represent the
|
||
|
|
concatenation of address and subaddress. The
|
||
|
|
associated address types are: - E.164, E.164
|
||
|
|
(16 octets) - E.164, NSAP (28 octets) - NSAP,
|
||
|
|
NSAP (40 octets) Address lengths other than
|
||
|
|
defined in this definition imply address
|
||
|
|
types defined elsewhere. Note: The E.164
|
||
|
|
address is encoded in BCD format."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..40))
|
||
|
|
|
||
|
|
|
||
|
|
AtmConnCastType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of topology of a connection (point-
|
||
|
|
to-point, point-to-multipoint). In the case
|
||
|
|
of point-to-multipoint, the orientation of
|
||
|
|
this VPL or VCL in the connection.
|
||
|
|
On a host:
|
||
|
|
- p2mpRoot indicates that the host
|
||
|
|
is the root of the p2mp connection.
|
||
|
|
- p2mpLeaf indicates that the host
|
||
|
|
is a leaf of the p2mp connection.
|
||
|
|
On a switch interface:
|
||
|
|
- p2mpRoot indicates that cells received
|
||
|
|
by the switching fabric from the interface
|
||
|
|
are from the root of the p2mp connection.
|
||
|
|
- p2mpLeaf indicates that cells transmitted
|
||
|
|
to the interface from the switching fabric
|
||
|
|
are to the leaf of the p2mp connection."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
p2p(1),
|
||
|
|
p2mpRoot(2),
|
||
|
|
p2mpLeaf(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
AtmConnKind ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of call control used for an ATM
|
||
|
|
connection at a particular interface. The use
|
||
|
|
is as follows:
|
||
|
|
pvc(1)
|
||
|
|
Virtual link of a PVC. Should not be
|
||
|
|
used for an PVC/SVC (i.e., Soft PVC)
|
||
|
|
crossconnect.
|
||
|
|
svcIncoming(2)
|
||
|
|
Virtual link established after a
|
||
|
|
received signaling request to setup
|
||
|
|
an SVC.
|
||
|
|
svcOutgoing(3)
|
||
|
|
Virtual link established after a
|
||
|
|
transmitted or forwarded signaling
|
||
|
|
request to setup an SVC.
|
||
|
|
spvcInitiator(4)
|
||
|
|
Virtual link at the PVC side of an
|
||
|
|
SVC/PVC crossconnect, where the
|
||
|
|
switch is the initiator of the Soft PVC
|
||
|
|
setup.
|
||
|
|
spvcTarget(5)
|
||
|
|
Virtual link at the PVC side of an
|
||
|
|
SVC/PVC crossconnect, where the
|
||
|
|
switch is the target of the Soft PVC
|
||
|
|
setup.
|
||
|
|
|
||
|
|
For PVCs, a pvc virtual link is always cross-
|
||
|
|
connected to a pvc virtual link.
|
||
|
|
|
||
|
|
For SVCs, an svcIncoming virtual link is always cross-
|
||
|
|
connected to an svcOutgoing virtual link.
|
||
|
|
|
||
|
|
For Soft PVCs, an spvcInitiator is either cross-connected to
|
||
|
|
an svcOutgoing or an spvcTarget, and an spvcTarget is either
|
||
|
|
cross-connected to an svcIncoming or an spvcInitiator."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
pvc(1),
|
||
|
|
svcIncoming(2),
|
||
|
|
svcOutgoing(3),
|
||
|
|
spvcInitiator(4),
|
||
|
|
spvcTarget(5)
|
||
|
|
}
|
||
|
|
|
||
|
|
AtmIlmiNetworkPrefix ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A network prefix used for ILMI address
|
||
|
|
registration. In the case of ATM endsystem
|
||
|
|
addresses (AESAs), the network prefix is the first
|
||
|
|
13 octets of the address which includes the AFI,
|
||
|
|
IDI, and HO-DSP fields. In the case of native
|
||
|
|
E.164 addresses, the network prefix is the entire
|
||
|
|
E.164 address encoded in 8 octets, as if it were
|
||
|
|
an E.164 IDP in an ATM endsystem address
|
||
|
|
structure."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum, Integrated Local Management Interface
|
||
|
|
(ILMI) Specification, Version 4.0,
|
||
|
|
af-ilmi-0065.000, September 1996, Section 9
|
||
|
|
ATM Forum, ATM User-Network Interface Signalling
|
||
|
|
Specification, Version 4.0 (UNI 4.0),
|
||
|
|
af-sig-0061.000, June 1996, Section 3"
|
||
|
|
SYNTAX OCTET STRING (SIZE(8|13))
|
||
|
|
|
||
|
|
AtmInterfaceType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The connection setup procedures used for the
|
||
|
|
identified interface.
