mibs/MIBS/junos/MCAST-VPN-MIB

1032 lines
36 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ==============================
-- jnxMVPN-MIB: JUNIPER MVPN-MIB
--
-- ==============================
-- Note: This MIB is based on draft-zzhang-mvpn-mib-02 and is temporary & experimental.
-- This may be replaced in future with a standard MVPN MIB from IETF.
MCAST-VPN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowPointer, RowStatus, TimeStamp, TimeInterval
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MplsLabel
FROM MPLS-TC-STD-MIB
mplsVpnVrfName, MplsVpnRouteDistinguisher
FROM MPLS-VPN-MIB
ipMRouteEntry
FROM IPMROUTE-STD-MIB
-- Juniper specific
jnxMibs
FROM JUNIPER-SMI
jnxMvpnExperiment -- *** JNX ***
FROM JUNIPER-EXPERIMENT-MIB
JnxL2L3VpnMcastProviderTunnelType
FROM L2L3-VPN-MCAST-MIB
;
jnxMvpnMIB MODULE-IDENTITY
LAST-UPDATED "201307121200Z" -- 12 July 2013 12:00:00 GMT
ORGANIZATION "IETF Layer-3 Virtual Private
Networks Working Group."
CONTACT-INFO
" Jeffrey (Zhaohui) Zhang
zzhang@juniper.net
Comments and discussion to l3vpn@ietf.org"
DESCRIPTION
"This MIB contains managed object definitions for
multicast in BGP/MPLS IP VPNs defined by [MVPN].
Copyright (C) The Internet Society (2012)."
-- Revision history.
REVISION "201301071200Z" -- 07 January 2013 12:00:00 GMT
DESCRIPTION
"Initial version of the draft."
::= { jnxMvpnExperiment 1 } -- number to be assigned
-- Top level components of this MIB.
jnxMvpnNotifications OBJECT IDENTIFIER ::= { jnxMvpnMIB 0 }
-- tables, scalars
jnxMvpnObjects OBJECT IDENTIFIER ::= { jnxMvpnMIB 1 }
-- conformance
-- jnxMvpnConformance OBJECT IDENTIFIER ::= { jnxMvpnMIB 2 }
jnxMvpnScalars OBJECT IDENTIFIER ::= { jnxMvpnObjects 1 }
jnxMvpnGeneral OBJECT IDENTIFIER ::= { jnxMvpnObjects 2 }
jnxMvpnConfig OBJECT IDENTIFIER ::= { jnxMvpnObjects 3 }
jnxMvpnStates OBJECT IDENTIFIER ::= { jnxMvpnObjects 4 }
-- Scalar Objects
jnxMvpnMvrfNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv4 or IPv6 or mLDP C-Multicast
that are present in this device."
::= { jnxMvpnScalars 1 }
jnxMvpnMvrfNumberV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv4 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 2 }
jnxMvpnMvrfNumberV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv6 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 3 }
jnxMvpnMvrfNumberPimV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM-MVPN MVRFs for IPv4 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 4 }
jnxMvpnMvrfNumberPimV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM-MVPN MVRFs for IPv6 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 5 }
jnxMvpnMvrfNumberBgpV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for IPv4 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 6 }
jnxMvpnMvrfNumberBgpV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for IPv6 C-Multicast that are present
in this device."
::= { jnxMvpnScalars 7 }
jnxMvpnMvrfNumberMldp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for mLDP C-Multicast that are present
in this device."
::= { jnxMvpnScalars 8 }
jnxMvpnNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this object is TRUE, then the generation of all
notifications defined in this MIB is enabled."
DEFVAL { false }
::= { jnxMvpnScalars 9 }
-- General MVRF Information Table
jnxMvpnGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the general information about the MVRFs
present in this device."
::= { jnxMvpnGeneral 1 }
jnxMvpnGeneralEntry OBJECT-TYPE
SYNTAX JnxMvpnGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every MVRF in the
device."
