david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/mrv/NBS-CMMC-MIB

8042 lines
276 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
NBS-CMMC-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Counter32, TimeTicks, IpAddress,
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
nbs
FROM NBS-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
NbsCmmcEnumChassisType, NbsCmmcEnumSlotOperationType,
NbsCmmcEnumSlotType, NbsCmmcEnumPortConnector
FROM NBS-CMMCENUM-MIB
;
nbsCmmcMib MODULE-IDENTITY
LAST-UPDATED "201707120000Z" -- July 12, 2017
ORGANIZATION "NBS"
CONTACT-INFO
"For technical support, please contact your service channel"
DESCRIPTION
"MIB for representing NBS CMMC information"
::= { nbs 200 }
-- *******************************************************************
-- NBS-CMMC-MIB Objects Identifier Definition
-- *******************************************************************
nbsCmmcObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"all MIB objects in nbsCmmc MIB."
::= { nbsCmmcMib 1 }
-- *******************************************************************
-- Groups in NBS-CMMC-MIB - all under nbsCmmcObjects
-- *******************************************************************
-- nbsCmmcProducts OBJECT-IDENTITY
-- STATUS current
-- DESCRIPTION "MRV product line"
-- ::= { nbsCmmcMib 1 }
nbsCmmcSystemGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "Objects systemic in scope"
::= { nbsCmmcMib 2 }
nbsCmmcIpSnmpGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "IP and SNMP configuration objects"
::= { nbsCmmcMib 3 }
nbsCmmcTftpGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "TFTP objects"
::= { nbsCmmcMib 4 }
--nbsCmmcIpAccessGrp OBJECT-IDENTITY
-- STATUS current
-- DESCRIPTION "IP Access objects"
-- ::= { nbsCmmcMib 5 }
nbsCmmcChassisGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "Chassis objects"
::= { nbsCmmcMib 6 }
nbsCmmcSlotGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "Slot/Card/Blade objects"
::= { nbsCmmcMib 7 }
nbsCmmcPortGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "Port objects"
::= { nbsCmmcMib 8 }
nbsCmmcNtpGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "NTP objects"
::= { nbsCmmcMib 9 }
nbsCmmcSmtpGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "SMTP objects"
::= { nbsCmmcMib 10 }
nbsCmmcSysLogGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "SysLog objects"
::= { nbsCmmcMib 11 }
nbsCmmcTrapGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION "Trap objects"
::= { nbsCmmcMib 12 }
nbsCmmcTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION "SNMP Traps"
::= { nbsCmmcMib 13 }
nbsCmmcTraps0 OBJECT-IDENTITY
STATUS current
DESCRIPTION "SNMP Traps"
::= { nbsCmmcTraps 0 }
-- ********************************************************************
-- Products Group
-- ********************************************************************
-- nbsCmmcNetMgmt OBJECT-IDENTITY
-- STATUS current
-- DESCRIPTION "NBS Network Managed product"
-- ::= { nbsCmmcProducts 1 }
-- ********************************************************************
-- System Group
-- ********************************************************************
nbsCmmcSysFwDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the System Control Firmware."
::= { nbsCmmcSystemGrp 1 }
nbsCmmcSysFwVers OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The System Control Firmware version in the form
Vmajor.minor."
::= { nbsCmmcSystemGrp 2 }
nbsCmmcSysRestart OBJECT-TYPE
SYNTAX INTEGER {
running (1), -- system is running
coldRestart(2), -- execute a cold/hardware restart
warmRestart(3), -- execute a warm/software restart
upgrRestart(4) -- execute a firmware upgrade restart
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset the system.
Writing a coldRestart(2), causes the SNMP Agent CPU
to be hardware reset, similar to a power-on cycle.
Writing a warmRestart(3), causes only a restart of
the System Control CPU operative software.
Writing a upgrRestart(4), causes a total restart of
the system software, but attempts to leave the hardware
alone."
::= { nbsCmmcSystemGrp 3 }
nbsCmmcSysNumRestarts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of warmRestarts executed by the system, since
the last coldRestart or power-on cycle.
A warmRestart may be initiated by:
- writing a warmRestart value in nbsCmmcSysRestart
- a warmRestart command from the Command Line.
- the SNMP Agent Firmware due to certain conditions."
::= { nbsCmmcSystemGrp 4 }
nbsCmmcSysErrUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last
cold reset/power cycle when a fatal error occurred.
This variable shows the system uptime from the last
cold reset/power on cycle, unless a fatal error oc-
curred."
::= { nbsCmmcSystemGrp 5 }
nbsCmmcSysSetNvramDefaults OBJECT-TYPE
SYNTAX INTEGER {
setDefaults (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing the value setDefaults to this objects will re-
store the defaults in the NVRAM data base. These
values will take effect after a system reset.
For the Linux-based NM family, after restoring defaults,
take care not to commit running changes with the
nbsCmmcSysWriteConfig object. Doing so would undo the
defaults, overwriting them with the running
configuration."
::= { nbsCmmcSystemGrp 6 }
nbsCmmcSysSelftestLevel OBJECT-TYPE
SYNTAX INTEGER {
ststNone(1),
ststShort(2),
ststLong(3),
ststDiagnostics(4)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"NVRAM based level of the system selftest.
The values are :
ststNone - meaning that no selftest will be executed
upon boot-up
ststShort- meaning that a short selftest, of approx
10-20 seconds will be executed upon boot-
up
ststLong - meaning that a long/extensive self-test
will be executed upon boot-up
ststDiagnostics - meaning that upon boot-up the di-
agnostics mode is entered. In this mode
it is possible to interactively select
the test or the group of tests that will
be executed. This value may not be set
through a SNMP SET command.
This object is deprecated."
::= { nbsCmmcSystemGrp 7 }
nbsCmmcSysCurrentTime OBJECT-TYPE
SYNTAX Unsigned32 (2208988800..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current time, expressed as the number of seconds
since 00:00 (midnight) 1 January 1900 GMT. Obtained
via Time Protocol (RFC 868) or set by user.
Not supported value: 0"
::= { nbsCmmcSystemGrp 8 }
nbsCmmcSysCurrentDateTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current time, derived from nbsCmmcSysCurrentTime,
adjusted to Agent's local time (nbsCmmcSysTimeZone),
expressed in the format 'www mm dd hh:mm:ss yyyy'.
If nbsCmmcSysCurrentTime is 0, this value should be
'unknown'."
::= { nbsCmmcSystemGrp 9 }
--
-- the NVRAM settings table
--
nbsCmmcSysNvramTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysNvramEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Copy of Non-Volatile RAM kept in Agent, including
all settings, configurations, and names for all cards
managed by this Agent."
::= { nbsCmmcSystemGrp 10 }
nbsCmmcSysNvramEntry OBJECT-TYPE
SYNTAX NbsCmmcSysNvramEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a block of NVRAM"
INDEX { nbsCmmcSysNvramIndex }
::= { nbsCmmcSysNvramTable 1 }
NbsCmmcSysNvramEntry ::= SEQUENCE {
nbsCmmcSysNvramIndex INTEGER,
nbsCmmcSysNvramBlock OCTET STRING
}
nbsCmmcSysNvramIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NVRAM Block number, starting with 1."
::= { nbsCmmcSysNvramEntry 1 }
nbsCmmcSysNvramBlock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..250))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bytes contained in this block of NVRAM."
::= { nbsCmmcSysNvramEntry 2 }
nbsCmmcSysWriteConfig OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1), -- Write Config is not supported
supported(2), -- Configuration is not saved until write
write(3), -- Write configuration file
copyTempFile(4) -- Copy temp file to startup-config
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to write the configuration file. If
this returns supported, the SNMP Agent requires you to
specifically write the configuration file. Any changes
that are not written out will be lost on next reboot.
Setting copyTempFile(4) will copy the file uploaded via
nbsCmmcSysNvramTable into the non-volatile startup area."
DEFVAL { supported }
::= { nbsCmmcSystemGrp 11 }
nbsCmmcSysUpgrade OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object allows user to initiate a transfer
of firmware from the NM file system to the cards
in selected slots. Before using, user should ensure
the proper files have been loaded (TFTP'd) onto
the NM.
This object has read-write access so it will be more
universally compilable, but is intended only for
writing. For reading, the contents are undefined.
The string should contain a comma-separated list of
slots to be reprogrammed, in the format chassis.slot,
or chassis.* to load all cards.
While the NM is reprogramming the line card, SNMP
communication may be temporarily suspended."
::= { nbsCmmcSystemGrp 12 }
nbsCmmcSysLoginIdleTimeout OBJECT-TYPE
SYNTAX INTEGER (0..400000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control the idle logout timer.
This timer is in minutes. If a user logged into the CLI
has not typed anything for this number of minutes,
the session is automatically closed. Zero means
no automatic timeout."
DEFVAL { 15 }
::= { nbsCmmcSystemGrp 13 }
nbsCmmcSysDiscoveryAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Discovery protocol allows Linux NM cards
to find each other on a single layer 2 network
segment. By default it is enabled."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 14 }
nbsCmmcSysDiscoveryOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of the Discovery
protocol."
::= { nbsCmmcSystemGrp 50 }
--
-- the Discovery host table
--
nbsCmmcSysDiscoveryHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysDiscoveryHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that contains host information found using the L2
Discovery protocol"
::= { nbsCmmcSystemGrp 15 }
nbsCmmcSysDiscoveryHostEntry OBJECT-TYPE
SYNTAX NbsCmmcSysDiscoveryHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a single host found using the L2 Discovery protocol"
INDEX { nbsCmmcSysDiscoveryHostMACAddress }
::= { nbsCmmcSysDiscoveryHostTable 1 }
NbsCmmcSysDiscoveryHostEntry ::= SEQUENCE {
nbsCmmcSysDiscoveryHostMACAddress OCTET STRING,
nbsCmmcSysDiscoveryHostDistance INTEGER,
nbsCmmcSysDiscoveryHostIPAddress IpAddress,
nbsCmmcSysDiscoveryHostAddressType InetAddressType,
nbsCmmcSysDiscoveryHostAddress InetAddress,
nbsCmmcSysDiscoveryHostSourceIfIndex InterfaceIndex
}
nbsCmmcSysDiscoveryHostMACAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of discovered host"
::= { nbsCmmcSysDiscoveryHostEntry 1 }
nbsCmmcSysDiscoveryHostDistance OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How many hops from me is this host?"
DEFVAL { 0 }
::= { nbsCmmcSysDiscoveryHostEntry 2 }
nbsCmmcSysDiscoveryHostIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of discovered host"
DEFVAL { '00000000'h }
::= { nbsCmmcSysDiscoveryHostEntry 3 }
nbsCmmcSysDiscoveryHostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address type, select IPv4 or IPv6"
::= { nbsCmmcSysDiscoveryHostEntry 4 }
nbsCmmcSysDiscoveryHostAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 or IPv6 IP address of discovered host, this replaces nbsCmmcSysDiscoveryHostIPAddress"
::= { nbsCmmcSysDiscoveryHostEntry 5 }
nbsCmmcSysDiscoveryHostSourceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index that the discovered host was found by.
0 for the local host."
::= { nbsCmmcSysDiscoveryHostEntry 6 }
nbsCmmcSysLastSetFailure OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the last SNMP SET was rejected, for example with
SNMP Error: BadValue (SNMP Error 3), this object
should explain why the SET failed.
This string may be empty (size 0) if no explanation
is available.
If there have been no SET requests since boot-up, this
string should be empty (size 0).
In addition to this object, SET errors may also be found
in the nbsCmmcSysRunningLogMessageTable."
::= { nbsCmmcSystemGrp 16 }
nbsCmmcSysTimeProtocol OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time Protocol (RFC 868) allows the managed device to
synchronize its clock with a Time Server.
When read, the agent will report notSupported(1) if this
object is not supported.
When set to enabled(3), it will cause the agent to contact
the nbsCmmcSysTimeServer (if valid) via rdate to obtain
the current time.
disabled(2) is a deprecated, legacy value. Setting this
value will cause a SET error."
DEFVAL { disabled }
::= { nbsCmmcSystemGrp 17 }
nbsCmmcSysTimeServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the Time Server."
::= { nbsCmmcSystemGrp 18 }
nbsCmmcSysTimeServAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address Type of the Time Server."
DEFVAL { unknown }
::= { nbsCmmcSystemGrp 33 }
nbsCmmcSysTimeServAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv4 or IPv6 Address of the Time Server. This entry replaces nbsCmmcSysTimeServer"
::= { nbsCmmcSystemGrp 34 }
--
-- the Firmware table
--
nbsCmmcSysFirmwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysFirmwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that lists firmware images loaded on NM."
::= { nbsCmmcSystemGrp 19 }
nbsCmmcSysFirmwareEntry OBJECT-TYPE
SYNTAX NbsCmmcSysFirmwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description of a firmware image"
INDEX { nbsCmmcSysFirmwareIndex }
::= { nbsCmmcSysFirmwareTable 1 }
NbsCmmcSysFirmwareEntry ::= SEQUENCE {
nbsCmmcSysFirmwareIndex INTEGER,
nbsCmmcSysFirmwareDescr DisplayString,
nbsCmmcSysFirmwareFilename DisplayString,
nbsCmmcSysFirmwareSize INTEGER,
nbsCmmcSysFirmwareMTime INTEGER,
nbsCmmcSysFirmwareVersion DisplayString,
nbsCmmcSysFirmwareDate DisplayString,
nbsCmmcSysFirmwareType INTEGER,
nbsCmmcSysFirmwareIDCs DisplayString,
nbsCmmcSysFirmwareCksum Unsigned32,
nbsCmmcSysFirmwareMd5 OCTET STRING
}
nbsCmmcSysFirmwareIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique Id for this row"
::= { nbsCmmcSysFirmwareEntry 1 }
nbsCmmcSysFirmwareDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of firmware image"
::= { nbsCmmcSysFirmwareEntry 2 }
nbsCmmcSysFirmwareFilename OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The filename of the firmware package. If it is in the
format scheme://host/path, it refers to
nbsCmmcSysFirmwareURL."
::= { nbsCmmcSysFirmwareEntry 3 }
nbsCmmcSysFirmwareSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size (in bytes) of the firmware package file"
::= { nbsCmmcSysFirmwareEntry 4 }
nbsCmmcSysFirmwareMTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last modified time of the firmware package file itself."
::= { nbsCmmcSysFirmwareEntry 5 }
nbsCmmcSysFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the firmware package"
::= { nbsCmmcSysFirmwareEntry 6 }
nbsCmmcSysFirmwareDate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of release of the firmware package in RFC 2822 format"
::= { nbsCmmcSysFirmwareEntry 7 }
nbsCmmcSysFirmwareType OBJECT-TYPE
SYNTAX INTEGER {
invalid (1),
chassis (2),
slot (3),
port (4),
deleted (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What kind of entity this package is for. Valid rev files
have type chassis(2), slot(3), or port(4).
invalid(1) indicates this entry is not a valid rev file.
deleted(5) indicates this entry refers to a file that was deleted
and is no longer in the management card storage area. This entry
may be re-enabled if the identical file is again put on the
management card. This way, indexes do not move around if files are
deleted and subsequently restored. However, deleted slots may be
reused by the system for new files at the system's descretion.
Setting deleted(5) will delete this file permanently from the
management card storage area.
No values other than deleted(5) can be set."
::= { nbsCmmcSysFirmwareEntry 8 }
nbsCmmcSysFirmwareIDCs OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A comma separated list of module versions supported by this
firmware package"
::= { nbsCmmcSysFirmwareEntry 9 }
nbsCmmcSysFirmwareCksum OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The checksum of the metadata. Used to uniquely
identify this package file. Invalid package files
have a zero Cksum.
Not supported value: 0"
::= { nbsCmmcSysFirmwareEntry 10 }
nbsCmmcSysFirmwareMd5 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 checksum of this firmware image. Used to verify
the integrity of this package file."
::= { nbsCmmcSysFirmwareEntry 11 }
--
-- end Firmware table
--
nbsCmmcSysTimeZone OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
gmtMinus1200 (2),
gmtMinus1100 (3),
gmtMinus1000 (4),
gmtMinus0900 (5),
gmtMinus0800 (6),
gmtMinus0700 (7),
gmtMinus0600 (8),
gmtMinus0500 (9),
gmtMinus0400 (10),
gmtMinus0300 (11),
gmtMinus0200 (12),
gmtMinus0100 (13),
gmt (14),
gmtPlus0100 (15),
gmtPlus0200 (16),
gmtPlus0300 (17),
gmtPlus0400 (18),
gmtPlus0500 (19),
gmtPlus0600 (20),
gmtPlus0700 (21),
gmtPlus0800 (22),
gmtPlus0900 (23),
gmtPlus1000 (24),
gmtPlus1100 (25),
gmtPlus1200 (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User-configurable TimeZone or offset from GMT. Should be
used to indicate the time local to the managed device.
If the system supports nbsCmmcSysTimeZoneTableSize and it
is non-zero, this object is the nbsCmmcSysTimeZoneIndex
of nbsCmmcSysTimeZoneTable, which enumerates all the time
zones that this system supports."
DEFVAL { gmt }
::= { nbsCmmcSystemGrp 20 }
nbsCmmcSysSnmpV1 OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
disabled(2), -- SNMPv1 is disabled
enabled (3) -- SNMPv1 is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables SNMPv1 protocol handling."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 21 }
nbsCmmcSysSnmpV2c OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
disabled(2), -- SNMPv2c is disabled
enabled (3) -- SNMPv2c is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables SNMPv2c protocol handling."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 22 }
nbsCmmcSysSnmpV3 OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
disabled(2), -- SNMPv3 is disabled
enabled (3) -- SNMPv3 is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables SNMPv3 protocol handling."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 23 }
nbsCmmcSysStpAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
disabled(2), -- STP is disabled
enabled (3) -- STP is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables STP protocol handling."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 24 }
nbsCmmcSysStpOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
disabled(2),
enabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of the STP protocol."
DEFVAL { enabled }
::= { nbsCmmcSystemGrp 60 }
nbsCmmcSysLockTypes OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, forces the system only to allow writes to slots/ports
that are detected as the same type as the configured type.
Use nbsCmmcSlotClearType to clear the configured type.
When this object is enabled(3) and a module is inserted that
is incompatible with the configured type, Agent should issue
the notification nbsCmmcTrapSlotModuleLocked instead of
nbsCmmcTrapSlotModuleIn.
The notfication nbsCmmcTrapSlotModuleIn should be issued once
the lock has been cleared (see nbsCmmcSlotClearType)."
DEFVAL { disabled }
::= { nbsCmmcSystemGrp 25 }
nbsCmmcSysSerialTerminalType OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of terminal to use for the serial port, e.g. vt100,
xterm, ansi."
DEFVAL { "vt102" }
::= { nbsCmmcSystemGrp 26 }
nbsCmmcSysCrossConnect OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For systems which have chassis/slots supporting cross-connect
functionality, this object is used to reflect the operating
state and clear the entire cross-connect map, including any
independent maps of subordinate chassis and slots.
If there are currently no cross-connect chassis or slots in
this system, the Agent must report notSupported(1).
If the cross-connect mappings can not be cleared via this
object, and/or can only be cleared via the Chassis, Slot, or
PortCrossConnect, the Agent must also report notSupported(1).
Additionally, if this object reports notSupported(1), any
SNMP SET to this object should return SNMP Error 3 (bad
value).
If this object reports operating(2), SNMP Managers are
allowed to set this object to clearing (3), which instructs
the Agent to erase the cross-connect maps of all subordinate
chassis and slots, so no circuits exist in the system."
DEFVAL { operating }
::= { nbsCmmcSystemGrp 27 }
nbsCmmcSysCountersState OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
counting (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset all counters in this device.
If agent does not have this feature, this object should
be notSupported(1).
In order to reset all counters to zero, set this object
to clearing(3).
If this feature is supported, the Agent may return the
status clearing (3) during the interval in which it is
resetting the counters, but otherwise should return the
status counting(2)."
DEFVAL { counting }
::= { nbsCmmcSystemGrp 28 }
nbsCmmcSysSerialBaudRateAdmin OBJECT-TYPE
SYNTAX INTEGER{
b9600 (1), -- baud rate is 9600
b19200 (2), -- baud rate is 19200
b38400 (3), -- baud rate is 38400
b115200 (4) -- baud rate is 115200
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Serial Console Baud Rate when not in SLIP Mode.
Setting this object will change the serial console baud
rate in the BootROM configuration. It will not take
effect until cold or upgrade restart. Setting this object
has no effect on startup-config or the running
configuration."
DEFVAL { b38400 }
::= { nbsCmmcSystemGrp 31 }
nbsCmmcSysSerialBaudRateOper OBJECT-TYPE
SYNTAX INTEGER{
b9600 (1), -- baud rate is 9600
b19200 (2), -- baud rate is 19200
b38400 (3), -- baud rate is 38400
b115200 (4) -- baud rate is 115200
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational Serial Console Baud Rate when not
in SLIP Mode."
