david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junos/MPLS-MIB

1048 lines
33 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- Juniper Multi-Protocol Label Switched Paths MIB
--
-- Copyright (c) 1998-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
MPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Counter32, Counter64, IpAddress
FROM SNMPv2-SMI
DisplayString, TimeStamp
FROM SNMPv2-TC
jnxMibs
FROM JUNIPER-SMI;
mpls MODULE-IDENTITY
LAST-UPDATED "200902231445Z" -- Mon Feb 23 14:45:55 2009 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The MIB module for Multi-Protocol Label Switched Paths."
REVISION
"200902231445Z" -- Feb 23, 2009
DESCRIPTION
"Second revision; Deprecated mplsLspList, mplsLspEntry and all objects
in that SEQUENCE. Introduced new table mplsLspInfoList, mplsLspInfoEntry
to support LSP names greater than 32 characters"
::= { jnxMibs 2 }
-- For now, the MPLS MIB is an enterprise (Juniper Inc.) private MIB.
mplsInfo OBJECT IDENTIFIER ::= { mpls 1 }
mplsVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MPLS version number."
::= { mplsInfo 1 }
mplsSignalingProto OBJECT-TYPE
SYNTAX INTEGER {
none(1),
other(2),
rsvp(3),
ldp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MPLS signaling protocol."
::= { mplsInfo 2 }
mplsConfiguredLsps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of configured LSPs."
::= { mplsInfo 3 }
mplsActiveLsps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of active LSPs."
::= { mplsInfo 4 }
mplsTEInfo OBJECT IDENTIFIER ::= { mpls 2 }
mplsTEDistProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
isis(2),
ospf(3),
isis-ospf(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGP used to distribute Traffic Engineering
information and topology to each LSR for the
purpose of automatic path computation."
::= { mplsTEInfo 1 }
mplsAdminGroupList OBJECT-TYPE
SYNTAX SEQUENCE OF MplsAdminGroup
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of configured administrative groups.
Administrative groups are used to label links in
the Traffic Engineering topology in order to place
constraints (include and exclude) on LSP paths."
::= { mplsTEInfo 2 }
mplsAdminGroup OBJECT-TYPE
SYNTAX MplsAdminGroup
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping between a configured group number and its
human-readable name. The group number should be
between 0 and 31, inclusive."
INDEX { mplsAdminGroupNumber }
::= { mplsAdminGroupList 1 }
MplsAdminGroup ::=
SEQUENCE {
mplsAdminGroupNumber INTEGER,
mplsAdminGroupName DisplayString
}
mplsAdminGroupNumber OBJECT-TYPE
SYNTAX INTEGER (0..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of the administrative group."
::= { mplsAdminGroup 1 }
mplsAdminGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the administrative group."
::= { mplsAdminGroup 2 }
mplsLspList OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"******* Deprecated Object ******
List of Configured Label Switched Paths. This object
has been deprecated and replaced by mplsLspInfoList"
::= { mpls 3 }
mplsLspEntry OBJECT-TYPE
SYNTAX MplsLspEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"******* Deprecated Object ******
Entry containing information about a particular
Label Switched Path. This object has been deprecated
and replaced by mplsLspInfoEntry"
INDEX { mplsLspName }
::= { mplsLspList 1 }
MplsLspEntry ::=
SEQUENCE {
mplsLspName DisplayString,
mplsLspState INTEGER,
mplsLspOctets Counter64,
mplsLspPackets Counter64,
mplsLspAge TimeStamp,
mplsLspTimeUp TimeStamp,
mplsLspPrimaryTimeUp TimeStamp,
mplsLspTransitions Counter32,
mplsLspLastTransition TimeStamp,
mplsLspPathChanges Counter32,
mplsLspLastPathChange TimeStamp,
mplsLspConfiguredPaths Integer32,
mplsLspStandbyPaths Integer32,
mplsLspOperationalPaths Integer32,
mplsLspFrom IpAddress,
mplsLspTo IpAddress,
mplsPathName DisplayString,
mplsPathType INTEGER,
mplsPathExplicitRoute OCTET STRING,
mplsPathRecordRoute OCTET STRING,
mplsPathBandwidth Integer32,
mplsPathCOS INTEGER,
mplsPathInclude Integer32,
mplsPathExclude Integer32,
mplsPathSetupPriority INTEGER,
mplsPathHoldPriority INTEGER,
mplsPathProperties INTEGER
}
mplsLspName OBJECT-TYPE
SYNTAX DisplayString (SIZE (32))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"******* Deprecated Object ******
Name of the Label Switched Path.
