6446 lines
246 KiB
Plaintext
6446 lines
246 KiB
Plaintext
|
--
|
||
|
|
-- Juniper Enterprise Specific MIB: SOAM
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2012-2013, Juniper Networks, Inc.
|
||
|
|
-- All rights reserved.
|
||
|
|
--
|
||
|
|
-- The contents of this document are subject to change without notice.
|
||
|
|
--
|
||
|
|
|
||
|
|
JUNIPER-SOAM-PM-MIB DEFINITIONS ::= BEGIN
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
NOTIFICATION-TYPE,
|
||
|
|
Integer32, Counter32, Counter64,
|
||
|
|
Unsigned32,Gauge32 FROM SNMPv2-SMI -- [RFC2578]
|
||
|
|
TEXTUAL-CONVENTION,
|
||
|
|
TimeInterval,
|
||
|
|
TimeStamp, RowStatus,
|
||
|
|
TruthValue, MacAddress,
|
||
|
|
TDomain, TAddress, DateAndTime FROM SNMPv2-TC -- [RFC2579]
|
||
|
|
MODULE-COMPLIANCE,
|
||
|
|
OBJECT-GROUP,
|
||
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
|
||
|
|
InterfaceIndex,
|
||
|
|
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
|
||
|
|
LldpChassisId,
|
||
|
|
LldpChassisIdSubtype,
|
||
|
|
LldpPortId,
|
||
|
|
LldpPortIdSubtype FROM LLDP-MIB -- [IEEExxx]
|
||
|
|
ieee802dot1mibs,
|
||
|
|
IEEE8021VlanIndex FROM IEEE8021-TC-MIB
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
dot1agCfmMepEntry,
|
||
|
|
Dot1afCfmIndexIntegerNextFree,
|
||
|
|
Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB
|
||
|
|
jnxMibs FROM JUNIPER-SMI
|
||
|
|
IEEE8021PriorityValue FROM IEEE8021-TC-MIB
|
||
|
|
;
|
||
|
|
|
||
|
|
jnxSoamPmMib MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201605310000Z" -- Tue May 31 00:00:00 2016 UTC
|
||
|
|
ORGANIZATION "Juniper Networks, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Juniper Technical Assistance Center
|
||
|
|
Juniper Networks, Inc.
|
||
|
|
1133 Innovation Way
|
||
|
|
Sunnyvale, CA 94089
|
||
|
|
E-mail: support@juniper.net"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB module contains the management objects for the
|
||
|
|
management of Ethernet Services Operations, Administration
|
||
|
|
and Maintenance for Performance Monitoring.
|
||
|
|
"
|
||
|
|
REVISION "201201131200Z" -- January 13, 2012
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial Version."
|
||
|
|
|
||
|
|
REVISION "201605310000Z" -- 31-May-16
|
||
|
|
DESCRIPTION
|
||
|
|
"Removed duplicate entries"
|
||
|
|
|
||
|
|
::= { jnxMibs 78 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Object definitions in the SOAM PM MIB Module
|
||
|
|
-- *****************************************************************************
|
||
|
|
jnxSoamPmNotifications OBJECT IDENTIFIER ::= { jnxSoamPmMib 0 }
|
||
|
|
jnxSoamPmMibObjects OBJECT IDENTIFIER ::= { jnxSoamPmMib 1 }
|
||
|
|
jnxSoamPmMibConformance OBJECT IDENTIFIER ::= { jnxSoamPmMib 2 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Groups in the SOAM PM MIB Module
|
||
|
|
-- *****************************************************************************
|
||
|
|
jnxSoamPmMep OBJECT IDENTIFIER ::= { jnxSoamPmMibObjects 1 }
|
||
|
|
jnxSoamPmLmObjects OBJECT IDENTIFIER ::= { jnxSoamPmMibObjects 2 }
|
||
|
|
jnxSoamPmDmObjects OBJECT IDENTIFIER ::= { jnxSoamPmMibObjects 3 }
|
||
|
|
jnxSoamPmNotificationCfg OBJECT IDENTIFIER ::= { jnxSoamPmMibObjects 4 }
|
||
|
|
jnxSoamPmNotificationObj OBJECT IDENTIFIER ::= { jnxSoamPmMibObjects 5 }
|
||
|
|
|
||
|
|
-- ******************************************************************
|
||
|
|
-- Textual conventions
|
||
|
|
-- ******************************************************************
|
||
|
|
|
||
|
|
|
||
|
|
JnxSoamTcTestPatternType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type indicates the type of test pattern to be
|
||
|
|
sent in an OAM PDU Test TLV.
|
||
|
|
The valid enumerated values associated with this type are:
|
||
|
|
null(1) Null signal without CRC-32
|
||
|
|
nullCrc32(2) Null signal with CRC-32
|
||
|
|
prbs(3) PRBS 2^31-1 without CRC-32
|
||
|
|
prbsCrc32(4) PRBS 2^31-1 with CRC-32
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF7.1], Appendix III.2 Enumeration, [Y.1731] 7.7"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
null(1),
|
||
|
|
nullCrc32(2),
|
||
|
|
prbs(3),
|
||
|
|
prbsCrc32(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
JnxSoamTcDataPatternType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type indicates the type of data pattern to be
|
||
|
|
sent in an OAM PDU Data TLV.
|
||
|
|
The valid enumerated values associated with this type are:
|
||
|
|
zeroPattern(1) indicates the Data TLV contains all zeros
|
||
|
|
onesPattern(2) indicates the Data TLV contains all ones
|
||
|
|
"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
zeroPattern(1),
|
||
|
|
onesPattern(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
JnxSoamTcOperationTimeType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type indicates the operation type start
|
||
|
|
or end time to indicate when an OAM operation is
|
||
|
|
initiated or stopped.
|
||
|
|
The valid enumerated values associated with this type are:
|
||
|
|
none(1) The operation is never started or is stopped immediately
|
||
|
|
if used to indicate a start time, or the operation never
|
||
|
|
ends if it is used to indicate an end time
|
||
|
|
immediate(2) The operation is to begin immediately
|
||
|
|
relative(3) The operation is to begin at a relative time from the
|
||
|
|
current time or stop a relative time after it has started
|
||
|
|
fixed(4) The operation is to begin/stop at the given UTC time/date
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[SOAM-PM] R2, [SOAM-FM] 8.7"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
immediate(2),
|
||
|
|
relative(3),
|
||
|
|
fixed(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
JnxSoamTcAvailabilityType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type defines the availability of a session,
|
||
|
|
measured by a loss measurement session. The valid enumerated values
|
||
|
|
associated with this type are:
|
||
|
|
available(1) indicates the MEP is available.
|
||
|
|
unavailable(2) indicates the MEP is unavailable.
|
||
|
|
unknown(3) indicates the availability is not known, for
|
||
|
|
instance because insufficient time has passed to
|
||
|
|
make an availability calculation, the time has been
|
||
|
|
excluded because of a maintenance interval, or because
|
||
|
|
availability measurement is not enabled.
|
||
|
|
"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
available(1),
|
||
|
|
unavailable(2),
|
||
|
|
unknown(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
JnxSoamTcDelayMeasurementBinType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type is used to distinguish between
|
||
|
|
measurement bins for Frame Delay, Frame Delay Range, and
|
||
|
|
Inter-frame Delay variation.
|
||
|
|
|
||
|
|
The valid enumerated values associated with this type are:
|
||
|
|
|
||
|
|
twoWayFrameDelay(1) indicates a measurement bin for two-way
|
||
|
|
Frame Delay.
|
||
|
|
forwardFrameDelay(2) indicates a measurement bin for one-way
|
||
|
|
Frame Delay in the forward direction.
|
||
|
|
backwardFrameDelay(3) indicates a measurement bin for one-way
|
||
|
|
Frame Delay in the backward direction.
|
||
|
|
twoWayIfdv(4) indicates a measurement bin for two-way
|
||
|
|
Inter-frame Delay Variation.
|
||
|
|
forwardIfdv(5) indicates a measurement bin for one-way
|
||
|
|
Inter-frame Delay Variation in the forward
|
||
|
|
direction.
|
||
|
|
backwardIfdv(6) indicates a measurement bin for one-way
|
||
|
|
Inter-frame Delay Variation in the backward
|
||
|
|
direction.
|
||
|
|
twoWayFrameDelayRange(7) indicates a measurement bin for two-way
|
||
|
|
Frame Delay Range.
|
||
|
|
forwardFrameDelayRange(8) indicates a measurement bin for one-way
|
||
|
|
Frame Delay Range in the forward direction.
|
||
|
|
backwardFrameDelayRange(9) indicates a measurement bin for one-way
|
||
|
|
Frame Delay Range in the backward direction.
|
||
|
|
"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
twoWayFrameDelay(1),
|
||
|
|
forwardFrameDelay(2),
|
||
|
|
backwardFrameDelay(3),
|
||
|
|
twoWayIfdv(4),
|
||
|
|
forwardIfdv(5),
|
||
|
|
backwardIfdv(6),
|
||
|
|
twoWayFrameDelayRange(7),
|
||
|
|
forwardFrameDelayRange(8),
|
||
|
|
backwardFrameDelayRange(9)
|
||
|
|
}
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet MEP Performance Monitoring Configuration
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamPmMepTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamPmMepEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table is an extension of the dot1agCfmMepTable and rows
|
||
|
|
are automatically added or deleted from this table based upon row
|
||
|
|
creation and destruction of the dot1agCfmMepTable.
|
||
|
|
|
||
|
|
This table represents the local MEP PM configuration table. The
|
||
|
|
primary purpose of this table is provide local parameters for the
|
||
|
|
SOAM PM function found in [Y.1731] and [MEF SOAM-PM] and instantiated
|
||
|
|
at a MEP.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731], [MEF SOAM-PM]"
|
||
|
|
::= { jnxSoamPmMep 1 }
|
||
|
|
|
||
|
|
jnxSoamPmMepEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamPmMepEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamPmMepTable."
|
||
|
|
AUGMENTS {
|
||
|
|
dot1agCfmMepEntry
|
||
|
|
}
|
||
|
|
--INDEX { dot1agCfmMdIndex,
|
||
|
|
-- dot1agCfmMaIndex,
|
||
|
|
-- dot1agCfmMepIdentifier
|
||
|
|
-- }
|
||
|
|
::= { jnxSoamPmMepTable 1 }
|
||
|
|
|
||
|
|
JnxSoamPmMepEntry ::= SEQUENCE {
|
||
|
|
jnxSoamPmMepOperNextIndex Dot1afCfmIndexIntegerNextFree,
|
||
|
|
jnxSoamPmMepLmSingleEndedResponder TruthValue,
|
||
|
|
jnxSoamPmMepSlmSingleEndedResponder TruthValue,
|
||
|
|
jnxSoamPmMepDmSingleEndedResponder TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamPmMepOperNextIndex OBJECT-TYPE
|
||
|
|
SYNTAX Dot1afCfmIndexIntegerNextFree
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains an unused value for a PM session number on a
|
||
|
|
MEP that can be used for either LM or DM sessions, or a zero to
|
||
|
|
indicate that none exist. This value needs to be read in order to
|
||
|
|
find an available index for row-creation of a PM session on a MEP and
|
||
|
|
then used when a row is created. This value is automatically updated
|
||
|
|
by the SNMP Agent after the row is created.
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never to be reused for other PM sessions on the same MEP while this
|
||
|
|
session is active, or until it wraps to zero. The index value keeps
|
||
|
|
increasing up to that time. This is to facilitate access control based
|
||
|
|
on a fixed index for an EMS, since the index is not reused.
|
||
|
|
|
||
|
|
This object is an extension of the dot1agCfmMepTable and the object is
|
||
|
|
automatically added or deleted based upon row creation and destruction
|
||
|
|
of the dot1agCfmMepTable.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmMepEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamPmMepLmSingleEndedResponder OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Loss Measurement (LMM) single-ended
|
||
|
|
Responder is enabled.
|
||
|
|
|
||
|
|
The value 'true' indicates the single-ended Loss Measurement Responder
|
||
|
|
is enabled and if a LMM message is received a LMR will be sent in reply.
|
||
|
|
|
||
|
|
The value 'false' indicates the single-ended Loss Measurement Responder
|
||
|
|
is disabled. If a LMM message is received no response will be sent and
|
||
|
|
the message will be discarded.
|
||
|
|
|
||
|
|
This object needs to be persistent upon reboot or restart of a device.
|
||
|
|
|
||
|
|
A MEP can be both a single-ended Responder and Controller simultaneously.
|
||
|
|
"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamPmMepEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamPmMepSlmSingleEndedResponder OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Synthetic Loss Measurement (SLM)
|
||
|
|
single-ended Responder is enabled.
|
||
|
|
The value 'true' indicates the single-ended SLM Responder is enabled and
|
||
|
|
if a SLM message is received a SLR will be sent in reply.
|
||
|
|
The value 'false' indicates the single-ended SLM Responder is disabled.
|
||
|
|
If a SLM message is received no response will be sent and the message
|
||
|
|
will be discarded.
|
||
|
|
This object needs to be persistent upon reboot or restart of a device.
|
||
|
|
A MEP can be both a single-ended Responder and Controller simultaneously.
|
||
|
|
"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamPmMepEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamPmMepDmSingleEndedResponder OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Delay Measurement (DMM) single
|
||
|
|
ended Responder is enabled.
|
||
|
|
The value 'true' indicates the single-ended Delay Measurement Responder
|
||
|
|
is enabled and if a DMM message is received a DMR will be sent in reply.
|
||
|
|
The value 'false' indicates the single-ended Delay Measurement Responder
|
||
|
|
is disabled. If a DMM message is received no response will be sent and
|
||
|
|
the message will be discarded.
|
||
|
|
This object needs to be persistent upon reboot or restart of a device.
|
||
|
|
A MEP can be both a single-ended Responder and Controller simultaneously.
|
||
|
|
"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamPmMepEntry 4 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Configuration Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes configuration objects and operations for the
|
||
|
|
Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM].
|
||
|
|
|
||
|
|
Each row in the table represents a Loss Measurement session for
|
||
|
|
the defined MEP. This table uses four indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific LM session on the selected MEP. A
|
||
|
|
Loss Measurement session is created on an existing MEP by first
|
||
|
|
accessing the jnxSoamPmMepOperNextIndex object and using this value as
|
||
|
|
the jnxSoamLmCfgIndex in the row creation.
|
||
|
|
|
||
|
|
Some writable objects in this table are only applicable in certain cases
|
||
|
|
(as described under each object), and attempts to write values for them
|
||
|
|
in other cases will be ignored.
|
||
|
|
|
||
|
|
The writable objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R68; [Y.1731]"
|
||
|
|
::= { jnxSoamPmLmObjects 1 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmCfgTable."
|
||
|
|
INDEX { dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmCfgTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmCfgEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmCfgIndex Unsigned32,
|
||
|
|
jnxSoamLmCfgType INTEGER,
|
||
|
|
jnxSoamLmCfgVersion Unsigned32,
|
||
|
|
jnxSoamLmCfgEnabled TruthValue,
|
||
|
|
jnxSoamLmCfgMeasurementEnable BITS,
|
||
|
|
jnxSoamLmCfgMessagePeriod Integer32,
|
||
|
|
jnxSoamLmCfgPriority IEEE8021PriorityValue,
|
||
|
|
jnxSoamLmCfgFrameSize Unsigned32,
|
||
|
|
jnxSoamLmCfgDataPattern JnxSoamTcDataPatternType,
|
||
|
|
jnxSoamLmCfgTestTlvIncluded TruthValue,
|
||
|
|
jnxSoamLmCfgTestTlvPattern JnxSoamTcTestPatternType,
|
||
|
|
jnxSoamLmCfgNumIntervalsStored Unsigned32,
|
||
|
|
jnxSoamLmCfgDestMepId Dot1agCfmMepIdOrZero,
|
||
|
|
jnxSoamLmCfgDestIsMepId TruthValue,
|
||
|
|
jnxSoamLmCfgStartTimeType JnxSoamTcOperationTimeType,
|
||
|
|
jnxSoamLmCfgFixedStartDateAndTime DateAndTime,
|
||
|
|
jnxSoamLmCfgRelativeStartTime TimeInterval,
|
||
|
|
jnxSoamLmCfgRepetitionTime Unsigned32,
|
||
|
|
jnxSoamLmCfgAlignMeasurementIntervals TruthValue,
|
||
|
|
jnxSoamLmCfgAlignMeasurementOffset Unsigned32,
|
||
|
|
jnxSoamLmCfgSessionType OCTET STRING,
|
||
|
|
jnxSoamLmCfgSessionStatus OCTET STRING,
|
||
|
|
jnxSoamLmCfgHistoryClear TruthValue,
|
||
|
|
jnxSoamLmCfgRowStatus RowStatus,
|
||
|
|
jnxSoamLmCfgMeasurementInterval Unsigned32,
|
||
|
|
jnxSoamLmCfgDestMacAddress MacAddress,
|
||
|
|
jnxSoamLmCfgStopTimeType JnxSoamTcOperationTimeType,
|
||
|
|
jnxSoamLmCfgFixedStopDateAndTime DateAndTime,
|
||
|
|
jnxSoamLmCfgRelativeStopTime TimeInterval,
|
||
|
|
jnxSoamLmCfgAvailabilityMeasurementInterval Unsigned32,
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveMeasPdus Unsigned32,
|
||
|
|
jnxSoamLmCfgAvailabilityFlrThreshold Unsigned32,
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals Unsigned32,
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveHighFlr Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmCfgIndex
|
||
|
|
OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32(1..4294967295)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index to the Loss Measurement Configuration table which indicates
|
||
|
|
the specific measurement session for the MEP.
|
||
|
|
|
||
|
|
jnxSoamPmMepOperNextIndex needs to be inspected to find an
|
||
|
|
available index for row-creation.