INDEX { mplsVpnVrfName }
::= { jnxMvpnGeneralTable 1 }
JnxMvpnGeneralEntry ::= SEQUENCE {
jnxMvpnGenOperStatusChange INTEGER,
jnxMvpnGenOperChangeTime TimeStamp,
jnxMvpnGenCmcastRouteProtocolV4 INTEGER,
jnxMvpnGenCmcastRouteProtocolV6 INTEGER,
jnxMvpnGenIpmsiConfigV4 RowPointer,
jnxMvpnGenIpmsiConfigV6 RowPointer,
jnxMvpnGenInterAsPmsiConfigV4 RowPointer,
jnxMvpnGenInterAsPmsiConfigV6 RowPointer,
jnxMvpnGenRowStatus RowStatus
}
jnxMvpnGenOperStatusChange OBJECT-TYPE
SYNTAX INTEGER { createdMvrf(1),
deletedMvrf(2),
modifiedMvrfIpmsiConfig(3),
modifiedMvrfSpmsiConfig(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the last operational change that
happened for the given MVRF.
createdMvrf - indicates that the MVRF was created in the
device.
deletedMvrf - indicates that the MVRF was deleted from the
device. A row in this table will never have
mvpnGenOperStatusChange equal to deletedMvrf(2),
because in that case the row itself will be deleted from the
table. This value for mvpnGenOperStatusChange is defined
mainly for use in mvpnMvrfChange notification.
modifiedMvrfIpmsiConfig - indicates that the I-PMSI
for the MVRF was configured, deleted or changed.
modifiedMvrfSpmsiConfig - indicates that the S-PMSI
for the MVRF was configured, deleted or changed."
DEFVAL { createdMvrf }
::= { jnxMvpnGeneralEntry 1 }
jnxMvpnGenOperChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the last operational change for the MVRF in
question took place. The last operational change is specified
by mvpnGenOperStatusChange."
::= { jnxMvpnGeneralEntry 2 }
jnxMvpnGenCmcastRouteProtocolV4 OBJECT-TYPE
SYNTAX INTEGER { pim (1),
bgp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol used to signal IPv4 C-multicast states across the
provider core.
pim(1): PIM (PIM-MVPN).
bgp(2): BGP (BGP-MVPN)."
::= { jnxMvpnGeneralEntry 3 }
jnxMvpnGenCmcastRouteProtocolV6 OBJECT-TYPE
SYNTAX INTEGER { pim (1),
bgp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol used to signal IPv6 C-multicast states across the
provider core.
pim(1): PIM (PIM-MVPN).
bgp(2): BGP (BGP-MVPN)."
::= { jnxMvpnGeneralEntry 4 }
jnxMvpnGenIpmsiConfigV4 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This points to a row in MvpnPmsiConfigTable,
for I-PMSI configuration for IPv4."
::= { jnxMvpnGeneralEntry 5 }
jnxMvpnGenIpmsiConfigV6 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This points to a row in MvpnPmsiConfigTable,
for I-PMSI configuration for IPv6."
::= { jnxMvpnGeneralEntry 6 }
jnxMvpnGenInterAsPmsiConfigV4 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This points to a row in MvpnPmsiConfigTable,
for inter-as I-PMSI configuration for IPv4, in case of segmented
inter-as provider tunnels."
::= { jnxMvpnGeneralEntry 7 }
jnxMvpnGenInterAsPmsiConfigV6 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This points to a row in MvpnPmsiConfigTable,
for inter-as I-PMSI configuration for IPv6, in case of segmented
inter-as provider tunnels."
::= { jnxMvpnGeneralEntry 8 }
jnxMvpnGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used to create or delete a row in this table."
::= { jnxMvpnGeneralEntry 9 }
-- General BGP-MVPN table
jnxMvpnBgpGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnBgpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the mvpnGeneralTable and is for BGP-MVPN
specific information."
::= { jnxMvpnGeneral 2 }
jnxMvpnBgpGeneralEntry OBJECT-TYPE
SYNTAX JnxMvpnBgpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mvpnBgpGeneralEntry matches and augments an mvpnGeneralEntry
for a BGP-MVPN instance, with BGP-MVPN specific informatoin."
