mibs/MIBS/junos/JUNIPER-IF-ACCOUNTING-MIB

330 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *******************************************************************
-- Juniper enterprise specific QoS based Interface Accounting MIB.
--
-- Copyright (c) 2001-2006, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
-- *******************************************************************
JUNIPER-IF-ACCOUNTING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter64
FROM SNMPv2-SMI
CounterBasedGauge64
FROM HCNUM-TC
InterfaceIndex
FROM IF-MIB
JnxCosFcIdentifier
FROM JUNIPER-COS-MIB
ifJnx
FROM JUNIPER-IF-MIB;
jnxIfAccountingStats MODULE-IDENTITY
LAST-UPDATED "201312250000Z" -- Wed Dec 25 12:00:00 2013 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION "MIB module to define Forwarding Class based Interface statistics.
The statistics will provide protocol specific statistics value
which includes L2 overhead bytes. The mib is currently supported
only on MX platforms."
REVISION "201305151223Z" -- Wed May 25 12:23:51 2013 UTC
DESCRIPTION "MIB module to define QoS based Interface accounting."
REVISION "201312250000Z" -- Wed Dec 25 12:00:00 2013 UTC
DESCRIPTION "MIB module extended to support inline accounting for Per
Forwarding-class stats table for Aggregate
(all types of traffic) pkt/byte counters & rate"
::= { ifJnx 10 }
-- ***************************************************************
-- Per Forwarding-class stats table
-- ***************************************************************
jnxIfFcAccountStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfFcAccountStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table presents the per forwarding-class and
per protocol type statistics."
::= { jnxIfAccountingStats 1 }
jnxIfFcAccountStatEntry OBJECT-TYPE
SYNTAX JnxIfFcAccountStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table presents the per forwarding-class and
per protocol type statistics. The indices of the
table are Interface Index, Forwarding class Index
and Protocol type"
INDEX { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol }
::= { jnxIfFcAccountStatTable 1 }
JnxIfFcAccountStatEntry ::=
SEQUENCE {
jnxIfFcIfIndex InterfaceIndex,
jnxIfFcFcIndex JnxCosFcIdentifier,
jnxIfFcProtocol INTEGER,
-- input packet/byte stats for unicast traffic
jnxIfFcHCInUcastPkts Counter64,
jnxIfFcHCInUcastOctets Counter64,
-- output packet/byte stats for unicast traffic
jnxIfFcHCOutUcastPkts Counter64,
jnxIfFcHCOutUcastOctets Counter64,
-- input packet/byte stats for multicast traffic
jnxIfFcHCInMcastPkts Counter64,
jnxIfFcHCInMcastOctets Counter64,
-- output packet/byte stats for multicast traffic
jnxIfFcHCOutMcastPkts Counter64,
jnxIfFcHCOutMcastOctets Counter64
}
jnxIfFcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface."
::= { jnxIfFcAccountStatEntry 1 }
jnxIfFcFcIndex OBJECT-TYPE
SYNTAX JnxCosFcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Forwarding Class Index of the interface."
::= { jnxIfFcAccountStatEntry 2 }
--Protocol family for accounting all is aggregate of all types
jnxIfFcProtocol OBJECT-TYPE
SYNTAX INTEGER {
all (1),
ipv4 (2),
ipv6 (3),
mpls (4),
layer2 (5),
other (6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol type of the entry's traffic."
::= { jnxIfFcAccountStatEntry 3 }
--input packet/byte stats for unicast traffic
jnxIfFcHCInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast packets ingressed."
::= { jnxIfFcAccountStatEntry 4 }
--input packet/byte stats for unicast traffic
jnxIfFcHCInUcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast bytes ingressed."
::= { jnxIfFcAccountStatEntry 5 }
--output packet/byte stats for unicast traffic
jnxIfFcHCOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast packets egressed."
::= { jnxIfFcAccountStatEntry 6 }
--output packet/byte stats for unicast traffic
jnxIfFcHCOutUcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast bytes egressed."
