david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junose/Juniper-PPPOE-MIB

2005 lines
70 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-PPPOE-MIB
--
-- Juniper Networks Enterprise MIB
-- Point-to-Point Protocol over Ethernet (PPPoE) MIB
--
-- Copyright (c) 1999 Redstone Communications, Inc.
-- Copyright (c) 2000, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002-2005 Juniper Networks, Inc.
-- Copyright (c) 2008 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-PPPOE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
juniMibs
FROM Juniper-MIBs
JuniNextIfIndex, JuniEnable
FROM Juniper-TC;
juniPPPoEMIB MODULE-IDENTITY
LAST-UPDATED "200811271023Z" -- 27-Nov-08 03:53 PM EST
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"
DESCRIPTION
"The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper
E-series product family. This MIB contains managed objects for each of
two interface layers: PPPoE interfaces, and PPPoE subinterfaces. For
each of these layers, management objects are provided to query for an
available interface index, and to create/delete interfaces of that type.
Creating/deleting these interface types using this MIB has the side
effect of creating/deleting corresponding entries in the IF-MIB
ifTable/ifXTable, and in the Juniper-UNI-IF-MIB.juniIfTable."
-- Revision History
REVISION "200811271023Z" -- 27-Nov-08 03:53 PM EST - JUNOSe 10.1
DESCRIPTION
"Added juniPPPoEServiceNameTableUnknownAction object."
REVISION "200806180942Z" -- 18-Jun-08 03:12 PM EST - JUNOSe 9.3
DESCRIPTION
"Added juniPPPoEMaxSessionVsa object."
REVISION "200508032058Z" -- 03-Aug-05 04:58 PM EDT - JUNOSe 7.2
DESCRIPTION
"Added Interface Lockout configuration and state support."
REVISION "200505181201Z" -- 18-May-05 12:01 PM EDT - JUNOSe 7.0.1
DESCRIPTION
"Added MTU control object."
REVISION "200406092058Z" -- 10-Mar-03 04:58 PM EDT - JUNOSe 7.0
DESCRIPTION
"Added PADR Remote Circuit Id Capture support."
REVISION "200303101830Z" -- 10-Mar-03 01:30 PM EST - JUNOSe 5.1
DESCRIPTION
"Added separate PADI and PADR invalid session counters and obsoleted
existing combined invalid session counter.
Added invalid length and invalid tag length counters.
Added ServiceName table support."
REVISION "200210022012Z" -- 02-Oct-02 04:12 PM EDT - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names."
REVISION "200210011827Z" -- 01-Oct-02 02:27 PM EDT - JUNOSe 4.1
DESCRIPTION
"Added PADN counter."
REVISION "200208162146Z" -- 16-Aug-02 05:46 PM EDT - JUNOSe 4.0
DESCRIPTION
"Added PADI flag support."
REVISION "200106191427Z" -- 14-May-02 06:38 PM EST - JUNOSe 3.2
DESCRIPTION
"Added AC-NAME and duplicate MAC address indicator objects."
REVISION "200103211500Z" -- 21-Mar-01 10:00 AM EST - JUNOSe 3.0
DESCRIPTION
"Deprecated profile support, which is now in a separate module.
Made corrections to MOTM and URL ranges (should allow zero length) and
to read-write objects that should be read-create because they are in
tables that permit row creation.
Fixed upper bound of juniPPPoEIfMaxNumSessions.
Fixed conformance definitions."
REVISION "200102120000Z" -- 12-Feb-01 - JUNOSe 2.6
DESCRIPTION
"Added interface summary statistics under juniPPPoESummary node."
REVISION "200010250000Z" -- 25-Oct-00 - JUNOSe 2.0
DESCRIPTION
"Added profile support and new sub-interface objects."
REVISION "9905130000Z" -- 13-May-99 - JUNOSe 1.1
DESCRIPTION
"Initial version of this MIB module."
::= { juniMibs 18 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JuniPPPoEServiceNameAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The set of Service-name action types.
drop no PADO packet will be sent.
terminate a PADO packet will be sent."
SYNTAX INTEGER {
drop(0),
terminate(1) }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPPPoEObjects OBJECT IDENTIFIER ::= { juniPPPoEMIB 1 }
juniPPPoEIfLayer OBJECT IDENTIFIER ::= { juniPPPoEObjects 1 }
juniPPPoESubIfLayer OBJECT IDENTIFIER ::= { juniPPPoEObjects 2 }
juniPPPoEGlobal OBJECT IDENTIFIER ::= { juniPPPoEObjects 3 }
juniPPPoEProfile OBJECT IDENTIFIER ::= { juniPPPoEObjects 4 }
juniPPPoESummary OBJECT IDENTIFIER ::= { juniPPPoEObjects 5 }
juniPPPoEServices OBJECT IDENTIFIER ::= { juniPPPoEObjects 6 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPPoE Interface Layer
--
-- This layer is managed with the following elements:
-- o NextIfIndex (generator for PPPoE IfIndex selection)
-- o Interface Table (creation/configuration/deletion of PPPoE interfaces)
-- o Statistics Table (PPPoE interface statistics)
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- IfIndex selection for creating new PPPoE interfaces
--
juniPPPoENextIfIndex OBJECT-TYPE
SYNTAX JuniNextIfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Coordinate ifIndex value allocation for entries in juniPPPoEIfTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously."
