david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junos/JUNIPER-IFOTN-MIB

2552 lines
85 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- Juniper Enterprise Specific MIB: OTN interface management
--
-- Copyright (c) 2012-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-IFOTN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, NOTIFICATION-TYPE,
Unsigned32, Counter32, Integer32
FROM SNMPv2-SMI
DisplayString, DateAndTime, TEXTUAL-CONVENTION, RowStatus, TruthValue
FROM SNMPv2-TC
jnxIfOtnMibRoot, jnxIfOtnNotifications
FROM JUNIPER-SMI
ifIndex, ifDescr
FROM IF-MIB
JnxoptIfOTNOChAlarms, JnxoptIfOTNODUkTcmAlarms
FROM JNX-OPT-IF-EXT-MIB;
jnxIfOtnMib MODULE-IDENTITY
LAST-UPDATED "201609122015Z" -- Mon Sep 12 20:15:00 IST 2016
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION " Deprecated OCh2 tables and entries"
REVISION "201609122015Z"
DESCRIPTION
"Removed INDEX clause from unwanted places"
REVISION "201609122015Z"
DESCRIPTION
"This MIB module defines objects used for managing the
OTN interface for Juniper products."
REVISION "201607271100Z"
DESCRIPTION
"Added config to leave fist byte of TTI as NULL
per the G.709 recommendation."
REVISION "201506241227Z"
DESCRIPTION
"Removed INDEX clause from unwanted places"
REVISION "201609122015Z"
DESCRIPTION
"This MIB module defines objects used for managing the
OTN interface for Juniper products."
REVISION "201506241227Z"
DESCRIPTION
" Added OTN table entries for handling sub-port
in the interface name. With suffix OCH2"
REVISION "201201270000Z"
DESCRIPTION
"Added OTN Alarms and PM data."
REVISION "201201270000Z"
DESCRIPTION
"Initial revision."
::= { jnxIfOtnMibRoot 1 }
--
-- Textual Conventions
--
JnxIfAdminStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Admin states for an interface"
SYNTAX INTEGER {
jnxAdminStateInService(1),
-- In service
jnxAdminStateInServiceMA(2),
-- In service maintenance, the link is in
-- service, but alarms are suppressed
jnxAdminStateOutofService(3),
-- Out of service due to a fault
jnxAdminStateOutofServiceMA(4)
-- OOS maintenance as configured by the
-- user, may or may not have alarms`
}
JnxIfOperStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Operational states for an interface"
SYNTAX INTEGER {
jnxOperStateInit(1),
-- Starting state of the interface
jnxOperStateNormal(2),
-- The interface is working normally
jnxOperStateFault(3),
-- There is some traffic affecting fault
-- on the interface eg LOS
jnxOperStateDegraded(4)
-- There is some function affecting
-- degrading the performance on the
-- interface for eg BER
}
JnxIfOtnRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Rates for an interface "
SYNTAX INTEGER {
otu0(1),
otu1(2),
otu2(3),
otu2e(4),
otu3(5),
otu4(6),
otu1e(7),
otu5(8)
}
JnxIfOtnFecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "fec modes of an interface "
SYNTAX INTEGER {
nofec(0),
gfec(1),
efecI2(2),
efecI3(3),
efecI4(4),
efecI5(5),
efecI6(6),
efecI7(7),
efecI8(8),
efecI9(9),
gfecandsdfec(10),
sdfec(11),
hgfec(12),
sdfec15(13)
}
JnxIfOtnLayer ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Layer which describes the table"
SYNTAX INTEGER {
jnxOch(1),
jnxOTUk(2),
jnxODUk(3),
jnxTCM(4)
}
JnxIfOtnType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Near End or Far End "
SYNTAX INTEGER {
jnxNearEnd(1),
jnxFarEnd(2)
}
JnxIfOtnDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Direction for the entities in the table"
SYNTAX INTEGER {
jnxTxDir(1),
jnxRxDir(2),
jnxBiDir(3)
}
JnxIfOtnSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Severity of the Notification"
SYNTAX INTEGER {
jnxCritical(1),
jnxMajor(2),
jnxMinor(3),
jnxInfo(4)
}
JnxIfOtnServiceStateAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION " Notification's action on the service state"
SYNTAX INTEGER {
jnxNotSupported(0),
jnxNonServiceAffecting(1),
jnxServiceAffecting(2)
}
jnxIfOtn OBJECT IDENTIFIER ::= { jnxIfOtnMib 1 }
jnxIfOtnOCh2 OBJECT IDENTIFIER ::= { jnxIfOtnMib 2 }
--
-- Otn OCh options
jnxIfOtnOChCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOChCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Otn OCh Config Table. "
::= { jnxIfOtn 1 }
jnxIfOtnOChCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOChCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains of the Otn OCh Config Table."
INDEX { jnxIfOtnOChCfgContainerIndex, jnxIfOtnOChCfgL1Index,
jnxIfOtnOChCfgL2Index, jnxIfOtnOChCfgL3Index }
::= { jnxIfOtnOChCfgTable 1 }
JnxIfOtnOChCfgEntry ::=
SEQUENCE {
jnxIfOtnOChCfgContainerIndex
Integer32,
jnxIfOtnOChCfgL1Index
Integer32,
jnxIfOtnOChCfgL2Index
Integer32,
jnxIfOtnOChCfgL3Index
Integer32,
jnxIfOtnLocalLoopback
TruthValue,
jnxIfOtnLineLoopback
TruthValue,
jnxIfOtnPayloadLoopback
TruthValue,
jnxIfOtnAdminState
JnxIfAdminStates,
jnxIfOtnOperState
JnxIfOperStates,
jnxIfOtnIndex
Unsigned32,
jnxIfOtnOChStatus
BITS,
jnxIfOtnOChPortMode
Unsigned32
}
jnxIfOtnOChCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxIfOtnOChCfgEntry 1 }
jnxIfOtnOChCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxIfOtnOChCfgEntry 2 }
jnxIfOtnOChCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxIfOtnOChCfgEntry 3 }
jnxIfOtnOChCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxIfOtnOChCfgEntry 4 }
jnxIfOtnLocalLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the local loopback at the Line (after the optics)."
