david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junose/Juniper-System-Clock-MIB

1678 lines
62 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-System-Clock-MIB
--
-- Juniper Networks Enterprise MIB
-- System Clock MIB
--
-- Copyright (c) 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-System-Clock-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DateAndTime, DisplayString, TruthValue, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
JuniEnable
FROM Juniper-TC
juniMibs
FROM Juniper-MIBs;
juniSysClockMIB MODULE-IDENTITY
LAST-UPDATED "200512141401Z" -- 14-Dec-05 10:01 AM EDT
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"
DESCRIPTION
"The System Clock and Network Time Protocol (NTP) MIB for the Juniper
Networks enterprise.
The System Clock section of the MIB allows setting the system clock
time, date and timezone. All definitions are based on the Gregorian
calendar.
The NTP portion of the MIB provides management for the local NTP
client/server, which adheres to RFC 1305, the 'Network Time Protocol
(Version 3) Specification, Implementation and Analysis'."
-- Revision History
REVISION "200703221400Z" -- 22-Mar-07 10:00 AM EDT - JUNOSe7.1
DESCRIPTION
"Incorporate 2007 U.S.A. Daylight Saving Time changes."
REVISION "200512141401Z" -- 14-Dec-05 10:01 AM EDT - JUNOSe 7.0
DESCRIPTION
"Added juniNtpPeerLastUpdateTime to Peer Table."
REVISION "200309151401Z" -- 15-Sep-03 10:01 AM EDT - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names."
REVISION "200309121337Z" -- 12-Sep-03 09:37 AM EDT - JUNOSe 4.1
DESCRIPTION
"Added an indicator to stratum number that no stratum is set.
Added traps for significant NTP state changes.
Added replacement clock offset and frequency error objects with
DisplaySting syntax."
REVISION "200204041456Z" -- 04-Apr-02 09:56 AM EST - JUNOSe 4.0
DESCRIPTION
"Initial version of this MIB module."
::= { juniMibs 56 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JuniSysClockMonth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The month of the year."
SYNTAX INTEGER {
january(1),
february(2),
march(3),
april(4),
may(5),
june(6),
july(7),
august(8),
september(9),
october(10),
november(11),
december(12) }
JuniSysClockWeekOfTheMonth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The week of the month."
SYNTAX INTEGER {
weekFirst(0),
weekOne(1),
weekTwo(2),
weekThree(3),
weekFour(4),
weekFive(5),
weekLast(6) }
JuniSysClockDayOfTheWeek ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The day of the week."
SYNTAX INTEGER {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6) }
JuniSysClockHour ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The hour of the day. Uses 24-hour clock format."
SYNTAX Integer32 (0..23)
JuniSysClockMinute ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The minute of the hour."
SYNTAX Integer32 (0..59)
--
-- NTP textual-conventions
--
JuniNtpTimeStamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ASCII character representation of time in 64-bit unsigned long
format, where the integer part is the first 32 bits and the fraction
part is the last 32 bits. This represents the time stamp as defined in
the NTP packet header format, which is the number of seconds since 1
January 1900. The textual form of an unsigned decimal number is taken
from the NVT ASCII graphics character set (codes 46 and 48 through 57)."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992.
J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983."
SYNTAX OCTET STRING (SIZE(0..21))
JuniNtpClockSignedTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ASCII character representation of NTP clock error time in seconds
as a signed value. The first 16 bits represents integer part of the
signed value and the last 16 bits represents the fraction part of the
signed value. The textual form of a signed decimal number is taken from
the NVT ASCII graphics character set (codes 43, 45, 46 and 48 through
57)."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992.
J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983."
SYNTAX OCTET STRING (SIZE(0..11))
JuniNtpClockUnsignedTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ASCII character representation of NTP clock error time in seconds
as an unsigned value. The first 8 bits represents the integer part of
the unsigned value and the last 48 bits represents the fraction part of
the unsigned value. The textual form of an unsigned decimal number is
taken from the NVT ASCII graphics character set (codes 46 and 48 through
57)."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992.
J. Postel & J. Reynolds, 'NVT ASCII character set', RFC-854, May 1983"
SYNTAX OCTET STRING (SIZE(0..11))
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniSysClockObjects OBJECT IDENTIFIER ::= { juniSysClockMIB 1 }
juniNtpObjects OBJECT IDENTIFIER ::= { juniSysClockMIB 2 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- System clock time, date and timezone configurations.
--
-- This section of the MIB allows setting the system clock time, date and
-- timezone. All definitions are based on the Gregorian calendar.
--
-- Time and date fields to be set in juniSysClockDateAndTime object:
-- field octets contents range
-- ===== ====== ======== =====
-- 1 1-2 year 0..65536 - may be restricted
-- 2 3 month 1..12
-- 3 4 day 1..31
-- 4 5 hour 0..23
-- 5 6 minutes 0..59
-- 6 7 seconds 0..60 - use 60 for leap-second
-- 7 8 deci-seconds 0..9 - ignored
-- 8 9 direction from UTC '+' / '-'
-- 9 10 hours from UTC 0..13
-- 10 11 minutes from UTC 0..59
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- The system clock object definitions are organized into the following
-- functional sections:
--
juniSysClockTime OBJECT IDENTIFIER ::= { juniSysClockObjects 1 }
juniSysClockDst OBJECT IDENTIFIER ::= { juniSysClockObjects 2 }
--//////////////////////////////////////////////////////////////////////////////
--
-- System time settings.
--
--//////////////////////////////////////////////////////////////////////////////
juniSysClockDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to manage the system clock time, date and timezone.
