mibs/MIBS/junos/JNX-L2TP-MIB

1797 lines
69 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
JNX-L2TP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32, Unsigned32, Counter32, Gauge32,
Counter64, TimeTicks, transmission, MODULE-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, RowStatus, StorageType, TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
CounterBasedGauge64 -- RFC 2856
FROM HCNUM-TC
InetAddress, InetAddressType, InetPortNumber
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
jnxL2tpMibRoot
FROM JUNIPER-SMI;
jnxL2tp MODULE-IDENTITY
LAST-UPDATED "201405020000Z" -- 02 May 2014
ORGANIZATION "Juniper Networks Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"Provides monitoring information regarding
the Layer Two Transport Protocol. This MIB
is based on the standard MIB defined in
RFC 3371. However, there are significant differences
including the INDEX fields of l2tpTunnelStatsTable
and l2tpSessionStatsTable."
-- revision log
REVISION "200701110000Z" -- 11 January 2007
DESCRIPTION
"Initial revision."
REVISION "201206080000Z" -- 08-Jun-12 03:12 PM EST - JUNOS 12.1
DESCRIPTION
"Changes are done to change all Data packet/octet counters from
32 to 64 bit counter. 32 bit counters were too small for data
packets/octects and were consumed too early. All old counters are
deprecated and new counters are added."
REVISION "201309190000Z" -- 19-Sept-13 03:12 PM EST - JUNOS 13.1
DESCRIPTION
"Updated the revision history and LAST-UPDATED field."
REVISION "201311210000Z" -- 21-Nov-13 03:12 PM EST - JUNOS 13.1
DESCRIPTION
"Corrected order of revision history"
REVISION "201405020000Z" -- 02-May-14 02:14 AM EST - JUNOS 14.1
DESCRIPTION
"Changed the data type of jnxL2tpSessionStatsInterfaceUnit from
Integer32 to Unsigned32."
::= { jnxL2tpMibRoot 1 }
--
-- Definitions of significant branches
--
jnxL2tpObjects OBJECT IDENTIFIER ::= { jnxL2tp 1 }
jnxL2tpScalar OBJECT IDENTIFIER ::= { jnxL2tpObjects 1 }
jnxL2tpStats OBJECT IDENTIFIER ::= { jnxL2tpScalar 1 }
--
-- The L2TP Scalar Status and Statistics Group
--
jnxL2tpStatsTotalTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of tunnels
that are currently in the established state. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 1 }
jnxL2tpStatsTotalSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of sessions
that are currently in the established state. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 2 }
jnxL2tpStatsControlRxOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets received by the existing tunnels. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 3 }
jnxL2tpStatsControlRxPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received by the existing tunnels. This is an
instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 4 }
jnxL2tpStatsControlTxOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets that were transmitted to the existing tunnel
endpoints. This is an instantaneously accumulated
value which can increase or decrease depending on
number of tunnels established at the time of querying."
::= { jnxL2tpStats 5 }
jnxL2tpStatsControlTxPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
that were transmitted to the existing tunnel endpoints.This
is an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 6 }
jnxL2tpStatsPayloadRxOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the number of payload channel
octets that were received on the exisiting tunnels. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying. This is deprecated and replaced
by jnxL2tpStatsPayloadRxOctets64"
::= { jnxL2tpStats 7 }
jnxL2tpStatsPayloadRxPkts OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were received on the existing tunnels. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 8 }
jnxL2tpStatsPayloadTxOctets OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were transmitted to the existing tunnel peers.
This is an instantaneously accumulated value which can
increase or decrease depending on number of tunnels
established at the time of querying."
::= { jnxL2tpStats 9 }
jnxL2tpStatsPayloadTxPkts OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were transmitted to existing tunnel peers. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 10 }
jnxL2tpStatsErrorTxPkts OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of errored packet
transmission attempts to the existing tunnel peers. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 11 }
jnxL2tpStatsErrorRxPkts OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of errored packets
that were received from the existing tunnel peers. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 12 }
jnxL2tpStatsPayloadRxOctets64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were received on the exisiting tunnels. This is
an instantaneously accumulated value which can increase
or decrease depending on number of tunnels established
at the time of querying."
::= { jnxL2tpStats 13 }
--
-- The L2TP Tunnel Group Status and Statistics Table
--
jnxL2tpTunnelGroupStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2tpTunnelGroupStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP tunnel group status and statistics table. This
table contains objects that can be used to describe
the current status and statistics of a single L2TP
tunnel group."
::= { jnxL2tpObjects 2 }
jnxL2tpTunnelGroupStatsEntry OBJECT-TYPE
SYNTAX JnxL2tpTunnelGroupStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2TP tunnel group stats entry."