::= { jnxIfOtnOChCfgEntry 5 }
jnxIfOtnLineLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the line loopback at the Line."
::= { jnxIfOtnOChCfgEntry 6 }
jnxIfOtnPayloadLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Payload loopback before the optics."
::= { jnxIfOtnOChCfgEntry 7 }
jnxIfOtnAdminState OBJECT-TYPE
SYNTAX JnxIfAdminStates
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Admin state of this interface"
::= { jnxIfOtnOChCfgEntry 8 }
jnxIfOtnOperState OBJECT-TYPE
SYNTAX JnxIfOperStates
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of this interface"
::= { jnxIfOtnOChCfgEntry 9 }
jnxIfOtnIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ifIndex of this interface"
::= { jnxIfOtnOChCfgEntry 10 }
jnxIfOtnOChStatus OBJECT-TYPE
SYNTAX BITS {
los(0),
lof(1),
lom(2),
wavelengthlockerr(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface status at the OCh layer."
::= { jnxIfOtnOChCfgEntry 11 }
jnxIfOtnOChPortMode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Mode for this interface
0 - default (not applicable)
1 - lan
2 - wan
3 - gfp
"
::= { jnxIfOtnOChCfgEntry 12 }
-- otn interface options
--
jnxIfOtnOTUkCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOTUkCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Otn OTUk config table. "
::= { jnxIfOtn 2 }
jnxIfOtnOTUkCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOTUkCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains the Otn OTUk config table.
"
INDEX { jnxIfOtnOTUkCfgContainerIndex, jnxIfOtnOTUkCfgL1Index,
jnxIfOtnOTUkCfgL2Index, jnxIfOtnOTUkCfgL3Index }
::= { jnxIfOtnOTUkCfgTable 1 }
JnxIfOtnOTUkCfgEntry ::=
SEQUENCE {
jnxIfOtnOTUkCfgContainerIndex
Integer32,
jnxIfOtnOTUkCfgL1Index
Integer32,
jnxIfOtnOTUkCfgL2Index
Integer32,
jnxIfOtnOTUkCfgL3Index
Integer32,
jnxIfOtnOTUkCfgRate
JnxIfOtnRate,
jnxIfOtnOTUkCfgFecMode
JnxIfOtnFecType,
jnxIfOtnOTUkEnableAutoFrrByteInsert
TruthValue,
jnxIfOtnOTUkEnableBERFrrSupport
TruthValue,
jnxIfOtnOTUkPreFecBERThresholdMantissa
Integer32,
jnxIfOtnOTUkPreFecBERThresholdExponent
Integer32,
jnxIfOtnOTUkPreFecBERThresholdTime
Integer32,
jnxIfOtnOTUkTIMActEnabled
TruthValue,
jnxIfOtnOTUkTxTTI
OCTET STRING,
jnxIfOtnOTUkRxTTI
OCTET STRING,
jnxIfOtnOTUkExpectedRxSapi
OCTET STRING,
jnxIfOtnOTUkExpectedRxDapi
OCTET STRING,
jnxIfOtnOTUkStatus
BITS,
jnxIfOtnOTUkPreFecBERThresholdClearMantissa
Integer32,
jnxIfOtnOTUkPreFecBERThresholdClearExponent
Integer32,
jnxIfOtnOTUkTxSapiTTIFstByteNul
TruthValue,
jnxIfOtnOTUkTxDapiTTIFstByteNul
TruthValue,
jnxIfOtnOTUkExpectedRxSapiFstByteNul
TruthValue,
jnxIfOtnOTUkExpectedRxDapiFstByteNul
TruthValue
}
jnxIfOtnOTUkCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf."
::= { jnxIfOtnOTUkCfgEntry 1 }
jnxIfOtnOTUkCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxIfOtnOTUkCfgEntry 2 }
jnxIfOtnOTUkCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxIfOtnOTUkCfgEntry 3 }
jnxIfOtnOTUkCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxIfOtnOTUkCfgEntry 4 }
jnxIfOtnOTUkCfgRate OBJECT-TYPE
SYNTAX JnxIfOtnRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the rate for the interface and the rates depend
on the interface/fru type.
"
::= { jnxIfOtnOTUkCfgEntry 5 }
jnxIfOtnOTUkCfgFecMode OBJECT-TYPE
SYNTAX JnxIfOtnFecType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the Fec type in the OTU frame and the selection
depends on the interface/fru type. "
::= { jnxIfOtnOTUkCfgEntry 6 }
jnxIfOtnOTUkEnableAutoFrrByteInsert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES) "
::= { jnxIfOtnOTUkCfgEntry 7 }
jnxIfOtnOTUkEnableBERFrrSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will enable/disable the FRR support for BER "
::= { jnxIfOtnOTUkCfgEntry 8 }
jnxIfOtnOTUkPreFecBERThresholdMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.
"
::= { jnxIfOtnOTUkCfgEntry 9 }
jnxIfOtnOTUkPreFecBERThresholdExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.
"
::= { jnxIfOtnOTUkCfgEntry 10 }
jnxIfOtnOTUkPreFecBERThresholdTime OBJECT-TYPE
SYNTAX Integer32
UNITS "ms"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The collection times (1ms - 1sec) to calculate the BER.
"
::= { jnxIfOtnOTUkCfgEntry 11 }
jnxIfOtnOTUkTIMActEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).
"
::= { jnxIfOtnOTUkCfgEntry 12 }
jnxIfOtnOTUkTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined
"
::= { jnxIfOtnOTUkCfgEntry 13 }
jnxIfOtnOTUkRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined
"
::= { jnxIfOtnOTUkCfgEntry 14 }
jnxIfOtnOTUkExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive SAPI.
"
::= { jnxIfOtnOTUkCfgEntry 15 }
jnxIfOtnOTUkExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive DAPI.
"
::= { jnxIfOtnOTUkCfgEntry 16 }
jnxIfOtnOTUkStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
sf(4),
sd(5),
biae(6),
tsf(7),
ssf(8),
fecexcessive(9),
fecdegrade(10),
fefecerr(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface status at the OTUk layer."