This object has been deprecated and replaced by
mplsLspInfoName"
::= { mplsLspEntry 1 }
mplsLspState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2),
down(3),
notInService(4),
backupActive(5)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "The operational state of the LSP."
::= { mplsLspEntry 2 }
mplsLspOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of octets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, which by default is once every
5 minutes. If mpls statistics gathering is not
enabled, this number will not increment."
::= { mplsLspEntry 3 }
mplsLspPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, which by default is once every
5 minutes. If mpls statistics gathering is not
enabled, this number will not increment."
::= { mplsLspEntry 4 }
mplsLspAge OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The age (i.e., time from creation till now) of
this LSP in 10-millisecond periods."
::= { mplsLspEntry 5 }
mplsLspTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total time in 10-millisecond units that this
LSP has been operational. For example, the
percentage up time can be determined by computing
(mplsLspTimeUp/mplsLspAge * 100 %)."
::= { mplsLspEntry 6 }
mplsLspPrimaryTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total time in 10-millisecond units that this
LSP's primary path has been operational. For
example, the percentage contribution of the primary
path to the operational time is given by
(mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %."
::= { mplsLspEntry 7 }
mplsLspTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of state transitions (up -> down and
down -> up) this LSP has undergone."
::= { mplsLspEntry 8 }
mplsLspLastTransition OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time in 10-millisecond units since the last
transition occurred on this LSP."
::= { mplsLspEntry 9 }
mplsLspPathChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it."
::= { mplsLspEntry 10 }
mplsLspLastPathChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time in 10-millisecond units since the last
change occurred on this LSP."
::= { mplsLspEntry 11 }
mplsLspConfiguredPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of paths configured for this LSP."
::= { mplsLspEntry 12 }
mplsLspStandbyPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of standby paths configured for
this LSP."
::= { mplsLspEntry 13 }
mplsLspOperationalPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of operational paths for this LSP.
This includes the path currently active, as
well as operational standby paths."
::= { mplsLspEntry 14 }
mplsLspFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Source IP address of this LSP."
::= { mplsLspEntry 15 }
mplsLspTo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Destination IP address of this LSP."
::= { mplsLspEntry 16 }
mplsPathName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspEntry are meaningless."
::= { mplsLspEntry 17 }
mplsPathType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
primary(2),
standby(3),
secondary(4),
bypass(5)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of path that is active, i.e., a
primary path, a standby path, a generic
secondary path, or a bypass path.
The value other, primary, standby and
secondary apply to data LSPs, and are
meaningful only if mplsPathName is not
empty. The value bypass applies to
bypass tunnels. A bypass tunnel
may have an empty mplsPathName."
::= { mplsLspEntry 18 }
mplsPathExplicitRoute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space> S/L <newline>
repeated for each explicit address. The S/L character
stands for Strict/Loose route.
This field is meaningless unless mplsPathName
is not empty"
::= { mplsLspEntry 19 }
mplsPathRecordRoute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space>
repeated for each address.
This field is meaningless unless mplsPathName is
not empty"
::= { mplsLspEntry 20 }
mplsPathBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The configured bandwidth for this LSP, in units
of thousands of bits per second (Kbps). This
field is meaningless unless mplsPathName is not empty"
::= { mplsLspEntry 21 }
mplsPathCOS OBJECT-TYPE
SYNTAX INTEGER (0..7 | 255)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The configured Class Of Service on this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the
label. If the value is 255, the value in the COS
field of the label will depend on other factors.