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never reused for other PM sessions on the same MEP while this
|
||
|
|
session is active. The index value keeps increasing until it
|
||
|
|
wraps to 0. This is to facilitate access control based
|
||
|
|
on a fixed index for an EMS, since the index is not reused.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmCfgEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
lmLmm (1),
|
||
|
|
lmSlm (2),
|
||
|
|
lmCcm (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies what type of Loss Measurement
|
||
|
|
will be performed.
|
||
|
|
|
||
|
|
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked
|
||
|
|
lmSlm(2) SLM SOAM PDU generated and received SLR responses tracked
|
||
|
|
lmCcm(3) CCM SOAM PDU generated and received CCM PDUs tracked
|
||
|
|
|
||
|
|
The lmSlm value is required. The lmLmm and lmCcm values are optional.
|
||
|
|
|
||
|
|
The lmCcm loss measurement values are only valid for a point-to-point
|
||
|
|
MEG. Multipoint MEGs may give unreliable loss measurements.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731] [MEF SOAM-PM] R51, R68, O7, R102"
|
||
|
|
DEFVAL { lmSlm }
|
||
|
|
::= { jnxSoamLmCfgEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgVersion OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the version of the PDUs used to perform
|
||
|
|
Loss Measurement.
|
||
|
|
|
||
|
|
The value is placed in the Version field of the PDU and indicates
|
||
|
|
that the PDU format used is the format defined in Y.1731 with
|
||
|
|
that version.
|
||
|
|
|
||
|
|
The exact PDUs to use are specified by this object in combination with
|
||
|
|
jnxSoamLmCfgType.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731]"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Loss Measurement session
|
||
|
|
is enabled.
|
||
|
|
|
||
|
|
The value 'true' indicates the Loss Measurement session is enabled and
|
||
|
|
SOAM PDUs are sent and/or measurements are collected when the session
|
||
|
|
is running according to the scheduling objects (start time, stop time,
|
||
|
|
etc.).
|
||
|
|
|
||
|
|
The value 'false' indicates the Loss Measurement session is disabled
|
||
|
|
and SOAM PDUs are not sent and/or measurements collected.
|
||
|
|
|
||
|
|
For a Loss Measurement session to be removed the row is
|
||
|
|
deleted in order to release internal resources.
|
||
|
|
|
||
|
|
This object can written/modified after row creation time.
|
||
|
|
|
||
|
|
If the LM session is enabled it resumes after shutdown/restart.
|
||
|
|
|
||
|
|
If the LM session is disabled the current Measurement Interval is
|
||
|
|
stopped, if it in process at the time, and all the in process calculations
|
||
|
|
for the partially completed Measurement Interval are finalized.
|
||
|
|
|
||
|
|
This object does not affect whether the single-ended Responder is
|
||
|
|
enabled or not, which is enabled or disabled by the
|
||
|
|
jnxSoamPmMepLmSingleEndedResponder and
|
||
|
|
jnxSoamPmMepSlmSingleEndedResponder objects.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R4, R5, R6, O1, R12, R14"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamLmCfgEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgMeasurementEnable OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
bForwardTransmitedFrames(0),
|
||
|
|
bForwardReceivedFrames(1),
|
||
|
|
bForwardMinFlr(2),
|
||
|
|
bForwardMaxFlr(3),
|
||
|
|
bForwardAvgFlr(4),
|
||
|
|
bBackwardTransmitedFrames(5),
|
||
|
|
bBackwardReceivedFrames(6),
|
||
|
|
bBackwardMinFlr(7),
|
||
|
|
bBackwardMaxFlr(8),
|
||
|
|
bBackwardAvgFlr(9),
|
||
|
|
bSoamPdusSent(10),
|
||
|
|
bSoamPdusReceived (11),
|
||
|
|
bAvailForwardHighLoss(12),
|
||
|
|
bAvailForwardConsecutiveHighLoss(13),
|
||
|
|
bAvailForwardAvailable(14),
|
||
|
|
bAvailForwardUnavailable(15),
|
||
|
|
bAvailForwardMinFlr(16),
|
||
|
|
bAvailForwardMaxFlr(17),
|
||
|
|
bAvailForwardAvgFlr(18),
|
||
|
|
bAvailBackwardHighLoss(19),
|
||
|
|
bAvailBackwardConsecutiveHighLoss(20),
|
||
|
|
bAvailBackwardAvailable(21),
|
||
|
|
bAvailBackwardUnavailable(22),
|
||
|
|
bAvailBackwardMinFlr(23),
|
||
|
|
bAvailBackwardMaxFlr(24),
|
||
|
|
bAvailBackwardAvgFlr(25),
|
||
|
|
bMeasuredStatsForwardMeasuredFlr(26),
|
||
|
|
bMeasuredStatsBackwardMeasuredFlr(27),
|
||
|
|
bMeasuredStatsAvailForwardStatus(28),
|
||
|
|
bMeasuredStatsAvailBackwardStatus(29)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A vector of bits that indicates the type of SOAM LM counters found
|
||
|
|
in the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable,
|
||
|
|
jnxSoamLmHistoryStatsTable that are enabled.
|
||
|
|
that are enabled.
|
||
|
|
|
||
|
|
A bit set to '1' enables the specific SOAM LM counter. A bit set to
|
||
|
|
'0' disables the SOAM LM counter.
|
||
|
|
|
||
|
|
If a particular SOAM LM counter is not supported the BIT value is
|
||
|
|
set to '0'.
|
||
|
|
|
||
|
|
Not all SOAM LM counters are supported for all SOAM LM types.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
|
||
|
|
bForwardTransmitedFrames (0)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsForwardTransmittedFrames
|
||
|
|
and jnxSoamLmHistoryStatsForwardTransmittedFrames counters.
|
||
|
|
bForwardReceivedFrames(1)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsForwardReceivedFrames
|
||
|
|
and jnxSoamLmHistoryStatsForwardReceivedFrames counters.
|
||
|
|
bForwardMinFlr(2)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsForwardMinFlr
|
||
|
|
and jnxSoamLmHistoryStatsForwardMinFlr counters.
|
||
|
|
bForwardMaxFlr(3)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsForwardMaxFlr
|
||
|
|
and jnxSoamLmHistoryStatsForwardMaxFlr counters.
|
||
|
|
bForwardAvgFlr(4)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsForwardAvgFlr
|
||
|
|
and jnxSoamLmHistoryStatsForwardAvgFlr counters.
|
||
|
|
bBackwardTransmitedFrames(5)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsBackwardTransmittedFrames
|
||
|
|
and jnxSoamLmHistoryStatsBackwardTransmittedFrames counters.
|
||
|
|
bBackwardReceivedFrames(6)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsBackwardReceivedFrames
|
||
|
|
and jnxSoamLmHistoryStatsBackwardReceivedFrames counters.
|
||
|
|
bBackwardMinFlr(7)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsBackwardMinFlr
|
||
|
|
and jnxSoamLmHistoryStatsBackwardMinFlr counters.
|
||
|
|
bBackwardMaxFlr(8)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsBackwardMaxFlr
|
||
|
|
and jnxSoamLmHistoryStatsBackwardMaxFlr counters.
|
||
|
|
bBackwardAvgFlr(9)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsBackwardAvgFlr
|
||
|
|
and jnxSoamLmHistoryStatsBackwardAvgFlr counters.
|
||
|
|
bSoamPdusSent (10)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsSoamPdusSent
|
||
|
|
and jnxSoamLmHistoryStatsSoamPdusSent counters.
|
||
|
|
bSoamPdusReceivedbReceivedMeasurements (11)
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsSoamPdusReceived
|
||
|
|
and jnxSoamLmHistoryStatsSoamPdusReceived counters.
|
||
|
|
bAvailForwardHighLoss(12)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardHighLoss
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardHighLoss counters.
|
||
|
|
bAvailForwardConsecutiveHighLoss(13)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardConsecutiveHighLoss
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardConsecutiveHighLoss counters.
|
||
|
|
bAvailForwardAvailable(14)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardAvailable
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardAvailable counters.
|
||
|
|
bAvailForwardUnavailable(15)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardUnavailable
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardUnavailable counters.
|
||
|
|
bAvailForwardMinFlr(16)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardMinFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardMinFlr counters.
|
||
|
|
bAvailForwardMaxFlr(17)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardMaxFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardMaxFlr counters.
|
||
|
|
bAvailForwardAvgFlr(18)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsForwardAvgFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsForwardAvgFlr counters.
|
||
|
|
bAvailBackwardHighLoss(19)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardHighLoss
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardHighLoss counters.
|
||
|
|
bAvailBackwardConsecutiveHighLoss(20)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardConsecutiveHighLoss
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardConsecutiveHighLoss counters.
|
||
|
|
bAvailBackwardAvailable(21)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardAvailable
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardAvailable counters.
|
||
|
|
bAvailBackwardUnavailable(22)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardUnavailable
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardUnavailable counters.
|
||
|
|
bAvailBackwardMinFlr(23)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardMinFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardMinFlr counters.
|
||
|
|
bAvailBackwardMaxFlr(24)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardMaxFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardMaxFlr counters.
|
||
|
|
bAvailBackwardAvgFlr(25)
|
||
|
|
Enables/disables the jnxSoamLmCurrentAvailStatsBackwardAvgFlr
|
||
|
|
and jnxSoamLmHistoryAvailStatsBackwardAvgFlr counters.
|
||
|
|
Enables/disables the jnxSoamLmCurrentStatsSoamPdusReceived
|
||
|
|
and jnxSoamLmHistoryStatsSoamPdusReceived counters.
|
||
|
|
bMeasuredStatsForwardMeasuredFlr(26)
|
||
|
|
Enables/disables the jnxSoamLmMeasuredStatsForwardFlr counter.
|
||
|
|
bMeasuredStatsBackwardMeasuredFlr(27)
|
||
|
|
Enables/disables the jnxSoamLmMeasuredStatsBackwardFlr counter.
|
||
|
|
bMeasuredStatsAvailForwardStatus(28)
|
||
|
|
Enables/disables the jnxSoamLmMeasuredStatsAvailForwardStatus counter.
|
||
|
|
bMeasuredStatsAvailBackwardStatus(29)
|
||
|
|
Enables/disables the jnxSoamLmMeasuredStatsAvailBackwardStatus counter.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731]"
|
||
|
|
DEFVAL { { } }
|
||
|
|
::= { jnxSoamLmCfgEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgMessagePeriod OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "ms"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the interval between Loss Measurement
|
||
|
|
OAM message transmission. For Loss Measurement monitoring
|
||
|
|
applications the default value is 1 sec.
|
||
|
|
|
||
|
|
This object is not applicable if jnxSoamLmCfgType is set to lmCcm
|
||
|
|
and is ignored for that Loss Measurement Type.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R76, R77, D29, D30"
|
||
|
|
DEFVAL { 1000 }
|
||
|
|
::= { jnxSoamLmCfgEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgPriority OBJECT-TYPE
|
||
|
|
SYNTAX IEEE8021PriorityValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the Loss Measurement OAM message priority
|
||
|
|
as well as the priority of the service/OAM traffic to be monitored.
|
||
|
|
Only frames of the same Class of Service are counted.
|
||
|
|
|
||
|
|
The default value is to be the value which yields the lowest frame
|
||
|
|
loss.
|
||
|
|
|
||
|
|
This object is not applicable if jnxSoamLmCfgType is set to lmCcm.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R1, R2, R71, D28, R72, R73, R105-R109, D45;
|
||
|
|
[MEF 10.2.1] Section 6.8"
|
||
|
|
::= { jnxSoamLmCfgEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgFrameSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (64..9600)
|
||
|
|
UNITS "bytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the Loss Measurement frame size between
|
||
|
|
64 bytes and the maximum transmission unit of the EVC.
|
||
|
|
|
||
|
|
The range of frame sizes from 64 through 2000 octets need to be
|
||
|
|
supported, and the range of frame sizes from 2001 through 9600 octets
|
||
|
|
is suggested be supported.
|
||
|
|
|
||
|
|
The adjustment to the frame size of the standard frame size is
|
||
|
|
accomplished by the addition of a Data or Test TLV. A Data or Test TLV
|
||
|
|
is only added to the frame if the frame size is greater than 64 bytes.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Loss
|
||
|
|
Measurement frames, type 'lmSlm', and is ignored by the
|
||
|
|
entity receiving frames. It is not applicable for the 'lmCcm' or
|
||
|
|
'lmLmm' types.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R78, R79, D31, D32 [Y.1731]"
|
||
|
|
DEFVAL { 64 }
|
||
|
|
::= { jnxSoamLmCfgEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgDataPattern OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcDataPatternType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the LM data pattern included in a Data TLV
|
||
|
|
when the size of the LM frame is determined by the
|
||
|
|
jnxSoamLmFrameSize object and jnxoamLmTestTlvIncluded is 'false'.
|
||
|
|
|
||
|
|
If the frame size object does not define the LM frame size or
|
||
|
|
jnxSoamLmTestTlvIncluded is 'true' the value of this object is
|
||
|
|
ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
DEFVAL { zeroPattern }
|
||
|
|
::= { jnxSoamLmCfgEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgTestTlvIncluded OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether a Test TLV or Data TLV is included when the size
|
||
|
|
of the LM frame is determined by the jnxSoamLmFrameSize object.
|
||
|
|
|
||
|
|
A value of 'true' indicates that the Test TLV is to be included. A
|
||
|
|
value of 'false' indicates that the Data TLV is to be included.
|
||
|
|
|
||
|
|
If the frame size object does not define the LM frame size
|
||
|
|
the value of this object is ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731] 9.3"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { jnxSoamLmCfgEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgTestTlvPattern OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcTestPatternType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of test pattern to be
|
||
|
|
sent in the LM frame Test TLV when the size of LM PDU is
|
||
|
|
determined by the jnxSoamLmFrameSize object and
|
||
|
|
jnxSoamLmTestTlvIncluded is 'true'. If the frame size object
|
||
|
|
does not define the LM frame size or jnxSoamLmTestTlvIncluded
|
||
|
|
is 'false' the value of this object is ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
DEFVAL { null }
|
||
|
|
::= { jnxSoamLmCfgEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgNumIntervalsStored OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the number of completed Measurement Intervals
|
||
|
|
to store in the history statistic table (jnxSoamLmHistoryStatsTable)
|
||
|
|
|
||
|
|
At least 32 completed Measurement Intervals need to be stored. 96
|
||
|
|
Measurement Intervals are recommended to be stored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R21, D8, D9"
|
||
|
|
DEFVAL { 32 }
|
||
|
|
::= { jnxSoamLmCfgEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgDestMepId OBJECT-TYPE
|
||
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Maintenance Association End Point Identifier of
|
||
|
|
another MEP in the same Maintenance Association to which
|
||
|
|
the SOAM LM frame is to be sent.
|
||
|
|
|
||
|
|
This address will be used if the value of the column
|
||
|
|
jnxSoamLmDestIsMepId is 'true'. A value of zero
|
||
|
|
means that the destination MEP ID has not been configured.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Loss
|
||
|
|
Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for
|
||
|
|
the 'lmCcm' type.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R70, R104"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgDestIsMepId OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A value of 'true' indicates that MEPID of the target MEP is used for
|
||
|
|
SOAM LM frame transmission.
|
||
|
|
|
||
|
|
A value of 'false' indicates that the MAC address of the
|
||
|
|
target MEP is used for SOAM LM frame transmission.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Loss
|
||
|
|
Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for
|
||
|
|
the 'lmCcm' type.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R70, R104"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamLmCfgEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgStartTimeType OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcOperationTimeType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of start time of the SOAM LM
|
||
|
|
session. The start time can be disabled (none), immediate, relative,
|
||
|
|
or fixed.
|
||
|
|
|
||
|
|
The value of 'none' is illegal and a write error will be returned
|
||
|
|
if this value is used.
|
||
|
|
|
||
|
|
The value of 'immediate' starts the SOAM LM session when the
|
||
|
|
jnxSoamLmCfgEnabled is true.
|
||
|
|
|
||
|
|
The value of 'fixed' starts the SOAM LM session when the
|
||
|
|
jnxSoamLmFixedStartDateAndTime is less than or equal to the current
|
||
|
|
system date and time and jnxSoamLmCfgEnabled is true. This value is used
|
||
|
|
to implement an On-Demand fixed time PM session.
|
||
|
|
|
||
|
|
The value of 'relative' starts the SOAM LM session when the current
|
||
|
|
system date and time minus the jnxSoamLmRelativeStartTime is greater
|
||
|
|
than or equal to the system date and time when the jnxSoamLmStartTimeType
|
||
|
|
object was written and jnxSoamLmCfgEnabled is true. This value is used
|
||
|
|
to implement an On-Demand relative time PM session.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3, R7, R8, D1"
|
||
|
|
DEFVAL { immediate }
|
||
|
|
::= { jnxSoamLmCfgEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgFixedStartDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the fixed start date/time for the
|
||
|
|
SOAM Loss Measurement session. This object is used only used if
|
||
|
|
jnxSoamLmStartTimeType is 'fixed' and is ignored otherwise.
|
||
|
|
|
||
|
|
The default value is year 0000, month 01, day 01, time 00:00:00.00.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R9"
|
||
|
|
DEFVAL { '0000010100000000'H }
|
||
|
|
::= { jnxSoamLmCfgEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgRelativeStartTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the relative start time, from the
|
||
|
|
current system time, for the SOAM LM session. This
|
||
|
|
object is used only if jnxSoamLmStartTimeType is 'relative' and is
|
||
|
|
ignored otherwise.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R9"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgRepetitionTime OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..31536000)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable repetition time between
|
||
|
|
Measurement Intervals in a Loss Measurement session, in seconds.
|
||
|
|
|
||
|
|
If the value is 0 (none), there is no time gap between the end of one
|
||
|
|
Measurement Interval and the start of a new Measurement Interval.
|
||
|
|
This is the normal usage case.
|
||
|
|
|
||
|
|
If the value is greater than 0 but less than or equal to the measurement
|
||
|
|
interval, an error is returned.
|
||
|
|
|
||
|
|
If the value is greater than one Measurement Interval there is time gap
|
||
|
|
between the end of one Measurement Interval and the start of the next
|
||
|
|
Measurement Interval. The repetition time specifies the time between
|
||
|
|
the start of consecutive Measurement Intervals; hence the gap between
|
||
|
|
the end of one Measurement Interval and the start of the next is equal
|
||
|
|
to the difference between the repetition time and the measurement
|
||
|
|
interval. During this gap, no SOAM PDUs are sent for this session and
|
||
|
|
no measurements are made.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R18, D3, R19, R20"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 18 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAlignMeasurementIntervals OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Measurement Intervals for
|
||
|
|
the Loss Measurement session are aligned with a zero offset to
|
||
|
|
real time.
|
||
|
|
|
||
|
|
The value 'true' indicates that each Measurement Interval starts
|
||
|
|
at a time which is aligned to NE time source hour, if the repetition
|
||
|
|
time (or the Measurement Interval, if the repetition time is 0) is
|
||
|
|
a factor of an hour, i.e. 60min/15min = 4. For instance, a
|
||
|
|
Measurement Interval/repetition time of 15 minutes would stop/start
|
||
|
|
the Measurement Interval at 0, 15, 30, and 45 minutes of an hour. A
|
||
|
|
Measurement Interval/Repetition Time of 7 minutes would not align
|
||
|
|
to the hour since 7 minutes is NOT a factor of an hour, i.e.
|
||
|
|
60min/7min = 8.6. In this case the behavior is the same as if the
|
||
|
|
object is set to 'false'.
|
||
|
|
|
||
|
|
The value 'false' indicates that the first Measurement Interval starts
|
||
|
|
at an arbitrary time and each subsequent Measurement Interval starts
|
||
|
|
at a time which is determined by jnxSoamLmCfgRepetitionTime.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D4, D5, D6"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamLmCfgEntry 19 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAlignMeasurementOffset OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..525600)
|
||
|
|
UNITS "minutes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the offset in minutes from the time of day value
|
||
|
|
if jnxSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition
|
||
|
|
time is a factor of 60 minutes. If not, the value of this object
|
||
|
|
is ignored.
|
||
|
|
|
||
|
|
If the Measurement Interval is 15 minutes and
|
||
|
|
jnxSoamLmCfgAlignMeasurementIntervals is true and if this object was
|
||
|
|
set to 5 minutes, the Measurement Intervals would start at 5, 20, 35, 50
|
||
|
|
minutes past each hour.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D7"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 20 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgSessionType OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..42))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates whether the current session is defined to
|
||
|
|
be 'Proactive' or 'On-Demand'. A value of 'proactive'
|
||
|
|
indicates the current session is 'Proactive'. A value of 'onDemand'
|
||
|
|
indicates the current session is 'On-Demand'.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3"
|
||
|
|
DEFVAL { "proactive" }
|
||
|
|
::= { jnxSoamLmCfgEntry 21 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgSessionStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..44))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the current status of the LM session. A value
|
||
|
|
of 'active' indicates the current LM session is active, i.e. the current
|
||
|
|
time lies between the start time and the stop time, and
|
||
|
|
jnxSoamLmCfgEnabled is true. A value of 'notActive' indicates the
|
||
|
|
current LM session is not active, i.e. it has not started yet, has
|
||
|
|
stopped upon reaching the stop time, or is disabled.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmCfgEntry 22 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgHistoryClear OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object when written clears the Loss Measurement history
|
||
|
|
Table (jnxSoamLmHistoryStatsTable) - all rows are deleted.
