mibs/MIBS/junose/Juniper-IP-PROFILE-MIB

674 lines
24 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-IP-PROFILE-MIB
--
-- Juniper Networks Enterprise MIB
-- IP Profile MIB
--
-- Copyright (c) 1999 Redstone Communications, Inc.
-- Copyright (c) 2000, 2001 Unisphere Networks, Inc.
-- Copyright (c) 2002 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-IP-PROFILE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
DisplayString, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
juniMibs
FROM Juniper-MIBs
JuniEnable, JuniName, JuniSetMap
FROM Juniper-TC;
juniIpProfileMIB MODULE-IDENTITY
LAST-UPDATED "200609081026Z" -- 08-Sep-06 03:56 PM EST
ORGANIZATION "Juniper Networks"
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"
DESCRIPTION
"The IP Profile MIB for the Juniper Networks enterprise."
-- Revision History
REVISION "200609081026Z" -- 08-Sep-06 03:56 PM EST - JUNOSe 8.1
DESCRIPTION
"Added support for Blocking multicast sources on IP Interfaces -
juniIpProfileBlockMulticastSources."
REVISION "200509131721Z" -- 13-Sep-05 01:21 PM EDT - JUNOSe 7.2
DESCRIPTION
"Added support for Flow Stats a.k.a. J-Flow for IP Interfaces by
including juniIpProfileFlowStats."
REVISION "200410051404Z" -- 05-Oct-04 10:04 AM EDT - JUNOSe 7.0
DESCRIPTION
"Added support for IP filter options all for IP Interfaces by
including juniIpProfileFilterOptionsAll."
REVISION "200309241533Z" -- 24-Sep-03 11:33 AM EDT - JUNOSe 5.2
DESCRIPTION
"Added support for TCP MSS configuration for IP interfaces by
including juniIpProfileTcpMss."
REVISION "200210111320Z" -- 11-Oct-02 09:20 AM EDT - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names.
In juniIpProfileTable, to support unnumbered interfaces referencing
numbered interfaces in addition to loopback interfaces, the
following object is made obsolete:
juniIpProfileLoopback
and the following object is added:
juniIpProfileInheritNumString"
REVISION "200101242006Z" -- 24-Jan-01 03:06 PM EST - JUNOSe 3.0
DESCRIPTION
"Deprecated juniIpProfileRowStatus; the table is now dense and populated
as a side-effect of creation of an entry in the juniProfileNameTable in
Juniper-PROFILE-MIB. Also, added juniIpProfileSetMap and
juniIpProfileSrcAddrValidEnable."
REVISION "200005080000Z" -- 8-May-00 - JUNOSe 2.0
DESCRIPTION
"Obsoleted juniIpProfileLoopbackIfIndex, replacing it with
juniIpProfileLoopback."
REVISION "9908250000Z" -- 25-Aug-99 - JUNOSe 1.1
DESCRIPTION
"Initial version of this MIB module."
::= { juniMibs 26 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed object groups
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIpProfileObjects OBJECT IDENTIFIER ::= {juniIpProfileMIB 1}
juniIpProfile OBJECT IDENTIFIER ::= {juniIpProfileObjects 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects for IP Profiles
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- This MIB defines configuration profile structure for IP interfaces.
-- The creation/deletion of profiles and mapping of profile names to profile
-- indices is coordinated in the Juniper-PROFILE-MIB.
--
--
-- The IP Profile Table
--
juniIpProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table describe profiles for configuring IP
interfaces.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."
::= { juniIpProfile 1 }
juniIpProfileEntry OBJECT-TYPE
SYNTAX JuniIpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A profile describing configuration of an IP interface."