|
||
|
|
|
||
|
|
Other: Connection setup procedures other than
|
||
|
|
those listed below.
|
||
|
|
|
||
|
|
Auto-configuration:
|
||
|
|
Indicates that the connection setup
|
||
|
|
procedures are to be determined dynamically,
|
||
|
|
or that determination has not yet been
|
||
|
|
completed. One such mechanism is via ATM
|
||
|
|
Forum ILMI auto-configuration procedures.
|
||
|
|
|
||
|
|
ITU-T DSS2:
|
||
|
|
- ITU-T Recommendation Q.2931, Broadband
|
||
|
|
Integrated Service Digital Network (B-ISDN)
|
||
|
|
Digital Subscriber Signalling System No.2
|
||
|
|
(DSS2) User-Network Interface (UNI) Layer 3
|
||
|
|
Specification for Basic Call/Connection
|
||
|
|
Control (September 1994)
|
||
|
|
- ITU-T Draft Recommendation Q.2961,
|
||
|
|
B-ISDN DSS 2 Support of Additional Traffic
|
||
|
|
Parameters (May 1995)
|
||
|
|
|
||
|
|
- ITU-T Draft Recommendation Q.2971,
|
||
|
|
B-ISDN DSS 2 User Network Interface Layer 3
|
||
|
|
Specification for Point-to-multipoint
|
||
|
|
Call/connection Control (May 1995)
|
||
|
|
|
||
|
|
ATM Forum UNI 3.0:
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification,
|
||
|
|
(1994).
|
||
|
|
|
||
|
|
ATM Forum UNI 3.1:
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
(November 1994).
|
||
|
|
|
||
|
|
ATM Forum UNI Signalling 4.0:
|
||
|
|
ATM Forum, ATM User-Network Interface (UNI)
|
||
|
|
Signalling Specification Version 4.0,
|
||
|
|
af-sig-0061.000 (June 1996).
|
||
|
|
|
||
|
|
ATM Forum IISP (based on UNI 3.0 or UNI 3.1) :
|
||
|
|
Interim Inter-switch Signaling Protocol
|
||
|
|
(IISP) Specification, Version 1.0,
|
||
|
|
af-pnni-0026.000, (December 1994).
|
||
|
|
|
||
|
|
ATM Forum PNNI 1.0 :
|
||
|
|
ATM Forum, Private Network-Network Interface
|
||
|
|
Specification, Version 1.0, af-pnni-0055.000,
|
||
|
|
(March 1996).
|
||
|
|
|
||
|
|
ATM Forum B-ICI:
|
||
|
|
ATM Forum, B-ICI Specification, Version 2.0,
|
||
|
|
af-bici-0013.002, (November 1995).
|
||
|
|
|
||
|
|
ATM Forum UNI PVC Only:
|
||
|
|
An ATM Forum compliant UNI with the
|
||
|
|
signalling disabled.
