mibs/MIBS/junos/GMPLS-LSR-STD-MIB

-- extracted from rfc4803.txt
-- at Thu Mar  1 06:08:21 2007

GMPLS-LSR-STD-MIB DEFINITIONS ::= BEGIN

IMPORTS
  MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, zeroDotZero
    FROM SNMPv2-SMI                                   -- RFC 2578
  MODULE-COMPLIANCE, OBJECT-GROUP
    FROM SNMPv2-CONF                                  -- RFC 2580
  RowPointer
    FROM SNMPv2-TC                                    -- RFC 2579
  GmplsSegmentDirectionTC
    FROM GMPLS-TC-STD-MIB                             -- RFC 4801
  mplsInterfaceIndex, mplsInSegmentIndex, mplsOutSegmentIndex,
  mplsInterfaceGroup, mplsInSegmentGroup, mplsOutSegmentGroup,
  mplsXCGroup, mplsPerfGroup, mplsLsrNotificationGroup
    FROM MPLS-LSR-STD-MIB                             -- RFC 3813
  ifGeneralInformationGroup, ifCounterDiscontinuityGroup
    FROM IF-MIB                                       -- RFC 2863
  mplsStdMIB
    FROM MPLS-TC-STD-MIB                              -- RFC 3811
;

gmplsLsrStdMIB MODULE-IDENTITY
  LAST-UPDATED
    "200702270000Z" -- 27 February 2007 00:00:00 GMT
  ORGANIZATION
    "IETF Common Control And Measurement Plane (CCAMP) Working Group"
  CONTACT-INFO
    "       Thomas D. Nadeau
            Cisco Systems, Inc.
     Email: tnadeau@cisco.com
            Adrian Farrel
            Old Dog Consulting

     Email: adrian@olddog.co.uk
     Comments about this document should be emailed directly to the
     CCAMP working group mailing list at ccamp@ops.ietf.org."

  DESCRIPTION
    "Copyright (C) The IETF Trust (2007).  This version of
     this MIB module is part of RFC 4803; see the RFC itself for
     full legal notices.

     This MIB module contains managed object definitions for the
     Generalized Multiprotocol (GMPLS) Label Switching Router as
     defined in Generalized Multi-Protocol Label Switching (GMPLS)
     Architecture, Mannie et al., RFC 3945, October 2004."
  REVISION
    "200702270000Z" -- 27 February 2007 00:00:00 GMT
  DESCRIPTION
    "Initial version issued as part of RFC 4803."
  ::= { mplsStdMIB 15 }

-- no notifications are currently defined.
gmplsLsrObjects       OBJECT IDENTIFIER ::= { gmplsLsrStdMIB 1 }
gmplsLsrConformance   OBJECT IDENTIFIER ::= { gmplsLsrStdMIB 2 }

gmplsInterfaceTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF GmplsInterfaceEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "This table specifies per-interface GMPLS capability and
     associated information.  It extends the information in the
     mplsInterfaceTable of MPLS-LSR-STD-MIB through a
     sparse augmentation relationship."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  ::= { gmplsLsrObjects 1 }

gmplsInterfaceEntry OBJECT-TYPE
  SYNTAX        GmplsInterfaceEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "A conceptual row in this table is created automatically by an
     LSR for each interface that is both capable of supporting
     GMPLS and configured to support GMPLS.  Note that
     support of GMPLS is not limited to control plane signaling,
     but may include data-plane-only function configured through
     SNMP SET commands performed on this MIB module.
     A conceptual row in this table may also be created via SNMP
     SET commands or automatically by the LSR to supplement a
     conceptual row in the mplsInterfaceTable where the interface
     is not capable of GMPLS but where the other objects carried
     in this row provide useful additional information for an
     MPLS interface.

     A conceptual row in this table will exist if and only if a
     corresponding entry in the mplsInterfaceTable exists, and a
     corresponding entry in the ifTable exists with ifType = mpls(166).
     If the associated entry in the ifTable is operationally disabled
     (thus removing the GMPLS capabilities on the interface) or the
     entry in the mplsInterfaceTable is deleted, the corresponding entry
     in this table MUST be deleted shortly thereafter.

