david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/nokia/ALCATEL-IND1-CHASSIS-MIB

2264 lines
73 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
OBJECT-IDENTITY,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
Unsigned32,
Counter32 FROM SNMPv2-SMI
PhysicalIndex,
entPhysicalIndex FROM ENTITY-MIB
hardentIND1Physical,
chassisTraps,
hardentIND1Chassis FROM ALCATEL-IND1-BASE
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
DisplayString,
MacAddress,
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF;
alcatelIND1ChassisMIB MODULE-IDENTITY
LAST-UPDATED "200706180000Z"
ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
etwork Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the Chassis Supervision
Chassis MIB
for managing physical chassis objects not covered in the IETF
Entity MIB (rfc 2737).
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200906090000Z"
DESCRIPTION
"Added new object chasEntPhysPowerType and TEXTUAL-CONVENTION
ChasEntPhysPowerType."
REVISION "200906260000Z"
DESCRIPTION
"Added new object chasEntPhysPowerControlChecksum."
REVISION "200706180000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { hardentIND1Chassis 1 }
alcatelIND1ChassisMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Managed Objects."
::= { alcatelIND1ChassisMIB 1 }
alcatelIND1ChassisMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Conformance Information."
::= { alcatelIND1ChassisMIB 2 }
alcatelIND1ChassisMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Units Of Conformance."
::= { alcatelIND1ChassisMIBConformance 1 }
alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Compliance Statements."
::= { alcatelIND1ChassisMIBConformance 2 }
alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Managed Objects."
::= { hardentIND1Physical 1 }
alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Conformance Information."
::= { hardentIND1Physical 2 }
alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Units Of Conformance."
::= { alcatelIND1ChassisPhysMIBConformance 1 }
alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Compliance Statements."
::= { alcatelIND1ChassisPhysMIBConformance 2 }
-- CONTROL MODULE TABLE
chasControlModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for the primary control module."
::= { alcatelIND1ChassisMIBObjects 1 }
chasControlModuleEntry OBJECT-TYPE
SYNTAX ChasControlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index."
INDEX { entPhysicalIndex }
::= { chasControlModuleTable 1 }
ChasControlModuleEntry ::= SEQUENCE
{
chasControlRunningVersion INTEGER,
chasControlActivateTimeout INTEGER,
chasControlVersionMngt INTEGER,
chasControlDelayedActivateTimer Unsigned32,
chasControlCertifyStatus INTEGER,
chasControlSynchronizationStatus INTEGER,
chasControlAcrossCmmWorkingSynchroStatus INTEGER,
chasControlAcrossCmmCertifiedSynchroStatus INTEGER
}
chasControlRunningVersion OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
working(2),
certified(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of the Running Version (or Running Configuration) for
the control module. Note that the Running Version value of (1) unknown,
(2) working, or (3) certified is returned."
::= { chasControlModuleEntry 1 }
chasControlActivateTimeout OBJECT-TYPE
SYNTAX INTEGER (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli command.
An Activate reboot must be initiated via the primary CMM and that
the timeout value can be accessed via user interface to the primary CMM
only. After the Activate reboot has been initiated, a timeout will occur
(i.e., an Activate Timeout) at the timeout value specified by the user.
If a reboot cancel has not been received prior to the timeout expiration,
the primary CMM will automatically reboot (i.e., re-reboot) using the
certified configuration. This ensures that an automatic backup reboot is
available using the certified configuration in the event that the user
is unable to interface with primary CMM as a result of the attempted
Activate reboot. If the Activate reboot is successful, the user cancels
the backup reboot via the normal reboot cancellation process (i.e., a
zero value is written for the object chasControlDelayedRebootTimer)."
::= { chasControlModuleEntry 2 }
chasControlVersionMngt OBJECT-TYPE
SYNTAX INTEGER
{
notSignificant(1),
certifySynchro(2),
certifyNoSynchro(3),
flashSynchro(4),
restore(5),
activate(6),
issu(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the primary to the secondary
(reboot of the secondary).
certifyNoSynchro - Copy the file from the working to the certified
directory.
flashSynchro - Copy the file from the primary to the secondary
(reboot of the secondary).
restore - Copy the file from the certified directory to the
working directory.
activate - Reload from the working directory. Activate can be
scheduled.
issu - In Service Software Upgrade (ISSU). Process can
scheduled."