|
||
|
|
When read the value always returns 'false'.
|
||
|
|
|
||
|
|
Writing this value does not change the current stat table,
|
||
|
|
nor any of the items in the configuration table.
|
||
|
|
Writing this value during row creation has no effect.
|
||
|
|
"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { jnxSoamLmCfgEntry 23 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the row.
|
||
|
|
|
||
|
|
The writable columns in a row cannot be changed if the row
|
||
|
|
is active, except for jnxSoamLmCfgHistoryClear and jnxSoamLmCfgEnabled
|
||
|
|
objects. All columns must have a valid value before a row
|
||
|
|
can be activated.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmCfgEntry 24 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgMeasurementInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..525600)
|
||
|
|
UNITS "minutes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the Measurement Interval for FLR statistics,
|
||
|
|
in minutes. A Measurement Interval of 15 minutes needs to be supported,
|
||
|
|
other intervals may be supported.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R16, R17, R110, R111, D46"
|
||
|
|
DEFVAL { 15 }
|
||
|
|
::= { jnxSoamLmCfgEntry 25 }
|
||
|
|
|
||
|
|
|
||
|
|
jnxSoamLmCfgDestMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Target or Destination MAC Address Field to be transmitted.
|
||
|
|
|
||
|
|
If jnxSoamLmCfgType is 'lmCcm', the destination MAC address is always a
|
||
|
|
multicast address indicating the level of the MEG: 01-80-c2-00-00-3y,
|
||
|
|
where y is the level of the MEG. An error is returned if this object
|
||
|
|
is set to any other value.
|
||
|
|
|
||
|
|
If jnxSoamLmCfgType is 'lmLmm' or 'lmSlm', the destination address is
|
||
|
|
the unicast address of the destination MEP. An error is returned if
|
||
|
|
this object is set to a multicast address.
|
||
|
|
|
||
|
|
This address will be used if the value of the object
|
||
|
|
mefSoamLmDestIsMepId is 'false'.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the
|
||
|
|
SOAM LM frames and is ignored by the entity receiving
|
||
|
|
SOAM LM frames.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R70, R104"
|
||
|
|
::= { jnxSoamLmCfgEntry 26 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgStopTimeType OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcOperationTimeType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of stop time to terminate the
|
||
|
|
SOAM LM session. The stop time can be forever (none), relative, or
|
||
|
|
fixed.
|
||
|
|
|
||
|
|
The value of 'none' indicates that the SOAM LM session never ends once it
|
||
|
|
has started unless it the session is disabled.
|
||
|
|
|
||
|
|
The value of 'immediate' is illegal and a write error will be returned
|
||
|
|
if this value is used.
|
||
|
|
|
||
|
|
The value of 'fixed' stops the SOAM LM session when the
|
||
|
|
jnxSoamLmFixedStopDateAndTime is less than or equal
|
||
|
|
to the current system date and time. This
|
||
|
|
value is used to implement an On-Demand fixed time PM session.
|
||
|
|
|
||
|
|
The value of 'relative' stops the SOAM LM session when the time
|
||
|
|
indicated by jnxSoamLmRelativeStopTime has passed since the session
|
||
|
|
start time as determined by the jnxSoamLmCfgStartTimeType,
|
||
|
|
jnxSoamLmCfgFixedStartDateAndTime and jnxSoamLmCfgRelativeStartTime
|
||
|
|
objects. This value is used to implement an On-Demand relative time
|
||
|
|
PM session.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3, R10, D2"
|
||
|
|
DEFVAL { none }
|
||
|
|
::= { jnxSoamLmCfgEntry 27 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgFixedStopDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the fixed stop date/time for the
|
||
|
|
SOAM Loss Measurement session. This object is used only used
|
||
|
|
if jnxSoamLmStopTimeType is 'fixed' and is ignored otherwise.
|
||
|
|
|
||
|
|
The default value is year 0000, month 01, day 01, time 00:00:00.00.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R10, R13"
|
||
|
|
DEFVAL { '0000010100000000'H }
|
||
|
|
::= { jnxSoamLmCfgEntry 28 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgRelativeStopTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the relative stop time, from the
|
||
|
|
session start time, to stop the SOAM LM session. This
|
||
|
|
object is used only if jnxSoamLmStopTimeType is 'relative' and is
|
||
|
|
ignored otherwise.
|
||
|
|
object can only be written at row creation time 1922 and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R11"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamLmCfgEntry 29 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityMeasurementInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..525600)
|
||
|
|
UNITS "minutes"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the availability Measurement Interval in
|
||
|
|
minutes.
|
||
|
|
A Measurement Interval of 15 minutes is to be supported, other intervals
|
||
|
|
can be supported.
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R16, R17"
|
||
|
|
DEFVAL { 15 }
|
||
|
|
::= { jnxSoamLmCfgEntry 30 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveMeasPdus OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1000000)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable number of consecutive
|
||
|
|
loss measurement PDUs to be used in evaluating the
|
||
|
|
availability/unavailability status of each availability
|
||
|
|
indicator per MEF 10.2.1. Loss Measurement PDUs (LMMs, CCMs or
|
||
|
|
SLMs) are sent regularly with a period defined by
|
||
|
|
jnxSoamLmCfgMessagePeriod. Therefore, this object, when
|
||
|
|
multiplied by mefSoamLmCfgMessagePeriod, 2050 is equivalent to
|
||
|
|
is equivalent to the Availability parameter of 'delta_t' as
|
||
|
|
specified by MEF 10.2.1.
|
||
|
|
|
||
|
|
If the jnxSoamLmCfgType is lmLMM or lmCCM, this object defines the
|
||
|
|
number of LMM or CCM PDUs transmitted during each 'delta_t' period.
|
||
|
|
The Availability flr for a given 'delta_t' can be calculated based
|
||
|
|
on the counters in the last LMM/R or CCM during this 'delta_t' and
|
||
|
|
the last LMM/R or CCM in the previous 'delta_t'.
|
||
|
|
|
||
|
|
If the jnxSoamLmCfgType is lmSLM, this object defines the number
|
||
|
|
of SLM PDUs transmitted during each 'delta_t' period. The
|
||
|
|
Availability flr for a given 'delta_t' is calculated based on the
|
||
|
|
number of those SLM PDUs that are lost.
|
||
|
|
|
||
|
|
If the jnxSoamLmCfgType is lmLMM or lmCCM, the number range of 1
|
||
|
|
through 10 must be supported. The number range of 10 through 1000000
|
||
|
|
may be supported, but is not mandatory.
|
||
|
|
|
||
|
|
If the jnxSoamLmCfgType is lmSLM, the number range of 10 through
|
||
|
|
100 must be supported. The number range of 100 through 1000000
|
||
|
|
may be supported, but is not mandatory.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R80, D33, R81"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { jnxSoamLmCfgEntry 31 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityFlrThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable availability threshold to be
|
||
|
|
used in evaluating the availability/unavailability status of an
|
||
|
|
availability indicator per MEF 10.2.1. The availability threshold range
|
||
|
|
of 0.00 (0) through 1.00 (100000) is supported. This parameter is
|
||
|
|
equivalent to the Availability parameter of 'C' as specified by
|
||
|
|
MEF 10.2.1.
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R81, R82, D34"
|
||
|
|
DEFVAL { 50000 }
|
||
|
|
::= { jnxSoamLmCfgEntry 32 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1000)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable number of consecutive
|
||
|
|
availability indicators to be used to determine a change in the
|
||
|
|
availability status as indicated by MEF 10.2.1. This parameter is
|
||
|
|
equivalent to the Availability parameter of 'n' as specified
|
||
|
|
by MEF 10.2.1.
|
||
|
|
The number range of 1 through 10 must be supported. The number
|
||
|
|
range of 1 through 1000 may be supported, but is not mandatory.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R80, D33"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { jnxSoamLmCfgEntry 33 }
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveHighFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1000)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable number of consecutive
|
||
|
|
availability indicators to be used for assessing CHLI. This
|
||
|
|
parameter is equivalent to the Resilency parameter of 'p' as
|
||
|
|
specified by MEF 10.2.1.
|
||
|
|
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveHighFlr must be strictly less than
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals. If not, the count of
|
||
|
|
high loss intervals over time, jnxSoamLmAvailabilityHighLoss, and the
|
||
|
|
count of consecutive high loss levels,
|
||
|
|
jnxSoamLmAvailabilityConsecutiveHighLoss, is disabled.
|
||
|
|
|
||
|
|
The number range of 1 through 10 must be supported. The number range
|
||
|
|
of 1 through 1000 may be supported, but is not mandatory.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R86, D35, D36"
|
||
|
|
DEFVAL { 5 }
|
||
|
|
::= { jnxSoamLmCfgEntry 34 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Measured Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmMeasuredStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last measured results for a SOAM Loss
|
||
|
|
Measurement session.
|
||
|
|
|
||
|
|
Each row in the table represents a Loss Measurement session for
|
||
|
|
the defined MEP. This table uses four indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific LM session on the selected MEP.
|
||
|
|
|
||
|
|
Instances of this managed object are created automatically
|
||
|
|
by the SNMP Agent when the Loss Measurement session is running.
|
||
|
|
|
||
|
|
Each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamLmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table do not need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, 8D18"
|
||
|
|
::= { jnxSoamPmLmObjects 2 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmMeasuredStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmMeasuredStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmMeasuredStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmMeasuredStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmMeasuredStatsForwardFlr Unsigned32,
|
||
|
|
jnxSoamLmMeasuredStatsBackwardFlr Unsigned32,
|
||
|
|
jnxSoamLmMeasuredStatsAvailForwardStatus JnxSoamTcAvailabilityType,
|
||
|
|
jnxSoamLmMeasuredStatsAvailBackwardStatus JnxSoamTcAvailabilityType,
|
||
|
|
jnxSoamLmMeasuredStatsAvailForwardLastTransitionTime DateAndTime,
|
||
|
|
jnxSoamLmMeasuredStatsAvailBackwardLastTransitionTime DateAndTime
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsForwardFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last frame loss ratio in the forward direction
|
||
|
|
calculated by this MEP. The FLR value
|
||
|
|
is a ratio that is expressed as a percent with a value of 0 (ratio
|
||
|
|
0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsBackwardFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last frame loss ratio in the backward direction
|
||
|
|
calculated by this MEP. The FLR value
|
||
|
|
is a ratio that is expressed as a percent with a value of 0 (ratio
|
||
|
|
0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsAvailForwardStatus OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcAvailabilityType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the availability status (the outcome of the
|
||
|
|
last known availability indicator) in the forward direction.
|
||
|
|
Note that the status of an availability indicator is not known until
|
||
|
|
the loss for a number of subsequent availability indicators has been
|
||
|
|
calculated (as determined by
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals)
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R83"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsAvailBackwardStatus OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcAvailabilityType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the availability status (the outcome of the
|
||
|
|
last availability indicator) in the backward direction.
|
||
|
|
Note that the status of an availability indicator is not known until
|
||
|
|
the loss for a number of subsequent availability indicators has been
|
||
|
|
calculated (as determined by
|
||
|
|
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals)
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R83"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsAvailForwardLastTransitionTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the time of the last transition
|
||
|
|
between available and unavailable in the forward direction.
|
||
|
|
|
||
|
|
If there have been no transitions since the Loss Measurement
|
||
|
|
Session was started, this is set to 0.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R83"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmMeasuredStatsAvailBackwardLastTransitionTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the time of the last transition
|
||
|
|
between available and unavailable in the backward direction.
|
||
|
|
|
||
|
|
If there have been no transitions since the Loss Measurement
|
||
|
|
Session was started, this is set to 0.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R83"
|
||
|
|
::= { jnxSoamLmMeasuredStatsEntry 6 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Current Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmCurrentStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the results for the current Measurement
|
||
|
|
Interval in a SOAM Loss Measurement session gathered during the interval
|
||
|
|
indicated by iterator counts.
|
||
|
|
|
||
|
|
A row in this table is created automatically
|
||
|
|
by the SNMP Agent when the Loss Measurement session is configured.
|
||
|
|
|
||
|
|
Each row in the table represents the current statistics for a Loss
|
||
|
|
Measurement session for the defined MEP. This table uses four indices.
|
||
|
|
The first three indices are the indices of the Maintenance Domain, MaNet,
|
||
|
|
and MEP tables. The fourth index is the specific LM session on the
|
||
|
|
selected MEP. There may be more than one LM session per MEP. The
|
||
|
|
main use case for this is to allow multiple CoS instances to be
|
||
|
|
operating simultaneously for a MEP.
|
||
|
|
|
||
|
|
The objects in this table apply regardless of the value of
|
||
|
|
jnxSoamLmCfgType unless otherwise specified in the object description.
|
||
|
|
|
||
|
|
Except for jnxSoamLmCurrentStatsIndex, jnxSoamLmCurrentStatsStartTime,
|
||
|
|
jnxSoamLmCurrentStatsElapsedTime and jnxSoamLmCurrentStatsSuspect,
|
||
|
|
each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamLmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table do not need to be persistent upon reboot or
|
||
|
|
restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, D9, D18"
|
||
|
|
::= { jnxSoamPmLmObjects 3 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmCurrentStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmCurrentStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmCurrentStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmCurrentStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmCurrentStatsIndex Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsStartTime DateAndTime,
|
||
|
|
jnxSoamLmCurrentStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamLmCurrentStatsSuspect TruthValue,
|
||
|
|
jnxSoamLmCurrentStatsForwardTransmittedFrames Gauge32,
|
||
|
|
jnxSoamLmCurrentStatsForwardReceivedFrames Gauge32,
|
||
|
|
jnxSoamLmCurrentStatsForwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsForwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsForwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsBackwardTransmittedFrames Gauge32,
|
||
|
|
jnxSoamLmCurrentStatsBackwardReceivedFrames Gauge32,
|
||
|
|
jnxSoamLmCurrentStatsBackwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsBackwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsBackwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentStatsSoamPdusSent Gauge32,
|
||
|
|
jnxSoamLmCurrentStatsSoamPdusReceived Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the current Measurement Interval for this
|
||
|
|
PM session. This value will become the value for
|
||
|
|
jnxSoamLmHistoryStatsIndex once the Measurement Interval
|
||
|
|
is completed.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsStartTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval started.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R22, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval has been running, in 0.01
|
||
|
|
seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R24, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is set to false at the start of a measurement
|
||
|
|
interval. It is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsForwardTransmittedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames transmitted in the
|
||
|
|
forward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of types lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
For a PM Session of type lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsForwardReceivedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames received in the
|
||
|
|
forward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of types lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of types lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsForwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsForwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsForwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsBackwardTransmittedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames transmitted in the
|
||
|
|
backward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of type lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of type lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsBackwardReceivedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames received in the
|
||
|
|
backward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of type lmLmm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of type lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsBackwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsBackwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed
|
||
|
|
as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsBackwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsSoamPdusSent OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM PDUs sent
|
||
|
|
during this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamLmCfgType is lmLmm, lmSlm, or
|
||
|
|
lmCcm. It indicates the number of LMM, CCM, or SLM SOAM frames
|
||
|
|
transmitted.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentStatsSoamPdusReceived OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM PDUs
|
||
|
|
PDUs received in this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamLmCfgType is lmLmm, lmSlm, or
|
||
|
|
lmCcm. This object indicates the number of LMR, CCM, or SLR SOAM
|
||
|
|
frames received.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentStatsEntry 16 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Loss History Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmHistoryStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the results for history Measurement
|
||
|
|
Intervals in a SOAM Loss Measurement session.
|
||
|
|
|
||
|
|
Rows of this table object are created automatically
|
||
|
|
by the SNMP Agent when the Loss Measurement session is running and a
|
||
|
|
Measurement Interval is completed.
|
||
|
|
|
||
|
|
Each row in the table represents the history statistics for a Loss
|
||
|
|
Measurement session Measurement Interval for the defined MEP. This
|
||
|
|
table uses five indices. The first three indices are the indices of
|
||
|
|
the Maintenance Domain, MaNet, and MEP tables. The fourth index is the
|
||
|
|
specific LM session on the selected MEP. The fifth index index the
|
||
|
|
specific Measurement Interval.
|
||
|
|
|
||
|
|
At least 32 completed Measurement Intervals are to be supported. 96
|
||
|
|
completed Measurement Intervals are recommended to be supported. If
|
||
|
|
there are at least 32 rows in the table and a new Measurement Interval
|
||
|
|
completes and a new row is to be added to the table, the oldest completed
|
||
|
|
Measurement Interval may be deleted (row deletion). If the measurement
|
||
|
|
interval is other than 15 minutes then a minimum of 8 hours of
|
||
|
|
completed Measurement Intervals are to be supported and 24 hours are
|
||
|
|
recommended to be supported.
|
||
|
|
|
||
|
|
Except for jnxSoamLmHistoryStatsIndex, jnxSoamLmHistoryStatsEndTime,
|
||
|
|
jnxSoamLmHistoryStatsElapsedTime and jnxSoamLmHistoryStatsSuspect,
|
||
|
|
each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamLmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The rows and objects in this table are to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, R21, D8, R25"
|
||
|
|
::= { jnxSoamPmLmObjects 4 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmHistoryStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmHistoryStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex,
|
||
|
|
jnxSoamLmHistoryStatsIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmHistoryStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmHistoryStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmHistoryStatsIndex Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsEndTime DateAndTime,
|
||
|
|
jnxSoamLmHistoryStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamLmHistoryStatsSuspect TruthValue,
|
||
|
|
jnxSoamLmHistoryStatsForwardTransmittedFrames Gauge32,
|
||
|
|
jnxSoamLmHistoryStatsForwardReceivedFrames Gauge32,
|
||
|
|
jnxSoamLmHistoryStatsForwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsForwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsForwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsBackwardTransmittedFrames Gauge32,
|
||
|
|
jnxSoamLmHistoryStatsBackwardReceivedFrames Gauge32,
|
||
|
|
jnxSoamLmHistoryStatsBackwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsBackwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsBackwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryStatsSoamPdusSent Gauge32,
|
||
|
|
jnxSoamLmHistoryStatsSoamPdusReceived Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the Measurement Interval within this
|
||
|
|
PM session.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1. Measurement Intervals
|
||
|
|
for FLR (stored in this table) are based on
|
||
|
|
iterator count and are indexed independently
|
||
|
|
of Measurement Intervals for availability
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never reused while this session is active until it wraps to zero.
|
||
|
|
The index value keeps increasing up to that time.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsEndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the Measurement Interval ended.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R23, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time that the Measurement Interval ran for,
|
||
|
|
in 0.01 seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R24, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41, R42"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsForwardTransmittedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames transmitted in the
|
||
|
|
forward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of types lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of type lmSlm this includes the count of OAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsForwardReceivedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames received in the
|
||
|
|
forward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of types lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of type lmSlm this includes the count of OAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsForwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsForwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsForwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame loss
|
||
|
|
ratio in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsBackwardTransmittedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames transmitted in the
|
||
|
|
backward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of type lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of types lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsBackwardReceivedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of frames received in the
|
||
|
|
backward direction by this MEP.
|
||
|
|
|
||
|
|
For a PM Session of type lmLmm and lmCcm this includes Ethernet
|
||
|
|
Service Frames and SOAM PDUs that are in a higher MEG level only.
|
||
|
|
|
||
|
|
For a PM Session of types lmSlm this includes the count of SOAM
|
||
|
|
ETH-SLM frames only.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsBackwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsBackwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsBackwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame loss
|
||
|
|
ratio in the backward direction calculated by this MEP for
|
||
|
|
this Measurement Interval. The FLR value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsSoamPdusSent OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM PDUs sent
|
||
|
|
during this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamLmCfgType is lmLmm, lmSlm,
|
||
|
|
or lmCcm. It indicates the number of LMM, CCM, or SLM SOAM frames
|
||
|
|
transmitted.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryStatsSoamPdusReceived OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM
|
||
|
|
PDUs received in this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamLmCfgType is lmLmm, lmSlm,
|
||
|
|
or lmCcm. This object indicates the number of LMR, CCM, or SLR
|
||
|
|
SOAM frames received.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R69, R87"
|
||
|
|
::= { jnxSoamLmHistoryStatsEntry 16 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Configuration Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes configuration objects and operations for the
|
||
|
|
Delay Measurement function.
|
||
|
|
|
||
|
|
Each row in the table represents a Delay Measurement session for
|
||
|
|
the defined MEP. This table uses four indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific DM session on the selected MEP.
|
||
|
|
|
||
|
|
A Delay Measurement session is created on an existing MEP by first
|
||
|
|
accessing the jnxSoamDmOperNextIndex object and using this value as
|
||
|
|
the jnxSoamDmCfgIndex in the row creation.
|
||
|
|
|
||
|
|
Some writable objects in this table are only applicable in certain cases
|
||
|
|
(as described under each object), and attempts to write values for them
|
||
|
|
in other cases will be ignored.
|
||
|
|
|
||
|
|
The writable objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R50; [Y.1731]"
|
||
|
|
::= { jnxSoamPmDmObjects 1 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmCfgTable."