AUGMENTS { jnxMvpnGeneralEntry }
::= { jnxMvpnBgpGeneralTable 1 }
JnxMvpnBgpGeneralEntry ::= SEQUENCE {
jnxMvpnBgpGenMode INTEGER,
jnxMvpnBgpGenUmhSelection INTEGER,
jnxMvpnBgpGenSiteType INTEGER,
jnxMvpnBgpGenCmcastImportRt MplsVpnRouteDistinguisher,
jnxMvpnBgpGenSrcAs Unsigned32,
jnxMvpnBgpGenSptnlLimit Unsigned32
}
jnxMvpnBgpGenMode OBJECT-TYPE
SYNTAX INTEGER {
rpt-spt (1),
spt-only (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For two different BGP-MVPN modes:
rpt-spt(1): intersite-site shared tree mode
spt-only(2): inter-site source-only tree mode."
::= { jnxMvpnBgpGeneralEntry 1}
jnxMvpnBgpGenUmhSelection OBJECT-TYPE
SYNTAX INTEGER {
highest-pe-address (1),
c-root-group-hashing (2),
ucast-umh-route (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UMH selection method for this mvpn, as specified in section
5.1.3 of [MVPN]:
highest-pe-address (1): PE with the highest address
c-root-group-hashing (2): hashing based on (c-root, c-group)
uncast-umh-route (3): per ucast route towards c-root"
::= { jnxMvpnBgpGeneralEntry 2}
jnxMvpnBgpGenSiteType OBJECT-TYPE
SYNTAX INTEGER {
sender-receiver (1),
receiver-only (2),
sender-only (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this site is a receiver-only site or not.
sender-receiver (1): both sender and receiver site.
receiver-only (2): receiver-only site.
sender-only (3): sender-only site."
::= { jnxMvpnBgpGeneralEntry 3}
jnxMvpnBgpGenCmcastImportRt OBJECT-TYPE
SYNTAX MplsVpnRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The C-multicast Import RT that this device adds to
unicast vpn routes that it advertises for this mvpn."
::= { jnxMvpnBgpGeneralEntry 4}
jnxMvpnBgpGenSrcAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source AS number in Source AS Extended Community that this device
adds to the unicast vpn routes that it advertises for this mvpn."
::= { jnxMvpnBgpGeneralEntry 5}
jnxMvpnBgpGenSptnlLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of selective provider tunnels this device allows
for this mvpn."
::= { jnxMvpnBgpGeneralEntry 6}
-- PMSI Configuration Table
jnxMvpnPmsiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnPmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the configured PMSIs."
::= { jnxMvpnConfig 1 }
jnxMvpnPmsiConfigEntry OBJECT-TYPE
SYNTAX JnxMvpnPmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each PMSI configured
on this router. It can be referred to by either I-PMSI
configuration (in mvpnGeneralEntry) or S-PMSI configuration
(in mvpnSpmsiConfigEntry)"
INDEX { jnxMvpnPmsiConfigTunnelType,
jnxMvpnPmsiConfigTunnelAuxInfo,
jnxMvpnPmsiConfigTunnelPimGroupAddressType,
jnxMvpnPmsiConfigTunnelPimGroupAddress,
jnxMvpnPmsiConfigTunnelOrTemplateName }
::= { jnxMvpnPmsiConfigTable 1 }
JnxMvpnPmsiConfigEntry ::= SEQUENCE {
jnxMvpnPmsiConfigTunnelType JnxL2L3VpnMcastProviderTunnelType,
jnxMvpnPmsiConfigTunnelAuxInfo Unsigned32,
jnxMvpnPmsiConfigTunnelPimGroupAddressType InetAddressType,
jnxMvpnPmsiConfigTunnelPimGroupAddress InetAddress,
jnxMvpnPmsiConfigTunnelOrTemplateName SnmpAdminString,
jnxMvpnPmsiConfigEncapsType INTEGER,
jnxMvpnPmsiConfigRowStatus RowStatus
}
jnxMvpnPmsiConfigTunnelType OBJECT-TYPE
SYNTAX JnxL2L3VpnMcastProviderTunnelType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of tunnel used to instantiate the PMSI."