::= { jnxIfOtnOTUkCfgEntry 17 }
jnxIfOtnOTUkPreFecBERThresholdClearMantissa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.
"
::= { jnxIfOtnOTUkCfgEntry 18 }
jnxIfOtnOTUkPreFecBERThresholdClearExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.
"
::= { jnxIfOtnOTUkCfgEntry 19 }
jnxIfOtnOTUkTxSapiTTIFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnOTUkCfgEntry 20 }
jnxIfOtnOTUkTxDapiTTIFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnOTUkCfgEntry 21 }
jnxIfOtnOTUkExpectedRxSapiFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnOTUkCfgEntry 22 }
jnxIfOtnOTUkExpectedRxDapiFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnOTUkCfgEntry 23 }
--
-- ODUk config table
--
jnxIfOtnODUkCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnODUkCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Otn ODUk config table. "
::= { jnxIfOtn 3 }
jnxIfOtnODUkCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnODUkCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the
Otn ODUk config.
"
INDEX { jnxIfOtnODUkCfgContainerIndex, jnxIfOtnODUkCfgL1Index,
jnxIfOtnODUkCfgL2Index, jnxIfOtnODUkCfgL3Index
}
::= { jnxIfOtnODUkCfgTable 1 }
JnxIfOtnODUkCfgEntry ::=
SEQUENCE {
jnxIfOtnODUkCfgContainerIndex
Integer32,
jnxIfOtnODUkCfgL1Index
Integer32,
jnxIfOtnODUkCfgL2Index
Integer32,
jnxIfOtnODUkCfgL3Index
Integer32,
jnxIfOtnODUkAPSPCC0
Integer32,
jnxIfOtnODUkAPSPCC1
Integer32,
jnxIfOtnODUkAPSPCC2
Integer32,
jnxIfOtnODUkAPSPCC3
Integer32,
jnxIfOtnODUkPayloadType
Integer32,
jnxIfOtnODUkTIMActEnabled
TruthValue,
jnxIfOtnODUkTxTTI
OCTET STRING,
jnxIfOtnODUkRxTTI
OCTET STRING,
jnxIfOtnODUkExpectedRxSapi
OCTET STRING,
jnxIfOtnODUkExpectedRxDapi
OCTET STRING,
jnxIfOtnODUkStatus
BITS,
jnxIfOtnODUkRxPayloadType
Integer32,
jnxIfOtnODUkTxSapiTTIFstByteNul
TruthValue,
jnxIfOtnODUkTxDapiTTIFstByteNul
TruthValue,
jnxIfOtnODUkExpectedRxSapiFstByteNul
TruthValue,
jnxIfOtnODUkExpectedRxDapiFstByteNul
TruthValue
}
jnxIfOtnODUkCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf.."
::= { jnxIfOtnODUkCfgEntry 1 }
jnxIfOtnODUkCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxIfOtnODUkCfgEntry 2 }
jnxIfOtnODUkCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg
pic slot."
::= { jnxIfOtnODUkCfgEntry 3 }
jnxIfOtnODUkCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxIfOtnODUkCfgEntry 4 }
jnxIfOtnODUkAPSPCC0 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Read/Write APS PCC byte 0 for this ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 5 }
jnxIfOtnODUkAPSPCC1 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Read/Write APS PCC byte 1 for this ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 6 }
jnxIfOtnODUkAPSPCC2 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Read/Write APS PCC byte 2 for this ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 7 }
jnxIfOtnODUkAPSPCC3 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Read/Write APS PCC byte 3 for this ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 8 }
jnxIfOtnODUkPayloadType OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Read/Write Payload Type for ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 9 }
jnxIfOtnODUkTIMActEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).
"
::= { jnxIfOtnODUkCfgEntry 10 }
jnxIfOtnODUkTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnODUkCfgEntry 11 }
jnxIfOtnODUkRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnODUkCfgEntry 12 }
jnxIfOtnODUkExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive SAPI for this layer.
"
::= { jnxIfOtnODUkCfgEntry 13 }
jnxIfOtnODUkExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive DAPI for this layer.
"
::= { jnxIfOtnODUkCfgEntry 14 }
jnxIfOtnODUkStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
sf(4),
sd(5),
biae(6),
tsf(7),
ssf(8),
csf(9),
oci(10),
lck(11),
ltc(12),
ptm(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status at the ODUk layer
Only some of these alarms are valid for the TCM layer
"
::= { jnxIfOtnODUkCfgEntry 15 }
jnxIfOtnODUkRxPayloadType OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Receive Payload Type for ODUk only.
"
::= { jnxIfOtnODUkCfgEntry 16 }
jnxIfOtnODUkTxSapiTTIFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnODUkCfgEntry 17 }
jnxIfOtnODUkTxDapiTTIFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnODUkCfgEntry 18 }
jnxIfOtnODUkExpectedRxSapiFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnODUkCfgEntry 19 }
jnxIfOtnODUkExpectedRxDapiFstByteNul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This will fill the first byte of TTI with all zero
as per the G.709 recommendation.
"
::= { jnxIfOtnODUkCfgEntry 20 }
--
-- TCM Config Table
--
jnxIfOtnTcmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnTcmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Otn TCM config table. "
::= { jnxIfOtn 4 }
jnxIfOtnTcmCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnTcmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the
Otn Tcm config.
"
INDEX { jnxIfOtnTcmCfgContainerIndex, jnxIfOtnTcmCfgL1Index,
jnxIfOtnTcmCfgL2Index, jnxIfOtnTcmCfgL3Index,
jnxIfOtnTcmCfgLevel
}
::= { jnxIfOtnTcmCfgTable 1 }
JnxIfOtnTcmCfgEntry ::=
SEQUENCE {
jnxIfOtnTcmCfgContainerIndex
Integer32,
jnxIfOtnTcmCfgL1Index
Integer32,
jnxIfOtnTcmCfgL2Index
Integer32,
jnxIfOtnTcmCfgL3Index
Integer32,
jnxIfOtnTcmCfgLevel
Integer32,
jnxIfOtnTCMEnable
TruthValue,
jnxIfOtnTcmTxTTI
OCTET STRING,
jnxIfOtnTcmRxTTI
OCTET STRING,
jnxIfOtnTcmExpectedRxSapi
OCTET STRING,
jnxIfOtnTcmExpectedRxDapi
OCTET STRING,
jnxIfOtnTcmStatus
BITS
}
jnxIfOtnTcmCfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf."