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmCfgTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmCfgEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmCfgIndex Unsigned32,
|
||
|
|
jnxSoamDmCfgType INTEGER,
|
||
|
|
jnxSoamDmCfgVersion Unsigned32,
|
||
|
|
jnxSoamDmCfgEnabled TruthValue,
|
||
|
|
jnxSoamDmCfgMeasurementEnable BITS,
|
||
|
|
jnxSoamDmCfgMessagePeriod Integer32,
|
||
|
|
jnxSoamDmCfgPriority IEEE8021PriorityValue,
|
||
|
|
jnxSoamDmCfgFrameSize Unsigned32,
|
||
|
|
jnxSoamDmCfgDataPattern JnxSoamTcDataPatternType,
|
||
|
|
jnxSoamDmCfgTestTlvIncluded TruthValue,
|
||
|
|
jnxSoamDmCfgTestTlvPattern JnxSoamTcTestPatternType,
|
||
|
|
jnxSoamDmCfgNumIntervalsStored Unsigned32,
|
||
|
|
jnxSoamDmCfgDestMepId Dot1agCfmMepIdOrZero,
|
||
|
|
jnxSoamDmCfgDestIsMepId TruthValue,
|
||
|
|
jnxSoamDmCfgStartTimeType JnxSoamTcOperationTimeType,
|
||
|
|
jnxSoamDmCfgRepetitionTime Unsigned32,
|
||
|
|
jnxSoamDmCfgAlignMeasurementIntervals TruthValue,
|
||
|
|
jnxSoamDmCfgInterFrameDelayVariationSelectionOffset Unsigned32,
|
||
|
|
jnxSoamDmCfgSessionType OCTET STRING,
|
||
|
|
jnxSoamDmCfgSessionStatus OCTET STRING,
|
||
|
|
jnxSoamDmCfgHistoryClear TruthValue,
|
||
|
|
jnxSoamDmCfgRowStatus RowStatus,
|
||
|
|
jnxSoamDmCfgMeasurementInterval Unsigned32,
|
||
|
|
jnxSoamDmCfgDestMacAddress MacAddress,
|
||
|
|
jnxSoamDmCfgSourceMacAddress MacAddress,
|
||
|
|
jnxSoamDmCfgFixedStartDateAndTime DateAndTime,
|
||
|
|
jnxSoamDmCfgRelativeStartTime TimeInterval,
|
||
|
|
jnxSoamDmCfgStopTimeType JnxSoamTcOperationTimeType,
|
||
|
|
jnxSoamDmCfgFixedStopDateAndTime DateAndTime,
|
||
|
|
jnxSoamDmCfgRelativeStopTime TimeInterval,
|
||
|
|
jnxSoamDmCfgAlignMeasurementOffset Unsigned32,
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayInterval Unsigned32,
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval Unsigned32,
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmCfgIndex
|
||
|
|
OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32(1..4294967295)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index to the Delay Measurement Configuration table which indicates
|
||
|
|
the specific measurement session for the MEP.
|
||
|
|
|
||
|
|
jnxSoamPmMepOperNextIndex needs to be inspected to find an
|
||
|
|
available index for row-creation.
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never reused for other PM sessions on the same MEP while this
|
||
|
|
session is active. The index value keeps increasing until it
|
||
|
|
wraps to zero. This is to facilitate access control based
|
||
|
|
on a fixed index for an EMS, since the index is not reused.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCfgEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
dmDmm (1),
|
||
|
|
dm1DmTx (2),
|
||
|
|
dm1DmRx (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates what type of Delay Measurement is to
|
||
|
|
be performed.
|
||
|
|
|
||
|
|
dmDmm(1) DMM SOAM PDU generated, DMR responses received
|
||
|
|
(one-way or two-way measurements)
|
||
|
|
dm1DmTx(2) 1DM SOAM PDU generated (one-way measurements are made by
|
||
|
|
the receiver)
|
||
|
|
dm1DmRx(3) 1DM SOAM PDU received and tracked (one-way measurements)
|
||
|
|
|
||
|
|
The exact PDUs to use are specified by this object in combination with
|
||
|
|
jnxSoamDmCfgVersion.
|
||
|
|
|
||
|
|
The value dmDMM is required. The values dm1DmTx and dm1DmRx are optional.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R52, R53, R54, O5, R88"
|
||
|
|
::= { jnxSoamDmCfgEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgVersion OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the version of the PDUs used to perform
|
||
|
|
Delay Measurement.
|
||
|
|
|
||
|
|
Version 0 indicates the PDU formats defined in Y.1731-2008.
|
||
|
|
Version 1 indicates the PDU formats defined in Y.1731-2011.
|
||
|
|
|
||
|
|
The exact PDUs to use are specified by this object in combination with
|
||
|
|
jnxSoamDmCfgType.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731]"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Delay Measurement session is
|
||
|
|
enabled.
|
||
|
|
|
||
|
|
The value 'true' indicates the Delay Measurement session is enabled AND
|
||
|
|
SOAM PDUs are sent and/or measurements are collected when the session
|
||
|
|
is running according to the scheduling objects (start time, stop time,
|
||
|
|
etc.).
|
||
|
|
|
||
|
|
The value 'false' indicates the Delay Measurement session is disabled
|
||
|
|
AND SOAM PDUs are not sent and/or measurements collected.
|
||
|
|
|
||
|
|
For a Delay Measurement session to be removed the row is deleted in
|
||
|
|
order to release internal resources.
|
||
|
|
|
||
|
|
This object can written/modified after row creation time.
|
||
|
|
|
||
|
|
If the DM session is enabled it resumes after shutdown/restart.
|
||
|
|
|
||
|
|
If the DM session is disabled the current Measurement Interval is
|
||
|
|
stopped, if it in process at the time, and all the in process calculations
|
||
|
|
for the partially completed Measurement Interval are finalized.
|
||
|
|
|
||
|
|
This object does not affect whether the single-ended Responder is
|
||
|
|
enabled or not, which is enabled or disabled by the
|
||
|
|
jnxSoamPmMepDmSingleEndedResponder object.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R4, R5, R6, O1, R12, R14"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamDmCfgEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasurementEnable OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
bSoamPdusSent(0),
|
||
|
|
bSoamPdusReceived(1),
|
||
|
|
bFrameDelayTwoWayBins(2),
|
||
|
|
bFrameDelayTwoWayMin(3),
|
||
|
|
bFrameDelayTwoWayMax(4),
|
||
|
|
bFrameDelayTwoWayAvg(5),
|
||
|
|
bFrameDelayForwardBins(6),
|
||
|
|
bFrameDelayForwardMin(7),
|
||
|
|
bFrameDelayForwardMax(8),
|
||
|
|
bFrameDelayForwardAvg(9),
|
||
|
|
bFrameDelayBackwardBins(10),
|
||
|
|
bFrameDelayBackwardMin(11),
|
||
|
|
bFrameDelayBackwardMax(12),
|
||
|
|
bFrameDelayBackwardAvg(13),
|
||
|
|
bIfdvForwardBins(14),
|
||
|
|
bIfdvForwardMin(15),
|
||
|
|
bIfdvForwardMax(16),
|
||
|
|
bIfdvForwardAvg(17),
|
||
|
|
bIfdvBackwardBins(18),
|
||
|
|
bIfdvBackwardMin(19),
|
||
|
|
bIfdvBackwardMax(20),
|
||
|
|
bIfdvBackwardAvg(21),
|
||
|
|
bIfdvTwoWayBins(22),
|
||
|
|
bIfdvTwoWayMin(23),
|
||
|
|
bIfdvTwoWayMax(24),
|
||
|
|
bIfdvTwoWayAvg(25),
|
||
|
|
bFrameDelayRangeForwardBins(26),
|
||
|
|
bFrameDelayRangeForwardMax(27),
|
||
|
|
bFrameDelayRangeForwardAvg(28),
|
||
|
|
bFrameDelayRangeBackwardBins(29),
|
||
|
|
bFrameDelayRangeBackwardMax(30),
|
||
|
|
bFrameDelayRangeBackwardAvg(31),
|
||
|
|
bFrameDelayRangeTwoWayBins(32),
|
||
|
|
bFrameDelayRangeTwoWayMax(33),
|
||
|
|
bFrameDelayRangeTwoWayAvg(34),
|
||
|
|
bMeasuredStatsFrameDelayTwoWay(35),
|
||
|
|
bMeasuredStatsFrameDelayForward(36),
|
||
|
|
bMeasuredStatsFrameDelayBackward(37),
|
||
|
|
bMeasuredStatsIfdvTwoWay(38),
|
||
|
|
bMeasuredStatsIfdvForward(39),
|
||
|
|
bMeasuredStatsIfdvBackward(40)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A vector of bits that indicates the type of SOAM DM counters that
|
||
|
|
are enabled.
|
||
|
|
|
||
|
|
A bit set to '1' enables the specific SOAM DM counter.
|
||
|
|
|
||
|
|
A bit set to '0' disables the SOAM DM counter.
|
||
|
|
|
||
|
|
If a particular SOAM DM counter is not supported the BIT value is
|
||
|
|
set to '0'.
|
||
|
|
|
||
|
|
Not all SOAM DM counters are supported for all SOAM DM types.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
|
||
|
|
bSoamPdusSent(0)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsSoamPdusSent
|
||
|
|
and jnxSoamDmHistoryStatsSoamPdusSent counters.
|
||
|
|
bSoamPdusReceived(1)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsSoamPdusReceived
|
||
|
|
and jnxSoamDmHistoryStatsSoamPdusReceived counters.
|
||
|
|
bFrameDelayTwoWayBins(2)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'twoWayFrameDelay'.
|
||
|
|
bFrameDelayTwoWayMin(3)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayTwoWayMin
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayTwoWayMin counters.
|
||
|
|
bFrameDelayTwoWayMax(4)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayTwoWayMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayTwoWayMax counters.
|
||
|
|
bFrameDelayTwoWayAvg(5)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayTwoWayAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayTwoWayAvg counters.
|
||
|
|
bFrameDelayForwardBins(6)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'forwardFrameDelay'.
|
||
|
|
bFrameDelayForwardMin(7)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayForwardMin
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayForwardMin counters.
|
||
|
|
bFrameDelayForwardMax(8)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayForwardMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayForwardMax counters.
|
||
|
|
bFrameDelayForwardAvg(9)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayForwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayForwardAvg counters.
|
||
|
|
bFrameDelayBackwardBins(10)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'backwardFrameDelay'.
|
||
|
|
bFrameDelayBackwardMin(11)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayBackwardMin
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayBackwardMin counters.
|
||
|
|
bFrameDelayBackwardMax(12)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayBackwardMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayBackwardMax counters.
|
||
|
|
bFrameDelayBackwardAvg(13)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayBackwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayBackwardAvg counters.
|
||
|
|
bIfdvForwardBins(14)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'forwardIfdv'.
|
||
|
|
bIfdvForwardMin(15)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvForwardMin
|
||
|
|
and jnxSoamDmHistoryStatsIfdvForwardMin counters.
|
||
|
|
bIfdvForwardMax(16)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvForwardMax
|
||
|
|
and jnxSoamDmHistoryStatsIfdvForwardMax counters.
|
||
|
|
bIfdvForwardAvg(17)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvForwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsIfdvForwardAvg counters.
|
||
|
|
bIfdvBackwardBins(18)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'backwardIfdv'.
|
||
|
|
bIfdvBackwardMin(19)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvBackwardMin
|
||
|
|
and jnxSoamDmHistoryStatsIfdvBackwardMin counters.
|
||
|
|
bIfdvBackwardMax(20)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvBackwardMax
|
||
|
|
and jnxSoamDmHistoryStatsIfdvBackwardMax counters.
|
||
|
|
bIfdvBackwardAvg(21)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvBackwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsIfdvBackwardAvg counters.
|
||
|
|
bIfdvTwoWayBins(22)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'twoWayIfdv'.
|
||
|
|
bIfdvTwoWayMin(23)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvTwoWayMin
|
||
|
|
and jnxSoamDmHistoryStatsIfdvTwoWayMin counters.
|
||
|
|
bIfdvTwoWayMax(24)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvTwoWayMax
|
||
|
|
and jnxSoamDmHistoryStatsIfdvTwoWayMax counters.
|
||
|
|
bIfdvTwoWayAvg(25)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsIfdvTwoWayAvg
|
||
|
|
and jnxSoamDmHistoryStatsIfdvTwoWayAvg counters.
|
||
|
|
bFrameDelayRangeForwardBins(26)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'forwardFrameDelayRange'.
|
||
|
|
bFrameDelayRangeForwardMax(27)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeForwardMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeForwardMax counters.
|
||
|
|
bFrameDelayRangeForwardAvg(28)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeForwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeForwardAvg counters.
|
||
|
|
bFrameDelayRangeBackwardBins(29)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'backwardFrameDelayRange'.
|
||
|
|
bFrameDelayRangeBackwardMax(30)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeBackwardMax counters.
|
||
|
|
bFrameDelayRangeBackwardAvg(31)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeBackwardAvg counters.
|
||
|
|
bFrameDelayRangeTwoWayBins(32)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsBinsEntry counter
|
||
|
|
and the jnxSoamDmHistoryStatsBinsEntry counter
|
||
|
|
when the jnxSoamDmCfgMeasBinType is 'twoWayFrameDelayRange'.
|
||
|
|
bFrameDelayRangeTwoWayMax(33)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeTwoWayMax counters.
|
||
|
|
bFrameDelayRangeTwoWayAvg(34)
|
||
|
|
Enables/disables the jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg
|
||
|
|
and jnxSoamDmHistoryStatsFrameDelayRangeTwoWayAvg counters.
|
||
|
|
bMeasuredStatsFrameDelayTwoWay(35)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsFrameDelayTwoWay
|
||
|
|
counter.
|
||
|
|
bMeasuredStatsFrameDelayForward(36)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsFrameDelayForward
|
||
|
|
counter.
|
||
|
|
bMeasuredStatsFrameDelayBackward(37)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsFrameDelayBackward
|
||
|
|
counter.
|
||
|
|
bMeasuredStatsIfdvTwoWay(38)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsIfdvTwoWay
|
||
|
|
counter.
|
||
|
|
bMeasuredStatsIfdvForward(39)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsIfdvForward
|
||
|
|
counter.
|
||
|
|
bMeasuredStatsIfdvBackward(40)
|
||
|
|
Enables/disables the jnxSoamDmMeasuredStatsIfdvBackward
|
||
|
|
counter.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM]"
|
||
|
|
DEFVAL { { } }
|
||
|
|
::= { jnxSoamDmCfgEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMessagePeriod OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "ms"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the interval between Delay Measurement
|
||
|
|
OAM message transmission. For Delay Measurement monitoring
|
||
|
|
applications, the default value is 100ms.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R61, R62, D22, R95, R96, D39"
|
||
|
|
DEFVAL { 100 }
|
||
|
|
::= { jnxSoamDmCfgEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgPriority OBJECT-TYPE
|
||
|
|
SYNTAX IEEE8021PriorityValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the priority of frames with
|
||
|
|
Delay Measurement OAM message information.
|
||
|
|
|
||
|
|
The default value is to be the value which yields the lowest frame
|
||
|
|
loss.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R1, R2, R56, D21, R57, R58, R90-R94, D28;
|
||
|
|
[MEF 10.2.1] Section 6.8"
|
||
|
|
::= { jnxSoamDmCfgEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgFrameSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the Delay Measurement frame size between
|
||
|
|
64 bytes and the maximum transmission unit of the EVC.
|
||
|
|
|
||
|
|
The range of frame sizes from 64 through 2000 octets need to be
|
||
|
|
supported, and the range of frame sizes from 2001 through 9600 octets
|
||
|
|
is suggested to be supported.
|
||
|
|
|
||
|
|
The adjustment to the frame size of the standard frame size is
|
||
|
|
accomplished by the addition of a Data or Test TLV. A Data or Test TLV
|
||
|
|
is only added to the frame if the frame size is greater than 64 bytes.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Delay
|
||
|
|
Measurement frames (dmDmm, dm1DmTx) and is ignored by the entity
|
||
|
|
receiving frames.
|
||
|
|
|
||
|
|
In addition, this object is not valid when jnxSoamDmCfgVersion is 0.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R63, R64, D23, D24, R97, R98, D40, D41"
|
||
|
|
DEFVAL { 64 }
|
||
|
|
::= { jnxSoamDmCfgEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgDataPattern OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcDataPatternType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the DM data pattern included in a Data TLV
|
||
|
|
when the size of the DM frame is determined by the
|
||
|
|
jnxSoamDmFrameSize object and jnxSoamDmTestTlvIncluded is 'false'.
|
||
|
|
If the frame size object does not define the DM frame size or
|
||
|
|
jnxSoamDmTestTlvIncluded is 'true' the value of this object is
|
||
|
|
ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
DEFVAL { zeroPattern }
|
||
|
|
::= { jnxSoamDmCfgEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgTestTlvIncluded OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether a Test TLV or Data TLV is included when the size
|
||
|
|
of the DM frame is determined by the jnxSoamDmFrameSize object.