::= { jnxMvpnPmsiConfigEntry 1 }
jnxMvpnPmsiConfigTunnelAuxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional tunnel information depending on the type.
pim: In case of S-PMSI, number of groups starting at
mvpnPmsiConfigTunnelPimGroupAddress.
This allows a range of PIM provider tunnel
group addresses to be specified in S-PMSI case.
In I-PMSI case, it must be 1.
rsvp-p2mp: 1 for statically specified rsvp-p2mp tunnel
2 for dynamically created rsvp-p2mp tunnel
ingress-replication:
1 for using any existing p2p/mp2p lsp
2 for dynamically creating new p2p lsp"
::= { jnxMvpnPmsiConfigEntry 2 }
jnxMvpnPmsiConfigTunnelPimGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In case of PIM provider tunnel, the type of tunnel address."
::= { jnxMvpnPmsiConfigEntry 3 }
jnxMvpnPmsiConfigTunnelPimGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In case of PIM provider tunnel, the provider tunnel address."
::= { jnxMvpnPmsiConfigEntry 4 }
jnxMvpnPmsiConfigTunnelOrTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tunnel name or template name used to create tunnels.
Depending on mvpnPmsiConfigTunnelType and
mvpnPmsiConfigTunnelAuxInfo:
dynamically created rsvp-p2mp tunnel: template name
statically specified rsvp-p2mp tunnel: tunnel name
ingress-replication using
dynamically created lsps: template name
other: null"
::= { jnxMvpnPmsiConfigEntry 5 }
jnxMvpnPmsiConfigEncapsType OBJECT-TYPE
SYNTAX INTEGER { greIp (1),
ipIp (2),
mpls (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation type to be used, in case of PIM tunnel or
ingress-replication."
::= { jnxMvpnPmsiConfigEntry 6 }
jnxMvpnPmsiConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to create/modify/delete a row in this table."
::= { jnxMvpnPmsiConfigEntry 7 }
-- S-PMSI configuration table
jnxMvpnSpmsiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnSpmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies S-PMSI configuration."
::= { jnxMvpnConfig 2 }
jnxMvpnSpmsiConfigEntry OBJECT-TYPE
SYNTAX JnxMvpnSpmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each S-PMSI configuration."
INDEX { mplsVpnVrfName,
jnxMvpnSpmsiConfigCmcastAddressType,
jnxMvpnSpmsiConfigCmcastGroupAddress,
jnxMvpnSpmsiConfigCmcastGroupPrefixLen,
jnxMvpnSpmsiConfigCmcastSourceAddress,
jnxMvpnSpmsiConfigCmcastSourcePrefixLen }
::= { jnxMvpnSpmsiConfigTable 1 }
JnxMvpnSpmsiConfigEntry ::= SEQUENCE {
jnxMvpnSpmsiConfigCmcastAddressType InetAddressType,
jnxMvpnSpmsiConfigCmcastGroupAddress InetAddress,
jnxMvpnSpmsiConfigCmcastGroupPrefixLen Unsigned32,
jnxMvpnSpmsiConfigCmcastSourceAddress InetAddress,
jnxMvpnSpmsiConfigCmcastSourcePrefixLen Unsigned32,
jnxMvpnSpmsiConfigThreshold Unsigned32,
jnxMvpnSpmsiConfigPmsiPointer RowPointer,
jnxMvpnSpmsiConfigRowStatus RowStatus
}
jnxMvpnSpmsiConfigCmcastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of C-multicast address"
::= { jnxMvpnSpmsiConfigEntry 1 }
jnxMvpnSpmsiConfigCmcastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast group address"
::= { jnxMvpnSpmsiConfigEntry 2 }
jnxMvpnSpmsiConfigCmcastGroupPrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast group address prefix length.