If the Network Time Protocol (NTP) is enabled, attempts to set this
object will result in an inconsistantValue error. For sets, the
implementation may check the value of the year and if it is outside of a
'reasonable' range (e.g., 1999..2035) it may return an inconsistantValue
error. Only system clock time and date will be set if the timezone
offset is not set along with the timezone name."
::= { juniSysClockTime 1 }
juniSysClockTimeZoneName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the timezone. Timezone name take effects only with its offset
set along with it."
::= { juniSysClockTime 2 }
--//////////////////////////////////////////////////////////////////////////////
--
-- Summer time daylight savings time (DST) settings.
--
-- This group of objects are used to manage day light saving time in two modes.
-- 1. Absolute mode - This can only be set for a single year at a time.
-- 2. Recurrent mode - Remains in effect until it is reset.
-- 3. RecognizedUS - Use defaults for known USA timezones.
--
-- The above modes are mutually exclusive.
--
--//////////////////////////////////////////////////////////////////////////////
juniSysClockDstName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the daylight savings time (DST) zone. Setting any standard
US DST timezone name with recurrent mode will result in turning on
corresponding DST recurrent mode values for the timezone."
::= { juniSysClockDst 1 }
juniSysClockDstOffset OBJECT-TYPE
SYNTAX Integer32 (1..1440)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The offset, in minutes, from the base timezone for the DST."
DEFVAL { 60 }
::= { juniSysClockDst 2 }
juniSysClockDstStatus OBJECT-TYPE
SYNTAX INTEGER {
off(0),
recurrent(1),
absolute(2),
recognizedUS(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of DST. With each state, only corresponding objects can be
set. When the state is off(0), set values will be ignored."
::= { juniSysClockDst 3 }
--
-- Absolute daylight savings time (DST) objects
--
juniSysClockDstAbsoluteStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the start time for absolute DST. Only the year,
month, day, hour and minutes fields of the object are used. The other
fields will be ignored for a Set operation and will return zeroes for a
Get operation."
::= { juniSysClockDst 4 }
juniSysClockDstAbsoluteStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the stop time for absolute DST. Only the year,
month, day, hour and minutes fields of the object are used. The other
fields will be ignored for a Set operation and will return zeroes when
read."
::= { juniSysClockDst 5 }
--
-- Recurrent daylight savings time (DST)
--
-- The default values are based on the 1987 law for the USA.
-- If none of the recurrent objects are not set below, if all other
-- conditions are ok, appropriate default values will take effect.
--
juniSysClockDstRecurStartMonth OBJECT-TYPE
SYNTAX JuniSysClockMonth
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start month for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { march }
::= { juniSysClockDst 6 }
juniSysClockDstRecurStartWeek OBJECT-TYPE
SYNTAX JuniSysClockWeekOfTheMonth
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start week of the month for DST recurrence. The default value is
based on the 2007 law for the USA."
DEFVAL { weekTwo }
::= { juniSysClockDst 7 }
juniSysClockDstRecurStartDay OBJECT-TYPE
SYNTAX JuniSysClockDayOfTheWeek
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start day of the week for DST recurrence. The default value is
based on the 2007 law for the USA."
DEFVAL { sunday }
::= { juniSysClockDst 8 }
juniSysClockDstRecurStartHour OBJECT-TYPE
SYNTAX JuniSysClockHour
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start hour for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { 1 }
::= { juniSysClockDst 9 }
juniSysClockDstRecurStartMinute OBJECT-TYPE
SYNTAX JuniSysClockMinute
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start minute for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { 0 }
::= { juniSysClockDst 10 }
juniSysClockDstRecurStopMonth OBJECT-TYPE
SYNTAX JuniSysClockMonth
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stop month for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { november }
::= { juniSysClockDst 11 }
juniSysClockDstRecurStopWeek OBJECT-TYPE
SYNTAX JuniSysClockWeekOfTheMonth
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stop week of the month for DST recurrence. The default value is
based on the 2007 law for the USA."
DEFVAL { weekFirst }
::= { juniSysClockDst 12 }
juniSysClockDstRecurStopDay OBJECT-TYPE
SYNTAX JuniSysClockDayOfTheWeek
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stop day of the week for DST recurrence. The default value is
based on the 2007 law for the USA."
DEFVAL { sunday }
::= { juniSysClockDst 13 }
juniSysClockDstRecurStopHour OBJECT-TYPE
SYNTAX JuniSysClockHour
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stop hour for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { 2 }
::= { juniSysClockDst 14 }
juniSysClockDstRecurStopMinute OBJECT-TYPE
SYNTAX JuniSysClockMinute
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stop minutes for DST recurrence. The default value is based on the
2007 law for the USA."
DEFVAL { 0 }
::= { juniSysClockDst 15 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP MIB object definitions are organized into the following functional
-- sections:
--
-- /////////////////////////////////////////////////////////////////////////////
juniNtpSysClock OBJECT IDENTIFIER ::= { juniNtpObjects 1 }
juniNtpClient OBJECT IDENTIFIER ::= { juniNtpObjects 2 }
juniNtpServer OBJECT IDENTIFIER ::= { juniNtpObjects 3 }
juniNtpPeers OBJECT IDENTIFIER ::= { juniNtpObjects 4 }
juniNtpAccessGroup OBJECT IDENTIFIER ::= { juniNtpObjects 5 }
--
-- Note: 1. juniNtpSysClock, juniNtpClient and juniNtpPeers object groups are
-- system wide configurations.
-- 2. juniNtpServer and juniNtpAccessGroup are per router configurations.
