david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junos/JUNIPER-DFC-MIB

841 lines
29 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
JUNIPER-DFC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32, Counter64
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 2571
InterfaceIndex
FROM IF-MIB
jnxMibs, jnxDfcNotifications
FROM JUNIPER-SMI;
jnxDfc MODULE-IDENTITY
LAST-UPDATED "200507082153Z" -- Fri Jul 08 21:53:48 2005 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' implementation of enterprise
specific MIB for Dynamic Flow Capture (DFC)"
::= { jnxMibs 33 }
jnxDfcCSTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxDfcCSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics information for Control Source."
::= { jnxDfc 1 }
jnxDfcCSEntry OBJECT-TYPE
SYNTAX JnxDfcCSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of DFC Control Source table."
INDEX { jnxDfcGrpName,
jnxDfcCSId }
::= { jnxDfcCSTable 1 }
JnxDfcCSEntry ::=
SEQUENCE {
jnxDfcGrpName DisplayString,
jnxDfcCSId DisplayString,
jnxDfcCSControlProtocolAddRequests Counter64,
jnxDfcCSCriteriaAdded Counter64,
jnxDfcCSCriteriaAdditionFailed Counter64,
jnxDfcCSControlProtocolDeleteRequests Counter64,
jnxDfcCSCriteriaDeleted Counter64,
jnxDfcCSCriteriaDeletionFailed Counter64,
jnxDfcCSCriteriaDeletedTimeoutIdle Counter64,
jnxDfcCSCriteriaDeletedTimeoutTotal Counter64,
jnxDfcCSCriteriaDeletedPackets Counter64,
jnxDfcCSCriteriaDeletedBytes Counter64,
jnxDfcCSControlProtocolRefreshRequests Counter64,
jnxDfcCSCriteriaRefreshed Counter64,
jnxDfcCSCriteriaRefreshFailed Counter64,
jnxDfcCSControlProtocolListRequests Counter64,
jnxDfcCSListSuccess Counter64,
jnxDfcCSListFailed Counter64,
jnxDfcCSControlProtocolNoopRequests Counter64,
jnxDfcCSNoopSuccess Counter64,
jnxDfcCSNoopFailed Counter64,
jnxDfcCSDynamicCriteriaActive Counter64,
jnxDfcCSStaticCriteriaActive Counter64,
jnxDfcCSBadRequest Counter64,
jnxDfcCSResponseSuccessful Counter64,
jnxDfcCSResponseImproperCriteria Counter64,
jnxDfcCSResponseUnknownContentDest Counter64,
jnxDfcCSResponseUnknownCriteriaId Counter64,
jnxDfcCSResponseImproperTimeout Counter64,
jnxDfcCSResponseInvalidAuthentication Counter64,
jnxDfcCSResponseInvalidSequenceNumber Counter64,
jnxDfcCSResponseInternalError Counter64,
jnxDfcCSNotificationRestart Counter64,
jnxDfcCSNotificationRollover Counter64,
jnxDfcCSNotificationNoop Counter64,
jnxDfcCSNotificationTimeout Counter64,
jnxDfcCSNotificationCongestion Counter64,
jnxDfcCSNotificationCongestionDelete Counter64,
jnxDfcCSNotificationDuplicatesDropped Counter64,
jnxDfcCSAddRequestRate Counter64,
jnxDfcCSAddRequestPeakRate Counter64,
jnxDfcCSAggrCriteriaBandwidth Counter64,
jnxDfcCSSequenceNumber Counter64
}
jnxDfcGrpName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name assigned to a DFC group. A DFC group defines a set of DFC
PICs that share same static/dynamic
configuration."
::= { jnxDfcCSEntry 1 }
jnxDfcCSId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Control Source identifier. Control Source identifies Juniper router
with one unique Control IP address. There can be multiple IP
addresses from which a Control Source can send Control protocol
request to Juniper router."
::= { jnxDfcCSEntry 2 }
jnxDfcCSControlProtocolAddRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Control protocol Add requests received. The add
request specifies a new filter criteria to be merged with the
existing tasking list for a given Control Source and Content
Destination."
::= { jnxDfcCSEntry 3 }
jnxDfcCSCriteriaAdded OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria added successfully by the Control
Source."
::= { jnxDfcCSEntry 4 }
jnxDfcCSCriteriaAdditionFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria addition failed."
::= { jnxDfcCSEntry 5 }
jnxDfcCSControlProtocolDeleteRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Control protocol delete requests received. The
delete request removes a particular filter criterion."