     The indexes are the same as for the mplsInterfaceTable.  Thus, the
     entry with index 0 represents the per-platform label space and
     contains parameters that apply to all interfaces that
     participate in the per-platform label space."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  INDEX { mplsInterfaceIndex }
::= { gmplsInterfaceTable 1 }

GmplsInterfaceEntry ::= SEQUENCE {
  gmplsInterfaceSignalingCaps      BITS,
  gmplsInterfaceRsvpHelloPeriod    Unsigned32
}

gmplsInterfaceSignalingCaps OBJECT-TYPE
  SYNTAX  BITS {
    unknown(0),
    rsvpGmpls(1),
    crldpGmpls(2), -- note the use of CR-LDP is deprecated
    otherGmpls(3)
  }
   MAX-ACCESS   read-create
  STATUS       current
  DESCRIPTION
    "Defines the signaling capabilities on this interface.  Multiple
     bits may legitimately be set at once, but if 'unknown' is set
     then no other bit may be set.  Setting no bits implies that GMPLS
     signaling cannot be performed on this interface and all LSPs
     must be manually provisioned or that this table entry is only
     present to supplement an entry in the mplsInterfaceTable by
     providing the information carried in other objects in this row."
  REFERENCE
    "1. Generalized MPLS Signaling - CR-LDP Extensions, RFC 3472.
     2. The Multiprotocol Label Switching (MPLS) Working Group
        decision on MPLS signaling protocols, RFC 3468.
     3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473."
  DEFVAL { { rsvpGmpls } }
::= { gmplsInterfaceEntry 1 }

gmplsInterfaceRsvpHelloPeriod OBJECT-TYPE
  SYNTAX       Unsigned32
  UNITS        "milliseconds"
   MAX-ACCESS   read-create
  STATUS       current
  DESCRIPTION
    "Period, in milliseconds, between sending Resource Reservation
     Protocol (RSVP) Hello messages on this interface.  A value of 0
     indicates that no Hello messages should be sent on this
     interface.

     This object is only valid if gmplsInterfaceSignalingCaps has no
     bits set or includes the rsvpGmpls bit."
  REFERENCE
    "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
        section 5.
     2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
        section 9.3."
  DEFVAL { 3000 }
::= { gmplsInterfaceEntry 2 }

gmplsInSegmentTable  OBJECT-TYPE
  SYNTAX        SEQUENCE OF GmplsInSegmentEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "This table sparse augments the mplsInSegmentTable of
     MPLS-LSR-STD-MIB to provide GMPLS-specific information about
     incoming segments to an LSR."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
::= { gmplsLsrObjects 2 }

gmplsInSegmentEntry  OBJECT-TYPE
  SYNTAX        GmplsInSegmentEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "An entry in this table extends the representation of an incoming
     segment represented by an entry in the mplsInSegmentTable in
     MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
     created by a network administrator via SNMP SET commands, or in
     response to signaling protocol events.

     Note that the storage type for this entry is given by the value
     of mplsInSegmentStorageType in the corresponding entry of the
     mplsInSegmentTable."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  INDEX { mplsInSegmentIndex }
::= { gmplsInSegmentTable 1 }

GmplsInSegmentEntry ::= SEQUENCE {
  gmplsInSegmentDirection        GmplsSegmentDirectionTC,
  gmplsInSegmentExtraParamsPtr   RowPointer
}

gmplsInSegmentDirection OBJECT-TYPE
  SYNTAX        GmplsSegmentDirectionTC
   MAX-ACCESS    read-create
  STATUS        current
  DESCRIPTION
    "This object indicates the direction of data flow on this
     segment.  This object cannot be modified if
     mplsInSegmentRowStatus for the corresponding entry in the
     mplsInSegmentTable is active(1)."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  DEFVAL        { forward }
::= { gmplsInSegmentEntry 1 }

gmplsInSegmentExtraParamsPtr  OBJECT-TYPE
  SYNTAX       RowPointer
   MAX-ACCESS   read-create
  STATUS       current
  DESCRIPTION
    "Some tunnels will run over transports that can usefully support
     technology-specific additional parameters (for example,
     Synchronous Optical Network (SONET) resource usage).  Such can be
     supplied from an external table and referenced from here.  A value
     of zeroDotZero in this attribute indicates that there is no such
     additional information."
  DEFVAL      { zeroDotZero }
  ::= { gmplsInSegmentEntry 2 }

gmplsOutSegmentTable  OBJECT-TYPE
  SYNTAX        SEQUENCE OF GmplsOutSegmentEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "This table sparse augments the mplsOutSegmentTable of
     MPLS-LSR-STD-MIB to provide GMPLS-specific information about
     outgoing segments from an LSR."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
::= { gmplsLsrObjects 3 }

gmplsOutSegmentEntry  OBJECT-TYPE
  SYNTAX        GmplsOutSegmentEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION
    "An entry in this table extends the representation of an outgoing
     segment represented by an entry in the mplsOutSegmentTable of
     MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
     created by a network administrator via SNMP SET commands, or in
     response to signaling protocol events.