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP system clock status data
--
-- /////////////////////////////////////////////////////////////////////////////
juniNtpSysClockState OBJECT-TYPE
SYNTAX INTEGER {
neverFrequencyCalibrated(0),
frequencyCalibrated(1),
setToServerTime(2),
frequencyCalibrationIsGoingOn(3),
synchronized(4),
spikeDetected(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the state of the NTP on the system clock. Clock states are:
0 - Clock has never been calibrated for frequency errors
1 - Clock frequency errors calibration has done
2 - Clock time has set to server time
3 - Clock frequency errors calibration is going on
4 - Clock has synchronized its time
5 - Clock has detected spike "
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpSysClock 1 }
juniNtpSysClockOffsetError OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Displays the estimated offset error of the system clock relative to the
master clock in seconds. This variable can take on both positive and
negative values; the value will be positive if the system clock is ahead
of the master clock; the value will be negative if the system clock is
behind the master clock. This offset value will be used by the internal
NTP filter algorithm to adjust the system clock to correct any error it
may have.
This object has been deprecated in favor of the
juniNtpSysClockOffsetErrorNew object, which uses DisplayString for its
SYNTAX."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpSysClock 2 }
juniNtpSysClockFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITS "ppm"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Displays the system clock frequency error in parts per million (ppm).
It will always be a positive value. This error adjustment happens when
the system reboots or the NTP is enabled for the first time and it may
take up to fifteen minutes to complete.
Each system clock oscillator interrupts to update its clock. If, for
example, it interrupts one million time per second then it has a
resolution of microseconds. This is also the frequency of the clock
update. Frequency error means that this system clock failed to update
by parts per millionth of a second.
For example, if the frequency error is 1ppm, it means the clock is ahead
by 0.864 second in a day, and therefore the clock will need to be
corrected by that amount in the next 24 hours for the clock to be
accurate.
The frequency error varies with temperature. Therefore the system clock
will usually need to be corrected when the system boots, based on the
temperature at which it is operating.
This object has been deprecated in favor of the
juniNtpSysClockFrequencyErrorNew object, which uses DisplayString for
its SYNTAX."
::= { juniNtpSysClock 3 }
juniNtpSysClockRootDelay OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the NTP time message total Network roundtrip delay to
the primary reference source at the root of the synchronization subnet,
in seconds. Note that this variable can take on both positive and
negative values, depending on clock precision and skew."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpSysClock 4 }
juniNtpSysClockRootDispersion OBJECT-TYPE
SYNTAX JuniNtpClockUnsignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the maximum error relative to the primary reference
source at the root of the synchronization subnet, in seconds. Only
positive values greater than zero are possible."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpSysClock 5 }
juniNtpSysClockStratumNumber OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the stratum number of the system clock.
-1 - shows stratum is not set
1 - primary reference (e.g. calibrated atomic clock, radio clock)
2-255 - secondary reference (via NTP) "
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpSysClock 6 }
juniNtpSysClockLastUpdateTime OBJECT-TYPE
SYNTAX JuniNtpTimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the time of the system clock at the time when it was last
updated by any associated NTP server(peer)."
::= { juniNtpSysClock 7 }
juniNtpSysClockLastUpdateServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the IP address of the NTP server (peer) which done last update
to the system clock."
::= { juniNtpSysClock 8 }
juniNtpSysClockOffsetErrorNew OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..25))
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the estimated offset error of the system clock relative to the
master clock in seconds. This variable can take on both positive and
negative values; the value will be positive if the system clock is ahead
of the master clock; the value will be negative if the system clock is
behind the master clock. This offset value will be used by the internal
NTP filter algorithm to adjust the system clock to correct any error it
may have."
::= { juniNtpSysClock 9 }
juniNtpSysClockFrequencyErrorNew OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..25))
UNITS "ppm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the system clock frequency error in parts per million (ppm).
It will always be a positive value. This error adjustment happens when
the system reboots or the NTP is enabled for the first time and it may
take up to fifteen minutes to complete.
Each system clock oscillator interrupts to update its clock. If, for
example, it interrupts one million time per second then it has a
resolution of microseconds. This is also the frequency of the clock
update. Frequency error means that this system clock failed to update
by parts per millionth of a second.
For example, if the frequency error is 1ppm, it means the clock is ahead
by 0.864 second in a day, and therefore the clock will need to be
corrected by that amount in the next 24 hours for the clock to be
accurate.
The frequency error varies with temperature. Therefore the system clock
will usually need to be corrected when the system boots, based on the
temperature at which it is operating."
::= { juniNtpSysClock 10 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP client configurations
--
-- Note: Any router can be enabled as a NTP client and but one at time for whole
-- of the system.
-- /////////////////////////////////////////////////////////////////////////////
juniNtpClientAdminStatus OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By enabling/disabling the NTP admin status, the router is enabled/
disabled to run as NTP client for the correction and synchronization of
the system clock time with the reliable time sources (stratum time
servers). At any given time, only one NTP client can run on any router
on the system.
Sets the NTP admin status along with the routerIndex where NTP client
has be enabled in that router context."
DEFVAL { disable }
::= { juniNtpClient 1 }
juniNtpClientSystemRouterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the router to be enabled or disabled as the system-wide
NTP client. Always set along with juniNtpClientAdminStatus.
This is also the router context when NTP is enabled."
::= { juniNtpClient 2 }
juniNtpClientPacketSourceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the NTP client sends an NTP packet, the source IP address is
normally set to the address of the interface through which the NTP
packet is sent.