|
||
|
|
A value of 'true' indicates that the Test TLV is to be included. A
|
||
|
|
value of 'false' indicates that the Data TLV is to be included.
|
||
|
|
|
||
|
|
If the frame size object does not define the DM frame size
|
||
|
|
the value of this object is ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[Y.1731] 9.3"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { jnxSoamDmCfgEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgTestTlvPattern OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcTestPatternType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of test pattern to be
|
||
|
|
sent in the DM frame Test TLV when the size
|
||
|
|
of DM PDU is determined by the jnxSoamDmFrameSize object and
|
||
|
|
jnxSoamDmTestTlvIncluded is 'true'. If the frame size object
|
||
|
|
does not define the DM frame size or jnxSoamDmTestTlvIncluded
|
||
|
|
is 'false' the value of this object is ignored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
DEFVAL { null }
|
||
|
|
::= { jnxSoamDmCfgEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgNumIntervalsStored OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the number of completed Measurement Intervals
|
||
|
|
to store in the history statistic table.
|
||
|
|
|
||
|
|
At least 32 completed Measurement Intervals are to be stored. 96
|
||
|
|
Measurement Intervals are recommended to be stored.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R21, D8, D9"
|
||
|
|
DEFVAL { 32 }
|
||
|
|
::= { jnxSoamDmCfgEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgDestMepId OBJECT-TYPE
|
||
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Maintenance Association End Point Identifier of
|
||
|
|
another MEP in the same Maintenance Association to which
|
||
|
|
the SOAM DM frame is to be sent.
|
||
|
|
|
||
|
|
This address will be used if the value of the column
|
||
|
|
jnxSoamDmDestIsMepId is 'true'. A value of zero
|
||
|
|
means that the destination MEP ID has not been configured.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Delay
|
||
|
|
Measurement frames, types 'dmDmm' and 'dm1DmTx'. It is not applicable
|
||
|
|
for the 'dm1DmRx' type.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R55, R89"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgDestIsMepId OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A value of 'true' indicates that MEPID of the target MEP is used for
|
||
|
|
SOAM DM frame transmission.
|
||
|
|
|
||
|
|
A value of 'false' indicates that the destination MAC address of the
|
||
|
|
target MEP is used for SOAM DM frame transmission.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the Delay
|
||
|
|
Measurement frames, types 'dmDmm' and 'dm1DmTx'. It is not applicable
|
||
|
|
for the 'dm1DmRx type.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R55, R89"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamDmCfgEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgStartTimeType OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcOperationTimeType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of start time of the SOAM DM
|
||
|
|
session. The start time can be disabled (none), immediate, relative,
|
||
|
|
or fixed.
|
||
|
|
|
||
|
|
The value of 'none' is illegal and a write error will be returned
|
||
|
|
if this value is used.
|
||
|
|
|
||
|
|
The value of 'immediate' starts the SOAM DM session when the
|
||
|
|
jnxSoamDmCfgEnabled is true.
|
||
|
|
|
||
|
|
The value of 'fixed' starts the SOAM DM session when the
|
||
|
|
jnxSoamDmFixedStartDateAndTime is less than or equal to the current
|
||
|
|
system date and time and jnxSoamDmCfgEnabled is true. This value is used
|
||
|
|
to implement an On-Demand fixed time PM session.
|
||
|
|
|
||
|
|
The value of 'relative' starts the SOAM DM session when the current
|
||
|
|
system date and time minus the jnxSoamDmRelativeStartTime is greater than
|
||
|
|
or equal to the system date and time when the jnxSoamDmStartTimeType
|
||
|
|
object was written and jnxSoamDmCfgEnabled is true. This value is used
|
||
|
|
to implement an On-Demand relative time PM session.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3, R7, R8, D1"
|
||
|
|
DEFVAL { immediate }
|
||
|
|
::= { jnxSoamDmCfgEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgRepetitionTime OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..31536000)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a configurable repetition time between
|
||
|
|
Measurement Intervals in a Delay Measurement session in seconds.
|
||
|
|
|
||
|
|
If the value is 0 (none), there is no time gap between the end of one
|
||
|
|
Measurement Interval and the start of a new Measurement Interval.
|
||
|
|
This is the normal usage case.
|
||
|
|
|
||
|
|
If the value is greater than one Measurement Interval there is time gap
|
||
|
|
between the end of one Measurement Interval and the start of the next
|
||
|
|
Measurement Interval. The repetition time specifies the time between
|
||
|
|
the start of consecutive Measurement Intervals; hence the gap between
|
||
|
|
the end of one Measurement Interval and the start of the next is equal
|
||
|
|
to the difference between the repetition time and the measurement
|
||
|
|
interval. During this gap, no SOAM PDUs are sent for this session and
|
||
|
|
no measurements are made.
|
||
|
|
|
||
|
|
If the value is greater 0 but less than or equal to the measurement
|
||
|
|
interval, an error is returned.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R18, D3, R19, R20"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgAlignMeasurementIntervals OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the Measurement Intervals for
|
||
|
|
the Delay Measurement session are aligned with a zero offset to
|
||
|
|
real time.
|
||
|
|
|
||
|
|
The value 'true' indicates that each Measurement Interval starts
|
||
|
|
at a time which is aligned to NE time source hour, if the repetition
|
||
|
|
time (or the Measurement Interval, if the repetition time is 0) is
|
||
|
|
a factor of an hour, i.e. 60min/15min = 4. For instance, a
|
||
|
|
Measurement Interval/Repetition Time of 15 minutes would stop/start
|
||
|
|
the Measurement Interval at 0, 15, 30, and 45 minutes of an hour. A
|
||
|
|
Measurement Interval/Repetition Time of 7 minutes would not align
|
||
|
|
to the hour since 7 minutes is NOT a factor of an hour, i.e.
|
||
|
|
60min/7min = 8.6. In this case the behavior is the same as if the
|
||
|
|
object is set to 'false'.
|
||
|
|
|
||
|
|
The value 'false' indicates that the first Measurement Interval starts
|
||
|
|
at an arbitrary time and each subsequent Measurement Interval starts
|
||
|
|
at a time which is determined by jnxSoamLmCfgRepetitionTime.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D4, D5, D6"
|
||
|
|
DEFVAL { true }
|
||
|
|
::= { jnxSoamDmCfgEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgInterFrameDelayVariationSelectionOffset OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..100)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the selection offset for
|
||
|
|
Inter-Frame Delay Variation measurements. If this value
|
||
|
|
is set to n, then the IFDV is calculated by taking the
|
||
|
|
difference in frame delay between frame F and frame (F+n).
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] O4, D25, O6, D42"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { jnxSoamDmCfgEntry 18 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgSessionType OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..42))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates whether the current session is defined to
|
||
|
|
be 'Proactive' or 'On-Demand'. A value of 'proactive'
|
||
|
|
indicates the current session is 'Proactive'. A value of 'onDemand'
|
||
|
|
indicates the current session is 'On-Demand'.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3"
|
||
|
|
DEFVAL { "proactive" }
|
||
|
|
::= { jnxSoamDmCfgEntry 19 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgSessionStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..42))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the current status of the DM session. A value
|
||
|
|
of 'active' indicates the current DM session is active, i.e. the current
|
||
|
|
time lies between the start time and the stop time, and
|
||
|
|
jnxSoamDmCfgEnabled is true. A value of 'notActive' indicates the
|
||
|
|
current DM session is not active, i.e. it has not started yet, has
|
||
|
|
stopped upon reaching the stop time, or is disabled.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCfgEntry 20 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgHistoryClear OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object when written clears the Delay Measurement history
|
||
|
|
tables (jnxSoamDmHistoryStatsTable)
|
||
|
|
- all rows are deleted. When read the value always returns 'false'.
|
||
|
|
|
||
|
|
Writing this value does not change the current stat table,
|
||
|
|
nor any of the items in the configuration table.
|
||
|
|
|
||
|
|
Writing this object at row creation has no effect.
|
||
|
|
"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { jnxSoamDmCfgEntry 21 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the row.
|
||
|
|
|
||
|
|
The writable columns in a row cannot be changed if the row
|
||
|
|
is active, except for jnxSoamDmCfgEnabled and jnxSoamDmCfgHistoryClear
|
||
|
|
objects. All columns are to have a valid value before a row
|
||
|
|
can be activated.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCfgEntry 22 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasurementInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..1440)
|
||
|
|
UNITS "minutes"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies a Measurement Interval in minutes.
|
||
|
|
|
||
|
|
A Measurement Interval 15 minutes needs to be supported, other intervals
|
||
|
|
may be supported.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R16, R17"
|
||
|
|
DEFVAL { 15 }
|
||
|
|
::= { jnxSoamDmCfgEntry 23 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgDestMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Target or Destination MAC Address Field to be transmitted.
|
||
|
|
|
||
|
|
If mefSoamDmCfgType is 'dmDmm', the destination address is to be the
|
||
|
|
unicast address of the destination MEP. An error is returned if this
|
||
|
|
object is set to a multicast address.
|
||
|
|
|
||
|
|
If mefSoamDmCfgType is 'dm1DmTx', the destination address is normally the
|
||
|
|
unicast address of the destination MEP, but can be a multicast address
|
||
|
|
indicating the level of the MEG: 01-80-c2-00-00-3y, where y is the
|
||
|
|
level of the MEG. An error is returned if this object is set to any
|
||
|
|
other multicast address.
|
||
|
|
|
||
|
|
If mefSoamDmCfgType is 'dm1DmRx', this object is ignored.
|
||
|
|
|
||
|
|
This address will be used if the value of the object
|
||
|
|
mefSoamDmDestIsMepId is 'false'.
|
||
|
|
|
||
|
|
This object is only valid for the entity transmitting the
|
||
|
|
SOAM DM frames and is ignored by the entity receiving
|
||
|
|
SOAM DM frames.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R55, R89"
|
||
|
|
::= { jnxSoamDmCfgEntry 24 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgSourceMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Source MAC Address Field of the received SOAM DM session PDUs.
|
||
|
|
|
||
|
|
If mefSoamDmCfgType is dm1DmRx this object indicates the source
|
||
|
|
address of the dm1DmTx DM session.
|
||
|
|
|
||
|
|
This object is only valid for mefSoamDmCfgType set to dm1DmRx. It is
|
||
|
|
ignored for mefSoamDmCfgType set to dmDmm or dm1DmTx.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R55, R89"
|
||
|
|
::= { jnxSoamDmCfgEntry 25 }
|
||
|
|
|
||
|
|
|
||
|
|
jnxSoamDmCfgFixedStartDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the fixed start date/time for the
|
||
|
|
SOAM Delay Measurement session. This object is used only used if
|
||
|
|
mefSoamDmStartTimeType is 'fixed' and is ignored otherwise.
|
||
|
|
|
||
|
|
The default value is year 0000, month 01, day 01, time 00:00:00.00.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R9"
|
||
|
|
DEFVAL { '0000010100000000'H }
|
||
|
|
::= { jnxSoamDmCfgEntry 26 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgRelativeStartTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the relative start time, from
|
||
|
|
the current system time, for the SOAM DM session. This
|
||
|
|
object is used only if mefSoamDmStartTimeType is 'relative'
|
||
|
|
and is ignored otherwise.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R9"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 27 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgStopTimeType OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcOperationTimeType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the type of stop time to terminate the
|
||
|
|
SOAM DM session. The stop time can be forever (none), relative, or
|
||
|
|
fixed.
|
||
|
|
|
||
|
|
The value of 'none' indicates that the SOAM DM session never ends once it
|
||
|
|
has started unless the session is disabled.
|
||
|
|
|
||
|
|
The value of 'immediate' is illegal and a write error will be returned
|
||
|
|
if this value is used.
|
||
|
|
|
||
|
|
The value of 'fixed' stops the SOAM DM session when the
|
||
|
|
mefSoamDmFixedStopDateAndTime is less than or equal
|
||
|
|
to the current system date. This
|
||
|
|
value is used to implement an On-Demand fixed time PM session.
|
||
|
|
|
||
|
|
The value of 'relative' stops the SOAM DM session when the time
|
||
|
|
indicated by mefSoamDmRelativeStopTime has passed since the session
|
||
|
|
start time as determined by the mefSoamDmCfgStartTimeType,
|
||
|
|
mefSoamDmCfgFixedStartDateAndTime and mefSoamDmCfgRelativeStartTime
|
||
|
|
objects.
|
||
|
|
This value is used to implement an On-Demand relative time PM session.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R3, R10, D2"
|
||
|
|
DEFVAL { none }
|
||
|
|
::= { jnxSoamDmCfgEntry 28 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgFixedStopDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the fixed stop date/time for the
|
||
|
|
SOAM Delay Measurement session. This object is used only used
|
||
|
|
if mefSoamDmStopTimeType is 'fixed' and is ignored otherwise.
|
||
|
|
|
||
|
|
The default value is year 0000, month 01, day 01, time 00:00:00.00.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R10, R13"
|
||
|
|
DEFVAL { '0000010100000000'H }
|
||
|
|
::= { jnxSoamDmCfgEntry 29 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgRelativeStopTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the relative stop time, from the
|
||
|
|
session start time, to stop the SOAM DM session. This
|
||
|
|
object is used only if mefSoamDmStopTimeType is 'relative' and is
|
||
|
|
otherwise.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R11"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 30 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgAlignMeasurementOffset OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..525600)
|
||
|
|
UNITS "minutes"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the offset in minutes from the time of day value
|
||
|
|
if mefSoamDmCfgAlignMeasurementIntervals is 'true' and the repetition
|
||
|
|
time is a factor of 60 minutes. If not, the value of this object
|
||
|
|
is ignored.
|
||
|
|
|
||
|
|
If the Measurement Interval is 15 minutes and
|
||
|
|
mefSoamDmCfgAlignMeasurementIntervals is true and if this object was
|
||
|
|
set to 5 minutes, the Measurement Intervals would start at 5, 20, 35, 50
|
||
|
|
minutes past each hour.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D7"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxSoamDmCfgEntry 31 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (2..100)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the number of measurement bins
|
||
|
|
per Measurement Interval for Frame Delay measurements.
|
||
|
|
|
||
|
|
At least 3 bins are to be supported; at least 10 bins are recommended
|
||
|
|
to be supported.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R27, D11, R28, D12"
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { jnxSoamDmCfgEntry 32 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (2..100)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the number of measurement bins
|
||
|
|
per Measurement Interval for Inter-Frame Delay Variation
|
||
|
|
measurements.
|
||
|
|
|
||
|
|
The minimum number of measurement bins to be supported is 2. The
|
||
|
|
supported is 10.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R29, D13, R30, D14"
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { jnxSoamDmCfgEntry 33 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (2..100)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the number of measurement bins
|
||
|
|
per Measurement Interval for Frame Delay Range measurements.
|
||
|
|
|
||
|
|
At least 2 bins are to be supported; at least 10 bins are recommended
|
||
|
|
to be supported.
|
||
|
|
|
||
|
|
This object can only be written at row creation time and cannot be
|
||
|
|
modified once it has been created.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R31, D15, R32, D16"
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { jnxSoamDmCfgEntry 34 }
|
||
|
|
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Measured Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmMeasuredStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last measured results for a SOAM Delay
|
||
|
|
Measurement session.
|
||
|
|
|
||
|
|
Each row in the table represents a Delay Measurement session for
|
||
|
|
the defined MEP. This table uses four indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific DM session on the selected MEP.
|
||
|
|
|
||
|
|
Instances of this managed object are created automatically
|
||
|
|
by the SNMP Agent when the Delay Measurement session is running.
|
||
|
|
|
||
|
|
Each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamDmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table do not need to be persistent upon reboot or restart
|
||
|
|
of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, D18"
|
||
|
|
::= { jnxSoamPmDmObjects 2 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmMeasuredStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmMeasuredStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmMeasuredStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmMeasuredStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayTwoWay Unsigned32,
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayForward Unsigned32,
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayBackward Unsigned32,
|
||
|
|
jnxSoamDmMeasuredStatsIfdvTwoWay Unsigned32,
|
||
|
|
jnxSoamDmMeasuredStatsIfdvForward Unsigned32,
|
||
|
|
jnxSoamDmMeasuredStatsIfdvBackward Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayTwoWay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the two-way frame delay calculated by this
|
||
|
|
MEP from the last received SOAM PDU.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayForward OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the frame delay in the forward direction
|
||
|
|
calculated by this MEP from the last received SOAM PDU. The value of this
|
||
|
|
object may not be accurate in the absence of sufficiently precise clock
|
||
|
|
synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayBackward OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the frame delay in the backward direction
|
||
|
|
calculated by this MEP from the last received SOAM PDU. The value of this
|
||
|
|
object may not be accurate in the absence of sufficiently precise clock
|
||
|
|
synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsIfdvTwoWay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last two-way inter-frame delay
|
||
|
|
interval calculated by this MEP.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsIfdvForward OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamDmMeasuredStatsIfdvBackward OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the last one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmMeasuredStatsEntry 6 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Current Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmCurrentStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the results for the current Measurement
|
||
|
|
Interval in a SOAM Delay Measurement session gathered during the interval
|
||
|
|
indicated by iterator count.
|
||
|
|
|
||
|
|
A row in this table is created automatically
|
||
|
|
by the SNMP Agent when the Delay Measurement session is configured.
|
||
|
|
|
||
|
|
Each row in the table represents the current statistics for a Delay
|
||
|
|
Measurement session for the defined MEP. This table uses four indices.
|
||
|
|
The first three indices are the indices of the Maintenance Domain, MaNet,
|
||
|
|
and MEP tables. The fourth index is the specific DM session on the
|
||
|
|
selected MEP. There can be more than one DM session per MEP.
|
||
|
|
|
||
|
|
The objects in this table apply regardless of the value of
|
||
|
|
jnxSoamDmCfgType unless otherwise specified in the object description.
|
||
|
|
Backward and two-way statistic objects are undefined if jnxSoamDmCfgType
|
||
|
|
is dm1DmRx.
|
||
|
|
|
||
|
|
Except for jnxSoamDmCurrentStatsIndex, jnxSoamDmCurrentStatsStartTime
|
||
|
|
jnxSoamDmCurrentStatsElapsedTime and jnxSoamDmCurrentStatsSuspect,
|
||
|
|
each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamDmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table do not need to be persistent upon reboot or
|
||
|
|
restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, D9, D18"
|
||
|
|
::= { jnxSoamPmDmObjects 3 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmCurrentStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmCurrentStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmCurrentStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmCurrentStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmCurrentStatsIndex Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsStartTime DateAndTime,
|
||
|
|
jnxSoamDmCurrentStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamDmCurrentStatsSuspect TruthValue,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayMin Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsSoamPdusSent Gauge32,
|
||
|
|
jnxSoamDmCurrentStatsSoamPdusReceived Gauge32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the current Measurement Interval for this
|
||
|
|
PM session. This value will become the value for
|
||
|
|
jnxSoamDmHistoryStatsIndex once the Measurement Interval
|
||
|
|
is completed.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsStartTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval started.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R22, R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval has been running, in 0.01
|
||
|
|
seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R24, R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is to be set to false at the start of a measurement
|
||
|
|
interval. It is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67, R101"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67, R101"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67, R101"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R67"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 18 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 19 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 20 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 21 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 22 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsSoamPdusSent OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM PDUs sent
|
||
|
|
during this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamDmCfgType is dmDmm or dm1DmTx and
|
||
|
|
is undefined if jnxSoamDmCfgType is dm1DmRx. It indicates the
|
||
|
|
number of DMM or 1DM SOAM frames transmitted.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 23 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsSoamPdusReceived OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM
|
||
|
|
PDUs received in this Measurement Interval.