::= { juniPPPoEIfLayer 1 }
--
-- The PPPoE Interface Table
--
juniPPPoEIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters for the PPPoE service on this interface."
REFERENCE
"RFC 2156 A method for transmitting PPP over Ethernet"
::= { juniPPPoEIfLayer 2 }
juniPPPoEIfEntry OBJECT-TYPE
SYNTAX JuniPPPoEIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Parameters for a particular PPPoE interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable, and
juniPPPoEIfStatsTable."
INDEX { juniPPPoEIfIfIndex }
::= { juniPPPoEIfTable 1 }
JuniPPPoEIfEntry ::= SEQUENCE {
juniPPPoEIfIfIndex InterfaceIndex,
juniPPPoEIfMaxNumSessions INTEGER,
juniPPPoEIfRowStatus RowStatus,
juniPPPoEIfLowerIfIndex InterfaceIndexOrZero,
juniPPPoEIfAcName DisplayString,
juniPPPoEIfDupProtect JuniEnable,
juniPPPoEIfPADIFlag JuniEnable,
juniPPPoEIfAutoconfig JuniEnable,
juniPPPoEIfServiceNameTable Unsigned32,
juniPPPoEIfPadrRemoteCircuitIdCapture JuniEnable,
juniPPPoEIfMtu Integer32,
juniPPPoEIfLockoutMin Integer32,
juniPPPoEIfLockoutMax Integer32,
juniPPPoEMaxSessionVsa INTEGER }
juniPPPoEIfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the corresponding ifEntry."
::= { juniPPPoEIfEntry 1 }
juniPPPoEIfMaxNumSessions OBJECT-TYPE
SYNTAX INTEGER (0..65335)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of sessions allowed on the PPPoE interface, zero indicates
unlimited."
DEFVAL { 0 }
::= { juniPPPoEIfEntry 2 }
juniPPPoEIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniPPPoEIfRowStatus
juniPPPoEIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for juniPPPoEIfIndex must have been determined previously,
by reading juniPPPoENextIfIndex.
The interface identified by juniPPPoEIfLowerIfIndex must exist, and
must be an interface type that permits layering of PPPoE above it.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating or destroying an entry in this table."
::= { juniPPPoEIfEntry 3 }
juniPPPoEIfLowerIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of an interface over which this PPPoE interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation."
::= { juniPPPoEIfEntry 4 }
juniPPPoEIfAcName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface."
::= { juniPPPoEIfEntry 5 }
juniPPPoEIfDupProtect OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flag to allow duplicate MAC addresses."
DEFVAL { disable }
::= { juniPPPoEIfEntry 6 }
juniPPPoEIfPADIFlag OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This flag controls whether we always respond to a PADI with a PADO
regardless of the ability to create the session and allows the session
establish phase to resolve it."
DEFVAL { disable }
::= { juniPPPoEIfEntry 7 }
juniPPPoEIfAutoconfig OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This flags determines whether the upper PPPoE interface is created
dynamically or statically. When enable(1) the interface is created
dynamically."
DEFVAL { disable }
::= { juniPPPoEIfEntry 8 }
juniPPPoEIfServiceNameTable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Associate a PPPoE Service Name Table with this interface for PADI
processing."
::= { juniPPPoEIfEntry 9 }
juniPPPoEIfPadrRemoteCircuitIdCapture OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This flags determines whether the remote circuit id string will
be captured and subsequently used as the NAS-PORT-ID radius
attribute when it arrives as a tag in the PADR packet."
DEFVAL { disable }
::= { juniPPPoEIfEntry 10 }
juniPPPoEIfMtu OBJECT-TYPE
SYNTAX Integer32 (1|2|66..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.
If the value of this variable is 1 then the local PPPoE entity will
use an MTU value determined by its underlying media interface.
If the value of this variable is 2 then the local PPPoE entity will
use a value determined by the PPPoE Max-Mtu-Tag transmitted from the
client in the PADR packet. If no Max-Mtu-Tag is received, the value
defaults to a maximum of 1494.
The operational MTU is limited by the MTU of the underlying media
interface minus the PPPoE frame overhead."
DEFVAL { 1494 }
::= { juniPPPoEIfEntry 11 }
juniPPPoEIfLockoutMin OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client in the event of an error in
creating a PPP interface is enabled by default. The initial lockout
duration is this object's value and increases exponentially for
each failure that occurs for the client creating a PPP interface
for the PPPoE interface within the greater of 15 minutes
and juniPPPoEIfLockoutMax.
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to this
object's value.
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for
debugging purposes or when this interface supports more than one session."
DEFVAL { 0 }
::= { juniPPPoEIfEntry 12 }
juniPPPoEIfLockoutMax OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client from recognition in the event
of an error in creating a PPP interface is enabled by default.
The initial lockout duration is juniPPPoEIfLockoutMin and
increases exponentially for each failure that occurs for the client
interface within the greater of 15 minutes and this object's value.
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to
juniPPPoEIfLockoutMin.
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for
debugging purposes or when this interface supports more than one session."
DEFVAL { 0 }
::= { juniPPPoEIfEntry 13 }
juniPPPoEMaxSessionVsa OBJECT-TYPE
SYNTAX INTEGER {
override(1),
ignore(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the value
returned by RADIUS server.