::= { jnxIfOtnTcmCfgEntry 1 }
jnxIfOtnTcmCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxIfOtnTcmCfgEntry 2 }
jnxIfOtnTcmCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxIfOtnTcmCfgEntry 3 }
jnxIfOtnTcmCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxIfOtnTcmCfgEntry 4 }
jnxIfOtnTcmCfgLevel OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The TCM level for the Table
"
::= { jnxIfOtnTcmCfgEntry 5 }
jnxIfOtnTCMEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable this TCM layer (only for TCM layers)
"
::= { jnxIfOtnTcmCfgEntry 6 }
jnxIfOtnTcmTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnTcmCfgEntry 7 }
jnxIfOtnTcmRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnTcmCfgEntry 8 }
jnxIfOtnTcmExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive SAPI for this layer.
"
::= { jnxIfOtnTcmCfgEntry 9 }
jnxIfOtnTcmExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Expected receive DAPI for this layer.
"
::= { jnxIfOtnTcmCfgEntry 10 }
jnxIfOtnTcmStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
biae(6),
tsf(7),
ssf(8),
ltc(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The status at the TCM layer.
"
::= { jnxIfOtnTcmCfgEntry 11 }
--
-- ODUK Maintainenance/Test table
--
jnxIfOtnODUkTcmTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnODUkTcmTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Otn ODUk Test function table. "
::= { jnxIfOtn 5 }
jnxIfOtnODUkTcmTestEntry OBJECT-TYPE
SYNTAX JnxIfOtnODUkTcmTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the
Otn ODUk Test function.
"
INDEX { ifIndex, jnxIfOtnODUkTcmTestLayer,
jnxIfOtnODUkTcmTestTCMLevel }
::= { jnxIfOtnODUkTcmTestTable 1 }
JnxIfOtnODUkTcmTestEntry ::=
SEQUENCE {
jnxIfOtnODUkTcmTestLayer
JnxIfOtnLayer,
jnxIfOtnODUkTcmTestTCMLevel
Integer32,
jnxIfOtnODUkTcmInsertAis
TruthValue,
jnxIfOtnODUkTcmInsertLck
TruthValue,
jnxIfOtnODUkTcmInsertOci
TruthValue,
jnxIfOtnODUkPayloadPRBS
TruthValue,
jnxIfOtnODUkPayloadPRBSResult
OCTET STRING
}
jnxIfOtnODUkTcmTestLayer OBJECT-TYPE
SYNTAX JnxIfOtnLayer
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The layer OTU/ODU/TCM layer for the alarm
"
::= { jnxIfOtnODUkTcmTestEntry 1 }
jnxIfOtnODUkTcmTestTCMLevel OBJECT-TYPE
SYNTAX Integer32(0..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
For ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6.
"
::= { jnxIfOtnODUkTcmTestEntry 2 }
jnxIfOtnODUkTcmInsertAis OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Insert ODU Ais into OTN stream.
"
::= { jnxIfOtnODUkTcmTestEntry 3 }
jnxIfOtnODUkTcmInsertLck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Insert ODU Lck into OTN stream.
"
::= { jnxIfOtnODUkTcmTestEntry 4 }
jnxIfOtnODUkTcmInsertOci OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Insert ODU Oci into OTN stream.
"
::= { jnxIfOtnODUkTcmTestEntry 5 }
jnxIfOtnODUkPayloadPRBS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Insert Payload PRBS, For ODUK layer and TCM level is 0.
"
::= { jnxIfOtnODUkTcmTestEntry 6 }
jnxIfOtnODUkPayloadPRBSResult OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Result of the Payload PRBS .
"
::= { jnxIfOtnODUkTcmTestEntry 7 }
--
-- ODUK/TCM Delay Measurement Table
--
jnxIfOtnODUkTcmDMTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnODUkTcmDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Otn ODUk/TCM Delay Measurement config table. "
::= { jnxIfOtn 6 }
jnxIfOtnODUkTcmDMEntry OBJECT-TYPE
SYNTAX JnxIfOtnODUkTcmDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the
Delay Measurement test table.
"
INDEX { ifIndex, jnxIfOtnODUkTcmDMLayer,
jnxIfOtnODUkTcmDMLevel
}
::= { jnxIfOtnODUkTcmDMTable 1 }
JnxIfOtnODUkTcmDMEntry ::=
SEQUENCE {
jnxIfOtnODUkTcmDMLayer
Integer32,
jnxIfOtnODUkTcmDMLevel
Integer32,
jnxIfOtnDMConnectionMonitoringEndpoint
TruthValue,
jnxIfOtnDMBypass
TruthValue,
jnxIfOtnDMPersistFrames
Integer32,
jnxIfOtnDMEnable
TruthValue
}
jnxIfOtnODUkTcmDMLayer OBJECT-TYPE
SYNTAX JnxIfOtnLayer
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The layer OTU/ODU/TCM layer for the alarm
"
::= { jnxIfOtnODUkTcmDMEntry 1 }
jnxIfOtnODUkTcmDMLevel OBJECT-TYPE
SYNTAX Integer32(0..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
For ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6.
"
::= { jnxIfOtnODUkTcmDMEntry 2 }
jnxIfOtnDMConnectionMonitoringEndpoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Originate Connection Monitoring Endpoint for the Delay
Measurement
"
::= { jnxIfOtnODUkTcmDMEntry 3 }
jnxIfOtnDMBypass OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Act as tandem, passing Dm value through node
"
::= { jnxIfOtnODUkTcmDMEntry 4 }
jnxIfOtnDMPersistFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Number of consequtive frames required to declare Dm Complete
"
::= { jnxIfOtnODUkTcmDMEntry 5 }
jnxIfOtnDMEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Start/Stop the DM measurement
"
::= { jnxIfOtnODUkTcmDMEntry 6 }
jnxIfOtnDMRemoteLoopEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Remote Loop Enable/Disable
"
::= { jnxIfOtnODUkTcmDMEntry 7 }
--
-- Notification Trigger Table
--
jnxIfOtnNotificationTrigDefaultHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxIfOtn 7 }
jnxIfOtnNotificationTrigDefaultHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
absent before the alarm is cleared.