|
||
|
|
|
||
|
|
This object indicates the number of DMR and 1DM SOAM frames
|
||
|
|
received. This object applies when jnxSoamDmCfgTypeis dmDmm or
|
||
|
|
dm1DmRx and is undefined if jnxSoamDmCfgTypeis dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 24 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay range
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 25 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay range
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 26 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay range
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 27 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay range
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 28 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way frame delay range
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 29 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way frame delay range
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCurrentStatsEntry 30 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement History Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmHistoryStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the results for history Measurement
|
||
|
|
Intervals in a SOAM Delay Measurement session.
|
||
|
|
|
||
|
|
Rows of this table are created automatically
|
||
|
|
by the SNMP Agent when the Delay Measurement session is running and a
|
||
|
|
Measurement Interval is completed.
|
||
|
|
|
||
|
|
Each row in the table represents the Measurement Interval history
|
||
|
|
statistics for a Delay Measurement session for the defined MEP. This
|
||
|
|
table uses five indices. The first three indices are the indices of
|
||
|
|
the Maintenance Domain, MaNet, and MEP tables. The fourth index is the
|
||
|
|
specific DM session on the selected MEP. The fifth index is the
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
At least 32 completed Measurement Intervals are to be supported. 96
|
||
|
|
completed Measurement Intervals are recommended to be supported. If
|
||
|
|
there are at least 32 rows in the table and a new Measurement Interval
|
||
|
|
completes and a new row is to be added to the table, the oldest completed
|
||
|
|
Measurement Interval can be deleted (row deletion). If the measurement
|
||
|
|
interval is other than 15 minutes then a minimum of 8 hours of
|
||
|
|
completed Measurement Intervals are to be supported and 24 hours are
|
||
|
|
recommended to be supported.
|
||
|
|
|
||
|
|
The objects in this table apply regardless of the value of
|
||
|
|
jnxSoamDmCfgType unless otherwise specified in the object description.
|
||
|
|
Backward and two-way statistic objects are undefined if jnxSoamDmCfgType
|
||
|
|
is dm1DmRx.
|
||
|
|
|
||
|
|
Except for jnxSoamDmHistoryStatsIndex, jnxSoamDmHistoryStatsEndTime,
|
||
|
|
jnxSoamDmHistoryStatsElapsedTime and jnxSoamDmHistoryStatsSuspect,
|
||
|
|
each object in this table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamDmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The rows and objects in this table are to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, R21, D8, R25"
|
||
|
|
::= { jnxSoamPmDmObjects 4 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmHistoryStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmHistoryStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex,
|
||
|
|
jnxSoamDmHistoryStatsIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmHistoryStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmHistoryStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmHistoryStatsIndex Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsEndTime DateAndTime,
|
||
|
|
jnxSoamDmHistoryStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamDmHistoryStatsSuspect TruthValue,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayMin Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsSoamPdusSent Gauge32,
|
||
|
|
jnxSoamDmHistoryStatsSoamPdusReceived Gauge32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeForwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeForwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeBackwardMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeBackwardAvg Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeTwoWayMax Unsigned32,
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeTwoWayAvg Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the Measurement Interval within this
|
||
|
|
PM session.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1.
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never reused while this session is active until it wraps to zero.
|
||
|
|
The index value keeps increasing up to that time.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsEndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the Measurement Interval ended.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R23, R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time that the Measurement Interval ran for,
|
||
|
|
in 0.01 seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41, R42"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way frame delay
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way frame delay
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval. The value of this object may not be accurate
|
||
|
|
in the absence of sufficiently precise clock synchronization.
|
||
|
|
|
||
|
|
This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way inter-frame delay
|
||
|
|
interval in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 18 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way inter-frame delay
|
||
|
|
interval in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 19 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayMin OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 20 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 21 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsIfdvTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way inter-frame delay
|
||
|
|
interval calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 22 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsSoamPdusSent OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM PDUs sent
|
||
|
|
during this Measurement Interval.
|
||
|
|
|
||
|
|
This object applies when jnxSoamDmCfgType is dmDmm or dm1DmTx and
|
||
|
|
is undefined if jnxSoamDmCfgType is dm1DmRx. It indicates the
|
||
|
|
number of DMM or 1DM SOAM frames transmitted.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 23 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsSoamPdusReceived OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of SOAM
|
||
|
|
PDUs received in this Measurement Interval.
|
||
|
|
|
||
|
|
This object indicates the number of DMR and 1DM SOAM frames
|
||
|
|
received. This object applies when jnxSoamDmCfgType is dmDmm or
|
||
|
|
dm1DmRx and is undefined if jnxSoamDmCfgType is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 24 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeForwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way Frame Delay Range
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 25 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeForwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way Frame Delay Range
|
||
|
|
in the forward direction calculated by this MEP for this
|
||
|
|
Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R100"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 26 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeBackwardMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way Frame Delay Range
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 27 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeBackwardAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way Frame Delay Range
|
||
|
|
in the backward direction calculated by this MEP for this
|
||
|
|
Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 28 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeTwoWayMax OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum two-way Frame Delay Range
|
||
|
|
calculated by this MEP for this Measurement Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 29 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsFrameDelayRangeTwoWayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average two-way Frame Delay Range
|
||
|
|
Interval.
|
||
|
|
|
||
|
|
The value of this object is undefined when jnxSoamDmCfgType
|
||
|
|
is dm1DmTx or dm1DmRx.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmHistoryStatsEntry 30 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Performance Measurement Loss Threshold Configuration Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmThresholdCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the list of Loss Measurement configuration threshold
|
||
|
|
values for LM Performance Monitoring.
|
||
|
|
The main purpose of the threshold configuration table is to configure
|
||
|
|
threshold alarm notifications indicating that a specific performance
|
||
|
|
metric is not being met.
|
||
|
|
|
||
|
|
Each row in the table represents a Loss Measurement session threshold
|
||
|
|
set for the defined MEP. This table uses five indices. The first three
|
||
|
|
indices are the indices of the Maintenance Domain, MaNet, and MEP tables.
|
||
|
|
The fourth index is the specific LM session on the selected MEP. The
|
||
|
|
fifth index is the specific threshold set number.
|
||
|
|
|
||
|
|
Rows in this table are not created automatically. A row is created in
|
||
|
|
this table to set up a threshold set on a configured MEP that has a
|
||
|
|
configured LM session.
|
||
|
|
|
||
|
|
If two managers try to 'create' the same row at the same time, the first
|
||
|
|
creation would succeed, the second creation attempt would result in an
|
||
|
|
error. The second creation attempt would then need to select a new index
|
||
|
|
value to successfully create a new row.
|
||
|
|
|
||
|
|
An NE needs to support at least one threshold set for NE SOAM PM compliance. A
|
||
|
|
second threshold set on the NE is desirable. More than two threshold
|
||
|
|
sets can be configured on the NE if supported on the NE.
|
||
|
|
|
||
|
|
All the objects in the row have a default value that disables the
|
||
|
|
particular threshold measurement. In order to enable a threshold
|
||
|
|
measurement the particular bit in the jnxSoamLmThresholdCfgEnable object
|
||
|
|
is to be set to '1' and the selected threshold measurement is to have
|
||
|
|
a threshold value configured. Non-configured threshold measurements
|
||
|
|
are disabled by default.
|
||
|
|
|
||
|
|
The writable objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmLmObjects 5 }
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmThresholdCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmThresholdCfgTable."
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex,
|
||
|
|
jnxSoamLmThresholdCfgIndex
|
||
|
|
}
|
||
|
|
::= {jnxSoamLmThresholdCfgTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmThresholdCfgEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmThresholdCfgIndex Unsigned32,
|
||
|
|
jnxSoamLmThresholdCfgEnable BITS,
|
||
|
|
jnxSoamLmThresholdCfgAvgFlrForwardThreshold Unsigned32,
|
||
|
|
jnxSoamLmThresholdCfgAvgFlrBackwardThreshold Unsigned32,
|
||
|
|
jnxSoamLmThresholdCfgRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32(0..4294967295)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the threshold number for the specific LM
|
||
|
|
threshold entry.
|
||
|
|
|
||
|
|
An index value of '1' needs to be supported. Other index values
|
||
|
|
can also be supported.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmThresholdCfgEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgEnable OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
bJnxSoamLmMeasuredFlrForwardThreshold(0),
|
||
|
|
bJnxSoamLmMaxFlrForwardThreshold(1),
|
||
|
|
bJnxSoamLmAvgFlrForwardThreshold(2),
|
||
|
|
bJnxSoamLmMeasuredFlrBackwardThreshold(3),
|
||
|
|
bJnxSoamLmMaxFlrBackwardThreshold(4),
|
||
|
|
bJnxSoamLmAvgFlrBackwardThreshold(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A vector of bits that indicates the type of SOAM LM thresholds
|
||
|
|
notifications that are enabled.
|
||
|
|
|
||
|
|
A bit set to '1' enables the specific SOAM LM threshold notification
|
||
|
|
and when the specific counter is enabled and the threshold is crossed a
|
||
|
|
notification is generated.
|
||
|
|
|
||
|
|
A bit set to '0' disables the specific SOAM LM threshold notification.
|
||
|
|
|
||
|
|
If a particular SOAM LM threshold is not supported the BIT value is
|
||
|
|
set to '0'.
|
||
|
|
|
||
|
|
bJnxSoamLmMeasuredFlrForwardThreshold(0)
|
||
|
|
Enables/disables measured frame loss forward ratio threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamLmMeasuredStatsForwardFlr value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamLmMaxFlrForwardThreshold(1)
|
||
|
|
Enables/disables maximum frame loss forward ratio threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamLmCurrentStatsForwardMaxFlr value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamLmAvgFlrForwardThreshold(2)
|
||
|
|
Enables/disables average frame loss forward ratio threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamLmCurrentStatsForwardAvgFlr value is greater
|
||
|
|
than or equal to the threshold value.
|
||
|
|
bJnxSoamLmMeasuredFlrBackwardThreshold(3)
|
||
|
|
Enables/disables measured frame loss backward ratio threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamLmMeasuredStatsBackwardFlr value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamLmMaxFlrBackwardThreshold(4)
|
||
|
|
Enables/disables maximum frame loss backward ratio threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamLmCurrentStatsBackwardMaxFlr value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamLmAvgFlrBackwardThreshold(5)
|
||
|
|
Enables/disables average frame loss backward ratio threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamLmCurrentStatsBackwardAvgFlr value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
"
|
||
|
|
DEFVAL { { } }
|
||
|
|
::= { jnxSoamLmThresholdCfgEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgAvgFlrForwardThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to set the average forward frame loss ratio
|
||
|
|
threshold value that will be used to determine if a threshold
|
||
|
|
notification is generated.
|
||
|
|
"
|
||
|
|
DEFVAL { 100000 }
|
||
|
|
::= { jnxSoamLmThresholdCfgEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgAvgFlrBackwardThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to set the average backward frame loss ratio
|
||
|
|
threshold value that will be used to determine if a threshold
|
||
|
|
notification is generated.
|
||
|
|
"
|
||
|
|
DEFVAL { 100000 }
|
||
|
|
::= { jnxSoamLmThresholdCfgEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmThresholdCfgRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the row.
|
||
|
|
|
||
|
|
The writable columns in a row cannot be changed if the row
|
||
|
|
is active. All columns are to have a valid value before a row
|
||
|
|
can be activated.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmThresholdCfgEntry 5 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Current Availability Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmCurrentAvailStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the current results for a SOAM Loss Measurement
|
||
|
|
session for availability statistics gathered during the interval
|
||
|
|
indicated by jnxSoamLmCfgAvailabilityMeasurementInterval.
|
||
|
|
|
||
|
|
Each row in the table represents a Loss Measurement session for
|
||
|
|
the defined MEP. This table uses four indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific LM session on the selected MEP.
|
||
|
|
|
||
|
|
Instances of this managed object are created automatically
|
||
|
|
by the SNMP Agent when the Loss Measurement session is running.
|
||
|
|
|
||
|
|
The objects in this table apply regardless of the value of
|
||
|
|
jnxSoamLmCfgType unless otherwise specified in the object description.
|
||
|
|
|
||
|
|
Except for jnxSoamLmCurrentAvailStatsIndex,
|
||
|
|
jnxSoamLmCurrentAvailStatsStartTime, jnxSoamLmCurrentAvailStatsElapsedTime
|
||
|
|
and jnxSoamLmCurrentAvailStatsSuspect, each object in this table applies
|
||
|
|
only if the corresponding bit is set in jnxSoamLmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table may be persistent upon reboot or restart
|
||
|
|
of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D9, D18"
|
||
|
|
::= { jnxSoamPmLmObjects 6 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmCurrentAvailStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmCurrentAvailStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmCurrentAvailStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmCurrentAvailStatsIndex Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsStartTime DateAndTime,
|
||
|
|
jnxSoamLmCurrentAvailStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamLmCurrentAvailStatsSuspect TruthValue,
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardHighLoss Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardHighLoss Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardConsecutiveHighLoss Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardConsecutiveHighLoss Unsigned32,
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardAvailable Gauge32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardAvailable Gauge32,
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardUnavailable Gauge32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardUnavailable Gauge32,
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardAvgFlr Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the current availability Measurement Interval for this
|
||
|
|
PM session. This value will become the value for
|
||
|
|
jnxSoamLmHistoryAvailStatsIndex once the Measurement Interval
|
||
|
|
is completed. The duration of the Measurement Interval is specified
|
||
|
|
by jnxSoamLmCfgAvailabilityMeasurementInterval.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsStartTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval started.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the current Measurement Interval has been running, in 0.01
|
||
|
|
seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R24, R87, R112"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is set to false at the start of a measurement
|
||
|
|
interval. It is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of high loss intervals (HLI) over
|
||
|
|
time in the forward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs.
|
||
|
|
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of high loss intervals (HLI) over
|
||
|
|
time in the backwards direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs.
|
||
|
|
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardConsecutiveHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of consecutive high loss intervals
|
||
|
|
(CHLI) over time in the forward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs
|
||
|
|
that is determined to fall within a CHLI.
|
||
|
|
This parameter is equivalent to 'B Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardConsecutiveHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of consecutive high loss intervals
|
||
|
|
(CHLI) over time in the backward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs
|
||
|
|
that is determined to fall within a CHLI.
|
||
|
|
This parameter is equivalent to 'B Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardAvailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as available in the forward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87; [MEF 10.2.1]"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardAvailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as available in the backward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardUnavailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as unavailable in the forward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 11 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardUnavailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as unavailable in the backward direction by this MEP
|
||
|
|
during this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 2626 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsForwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed
|
||
|
|
as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamLmCurrentAvailStatsBackwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmCurrentAvailStatsEntry 18 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Loss Measurement Availability History Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamLmHistoryAvailStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the results for availability history Measurement
|
||
|
|
Intervals in a SOAM Loss Measurement session.
|
||
|
|
|
||
|
|
Rows of this table object are created automatically
|
||
|
|
by the SNMP Agent when the Loss Measurement session is running and a
|
||
|
|
Measurement Interval is completed.
|
||
|
|
|
||
|
|
Each row in the table represents the history statistics for a Loss
|
||
|
|
Measurement session availability Measurement Interval for the defined
|
||
|
|
MEP. This table uses five indices. The first three indices are the indices
|
||
|
|
of the Maintenance Domain, MaNet, and MEP tables. The fourth index is the
|
||
|
|
specific LM session on the selected MEP. The fifth index index the
|
||
|
|
specific Measurement Interval.
|
||
|
|
|
||
|
|
At least 32 completed Measurement Intervals are to be supported. 96
|
||
|
|
completed Measurement Intervals are recommended to be supported. If
|
||
|
|
there are at least 32 rows in the table and a new Measurement Interval
|
||
|
|
completes and a new row is to be added to the table, the oldest completed
|
||
|
|
Measurement Interval can be deleted (row deletion). If the availability
|
||
|
|
Measurement Interval is other than 15 minutes then a minimum of 8 hours of
|
||
|
|
completed Measurement Intervals are to be supported and 24 hours are
|
||
|
|
recommended to be supported.
|
||
|
|
|
||
|
|
Except for jnxSoamLmHistoryAvailStatsIndex,
|
||
|
|
jnxSoamLmHistoryAvailStatsEndTime, jnxSoamLmHistoryAvailStatsElapsedTime and
|
||
|
|
jnxSoamLmHistoryAvailStatsSuspect, each object in this table applies only
|
||
|
|
if the corresponding bit is set in jnxSoamLmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The rows and objects in this table are to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, R21, D8, R25"
|
||
|
|
::= { jnxSoamPmLmObjects 7 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamLmHistoryAvailStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamLmHistoryAvailStatsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamLmCfgIndex,
|
||
|
|
jnxSoamLmHistoryAvailStatsIndex
|
||
|
|
}
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamLmHistoryAvailStatsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamLmHistoryAvailStatsIndex Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsEndTime DateAndTime,
|
||
|
|
jnxSoamLmHistoryAvailStatsElapsedTime TimeInterval,
|
||
|
|
jnxSoamLmHistoryAvailStatsSuspect TruthValue,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardHighLoss Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardHighLoss Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardConsecutiveHighLoss Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardConsecutiveHighLoss Unsigned32,
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardAvailable Gauge32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardAvailable Gauge32,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardUnavailable Gauge32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardUnavailable Gauge32,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardAvgFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardMinFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardMaxFlr Unsigned32,
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardAvgFlr Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index for the availability Measurement Interval within this
|
||
|
|
PM session.
|
||
|
|
|
||
|
|
Measurement Interval indexes are assigned sequentially by
|
||
|
|
the SNMP Agent. The first Measurement Interval that occurs after
|
||
|
|
the session is started is assigned index 1. Measurement Intervals
|
||
|
|
for availability (stored in this table) are based on
|
||
|
|
jnxSoamLmCfgAvailabilityMeasurementInterval and are indexed independently
|
||
|
|
of Measurement Intervals for FLR (stored in jnxSoamLmHistoryStatsTable).
|
||
|
|
|
||
|
|
Referential integrity is necessary, i.e., the index needs to be
|
||
|
|
persistent upon a reboot or restart of a device. The index
|
||
|
|
is never reused while this session is active until it wraps to zero.
|
||
|
|
The index value keeps increasing up to that time.
|
||
|
|
"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsEndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time that the Measurement Interval ended.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R23, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsElapsedTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time that the Measurement Interval ran for,
|
||
|
|
in 0.01 seconds.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R24, R87, R112"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Whether the Measurement Interval has been marked as suspect.