     Note that the storage type for this entry is given by the value
     of mplsOutSegmentStorageType in the corresponding entry of the
     mplsOutSegmentTable."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  INDEX  { mplsOutSegmentIndex }
::= { gmplsOutSegmentTable 1 }

GmplsOutSegmentEntry ::= SEQUENCE {
  gmplsOutSegmentDirection       GmplsSegmentDirectionTC,
  gmplsOutSegmentTTLDecrement    Unsigned32,
  gmplsOutSegmentExtraParamsPtr  RowPointer
}

gmplsOutSegmentDirection OBJECT-TYPE
  SYNTAX        GmplsSegmentDirectionTC
   MAX-ACCESS    read-create
  STATUS        current
  DESCRIPTION
    "This object indicates the direction of data flow on this
     segment.  This object cannot be modified if
     mplsOutSegmentRowStatus for the corresponding entry in the
     mplsOutSegmentTable is active(1)."
  REFERENCE
    "1. Multiprotocol Label Switching (MPLS) Label Switching
        Router (LSR) Management Information Base (MIB), RFC 3813."
  DEFVAL  { forward }
::= { gmplsOutSegmentEntry 1 }

gmplsOutSegmentTTLDecrement OBJECT-TYPE
  SYNTAX        Unsigned32
   MAX-ACCESS    read-create
  STATUS        current
  DESCRIPTION
    "This object indicates the amount by which to decrement the Time
     to Live (TTL) of any payload packets forwarded on this segment if
     per-hop decrementing is being done.

     A value of zero indicates that no decrement should be made or
     that per-hop decrementing is not in use.

     See the gmplsTunnelTTLDecrement object in the gmplsTunnelTable
     of GMPLS-TE-STD-MIB for a value by which to decrement the TTL
     for the whole of a tunnel.

     This object cannot be modified if mplsOutSegmentRowStatus for
     the associated entry in the mplsOutSegmentTable is active(1)."
  REFERENCE
    "1. Time To Live (TTL) Processing in Multi-Protocol Label
        Switching (MPLS) Networks, RFC 3443.
     2. Generalized Multiprotocol Label Switching (GMPLS) Traffic
        Engineering Management Information Base, RFC 4802."
  DEFVAL  { 0 }
::= { gmplsOutSegmentEntry 2 }

gmplsOutSegmentExtraParamsPtr  OBJECT-TYPE
  SYNTAX       RowPointer
   MAX-ACCESS   read-create
  STATUS       current
  DESCRIPTION
    "Some tunnels will run over transports that can usefully support
     technology-specific additional parameters (for example, SONET
     resource usage).  Such can be supplied from an external table and
     referenced from here.

     A value of zeroDotZero in this attribute indicates that there is
     no such additional information."
  DEFVAL      { zeroDotZero }
  ::= { gmplsOutSegmentEntry 3 }

gmplsLsrGroups
  OBJECT IDENTIFIER ::= { gmplsLsrConformance 1 }

gmplsLsrCompliances
  OBJECT IDENTIFIER ::= { gmplsLsrConformance 2 }

-- Compliance requirement for fully compliant implementations.

gmplsLsrModuleFullCompliance MODULE-COMPLIANCE
  STATUS current
  DESCRIPTION
    "Compliance statement for agents that provide full support for
     GMPLS-LSR-STD-MIB.

     The mandatory group has to be implemented by all LSRs that
     originate, terminate, or act as transit for TE-LSPs/tunnels.
     In addition, depending on the type of tunnels supported, other
     groups become mandatory as explained below."

  MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.

  MANDATORY-GROUPS {
    ifGeneralInformationGroup,
    ifCounterDiscontinuityGroup
  }

  MODULE MPLS-LSR-STD-MIB -- The MPLS-LSR-STD-MIB, RFC3813

  MANDATORY-GROUPS {
    mplsInterfaceGroup,
    mplsInSegmentGroup,
    mplsOutSegmentGroup,
    mplsXCGroup,
    mplsPerfGroup,
    mplsLsrNotificationGroup
  }

  MODULE -- this module

  MANDATORY-GROUPS    {
    gmplsInterfaceGroup,
    gmplsInSegmentGroup,
    gmplsOutSegmentGroup
  }

  OBJECT      gmplsInSegmentDirection
  SYNTAX      GmplsSegmentDirectionTC
  MIN-ACCESS  read-only
  DESCRIPTION
    "The only valid value for unidirectional LSPs is forward(1)."

  OBJECT      gmplsOutSegmentDirection
  SYNTAX      GmplsSegmentDirectionTC
  MIN-ACCESS  read-only
  DESCRIPTION
    "The only valid value for unidirectional LSPs is forward(1)."