"
::= { jnxIfOtn 8 }
jnxIfOtnNotificationTrigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the otn Alarm/Alart/Info trigger table. "
::= { jnxIfOtn 9 }
jnxIfOtnNotificationTrigEntry OBJECT-TYPE
SYNTAX JnxIfOtnNotificationTrigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that contains information about the Otn
Alarm Trigger Table.
"
INDEX { jnxIfOtnNotificationTrigContainerIndex,
jnxIfOtnNotificationTrigL1Index,
jnxIfOtnNotificationTrigL2Index,
jnxIfOtnNotificationTrigL3Index,
jnxIfOtnNotificationTrigLayer,
jnxIfOtnNotificationTrigTCMLevel,
jnxIfOtnNotificationTrigAlmId }
::= { jnxIfOtnNotificationTrigTable 1 }
JnxIfOtnNotificationTrigEntry ::=
SEQUENCE {
jnxIfOtnNotificationTrigContainerIndex
Integer32,
jnxIfOtnNotificationTrigL1Index
Integer32,
jnxIfOtnNotificationTrigL2Index
Integer32,
jnxIfOtnNotificationTrigL3Index
Integer32,
jnxIfOtnNotificationTrigLayer
JnxIfOtnLayer,
jnxIfOtnNotificationTrigTCMLevel
Integer32,
jnxIfOtnNotificationTrigAlmId
Integer32,
jnxIfOtnNotificationTrigSeverity
JnxIfOtnSeverity,
jnxIfOtnNotificationTrigIgnore
TruthValue,
jnxIfOtnNotificationTrigHoldtimeUp
Integer32,
jnxIfOtnNotificationTrigHoldtimeDown
Integer32,
jnxIfOtnTrigServiceStateAction
JnxIfOtnServiceStateAction
}
jnxIfOtnNotificationTrigContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex - eg shelf."
::= { jnxIfOtnNotificationTrigEntry 1 }
jnxIfOtnNotificationTrigL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level one index associated with this subject ... eg fpc
slot."
::= { jnxIfOtnNotificationTrigEntry 2 }
jnxIfOtnNotificationTrigL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level two index associated with this subject .. eg pic
slot."
::= { jnxIfOtnNotificationTrigEntry 3 }
jnxIfOtnNotificationTrigL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The level three index associated with this subject..
eg port.
"
::= { jnxIfOtnNotificationTrigEntry 4 }
jnxIfOtnNotificationTrigLayer OBJECT-TYPE
SYNTAX JnxIfOtnLayer
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The layer OTU/ODU/TCM layer for the alarm
"
::= { jnxIfOtnNotificationTrigEntry 5 }
jnxIfOtnNotificationTrigTCMLevel OBJECT-TYPE
SYNTAX Integer32(0..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
For OCh/OTUk/ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6.
"
::= { jnxIfOtnNotificationTrigEntry 6 }
jnxIfOtnNotificationTrigAlmId OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This will be the ID of Alarm for that layer
'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'.
"
::= { jnxIfOtnNotificationTrigEntry 7 }
jnxIfOtnNotificationTrigSeverity OBJECT-TYPE
SYNTAX JnxIfOtnSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This will be the Severity of the Notification for that layer.
"
::= { jnxIfOtnNotificationTrigEntry 8 }
jnxIfOtnNotificationTrigIgnore OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will ignore the alarm when set.
"
::= { jnxIfOtnNotificationTrigEntry 9 }
jnxIfOtnNotificationTrigHoldtimeUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect to
persist before it is declared an alarm.
"
::= { jnxIfOtnNotificationTrigEntry 10 }
jnxIfOtnNotificationTrigHoldtimeDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object will indicate the time (ms) for the defect is
absent before the alarm is cleared.
"
::= { jnxIfOtnNotificationTrigEntry 11 }
jnxIfOtnTrigServiceStateAction OBJECT-TYPE
SYNTAX JnxIfOtnServiceStateAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This will indicate whether this alarm is service affecting
or not .
"
::= { jnxIfOtnNotificationTrigEntry 12 }
-- Clear for all Performance monitoring counters on this interface
--
jnxOtnClearAllPMs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" To clear all Performance monitoring counters on OTN
interfaces "
::= { jnxIfOtn 10 }
jnxOtnClearInterfacePMs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" To clear all Performance monitoring counters on this OTN
interfaces "
::= { jnxIfOtn 11 }
jnxOtnClearInterfaceCurrentPM OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" To clear the current Performance monitoring counters on
this OTN interfaces "
::= { jnxIfOtn 12 }
-- Clear PM's for Interfaces
jnxOtnClearIfPMsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOtnClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" To clear OTN Performance monitoring counters on this OTN
interfaces "
::= { jnxIfOtn 13 }
jnxOtnClearIfPMsEntry OBJECT-TYPE
SYNTAX JnxOtnClearIfPMsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row that s used to clear the OTN PM Table."
INDEX { ifIndex }
::= { jnxOtnClearIfPMsTable 1 }
JnxOtnClearIfPMsEntry ::=
SEQUENCE {
jnxOtnClearCurrent
TruthValue,
jnxOtnClearInterfaceInterval
TruthValue,
jnxOtnClearInterfaceDay
TruthValue,
jnxOtnClearInterfaceAll
TruthValue
}
jnxOtnClearCurrent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the current OTN PM's for this interface
"
::= { jnxOtnClearIfPMsEntry 1 }
jnxOtnClearInterfaceInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1- to clear all the OTN PM's intervals(1-96) for this
interface
"
::= { jnxOtnClearIfPMsEntry 2 }
jnxOtnClearInterfaceDay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the Current Day and Previous Day OTN PM's
for this interface
"
::= { jnxOtnClearIfPMsEntry 3 }
jnxOtnClearInterfaceAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1 - to clear all the OTN PM's for this interface
"
::= { jnxOtnClearIfPMsEntry 4 }
-- Otn OCh2 options
--
jnxIfOtnOCh2CfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOCh2CfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn OCh2 Config Table. "
::= { jnxIfOtnOCh2 1 }
jnxIfOtnOCh2CfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOCh2CfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A conceptual row that contains of the Otn OCh2 Config Table."
