mibs/MIBS/junos/JUNIPER-ALARM-MIB

--
-- Juniper Enterprise Specific MIB: Alarm MIB
-- 
-- Copyright (c) 2001-2003, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-ALARM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Gauge32
        FROM SNMPv2-SMI
    TimeStamp
        FROM SNMPv2-TC
    jnxMibs
        FROM JUNIPER-SMI;

jnxAlarms MODULE-IDENTITY
    LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:46 2003 UTC
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
            "        Juniper Technical Assistance Center
                     Juniper Networks, Inc.
                     1133 Innovation Way
                     Sunnyvale, CA 94089
                     E-mail: support@juniper.net"

    DESCRIPTION
            "This is Juniper Networks' implementation of enterprise
	     specific MIB for alarms from the router chassis box."
    ::= { jnxMibs 4 }




--  ::= { jnxAlarms 1 }			This OID is obsolete.


--
-- Craft Alarms
--

    jnxCraftAlarms 	  OBJECT IDENTIFIER ::= { jnxAlarms 2 }


    jnxAlarmRelayMode OBJECT-TYPE
	SYNTAX		INTEGER {
		other(1),	-- other or unknown
		passOn(2),	-- alarms being passed on
		cutOff(3)	-- alarms being cut off
	}		
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The alarm relay mode of the craft interface
		panel for both yellow and red alarms.

		Both yellow and red alarms could be cut off 
		by a front panel Alarm Cutoff / Lamp Test 
		(ACO/LT) button.

		In the pass-on mode, the alarm relay will be 
		activated to pass on the yellow or red alarms.
		In the cut-off mode, both yellow and red alarms
		will be cut off from the alarm relays which are 
		normally connected to audible sirens or visual 
		flashing devices."


	::= { jnxCraftAlarms 1 }


    jnxYellowAlarms 	  OBJECT IDENTIFIER ::= { jnxCraftAlarms 2 }

    jnxYellowAlarmState OBJECT-TYPE
	SYNTAX		INTEGER {
			other(1),	-- alarm state is unknown
			off(2),		-- alarm is off
			on(3)		-- alarm is on
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The yellow alarm state on the craft interface 
		panel.

		The yellow alarm is on when there is some 
		system warning such as maintenance alert or 
		significant temperature increase.

		This yellow alarm state could be turned off 
		by the ACO/LT (Alarm Cut Off / Lamp Test) button
		on the front panel module."


	::= { jnxYellowAlarms 1 }

    jnxYellowAlarmCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of currently active and non-silent 
		yellow alarms.

		This object is independent of the ACO/LT (Alarm
		Cut Off / Lamp Test) button."


	::= { jnxYellowAlarms 2 }


    jnxYellowAlarmLastChange OBJECT-TYPE
	SYNTAX		TimeStamp
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The value of sysUpTime when the yellow alarm
		last changed - either from off to on or vice
		versa. 	Zero if unknown or never changed since
		the agent was up."


	::= { jnxYellowAlarms 3 }


    jnxRedAlarms 	  OBJECT IDENTIFIER ::= { jnxCraftAlarms 3 }

    jnxRedAlarmState OBJECT-TYPE
	SYNTAX		INTEGER {
			other(1),	-- alarm state is unknown
			off(2),		-- alarm is off
			on(3)		-- alarm is on
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The red alarm indication on the craft interface 
		panel.

		The red alarm is on when there is some system 
		failure or power supply failure or the system 
		is experiencing a hardware malfunction or some 
		threshold is being exceeded.

		This red alarm state could be turned off by the
		ACO/LT (Alarm Cut Off / Lamp Test) button on the
		front panel module."


	::= { jnxRedAlarms 1 }


    jnxRedAlarmCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of currently active and non-silent 
		red alarms.

		This object is independent of the ACO/LT (Alarm
		Cut Off / Lamp Test) button."


	::= { jnxRedAlarms 2 }


    jnxRedAlarmLastChange OBJECT-TYPE
	SYNTAX		TimeStamp
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The value of sysUpTime when the red alarm
		last changed - either from off to on or vice
		versa. 	Zero if unknown or never changed since
		the agent was up."


	::= { jnxRedAlarms 3 }


END