::= { chasControlModuleEntry 3 }
chasControlDelayedActivateTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..31622400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following expiration of the specified activate timer delay.
Writing this object to zero results in an immediately activate process.
It is now adjusted to wait a maximum of 366 days."
::= { chasControlModuleEntry 4 }
chasControlCertifyStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
needCertify(2),
certified(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the control module has been certified
(that is the working directory matches the certified directory)"
::= { chasControlModuleEntry 5 }
chasControlSynchronizationStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoControlModule(2),
notSynchronized(3),
synchronized(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the control module has been synchronized
(that is the working directory matches the working directory
on the other control module(s) if present). Returned value is
monoControlModule when no other control module is present."
::= { chasControlModuleEntry 6 }
chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoCMM(2),
no(3),
yes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the /working has been synchronized
across the CMMs (that is the working directory matches the working directory
on all CMMs if present)"
::= { chasControlModuleEntry 7 }
chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoCMM(2),
no(3),
yes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the /certified has been synchronized
across the CMMs if present)"
::= { chasControlModuleEntry 8 }
-- CONTROL REDUNDANT TABLE
chasControlRedundantTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlRedundantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per control module. There is always at least
one control module in the system."
::= { alcatelIND1ChassisMIBObjects 2 }
chasControlRedundantEntry OBJECT-TYPE
SYNTAX ChasControlRedundantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particular Index."
INDEX { entPhysicalIndex }
::= { chasControlRedundantTable 1 }
ChasControlRedundantEntry ::= SEQUENCE
{
chasControlNumberOfTakeover Counter32,
chasControlDelayedRebootTimer Unsigned32
}
chasControlNumberOfTakeover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a count of the number of times the control module has
changed from primary to secondary mode as a result of a Takeover. Note
that this object can be accessed via user interface to either the
primary or secondary CMM. The value returned is the number of times
that the interfacing control module (either primary or secondary CMM)
has changed from primary to secondary mode. This value does not reflect
the total number of CMM Takeovers for the switch. To get the total
number of Takeovers for the switch, it is necessary to read this value
via user interface to each control module independently."
::= { chasControlRedundantEntry 1 }
chasControlDelayedRebootTimer OBJECT-TYPE
SYNTAX Unsigned32 (0.. 31622400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer value (in seconds) used to initiate a delayed reboot of the primary
or secondary CMM using the certified configuration. Writing this object to
a non-zero value results in a CMM reboot following expiration of the
specified reset timer delay. Writing this object to zero results in
cancellation of a pending CMM delayed reboot.
It is now adjusted to wait a maximum of 366 days."
::= { chasControlRedundantEntry 2 }
-- CHASSIS TABLE
chasChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per chassis. There is always at least one
chassis or many like for stackable product."
::= { alcatelIND1ChassisMIBObjects 3 }
chasChassisEntry OBJECT-TYPE
SYNTAX ChasChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particular Index."
INDEX { entPhysicalIndex }
::= { chasChassisTable 1 }
ChasChassisEntry ::= SEQUENCE
{
chasFreeSlots Unsigned32,
chasPowerLeft INTEGER,
chasNumberOfResets Counter32,
chasHardwareBoardTemp INTEGER,
chasHardwareCpuTemp INTEGER,
chasTempRange INTEGER,
chasTempThreshold INTEGER,
chasDangerTempThreshold INTEGER,
chasPrimaryPhysicalIndex INTEGER
}
chasFreeSlots OBJECT-TYPE
SYNTAX Unsigned32 (0..18)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of free NI front panel slots."
::= { chasChassisEntry 1 }
chasPowerLeft OBJECT-TYPE
SYNTAX INTEGER (-100000..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power still available on the chassis in Watts."
::= { chasChassisEntry 2 }
chasNumberOfResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a count of the number of times this station has been reset
since a cold-start."
::= { chasChassisEntry 3 }
chasHardwareBoardTemp OBJECT-TYPE
SYNTAX INTEGER (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for this chassis.
This temperature is what is used for comparing to the threshold and
determining whether the value is in range."