DEFVAL { b38400 }
::= { nbsCmmcSystemGrp 32 }
--
-- Out of order objects:
--
-- Addons to Time Serv (see above)
-- nbsCmmcSysTimeServAddressType ::= { nbsCmmcSystemGrp 33 }
-- nbsCmmcSysTimeServAddress ::= { nbsCmmcSystemGrp 34 }
-- Addons to Discovery (see above)
-- nbsCmmcSysDiscoveryOper ::= { nbsCmmcSystemGrp 50 }
-- Addons to Stp (see above)
-- nbsCmmcSysStpOper ::= { nbsCmmcSystemGrp 60 }
--
-- The Proto table (SystemGrp 1001-1002)
--
nbsCmmcSysProtoTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsCmmcSysProtoTable."
::= { nbsCmmcSystemGrp 1001 }
nbsCmmcSysProtoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to report supportable data transmission protocols."
::= { nbsCmmcSystemGrp 1002 }
nbsCmmcSysProtoEntry OBJECT-TYPE
SYNTAX NbsCmmcSysProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes a particular protocol or line rate."
INDEX { nbsCmmcSysProtoIndex }
::= { nbsCmmcSysProtoTable 1 }
NbsCmmcSysProtoEntry ::= SEQUENCE {
nbsCmmcSysProtoIndex Unsigned32,
nbsCmmcSysProtoFamily DisplayString,
nbsCmmcSysProtoRate DisplayString
}
nbsCmmcSysProtoIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol number."
::= { nbsCmmcSysProtoEntry 1 }
nbsCmmcSysProtoFamily OBJECT-TYPE
SYNTAX DisplayString(SIZE(2..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Family of this protocol.
The following family names must be used exactly
for machine-readability:
SONET
T-Carrier
E-Carrier
Ethernet
FibreChannel
DigitalVideo
Other family names may be added as necessary. "
::= { nbsCmmcSysProtoEntry 2 }
nbsCmmcSysProtoRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(2..60))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Speeds or rates associated with this protocol."
::= { nbsCmmcSysProtoEntry 3 }
--
-- the TimeZone table (SystemGrp 1003-1004)
--
nbsCmmcSysTimeZoneTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsCmmcSysTimeZoneTable."
::= { nbsCmmcSystemGrp 1003 }
nbsCmmcSysTimeZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysTimeZoneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to report supportable timezones."
::= { nbsCmmcSystemGrp 1004 }
nbsCmmcSysTimeZoneEntry OBJECT-TYPE
SYNTAX NbsCmmcSysTimeZoneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes a timezone."
INDEX { nbsCmmcSysTimeZoneIndex }
::= { nbsCmmcSysTimeZoneTable 1 }
NbsCmmcSysTimeZoneEntry ::= SEQUENCE {
nbsCmmcSysTimeZoneIndex Unsigned32,
nbsCmmcSysTimeZoneName DisplayString
}
nbsCmmcSysTimeZoneIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TimeZone index corresponding to a
nbsCmmcSysTimeZone setting.
The first entry is reserved for 'notSupported'.
The next 25 entries are reserved for GMT-12
(gmtMinus1200) through GMT+12 (gmtPlus1200) for
compatibility with the older nbsCmmcSysTimeZone
enumeration.
Entries 27 and up are specific to the system."
::= { nbsCmmcSysTimeZoneEntry 1 }
nbsCmmcSysTimeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(2..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of this timezone."
::= { nbsCmmcSysTimeZoneEntry 2 }
--
-- the Loader table (SystemGrp 1010-1011)
--
nbsCmmcSysLoaderTableSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of concurrent loader sessions."
::= { nbsCmmcSystemGrp 1010 }
nbsCmmcSysLoaderTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysLoaderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to manage multiple loader (transfer from NM to blade
or line card) sessions."
::= { nbsCmmcSystemGrp 1011 }
nbsCmmcSysLoaderEntry OBJECT-TYPE
SYNTAX NbsCmmcSysLoaderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes a particular loader session."
INDEX { nbsCmmcSysLoaderIndex }
::= { nbsCmmcSysLoaderTable 1 }
NbsCmmcSysLoaderEntry ::= SEQUENCE {
nbsCmmcSysLoaderIndex INTEGER,
nbsCmmcSysLoaderFileId INTEGER,
nbsCmmcSysLoaderProgress INTEGER,
nbsCmmcSysLoaderStatus INTEGER,
nbsCmmcSysLoaderAbort INTEGER,
nbsCmmcSysLoaderAck INTEGER,
nbsCmmcSysLoaderFilename DisplayString
}
nbsCmmcSysLoaderIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent-determined session number."
::= { nbsCmmcSysLoaderEntry 1 }
nbsCmmcSysLoaderFileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysFirmwareIndex value corresponding to the file
being loaded."
::= { nbsCmmcSysLoaderEntry 2 }
nbsCmmcSysLoaderProgress OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of file transferred so far."
::= { nbsCmmcSysLoaderEntry 3 }
nbsCmmcSysLoaderStatus OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
transferring (2),
completed (3),
aborted (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of this file transfer.
The value idle (1) indicates this loader session is unused.
The value transferring (2) indicates this transfer is
underway.
The value completed (3) indicates this transfer finished
successfully.
The value aborted (4) indicates the transfer was stopped
before completion."
::= { nbsCmmcSysLoaderEntry 4 }
nbsCmmcSysLoaderAbort OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
supported (2),
abort (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows users to prematurely halt this loader
session.
If this loader session can not be aborted, the agent
will report notSupported(1).
If nbsCmmcSysLoaderStatus is transferring(2) and this
feature is supported, the agent will report supported(2).
When a GET on this object returns supported(2), a user may
set this object to abort(3). Doing so will cause the agent
to stop the transfer and change nbsCmmcSysLoaderStatus to
aborted(4). The agent should report the values of
nbsCmmcSysLoaderFileId and nbsCmmcSysLoaderProgress as the
state they were in at the time of the abort.
Please note that aborting a loader session will leave the
destination memory bank with a corrupted, unusable firmware
image. It is important for users to correct this promptly,
by (re)transferring a good and complete firmware image."
DEFVAL { notSupported }
::= { nbsCmmcSysLoaderEntry 5 }
nbsCmmcSysLoaderAck OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
supported (2),
acknowledge (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows users to ACKnowledge the termination of
this loader session.
If nbsCmmcSysLoaderStatus is idle(1) or transferring(2), the
agent will report this object as notSupported(1).
If nbsCmmcSysLoaderStatus is completed(3) or aborted(4), the
agent should report supported(2).
When a GET on this object returns supported(2), a user may
set this object to acknowledge(3). Doing so will cause the
agent to either:
- delete this entire row of the nbsCmmcSysLoaderTable, or
- reset this row to its idle state by clearing both
nbsCmmcSysLoaderFileId and nbsCmmcSysLoaderProgress to
zero, and changing nbsCmmcSysLoaderStatus to idle(1)."
DEFVAL { notSupported }
::= { nbsCmmcSysLoaderEntry 6 }
nbsCmmcSysLoaderFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A copy of nbsCmmcSysFirmwareFilename, for display."
::= { nbsCmmcSysLoaderEntry 7 }
--
-- FirmwareURL objects (SystemGrp 1020-1021)
-- belongs with FirmwareTable, but thats by itself at SystemGrp 19
--
nbsCmmcSysFirmwareURL OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote URL in the form:
scheme://[username[:password]@]IP[:port][/path/]filename
to use for the remote entry in FirmwareTable. When set, the
remote URL will be retrieved and checked for compatability.
If it is a valid firmware file, a row in FirmwareTable will
be instantiated to represent this file. The corresponding
FirmwareFilename will be set to the URL, and FirmwareType
set accordingly.
The file may or not be cached locally if this row is chosen
for a Chassis or SlotFirmwareLoad. If the user has changed
the remote file after FirmwareURL is set, but before a
Chassis or SlotFirmwareLoad is initiated, the results are
undefined.
If the remote file has changed, setting this object again
will 'refresh' its FirmwareTable entry.
If a zero length string is set, the corresponding
FirmwareType in the FirmwareTable row will be changed to
'deleted', and any local cache of the file deleted.
If an invalid URL is set, or the remote file is invalid or
does not exist, the corresponding FirmwareTable row will be
changed to 'deleted'.
If port is omitted, an appropriate port according to the
scheme will be automatically selected
Note that only numeric IPs are supported; there is no
resolver.
If a remote file fetch is in progress, or any Chassis or
SlotFirmwareLoad involving a remote URL is in progress, sets
to this object will be rejected.
This object is not stored in the running configuration. It
is an 'impulse' object."
::= { nbsCmmcSystemGrp 1020 }
nbsCmmcSysFirmwareURLStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
idle (2),
transferring (3),
completed (4),
failed (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the URL fetch process initiated by
a write to SysFirmwareURL. Setting the Chassis or
SlotFirmwareLoad object to the URL index will be rejected
unless this object returns completed(4)."
::= { nbsCmmcSystemGrp 1021 }
--
-- the NVArea table (SystemGrp 3000-3001)
--
nbsCmmcSysNVAreaTableSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-volatile firmware flash image areas system wide"
::= { nbsCmmcSystemGrp 3000 }
nbsCmmcSysNVAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysNVAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that lists firmware images loaded on a chassis, slot, or
port."
::= { nbsCmmcSystemGrp 3001 }
nbsCmmcSysNVAreaEntry OBJECT-TYPE
SYNTAX NbsCmmcSysNVAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description of a firmware image"
INDEX { nbsCmmcSysNVAreaIfIndex, nbsCmmcSysNVAreaBank }
::= { nbsCmmcSysNVAreaTable 1 }
NbsCmmcSysNVAreaEntry ::= SEQUENCE {
nbsCmmcSysNVAreaIfIndex InterfaceIndex,
nbsCmmcSysNVAreaBank INTEGER,
nbsCmmcSysNVAreaStatus INTEGER,
nbsCmmcSysNVAreaDescr DisplayString,
nbsCmmcSysNVAreaVersion DisplayString,
nbsCmmcSysNVAreaCksum Unsigned32
}
nbsCmmcSysNVAreaIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex (100000..9999999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index in the form CCSSPPP"
::= { nbsCmmcSysNVAreaEntry 1 }
nbsCmmcSysNVAreaBank OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of this memory bank / storage area. Numbering must
start from one, and bank numbers must be contiguous."
::= { nbsCmmcSysNVAreaEntry 2 }
nbsCmmcSysNVAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid (1),
primary (2),
backup (3),
erased (4),
busy (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"invalid(1) indicates this entry is not a valid NV area.
primary(2) indicates this entry is the primary NV area. The
next time the hardware is reset, this image will be loaded.
This setting may be changed via nbsCmmcChassisNVAreaAdmin
or nbsCmmcSlotNVAreaAdmin.
backup(3) indicates this entry is the backup NV area. The next time
the hardware is reset, this image will be loaded if the primary
image fails to load. This image is subject to being overwritten if
a new image is downloaded and there are no other banks available.
erased(4) indicates this entry refers to an area that was erased and
is no longer in the NV storage area.
busy(5) indicates this NV area is busy."
::= { nbsCmmcSysNVAreaEntry 3 }
nbsCmmcSysNVAreaDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of firmware image"
::= { nbsCmmcSysNVAreaEntry 4 }
nbsCmmcSysNVAreaVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the firmware package"
::= { nbsCmmcSysNVAreaEntry 5 }
nbsCmmcSysNVAreaCksum OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The checksum of the metadata. Used to uniquely identify this NV
area. Invalid NV areas have a zero Cksum.
Not supported value: 0"
::= { nbsCmmcSysNVAreaEntry 6 }
-- ********************************************************************
-- IpSnmp Group
-- ********************************************************************
nbsCmmcIpCfg OBJECT IDENTIFIER ::= { nbsCmmcIpSnmpGrp 1 }
nbsCmmcSnmpCfg OBJECT IDENTIFIER ::= { nbsCmmcIpSnmpGrp 2 }
nbsCmmcPrvIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the IP Address
for the private in-band access.
This value is stored in the system NVRAM.
The current operational IP Address may be obtained by
accessing the ipAdEntAddr entry in the ipAddrTable,
for ipAdEntIfIndex equal to the private interface
value.
If the system has no current operational IP Address,
meaning that, the access is done out-of-band, then
this value takes effect immediately. In this case the
NetMask and the BcastAddr will be automatically built.
Otherwise it will take effect after a system reset."
::= { nbsCmmcIpCfg 1 }
nbsCmmcPrvNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the subnet mask
for the private in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntNetMask entry in the ipAddrTable,
for ipAdEntIfIndex equal to the private interface
value.
If the system has no current operational IP Address,
meaning that the access is done out-of-band, then this
value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 2 }
nbsCmmcPrvBcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the IP Broad-
cast Address for the private in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained via
the ipAdEntBcastAddr entry in the ipAddrTable for
ipAdEntIfIndex equal to the private interface value.
If the system has no current operational IP Address,
meaning that the access is done out-of-band, then this
value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 3 }
nbsCmmcSysIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the IP Address
for the system.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntAddr entry in the ipAddrTable for
ipAdEntIfIndex equal to the system interface value.
If the system has no current operational IP Address,
meaning that the access is done out-of-band, then this
value takes effect immediately. In this case the
NetMask and the BcastAddr will be automatically built.
Otherwise it will take effect after a system reset."
::= { nbsCmmcIpCfg 4 }
nbsCmmcSysNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the subnet mask
for the system.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntNetMask entry in the ipAddrTable
for ipAdEntIfIndex equal to the system interface value
If the system has no current operational IP Address,
meaning that the access is done out-of-band, then this
value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 5 }
nbsCmmcSysBcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the IP Broadcast
Address for the system.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntBcastAddr entry in the ipAddrTable
for ipAdEntIfIndex equal to the system interface value.
If the system has no current operational IP Address,
meaning that the access is done out-of-band, then this
value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 6 }
nbsCmmcSysObIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the IP Address
for the out-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntAddr entry in the ipAddrTable,
for ipAdEntIfIndex equal to the SLIP interface value.
If the system has no current operational Out-Band IP
Address, meaning that, the access is done in-band,
then this value takes effect immediately. In this
case the NetMask and the BcastAddr will be automa-
tically built.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 7 }
nbsCmmcSysObNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the subnet mask
for the out-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntNetMask entry in the ipAddrTable,
for ipAdEntIfIndex equal to the SLIP interface value.
If the system has no current operational Out-Band IP
Address, meaning that, the access is done in-band,
then this value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 8 }
nbsCmmcSysObBcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The SNMP Agent Administrative value of the IP Broadcast
Address for the in-band access.
This value is stored in the system NVRAM.
The current operational IP Adress may be obtained by
accessing the ipAdEntBcastAddr entry in the ipAddrTable,
for ipAdEntIfIndex equal to the SLIP interface value.
If the system has no current operational Out-Band IP
Address, meaning that, the access is done in-band, then
this value takes effect immediately.
Otherwise it will take effect after a system reset"
::= { nbsCmmcIpCfg 9 }
nbsCmmcSysDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the Default Gateway.
This value is stored in the system NVRAM.
The current operational Default Gateway IP Adress may be
obtained by accessing ipRouteNextHop object of the 0.0.0.0
entry in the ipRouteTable.
If the system has no current operational Default Gateway
IP Address, then this value takes effect immediately.
Otherwise it will take effect after a system reset."
::= { nbsCmmcIpCfg 10 }
nbsCmmcSysAdminBootpState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the NM should
automatically retrieve its IP settings from its local
network using BootP or DHCP.
This setting will be stored in persistent memory, and
thus preserved over system resets and power cycles."
::= { nbsCmmcIpCfg 11 }
nbsCmmcSysRunBootpState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether BootP or DHCP was enabled
when the NM last booted."
::= { nbsCmmcIpCfg 12 }
nbsCmmcSysSerialLineMode OBJECT-TYPE
SYNTAX INTEGER{
adminIf(1),-- serial line is in Terminal Administrative Mode
slipIf (2) -- serial line is in SLIP mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode in which the serial line is used:
by the local Administrative Interface, or as a SLIP line.
Note that setting this object to adminIf(1) value while
in SLIP mode will abort the serial connection between the
SNMP Manager and the device.
Setting this object to slipIf(2) while in Administrative
Interface Mode will abort the local terminal connection."
::= { nbsCmmcIpCfg 13 }
nbsCmmcSysSerialSlipBaudRate OBJECT-TYPE
SYNTAX INTEGER{
b9600 (1), -- baud rate is 9600
b19200 (2), -- baud rate is 19200
b38400 (3) -- baud rate is 38400
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Serial Line Baud Rate when in SLIP Mode.
This value is stored in the system NVRAM as well as in
the SNMP Agent current configuration."
::= { nbsCmmcIpCfg 14 }
nbsCmmcSysArpAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aging time for the ARP table."
::= { nbsCmmcIpCfg 15 }
--
-- Telnet Sessions Description
--
nbsCmmcSysMaxTelnetSessions OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of entries in nbsCmmcSysTelnetTable."
::= { nbsCmmcIpCfg 16 }
nbsCmmcSysTelnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysTelnetEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table describing the Telnet Sessions"
::= { nbsCmmcIpCfg 17 }
nbsCmmcSysTelnetEntry OBJECT-TYPE
SYNTAX NbsCmmcSysTelnetEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Contains the information describing a
Telnet Session"
INDEX { nbsCmmcSysTelnetSessionIndex }
::= { nbsCmmcSysTelnetTable 1 }
NbsCmmcSysTelnetEntry ::= SEQUENCE {
nbsCmmcSysTelnetSessionIndex INTEGER,
nbsCmmcSysTelnetSessionStat INTEGER,
nbsCmmcSysTelnetHost IpAddress,
nbsCmmcSysTelnetHostPort INTEGER,
nbsCmmcSysTelnetLocal IpAddress,
nbsCmmcSysTelnetLocalPort INTEGER,
nbsCmmcSysTelnetSessionId INTEGER,
nbsCmmcSysTelnetConnectTime DisplayString,
nbsCmmcSysTelnetHostAddressType InetAddressType,
nbsCmmcSysTelnetHostAddress InetAddress,
nbsCmmcSysTelnetLocalAddressType InetAddressType,
nbsCmmcSysTelnetLocalAddress InetAddress
}
nbsCmmcSysTelnetSessionIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The index in the Telnet Table for this entry."
::= { nbsCmmcSysTelnetEntry 1 }
nbsCmmcSysTelnetSessionStat OBJECT-TYPE
SYNTAX INTEGER{
connected (1),-- a TELNET session is in process
disconnect (2) -- no TELNET session is in process
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates if there is any TELNET session in
progress."
::= { nbsCmmcSysTelnetEntry 2 }
nbsCmmcSysTelnetHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the remote IP host that connected
to the local device. It is 0.0.0.0 if there is no active
Telnet session"
::= { nbsCmmcSysTelnetEntry 3 }
nbsCmmcSysTelnetHostPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the port number of the remote IP
host."
::= { nbsCmmcSysTelnetEntry 4 }
nbsCmmcSysTelnetLocal OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the IP address of the local device.
It is 0.0.0.0 if there is no active Telnet session"
::= { nbsCmmcSysTelnetEntry 5 }
nbsCmmcSysTelnetLocalPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the local port number."
::= { nbsCmmcSysTelnetEntry 6 }
nbsCmmcSysTelnetSessionId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The internal session identifier for this entry."
::= { nbsCmmcSysTelnetEntry 7 }
nbsCmmcSysTelnetConnectTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the length of time connected."
::= { nbsCmmcSysTelnetEntry 8 }
nbsCmmcSysTelnetHostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the remote host address type."
::= { nbsCmmcSysTelnetEntry 9 }
nbsCmmcSysTelnetHostAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the remote host address, IPv4
or IPv6. This field supercedes nbsCmmcSysTelnetHost"
::= { nbsCmmcSysTelnetEntry 10 }
nbsCmmcSysTelnetLocalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the local host address type."
::= { nbsCmmcSysTelnetEntry 11 }
nbsCmmcSysTelnetLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the local host address, IPv4
or IPv6. This field supercedes nbsCmmcSysTelnetLocal"
::= { nbsCmmcSysTelnetEntry 12 }
--
-- Ping Sessions Description
--
nbsCmmcSysMaxPingSessions OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of Ping Sessions allowed in this
system."