Ignore Ignore the max-session value returned by RADIUS server"
DEFVAL { ignore }
::= { juniPPPoEIfEntry 14 }
--
-- The PPPoE Interface Statistics Table
--
juniPPPoEIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics for the PPP over Ethernet Interface for the PPPoE
service on this interface."
::= { juniPPPoEIfLayer 3 }
juniPPPoEIfStatsEntry OBJECT-TYPE
SYNTAX JuniPPPoEIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics for a particular PPPoE Interface."
INDEX { juniPPPoEIfIfIndex }
::= { juniPPPoEIfStatsTable 1 }
JuniPPPoEIfStatsEntry ::= SEQUENCE {
juniPPPoEIfStatsRxPADI Counter32,
juniPPPoEIfStatsTxPADO Counter32,
juniPPPoEIfStatsRxPADR Counter32,
juniPPPoEIfStatsTxPADS Counter32,
juniPPPoEIfStatsRxPADT Counter32,
juniPPPoEIfStatsTxPADT Counter32,
juniPPPoEIfStatsRxInvVersion Counter32,
juniPPPoEIfStatsRxInvCode Counter32,
juniPPPoEIfStatsRxInvTags Counter32,
juniPPPoEIfStatsRxInvSession Counter32,
juniPPPoEIfStatsRxInvTypes Counter32,
juniPPPoEIfStatsRxInvPackets Counter32,
juniPPPoEIfStatsRxInsufficientResources Counter32,
juniPPPoEIfStatsTxPADM Counter32,
juniPPPoEIfStatsTxPADN Counter32,
juniPPPoEIfStatsRxInvTagLength Counter32,
juniPPPoEIfStatsRxInvLength Counter32,
juniPPPoEIfStatsRxInvPadISession Counter32,
juniPPPoEIfStatsRxInvPadRSession Counter32 }
juniPPPoEIfStatsRxPADI OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADI packets received."
::= { juniPPPoEIfStatsEntry 1 }
juniPPPoEIfStatsTxPADO OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADO packets transmitted."
::= { juniPPPoEIfStatsEntry 2 }
juniPPPoEIfStatsRxPADR OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADR packets received."
::= { juniPPPoEIfStatsEntry 3 }
juniPPPoEIfStatsTxPADS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADS packets transmitted."
::= { juniPPPoEIfStatsEntry 4 }
juniPPPoEIfStatsRxPADT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADT packets received."
::= { juniPPPoEIfStatsEntry 5 }
juniPPPoEIfStatsTxPADT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADT packets transmitted."
::= { juniPPPoEIfStatsEntry 6 }
juniPPPoEIfStatsRxInvVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid version."
::= { juniPPPoEIfStatsEntry 7 }
juniPPPoEIfStatsRxInvCode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid code."
::= { juniPPPoEIfStatsEntry 8 }
juniPPPoEIfStatsRxInvTags OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid tags."
::= { juniPPPoEIfStatsEntry 9 }
juniPPPoEIfStatsRxInvSession OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number of packets received with invalid session identifiers.
This object became obsolete when separate counters were added for PADI
and PADR packets."
::= { juniPPPoEIfStatsEntry 10 }
juniPPPoEIfStatsRxInvTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid types."
::= { juniPPPoEIfStatsEntry 11 }
juniPPPoEIfStatsRxInvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of invalid packets received."
::= { juniPPPoEIfStatsEntry 12 }
juniPPPoEIfStatsRxInsufficientResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of session requests that could not be honored due to invalid
resources."
::= { juniPPPoEIfStatsEntry 13 }
juniPPPoEIfStatsTxPADM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADM packets transmitted."
::= { juniPPPoEIfStatsEntry 14 }
juniPPPoEIfStatsTxPADN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADN packets transmitted."
::= { juniPPPoEIfStatsEntry 15 }
juniPPPoEIfStatsRxInvTagLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid tag length."
::= { juniPPPoEIfStatsEntry 16 }
juniPPPoEIfStatsRxInvLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with invalid length."
::= { juniPPPoEIfStatsEntry 17 }
juniPPPoEIfStatsRxInvPadISession OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADI packets received with invalid session identifiers."
::= { juniPPPoEIfStatsEntry 18 }
juniPPPoEIfStatsRxInvPadRSession OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADR packets received with invalid session identifiers."
::= { juniPPPoEIfStatsEntry 19 }
--
-- The PPPoE Interface Client Lockout Table
--
juniPPPoEIfLockoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEIfLockoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lockout configuration and state of a PPPoE client on this interface."
::= { juniPPPoEIfLayer 4 }
juniPPPoEIfLockoutEntry OBJECT-TYPE
SYNTAX JuniPPPoEIfLockoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the configuration and state of a particular
PPPoE interface client lockout."
INDEX { juniPPPoEIfIfIndex, juniPPPoEIfLockoutClientAddress }
::= { juniPPPoEIfLockoutTable 1 }
JuniPPPoEIfLockoutEntry ::= SEQUENCE {
juniPPPoEIfLockoutClientAddress MacAddress,
juniPPPoEIfLockoutTime Integer32,
juniPPPoEIfLockoutElapsedTime Integer32,
juniPPPoEIfLockoutNextTime Integer32 }
juniPPPoEIfLockoutClientAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source MAC address if the client."