::= { jnxDfcCSEntry 6 }
jnxDfcCSCriteriaDeleted OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria deleted successfully as requested
by Control Source."
::= { jnxDfcCSEntry 7 }
jnxDfcCSCriteriaDeletionFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria deletion failed."
::= { jnxDfcCSEntry 8 }
jnxDfcCSCriteriaDeletedTimeoutIdle OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of criteria deleted by timeout idle."
::= { jnxDfcCSEntry 9 }
jnxDfcCSCriteriaDeletedTimeoutTotal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of criteria deleted by timeout total."
::= { jnxDfcCSEntry 10 }
jnxDfcCSCriteriaDeletedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of criteria deleted by packets."
::= { jnxDfcCSEntry 11 }
jnxDfcCSCriteriaDeletedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of criteria deleted by bytes."
::= { jnxDfcCSEntry 12 }
jnxDfcCSControlProtocolRefreshRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Control protocol Refresh requests received. The
refresh request updates the timeout for a particular filter
criterion or set of filter criteria for the particular Control
Source to a particular Content Destination."
::= { jnxDfcCSEntry 13 }
jnxDfcCSCriteriaRefreshed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria refreshed successfully as requested
by Control Source."
::= { jnxDfcCSEntry 14 }
jnxDfcCSCriteriaRefreshFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria refresh request failed."
::= { jnxDfcCSEntry 15 }
jnxDfcCSControlProtocolListRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Control protocol List requests received. The List
request returns a list of all criteria that a particular Control
Source has added and are currently active."
::= { jnxDfcCSEntry 16 }
jnxDfcCSListSuccess OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of list commands processed successfully as requested
by Control Source."
::= { jnxDfcCSEntry 17 }
jnxDfcCSListFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of list commands that could not be processed
successfully."
::= { jnxDfcCSEntry 18 }
jnxDfcCSControlProtocolNoopRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Control protocol Noop requests received. The purpose
of this request is to verify the end-to-end connectivity between
Control Source and DFC PIC."
::= { jnxDfcCSEntry 19 }
jnxDfcCSNoopSuccess OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Noop requests processed successfully as requested by
Control Source."
::= { jnxDfcCSEntry 20 }
jnxDfcCSNoopFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Noop requests that could not be processed
successfully."
::= { jnxDfcCSEntry 21 }
jnxDfcCSDynamicCriteriaActive OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active dynamic filter criteria."
::= { jnxDfcCSEntry 22 }
jnxDfcCSStaticCriteriaActive OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active static filter criteria."
::= { jnxDfcCSEntry 23 }
jnxDfcCSBadRequest OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Bad requests received."
::= { jnxDfcCSEntry 24 }
jnxDfcCSResponseSuccessful OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful response(s) corresponding to the
requests (add, delete, refresh, list and noop) sent out to the
Control Source."
::= { jnxDfcCSEntry 25 }
jnxDfcCSResponseImproperCriteria OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of improper filter
criterion specification in the add request."
::= { jnxDfcCSEntry 26 }
jnxDfcCSResponseUnknownContentDest OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of unknown Content
Destination specified in the add, delete, refresh and list
request."
::= { jnxDfcCSEntry 27 }
jnxDfcCSResponseUnknownCriteriaId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of unknown Criteria
Identifier specified in the delete, refresh and list request."
::= { jnxDfcCSEntry 28 }
jnxDfcCSResponseImproperTimeout OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of improper timeout
specified in the add and refresh request."
::= { jnxDfcCSEntry 29 }
jnxDfcCSResponseInvalidAuthentication OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of invalid
authentication specified in the add, delete, refresh, list and
noop request."
::= { jnxDfcCSEntry 30 }
jnxDfcCSResponseInvalidSequenceNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of invalid Sequence
Number specified in the add, delete, refresh, list and noop
request."
::= { jnxDfcCSEntry 31 }
jnxDfcCSResponseInternalError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of response(s) generated because of internal error at
the DFC PIC in processing a request."
::= { jnxDfcCSEntry 32 }
jnxDfcCSNotificationRestart OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Restart notifications sent to configured
notification-recipients. This notification will be generated when
the system experiences a failure such that all the DFC filter
criteria are lost."
::= { jnxDfcCSEntry 33 }
jnxDfcCSNotificationRollover OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Rollover notifications sent to configured
notification-recipients. This notification will be generated when
the DFC PIC experiences a sequence number rollover."
