mibs/MIBS/junos/JUNIPER-IFOPTICS-MIB

8302 lines
294 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Juniper Enterprise Specific MIB: Optics management
--
-- Copyright (c) 2012-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-IFOPTICS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, NOTIFICATION-TYPE,
Unsigned32, Counter32, Integer32
FROM SNMPv2-SMI
DisplayString, DateAndTime, TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
ifIndex, ifDescr
FROM IF-MIB
jnxOpticsMibRoot, jnxOpticsNotifications, jnxIplcNotifications, jnxIlaNotifications
FROM JUNIPER-SMI;
jnxIfOpticsMib MODULE-IDENTITY
LAST-UPDATED "201805020000Z" -- Wed May 2, 2018 00:00:00 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION "Deprecated OCh2 related tables and entries"
REVISION "201609280000Z"
DESCRIPTION
"Removed INDEX clause from unwanted places"
REVISION "201609122018Z"
DESCRIPTION
" Added Optics table entries for handling sub-port
in the interface name. With suffix OCH2"
REVISION "201506241242Z"
DESCRIPTION
"This MIB module defines objects used for managing the
Optics interface for Juniper products."
REVISION "201201260000Z"
DESCRIPTION
"Added Optics Config, Alarms and PM data."
REVISION "201201260000Z"
DESCRIPTION
"Initial revision."
REVISION "201605310000Z" -- 31-May-16
DESCRIPTION
"Corrected name in table sequence"
REVISION "201805020000Z" -- 2-May-18
DESCRIPTION
"Added jnxOpticsOTIfHighPolarization object"
REVISION "201808090000Z" -- 9-Aug-18
DESCRIPTION
"Added FRR related pre-FEC BER threshold objects for ot interface"
::= { jnxOpticsMibRoot 1 }
--
-- Textual Conventions
--
JnxOpticsLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Near End or Far End "
SYNTAX INTEGER {
jnxNearEnd(1),
jnxFarEnd(2)
}
JnxOpticsDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Indicates the direction as Rx/Tx or bi-directional."
SYNTAX INTEGER {
jnxTxDir(1),
jnxRxDir(2),
jnxBiDir(3)
}
JnxOpticsSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Severity of the Notification"
SYNTAX INTEGER {
jnxCritical(1),
jnxMajor(2),
jnxMinor(3),
jnxInfo(4)
}
JnxOpticsServiceStateAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Notification's action on the service state"
SYNTAX INTEGER {
jnxNotSupported(0),
jnxNonServiceAffecting(1),
jnxServiceAffecting(2)
}
JnxOpticsChannelSpacing ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Channel spacing
1 - 100 Ghz
2 - 50 GHz
3 - 25 GHz
4 - 12.5 GHz
5 - 6.25 Ghz "
SYNTAX INTEGER {
spacing100Ghz(1),
spacing50Ghz(2),
spacing25Ghz(3),
spacing12point5Ghz(4),
spacing6point5Ghz(5)
}
JnxOpticsOTIfFecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "fec modes of an interface OT interface"
SYNTAX INTEGER {
none(0),
sdfec(1),
sdfec25(2),
hgfec(3),
sdfec15(4)
}
JnxOpticsOTIfEncodingOptions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Encoding Options supported on OT interface"
SYNTAX INTEGER {
unknown (0),
differential(1),
non-differential(2)
}
JnxOpticsOTIfAdminStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Admin states for an interface"
SYNTAX INTEGER {
jnxAdminStateInService(1),
-- In service
jnxAdminStateInServiceMA(2),
-- In service maintenance, the link is in
-- service, but alarms are suppressed
jnxAdminStateOutofService(3),
-- Out of service due to a fault
jnxAdminStateOutofServiceMA(4)
-- OOS maintenance as configured by the
-- user, may or may not have alarms`
}
JnxOpticsOTIfOperStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Operational states for an interface"
SYNTAX INTEGER {
jnxOperStateInit(1),
-- Starting state of the interface
jnxOperStateNormal(2),
-- The interface is working normally
jnxOperStateFault(3),
-- There is some traffic affecting fault
-- on the interface eg LOS
jnxOperStateDegraded(4)
-- There is some function affecting
-- degrading the performance on the
-- interface for eg BER
}
--
-- All the notifications related to the optics module
--
JnxOpticsNotificationId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Optic alarm types"
SYNTAX INTEGER {
jnxOpticsLOS(1), -- input loss of signal
jnxOpticsWavelenthLockErr(2), -- wavelength lock
jnxOpticsPowerHighAlarm(3), -- Tx high power alarm
jnxOpticsPowerLowAlarm(4), -- Tx low power alarm
jnxOpticsBiasCurrentHighAlarm(5), -- Bias Current High
jnxOpticsBiasCurrentLowAlarm(6), -- Bias Current Low
jnxOpticsTemperatureHighAlarm(7), -- Temperature High
jnxOpticsTemperaturelowAlarm(8), -- Temperature low
jnxOpticsTxPLLLockAlarm(9), -- Tx PLL Lock
jnxOpticsRxPLLLockAlarm(10), -- Rx PLL Lock
jnxOpticsAvgPowerAlarm(11), -- Avg Power
jnxOpticsRxLossAvgPowerAlarm(12), -- Rx Loss Avg Power
jnxOpticsLossofACPowerAlarm(13), -- Loss of AC Power
jnxOpticsTxPowerHighThreshAlert(14), -- Tx Power High TCA
jnxOpticsTxPowerLowThreshAlert(15), -- Tx Power Low TCA
jnxOpticsRxPowerHighThreshAlert(16), -- Rx Power High TCA
jnxOpticsRxPowerLowThreshAlert(17), -- Rx Power Low TCA
jnxOpticsModuleTempHighThreshAlert(18), -- Temp High TCA
jnxOpticsModuleTempLowThreshAlert(19), -- Temp Low TCA
jnxOptics24HourTxPowerHighThreshAlert(20), -- 24 HourTxPowerHigh TCA
jnxOptics24HourTxPowerLowThreshAlert(21), -- 24 HourTxPowerLow TCA
jnxOptics24HourRxPowerHighThreshAlert(22), -- 24 HourRxPowerHigh TCA
jnxOptics24HourRxPowerLowThreshAlert(23), -- 24 HourRxPowerLow TCA
jnxOptics24HourModuleTempHighThreshAlert(24), -- 24 Hour Temp High TCA
jnxOptics24HourModuleTempLowThreshAlert(25), -- 24 Hour Temp Low TCA
jnxOpticsRxPowerHighAlarm(26), -- Rx high power alarm
jnxOpticsRxPowerLowAlarm(27), -- Rx high power alarm
jnxOpticsTxPowerHighWarning(28), -- Rx high power warning
jnxOpticsTxPowerLowWarning(29), -- Rx high power warning
jnxOpticsRxPowerHighWarning(30), -- Rx high power warning
jnxOpticsRxPowerLowWarning(31), -- Rx high power warning
jnxOpticsModuleTempHighWarning(32), -- Mod temp high warning
jnxOpticsModuleTempLowWarning(33), -- Mod temp low warning
jnxOpticsRxCarrierFreqHigh(34), -- rx Carrier freq high
-- warning
jnxOpticsRxCarrierFreqLow(35), -- rx Carrier freq low
-- warning
jnxOpticsChromaticDispHighWarning(36), -- CD high warning
jnxOpticsChromaticDispLowWarning(37), -- CD low warning
jnxOpticsQLowWarning(38), -- Q low warning
jnxOpticsOSNRLowWarning(39), -- OSNR low warning
jnxOpticsCarrierFreqHighAlert(40), -- Carrier freq high
-- TCA
jnxOpticsCarrierFreqLowAlert(41), -- Carrier freq Low
-- TCA
jnxOptics24HourCarrierFreqHighAlert(42), -- Carrier freq high
-- TCA 24Hour
jnxOptics24HourCarrierFreqLowAlert(43), -- Carrier freq Low
-- TCA 24Hour
jnxOpticsLossOfLock(44), -- Loss Of Lock
jnxOpticsLossOfSignal(45), -- Loss Of Signal
jnxOpticsLossOfFrame(46), -- Loss Of Frame
jnxOpticsLossOfMultiFrame(47), -- Loss Of Multi Frame
jnxOpticsOTUBDI(48), -- Loss of backward defect indication
jnxOpticsRxModemSYncFault(49), -- Rx Modem Sync Fault
jnxOpticsRxModemLOL(50), -- Rx Modem Loss of Lock
jnxOpticsRxLOA(51), -- Rx Loss of Alignment
jnxOpticsModBiasControlLoopFail(52), -- Modulator bias control loop fail
jnxOpticsILTAfault(53), -- ILTA fault
jnxOpticsDACcalibrationfault(54), -- DAC calibration fault
jnxOpticsADCcalibrationfault(55), -- ADC calibration fault
jnxOpticsTecCurrentHighAlert(56), -- TEC Current high alarm
jnxOpticsTecCurrentLowAlert(57), -- TEC Current low alarm
jnxOpticsPamHistogramHighAlert(58), -- PAM Histogram high alarm
jnxOpticsResidualIsiHighAlert(59), -- Residual ISI high alarm
jnxOpticsResidualIsiLowAlert(60), -- Residual ISI low alarm
jnxOpticsFecCorrectedErrorsHighAlert(61), -- Fec-Corrected Error Ratio high alarm
jnxOpticsFecUCorrectedWordsHighAlert(62), -- Fec-UCorrected Words Ratio high alarm
jnxOptics24HourTecCurrentHighAlert(63), -- TCA 24Hour - TEC Current high alarm
jnxOptics24HourTecCurrentLowAlert(64), -- TCA 24Hour - TEC Current low alarm
jnxOptics24HourPamHistogramHighAlert(65), -- TCA 24Hour - PAM Histogram high alarm
jnxOptics24HourResidualIsiHighAlert(66), -- TCA 24Hour - Residual ISI high alarm
jnxOptics24HourResidualIsiLowAlert(67), -- TCA 24Hour - Residual ISI low alarm
jnxOptics24HourFecCorrectedErrorsHighAlert(68), -- TCA 24Hour - Fec-Corrected Error Ratio high alarm
jnxOptics24HourFecUCorrectedWordsHighAlert(69), -- TCA 24Hour - Fec-UCorrected Words Ratio high alarm
jnxOpticsLaserFreqErrorHighAlert(70), -- Laser freq error high
-- TCA
jnxOpticsLaserFreqErrorLowAlert(71), -- Laser freq error Low
-- TCA
jnxOptics24HourLaserFreqErrorHighAlert(72), -- Laser freq error high
-- TCA 24Hour
jnxOptics24HourLaserFreqErrorLowAlert(73), -- Laser freq error Low
-- TCA 24Hour
jnxOpticsSnrLowAlert(74), -- SNR low warning
jnxOptics24HourSnrLowAlert(75), -- SNR low warning
-- TCA 24Hour
jnxOpticsPreFecBERHighAlert(76), -- PreFecBER warning
jnxOptics24HourPreFecBERHignAlert(77) -- PreFecBER warning
-- TCA 24Hour
}
JnxIplcNotificationId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Iplc alarm types"
SYNTAX INTEGER {
jnxIplcFpcAwgAddLosAlarm(1),
jnxIplcFpcExpInLosAlarm(2),
jnxIplcFpcOscAddLosAlarm(3),
jnxIplcFpcOscDrpLosAlarm(4),
jnxIplcFpcLineInLosAlarm(5),
jnxIplcFpcEdfa1RefPwAlarm(6),
jnxIplcFpcEdfa1OutPwAlarm(7),
jnxIplcFpcEdfa1OutGain(8),
jnxIplcFpcEdfa1PumpEolAlarm(9),
jnxIplcFpcEdfa1TempAlarm(10),
jnxIplcFpcEdfa1OutLosAlarm(11),
jnxIplcFpcEdfa1InLosAlarm(12),
jnxIplcFpcEdfa2RefPwAlarm(13),
jnxIplcFpcEdfa2OutPwAlarm(14),
jnxIplcFpcEdfa2OutGainAlarm(15),
jnxIplcFpcEdfa2PumpEolAlarm(16),
jnxIplcFpcEdfa2TempAlarm(17),
jnxIplcFpcEdfa2OutLosAlarm(18),
jnxIplcFpcEdfa2InLosAlarm(19),
jnxIplcFpcWssTempAlarm(20),
jnxIplcFpcWssVoltAlarm(21),
jnxIplcFpcInterDiagAlarm(22),
jnxIplcFpcFwCnsistAlarm(23),
jnxIplcFpcHwFailAlarm(24),
jnxIplcFpcFwFailAlarm(25),
jnxIplcFpcOcmFailAlarm(26),
jnxIplcFpcWssFailAlarm(27),
jnxIplcFpcEdfa2FailAlarm(28),
jnxIplcFpcEdfa1FailAlarm(29),
jnxIplcFpcPwrFailAlarm(30),
jnxIplcOscTxPowerHigh15minAlert(31), -- Tx high power alarm(tca 15 minutes):
jnxIplcOscTxPowerLow15minAlert(32), -- Tx low power alarm
jnxIplcOscRxPowerHigh15minAlert(33), -- Rx high power alarm
jnxIplcOscRxPowerLow15minAlert(34), -- Rx low power alarm
jnxIplcOscFiberLosHigh15minAlert(35),
jnxIplcOscFiberLosLow15minAlert(36),
jnxIplcLineOutVoaHigh15minAlert(37),
jnxIplcLineOutVoaLow15minAlert(38),
jnxIplcIngressEdfaInputPwHigh15minAlert(39),
jnxIplcIngressEdfaInputPwLow15minAlert(40),
jnxIplcIngressEdfaOutputPwHigh15minAlert(41),
jnxIplcIngressEdfaOutputPwLow15minAlert(42),
jnxIplcIngressEdfaSignalPwHigh15minAlert(43),
jnxIplcIngressEdfaSignalPwLow15minAlert(44),
jnxIplcIngressEdfaPumpCurrentHigh15minAlert(45),
jnxIplcIngressEdfaPumpCurrentLow15minAlert(46),
jnxIplcEgressEdfaInputPwHigh15minAlert(47),
jnxIplcEgressEdfaInputPwLow15minAlert(48),
jnxIplcEgressEdfaOutputPwHigh15minAlert(49),
jnxIplcEgressEdfaOutputPwLow15minAlert(50),
jnxIplcEgressEdfaSignalPwHigh15minAlert(51),
jnxIplcEgressEdfaSignalPwLow15minAlert(52),
jnxIplcEgressEdfaPumpCurrentHigh15minAlert(53),
jnxIplcEgressEdfaPumpCurrentLow15minAlert(54),
jnxIplcPowerMonitorAwgAddHigh15minAlert(55),
jnxIplcPowerMonitorAwgAddLow15minAlert(56),
jnxIplcPowerMonitorExpressInHigh15minAlert(57),
jnxIplcPowerMonitorExpressInLow15minAlert(58),
jnxIplcOcmPwHigh15minAlert(59),
jnxIplcOcmPwLow15minAlert(60),
jnxIplcOscTxPowerHigh24hourAlert(61), -- Tx high power alarm(tca 24hour):
jnxIplcOscTxPowerLow24hourAlert(62), -- Tx low power alarm
jnxIplcOscRxPowerHigh24hourAlert(63), -- Rx high power alarm
jnxIplcOscRxPowerLow24hourAlert(64), -- Rx low power alarm
jnxIplcOscFiberLosHigh24hourAlert(65),
jnxIplcOscFiberLosLow24hourAlert(66),
jnxIplcLineOutVoaHigh24hourAlert(67),
jnxIplcLineOutVoaLow24hourAlert(68),
jnxIplcIngressEdfaInputPwHigh24hourAlert(69),
jnxIplcIngressEdfaInputPwLow24hourAlert(70),
jnxIplcIngressEdfaOutputPwHigh24hourAlert(71),
jnxIplcIngressEdfaOutputPwLow24hourAlert(72),
jnxIplcIngressEdfaSignalPwHigh24hourAlert(73),
jnxIplcIngressEdfaSignalPwLow24hourAlert(74),
jnxIplcIngressEdfaPumpCurrentHigh24hourAlert(75),
jnxIplcIngressEdfaPumpCurrentLow24hourAlert(76),
jnxIplcEgressEdfaInputPwHigh24hourAlert(77),
jnxIplcEgressEdfaInputPwLow24hourAlert(78),
jnxIplcEgressEdfaOutputPwHigh24hourAlert(79),
jnxIplcEgressEdfaOutputPwLow24hourAlert(80),
jnxIplcEgressEdfaSignalPwHigh24hourAlert(81),
jnxIplcEgressEdfaSignalPwLow24hourAlert(82),
jnxIplcEgressEdfaPumpCurrentHigh24hourAlert(83),
jnxIplcEgressEdfaPumpCurrentLow24hourAlert(84),
jnxIplcPowerMonitorAwgAddHigh24hourAlert(85),
jnxIplcPowerMonitorAwgAddLow24hourAlert(86),
jnxIplcPowerMonitorExpressInHigh24hourAlert(87),
jnxIplcPowerMonitorExpressInLow24hourAlert(88),
jnxIplcOcmPwHigh24hourAlert(89),
jnxIplcOcmPwLow24hourAlert(90),
jnxIplcFpcSfpLosAlarm(91),
jnxIplcFpcSfpLofAlarm(92)
}
JnxIlaNotificationId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Ila alarm types"
SYNTAX INTEGER {