::= { nbsCmmcIpCfg 18 }
nbsCmmcSysPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysPingEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table describing the Ping Sessions"
::= { nbsCmmcIpCfg 19 }
nbsCmmcSysPingEntry OBJECT-TYPE
SYNTAX NbsCmmcSysPingEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Contains the information describing a Ping Session"
INDEX { nbsCmmcSysPingSessionIndex }
::= { nbsCmmcSysPingTable 1 }
NbsCmmcSysPingEntry ::= SEQUENCE {
nbsCmmcSysPingSessionIndex INTEGER,
nbsCmmcSysPingSessionStat INTEGER,
nbsCmmcSysPingAddr IpAddress,
nbsCmmcSysPingNumber Counter32,
nbsCmmcSysPingOwner INTEGER,
nbsCmmcSysPingRequests Counter32,
nbsCmmcSysPingResponses Counter32,
nbsCmmcSysPingAddressType InetAddressType,
nbsCmmcSysPingAddress InetAddress
}
nbsCmmcSysPingSessionIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Index in the Ping Session Table."
::= { nbsCmmcSysPingEntry 1 }
nbsCmmcSysPingSessionStat OBJECT-TYPE
SYNTAX INTEGER{
idlePing (1),
runPing (2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object controls the activity of the PING process
progress.
If GET idlePing(1) shows that the ping process is idle
If SET idlePing(1) stops an active ping process, if
any.
If GET runPing(2) shows an active ping process.
If SET runPing(2) starts an active ping process, if
none active.
This has to be the last SET in order to activate the
PING process"
::= { nbsCmmcSysPingEntry 2 }
nbsCmmcSysPingAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP Address to which the NM device will ping.
Setting this variable initiates the ping sequence.
The default value is the loopback address 127.0.0.1."
DEFVAL { '7F000001'h }
::= { nbsCmmcSysPingEntry 3 }
nbsCmmcSysPingNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The number of ICMP echo packets (pings) to be sent.
The default value is 1."
::= { nbsCmmcSysPingEntry 4 }
nbsCmmcSysPingOwner OBJECT-TYPE
SYNTAX INTEGER {
none (1),
adminInterface(2),
snmpAgent (3),
webManager (4)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"If a Ping Process is active, then the value of this
object shows who activated it: the Administrative
Interface, the SNMP Agent or a Web Based Manager."
::= { nbsCmmcSysPingEntry 5 }
nbsCmmcSysPingRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of ICMP echo request (pings) sent."
::= { nbsCmmcSysPingEntry 6 }
nbsCmmcSysPingResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of ICMP echo response packets received."
::= { nbsCmmcSysPingEntry 7 }
nbsCmmcSysPingAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP Address to which the NM device will ping.
Setting this variable initiates the ping sequence.
The default value is the loopback address 127.0.0.1."
DEFVAL { unknown }
::= { nbsCmmcSysPingEntry 8 }
nbsCmmcSysPingAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP Address to which the NM device will ping.
Setting this variable initiates the ping sequence.
The default value is the loopback address 127.0.0.1.
Supercedes the field nbsCmmcSysPingAddr"
::= { nbsCmmcSysPingEntry 9 }
nbsCmmcSysTelnetServer OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The telnet server ships disabled by default on the NM2.
Not supported means that the telnet server status cannot
be changed from SNMP."
DEFVAL { disabled }
::= { nbsCmmcIpCfg 20 }
nbsCmmcSysSshServer OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ssh server ships enabled by default on the NM2.
Not supported means that the ssh server status cannot
be changed from SNMP."
DEFVAL { enabled }
::= { nbsCmmcIpCfg 21 }
nbsCmmcSysIpAddrOper OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address actually being used by the Agent.
The Agent's IP address may be assigned automatically
by a bootp or DHCP server, or a static IP may be
assigned via the nbsCmmcSysIpAddr object."
::= { nbsCmmcIpCfg 22 }
nbsCmmcSysNetMaskOper OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask actually being used by the Agent.
The Agent's subnet mask may be assigned automatically
by a bootp or DHCP server, or may be
assigned via the nbsCmmcSysNetMask object."
::= { nbsCmmcIpCfg 23 }
nbsCmmcSysBcastAddrOper OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Broadcast address actually being used by the Agent.
The Agent's IP Broadcast address may be assigned automatically
by a bootp or DHCP server, or may be
assigned via the nbsCmmcSysBcastAddr object."
::= { nbsCmmcIpCfg 24 }
nbsCmmcSysDefaultGatewayOper OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Default Gateway actually being used by the Agent.
The Agent's Default Gateway may be assigned automatically
by a bootp or DHCP server, or may be
assigned via the nbsCmmcSysBcastAddr object."
::= { nbsCmmcIpCfg 25 }
nbsCmmcSysWebServer OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The web server ships enabled by default on the NM2.
Not supported means that the web server status cannot
be changed from SNMP."
DEFVAL { disabled }
::= { nbsCmmcIpCfg 26 }
nbsCmmcSysWebPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/UDP/IP port the Agent will listen on for web
(HTTP) traffic when nbsCmmcSysWebServer is enabled(3).
Not supported value: -1"
DEFVAL { 80 }
::= { nbsCmmcIpCfg 27 }
nbsCmmcSysTelnetPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/IP port the Agent will listen on for Telnet
traffic when nbsCmmcSysTelnetServer is enabled(3).
Not supported value: -1"
DEFVAL { 23 }
::= { nbsCmmcIpCfg 28 }
nbsCmmcSysSshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/UDP/IP port the Agent will listen on for Secure
Shell (SSH) traffic if nbsCmmcSysSshServer is enabled(3).
Not supported value: -1"
DEFVAL { 22 }
::= { nbsCmmcIpCfg 29 }
nbsCmmcSysScpServer OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Secure Copy Protocol (SCP) server ships disabled by
default on the NM2. This feature shares nbsCmmcSysSshPort
with SSH, and will not work unless nbsCmmcSysSshServer is
enabled(3).
Not supported means that the scp server status cannot
be changed from SNMP."
DEFVAL { disabled }
::= { nbsCmmcIpCfg 30 }
--
-- SNMP Configuration Parameters
--
nbsCmmcSysWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the write community
string. This value is stored in the system NVRAM.
It will take effect after a system reset.
The object may not be read for obvious security reasons.
A GET request will be answered by a zero length string."
DEFVAL { "private" }
::= { nbsCmmcSnmpCfg 1 }
nbsCmmcSysReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP Agent Administrative value of the read community
string. This value is stored in the system NVRAM.
It will take effect after a system reset"
DEFVAL { "public" }
::= { nbsCmmcSnmpCfg 2 }
--
-- Trap receiver table
--
nbsCmmcSysTrapTblMaxSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size (number of rows) allowed in the trap table"
::= { nbsCmmcSnmpCfg 3 }
nbsCmmcSysTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of managers to whom will the traps generated by the
SNMP agent will be sent.
It represents the current operational table as well as the
NVRAM saved table. The entries in the table are saved over
system resets and power up cycles"
::= { nbsCmmcSnmpCfg 4 }
nbsCmmcSysTrapEntry OBJECT-TYPE
SYNTAX NbsCmmcSysTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the information necessary to generate a trap to be
sent to a particular manager.
The object nbsCmmcSysTrapTblEntStatus, when written is used
to create or delete an entry/row in nbsCmmcSysTrapTable. To
create a new entry a SET PDU with the
nbsCmmcSysTrapTblEntRecipient, nbsCmmcSysTrapTblEntComm and
nbsCmmcSysTrapTblEntStatus objects is required."
INDEX { nbsCmmcSysTrapTblEntIndex }
::= { nbsCmmcSysTrapTable 1 }
NbsCmmcSysTrapEntry ::= SEQUENCE {
nbsCmmcSysTrapTblEntIndex INTEGER,
nbsCmmcSysTrapTblEntStatus INTEGER,
nbsCmmcSysTrapTblEntIpAddr IpAddress,
nbsCmmcSysTrapTblEntComm DisplayString,
nbsCmmcSysTrapTblEntLevel INTEGER,
nbsCmmcSysTrapTblEntPort INTEGER,
nbsCmmcSysTrapTblEntAddressType InetAddressType,
nbsCmmcSysTrapTblEntRecipient InetAddress
}
nbsCmmcSysTrapTblEntIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the entry/row in the trap table in the range
1 to the value of nbsCmmcSysTrapTblMaxSize."
::= { nbsCmmcSysTrapEntry 1 }
nbsCmmcSysTrapTblEntStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1), -- an invalidated entry
active (2) -- an active entry describing a manager
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to get/set the validity of the
information contained by nbsCmmcSysTrapEntry row.
Setting this object to the value invalid(1) has the effect
of deleting the corresponding nbsCmmcSysTrapTable entry.
Deleting and entry has the effect of initializing it to
default values : IpAddr = 0.0.0.0 & Comm = null string.
Setting this object to the value valid(2) entry has the
effect of creating a new row in the nbsCmmcSysTrapTable
object, if an entry with the same nbsCmmcSysTrapTblEntIpAddr
does not exist. If such an entry exists, then a 'badValue'
error will be returned.
The GET operations will receive a value of valid(2) for
existing entries. An invalid(1) value indicates an entry
that was deleted by a previous SET operation."
::= { nbsCmmcSysTrapEntry 2 }
nbsCmmcSysTrapTblEntIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 Address of a manager that is to receive the SNMP
agent traps. This field is now read-only and is superseded
CmmcSysTrapTblEntRecipient"
::= { nbsCmmcSysTrapEntry 3 }
nbsCmmcSysTrapTblEntComm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Community string used by the SNMP agent in the traps
generated to this SNMP manager/receiver."
DEFVAL { "public" }
::= { nbsCmmcSysTrapEntry 4 }
nbsCmmcSysTrapTblEntLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
fatal (2),
error (3),
warning (4),
deprecated5 (5),
deprecated6 (6),
alarm (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event severity level threshold for this SNMP manager.
If the event severity level is at least
nbsCmmcSysTrapTblEntLevel, the SNMP agent will
generate a trap to this SNMP manager/receiver."
DEFVAL { warning }
::= { nbsCmmcSysTrapEntry 5 }
nbsCmmcSysTrapTblEntPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP/IP port on the Manager to which the Agent will send
SNMP traps/notifications.
Not supported value: -1"
DEFVAL { 162 }
::= { nbsCmmcSysTrapEntry 6 }
nbsCmmcSysTrapTblEntAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of nbsCmmcSysTrapTblEntRecipient.
Currently ipv4 and ipv6 are supported."
DEFVAL { unknown }
::= { nbsCmmcSysTrapEntry 7 }
nbsCmmcSysTrapTblEntRecipient OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address (IPv4 or IPv6) or hostname of a manager that is to
receive the SNMP agent generated traps; supersedes
nbsCmmcSysTrapTblEntIpAddr"
::= { nbsCmmcSysTrapEntry 8 }
--
-- Specific traps configuration
--
nbsCmmcSysEnablePowerSupplyTraps OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- power supply trap generation is disabled
enabled (2) -- power supply trap generation is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether powerSupplyAllarmOn
and powerSupplyAllarmOff traps in this MIB should be
generated."
DEFVAL { enabled }
::= { nbsCmmcSnmpCfg 11 }
nbsCmmcSysEnableModuleTraps OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- module trap generation is disabled
enabled (2) -- module trap generation is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether moduleUp and moduleDown
traps in this MIB should be generated."
DEFVAL { enabled }
::= { nbsCmmcSnmpCfg 12 }
nbsCmmcSysEnableBridgeTraps OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- bridge trap generation is disabled
enabled (2) -- bridge trap generation is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether newRoot and topologyChange
traps in the BRIDGE-MIB should be generated."
DEFVAL { enabled }
::= { nbsCmmcSnmpCfg 13 }
nbsCmmcSysEnableIpAccessTraps OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- IP Access trap generation is disabled
enabled (2) -- IP Access trap generation is enabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether IP access traps in this MIB should
be generated."
DEFVAL { enabled }
::= { nbsCmmcSnmpCfg 14 }
nbsCmmcSysSnmpPortAdmin OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP/IP port the Agent will listen on for SNMP traffic
after the next system restart.
Not supported value: -1"
DEFVAL { 161 }
::= { nbsCmmcSnmpCfg 15 }
nbsCmmcSysSnmpPortOper OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP/IP port the Agent is listening on for SNMP traffic
now.
Not supported value: -1"
DEFVAL { 161 }
::= { nbsCmmcSnmpCfg 16 }
-- ******************************************************************
--
-- Objects for the TFTP client/server configuration.
--
-- Implementation of the nbsCmmcTftpGrp is mandatory.
--
-- ********************************************************************
nbsCmmcSysTftpHostIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP Address of the TFTP Server/Client serving
the actual TFTP transfer. A TFTP transfer may mean a
software/microcode/parameter/etc.. download/upload process,
initiated by the SNMP agent, for one of the modules,
including, but not only, the System Control Card.
It is 0.0.0.0, if th TFTP host is undefined."
DEFVAL { '00000000'h }
::= { nbsCmmcTftpGrp 1 }
--
-- the TFTP Session table
--
nbsCmmcTftpMaxSessionNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of parallel TFTP sessions that are
supported by the system"
DEFVAL { 5 }
::= { nbsCmmcTftpGrp 2 }
nbsCmmcTftpSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcTftpSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the active TFTP sessions"
::= { nbsCmmcTftpGrp 3 }
nbsCmmcTftpSessEntry OBJECT-TYPE
SYNTAX NbsCmmcTftpSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular TFTP session"
INDEX { nbsCmmcTftpSessIndex }
::= { nbsCmmcTftpSessTable 1 }
NbsCmmcTftpSessEntry ::= SEQUENCE {
nbsCmmcTftpSessIndex INTEGER,
nbsCmmcTftpSessStatus INTEGER,
nbsCmmcTftpSessHostIp IpAddress,
nbsCmmcTftpSessModuleId INTEGER,
nbsCmmcTftpSessAction INTEGER,
nbsCmmcTftpSessFileName DisplayString,
nbsCmmcTftpSessFileSize INTEGER,
nbsCmmcTftpSessProgress INTEGER,
nbsCmmcTftpSessAddressType InetAddressType,
nbsCmmcTftpSessAddress InetAddress
}
nbsCmmcTftpSessIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the TFTP session (1..nbsCmmcTftpMaxSessionNum)"
::= { nbsCmmcTftpSessEntry 1 }
nbsCmmcTftpSessStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive (1), -- TFTP session is inactive
create (2), -- TFTP session is in creation/activation
underCreation (3), -- TFTP session is in creation/activation
active (4), -- TFTP session is active
transferEnded (5), -- TFTP session has ended - results ready
failed (6) -- TFTP session failed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this TFTP session"
::= { nbsCmmcTftpSessEntry 2 }
nbsCmmcTftpSessHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP Address of the TFTP Host (Server/Client)
serving the TFTP session as a source/destination. An IP
address of 0.0.0.0 signifies that no setup has been done.
Setting the nbsCmmcTftpSessHostIp value will change also the
the default of all the instances of nbsCmmcTftpSessHostIp that
were not specifically initialized by a SET operation."
DEFVAL { '00000000'h }
::= { nbsCmmcTftpSessEntry 3 }
nbsCmmcTftpSessModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Deprecated. Module Id that owns this TFTP session
(whose firmware/microcode/parameters/etc. are transferred"
::= { nbsCmmcTftpSessEntry 4 }
nbsCmmcTftpSessAction OBJECT-TYPE
SYNTAX INTEGER {
inactive (1), -- no transfer underway
downloadNM (2), -- download NM image from a host
uploadNM (3), -- upload NM image to a host
downloadPar (4), -- download configuration parameters from a host
uploadPar (5), -- upload configuration parameters to a host
downloadFile (6), -- download a file from a host
uploadFile (7) -- upload a file to a host
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to initiate a TFTP file transfer.
If nbsCmmcTftpSessStatus is not active (4), the Agent
should report the value inactive (1).
The Manager may initiate a session between the Agent
and the host specified in nbsCmmcTftpSessHostIp by
changing the value of this object.
Setting the value downloadNM (2) tells the Agent to
transfer its firmware image from the host to itself.
Setting the value uploadNM (3) tells the Agent to
transfer its firmware image from itself to the host.
Setting the value downloadPar (4) tells the Agent to
transfer a previous backup of its configuration from
the host to itself. Setting the value uploadPar (5)
tells the Agent to send a backup file of its current
configuration to the host.
For any other type of file, the Manager should set
this value to downloadFile (6) to send a file from the
host to the NM, and uploadFile (7) to transfer a file
from the NM to the host."
::= { nbsCmmcTftpSessEntry 5 }
nbsCmmcTftpSessFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the file to be transferred by this TFTP
session."
::= { nbsCmmcTftpSessEntry 6 }
nbsCmmcTftpSessFileSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The number of bytes in the file. Whichever side has
the file being sent may report the file size here.
Not supported value: -1"
DEFVAL { -1 }
::= { nbsCmmcTftpSessEntry 7 }
nbsCmmcTftpSessProgress OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of bytes successfully transferred in this
session.
Not supported value: -1"
DEFVAL { -1 }
::= { nbsCmmcTftpSessEntry 8 }
nbsCmmcTftpSessAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP Address Type of the TFTP Host (Server/Client)
serving the TFTP session as a source/destination."
DEFVAL { unknown }
::= { nbsCmmcTftpSessEntry 9 }
nbsCmmcTftpSessAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IPv4 or IPv6 Address of the TFTP Host (Server/Client)
serving the TFTP session as a source/destination. Setting the
nbsCmmcTftpSessAddress value will change also the
the default of all the instances of nbsCmmcTftpSessAddress that
were not specifically initialized by a SET operation. This supercedes
nbsCmmcTftpSessHostIp."
::= { nbsCmmcTftpSessEntry 10 }
nbsCmmcSysTftpHostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address type of nbsCmmcSysTftpHostAddress."
DEFVAL { unknown }
::= { nbsCmmcTftpGrp 4 }
nbsCmmcSysTftpHostAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Supercedes the previous value of nbsCmmcSysTftpHostIP;
this is the IP Address of the TFTP Server/Client serving
the actual TFTP transfer. A TFTP transfer may mean a
software/microcode/parameter/etc.. download/upload process,
initiated by the SNMP agent, for one of the modules,
including, but not only, the System Control Card.
It is unknown, if the TFTP host is undefined."
::= { nbsCmmcTftpGrp 5 }
--
-- ******************************************************************
--
-- Objects for the IP Access Configuration have been deprecated
--
-- ********************************************************************
-- ********************************************************************
--
-- Objects for the Chassis group
--
-- ********************************************************************
nbsCmmcChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the Chassis connected"
::= { nbsCmmcChassisGrp 1 }
nbsCmmcChassisEntry OBJECT-TYPE
SYNTAX NbsCmmcChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular Chassis"
INDEX { nbsCmmcChassisIndex }
::= { nbsCmmcChassisTable 1 }
NbsCmmcChassisEntry ::= SEQUENCE {
nbsCmmcChassisIndex INTEGER,
nbsCmmcChassisType NbsCmmcEnumChassisType,
nbsCmmcChassisModel DisplayString,
nbsCmmcChassisObjectId OBJECT IDENTIFIER,
nbsCmmcChassisNumberOfSlots INTEGER,
nbsCmmcChassisHardwareRevision DisplayString,
nbsCmmcChassisPS1Status INTEGER,
nbsCmmcChassisPS2Status INTEGER,
nbsCmmcChassisPS3Status INTEGER,
nbsCmmcChassisPS4Status INTEGER,
nbsCmmcChassisFan1Status INTEGER,
nbsCmmcChassisFan2Status INTEGER,
nbsCmmcChassisFan3Status INTEGER,
nbsCmmcChassisFan4Status INTEGER,
nbsCmmcChassisTemperature INTEGER,
nbsCmmcChassisTemperatureLimit INTEGER,
nbsCmmcChassisTemperatureMin INTEGER,
nbsCmmcChassisSignalStrength INTEGER,
nbsCmmcChassisSignalStrengthMinimum INTEGER,
nbsCmmcChassisEnableAutoReset INTEGER,
nbsCmmcChassisEnableLinkTraps INTEGER,
nbsCmmcChassisEnableChassisTraps INTEGER,
nbsCmmcChassisEnableLoopbackTraps INTEGER,
nbsCmmcChassisEnableSlotChangeTraps INTEGER,
nbsCmmcChassisEnablePortTraps INTEGER,
nbsCmmcChassisResetAllModules INTEGER,
nbsCmmcChassisEnableModuleSpecificTraps INTEGER,
nbsCmmcChassisLoopbackTimeout INTEGER,
nbsCmmcChassisPortInfoBitMap OCTET STRING,
nbsCmmcChassisSlotListBitMap OCTET STRING,
nbsCmmcChassisNumberOfPortsBitMap OCTET STRING,
nbsCmmcChassisName DisplayString,
nbsCmmcChassisEnableLINTraps INTEGER,
nbsCmmcChassisEnablePortChangeTraps INTEGER,
nbsCmmcChassisEnablePortDiagsTraps INTEGER,
nbsCmmcChassisFan5Status INTEGER,
nbsCmmcChassisFan6Status INTEGER,
nbsCmmcChassisFan7Status INTEGER,
nbsCmmcChassisFan8Status INTEGER,
nbsCmmcChassisEnableSwitchoverTraps INTEGER,
nbsCmmcChassisCrossConnect INTEGER,
nbsCmmcChassisNVAreaBanks INTEGER,
nbsCmmcChassisFirmwareCaps OCTET STRING,
nbsCmmcChassisFirmwareLoad OCTET STRING,
nbsCmmcChassisNVAreaAdmin INTEGER,
nbsCmmcChassisNVAreaOper INTEGER,
nbsCmmcChassisLoader INTEGER,
nbsCmmcChassisSerialNum DisplayString,
nbsCmmcChassisFace OCTET STRING,
nbsCmmcChassisCountersState INTEGER,
nbsCmmcChassisPowerStatus INTEGER,
nbsCmmcChassisIfIndex InterfaceIndex
}
nbsCmmcChassisIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Chassis."
