mibs/MIBS/junos/JUNIPER-SONET-MIB

205 lines
7.1 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Juniper Enterprise Specific MIB: Sonet Interface Management MIB Extension
--
-- Copyright (c) 2002-2003, 2006, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-SONET-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
jnxMibs, jnxSonetNotifications
FROM JUNIPER-SMI
ifIndex, ifDescr
FROM IF-MIB;
jnxSonet MODULE-IDENTITY
LAST-UPDATED "200307182154Z" -- Fri Jul 18 21:54:02 2003 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This MIB module defines objects used for managing the
sonet/sdh interfaces of Juniper products."
REVISION "200212120000Z"
DESCRIPTION
"Added sdh-specific alarms to JnxSonetAlarmId."
REVISION "200208080000Z"
DESCRIPTION
"Initial revision."
::= { jnxMibs 20 }
JnxSonetAlarmId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies specific sonet/sdh alarms that may exist on an
interface."
SYNTAX BITS {
sonetLolAlarm(0), -- Sonet Loss of light alarm
sonetPllAlarm(1), -- Sonet PLL lock alarm
sonetLofAlarm(2), -- Sonet Loss of frame alarm
sonetLosAlarm(3), -- Sonet Loss of signal alarm
sonetSefAlarm(4), -- Sonet Severely errored frame alarm
sonetLaisAlarm(5), -- Sonet Line AIS alarm
sonetPaisAlarm(6), -- Sonet Path AIS alarm
sonetLopAlarm(7), -- Sonet Loss of pointer alarm
sonetBerrSdAlarm(8), -- Sonet bit err. rate defect alarm,
sonetBerrSfAlarm(9), -- Sonet bit err. rate fault alarm,
sonetLrdiAlarm(10), -- Sonet Line Remote Defect Ind. alarm
sonetPrdiAlarm(11), -- Sonet Path Remote Defect Ind. alarm
sonetReiAlarm(12), -- Sonet Remote Error Ind. alarm
sonetUneqAlarm(13), -- Sonet Unequipped alarm
sonetPmisAlarm(14), -- Sonet Path mismatch alarm (PLM)
sonetLocAlarm(15), -- Sonet Loss of Cell delineation alarm
sonetVaisAlarm(16), -- Sonet VT AIS alarm
sonetVlopAlarm(17), -- Sonet VT Loss Of Pointer alarm
sonetVrdiAlarm(18), -- Sonet VT Remote Defect Ind. alarm
sonetVuneqAlarm(19), -- Sonet VT Unequipped alarm
sonetVmisAlarm(20), -- Sonet VT label mismatch error
sonetVlocAlarm(21), -- Sonet VT Loss of Cell delineation
sdhLolAlarm(22), -- SDH Loss of light alarm
sdhPllAlarm(23), -- SDH PLL lock alarm
sdhLofAlarm(24), -- SDH Loss of frame alarm
sdhLosAlarm(25), -- SDH Loss of signal alarm
sdhOofAlarm(26), -- SDH Out of frame alarm
sdhMsAisAlarm(27), -- SDH Multiplex Section AIS alarm
sdhHpAisAlarm(28), -- SDH HP AIS alarm
sdhLopAlarm(29), -- SDH Loss of pointer alarm
sdhBerrSdAlarm(30), -- SDH bit err. rate defect alarm,
sdhBerrSfAlarm(31), -- SDH bit err. rate fault alarm,
sdhMsFerfAlarm(32), -- SDH Multiplex Section FERF alarm
sdhHpFerfAlarm(33), -- SDH HP FERF alarm
sdhMsFebeAlarm(34), -- SDH Multiplex Section FEBE alarm
sdhHpUneqAlarm(35), -- SDH HP Unequipped alarm
sdhHpMisAlarm(36), -- SDH HP mismatch alarm (PLM)
sdhLocAlarm(37) -- SDH Loss of Cell delineation alarm
}
--
-- Sonet alarm information
--
jnxSonetAlarms OBJECT IDENTIFIER ::= { jnxSonet 1 }
jnxSonetAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSonetAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about alarms on all the sonet/sdh physical
interfaces on this router."
::= { jnxSonetAlarms 1 }
jnxSonetAlarmEntry OBJECT-TYPE
SYNTAX JnxSonetAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about alarms on a sonet/sdh physical interface on
this router."
INDEX { ifIndex }
::= { jnxSonetAlarmTable 1 }
JnxSonetAlarmEntry ::=
SEQUENCE {
jnxSonetCurrentAlarms
JnxSonetAlarmId,
jnxSonetLastAlarmId
JnxSonetAlarmId,
jnxSonetLastAlarmTime
TimeTicks,
jnxSonetLastAlarmDate
DateAndTime,
jnxSonetLastAlarmEvent
INTEGER
}
jnxSonetCurrentAlarms OBJECT-TYPE
SYNTAX JnxSonetAlarmId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies all the active sonet/sdh alarms on this
interface."
::= { jnxSonetAlarmEntry 1 }
jnxSonetLastAlarmId OBJECT-TYPE
SYNTAX JnxSonetAlarmId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifies the sonet/sdh alarm that most recently
was set or cleared."
::= { jnxSonetAlarmEntry 2 }
jnxSonetLastAlarmTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the management subsystem learned
of the last alarm event."
::= { jnxSonetAlarmEntry 3 }
jnxSonetLastAlarmDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system date and time when the management subsystem learned
of the last alarm event."
::= { jnxSonetAlarmEntry 4 }
jnxSonetLastAlarmEvent OBJECT-TYPE
SYNTAX INTEGER {
none (1),
set (2),
cleared (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the last alarm event set a new alarm
or cleared an existing alarm."
::= { jnxSonetAlarmEntry 5 }
--
-- Configuration Management Notifications
--
jnxSonetNotificationPrefix OBJECT IDENTIFIER ::= { jnxSonetNotifications 0 }
jnxSonetAlarmSet NOTIFICATION-TYPE
OBJECTS { ifDescr,
jnxSonetLastAlarmId,
jnxSonetCurrentAlarms,
jnxSonetLastAlarmDate }
STATUS current
DESCRIPTION
"Notification of a recently set sonet/sdh alarm."
::= { jnxSonetNotificationPrefix 1 }
jnxSonetAlarmCleared NOTIFICATION-TYPE
OBJECTS { ifDescr,
jnxSonetLastAlarmId,
jnxSonetCurrentAlarms,
jnxSonetLastAlarmDate }
STATUS current
DESCRIPTION
"Notification of a recently cleared sonet/sdh alarm."
::= { jnxSonetNotificationPrefix 2 }
END