This field is meaningless unless mplsPathName is not empty"
::= { mplsLspEntry 22 }
mplsPathInclude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have colors associated with it, and
the intersection of the link's colors and the
'include' set MUST be non-null. This field is meaningless
unless mplsPathName is not empty"
::= { mplsLspEntry 23 }
mplsPathExclude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have colors associated with it, and
the intersection of the link's colors and the
'exclude' set MUST be null. This field is meaningless
unless mplsPathName is not empty"
::= { mplsLspEntry 24 }
mplsPathSetupPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The setup priority configured for this path. This
field is meaningless unless mplsPathName is not empty"
::= { mplsLspEntry 25 }
mplsPathHoldPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The hold priority configured for this path. This
field is meaningless unless mplsPathName is not empty"
::= { mplsLspEntry 26 }
mplsPathProperties OBJECT-TYPE
SYNTAX INTEGER {
record-route(1),
adaptive(2),
cspf(4),
mergeable(8),
preemptable(16),
preemptive(32),
fast-reroute(64)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The set of configured properties for this path,
expressed as a bit map. For example, if the path
is an adaptive path, the bit corresponding to bit
value xxx is set. This field is meaningless
unless mplsPathName is not empty"
::= { mplsLspEntry 27 }
--
-- New MIB table for handling LSP names > 32 characters
--
mplsLspInfoList OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of Configured Label Switched Paths."
::= { mpls 5 }
mplsLspInfoEntry OBJECT-TYPE
SYNTAX MplsLspInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a particular
Label Switched Path."
INDEX { IMPLIED mplsLspInfoName }
::= { mplsLspInfoList 1 }
MplsLspInfoEntry ::=
SEQUENCE {
mplsLspInfoName DisplayString,
mplsLspInfoState INTEGER,
mplsLspInfoOctets Counter64,
mplsLspInfoPackets Counter64,
mplsLspInfoAge TimeStamp,
mplsLspInfoTimeUp TimeStamp,
mplsLspInfoPrimaryTimeUp TimeStamp,
mplsLspInfoTransitions Counter32,
mplsLspInfoLastTransition TimeStamp,
mplsLspInfoPathChanges Counter32,
mplsLspInfoLastPathChange TimeStamp,
mplsLspInfoConfiguredPaths Integer32,
mplsLspInfoStandbyPaths Integer32,
mplsLspInfoOperationalPaths Integer32,
mplsLspInfoFrom IpAddress,
mplsLspInfoTo IpAddress,
mplsPathInfoName DisplayString,
mplsPathInfoType INTEGER,
mplsPathInfoExplicitRoute OCTET STRING,
mplsPathInfoRecordRoute OCTET STRING,
mplsPathInfoBandwidth Integer32,
mplsPathInfoCOS INTEGER,
mplsPathInfoInclude Integer32,
mplsPathInfoExclude Integer32,
mplsPathInfoSetupPriority INTEGER,
mplsPathInfoHoldPriority INTEGER,
mplsPathInfoProperties INTEGER,
mplsLspInfoAggrOctets Counter64,
mplsLspInfoAggrPackets Counter64,
mplsPathInfoRecordRouteWithLabels OCTET STRING
}
mplsLspInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Name of the Label Switched Path."
::= { mplsLspInfoEntry 1 }
mplsLspInfoState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2),
down(3),
notInService(4),
backupActive(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational state of the LSP."
::= { mplsLspInfoEntry 2 }
mplsLspInfoOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, which by default is once every
5 minutes. If mpls statistics gathering is not
enabled, this number will not increment."
::= { mplsLspInfoEntry 3 }
mplsLspInfoPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, which by default is once every
5 minutes. If mpls statistics gathering is not
enabled, this number will not increment."
::= { mplsLspInfoEntry 4 }
mplsLspInfoAge OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age (i.e., time from creation till now) of
this LSP in 10-millisecond periods."
::= { mplsLspInfoEntry 5 }
mplsLspInfoTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this
LSP has been operational. For example, the
percentage up time can be determined by computing
(mplsLspInfoTimeUp/mplsLspInfoAge * 100 %)."
::= { mplsLspInfoEntry 6 }
mplsLspInfoPrimaryTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this
LSP's primary path has been operational. For
example, the percentage contribution of the primary
path to the operational time is given by
(mplsLspInfoPrimaryTimeUp/mplsLspInfoTimeUp * 100) %."