INDEX { jnxIfOtnOCh2CfgContainerIndex, jnxIfOtnOCh2CfgL1Index,
jnxIfOtnOCh2CfgL2Index, jnxIfOtnOCh2CfgL3Index,
jnxIfOtnOCh2CfgL4Index }
::= { jnxIfOtnOCh2CfgTable 1 }
JnxIfOtnOCh2CfgEntry ::=
SEQUENCE {
jnxIfOtnOCh2CfgContainerIndex
Integer32,
jnxIfOtnOCh2CfgL1Index
Integer32,
jnxIfOtnOCh2CfgL2Index
Integer32,
jnxIfOtnOCh2CfgL3Index
Integer32,
jnxIfOtnOCh2CfgL4Index
Integer32,
jnxIfOtnOCh2LocalLoopback
TruthValue,
jnxIfOtnOCh2LineLoopback
TruthValue,
jnxIfOtnOCh2PayloadLoopback
TruthValue,
jnxIfOtnOCh2AdminState
JnxIfAdminStates,
jnxIfOtnOCh2OperState
JnxIfOperStates,
jnxIfOtnOCh2Index
Unsigned32,
jnxIfOtnOCh2Status
BITS,
jnxIfOtnOCh2PortMode
Unsigned32
}
jnxIfOtnOCh2CfgContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Container Index associated with the object instance."
::= { jnxIfOtnOCh2CfgEntry 1 }
jnxIfOtnOCh2CfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC slot number of the interface."
::= { jnxIfOtnOCh2CfgEntry 2 }
jnxIfOtnOCh2CfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC slot number of the interface."
::= { jnxIfOtnOCh2CfgEntry 3 }
jnxIfOtnOCh2CfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface."
::= { jnxIfOtnOCh2CfgEntry 4 }
jnxIfOtnOCh2CfgL4Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Sub-Port number of the interface."
::= { jnxIfOtnOCh2CfgEntry 5 }
jnxIfOtnOCh2LocalLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the local loopback at the Line (after the optics)."
::= { jnxIfOtnOCh2CfgEntry 6 }
jnxIfOtnOCh2LineLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the line loopback at the Line."
::= { jnxIfOtnOCh2CfgEntry 7 }
jnxIfOtnOCh2PayloadLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the Payload loopback before the optics."
::= { jnxIfOtnOCh2CfgEntry 8 }
jnxIfOtnOCh2AdminState OBJECT-TYPE
SYNTAX JnxIfAdminStates
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The Admin state of this interface"
::= { jnxIfOtnOCh2CfgEntry 9 }
jnxIfOtnOCh2OperState OBJECT-TYPE
SYNTAX JnxIfOperStates
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The operational state of this interface"
::= { jnxIfOtnOCh2CfgEntry 10 }
jnxIfOtnOCh2Index OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The interface ifIndex of this interface"
::= { jnxIfOtnOCh2CfgEntry 11 }
jnxIfOtnOCh2Status OBJECT-TYPE
SYNTAX BITS {
los(0),
lof(1),
lom(2),
wavelengthlockerr(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface status at the OCh layer."
::= { jnxIfOtnOCh2CfgEntry 12 }
jnxIfOtnOCh2PortMode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The Port Mode for this interface
0 - default (not applicable)
1 - lan
2 - wan
3 - gfp
"
::= { jnxIfOtnOCh2CfgEntry 13 }
-- otn ch2 interface options
--
jnxIfOtnOCh2OTUkCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOCh2OTUkCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn OCh2 OTUk config table. "
::= { jnxIfOtnOCh2 2 }
jnxIfOtnOCh2OTUkCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOCh2OTUkCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A conceptual row that contains the Otn OCh2 OTUk config table.
"
INDEX { jnxIfOtnOCh2OTUkCfgContIndx, jnxIfOtnOCh2OTUkCfgL1Index,
jnxIfOtnOCh2OTUkCfgL2Index, jnxIfOtnOCh2OTUkCfgL3Index,
jnxIfOtnOCh2OTUkCfgL4Index }
::= { jnxIfOtnOCh2OTUkCfgTable 1 }
JnxIfOtnOCh2OTUkCfgEntry ::=
SEQUENCE {
jnxIfOtnOCh2OTUkCfgContIndx
Integer32,
jnxIfOtnOCh2OTUkCfgL1Index
Integer32,
jnxIfOtnOCh2OTUkCfgL2Index
Integer32,
jnxIfOtnOCh2OTUkCfgL3Index
Integer32,
jnxIfOtnOCh2OTUkCfgL4Index
Integer32,
jnxIfOtnOCh2OTUkCfgRate
JnxIfOtnRate,
jnxIfOtnOCh2OTUkCfgFecMode
JnxIfOtnFecType,
jnxIfOtnOCh2OTUkEnAutoFrrByteIns
TruthValue,
jnxIfOtnOCh2OTUkEnBERFrrSupport
TruthValue,
jnxIfOtnOCh2OTUkPreFecBERThMant
Integer32,
jnxIfOtnOCh2OTUkPreFecBERThExpo
Integer32,
jnxIfOtnOCh2OTUkPreFecBERThTime
Integer32,
jnxIfOtnOCh2OTUkTIMActEnabled
TruthValue,
jnxIfOtnOCh2OTUkTxTTI
OCTET STRING,
jnxIfOtnOCh2OTUkRxTTI
OCTET STRING,
jnxIfOtnOCh2OTUkExpectedRxSapi
OCTET STRING,
jnxIfOtnOCh2OTUkExpectedRxDapi
OCTET STRING,
jnxIfOtnOCh2OTUkStatus
BITS,
jnxIfOtnOCh2OTUkPreFecBERThClrMn
Integer32,
jnxIfOtnOCh2OTUkPreFecBERThClrEx
Integer32
}
jnxIfOtnOCh2OTUkCfgContIndx OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Container Index associated with the object instance. "
::= { jnxIfOtnOCh2OTUkCfgEntry 1 }
jnxIfOtnOCh2OTUkCfgL1Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC slot number of the interface. "
::= { jnxIfOtnOCh2OTUkCfgEntry 2 }
jnxIfOtnOCh2OTUkCfgL2Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC slot number of the interface. "
::= { jnxIfOtnOCh2OTUkCfgEntry 3 }
jnxIfOtnOCh2OTUkCfgL3Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface. "
::= { jnxIfOtnOCh2OTUkCfgEntry 4 }
jnxIfOtnOCh2OTUkCfgL4Index OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface. "
::= { jnxIfOtnOCh2OTUkCfgEntry 5 }
jnxIfOtnOCh2OTUkCfgRate OBJECT-TYPE
SYNTAX JnxIfOtnRate
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This is the rate for the interface and the rates depend
on the interface/fru type.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 6 }