jnxIlaBoardTemperatureAbnormalAlarm(1),
jnxIlaPower0AbnormalAlarm(2),
jnxIlaPower1AbnormalAlarm(3),
jnxIlaFan0MissingAlarm(4),
jnxIlaFan1MissingAlarm(5),
jnxIlaFan2MissingAlarm(6),
jnxIlaFan0SpeedAbnormalAlarm(7),
jnxIlaFan1SpeedAbnormalAlarm(8),
jnxIlaFan2SpeedAbnormalAlarm(9),
jnxIlaSoftwareVersionAbnormalAlarm(10),
jnxIlaCommunicationAbnormalAlarm(11),
jnxIlaTableErrAlarm(12),
jnxIlaEdfaEabCaseTemperatureAlarm(13),
jnxIlaEdfaEabRFLAlarm(14),
jnxIlaEdfaEabOOPAlarm(15),
jnxIlaEdfaEabOOGAlarm(16),
jnxIlaEdfaEabPump0EOLAlarm(17),
jnxIlaEdfaEabPump1EOLAlarm(18),
jnxIlaEdfaEabPump0TemperatureAlarm(19),
jnxIlaEdfaEabPump1TemperatureAlarm(20),
jnxIlaEdfaEabInputLOSAlarm(21),
jnxIlaEdfaEabOutputLOSAlarm(22),
jnxIlaEdfaEabCaliTableErrAlarm(23),
jnxIlaEdfaEbaCaseTemperatureAlarm(24),
jnxIlaEdfaEbaRFLAlarm(25),
jnxIlaEdfaEbaOOPAlarm(26),
jnxIlaEdfaEbaOOGAlarm(27),
jnxIlaEdfaEbaPump0EOLAlarm(28),
jnxIlaEdfaEbaPump1EOLAlarm(29),
jnxIlaEdfaEbaPump0TemperatureAlarm(30),
jnxIlaEdfaEbaPump1TemperatureAlarm(31),
jnxIlaEdfaEbaInputLOSAlarm(32),
jnxIlaEdfaEbaOutputLOSAlarm(33),
jnxIlaEdfaEbaCaliTableErrAlarm(34),
jnxIlaOscaAddPowerLOSAlarm(35),
jnxIlaOscaDropPowerLOSAlarm(36),
jnxIlaOscbAddPowerLOSAlarm(37),
jnxIlaOscbDropPowerLOSAlarm(38),
jnxIlaOscATxPwrLow15minAlert(39),
jnxIlaOscATxPwrHigh15minAlert(40),
jnxIlaOscARxPwrLow15minAlert(41),
jnxIlaOscARxPwrHigh15minAlert(42),
jnxIlaOscAFibLossLow15minAlert(43),
jnxIlaOscAFibLossHigh15minAlert(44),
jnxIlaVoaALineOutLow15minAlert(45),
jnxIlaVoaALineOutHigh15minAlert(46),
jnxIlaOscBTxPwrLow15minAlert(47),
jnxIlaOscBTxPwrHigh15minAlert(48),
jnxIlaOscBRxPwrLow15minAlert(49),
jnxIlaOscBRxPwrHigh15minAlert(50),
jnxIlaOscBFibLossLow15minAlert(51),
jnxIlaOscBFibLossHigh15minAlert(52),
jnxIlaVoaBLineOutLow15minAlert(53),
jnxIlaVoaBLineOutHigh15minAlert(54),
jnxIlaEdfaABInputPwrLow15minAlert(55),
jnxIlaEdfaABInputPwrHigh15minAlert(56),
jnxIlaEdfaABOutputPwrLow15minAlert(57),
jnxIlaEdfaABOutputPwrHigh15minAlert(58),
jnxIlaEdfaABPump0CurLow15minAlert(59),
jnxIlaEdfaABPump0CurHigh15minAlert(60),
jnxIlaEdfaABPump1CurLow15minAlert(61),
jnxIlaEdfaABPump1CurHigh15minAlert(62),
jnxIlaEdfaABPump0TempLow15minAlert(63),
jnxIlaEdfaABPump0TempHigh15minAlert(64),
jnxIlaEdfaABPump1TempLow15minAlert(65),
jnxIlaEdfaABPump1TempHigh15minAlert(66),
jnxIlaEdfaBAInputPwrLow15minAlert(67),
jnxIlaEdfaBAInputPwrHigh15minAlert(68),
jnxIlaEdfaBAOutputPwrLow15minAlert(69),
jnxIlaEdfaBAOutputPwrHigh15minAlert(70),
jnxIlaEdfaBAPump0CurLow15minAlert(71),
jnxIlaEdfaBAPump0CurHigh15minAlert(72),
jnxIlaEdfaBAPump1CurLow15minAlert(73),
jnxIlaEdfaBAPump1CurHigh15minAlert(74),
jnxIlaEdfaBAPump0TempLow15minAlert(75),
jnxIlaEdfaBAPump0TempHigh15minAlert(76),
jnxIlaEdfaBAPump1TempLow15minAlert(77),
jnxIlaEdfaBAPump1TempHigh15minAlert(78),
jnxIla24HourOscATxPwrLowAlert(79),
jnxIla24HourOscATxPwrHighAlert(80),
jnxIla24HourOscARxPwrLowAlert(81),
jnxIla24HourOscARxPwrHighAlert(82),
jnxIla24HourOscAFibLossLowAlert(83),
jnxIla24HourOscAFibLossHighAlert(84),
jnxIla24HourVoaALineOutLowAlert(85),
jnxIla24HourVoaALineOutHighAlert(86),
jnxIla24HourOscBTxPwrLowAlert(87),
jnxIla24HourOscBTxPwrHighAlert(88),
jnxIla24HourOscBRxPwrLowAlert(89),
jnxIla24HourOscBRxPwrHighAlert(90),
jnxIla24HourOscBFibLossLowAlert(91),
jnxIla24HourOscBFibLossHighAlert(92),
jnxIla24HourVoaBLineOutLowAlert(93),
jnxIla24HourVoaBLineOutHighAlert(94),
jnxIla24HourEdfaABInputPwrLowAlert(95),
jnxIla24HourEdfaABInputPwrHighAlert(96),
jnxIla24HourEdfaABOutputPwrLowAlert(97),
jnxIla24HourEdfaABOutputPwrHighAlert(98),
jnxIla24HourEdfaABPump0CurLowAlert(99),
jnxIla24HourEdfaABPump0CurHighAlert(100),
jnxIla24HourEdfaABPump1CurLowAlert(101),
jnxIla24HourEdfaABPump1CurHighAlert(102),
jnxIla24HourEdfaABPump0TempLowAlert(103),
jnxIla24HourEdfaABPump0TempHighAlert(104),
jnxIla24HourEdfaABPump1TempLowAlert(105),
jnxIla24HourEdfaABPump1TempHighAlert(106),
jnxIla24HourEdfaBAInputPwrLowAlert(107),
jnxIla24HourEdfaBAInputPwrHighAlert(108),
jnxIla24HourEdfaBAOutputPwrLowAlert(109),
jnxIla24HourEdfaBAOutputPwrHighAlert(110),
jnxIla24HourEdfaBAPump0CurLowAlert(111),
jnxIla24HourEdfaBAPump0CurHighAlert(112),
jnxIla24HourEdfaBAPump1CurLowAlert(113),
jnxIla24HourEdfaBAPump1CurHighAlert(114),
jnxIla24HourEdfaBAPump0TempLowAlert(115),
jnxIla24HourEdfaBAPump0TempHighAlert(116),
jnxIla24HourEdfaBAPump1TempLowAlert(117),
jnxIla24HourEdfaBAPump1TempHighAlert(118),
jnxIlaEdfaABSignalPwrLow15minAlert(119),
jnxIlaEdfaABSignalPwrHigh15minAlert(120),
jnxIla24HourEdfaABSignalPwrLowAlert(121),
jnxIla24HourEdfaABSignalPwrHighAlert(122),
jnxIlaEdfaBASignalPwrLow15minAlert(123),
jnxIlaEdfaBASignalPwrHigh15minAlert(124),
jnxIla24HourEdfaBASignalPwrLowAlert(125),
jnxIla24HourEdfaBASignalPwrHighAlert(126),
jnxIlaEdfaABGainRangeErrAlarm(127),
jnxIlaEdfaBAGainRangeErrAlarm(128)
}
jnxOptics OBJECT IDENTIFIER ::= { jnxIfOpticsMib 1 }
jnxOpticsPerformanceMonitoring OBJECT IDENTIFIER ::= { jnxIfOpticsMib 2 }
jnxOpticsAlarm OBJECT IDENTIFIER ::= { jnxIfOpticsMib 3 }
jnxOpticsOCh2 OBJECT IDENTIFIER ::= { jnxIfOpticsMib 4 }
jnxIplcAlarm OBJECT IDENTIFIER ::= { jnxIfOpticsMib 5 }
jnxIlaAlarm OBJECT IDENTIFIER ::= { jnxIfOpticsMib 6 }
--
-- Optics config table
--
jnxOpticsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics config Table. "
::= { jnxOptics 1 }
jnxOpticsConfigEntry OBJECT-TYPE
SYNTAX JnxOpticsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the optics
config Table."
INDEX { jnxOpticsConfigContainerIndex, jnxOpticsConfigL1Index,
jnxOpticsConfigL2Index, jnxOpticsConfigL3Index }
::= { jnxOpticsConfigTable 1 }
JnxOpticsConfigEntry ::=
SEQUENCE {
jnxOpticsConfigContainerIndex
Integer32,
jnxOpticsConfigL1Index
Integer32,
jnxOpticsConfigL2Index
Integer32,
jnxOpticsConfigL3Index
Integer32,
jnxOpticsType
Integer32,
jnxLaserEnable
TruthValue,
jnxWavelength
Unsigned32,
jnxSpacing
JnxOpticsChannelSpacing,
jnxModulation
Unsigned32,
jnxTxOpticalPower
Integer32,
jnxRxOpticalPower
Integer32,
jnxModuleTempHighThresh
Integer32,
jnxModuleTempLowThresh
Integer32,
jnxTxPowerHighThresh
Integer32,
jnxTxPowerLowThresh
Integer32,
jnxRxPowerHighThresh
Integer32,
jnxRxPowerLowThresh
Integer32,
jnx24HourModuleTempHighThresh
Integer32,
jnx24HourModuleTempLowThresh
Integer32,
jnx24HourTxPowerHighThresh
Integer32,
jnx24HourTxPowerLowThresh
Integer32,
jnx24HourRxPowerHighThresh
Integer32,
jnx24HourRxPowerLowThresh
Integer32,
jnxRxLosPowerWarningThresh
Integer32,
jnxRxLosPowerAlarmThresh
Integer32,
jnxOpticsCurrentStatus
BITS,
jnxTxPowerHighEnableTCA
TruthValue,
jnxTxPowerLowEnableTCA
TruthValue,
jnxRxPowerHighEnableTCA
TruthValue,
jnxRxPowerLowEnableTCA
TruthValue,
jnxModuleTempHighEnableTCA
TruthValue,
jnxModuleTempLowEnableTCA
TruthValue,
jnxCarFreqOffsetHighEnableTCA
TruthValue,
jnxCarFreqOffsetLowEnableTCA
TruthValue,
jnxCarFreqOffsetHighThresh
Integer32,
jnx24HourCarFreqOffsetHighThresh
Integer32,
jnxCarFreqOffsetLowThresh
Integer32,
jnx24HourCarFreqOffsetLowThresh
Integer32
}
jnxOpticsConfigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxOpticsConfigEntry 1 }
jnxOpticsConfigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsConfigEntry 2 }
jnxOpticsConfigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsConfigEntry 3 }
jnxOpticsConfigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject.. eg port."
::= { jnxOpticsConfigEntry 4 }
jnxOpticsType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" 0 - none
1 - SFP
2 - XFP
3 - SFP+
4 - XFP+
5 - CFP
6 - CFP+
7 - Non pluggable
8 - QSFP DWDM"
::= { jnxOpticsConfigEntry 5 }
jnxLaserEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0 - laser off
1 - laser on "
::= { jnxOpticsConfigEntry 6 }
jnxWavelength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01 nm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit wavelength of the laser."
::= { jnxOpticsConfigEntry 7 }
jnxSpacing OBJECT-TYPE
SYNTAX JnxOpticsChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A minimum nominal difference in frequency (GHz) between two
adjacent channels."
::= { jnxOpticsConfigEntry 8 }
jnxModulation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Modulation
Unknown - (1),
NonPSK - (2),
ODB - (3),
DPSK - (4),
QPSK - (5),
DQPSK - (6),
DPQPSK - (7),
16QAM - (8),
64QAM - (9),
256QAM - (10)
"
::= { jnxOpticsConfigEntry 9 }
jnxTxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit optical power."
::= { jnxOpticsConfigEntry 10 }
jnxRxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive optical power."
::= { jnxOpticsConfigEntry 11 }
jnxModuleTempHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 12 }
jnxModuleTempLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 13 }
jnxTxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 14 }
jnxTxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 15 }
jnxRxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 16 }
jnxRxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 17 }
jnx24HourModuleTempHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 18 }
jnx24HourModuleTempLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 19 }
jnx24HourTxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 20 }
jnx24HourTxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx for a 24 hour period Power below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 21 }
jnx24HourRxPowerHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 22 }
jnx24HourRxPowerLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power for a 24 hour period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 23 }
jnxRxLosPowerWarningThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power warning threshold for seeting the optical LOS
warning. "
::= { jnxOpticsConfigEntry 24 }
jnxRxLosPowerAlarmThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Power alarm threshold for seeting the optical LOS
warning. "
::= { jnxOpticsConfigEntry 25 }
jnxOpticsCurrentStatus OBJECT-TYPE
SYNTAX BITS {
opticalLos(1),
wavelenthLockErr(2),
powerHighAlarm(3),
powerLowAlarm(4),
biasCurrentHighAlarm(5),
biasCurrentLowAlarm(6),
temperatureHighAlarm(7),
temperaturelowAlarm(8),
txPLLLockAlarm(9),
rxPLLLockAlarm(10),
avgPowerAlarm(11),
rxLossAvgPowerAlarm(12),
lossofACPowerAlarm(13),
txPowerHighThreshAlert(14),
txPowerLowThreshAlert(15),
rxPowerHighThreshAlert(16),
rxPowerLowThreshAlert(17),
moduleTempHighThreshAlert(18),
moduleTempLowThreshAlert(19),
txPowerHigh24HourThreshAlert(20),
txPowerLow24HourThreshAlert(21),
rxPowerHigh24HourThreshAlert(22),
rxPowerLow24HourThreshAlert(23),
moduleTempHigh24HourThreshAlert(24),
moduleTempLow24HourThreshAlert(25),
powerRxHighAlarm(26),
powerRxLowAlarm(27),
powerTxHighWarning(28),
powerTxLowWarning(29),
powerRxHighWarning(30),
powerRxLowWarning(31),
temperatureHighWarning(32),
temperaturelowWarning(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { jnxOpticsConfigEntry 26 }
jnxTxPowerHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Tx Power High TCA."
::= { jnxOpticsConfigEntry 27 }
jnxTxPowerLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Tx Power Low TCA."
::= { jnxOpticsConfigEntry 28 }
jnxRxPowerHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Rx Power High TCA."
::= { jnxOpticsConfigEntry 29 }
jnxRxPowerLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Rx Power Low TCA."
::= { jnxOpticsConfigEntry 30 }
jnxModuleTempHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Module Temp High TCA."
::= { jnxOpticsConfigEntry 31 }
jnxModuleTempLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Module Temp Low TCA."
::= { jnxOpticsConfigEntry 32 }
jnxCarFreqOffsetHighEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the Carrier Frequency Offset High TCA."
::= { jnxOpticsConfigEntry 33 }
jnxCarFreqOffsetLowEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable for the CarrierFreqOffetLow TCA's."
::= { jnxOpticsConfigEntry 34 }
jnxCarFreqOffsetHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 35 }
jnx24HourCarFreqOffsetHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 24 Hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 36 }
jnxCarFreqOffsetLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 15 minute period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 37 }
jnx24HourCarFreqOffsetLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Carrier frequency offset for a 24 Hour period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsConfigEntry 38 }
--
-- Tracetone config
--
jnxOpticsTraceToneCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsTraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics tests."
::= { jnxOptics 2 }
jnxOpticsTraceToneCfgEntry OBJECT-TYPE
SYNTAX JnxOpticsTraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the optics FRU's."