::= { chasChassisEntry 4 }
chasHardwareCpuTemp OBJECT-TYPE
SYNTAX INTEGER (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the SPARC Temperature
Sensor (degrees Centigrade) for this chassis.
This object is not applicable for Hawk and 0 is returned"
::= { chasChassisEntry 5 }
chasTempRange OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
notPresent(2),
underThreshold(3),
overFirstThreshold(4),
overDangerThreshold(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temp Range is the value of the temperature sensor for the chassis. The
Temp Range value reflects the temperature of the chassis relative to the
Temp Threshold value (i.e., over vs. under the threshold)."
::= { chasChassisEntry 6 }
chasTempThreshold OBJECT-TYPE
SYNTAX INTEGER (1..150)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the threshold temperature in degrees Celsius for the
chassis. Temp Threshold is the chassis temperature point at which,
when reached due to an ascending or descending temperature transition,
a temperature notification is provided to the user. When this threshold
is exceeded, we start sending traps and other operator notification."
::= { chasChassisEntry 7 }
chasDangerTempThreshold OBJECT-TYPE
SYNTAX INTEGER (30..150)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Threshold is a second one which is hardcoded. When the
Chassis Exceeds this value it starts shutting down NIs.
This value will be set by the factory and not changeable."
::= { chasChassisEntry 8 }
chasPrimaryPhysicalIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value holds the Entity Table Physical Index for the Control
Module that is currently primary. This is to allow snmp managers
to determine which Control Module is currently primary so it knows
what entry in the chasControlModuleTable to access for setting the
chasControlVersionMngt values for controling the switch."
::= { chasChassisEntry 9 }
-- Extension of the Entity physical table
chasEntPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical entity. It is an extension for
the entity physical table (rfc 2737) that is instantiated for every physical entity
object. The fields are not always significant for every object."
::= { alcatelIND1ChassisPhysMIBObjects 1 }
chasEntPhysicalEntry OBJECT-TYPE
SYNTAX ChasEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical entity."
INDEX { entPhysicalIndex }
::= { chasEntPhysicalTable 1 }
ChasEntPhysLed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for physical LEDs. Note: Due to European regulation, the LEDs
will never be illuminated in red, but will be either green or amber."
SYNTAX INTEGER {
notApplicable (0),
off (1),
greenOn (2),
greenBlink (3),
amberOn (4),
amberBlink (5)
}
ChasEntPhysPowerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for type of power supply."
SYNTAX INTEGER {
notApplicable (0), -- entPhysicalClass for this physical entity
-- is not powerSupply.
ac (1), -- Power Supply is AC
dc (2) -- Power Supply is DC
}
ChasEntPhysicalEntry ::= SEQUENCE
{
chasEntPhysAdminStatus INTEGER,
chasEntPhysOperStatus INTEGER,
chasEntPhysLedStatus BITS,
chasEntPhysPower INTEGER,
chasEntPhysModuleType SnmpAdminString,
chasEntPhysMfgDate SnmpAdminString,
chasEntPhysPartNumber SnmpAdminString,
chasEntPhysLedStatusOk1 ChasEntPhysLed,
chasEntPhysLedStatusOk2 ChasEntPhysLed,
chasEntPhysLedStatusPrimaryCMM ChasEntPhysLed,
chasEntPhysLedStatusSecondaryCMM ChasEntPhysLed,
chasEntPhysLedStatusTemperature ChasEntPhysLed,
chasEntPhysLedStatusFan ChasEntPhysLed,
chasEntPhysLedStatusFan1 ChasEntPhysLed,
chasEntPhysLedStatusFan2 ChasEntPhysLed,
chasEntPhysLedStatusFan3 ChasEntPhysLed,
chasEntPhysLedStatusBackupPS ChasEntPhysLed,
chasEntPhysLedStatusInternalPS ChasEntPhysLed,
chasEntPhysLedStatusControl ChasEntPhysLed,
chasEntPhysLedStatusFabric ChasEntPhysLed,