Sets all the outgoing NTP packets' source ifIndex to one specific
ifIndex on the NTP client from which the source ifIndex is taken. This
ifIndex will be the index of the IP interface as NTP is IP/UDP based.
If the value is zero, it means no interface has configured."
::= { juniNtpClient 3 }
juniNtpClientBroadcastDelay OBJECT-TYPE
SYNTAX Integer32 (0..999999)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to set the estimated round-trip broadcast delay between the
system client and broadcast servers (peers)."
DEFVAL { 3000 }
::= { juniNtpClient 4 }
juniNtpClientIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniNtpClientIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lists all the NTP client's interfaces enabled for NTP. All the IP
interfaces on the NTP client are by default enabled for NTP
communications and can be disabled individually on each IP interface.
If desired, any IP interface can be blocked from participating in NTP
communication."
::= { juniNtpClient 5 }
juniNtpClientIfEntry OBJECT-TYPE
SYNTAX JuniNtpClientIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is per interface config for NTP."
INDEX { juniNtpClientIfRouterIndex,
juniNtpClientIfIfIndex }
::= { juniNtpClientIfTable 1 }
JuniNtpClientIfEntry ::= SEQUENCE {
juniNtpClientIfRouterIndex Unsigned32,
juniNtpClientIfIfIndex Integer32,
juniNtpClientIfDisable TruthValue,
juniNtpClientIfIsBroadcastClient TruthValue,
juniNtpClientIfIsBroadcastServer TruthValue,
juniNtpClientIfIsBroadcastServerVersion Integer32,
juniNtpClientIfIsBroadcastServerDelay Integer32}
juniNtpClientIfRouterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the router to be enabled or disabled as an NTP client."
::= { juniNtpClientIfEntry 1 }
juniNtpClientIfIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the interface on the NTP client."
::= { juniNtpClientIfEntry 2 }
juniNtpClientIfDisable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable NTP on the interface."
::= { juniNtpClientIfEntry 3 }
juniNtpClientIfIsBroadcastClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable NTP client's interface as broadcast client. As NTP
client's broadcast interface, it receives the broadcast NTP messages
from the associated servers (peers)."
::= { juniNtpClientIfEntry 4 }
juniNtpClientIfIsBroadcastServer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable NTP interface as broadcast server. As NTP server's
broadcast interface, it broadcast NTP messages on the interfac."
::= { juniNtpClientIfEntry 5 }
juniNtpClientIfIsBroadcastServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP Server Version on the NTP broadcast server interface. Default
version is 3"
DEFVAL { 3}
::= { juniNtpClientIfEntry 6 }
juniNtpClientIfIsBroadcastServerDelay OBJECT-TYPE
SYNTAX Integer32 (4..17)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Poll Interval for broadcasting NTP messages in seconds as a power of
two. Default value is 6(64s). Minimal value is 4(16s) and maximum value
is 17 (36.4h)."
DEFVAL {6}
::= { juniNtpClientIfEntry 7 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP server configurations on the system
-- Note: Any and every router can be NTP server on the system
-- and all servers' common time source is system clock
-- /////////////////////////////////////////////////////////////////////////////
juniNtpServerStratumNumber OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the stratum number (level) of the NTP server. Due to one
system clock, setting the stratum number have a effect of setting all
the NTP servers' stratum to one stratum number(level) on the system."
DEFVAL { 8 }
::= { juniNtpServer 1 }
juniNtpServerAdminStatus OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the NTP server on the router."
::= { juniNtpServer 2 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP peers' associations
-- Note: These are the NTP servers running on different hosts associated with
-- one NTP client on the system for time synchronisation.
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- Peer config table
--
juniNtpPeerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniNtpPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the peers with which the NTP client
has associations. The associated peers(servers) to client will be
running different hosts."
::= { juniNtpPeers 1 }
juniNtpPeerCfgEntry OBJECT-TYPE
SYNTAX JuniNtpPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides one NTP server's configuration information. Each
peer is uniquely identified by the routerIndex of the client to which it
has to be associated and the Ip address of the remote server(peer)
itself.
Entries are automatically created when the user configures the remote
peer NTP server info on the system which has to be associated with the
NTP client and deleted when the user removes the peer association from
the NTP server."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
INDEX { juniNtpClientIfRouterIndex,
juniNtpPeerCfgIpAddress }
::= { juniNtpPeerCfgTable 1 }
JuniNtpPeerCfgEntry ::= SEQUENCE {
juniNtpPeerCfgIpAddress IpAddress,
juniNtpPeerCfgNtpVersion Integer32,
juniNtpPeerCfgPacketSourceIfIndex Integer32,
juniNtpPeerCfgIsPreferred TruthValue,
juniNtpPeerCfgRowStatus RowStatus }
juniNtpPeerCfgIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer's IP address."
::= { juniNtpPeerCfgEntry 1 }
juniNtpPeerCfgNtpVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Displays the peer server NTP software version."
::= { juniNtpPeerCfgEntry 2 }
juniNtpPeerCfgPacketSourceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All the outgoing NTP packets' source address can be configured to one
specific interface address on the NTP peer server.
This object allows to configure all the outgoing NTP packets' source IP
ifIndex to one specific IP ifIndex on the NTP server."
::= { juniNtpPeerCfgEntry 3 }
juniNtpPeerCfgIsPreferred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Select whether this NTP server is a preferred time source to the
NTP client to which it has association."
::= { juniNtpPeerCfgEntry 4 }
juniNtpPeerCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniNtpPeerCfgRowStatus "
::= { juniNtpPeerCfgEntry 5 }
--
-- Peer data table
--
juniNtpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniNtpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the peers with which the NTP client
has associations. The associated peers (servers) to client will be
running different hosts."