::= { mplsLspInfoEntry 7 }
mplsLspInfoTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions (up -> down and
down -> up) this LSP has undergone."
::= { mplsLspInfoEntry 8 }
mplsLspInfoLastTransition OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units since the last
transition occurred on this LSP."
::= { mplsLspInfoEntry 9 }
mplsLspInfoPathChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it."
::= { mplsLspInfoEntry 10 }
mplsLspInfoLastPathChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units since the last
change occurred on this LSP."
::= { mplsLspInfoEntry 11 }
mplsLspInfoConfiguredPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of paths configured for this LSP."
::= { mplsLspInfoEntry 12 }
mplsLspInfoStandbyPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of standby paths configured for
this LSP."
::= { mplsLspInfoEntry 13 }
mplsLspInfoOperationalPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of operational paths for this LSP.
This includes the path currently active, as
well as operational standby paths."
::= { mplsLspInfoEntry 14 }
mplsLspInfoFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP address of this LSP."
::= { mplsLspInfoEntry 15 }
mplsLspInfoTo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP address of this LSP."
::= { mplsLspInfoEntry 16 }
mplsPathInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspInfoEntry are meaningless."
::= { mplsLspInfoEntry 17 }
mplsPathInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
primary(2),
standby(3),
secondary(4),
bypass(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of path that is active, i.e., a
primary path, a standby path, a generic
secondary path, or a bypass path.
The value other, primary, standby and
secondary apply to data LSPs, and are
meaningful only if mplsPathInfoName is not
empty. The value bypass applies to
bypass tunnels. A bypass tunnel
may have an empty mplsPathInfoName."
::= { mplsLspInfoEntry 18 }
mplsPathInfoExplicitRoute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space> S/L <newline>
repeated for each explicit address. The S/L character
stands for Strict/Loose route.
This field is meaningless unless mplsPathInfoName
is not empty"
::= { mplsLspInfoEntry 19 }
mplsPathInfoRecordRoute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space>
repeated for each address.
This field is meaningless unless mplsPathInfoName is
not empty"
::= { mplsLspInfoEntry 20 }
mplsPathInfoBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured bandwidth for this LSP, in units
of thousands of bits per second (Kbps). This
field is meaningless unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 21 }
mplsPathInfoCOS OBJECT-TYPE
SYNTAX INTEGER (0..7 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Class Of Service on this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the
label. If the value is 255, the value in the COS
field of the label will depend on other factors.
This field is meaningless unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 22 }
mplsPathInfoInclude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have colors associated with it, and
the intersection of the link's colors and the
'include' set MUST be non-null. This field is meaningless
unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 23 }
mplsPathInfoExclude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have colors associated with it, and
the intersection of the link's colors and the
'exclude' set MUST be null. This field is meaningless
unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 24 }
mplsPathInfoSetupPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The setup priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 25 }
mplsPathInfoHoldPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 26 }
mplsPathInfoProperties OBJECT-TYPE
SYNTAX INTEGER {
record-route(1),
adaptive(2),
cspf(4),
mergeable(8),
preemptable(16),
preemptive(32),
fast-reroute(64)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of configured properties for this path,
expressed as a bit map. For example, if the path
is an adaptive path, the bit corresponding to bit
value xxx is set. This field is meaningless
unless mplsPathInfoName is not empty"
::= { mplsLspInfoEntry 27 }
mplsLspInfoAggrOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have beeen forwarded over
current LSP. This is an aggregate count of octets
forwarded over all LSP instances from the time
LSP was up. The number reported is not realtime, may
be subject to several minutes delay. The delay is
controllable by mpls statistics gathering interval,
which by default is once every 5 minutes. If mpls
statistics gathering is not enabled, this number will
not increment."
::= { mplsLspInfoEntry 28 }
mplsLspInfoAggrPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that have been forwarded over
current LSP. This is an aggregate count of packets
forwarded over all LSP instances from the time
LSP was up. The number reported is not realtime, may
be subject to several minutes delay. The delay is
controllable by mpls statistics gathering interval,
which by default is once every 5 minutes. If mpls
statistics gathering is not enabled, this number will
not increment."