::= { jnxDfcCSEntry 34 }
jnxDfcCSNotificationNoop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Noop notifications sent to configured
notification-recipents. This notification will be generated when
the DFC PIC receives a Noop message with the SendAsync parameter
present."
::= { jnxDfcCSEntry 35 }
jnxDfcCSNotificationTimeout OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Timeout notifications sent to configured
notification-recipents. This notification will be generated when
the DFC PIC times out a filter criterion on any one of its
configured timeout parameters and the criterion contains a
SendTimeoutAsync parameter."
::= { jnxDfcCSEntry 36 }
jnxDfcCSNotificationCongestion OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Congestion notifications sent to configured
notification-recipents. This notification will be generated when
the 10-second average packet forwarding rate (in bits/second)
summed over all active filter criteria to a configured Content
Destination exceeds the configured soft limit for that destination."
::= { jnxDfcCSEntry 37 }
jnxDfcCSNotificationCongestionDelete OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Congestion Delete notifications sent to configured
notification-recipents. This notification will be generated when
the total 10-second average packet forwarding rate (in bits/second)
summed over all active filter criteria to a configured Content
Destination exceeds the configured hard limit for that
destination."
::= { jnxDfcCSEntry 38 }
jnxDfcCSNotificationDuplicatesDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Duplicates Dropped notifications sent to configured
notification-recipents. This notification will be generated when
the configurable Maximum Duplicates parameter has been exceeded in
such a way as to cause packets matching criteria added by the
corresponding Control Source to be dropped."
::= { jnxDfcCSEntry 39 }
jnxDfcCSAddRequestRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The request processing rate (requests processed/second)."
::= { jnxDfcCSEntry 40 }
jnxDfcCSAddRequestPeakRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peak request processing rate (requests processed/second)."
::= { jnxDfcCSEntry 41 }
jnxDfcCSAggrCriteriaBandwidth OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bandwidth in bits/second."
::= { jnxDfcCSEntry 42 }
jnxDfcCSSequenceNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol sequence number."
::= { jnxDfcCSEntry 43 }
------------------------------------------------------------
jnxDfcCDTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxDfcCDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics information for content destination."
::= { jnxDfc 2 }
jnxDfcCDEntry OBJECT-TYPE
SYNTAX JnxDfcCDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of DFC Content-Destination table."
INDEX { jnxDfcGrpName,
jnxDfcCDId }
::= { jnxDfcCDTable 1 }
JnxDfcCDEntry ::=
SEQUENCE {
jnxDfcCDId DisplayString,
jnxDfcCDCriteria Counter64,
jnxDfcCDByteRate Counter64,
jnxDfcCDMatchedPackets Counter64,
jnxDfcCDMatchedBytes Counter64,
jnxDfcCDCongestionNotification Counter64
}
jnxDfcCDId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Content Destination identifier. A Content Destination is the
recipient of the extracted data, once it is forwarded by the
Server."
::= { jnxDfcCDEntry 1 }
jnxDfcCDCriteria OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of filter criteria configured for the Content
Destination."
::= { jnxDfcCDEntry 2 }
jnxDfcCDByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average data rate (in bytes/second) summed over all active
filter criteria to a configured Content Destination."
::= { jnxDfcCDEntry 3 }
jnxDfcCDMatchedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets matching the filter criteria configured for
the Content Destination."
::= { jnxDfcCDEntry 4 }
jnxDfcCDMatchedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes matching the filter criteria configured for
the Content Destination."
::= { jnxDfcCDEntry 5 }
jnxDfcCDCongestionNotification OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Congestion Notifications sent to a configured
notification-recipient."
::= { jnxDfcCDEntry 6 }
--
-- DFC PIC Notification objects
--
jnxDfcNotifyVars OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Notification object definitions."
::= { jnxDfc 3 }
jnxDfcInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The textual name of the DFC interface."
::= { jnxDfcNotifyVars 1 }
jnxDfcInputPktRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"data packet rate (in packets per second)."
::= { jnxDfcNotifyVars 2 }
jnxDfcPpsSoftOverloadLowWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Configured lowest value for data packet rate (in packets
per second)."
::= { jnxDfcNotifyVars 3 }
jnxDfcPpsSoftOverloadHighWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Configured highest value for data packet rate (in packets
per second)."
::= { jnxDfcNotifyVars 4 }
jnxDfcPpsHardOverloadLowWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended lowest value for data packet rate (in packets
per second)."
