mibs/MIBS/linksys/LINKSYS-TUNNEL-MIB

373 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
LINKSYS-TUNNEL-MIB DEFINITIONS ::= BEGIN
IMPORTS
rnd FROM LINKSYS-MIB
OBJECT-TYPE,Unsigned32, IpAddress,
MODULE-IDENTITY FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
IANAtunnelType FROM IANAifType-MIB
DnsName FROM DNS-SERVER-MIB
tunnelIfEntry FROM TUNNEL-MIB
ifIndex FROM IF-MIB;
rlTunnel MODULE-IDENTITY
LAST-UPDATED "201109120000Z"
ORGANIZATION "Linksys LLC."
CONTACT-INFO
"www.linksys.com/business/support"
DESCRIPTION
"The private MIB module definition for Tunneling."
REVISION "201205210000Z"
DESCRIPTION
"Initial revision."
::= { rnd 122 }
--- Deprecated implementation of ISATAP
--- Deprecated implementation of ISATAP
--- Deprecated implementation of ISATAP
rlTunnelIsatapStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The ISATAP status."
DEFVAL { disable }
::= { rlTunnel 1 }
rlTunnelIsatapRobustness OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 20)
-- UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"specifies how many DNS Querys and Router Solicitations
should be sent to get the corresponding reply."
DEFVAL { 3 }
::= { rlTunnel 2 }
rlTunnelIsatapDnsHostName OBJECT-TYPE
SYNTAX DnsName
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The domain name for ISATAP."
::= { rlTunnel 3 }
rlTunnelIsatapQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (10 .. 3600)
-- UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"specifies the time interval between sending of
DNS Queries before receiving the first reply from the DNS Server."
DEFVAL { 10 }
::= { rlTunnel 4 }
rlTunnelIsatapRSInterval OBJECT-TYPE
SYNTAX Unsigned32 (10 .. 3600)
-- UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"specifies the time interval between sending of Router
Solicitations before receiving the first reply from the ISATAP Router."
DEFVAL { 10 }
::= { rlTunnel 5 }
rlTunnelIsatapMinQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 3600)
-- UNITS "seconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"specifies the minimum time interval between between successive queries
of same advertising ISATAP interface."
DEFVAL { 0 }
::= { rlTunnel 6 }
rlTunnelIsatapMinRSInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 3600)
-- UNITS "seconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"specifies the minimum time between successive solicitations of the
same advertising ISATAP interface."
DEFVAL { 0 }
::= { rlTunnel 7 }
rlTunnelIsatapRouterAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"specifies the IPv4 address of ISATAP Router."
DEFVAL { 0 }
::= { rlTunnel 8 }
rlTunnelIsatapLocalIPv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"specifies the IPv4 address currently used as IPv4 source address
for ISATAP Tunnel."
DEFVAL { 0 }
::= { rlTunnel 9 }
--- End of deprecated implementation of ISATAP
--- End of deprecated implementation of ISATAP
--- End of deprecated implementation of ISATAP
--- rlTunnelGeneral & rlTunnelTypeSpecific
rlTunnelGeneral OBJECT IDENTIFIER ::= { rlTunnel 11 }
--- tunnelIfTable augmentation
rlTunnelIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to tunnelIfTable, and is used to
add/delete tunnel entries to/from that table.
In addition it contains private objects."
::= { rlTunnelGeneral 1 }
rlTunnelIfEntry OBJECT-TYPE
SYNTAX RlTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional configuration parameters for a tunnel interface."
AUGMENTS { tunnelIfEntry }
::= { rlTunnelIfTable 1 }
RlTunnelIfEntry ::= SEQUENCE {
rlTunnelIfEncapsMethod IANAtunnelType,
rlTunnelIfLocalAddressSource INTEGER,
rlTunnelIfLocalAddressInterfaceId Unsigned32,
rlTunnelIfLocalIPv4Address IpAddress,
rlTunnelIfStatus RowStatus
}
rlTunnelIfEncapsMethod OBJECT-TYPE
SYNTAX IANAtunnelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation method used by the tunnel.
This field added since it is read-only in standard MIB."