INDEX { jnxOpticsTraceToneCfgContainerIndex,
jnxOpticsTraceToneCfgL1Index,
jnxOpticsTraceToneCfgL2Index,
jnxOpticsTraceToneCfgL3Index }
::= { jnxOpticsTraceToneCfgTable 1 }
JnxOpticsTraceToneCfgEntry ::=
SEQUENCE {
jnxOpticsTraceToneCfgContainerIndex Integer32,
jnxOpticsTraceToneCfgL1Index Integer32,
jnxOpticsTraceToneCfgL2Index Integer32,
jnxOpticsTraceToneCfgL3Index Integer32,
jnxOpticsTraceToneCfgTxEnable TruthValue,
jnxOpticsTraceToneCfgRxEnable TruthValue,
jnxOpticsTraceToneCfgDestId OCTET STRING,
jnxOpticsTraceToneCfgTxMsg OCTET STRING,
jnxOpticsTraceToneCfgRxMsg OCTET STRING
}
jnxOpticsTraceToneCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxOpticsTraceToneCfgEntry 1 }
jnxOpticsTraceToneCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsTraceToneCfgEntry 2 }
jnxOpticsTraceToneCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsTraceToneCfgEntry 3 }
jnxOpticsTraceToneCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port."
::= { jnxOpticsTraceToneCfgEntry 4 }
jnxOpticsTraceToneCfgTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will enable/disable the transmit Trace tone feature."
::= { jnxOpticsTraceToneCfgEntry 5 }
jnxOpticsTraceToneCfgRxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will enable/disable the receive Trace tone feature."
::= { jnxOpticsTraceToneCfgEntry 6 }
jnxOpticsTraceToneCfgDestId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the destination Id of the link
ID/ the chassis and the blade.
The transmit messages will also have the src id
which is this chassis id and this port info."
::= { jnxOpticsTraceToneCfgEntry 7 }
jnxOpticsTraceToneCfgTxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will be the transmit data in the tracetone message."
::= { jnxOpticsTraceToneCfgEntry 8 }
jnxOpticsTraceToneCfgRxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This will be the receive data in the trace tone message."
::= { jnxOpticsTraceToneCfgEntry 9 }
--
-- Notification Trigger Table
--
jnxOpticsNotificationTrigDefaultHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxOptics 3 }
jnxOpticsNotificationTrigDefaultHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
absent before the alarm is cleared.
"
::= { jnxOptics 4 }
--
-- Table to configure individual optics notifications
--
jnxOpticsNotificationTrigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the otn Alarm/Alart/Info trigger table. "
::= { jnxOptics 5 }
jnxOpticsNotificationTrigEntry OBJECT-TYPE
SYNTAX JnxOpticsNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the Otn
Alarm Trigger Table.
"
INDEX { jnxOpticsNotificationTrigContainerIndex,
jnxOpticsNotificationTrigL1Index,
jnxOpticsNotificationTrigL2Index,
jnxOpticsNotificationTrigL3Index,
jnxOpticsNotificationTrigAlmId }
::= { jnxOpticsNotificationTrigTable 1 }
JnxOpticsNotificationTrigEntry ::=
SEQUENCE {
jnxOpticsNotificationTrigContainerIndex
Integer32,
jnxOpticsNotificationTrigL1Index
Integer32,
jnxOpticsNotificationTrigL2Index
Integer32,
jnxOpticsNotificationTrigL3Index
Integer32,
jnxOpticsNotificationTrigAlmId
JnxOpticsNotificationId,
jnxOpticsNotificationTrigSeverity
JnxOpticsSeverity,
jnxOpticsNotificationTrigIgnore
TruthValue,
jnxOpticsNotificationTrigHoldtimeUp
Integer32,
jnxOpticsNotificationTrigHoldtimeDown
Integer32,
jnxOpticsTrigServiceStateAction
JnxOpticsServiceStateAction
}
jnxOpticsNotificationTrigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf."
::= { jnxOpticsNotificationTrigEntry 1 }
jnxOpticsNotificationTrigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsNotificationTrigEntry 2 }
jnxOpticsNotificationTrigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsNotificationTrigEntry 3 }
jnxOpticsNotificationTrigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxOpticsNotificationTrigEntry 4 }
jnxOpticsNotificationTrigAlmId OBJECT-TYPE
SYNTAX JnxOpticsNotificationId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This will be the type of Alarm as defined by
JnxOpticsNotificationId
"
::= { jnxOpticsNotificationTrigEntry 5 }
jnxOpticsNotificationTrigSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This will be the Severity of the Notification.
"
::= { jnxOpticsNotificationTrigEntry 6 }
jnxOpticsNotificationTrigIgnore OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will ignore the alarm when set.
"
::= { jnxOpticsNotificationTrigEntry 7 }
jnxOpticsNotificationTrigHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxOpticsNotificationTrigEntry 8 }
jnxOpticsNotificationTrigHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) the defect is
absent before the alarm is cleared.
"
::= { jnxOpticsNotificationTrigEntry 9 }
jnxOpticsTrigServiceStateAction OBJECT-TYPE
SYNTAX JnxOpticsServiceStateAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This will indicate whether this alarm is service affecting
or not .
"
::= { jnxOpticsNotificationTrigEntry 10 }
--
-- Optical PM data
--
jnxOpticsPMCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 1 }
jnxOpticsPMCurrentEntry OBJECT-TYPE
SYNTAX JnxOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Current
Table."
INDEX { ifIndex }
::= { jnxOpticsPMCurrentTable 1 }
JnxOpticsPMCurrentEntry ::= SEQUENCE {
jnxPMCurChromaticDispersion
Integer32,
jnxPMCurDiffGroupDelay
Integer32,
jnxPMCurPolarizationState
Integer32,
jnxPMCurPolarDepLoss
Integer32,
jnxPMCurQ
Integer32,
jnxPMCurSNR
Integer32,
jnxPMCurTxOutputPower
Integer32,
jnxPMCurRxInputPower
Integer32,
jnxPMCurMinChromaticDispersion
Integer32,
jnxPMCurMaxChromaticDispersion
Integer32,
jnxPMCurAvgChromaticDispersion
Integer32,
jnxPMCurMinDiffGroupDelay
Integer32,
jnxPMCurMaxDiffGroupDelay
Integer32,
jnxPMCurAvgDiffGroupDelay
Integer32,
jnxPMCurMinPolarState
Integer32,
jnxPMCurMaxPolarState
Integer32,
jnxPMCurAvgPolarState
Integer32,
jnxPMCurMinPolarDepLoss
Integer32,
jnxPMCurMaxPolarDepLoss
Integer32,
jnxPMCurAvgPolarDepLoss
Integer32,
jnxPMCurMinQ
Integer32,
jnxPMCurMaxQ
Integer32,
jnxPMCurAvgQ
Integer32,
jnxPMCurMinSNR
Integer32,
jnxPMCurMaxSNR
Integer32,
jnxPMCurAvgSNR
Integer32,
jnxPMCurMinTxOutputPower
Integer32,
jnxPMCurMaxTxOutputPower
Integer32,
jnxPMCurAvgTxOutputPower
Integer32,
jnxPMCurMinRxInputPower
Integer32,
jnxPMCurMaxRxInputPower
Integer32,
jnxPMCurAvgRxInputPower
Integer32,
jnxPMCurSuspectedFlag
TruthValue,
jnxPMCurSuspectReason
Integer32,
jnxPMCurTxLaserBiasCurrent
Integer32,
jnxPMCurMinTxLaserBiasCurrent
Integer32,
jnxPMCurMaxTxLaserBiasCurrent
Integer32,
jnxPMCurAvgTxLaserBiasCurrent
Integer32,
jnxPMCurTemperature
Integer32,
jnxPMCurMinTemperature
Integer32,
jnxPMCurMaxTemperature
Integer32,
jnxPMCurAvgTemperature
Integer32,
jnxPMCurCarFreqOffset
Integer32,
jnxPMCurMinCarFreqOffset
Integer32,
jnxPMCurMaxCarFreqOffset
Integer32,
jnxPMCurAvgCarFreqOffset
Integer32,
jnxPMCurRxLaserBiasCurrent
Integer32,
jnxPMCurMinRxLaserBiasCurrent
Integer32,
jnxPMCurMaxRxLaserBiasCurrent
Integer32,
jnxPMCurAvgRxLaserBiasCurrent
Integer32,
jnxPMCurTecCurrent
Integer32,
jnxPMCurMinTecCurrent
Integer32,
jnxPMCurMaxTecCurrent
Integer32,
jnxPMCurAvgTecCurrent
Integer32,
jnxPMCurResidualDispersion
Integer32,
jnxPMCurMinResidualDispersion
Integer32,
jnxPMCurMaxResidualDispersion
Integer32,
jnxPMCurAvgResidualDispersion
Integer32,
jnxPMCurLevelHistogram
Integer32,
jnxPMCurMinLevelHistogram
Integer32,
jnxPMCurMaxLevelHistogram
Integer32,
jnxPMCurAvgLevelHistogram
Integer32,
jnxPMCurLaserFrequencyError
Integer32,
jnxPMCurMinLaserFrequencyError
Integer32,
jnxPMCurMaxLaserFrequencyError
Integer32,
jnxPMCurAvgLaserFrequencyError
Integer32,
jnxPMCurFECCorrectedErrorsMantissa
Integer32,
jnxPMCurFECCorrectedErrorsExponent
Integer32,
jnxPMCurMinFECCorrectedErrorsMantissa
Integer32,
jnxPMCurMinFECCorrectedErrorsExponent
Integer32,
jnxPMCurMaxFECCorrectedErrorsMantissa
Integer32,
jnxPMCurMaxFECCorrectedErrorsExponent
Integer32,
jnxPMCurAvgFECCorrectedErrorsMantissa
Integer32,
jnxPMCurAvgFECCorrectedErrorsExponent
Integer32,
jnxPMCurFECUCorrectedWordsMantissa
Integer32,
jnxPMCurFECUCorrectedWordsExponent
Integer32,
jnxPMCurMinFECUCorrectedWordsMantissa
Integer32,
jnxPMCurMinFECUCorrectedWordsExponent
Integer32,
jnxPMCurMaxFECUCorrectedWordsMantissa
Integer32,
jnxPMCurMaxFECUCorrectedWordsExponent
Integer32,
jnxPMCurAvgFECUCorrectedWordsMantissa
Integer32,
jnxPMCurAvgFECUCorrectedWordsExponent
Integer32
}
jnxPMCurChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 1 }
jnxPMCurDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay "
::= { jnxOpticsPMCurrentEntry 2 }
jnxPMCurPolarizationState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Polarization state "
::= { jnxOpticsPMCurrentEntry 3 }
jnxPMCurPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPs"
::= { jnxOpticsPMCurrentEntry 4 }
jnxPMCurQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 5 }
jnxPMCurSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 6 }
jnxPMCurTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 7 }
jnxPMCurRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 8 }
jnxPMCurMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 9 }
jnxPMCurMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 10 }
jnxPMCurAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxOpticsPMCurrentEntry 11 }
jnxPMCurMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Differential group delay "
::= { jnxOpticsPMCurrentEntry 12 }
jnxPMCurMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Differential group delay "
::= { jnxOpticsPMCurrentEntry 13 }
jnxPMCurAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Differential group delay "
::= { jnxOpticsPMCurrentEntry 14 }
jnxPMCurMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Polarization state "
::= { jnxOpticsPMCurrentEntry 15 }
jnxPMCurMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Polarization state "
::= { jnxOpticsPMCurrentEntry 16 }
jnxPMCurAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg Polarization state "
::= { jnxOpticsPMCurrentEntry 17 }
jnxPMCurMinPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 18 }
jnxPMCurMaxPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 19 }
jnxPMCurAvgPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg - The polarisation dependent loss (PDL)"
::= { jnxOpticsPMCurrentEntry 20 }
jnxPMCurMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 21 }
jnxPMCurMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 22 }
jnxPMCurAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg 'Q' factor estimated at Rx Transceiver port "
::= { jnxOpticsPMCurrentEntry 23 }
jnxPMCurMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 24 }
jnxPMCurMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 25 }
jnxPMCurAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg SNR - signal to noise ratio"
::= { jnxOpticsPMCurrentEntry 26 }
jnxPMCurMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 27 }
jnxPMCurMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 28 }
jnxPMCurAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg TxOutputPower - transmit output power "
::= { jnxOpticsPMCurrentEntry 29 }
jnxPMCurMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 30 }
jnxPMCurMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 31 }
jnxPMCurAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg RxInputPower - receive output power"
::= { jnxOpticsPMCurrentEntry 32 }
jnxPMCurSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMCurrentEntry 33 }
jnxPMCurSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsPMCurrentEntry 34 }
jnxPMCurTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 35 }
jnxPMCurMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 36 }
jnxPMCurMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 37 }
jnxPMCurAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 38 }
jnxPMCurTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 39 }
jnxPMCurMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 40 }
jnxPMCurMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMCurrentEntry 41 }
jnxPMCurAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMCurrentEntry 42 }
jnxPMCurCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 43 }
jnxPMCurMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 44 }
jnxPMCurMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 45 }
jnxPMCurAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 46 }
jnxPMCurRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 47 }
jnxPMCurMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 48 }
jnxPMCurMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 49 }
jnxPMCurAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 50 }
jnxPMCurTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received TecCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 51 }
jnxPMCurMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 52 }
jnxPMCurMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 53 }
jnxPMCurAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 54 }
jnxPMCurResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMCurrentEntry 55 }
jnxPMCurMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMCurrentEntry 56 }
jnxPMCurMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMCurrentEntry 57 }
jnxPMCurAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMCurrentEntry 58 }
jnxPMCurLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of measured signal at Transceiver port"
::= { jnxOpticsPMCurrentEntry 59 }
jnxPMCurMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver port"
::= { jnxOpticsPMCurrentEntry 60 }
jnxPMCurMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver port"
::= { jnxOpticsPMCurrentEntry 61 }
jnxPMCurAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver port"
::= { jnxOpticsPMCurrentEntry 62 }
jnxPMCurLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 63 }
jnxPMCurMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 64 }
jnxPMCurMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 65 }
jnxPMCurAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMCurrentEntry 66 }
jnxPMCurFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 67 }
jnxPMCurFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 68 }
jnxPMCurMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 69 }
jnxPMCurMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 70 }
jnxPMCurMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 71 }
jnxPMCurMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 72 }
jnxPMCurAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 73 }
jnxPMCurAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 74 }
jnxPMCurFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 75 }
jnxPMCurFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 76 }
jnxPMCurMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 77 }
jnxPMCurMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 78 }
jnxPMCurMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 79 }
jnxPMCurMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 80 }
jnxPMCurAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 81 }
jnxPMCurAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxOpticsPMCurrentEntry 82 }
--
-- PM Interval Table
--
jnxOpticsPMIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 2 }
jnxOpticsPMIntervalEntry OBJECT-TYPE
SYNTAX JnxOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Interval
Table."
INDEX { ifIndex, jnxOpticsPMIntervalNumber }
::= { jnxOpticsPMIntervalTable 1 }
JnxOpticsPMIntervalEntry ::= SEQUENCE {
jnxOpticsPMIntervalNumber
Unsigned32,
jnxPMIntMinChromaticDispersion
Integer32,
jnxPMIntMaxChromaticDispersion
Integer32,
jnxPMIntAvgChromaticDispersion
Integer32,
jnxPMIntMinDiffGroupDelay
Integer32,
jnxPMIntMaxDiffGroupDelay
Integer32,
jnxPMIntAvgDiffGroupDelay
Integer32,
jnxPMIntMinPolarState
Integer32,
jnxPMIntMaxPolarState
Integer32,
jnxPMIntAvgPolarState
Integer32,
jnxPMIntMinPolarDependentLoss
Integer32,
jnxPMIntMaxPolarDependentLoss
Integer32,
jnxPMIntAvgPolarDependentLoss
Integer32,
jnxPMIntMinQ
Integer32,
jnxPMIntMaxQ
Integer32,
jnxPMIntAvgQ
Integer32,
jnxPMIntMinSNR
Integer32,
jnxPMIntMaxSNR
Integer32,
jnxPMIntAvgSNR
Integer32,
jnxPMIntMinTxOutputPower
Integer32,
jnxPMIntMaxTxOutputPower
Integer32,
jnxPMIntAvgTxOutputPower
Integer32,
jnxPMIntMinRxInputPower
Integer32,
jnxPMIntMaxRxInputPower
Integer32,
jnxPMIntAvgRxInputPower
Integer32,
jnxPMIntTimeStamp
DateAndTime,
jnxPMIntSuspectedFlag
TruthValue,
jnxPMIntSuspectReason
Integer32,
jnxPMIntMinTxLaserBiasCurrent
Integer32,
jnxPMIntMaxTxLaserBiasCurrent
Integer32,
jnxPMIntAvgTxLaserBiasCurrent
Integer32,
jnxPMIntMinTemperature
Integer32,
jnxPMIntMaxTemperature
Integer32,
jnxPMIntAvgTemperature
Integer32,
jnxPMIntMinCarFreqOffset
Integer32,
jnxPMIntMaxCarFreqOffset
Integer32,
jnxPMIntAvgCarFreqOffset
Integer32,
jnxPMIntMinRxLaserBiasCurrent
Integer32,
jnxPMIntMaxRxLaserBiasCurrent
Integer32,
jnxPMIntAvgRxLaserBiasCurrent
Integer32,
jnxPMIntMinTecCurrent
Integer32,
jnxPMIntMaxTecCurrent
Integer32,
jnxPMIntAvgTecCurrent
Integer32,
jnxPMIntMinResidualDispersion
Integer32,
jnxPMIntMaxResidualDispersion
Integer32,
jnxPMIntAvgResidualDispersion
Integer32,
jnxPMIntMinLevelHistogram
Integer32,
jnxPMIntMaxLevelHistogram
Integer32,
jnxPMIntAvgLevelHistogram
Integer32,
jnxPMIntMinLaserFrequencyError
Integer32,
jnxPMIntMaxLaserFrequencyError
Integer32,
jnxPMIntAvgLaserFrequencyError
Integer32,
jnxPMIntMinFECCorrectedErrorsMantissa
Integer32,
jnxPMIntMinFECCorrectedErrorsExponent
Integer32,
jnxPMIntMaxFECCorrectedErrorsMantissa
Integer32,
jnxPMIntMaxFECCorrectedErrorsExponent
Integer32,
jnxPMIntAvgFECCorrectedErrorsMantissa
Integer32,
jnxPMIntAvgFECCorrectedErrorsExponent
Integer32,
jnxPMIntMinFECUCorrectedWordsMantissa
Integer32,
jnxPMIntMinFECUCorrectedWordsExponent
Integer32,
jnxPMIntMaxFECUCorrectedWordsMantissa
Integer32,
jnxPMIntMaxFECUCorrectedWordsExponent
Integer32,
jnxPMIntAvgFECUCorrectedWordsMantissa
Integer32,
jnxPMIntAvgFECUCorrectedWordsExponent
Integer32
}
jnxOpticsPMIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the 15 mintute interavl number."