::= { juniNtpPeers 2 }
juniNtpPeerEntry OBJECT-TYPE
SYNTAX JuniNtpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides one NTP server (peer) information. Each peer is
uniquely identified by the routerIndex of the client to which it has to
be associated and the Ip address of the remote server (peer) itself.
Entries are automatically created when the user configures the remote
peer NTP server info on the system which has to be associated with the
NTP client and deleted when the user removes the peer association from
the NTP server."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
INDEX { juniNtpClientIfRouterIndex,
juniNtpPeerCfgIpAddress }
::= { juniNtpPeerTable 1 }
JuniNtpPeerEntry ::= SEQUENCE {
juniNtpPeerState OCTET STRING,
juniNtpPeerStratumNumber Integer32,
juniNtpPeerAssociationMode INTEGER,
juniNtpPeerBroadcastInterval Integer32,
juniNtpPeerPolledInterval Integer32,
juniNtpPeerPollingInterval Integer32,
juniNtpPeerDelay JuniNtpClockSignedTime,
juniNtpPeerDispersion JuniNtpClockUnsignedTime,
juniNtpPeerOffsetError JuniNtpClockSignedTime,
juniNtpPeerReachability OCTET STRING,
juniNtpPeerPrecision JuniNtpClockSignedTime,
juniNtpPeerRootDelay JuniNtpClockSignedTime,
juniNtpPeerRootDispersion JuniNtpClockUnsignedTime,
juniNtpPeerRootSyncDistance JuniNtpClockSignedTime,
juniNtpPeerRootTime JuniNtpTimeStamp,
juniNtpPeerRootTimeUpdateServer IpAddress,
juniNtpPeerReceiveTime JuniNtpTimeStamp,
juniNtpPeerTransmitTime JuniNtpTimeStamp,
juniNtpPeerRequestTime JuniNtpTimeStamp,
juniNtpPeerLastUpdateTime Unsigned32 }
juniNtpPeerState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server association state to NTP client on the system.
Bit Peer State Description
--- ---------- ------------------------------------------------
0 master Means NTP client on the system has chosen this peer
server as the master.
1 configured Confirms peer server configured for the NTP client.
2 selected NTP client will consider this peer server when it
chooses the master.
3 unusable Indication that the server does not meet the initial
criteria for the master
4 preferred Indicates as preferred time source.
5 correct NTP client considers the peer server's clock is
reasonably correct.
6 incorrect NTP client considers the peer server's clock is
not reasonably correct
7 reserved
Each bit position value of 0 and 1 disables and enables that peer
state respectively. "
::= { juniNtpPeerEntry 1 }
juniNtpPeerStratumNumber OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server system clock stratum number."
::= { juniNtpPeerEntry 2 }
juniNtpPeerAssociationMode OBJECT-TYPE
SYNTAX INTEGER {
broacastServer(0),
multicastServer(1),
unicastServer(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server association mode to the NTP client on the
router.
broadcastServer - Broadcast only NTP messages.
multicastServer - Broadcast only NTP messages for IGMP multicast
Network.
unicastServer - Only sends NTP poll messages to the peer servers."
::= { juniNtpPeerEntry 3 }
juniNtpPeerBroadcastInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the broadcast time interval of the NTP time messages from the
peer when the peer is enabled either as broadcast server or multicast
server."
::= { juniNtpPeerEntry 4 }
juniNtpPeerPolledInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the time interval at which peer will be polled by NTP client
with which peer has associations when it is enabled as unicast server."
::= { juniNtpPeerEntry 5 }
juniNtpPeerPollingInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the time interval at which peer will poll the servers with
which peer has associations when it is enabled as unicast server."
::= { juniNtpPeerEntry 6 }
juniNtpPeerDelay OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server broadcast delay."
::= { juniNtpPeerEntry 7 }
juniNtpPeerDispersion OBJECT-TYPE
SYNTAX JuniNtpClockUnsignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server dispersion."
::= { juniNtpPeerEntry 8 }
juniNtpPeerOffsetError OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server offset error."
::= { juniNtpPeerEntry 9 }
juniNtpPeerReachability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer reachability status. An 8-bit number that shows
whether or not the peer server responded to the last eight requests to
the server to which it has association; one indicates a response, zero
indicates no response. Count from rightmost to leftmost as latest to
later requests as reachability states.
For example, 0b11111111 indicates that the peer server responded to the
last eight requests. If the system client reaches one peer server less
often than it does other peer servers, that server is not a good choice
for the master"
::= { juniNtpPeerEntry 10 }
juniNtpPeerRootDelay OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server root delay."
::= { juniNtpPeerEntry 11 }
juniNtpPeerRootDispersion OBJECT-TYPE
SYNTAX JuniNtpClockUnsignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server root dispersion."
::= { juniNtpPeerEntry 12 }
juniNtpPeerRootSyncDistance OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the peer server synchronization distance. Measure of the
total time error since the update in the path to the stratum 1 server."
::= { juniNtpPeerEntry 13 }
juniNtpPeerRootTime OBJECT-TYPE
SYNTAX JuniNtpTimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time at which the stratum 1 server sent clock update reply to the
this peer server."
::= { juniNtpPeerEntry 14 }
juniNtpPeerRootTimeUpdateServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the stratum 1 server last updated the peer server."
::= { juniNtpPeerEntry 15 }
juniNtpPeerReceiveTime OBJECT-TYPE
SYNTAX JuniNtpTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the peer server is either broadcast or multicast server, this will
represent time stamp at which NTP client received the broadcast message.