::= {nbsCmmcChassisEntry 1 }
nbsCmmcChassisType OBJECT-TYPE
SYNTAX NbsCmmcEnumChassisType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Chassis."
::= {nbsCmmcChassisEntry 2 }
nbsCmmcChassisModel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The model name of the chassis."
::= {nbsCmmcChassisEntry 3 }
nbsCmmcChassisObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object Id of chassis."
::= {nbsCmmcChassisEntry 4 }
nbsCmmcChassisNumberOfSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of slots in the Chassis."
::= {nbsCmmcChassisEntry 5 }
nbsCmmcChassisHardwareRevision OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware revision of the chassis."
::= {nbsCmmcChassisEntry 6 }
nbsCmmcChassisPS1Status OBJECT-TYPE
SYNTAX INTEGER{
notInstalled (1),
acBad (2),
dcBad (3),
acGood (4),
dcGood (5),
notSupported (6),
good (7),
bad (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Power Supply 1."
::= {nbsCmmcChassisEntry 7 }
nbsCmmcChassisPS2Status OBJECT-TYPE
SYNTAX INTEGER{
notInstalled (1),
acBad (2),
dcBad (3),
acGood (4),
dcGood (5),
notSupported (6),
good (7),
bad (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Power Supply 2."
::= {nbsCmmcChassisEntry 8}
nbsCmmcChassisPS3Status OBJECT-TYPE
SYNTAX INTEGER{
notInstalled (1),
acBad (2),
dcBad (3),
acGood (4),
dcGood (5),
notSupported (6),
good (7),
bad (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Power Supply 3."
::= {nbsCmmcChassisEntry 9}
nbsCmmcChassisPS4Status OBJECT-TYPE
SYNTAX INTEGER{
notInstalled (1),
acBad (2),
dcBad (3),
acGood (4),
dcGood (5),
notSupported (6),
good (7),
bad (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Power Supply 4."
::= {nbsCmmcChassisEntry 10}
nbsCmmcChassisFan1Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 1."
::= {nbsCmmcChassisEntry 11}
nbsCmmcChassisFan2Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 2."
::= {nbsCmmcChassisEntry 12}
nbsCmmcChassisFan3Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 3."
::= {nbsCmmcChassisEntry 13}
nbsCmmcChassisFan4Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 4."
::= {nbsCmmcChassisEntry 14}
nbsCmmcChassisTemperature OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature (degrees Celsius) of the Chassis.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= {nbsCmmcChassisEntry 15 }
nbsCmmcChassisTemperatureLimit OBJECT-TYPE
SYNTAX INTEGER ( -100..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum safe temperature (degrees Celsius) of the
Chassis.
Not supported value: 0x80000000"
DEFVAL { 45 }
::= {nbsCmmcChassisEntry 16 }
nbsCmmcChassisTemperatureMin OBJECT-TYPE
SYNTAX INTEGER ( -100..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum safe temperature (degrees Celsius) of the
Chassis.
Not supported value: 0x80000000"
DEFVAL { 5 }
::= {nbsCmmcChassisEntry 17 }
nbsCmmcChassisSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received signal strength."
::= {nbsCmmcChassisEntry 18 }
nbsCmmcChassisSignalStrengthMinimum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The minimum recommended operational received signal
strength."
::= {nbsCmmcChassisEntry 19 }
nbsCmmcChassisEnableAutoReset OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
deprecatedoff (2),
deprecatedon (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Continuously monitor slots for module changes, and reset if
new board installed.
Deprecated.
The response to any GET should be notSupported(1).
Any SET attempt should be rejected with the SNMP error
badValue(3)."
::= {nbsCmmcChassisEntry 20}
nbsCmmcChassisEnableLinkTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report change in link status,
up or down."
DEFVAL { on }
::= {nbsCmmcChassisEntry 21}
nbsCmmcChassisEnableChassisTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report chassis related events."
DEFVAL { on }
::= {nbsCmmcChassisEntry 22}
nbsCmmcChassisEnableLoopbackTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report change in loopback
configuration."
DEFVAL { on }
::= {nbsCmmcChassisEntry 23}
nbsCmmcChassisEnableSlotChangeTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report slot change related events."
DEFVAL { on }
::= {nbsCmmcChassisEntry 24}
nbsCmmcChassisEnablePortTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report port change related events."
DEFVAL { on }
::= {nbsCmmcChassisEntry 25}
nbsCmmcChassisResetAllModules OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
deprecatedOperating (2),
deprecatedReset (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Continuously monitor slots for module changes, and reset
if new board installed.
Deprecated.
The response to any GET should be notSupported(1).
Any SET attempt should be rejected with the SNMP error
badValue(3)."
::= {nbsCmmcChassisEntry 26}
nbsCmmcChassisEnableModuleSpecificTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, send trap to report change in specific cards
conditions"
DEFVAL { on }
::= {nbsCmmcChassisEntry 27}
nbsCmmcChassisLoopbackTimeout OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loopback timeout in minutes, zero indicates forever"
DEFVAL { 0 }
::= {nbsCmmcChassisEntry 28}
nbsCmmcChassisPortInfoBitMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated."
::= {nbsCmmcChassisEntry 29}
nbsCmmcChassisSlotListBitMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated."
::= {nbsCmmcChassisEntry 30}
nbsCmmcChassisNumberOfPortsBitMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated."
::= {nbsCmmcChassisEntry 31}
nbsCmmcChassisName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user assigned name for this chassis"
::= {nbsCmmcChassisEntry 32 }
nbsCmmcChassisEnableLINTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When off(2), suppresses any traps related to Link
Integrity Notification."
DEFVAL { on }
::= {nbsCmmcChassisEntry 33}
nbsCmmcChassisEnablePortChangeTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When off(2), suppresses any traps related to removable
Ports being inserted or removed."
DEFVAL { on }
::= {nbsCmmcChassisEntry 34}
nbsCmmcChassisEnablePortDiagsTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When off(2), suppresses any traps related to digital
diagnostics being outside of safe levels."
DEFVAL { on }
::= {nbsCmmcChassisEntry 35}
nbsCmmcChassisFan5Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 5."
::= {nbsCmmcChassisEntry 36}
nbsCmmcChassisFan6Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 6."
::= {nbsCmmcChassisEntry 37}
nbsCmmcChassisFan7Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 7."
::= {nbsCmmcChassisEntry 38}
nbsCmmcChassisFan8Status OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
bad (2),
good (3),
notInstalled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of Fan 8."
::= {nbsCmmcChassisEntry 39}
nbsCmmcChassisEnableSwitchoverTraps OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, NM can send notifications whenever a
self-healing card switches traffic from an active
port to its redundant standby port.
When off, NM will not send switchover notifications."
DEFVAL { on }
::= {nbsCmmcChassisEntry 40}
nbsCmmcChassisCrossConnect OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For chassis housing cross-connect blades or slots, this
object is used to reflect the operating state and to clear
the entire cross-connect map, including any independent maps
of subordinate slots.
If there are currently no cross-connect blades or slots in
this chassis, the Agent must report notSupported(1).
Additionally, if this object reports notSupported(1), any
SNMP SET to this object should return SNMP Error 3 (bad
value).
The Agent should report operating(2) under normal
circumstances.
If this object reports operating(2), SNMP Managers are allowed
to set this object to clearing (3), which instructs the Agent
to erase all this chassis' cross-connect maps, including any
independent maps of subordinate slots."
DEFVAL { operating }
::= { nbsCmmcChassisEntry 41 }
nbsCmmcChassisNVAreaBanks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of executable images that can be stored
locally on this chassis.
This number does not count any memory banks that are in
a modular subcomponent of this chassis. Please refer to
nbsPartProgNVAreaStart and nbsPartProgNVAreaBanks for that
information.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcChassisEntry 42 }
nbsCmmcChassisFirmwareCaps OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this chassis can
support. This object is mandatory for all chassis.
Bit 0 is reserved.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is appropriate for this
chassis, cleared (0) otherwise.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcChassisEntry 43 }
nbsCmmcChassisFirmwareLoad OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this chassis
has stored in its own NV area. This object is mandatory for
all chassis.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0. Bit 0
indicates whether an executable image is loading.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is stored on this
chassis, cleared (0) if not.
Clearing bits has no effect. To erase an NV area, use the
nbsCmmcSysNVAreaTable.
Users may transfer a file to an NV area by setting the appropriate
file's bit and the loading (MSB) bit to one (1). Adding a file
requires that the NM start a file transfer to this chassis, which
is a lengthy operation. If a transfer session is already active
(nbsCmmcChassisLoader is non-zero), writes to this object will
be rejected.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcChassisEntry 44 }
nbsCmmcChassisNVAreaAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A SET on this object will force the corresponding
nbsCmmcSysNvAreaStatus to primary, set this chassis' other
memory banks to backup, and immediately load and execute
the firmware image contained in the specified memory bank.
A GET on this object will indicate the memory bank of this
chassis that is currently designated as primary.
Not supported value: -1"
DEFVAL { 0 }
::= { nbsCmmcChassisEntry 45 }
nbsCmmcChassisNVAreaOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysNVAreaBank of nbsCmmcSysNVAreaTable corresponding
to the current operationally active firmware image.
0 indicates the current active image is NOT in the NVAreaTable.
Not supported value: -1"
DEFVAL { -1 }
::= { nbsCmmcChassisEntry 46 }
nbsCmmcChassisLoader OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysLoaderIndex of nbsCmmcSysLoaderTable
corresponding to the current loading session.
0 indicates no loading session is active."
DEFVAL { 0 }
::= { nbsCmmcChassisEntry 47 }
nbsCmmcChassisSerialNum OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SerialNumber of this chassis.
If this object is not supported, this string should be empty."
::= { nbsCmmcChassisEntry 48 }
nbsCmmcChassisFace OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..500))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ASCII string containing encoded summary of chassis front
panel status. The encoding uses keywords and associated
allowed values.
Keyword:value pairs delimited by the pipe '|' symbol, and
within a pair, a keyword should be separated from its
associated value by a colon ':' character.
Agent should provide the following info if available. If
unknown, it should be omitted.
Description Keyword Allowed Values
---------------------------------------------------------
Protocol prot ether|slip
Power Supply(X) psx [use nbsCmmcChassisPSxStatus]
Temperature temp [use nbsCmmcChassisTemperature]
Temperature Max tmax [use nbsCmmcChassisTemperatureLimit]
Temperature Min tmin [use nbsCmmcChassisTemperatureMin]
Type type [use nbsCmmcChassisType]
RM/AH Peer Chas rmch [use nbsCmmcChassisIndex]
An example string could be:
|prot:ether|ps1:2|ps2:3|ps3:5|temp:20|
If this object is not supported, this string should be
empty."
::= { nbsCmmcChassisEntry 49 }
nbsCmmcChassisCountersState OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
counting (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to reset MAC counters on all ports in this
Chassis."
DEFVAL { counting }
::= { nbsCmmcChassisEntry 50 }
nbsCmmcChassisPowerStatus OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
sufficient (2),
insufficient (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the total power in the chassis is sufficient or insufficient.
Insufficient means that the chassis won't work in a correct mode."
::= { nbsCmmcChassisEntry 51 }
nbsCmmcChassisIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mib2-like ifIndex of this chassis"
::= { nbsCmmcChassisEntry 52 }
--
--
-- nbsCmmcChassisGrp Scalars
--
--
nbsCmmcChassisCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of chassis currently plugged into the system."
::= { nbsCmmcChassisGrp 2 }
-- ********************************************************************
--
-- Objects for the Slots group
--
-- ********************************************************************
nbsCmmcSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the Slot connected"
::= { nbsCmmcSlotGrp 1 }
nbsCmmcSlotEntry OBJECT-TYPE
SYNTAX NbsCmmcSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular Slot"
INDEX { nbsCmmcSlotChassisIndex, nbsCmmcSlotIndex }
::= { nbsCmmcSlotTable 1 }
NbsCmmcSlotEntry ::= SEQUENCE {
nbsCmmcSlotChassisIndex INTEGER,
nbsCmmcSlotIndex INTEGER,
nbsCmmcSlotType NbsCmmcEnumSlotType,
nbsCmmcSlotModel DisplayString,
nbsCmmcSlotObjectId OBJECT IDENTIFIER,
nbsCmmcSlotNumberOfPorts INTEGER,
nbsCmmcSlotHardwareRevision DisplayString,
nbsCmmcSlotOperationType NbsCmmcEnumSlotOperationType,
nbsCmmcSlotReset INTEGER,
nbsCmmcSlotName DisplayString,
nbsCmmcSlotModuleType INTEGER,
nbsCmmcSlotModuleSlot INTEGER,
nbsCmmcSlotSwConfigurable INTEGER,
nbsCmmcSlotConfiguration OCTET STRING,
nbsCmmcSlotMacAddress OCTET STRING,
nbsCmmcSlotIPAddress IpAddress,
nbsCmmcSlotSubnetMask IpAddress,
nbsCmmcSlotBroadcastAddr IpAddress,
nbsCmmcSlotDefGateway IpAddress,
nbsCmmcSlotHoming INTEGER,
nbsCmmcSlotRedundancyAdmin INTEGER,
nbsCmmcSlotDescr DisplayString,
nbsCmmcSlotUpgradable INTEGER,
nbsCmmcSlotCrossConnect INTEGER,
nbsCmmcSlotClearType INTEGER,
nbsCmmcSlotNVAreaBanks INTEGER,
nbsCmmcSlotFirmwareCaps OCTET STRING,
nbsCmmcSlotFirmwareLoad OCTET STRING,
nbsCmmcSlotNVAreaAdmin INTEGER,
nbsCmmcSlotNVAreaOper INTEGER,
nbsCmmcSlotLoader INTEGER,
nbsCmmcSlotSerialNum DisplayString,
nbsCmmcSlotToggleRate INTEGER,
nbsCmmcSlotTemperature INTEGER,
nbsCmmcSlotCountersState INTEGER,
nbsCmmcSlotRedundancyOper INTEGER,
nbsCmmcSlotIfIndex InterfaceIndex,
nbsCmmcSlotModuleStatus INTEGER,
nbsCmmcSlotManagementPort INTEGER,
nbsCmmcSlotTemperatureLimit INTEGER,
nbsCmmcSlotTemperatureMin INTEGER
}
nbsCmmcSlotChassisIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Chassis to the Slot is connected."
::= { nbsCmmcSlotEntry 1 }
nbsCmmcSlotIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot index."
::= { nbsCmmcSlotEntry 2 }
nbsCmmcSlotType OBJECT-TYPE
SYNTAX NbsCmmcEnumSlotType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The front panel of card in the slot."
::= { nbsCmmcSlotEntry 3 }
nbsCmmcSlotModel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the model of card that is currently in the slot."
::= { nbsCmmcSlotEntry 4 }
nbsCmmcSlotObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the type of card in the slot."
::= { nbsCmmcSlotEntry 5 }
nbsCmmcSlotNumberOfPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports on the card."
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 6 }
nbsCmmcSlotHardwareRevision OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This describes the hardware revision of the card"
::= { nbsCmmcSlotEntry 7 }
nbsCmmcSlotOperationType OBJECT-TYPE
SYNTAX NbsCmmcEnumSlotOperationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Operation of card.."
DEFVAL { other }
::= { nbsCmmcSlotEntry 8 }
nbsCmmcSlotReset OBJECT-TYPE
SYNTAX INTEGER{
notSupported (1),
operating (2),
deprecatedPhy (3),
deprecatedQueue (4),
resetSlot (5),
initSlot (6),
resetWarm (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current reset condition, and possible reset types.
notSupported [1] - reported if feature unavailable.
operating [2] - indicates normal operating status.
phy [3] and queue [4] are deprecated.
resetSlot [5] - cold restart, may impact traffic.
initSlot [6] reverts to default settings; init-module.
resetWarm [7] - soft restart, won't hurt traffic.
The value operating [2] is normally returned by GET,
but during a reset operation, the appropriate reset
value [5, 6, or 7] may be returned."
::= { nbsCmmcSlotEntry 9 }
nbsCmmcSlotName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user assigned name for this slot."
::= { nbsCmmcSlotEntry 10 }
nbsCmmcSlotModuleType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equivalent to nbsCmmcSlotType, except for modules
that occupy more than one slot in a chassis. For such multi-
slot modules, this ModuleType indicates the product this slot
is a part of."
::= { nbsCmmcSlotEntry 11 }
nbsCmmcSlotModuleSlot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the position of this slot within its module.
For one-slot modules this value is always one (1). For
multi-slot modules, this is a positive integer between 1
and the number of slots spanned by this module. The
numbering always begins with the leftmost slot as 1."
DEFVAL { 1 }
::= { nbsCmmcSlotEntry 12 }
nbsCmmcSlotSwConfigurable OBJECT-TYPE
SYNTAX INTEGER{
other (1),
no (2),
yes (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether card is software configurable, usually
based on hardware jumper/dip switch settings. If any changes
to the hardware configuration are allowed, this value will be
yes(3). If this is no(2), SNMP GETs will work but SETs will
fail with an SNMP error. According to RFC 1157, that error
should be noSuchName(2)."
::= { nbsCmmcSlotEntry 13 }
nbsCmmcSlotConfiguration OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..250))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit stream containing current configuration of slot."
::= { nbsCmmcSlotEntry 14 }
nbsCmmcSlotMacAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address of this card.
If this object is not supported, this string should be empty."
::= { nbsCmmcSlotEntry 15 }
nbsCmmcSlotIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Address for the card in this slot."
::= { nbsCmmcSlotEntry 16 }
nbsCmmcSlotSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the SubnetMask for the card in this slot."
::= { nbsCmmcSlotEntry 17 }
nbsCmmcSlotBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Broadcast Address for the card in this slot."
::= { nbsCmmcSlotEntry 18 }
nbsCmmcSlotDefGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the Default Gateway for the card in this slot."
::= { nbsCmmcSlotEntry 19 }
nbsCmmcSlotHoming OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
singleCO (2),
dualCOs (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the cabling topology of
CO / CPE pairs. It must be supported on the
Customer Premises Equipment (CPE) slots.
Any card that does not utilize this object
should report notSupported(1).
If one CO is redundantly cabled to one CPE, the
pair is in singleCO(2) homing.
If two separate CO cards are connected to the
same CPE, the CPE is dually homed. Because
neither CO has contact with the other CO, each
CO should be told the CPE is in a dualCOs(3)
homing configuration.
If the card has a dual homing feature but does
not know its current status, it defaults to
singleCO(2). If that is incorrect, users should
change the value to dualCOs(3) to inform the card
of its network configuration."
DEFVAL { singleCO }
::= { nbsCmmcSlotEntry 20 }
nbsCmmcSlotRedundancyAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to disable redundancy on certain cards
that support the 802.3ah standard, but if supported, the
preferred method is to use the object nbsCmmcPortEnableAdmin
to administratively disable redundant ports that shouldn't
become active.
This object may also be used to change the operating mode of
4 port crossbar cards that can be configured for redundancy.
For cards that do not support this feature, any reads of
this object should get the response notSupported (1). Writes
to this object should be rejected with the SNMP error
badValue (3)."
DEFVAL { disabled }
::= { nbsCmmcSlotEntry 21 }
nbsCmmcSlotDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent description of this slot."
::= { nbsCmmcSlotEntry 22 }
nbsCmmcSlotUpgradable OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
supported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the card in this slot
can now be reprogrammed. It should be used together
with nbsCmmcSysUpgrade.
Cards without reprogrammable firmware should always
report notSupported (1). Reprogrammable cards should
report supported(2) only if the NM has the appropriate
firmware image already loaded and ready to send to
the card."
::= { nbsCmmcSlotEntry 23 }
nbsCmmcSlotCrossConnect OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For slots supporting cross-connect functionality, this
object is used to reflect the operating state and
clear the entire cross-connect map for this slot.