A group 0 (or ::0) with prefix length 32 (or 128)
indicates wildcard group, while a group 0 (or ::0)
with prefix length 0 indicates any group."
::= { jnxMvpnSpmsiConfigEntry 3 }
jnxMvpnSpmsiConfigCmcastSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast source address"
::= { jnxMvpnSpmsiConfigEntry 4 }
jnxMvpnSpmsiConfigCmcastSourcePrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"C-multicast source address prefix length.
A source 0 (or ::0) with prefix length 32 (or 128)
indicates a wildcard source, while a source 0 (or ::0)
with prefix length 0 indicates any source."
::= { jnxMvpnSpmsiConfigEntry 5 }
jnxMvpnSpmsiConfigThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth threshold value which when exceeded for a
multicast routing entry in the given MVRF, triggers usage
of S-PMSI."
::= { jnxMvpnSpmsiConfigEntry 6 }
jnxMvpnSpmsiConfigPmsiPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This points to a row in MvpnPmsiConfigTable,
to specify tunnel attributes."
::= { jnxMvpnSpmsiConfigEntry 7 }
jnxMvpnSpmsiConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to create/modify/delete a row in this table."
::= { jnxMvpnSpmsiConfigEntry 8 }
-- Table of intra-as I-PMSIs advertised/received
jnxMvpnIpmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for all advertised/received I-PMSI
advertisements."
::= { jnxMvpnStates 1 }
jnxMvpnIpmsiEntry OBJECT-TYPE
SYNTAX JnxMvpnIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table corresponds to an I-PMSI
advertisement that is advertised/received on this router.
This represents all the sender PEs in the MVPN,
with the provider tunnel they use to send traffic."
INDEX { mplsVpnVrfName,
jnxMvpnIpmsiAfi,
jnxMvpnIpmsiRD,
jnxMvpnIpmsiOrigAddrType,
jnxMvpnIpmsiOrigAddress }
::= { jnxMvpnIpmsiTable 1 }
JnxMvpnIpmsiEntry ::= SEQUENCE {
jnxMvpnIpmsiAfi Unsigned32,
jnxMvpnIpmsiRD MplsVpnRouteDistinguisher,
jnxMvpnIpmsiOrigAddrType InetAddressType,
jnxMvpnIpmsiOrigAddress InetAddress,
jnxMvpnIpmsiUpTime TimeInterval,
jnxMvpnIpmsiAttribute RowPointer
}
jnxMvpnIpmsiAfi OBJECT-TYPE
SYNTAX Unsigned32 (1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family this I-PMSI is for.
1 - IPv4
2 - IPv6"
::= { jnxMvpnIpmsiEntry 1 }
jnxMvpnIpmsiRD OBJECT-TYPE
SYNTAX MplsVpnRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Route Distinguisher in this I-PMSI."
::= { jnxMvpnIpmsiEntry 2 }
jnxMvpnIpmsiOrigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of mvpnIpmsiOrigAddress."
::= { jnxMvpnIpmsiEntry 3 }
jnxMvpnIpmsiOrigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP address of the device that originated the I-PMSI."
::= { jnxMvpnIpmsiEntry 4 }
jnxMvpnIpmsiUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this I-PMSI was first
advertised/received by the device."
::= { jnxMvpnIpmsiEntry 5 }
jnxMvpnIpmsiAttribute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Points to a row in the mvpnPmsiTunnelAttributeTable."
::= { jnxMvpnIpmsiEntry 6 }
-- Table of inter-as I-PMSIs advertised/received
jnxMvpnInterasIpmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnInterasIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for all advertised/received inter-as I-PMSI
advertisements."
::= { jnxMvpnStates 2 }
jnxMvpnInterasIpmsiEntry OBJECT-TYPE
SYNTAX JnxMvpnInterasIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table corresponds to an inter-as I-PMSI
advertisement that is advertised/received on this router.