INDEX { juniIpProfileId }
::= { juniIpProfileTable 1 }
JuniIpProfileEntry ::= SEQUENCE {
juniIpProfileId Unsigned32,
juniIpProfileRowStatus RowStatus,
juniIpProfileRouterName JuniName,
juniIpProfileIpAddr IpAddress,
juniIpProfileIpMask IpAddress,
juniIpProfileDirectedBcastEnable JuniEnable,
juniIpProfileIcmpRedirectEnable JuniEnable,
juniIpProfileAccessRoute JuniEnable,
juniIpProfileMtu Integer32,
juniIpProfileLoopbackIfIndex InterfaceIndexOrZero,
juniIpProfileLoopback Integer32,
juniIpProfileSetMap JuniSetMap,
juniIpProfileSrcAddrValidEnable JuniEnable,
juniIpProfileInheritNumString DisplayString,
juniIpProfileTcpMss Integer32,
juniIpProfileFilterOptionsAll JuniEnable,
juniIpProfileFlowStats JuniEnable,
juniIpProfileBlockMulticastSources JuniEnable }
juniIpProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."
::= { juniIpProfileEntry 1 }
juniIpProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
The value of juniIpProfileId must match that of a profile name
configured in juniProfileNameTable."
::= { juniIpProfileEntry 2 }
juniIpProfileRouterName OBJECT-TYPE
SYNTAX JuniName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The virtual router to which an IP interface configured by this profile
will be assigned, if other mechanisms do not otherwise specify a virtual
router assignment."
DEFVAL { "" }
::= { juniIpProfileEntry 3 }
juniIpProfileIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An IP address to be used by an IP interface configured by this profile.
This object will have a value of 0.0.0.0 for an unnumbered interface."
DEFVAL { 0 }
::= { juniIpProfileEntry 4 }
juniIpProfileIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An IP address mask to be used by an IP interface configured by this
profile. This object will have a value of 0.0.0.0 for an unnumbered
interface."
DEFVAL { 0 }
::= { juniIpProfileEntry 5 }
juniIpProfileDirectedBcastEnable OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable forwarding of directed broadcasts on this IP network
interface."
DEFVAL { disable }
::= { juniIpProfileEntry 6 }
juniIpProfileIcmpRedirectEnable OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable transmission of ICMP Redirect messages on this IP
network interface."
DEFVAL { disable }
::= { juniIpProfileEntry 7 }
juniIpProfileAccessRoute OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable whether a host route is automatically created for a
remote host attached to an IP interface that is configured using this
profile."
DEFVAL { enable }
::= { juniIpProfileEntry 8 }
juniIpProfileMtu OBJECT-TYPE
SYNTAX Integer32 (0|512..10240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured MTU size for this IP network interface. If set to zero,
the default MTU size, as determined by the underlying network media, is
used."
DEFVAL { 0 }
::= { juniIpProfileEntry 9 }
juniIpProfileLoopbackIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"For unnumbered interfaces, the IfIndex of the IP loopback interface
whose IP address is used as the source address for transmitted IP
packets. A value of zero means the loopback interface is unspecified
(e.g., when the interface is numbered)."
DEFVAL { 0 }
::= { juniIpProfileEntry 10 }
juniIpProfileLoopback OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when
transmitting IP packets on unnumbered remote access user links.
For example, if the loopback interface for the associated router was
configured via the console as 'loopback 2', this object would contain
the integer value 2.
A value of -1 indicates the loopback interface is unspecified, e.g.,
when the IP interface is numbered.
This object has been replaced by juniIpProfileInheritNumString.
This object is no longer represented in the juniIpProfileSetMap."
DEFVAL { -1 }
::= { juniIpProfileEntry 11 }
juniIpProfileSetMap OBJECT-TYPE
SYNTAX JuniSetMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring
JuniSetMap."
::= { juniIpProfileEntry 12 }
juniIpProfileSrcAddrValidEnable OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable whether source addresses in received IP packets are
validated. Validation is performed by looking up the source IP address
in the routing database and determining whether the packet arrived on
the expected interface; if not, the packet is discarded."
DEFVAL { disable }
::= { juniIpProfileEntry 13 }
juniIpProfileInheritNumString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The text identifier of the numbered interface, associated with the
specified virtual router, whose IP address is used as the source address
when transmitting IP packets on unnumbered remote access user links.