INDEX { IMPLIED jnxL2tpTunnelGroupStatsTnlGrpName }
::= { jnxL2tpTunnelGroupStatsTable 1 }
JnxL2tpTunnelGroupStatsEntry ::=
SEQUENCE {
jnxL2tpTunnelGroupStatsTnlGrpName
OCTET STRING,
jnxL2tpTunnelGroupStatsGatewayAddrType
InetAddressType,
jnxL2tpTunnelGroupStatsGatewayAddr
InetAddress,
jnxL2tpTunnelGroupStatsSvcIntfName
SnmpAdminString,
jnxL2tpTunnelGroupStatsTotalTunnels
Gauge32,
jnxL2tpTunnelGroupStatsTotalSessions
Gauge32
}
jnxL2tpTunnelGroupStatsTnlGrpName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the name of this tunnel
group."
::= { jnxL2tpTunnelGroupStatsEntry 1 }
jnxL2tpTunnelGroupStatsGatewayAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of local IP address
for L2TP tunnels that are part of this group."
::= { jnxL2tpTunnelGroupStatsEntry 2 }
jnxL2tpTunnelGroupStatsGatewayAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local IP address
for L2TP tunnels that are part of this group."
::= { jnxL2tpTunnelGroupStatsEntry 3 }
jnxL2tpTunnelGroupStatsSvcIntfName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the service
interface that is hosting this tunnel group."
::= { jnxL2tpTunnelGroupStatsEntry 4 }
jnxL2tpTunnelGroupStatsTotalTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of tunnels
that are currently in the established state in this
tunnel group."
::= { jnxL2tpTunnelGroupStatsEntry 5 }
jnxL2tpTunnelGroupStatsTotalSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of sessions
that are currently in the established state in
this tunnel group."
::= { jnxL2tpTunnelGroupStatsEntry 6 }
--
-- The L2TP Tunnel Status and Statistics Table
--
jnxL2tpTunnelStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2tpTunnelStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP tunnel status and statistics table. This
table contains objects that can be used to describe
the current status and statistics of a single L2TP
tunnel."
::= { jnxL2tpObjects 3 }
jnxL2tpTunnelStatsEntry OBJECT-TYPE
SYNTAX JnxL2tpTunnelStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2TP tunnel interface stats entry."
INDEX { jnxL2tpTunnelStatsLocalTID }
::= { jnxL2tpTunnelStatsTable 1 }
JnxL2tpTunnelStatsEntry ::=
SEQUENCE {
jnxL2tpTunnelStatsLocalTID
Integer32,
jnxL2tpTunnelStatsServiceInterface
SnmpAdminString,
jnxL2tpTunnelStatsTunnelGroup
SnmpAdminString,
jnxL2tpTunnelStatsRemoteTID
Integer32,
jnxL2tpTunnelStatsRemoteIpAddrType
InetAddressType,
jnxL2tpTunnelStatsRemoteIpAddress
InetAddress,
jnxL2tpTunnelStatsRemoteUdpPort
InetPortNumber,
jnxL2tpTunnelStatsActiveSessions
Gauge32,
jnxL2tpTunnelStatsState
INTEGER,
jnxL2tpTunnelStatsLocalIpAddrType
InetAddressType,
jnxL2tpTunnelStatsLocalIpAddress
InetAddress,
jnxL2tpTunnelStatsLocalUdpPort
InetPortNumber,
jnxL2tpTunnelStatsLocalHostName
SnmpAdminString,
jnxL2tpTunnelStatsRemoteHostName
SnmpAdminString,
jnxL2tpTunnelMaxSessions
Integer32,
jnxL2tpTunnelStatsWindowSize
Integer32,
jnxL2tpTunnelStatsHelloInterval
Integer32,
jnxL2tpTunnelStatsCreationTime
DateAndTime,
jnxL2tpTunnelStatsUpTime
TimeTicks,
jnxL2tpTunnelStatsIdleTime
TimeTicks,
jnxL2tpTunnelStatsCollectionStart
DateAndTime,
jnxL2tpTunnelStatsControlTxPkts
Counter32,
jnxL2tpTunnelStatsControlTxBytes
Counter64,
jnxL2tpTunnelStatsControlRxPkts
Counter32,
jnxL2tpTunnelStatsControlRxBytes
Counter64,
jnxL2tpTunnelStatsDataTxPkts
Counter32,
jnxL2tpTunnelStatsDataTxBytes
Counter64,
jnxL2tpTunnelStatsDataRxPkts
Counter32,
jnxL2tpTunnelStatsDataRxBytes
Counter64,
jnxL2tpTunnelStatsErrorTxPkts
Counter32,
jnxL2tpTunnelStatsErrorRxPkts
Counter32,
jnxL2tpTunnelStatsControlTxBytes32
Counter32,
jnxL2tpTunnelStatsControlRxBytes32
Counter32,
jnxL2tpTunnelStatsDataTxPkts64
Counter64,
jnxL2tpTunnelStatsDataRxPkts64
Counter64
}
jnxL2tpTunnelStatsLocalTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the local tunnel Identifier."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpTunnelStatsEntry 1 }
jnxL2tpTunnelStatsServiceInterface OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the service
interface on which this tunnel is being hosted."