This represents all the ASes in the MVPN,
with the provider tunnel used to send traffic to."
INDEX { mplsVpnVrfName,
jnxMvpnInterasIpmsiAfi,
jnxMvpnInterasIpmsiRD,
jnxMvpnInterasIpmsiSrcAs }
::= { jnxMvpnInterasIpmsiTable 1 }
JnxMvpnInterasIpmsiEntry ::= SEQUENCE {
jnxMvpnInterasIpmsiAfi Unsigned32,
jnxMvpnInterasIpmsiRD MplsVpnRouteDistinguisher,
jnxMvpnInterasIpmsiSrcAs Unsigned32,
jnxMvpnInterasIpmsiAttribute RowPointer
}
jnxMvpnInterasIpmsiAfi OBJECT-TYPE
SYNTAX Unsigned32 (1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family this I-PMSI is for.
1 - IPv4
2 - IPv6"
::= { jnxMvpnInterasIpmsiEntry 1 }
jnxMvpnInterasIpmsiRD OBJECT-TYPE
SYNTAX MplsVpnRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Route Distinguisher in this inter-as I-PMSI."
::= { jnxMvpnInterasIpmsiEntry 2 }
jnxMvpnInterasIpmsiSrcAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source-as in this inter-as I-PMSI."
::= { jnxMvpnInterasIpmsiEntry 3 }
jnxMvpnInterasIpmsiAttribute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Points to a row in the mvpnPmsiTunnelAttributeTable."
::= { jnxMvpnInterasIpmsiEntry 4 }
-- Table of S-PMSIs advertised/received
jnxMvpnSpmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnSpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has information about the S-PMSIs sent/received
by a device."
::= { jnxMvpnStates 3 }
jnxMvpnSpmsiEntry OBJECT-TYPE
SYNTAX JnxMvpnSpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created or updated for every S-PMSI
advertised/received in a particular MVRF."
INDEX { mplsVpnVrfName,
jnxMvpnSpmsiOrigAddrType,
jnxMvpnSpmsiOrigAddress,
jnxMvpnSpmsiCmcastAddrType,
jnxMvpnSpmsiCmcastGroup,
jnxMvpnSpmsiCmcastGroupPrefixLen,
jnxMvpnSpmsiCmcastSource,
jnxMvpnSpmsiCmcastSourcePrefixLen}
::= { jnxMvpnSpmsiTable 1 }
JnxMvpnSpmsiEntry ::= SEQUENCE {
jnxMvpnSpmsiOrigAddrType InetAddressType,
jnxMvpnSpmsiOrigAddress InetAddress,
jnxMvpnSpmsiCmcastAddrType InetAddressType,
jnxMvpnSpmsiCmcastGroup InetAddress,
jnxMvpnSpmsiCmcastGroupPrefixLen Unsigned32,
jnxMvpnSpmsiCmcastSource InetAddress,
jnxMvpnSpmsiCmcastSourcePrefixLen Unsigned32,
jnxMvpnSpmsiTunnelAttribute RowPointer,
jnxMvpnSpmsiUpTime TimeInterval,
jnxMvpnSpmsiExpTime TimeInterval,
jnxMvpnSpmsiRefCnt Unsigned32
}
jnxMvpnSpmsiOrigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of mvpnSpmsiOrigAddress."
::= { jnxMvpnSpmsiEntry 1 }
jnxMvpnSpmsiOrigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP address of the device that originated the S-PMSI."
::= { jnxMvpnSpmsiEntry 2 }
jnxMvpnSpmsiCmcastAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of mvpnSpmsiCmcastGroup/Source."
::= { jnxMvpnSpmsiEntry 3 }
jnxMvpnSpmsiCmcastGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast group address.
If it is 0 (or ::0), this is a wildcard group,
and mvpnSpmsiCmcastGroupPrefixLen must be 32 (or 128)."
::= { jnxMvpnSpmsiEntry 4 }
jnxMvpnSpmsiCmcastGroupPrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast group address prefix length."
