mibs/MIBS/junose/Juniper-UNI-IF-MIB

441 lines
16 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-UNI-IF-MIB
--
-- Juniper Networks Enterprise MIB
-- Interfaces MIB
--
-- Copyright (c) 1998 Redstone Communications, Inc.
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2003 Juniper Networks, Inc.
-- Copyright (c) 2004 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-UNI-IF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifEntry, ifStackHigherLayer, ifStackLowerLayer
FROM IF-MIB
juniMibs
FROM Juniper-MIBs;
juniIfMIB MODULE-IDENTITY
LAST-UPDATED "200510112040Z" -- 11-Oct-05 04:40 PM EDT
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"
DESCRIPTION
"The Generic Interfaces MIB for the Juniper Networks
enterprise."
-- Revision History
REVISION "200510112040Z" -- 11-Oct-05 04:40 PM EDT - JUNOSe 7.1
DESCRIPTION
"Added interface type:
plsL2ShimInterface(45) "
REVISION "200307162140Z" -- 16-Jul-03 05:40 PM EDT - JUNOSe 5.1
DESCRIPTION
"Added interface type:
atmActiveSubInterface(257) "
REVISION "200302061557Z" -- 06-Feb-03 10:57 AM EST - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names.
Added interface types:
bridgeInterface(48),
ipsecTransportInterface(49),
ipv6Interface(50),
ipv6TunnelInterface(51),
ipv6Loopback(52),
osi(53),
atmVirtualCircuit(145),
pppLink(256) "
REVISION "200201221652Z" -- 22-Jan-02 11:52 AM EST - JUNOSe 4.0
DESCRIPTION
"Added interface types:
gtpInterface(37),
smdsMajorInterface(38),
smdsSubInterface(39),
ipsecInterface(43),
sgInterface(44),
lacGenInterface(47) "
REVISION "200103281512Z" -- 28-Mar-01 10:12 AM EST - JUNOSe 3.2
DESCRIPTION
"Added interface types:
l2fTunnelInterface(40),
l2fSessionInterface(41),
l2fDestinationInterface(42) "
REVISION "200011222341Z" -- 22-Nov-00 06:41 PM EST - JUNOSe 3.1
DESCRIPTION
"Added interface types:
vlanMajorInterface(34),
vlanSubInterface(35),
cbfInterface(36) "
REVISION "200009291835Z" -- 29-Sep-00 02:35 PM EDT - JUNOSe 3.0
DESCRIPTION
"Added interface types:
multilinkFrameRelayInterface(29),
ipTunnelInterface(30),
serverPortInterface(31),
smdsInterface(32) "
REVISION "200007271545Z" -- 27-Jul-00 11:45 AM EDT - JUNOSe 2.2
DESCRIPTION
"Added interface type:
sonetVTInterface(33) "
REVISION "200005051508Z" -- 05-May-00 11:08 AM EDT - JUNOSe 2.0
DESCRIPTION
"Added interface types:
l2tpSessionInterface(21),
mlPppLinkInterface(22),
l2tpDestinationInterface(24),
mplsMajorInterface(25),
mplsMinorInterface(26),
mlPppNetworkInterface(27),
ethernetSubInterface(28) "
REVISION "199912211518Z" -- 21-Dec-99 10:18 AM EST - JUNOSe 1.3
DESCRIPTION
"Added interface types:
bridgedEthernet(19),
l2TpTunnelInterface(20),
slepInterface(23) "
REVISION "199909031416Z" -- 03-Sep-99 10:16 AM EDT - JUNOSe 1.1
DESCRIPTION
"Added interface types:
pppoe(17),
pppoeSubInterface(18) "
REVISION "9811132019Z" -- 13-Nov-98 03:19 PM EST - JUNOSe 1.0
DESCRIPTION
"Initial version of this MIB module."
::= { juniMibs 3 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- Interface types.
--
JuniIfType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Interface type identification for physical-, link-, and
network-layer interfaces."
