mibs/MIBS/mrv/NBS-OSA-MIB

501 lines
15 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
NBS-OSA-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, TimeTicks, OBJECT-TYPE,
MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
InterfaceIndex, ifAlias
FROM IF-MIB
NbsCmmcChannelBand
FROM NBS-CMMCENUM-MIB
nbs, NbsTcMHz
FROM NBS-MIB;
nbsOsaMib MODULE-IDENTITY
LAST-UPDATED "201503190000Z"
ORGANIZATION "NBS"
CONTACT-INFO
"For technical support, please contact your service channel"
DESCRIPTION
"MIB for controlling and monitoring optical spectrum analyzers"
::= { nbs 207 }
-- *******************************************************************
-- NBS-OSA-MIB local defines
-- *******************************************************************
nbsOsaPortGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"OSA Card information"
::= { nbsOsaMib 1 }
nbsOsaSpectrumGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Info and settings for channels"
::= { nbsOsaMib 2 }
nbsOsaChannelGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Info and settings for channels"
::= { nbsOsaMib 3 }
nbsOsaTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION "SNMP Traps or Notifications"
::= { nbsOsaMib 4 }
-- *******************************************************************
--
-- the nbsOsaPortTable
--
-- *******************************************************************
nbsOsaPortTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsOsaPortTable."
::= { nbsOsaPortGrp 1 }
nbsOsaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsOsaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { nbsOsaPortGrp 2 }
NbsOsaPortEntry ::= SEQUENCE {
nbsOsaPortIfIndex InterfaceIndex,
nbsOsaPortAttenuation INTEGER,
nbsOsaPortChannels INTEGER
}
nbsOsaPortEntry OBJECT-TYPE
SYNTAX NbsOsaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { nbsOsaPortIfIndex }
::= { nbsOsaPortTable 1 }
nbsOsaPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mib2 ifIndex of the optical spectrum analyzer port"
::= { nbsOsaPortEntry 2 }
nbsOsaPortAttenuation OBJECT-TYPE
SYNTAX INTEGER (-100000..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Attenuation subtracted from RxPower readings, in millidecibels (mdB).
When SET, agent immediately clears nbsOsaChannelTable and
nbsOsaSpectrumTable entries for this ifIndex."
DEFVAL { 0 }
::= { nbsOsaPortEntry 3 }
nbsOsaPortChannels OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of nbsOsaChannelTable entries for this port."
DEFVAL { 0 }
::= { nbsOsaPortEntry 4 }
-- *******************************************************************
--
-- the nbsOsaSpectrumTable
--
-- *******************************************************************
nbsOsaSpectrumTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsOsaSpectrumTable."
::= { nbsOsaSpectrumGrp 1 }
nbsOsaSpectrumTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsOsaSpectrumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported channels, their signal strength, and
user-configured thresholds."
::= { nbsOsaSpectrumGrp 2 }
NbsOsaSpectrumEntry ::= SEQUENCE {
nbsOsaSpectrumIfIndex InterfaceIndex,
nbsOsaSpectrumWavelength INTEGER,
nbsOsaSpectrumTimestamp TimeTicks,
nbsOsaSpectrumRxPowerOper INTEGER
}
nbsOsaSpectrumEntry OBJECT-TYPE
SYNTAX NbsOsaSpectrumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Reports status of monitored frequencies."
INDEX { nbsOsaSpectrumIfIndex, nbsOsaSpectrumWavelength }
::= { nbsOsaSpectrumTable 1 }
nbsOsaSpectrumIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mib2 ifIndex of the optical spectrum analyzer port"
::= { nbsOsaSpectrumEntry 2 }
nbsOsaSpectrumWavelength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The measured wavelength, in picometers (pm)."
::= { nbsOsaSpectrumEntry 3 }
nbsOsaSpectrumTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUptime when this table row was last updated."
::= { nbsOsaSpectrumEntry 4 }
nbsOsaSpectrumRxPowerOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last known signal strength, in millidecibels (mdBm), of this
channel."
::= { nbsOsaSpectrumEntry 5 }
-- *******************************************************************
--
-- the nbsOsaChannelTable
--
-- *******************************************************************
nbsOsaChannelTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsOsaChannelTable."
::= { nbsOsaChannelGrp 1 }
nbsOsaChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsOsaChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported channels, their signal strength, and
user-configured thresholds."
::= { nbsOsaChannelGrp 2 }
NbsOsaChannelEntry ::= SEQUENCE {
nbsOsaChannelIfIndex InterfaceIndex,
nbsOsaChannelFrequencyNominal NbsTcMHz,
nbsOsaChannelBand NbsCmmcChannelBand,
nbsOsaChannelNumber INTEGER,
nbsOsaChannelStatus INTEGER,
nbsOsaChannelTimestamp TimeTicks,
nbsOsaChannelFrequencyOper NbsTcMHz,
nbsOsaChannelRxPowerOper INTEGER,
nbsOsaChannelRxPowerMin INTEGER,
nbsOsaChannelRxPowerMax INTEGER,
nbsOsaChannelOSNROper INTEGER,
nbsOsaChannelOSNRMin INTEGER,
nbsOsaChannelOSNRMax INTEGER
}
nbsOsaChannelEntry OBJECT-TYPE
SYNTAX NbsOsaChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Reports status of monitored frequencies."
INDEX { nbsOsaChannelIfIndex, nbsOsaChannelFrequencyNominal }
::= { nbsOsaChannelTable 1 }
nbsOsaChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mib2 ifIndex of the optical spectrum analyzer port"
::= { nbsOsaChannelEntry 1 }
nbsOsaChannelFrequencyNominal OBJECT-TYPE
SYNTAX NbsTcMHz
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nominal frequency, in MHz, of this channel."