chasEntPhysLedStatusPSU ChasEntPhysLed,
chasEntPhysAsicRev SnmpAdminString,
chasEntPhysCpldRev SnmpAdminString,
chasEntPhysDefaultMinibootRev SnmpAdminString,
chasEntPhysBackUpMinibootRev SnmpAdminString,
chasEntPhysBootromRev SnmpAdminString,
chasEntPhysNiNum INTEGER,
chasEntPhysGbicNum INTEGER,
chasEntPhysWaveLen INTEGER,
chasEntPhysUbootRev SnmpAdminString,
chasEntPhysUbootMinibootRev SnmpAdminString,
chasEntPhysMacAddress MacAddress,
chasEntPhysPoeSwVersion SnmpAdminString,
chasEntPhysC20LFailCont INTEGER,
chasEntPhysCpuModel SnmpAdminString,
chasEntPhysPowerType ChasEntPhysPowerType,
chasEntPhysPowerControlChecksum SnmpAdminString
}
chasEntPhysAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
powerOff(2),
powerOn(3),
reset(4),
takeover(5),
resetAll(6),
standby(7),
resetWithFabric(8),
takeoverWithFabrc(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value:
powerOn <=> powered up
Control Module possible value:
powerOn <=> CM up and running
reset <=> CM reset
takeover <=> Secondary CM takes over
resetAll <=> resets the whole switch
NI status possible value:
powerOn <=> NI is either powered (up or down) or waiting to be powered
whenever more power is available. This admin status has not full meaning
without chasEntPhysOperStatus
powerOff <=> NI down and unpowered and NI will not be powered until user
requests it, a failover happens or a reboot happens
reset <=> NI reset
FABRIC status possible value:
powerOn <=> FABRIC is powered
powerOff <=> FABRIC is unpowered
standby <=> FABRIC is powered and requested to be redundant (inactive)
Daughter board status possible value:
powerOn <=> DB up and running
reset <=> DB reset (TO BE CONFIRMED)
Power supply status possible value:
powerOn <=> PS up"
::= { chasEntPhysicalEntry 1 }
chasEntPhysOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3),
unknown(4),
secondary(5),
notPresent(6),
unpowered(7),
master(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value :
up <=> powered up
Control Module possible value :
notPresent <=> CM not present
up <=> CM up and running
down <=> CM down and powered
secondary <=> CM in secondary mode and running
NI status possible value :
notPresent <=> NI not present
up <=> NI up and running
down <=> NI down and powered
unpowered <=> NI unpowered because there is not enough power in the system
(chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
(chasEntPhysAdminStatus = powerOff). This operational status has
not full meaning without chasEntPhysAdminStatus
Fabric status possible value :
master <=> up and acting as master
up <=> up and acting as slave
secondary <=> secondary mode for redundancy
Daughter board status possible value :
notPresent <=> DB not present
up <=> DB up and running
down <=> DB down and powered
Power supply status possible value :
notPresent <=> PS not present
up <=> PS up"
::= { chasEntPhysicalEntry 2 }
chasEntPhysLedStatus OBJECT-TYPE
SYNTAX BITS {
ok1GreenLSBit(0),
ok1GreenMSBit(1),
ok1AmberLSBit(2),
ok1AmberMSBit(3),
ok2GreenLSBit(4),
ok2GreenMSBit(5),
ok2AmberLSBit(6),
ok2AmberMSBit(7),
controlGreenLSBit(8),
controlGreenMSBit(9),
controlAmberLSBIt(10),
controlAmberMSBIt(11),
fabricGreenLSBit(12),
fabricGreenMSBit(13),
fabricAmberLSBit(14),
fabricAmberMSBit(15),
tempGreenLSBit(16),
tempGreenMSBit(17),
tempAmberLSBit(18),
tempAmberMSBit(19),
fanGreenLSBit(20),
fanGreenMSBit(21),
fanAmberLSBit(22),
fanAmberMSBit(23),
powerSupGreenLSBit(24),
powerSupGreenMSBit(25),
powerSupAmberLSBit(26),
powerSupAmberMSBit(27),
backupPowerSupGreenLSBit(28),
backupPowerSupGreenMSBit(29),
backupPowerSupAmberLSBit(30),
backupPowerSupAmberMSBit(31)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object has been deprecated because the other enumerated objects can provide the same information.
A get to this object will return 0.