::= { jnxOpticsPMIntervalEntry 1 }
jnxPMIntMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 2 }
jnxPMIntMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 3 }
jnxPMIntAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 4 }
jnxPMIntMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 5 }
jnxPMIntMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 6 }
jnxPMIntAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 7 }
jnxPMIntMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 8 }
jnxPMIntMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 9 }
jnxPMIntAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 10 }
jnxPMIntMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 11 }
jnxPMIntMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 12 }
jnxPMIntAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the 15 minute
interval"
::= { jnxOpticsPMIntervalEntry 13 }
jnxPMIntMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 14 }
jnxPMIntMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 15 }
jnxPMIntAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 16 }
jnxPMIntMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 17 }
jnxPMIntMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 18 }
jnxPMIntAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 19 }
jnxPMIntMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 20 }
jnxPMIntMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 21 }
jnxPMIntAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 22 }
jnxPMIntMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 23}
jnxPMIntMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 24 }
jnxPMIntAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 25 }
jnxPMIntTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp PM interval"
::= { jnxOpticsPMIntervalEntry 26 }
jnxPMIntSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMIntervalEntry 27 }
jnxPMIntSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsPMIntervalEntry 28 }
jnxPMIntMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 29 }
jnxPMIntMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 30 }
jnxPMIntAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 31 }
jnxPMIntMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 32 }
jnxPMIntMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMIntervalEntry 33 }
jnxPMIntAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMIntervalEntry 34 }
jnxPMIntMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 35 }
jnxPMIntMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 36 }
jnxPMIntAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 37 }
jnxPMIntMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 38 }
jnxPMIntMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 39 }
jnxPMIntAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Average LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMIntervalEntry 40 }
jnxPMIntMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 41 }
jnxPMIntMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 42 }
jnxPMIntAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 43 }
jnxPMIntMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 44 }
jnxPMIntMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 45 }
jnxPMIntAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 46 }
jnxPMIntMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 47 }
jnxPMIntMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 48 }
jnxPMIntAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 49 }
jnxPMIntMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 50 }
jnxPMIntMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 51 }
jnxPMIntAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 52 }
jnxPMIntMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 53 }
jnxPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 54 }
jnxPMIntMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 55 }
jnxPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 56 }
jnxPMIntAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 57 }
jnxPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 58 }
jnxPMIntMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 59 }
jnxPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 60 }
jnxPMIntMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 61 }
jnxPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 62 }
jnxPMIntAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 63 }
jnxPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxOpticsPMIntervalEntry 64 }
--
-- Cur/Prev Day Table
--
jnxOpticsPMDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM Day entries."
::= { jnxOpticsPerformanceMonitoring 3 }
jnxOpticsPMDayEntry OBJECT-TYPE
SYNTAX JnxOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Day
Table"
INDEX { ifIndex, jnxOpticsPMDayIndex }
::= { jnxOpticsPMDayTable 1 }
JnxOpticsPMDayEntry ::= SEQUENCE {
jnxOpticsPMDayIndex
Unsigned32,
jnxPMDayMinChromaticDispersion
Integer32,
jnxPMDayMaxChromaticDispersion
Integer32,
jnxPMDayAvgChromaticDispersion
Integer32,
jnxPMDayMinDiffGroupDelay
Integer32,
jnxPMDayMaxDiffGroupDelay
Integer32,
jnxPMDayAvgDiffGroupDelay
Integer32,
jnxPMDayMinPolarState
Integer32,
jnxPMDayMaxPolarState
Integer32,
jnxPMDayAvgPolarState
Integer32,
jnxPMDayMinPolarDependentLoss
Integer32,
jnxPMDayMaxPolarDependentLoss
Integer32,
jnxPMDayAvgPolarDependentLoss
Integer32,
jnxPMDayMinQ
Integer32,
jnxPMDayMaxQ
Integer32,
jnxPMDayAvgQ
Integer32,
jnxPMDayMinSNR
Integer32,
jnxPMDayMaxSNR
Integer32,
jnxPMDayAvgSNR
Integer32,
jnxPMDayMinTxOutputPower
Integer32,
jnxPMDayMaxTxOutputPower
Integer32,
jnxPMDayAvgTxOutputPower
Integer32,
jnxPMDayMinRxInputPower
Integer32,
jnxPMDayMaxRxInputPower
Integer32,
jnxPMDayAvgRxInputPower
Integer32,
jnxPMDayTimeStamp
DateAndTime,
jnxPMDaySuspectedFlag
TruthValue,
jnxPMDaySuspectReason
Integer32,
jnxPMDayMinTxLaserBiasCurrent
Integer32,
jnxPMDayMaxTxLaserBiasCurrent
Integer32,
jnxPMDayAvgTxLaserBiasCurrent
Integer32,
jnxPMDayMinTemperature
Integer32,
jnxPMDayMaxTemperature
Integer32,
jnxPMDayAvgTemperature
Integer32,
jnxPMDayMinCarFreqOffset
Integer32,
jnxPMDayMaxCarFreqOffset
Integer32,
jnxPMDayAvgCarFreqOffset
Integer32,
jnxPMDayMinRxLaserBiasCurrent
Integer32,
jnxPMDayMaxRxLaserBiasCurrent
Integer32,
jnxPMDayAvgRxLaserBiasCurrent
Integer32,
jnxPMDayMinTecCurrent
Integer32,
jnxPMDayMaxTecCurrent
Integer32,
jnxPMDayAvgTecCurrent
Integer32,
jnxPMDayMinResidualDispersion
Integer32,
jnxPMDayMaxResidualDispersion
Integer32,
jnxPMDayAvgResidualDispersion
Integer32,
jnxPMDayMinLevelHistogram
Integer32,
jnxPMDayMaxLevelHistogram
Integer32,
jnxPMDayAvgLevelHistogram
Integer32,
jnxPMDayMinLaserFrequencyError
Integer32,
jnxPMDayMaxLaserFrequencyError
Integer32,
jnxPMDayAvgLaserFrequencyError
Integer32,
jnxPMDayMinFECCorrectedErrorsMantissa
Integer32,
jnxPMDayMinFECCorrectedErrorsExponent
Integer32,
jnxPMDayMaxFECCorrectedErrorsMantissa
Integer32,
jnxPMDayMaxFECCorrectedErrorsExponent
Integer32,
jnxPMDayAvgFECCorrectedErrorsMantissa
Integer32,
jnxPMDayAvgFECCorrectedErrorsExponent
Integer32,
jnxPMDayMinFECUCorrectedWordsMantissa
Integer32,
jnxPMDayMinFECUCorrectedWordsExponent
Integer32,
jnxPMDayMaxFECUCorrectedWordsMantissa
Integer32,
jnxPMDayMaxFECUCorrectedWordsExponent
Integer32,
jnxPMDayAvgFECUCorrectedWordsMantissa
Integer32,
jnxPMDayAvgFECUCorrectedWordsExponent
Integer32
}
jnxOpticsPMDayIndex OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is 1 - cur day/ 2 - prev day "
::= { jnxOpticsPMDayEntry 1 }
jnxPMDayMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the day"
::= { jnxOpticsPMDayEntry 2 }
jnxPMDayMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the day"
::= { jnxOpticsPMDayEntry 3 }
jnxPMDayAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the day"
::= { jnxOpticsPMDayEntry 4 }
jnxPMDayMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- min in the day"
::= { jnxOpticsPMDayEntry 5 }
jnxPMDayMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- max in the day"
::= { jnxOpticsPMDayEntry 6 }
jnxPMDayAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- average in the day"
::= { jnxOpticsPMDayEntry 7 }
jnxPMDayMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the day"
::= { jnxOpticsPMDayEntry 8 }
jnxPMDayMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the day"
::= { jnxOpticsPMDayEntry 9 }
jnxPMDayAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the day"
::= { jnxOpticsPMDayEntry 10 }
jnxPMDayMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the day"
::= { jnxOpticsPMDayEntry 11 }
jnxPMDayMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the day"
::= { jnxOpticsPMDayEntry 12 }
jnxPMDayAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the day
interval"
::= { jnxOpticsPMDayEntry 13 }
jnxPMDayMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the day"
::= { jnxOpticsPMDayEntry 14 }
jnxPMDayMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the day"
::= { jnxOpticsPMDayEntry 15 }
jnxPMDayAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the day"
::= { jnxOpticsPMDayEntry 16 }
jnxPMDayMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the day"
::= { jnxOpticsPMDayEntry 17 }
jnxPMDayMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the day"
::= { jnxOpticsPMDayEntry 18 }
jnxPMDayAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the day"
::= { jnxOpticsPMDayEntry 19 }
jnxPMDayMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the day"
::= { jnxOpticsPMDayEntry 20 }
jnxPMDayMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the day."
::= { jnxOpticsPMDayEntry 21 }
jnxPMDayAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the day."
::= { jnxOpticsPMDayEntry 22 }
jnxPMDayMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the day."
::= { jnxOpticsPMDayEntry 23}
jnxPMDayMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the day."
::= { jnxOpticsPMDayEntry 24 }
jnxPMDayAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the day."
::= { jnxOpticsPMDayEntry 25 }
jnxPMDayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time for the Day."
::= { jnxOpticsPMDayEntry 26 }
jnxPMDaySuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsPMDayEntry 27 }
jnxPMDaySuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - partial data
7 - one or more intervals are invaild
"
::= { jnxOpticsPMDayEntry 28 }
jnxPMDayMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 29 }
jnxPMDayMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 30 }
jnxPMDayAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 31 }
jnxPMDayMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxOpticsPMDayEntry 32 }
jnxPMDayMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxOpticsPMDayEntry 33 }
jnxPMDayAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxOpticsPMDayEntry 34 }
jnxPMDayMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 35 }
jnxPMDayMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 36 }
jnxPMDayAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxOpticsPMDayEntry 37 }
jnxPMDayMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 38 }
jnxPMDayMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 39 }
jnxPMDayAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxOpticsPMDayEntry 40 }
jnxPMDayMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 41 }
jnxPMDayMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 42 }
jnxPMDayAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 43 }
jnxPMDayMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 44 }
jnxPMDayMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 45 }
jnxPMDayAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port"
::= { jnxOpticsPMDayEntry 46 }
jnxPMDayMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver port"
::= { jnxOpticsPMDayEntry 47 }
jnxPMDayMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver port"
::= { jnxOpticsPMDayEntry 48 }
jnxPMDayAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver port"
::= { jnxOpticsPMDayEntry 49 }
jnxPMDayMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMDayEntry 50 }
jnxPMDayMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMDayEntry 51 }
jnxPMDayAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver port"
::= { jnxOpticsPMDayEntry 52 }
jnxPMDayMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 53 }
jnxPMDayMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 54 }
jnxPMDayMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 55 }
jnxPMDayMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 56 }
jnxPMDayAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 57 }
jnxPMDayAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxOpticsPMDayEntry 58 }
jnxPMDayMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 59 }
jnxPMDayMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 60 }
jnxPMDayMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 61 }
jnxPMDayMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 62 }
jnxPMDayAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 63 }
jnxPMDayAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxOpticsPMDayEntry 64 }
--
-- Optical PM data
--
jnxIfOpticsPMCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 9 }
jnxIfOpticsPMCurrentEntry OBJECT-TYPE
SYNTAX JnxIfOpticsPMCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Current
Table."
INDEX { ifIndex, jnxIfOpticsPMCurrentLaneIndex }
::= { jnxIfOpticsPMCurrentTable 1 }
JnxIfOpticsPMCurrentEntry ::= SEQUENCE {
jnxIfOpticsPMCurrentLaneIndex
Unsigned32,
jnxIfOpticsPMCurChromaticDispersion
Integer32,
jnxIfOpticsPMCurDiffGroupDelay
Integer32,
jnxIfOpticsPMCurPolarizationState
Integer32,
jnxIfOpticsPMCurPolarDepLoss
Integer32,
jnxIfOpticsPMCurQ
Integer32,
jnxIfOpticsPMCurSNR
Integer32,
jnxIfOpticsPMCurTxOutputPower
Integer32,
jnxIfOpticsPMCurRxInputPower
Integer32,
jnxIfOpticsPMCurMinChromaticDispersion
Integer32,
jnxIfOpticsPMCurMaxChromaticDispersion
Integer32,
jnxIfOpticsPMCurAvgChromaticDispersion
Integer32,
jnxIfOpticsPMCurMinDiffGroupDelay
Integer32,
jnxIfOpticsPMCurMaxDiffGroupDelay
Integer32,
jnxIfOpticsPMCurAvgDiffGroupDelay
Integer32,
jnxIfOpticsPMCurMinPolarState
Integer32,
jnxIfOpticsPMCurMaxPolarState
Integer32,
jnxIfOpticsPMCurAvgPolarState
Integer32,
jnxIfOpticsPMCurMinPolarDepLoss
Integer32,
jnxIfOpticsPMCurMaxPolarDepLoss
Integer32,
jnxIfOpticsPMCurAvgPolarDepLoss
Integer32,
jnxIfOpticsPMCurMinQ
Integer32,
jnxIfOpticsPMCurMaxQ
Integer32,
jnxIfOpticsPMCurAvgQ
Integer32,
jnxIfOpticsPMCurMinSNR
Integer32,
jnxIfOpticsPMCurMaxSNR
Integer32,
jnxIfOpticsPMCurAvgSNR
Integer32,
jnxIfOpticsPMCurMinTxOutputPower
Integer32,
jnxIfOpticsPMCurMaxTxOutputPower
Integer32,
jnxIfOpticsPMCurAvgTxOutputPower
Integer32,
jnxIfOpticsPMCurMinRxInputPower
Integer32,
jnxIfOpticsPMCurMaxRxInputPower
Integer32,
jnxIfOpticsPMCurAvgRxInputPower
Integer32,
jnxIfOpticsPMCurSuspectedFlag
TruthValue,
jnxIfOpticsPMCurSuspectReason
Integer32,
jnxIfOpticsPMCurTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurMinTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurMaxTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurAvgTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurTemperature
Integer32,
jnxIfOpticsPMCurMinTemperature
Integer32,
jnxIfOpticsPMCurMaxTemperature
Integer32,
jnxIfOpticsPMCurAvgTemperature
Integer32,
jnxIfOpticsPMCurCarFreqOffset
Integer32,
jnxIfOpticsPMCurMinCarFreqOffset
Integer32,
jnxIfOpticsPMCurMaxCarFreqOffset
Integer32,
jnxIfOpticsPMCurAvgCarFreqOffset
Integer32,
jnxIfOpticsPMCurRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurMinRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurMaxRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurAvgRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMCurTecCurrent
Integer32,
jnxIfOpticsPMCurMinTecCurrent
Integer32,
jnxIfOpticsPMCurMaxTecCurrent
Integer32,
jnxIfOpticsPMCurAvgTecCurrent
Integer32,
jnxIfOpticsPMCurResidualDispersion
Integer32,
jnxIfOpticsPMCurMinResidualDispersion
Integer32,
jnxIfOpticsPMCurMaxResidualDispersion
Integer32,
jnxIfOpticsPMCurAvgResidualDispersion
Integer32,
jnxIfOpticsPMCurLevelHistogram
Integer32,
jnxIfOpticsPMCurMinLevelHistogram
Integer32,
jnxIfOpticsPMCurMaxLevelHistogram
Integer32,
jnxIfOpticsPMCurAvgLevelHistogram
Integer32,
jnxIfOpticsPMCurLaserFrequencyError
Integer32,
jnxIfOpticsPMCurMinLaserFrequencyError
Integer32,
jnxIfOpticsPMCurMaxLaserFrequencyError
Integer32,
jnxIfOpticsPMCurAvgLaserFrequencyError
Integer32,
jnxIfOpticsPMCurFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMCurFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMCurMinFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMCurMinFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMCurMaxFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMCurMaxFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMCurAvgFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMCurAvgFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMCurFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMCurFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMCurMinFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMCurMinFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMCurMaxFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMCurMaxFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMCurAvgFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMCurAvgFECUCorrectedWordsExponent
Integer32
}
jnxIfOpticsPMCurrentLaneIndex OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the optics lane number."