::= { juniPPPoEIfLockoutEntry 1 }
juniPPPoEIfLockoutTime OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time duration, in seconds, currently used to lockout the
specified encapsulation type from recognition for the specified
interface. The reported value is within the range specified by
juniPPPoEIfLockoutMin and juniPPPoEIfLockoutMax. A value of 0
indicates that no lockout is occurring for the encapsulation type
for the specified interface."
::= { juniPPPoEIfLockoutEntry 2 }
juniPPPoEIfLockoutElapsedTime OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time, in seconds, that the specified encapsulation type
has been locked-out from recognition for the specified interface.
Its value will not exceed that of juniPPPoEIfLockoutTime. A value of
0 indicates that no lockout is occurring for the encapsulation type
for the specified interface."
::= { juniPPPoEIfLockoutEntry 3 }
juniPPPoEIfLockoutNextTime OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time duration, in seconds, that will be used to lockout the
specified encapsulation type from recognition for the specified
interface for the next event that results in a lockout condition.
The reported value is within the range specified by
juniPPPoEIfLockoutMin and juniPPPoEIfLockoutMax. When
juniPPPoEIfEnable is set to enable, a value of 0 indicates that
lockout is prevented from occurring for the encapsulation type
for the specified interface (i.e., juniPPPoEIfLockoutMin and
juniPPPoEIfLockoutMax are both set to 0)."
::= { juniPPPoEIfLockoutEntry 4 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPPoE Subinterface Layer
--
-- This layer is managed with the following elements:
-- o NextIfIndex (generator for PPPoE subinterface IfIndex selection)
-- o SubIf Table (creation/configuration/deletion of PPPoE subinterfaces)
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- IfIndex selection for creating new PPPoE Subinterfaces
--
juniPPPoESubIfNextIfIndex OBJECT-TYPE
SYNTAX JuniNextIfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Coordinate ifIndex value allocation for entries in juniPPPoESubIfTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously."
::= { juniPPPoESubIfLayer 1 }
--
-- The PPPoE Subinterface Table
--
juniPPPoESubIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoESubIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for PPPoE Subinterfaces present in the
system."
::= { juniPPPoESubIfLayer 2 }
juniPPPoESubIfEntry OBJECT-TYPE
SYNTAX JuniPPPoESubIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry describes the characteristics of a PPPoE Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created /deleted in ifTable/ifXTable/juniIfTable."
INDEX { juniPPPoESubIfIndex }
::= { juniPPPoESubIfTable 1 }
JuniPPPoESubIfEntry ::= SEQUENCE {
juniPPPoESubIfIndex InterfaceIndex,
juniPPPoESubIfRowStatus RowStatus,
juniPPPoESubIfLowerIfIndex InterfaceIndexOrZero,
juniPPPoESubIfId Integer32,
juniPPPoESubIfSessionId Integer32,
juniPPPoESubIfMotm DisplayString,
juniPPPoESubIfUrl DisplayString }
juniPPPoESubIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the PPPoE Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniPPPoESubNextIfIndex."
::= { juniPPPoESubIfEntry 1 }
juniPPPoESubIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniPPPoESubIfRowStatus
juniPPPoESubIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for juniPPPoESubIfIndex must have been determined
previously, by reading juniPPPoESubIfNextIfIndex.
The interface identified by juniPPPoESubIfLowerIfIndex must exist,
and must be a PPPoE interface.
A positive value configured for juniPPPoESubIfId must not already be
assigned to another subinterface layered onto the same underlying
PPPoE interface.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating or destroying an entry in this table."
::= { juniPPPoESubIfEntry 2 }
juniPPPoESubIfLowerIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of a PPPoE interface over which this PPPoE Subinterface is
to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creation."
::= { juniPPPoESubIfEntry 3 }
juniPPPoESubIfId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer identifier for the PPPoE subinterface, used in conjunction
with the command-line interface. It is provided here for
cross-reference purposes only.
The value must be unique among subinterfaces configured on the same
underlying PPPoE interface.
If this object is not configured, or is configured with a value of -1, a
nonzero value will be allocated internally and can be retrieved from
this object after table entry creation has succeeded.
A value of zero for this object is reserved for future use."
DEFVAL { -1 }
::= { juniPPPoESubIfEntry 4 }
juniPPPoESubIfSessionId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current sessionId associated with this sub-interface."
::= { juniPPPoESubIfEntry 5 }
juniPPPoESubIfMotm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A message to send via a PADM on the sub-interface when the
sub-interface transitions to the ifOperStatusUp state. The client may
choose to display this message to the user."
::= { juniPPPoESubIfEntry 6 }
juniPPPoESubIfUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A URL to be sent via a PADM on the sub-interface when the sub-interface
transitions to the ifOperStatusUp state. The client may use this URL as
the initial web-page for the user."
::= { juniPPPoESubIfEntry 7 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPPoE Globals
--
-- The globals are non interface based objects
--
-- /////////////////////////////////////////////////////////////////////////////
juniPPPoEGlobalMotm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A message to send via a PADM to all sub-interface that are currently in
ifOperStatusUp state. A client may choose to display this information
to the user. Retrieving this object always returns a null string."