The status of each of the LEDs of this module.
Fuji CFM:
[31:30] BPSU amber 00=off 01=on 10=reserved 11=blinking
[29:28] PSU green 00=off 01=on 10=reserved 11=blinking
[27:26] PSU amber 00=off 01=on 10=reserved 11=blinking
[25:24] PSU green 00=off 01=on 10=reserved 11=blinking
[23:22] Fan amber 00=off 01=on 10=reserved 11=blinking
[21:20] Fan green 00=off 01=on 10=reserved 11=blinking
[19:18] Temp amber 00=off 01=on 10=reserved 11=blinking
[17:16] Temp green 00=off 01=on 10=reserved 11=blinking
[15:14] Fabric amber 00=off 01=on 10=reserved 11=blinking
[13:12] Fabric green 00=off 01=on 10=reserved 11=blinking
[11:10] Control amber 00=off 01=on 10=reserved 11=blinking
[9:8] Control green 00=off 01=on 10=reserved 11=blinking
[7:6] OK2 amber 00=off 01=on 10=reserved 11=blinking
[5:4] OK2 green 00=off 01=on 10=reserved 11=blinking
[3:2] OK1 amber 00=off 01=on 10=reserved 11=blinking
[1:0] OK1 green 00=off 01=on 10=reserved 11=blinking
Falcon CMM:
[11] Fan 1=Green (ok) 0=amber (fail)
[10] Temperature 1=Green (ok) 0=amber (fail)
[9] Secondary CMM 1=amber 0=OFF
[8] Primary CMM 1=amber 0=OFF
[7:6] OK2 amber 00=off 01=on 10=blink 11=reserved
[5:4] OK2 green 00=off 01=on 10=blink 11=reserved
[3:2] OK1 amber 00=off 01=on 10=blink 11=reserved
[1:0] OK1 green 00=off 01=on 10=blink 11=reserved
Eagle CMM:
[17:16] Fan 3 (rear) 00=amber 01=green 10=blink 11=reserved
[15:14] Fan 2 (top right) 00=amber 01=green 10=blink 11=reserved
[13:12] Fan 1 (top left) 00=amber 01=green 10=blink 11=reserved
[11] Status 1=Green (ok) 0=amber (fail)
[10] Temperature 1=Green (ok) 0=amber (fail)
[9] Secondary CMM 1=amber 0=OFF
[8] Primary CMM 1=amber 0=OFF
[7:6] OK2 amber 00=off 01=on 10=blink 11=reserved
[5:4] OK2 green 00=off 01=on 10=blink 11=reserved
[3:2] OK1 amber 00=off 01=on 10=blink 11=reserved
[1:0] OK1 green 00=off 01=on 10=blink 11=reserved
Hawk Stack:
[19] fanGroup 1=Green (ok) 0=amber (fail)
[18] internalPS 1=Green (ok) 0=amber (fail)
[11] backupPS 1=Green (ok) 0=amber (fail)
[10] Temperature 1=Green (ok) 0=amber (fail)
[9] Secondary CMM 1=amber 0=OFF
[8] Primary CMM 1=amber 0=OFF
[7:6] OK2 amber 00=off 01=on 10=blink 11=reserved
[5:4] OK2 green 00=off 01=on 10=blink 11=reserved
[3:2] OK1 amber 00=off 01=on 10=blink 11=reserved
[1:0] OK1 green 00=off 01=on 10=blink 11=reserved
NI:
[7:6] OK2 amber 00=off 01=on 10=blink 11=reserved
[5:4] OK2 green 00=off 01=on 10=blink 11=reserved
[3:2] OK1 amber 00=off 01=on 10=blink 11=reserved
[1:0] OK1 green 00=off 01=on 10=blink 11=reserved
FABRIC (Eagle Only):
[7:6] OK2 Yellow LED 01=on 00=off 10=blink 11=reserved
[5:4] OK2 Green LED 01=on 00=off 10=blink 11=reserved
[3:2] OK1 Yellow LED 01=on 00=off 10=blink 11=reserved
[1:0] OK1 Green LED 01=on 00=off 10=blink 11=reserved
NOTE: Due to European regulation, the LEDs will NEVER be illuminated RED!