Types/formats/examples for this string include:
Loopback
loopback <id>
'loopback 0'
ATM Virtual Circuit
atm <slot>/<port>.<distinguisher>
'atm 3/1.100'
Ethernet
{ fastEthernet | gigabitEthernet } <slot>/<port>
'fastEthernet 3/0'
'gigabitEthernet 3/0'
Ethernet VLAN
{ fastEthernet | gigabitEthernet } <slot>/<port>:<vlanID>
'fastEthernet 3/0:1000'
'gigabitEthernet 3/0:1000'
Channelized Serial
serial <slot>/<port>:<channelSpecifier>[/<channelSpecifier>]*
'serial 3/0:4' (T1/E1)
'serial 3/0:2/4' (T3/E3)
'serial 3/0:2/1/1/4' (OC3/OC12 - channelized DS3)
'serial 3/0:2/1/1/1/4' (OC3/OC12 - virtual tributaries)
Other formats may be supported over time.
An empty string indicates the referenced interface is unspecified, e.g.,
when this IP interface is numbered."
DEFVAL { "" }
::= { juniIpProfileEntry 14 }
juniIpProfileTcpMss OBJECT-TYPE
SYNTAX Integer32 (0|160..10240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configures TCP MSS value for an IP interface. When configured,
MSS value of TCP SYN packets received or transmitted on the
interface will be compared with the configured value and lowest
of the two will replace the value in the packet."
DEFVAL { 0 }
::= { juniIpProfileEntry 15 }
juniIpProfileFilterOptionsAll OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable whether IP packets containing options are to be discarded or sent
to the control plane for processing."
DEFVAL { disable }
::= { juniIpProfileEntry 16 }
juniIpProfileFlowStats OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable whether J-Flow is enabled on the interface"
DEFVAL { disable }
::= { juniIpProfileEntry 17 }
juniIpProfileBlockMulticastSources OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Blocking Multicast traffic"
DEFVAL { disable }
::= { juniIpProfileEntry 18 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB. Placeholders follow.
-- juniIpProfileTrapControl OBJECT IDENTIFIER ::= { juniIpProfileMIB 2 }
-- juniIpProfileTraps OBJECT IDENTIFIER ::= { juniIpProfileMIB 3 }
-- juniIpProfileTrapPrefix OBJECT IDENTIFIER ::= { juniIpProfileTraps 0 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIpProfileMIBConformance
OBJECT IDENTIFIER ::= { juniIpProfileMIB 4 }
juniIpProfileMIBCompliances
OBJECT IDENTIFIER ::= { juniIpProfileMIBConformance 1 }
juniIpProfileMIBGroups
OBJECT IDENTIFIER ::= { juniIpProfileMIBConformance 2 }
--
-- compliance statements
--
juniIpProfileCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting IP configuration
profiles. This statement became obsolete when juniIpProfileLoopback
replaced juniIpProfileLoopbackIfIndex."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup }
::= { juniIpProfileMIBCompliances 1 } -- JUNOSe 1.1
juniIpProfileCompliance1 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting IP configuration
profiles. This statement became obsolete when juniIpProfileRowStatus
was deprecate and the juniIpProfileSetMap and
juniIpProfileSrcAddrValidEnable objects were added."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup1 }
::= { juniIpProfileMIBCompliances 2 } -- JUNOSe 2.0
juniIpProfileCompliance2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting IP configuration
profiles. This statement became obsolete when juniIpProfileLoopback was
obsoleted and the juniIpProfileInheritNumString object was added."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup2 }
::= { juniIpProfileMIBCompliances 3 } -- JUNOSe 3.0
juniIpProfileCompliance3 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting IP configuration
profiles. This statement became obsolete when juniIpProfileTcpMss was
added."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup3 }
::= { juniIpProfileMIBCompliances 4 } -- JUNOSe 5.0
juniIpProfileCompliance4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting IP configuration
profiles. This statement became obsolete when juniIpProfileFilterOptionsAll
was added."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup4 }
::= { juniIpProfileMIBCompliances 5 } -- JUNOSe 5.2
juniIpProfileCompliance5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting IP configuration
profiles, incorporating juniIpProfileFilterOptionsAll."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup5 }
::= { juniIpProfileMIBCompliances 6 } -- JUNOSe 7.0
juniIpProfileCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting IP configuration
profiles, incorporating juniIpProfileFlowStats."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup6 }
::= { juniIpProfileMIBCompliances 7 } -- JUNOSe 7.2
juniIpProfileCompliance7 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting IP configuration
profiles, incorporating juniIpProfileBlockMulticastSources."