::= { juniPPPoEGlobal 1 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPPoE Service-name tables
--
-- The service-name tables are non interface based objects
-- This layer is managed with the following elements:
-- o NextIfIndex (generator for PPPoE Service-name table IfIndex selection)
-- o Service-name table table (table if service-name tables)
-- o Service-name table (service-name table entries) indexed by Service-name
-- table ifIndex and service-name string value.
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- IfIndex selection for creating new PPPoE service-name tables
--
-- /////////////////////////////////////////////////////////////////////////////
juniPPPoEServiceNameTableNextIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Coordinate ifIndex value allocation for entries in
juniPPPoEServiceNameTableTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated service-name table table; or zero,
if no valid ifIndex value is available. This object also returns a
value of zero when it is the lexicographic successor of a varbind
presented in an SNMP GETNEXT or GETBULK request, for which circumstance
it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously."
::= { juniPPPoEServices 1 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- Service-name table table
--
-- /////////////////////////////////////////////////////////////////////////////
juniPPPoEServiceNameTableTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEServiceNameTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for the PPPoE Service-name tables."
::= { juniPPPoEServices 2 }
juniPPPoEServiceNameTableEntry OBJECT-TYPE
SYNTAX JuniPPPoEServiceNameTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters for the PPPoE service-name table."
INDEX { juniPPPoEServiceNameTableIndex }
::= { juniPPPoEServiceNameTableTable 1 }
JuniPPPoEServiceNameTableEntry ::= SEQUENCE {
juniPPPoEServiceNameTableIndex Unsigned32,
juniPPPoEServiceNameTableName DisplayString,
juniPPPoEServiceNameTableEmptyAction JuniPPPoEServiceNameAction,
juniPPPoEServiceNameTableRowStatus RowStatus,
juniPPPoEServiceNameTableUnknownAction JuniPPPoEServiceNameAction}
juniPPPoEServiceNameTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the Service-name Table Entry."
::= { juniPPPoEServiceNameTableEntry 1 }
juniPPPoEServiceNameTableName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Service-name table name."
::= { juniPPPoEServiceNameTableEntry 2 }
juniPPPoEServiceNameTableEmptyAction OBJECT-TYPE
SYNTAX JuniPPPoEServiceNameAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the behavior when the empty (zero length) Service-name tag
is received in a PADI frame."
::= { juniPPPoEServiceNameTableEntry 3 }
juniPPPoEServiceNameTableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniPPPoEServiceNameTableRowStatus
juniPPPoEServiceNameTableName
Optionally,
juniPPPoEServiceNameTableEmptyAction (default is terminate) or
juniPPPoEServiceNameTableUnknownAction (default is drop) may be
specified .
In addition, when creating an entry the following conditions must hold:
A value for juniPPPoEServiceNameTableIndex must have been determined
previously, by reading juniPPPoEServiceNameTableNextIndex.
A corresponding entry in juniServiceNameTable is created or destroyed
as a result of creating or destroying an entry in this table."
::= { juniPPPoEServiceNameTableEntry 4 }
juniPPPoEServiceNameTableUnknownAction OBJECT-TYPE
SYNTAX JuniPPPoEServiceNameAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the behavior when the unknown (unconfigured) Service-name tag
is received in a PADI frame."
::= { juniPPPoEServiceNameTableEntry 5 }
juniPPPoEServiceNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEServiceNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for the PPPoE Service-names."
::= { juniPPPoEServices 3 }
juniPPPoEServiceNameEntry OBJECT-TYPE
SYNTAX JuniPPPoEServiceNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The parameters for the PPPoE service-name table entry."
INDEX { juniPPPoEServiceNameTableIndex,
juniPPPoEServiceName }
::= { juniPPPoEServiceNameTable 1 }
JuniPPPoEServiceNameEntry ::= SEQUENCE {
juniPPPoEServiceName DisplayString,
juniPPPoEServiceNameAction JuniPPPoEServiceNameAction,
juniPPPoEServiceNameRowStatus RowStatus }
juniPPPoEServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Service-name tag value."
::= { juniPPPoEServiceNameEntry 1 }
juniPPPoEServiceNameAction OBJECT-TYPE
SYNTAX JuniPPPoEServiceNameAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the behavior when the Service-name tag is received in a
PADI/PADR frame."
::= { juniPPPoEServiceNameEntry 2 }
juniPPPoEServiceNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniPPPoEServiceNameRowStatus
The Service name is configured via the INDEX specified.
A corresponding entry in juniServiceNameTable is created or destroyed
as a result of creating or destroying an entry in this table."
::= { juniPPPoEServiceNameEntry 3 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPPoE Profile Support
--
-- This table is to support setting of the PPPoE attributes in a
-- profile entry
--
-- Profiles are created in the juniProfileNameTable. Creation in
-- that table provides an Id (unsigned32) used here for the index
-- into the PPPoE portion of that table.
--
-- /////////////////////////////////////////////////////////////////////////////
juniPPPoEProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPPPoEProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains entries for the PPPoE portion of a profile entry."
::= { juniPPPoEProfile 1 }
juniPPPoEProfileEntry OBJECT-TYPE
SYNTAX JuniPPPoEProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Each entry describes the characteristics of the PPPoE components of a
profile entry. Each entry is applied to an interface when the IP
interface above the PPPoE sub-interface becomes active."