They in fact will be either green OR amber."
::= { chasEntPhysicalEntry 3 }
chasEntPhysPower OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI, PS and Control Modules. It
corresponds to a a static value for the power consumption of an NI
module or Control Module. This value is in Watts."
::= { chasEntPhysicalEntry 4 }
chasEntPhysModuleType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the unique Module Type or ID from the entities eeprom.
This value is guarrantteed to be unique to each type of Module.
This value is only intended for Alcatel internal use."
::= { chasEntPhysicalEntry 5 }
chasEntPhysMfgDate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the manufacturing date of the entity.
Its format is mmm dd yyyy : NOV 27 2001."
::= { chasEntPhysicalEntry 6 }
chasEntPhysPartNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Alcatel Part Number for the entity.
This value is used to identify what is
needed when placing orders with Alcatel."
::= { chasEntPhysicalEntry 7 }
chasEntPhysLedStatusOk1 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED OK1 status indication"
::= { chasEntPhysicalEntry 8 }
chasEntPhysLedStatusOk2 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED OK2 status indication"
::= { chasEntPhysicalEntry 9 }
chasEntPhysLedStatusPrimaryCMM OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED Primary chassis indication"
::= { chasEntPhysicalEntry 10 }
chasEntPhysLedStatusSecondaryCMM OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED Secondary chassis indication"
::= { chasEntPhysicalEntry 11 }
chasEntPhysLedStatusTemperature OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED temperature status indication"
::= { chasEntPhysicalEntry 12 }
chasEntPhysLedStatusFan OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Hawk stacks used as a fan group status LED. For eagle CMM's user instead:
Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)"
::= { chasEntPhysicalEntry 13 }
chasEntPhysLedStatusFan1 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan status, Eagle (top left), Fuji (top right)"
::= { chasEntPhysicalEntry 14 }
chasEntPhysLedStatusFan2 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan status, Eagle (top right), Fuji (middle right)"
::= { chasEntPhysicalEntry 15 }
chasEntPhysLedStatusFan3 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan status, Eagle (rear), Fuji (bottom right)"
::= { chasEntPhysicalEntry 16 }
chasEntPhysLedStatusBackupPS OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis backup power supply status indication"
::= { chasEntPhysicalEntry 17 }
chasEntPhysLedStatusInternalPS OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis internal power supply status indication"
::= { chasEntPhysicalEntry 18 }
chasEntPhysLedStatusControl OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis control status"
::= { chasEntPhysicalEntry 19 }
chasEntPhysLedStatusFabric OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) Fabric status indication"
::= { chasEntPhysicalEntry 20 }
chasEntPhysLedStatusPSU OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Power Supply Unit status indication"
::= { chasEntPhysicalEntry 21 }
chasEntPhysAsicRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 22 }
chasEntPhysCpldRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the CPLD revision Number of the ni entity"
::= { chasEntPhysicalEntry 23 }
chasEntPhysDefaultMinibootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the default miniboot version Number of the ni entity"
::= { chasEntPhysicalEntry 24 }
chasEntPhysBackUpMinibootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the backup miniboot version Number of the ni entity"
::= { chasEntPhysicalEntry 25 }
chasEntPhysBootromRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the bootrom version Number of the ni entity"
::= { chasEntPhysicalEntry 26 }
chasEntPhysNiNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI. It indicates an NI associated with this physicalEntry"
::= { chasEntPhysicalEntry 27 }
chasEntPhysGbicNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI. It indicates a gbic associated with this ni"
::= { chasEntPhysicalEntry 28 }
chasEntPhysWaveLen OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the wave length of a SFP device"
::= { chasEntPhysicalEntry 29 }
chasEntPhysUbootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the uboot version Number of the ni entity"
::= { chasEntPhysicalEntry 30 }
chasEntPhysUbootMinibootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the uboot miniboot version Number of the ni entity"
::= { chasEntPhysicalEntry 31 }
chasEntPhysMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address of the ni entity"
::= { chasEntPhysicalEntry 32 }
chasEntPhysPoeSwVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the POE SW Revision of the ni entity"
::= { chasEntPhysicalEntry 33 }
chasEntPhysC20LFailCont OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the C20L upgrade failure count of the ni entity"
::= { chasEntPhysicalEntry 34 }
chasEntPhysCpuModel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the model description of the cmm/ni cpu"
::= { chasEntPhysicalEntry 35 }
chasEntPhysPowerType OBJECT-TYPE
SYNTAX ChasEntPhysPowerType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type(AC/DC) of power supply."