SYNTAX INTEGER {
ip(0),
ppp(1),
ds0(2),
ds1(3),
ds3(4),
frameRelay(5),
ethernet(6),
sonet(7),
sonetPath(8),
atm(9),
aal5(10),
atmSubInterface(11),
ft1(12),
hdlc(13),
ipLoopback(14),
ipVirtual(15),
frSubInterface(16),
pppoe(17),
pppoeSubInterface(18),
bridgedEthernet(19),
l2tpTunnelInterface(20),
l2tpSessionInterface(21),
mlPppLinkInterface(22),
slepInterface(23),
l2tpDestinationInterface(24),
mplsMajorInterface(25),
mplsMinorInterface(26),
mlPppNetworkInterface(27),
ethernetSubInterface(28),
multilinkFrameRelayInterface(29),
ipTunnelInterface(30),
serverPortInterface(31),
smdsInterface(32),
sonetVTInterface(33),
vlanMajorInterface(34),
vlanSubInterface(35),
cbfInterface(36),
gtpInterface(37),
smdsMajorInterface(38),
smdsSubInterface(39),
l2fTunnelInterface(40),
l2fSessionInterface(41),
l2fDestinationInterface(42),
ipsecInterface(43),
sgInterface(44),
mplsL2ShimInterface(45),
lacGenInterface(47),
bridgeInterface(48),
ipsecTransportInterface(49),
ipv6Interface(50),
ipv6TunnelInterface(51),
ipv6Loopback(52),
osi(53),
lag(54),
ipTunnelMdt(55),
-- multi-personality and pseudo interfaces
atmVirtualCircuit(145),
pppLink(256),
atmActiveSubInterface(257) }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniInterfaces OBJECT IDENTIFIER ::= { juniIfMIB 1 }
juniIf OBJECT IDENTIFIER ::= { juniInterfaces 1 }
juniIfObjects OBJECT IDENTIFIER ::= { juniIf 1 }
--
-- Generic Interfaces Table
--
juniIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a corresponding entry for each entry found in the
standard Generic Interfaces MIB ifTable/ifXTable. The entries in this
table contain supplementary generic interface characteristics.
Entries in ifTable/ifXTable and in this table are created/deleted as a
consequence of hardware detection, or of management configuration via
standard or enterprise type-specific interface MIBs."
::= { juniIfObjects 1 }
juniIfEntry OBJECT-TYPE
SYNTAX JuniIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing an interface's enterprise-defined generic
interface characteristics."
AUGMENTS { ifEntry }
::= { juniIfTable 1 }
JuniIfEntry ::= SEQUENCE {
juniIfType JuniIfType }
juniIfType OBJECT-TYPE
SYNTAX JuniIfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of this interface."
::= { juniIfEntry 1 }
--
-- Inverse Stack Table
--
-- Similar to IF-MIB ifStackTable, but with inverted indexing
-- order of upper/lower layer interfaces: ifStackTable provides
-- <upper, lower> index ordering, this table provides <lower, upper>
-- index ordering.
--
-- This table facilitates efficient bottom-up GetNext traversal of interface
-- layers, in contrast to the efficient top-down GetNext traversal afforded
-- by IF-MIB ifStackTable.
--
-- This MIB table design is derived from the IETF Internet Draft
-- draft-ietf-ifmib-invstackmib-00.txt, "The Inverted Stack Table Extension
-- to the Interfaces Group MIB", McCloghrie & Hanson, July 16 1998.
-- The table definition below is an interim solution, subject to
-- deprecation in favor of a standard solution should the Internet Draft
-- advance to Proposed Standard status.
--
juniIfInvStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIfInvStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on the relationships between the
multiple sub-layers of network interfaces. In particular, it contains
information on which sub-layers run 'underneath' which other sub-layers,
where each sub-layer corresponds to a conceptual row in the ifTable.
For example, when the sub-layer with ifIndex value x runs underneath the
sub-layer with ifIndex value y, then this table contains:
juniIfInvStackStatus.x.y = active
For each ifIndex value, I, which identifies an active interface, there
are always at least two instantiated rows in this table associated with
I. For one of these rows, I is the value of ifStackHigherLayer; for the
other, I is the value of ifStackLowerLayer. (If I is not involved in
multiplexing, then these are the only two rows associated with I.)