If it is unicast server, it represents the time stamp at which the peer
has sent the response to the NTP client poll message."
::= { juniNtpPeerEntry 16 }
juniNtpPeerTransmitTime OBJECT-TYPE
SYNTAX JuniNtpTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the peer server is either broadcast or multicast server, this will
represent time stamp at which peer sent the broadcast message. If it is
unicast server, it represents the time stamp at which the NTP client has
received response from the peer."
::= { juniNtpPeerEntry 17 }
juniNtpPeerRequestTime OBJECT-TYPE
SYNTAX JuniNtpTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For unicast server, it represents the time stamp at which the system
client sent NTP request to the peer."
::= { juniNtpPeerEntry 18 }
juniNtpPeerPrecision OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length of the clock tick (interrupt interval) of the server's clock."
::= { juniNtpPeerEntry 19 }
juniNtpPeerLastUpdateTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the seconds since the last update from the NTP server"
::= { juniNtpPeerEntry 20 }
--
-- NTP peer filter register table
-- Note: There will one table instance for each peer server associated with
-- the NTP client on the system.
juniNtpPeerFilterRegisterTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniNtpPeerFilterRegisterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The following table contains NTP state variables used by the NTP clock
filter and selection algorithms. This table depicts a shift register.
Each stage in the shift register is a 3-tuple consisting of the measured
clock offset, measured clock delay and measured clock dispersion
associated with a single observation.
The NTP clock-filter and selection algorithms are designed to minimize
the error in the calculated time by using the objects values in the
filter table."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpPeers 3 }
juniNtpPeerFilterRegisterEntry OBJECT-TYPE
SYNTAX JuniNtpPeerFilterRegisterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to one stage of the shift register and reading
one set of values clock delay, clock offset and clock dispersion.
Entries are automatically created whenever a peer is configured and
deleted when the peer is removed."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
INDEX { juniNtpPeerCfgIpAddress,
juniNtpPeerFilterIndex }
::= { juniNtpPeerFilterRegisterTable 1 }
JuniNtpPeerFilterRegisterEntry ::= SEQUENCE {
juniNtpPeerFilterIndex Unsigned32,
juniNtpPeerFilterOffset JuniNtpClockSignedTime,
juniNtpPeerFilterDelay JuniNtpClockSignedTime,
juniNtpPeerFilterDispersion JuniNtpClockUnsignedTime }
juniNtpPeerFilterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value in the specified range that is used to index into the
table. The size of the table is fixed at 8. Each entry identifies a
particular reading of the clock filter variables in the shift register.
Entries are added starting at index 1. The index wraps back to 1 when
it reaches 8. When the index wraps back, the new entries will overwrite
the old entries effectively deleting the old entry."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpPeerFilterRegisterEntry 1 }
juniNtpPeerFilterOffset OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset of the peer clock relative to the system clock in seconds."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpPeerFilterRegisterEntry 2 }
juniNtpPeerFilterDelay OBJECT-TYPE
SYNTAX JuniNtpClockSignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Roundtrip delay of the peer clock relative to the system clock over the
network path between them, in seconds. This variable can take on both
positive and negative values, depending on clock precision and
skew-error accumulation."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpPeerFilterRegisterEntry 3 }
juniNtpPeerFilterDispersion OBJECT-TYPE
SYNTAX JuniNtpClockUnsignedTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum error of the peer clock relative to the system clock over
the network path between them, in seconds. Only positive values greater
than zero are possible."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992"
::= { juniNtpPeerFilterRegisterEntry 4 }
-- /////////////////////////////////////////////////////////////////////////////
--
-- NTP router access group options
--
-- Order of the access group scanning done from least restrictive to
-- most restrive in following order:
-- 1. Peer - Allows time requests and NTP control queries and
-- allows the system to synchrozise itself to a system
-- whose address passes the access list criteria.
-- 2. Serve - Allows time requests and NTP control queries and, but
-- does not allow the system to synchronize itself to
-- a system whose address passes the access list criteria.
-- 3. Serve only - Allows only time requests from a system whose address
-- passes the access list criteria.
-- 4. Query only - Allows only NTP control queries from a system whose
-- address passes the access list criteria."
-- /////////////////////////////////////////////////////////////////////////////
juniNtpRouterAccessGroupPeer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the name of the peer access list for the NTP enabled router."
::= { juniNtpAccessGroup 1 }
juniNtpRouterAccessGroupServe OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the name of the serve access list for the NTP enabled
router."
::= { juniNtpAccessGroup 2 }
juniNtpRouterAccessGroupServeOnly OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the name of the serve-only access list for the NTP enabled
router."
::= { juniNtpAccessGroup 3 }
juniNtpRouterAccessGroupQueryOnly OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the name of the peer query-only list for the NTP enabled
router."
::= { juniNtpAccessGroup 4 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniNtpTraps OBJECT IDENTIFIER ::= { juniNtpObjects 0 }
juniNtpFrequencyCalibrationStart NOTIFICATION-TYPE
OBJECTS {
juniNtpSysClockFrequencyError }
STATUS current
DESCRIPTION
"This trap will be generated at the start of frequency synchronization."
::= { juniNtpTraps 1 }
juniNtpFrequencyCalibrationEnd NOTIFICATION-TYPE
OBJECTS {
juniNtpSysClockFrequencyError }
STATUS current
DESCRIPTION
"This trap will be generated when frequency synchronization completes
successfully."
::= { juniNtpTraps 2 }
juniNtpTimeSynUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap indicates that some kind of time synchronization has started.