::= { jnxIfFcAccountStatEntry 7 }
--input packet/byte stats for multicast traffic
jnxIfFcHCInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets ingressed."
::= { jnxIfFcAccountStatEntry 8 }
--input packet/byte stats for multicast traffic
jnxIfFcHCInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast bytes ingressed."
::= { jnxIfFcAccountStatEntry 9 }
--output packet/byte stats for multicast traffic
jnxIfFcHCOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets egressed."
::= { jnxIfFcAccountStatEntry 10 }
--output packet/byte stats for multicast traffic
jnxIfFcHCOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast bytes egressed."
::= { jnxIfFcAccountStatEntry 11 }
-- ***************************************************************
-- Per Forwarding-class stats table for Aggregate(all types of traffic) pkt/byte counters & rate
-- ***************************************************************
jnxIfFcInlineAccountingStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfFcInlineAccountingStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table presents the per forwarding-class and per family
statistics without considering the traffic types."
::= { jnxIfAccountingStats 2 }
jnxIfFcInlineAccountingStatEntry OBJECT-TYPE
SYNTAX JnxIfFcInlineAccountingStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table presents the per forwarding-class and
per protocol type statistics. The indices of the
table are Interface Index, Forwarding class Index
and protocol(family) type as defined below."
INDEX { jnxIfFcIfIndex, jnxIfFcFcIndex, jnxIfFcProtocol }
::= { jnxIfFcInlineAccountingStatTable 1 }
JnxIfFcInlineAccountingStatEntry ::=
SEQUENCE {
-- Indices of the table
jnxIfFcIfIndex InterfaceIndex,
jnxIfFcFcIndex JnxCosFcIdentifier,
jnxIfFcProtocol INTEGER,
-- input packet & rate stats for all types of traffic
jnxIfFcInlineHCInPkts Counter64,
jnxIfFcInlineHCInPktsSecRate CounterBasedGauge64,
-- input bytes & rate stats for all types of traffic
jnxIfFcInlineHCInOctets Counter64,
jnxIfFcInlineHCInOctetsSecRate CounterBasedGauge64,
-- output packet & rate stats for all types of traffic
jnxIfFcInlineHCOutPkts Counter64,
jnxIfFcInlineHCOutPktsSecRate CounterBasedGauge64,
-- output bytes & rate stats for all types of traffic
jnxIfFcInlineHCOutOctets Counter64,
jnxIfFcInlineHCOutOctetsSecRate CounterBasedGauge64
}
--input packet stats for all types of traffic
jnxIfFcInlineHCInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets ingressed."
::= { jnxIfFcInlineAccountingStatEntry 1 }
--input packets per sec rate
jnxIfFcInlineHCInPktsSecRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets rate ingressed per second."
::= { jnxIfFcInlineAccountingStatEntry 2 }
--input byte stats for all types of traffic
jnxIfFcInlineHCInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes ingressed."
::= { jnxIfFcInlineAccountingStatEntry 3 }
--input bytes per sec for all types of traffic
jnxIfFcInlineHCInOctetsSecRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes rate ingressed per second."
::= { jnxIfFcInlineAccountingStatEntry 4 }
--output packets stats for all types of traffic
jnxIfFcInlineHCOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets egressed."
::= { jnxIfFcInlineAccountingStatEntry 5 }
--output packets per sec for all types of traffic
jnxIfFcInlineHCOutPktsSecRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets rate egressed per second."
::= { jnxIfFcInlineAccountingStatEntry 6 }
--output byte stats for all types of traffic
jnxIfFcInlineHCOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes egressed."
::= { jnxIfFcInlineAccountingStatEntry 7 }
--output bytes per sec for all types of traffic
jnxIfFcInlineHCOutOctetsSecRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes rate egressed per second."
::= { jnxIfFcInlineAccountingStatEntry 8 }
END