If the slot is not of cross-connect type, the Agent must
report notSupported(1). Additionally, if this object reports
notSupported(1), any SNMP SET to this object should return
SNMP Error 3 (bad value).
The Agent should report operating(2) under normal
circumstances.
If this object reports operating(2), SNMP Managers are allowed to
set this object to clearing (3), which instructs the Agent
to erase the cross-connect map for this slot."
DEFVAL { operating }
::= { nbsCmmcSlotEntry 24 }
nbsCmmcSlotClearType OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
idle (2),
clearType (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When nbsCmmcSysLockTypes is enabled, use this object
to clear the configured slot type. Issue a set command
with a value of clearType(3). A read of this object
will always return idle(2), or notSupported(1) if this
feature is not supported."
DEFVAL { idle }
::= { nbsCmmcSlotEntry 25 }
nbsCmmcSlotNVAreaBanks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of executable images that can be stored
locally on this module.
This number does not count any memory banks that are in
a modular subcomponent of this card. Please refer to
nbsPartProgNVAreaStart and nbsPartProgNVAreaBanks for that
information.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 26 }
nbsCmmcSlotFirmwareCaps OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this module can
support. This object is mandatory for all modules.
Bit 0 is reserved.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is appropriate for this
module, cleared (0) if unavailable.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcSlotEntry 27 }
nbsCmmcSlotFirmwareLoad OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this module
has stored in its own NV area. This object is mandatory for
all modules.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0. Bit 0
indicates whether an executable image is loading.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is stored on this
module, cleared (0) if not.
Clearing bits has no effect. To erase an NV area, use the
nbsCmmcSysNVAreaTable.
Users may transfer a file to an NV area by setting the appropriate
file's bit and the loading (MSB) bit to one (1). Adding a file
requires that the NM start a file transfer to this module, which
is a lengthy operation. If a transfer session is already active
(nbsCmmcSlotLoader is non-zero), writes to this object will be
rejected.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcSlotEntry 28 }
nbsCmmcSlotNVAreaAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A SET on this object will force the corresponding
nbsCmmcSysNvAreaStatus to primary, set this module's other
memory banks to backup, and immediately load and execute
the firmware image contained in the specified memory bank.
A GET on this object will indicate the memory bank of this
module that is currently designated as primary.
Not supported value: -1"
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 29 }
nbsCmmcSlotNVAreaOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysNVAreaBank of nbsCmmcSysNVAreaTable corresponding
to the current operationally active firmware image.
0 indicates the current active image is NOT in the NVAreaTable.
Not supported value: -1"
DEFVAL { -1 }
::= { nbsCmmcSlotEntry 30 }
nbsCmmcSlotLoader OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysLoaderIndex of nbsCmmcSysLoaderTable
corresponding to the current loading session.
0 indicates no loading session is active."
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 31 }
nbsCmmcSlotSerialNum OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SerialNumber of this module.
If this object is not supported, this string should be empty."
::= { nbsCmmcSlotEntry 32 }
nbsCmmcSlotToggleRate OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For crossbar products. Used to indicate the approximate
rate, in microseconds, at which this card should toggle
its transmitters on and off.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 33 }
nbsCmmcSlotTemperature OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature (in degrees celsius) of this slot.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcSlotEntry 34 }
nbsCmmcSlotCountersState OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
counting (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to reset MAC counters on all ports."
DEFVAL { counting }
::= { nbsCmmcSlotEntry 35 }
nbsCmmcSlotRedundancyOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the actual redundancy state of a card.
For cards that do not support this feature, any reads of
this object should get the response notSupported (1)."
DEFVAL { disabled }
::= { nbsCmmcSlotEntry 36 }
nbsCmmcSlotIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mib2-like ifIndex of this slot"
::= { nbsCmmcSlotEntry 37 }
nbsCmmcSlotModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
empty (2),
notReady (3),
ready (4),
standby (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slots that have no card installed should be reported as
empty(2).
Slots where a card has been physically inserted should be
reported as notReady(3) while the card is loading or
warming up, and ready(4) once the card is fully
operational.
Slots that support redundant action may report standby(5)
if they are not yet ready but waiting to go to ready(4) in
case of failover.
When this object is unavailable the Agent will report
the status notSupported (1)."
DEFVAL { empty }
::= { nbsCmmcSlotEntry 38 }
nbsCmmcSlotManagementPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, if set, reports the direct slot management port number.
For cards that do not support this feature the response will be 0."
DEFVAL { 0 }
::= { nbsCmmcSlotEntry 39 }
nbsCmmcSlotTemperatureLimit OBJECT-TYPE
SYNTAX INTEGER ( -100..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000"
DEFVAL { 85 }
::= {nbsCmmcSlotEntry 40 }
nbsCmmcSlotTemperatureMin OBJECT-TYPE
SYNTAX INTEGER ( -100..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000"
DEFVAL { 0 }
::= {nbsCmmcSlotEntry 41 }
-- *******************************************************************
nbsCmmcLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to report status of front panel LEDs"
::= { nbsCmmcSlotGrp 2 }
nbsCmmcLedEntry OBJECT-TYPE
SYNTAX NbsCmmcLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates status of a particular LED"
INDEX { nbsCmmcLedChassisIndex, nbsCmmcLedSlotIndex, nbsCmmcLedIndex }
::= { nbsCmmcLedTable 1 }
NbsCmmcLedEntry ::= SEQUENCE {
nbsCmmcLedChassisIndex INTEGER,
nbsCmmcLedSlotIndex INTEGER,
nbsCmmcLedIndex INTEGER,
nbsCmmcLedColor INTEGER,
nbsCmmcLedDescription DisplayString
}
nbsCmmcLedChassisIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Chassis to the Slot is connected."
::= { nbsCmmcLedEntry 1 }
nbsCmmcLedSlotIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot index."
::= { nbsCmmcLedEntry 2 }
nbsCmmcLedIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the led. Index starts at 1."
::= { nbsCmmcLedEntry 3 }
nbsCmmcLedColor OBJECT-TYPE
SYNTAX INTEGER{
off (1),
green (2),
amber (3),
other (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual/current color of the LED."
::= { nbsCmmcLedEntry 4 }
nbsCmmcLedDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LED's label as on card and short description"
::= { nbsCmmcLedEntry 5 }
--
-- the SlotFace table
--
nbsCmmcSlotFaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSlotFaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the front panel state of each slot"
::= { nbsCmmcSlotGrp 3 }
nbsCmmcSlotFaceEntry OBJECT-TYPE
SYNTAX NbsCmmcSlotFaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular Slot"
INDEX { nbsCmmcSlotFaceChassisIndex, nbsCmmcSlotFaceSlotIndex, nbsCmmcSlotFaceRowIndex }
::= { nbsCmmcSlotFaceTable 1 }
NbsCmmcSlotFaceEntry ::= SEQUENCE {
nbsCmmcSlotFaceChassisIndex INTEGER,
nbsCmmcSlotFaceSlotIndex INTEGER,
nbsCmmcSlotFaceRowIndex INTEGER,
nbsCmmcSlotFaceSummary OCTET STRING
}
nbsCmmcSlotFaceChassisIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Chassis housing this slot."
::= { nbsCmmcSlotFaceEntry 1 }
nbsCmmcSlotFaceSlotIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot index."
::= { nbsCmmcSlotFaceEntry 2 }
nbsCmmcSlotFaceRowIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Row Number"
::= { nbsCmmcSlotFaceEntry 3 }
nbsCmmcSlotFaceSummary OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..500))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ASCII string containing encoded summary of slot front
panel status. The encoding uses keywords and associated
allowed values.
Keyword:value pairs delimited by the pipe '|' symbol, and
within a pair, a keyword should be separated from its
associated value by a colon ':' character.
Agent should provide the following info if available. If
unknown or inapplicable, it should be omitted.
Description Keyword Allowed Values
---------------------------------------------------------
Slot/SNMP Type slid [use nbsCmmcSlotType]
LED ledx [use nbsCmmcLedColor]
PortLink plnkx [use nbsCmmcPortLinked]
PortOperational popx [use nbsCmmcPortOperational]
PortSelectLink pselx actv|stdby
PortConnector pconx [use nbsCmmcPortConnector]
An example string could be:
|slid:436|led1:2|plnk1:2|pop2:2|psel2:actv|pcon4:15|
If this object is not supported, this string should be
empty."
::= { nbsCmmcSlotFaceEntry 4 }
-- ******************************************************************
--
-- Objects for the Ports group
--
-- ********************************************************************
nbsCmmcPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the Port connected"
::= { nbsCmmcPortGrp 1 }
nbsCmmcPortEntry OBJECT-TYPE
SYNTAX NbsCmmcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular Port."
INDEX { nbsCmmcPortChassisIndex ,nbsCmmcPortSlotIndex, nbsCmmcPortIndex }
::= { nbsCmmcPortTable 1 }
NbsCmmcPortEntry ::= SEQUENCE {
nbsCmmcPortChassisIndex INTEGER,
nbsCmmcPortSlotIndex INTEGER,
nbsCmmcPortIndex INTEGER,
nbsCmmcPortType INTEGER,
nbsCmmcPortObjectId OBJECT IDENTIFIER,
nbsCmmcPortLink INTEGER,
nbsCmmcPortAutoNegotiation INTEGER,
nbsCmmcPortDuplex INTEGER,
nbsCmmcPortSpeed INTEGER,
nbsCmmcPortRxActivity INTEGER,
nbsCmmcPortTxActivity INTEGER,
nbsCmmcPortCollisionActivity INTEGER,
nbsCmmcPortLoopback INTEGER,
nbsCmmcPortEnableAdmin INTEGER,
nbsCmmcPortSelectLink INTEGER,
nbsCmmcPortLIN INTEGER,
nbsCmmcPortAging INTEGER,
nbsCmmcPortMaxPacketSize INTEGER,
nbsCmmcPortRemoteLoopback INTEGER,
nbsCmmcPortErrorActivity INTEGER,
nbsCmmcPortName DisplayString,
nbsCmmcPortValue OCTET STRING,
nbsCmmcPortThreshold INTEGER,
nbsCmmcPortThresholdAction INTEGER,
nbsCmmcPortRMChassis INTEGER,
nbsCmmcPortRMSlot INTEGER,
nbsCmmcPortRMPort INTEGER,
nbsCmmcPortSerialNumber DisplayString,
nbsCmmcPortVendorInfo DisplayString,
nbsCmmcPortTemperature INTEGER,
nbsCmmcPortTxPower INTEGER,
nbsCmmcPortRxPower INTEGER,
nbsCmmcPortBiasAmps INTEGER,
nbsCmmcPortSupplyVolts INTEGER,
nbsCmmcPortMedium INTEGER,
nbsCmmcPortConnector NbsCmmcEnumPortConnector,
nbsCmmcPortWavelength INTEGER,
nbsCmmcPortDigitalDiags INTEGER,
nbsCmmcPortZoneIdAdmin INTEGER,
nbsCmmcPortNominalBitRate INTEGER,
nbsCmmcPortModulePort INTEGER,
nbsCmmcPortPartRev DisplayString,
nbsCmmcPortIfIndex INTEGER,
nbsCmmcPortLinked INTEGER,
nbsCmmcPortOperational INTEGER,
nbsCmmcPortZoneChassisAdmin INTEGER,
nbsCmmcPortZoneSlotAdmin INTEGER,
nbsCmmcPortAlarmCause DisplayString,
nbsCmmcPortFlowControl INTEGER,
nbsCmmcPortAutoNegAd OCTET STRING,
nbsCmmcPortAutoNegEditable OCTET STRING,
nbsCmmcPortWavelengthX DisplayString,
nbsCmmcPortZoneIdOper INTEGER,
nbsCmmcPortZoneSlotOper INTEGER,
nbsCmmcPortZoneChassisOper INTEGER,
nbsCmmcPortLinkMatch INTEGER,
nbsCmmcPortMDIPinoutAdmin INTEGER,
nbsCmmcPortMDIPinoutOper INTEGER,
nbsCmmcPortFCRecvAdmin INTEGER,
nbsCmmcPortFCRecvOper INTEGER,
nbsCmmcPortFCSendAdmin INTEGER,
nbsCmmcPortFCSendOper INTEGER,
nbsCmmcPortAutoNegWait INTEGER,
nbsCmmcPortTemperatureLevel INTEGER,
nbsCmmcPortTxPowerLevel INTEGER,
nbsCmmcPortRxPowerLevel INTEGER,
nbsCmmcPortBiasAmpsLevel INTEGER,
nbsCmmcPortSupplyVoltsLevel INTEGER,
nbsCmmcPortAmpGainOper INTEGER,
nbsCmmcPortAmpGainAdmin INTEGER,
nbsCmmcPortAmpOutputPwrAdmin INTEGER,
nbsCmmcPortProtoCapabilities OCTET STRING,
nbsCmmcPortProtoAdmin INTEGER,
nbsCmmcPortProtoOper INTEGER,
nbsCmmcPortPreambleLen INTEGER,
nbsCmmcPortPreferred INTEGER,
nbsCmmcPortCableLen INTEGER,
nbsCmmcPortRedundantTxMode INTEGER,
nbsCmmcPortTermination INTEGER,
nbsCmmcPortDescription DisplayString,
nbsCmmcPortTransmitUnmapped INTEGER,
nbsCmmcPortToggleMode INTEGER,
nbsCmmcPortCrossConnect INTEGER,
nbsCmmcPortZoneIfIndexAdmin INTEGER,
nbsCmmcPortZoneIfIndexOper INTEGER,
nbsCmmcPortEnableOper INTEGER,
nbsCmmcPortMappingType INTEGER,
nbsCmmcPortCountersState INTEGER,
nbsCmmcPortAmpGainMinimum INTEGER,
nbsCmmcPortAmpGainMaximum INTEGER,
nbsCmmcPortAmpGainStepSize INTEGER,
nbsCmmcPortSniffer INTEGER,
nbsCmmcPortExternalLink1 InterfaceIndex,
nbsCmmcPortExternalLink2 InterfaceIndex,
nbsCmmcPortNVAreaBanks INTEGER,
nbsCmmcPortFirmwareCaps OCTET STRING,
nbsCmmcPortFirmwareLoad OCTET STRING,
nbsCmmcPortNVAreaAdmin INTEGER,
nbsCmmcPortNVAreaOper INTEGER,
nbsCmmcPortLoader INTEGER
}
nbsCmmcPortChassisIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Chassis for the Slot to which this
port is connected."
::= { nbsCmmcPortEntry 1 }
nbsCmmcPortSlotIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Slot in the Chassis to which this port is
connected."
::= { nbsCmmcPortEntry 2 }
nbsCmmcPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Port in the Slot in the Chassis to
which this port is connected."
::= { nbsCmmcPortEntry 3 }
nbsCmmcPortType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical type of port. Valid port types are > 1.
The mib representation of pluggable port types are
documented in nbsSffMsaIdentifier from NBS-SFF-MIB,
and have the following PortTypes here:
sfp 125,
gbic 147,
xfp 197,
qsfp 219,
cxp 220,
cfp 221,
qspf28 223,
cfp2 224"
::= { nbsCmmcPortEntry 4 }
nbsCmmcPortObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object Id of the port"
::= { nbsCmmcPortEntry 5 }
nbsCmmcPortLink OBJECT-TYPE
SYNTAX INTEGER {
other (1),
noSignal (2),
signalDetect (3),
link (4),
lock (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link status of the port."
::= { nbsCmmcPortEntry 6 }
nbsCmmcPortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3),
deprecated4 (4),
deprecated5 (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AutoNegotiation status of a port. AutoNegotiation
may affect the port's speed, duplex, and MDI/MDIX.
If this port does not offer this feature, Agent should
report the value notSupported(1).
To disable this feature, set the value to off(2).
To enable this feature, set the value to on(3).
The value autoMDIXOnly(4) is deprecated.
The value custom (5) is deprecated."
DEFVAL { on }
::= { nbsCmmcPortEntry 7 }
nbsCmmcPortDuplex OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
half (2),
full (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duplex mode of the port."
::= { nbsCmmcPortEntry 8 }
nbsCmmcPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
other (1),
spd10Mbps (2),
spd100Mbps (3),
spdGigabit (4),
spd10Gbps (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line speed of the port. This object is superseded
by nbsCmmcPortProtoAdmin and nbsCmmcPortProtoOper."
::= { nbsCmmcPortEntry 9 }
nbsCmmcPortRxActivity OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive status of the port."
::= { nbsCmmcPortEntry 10 }
nbsCmmcPortTxActivity OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit status of the port."
::= { nbsCmmcPortEntry 11 }
nbsCmmcPortCollisionActivity OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The collision status of the port."
::= { nbsCmmcPortEntry 12 }
nbsCmmcPortLoopback OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The loopback status of the port."
DEFVAL { off }
::= { nbsCmmcPortEntry 13 }
nbsCmmcPortEnableAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disable (2),
enable (3),
deprecatedAuto (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively desired operational status of the port. For the
actual operational status, please see the related object
nbsCmmcPortEnableOper.
The value notSupported (1) indicates that the user has no ability to
disable the transceiver.
Users may set this value to disable (2) to turn off the port's
transceiver so that no traffic will flow through this port.
For traffic to be sent and received as normal, this object should be
set to enable (3).
The value auto (4) has been deprecated - older Agents might report
it, and Managers may attempt to set it, but newer agents will
neither report nor accept this value."
DEFVAL { enable }
::= { nbsCmmcPortEntry 14 }
nbsCmmcPortSelectLink OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
standby (2),
active (3),
deprecatedAuto (4),
deprecatedStandbyPreferred(5),
deprecatedActivePreferred(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For ports in self-healing redundant groups, this
object describes this port's redundant state.
The value notSupported(1) indicates this object is
unused for this port.
The value standby(2) indicates that traffic is not
currently routed through this port.
The value active(3) indicates that this port is the
selected channel for passing data traffic.
This object may be used to choose which port in a
redundant group is active. That selection may be
overridden by the system as appropriate, such as
the link going down, or a preferred port coming up.
The values (4) through (6) are deprecated. They will
no longer be reported by the Agent, and attempts to
set them should be rejected with the SNMP error
badValue(3)."
DEFVAL { active }
::= { nbsCmmcPortEntry 15 }
nbsCmmcPortLIN OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Line integrity check on or off."
DEFVAL { disable }
::= { nbsCmmcPortEntry 16 }
nbsCmmcPortAging OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aging on or off."
::= { nbsCmmcPortEntry 17 }
nbsCmmcPortMaxPacketSize OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
max1518 (2),
max1536 (3),
max6k (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum Packet Size Allowed."
::= { nbsCmmcPortEntry 18 }
nbsCmmcPortRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether port should perform Remote Loopback.
When on (3), outbound traffic is returned to the
ingress port. In other words, traffic comes from one
of the module's other ports to get to this one, and
upon arriving here gets sent back to that other port,
from where it continues on back to the originator of
the traffic.
The related object nbsCmmcPortLoopback may be forced
off(2) whenever this object is set to on(3)."
::= { nbsCmmcPortEntry 19 }
nbsCmmcPortErrorActivity OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error activity of the port."
::= { nbsCmmcPortEntry 20 }
nbsCmmcPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user assigned name for this port. This object is also
used for the MIB2 object ifAlias."
::= { nbsCmmcPortEntry 21 }
nbsCmmcPortValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Originally named nbsCmmcPortOpticalPower. Now usage may vary
by card.
For card 162, PortValue measures the Optical Power, or
signal strength.
For card 197, PortValue is a text string displaying
signal strength in decibels.
For cards 211 and 212, PortValue measures the current
bandwidth level. Only one byte is used, and its value can
be notSupported(1), under45Mbps(2), under155Mbps(3),
under622Mbps(4), or under1Gbps(5)"
::= { nbsCmmcPortEntry 22 }
nbsCmmcPortThreshold OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Threshold - usage may be different for each card.
For card 197, this indicates the minimum signal
strength. Value ranges from -5 to -40 decibels.
For card 211, valid values are:
notSupported(1), speed45Mbps(2), speed155Mbps(3),
speed622Mbps(4), speed1Gbps(5)
For card 375, this indicates the rate limit
and is expressed in units of Mbps.
For cards 376 and 379, this indicates the rate
limit and is expressed in units of Kbps.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcPortEntry 23 }
nbsCmmcPortThresholdAction OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action to perform if threshold is crossed. Usage may be
different for each card.
For card 197, the allowable Actions are:
notSupported(1), noAction(2), sendTrap(3)
For cards 211 and 212, valid values are:
notSupported(1), noAction(2), sendTrap(3), disablePort(4),
disablePortAndSendTrap(5),disablePortPeriodically(6),
disablePeriodicallyAndSendTrap(7)
Not supported value: 1"
DEFVAL { 1 }
::= { nbsCmmcPortEntry 24 }
nbsCmmcPortRMChassis OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects indicate which remote port is
externally cabled to this port. This nbsCmmcPortRMChassis
object indicates the remote port's nbsCmmcPortChassisIndex.