::= { jnxL2tpTunnelStatsEntry 2 }
jnxL2tpTunnelStatsTunnelGroup OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the tunnel
group that this tunnel is part of."
::= { jnxL2tpTunnelStatsEntry 3 }
jnxL2tpTunnelStatsRemoteTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote tunnel Identifier."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpTunnelStatsEntry 4 }
jnxL2tpTunnelStatsRemoteIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of the remote end
address of this tunnel."
::= { jnxL2tpTunnelStatsEntry 5 }
jnxL2tpTunnelStatsRemoteIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote end address
of this tunnel."
::= { jnxL2tpTunnelStatsEntry 6 }
jnxL2tpTunnelStatsRemoteUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote end UDP
port of this tunnel."
::= { jnxL2tpTunnelStatsEntry 7 }
jnxL2tpTunnelStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
in the established state for this tunnel."
::= { jnxL2tpTunnelStatsEntry 8 }
jnxL2tpTunnelStatsState OBJECT-TYPE
SYNTAX INTEGER {
cc-responder-accept-new(1),
cc-responder-reject-new(2),
cc-responder-idle(3),
cc-responder-wait-ctl-conn(4),
cleanup(5),
closed(6),
destroyed(7),
established(8),
terminate(9),
unknown(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the current state of the
control tunnel - one of the internal tunnel
state names as described below:
cc_responder_accept_new
The tunnel has received and accepted the start
control connection request (SCCRQ)
cc_responder_reject_new
The tunnel has received and rejected the SCCRQ
cc_responder_idle
The tunnel has just been created
cc_responder_wait_ctl_conn
The tunnel has sent the start control connection
response (SCCRP) and is waiting for the start
control connection connected (SCCCN) message
cleanup
The tunnel is being cleaned up
closed
The tunnel is being closed
destroyed
The tunnel is being destroyed
established
The tunnel is operating
terminate
The tunnel is terminating
Unknown
The tunnel is not connected to the router."
::= { jnxL2tpTunnelStatsEntry 9 }
jnxL2tpTunnelStatsLocalIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of the local
end address of this tunnel."
::= { jnxL2tpTunnelStatsEntry 10 }
jnxL2tpTunnelStatsLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local end address
of this tunnel."
::= { jnxL2tpTunnelStatsEntry 11 }
jnxL2tpTunnelStatsLocalUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local end UDP port
of this tunnel."
::= { jnxL2tpTunnelStatsEntry 12 }
jnxL2tpTunnelStatsLocalHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local host name
of this tunnel."
::= { jnxL2tpTunnelStatsEntry 13 }
jnxL2tpTunnelStatsRemoteHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the host name as discovered
during the tunnel establishment phase (via the Host
Name AVP) of the L2TP peer. If the tunnel is idle
this object should maintain its value from the last
time it was connected."
::= { jnxL2tpTunnelStatsEntry 14 }
jnxL2tpTunnelMaxSessions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of sessions
configured on this tunnel. It could be any positive
number or unlimited (0)."
::= { jnxL2tpTunnelStatsEntry 15 }
jnxL2tpTunnelStatsWindowSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the send window size for this
tunnel."
::= { jnxL2tpTunnelStatsEntry 16 }
jnxL2tpTunnelStatsHelloInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the hello interval for this
tunnel."
::= { jnxL2tpTunnelStatsEntry 17 }
jnxL2tpTunnelStatsCreationTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time of creation of
this tunnel."
::= { jnxL2tpTunnelStatsEntry 18 }
jnxL2tpTunnelStatsUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time elapsed
since this tunnel was established."
::= { jnxL2tpTunnelStatsEntry 19 }
jnxL2tpTunnelStatsIdleTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time elapsed
since this tunnel had last data activity
(transmission or reception)."
::= { jnxL2tpTunnelStatsEntry 20 }
jnxL2tpTunnelStatsCollectionStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time at which the
statistics gathering started for this tunnel."
::= { jnxL2tpTunnelStatsEntry 21 }
jnxL2tpTunnelStatsControlTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
packets that were transmitted to the tunnel
peer."
::= { jnxL2tpTunnelStatsEntry 22 }
jnxL2tpTunnelStatsControlTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of control
bytes that were transmitted to the tunnel
peer. This is deprecated and replaced by
jnxL2tpTunnelStatsControlTxBytes32"
::= { jnxL2tpTunnelStatsEntry 23 }
jnxL2tpTunnelStatsControlRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control packets
received on the tunnel."