::= { jnxIfOpticsPMCurrentEntry 1 }
jnxIfOpticsPMCurChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 2 }
jnxIfOpticsPMCurDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay "
::= { jnxIfOpticsPMCurrentEntry 3 }
jnxIfOpticsPMCurPolarizationState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Polarization state "
::= { jnxIfOpticsPMCurrentEntry 4 }
jnxIfOpticsPMCurPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPs"
::= { jnxIfOpticsPMCurrentEntry 5 }
jnxIfOpticsPMCurQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'Q' factor estimated at Rx Transceiver port "
::= { jnxIfOpticsPMCurrentEntry 6 }
jnxIfOpticsPMCurSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR - signal to noise ratio"
::= { jnxIfOpticsPMCurrentEntry 7 }
jnxIfOpticsPMCurTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower - transmit output power "
::= { jnxIfOpticsPMCurrentEntry 8 }
jnxIfOpticsPMCurRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower - receive output power"
::= { jnxIfOpticsPMCurrentEntry 9 }
jnxIfOpticsPMCurMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 10 }
jnxIfOpticsPMCurMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 11 }
jnxIfOpticsPMCurAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Chromatic Dispersion measured at Rx Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 12 }
jnxIfOpticsPMCurMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Differential group delay "
::= { jnxIfOpticsPMCurrentEntry 13 }
jnxIfOpticsPMCurMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Differential group delay "
::= { jnxIfOpticsPMCurrentEntry 14 }
jnxIfOpticsPMCurAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Differential group delay "
::= { jnxIfOpticsPMCurrentEntry 15 }
jnxIfOpticsPMCurMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Polarization state "
::= { jnxIfOpticsPMCurrentEntry 16 }
jnxIfOpticsPMCurMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Polarization state "
::= { jnxIfOpticsPMCurrentEntry 17 }
jnxIfOpticsPMCurAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg Polarization state "
::= { jnxIfOpticsPMCurrentEntry 18 }
jnxIfOpticsPMCurMinPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min - The polarisation dependent loss (PDL)"
::= { jnxIfOpticsPMCurrentEntry 19 }
jnxIfOpticsPMCurMaxPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max - The polarisation dependent loss (PDL)"
::= { jnxIfOpticsPMCurrentEntry 20 }
jnxIfOpticsPMCurAvgPolarDepLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg - The polarisation dependent loss (PDL)"
::= { jnxIfOpticsPMCurrentEntry 21 }
jnxIfOpticsPMCurMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min 'Q' factor estimated at Rx Transceiver port "
::= { jnxIfOpticsPMCurrentEntry 22 }
jnxIfOpticsPMCurMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max 'Q' factor estimated at Rx Transceiver port "
::= { jnxIfOpticsPMCurrentEntry 23 }
jnxIfOpticsPMCurAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg 'Q' factor estimated at Rx Transceiver port "
::= { jnxIfOpticsPMCurrentEntry 24 }
jnxIfOpticsPMCurMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min SNR - signal to noise ratio"
::= { jnxIfOpticsPMCurrentEntry 25 }
jnxIfOpticsPMCurMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max SNR - signal to noise ratio"
::= { jnxIfOpticsPMCurrentEntry 26 }
jnxIfOpticsPMCurAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg SNR - signal to noise ratio"
::= { jnxIfOpticsPMCurrentEntry 27 }
jnxIfOpticsPMCurMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min TxOutputPower - transmit output power "
::= { jnxIfOpticsPMCurrentEntry 28 }
jnxIfOpticsPMCurMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max TxOutputPower - transmit output power "
::= { jnxIfOpticsPMCurrentEntry 29 }
jnxIfOpticsPMCurAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg TxOutputPower - transmit output power "
::= { jnxIfOpticsPMCurrentEntry 30 }
jnxIfOpticsPMCurMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min RxInputPower - receive output power"
::= { jnxIfOpticsPMCurrentEntry 31 }
jnxIfOpticsPMCurMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max RxInputPower - receive output power"
::= { jnxIfOpticsPMCurrentEntry 32 }
jnxIfOpticsPMCurAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Avg RxInputPower - receive output power"
::= { jnxIfOpticsPMCurrentEntry 33 }
jnxIfOpticsPMCurSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxIfOpticsPMCurrentEntry 34 }
jnxIfOpticsPMCurSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxIfOpticsPMCurrentEntry 35 }
jnxIfOpticsPMCurTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 36 }
jnxIfOpticsPMCurMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 37 }
jnxIfOpticsPMCurMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum trasmit LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 38 }
jnxIfOpticsPMCurAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 39 }
jnxIfOpticsPMCurTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 40 }
jnxIfOpticsPMCurMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 41 }
jnxIfOpticsPMCurMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 42 }
jnxIfOpticsPMCurAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 43 }
jnxIfOpticsPMCurCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 44 }
jnxIfOpticsPMCurMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 45 }
jnxIfOpticsPMCurMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 46 }
jnxIfOpticsPMCurAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 47 }
jnxIfOpticsPMCurRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 48 }
jnxIfOpticsPMCurMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 49 }
jnxIfOpticsPMCurMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 50 }
jnxIfOpticsPMCurAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 51 }
jnxIfOpticsPMCurTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received TecCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 52 }
jnxIfOpticsPMCurMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 53 }
jnxIfOpticsPMCurMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 54 }
jnxIfOpticsPMCurAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 55 }
jnxIfOpticsPMCurResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 56 }
jnxIfOpticsPMCurMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 57 }
jnxIfOpticsPMCurMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 58 }
jnxIfOpticsPMCurAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMCurrentEntry 59 }
jnxIfOpticsPMCurLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 60 }
jnxIfOpticsPMCurMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 61 }
jnxIfOpticsPMCurMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 62 }
jnxIfOpticsPMCurAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 63 }
jnxIfOpticsPMCurLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 64 }
jnxIfOpticsPMCurMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 65 }
jnxIfOpticsPMCurMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 66 }
jnxIfOpticsPMCurAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMCurrentEntry 67 }
jnxIfOpticsPMCurFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 68 }
jnxIfOpticsPMCurFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 69 }
jnxIfOpticsPMCurMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 70 }
jnxIfOpticsPMCurMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 71 }
jnxIfOpticsPMCurMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 72 }
jnxIfOpticsPMCurMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 73 }
jnxIfOpticsPMCurAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 74 }
jnxIfOpticsPMCurAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 75 }
jnxIfOpticsPMCurFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 76 }
jnxIfOpticsPMCurFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 77 }
jnxIfOpticsPMCurMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 78 }
jnxIfOpticsPMCurMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 79 }
jnxIfOpticsPMCurMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 80 }
jnxIfOpticsPMCurMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 81 }
jnxIfOpticsPMCurAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 82 }
jnxIfOpticsPMCurAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMCurrentEntry 83 }
--
-- PM Interval Table
--
jnxIfOpticsPMIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 10 }
jnxIfOpticsPMIntervalEntry OBJECT-TYPE
SYNTAX JnxIfOpticsPMIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Interval
Table."
INDEX { ifIndex, jnxIfOpticsPMIntervalLaneIndex, jnxIfOpticsPMIntervalNumber }
::= { jnxIfOpticsPMIntervalTable 1 }
JnxIfOpticsPMIntervalEntry ::= SEQUENCE {
jnxIfOpticsPMIntervalLaneIndex
Unsigned32,
jnxIfOpticsPMIntervalNumber
Unsigned32,
jnxIfOpticsPMIntMinChromaticDispersion
Integer32,
jnxIfOpticsPMIntMaxChromaticDispersion
Integer32,
jnxIfOpticsPMIntAvgChromaticDispersion
Integer32,
jnxIfOpticsPMIntMinDiffGroupDelay
Integer32,
jnxIfOpticsPMIntMaxDiffGroupDelay
Integer32,
jnxIfOpticsPMIntAvgDiffGroupDelay
Integer32,
jnxIfOpticsPMIntMinPolarState
Integer32,
jnxIfOpticsPMIntMaxPolarState
Integer32,
jnxIfOpticsPMIntAvgPolarState
Integer32,
jnxIfOpticsPMIntMinPolarDependentLoss
Integer32,
jnxIfOpticsPMIntMaxPolarDependentLoss
Integer32,
jnxIfOpticsPMIntAvgPolarDependentLoss
Integer32,
jnxIfOpticsPMIntMinQ
Integer32,
jnxIfOpticsPMIntMaxQ
Integer32,
jnxIfOpticsPMIntAvgQ
Integer32,
jnxIfOpticsPMIntMinSNR
Integer32,
jnxIfOpticsPMIntMaxSNR
Integer32,
jnxIfOpticsPMIntAvgSNR
Integer32,
jnxIfOpticsPMIntMinTxOutputPower
Integer32,
jnxIfOpticsPMIntMaxTxOutputPower
Integer32,
jnxIfOpticsPMIntAvgTxOutputPower
Integer32,
jnxIfOpticsPMIntMinRxInputPower
Integer32,
jnxIfOpticsPMIntMaxRxInputPower
Integer32,
jnxIfOpticsPMIntAvgRxInputPower
Integer32,
jnxIfOpticsPMIntTimeStamp
DateAndTime,
jnxIfOpticsPMIntSuspectedFlag
TruthValue,
jnxIfOpticsPMIntSuspectReason
Integer32,
jnxIfOpticsPMIntMinTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntMaxTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntAvgTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntMinTemperature
Integer32,
jnxIfOpticsPMIntMaxTemperature
Integer32,
jnxIfOpticsPMIntAvgTemperature
Integer32,
jnxIfOpticsPMIntMinCarFreqOffset
Integer32,
jnxIfOpticsPMIntMaxCarFreqOffset
Integer32,
jnxIfOpticsPMIntAvgCarFreqOffset
Integer32,
jnxIfOpticsPMIntMinRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntMaxRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntAvgRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMIntMinTecCurrent
Integer32,
jnxIfOpticsPMIntMaxTecCurrent
Integer32,
jnxIfOpticsPMIntAvgTecCurrent
Integer32,
jnxIfOpticsPMIntMinResidualDispersion
Integer32,
jnxIfOpticsPMIntMaxResidualDispersion
Integer32,
jnxIfOpticsPMIntAvgResidualDispersion
Integer32,
jnxIfOpticsPMIntMinLevelHistogram
Integer32,
jnxIfOpticsPMIntMaxLevelHistogram
Integer32,
jnxIfOpticsPMIntAvgLevelHistogram
Integer32,
jnxIfOpticsPMIntMinLaserFrequencyError
Integer32,
jnxIfOpticsPMIntMaxLaserFrequencyError
Integer32,
jnxIfOpticsPMIntAvgLaserFrequencyError
Integer32,
jnxIfOpticsPMIntMinFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMIntMinFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMIntMaxFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMIntMaxFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMIntAvgFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMIntAvgFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMIntMinFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMIntMinFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMIntMaxFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMIntMaxFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMIntAvgFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMIntAvgFECUCorrectedWordsExponent
Integer32
}
jnxIfOpticsPMIntervalLaneIndex OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the optics lane number."
::= { jnxIfOpticsPMIntervalEntry 1 }
jnxIfOpticsPMIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the 15 mintute interavl number."
::= { jnxIfOpticsPMIntervalEntry 2 }
jnxIfOpticsPMIntMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 3 }
jnxIfOpticsPMIntMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 4 }
jnxIfOpticsPMIntAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 5 }
jnxIfOpticsPMIntMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 6 }
jnxIfOpticsPMIntMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 7 }
jnxIfOpticsPMIntAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential group delay measured at Rx Transceiver
port -- average in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 8 }
jnxIfOpticsPMIntMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 9 }
jnxIfOpticsPMIntMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 10 }
jnxIfOpticsPMIntAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 11 }
jnxIfOpticsPMIntMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 12 }
jnxIfOpticsPMIntMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 13 }
jnxIfOpticsPMIntAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the 15 minute
interval"
::= { jnxIfOpticsPMIntervalEntry 14 }
jnxIfOpticsPMIntMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 15 }
jnxIfOpticsPMIntMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 16 }
jnxIfOpticsPMIntAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 17 }
jnxIfOpticsPMIntMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 18 }
jnxIfOpticsPMIntMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 19 }
jnxIfOpticsPMIntAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 20 }
jnxIfOpticsPMIntMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 21 }
jnxIfOpticsPMIntMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 22 }
jnxIfOpticsPMIntAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 23 }
jnxIfOpticsPMIntMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 24 }
jnxIfOpticsPMIntMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 25 }
jnxIfOpticsPMIntAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 26 }
jnxIfOpticsPMIntTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp PM interval"
::= { jnxIfOpticsPMIntervalEntry 27 }
jnxIfOpticsPMIntSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxIfOpticsPMIntervalEntry 28 }
jnxIfOpticsPMIntSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxIfOpticsPMIntervalEntry 29 }
jnxIfOpticsPMIntMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 30 }
jnxIfOpticsPMIntMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 31 }
jnxIfOpticsPMIntAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Average LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 32 }
jnxIfOpticsPMIntMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 33 }
jnxIfOpticsPMIntMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 34 }
jnxIfOpticsPMIntAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 35 }
jnxIfOpticsPMIntMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 36 }
jnxIfOpticsPMIntMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 37 }
jnxIfOpticsPMIntAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 38 }
jnxIfOpticsPMIntMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 39 }
jnxIfOpticsPMIntMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 40 }
jnxIfOpticsPMIntAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Average LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMIntervalEntry 41 }
jnxIfOpticsPMIntMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 42 }
jnxIfOpticsPMIntMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 43 }
jnxIfOpticsPMIntAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 44 }
jnxIfOpticsPMIntMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 45 }
jnxIfOpticsPMIntMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 46 }
jnxIfOpticsPMIntAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 47 }
jnxIfOpticsPMIntMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 48 }
jnxIfOpticsPMIntMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 49 }
jnxIfOpticsPMIntAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 50 }
jnxIfOpticsPMIntMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 51 }
jnxIfOpticsPMIntMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 52 }
jnxIfOpticsPMIntAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver
port -- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 53 }
jnxIfOpticsPMIntMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 54 }
jnxIfOpticsPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 55 }
jnxIfOpticsPMIntMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 56 }
jnxIfOpticsPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 57 }
jnxIfOpticsPMIntAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 58 }
jnxIfOpticsPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 59 }
jnxIfOpticsPMIntMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 60 }
jnxIfOpticsPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 61 }
jnxIfOpticsPMIntMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 62 }
jnxIfOpticsPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 63 }
jnxIfOpticsPMIntAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 64 }
jnxIfOpticsPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset
-- min in the 15 minute interval"
::= { jnxIfOpticsPMIntervalEntry 65 }
--
-- Cur/Prev Day Table
--
jnxIfOpticsPMDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM Day entries."