::= { jnxMvpnSpmsiEntry 5 }
jnxMvpnSpmsiCmcastSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast source address
If it is 0 (or ::0), this is a wildcard source,
and mvpnSpmsiCmcastSourcePrefixLen must be 32 (or 128)."
::= { jnxMvpnSpmsiEntry 6 }
jnxMvpnSpmsiCmcastSourcePrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast source address prefix length."
::= { jnxMvpnSpmsiEntry 7 }
jnxMvpnSpmsiTunnelAttribute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A row pointer to the mvpnPmsiTunnelAttributeTable"
::= { jnxMvpnSpmsiEntry 8 }
jnxMvpnSpmsiUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this S-PMSI
was first advertised/received by the device."
::= { jnxMvpnSpmsiEntry 9 }
jnxMvpnSpmsiExpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For UDP-based S-PMSI signaling for PIM-MVPN,
the amount of time remaining before this
received S-PMSI Join Message expires,
or the next S-PMSI Join Message refresh is to be
advertised again from the device.
Otherwise, it is zero."
::= { jnxMvpnSpmsiEntry 10 }
jnxMvpnSpmsiRefCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of c-multicast routes that are mapped to
this S-PMSI."
::= { jnxMvpnSpmsiEntry 11 }
-- Table of multicast routes in an MVPN
jnxMvpnMrouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxMvpnMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments ipMcastRouteTable, to provide some MVPN
specific information."
::= { jnxMvpnStates 4 }
jnxMvpnMrouteEntry OBJECT-TYPE
SYNTAX JnxMvpnMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mvpnMrouteEntry matches and augments an ipMcastRouteTable,
with MVPN specific information, such as PMSI used."
AUGMENTS { ipMRouteEntry }
::= { jnxMvpnMrouteTable 1 }
JnxMvpnMrouteEntry ::= SEQUENCE {
jnxMvpnMroutePmsiPointer RowPointer,
jnxMvpnMrouteNumberOfLocalReplication Unsigned32,
jnxMvpnMrouteNumberOfRemoteReplication Unsigned32,
jnxMvpnMrouteDataRate Unsigned32
}
jnxMvpnMroutePmsiPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The I-PMSI or S-PMSI this C-multicast route is using.
This is important because an implementation may not have an
interface corresponding to a provider tunnel,
that can be used in ipMcastRouteNextHopEntry."
::= { jnxMvpnMrouteEntry 1 }
jnxMvpnMrouteNumberOfLocalReplication OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of replications to local receivers."
::= { jnxMvpnMrouteEntry 2 }
jnxMvpnMrouteNumberOfRemoteReplication OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of (local) replications to remote receivers."
::= { jnxMvpnMrouteEntry 3 }
jnxMvpnMrouteDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate for traffic following this route."
::= { jnxMvpnMrouteEntry 4 }
-- MVPN Notifications
jnxMvpnMvrfChange NOTIFICATION-TYPE
OBJECTS {
jnxMvpnGenOperStatusChange
}
STATUS current
DESCRIPTION
"A mvpnMvrfChange notification signifies a change about
a MVRF in the device. The change event can be creation of
the MVRF, deletion of the MVRF or an update on the I-PMSI
or S-PMSI configuration of the MVRF. The change event
is indicated by mvpnGenOperStatusChange embedded in
the notification. The user can then query
mvpnGeneralTable, and/or mvpnSpmsiConfigTable to
get the details of the change as necessary.
Note: Since the creation of a MVRF is often followed by
configuration of I-PMSI and/or S-PMSIs for the MVRF,
more than one (three at most) notifications for a MVRF may
be generated serially, and it is really not necessary to
generate all three of them. An agent may choose to generate a
notification for the last event only, that is for S-PMSI
configuration.
Similarly, deletion of I-PMSI and S-PMSI configuration on a
MVRF happens before a MVRF is deleted and it is recommended
that the agent send the notification for MVRF deletion
event only."
::= { jnxMvpnNotifications 2 }
END