::= { nbsOsaChannelEntry 2 }
nbsOsaChannelBand OBJECT-TYPE
SYNTAX NbsCmmcChannelBand
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ITU grid labels DWDM channels with a letter 'band' and a
numeric channel. Within this mib, the band is indicated by
this object, and the channel number is shown in the object
nbsOsaChannelNumber.
Frequencies of at least 180100 GHz but less than 190100 GHz
are considered the L spectrum, and frequencies of at least
190100 but less than 200100 GHz are considered the C spectrum.
Frequencies evenly divisible by 100 GHz are designated with
a 'C' or 'L' prepended to the channel number. Frequencies
that are offset by 50 GHz are designated 'H' within the C
spectrum, and 'Q' within the L spectrum."
::= { nbsOsaChannelEntry 3 }
nbsOsaChannelNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel number can be derived by extracting the two middle
digits from the six digit frequency in GHz."
::= { nbsOsaChannelEntry 4 }
nbsOsaChannelStatus OBJECT-TYPE
SYNTAX INTEGER {
absent (1),
present (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the OSA thinks the channel is there or not."
::= { nbsOsaChannelEntry 5 }
nbsOsaChannelTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUptime when this table row was last updated."
::= { nbsOsaChannelEntry 6 }
nbsOsaChannelFrequencyOper OBJECT-TYPE
SYNTAX NbsTcMHz
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured frequency, in MHz, of this channel."
::= { nbsOsaChannelEntry 7 }
nbsOsaChannelRxPowerOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last known signal strength, in millidecibels (mdBm), of this
channel.
Not supported value: -100001"
DEFVAL { -100000 }
::= { nbsOsaChannelEntry 8 }
nbsOsaChannelRxPowerMin OBJECT-TYPE
SYNTAX INTEGER (-100000..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-specified minimum signal strength, in millidecibels
(mdBm), of this channel.
Not supported value: -100001"
DEFVAL { 0 }
::= { nbsOsaChannelEntry 9 }
nbsOsaChannelRxPowerMax OBJECT-TYPE
SYNTAX INTEGER (-100000..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-specified maximum signal strength, in millidecibels
(mdBm), of this channel.
Not supported value: -100001"
DEFVAL { 0 }
::= { nbsOsaChannelEntry 10 }
nbsOsaChannelOSNROper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last known OSNR, in permil, of this channel."
::= { nbsOsaChannelEntry 11 }
nbsOsaChannelOSNRMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-specified minimum OSNR of this channel"
DEFVAL { 1000 }
::= { nbsOsaChannelEntry 12 }
nbsOsaChannelOSNRMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-specified maximum OSNR of this channel"
DEFVAL { 1000 }
::= { nbsOsaChannelEntry 13 }
-- *******************************************************************
--
-- nbsOsaChannelTraps (Notifications)
--
nbsOsaTrapPortChannelAdded NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelFrequencyNominal }
STATUS current
DESCRIPTION
"Sent when optical spectrum analyser first detects a channel.
This Notification should be of Severity ERROR."
::= { nbsOsaTraps 1 }
nbsOsaTrapPortChannelDropped NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelFrequencyNominal }
STATUS current
DESCRIPTION
"Sent when optical spectrum analyser stops detecting a channel.
This Notification should be of Severity ERROR."
::= { nbsOsaTraps 2 }
nbsOsaTrapPortRxPowerTooLow NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelRxPowerMin,
nbsOsaChannelRxPowerOper }
STATUS current
DESCRIPTION
"Sent when RxPower is lower than nbsOsaChannelRxPowerMin.
This Notification should be of Severity ERROR.
Note: mdBm"
::= { nbsOsaTraps 3 }
nbsOsaTrapPortRxPowerOK NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelRxPowerOper }
STATUS current
DESCRIPTION
"Sent when RxPower returns to a level between
nbsOsaChannelRxPowerMin and nbsOsaChannelRxPowerMax.
This Notification should be of Severity ERROR.
Note: mdBm"
::= { nbsOsaTraps 4 }
nbsOsaTrapPortRxPowerTooHigh NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelRxPowerMax,
nbsOsaChannelRxPowerOper }
STATUS current
DESCRIPTION
"Sent when RxPower is higher than nbsOsaChannelRxPowerMax.
This Notification should be of Severity ERROR.
Note: mdBm"
::= { nbsOsaTraps 5 }
nbsOsaTrapPortOSNRTooLow NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelOSNRMin,
nbsOsaChannelOSNROper }
STATUS current
DESCRIPTION
"Sent when OSNR is lower then the configured threshold.
This Notification should be of Severity ERROR."
::= { nbsOsaTraps 6 }
nbsOsaTrapPortOSNROk NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelOSNROper }
STATUS current
DESCRIPTION
"Sent when OSNR is ok.
This Notification should be of Severity ERROR."
::= { nbsOsaTraps 7 }
nbsOsaTrapPortOSNRTooHigh NOTIFICATION-TYPE
OBJECTS { nbsOsaChannelIfIndex,
ifAlias,
nbsOsaChannelBand,
nbsOsaChannelNumber,
nbsOsaChannelOSNRMax,
nbsOsaChannelOSNROper }
STATUS current
DESCRIPTION
"Sent when OSNR is higher then the configured threshold.
This Notification should be of Severity ERROR."
::= { nbsOsaTraps 8 }
END