::= { jnxOpticsPerformanceMonitoring 11 }
jnxIfOpticsPMDayEntry OBJECT-TYPE
SYNTAX JnxIfOpticsPMDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the PM Day
Table"
INDEX { ifIndex, jnxIfOpticsPMDayLaneIndex, jnxIfOpticsPMDayIndex }
::= { jnxIfOpticsPMDayTable 1 }
JnxIfOpticsPMDayEntry ::= SEQUENCE {
jnxIfOpticsPMDayLaneIndex
Unsigned32,
jnxIfOpticsPMDayIndex
Unsigned32,
jnxIfOpticsPMDayMinChromaticDispersion
Integer32,
jnxIfOpticsPMDayMaxChromaticDispersion
Integer32,
jnxIfOpticsPMDayAvgChromaticDispersion
Integer32,
jnxIfOpticsPMDayMinDiffGroupDelay
Integer32,
jnxIfOpticsPMDayMaxDiffGroupDelay
Integer32,
jnxIfOpticsPMDayAvgDiffGroupDelay
Integer32,
jnxIfOpticsPMDayMinPolarState
Integer32,
jnxIfOpticsPMDayMaxPolarState
Integer32,
jnxIfOpticsPMDayAvgPolarState
Integer32,
jnxIfOpticsPMDayMinPolarDependentLoss
Integer32,
jnxIfOpticsPMDayMaxPolarDependentLoss
Integer32,
jnxIfOpticsPMDayAvgPolarDependentLoss
Integer32,
jnxIfOpticsPMDayMinQ
Integer32,
jnxIfOpticsPMDayMaxQ
Integer32,
jnxIfOpticsPMDayAvgQ
Integer32,
jnxIfOpticsPMDayMinSNR
Integer32,
jnxIfOpticsPMDayMaxSNR
Integer32,
jnxIfOpticsPMDayAvgSNR
Integer32,
jnxIfOpticsPMDayMinTxOutputPower
Integer32,
jnxIfOpticsPMDayMaxTxOutputPower
Integer32,
jnxIfOpticsPMDayAvgTxOutputPower
Integer32,
jnxIfOpticsPMDayMinRxInputPower
Integer32,
jnxIfOpticsPMDayMaxRxInputPower
Integer32,
jnxIfOpticsPMDayAvgRxInputPower
Integer32,
jnxIfOpticsPMDayTimeStamp
DateAndTime,
jnxIfOpticsPMDaySuspectedFlag
TruthValue,
jnxIfOpticsPMDaySuspectReason
Integer32,
jnxIfOpticsPMDayMinTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayMaxTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayAvgTxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayMinTemperature
Integer32,
jnxIfOpticsPMDayMaxTemperature
Integer32,
jnxIfOpticsPMDayAvgTemperature
Integer32,
jnxIfOpticsPMDayMinCarFreqOffset
Integer32,
jnxIfOpticsPMDayMaxCarFreqOffset
Integer32,
jnxIfOpticsPMDayAvgCarFreqOffset
Integer32,
jnxIfOpticsPMDayMinRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayMaxRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayAvgRxLaserBiasCurrent
Integer32,
jnxIfOpticsPMDayMinTecCurrent
Integer32,
jnxIfOpticsPMDayMaxTecCurrent
Integer32,
jnxIfOpticsPMDayAvgTecCurrent
Integer32,
jnxIfOpticsPMDayMinResidualDispersion
Integer32,
jnxIfOpticsPMDayMaxResidualDispersion
Integer32,
jnxIfOpticsPMDayAvgResidualDispersion
Integer32,
jnxIfOpticsPMDayMinLevelHistogram
Integer32,
jnxIfOpticsPMDayMaxLevelHistogram
Integer32,
jnxIfOpticsPMDayAvgLevelHistogram
Integer32,
jnxIfOpticsPMDayMinLaserFrequencyError
Integer32,
jnxIfOpticsPMDayMaxLaserFrequencyError
Integer32,
jnxIfOpticsPMDayAvgLaserFrequencyError
Integer32,
jnxIfOpticsPMDayMinFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMDayMinFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMDayMaxFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMDayMaxFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMDayAvgFECCorrectedErrorsMantissa
Integer32,
jnxIfOpticsPMDayAvgFECCorrectedErrorsExponent
Integer32,
jnxIfOpticsPMDayMinFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMDayMinFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMDayMaxFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMDayMaxFECUCorrectedWordsExponent
Integer32,
jnxIfOpticsPMDayAvgFECUCorrectedWordsMantissa
Integer32,
jnxIfOpticsPMDayAvgFECUCorrectedWordsExponent
Integer32
}
jnxIfOpticsPMDayLaneIndex OBJECT-TYPE
SYNTAX Unsigned32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the optics lane number."
::= { jnxIfOpticsPMDayEntry 1 }
jnxIfOpticsPMDayIndex OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is 1 - cur day/ 2 - prev day "
::= { jnxIfOpticsPMDayEntry 2 }
jnxIfOpticsPMDayMinChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - min in the day"
::= { jnxIfOpticsPMDayEntry 3 }
jnxIfOpticsPMDayMaxChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - max in the day"
::= { jnxIfOpticsPMDayEntry 4 }
jnxIfOpticsPMDayAvgChromaticDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Residual Chromatic Dispersion measured at Rx Transceiver
port - average in the day"
::= { jnxIfOpticsPMDayEntry 5 }
jnxIfOpticsPMDayMinDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- min in the day"
::= { jnxIfOpticsPMDayEntry 6 }
jnxIfOpticsPMDayMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- max in the day"
::= { jnxIfOpticsPMDayEntry 7 }
jnxIfOpticsPMDayAvgDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Differential Group Delay measured at Rx Transceiver
port -- average in the day"
::= { jnxIfOpticsPMDayEntry 8 }
jnxIfOpticsPMDayMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- min in the day"
::= { jnxIfOpticsPMDayEntry 9 }
jnxIfOpticsPMDayMaxPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- max in the day"
::= { jnxIfOpticsPMDayEntry 10 }
jnxIfOpticsPMDayAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITS "rad/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization state -- average in the day"
::= { jnxIfOpticsPMDayEntry 11 }
jnxIfOpticsPMDayMinPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- min in the day"
::= { jnxIfOpticsPMDayEntry 12 }
jnxIfOpticsPMDayMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- max in the day"
::= { jnxIfOpticsPMDayEntry 13 }
jnxIfOpticsPMDayAvgPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Polarization Dependent Loss -- average in the day
interval"
::= { jnxIfOpticsPMDayEntry 14 }
jnxIfOpticsPMDayMinQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- min in the day"
::= { jnxIfOpticsPMDayEntry 15 }
jnxIfOpticsPMDayMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- max in the day"
::= { jnxIfOpticsPMDayEntry 16 }
jnxIfOpticsPMDayAvgQ OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Q -- Avg in the day"
::= { jnxIfOpticsPMDayEntry 17 }
jnxIfOpticsPMDayMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- min in the day"
::= { jnxIfOpticsPMDayEntry 18 }
jnxIfOpticsPMDayMaxSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- max in the day"
::= { jnxIfOpticsPMDayEntry 19 }
jnxIfOpticsPMDayAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR -- avg in the day"
::= { jnxIfOpticsPMDayEntry 20 }
jnxIfOpticsPMDayMinTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- min in the day"
::= { jnxIfOpticsPMDayEntry 21 }
jnxIfOpticsPMDayMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- max in the day."
::= { jnxIfOpticsPMDayEntry 22 }
jnxIfOpticsPMDayAvgTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOutputPower -- average in the day."
::= { jnxIfOpticsPMDayEntry 23 }
jnxIfOpticsPMDayMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- min in the day."
::= { jnxIfOpticsPMDayEntry 24 }
jnxIfOpticsPMDayMaxRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- max in the day."
::= { jnxIfOpticsPMDayEntry 25 }
jnxIfOpticsPMDayAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxInputPower -- average in the day."
::= { jnxIfOpticsPMDayEntry 26 }
jnxIfOpticsPMDayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time for the Day."
::= { jnxIfOpticsPMDayEntry 27 }
jnxIfOpticsPMDaySuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxIfOpticsPMDayEntry 28 }
jnxIfOpticsPMDaySuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - partial data
7 - one or more intervals are invaild
"
::= { jnxIfOpticsPMDayEntry 29 }
jnxIfOpticsPMDayMinTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 30 }
jnxIfOpticsPMDayMaxTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 31 }
jnxIfOpticsPMDayAvgTxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 32 }
jnxIfOpticsPMDayMinTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Temperature measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 33 }
jnxIfOpticsPMDayMaxTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Temperature measure at Transceiver port"
::= { jnxIfOpticsPMDayEntry 34 }
jnxIfOpticsPMDayAvgTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celcius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Temperature measure at Transceiver port"
::= { jnxIfOpticsPMDayEntry 35 }
jnxIfOpticsPMDayMinCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "Mhz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 36 }
jnxIfOpticsPMDayMaxCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 37 }
jnxIfOpticsPMDayAvgCarFreqOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Carrier frequency offset measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 38 }
jnxIfOpticsPMDayMinRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 39 }
jnxIfOpticsPMDayMaxRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Minimum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 40 }
jnxIfOpticsPMDayAvgRxLaserBiasCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Maximum LaserBiasCurrent measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 41 }
jnxIfOpticsPMDayMinTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Minimum TecCurrent measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 42 }
jnxIfOpticsPMDayMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Maximum TecCurrent measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 43 }
jnxIfOpticsPMDayAvgTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS ".1 mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average TecCurrent measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 44 }
jnxIfOpticsPMDayMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 45 }
jnxIfOpticsPMDayMaxResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 46 }
jnxIfOpticsPMDayAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Residual Dispersion measured at Transceiver
port"
::= { jnxIfOpticsPMDayEntry 47 }
jnxIfOpticsPMDayMinLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMDayEntry 48 }
jnxIfOpticsPMDayMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMDayEntry 49 }
jnxIfOpticsPMDayAvgLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average rate of measured signal at Transceiver port"
::= { jnxIfOpticsPMDayEntry 50 }
jnxIfOpticsPMDayMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 51 }
jnxIfOpticsPMDayMaxLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 52 }
jnxIfOpticsPMDayAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Laser Frequency Error measured at Transceiver port"
::= { jnxIfOpticsPMDayEntry 53 }
jnxIfOpticsPMDayMinFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 54 }
jnxIfOpticsPMDayMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 55 }
jnxIfOpticsPMDayMaxFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 56 }
jnxIfOpticsPMDayMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 57 }
jnxIfOpticsPMDayAvgFECCorrectedErrorsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 58 }
jnxIfOpticsPMDayAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Pre-FEC BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 59 }
jnxIfOpticsPMDayMinFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 60 }
jnxIfOpticsPMDayMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 61 }
jnxIfOpticsPMDayMaxFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 62 }
jnxIfOpticsPMDayMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 63 }
jnxIfOpticsPMDayAvgFECUCorrectedWordsMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 64 }
jnxIfOpticsPMDayAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Uncorrected BER since last counter reset"
::= { jnxIfOpticsPMDayEntry 65 }
--
--
-- Optics OT interface PM Config table
--
jnxOpticsOTIfPMFECConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfPMFECConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of current PM entries."
::= { jnxOpticsPerformanceMonitoring 8 }
jnxOpticsOTIfPMFECConfigEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfPMFECConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the OT interface PM Current
Table."
INDEX { ifIndex }
::= { jnxOpticsOTIfPMFECConfigTable 1 }
JnxOpticsOTIfPMFECConfigEntry ::= SEQUENCE {
jnxOpticsOTIfPMFECValidIntervals Unsigned32,
jnxOpticsOTIfPM15MinPreFECBERMantissaThreshold Unsigned32,
jnxOpticsOTIfPM15MinPreFECBERExponentThreshold Unsigned32,
jnxOpticsOTIfPM24HourPreFECBERMantissaThreshold Unsigned32,
jnxOpticsOTIfPM24HourPreFECBERExponentThreshold Unsigned32,
jnxOpticsOTIfPMFECBEREnableTCA TruthValue
}
jnxOpticsOTIfPMFECValidIntervals OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of contiguous 15 minute intervals for which valid FEC
PM data is available for the particular interface."
::= {jnxOpticsOTIfPMFECConfigEntry 1}
jnxOpticsOTIfPM15MinPreFECBERMantissaThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BER (mantissa) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxOpticsOTIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification."
::= {jnxOpticsOTIfPMFECConfigEntry 2}
jnxOpticsOTIfPM15MinPreFECBERExponentThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Pre FEC BER (exponent) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification."
::= {jnxOpticsOTIfPMFECConfigEntry 3}
jnxOpticsOTIfPM24HourPreFECBERMantissaThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BER (mantissa) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification."
::= {jnxOpticsOTIfPMFECConfigEntry 4}
jnxOpticsOTIfPM24HourPreFECBERExponentThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Pre FEC BER (exponent) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification."
::= {jnxOpticsOTIfPMFECConfigEntry 5}
jnxOpticsOTIfPMFECBEREnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable TCA's - 15minute and 24hr for FEC BER "
::= { jnxOpticsOTIfPMFECConfigEntry 6 }
--
-- OT FEC PM Current Table
--
jnxOpticsOTIfPMFECCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfPMFECCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Performance monitoring FEC Current Table."
::= { jnxOpticsPerformanceMonitoring 4 }
jnxOpticsOTIfPMFECCurrentEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfPMFECCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Near end or Far End performance
monitoring FEC current table."
INDEX {ifIndex}
::= { jnxOpticsOTIfPMFECCurrentTable 1 }
JnxOpticsOTIfPMFECCurrentEntry ::=
SEQUENCE {
jnxOpticsOTIfPMFECCurrentSuspectedFlag TruthValue,
jnxOpticsOTIfPMCurrentFECCorrectedErr Counter64,
jnxOpticsOTIfPMCurrentFECUncorrectedWords Counter64,
jnxOpticsOTIfPMCurrentFECBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentFECBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentFECMinBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentFECMinBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentFECMaxBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentFECMaxBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentFECAvgBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentFECAvgBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentFECElapsedTime Unsigned32,
jnxOpticsOTIfPMFECCurSuspectReason Integer32
}
jnxOpticsOTIfPMFECCurrentSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsOTIfPMFECCurrentEntry 1}
jnxOpticsOTIfPMCurrentFECCorrectedErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bits corrected by the FEC are counted in the
interval."
::= { jnxOpticsOTIfPMFECCurrentEntry 2}
jnxOpticsOTIfPMCurrentFECUncorrectedWords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of un-corrected words by the FEC are counted over the
interval."
::= { jnxOpticsOTIfPMFECCurrentEntry 3}
jnxOpticsOTIfPMCurrentFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa."
::= { jnxOpticsOTIfPMFECCurrentEntry 4}
jnxOpticsOTIfPMCurrentFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1)."
::= { jnxOpticsOTIfPMFECCurrentEntry 5}
jnxOpticsOTIfPMCurrentFECMinBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa."
::= { jnxOpticsOTIfPMFECCurrentEntry 6}
jnxOpticsOTIfPMCurrentFECMinBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1)."
::= { jnxOpticsOTIfPMFECCurrentEntry 7}
jnxOpticsOTIfPMCurrentFECMaxBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa."
::= { jnxOpticsOTIfPMFECCurrentEntry 8}
jnxOpticsOTIfPMCurrentFECMaxBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1)."
::= { jnxOpticsOTIfPMFECCurrentEntry 9}
jnxOpticsOTIfPMCurrentFECAvgBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa."
::= { jnxOpticsOTIfPMFECCurrentEntry 10}
jnxOpticsOTIfPMCurrentFECAvgBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1)."
::= { jnxOpticsOTIfPMFECCurrentEntry 11}
jnxOpticsOTIfPMCurrentFECElapsedTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time elapsed for this 15 minute interval."
::= { jnxOpticsOTIfPMFECCurrentEntry 12 }
jnxOpticsOTIfPMFECCurSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsOTIfPMFECCurrentEntry 13 }
--
-- FEC OT PM Interval Table
--
jnxOpticsOTIfPMFECIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfPMFECIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Performance monitoring FEC Interval Table."
::= { jnxOpticsPerformanceMonitoring 5 }
jnxOpticsOTIfPMFECIntervalEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfPMFECIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Near end or Far End performance
monitoring FEC interval table."
INDEX { ifIndex,
jnxOpticsOTIfPMFECIntervalNumber }
::= { jnxOpticsOTIfPMFECIntervalTable 1 }
JnxOpticsOTIfPMFECIntervalEntry ::=
SEQUENCE {
jnxOpticsOTIfPMFECIntervalNumber Unsigned32,
jnxOpticsOTIfPMFECIntervalSuspectedFlag TruthValue,
jnxOpticsOTIfPMIntervalFECCorrectedErr Counter64,
jnxOpticsOTIfPMIntervalFECUncorrectedWords Counter64,
jnxOpticsOTIfPMIntervalMinFECBERMantissa Unsigned32,
jnxOpticsOTIfPMIntervalMinFECBERExponent Unsigned32,
jnxOpticsOTIfPMIntervalMaxFECBERMantissa Unsigned32,
jnxOpticsOTIfPMIntervalMaxFECBERExponent Unsigned32,
jnxOpticsOTIfPMIntervalAvgFECBERMantissa Unsigned32,
jnxOpticsOTIfPMIntervalAvgFECBERExponent Unsigned32,
jnxOpticsOTIfPMFECIntervalTimeStamp DateAndTime,
jnxOpticsOTIfPMFECIntSuspectReason Integer32
}
jnxOpticsOTIfPMFECIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1."
::= { jnxOpticsOTIfPMFECIntervalEntry 1}
jnxOpticsOTIfPMFECIntervalSuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsOTIfPMFECIntervalEntry 2}
jnxOpticsOTIfPMIntervalFECCorrectedErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bits corrected by the FEC are counted in the
interval."
::= { jnxOpticsOTIfPMFECIntervalEntry 3}
jnxOpticsOTIfPMIntervalFECUncorrectedWords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of words un-corrected words by the FEC are counted over
the interval."
::= { jnxOpticsOTIfPMFECIntervalEntry 4}
jnxOpticsOTIfPMIntervalMinFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 5}
jnxOpticsOTIfPMIntervalMinFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 6}
jnxOpticsOTIfPMIntervalMaxFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 7}
jnxOpticsOTIfPMIntervalMaxFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 8}
jnxOpticsOTIfPMIntervalAvgFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 9}
jnxOpticsOTIfPMIntervalAvgFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average Pre
FEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECIntervalEntry 10}
jnxOpticsOTIfPMFECIntervalTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp of this interval."
::= { jnxOpticsOTIfPMFECIntervalEntry 11 }
jnxOpticsOTIfPMFECIntSuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restarts
"
::= { jnxOpticsOTIfPMFECIntervalEntry 12 }
--
-- OT interface FEC PM Current Day Table
--
jnxOpticsOTIfPMFECCurrentDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfPMFECCurrentDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Performance monitoring FEC current day table."