This trap will be generated at the start of time synchronization with
the configured time servers irrespective of whether time synchronization
is done with all the configured time servers or any one of them (there
may be reachability or other problems) when NTP is enabled on the
router."
::= { juniNtpTraps 3 }
juniNtpTimeSynDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap will be generated when the NTP client is not able to time
synchronize with any of the configured time servers for any reasons when
NTP is enabled on the router."
::= { juniNtpTraps 4 }
juniNtpTimeServerSynUp NOTIFICATION-TYPE
OBJECTS {
juniNtpPeerCfgIsPreferred }
STATUS current
DESCRIPTION
"This trap will be generated to report the time synchronization status
of each configured time server on the router when it starts time
synchronization with the NTP client."
::= { juniNtpTraps 5 }
juniNtpTimeServerSynDown NOTIFICATION-TYPE
OBJECTS {
juniNtpPeerCfgIsPreferred }
STATUS current
DESCRIPTION
"This trap will be generated to report the time synchronization status
of each configured time server on the router when it stops time
synchronization with the NTP client for any reasons."
::= { juniNtpTraps 6 }
juniNtpFirstSystemClockSet NOTIFICATION-TYPE
OBJECTS {
juniNtpSysClockOffsetError,
juniNtpSysClockState }
STATUS current
DESCRIPTION
"This trap will be generated to report when the system clock offset
error is set for the first time from the good time sample taken,
enabling the time synchronization. This is usually the case after a
system reboot."
::= { juniNtpTraps 7 }
juniNtpClockOffSetLimitCrossed NOTIFICATION-TYPE
OBJECTS {
juniNtpSysClockOffsetError,
juniNtpSysClockState }
STATUS current
DESCRIPTION
"This trap will be generated whenever the system clock's offset error is
more than 15 minutes. This is an indication that something is not set
properly, since an offset of 15 minutes is not considered to be a normal
offset error compared to the accuracy of the time servers and system
clock. For example, it may indicate an improper setting of the
timezone."
::= { juniNtpTraps 8 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniSysClockConformance OBJECT IDENTIFIER ::= { juniSysClockMIB 3 }
juniSysClockCompliances OBJECT IDENTIFIER ::= { juniSysClockConformance 1 }
juniSysClockGroups OBJECT IDENTIFIER ::= { juniSysClockConformance 2 }
--
-- compliance statements
--
juniSysClockCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities that implement the Juniper
System Clock MIB. This statement became obsolete when NTP traps were
added."
MODULE -- this module
MANDATORY-GROUPS {
juniSysClockTimeGroup,
juniSysClockDstGroup,
juniNtpSysClockGroup,
juniNtpClientGroup,
juniNtpServerGroup,
juniNtpPeersGroup,
juniNtpAccessGroupGroup }
::= { juniSysClockCompliances 1 } -- JUNOSe 4.0
juniSysClockCompliance2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for entities that implement the Juniper
System Clock MIB. This statement became obsolete when new offset and
frequency error objects were added."
MODULE -- this module
MANDATORY-GROUPS {
juniSysClockTimeGroup,
juniSysClockDstGroup,
juniNtpSysClockGroup,
juniNtpClientGroup,
juniNtpServerGroup,
juniNtpPeersGroup,
juniNtpAccessGroupGroup,
juniNtpNotificationGroup }
::= { juniSysClockCompliances 2 } -- JUNOSe 4.1
juniSysClockCompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement the Juniper System
Clock MIB."
MODULE -- this module
MANDATORY-GROUPS {
juniSysClockTimeGroup,
juniSysClockDstGroup,
juniNtpSysClockGroup2,
juniNtpClientGroup,
juniNtpServerGroup,
juniNtpPeersGroup,
juniNtpAccessGroupGroup,
juniNtpNotificationGroup }
::= { juniSysClockCompliances 3 } -- JUNOSe 4.1
--
-- units of conformance
--
juniSysClockTimeGroup OBJECT-GROUP
OBJECTS {
juniSysClockDateAndTime,
juniSysClockTimeZoneName }
STATUS current
DESCRIPTION
"The management objects pertaining to the System Clock current date and
time."
::= { juniSysClockGroups 1 } -- JUNOSe 4.0
juniSysClockDstGroup OBJECT-GROUP
OBJECTS {
juniSysClockDstName,
juniSysClockDstOffset,
juniSysClockDstStatus,
juniSysClockDstAbsoluteStartTime,
juniSysClockDstAbsoluteStopTime,
juniSysClockDstRecurStartMonth,
juniSysClockDstRecurStartWeek,
juniSysClockDstRecurStartDay,
juniSysClockDstRecurStartHour,
juniSysClockDstRecurStartMinute,
juniSysClockDstRecurStopMonth,
juniSysClockDstRecurStopWeek,
juniSysClockDstRecurStopDay,
juniSysClockDstRecurStopHour,
juniSysClockDstRecurStopMinute }
STATUS current
DESCRIPTION
"The management objects pertaining to the System Clock daylight savings
time information."
::= { juniSysClockGroups 2 } -- JUNOSe 4.0
juniNtpSysClockGroup OBJECT-GROUP
OBJECTS {
juniNtpSysClockState,
juniNtpSysClockOffsetError,
juniNtpSysClockFrequencyError,
juniNtpSysClockRootDelay,
juniNtpSysClockRootDispersion,
juniNtpSysClockStratumNumber,
juniNtpSysClockLastUpdateTime,
juniNtpSysClockLastUpdateServer }
STATUS obsolete
DESCRIPTION
"Obsolete management objects pertaining to the system clock when NTP is
configured on the system. This group became obsolete when replacement
clock offset and frequency error objects with DisplaySting syntax were
added."