::= { jnxL2tpTunnelStatsEntry 24 }
jnxL2tpTunnelStatsControlRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of control
bytes that were received from the tunnel
peer. This has been deprecated and replaced
by jnxL2tpTunnelStatsControlRxBytes32"
::= { jnxL2tpTunnelStatsEntry 25 }
jnxL2tpTunnelStatsDataTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of data packets
transmitted to the tunnel. This has been deprecated
and replaced by jnxL2tpTunnelStatsDataTxPkts64"
::= { jnxL2tpTunnelStatsEntry 26 }
jnxL2tpTunnelStatsDataTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data
bytes that were transmitted to the tunnel
peer."
::= { jnxL2tpTunnelStatsEntry 27 }
jnxL2tpTunnelStatsDataRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of data packets
received from this tunnel. This is deprecated and
replaced by jnxL2tpTunnelStatsDataRxPkts64"
::= { jnxL2tpTunnelStatsEntry 28 }
jnxL2tpTunnelStatsDataRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data
bytes that were received from the tunnel
peer."
::= { jnxL2tpTunnelStatsEntry 29 }
jnxL2tpTunnelStatsErrorTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of error
transmit packets on the tunnel."
::= { jnxL2tpTunnelStatsEntry 30 }
jnxL2tpTunnelStatsErrorRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of error
receive packets on the tunnel."
::= { jnxL2tpTunnelStatsEntry 31 }
jnxL2tpTunnelStatsControlTxBytes32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
bytes that were transmitted to the tunnel
peer."
::= { jnxL2tpTunnelStatsEntry 32 }
jnxL2tpTunnelStatsControlRxBytes32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
bytes that were received from the tunnel
peer."
::= { jnxL2tpTunnelStatsEntry 33 }
jnxL2tpTunnelStatsDataTxPkts64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data packets
transmitted to the tunnel."
::= { jnxL2tpTunnelStatsEntry 34 }
jnxL2tpTunnelStatsDataRxPkts64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data packets
received from this tunnel."
::= { jnxL2tpTunnelStatsEntry 35 }
--
-- The L2TP Session Status and Statistics Table
--
jnxL2tpSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2tpSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP session status and statistics table. This
table contains the objects that can be used to
describe the current status and statistics of a
single L2TP tunneled session."
::= { jnxL2tpObjects 4 }
jnxL2tpSessionStatsEntry OBJECT-TYPE
SYNTAX JnxL2tpSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2TP session interface stats entry."
INDEX { jnxL2tpSessionStatsLocalTID,
jnxL2tpSessionStatsLocalSID }
::= { jnxL2tpSessionStatsTable 1 }
JnxL2tpSessionStatsEntry ::=
SEQUENCE {
jnxL2tpSessionStatsLocalTID
Integer32,
jnxL2tpSessionStatsLocalSID
Integer32,
jnxL2tpSessionStatsServiceInterface
SnmpAdminString,
jnxL2tpSessionStatsTunnelGroup
SnmpAdminString,
jnxL2tpSessionStatsRemoteSID
Integer32,
jnxL2tpSessionStatsInterfaceUnit
Unsigned32,
jnxL2tpSessionStatsEncapType
INTEGER,
jnxL2tpSessionStatsBundleID
Integer32,
jnxL2tpSessionStatsState
INTEGER,
jnxL2tpSessionStatsUserName
SnmpAdminString,
jnxL2tpSessionStatsMode
INTEGER,
jnxL2tpSessionStatsLocalAddrType
InetAddressType,
jnxL2tpSessionStatsLocalAddress
InetAddress,
jnxL2tpSessionStatsLocalUdpPort
InetPortNumber,
jnxL2tpSessionStatsRemoteAddrType
InetAddressType,
jnxL2tpSessionStatsRemoteAddress
InetAddress,
jnxL2tpSessionStatsRemoteUdpPort
InetPortNumber,
jnxL2tpSessionStatsLocalHostName
SnmpAdminString,
jnxL2tpSessionStatsRemoteHostName
SnmpAdminString,
jnxL2tpSessionAssignedIpAddrType
InetAddressType,
jnxL2tpSessionAssignedIpAddress
InetAddress,
jnxL2tpSessionLocalMRU
INTEGER,
jnxL2tpSessionRemoteMRU
INTEGER,
jnxL2tpSessionStatsTxSpeed
Unsigned32,
jnxL2tpSessionStatsRxSpeed
Unsigned32,
jnxL2tpSessionStatsCallBearerType
INTEGER,
jnxL2tpSessionStatsFramingType
INTEGER,
jnxL2tpSessionStatsLCPRenegotiation
INTEGER,
jnxL2tpSessionStatsAuthMethod
INTEGER,
jnxL2tpSessionStatsNasIpAddrType
InetAddressType,
jnxL2tpSessionStatsNasIpAddress
InetAddress,
jnxL2tpSessionStatsNasIpPort
InetPortNumber,