If no remote port is known, the nbsCmmcPortRMChassis,
nbsCmmcPortRMSlot, and nbsCmmcPortRMPort objects
should each have the value 0.
If a physical link is discovered by the agent, the
nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects are each set automatically.
If the connection is not discovered automatically,
users may enter the connection by manually setting the
three nbsCmmcPortRM objects"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 25 }
nbsCmmcPortRMSlot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects indicate which remote port is
externally cabled to this port. This nbsCmmcPortRMSlot
object indicates the remote port's nbsCmmcPortSlotIndex.
If no remote port is known, the nbsCmmcPortRMChassis,
nbsCmmcPortRMSlot, and nbsCmmcPortRMPort objects
should each have the value 0.
If a physical link is discovered by the agent, the
nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects are each set automatically.
If the connection is not discovered automatically,
users may enter the connection by manually setting the
three nbsCmmcPortRM objects"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 26 }
nbsCmmcPortRMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects indicate which remote port is
externally cabled to this port. This nbsCmmcPortRMPort
object indicates the remote port's nbsCmmcPortIndex.
If no remote port is known, the nbsCmmcPortRMChassis,
nbsCmmcPortRMSlot, and nbsCmmcPortRMPort objects
should each have the value 0.
If a physical link is discovered by the agent, the
nbsCmmcPortRMChassis, nbsCmmcPortRMSlot, and
nbsCmmcPortRMPort objects are each set automatically.
If the connection is not discovered automatically,
users may enter the connection by manually setting the
three nbsCmmcPortRM objects"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 27 }
nbsCmmcPortSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Serial Number as reported by the component.
Not supported value: 'N/A'"
::= { nbsCmmcPortEntry 28 }
nbsCmmcPortVendorInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor name as reported by the component.
Not supported value: 'N/A'"
::= { nbsCmmcPortEntry 29 }
nbsCmmcPortTemperature OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature (in degrees celsius) of this trans-
ceiver.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcPortEntry 30 }
nbsCmmcPortTxPower OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output power (in milli dBm) of this transmitter.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcPortEntry 31 }
nbsCmmcPortRxPower OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received optical power (in milli dBm) of this
receiver.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcPortEntry 32 }
nbsCmmcPortBiasAmps OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bias current (in microAmps) of this transmitter.
The reserved value -1 indicates that this object is
not supported."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 33 }
nbsCmmcPortSupplyVolts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supply voltage (in milliVolts) of this transmitter.
The reserved value -1 indicates that this object is
not supported."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 34 }
nbsCmmcPortMedium OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
coax (2),
twistedPair (3),
singleMode (4),
multiMode (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of physical communications medium."
::= { nbsCmmcPortEntry 35 }
nbsCmmcPortConnector OBJECT-TYPE
SYNTAX NbsCmmcEnumPortConnector
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of physical connector or jack."
::= { nbsCmmcPortEntry 36 }
nbsCmmcPortWavelength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output wavelength (in nanoMeters) of this
transmitter. The reserved value -1
indicates that this object is not supported.
This object has been superseded by
nbsCmmcPortWavelengthX, which supports floating
point wavelengths, and lists of wavelengths."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 37 }
nbsCmmcPortDigitalDiags OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
diagsOk (2),
diagsWarning (3),
diagsAlarm (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Digital Diagnostics are supported
by this port. If they are supported, this variable
indicates the worst severity level among the measured
diagnostic values."
DEFVAL { diagsOk }
::= { nbsCmmcPortEntry 38 }
nbsCmmcPortZoneIdAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For Fibre Channel products, this will be the Agent-assigned
ZoneId of the zone this port belongs to.
For products which allow dynamic configuration of converter
circuits, this will be the Port number where data for this
converter circuit will be received. If the chassis or slot
is changing, they should be SET first, so ZoneIdAdmin is SET
last. This signals the Agent to reconfigure the crossbar.
The value 0 indicates that this port is not a part of any
Fibre Channel Zone or converter circuit.
In order for two ports to be in the same zone/circuit, each
must be configured to the same PortSpeed or BitRate. If the
Agent receives a request to set CircuitRxPort to a port with
a different bit rate, the Agent will return SNMP error-status
badValue (3)."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 39 }
nbsCmmcPortNominalBitRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This NominalBitRate variable exists for modules
which support configurable speeds that may not be listed in
PortSpeed. Here can be specified the raw bit rate desired,
measured in decimal Mbps.
The Agent may use exactly that rate, or may substitute it with
a compatible rate within an appropriate range of speeds.
If the Agent receives a request for a bitrate it cannot
support, it should return the SNMP errorstatus badValue(3).
For ports whose speed is unknown or not configurable, the
Agent should report this value as -1.
The reserved value 0 specifies that no speed is configured,
and any clocking is bypassed.
The following values are associated with specific protocols:
44 - DS3
51 - OC-1
77 - Telco bus
125 - Fast Ethernet (100 Mbps)
126 - FDDI
155 - OC-3
200 - ESCON
270 - SDI 270Mbps
540 - SDI 540Mbps
622 - OC-12
1063 - 1 Gig FibreChannel
1244 - OC-24
1250 - Gigabit Ethernet
1485 - HDTV
2125 - 2 Gig FibreChannel
2450 - OC-48
2500 - Infiniband
2666 - OC-48+FEC
9953 - 10 Gig Ethernet/WAN
10312 - 10 Gig Ethernet/LAN
10625 - 10 Gig FibreChannel
For ports that support ProtoAdmin 'userDefined', writing
this object will automatically set the ProtoAdmin to
'userDefined'."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 40 }
nbsCmmcPortModulePort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Similar to SlotModuleSlot. Some modules occupy
more than one slot of a chassis. For such products, this
variable will report the port number from the Module
perspective. In contrast, the PortIndex reports the port
number from an individual slot's perspective. For modules
that occupy only one slot, PortModulePort will be equivalent
to PortIndex."
::= { nbsCmmcPortEntry 41 }
nbsCmmcPortPartRev OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number and Revision level as reported by the
component.
Not supported value: 'N/A'"
::= { nbsCmmcPortEntry 42 }
nbsCmmcPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the MIB-II Interface table entry which
represents this port. If there is no corresponding
MIB-II interface entry, this value should be 0."
::= { nbsCmmcPortEntry 43 }
nbsCmmcPortLinked OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Simpler, one bit version of PortLink. The value no(1)
means there is no signal detected or that signal is of
poor quality. The value yes(2) indicates a good
connection."
::= { nbsCmmcPortEntry 44 }
nbsCmmcPortOperational OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port is in a state appropriate
for normal data communications. The value no(1) means
that the port is disabled or in an abnormal state such
as loopback. The value yes(2) indicates that the port
is enabled and usable."
::= { nbsCmmcPortEntry 45 }
nbsCmmcPortZoneChassisAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For crossbar products, this is the Chassis housing the port
shown in nbsCmmcPortZoneId."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 46 }
nbsCmmcPortZoneSlotAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For crossbar products, this is the Slot housing the port
shown in nbsCmmcPortZoneId."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 47 }
nbsCmmcPortAlarmCause OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Pluggable ports with Digital Diagnostics. If there is
currently no alarm condition, this string should be empty.
Otherwise, this should display the most severe actual
alarm condition."
::= { nbsCmmcPortEntry 48 }
nbsCmmcPortFlowControl OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether FlowControl should be used.
If disabled(2), no FlowControl will be initiated by this port.
Any FlowControl requests received will be dropped.
If enabled(3), this port will initiate and observe FlowControl
requests as specified by the objects nbsCmmcPortFCRecvOper
and nbsCmmcPortFCSendOper. Those settings may be changed
through the related nbsCmmcPortFCSendAdmin and
nbsCmmcPortFCRecvAdmin objects.
If notSupported(1), this object is not supported."
DEFVAL { enabled }
::= { nbsCmmcPortEntry 49 }
nbsCmmcPortAutoNegAd OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines which capabilities will be advertised
during auto negotiation. Each capability is represented by
one bit. Set bit to 1 to advertise capability, 0 to deny it.
Capability Bit
---------------------- ---
reserved 0
Flow Control 1
1000 Mbps Full Duplex 2
1000 Mbps Half Duplex 3
100 Mbps Full Duplex 4
100 Mbps Half Duplex 5
10 Mbps Full Duplex 6
10 Mbps Half Duplex 7
OCTET STRING bitmasks count the leftmost bit (MSB) as 0."
::= { nbsCmmcPortEntry 50 }
nbsCmmcPortAutoNegEditable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object determines which AutoNegAd bits may be changed by
the user. Bits set to 1 indicate user may choose whether to
advertise the corresponding capability. Bits are cleared if
user is not allowed to change the corresponding AutoNegAd bit.
Capability Bit
---------------------- ---
reserved 0
Flow Control 1
1000 Mbps Full Duplex 2
1000 Mbps Half Duplex 3
100 Mbps Full Duplex 4
100 Mbps Half Duplex 5
10 Mbps Full Duplex 6
10 Mbps Half Duplex 7
OCTET STRING bitmasks count the leftmost bit (MSB) as 0."
::= { nbsCmmcPortEntry 51 }
nbsCmmcPortWavelengthX OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..150))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects supersedes the nbsCmmcPortWavelength object.
The string format allows both whole numbers as in CWDM, or
floating-point numbers as in DWDM.
If there is more than one wavelength, as with WDM trunks,
each color should be listed, separated by commas.
Not supported value: 'N/A'"
::= { nbsCmmcPortEntry 52 }
nbsCmmcPortZoneIdOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational version of nbsCmmcPortZoneIdAdmin"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 53 }
nbsCmmcPortZoneSlotOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational version of nbsCmmcPortZoneSlotAdmin"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 54 }
nbsCmmcPortZoneChassisOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational version of nbsCmmcPortZoneChassisAdmin"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 55 }
nbsCmmcPortLinkMatch OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Some converter ports that are capable of autonegotiation
(ANEG) may sometimes be between two end ports that would like
to autonegotiate with each other. The Agent can ensure
that both ports in the converter/circuit settle on the same
autonegotiated settings. This feature is called LinkMatch.
ANEG with LinkMatch can sometimes be a lengthy process.
In order to streamline the ANEG process, users may manually
configure the parameters that supporting ports will advertise
during their independent autonegotiations. This involves two
steps - first to change the nbsCmmcPortAutoNegAd object to
reflect the outcome desired, then to set this
nbsCmmcPortLinkMatch object to the value disabled(2).
The default value for this object is enabled(3).
Ports that do not support this feature should return the
value notSupported(1)."
DEFVAL { enabled }
::= { nbsCmmcPortEntry 56 }
nbsCmmcPortMDIPinoutAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
mdi (2),
mdix (3),
autoSense (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Connecting twisted-pair ethernet ports originally required
care in choosing either straight or crossover cables. Later,
many ethernet ports added the feature that they could be
configured to accept either cable pinout. Some ports are
even smart enough to detect, or autosense, the pinout they
should use.
This Administrative object allows users to request the port
adopt a specific pinout, or to have the port autosense it.
The value notSupported(1) indicates that this port
cannot dynamically alter its pinout through this object.
The value mdi(2) is used to connect with a straight cable to
mdix ports such as those found on hubs, switches and routers.
The value mdix(3) is used to connect with a straight cable to
mdi ports such as those found on workstations.
The value autoSense(4) indicates this port should
automatically detect and change to the necessary pinout.
This object has a corresponding Operational value which
reports the actual pinout state. In certain situations, the
Operational value might differ from the Administrative."
DEFVAL { autoSense }
::= { nbsCmmcPortEntry 57 }
nbsCmmcPortMDIPinoutOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
mdi (2),
mdix (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the actual pinout state of an ethernet
port."
DEFVAL { mdi }
::= { nbsCmmcPortEntry 58 }
nbsCmmcPortFCRecvAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
drop (2),
comply (3),
passThru (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify what this port should do
if it receives a flow control request.
This object is ignored when nbsCmmcPortFlowControl is
disabled.
If this object reports notSupported(1), no changes to this
object are allowed.
Setting this object to drop(2) indicates that this port
should ignore requests to control its flow.
Setting this object to comply(3) means this port should
grant flow control requests from the connected port, and
buffer up traffic while the other side catches up.
If this object is set to passthru(4), the port will not
comply with the request, but will relay it along to the next
port.
The corresponding nbsCmmcPortFCRecvOper object indicates
the setting that is actually in effect."
DEFVAL { comply }
::= { nbsCmmcPortEntry 59 }
nbsCmmcPortFCRecvOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
drop (2),
comply (3),
passThru (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates what this port will do with flow
control requests it receives."
DEFVAL { comply }
::= { nbsCmmcPortEntry 60 }
nbsCmmcPortFCSendAdmin OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this port will send flow control
requests when its in danger of dropping incoming packets.
This object is ignored when nbsCmmcPortFlowControl is
disabled.
Setting this object to enabled(3) means this port may send
flow control requests to the other port.
Setting this object to disabled(2) indicates that this port
should drop packets instead of sending flow control requests.
If this object is set to notSupported(1), this object cannot
be changed for this port.
The corresponding nbsCmmcPortFCSendOper object indicates
the setting that is actually in effect."
DEFVAL { enabled }
::= { nbsCmmcPortEntry 61 }
nbsCmmcPortFCSendOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is ignored when nbsCmmcPortFlowControl is
disabled.
This object indicates whether or not this port will send flow
control requests. If it does, the value enabled(3) will be
returned. If it does not, it reports disabled(2). If this
object is not supported, device reports notSupported(1)."
DEFVAL { enabled }
::= { nbsCmmcPortEntry 62 }
nbsCmmcPortAutoNegWait OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the number of seconds a port should autonegotiate [ANEG]
before deciding a link is down.
This object is used by the NM when LIN and ANEG are both
enabled.
If the user knows that a particular end device needs extra
time to complete autonegotiation, he should change this
object to match the end device's needs.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 63 }
nbsCmmcPortTemperatureLevel OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
lowAlarm (2),
lowWarning (3),
ok (4),
highWarning (5),
highAlarm (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this port has a temperature
problem.
If this port does not support SFF-8472 Digital Diagnostics,
this value should be notSupported(1).
If Digital Diagnostics indicate temperature is below the
low Alarm Threshold, this value should be lowAlarm(2).
If Digital Diagnostics indicate temperature is above the
low Alarm Threshold but below the low Warning threshold,
this value should be lowWarning(3).
If Digital Diagnostics indicate this port is within the
recommended operating range, value is ok(4).
If Digital Diagnostics indicate temperature is higher than
the high Warning threshold, but has not crossed the Alarm
threshold, this value should be highWarning (5),.
If Digital Diagnostics indicate this port has crossed the
high Alarm threshold, this value should be highAlarm(6).
The related object nbsCmmcPortTemperature indicates what the
current temperature is."
DEFVAL { ok }
::= { nbsCmmcPortEntry 64 }
nbsCmmcPortTxPowerLevel OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
lowAlarm (2),
lowWarning (3),
ok (4),
highWarning (5),
highAlarm (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this port has a problem
with its transmitter power.
If this port does not support SFF-8472 Digital Diagnostics,
this value should be notSupported(1).
If Digital Diagnostics indicate TxPower is below the
low Alarm Threshold, this value should be lowAlarm(2).
If Digital Diagnostics indicate TxPower is above the
low Alarm Threshold but below the low Warning threshold,
this value should be lowWarning(3).
If Digital Diagnostics indicate this port is within the
recommended operating range, value is ok(4).
If Digital Diagnostics indicate TxPower is higher than
the high Warning threshold, but has not crossed the Alarm
threshold, this value should be highWarning (5),.
If Digital Diagnostics indicate this port has crossed the
high Alarm threshold, this value should be highAlarm(6).
The related object nbsCmmcPortTxPower indicates what the
current TxPower is."
DEFVAL { ok }
::= { nbsCmmcPortEntry 65 }
nbsCmmcPortRxPowerLevel OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
lowAlarm (2),
lowWarning (3),
ok (4),
highWarning (5),
highAlarm (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this port has a problem
with the power of its received signal.
If this port does not support SFF-8472 Digital Diagnostics,
this value should be notSupported(1).
If Digital Diagnostics indicate RxPower is below the
low Alarm Threshold, this value should be lowAlarm(2).
If Digital Diagnostics indicate RxPower is above the
low Alarm Threshold but below the low Warning threshold,
this value should be lowWarning(3).
If Digital Diagnostics indicate this port is within the
recommended operating range, value is ok(4).
If Digital Diagnostics indicate RxPower is higher than
the high Warning threshold, but has not crossed the Alarm
threshold, this value should be highWarning (5),.
If Digital Diagnostics indicate this port has crossed the
high Alarm threshold, this value should be highAlarm(6).
The related object nbsCmmcPortRxPower indicates what the
current RxPower is."
DEFVAL { ok }
::= { nbsCmmcPortEntry 66 }
nbsCmmcPortBiasAmpsLevel OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
lowAlarm (2),
lowWarning (3),
ok (4),
highWarning (5),
highAlarm (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this port has a problem
with the electric current going through the port.
If this port does not support SFF-8472 Digital Diagnostics,
this value should be notSupported(1).
If Digital Diagnostics indicate BiasAmps is below the
low Alarm Threshold, this value should be lowAlarm(2).
If Digital Diagnostics indicate BiasAmps is above the
low Alarm Threshold but below the low Warning threshold,
this value should be lowWarning(3).
If Digital Diagnostics indicate this port is within the
recommended operating range, value is ok(4).
If Digital Diagnostics indicate BiasAmps is higher than
the high Warning threshold, but has not crossed the Alarm
threshold, this value should be highWarning (5),.
If Digital Diagnostics indicate this port has crossed the
high Alarm threshold, this value should be highAlarm(6).
The related object nbsCmmcPortBiasAmps indicates what the
current amperage is."
DEFVAL { ok }
::= { nbsCmmcPortEntry 67 }
nbsCmmcPortSupplyVoltsLevel OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
lowAlarm (2),
lowWarning (3),
ok (4),
highWarning (5),
highAlarm (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this port has a problem
with the electric voltage across the port.
If this port does not support SFF-8472 Digital Diagnostics,
this value should be notSupported(1).
If Digital Diagnostics indicate SupplyVolts is below the
low Alarm Threshold, this value should be lowAlarm(2).
If Digital Diagnostics indicate SupplyVolts is above the
low Alarm Threshold but below the low Warning threshold,
this value should be lowWarning(3).
If Digital Diagnostics indicate this port is within the
recommended operating range, value is ok(4).
If Digital Diagnostics indicate SupplyVolts is higher than
the high Warning threshold, but has not crossed the Alarm
threshold, this value should be highWarning (5),.
If Digital Diagnostics indicate this port has crossed the
high Alarm threshold, this value should be highAlarm(6).
The related object nbsCmmcPortSupplyVolts indicates what the
current supply voltage is."
DEFVAL { ok }
::= { nbsCmmcPortEntry 68 }
nbsCmmcPortAmpGainOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current actual operational gain (in milli dB) of an
optical amplifier.
For nbsCmmcSlotType 503, this object only applies to AGC mode.
The reserved value -1 indicates that this object is
not supported."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 69}
nbsCmmcPortAmpGainAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user configured administrative gain (in milli dB) of an
optical amplifier.
For nbsCmmcSlotType 503, this object only applies to AGC mode.
The reserved value -1 indicates that this object is
not supported."
DEFVAL { -1 }
::= { nbsCmmcPortEntry 70 }
nbsCmmcPortAmpOutputPwrAdmin OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user configured desired output power (in milli dBm) of
an optical amplifier.
For nbsCmmcSlotType 503, this object only applies to APC mode.
Not supported value: 0x80000000"
DEFVAL { -2147483648 }
::= { nbsCmmcPortEntry 71 }
nbsCmmcPortProtoCapabilities OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitmask indicates which protocols this port can support.
This object is mandatory for all ports in systems where the
nbsCmmcSysProtoTable is supported.
Bit 0 is reserved.
Subsequent bits refer to the nbsCmmcSysProtoTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that protocol is available for
this port, cleared (0) if unavailable.
Bit 1 always indicates 'custom' aka 'userDefined' is supported.
Bit 2 always indicates 'bypass' aka 'transparent' is supported.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.
A zero length OCTET STRING indicates that this object is not
supported."
::= { nbsCmmcPortEntry 72 }
nbsCmmcPortProtoAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The nbsCmmcSysProtoIndex of nbsCmmcSysProtoTable corresponding
to the administratively desired family and rate of this port's
protocol.
The value 0 is reserved for 'notSupported'
The value 1 is reserved for 'custom' aka 'userDefined'.