INDEX { juniPPPoEProfileIndex }
::= { juniPPPoEProfileTable 1 }
JuniPPPoEProfileEntry ::= SEQUENCE {
juniPPPoEProfileIndex Unsigned32,
juniPPPoEProfileRowStatus RowStatus,
juniPPPoEProfileMotm DisplayString,
juniPPPoEProfileUrl DisplayString }
juniPPPoEProfileIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This is the index of the profile that the attributes are being set in.
The index must exist before creating a row in this table. The index is
equivalent to juniProfileIdId in the juniProfileIdTable."
::= { juniPPPoEProfileEntry 1 }
juniPPPoEProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
The index must exist in the profile manager before this entry can be
created. CreateAndGo simply adds a table entry to the PPPoE component.
Destroy deletes the entry in the PPPoE component (but not the entry in
other components), and removes all PPPoE information relating to this
profile."
::= { juniPPPoEProfileEntry 2 }
juniPPPoEProfileMotm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A message to send via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. A client
may choose to display this message to the user."
::= { juniPPPoEProfileEntry 3 }
juniPPPoEProfileUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A URL to be sent via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. The string
entered here can have several substitutions applied:
%D is replaced with the profile name
%d is replaced with the domain name
%u is replaced with the user name
%U is replaced with the user/domain name together
%% is replaced with the % character
The resulting string must not be greater than 127 octets long. The
client may use this URL as the initial web-page for the user."
::= { juniPPPoEProfileEntry 4 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- PPP Interface Summary Counts
--
-- /////////////////////////////////////////////////////////////////////////////
juniPPPoEMajorInterfaceCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces configured and created in
the system."
::= { juniPPPoESummary 1 }
juniPPPoESummaryMajorIfAdminUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system that are
administratively configured to up(1)."
REFERENCE
"ifAdminStatus from IF-MIB"
::= { juniPPPoESummary 2 }
juniPPPoESummaryMajorIfAdminDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system that are
administrateively configued to down(2)."
REFERENCE
"ifAdminStatus from IF-MIB"
::= { juniPPPoESummary 3 }
juniPPPoESummaryMajorIfOperUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system with an
operational state of up(1)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 4 }
juniPPPoESummaryMajorIfOperDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system with an
operational state of down(2)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 5 }
juniPPPoESummaryMajorIfLowerLayerDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system with an
operational state of lowerLayerDown(7)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 6 }
juniPPPoESummaryMajorIfNotPresent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE major interfaces in the system with an
operational state of notPresent(6)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 7 }
juniPPPoESummarySubInterfaceCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces configured in the system."
::= { juniPPPoESummary 8 }
juniPPPoESummarySubIfAdminUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system that are
administratively configured to up(1)."
REFERENCE
"ifAdminStatus from IF-MIB"
::= { juniPPPoESummary 9 }
juniPPPoESummarySubIfAdminDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system that are
administrateively configued to down(2)."
REFERENCE
"ifAdminStatus from IF-MIB"
::= { juniPPPoESummary 10 }
juniPPPoESummarySubIfOperUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system with an
operational state of up(1)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 11 }
juniPPPoESummarySubIfOperDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system with an
operational state of down(2)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 12 }
juniPPPoESummarySubIfLowerLayerDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system with an
operational state of lowerLayerDown(7)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 13 }
juniPPPoESummarySubIfNotPresent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PPPoE subinterfaces in the system with an
operational state of notPresent(6)."
REFERENCE
"ifOperStatus from IF-MIB"
::= { juniPPPoESummary 14 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB. Placeholders follow.
-- juniPPPoETrapControl OBJECT IDENTIFIER ::= { juniPPPoEMIB 2 }
-- juniPPPoETraps OBJECT IDENTIFIER ::= { juniPPPoEMIB 3 }
-- juniPPPoETrapPrefix OBJECT IDENTIFIER ::= { juniPPPoETraps 0 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPPPoEConformance OBJECT IDENTIFIER ::= { juniPPPoEMIB 4 }
juniPPPoECompliances OBJECT IDENTIFIER ::= { juniPPPoEConformance 5 }
juniPPPoEGroups OBJECT IDENTIFIER ::= { juniPPPoEConformance 4 }
--
-- compliance statements
--
juniPPPoECompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when profile support and new
sub-interface objects were added."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup,
juniPPPoESubIfGroup }
::= { juniPPPoECompliances 1 } -- JUNOSe 1.1
juniPPPoECompliance2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when interface summary
statistics objects were added."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup2,
juniPPPoESubIfGroup2,
juniPPPoEProfileGroup }
::= { juniPPPoECompliances 2 } -- JUNOSe 2.0
juniPPPoECompliance3 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when the profile objects were
deprecated."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup2,
juniPPPoESubIfGroup2,
juniPPPoEProfileGroup,
juniPPPoESummaryGroup }
::= { juniPPPoECompliances 3 } -- JUNOSe 2.6
juniPPPoECompliance4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when new objects were added."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup2,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }
::= { juniPPPoECompliances 4 } -- JUNOSe 3.0
juniPPPoECompliance5 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when PADI flag support was
added."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup3,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }
::= { juniPPPoECompliances 5 } -- JUNOSe 3.2
juniPPPoECompliance6 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when PADN counter support was
added."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup4,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }
::= { juniPPPoECompliances 6 } -- JUNOSe 4.0
juniPPPoECompliance7 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
service name table, invalid length and tag length counters, and the
invalid session counter was replaced by separate PADI and PADR invalid
session counters."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup5,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }
::= { juniPPPoECompliances 7 } -- JUNOSe 4.1
juniPPPoECompliance8 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
remote circuit id capture."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup6,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }
::= { juniPPPoECompliances 8 } -- JUNOSe 5.1
juniPPPoECompliance9 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
MTU configuration."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup7,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }
::= { juniPPPoECompliances 9 } -- JUNOSe 7.0
juniPPPoECompliance10 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
lockout configuration."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup8,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }
::= { juniPPPoECompliances 10 } -- JUNOSe 7.0.1
juniPPPoECompliance11 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
juniPPPoEMaxSessionVsa."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup9,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup,
juniPPPoELockoutTableGroup }
::= { juniPPPoECompliances 11 } -- JUNOSe 7.2
juniPPPoECompliance12 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for entities which implement the Juniper PPPoE
MIB. This statement became obsolete when support was added for
juniPPPoEServiceNameTableUnknownAction"
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup10,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup,
juniPPPoELockoutTableGroup }
::= { juniPPPoECompliances 12 } -- JUNOSe 9.3
juniPPPoECompliance13 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the Juniper PPPoE
MIB."