jnxL2tpSessionStatsFramedProtocol
INTEGER,
jnxL2tpSessionStatsFramedIpAddrType
InetAddressType,
jnxL2tpSessionStatsFramedIpAddress
InetAddress,
jnxL2tpSessionStatsCallingStationID
SnmpAdminString,
jnxL2tpSessionStatsCalledStationID
SnmpAdminString,
jnxL2tpSessionStatsAcctDelayTime
Integer32,
jnxL2tpSessionStatsAcctSessionID
SnmpAdminString,
jnxL2tpSessionStatsAcctMethod
INTEGER,
jnxL2tpSessionStatsAcctSessionTime
Gauge32,
jnxL2tpSessionStatsAcctNasPortType
INTEGER,
jnxL2tpSessionStatsAcctTnlClientEndPoint
Integer32,
jnxL2tpSessionStatsAcctTnlServerEndPoint
Integer32,
jnxL2tpSessionStatsAcctTnlClientAuthID
SnmpAdminString,
jnxL2tpSessionStatsAcctTnlServerAuthID
SnmpAdminString,
jnxL2tpSessionStatsUserProfileName
SnmpAdminString,
jnxL2tpSessionStatsInterfaceID
SnmpAdminString,
jnxL2tpSessionStatsCallSerialNumber
Unsigned32,
jnxL2tpSessionStatsCreationTime
DateAndTime,
jnxL2tpSessionStatsUpTime
TimeTicks,
jnxL2tpSessionStatsIdleTime
TimeTicks,
jnxL2tpSessionStatsCollectionStart
DateAndTime,
jnxL2tpSessionStatsControlTxPkts
Counter32,
jnxL2tpSessionStatsControlTxBytes
Counter64,
jnxL2tpSessionStatsControlRxPkts
Counter32,
jnxL2tpSessionStatsControlRxBytes
Counter64,
jnxL2tpSessionStatsDataTxPkts
Counter32,
jnxL2tpSessionStatsDataTxBytes
Counter64,
jnxL2tpSessionStatsDataRxPkts
Counter32,
jnxL2tpSessionStatsDataRxBytes
Counter64,
jnxL2tpSessionStatsErrorTxPkts
Counter32,
jnxL2tpSessionStatsErrorRxPkts
Counter32,
jnxL2tpSessionStatsControlTxBytes32
Counter32,
jnxL2tpSessionStatsControlRxBytes32
Counter32,
jnxL2tpSessionStatsDataTxPkts64
Counter64,
jnxL2tpSessionStatsDataRxPkts64
Counter64
}
jnxL2tpSessionStatsLocalTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the local tunnel Identifier."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpSessionStatsEntry 1 }
jnxL2tpSessionStatsLocalSID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the local session Identifier."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpSessionStatsEntry 2 }
jnxL2tpSessionStatsServiceInterface OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the service
interface on which this session is being hosted."
::= { jnxL2tpSessionStatsEntry 3 }
jnxL2tpSessionStatsTunnelGroup OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the name of the tunnel
group that this session is part of."
::= { jnxL2tpSessionStatsEntry 4 }
jnxL2tpSessionStatsRemoteSID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote end assigned
session identifier for this session. When a session
is starting this value may be zero until the remote
tunnel endpoint has responded."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpSessionStatsEntry 5 }
jnxL2tpSessionStatsInterfaceUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the interface unit number
corresponding to the logical service interface
on which the session is being hosted."
::= { jnxL2tpSessionStatsEntry 6 }
jnxL2tpSessionStatsEncapType OBJECT-TYPE
SYNTAX INTEGER {
ppp(1),
multilink-ppp(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the tunnel encapsulation
type."
::= { jnxL2tpSessionStatsEntry 7 }
jnxL2tpSessionStatsBundleID OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundle that this
session is a link of. This field is valid
only for tunnel encapsulation type multilink-ppp."
::= { jnxL2tpSessionStatsEntry 8 }
jnxL2tpSessionStatsState OBJECT-TYPE
SYNTAX INTEGER {
established(1),
closed(2),
destroyed(3),
cleanup(4),
lns-ic-accept-new(5),
lns-ic-idle(6),
lns-ic-reject-new(7),
lns-ic-wait-connect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the current state of the
session - one of the internal session related
state names as described below:
established
The session is operating
closed
The session is being closed
destroyed
The session is being destroyed
cleanup
The session is being cleaned up
lns_ic_accept_new
A new session is being accepted
lns_ic_idle
The session has been created and is idle
lns_ic_reject_new
The new session is being rejected
lns_ic_wait_connect
The session is waiting for the peer's incoming
call connected (ICCN) message."