::= { jnxOpticsPerformanceMonitoring 6 }
jnxOpticsOTIfPMFECCurrentDayEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfPMFECCurrentDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Near end or Far End performance
monitoring FEC current day table."
INDEX { ifIndex }
::= { jnxOpticsOTIfPMFECCurrentDayTable 1 }
JnxOpticsOTIfPMFECCurrentDayEntry ::=
SEQUENCE {
jnxOpticsOTIfPMFECCurrentDaySuspectedFlag TruthValue,
jnxOpticsOTIfPMCurrentDayFECCorrectedErr Counter64,
jnxOpticsOTIfPMCurrentDayFECUncorrectedWords Counter64,
jnxOpticsOTIfPMCurrentDayMinFECBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentDayMinFECBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentDayMaxFECBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentDayMaxFECBERExponent Unsigned32,
jnxOpticsOTIfPMCurrentDayAvgFECBERMantissa Unsigned32,
jnxOpticsOTIfPMCurrentDayAvgFECBERExponent Unsigned32,
jnxOpticsOTIfPMFECCurrentDayElapsedTime Unsigned32,
jnxOpticsOTIfPMFECCurDaySuspectReason Integer32
}
jnxOpticsOTIfPMFECCurrentDaySuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 1}
jnxOpticsOTIfPMCurrentDayFECCorrectedErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bits corrected by the FEC are counted in the
interval."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 2}
jnxOpticsOTIfPMCurrentDayFECUncorrectedWords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of words un-corrected by the FEC are counted over the
Day."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 3}
jnxOpticsOTIfPMCurrentDayMinFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 4}
jnxOpticsOTIfPMCurrentDayMinFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 5}
jnxOpticsOTIfPMCurrentDayMaxFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 6}
jnxOpticsOTIfPMCurrentDayMaxFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 7}
jnxOpticsOTIfPMCurrentDayAvgFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 8}
jnxOpticsOTIfPMCurrentDayAvgFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average
PreFEC BER in the current 24hour period."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 9}
jnxOpticsOTIfPMFECCurrentDayElapsedTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time elapsed for current day."
::= { jnxOpticsOTIfPMFECCurrentDayEntry 10}
jnxOpticsOTIfPMFECCurDaySuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaild
"
::= { jnxOpticsOTIfPMFECCurrentDayEntry 11}
--
-- FEC PM Prev day Table
--
jnxOpticsOTIfPMFECPrevDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfPMFECPrevDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Performance monitoring FEC previous day table."
::= { jnxOpticsPerformanceMonitoring 7 }
jnxOpticsOTIfPMFECPrevDayEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfPMFECPrevDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Near end or Far End performance
monitoring FEC previous day table."
INDEX { ifIndex }
::= { jnxOpticsOTIfPMFECPrevDayTable 1 }
JnxOpticsOTIfPMFECPrevDayEntry::=
SEQUENCE {
jnxOpticsOTIfPMFECPrevDaySuspectedFlag TruthValue,
jnxOpticsOTIfPMPrevDayFECCorrectedErr Counter64,
jnxOpticsOTIfPMPrevDayFECUncorrectedWords Counter64,
jnxOpticsOTIfPMPrevDayMinFECBERMantissa Unsigned32,
jnxOpticsOTIfPMPrevDayMinFECBERExponent Unsigned32,
jnxOpticsOTIfPMPrevDayMaxFECBERMantissa Unsigned32,
jnxOpticsOTIfPMPrevDayMaxFECBERExponent Unsigned32,
jnxOpticsOTIfPMPrevDayAvgFECBERMantissa Unsigned32,
jnxOpticsOTIfPMPrevDayAvgFECBERExponent Unsigned32,
jnxOpticsOTIfPMFECPrevDayTimeStamp DateAndTime,
jnxOpticsOTIfPMFECPrevDaySuspectReason Integer32
}
jnxOpticsOTIfPMFECPrevDaySuspectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the data in this entry may be unreliable."
::= { jnxOpticsOTIfPMFECPrevDayEntry 1}
jnxOpticsOTIfPMPrevDayFECCorrectedErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bits corrected by the FEC are counted in the
previous day."
::= { jnxOpticsOTIfPMFECPrevDayEntry 2}
jnxOpticsOTIfPMPrevDayFECUncorrectedWords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of un-corrected words by the FEC are counted over the
previous Day."
::= { jnxOpticsOTIfPMFECPrevDayEntry 3}
jnxOpticsOTIfPMPrevDayMinFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period."
::= { jnxOpticsOTIfPMFECPrevDayEntry 4}
jnxOpticsOTIfPMPrevDayMinFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the previous 24hour period."
::= { jnxOpticsOTIfPMFECPrevDayEntry 5}
jnxOpticsOTIfPMPrevDayMaxFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period (mantissa)."
::= { jnxOpticsOTIfPMFECPrevDayEntry 6}
jnxOpticsOTIfPMPrevDayMaxFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the maximum Pre FEC BER in the previous 24hour period."
::= { jnxOpticsOTIfPMFECPrevDayEntry 7}
jnxOpticsOTIfPMPrevDayAvgFECBERMantissa OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER during the previous 24hour period (mantissa)."
::= { jnxOpticsOTIfPMFECPrevDayEntry 8}
jnxOpticsOTIfPMPrevDayAvgFECBERExponent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the average Pre FEC BER during the previous 24hour period."
::= { jnxOpticsOTIfPMFECPrevDayEntry 9}
jnxOpticsOTIfPMFECPrevDayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp for the Prev day."
::= { jnxOpticsOTIfPMFECPrevDayEntry 10}
jnxOpticsOTIfPMFECPrevDaySuspectReason OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaild
"
::= { jnxOpticsOTIfPMFECPrevDayEntry 11}
--
-- OT interface Optics Table
--
jnxOpticsOTIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOTIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the OT interface optics config Table. "
::= { jnxOptics 8 }
jnxOpticsOTIfConfigEntry OBJECT-TYPE
SYNTAX JnxOpticsOTIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the OT interface optics
config Table."
INDEX { jnxOpticsOTIfConfigContainerIndex, jnxOpticsOTIfConfigL1Index,
jnxOpticsOTIfConfigL2Index, jnxOpticsOTIfConfigL3Index }
::= { jnxOpticsOTIfConfigTable 1 }
JnxOpticsOTIfConfigEntry ::=
SEQUENCE {
jnxOpticsOTIfConfigContainerIndex
Integer32,
jnxOpticsOTIfConfigL1Index
Integer32,
jnxOpticsOTIfConfigL2Index
Integer32,
jnxOpticsOTIfConfigL3Index
Integer32,
jnxOpticsOTIfLaserEnable
TruthValue,
jnxOpticsOTIfFecMode
JnxOpticsOTIfFecType,
jnxOpticsOTIfEncodingOption
JnxOpticsOTIfEncodingOptions,
jnxOpticsOTIfModulation
Integer32,
jnxOpticsOTIfAdminState
JnxOpticsOTIfAdminStates,
jnxOpticsOTIfOperState
JnxOpticsOTIfOperStates,
jnxOpticsOTIfHighPolarization
TruthValue,
jnxOpticsOTIfPreFecBERThresholdMantissa
Integer32,
jnxOpticsOTIfPreFecBERThresholdExponent
Integer32,
jnxOpticsOTIfPreFecBERThresholdTime
Integer32,
jnxOpticsOTIfPreFecBERThresholdClearMantissa
Integer32,
jnxOpticsOTIfPreFecBERThresholdClearExponent
Integer32
}
jnxOpticsOTIfConfigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxOpticsOTIfConfigEntry 1 }
jnxOpticsOTIfConfigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxOpticsOTIfConfigEntry 2 }
jnxOpticsOTIfConfigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxOpticsOTIfConfigEntry 3 }
jnxOpticsOTIfConfigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject.. eg port."
::= { jnxOpticsOTIfConfigEntry 4 }
jnxOpticsOTIfLaserEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0 - laser off
1 - laser on "
::= { jnxOpticsOTIfConfigEntry 5 }
jnxOpticsOTIfFecMode OBJECT-TYPE
SYNTAX JnxOpticsOTIfFecType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates what FEC type in the OTU frame"
::= { jnxOpticsOTIfConfigEntry 6 }
jnxOpticsOTIfEncodingOption OBJECT-TYPE
SYNTAX JnxOpticsOTIfEncodingOptions
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encoding option selected"
::= { jnxOpticsOTIfConfigEntry 7 }
jnxOpticsOTIfModulation OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Modulation formats supported on the platform
Unknown - (0),
16QAM - (1),
8QAM - (2),
QPSK - (3)
"
::= { jnxOpticsOTIfConfigEntry 8 }
jnxOpticsOTIfAdminState OBJECT-TYPE
SYNTAX JnxOpticsOTIfAdminStates
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Admin state of this interface"
::= { jnxOpticsOTIfConfigEntry 9 }
jnxOpticsOTIfOperState OBJECT-TYPE
SYNTAX JnxOpticsOTIfOperStates
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of this interface"
::= { jnxOpticsOTIfConfigEntry 10 }
jnxOpticsOTIfHighPolarization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable high-polarization mode."
::= { jnxOpticsOTIfConfigEntry 11 }
jnxOpticsOTIfPreFecBERThresholdMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.
"
::= { jnxOpticsOTIfConfigEntry 12 }
jnxOpticsOTIfPreFecBERThresholdExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.
"
::= { jnxOpticsOTIfConfigEntry 13 }
jnxOpticsOTIfPreFecBERThresholdTime OBJECT-TYPE
SYNTAX Integer32
UNITS "ms"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specify the interval for which the BER must stay above
the signal degradation threshold or below the clear threshold
for the alarm to be raised or cleared respectively.
"
::= { jnxOpticsOTIfConfigEntry 14 }
jnxOpticsOTIfPreFecBERThresholdClearMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.
"
::= { jnxOpticsOTIfConfigEntry 15 }
jnxOpticsOTIfPreFecBERThresholdClearExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.
"
::= { jnxOpticsOTIfConfigEntry 16 }
--
-- Optics Alarm/Alert Table
--
jnxOpticsNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Notification entries."
::= { jnxOpticsAlarm 1 }
jnxOpticsNotificationEntry OBJECT-TYPE
SYNTAX JnxOpticsNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Notification table."
INDEX { ifIndex, jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection
}
::= { jnxOpticsNotificationTable 1 }
JnxOpticsNotificationEntry ::= SEQUENCE {
jnxOpticsNotificationLocation
JnxOpticsLocation,
jnxOpticsNotificationDirection
JnxOpticsDirection,
jnxOpticsNotificationSeverity
JnxOpticsSeverity,
jnxOpticsLastNotificationId
JnxOpticsNotificationId,
jnxOpticsNotificationDate
DateAndTime,
jnxOpticsNotificationLaneIndex
Integer32
}
jnxOpticsNotificationLocation OBJECT-TYPE
SYNTAX JnxOpticsLocation
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
Near end/Far end."
::= { jnxOpticsNotificationEntry 1 }
jnxOpticsNotificationDirection OBJECT-TYPE
SYNTAX JnxOpticsDirection
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
for the Tx/Rx or both."
::= { jnxOpticsNotificationEntry 2 }
jnxOpticsLastNotificationId OBJECT-TYPE
SYNTAX JnxOpticsNotificationId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the OTN alarm that most recently
was set or cleared."
::= { jnxOpticsNotificationEntry 3 }
jnxOpticsNotificationSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the severity of the last alarm/alert
that most recently was set or cleared."
::= { jnxOpticsNotificationEntry 4 }
jnxOpticsNotificationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This specifies the date and time when this alarm occurred."
::= { jnxOpticsNotificationEntry 5 }
jnxOpticsNotificationLaneIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lane index associated with this subject..
eg port.
"
::= { jnxOpticsNotificationEntry 6 }
--
-- Clear PM's for Interfaces
--
-- Clear for all Performance monitoring counters on this interface
--
jnxOpticsClearAllPMs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" To clear all optics Performance monitoring counters on all
interfaces. "
::= { jnxOptics 6 }
jnxOpticsClearIfPMsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" To clear optics Performance monitoring counters on this
interfaces "
::= { jnxOptics 7 }
jnxOpticsClearIfPMsEntry OBJECT-TYPE
SYNTAX JnxOpticsClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that s used to clear the Optics PM Table."
INDEX { ifIndex }
::= { jnxOpticsClearIfPMsTable 1 }
JnxOpticsClearIfPMsEntry ::=
SEQUENCE {
jnxOpticsClearCurrent
TruthValue,
jnxOpticsClearInterfaceInterval
TruthValue,
jnxOpticsClearInterfaceDay
TruthValue,
jnxOpticsClearInterfaceAll
TruthValue
}
jnxOpticsClearCurrent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the Current Optics PM's for this interface
"
::= { jnxOpticsClearIfPMsEntry 1 }
jnxOpticsClearInterfaceInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the Optics PM's intervals(1-96) for this
interface
"
::= { jnxOpticsClearIfPMsEntry 2 }
jnxOpticsClearInterfaceDay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the Current Day and Previous Day Optics PM's
for this interface
"
::= { jnxOpticsClearIfPMsEntry 3 }
jnxOpticsClearInterfaceAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the Optics PM's for this interface
"
::= { jnxOpticsClearIfPMsEntry 4 }
--
-- Alarm/Alert Notifications
--
jnxOpticsNotificationPrefix OBJECT IDENTIFIER ::=
{ jnxOpticsNotifications 0 }
jnxOpticsNotificationSet NOTIFICATION-TYPE
OBJECTS {
jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection,
ifDescr,
jnxOpticsLastNotificationId,
jnxOpticsNotificationSeverity,
jnxOpticsNotificationDate,
jnxOpticsNotificationLaneIndex
}
STATUS current
DESCRIPTION
"Notification of a recently set optics alarm."
::= { jnxOpticsNotificationPrefix 1 }
jnxOpticsNotificationCleared NOTIFICATION-TYPE
OBJECTS {
jnxOpticsNotificationLocation,
jnxOpticsNotificationDirection,
ifDescr,
jnxOpticsLastNotificationId,
jnxOpticsNotificationSeverity,
jnxOpticsNotificationDate,
jnxOpticsNotificationLaneIndex
}
STATUS current
DESCRIPTION
"Notification of a recently cleared optics alarm."
::= { jnxOpticsNotificationPrefix 2 }
jnxIfOpticsNotificationAdminStatus NOTIFICATION-TYPE
OBJECTS {
ifDescr,
jnxOpticsOTIfAdminState
}
STATUS current
DESCRIPTION
"Notification of the admin state of the optics interface."
::= { jnxOpticsNotificationPrefix 3 }
jnxIfOpticsNotificationOperStatus NOTIFICATION-TYPE
OBJECTS {
ifDescr,
jnxOpticsOTIfOperState
}
STATUS current
DESCRIPTION
"Notification of operational state of the optics interface"
::= { jnxOpticsNotificationPrefix 4 }
--
-- Iplc Alarm/Alert Notifications
--
jnxIplcNotificationPrefix OBJECT IDENTIFIER ::=
{ jnxIplcNotifications 0 }
jnxIplcNotificationSet NOTIFICATION-TYPE
OBJECTS {
jnxIplcNotificationLocation,
jnxIplcNotificationDirection,
jnxIplcNotificationSlot,
jnxIplcNotificationChannel,
jnxIplcLastNotificationId,
jnxIplcNotificationSeverity,
jnxIplcNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently set iplc alarm."
::= { jnxIplcNotificationPrefix 1 }
jnxIplcNotificationCleared NOTIFICATION-TYPE
OBJECTS {
jnxIplcNotificationLocation,
jnxIplcNotificationDirection,
jnxIplcNotificationSlot,
jnxIplcNotificationChannel,
jnxIplcLastNotificationId,
jnxIplcNotificationSeverity,
jnxIplcNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently cleared iplc alarm."
::= { jnxIplcNotificationPrefix 2 }
--
-- Ila Alarm/Alert Notifications
--
jnxIlaNotificationPrefix OBJECT IDENTIFIER ::=
{ jnxIlaNotifications 0 }
jnxIlaNotificationSet NOTIFICATION-TYPE
OBJECTS {
jnxIlaNotificationLocation,
jnxIlaNotificationDirection,
jnxIlaNotificationSlot,
jnxIlaNotificationIlaID,
jnxIlaLastNotificationId,
jnxIlaNotificationSeverity,
jnxIlaNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently set iplc alarm."
::= { jnxIlaNotificationPrefix 1 }
jnxIlaNotificationCleared NOTIFICATION-TYPE
OBJECTS {
jnxIlaNotificationLocation,
jnxIlaNotificationDirection,
jnxIlaNotificationSlot,
jnxIlaNotificationIlaID,
jnxIlaLastNotificationId,
jnxIlaNotificationSeverity,
jnxIlaNotificationDate
}
STATUS current
DESCRIPTION
"Notification of a recently cleared iplc alarm."