  OBJECT      gmplsOutSegmentTTLDecrement
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

  OBJECT      gmplsInSegmentExtraParamsPtr
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."
  OBJECT      gmplsOutSegmentExtraParamsPtr
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

::= { gmplsLsrCompliances 1 }

-- Compliance requirement for implementations that provide read-only
-- access.

gmplsLsrModuleReadOnlyCompliance MODULE-COMPLIANCE
  STATUS current
  DESCRIPTION
    "Compliance requirement for implementations that only provide
     read-only support for GMPLS-LSR-STD-MIB.  Such devices can then
     be monitored but cannot be configured using this MIB module."

  MODULE IF-MIB -- The interfaces Group MIB, RFC 2863

  MANDATORY-GROUPS {
    ifGeneralInformationGroup,
    ifCounterDiscontinuityGroup
  }

  MODULE MPLS-LSR-STD-MIB

  MANDATORY-GROUPS {
    mplsInterfaceGroup,
    mplsInSegmentGroup,
    mplsOutSegmentGroup,
    mplsXCGroup,
    mplsPerfGroup
  }
  MODULE -- this module

  MANDATORY-GROUPS {
    gmplsInterfaceGroup,
    gmplsInSegmentGroup,
    gmplsOutSegmentGroup
  }

  OBJECT      gmplsInterfaceSignalingCaps
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

  OBJECT      gmplsInterfaceRsvpHelloPeriod
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

  OBJECT      gmplsInSegmentDirection
  SYNTAX      GmplsSegmentDirectionTC
  MIN-ACCESS  read-only
  DESCRIPTION
    "The only valid value for unidirectional LSPs is forward(1)."

  OBJECT      gmplsInSegmentExtraParamsPtr
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

  OBJECT      gmplsOutSegmentDirection
  MIN-ACCESS  read-only
  DESCRIPTION
    "The only valid value for unidirectional LSPs is forward(1)."

  OBJECT      gmplsOutSegmentTTLDecrement
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."
  OBJECT      gmplsOutSegmentExtraParamsPtr
  MIN-ACCESS  read-only
  DESCRIPTION
    "Write access is not required."

::= { gmplsLsrCompliances 2 }

gmplsInterfaceGroup OBJECT-GROUP
  OBJECTS {
    gmplsInterfaceSignalingCaps,
    gmplsInterfaceRsvpHelloPeriod
  }
  STATUS  current
  DESCRIPTION
   "Collection of objects that provide additional
    information for an MPLS interface and are needed
    for GMPLS interface configuration and performance
    information."
::= { gmplsLsrGroups 1 }

gmplsInSegmentGroup  OBJECT-GROUP
  OBJECTS {
    gmplsInSegmentDirection,
    gmplsInSegmentExtraParamsPtr
  }
  STATUS  current
  DESCRIPTION
    "Collection of objects that provide additional
     information for an MPLS in-segment and are needed
     for GMPLS in-segment configuration and performance
     information."
::= { gmplsLsrGroups 2 }

gmplsOutSegmentGroup  OBJECT-GROUP
  OBJECTS {
    gmplsOutSegmentDirection,
    gmplsOutSegmentTTLDecrement,
    gmplsOutSegmentExtraParamsPtr
  }
  STATUS  current
  DESCRIPTION
    "Collection of objects that provide additional
     information for an MPLS out-segment and are needed
     for GMPLS out-segment configuration and performance
     information."
::= { gmplsLsrGroups 3 }
END

-- 
--    Copyright (C) The IETF Trust (2007).
-- 
--    This document is subject to the rights, licenses and restrictions
--    contained in BCP 78, and except as set forth therein, the authors
--    retain all their rights.
-- 
--    This document and the information contained herein are provided on an
--    "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
--    OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
--    THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
--    OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
--    THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
--    WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- 
-- Intellectual Property
-- 
--    The IETF takes no position regarding the validity or scope of any
--    Intellectual Property Rights or other rights that might be claimed to
--    pertain to the implementation or use of the technology described in
--    this document or the extent to which any license under such rights
--    might or might not be available; nor does it represent that it has
--    made any independent effort to identify any such rights.  Information
--    on the procedures with respect to rights in RFC documents can be
--    found in BCP 78 and BCP 79.
-- 
--    Copies of IPR disclosures made to the IETF Secretariat and any
--    assurances of licenses to be made available, or the result of an
--    attempt made to obtain a general license or permission for the use of
--    such proprietary rights by implementers or users of this
--    specification can be obtained from the IETF on-line IPR repository at
--    http://www.ietf.org/ipr.
-- 
--    The IETF invites any interested party to bring to its attention any
--    copyrights, patents or patent applications, or other proprietary
--    rights that may cover technology that may be required to implement
--    this standard.  Please address the information to the IETF at
--    ietf-ipr@ietf.org.
--