::= { jnxL2tpSessionStatsEntry 9 }
jnxL2tpSessionStatsUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the peer session name on
this interface. This is typically the login name
of the remote user. If the user name is unknown to
the local tunnel peer then this object will contain
a null string."
::= { jnxL2tpSessionStatsEntry 10 }
jnxL2tpSessionStatsMode OBJECT-TYPE
SYNTAX INTEGER {
shared(1),
dedicate(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the configured mode value for
this session."
::= { jnxL2tpSessionStatsEntry 11 }
jnxL2tpSessionStatsLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of the local
end address of the tunnel that is hosting
this session."
::= { jnxL2tpSessionStatsEntry 12 }
jnxL2tpSessionStatsLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local end address
of the tunnel that is hosting this session."
::= { jnxL2tpSessionStatsEntry 13 }
jnxL2tpSessionStatsLocalUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the UDP port of the
local end of the tunnel that is hosting
this session."
::= { jnxL2tpSessionStatsEntry 14 }
jnxL2tpSessionStatsRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of the remote end
address of the tunnel hosting this session."
::= { jnxL2tpSessionStatsEntry 15 }
jnxL2tpSessionStatsRemoteAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote end address
of the tunnel hosting this session."
::= { jnxL2tpSessionStatsEntry 16 }
jnxL2tpSessionStatsRemoteUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the UDP port of the
remote end of the tunnel hosting this session."
::= { jnxL2tpSessionStatsEntry 17 }
jnxL2tpSessionStatsLocalHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local host name
of the tunnel that is hosting this session."
::= { jnxL2tpSessionStatsEntry 18 }
jnxL2tpSessionStatsRemoteHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the host name as discovered
during the tunnel establishment phase (via the Host
Name AVP) of the L2TP peer."
::= { jnxL2tpSessionStatsEntry 19 }
jnxL2tpSessionAssignedIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of IP address of PPP client
being tunneled as obtained from IPCP configuration
during session establishment."
::= { jnxL2tpSessionStatsEntry 20 }
jnxL2tpSessionAssignedIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IP address of the PPP client
being tunneled as obtained from IPCP configuration
during session establishment."
::= { jnxL2tpSessionStatsEntry 21 }
jnxL2tpSessionLocalMRU OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the MRU for the local PPP
Entity. This value is the MRU that the remote
entity is using when sending packets to this
session."
::= { jnxL2tpSessionStatsEntry 22 }
jnxL2tpSessionRemoteMRU OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the MRU for the remote
PPP Entity. This value is the MRU that the
local entity is using when sending packets to
the remote PPP client."
::= { jnxL2tpSessionStatsEntry 23 }
jnxL2tpSessionStatsTxSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the last known transmit
baud rate for this session."
::= { jnxL2tpSessionStatsEntry 24 }
jnxL2tpSessionStatsRxSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the last known receive
baud rate for this session established."
::= { jnxL2tpSessionStatsEntry 25 }
jnxL2tpSessionStatsCallBearerType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
digital(2),
analog(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the bearer type of this
session."
::= { jnxL2tpSessionStatsEntry 26 }
jnxL2tpSessionStatsFramingType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sync(2),
async(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the framing type of this
session."
::= { jnxL2tpSessionStatsEntry 27 }
jnxL2tpSessionStatsLCPRenegotiation OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns whether LCP renegotiation
is on or off for this session."
::= { jnxL2tpSessionStatsEntry 28 }
jnxL2tpSessionStatsAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
text(2),
pppChap(3),
pppPap(4),
pppEap(5),
pppMsChapV1(6),
pppMsChapV2(7),
other(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the proxy authentication
method employed by the LAC for the session."
::= { jnxL2tpSessionStatsEntry 29 }
jnxL2tpSessionStatsNasIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the type of IP address of the RADIUS
network address server to which the accounting
records for this session are being sent to."
::= { jnxL2tpSessionStatsEntry 30 }
jnxL2tpSessionStatsNasIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IP address of the RADIUS
network address server to which the accounting
records for this session are being sent to."
::= { jnxL2tpSessionStatsEntry 31 }
jnxL2tpSessionStatsNasIpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the port on which RADIUS
network address server accounting messages will
be sent."
::= { jnxL2tpSessionStatsEntry 32 }
jnxL2tpSessionStatsFramedProtocol OBJECT-TYPE
SYNTAX INTEGER {
ppp(1),
slip(2),
arap(3),
gandalf(4),
xylogicsIPX-SLIP(5),
x75-sync(6),
none(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the frame protocol attribute
obtained from RADIUS server for this session."