|
||
|
|
ATM Forum NNI PVC Only:
|
||
|
|
An ATM Forum compliant NNI with the
|
||
|
|
signalling disabled."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
autoConfig(2),
|
||
|
|
ituDss2(3),
|
||
|
|
atmfUni3Dot0(4),
|
||
|
|
atmfUni3Dot1(5),
|
||
|
|
atmfUni4Dot0(6),
|
||
|
|
atmfIispUni3Dot0(7),
|
||
|
|
atmfIispUni3Dot1(8),
|
||
|
|
atmfIispUni4Dot0(9),
|
||
|
|
atmfPnni1Dot0(10),
|
||
|
|
atmfBici2Dot0(11),
|
||
|
|
atmfUniPvcOnly(12),
|
||
|
|
atmfNniPvcOnly(13) }
|
||
|
|
|
||
|
|
AtmServiceCategory ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The service category for a connection."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
cbr(2), -- constant bit rate
|
||
|
|
rtVbr(3), -- real-time variable bit rate
|
||
|
|
nrtVbr(4), -- non real-time variable bit rate
|
||
|
|
abr(5), -- available bit rate
|
||
|
|
ubr(6) -- unspecified bit rate
|
||
|
|
}
|
||
|
|
|
||
|
|
AtmSigDescrParamIndex ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object identifies a row in the
|
||
|
|
atmSigDescrParamTable. The value 0 signifies that
|
||
|
|
none of the signalling parameters defined in the
|
||
|
|
atmSigDescrParamTable are applicable."
|
||
|
|
SYNTAX INTEGER (0..2147483647)
|
||
|
|
|
||
|
|
AtmTrafficDescrParamIndex ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object identifies a row in the
|
||
|
|
atmTrafficDescrParamTable. The value 0 signifies
|
||
|
|
that no row has been identified."
|
||
|
|
SYNTAX INTEGER (0..2147483647)
|
||
|
|
|
||
|
|
AtmVcIdentifier ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The VCI value for a VCL. The maximum VCI value
|
||
|
|
cannot exceed the value allowable by
|
||
|
|
atmInterfaceMaxVciBits defined in ATM-MIB."
|
||
|
|
SYNTAX INTEGER (0..65535)
|
||
|
|
|
||
|
|
AtmVpIdentifier ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The VPI value for a VPL or VCL. The value VPI=0
|
||
|
|
is only allowed for a VCL. For ATM UNIs supporting
|
||
|
|
VPCs the VPI value ranges from 0 to 255. The VPI
|
||
|
|
value 0 is supported for ATM UNIs conforming to
|
||
|
|
the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs)
|
||
|
|
specification. For ATM UNIs supporting VCCs the
|
||
|
|
VPI value ranges from 0 to 255. For ATM NNIs the
|
||
|
|
VPI value ranges from 0 to 4095. The maximum VPI
|
||
|
|
value cannot exceed the value allowable by
|
||
|
|
atmInterfaceMaxVpiBits defined in ATM-MIB."
|
||
|
|
SYNTAX INTEGER (0..4095)
|
||
|
|
|
||
|
|
AtmVorXAdminStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value determines the desired administrative
|
||
|
|
status of a virtual link or cross-connect. The up
|
||
|
|
and down states indicate that the traffic flow is
|
||
|
|
enabled or disabled respectively on the virtual
|
||
|
|
link or cross-connect."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1),
|
||
|
|
down(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
AtmVorXLastChange ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of MIB II's sysUpTime at the time a
|
||
|
|
virtual link or cross-connect entered its current
|
||
|
|
operational state. If the current state was
|
||
|
|
entered prior to the last re-initialization of the
|
||
|
|
agent then this object contains a zero value."
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
|
||
|
|
AtmVorXOperStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value determines the operational status of a
|
||
|
|
virtual link or cross-connect. The up and down
|
||
|
|
states indicate that the traffic flow is enabled
|
||
|
|
or disabled respectively on the virtual link or
|
||
|
|
cross-connect. The unknown state indicates that
|
||
|
|
the state of it cannot be determined. The state
|
||
|
|
will be down or unknown if the supporting ATM
|
||
|
|
interface(s) is down or unknown respectively."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1),
|
||
|
|
down(2),
|
||
|
|
unknown(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- OBJECT-IDENTITIES:
|
||
|
|
|
||
|
|
-- The following atmTrafficDescriptorTypes has been moved
|
||
|
|
-- from RFC1695 and no longer appear in the revision of
|
||
|
|
-- RFC1695[3].