If a PortNominalBitRate set is received, PortProtoAdmin
will automatically change to 1.
The value 2 is reserved for 'bypass' aka 'transparent'.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 73 }
nbsCmmcPortProtoOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysProtoIndex of nbsCmmcSysProtoTable corresponding
to the current operational family and rate of this port's
protocol.
The value 1 is reserved for 'custom' aka 'userDefined'.
If a PortNominalBitRate set is received, PortProtoAdmin
will automatically change to 1.
The value 2 is reserved for 'bypass' aka 'transparent'.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 74 }
nbsCmmcPortPreambleLen OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
standard (2),
variable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the length of the transmitted ethernet preamble for
every frame on this port.
The value standard(2) indicates the standard 8 byte
ethernet preamble should always be sent.
The value variable(3) indicates longer preambles may
be sent.
The value notSupported(1) indicates preamble length is
not configurable or not applicable for this port."
DEFVAL { standard }
::= { nbsCmmcPortEntry 75 }
nbsCmmcPortPreferred OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Among a group of ports this object per port says whether this
ports is preferred or not. A preferred port in a redundant
group (usually a pair of ports) will always be the active
link if it has link, regardless of the link state of other
ports in its group.
Only one port in a redundant group may be preferred. If other
ports in the same redundant group are already designated
yes(1), the system should automatically set them to no(2).
When a port is selected as preferred port, its redundant
group is assumed to be in revertive mode.
When no port is selected as preferred port, its redundant
group is assumed to be in non-revertive (a.k.a. sticky) mode.
Once selected, a port's actual active state be read via
the SelectLink object.
Use caution in designating Preferred ports, because on
flaky/intermittent lines, this may result in excessive
failovers.
If read as notSupported(1), this port either does not belong
to a redundant group, or its redundant group is always in
non-revertive (a.k.a. sticky) mode."
DEFVAL { notSupported }
::= { nbsCmmcPortEntry 76 }
nbsCmmcPortCableLen OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
len133 (2), -- 0 to 133 feet
len266 (3), -- 134 to 266 feet
len399 (4), -- 267 to 399 feet
len533 (5), -- 400 to 533 feet
len655 (6), -- 534 to 655 feet
shortHaul (7),
longHaul (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the expected maximum
cable length for copper DSX ports such as T1, E1, and T3.
If a port does not use this feature, this object should
be notSupported (1).
T1 T-carrier ports should specify a max cable length between
0 to 655 feet using values len133 (2) through len655 (6).
T3 T-carrier, E1/E3 E-carrier and STS-1 SONET ports should use
either the value shortHaul (7) or longHaul (8)."
DEFVAL { notSupported }
::= { nbsCmmcPortEntry 77 }
nbsCmmcPortRedundantTxMode OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
oneColonOne (2),
onePlusOne (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not a redundant port's
transmitter should be shut down when that port is on
standby.
If both redundant ports are connected (via a Y cable) to
the same remote port, use the setting oneColonOne (2).
This 1:1 configuration will turn off the standby
transmitter so it will not interfere with the active port.
If each redundant port is connected to its own remote
port, use the setting onePlusOne(3). 1+1 leaves both
transmitters on, so the remote site can read its link
status.
Any changes to this object are automatically applied to
this port's redundant pair."
DEFVAL { oneColonOne }
::= { nbsCmmcPortEntry 78 }
nbsCmmcPortTermination OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disable (2),
ohm120 (3),
ohm100 (4),
ohm75 (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative setting for the line termination impedance
of the port.
The value disable (2) indicates that the line is to be
terminated elsewhere."
DEFVAL { disable }
::= { nbsCmmcPortEntry 79 }
nbsCmmcPortDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..240))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A functional description of this port. May include port's
role in the module, connector type, and other relevant info."
::= { nbsCmmcPortEntry 80 }
nbsCmmcPortTransmitUnmapped OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for crossbar products. It allows the user
to choose whether this port's transmitter should be enabled
or disabled when this port is not mapped to another crossbar
port.
Setting the value disabled(2) will cause the transmitter to
be disabled while the port is unmapped.
Setting the value enabled(3) will cause this port to
transmit even if unmappped, unless this entire port is
disabled via the nbsCmmcPortEnableAdmin object.
The agent will report this object as notSupported(1) if the
feature is unavailable for this port."
DEFVAL { disabled }
::= { nbsCmmcPortEntry 81 }
nbsCmmcPortToggleMode OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to the user to toggle the transmitter of
this port.
The value enabled(3) causes the transmitter to blink on and
off at the rate specified in nbsCmmcSlotToggleRate.
The value disabled(2) disables the toggle feature.
The value notSupported(1) indicates that this port does not
support the toggle feature."
DEFVAL { disabled }
::= { nbsCmmcPortEntry 82 }
nbsCmmcPortCrossConnect OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For ports supporting cross-connect functionality, this
object is used to reflect the operating state and clear this
port from all cross-connect maps.
If the port is not of cross-connect type, the Agent must
report notSupported(1). Additionally, if this object reports
notSupported(1), any SNMP SET to this object should return
SNMP Error 3 (bad value).
The Agent should report operating(2) under normal
circumstances.
If this object reports operating(2), SNMP Managers are allowed to
set this object to clearing (3), which instructs the Agent
to erase the cross-connect map for this port."
DEFVAL { operating }
::= { nbsCmmcPortEntry 83 }
nbsCmmcPortZoneIfIndexAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mib2 ifIndex of desired crossbar partner. Zero (0) indicates
this port should be unmapped."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 84 }
nbsCmmcPortZoneIfIndexOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mib2 ifIndex of actual crossbar partner. Zero (0) indicates
this port is currently unmapped."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 85 }
nbsCmmcPortEnableOper OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
disable (2),
enable (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual current operational status of the port. This object is
related to the nbsCmmcPortEnableAdmin object, where users
specify the administrative operational status desired.
The value notSupported (1) indicates that the port has no ability to
disable the transceiver.
The value disable (2) indicates that this port's transceiver is not
allowing traffic to flow through this port.
The value enable (3) indicates that this port's transceiver allows
traffic flow."
DEFVAL { enable }
::= { nbsCmmcPortEntry 86 }
nbsCmmcPortMappingType OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
unavailable (2),
open (3),
source (4),
destination (5),
sourceHelper (6),
interChasLink (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative crossbar mapping restrictions for this port.
Non-crossbar ports must be reported as notSupported(1).
If notSupported, any SET attempts will be rejected. Users
may not set this object to notSupported(1).
Users may mark the port as unavailable(2). If unavailable,
the Agent will reject any attempts to map from or to this
port.
By default, each crossbar port is open(3). Open ports have
no mapping restrictions.
Ports that are set to source(4) may be used as the input
(nbsCmmcPortZoneIfIndexAdmin) port by any other crossbar
port. Their own input port may only be mapped to ports
whose nbsCmmcPortMappingType is sourceHelper(6).
Ports that are set to destination(5) may set their own input
(nbsCmmcPortZoneIfIndexAdmin) port to any other crossbar
port. They may not be used as the input port for other
ports.
A sourceHelper(6) port is used to provide whatever sort of
link indication is needed by external traffic sources that
are connected to a source(4) port.
Ports set to interChasLink(7) are physically cabled to
another crossbar port in a separate chassis. That
connection should be entered by the user in the network
topology objects nbsCmmcPortRMChassis, nbsCmmcPortRMSlot,
and nbsCmmcPortRMPort for both those connected ports."
DEFVAL { open }
::= { nbsCmmcPortEntry 87 }
nbsCmmcPortCountersState OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
counting (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to reset MAC counters for this port."
DEFVAL { counting }
::= { nbsCmmcPortEntry 88 }
nbsCmmcPortAmpGainMinimum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates (in millidecibels) the smallest gain
user can set."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 89 }
nbsCmmcPortAmpGainMaximum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates (in millidecibels) the largest gain
user can set."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 90 }
nbsCmmcPortAmpGainStepSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Resolution (in millidecibels) of amplifier. Indicates the
increment between amplifier gain settings."
DEFVAL { 100 }
::= { nbsCmmcPortEntry 91 }
nbsCmmcPortSniffer OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sniffing on or off."
DEFVAL { off }
::= { nbsCmmcPortEntry 92 }
nbsCmmcPortExternalLink1 OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Equivalent to the nbsCmmcPortRMChassis, nbsCmmcPortRMSlot,
and nbsCmmcPortRMPort triplet.
Set to 0 to indicate this port has no associated intra-node or inter-node
endpoint."
::= { nbsCmmcPortEntry 93 }
nbsCmmcPortExternalLink2 OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For y-cable implementations - set by the user to indicate
the second intra-node endpoint of a y-cable.
Set to 0 to indicate this port has no associated intra-node or inter-node
y-cable endpoint."
::= { nbsCmmcPortEntry 94 }
nbsCmmcPortNVAreaBanks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of executable images that can be stored
locally on this module.
This number does not count any memory banks that are in
a modular subcomponent of this card. Please refer to
nbsPartProgNVAreaStart and nbsPartProgNVAreaBanks for that
information.
Not supported value: 0"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 95 }
nbsCmmcPortFirmwareCaps OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this module can
support. This object is mandatory for all modules.
Bit 0 is reserved.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is appropriate for this
module, cleared (0) if unavailable.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcPortEntry 96 }
nbsCmmcPortFirmwareLoad OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This bitmask indicates which executable images this module
has stored in its own NV area. This object is mandatory for
all modules.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0. Bit 0
indicates whether an executable image is loading.
Subsequent bits refer to the nbsCmmcSysFirmwareTable. Bit 1
corresponds to the first table entry, Bit 2 to the second entry,
and so on. A bit is set (1) if that image is stored on this
module, cleared (0) if not.
Clearing bits has no effect. To erase an NV area, use the
nbsCmmcSysNVAreaTable.
Users may transfer a file to an NV area by setting the appropriate
file's bit and the loading (MSB) bit to one (1). Adding a file
requires that the NM start a file transfer to this module, which
is a lengthy operation. If a transfer session is already active
(nbsCmmcSlotLoader is non-zero), writes to this object will be
rejected.
A zero length OCTET STRING indicates that the
nbsCmmcSysFirmwareTable is not supported by this agent."
::= { nbsCmmcPortEntry 97 }
nbsCmmcPortNVAreaAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A SET on this object will force the corresponding
nbsCmmcSysNvAreaStatus to primary, set this module's other
memory banks to backup, and immediately load and execute
the firmware image contained in the specified memory bank.
A GET on this object will indicate the memory bank of this
module that is currently designated as primary.
Not supported value: -1"
DEFVAL { 0 }
::= { nbsCmmcPortEntry 98 }
nbsCmmcPortNVAreaOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysNVAreaBank of nbsCmmcSysNVAreaTable corresponding
to the current operationally active firmware image.
0 indicates the current active image is NOT in the NVAreaTable.
Not supported value: -1"
DEFVAL { -1 }
::= { nbsCmmcPortEntry 99 }
nbsCmmcPortLoader OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysLoaderIndex of nbsCmmcSysLoaderTable
corresponding to the current loading session.
0 indicates no loading session is active."
DEFVAL { 0 }
::= { nbsCmmcPortEntry 100 }
-- ************************************************************
-- Objects in the SMTP (Simple Mail Transfer Protocol) group
-- Implementation of the SMTP group is optional, but within the group
-- all the elements are mandatory. If the SMTP feature is implemented,
-- the entire group should be implemented.
-- ************************************************************
-- This group allows the setup of the mail sender paramters. It is
-- assummed that the device is directly connected to a e-mail server
-- or e-mail relay/forward capable device.
-- ************************************************************
nbsCmmcSmtpDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "This entry contains the device's domain name.
For example myDomain.com. It is used to identify
the sender's domain."
::= { nbsCmmcSmtpGrp 1 }
nbsCmmcSmtpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "Entry containing SMTP server's IP address."
::= { nbsCmmcSmtpGrp 2 }
nbsCmmcSmtpRcvrLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Event severity level threshold for this SMTP receiver.
If the event severity level is at least nbsCmmcSmtpRcvrLevel.
the SNMP agent will generate an e-mail to this SMTP
receiver."
DEFVAL { 0 }
::= { nbsCmmcSmtpGrp 3 }
nbsCmmcSmtpRcvrNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "Maximum number of SMTP receivers in nbsCmmcSmtpRcvrTable."
::= { nbsCmmcSmtpGrp 4 }
nbsCmmcSmtpRcvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSmtpRcvrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "A list of SMTP receivers entries."
::= { nbsCmmcSmtpGrp 5 }
nbsCmmcSmtpRcvrEntry OBJECT-TYPE
SYNTAX NbsCmmcSmtpRcvrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing SMTP information for a particular
receiver entry."
INDEX { nbsCmmcSmtpRcvrIndex }
::= { nbsCmmcSmtpRcvrTable 1 }
NbsCmmcSmtpRcvrEntry ::= SEQUENCE {
nbsCmmcSmtpRcvrIndex INTEGER,
nbsCmmcSmtpRcvrEmailAddress DisplayString,
nbsCmmcSmtpRcvrStatus INTEGER
}
nbsCmmcSmtpRcvrIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Email Recipient Index"
::= { nbsCmmcSmtpRcvrEntry 1 }
nbsCmmcSmtpRcvrEmailAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Entry containing SMTP receiver's domain name (email address).
The default is the device's domain name, if set."
::= { nbsCmmcSmtpRcvrEntry 2 }
nbsCmmcSmtpRcvrStatus OBJECT-TYPE
SYNTAX INTEGER{
invalid (1), -- entry is invalid (deleted)
valid (2) -- entry is valid (add)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"To add a new entry to the nbsCmmcSmtpRcvrTable, set this
object to valid(2) for an IP address which is not
already in the table. To remove an entry from the
table, set this object to invalid(1)."
::= { nbsCmmcSmtpRcvrEntry 3 }
-- ************************************************************
-- Objects in the sysLog (System Log) group
--
-- Implementation of the sysLog group is mandatory.
--
-- ************************************************************
nbsCmmcSysLogRunningLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
fatal (2),
error (3),
warning (4),
info (5),
memo (6),
alarm (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level at which the system log message handler
saves to a running message log.
The level disabled(1) instructs the Agent to log nothing.
This level may not be supported in some Agent versions.
The level fatal(2) instructs Agent to log only events such
as unplanned system shutdowns.
The level error(3) includes fatal(2) events and events such
as module failures.
The level alarm(7) includes fatal(2), error(3), and other
events that probably require immediate attention.
The level warning(4) includes fatal(2), error(3), alarm(7),
as well as events that probably need attention.
The level info(5) includes all higher severities, plus
events that indicate interesting but not necessarily
problematic conditions.
The level memo(6) includes all event notifications."
DEFVAL { warning }
::= { nbsCmmcSysLogGrp 1 }
nbsCmmcSysLogNvLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
fatal (2),
error (3),
warning (4),
info (5),
memo (6),
alarm (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level at which the system log message handler
saves in a non-volatile media(NVRAM,FLASH,etc.).
For descriptions of each level, please see the DESCRIPTION
for nbsCmmcSysLogRunningLevel."
DEFVAL { disabled }
::= { nbsCmmcSysLogGrp 2 }
nbsCmmcSysLogTrapLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
fatal (2),
error (3),
warning (4),
info (5),
memo (6),
alarm (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level at which the system log message handler
should generate a trap or SNMP notification.
For descriptions of each level, please see the DESCRIPTION
for nbsCmmcSysLogRunningLevel."
DEFVAL { warning }
::= { nbsCmmcSysLogGrp 3 }
nbsCmmcSysLogEmailLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
fatal (2),
error (3),
warning (4),
deprecated5 (5),
deprecated6 (6),
alarm (7),
notSupported (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level at which the system log message handler
should generate an email message.
For descriptions of each level, please see the DESCRIPTION
for nbsCmmcSysLogRunningLevel."
DEFVAL { disabled }
::= { nbsCmmcSysLogGrp 4 }
--
-- the Log message table
--
nbsCmmcSysLogMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines a severity level for each type
of message/event generated by the system."
::= { nbsCmmcSysLogGrp 5 }
nbsCmmcSysLogMessageEntry OBJECT-TYPE
SYNTAX NbsCmmcSysLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A system log message control table entry."
INDEX { nbsCmmcSysLogMessageType }
::= { nbsCmmcSysLogMessageTable 1 }
NbsCmmcSysLogMessageEntry ::= SEQUENCE {
nbsCmmcSysLogMessageType INTEGER,
nbsCmmcSysLogMessageSeverity INTEGER
}
nbsCmmcSysLogMessageType OBJECT-TYPE
SYNTAX INTEGER {
sysReset (1), -- system resets
snmp (2), -- snmp : authentication, etc..
physTraps (3), -- physical layer : link up/down, etc..
dot1dBridge (4), -- bridging : 802.1d , STP, etc..
sysAuthentic (5) -- system authentication (IP access, etc)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System log message type."
::= { nbsCmmcSysLogMessageEntry 1 }
nbsCmmcSysLogMessageSeverity OBJECT-TYPE
SYNTAX INTEGER {
informational(1), -- informational messages
warnings(10), -- warnings
errors(100), -- errors
emergencies(1000), -- fatal errors
debugging(10000) -- debug information
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System log message severity."
::= { nbsCmmcSysLogMessageEntry 2 }
--
-- the Running log message table
--
nbsCmmcSysRunningLogMessageTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of messages in Running log table."
::= { nbsCmmcSysLogGrp 6 }
nbsCmmcSysRunningLogMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysRunningLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the logged messages"
::= { nbsCmmcSysLogGrp 7 }
nbsCmmcSysRunningLogMessageEntry OBJECT-TYPE
SYNTAX NbsCmmcSysRunningLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular message entry"
INDEX { nbsCmmcSysRunningLogMessageIndex }
::= { nbsCmmcSysRunningLogMessageTable 1 }
NbsCmmcSysRunningLogMessageEntry ::= SEQUENCE {
nbsCmmcSysRunningLogMessageIndex INTEGER,
nbsCmmcSysRunningLogMessageSeverity DisplayString,
nbsCmmcSysRunningLogMessageErrorID INTEGER,
nbsCmmcSysRunningLogMessageSession INTEGER,
nbsCmmcSysRunningLogMessageTime INTEGER,
nbsCmmcSysRunningLogMessageModule DisplayString,
nbsCmmcSysRunningLogMessageString DisplayString
}
nbsCmmcSysRunningLogMessageIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the message entry."
::= { nbsCmmcSysRunningLogMessageEntry 1 }
nbsCmmcSysRunningLogMessageSeverity OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The importance of this event."
::= { nbsCmmcSysRunningLogMessageEntry 2 }
nbsCmmcSysRunningLogMessageErrorID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error code of the message."
::= { nbsCmmcSysRunningLogMessageEntry 3 }
nbsCmmcSysRunningLogMessageSession OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Id of session causing the event."
::= { nbsCmmcSysRunningLogMessageEntry 4 }
nbsCmmcSysRunningLogMessageTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of occurrence of the event."
::= { nbsCmmcSysRunningLogMessageEntry 5 }
nbsCmmcSysRunningLogMessageModule OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the module causing the event."
::= { nbsCmmcSysRunningLogMessageEntry 6 }
nbsCmmcSysRunningLogMessageString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual event message."
::= { nbsCmmcSysRunningLogMessageEntry 7 }
nbsCmmcSysNvramLogMessageTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of messages in Nvram log table."
::= { nbsCmmcSysLogGrp 8 }
--
-- the NVRAM log message table
--
nbsCmmcSysNvramLogMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysNvramLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that describes the logged messages"
::= { nbsCmmcSysLogGrp 9 }
nbsCmmcSysNvramLogMessageEntry OBJECT-TYPE
SYNTAX NbsCmmcSysNvramLogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular message entry"
INDEX { nbsCmmcSysNvramLogMessageIndex }
::= { nbsCmmcSysNvramLogMessageTable 1 }
NbsCmmcSysNvramLogMessageEntry ::= SEQUENCE {
nbsCmmcSysNvramLogMessageIndex INTEGER,
nbsCmmcSysNvramLogMessageSeverity DisplayString,
nbsCmmcSysNvramLogMessageErrorID INTEGER,
nbsCmmcSysNvramLogMessageSession INTEGER,
nbsCmmcSysNvramLogMessageTime INTEGER,
nbsCmmcSysNvramLogMessageModule DisplayString,
nbsCmmcSysNvramLogMessageString DisplayString,
nbsCmmcSysNvramLogMessagePTime INTEGER,
nbsCmmcSysNvramLogMessageDateTime DisplayString
}
nbsCmmcSysNvramLogMessageIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the message entry."
::= { nbsCmmcSysNvramLogMessageEntry 1 }
nbsCmmcSysNvramLogMessageSeverity OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severity of the error."