|
||
|
|
|
||
|
|
The object is set to true when there is a discontinuity in the
|
||
|
|
performance measurements during the Measurement Interval. Conditions
|
||
|
|
for a discontinuity include, but are not limited to the following:
|
||
|
|
|
||
|
|
1 - The local time-of-day clock is adjusted by at least 10 seconds
|
||
|
|
2 - The conducting of a performance measurement is halted before the
|
||
|
|
current Measurement Interval is completed
|
||
|
|
3 - A local test, failure, or reconfiguration that disrupts service
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R39, R40, R41, R42"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of high loss intervals (HLI) over
|
||
|
|
time in the forward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs.
|
||
|
|
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 5 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of high loss intervals (HLI) over
|
||
|
|
time in the backward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs.
|
||
|
|
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 6 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardConsecutiveHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of consecutive high loss intervals
|
||
|
|
(CHLI) over time in the forward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs
|
||
|
|
that is determined to fall within a CHLI.
|
||
|
|
This parameter is equivalent to 'B Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; 3266 [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 7 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardConsecutiveHighLoss OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is the number of consecutive high loss intervals
|
||
|
|
(CHLI) over time in the forward direction.
|
||
|
|
|
||
|
|
The value starts at 0 and increments for every HLI that occurs
|
||
|
|
that is determined to fall within a CHLI.
|
||
|
|
This parameter is equivalent to 'B Sub T' found in MEF 10.2.1.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 8 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardAvailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as available in the forward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87; [MEF 10.2.1]"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 9 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardAvailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as available in the backward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 10 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardUnavailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as unavailable in the forward direction by this MEP during
|
||
|
|
this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardUnavailable OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the number of availability indicators
|
||
|
|
evaluated as unavailable in the backward direction by this MEP
|
||
|
|
during this Measurement Interval.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R87"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 12 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 13 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 14 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsForwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way availability flr in the forward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 15 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardMinFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the minimum one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 16 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardMaxFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the maximum one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed
|
||
|
|
as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 17 }
|
||
|
|
|
||
|
|
jnxSoamLmHistoryAvailStatsBackwardAvgFlr OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100000)
|
||
|
|
UNITS "milli-percent"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the average one-way availability flr in the backward
|
||
|
|
direction, from among the set of availability flr values calculated by
|
||
|
|
the MEP in this Measurement Interval. There is one availability flr
|
||
|
|
value for each 'delta_t' time period within the Measurement Interval, as
|
||
|
|
specified in MEF 10.2.1.
|
||
|
|
|
||
|
|
The flr value is a ratio that is expressed as a
|
||
|
|
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
|
||
|
|
|
||
|
|
Units are in milli-percent, where 1 indicates 3458 0.001 percent.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] D37"
|
||
|
|
::= { jnxSoamLmHistoryAvailStatsEntry 18 }
|
||
|
|
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Performance Measurement Delay Threshold Configuration Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmThresholdCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the list of Delay Measurement threshold configuration
|
||
|
|
values for DM Performance Monitoring.
|
||
|
|
|
||
|
|
The main purpose of the threshold configuration table is to configure
|
||
|
|
threshold alarm notifications indicating that a specific performance
|
||
|
|
metric is not being met.
|
||
|
|
|
||
|
|
Each row in the table represents a Delay Measurement session threshold
|
||
|
|
set for the defined MEP. This table uses five indices. The first three
|
||
|
|
indices are the indices of the Maintenance Domain, MaNet, and MEP tables.
|
||
|
|
The fourth index is the specific DM session on the selected MEP. The
|
||
|
|
fifth index is the specific threshold set number.
|
||
|
|
|
||
|
|
Rows in this table are not created automatically. A row is created in
|
||
|
|
this table to set up a threshold set on a configured MEP that has a
|
||
|
|
configured DM session.
|
||
|
|
|
||
|
|
An NE needs to support at least one threshold set for NE SOAM PM compliance. A
|
||
|
|
second threshold set on the NE is desirable. More than two threshold
|
||
|
|
sets on the NE can be configured if supported on the NE.
|
||
|
|
|
||
|
|
All the objects in the row have a default value that disables the
|
||
|
|
particular threshold measurement. In order to enable a threshold
|
||
|
|
measurement the particular bit in the jnxSoamDmThresholdCfgEnable object
|
||
|
|
is to be set to '1' and the selected threshold measurement is to have
|
||
|
|
a threshold value configured. Non-configured threshold measurements
|
||
|
|
are disabled by default.
|
||
|
|
|
||
|
|
The writable objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmDmObjects 5 }
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmThresholdCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmThresholdCfgTable."
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex,
|
||
|
|
jnxSoamDmThresholdCfgIndex
|
||
|
|
}
|
||
|
|
::= {jnxSoamDmThresholdCfgTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmThresholdCfgEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmThresholdCfgIndex Unsigned32,
|
||
|
|
jnxSoamDmThresholdCfgEnable BITS,
|
||
|
|
jnxSoamDmThresholdCfgAvgFrameDelayTwoWayThreshold Unsigned32,
|
||
|
|
jnxSoamDmThresholdCfgAvgIfdvTwoWayThreshold Unsigned32,
|
||
|
|
jnxSoamDmThresholdCfgRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32(0..4294967295)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the threshold number for the specific DM
|
||
|
|
threshold entry.
|
||
|
|
|
||
|
|
An index value of '1' is to be supported. Other index values
|
||
|
|
can be supported.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmThresholdCfgEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgEnable OBJECT-TYPE
|
||
|
|
SYNTAX BITS {
|
||
|
|
bJnxSoamDmMeasuredFrameDelayTwoWayThreshold(0),
|
||
|
|
bJnxSoamDmMaxFrameDelayTwoWayThreshold(1),
|
||
|
|
bJnxSoamDmAvgFrameDelayTwoWayThreshold(2),
|
||
|
|
bJnxSoamDmMeasuredIfdvTwoWayThreshold(3),
|
||
|
|
bJnxSoamDmMaxIfdvTwoWayThreshold(4),
|
||
|
|
bJnxSoamDmAvgIfdvTwoWayThreshold(5),
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeTwoWayThreshold(6),
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeTwoWayThreshold(7),
|
||
|
|
bJnxSoamDmMeasuredFrameDelayForwardThreshold(8),
|
||
|
|
bJnxSoamDmMaxFrameDelayForwardThreshold(9),
|
||
|
|
bJnxSoamDmAvgFrameDelayForwardThreshold(10),
|
||
|
|
bJnxSoamDmMeasuredIfdvForwardThreshold(11),
|
||
|
|
bJnxSoamDmMaxIfdvForwardThreshold(12),
|
||
|
|
bJnxSoamDmAvgIfdvForwardThreshold(13),
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeForwardThreshold(14),
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeForwardThreshold(15),
|
||
|
|
bJnxSoamDmMeasuredFrameDelayBackwardThreshold(16),
|
||
|
|
bJnxSoamDmMaxFrameDelayBackwardThreshold(17),
|
||
|
|
bJnxSoamDmAvgFrameDelayBackwardThreshold(18),
|
||
|
|
bJnxSoamDmMeasuredIfdvBackwardThreshold(19),
|
||
|
|
bJnxSoamDmMaxIfdvBackwardThreshold(20),
|
||
|
|
bJnxSoamDmAvgIfdvBackwardThreshold(21),
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeBackwardThreshold(22),
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeBackwardThreshold(23)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A vector of bits that indicates the type of SOAM DM threshold
|
||
|
|
notifications that are enabled.
|
||
|
|
|
||
|
|
A bit set to '1' enables the specific SOAM DM threshold notification
|
||
|
|
and when the specific counter is enabled and the threshold is crossed a
|
||
|
|
notification is generated.
|
||
|
|
|
||
|
|
A bit set to '0' disables the specific SOAM DM threshold notification.
|
||
|
|
|
||
|
|
If a particular SOAM DM threshold is not supported the BIT value is
|
||
|
|
set to '0'.
|
||
|
|
|
||
|
|
bJnxSoamDmMeasuredFrameDelayTwoWayThreshold(0)
|
||
|
|
Enables/disables measured frame two-way delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayTwoWay value is
|
||
|
|
greater than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayTwoWayThreshold(1)
|
||
|
|
Enables/disables maximum frame two-way delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayMax value is
|
||
|
|
greater than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayTwoWayThreshold(2)
|
||
|
|
Enables/disables average frame two-way delay threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayTwoWayAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMeasuredIfdvTwoWayThreshold(3)
|
||
|
|
Enables/disables measured frame IFDV two-way threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsIfdvTwoWay value is greater
|
||
|
|
than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxIfdvTwoWayThreshold(4)
|
||
|
|
Enables/disables maximum frame IFDV two-way threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgIfdvTwoWayThreshold(5)
|
||
|
|
Enables/disables average frame IFDV two-way threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsIfdvTwoWayAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeTwoWayThreshold(6)
|
||
|
|
Enables/disables maximum Frame Delay Range two-way threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeTwoWayThreshold(7)
|
||
|
|
Enables/disables average Frame Delay Range two-way threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMeasuredFrameDelayForwardThreshold(8)
|
||
|
|
Enables/disables measured forward frame delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayForward value is
|
||
|
|
greater than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayForwardThreshold(9)
|
||
|
|
Enables/disables maximum forward frame delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardMax value is
|
||
|
|
greater than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayForwardThreshold(10)
|
||
|
|
Enables/disables average forward frame delay threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayForwardAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMeasuredIfdvForwardThreshold(11)
|
||
|
|
Enables/disables measured frame IFDV forward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsIfdvForward value is greater
|
||
|
|
than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxIfdvForwardThreshold(12)
|
||
|
|
Enables/disables maximum frame IFDV forward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgIfdvForwardThreshold(13)
|
||
|
|
Enables/disables average frame IFDV forward threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsIfdvForwardAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeForwardThreshold(14)
|
||
|
|
Enables/disables maximum Frame Delay Range forward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeForwardThreshold(15)
|
||
|
|
Enables/disables average Frame Delay Range forward threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeForwardAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMeasuredFrameDelayBackwardThreshold(16)
|
||
|
|
Enables/disables measured backward frame delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsFrameDelayBackward value is
|
||
|
|
greater than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayBackwardThreshold(17)
|
||
|
|
Enables/disables maximum backward frame delay threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardMax value is
|
||
|
|
greater than or equal to threshold value in a
|
||
|
|
Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayBackwardThreshold(18)
|
||
|
|
Enables/disables average backward frame delay threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayBackwardAvg value is
|
||
|
|
greater than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMeasuredIfdvBackwardThreshold(19)
|
||
|
|
Enables/disables measured frame IFDV backward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmMeasuredStatsIfdvBackward value is greater
|
||
|
|
than or equal to threshold value.
|
||
|
|
bJnxSoamDmMaxIfdvBackwardThreshold(20)
|
||
|
|
Enables/disables maximum frame IFDV backward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgIfdvBackwardThreshold(21)
|
||
|
|
Enables/disables average frame IFDV backward threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsIfdvBackwardAvg value is greater
|
||
|
|
than or equal to the threshold value.
|
||
|
|
bJnxSoamDmMaxFrameDelayRangeBackwardThreshold(22)
|
||
|
|
Enables/disables maximum Frame Delay Range backward threshold
|
||
|
|
notification. The notification is sent immediately when the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax value is greater
|
||
|
|
than or equal to threshold value in a Measurement Interval.
|
||
|
|
bJnxSoamDmAvgFrameDelayRangeBackwardThreshold(23)
|
||
|
|
Enables/disables average Frame Delay Range backward threshold
|
||
|
|
notification. The notification is sent when at the end of a
|
||
|
|
Measurement Interval if the
|
||
|
|
jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg value is greater
|
||
|
|
than or equal to the threshold value.
|
||
|
|
"
|
||
|
|
DEFVAL { { } }
|
||
|
|
::= { jnxSoamDmThresholdCfgEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgAvgFrameDelayTwoWayThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to set the average two-way delay threshold
|
||
|
|
value that will be used to determine if a threshold notification is
|
||
|
|
generated.
|
||
|
|
"
|
||
|
|
DEFVAL { 4294967295 }
|
||
|
|
::= { jnxSoamDmThresholdCfgEntry 3 }
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgAvgIfdvTwoWayThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to set the average two-way IFDV threshold
|
||
|
|
value that will be used to determine if a threshold notification is
|
||
|
|
generated.
|
||
|
|
"
|
||
|
|
DEFVAL { 4294967295 }
|
||
|
|
::= { jnxSoamDmThresholdCfgEntry 4 }
|
||
|
|
|
||
|
|
jnxSoamDmThresholdCfgRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the row.
|
||
|
|
|
||
|
|
The writable columns in a row cannot be changed if the row
|
||
|
|
is active. All columns are to have a valid value before a row
|
||
|
|
can be activated.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmThresholdCfgEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Bin Configuration Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasBinTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmCfgMeasBinEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes configuration objects for the Delay Measurement
|
||
|
|
bins to collect stats.
|
||
|
|
|
||
|
|
Each row in the table is automatically created when the Delay
|
||
|
|
Measurement session is defined for the selected MEP. The number of rows
|
||
|
|
created is based upon three items: the DM type, the number of bins
|
||
|
|
defined for each type, and whether bins are enabled for each type.
|
||
|
|
|
||
|
|
The first four indices are the same as used to create the DM session:
|
||
|
|
Maintenance Domain, MaNet, MEP identification, and jnxSoamDmCfgIndex. The
|
||
|
|
fifth index is the type of bin, and the sixth index is the bin number.
|
||
|
|
|
||
|
|
For a dmDmm session all nine types of bins can be created. For a dm1DmmTx
|
||
|
|
session no bins are created. For a dm1DmmRx session only types
|
||
|
|
forwardFrameDelay, forwardIfdv, and forwardFrameDelayRange can be created.
|
||
|
|
|
||
|
|
The number of bins created for a bin type is based upon: the
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayInterval object, the
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval object, the
|
||
|
|
jnxSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval object, and
|
||
|
|
the jnxSoamDmCfgMeasurementEnable object.
|
||
|
|
|
||
|
|
For instance, if a dmDmm session with Bins per Frame Delay Interval
|
||
|
|
set to 5, Bins per Frame Delay Variation Interval set to 3, and Frame
|
||
|
|
Delay Range set to 2 (default), all of the appropriate bits set in
|
||
|
|
jnxSoamDmMeasurementCfgEnable, the following number of rows would be
|
||
|
|
created:
|
||
|
|
|
||
|
|
For bin types TwoWayFrameDelay(1), forwardFrameDelay(2), and
|
||
|
|
backwardFrameDelay(3) = 5 bins * 3 types = 15 rows
|
||
|
|
|
||
|
|
For bin types TwoWayIfdv(4), forwardIfdv(5), backwardIfdv(6) =
|
||
|
|
3 bins * 3 types = 9 rows.
|
||
|
|
|
||
|
|
For bins types twoWayFrameDelayRange(7), forwardFrameDelayRange(8),
|
||
|
|
backwardFrameDelayRange(9) =
|
||
|
|
2 bins * 3 types = 6 rows.
|
||
|
|
|
||
|
|
This gives a total of 30 rows created for the DMM session example.
|
||
|
|
|
||
|
|
Each value in the bin defaults to 5000us greater than the previous bin,
|
||
|
|
with the first bin default value set to 0.
|
||
|
|
|
||
|
|
For the delay example above (5 bins), the following default values
|
||
|
|
would be written to the bins:
|
||
|
|
bin 1: 0 (range is 0us <= measurement < 5,000us)
|
||
|
|
bin 2: 5000 (range is 5,000us <= measurement < 10,000us)
|
||
|
|
bin 3: 10000 (range is 10,000us <= measurement < 15,000us)
|
||
|
|
bin 4: 15000 (range is 15,000us <= measurement < 20,000us)
|
||
|
|
bin 5: 20000 (range is 20,000us <= measurement < infinity)
|
||
|
|
|
||
|
|
For the delay variation example above (3 bins), the following default
|
||
|
|
values would be written to the bins:
|
||
|
|
bin 1: 0 (range is 0us <= measurement < 5,000us)
|
||
|
|
bin 2: 5000 (range is 5,000us <= measurement < 10,000us)
|
||
|
|
bin 3: 10000 (range is 10,000us <= measurement < infinity)
|
||
|
|
|
||
|
|
For the frame delay range example above (2 bins), the following default
|
||
|
|
values would be written to the bins:
|
||
|
|
bin 1: 0 (range is 0us <= measurement < 5,000us)
|
||
|
|
bin 2: 5000 (range is 5,000us <= measurement < infinity)
|
||
|
|
|
||
|
|
The writable objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
|
||
|
|
Rows are only created if the corresponding measurement type has been enabled
|
||
|
|
via the jnxSoamDmCfgMeasurementEnable object.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R34, R36, R37, D17, R38, R65, D26, D27, R99, D43, D44"
|
||
|
|
::= { jnxSoamPmDmObjects 6 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasBinEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmCfgMeasBinEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmCfgMeasBinTable."