REFERENCE "RFC 2865, Section 5.7"
::= { jnxL2tpSessionStatsEntry 33 }
jnxL2tpSessionStatsFramedIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the type of address to be
configured for the user, as provided by the
RADIUS server in response to authentication request."
REFERENCE "RFC 2865, Section 5.8"
::= { jnxL2tpSessionStatsEntry 34 }
jnxL2tpSessionStatsFramedIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the address to be
configured for the user, as provided by the
RADIUS server in response to authentication request."
REFERENCE "RFC 2865, Section 5.8"
::= { jnxL2tpSessionStatsEntry 35 }
jnxL2tpSessionStatsCallingStationID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute allows the RADIUS NAS to send in the
Access-Request packet the phone number that the
call came from, using Automatic Number
Identification (ANI) or similar technology.
It is only used in Access-Request packets."
REFERENCE "RFC 2865, Section 5.31"
::= { jnxL2tpSessionStatsEntry 36 }
jnxL2tpSessionStatsCalledStationID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute allows the RADIUS NAS to send in the
Access-Request packet the phone number that the
user called, using Dialed Number Identification
(DNIS) or similar technology. It is only used in
Access-Request packets."
REFERENCE "RFC 2865, Section 5.30"
::= { jnxL2tpSessionStatsEntry 37 }
jnxL2tpSessionStatsAcctDelayTime OBJECT-TYPE
SYNTAX Integer32(0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates how many seconds the
RADIUS accounting client has been trying
to send a record for, and can be subtracted from the
time of arrival on the server to find the
approximate time of the event generating this
Accounting-Request."
REFERENCE "RFC 2866, Section 5.2"
::= { jnxL2tpSessionStatsEntry 38 }
jnxL2tpSessionStatsAcctSessionID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is a unique Accounting ID to make
it easy to match start and stop records in a log
file."
REFERENCE "RFC 2866, Section 5.5"
::= { jnxL2tpSessionStatsEntry 39 }
jnxL2tpSessionStatsAcctMethod OBJECT-TYPE
SYNTAX INTEGER {
radius(1),
local(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the accounting method
employed for this session."
::= { jnxL2tpSessionStatsEntry 40 }
jnxL2tpSessionStatsAcctSessionTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates how many seconds the
user has received service for."
REFERENCE "RFC 2866, Section 5.7"
::= { jnxL2tpSessionStatsEntry 41 }
jnxL2tpSessionStatsAcctNasPortType OBJECT-TYPE
SYNTAX INTEGER {
async(1),
sync(2),
isdn-sync(3),
isdn-asunc-v-120(4),
isdn-async-v-110(5),
virtual(6),
piafs(7),
hdlc-clear-channel(8),
x-25(9),
x-75(10),
g-3-fax(11),
sdsl(12),
adsl-cap(13),
adsl-dmt(14),
idsl(15),
ethernet(16),
xdsl(17),
cable(18),
wireless-other(19),
wireless-ieee-802-1(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the type of the physical
port of the NAS which is performing accounting for
the user."
REFERENCE "RFC 2865, Section 5.41"
::= { jnxL2tpSessionStatsEntry 42 }
jnxL2tpSessionStatsAcctTnlClientEndPoint OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote tunnel Identifier of
the tunnel hosting this session."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpSessionStatsEntry 43 }
jnxL2tpSessionStatsAcctTnlServerEndPoint OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local tunnel Identifier of
the tunnel hosting this session."
REFERENCE "RFC 2661, Section 3.1"
::= { jnxL2tpSessionStatsEntry 44 }
jnxL2tpSessionStatsAcctTnlClientAuthID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the host name as discovered
during the tunnel establishment phase (via the Host
Name AVP) of the L2TP peer, for the tunnel that is
hosting this session."
::= { jnxL2tpSessionStatsEntry 45 }
jnxL2tpSessionStatsAcctTnlServerAuthID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local host name
of the tunnel that is hosting this session."
::= { jnxL2tpSessionStatsEntry 46 }
jnxL2tpSessionStatsUserProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the configured access
profile name that is being used for this session."
::= { jnxL2tpSessionStatsEntry 47 }
jnxL2tpSessionStatsInterfaceID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the interface identification
(name) for the session bearing service interface."
::= { jnxL2tpSessionStatsEntry 48 }
jnxL2tpSessionStatsCallSerialNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the serial number that has
been assigned to this session."
::= { jnxL2tpSessionStatsEntry 49 }
jnxL2tpSessionStatsCreationTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time of creation of
this session."
::= { jnxL2tpSessionStatsEntry 50 }
jnxL2tpSessionStatsUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time elapsed
since this session was established."
::= { jnxL2tpSessionStatsEntry 51 }
jnxL2tpSessionStatsIdleTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time elapsed
since this session had last data activity
(transmission or reception)."