MODULE -- this module
MANDATORY-GROUPS {
juniIpProfileGroup7 }
::= { juniIpProfileMIBCompliances 8 } -- JUNOSe 8.1
--
-- units of conformance
--
juniIpProfileGroup OBJECT-GROUP
OBJECTS {
juniIpProfileRowStatus,
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileLoopbackIfIndex }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This group became obsolete when
juniIpProfileLoopback replaced juniIpProfileLoopbackIfIndex."
::= { juniIpProfileMIBGroups 1 }
juniIpProfileGroup1 OBJECT-GROUP
OBJECTS {
juniIpProfileRowStatus,
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileLoopback }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This group became obsolete when
juniIpProfileRowStatus was deprecate and the juniIpProfileSetMap and
juniIpProfileSrcAddrValidEnable objects were added."
::= { juniIpProfileMIBGroups 2 }
juniIpProfileGroup2 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileLoopback,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This statement became obsolete
when juniIpProfileLoopback was obsoleted and the
juniIpProfileInheritNumString object was added."
::= { juniIpProfileMIBGroups 3 }
juniIpProfileDeprecatedGroup OBJECT-GROUP
OBJECTS {
juniIpProfileRowStatus }
STATUS deprecated
DESCRIPTION
"Deprecated object providing management of IP Profile functionality in a
Juniper product. This group has been deprecated but may still be
supported on some implementations."
::= { juniIpProfileMIBGroups 4 }
juniIpProfileGroup3 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable,
juniIpProfileInheritNumString }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This statement became obsolete
when juniIpProfileTcpMss was added."
::= { juniIpProfileMIBGroups 5 }
juniIpProfileGroup4 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable,
juniIpProfileInheritNumString,
juniIpProfileTcpMss }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This statement became osolete
when juniIpProfileFilterOptionsAll was added."
::= { juniIpProfileMIBGroups 6 }
juniIpProfileGroup5 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable,
juniIpProfileInheritNumString,
juniIpProfileTcpMss,
juniIpProfileFilterOptionsAll }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This statement became osolete
when juniIpProfileFlowStats was added."
::= { juniIpProfileMIBGroups 7 }
juniIpProfileGroup6 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable,
juniIpProfileInheritNumString,
juniIpProfileTcpMss,
juniIpProfileFilterOptionsAll,
juniIpProfileFlowStats }
STATUS obsolete
DESCRIPTION
"An obsolete collection of objects providing management of IP Profile
functionality in a Juniper product. This statement became obsolete
when juniIpProfileBlockMulticastSources was added."
::= { juniIpProfileMIBGroups 8 }
juniIpProfileGroup7 OBJECT-GROUP
OBJECTS {
juniIpProfileRouterName,
juniIpProfileIpAddr,
juniIpProfileIpMask,
juniIpProfileDirectedBcastEnable,
juniIpProfileIcmpRedirectEnable,
juniIpProfileAccessRoute,
juniIpProfileMtu,
juniIpProfileSetMap,
juniIpProfileSrcAddrValidEnable,
juniIpProfileInheritNumString,
juniIpProfileTcpMss,
juniIpProfileFilterOptionsAll,
juniIpProfileFlowStats,
juniIpProfileBlockMulticastSources }
STATUS current
DESCRIPTION
"The basic collection of objects providing management of IP Profile
functionality in a Juniper product."
::= { juniIpProfileMIBGroups 9 }
END