::= { mplsLspInfoEntry 29 }
mplsPathInfoRecordRouteWithLabels OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <flag/label> <space>
repeated for each address.
This field is meaningless unless mplsPathInfoName is
not empty"
::= { mplsLspInfoEntry 30 }
--
-- definition of MPLS traps
--
mplsTraps OBJECT IDENTIFIER ::= { mpls 4 }
mplsLspUp NOTIFICATION-TYPE
OBJECTS { mplsLspName,
mplsPathName } -- LspPath
STATUS deprecated
DESCRIPTION
"An mplsLspUp trap signifies that the
specified LSP is up. The current active
path for the LSP is mplsPathName."
::= { mplsTraps 1 }
mplsLspDown NOTIFICATION-TYPE
OBJECTS { mplsLspName,
mplsPathName } -- LspPath
STATUS deprecated
DESCRIPTION
"An mplsLspDown trap signifies that the
specified LSP is down, because the current
active path mplsPathName went down."
::= { mplsTraps 2 }
mplsLspChange NOTIFICATION-TYPE
OBJECTS { mplsLspName,
mplsPathName } -- toLspPath
STATUS deprecated
DESCRIPTION
"An mplsLspChange trap signifies that the
the specified LSP has switched traffic to
the new active path 'toLspPath'. The LSP maintains
up state before and after the switch over"
::= { mplsTraps 3 }
mplsLspPathDown NOTIFICATION-TYPE
OBJECTS { mplsLspName,
mplsPathName } -- LspPath
STATUS deprecated
DESCRIPTION
"An mplsLspPathDown trap signifies that the
specified path mplsPathName for the specified
LSP mplsLspName went down"
::= { mplsTraps 4 }
mplsLspPathUp NOTIFICATION-TYPE
OBJECTS { mplsLspName,
mplsPathName } -- LspPath
STATUS deprecated
DESCRIPTION
"An mplsLspPathUp trap signifies that the
specified path mplsPathName for the specified
LSP mplsLspName came up"
::= { mplsTraps 5 }
--
-- definition of MPLS traps based on mplsLspInfoName
--
mplsLspTraps OBJECT IDENTIFIER ::= { mpls 0 }
mplsLspInfoUp NOTIFICATION-TYPE
OBJECTS { mplsLspInfoName,
mplsPathInfoName } -- LspPath
STATUS current
DESCRIPTION
"An mplsLspInfoUp trap signifies that the
specified LSP is up. The current active
path for the LSP is mplsPathInfoName."
::= { mplsLspTraps 1 }
mplsLspInfoDown NOTIFICATION-TYPE
OBJECTS { mplsLspInfoName,
mplsPathInfoName } -- LspPath
STATUS current
DESCRIPTION
"An mplsLspInfoDown trap signifies that the
specified LSP is down, because the current
active path mplsPathInfoName went down."
::= { mplsLspTraps 2 }
mplsLspInfoChange NOTIFICATION-TYPE
OBJECTS { mplsLspInfoName,
mplsPathInfoName } -- toLspPath
STATUS current
DESCRIPTION
"An mplsLspInfoChange trap signifies that the
the specified LSP has switched traffic to
the new active path 'toLspPath'. The LSP maintains
up state before and after the switch over"
::= { mplsLspTraps 3 }
mplsLspInfoPathDown NOTIFICATION-TYPE
OBJECTS { mplsLspInfoName,
mplsPathInfoName } -- LspPath
STATUS current
DESCRIPTION
"An mplsLspInfoPathDown trap signifies that the
specified path mplsPathName for the specified
LSP mplsLspInfoName went down"
::= { mplsLspTraps 4 }
mplsLspInfoPathUp NOTIFICATION-TYPE
OBJECTS { mplsLspInfoName,
mplsPathInfoName } -- LspPath
STATUS current
DESCRIPTION
"An mplsLspInfoPathUp trap signifies that the
specified path mplsPathName for the specified
LSP mplsLspInfoName came up"
::= { mplsLspTraps 5 }
END
Reference in New Issue Copy Permalink