|
||
|
|
|
||
|
|
atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {mib-2 37 1 1}
|
||
|
|
-- atmMIBObjects
|
||
|
|
-- See [3].
|
||
|
|
|
||
|
|
-- All other and new OBJECT IDENTITIES
|
||
|
|
-- are defined under the following subtree:
|
||
|
|
|
||
|
|
atmObjectIdentities OBJECT IDENTIFIER ::= {atmTCMIB 1}
|
||
|
|
|
||
|
|
-- The following values are defined for use as
|
||
|
|
-- possible values of the ATM traffic descriptor type.
|
||
|
|
|
||
|
|
atmNoTrafficDescriptor OBJECT-IDENTITY
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This identifies the no ATM traffic
|
||
|
|
descriptor type. Parameters 1, 2, 3, 4,
|
||
|
|
and 5 are not used. This traffic descriptor
|
||
|
|
type can be used for best effort traffic."
|
||
|
|
::= {atmTrafficDescriptorTypes 1}
|
||
|
|
|
||
|
|
atmNoClpNoScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for no CLP
|
||
|
|
and no Sustained Cell Rate. The use of the
|
||
|
|
parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: not used
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994."
|
||
|
|
::= {atmTrafficDescriptorTypes 2}
|
||
|
|
|
||
|
|
atmClpNoTaggingNoScr OBJECT-IDENTITY
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor is for CLP without
|
||
|
|
tagging and no Sustained Cell Rate. The use
|
||
|
|
of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: peak cell rate in cells/second
|
||
|
|
for CLP=0 traffic
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
::= {atmTrafficDescriptorTypes 3}
|
||
|
|
|
||
|
|
atmClpTaggingNoScr OBJECT-IDENTITY
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor is for CLP with
|
||
|
|
tagging and no Sustained Cell Rate. The use
|
||
|
|
of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: peak cell rate in cells/second
|
||
|
|
for CLP=0 traffic, excess
|
||
|
|
tagged as CLP=1
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
::= {atmTrafficDescriptorTypes 4}
|
||
|
|
|
||
|
|
atmNoClpScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for no CLP
|
||
|
|
with Sustained Cell Rate. The use of the
|
||
|
|
parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994."
|
||
|
|
::= {atmTrafficDescriptorTypes 5}
|
||
|
|
|
||
|
|
atmClpNoTaggingScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for CLP with
|
||
|
|
Sustained Cell Rate and no tagging. The use
|
||
|
|
of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0 traffic
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994."
|
||
|
|
::= {atmTrafficDescriptorTypes 6}
|
||
|
|
|
||
|
|
atmClpTaggingScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for CLP with
|
||
|
|
tagging and Sustained Cell Rate. The use of
|
||
|
|
the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0 traffic, excess tagged as
|
||
|
|
CLP=1
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994."
|
||
|
|
::= {atmTrafficDescriptorTypes 7}
|
||
|
|
|
||
|
|
atmClpNoTaggingMcr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for CLP with
|
||
|
|
Minimum Cell Rate and no tagging. The use of
|
||
|
|
the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: CDVT in tenths of microseconds
|
||
|
|
Parameter 3: minimum cell rate in cells/second
|
||
|
|
Parameter 4: unused
|
||
|
|
Parameter 5: unused."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994."
|
||
|
|
::= {atmTrafficDescriptorTypes 8}
|
||
|
|
|
||
|
|
atmClpTransparentNoScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for the CLP-
|
||
|
|
transparent model and no Sustained Cell Rate.
|
||
|
|
The use of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: CDVT in tenths of microseconds
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
connections following the CBR.1 conformance
|
||
|
|
definition.
|
||
|
|
|
||
|
|
Connections specifying this traffic descriptor
|
||
|
|
type will be rejected at UNI 3.0 or UNI 3.1
|
||
|
|
interfaces. For a similar traffic descriptor
|
||
|
|
type that can be accepted at UNI 3.0 and
|
||
|
|
UNI 3.1 interfaces, see atmNoClpNoScr."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 9}
|
||
|
|
|
||
|
|
atmClpTransparentScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for the CLP-
|
||
|
|
transparent model with Sustained Cell Rate.