::= { jnxDfcNotifyVars 5 }
jnxDfcPpsHardOverloadHighWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended highest value for data packet rate (in packets
per second)."
::= { jnxDfcNotifyVars 6 }
jnxDfcFlowsUsage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"% usage of total number of flows in system."
::= { jnxDfcNotifyVars 7 }
jnxDfcCriteriaUsage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"% usage of matching criteria for all filters."
::= { jnxDfcNotifyVars 8 }
jnxDfcMemSoftOverloadLowWatermark OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Configured lowest watermark percent for memory load."
::= { jnxDfcNotifyVars 9 }
jnxDfcMemSoftOverloadHighWatermark OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Configured highest watermark percent for memory load."
::= { jnxDfcNotifyVars 10 }
jnxDfcFlowLowWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended lowest value for number of flows allowed in
the system."
::= { jnxDfcNotifyVars 11 }
jnxDfcFlowHighWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended highest value for number of flows allowed in
the system."
::= { jnxDfcNotifyVars 12 }
jnxDfcCriteriaLowWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended lowest value for number of criterias allowed
in the system."
::= { jnxDfcNotifyVars 13 }
jnxDfcCriteriaHighWatermark OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Recommended highest value for number of criterias allowed
in the system."
::= { jnxDfcNotifyVars 14 }
--
-- DFC PIC Notification definitions
--
jnxDfcNotificationPrefix OBJECT-IDENTITY
STATUS current
DESCRIPTION
"All DFC notifications are registered under this branch."
::= { jnxDfcNotifications 0 }
jnxDfcSoftPpsThresholdExceeded NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcInputPktRate,
jnxDfcPpsSoftOverloadLowWatermark,
jnxDfcPpsSoftOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of input packet rate (in packet per second)
going beyond the configured limit."
::= { jnxDfcNotificationPrefix 1 }
jnxDfcSoftPpsUnderThreshold NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcInputPktRate,
jnxDfcPpsSoftOverloadLowWatermark,
jnxDfcPpsSoftOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of input packet rate (in packet per second)
dropping back to below the configured limit."
::= { jnxDfcNotificationPrefix 2 }
jnxDfcHardPpsThresholdExceeded NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcInputPktRate,
jnxDfcPpsHardOverloadLowWatermark,
jnxDfcPpsHardOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of input packet rate (in packet per second)
going beyond the recommended limit."
::= { jnxDfcNotificationPrefix 3 }
jnxDfcHardPpsUnderThreshold NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcInputPktRate,
jnxDfcPpsHardOverloadLowWatermark,
jnxDfcPpsHardOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of input packet rate (in packet per second)
dropping back to below the recommended limit."
::= { jnxDfcNotificationPrefix 4 }
jnxDfcSoftMemThresholdExceeded NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcFlowsUsage,
jnxDfcCriteriaUsage,
jnxDfcMemSoftOverloadLowWatermark,
jnxDfcMemSoftOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of memory overload condition i.e memory usage
is going beyond the configured limit."
::= { jnxDfcNotificationPrefix 5 }
jnxDfcSoftMemUnderThreshold NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcFlowsUsage,
jnxDfcCriteriaUsage,
jnxDfcMemSoftOverloadLowWatermark,
jnxDfcMemSoftOverloadHighWatermark}
STATUS current
DESCRIPTION
"Notification of memory usage dropping back to below the
configured limit."
::= { jnxDfcNotificationPrefix 6 }
jnxDfcHardMemThresholdExceeded NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcFlowsUsage,
jnxDfcFlowLowWatermark,
jnxDfcFlowHighWatermark,
jnxDfcCriteriaUsage,
jnxDfcCriteriaLowWatermark,
jnxDfcCriteriaHighWatermark}
STATUS current
DESCRIPTION
"Notification of memory overload condition i.e memory usage
is going beyond the recommended limit."
::= { jnxDfcNotificationPrefix 7 }
jnxDfcHardMemUnderThreshold NOTIFICATION-TYPE
OBJECTS { jnxDfcInterfaceName,
jnxDfcFlowsUsage,
jnxDfcFlowLowWatermark,
jnxDfcFlowHighWatermark,
jnxDfcCriteriaUsage,
jnxDfcCriteriaLowWatermark,
jnxDfcCriteriaHighWatermark}
STATUS current
DESCRIPTION
"Notification of memory usage dropping back to below the
recommended limit."
::= { jnxDfcNotificationPrefix 8 }
END
Reference in New Issue Copy Permalink