jnxIfOtnOCh2OTUkCfgFecMode OBJECT-TYPE
SYNTAX JnxIfOtnFecType
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This is the Fec type in the OTU frame and the selection
depends on the interface/fru type. "
::= { jnxIfOtnOCh2OTUkCfgEntry 7 }
jnxIfOtnOCh2OTUkEnAutoFrrByteIns OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES) "
::= { jnxIfOtnOCh2OTUkCfgEntry 8 }
jnxIfOtnOCh2OTUkEnBERFrrSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will enable/disable the FRR support for BER "
::= { jnxIfOtnOCh2OTUkCfgEntry 9 }
jnxIfOtnOCh2OTUkPreFecBERThMant OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 10 }
jnxIfOtnOCh2OTUkPreFecBERThExpo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 11 }
jnxIfOtnOCh2OTUkPreFecBERThTime OBJECT-TYPE
SYNTAX Integer32
UNITS "ms"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The collection times (1ms - 1sec) to calculate the BER.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 12 }
jnxIfOtnOCh2OTUkTIMActEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).
"
::= { jnxIfOtnOCh2OTUkCfgEntry 13 }
jnxIfOtnOCh2OTUkTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined
"
::= { jnxIfOtnOCh2OTUkCfgEntry 14 }
jnxIfOtnOCh2OTUkRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined
"
::= { jnxIfOtnOCh2OTUkCfgEntry 15 }
jnxIfOtnOCh2OTUkExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive SAPI.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 16 }
jnxIfOtnOCh2OTUkExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive DAPI.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 17 }
jnxIfOtnOCh2OTUkStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
sf(4),
sd(5),
biae(6),
tsf(7),
ssf(8),
fecexcessive(9),
fecdegrade(10)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The interface status at the OTUk layer."
::= { jnxIfOtnOCh2OTUkCfgEntry 18 }
jnxIfOtnOCh2OTUkPreFecBERThClrMn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 19 }
jnxIfOtnOCh2OTUkPreFecBERThClrEx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
" This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.
"
::= { jnxIfOtnOCh2OTUkCfgEntry 20 }
--
-- ODUk config table
--
jnxIfOtnOCh2ODUkCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOCh2ODUkCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn ODUk config table. "
::= { jnxIfOtnOCh2 3 }
jnxIfOtnOCh2ODUkCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOCh2ODUkCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A conceptual row that contains information about the
Otn ODUk config.
"
INDEX { jnxIfOtnOCh2ODUkCfgContIndx, jnxIfOtnOCh2ODUkCfgL1Index,
jnxIfOtnOCh2ODUkCfgL2Index, jnxIfOtnOCh2ODUkCfgL3Index,
jnxIfOtnOCh2ODUkCfgL4Index }
::= { jnxIfOtnOCh2ODUkCfgTable 1 }
JnxIfOtnOCh2ODUkCfgEntry ::=
SEQUENCE {
jnxIfOtnOCh2ODUkCfgContIndx
Integer32,
jnxIfOtnOCh2ODUkCfgL1Index
Integer32,
jnxIfOtnOCh2ODUkCfgL2Index
Integer32,
jnxIfOtnOCh2ODUkCfgL3Index
Integer32,
jnxIfOtnOCh2ODUkCfgL4Index
Integer32,
jnxIfOtnOCh2ODUkAPSPCC0
Integer32,
jnxIfOtnOCh2ODUkAPSPCC1
Integer32,
jnxIfOtnOCh2ODUkAPSPCC2
Integer32,
jnxIfOtnOCh2ODUkAPSPCC3
Integer32,
jnxIfOtnOCh2ODUkPayloadType
Integer32,
jnxIfOtnOCh2ODUkTIMActEnabled
TruthValue,
jnxIfOtnOCh2ODUkTxTTI
OCTET STRING,
jnxIfOtnOCh2ODUkRxTTI
OCTET STRING,
jnxIfOtnOCh2ODUkExpectedRxSapi
OCTET STRING,
jnxIfOtnOCh2ODUkExpectedRxDapi
OCTET STRING,
jnxIfOtnOCh2ODUkStatus
BITS,
jnxIfOtnOCh2ODUkRxPayloadType
Integer32
}
jnxIfOtnOCh2ODUkCfgContIndx OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Container Index associated with the Object Instance. "
::= { jnxIfOtnOCh2ODUkCfgEntry 1 }
jnxIfOtnOCh2ODUkCfgL1Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC slot number of the interface. "
::= { jnxIfOtnOCh2ODUkCfgEntry 2 }
jnxIfOtnOCh2ODUkCfgL2Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC slot number of the interface. "
::= { jnxIfOtnOCh2ODUkCfgEntry 3 }
jnxIfOtnOCh2ODUkCfgL3Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface. "
::= { jnxIfOtnOCh2ODUkCfgEntry 4 }
jnxIfOtnOCh2ODUkCfgL4Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Sub-Port number of the interface. "
::= { jnxIfOtnOCh2ODUkCfgEntry 5 }
jnxIfOtnOCh2ODUkAPSPCC0 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Read/Write APS PCC byte 0 for this ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 6 }
jnxIfOtnOCh2ODUkAPSPCC1 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Read/Write APS PCC byte 1 for this ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 7 }
jnxIfOtnOCh2ODUkAPSPCC2 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Read/Write APS PCC byte 2 for this ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 8 }
jnxIfOtnOCh2ODUkAPSPCC3 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Read/Write APS PCC byte 3 for this ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 9 }
jnxIfOtnOCh2ODUkPayloadType OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Read/Write Payload Type for ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 10 }
jnxIfOtnOCh2ODUkTIMActEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2).
