mibs/MIBS/junos/JUNIPER-RPF-MIB

109 lines
3.4 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Juniper Enterprise Specific MIB: Reverse Path Forwarding MIB
--
-- Copyright (c) 2002-2003, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-RPF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter64
FROM SNMPv2-SMI -- RFC 2578
InterfaceIndex
FROM IF-MIB -- RFC 2863
jnxMibs
FROM JUNIPER-SMI;
jnxRpf MODULE-IDENTITY
LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:59 2003 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' enterprise-specific MIB for
Reverse Path Forwarding (RPF)"
REVISION "200202250000Z"
DESCRIPTION
"Initial revision"
::= { jnxMibs 17 }
jnxRpfStats OBJECT IDENTIFIER ::= { jnxRpf 1 }
jnxRpfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxRpfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics for traffic that is rejected
due to RPF processing."
::= { jnxRpfStats 1 }
jnxRpfStatsEntry OBJECT-TYPE
SYNTAX JnxRpfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table counts RPF-rejected traffic that
is received on a particular interface and belongs to a
particular address family."
INDEX { jnxRpfStatsIfIndex, jnxRpfStatsAddrFamily }
::= { jnxRpfStatsTable 1 }
JnxRpfStatsEntry ::=
SEQUENCE {
jnxRpfStatsIfIndex InterfaceIndex,
jnxRpfStatsAddrFamily INTEGER,
jnxRpfStatsPackets Counter64,
jnxRpfStatsBytes Counter64
}
jnxRpfStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ingress interface for traffic that is counted in this
RpfStats entry."
::= { jnxRpfStatsEntry 1 }
jnxRpfStatsAddrFamily OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family of this entry's traffic."
::= { jnxRpfStatsEntry 2 }
jnxRpfStatsPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on this interface, belonging
to this address family, that have been rejected due to RPF
processing."
::= { jnxRpfStatsEntry 3 }
jnxRpfStatsBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received on this interface, belonging
to this address family, that have been rejected due to RPF
processing."
::= { jnxRpfStatsEntry 4 }
END