MODULE -- this module
MANDATORY-GROUPS {
juniPPPoEGroup10,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup1,
juniPPPoELockoutTableGroup }
::= { juniPPPoECompliances 13 } -- JUNOSe 10.1
--
-- units of conformance
--
juniPPPoEGroup OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvSession,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE interfaces
in a Juniper product. This statement became obsolete when new objects
were added."
::= { juniPPPoEGroups 1 }
juniPPPoESubIfGroup OBJECT-GROUP
OBJECTS {
juniPPPoESubIfNextIfIndex,
juniPPPoESubIfRowStatus,
juniPPPoESubIfLowerIfIndex,
juniPPPoESubIfId,
juniPPPoESubIfSessionId }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE
subinterfaces in a Juniper product. This statement became obsolete when
new sub-interface objects were added."
::= { juniPPPoEGroups 2 }
juniPPPoEProfileGroup OBJECT-GROUP
OBJECTS {
juniPPPoEProfileRowStatus,
juniPPPoEProfileUrl,
juniPPPoEProfileMotm }
STATUS deprecated
DESCRIPTION
"A collection of objects providing management of PPPoE profile entries
in a Juniper product. This group has been deprecated because the
information is now supported in the Juniper-PPPOE-PROFILE-MIB."
::= { juniPPPoEGroups 3 }
juniPPPoEGroup2 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvSession,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE interfaces
in a Juniper product. This statement became obsolete when new objects
were added."
::= { juniPPPoEGroups 4 }
juniPPPoESubIfGroup2 OBJECT-GROUP
OBJECTS {
juniPPPoESubIfNextIfIndex,
juniPPPoESubIfRowStatus,
juniPPPoESubIfLowerIfIndex,
juniPPPoESubIfId,
juniPPPoESubIfSessionId,
juniPPPoESubIfUrl,
juniPPPoESubIfMotm }
STATUS current
DESCRIPTION
"A collection of objects providing management of PPPoE subinterfaces in
a Juniper product."
::= { juniPPPoEGroups 5 }
juniPPPoESummaryGroup OBJECT-GROUP
OBJECTS {
juniPPPoEMajorInterfaceCount,
juniPPPoESummaryMajorIfAdminUp,
juniPPPoESummaryMajorIfAdminDown,
juniPPPoESummaryMajorIfOperUp,
juniPPPoESummaryMajorIfOperDown,
juniPPPoESummaryMajorIfNotPresent,
juniPPPoESummaryMajorIfLowerLayerDown,
juniPPPoESummarySubInterfaceCount,
juniPPPoESummarySubIfAdminUp,
juniPPPoESummarySubIfAdminDown,
juniPPPoESummarySubIfOperUp,
juniPPPoESummarySubIfOperDown,
juniPPPoESummarySubIfNotPresent,
juniPPPoESummarySubIfLowerLayerDown }
STATUS current
DESCRIPTION
"A collection of objects providing collection of summary statistics on
PPPoE interfaces."
::= { juniPPPoEGroups 6 }
juniPPPoEGroup3 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvSession,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE interfaces
in a Juniper product. This group became obsolete when PADI flag support
was added."
::= { juniPPPoEGroups 7 }
juniPPPoEGroup4 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvSession,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE interfaces
in a Juniper product. This group became obsolete when PADN counter
support was added."
::= { juniPPPoEGroups 8 }
juniPPPoEGroup5 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvSession,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"Obsolete collection of objects providing management of PPPoE interfaces
in a Juniper product. This group became obsolete when support was added
for invalid length and tag length counters and the invalid session
counter was replaced by separate PADI and PADR invalid session
counters."
::= { juniPPPoEGroups 9 }
juniPPPoEGroup6 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfServiceNameTable,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvTagLength,
juniPPPoEIfStatsRxInvLength,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEIfStatsRxInvPadISession,
juniPPPoEIfStatsRxInvPadRSession,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"A collection of objects providing management of PPPoE interfaces in a
Juniper product."