::= { nbsCmmcSysNvramLogMessageEntry 2 }
nbsCmmcSysNvramLogMessageErrorID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error code of the message."
::= { nbsCmmcSysNvramLogMessageEntry 3 }
nbsCmmcSysNvramLogMessageSession OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Id of session causing the error."
::= { nbsCmmcSysNvramLogMessageEntry 4 }
nbsCmmcSysNvramLogMessageTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MIB-II sysUpTime (RFC 1213) at the time the
error occurred. Note that sysUpTime resets to zero
each time the agent is restarted."
::= { nbsCmmcSysNvramLogMessageEntry 5 }
nbsCmmcSysNvramLogMessageModule OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the module causing the error."
::= { nbsCmmcSysNvramLogMessageEntry 6 }
nbsCmmcSysNvramLogMessageString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual error message."
::= { nbsCmmcSysNvramLogMessageEntry 7 }
nbsCmmcSysNvramLogMessagePTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysCurrentTime at the moment this entry
was made. This timestamp is derived from the Time
Protocol (RFC 868), so it is independent of the
system's UpTime. If the agent is unable to obtain
the current time from a Time Protocol server, this
value is 0.
Not supported value: 0"
::= { nbsCmmcSysNvramLogMessageEntry 8 }
nbsCmmcSysNvramLogMessageDateTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysCurrentDateTime at the moment this
entry was made. This timestamp is derived from
nbsCmmcSysNvramLogMessagePTime, so it is independent
of the system's UpTime."
::= { nbsCmmcSysNvramLogMessageEntry 9 }
--
-- the Audit log table
--
nbsCmmcSysAuditLogTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the audit log."
::= { nbsCmmcSysLogGrp 10 }
nbsCmmcSysAuditLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsCmmcSysAuditLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User activity log."
::= { nbsCmmcSysLogGrp 11 }
nbsCmmcSysAuditLogEntry OBJECT-TYPE
SYNTAX NbsCmmcSysAuditLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a description of a particular message entry"
INDEX { nbsCmmcSysAuditLogIndex }
::= { nbsCmmcSysAuditLogTable 1 }
NbsCmmcSysAuditLogEntry ::= SEQUENCE {
nbsCmmcSysAuditLogIndex INTEGER,
nbsCmmcSysAuditLogUpTime INTEGER,
nbsCmmcSysAuditLogDateTime DisplayString,
nbsCmmcSysAuditLogString DisplayString
}
nbsCmmcSysAuditLogIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the message entry."
::= { nbsCmmcSysAuditLogEntry 1 }
nbsCmmcSysAuditLogUpTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MIB-II sysUpTime (RFC 1213) at the time the
error occurred. Note that sysUpTime resets to zero
each time the agent is restarted."
::= { nbsCmmcSysAuditLogEntry 2 }
nbsCmmcSysAuditLogDateTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nbsCmmcSysCurrentDateTime at the moment this
entry was made. This timestamp is independent
of the system's UpTime."
::= { nbsCmmcSysAuditLogEntry 3 }
nbsCmmcSysAuditLogString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Log entry. Usually username:login or username:logout"
::= { nbsCmmcSysAuditLogEntry 4 }
nbsCmmcSysLogRemoteServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address that rsyslog messages should be sent to."
::= { nbsCmmcSysLogGrp 12 }
nbsCmmcSysLogRemoteLevel OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
emerg (2),
alert (3),
crit (4),
error (5),
warning (6),
notice (7),
info (8),
debug (9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level at which the system log message handler
sends to remote syslog server."
DEFVAL { notice }
::= { nbsCmmcSysLogGrp 13 }
nbsCmmcSysRunningLogMessageClear OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to erase all entries from the Agent's
internal Running Log.
If the Agent does not support this feature, it must return
the value notSupported(1), and any SNMP SET to this object
should get an SNMP error badValue(3) in response.
If this object is supported, the Agent normally should
report the value operating(2). If it is actually deleting
the log, it may report the value clearing(3).
SNMP Managers may set this object to clearing(3), which
indicates to the Agent that the log should be emptied."
DEFVAL { operating }
::= { nbsCmmcSysLogGrp 14 }
nbsCmmcSysNvramLogMessageClear OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to erase all entries from the Agent's
internal NVRAM (Persistent Memory) Log.
If the Agent does not support this feature, it must return
the value notSupported(1), and any SNMP SET to this object
should get an SNMP error badValue(3) in response.
If this object is supported, the Agent normally should
report the value operating(2). If it is actually deleting
the log, it may report the value clearing(3).
SNMP Managers may set this object to clearing(3), which
indicates to the Agent that the log should be emptied."
DEFVAL { operating }
::= { nbsCmmcSysLogGrp 15 }
nbsCmmcSysAuditLogClear OBJECT-TYPE
SYNTAX INTEGER {
notSupported (1),
operating (2),
clearing (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to erase all entries from the Agent's
internal Audit Log.
If the Agent does not support this feature, it must return
the value notSupported(1), and any SNMP SET to this object
should get an SNMP error badValue(3) in response.
If this object is supported, the Agent normally should
report the value operating(2). If it is actually deleting
the log, it may report the value clearing(3).
SNMP Managers may set this object to clearing(3), which
indicates to the Agent that the log should be emptied."
DEFVAL { operating }
::= { nbsCmmcSysLogGrp 16 }
nbsCmmcSysLogNvSize OBJECT-TYPE
SYNTAX INTEGER (4..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"How large the Nvram log is allowed to be (in kilobytes)."
DEFVAL { 64 }
::= { nbsCmmcSysLogGrp 17 }
-- ******************************************************************
--
-- Objects for the TRAP message configuration.
--
-- Implementation of the nbsCmmcTrapGrp is mandatory.
--
-- ******************************************************************
nbsCmmcTrapLastMessage OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The last message sent by the system"
::= { nbsCmmcTrapGrp 1 }
nbsCmmcTrapPowerSupplyId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"ID of the power supply"
::= { nbsCmmcTrapGrp 2 }
nbsCmmcTrapFanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"ID of the fan"
::= { nbsCmmcTrapGrp 3 }
nbsCmmcTrapPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index of the Port"
::= { nbsCmmcTrapGrp 4 }
nbsCmmcTrapPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Name of the Port"
::= { nbsCmmcTrapGrp 5 }
nbsCmmcTrapShutdownReason OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for the last system shutdown"
::= { nbsCmmcTrapGrp 6 }
nbsCmmcTrapErrorInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Brief explanation of the cause or nature of errors
that triggered an nbsCmmcTrapPortErrorsDetected trap."
DEFVAL { "Ethernet." }
::= { nbsCmmcTrapGrp 7 }
nbsCmmcSlotModelLocked OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The model of the slot's saved configuration."
::= { nbsCmmcTrapGrp 10 }
nbsCmmcSlotModelInserted OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..50))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The model of the newly inserted module."
::= { nbsCmmcTrapGrp 11 }
-- ********************************************************************
-- nbsCmmcTraps
-- ********************************************************************
nbsCmmcTrapGenericTrap NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage }
STATUS deprecated
DESCRIPTION
"The last message sent by the system."
::= { nbsCmmcTraps0 1}
nbsCmmcTrapSpecificTrap NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage }
STATUS deprecated
DESCRIPTION
"********* DEPRECATED **********
As of Agent version 4.14, this trap will not be sent."
::= { nbsCmmcTraps0 2 }
nbsCmmcTrapDeviceRebooted NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcTrapShutdownReason }
STATUS current
DESCRIPTION
"Sent after device boots up. The cause of the last
shutdown is indicated in nbsCmmcTrapShutdownReason.
This Notification should be of Severity FATAL."
::= { nbsCmmcTraps0 3 }
nbsCmmcTrapDeviceOnline NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex }
STATUS current
DESCRIPTION
"Sent when device detects restoration of network
communications. ChassisIndex and SlotIndex indicate
the location of the NM issuing the trap
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 4 }
nbsCmmcTrapDeviceShuttingDown NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcTrapShutdownReason }
STATUS current
DESCRIPTION
"Sent just before device shuts itself down. Reason for
shutdown is indicated in nbsCmmcTrapShutdownReason.
This Notification should be of Severity FATAL."
::= { nbsCmmcTraps0 5 }
nbsCmmcTrapPowerSupplyFailure NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapPowerSupplyId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Unique trap for power supply failure events.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 6 }
nbsCmmcTrapPowerSupplyRestored NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapPowerSupplyId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when power supply starts working again.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 7 }
nbsCmmcTrapFanFailure NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapFanId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Unique trap for fan failure events.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 8 }
nbsCmmcTrapFanRestored NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapFanId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when fan starts working again.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 9 }
nbsCmmcTrapChassisTempTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcChassisTemperature,
nbsCmmcChassisTemperatureLimit, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when temperature rises above hottest permissible
temperature.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 10 }
nbsCmmcTrapChassisTempTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcChassisTemperature,
nbsCmmcChassisTemperatureMin, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when temperature falls under coldest permissible
temperature.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 11 }
nbsCmmcTrapChassisTempOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcChassisTemperature, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when temperature returns to permissible range.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 12 }
nbsCmmcTrapSlotModuleIn NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotType, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when card is physically inserted.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 13 }
nbsCmmcTrapSlotModuleOut NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotType, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when card is physically removed.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 14 }
nbsCmmcTrapPortEnabled NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent after nbsCmmcPortEnableOper changes to enable(3).
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 15 }
nbsCmmcTrapPortDisabled NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent after nbsCmmcPortEnableOper changes to disable(2).
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 16 }
nbsCmmcTrapPortLinkUp NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcPortLink,
nbsCmmcChassisName, nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when nbsCmmcPortLink transitions from noSignal(2)
to a connected state.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 17 }
nbsCmmcTrapPortLinkDown NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when nbsCmmcPortLink transitions from a connected
state to noSignal(2).
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 18 }
nbsCmmcTrapPortLINOn NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when Link Integrity Notification is turned on.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 19 }
nbsCmmcTrapPortLINOff NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when Link Integrity Notification is turned off.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 20 }
nbsCmmcTrapPortLoopbackOn NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when Port is set to a Loopback state.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 21 }
nbsCmmcTrapPortLoopbackOff NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when Port returns from a Loopback state.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 22 }
nbsCmmcTrapPortMaximumExceeded NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortThreshold, nbsCmmcPortValue,
nbsCmmcChassisName, nbsCmmcSlotName,
nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when PortValue exceeds PortThreshold.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 23 }
nbsCmmcTrapPortRemoved NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName, nbsCmmcSlotName,
nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when a hot-swappable port is removed.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 24 }
nbsCmmcTrapPortInserted NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortConnector, nbsCmmcPortWavelength,
nbsCmmcChassisName, nbsCmmcSlotName,
nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when a hot-swappable port is inserted.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 25 }
nbsCmmcTrapPortTempTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTemperature, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortTemperatureLevel }
STATUS current
DESCRIPTION
"Sent when transmitter temperature is too cold. For
SFF Digital Diagnostics, this corresponds to the low
temperature alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 26 }
nbsCmmcTrapPortTempTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTemperature, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortTemperatureLevel }
STATUS current
DESCRIPTION
"Sent when transmitter temperature is too hot. For
SFF Digital Diagnostics, this corresponds to the high
temperature alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 27 }
nbsCmmcTrapPortRxPowerTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortRxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortRxPowerLevel }
STATUS current
DESCRIPTION
"Sent when received signal is too weak. For
SFF Digital Diagnostics, this corresponds to the low
RX power alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 28 }
nbsCmmcTrapPortRxPowerTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortRxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortRxPowerLevel }
STATUS current
DESCRIPTION
"Sent when received signal is too powerful. For
SFF Digital Diagnostics, this corresponds to the high
RX power alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 29 }
nbsCmmcTrapPortTxPowerTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortTxPowerLevel }
STATUS current
DESCRIPTION
"Sent when transmitter power is too weak. For
SFF Digital Diagnostics, this corresponds to the low
TX power alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 30 }
nbsCmmcTrapPortTxPowerTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortTxPowerLevel }
STATUS current
DESCRIPTION
"Sent when transmitter power is too strong. For
SFF Digital Diagnostics, this corresponds to the high
TX power alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 31 }
nbsCmmcTrapPortAmpsTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortBiasAmps, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortBiasAmpsLevel }
STATUS current
DESCRIPTION
"Sent when bias current is too small. For
SFF Digital Diagnostics, this corresponds to the low
bias current alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 32 }
nbsCmmcTrapPortAmpsTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortBiasAmps, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortBiasAmpsLevel }
STATUS current
DESCRIPTION
"Sent when bias current is too large. For
SFF Digital Diagnostics, this corresponds to the high
bias current alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 33 }
nbsCmmcTrapPortVoltsTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortSupplyVolts, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortSupplyVoltsLevel }
STATUS current
DESCRIPTION
"Sent when transceiver supply voltage is too low. For
SFF Digital Diagnostics, this corresponds to the low
supply voltage alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 34 }
nbsCmmcTrapPortVoltsTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortSupplyVolts, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortThreshold,nbsCmmcPortSupplyVoltsLevel }
STATUS current
DESCRIPTION
"Sent when transceiver supply voltage is too high. For
SFF Digital Diagnostics, this corresponds to the high
supply voltage alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 35 }
nbsCmmcTrapSwitchover NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex, nbsCmmcTrapPortIndex,
nbsCmmcChassisName, nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcTrapPortName }
STATUS current
DESCRIPTION
"Sent when a self-healing (redundant ports) card
switches traffic from an active port to a standby
port.
This Notification should be of Severity WARNING.
The VARIABLE TrapLastMessage should specify the cause
of the switchover, the PortName of the new Active port,
and the PortName of the new Standby (formerely Active)
port.
The ChassisIndex and SlotIndex indicate the card that
performed the switchover.
The first PortIndex is the new Active port. The last
PortIndex is the new Standby port.
This trap should be accompanied by link up/down traps."
::= { nbsCmmcTraps0 36 }
nbsCmmcTrapSlotShuttingDown NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcTrapShutdownReason,
nbsCmmcChassisName, nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when the slot/card is shutting down.
This Notification should be of Severity WARNING if the
shutdown is deliberate, or ERROR if shutdown because
of module failure, i.e. last gasp.
The VARIABLE nbsCmmcTrapShutdownReason should specify
the reason the card is shutting down.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 37 }
nbsCmmcTrapPortCrcError NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when CRC Error is received on this port.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 38 }
nbsCmmcTrapCpeInManagedChassis NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when a module configured for customer premises is
detected in a managed (central office) chassis.
This Notification should be of Severity WARNING.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 39 }
nbsCmmcTrapCoWithoutCpe NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when a central office module has no link to a CPE
module.
This Notification should be of Severity WARNING.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 40 }
nbsCmmcTrapCoTakesControl NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when a central office module begins active
management of a dual-homed CPE module.
This Notification should be of Severity WARNING.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 41 }
nbsCmmcTrapCoYieldsControl NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when a central office module ceases active
management of a dual-homed CPE module.
This Notification should be of Severity WARNING.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 42 }
nbsCmmcTrapCoLinkedToCo NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when one central office module is connected to
another central office module.
This Notification should be of Severity ERROR.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 43 }
nbsCmmcTrapCpeFound NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when a remote CPE module is detected.
This Notification should be of Severity WARNING.
To enable/disable this notification, use the object
nbsCmmcChassisEnableModuleSpecificTraps."
::= { nbsCmmcTraps0 44 }
nbsCmmcTrapPortReflectionDetected NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when SingleFiber port detects its own signal
reflecting back on itself.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 45 }
nbsCmmcTrapPortReflectionCeased NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when SingleFiber port no longer detects its own
signal returning.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 46 }
nbsCmmcTrapPortTempOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTemperature, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when transmitter temperature returns to normal.
For Agent's internal severity-based filtering.
The severity of this NOTIFICATION must match the
severity of the nbsCmmcTrapPortTempTooLow or
nbsCmmcTrapPortTempTooHigh NOTIFICATION that this
overrides."
::= { nbsCmmcTraps0 47 }
nbsCmmcTrapPortRxPowerOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortRxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when received signal returns to normal.
For Agent's internal severity-based filtering.
The severity of this NOTIFICATION must match the
severity of the nbsCmmcTrapPortRxPowerTooLow or
nbsCmmcTrapPortRxPowerTooHigh NOTIFICATION that this
overrides."
::= { nbsCmmcTraps0 48 }
nbsCmmcTrapPortTxPowerOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortTxPower, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when transmitter power returns to normal.
For Agent's internal severity-based filtering.
The severity of this NOTIFICATION must match the
severity of the nbsCmmcTrapPortTxPowerTooLow or
nbsCmmcTrapPortTxPowerTooHigh NOTIFICATION that this
overrides."
::= { nbsCmmcTraps0 49 }
nbsCmmcTrapPortAmpsOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortBiasAmps, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when bias current returns to normal.
For Agent's internal severity-based filtering.
The severity of this NOTIFICATION must match the
severity of the nbsCmmcTrapPortAmpsTooLow or
bsCmmcTrapPortAmpsTooHigh NOTIFICATION that this
overrides."
::= { nbsCmmcTraps0 50 }
nbsCmmcTrapPortVoltsOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcPortSupplyVolts, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when transceiver supply voltage returns to normal.
For Agent's internal severity-based filtering.
The severity of this NOTIFICATION must match the
severity of the nbsCmmcTrapPortVoltsTooLow or
nbsCmmcTrapPortVoltsTooHigh NOTIFICATION that this
overrides."
::= { nbsCmmcTraps0 51 }
nbsCmmcTrapSlotTempTooLow NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotTemperature,
nbsCmmcSlotTemperatureMin,
nbsCmmcChassisName, nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when slot temperature is too cold.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 52 }
nbsCmmcTrapSlotTempTooHigh NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotTemperature,
nbsCmmcSlotTemperatureLimit,
nbsCmmcChassisName, nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when slot temperature is too hot.
temperature alarm.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 53 }
nbsCmmcTrapSlotTempOk NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotTemperature,
nbsCmmcChassisName, nbsCmmcSlotName }
STATUS current
DESCRIPTION
"Sent when slot temperature returns to normal.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 54 }
nbsCmmcTrapPortErrorsDetected NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcTrapErrorInfo, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when nbsCmmcPortErrorActivity changes to on(3).
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 55 }
nbsCmmcTrapPortErrorsStopped NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcPortName }
STATUS current
DESCRIPTION
"Sent when nbsCmmcPortErrorActivity changes to off(2).
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 56 }
nbsCmmcTrapChassisInsufficientPower NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when power on chassis changed to insufficient.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 57 }
nbsCmmcTrapChassisSufficientPower NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Sent when power on chassis changed to sufficient.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 58 }
nbsCmmcTrapSlotModuleLocked NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcChassisName,
nbsCmmcSlotName, nbsCmmcSlotModelLocked,
nbsCmmcSlotModelInserted }
STATUS current
DESCRIPTION
"Sent when nbsCmmcSysLockTypes is enabled(3) and a card
incompatible with a slot's locked configuration is
inserted.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 59 }
nbsCmmcTrapSelectLinkChanged NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcPortIndex,
nbsCmmcChassisName, nbsCmmcSlotName, nbsCmmcPortName,
nbsCmmcPortSelectLink }
STATUS current
DESCRIPTION
"Sent when a redundant port in a self-healing card
switches between active and standby. The last varbind,
nbsCmmcPortSelectLink, indicates this port's new state.
This notification should come in a pair -- one trap for
the new active port, another for the new standby port.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 60 }
nbsCmmcTrapPowerSupplyRemoved NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapPowerSupplyId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Event triggered by physical removal of a power supply.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 66 }
nbsCmmcTrapPowerSupplyInserted NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapPowerSupplyId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Triggered by physical insertion of a power supply.
This Notification should be of Severity ERROR."
::= { nbsCmmcTraps0 67 }
nbsCmmcTrapFanRemoved NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapFanId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Triggered by physical removal of fan assembly.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 68 }
nbsCmmcTrapFanInserted NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcTrapFanId, nbsCmmcChassisName }
STATUS current
DESCRIPTION
"Triggered by physical insertion of fan assembly.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 69 }
nbsCmmcTrapModuleStatusChanged NOTIFICATION-TYPE
OBJECTS { nbsCmmcTrapLastMessage, nbsCmmcChassisIndex,
nbsCmmcSlotIndex, nbsCmmcSlotName,
nbsCmmcSlotModuleStatus }
STATUS current
DESCRIPTION
"Triggered when nbsCmmcSlotModuleStatus changes.
If a module is unplugged and nbsCmmcSlotModuleStatus
transitions directly to empty(2), a trap will not be
generated.
This Notification should be of Severity WARNING."
::= { nbsCmmcTraps0 70 }
END
Reference in New Issue Copy Permalink