"
::= { jnxIfOtnOCh2ODUkCfgEntry 11 }
jnxIfOtnOCh2ODUkTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 12 }
jnxIfOtnOCh2ODUkRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 13 }
jnxIfOtnOCh2ODUkExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive SAPI for this layer.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 14 }
jnxIfOtnOCh2ODUkExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive DAPI for this layer.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 15 }
jnxIfOtnOCh2ODUkStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
sf(4),
sd(5),
biae(6),
tsf(7),
ssf(8),
csf(9),
oci(10),
lck(11),
ltc(12),
ptm(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status at the ODUk layer
Only some of these alarms are valid for the TCM layer
"
::= { jnxIfOtnOCh2ODUkCfgEntry 16 }
jnxIfOtnOCh2ODUkRxPayloadType OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Receive Payload Type for ODUk only.
"
::= { jnxIfOtnOCh2ODUkCfgEntry 17 }
--
-- TCM Config Table
--
jnxIfOtnOCh2TcmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxIfOtnOCh2TcmCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the Otn TCM config table. "
::= { jnxIfOtnOCh2 4 }
jnxIfOtnOCh2TcmCfgEntry OBJECT-TYPE
SYNTAX JnxIfOtnOCh2TcmCfgEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A conceptual row that contains information about the
Otn Tcm config.
"
INDEX { jnxIfOtnOCh2TcmCfgContIndx, jnxIfOtnOCh2TcmCfgL1Index,
jnxIfOtnOCh2TcmCfgL2Index, jnxIfOtnOCh2TcmCfgL3Index,
jnxIfOtnOCh2TcmCfgL4Index, jnxIfOtnOCh2TcmCfgLevel }
::= { jnxIfOtnOCh2TcmCfgTable 1 }
JnxIfOtnOCh2TcmCfgEntry ::=
SEQUENCE {
jnxIfOtnOCh2TcmCfgContIndx
Integer32,
jnxIfOtnOCh2TcmCfgL1Index
Integer32,
jnxIfOtnOCh2TcmCfgL2Index
Integer32,
jnxIfOtnOCh2TcmCfgL3Index
Integer32,
jnxIfOtnOCh2TcmCfgL4Index
Integer32,
jnxIfOtnOCh2TcmCfgLevel
Integer32,
jnxIfOtnOCh2TCMEnable
TruthValue,
jnxIfOtnOCh2TcmTxTTI
OCTET STRING,
jnxIfOtnOCh2TcmRxTTI
OCTET STRING,
jnxIfOtnOCh2TcmExpectedRxSapi
OCTET STRING,
jnxIfOtnOCh2TcmExpectedRxDapi
OCTET STRING,
jnxIfOtnOCh2TcmStatus
BITS
}
jnxIfOtnOCh2TcmCfgContIndx OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Container Index associated with the object."
::= { jnxIfOtnOCh2TcmCfgEntry 1 }
jnxIfOtnOCh2TcmCfgL1Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"FPC slot number of the interface."
::= { jnxIfOtnOCh2TcmCfgEntry 2 }
jnxIfOtnOCh2TcmCfgL2Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"PIC slot number of the interface."
::= { jnxIfOtnOCh2TcmCfgEntry 3 }
jnxIfOtnOCh2TcmCfgL3Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Port number of the interface."
::= { jnxIfOtnOCh2TcmCfgEntry 4 }
jnxIfOtnOCh2TcmCfgL4Index OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Sub-Port number of the interface."
::= { jnxIfOtnOCh2TcmCfgEntry 5 }
jnxIfOtnOCh2TcmCfgLevel OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
The TCM level for the Table
"
::= { jnxIfOtnOCh2TcmCfgEntry 6 }
jnxIfOtnOCh2TCMEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Enable this TCM layer (only for TCM layers)
"
::= { jnxIfOtnOCh2TcmCfgEntry 7 }
jnxIfOtnOCh2TcmTxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnOCh2TcmCfgEntry 8 }
jnxIfOtnOCh2TcmRxTTI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined for this layer.
"
::= { jnxIfOtnOCh2TcmCfgEntry 9 }
jnxIfOtnOCh2TcmExpectedRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive SAPI for this layer.
"
::= { jnxIfOtnOCh2TcmCfgEntry 10 }
jnxIfOtnOCh2TcmExpectedRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Expected receive DAPI for this layer.
"
::= { jnxIfOtnOCh2TcmCfgEntry 11 }
jnxIfOtnOCh2TcmStatus OBJECT-TYPE
SYNTAX BITS {
ais(0),
bdi(1),
iae(2),
ttim(3),
biae(6),
tsf(7),
ssf(8),
ltc(9)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The status at the TCM layer.
"
::= { jnxIfOtnOCh2TcmCfgEntry 12 }
--
-- Configuration Management Notifications
--
jnxIfOtnNotificationPrefix OBJECT IDENTIFIER ::= { jnxIfOtnNotifications 0 }
jnxIfOtnNotificationAdminStatus NOTIFICATION-TYPE
OBJECTS {
ifDescr,
jnxIfOtnAdminState
}
STATUS current
DESCRIPTION
"Notification of the admin state of the otn interface."
::= { jnxIfOtnNotificationPrefix 1 }
jnxIfOtnNotificationOperStatus NOTIFICATION-TYPE
OBJECTS {
ifDescr,
jnxIfOtnOperState
}
STATUS current
DESCRIPTION
"Notification of operational state of the otn interface"
::= { jnxIfOtnNotificationPrefix 2 }
END
Reference in New Issue Copy Permalink