::= { juniSysClockGroups 3 } -- JUNOSe 4.0
juniNtpClientGroup OBJECT-GROUP
OBJECTS {
juniNtpClientAdminStatus,
juniNtpClientSystemRouterIndex,
juniNtpClientPacketSourceIfIndex,
juniNtpClientBroadcastDelay,
juniNtpClientIfDisable,
juniNtpClientIfIsBroadcastClient }
STATUS current
DESCRIPTION
"The management objects pertaining to the NTP client group."
::= { juniSysClockGroups 4 } -- JUNOSe 4.0
juniNtpServerGroup OBJECT-GROUP
OBJECTS {
juniNtpServerAdminStatus,
juniNtpServerStratumNumber }
STATUS current
DESCRIPTION
"The management objects pertaining to the NTP server group."
::= { juniSysClockGroups 5 } -- JUNOSe 4.0
juniNtpPeersGroup OBJECT-GROUP
OBJECTS {
juniNtpPeerState,
juniNtpPeerStratumNumber,
juniNtpPeerAssociationMode,
juniNtpPeerBroadcastInterval,
juniNtpPeerPolledInterval,
juniNtpPeerPollingInterval,
juniNtpPeerDelay,
juniNtpPeerDispersion,
juniNtpPeerOffsetError,
juniNtpPeerReachability,
juniNtpPeerPrecision,
juniNtpPeerRootDelay,
juniNtpPeerRootDispersion,
juniNtpPeerRootSyncDistance,
juniNtpPeerRootTime,
juniNtpPeerRootTimeUpdateServer,
juniNtpPeerReceiveTime,
juniNtpPeerTransmitTime,
juniNtpPeerRequestTime,
juniNtpPeerFilterOffset,
juniNtpPeerFilterDelay,
juniNtpPeerFilterDispersion,
juniNtpPeerCfgNtpVersion,
juniNtpPeerCfgPacketSourceIfIndex,
juniNtpPeerCfgIsPreferred,
juniNtpPeerCfgRowStatus }
STATUS obsolete
DESCRIPTION
"The management objects pertaining to the NTP peers group."
::= { juniSysClockGroups 6 } -- JUNOSe 4.0
juniNtpAccessGroupGroup OBJECT-GROUP
OBJECTS {
juniNtpRouterAccessGroupPeer,
juniNtpRouterAccessGroupServe,
juniNtpRouterAccessGroupServeOnly,
juniNtpRouterAccessGroupQueryOnly }
STATUS current
DESCRIPTION
"The management objects pertaining to the NTP per router access group."
::= { juniSysClockGroups 7 } -- JUNOSe 4.0
juniNtpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
juniNtpFrequencyCalibrationStart,
juniNtpFrequencyCalibrationEnd,
juniNtpTimeSynUp,
juniNtpTimeSynDown,
juniNtpTimeServerSynUp,
juniNtpTimeServerSynDown,
juniNtpFirstSystemClockSet,
juniNtpClockOffSetLimitCrossed }
STATUS current
DESCRIPTION
"The management notifications pertaining to NTP state changes."
::= { juniSysClockGroups 8 } -- JUNOSe 4.1
juniNtpSysClockGroup2 OBJECT-GROUP
OBJECTS {
juniNtpSysClockState,
juniNtpSysClockRootDelay,
juniNtpSysClockRootDispersion,
juniNtpSysClockStratumNumber,
juniNtpSysClockLastUpdateTime,
juniNtpSysClockLastUpdateServer,
juniNtpSysClockOffsetErrorNew,
juniNtpSysClockFrequencyErrorNew }
STATUS current
DESCRIPTION
"The management objects pertaining to the system clock when NTP is
configured on the system."
::= { juniSysClockGroups 9 } -- JUNOSe 4.1
juniNtpSysClockDeprecatedGroup OBJECT-GROUP
OBJECTS {
juniNtpSysClockOffsetError,
juniNtpSysClockFrequencyError }
STATUS deprecated
DESCRIPTION
"Deprecated management objects pertaining to the system clock when NTP
is configured on the system."
::= { juniSysClockGroups 10 } -- JUNOSe 4.1
juniNtpPeersGroup1 OBJECT-GROUP
OBJECTS {
juniNtpPeerState,
juniNtpPeerStratumNumber,
juniNtpPeerAssociationMode,
juniNtpPeerBroadcastInterval,
juniNtpPeerPolledInterval,
juniNtpPeerPollingInterval,
juniNtpPeerDelay,
juniNtpPeerDispersion,
juniNtpPeerOffsetError,
juniNtpPeerReachability,
juniNtpPeerPrecision,
juniNtpPeerRootDelay,
juniNtpPeerRootDispersion,
juniNtpPeerRootSyncDistance,
juniNtpPeerRootTime,
juniNtpPeerRootTimeUpdateServer,
juniNtpPeerReceiveTime,
juniNtpPeerTransmitTime,
juniNtpPeerRequestTime,
juniNtpPeerFilterOffset,
juniNtpPeerFilterDelay,
juniNtpPeerFilterDispersion,
juniNtpPeerCfgNtpVersion,
juniNtpPeerCfgPacketSourceIfIndex,
juniNtpPeerCfgIsPreferred,
juniNtpPeerCfgRowStatus,
juniNtpPeerLastUpdateTime }
STATUS current
DESCRIPTION
"The management objects pertaining to the NTP peers group."
::= { juniSysClockGroups 11 } -- JUNOSe 7.0
END
Reference in New Issue Copy Permalink