::= { rlTunnelIfEntry 1 }
rlTunnelIfLocalAddressSource OBJECT-TYPE
SYNTAX INTEGER {
configured(1),
auto(2),
interface(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the method of obtaining Local address for
the tunnel interface.
Configured - configured by user.
Automatic - minimum IP address of the device.
Interface - minimum IP address on user specified interface."
DEFVAL { configured }
::= { rlTunnelIfEntry 2 }
rlTunnelIfLocalAddressInterfaceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface ID, used to determine Local address for tunnel interface
if rlTunnelIfLocalAddressSource set to interface."
DEFVAL { 0 }
::= { rlTunnelIfEntry 3 }
rlTunnelIfLocalIPv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the IPv4 address currently used as IPv4 Local address
for IPv6 over IPv4 Tunnel."
DEFVAL { 0 }
::= { rlTunnelIfEntry 4 }
rlTunnelIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { rlTunnelIfEntry 5 }
--- End of <tunnelIfTable augmentation>
--- rlTunnelTypeSpecific
rlTunnelTypeSpecific OBJECT IDENTIFIER ::= { rlTunnel 12 }
--- rlTunnelIsatap
rlTunnelIsatap OBJECT IDENTIFIER ::= { rlTunnelTypeSpecific 1 }
--- rlTunnelIsatapConfTable
rlTunnelIsatapConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTunnelIsatapConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ISATAP-specific configuration."
::= { rlTunnelIsatap 1 }
rlTunnelIsatapConfEntry OBJECT-TYPE
SYNTAX RlTunnelIsatapConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional configuration parameters for a tunnel interface."
INDEX { ifIndex }
::= { rlTunnelIsatapConfTable 1 }
RlTunnelIsatapConfEntry ::= SEQUENCE {
rlTunnelIsatapConfDnsName OCTET STRING,
rlTunnelIsatapConfRowStatus RowStatus
}
rlTunnelIsatapConfDnsName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS name."
DEFVAL { "ISATAP" }
::= { rlTunnelIsatapConfEntry 1 }
rlTunnelIsatapConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { rlTunnelIsatapConfEntry 2 }
--- End of <rlTunnelIsatapConfTable>
--- rlTunnelIsatapPrlTable
rlTunnelIsatapPrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTunnelIsatapPrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ISATAP-specific configuration."
::= { rlTunnelIsatap 2 }
rlTunnelIsatapPrlEntry OBJECT-TYPE
SYNTAX RlTunnelIsatapPrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional configuration parameters for a tunnel interface."
INDEX { rlTunnelIsatapPrlIfIndex, rlTunnelIsatapPrlPriority }
::= { rlTunnelIsatapPrlTable 1 }
RlTunnelIsatapPrlEntry ::= SEQUENCE {
rlTunnelIsatapPrlIfIndex Unsigned32,
rlTunnelIsatapPrlPriority Unsigned32,
rlTunnelIsatapPrlAddress IpAddress,
rlTunnelIsatapPrlIsActive INTEGER
}
rlTunnelIsatapPrlIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the interface to which this PRL entry belongs."
::= { rlTunnelIsatapPrlEntry 1 }
rlTunnelIsatapPrlPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the entry. Lower value - higher priority."
::= { rlTunnelIsatapPrlEntry 2 }
rlTunnelIsatapPrlAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 address of the potential router."
::= { rlTunnelIsatapPrlEntry 3 }
rlTunnelIsatapPrlIsActive OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the PRL entry is active (meaning it has an up to date RA)."
::= { rlTunnelIsatapPrlEntry 4 }
--- End of rlTunnelIsatapPrlTable
rlTunnelIsatapConfRSInterval OBJECT-TYPE
SYNTAX Unsigned32 (10 .. 3600)
-- UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval between Router Solicitations prior to
receiving the first reply from the ISATAP router."
DEFVAL { 10 }
::= { rlTunnelIsatap 11 }
rlTunnelIsatapConfRobustness OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"After a Router Advertisement was received, Router Solicitation
messages are sent every Lifetime / (1 + Robustness) seconds, where
Lifetime is the Lifetime advertised in the RA."
DEFVAL { 3 }
::= { rlTunnelIsatap 12 }
END