::= { jnxIlaNotificationPrefix 2 }
--
-- Iplc Alarm/Alert Table
--
jnxIplcNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIplcNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Notification entries."
::= { jnxIplcAlarm 1 }
jnxIplcNotificationEntry OBJECT-TYPE
SYNTAX JnxIplcNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Notification table."
INDEX { jnxIplcNotificationSlot,
jnxIplcNotificationChannel
}
::= { jnxIplcNotificationTable 1 }
JnxIplcNotificationEntry ::= SEQUENCE {
jnxIplcNotificationLocation
JnxOpticsLocation,
jnxIplcNotificationDirection
JnxOpticsDirection,
jnxIplcNotificationSlot
Integer32,
jnxIplcNotificationChannel
Integer32,
jnxIplcLastNotificationId
JnxIplcNotificationId,
jnxIplcNotificationSeverity
JnxOpticsSeverity,
jnxIplcNotificationDate
DateAndTime
}
jnxIplcNotificationLocation OBJECT-TYPE
SYNTAX JnxOpticsLocation
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
Near end/Far end."
::= { jnxIplcNotificationEntry 1 }
jnxIplcNotificationDirection OBJECT-TYPE
SYNTAX JnxOpticsDirection
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
for the Tx/Rx or both."
::= { jnxIplcNotificationEntry 2 }
jnxIplcNotificationSlot OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
slot id."
::= { jnxIplcNotificationEntry 3 }
jnxIplcNotificationChannel OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
Channel id."
::= { jnxIplcNotificationEntry 4 }
jnxIplcLastNotificationId OBJECT-TYPE
SYNTAX JnxIplcNotificationId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the IPLC alarm that most recently
was set or cleared."
::= { jnxIplcNotificationEntry 5 }
jnxIplcNotificationSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the severity of the last alarm/alert
that most recently was set or cleared."
::= { jnxIplcNotificationEntry 6 }
jnxIplcNotificationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This specifies the date and time when this alarm occurred."
::= { jnxIplcNotificationEntry 7 }
--
-- Ila Alarm/Alert Table
--
jnxIlaNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIlaNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Notification entries."
::= { jnxIlaAlarm 1 }
jnxIlaNotificationEntry OBJECT-TYPE
SYNTAX JnxIlaNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual entry in the Notification table."
INDEX { jnxIlaNotificationSlot,
jnxIlaNotificationIlaID
}
::= { jnxIlaNotificationTable 1 }
JnxIlaNotificationEntry ::= SEQUENCE {
jnxIlaNotificationLocation
JnxOpticsLocation,
jnxIlaNotificationDirection
JnxOpticsDirection,
jnxIlaNotificationSlot
Integer32,
jnxIlaNotificationIlaID
Integer32,
jnxIlaLastNotificationId
JnxIlaNotificationId,
jnxIlaNotificationSeverity
JnxOpticsSeverity,
jnxIlaNotificationDate
DateAndTime
}
jnxIlaNotificationLocation OBJECT-TYPE
SYNTAX JnxOpticsLocation
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
Near end/Far end."
::= { jnxIlaNotificationEntry 1 }
jnxIlaNotificationDirection OBJECT-TYPE
SYNTAX JnxOpticsDirection
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
for the Tx/Rx or both."
::= { jnxIlaNotificationEntry 2 }
jnxIlaNotificationSlot OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
slot id."
::= { jnxIlaNotificationEntry 3 }
jnxIlaNotificationIlaID OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies indicates if this entry was for
the ILA id."
::= { jnxIlaNotificationEntry 4 }
jnxIlaLastNotificationId OBJECT-TYPE
SYNTAX JnxIlaNotificationId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the Ila alarm that most recently
was set or cleared."
::= { jnxIlaNotificationEntry 5 }
jnxIlaNotificationSeverity OBJECT-TYPE
SYNTAX JnxOpticsSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifies the severity of the last alarm/alert
that most recently was set or cleared."
::= { jnxIlaNotificationEntry 6 }
jnxIlaNotificationDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This specifies the date and time when this alarm occurred."
::= { jnxIlaNotificationEntry 7 }
--
-- Optics config OCH2 table
--
jnxOpticsOCh2ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOCh2ConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the optics config Table. "
::= { jnxOpticsOCh2 1 }
jnxOpticsOCh2ConfigEntry OBJECT-TYPE
SYNTAX JnxOpticsOCh2ConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A conceptual row that contains information about the optics
config OCh2 Table."
INDEX { jnxOpticsOCh2CfgContIndex, jnxOpticsOCh2CfgL1Index,
jnxOpticsOCh2CfgL2Index, jnxOpticsOCh2CfgL3Index,
jnxOpticsOCh2CfgL4Index }
::= { jnxOpticsOCh2ConfigTable 1 }
JnxOpticsOCh2ConfigEntry ::=
SEQUENCE {
jnxOpticsOCh2CfgContIndex
Integer32,
jnxOpticsOCh2CfgL1Index
Integer32,
jnxOpticsOCh2CfgL2Index
Integer32,
jnxOpticsOCh2CfgL3Index
Integer32,
jnxOpticsOCh2CfgL4Index
Integer32,
jnxOpticsOCh2Type
Integer32,
jnxOpticsOCh2LaserEnable
TruthValue,
jnxOpticsOCh2Wavelength
Unsigned32,
jnxOpticsOCh2Spacing
JnxOpticsChannelSpacing,
jnxOpticsOCh2Modulation
Unsigned32,
jnxOpticsOCh2TxOpticalPower
Integer32,
jnxOpticsOCh2RxOpticalPower
Integer32,
jnxOpticsOCh2ModTempHighThresh
Integer32,
jnxOpticsOCh2ModTempLowThresh
Integer32,
jnxOpticsOCh2TxPowHighThresh
Integer32,
jnxOpticsOCh2TxPowLowThresh
Integer32,
jnxOpticsOCh2RxPowHighThresh
Integer32,
jnxOpticsOCh2RxPowLowThresh
Integer32,
jnxOpticsOCh24HourModTemHiThresh
Integer32,
jnxOpticsOCh24HourModTemLoThresh
Integer32,
jnxOpticsOCh24HourTxPowHiThresh
Integer32,
jnxOpticsOCh24HourTxPowLoThresh
Integer32,
jnxOpticsOCh24HourRxPowHiThresh
Integer32,
jnxOpticsOCh24HourRxPowLoThresh
Integer32,
jnxOpticsOCh2RxLosPowWarnThresh
Integer32,
jnxOpticsOCh2RxLosPowAlarmThresh
Integer32,
jnxOpticsOCh2CurrentStatus
BITS,
jnxOpticsOCh2TxPowHiEnableTCA
TruthValue,
jnxOpticsOCh2TxPowLoEnableTCA
TruthValue,
jnxOpticsOCh2RxPowHiEnableTCA
TruthValue,
jnxOpticsOCh2RxPowLoEnableTCA
TruthValue,
jnxOpticsOCh2ModTempHiEnableTCA
TruthValue,
jnxOpticsOCh2ModTempLoEnableTCA
TruthValue,
jnxOpticsOCh2CarFreqOffHiEnTCA
TruthValue,
jnxOpticsOCh2CarFreqOffLoEnTCA
TruthValue,
jnxOpticsOCh2CarFreqOffHiThresh
Integer32,
jnxOpticsOCh24HourCarFreqOffHiTh
Integer32,
jnxOpticsOCh2CarFreqOffLoThresh
Integer32,
jnxOpticsOCh24HourCarFreqOffLoTh
Integer32
}
jnxOpticsOCh2CfgContIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The Contianer index associated with this subject"
::= { jnxOpticsOCh2ConfigEntry 1 }
jnxOpticsOCh2CfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC slot number of the interface"
::= { jnxOpticsOCh2ConfigEntry 2 }
jnxOpticsOCh2CfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC slot number of the interface"
::= { jnxOpticsOCh2ConfigEntry 3 }
jnxOpticsOCh2CfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface"
::= { jnxOpticsOCh2ConfigEntry 4 }
jnxOpticsOCh2CfgL4Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Sub-Port number of the interface"
::= { jnxOpticsOCh2ConfigEntry 5 }
jnxOpticsOCh2Type OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
" 0 - none
1 - SFP
2 - XFP
3 - SFP+
4 - XFP+
5 - CFP
6 - CFP+
7 - Non pluggable "
::= { jnxOpticsOCh2ConfigEntry 6 }
jnxOpticsOCh2LaserEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" 0 - laser off
1 - laser on "
::= { jnxOpticsOCh2ConfigEntry 7 }
jnxOpticsOCh2Wavelength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01 nm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The transmit wavelength of the laser."
::= { jnxOpticsOCh2ConfigEntry 8 }
jnxOpticsOCh2Spacing OBJECT-TYPE
SYNTAX JnxOpticsChannelSpacing
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A minimum nominal difference in frequency (GHz) between two
adjacent channels."
::= { jnxOpticsOCh2ConfigEntry 9 }
jnxOpticsOCh2Modulation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Modulation
Unknown - (1),
NonPSK - (2),
ODB - (3),
DPSK - (4),
QPSK - (5),
DQPSK - (6),
DPQPSK - (7),
16QAM - (8),
64QAM - (9),
256QAM - (10)
"
::= { jnxOpticsOCh2ConfigEntry 10 }
jnxOpticsOCh2TxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Transmit optical power."
::= { jnxOpticsOCh2ConfigEntry 11 }
jnxOpticsOCh2RxOpticalPower OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Receive optical power."
::= { jnxOpticsOCh2ConfigEntry 12 }
jnxOpticsOCh2ModTempHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"High module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 13 }
jnxOpticsOCh2ModTempLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Low module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 14 }
jnxOpticsOCh2TxPowHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Tx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 15 }
jnxOpticsOCh2TxPowLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Tx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 16 }
jnxOpticsOCh2RxPowHighThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 17 }
jnxOpticsOCh2RxPowLowThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 18 }
jnxOpticsOCh24HourModTemHiThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"High module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 19 }
jnxOpticsOCh24HourModTemLoThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius (0.01 degrees C)"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Low module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 20 }
jnxOpticsOCh24HourTxPowHiThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Tx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 21 }
jnxOpticsOCh24HourTxPowLoThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Tx for a 24 hour period Power below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 22 }
jnxOpticsOCh24HourRxPowHiThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 23 }
jnxOpticsOCh24HourRxPowLoThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx Power for a 24 hour period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 24 }
jnxOpticsOCh2RxLosPowWarnThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx Power warning threshold for seeting the optical LOS
warning. "
::= { jnxOpticsOCh2ConfigEntry 25 }
jnxOpticsOCh2RxLosPowAlarmThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01 dbm"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rx Power alarm threshold for seeting the optical LOS
warning. "
::= { jnxOpticsOCh2ConfigEntry 26 }
jnxOpticsOCh2CurrentStatus OBJECT-TYPE
SYNTAX BITS {
opticalLos(1),
wavelenthLockErr(2),
powerHighAlarm(3),
powerLowAlarm(4),
biasCurrentHighAlarm(5),
biasCurrentLowAlarm(6),
temperatureHighAlarm(7),
temperaturelowAlarm(8),
txPLLLockAlarm(9),
rxPLLLockAlarm(10),
avgPowerAlarm(11),
rxLossAvgPowerAlarm(12),
lossofACPowerAlarm(13),
txPowerHighThreshAlert(14),
txPowerLowThreshAlert(15),
rxPowerHighThreshAlert(16),
rxPowerLowThreshAlert(17),
moduleTempHighThreshAlert(18),
moduleTempLowThreshAlert(19),
txPowerHigh24HourThreshAlert(20),
txPowerLow24HourThreshAlert(21),
rxPowerHigh24HourThreshAlert(22),
rxPowerLow24HourThreshAlert(23),
moduleTempHigh24HourThreshAlert(24),
moduleTempLow24HourThreshAlert(25),
powerRxHighAlarm(26),
powerRxLowAlarm(27),
powerTxHighWarning(28),
powerTxLowWarning(29),
powerRxHighWarning(30),
powerRxLowWarning(31),
temperatureHighWarning(32),
temperaturelowWarning(33)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
" "
::= { jnxOpticsOCh2ConfigEntry 27 }
jnxOpticsOCh2TxPowHiEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Tx Power High TCA."
::= { jnxOpticsOCh2ConfigEntry 28 }
jnxOpticsOCh2TxPowLoEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Tx Power Low TCA."
::= { jnxOpticsOCh2ConfigEntry 29 }
jnxOpticsOCh2RxPowHiEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Rx Power High TCA."
::= { jnxOpticsOCh2ConfigEntry 30 }
jnxOpticsOCh2RxPowLoEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Rx Power Low TCA."
::= { jnxOpticsOCh2ConfigEntry 31 }
jnxOpticsOCh2ModTempHiEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Module Temp High TCA."
::= { jnxOpticsOCh2ConfigEntry 32 }
jnxOpticsOCh2ModTempLoEnableTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Module Temp Low TCA."
::= { jnxOpticsOCh2ConfigEntry 33 }
jnxOpticsOCh2CarFreqOffHiEnTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the Carrier Frequency Offset High TCA."
::= { jnxOpticsOCh2ConfigEntry 34 }
jnxOpticsOCh2CarFreqOffLoEnTCA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" Enable/Disable for the CarrierFreqOffetLow TCA's."
::= { jnxOpticsOCh2ConfigEntry 35 }
jnxOpticsOCh2CarFreqOffHiThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Carrier frequency offset for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 36 }
jnxOpticsOCh24HourCarFreqOffHiTh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Carrier frequency offset for a 24 Hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 37 }
jnxOpticsOCh2CarFreqOffLoThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Carrier frequency offset for a 15 minute period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 38 }
jnxOpticsOCh24HourCarFreqOffLoTh OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Carrier frequency offset for a 24 Hour period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period ."
::= { jnxOpticsOCh2ConfigEntry 39 }
--
-- Tracetone config
--
jnxOpticsOCh2TraceToneCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOpticsOCh2TraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the optics tests."
::= { jnxOpticsOCh2 2 }
jnxOpticsOCh2TraceToneCfgEntry OBJECT-TYPE
SYNTAX JnxOpticsOCh2TraceToneCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information about the optics FRU's."
INDEX { jnxOpticsOCh2TraceToneCfgIndx, jnxOpticsOCh2TraceToneCfgL1Indx,
jnxOpticsOCh2TraceToneCfgL2Indx, jnxOpticsOCh2TraceToneCfgL3Indx,
jnxOpticsOCh2TraceToneCfgL4Indx }
::= { jnxOpticsOCh2TraceToneCfgTable 1 }
JnxOpticsOCh2TraceToneCfgEntry ::=
SEQUENCE {
jnxOpticsOCh2TraceToneCfgIndx Integer32,
jnxOpticsOCh2TraceToneCfgL1Indx Integer32,
jnxOpticsOCh2TraceToneCfgL2Indx Integer32,
jnxOpticsOCh2TraceToneCfgL3Indx Integer32,
jnxOpticsOCh2TraceToneCfgL4Indx Integer32,
jnxOpticsOCh2TraceToneCfgTxEn TruthValue,
jnxOpticsOCh2TraceToneCfgRxEn TruthValue,
jnxOpticsOCh2TraceToneCfgDestId OCTET STRING,
jnxOpticsOCh2TraceToneCfgTxMsg OCTET STRING,
jnxOpticsOCh2TraceToneCfgRxMsg OCTET STRING
}
jnxOpticsOCh2TraceToneCfgIndx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Container Index associated with this subject.."
::= { jnxOpticsOCh2TraceToneCfgEntry 1 }
jnxOpticsOCh2TraceToneCfgL1Indx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC Slot number of the interface."
::= { jnxOpticsOCh2TraceToneCfgEntry 2 }
jnxOpticsOCh2TraceToneCfgL2Indx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC Slot number of the interface."
::= { jnxOpticsOCh2TraceToneCfgEntry 3 }
jnxOpticsOCh2TraceToneCfgL3Indx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface."
::= { jnxOpticsOCh2TraceToneCfgEntry 4 }
jnxOpticsOCh2TraceToneCfgL4Indx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Sub-Port number of the interface."
::= { jnxOpticsOCh2TraceToneCfgEntry 5 }
jnxOpticsOCh2TraceToneCfgTxEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This will enable/disable the transmit Trace tone feature."
::= { jnxOpticsOCh2TraceToneCfgEntry 6 }
jnxOpticsOCh2TraceToneCfgRxEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This will enable/disable the receive Trace tone feature."
::= { jnxOpticsOCh2TraceToneCfgEntry 7 }
jnxOpticsOCh2TraceToneCfgDestId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the destination Id of the link
ID/ the chassis and the blade.
The transmit messages will also have the src id
which is this chassis id and this port info."
::= { jnxOpticsOCh2TraceToneCfgEntry 8 }
jnxOpticsOCh2TraceToneCfgTxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This will be the transmit data in the tracetone message."
::= { jnxOpticsOCh2TraceToneCfgEntry 9 }
jnxOpticsOCh2TraceToneCfgRxMsg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This will be the receive data in the trace tone message."
::= { jnxOpticsOCh2TraceToneCfgEntry 10 }
END