For example, two rows exist even for an interface which has no others
stacked on top or below it:
ifStackStatus.x.0 = active
ifStackStatus.0.x = active
This table contains exactly the same number of rows as the ifStackTable,
but the rows appear in a different order."
::= { juniIfObjects 2 }
juniIfInvStackEntry OBJECT-TYPE
SYNTAX JuniIfInvStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a particular relationship between two sub-layers,
specifying that one sub-layer runs underneath the other sub-layer. Each
sub-layer corresponds to a conceptual row in the ifTable."
INDEX { ifStackLowerLayer,
ifStackHigherLayer }
::= { juniIfInvStackTable 1 }
JuniIfInvStackEntry ::= SEQUENCE {
juniIfInvStackStatus RowStatus }
juniIfInvStackStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the relationship between two sub-layers.
An instance of this object exists for each instance of the ifStackStatus
object, and vice versa. For example, if the variable ifStackStatus.H.L
exists, then the variable juniIfInvStackStatus.L.H must also exist, and
vice versa. In addition, the two variables always have the same value.
However, unlike ifStackStatus, the juniIfInvStackStatus object is NOT
write-able. A network management application wishing to change a
relationship between sub-layers H and L cannot do so by modifying the
value of juniIfInvStackStatus.L.H, but must instead modify the value of
ifStackStatus.H.L. After the ifStackTable is modified, the change will
be reflected in this table."
::= { juniIfInvStackEntry 1 }
--
-- Interfaces Count Table
--
juniIfCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIfCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for each interface type's system wide
interfaces counts."
::= { juniIfObjects 3 }
juniIfCountEntry OBJECT-TYPE
SYNTAX JuniIfCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents system wide total number of interfaces configured
for the particular interface type."
INDEX { juniIfCountIfType }
::= { juniIfCountTable 1 }
JuniIfCountEntry ::= SEQUENCE {
juniIfCountIfType JuniIfType,
juniIfCountNumberOfInterfaces Unsigned32 }
juniIfCountIfType OBJECT-TYPE
SYNTAX JuniIfType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the type of this interface."
::= { juniIfCountEntry 1 }
juniIfCountNumberOfInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents system wide total number of interfaces configured for the
particular interface type."
::= { juniIfCountEntry 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB. Placeholders follow.
-- juniIfTraps OBJECT IDENTIFIER ::= { juniIf 3 }
-- juniIfTrapPrefix OBJECT IDENTIFIER ::= { juniIfTraps 0 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIfConformance OBJECT IDENTIFIER ::= { juniIf 4 }
juniIfCompliances OBJECT IDENTIFIER ::= { juniIfConformance 1 }
juniIfGroups OBJECT IDENTIFIER ::= { juniIfConformance 2 }
--
-- compliance statements
--
juniIfCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Obsolete compliance statement for entities which implement the Juniper
Generic Interfaces MIB."
MODULE -- this module
MANDATORY-GROUPS {
juniIfGroup,
juniIfInvStackGroup }
::= { juniIfCompliances 1 } -- JUNOSe 1.0
juniIfCompliance1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the Juniper
Generic Interfaces MIB."
MODULE -- this module
MANDATORY-GROUPS {
juniIfGroup,
juniIfInvStackGroup,
juniIfCountGroup }
::= { juniIfCompliances 2 } -- JUNOSe 6.0
--
-- units of conformance
--
juniIfGroup OBJECT-GROUP
OBJECTS {
juniIfType }
STATUS current
DESCRIPTION
"A collection of objects for managing generic interfaces in a Juniper
product."
::= { juniIfGroups 1 } -- JUNOSe 1.0
juniIfInvStackGroup OBJECT-GROUP
OBJECTS {
juniIfInvStackStatus }
STATUS current
DESCRIPTION
"A collection of objects providing inverted information on the layering
of MIB-II interfaces."
::= { juniIfGroups 2 } -- JUNOSe 1.0
juniIfCountGroup OBJECT-GROUP
OBJECTS {
juniIfCountNumberOfInterfaces }
STATUS current
DESCRIPTION
"A collection of objects providing interface information on the system
wide count of number of interfaces per interface type."
::= { juniIfGroups 3 } -- JUNOSe 6.0
END