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex,
|
||
|
|
jnxSoamDmCfgMeasBinType,
|
||
|
|
jnxSoamDmCfgMeasBinNumber
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmCfgMeasBinTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmCfgMeasBinEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmCfgMeasBinType JnxSoamTcDelayMeasurementBinType,
|
||
|
|
jnxSoamDmCfgMeasBinNumber Unsigned32,
|
||
|
|
jnxSoamDmCfgMeasBinLowerBound Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasBinType OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamTcDelayMeasurementBinType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies whether the bin number is for
|
||
|
|
Frame Delay or Inter-Frame Delay Variation.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCfgMeasBinEntry 1 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasBinNumber OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the bin number for the
|
||
|
|
configured boundary. The first bin has bin number 1.
|
||
|
|
"
|
||
|
|
::= { jnxSoamDmCfgMeasBinEntry 2 }
|
||
|
|
|
||
|
|
jnxSoamDmCfgMeasBinLowerBound OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds (us)"
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the lower boundary for a
|
||
|
|
measurement bin. The upper boundary is defined by the next bin
|
||
|
|
value or infinite for the last bin defined.
|
||
|
|
The measurement boundary for each measurement bin is to
|
||
|
|
be larger than the measurement boundary of the preceding
|
||
|
|
measurement bin. By default, the next bin is set to 5000us larger
|
||
|
|
than the lower bin boundary.
|
||
|
|
|
||
|
|
The values in a bin boundary object represents the time range
|
||
|
|
used to segregate delay data into the appropriate statistical
|
||
|
|
data bin. For five bins with default values, each bin has the
|
||
|
|
following time range:
|
||
|
|
|
||
|
|
bin 1 = 0, range is 0us <= measurement < 5,000us
|
||
|
|
bin 2 = 5000, range is 5,000us <= measurement < 10,000us
|
||
|
|
bin 3 = 10000, range is 10,000us <= measurement < 15,000us
|
||
|
|
bin 4 = 15000, range is 15,000us <= measurement < 20,000us
|
||
|
|
< infinity
|
||
|
|
|
||
|
|
The first bin boundary (jnxSoamDmCfgBinNumber set to 1) always contains
|
||
|
|
the value of 0. Attempting to write a non-zero value to this bin will
|
||
|
|
result in an error.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R33, R35, D17"
|
||
|
|
::= { jnxSoamDmCfgMeasBinEntry 3 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Current Bin Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsBinsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmCurrentStatsBinsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the result bins for the current Measurement
|
||
|
|
Interval in a SOAM Delay Measurement session.
|
||
|
|
|
||
|
|
Each row in the table represents the current bin statistics for a
|
||
|
|
Delay Measurement session for the defined MEP. This table uses six
|
||
|
|
indices. The first three indices are the indices of the Maintenance
|
||
|
|
Domain, MaNet, and MEP tables. The fourth index is the specific DM
|
||
|
|
session on the selected MEP. The fifth index indicates bin type and
|
||
|
|
the sixth indicates the specific bin number.
|
||
|
|
|
||
|
|
A row in this table is created automatically by the SNMP Agent when
|
||
|
|
the Delay Measurement session is configured and the bin counter value
|
||
|
|
is set to 0.
|
||
|
|
|
||
|
|
The objects in this table are ignored if jnxSoamDmCfgType is 1DmTx.
|
||
|
|
|
||
|
|
This table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamDmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table do not need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, D9"
|
||
|
|
::= { jnxSoamPmDmObjects 7 }
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsBinsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmCurrentStatsBinsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmCurrentStatsBinsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex,
|
||
|
|
jnxSoamDmCfgMeasBinType,
|
||
|
|
jnxSoamDmCfgMeasBinNumber
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmCurrentStatsBinsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmCurrentStatsBinsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmCurrentStatsBinsCounter Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmCurrentStatsBinsCounter OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of completed
|
||
|
|
measurements initiated in this Measurement Interval whose value
|
||
|
|
falls within the range specified for this bin (that is, greater
|
||
|
|
than or equal to the measurement boundary for the bin, and
|
||
|
|
(unless the bin is the last bin) less than the measurement
|
||
|
|
boundary for the following bin.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R67, R100, R101"
|
||
|
|
::= { jnxSoamDmCurrentStatsBinsEntry 1 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Ethernet Delay Measurement Bin History Statistic Table
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsBinsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxSoamDmHistoryStatsBinsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the result bins for the history Measurement
|
||
|
|
Intervals in a SOAM Delay Measurement session.
|
||
|
|
|
||
|
|
Rows of this table are created automatically
|
||
|
|
by the SNMP Agent when the Delay Measurement session is running and a
|
||
|
|
Measurement Interval is completed.
|
||
|
|
|
||
|
|
Each row in the table represents the Measurement Interval history
|
||
|
|
statistics for a specific bin in a Delay Measurement session for the
|
||
|
|
defined MEP. This table uses seven indices. The first three indices
|
||
|
|
are the indices of the Maintenance Domain, MaNet, and MEP tables. The
|
||
|
|
fourth index is the specific DM session on the selected MEP. The
|
||
|
|
fifth index is the Measurement Interval. The sixth index is the
|
||
|
|
specific bin type. The seventh index is the specific bin number.
|
||
|
|
|
||
|
|
Rows in this table pertaining to a given Measurement Interval are
|
||
|
|
row in the
|
||
|
|
jnxSoamDmHistoryStatsTable is deleted.
|
||
|
|
|
||
|
|
The objects in this table are ignored if jnxSoamDmCfgType is 1DmTx.
|
||
|
|
|
||
|
|
This table applies only if the corresponding bit is set in
|
||
|
|
jnxSoamDmCfgMeasurementEnable.
|
||
|
|
|
||
|
|
The objects in this table need to be persistent upon reboot
|
||
|
|
or restart of a device.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R7, R15, R21, D8, R66, R67"
|
||
|
|
::= { jnxSoamPmDmObjects 8 }
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsBinsEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxSoamDmHistoryStatsBinsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The conceptual row of jnxSoamDmHistoryStatsBinsTable"
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
jnxSoamDmCfgIndex,
|
||
|
|
jnxSoamDmHistoryStatsIndex,
|
||
|
|
jnxSoamDmCfgMeasBinType,
|
||
|
|
jnxSoamDmCfgMeasBinNumber
|
||
|
|
}
|
||
|
|
::= { jnxSoamDmHistoryStatsBinsTable 1 }
|
||
|
|
|
||
|
|
JnxSoamDmHistoryStatsBinsEntry ::= SEQUENCE {
|
||
|
|
jnxSoamDmHistoryStatsBinsCounter Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxSoamDmHistoryStatsBinsCounter OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the count of the number of completed
|
||
|
|
measurements initiated in this Measurement Interval whose value
|
||
|
|
falls within the range specified for this bin (that is, greater
|
||
|
|
than or equal to the measurement boundary for the bin, and
|
||
|
|
(unless the bin is the last bin) less than the measurement
|
||
|
|
boundary for the following bin.
|
||
|
|
"
|
||
|
|
REFERENCE
|
||
|
|
"[MEF SOAM-PM] R66, R67, R100, R101"
|
||
|
|
::= { jnxSoamDmHistoryStatsBinsEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- Notification Data Objects
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the time and date at the time that
|
||
|
|
the notification event is detected, not the time of the notification
|
||
|
|
generation.
|
||
|
|
|
||
|
|
This object is used only for notifications. The mechanism to set and keep
|
||
|
|
current the date and time is not specified.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 1 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjThresholdId OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Object Identifier of the object that caused the generation of the
|
||
|
|
notification from the jnxSoamLmThresholdEntry or jnxSoamDmThresholdEntry.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 2 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjThresholdConfig OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The configured threshold value of the object that caused the generation
|
||
|
|
of the notification.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 3 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjThresholdValue OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured value of the object at the time of the generation of the
|
||
|
|
Notification, from the jnxSoamLmMeasuredStatsTable,
|
||
|
|
jnxSoamLmCurrentStatsTable,
|
||
|
|
jnxSoamDmMeasuredStatsTable or jnxSoamDmCurrentStatsTable.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 4 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjSuspect OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The suspect flag for the current Measurement Interval in which the
|
||
|
|
notification was generated from the jnxSoamLmCurrentStatsTable,
|
||
|
|
or jnxSoamDmCurrentStatsTable.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 5 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjCrossingType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
aboveAlarm (1),
|
||
|
|
setAlarm (2),
|
||
|
|
clearAlarm (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Notification Crossing Type of the object that caused the generation
|
||
|
|
of the notification from the jnxSoamLmThresholdEntry or
|
||
|
|
jnxSoamDmThresholdEntry.
|
||
|
|
|
||
|
|
aboveAlarm(1) indicates that the crossing type alarm was an above
|
||
|
|
threshold
|
||
|
|
|
||
|
|
setAlarm(2) indicates that the crossing type alarm was a set
|
||
|
|
threshold
|
||
|
|
|
||
|
|
clearAlarm(3) indicates that the crossing type alarm was a clear
|
||
|
|
threshold
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 6 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjDestinationMep OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MAC address of the Destination MEP associated the notification found
|
||
|
|
in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 7 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjPriority OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The CoS priority of the associated notification found
|
||
|
|
in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 8 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationTotalFlaps OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured value of total number of flaps occured during the
|
||
|
|
flap trap timer itnerval.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 9 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationAccTotalFlaps OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured value of total number of accumulated flaps occured during the
|
||
|
|
flap trap timer itnerval.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 10 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjThresholdLastValue OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The measured value of the object at the time of the generation of the
|
||
|
|
last Notification during the flap trap timer interval.
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 11 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjCurrentState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
aboveAlarm (1),
|
||
|
|
setAlarm (2),
|
||
|
|
clearAlarm (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Current Notification Crossing Type of the
|
||
|
|
object that caused the generation
|
||
|
|
of the notification at the end of timer interval
|
||
|
|
from the jnxSoamLmThresholdEntry or
|
||
|
|
jnxSoamDmThresholdEntry.
|
||
|
|
|
||
|
|
aboveAlarm(1) indicates that the crossing type alarm was an above
|
||
|
|
threshold
|
||
|
|
|
||
|
|
setAlarm(2) indicates that the crossing type alarm was a set
|
||
|
|
threshold
|
||
|
|
|
||
|
|
clearAlarm(3) indicates that the crossing type alarm was a clear
|
||
|
|
threshold
|
||
|
|
|
||
|
|
This object is only used for the notification.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 12 }
|
||
|
|
|
||
|
|
jnxSoamPmNotificationObjLastDateAndTime OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the time and date at the time that
|
||
|
|
the last notification event is detected, at the end of flap timer interval
|
||
|
|
and not the time of the first notification
|
||
|
|
generation.
|
||
|
|
|
||
|
|
This object is used only for notifications. The mechanism to set and keep
|
||
|
|
current the date and time is not specified.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotificationObj 13 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- NOTIFICATIONS (TRAPS)
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
jnxSoamLmSessionStartStopAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
jnxSoamLmCfgSessionStatus,
|
||
|
|
jnxSoamPmNotificationObjDateAndTime,
|
||
|
|
jnxSoamPmNotificationObjDestinationMep
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An jnxSoamLmSessionStartStopAlarm notification is sent when the state of
|
||
|
|
jnxSoamLmCfgSessionStatus changes.
|
||
|
|
|
||
|
|
The management entity that receives the notification can identify
|
||
|
|
the system from the network source address of the notification,
|
||
|
|
and can identify the individual PM session reporting the start/stop
|
||
|
|
by the indices in the OID jnxSoamLmCfgSessionStatus, including
|
||
|
|
dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, and
|
||
|
|
jnxSoamLmCfgIndex.
|
||
|
|
|
||
|
|
An agent is not to generate more than one jnxSoamLmSessionStartStopAlarm
|
||
|
|
'notification-event' in a given time interval per LM session as specified
|
||
|
|
by the jnxSoamPmNotificationCfgAlarmInterval. A 'notification-event' is
|
||
|
|
the transmission of a single notification to a list of notification
|
||
|
|
destinations.
|
||
|
|
|
||
|
|
If additional operational state changes occur within the
|
||
|
|
jnxSoamPmNotificationCfgAlarmInterval period, then notification
|
||
|
|
generation for these changes are be suppressed by the agent until
|
||
|
|
the current alarm interval expires. At the end of an alarm interval
|
||
|
|
period, one notification-event is generated if any operational
|
||
|
|
state changes occurred since the start of the alarm interval period. In
|
||
|
|
such a case, another alarm interval period is started right away.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotifications 1 }
|
||
|
|
|
||
|
|
jnxSoamDmSessionStartStopAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
jnxSoamDmCfgSessionStatus,
|
||
|
|
jnxSoamPmNotificationObjDateAndTime,
|
||
|
|
jnxSoamPmNotificationObjDestinationMep
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An jnxSoamDmSessionStartStopAlarm notification is sent when the state of
|
||
|
|
jnxSoamDmCfgSessionStatus changes.
|
||
|
|
|
||
|
|
The management entity that receives the notification can identify
|
||
|
|
the system from the network source address of the notification,
|
||
|
|
and can identify the individual PM session reporting the start/stop
|
||
|
|
by the indices in the OID jnxSoamDmCfgSessionStatus, including
|
||
|
|
dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, and
|
||
|
|
jnxSoamDmCfgIndex.
|
||
|
|
|
||
|
|
An agent is not to generate more than one jnxSoamDmSessionStartStopAlarm
|
||
|
|
'notification-event' in a given time interval per DM session as specified
|
||
|
|
by jnxSoamPmNotificationCfgAlarmInterval. A 'notification-event' is the
|
||
|
|
transmission of a single notification to a list of notification
|
||
|
|
destinations.
|
||
|
|
|
||
|
|
If additional operational state changes occur within the
|
||
|
|
jnxSoamPmNotificationCfgAlarmInterval period, then notification generation
|
||
|
|
for these changes are suppressed by the agent until the current alarm
|
||
|
|
interval expires. At the end of an alarm interval period, one
|
||
|
|
notification-event is generated if any operational state changes
|
||
|
|
occurred since the start of the alarm interval period. In such a case,
|
||
|
|
another alarm interval period is started right away.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotifications 2 }
|
||
|
|
|
||
|
|
jnxSoamPmThresholdCrossingAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
jnxSoamPmNotificationObjCrossingType,
|
||
|
|
jnxSoamPmNotificationObjThresholdId,
|
||
|
|
jnxSoamPmNotificationObjThresholdConfig,
|
||
|
|
jnxSoamPmNotificationObjThresholdValue,
|
||
|
|
jnxSoamPmNotificationObjSuspect,
|
||
|
|
jnxSoamPmNotificationObjDateAndTime,
|
||
|
|
jnxSoamPmNotificationObjDestinationMep
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An jnxSoamPmThresholdCrossingAlarm notification is sent if the
|
||
|
|
following conditions are met for a particular type.
|
||
|
|
|
||
|
|
For an aboveAlarm five conditions need to be met:
|
||
|
|
|
||
|
|
a) measurement of the parameter is enabled via jnxSoamLmCfgMeasurementEnable
|
||
|
|
for a LM crossing or jnxSoamDmCfgMeasurementEnable for a DM crossing;
|
||
|
|
and
|
||
|
|
|
||
|
|
b) the parameter threshold is configured in the jnxSoamLmThresholdCfgTable
|
||
|
|
or jnxSoamDmThresholdCfgTable; and
|
||
|
|
|
||
|
|
c) the threshold crossing type of bPmThresholdAboveAlarm is enabled;
|
||
|
|
and
|
||
|
|
|
||
|
|
d) the measured value of the parameter exceeds the value configured in
|
||
|
|
the jnxSoamLmThresholdCfgTable for a LM crossing entry or
|
||
|
|
jnxSoamDmThresholdCfgTable for a DM crossing entry for a type of
|
||
|
|
bPmThresholdAboveAlarm; and
|
||
|
|
|
||
|
|
e) no previous jnxSoamPmThresholdCrossingAlarm notifications with type
|
||
|
|
aboveAlarm have been sent relating to the same threshold in the
|
||
|
|
jnxSoamLmThresholdCfgTable or jnxSoamDmThresholdCfgTable and the
|
||
|
|
same parameter, during this Measurement Interval.
|
||
|
|
|
||
|
|
For a setAlarm five conditions need to be met:
|
||
|
|
|
||
|
|
a) measurement of the parameter is enabled via jnxSoamLmCfgMeasurementEnable
|
||
|
|
for a LM crossing or jnxSoamDmCfgMeasurementEnable for a DM crossing;
|
||
|
|
and
|
||
|
|
|
||
|
|
b) the parameter threshold is configured in the jnxSoamLmThresholdCfgTable
|
||
|
|
or jnxSoamDmThresholdCfgTable; and
|
||
|
|
|
||
|
|
c) the threshold crossing type of bPmThresholdSetClearAlarm is enabled;
|
||
|
|
and
|
||
|
|
|
||
|
|
d) the measured value of the parameter exceeds the value configured in
|
||
|
|
the jnxSoamLmThresholdCfgTable for a LM crossing entry or
|
||
|
|
jnxSoamDmThresholdCfgTable for a DM crossing entry for a type of
|
||
|
|
bPmThresholdSetClearAlarm for the Measurement Interval; and
|
||
|
|
|
||
|
|
e) the previous measured value did not
|
||
|
|
exceed the value configured in the jnxSoamLmThresholdCfgTable for
|
||
|
|
a LM crossing entry or jnxSoamDmThresholdCfgTable for a DM crossing
|
||
|
|
entry for a type of bPmThresholdSetClearAlarm.
|
||
|
|
|
||
|
|
For a clearAlarm five conditions need to be met:
|
||
|
|
|
||
|
|
a) measurement of the parameter is enabled via jnxSoamLmCfgMeasurementEnable
|
||
|
|
for a LM crossing or jnxSoamDmCfgMeasurementEnable for a DM crossing;
|
||
|
|
and
|
||
|
|
|
||
|
|
b) the parameter threshold is configured in the jnxSoamLmThresholdCfgTable
|
||
|
|
or jnxSoamDmThresholdCfgTable; and
|
||
|
|
|
||
|
|
c) the threshold crossing type of bPmThresholdSetClearAlarm is enabled;
|
||
|
|
and
|
||
|
|
|
||
|
|
d) the measured value of the parameter did not exceed the value configured
|
||
|
|
in the jnxSoamLmThresholdCfgTable for a LM crossing entry or
|
||
|
|
jnxSoamDmThresholdCfgTable for a DM crossing entry for a type of
|
||
|
|
bPmThresholdSetClearAlarm for the Measurement Interval; and
|
||
|
|
|
||
|
|
e) the previous measured value did
|
||
|
|
exceed the value configured in the jnxSoamLmThresholdCfgTable for
|
||
|
|
a LM crossing entry or jnxSoamDmThresholdCfgTable for a DM crossing
|
||
|
|
entry for a type of bPmThresholdSetClearAlarm.
|
||
|
|
|
||
|
|
In the case of thresholds applied to a maximum or average measurement
|
||
|
|
counter, the previous measured value is the value of the counter at the
|
||
|
|
end of the preceding Measurement Interval. In the case of thresholds
|
||
|
|
applied to the last measured value, it is the previous measured value.
|
||
|
|
|
||
|
|
The management entity that receives the notification can identify
|
||
|
|
the system from the network source address of the notification,
|
||
|
|
and can identify the LM or DM session reporting the threshold
|
||
|
|
crossing by the indices in the jnxSoamPmNotificationCfgThresholdId object,
|
||
|
|
including dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier,
|
||
|
|
and the jnxSoamLmCfgIndex or jnxSoamDmCfgIndex.
|
||
|
|
|
||
|
|
An agent is not to generate more than one jnxSoamLmThresholdCrossingAlarm
|
||
|
|
'notification-event' of a given type per LM or DM session as specified
|
||
|
|
by jnxSoamPmNotificationCfgAlarmInterval. A 'notification-event' is the
|
||
|
|
transmission of a single notification to a list of notification
|
||
|
|
destinations.
|
||
|
|
|
||
|
|
If additional threshold crossing events occur within the
|
||
|
|
jnxSoamPmNotificationCfgAlarmInterval period, then notification
|
||
|
|
generation for these changes are suppressed by the agent until
|
||
|
|
the current alarm interval expires. At the end of an alarm interval
|
||
|
|
period, one notification-event is generated if any threshold
|
||
|
|
crossing events occurred since the start of the alarm interval period.
|
||
|
|
In such a case, another alarm interval period is started right away.
|
||
|
|
"
|
||
|
|
::= { jnxSoamPmNotifications 3 }
|
||
|
|
|
||
|
|
jnxSoamPmThresholdFlapAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
jnxSoamPmNotificationObjThresholdId,
|
||
|
|
jnxSoamPmNotificationObjThresholdConfig,
|
||
|
|
jnxSoamPmNotificationObjThresholdLastValue,
|
||
|
|
jnxSoamPmNotificationTotalFlaps,
|
||
|
|
jnxSoamPmNotificationAccTotalFlaps,
|
||
|
|
jnxSoamPmNotificationObjCurrentState,
|
||
|
|
jnxSoamPmNotificationObjDestinationMep
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" The jnxSoamPmThresholdFlapAlarm is sent when the CFM Threshold Flap
|
||
|
|
Notification feature is enabled which would dampen the
|
||
|
|
jnxSoamPmThresholdCrossingAlarm sent to NMS. The jnxSoamPmThresholdFlapAlarm
|
||
|
|
gives details about Flaps occured during the time interval. The
|
||
|
|
jnxSoamPmThresholdFlapAlarm is sent for the follwing below conditions
|
||
|
|
a) Trap is sent if one flap sequence has occured
|
||
|
|
b) Trap is sent if threshold or timer changes happens.
|
||
|
|
c) Trap is sent when finite iterations counts expires.
|
||
|
|
"
|
||
|
|
|
||
|
|
::= { jnxSoamPmNotifications 4 }
|
||
|
|
END
|