|
||
|
|
The use of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: CDVT in tenths of microseconds
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
connections following the VBR.1 conformance
|
||
|
|
definition.
|
||
|
|
|
||
|
|
Connections specifying this traffic descriptor
|
||
|
|
type will be rejected at UNI 3.0 or UNI 3.1
|
||
|
|
interfaces. For a similar traffic descriptor
|
||
|
|
type that can be accepted at UNI 3.0 and
|
||
|
|
UNI 3.1 interfaces, see atmNoClpScr."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 10}
|
||
|
|
|
||
|
|
atmNoClpTaggingNoScr OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for no CLP
|
||
|
|
with tagging and no Sustained Cell Rate. The
|
||
|
|
use of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: CDVT in tenths of microseconds
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
connections following the UBR.2 conformance
|
||
|
|
definition ."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 11}
|
||
|
|
|
||
|
|
atmNoClpNoScrCdvt OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for no CLP
|
||
|
|
and no Sustained Cell Rate. The use of the
|
||
|
|
parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: CDVT in tenths of microseconds
|
||
|
|
Parameter 3: not used
|
||
|
|
Parameter 4: not used
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
CBR connections following the UNI 3.0/3.1
|
||
|
|
conformance definition for PCR CLP=0+1.
|
||
|
|
These CBR connections differ from CBR.1
|
||
|
|
connections in that the CLR objective
|
||
|
|
applies only to the CLP=0 cell flow.
|
||
|
|
|
||
|
|
This traffic descriptor type is also
|
||
|
|
applicable to connections following the UBR.1
|
||
|
|
conformance definition."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 12}
|
||
|
|
|
||
|
|
atmNoClpScrCdvt OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for no CLP
|
||
|
|
with Sustained Cell Rate. The use of the
|
||
|
|
parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: CDVT in tenths of microseconds
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable
|
||
|
|
to VBR connections following the UNI 3.0/3.1
|
||
|
|
conformance definition for PCR CLP=0+1 and
|
||
|
|
SCR CLP=0+1. These VBR connections
|
||
|
|
differ from VBR.1 connections in that
|
||
|
|
the CLR objective applies only to the CLP=0
|
||
|
|
cell flow."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 13}
|
||
|
|
|
||
|
|
atmClpNoTaggingScrCdvt OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for CLP with
|
||
|
|
Sustained Cell Rate and no tagging. The use
|
||
|
|
of the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0 traffic
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: CDVT in tenths of microseconds
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
connections following the VBR.2 conformance
|
||
|
|
definition."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 14}
|
||
|
|
|
||
|
|
atmClpTaggingScrCdvt OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This traffic descriptor type is for CLP with
|
||
|
|
tagging and Sustained Cell Rate. The use of
|
||
|
|
the parameter vector for this type:
|
||
|
|
Parameter 1: peak cell rate in cells/second
|
||
|
|
for CLP=0+1 traffic
|
||
|
|
Parameter 2: sustainable cell rate in cells/second
|
||
|
|
for CLP=0 traffic, excess tagged as
|
||
|
|
CLP=1
|
||
|
|
Parameter 3: maximum burst size in cells
|
||
|
|
Parameter 4: CDVT in tenths of microseconds
|
||
|
|
Parameter 5: not used.
|
||
|
|
|
||
|
|
This traffic descriptor type is applicable to
|
||
|
|
connections following the VBR.3 conformance
|
||
|
|
definition."
|
||
|
|
REFERENCE
|
||
|
|
"ATM Forum,ATM User-Network Interface,
|
||
|
|
Version 3.0 (UNI 3.0) Specification, 1994.
|
||
|
|
ATM Forum, ATM User-Network Interface,
|
||
|
|
Version 3.1 (UNI 3.1) Specification,
|
||
|
|
November 1994.
|
||
|
|
ATM Forum, Traffic Management Specification,
|
||
|
|
Version 4.0, af-tm-0056.000, June 1996."
|
||
|
|
::= {atmTrafficDescriptorTypes 15}
|
||
|
|
|
||
|
|
END
|