::= { jnxL2tpSessionStatsEntry 52 }
jnxL2tpSessionStatsCollectionStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time at which the
statistics gathering started for this session."
::= { jnxL2tpSessionStatsEntry 53 }
jnxL2tpSessionStatsControlTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
packets that were transmitted to the session
peer."
::= { jnxL2tpSessionStatsEntry 54 }
jnxL2tpSessionStatsControlTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of control
bytes that were transmitted to the session
peer. This is deprecated and replaced by
jnxL2tpSessionStatsControlTxBytes32"
::= { jnxL2tpSessionStatsEntry 55 }
jnxL2tpSessionStatsControlRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control packets
received on the session."
::= { jnxL2tpSessionStatsEntry 56 }
jnxL2tpSessionStatsControlRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of control
bytes that were received from the session
peer. This is deprecated and replaced by
jnxL2tpSessionStatsControlRxBytes32"
::= { jnxL2tpSessionStatsEntry 57 }
jnxL2tpSessionStatsDataTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of data packets
transmitted to the remote session peer. This is
deprecated and replaced by jnxL2tpSessionStatsDataTxPkts64"
::= { jnxL2tpSessionStatsEntry 58 }
jnxL2tpSessionStatsDataTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data
bytes that were transmitted to the session
peer."
::= { jnxL2tpSessionStatsEntry 59 }
jnxL2tpSessionStatsDataRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the number of data packets
received on this session. This is deprecated and
replaced by jnxL2tpSessionStatsDataRxPkts64"
::= { jnxL2tpSessionStatsEntry 60 }
jnxL2tpSessionStatsDataRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data
bytes that were received from the session
peer."
::= { jnxL2tpSessionStatsEntry 61 }
jnxL2tpSessionStatsErrorTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of error
transmit packets on the session."
::= { jnxL2tpSessionStatsEntry 62 }
jnxL2tpSessionStatsErrorRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of error
receive packets on the session."
::= { jnxL2tpSessionStatsEntry 63 }
jnxL2tpSessionStatsControlTxBytes32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
bytes that were transmitted to the session
peer."
::= { jnxL2tpSessionStatsEntry 64 }
jnxL2tpSessionStatsControlRxBytes32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
bytes that were received from the session
peer."
::= { jnxL2tpSessionStatsEntry 65 }
jnxL2tpSessionStatsDataTxPkts64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data packets
transmitted to the remote session peer."
::= { jnxL2tpSessionStatsEntry 66 }
jnxL2tpSessionStatsDataRxPkts64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of data packets
received on this session."
::= { jnxL2tpSessionStatsEntry 67 }
--
-- The L2TP Multilink PPP bundle statistics table
--
jnxL2tpMlpppBundleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2tpMlpppBundleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP MLPPP bundle status and statistics table. This
table contains the objects that can be used to
describe the current status and statistics of a
single L2TP tunneled multilink PPP bundle."
::= { jnxL2tpObjects 5 }
jnxL2tpMlpppBundleStatsEntry OBJECT-TYPE
SYNTAX JnxL2tpMlpppBundleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2TP MLPPP bundle statistics entry."
INDEX { jnxL2tpMlpppBundleStatsBundleID }
::= { jnxL2tpMlpppBundleStatsTable 1 }
JnxL2tpMlpppBundleStatsEntry ::=
SEQUENCE {
jnxL2tpMlpppBundleStatsBundleID
Integer32,
jnxL2tpMlpppBundleStatsNumLinks
Integer32,
jnxL2tpMlpppBundleStatsEndpoint
SnmpAdminString,
jnxL2tpMlpppBundleStatsInputMrru
Integer32,
jnxL2tpMlpppBundleStatsOutputMrru
Integer32
}
jnxL2tpMlpppBundleStatsBundleID OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the session's associated
bundle."
::= { jnxL2tpMlpppBundleStatsEntry 1 }
jnxL2tpMlpppBundleStatsNumLinks OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current number
of links that have joined the bundle."
::= { jnxL2tpMlpppBundleStatsEntry 2 }
jnxL2tpMlpppBundleStatsEndpoint OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the username
of the MLPPP bundle."
::= { jnxL2tpMlpppBundleStatsEntry 3 }
jnxL2tpMlpppBundleStatsInputMrru OBJECT-TYPE
SYNTAX Integer32 (64..4500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum
packet size that the input inteface can
process."
::= { jnxL2tpMlpppBundleStatsEntry 4 }
jnxL2tpMlpppBundleStatsOutputMrru OBJECT-TYPE
SYNTAX Integer32 (64..4500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum
packet size that the output interface can
process."
::= { jnxL2tpMlpppBundleStatsEntry 5 }
END