::= { juniPPPoEGroups 10 }
juniPPPoEServiceNameTableGroup OBJECT-GROUP
OBJECTS {
juniPPPoEServiceNameTableNextIndex,
juniPPPoEServiceNameTableName,
juniPPPoEServiceNameTableEmptyAction,
juniPPPoEServiceNameTableRowStatus,
juniPPPoEServiceNameAction,
juniPPPoEServiceNameRowStatus }
STATUS obsolete
DESCRIPTION
"A collection of objects providing management of PPPoE service-name
tables in a Juniper product. This group became obsolete when
juniPPPoEServiceNameTableUnknownAction object is added"
::= { juniPPPoEGroups 11 }
juniPPPoEGroup7 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfServiceNameTable,
juniPPPoEIfPadrRemoteCircuitIdCapture,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvTagLength,
juniPPPoEIfStatsRxInvLength,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEIfStatsRxInvPadISession,
juniPPPoEIfStatsRxInvPadRSession,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"A collection of objects providing management of PPPoE interfaces in a
Juniper product."
::= { juniPPPoEGroups 12 }
juniPPPoEGroup8 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfServiceNameTable,
juniPPPoEIfPadrRemoteCircuitIdCapture,
juniPPPoEIfMtu,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvTagLength,
juniPPPoEIfStatsRxInvLength,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEIfStatsRxInvPadISession,
juniPPPoEIfStatsRxInvPadRSession,
juniPPPoEGlobalMotm }
STATUS current
DESCRIPTION
"A collection of objects providing management of PPPoE interfaces in a
Juniper product."
::= { juniPPPoEGroups 13 }
juniPPPoELockoutTableGroup OBJECT-GROUP
OBJECTS {
juniPPPoEIfLockoutTime,
juniPPPoEIfLockoutElapsedTime,
juniPPPoEIfLockoutNextTime }
STATUS current
DESCRIPTION
"A collection of objects providing management of PPPoE lockout
tables in a Juniper product."
::= { juniPPPoEGroups 14 }
juniPPPoEGroup9 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfServiceNameTable,
juniPPPoEIfPadrRemoteCircuitIdCapture,
juniPPPoEIfMtu,
juniPPPoEIfLockoutMin,
juniPPPoEIfLockoutMax,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvTagLength,
juniPPPoEIfStatsRxInvLength,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEIfStatsRxInvPadISession,
juniPPPoEIfStatsRxInvPadRSession,
juniPPPoEGlobalMotm }
STATUS obsolete
DESCRIPTION
"A collection of objects providing management of PPPoE interfaces in a
Juniper product."
::= { juniPPPoEGroups 15 }
juniPPPoEGroup10 OBJECT-GROUP
OBJECTS {
juniPPPoENextIfIndex,
juniPPPoEIfIfIndex,
juniPPPoEIfMaxNumSessions,
juniPPPoEIfRowStatus,
juniPPPoEIfLowerIfIndex,
juniPPPoEIfAcName,
juniPPPoEIfDupProtect,
juniPPPoEIfPADIFlag,
juniPPPoEIfAutoconfig,
juniPPPoEIfServiceNameTable,
juniPPPoEIfPadrRemoteCircuitIdCapture,
juniPPPoEIfMtu,
juniPPPoEIfLockoutMin,
juniPPPoEIfLockoutMax,
juniPPPoEMaxSessionVsa,
juniPPPoEIfStatsRxPADI,
juniPPPoEIfStatsTxPADO,
juniPPPoEIfStatsRxPADR,
juniPPPoEIfStatsTxPADS,
juniPPPoEIfStatsRxPADT,
juniPPPoEIfStatsTxPADT,
juniPPPoEIfStatsRxInvVersion,
juniPPPoEIfStatsRxInvCode,
juniPPPoEIfStatsRxInvTags,
juniPPPoEIfStatsRxInvTagLength,
juniPPPoEIfStatsRxInvLength,
juniPPPoEIfStatsRxInvTypes,
juniPPPoEIfStatsRxInvPackets,
juniPPPoEIfStatsRxInsufficientResources,
juniPPPoEIfStatsTxPADM,
juniPPPoEIfStatsTxPADN,
juniPPPoEIfStatsRxInvPadISession,
juniPPPoEIfStatsRxInvPadRSession,
juniPPPoEGlobalMotm }
STATUS current
DESCRIPTION
"A collection of objects providing management of PPPoE interfaces in a
Juniper product."
::= { juniPPPoEGroups 16 } -- JUNOSe 9.3
juniPPPoEServiceNameTableGroup1 OBJECT-GROUP
OBJECTS {
juniPPPoEServiceNameTableNextIndex,
juniPPPoEServiceNameTableName,
juniPPPoEServiceNameTableEmptyAction,
juniPPPoEServiceNameTableRowStatus,
juniPPPoEServiceNameAction,
juniPPPoEServiceNameRowStatus,
juniPPPoEServiceNameTableUnknownAction}
STATUS current
DESCRIPTION
"A collection of objects providing management of PPPoE service-name
tables in a Juniper product."
::= { juniPPPoEGroups 17 } -- JUNOSe 10.1
END
Reference in New Issue Copy Permalink