::= { chasEntPhysicalEntry 36 }
chasEntPhysPowerControlChecksum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the power control checksum."
::= { chasEntPhysicalEntry 37 }
-- CHASSIS SUPERVISION RFS TABLES
chasSupervisionRfsLsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of file on the remote chassis per directory."
::= { alcatelIND1ChassisMIBObjects 4 }
chasSupervisionRfsLsEntry OBJECT-TYPE
SYNTAX ChasSupervisionRfsLsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a remote file.
A row in this table contains a file per directory per chassis"
INDEX { chasSupervisionRfsLsFileIndex }
::= { chasSupervisionRfsLsTable 1 }
ChasSupervisionRfsLsEntry ::= SEQUENCE
{
chasSupervisionRfsLsFileIndex INTEGER,
chasSupervisionRfsLsSlot Unsigned32,
chasSupervisionRfsLsDirName DisplayString (SIZE (0..255)),
chasSupervisionRfsLsFileName DisplayString (SIZE (0..33)),
chasSupervisionRfsLsFileType INTEGER,
chasSupervisionRfsLsFileSize Unsigned32,
chasSupervisionRfsLsFileAttr INTEGER,
chasSupervisionRfsLsFileDateTime DisplayString (SIZE (0..16))
}
chasSupervisionRfsLsFileIndex OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value holds file Index for the RFS LS table."
::= { chasSupervisionRfsLsEntry 1}
chasSupervisionRfsLsSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot where remote file is located."
::= { chasSupervisionRfsLsEntry 2}
chasSupervisionRfsLsDirName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote directory name where remote file is located in"
DEFVAL { "/flash" }
::= { chasSupervisionRfsLsEntry 3 }
chasSupervisionRfsLsFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..33))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file name of remote file"
DEFVAL { "" }
::= { chasSupervisionRfsLsEntry 4 }
chasSupervisionRfsLsFileType OBJECT-TYPE
SYNTAX INTEGER {
file(1),
directory(2),
undefined(3),
tarArchive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Type of a remote file"
DEFVAL { undefined }
::= { chasSupervisionRfsLsEntry 5 }
chasSupervisionRfsLsFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "size of this remote file"
DEFVAL { 0 }
::= { chasSupervisionRfsLsEntry 6 }
chasSupervisionRfsLsFileAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "attributes of this remote file"
DEFVAL { undefined }
::= { chasSupervisionRfsLsEntry 7 }
chasSupervisionRfsLsFileDateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the modification date and time of a remote file"
DEFVAL { "" }
::= { chasSupervisionRfsLsEntry 8 }
chasSupervisionRfsDfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains information about file system size and use."
::= { alcatelIND1ChassisMIBObjects 8 }
chasSupervisionRfsDfEntry OBJECT-TYPE
SYNTAX ChasSupervisionRfsDfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This entry contains information about file system size and use."
INDEX { chasSupervisionRfsDfSlot }
::= { chasSupervisionRfsDfTable 1 }
ChasSupervisionRfsDfEntry ::= SEQUENCE
{
chasSupervisionRfsDfSlot INTEGER,
chasSupervisionRfsDfFlashFree Unsigned32,
chasSupervisionRfsDfFlashSize Unsigned32
}
chasSupervisionRfsDfSlot OBJECT-TYPE
SYNTAX INTEGER
{
slot1Flash(1),
slot2Flash(2),
slot3Flash(3),
slot4Flash(4),
slot5Flash(5),
slot6Flash(6),
slot7Flash(7),
slot8Flash(8),
slot9Flash(9),
slot10Flash(10),
slot11Flash(11),
slot12Flash(12),
slot13Flash(13),
slot14Flash(14),
slot15Flash(15),
slot16Flash(16),
slot1Uflash(17),
slot2Uflash(18),
slot3Uflash(19),
slot4Uflash(20),
slot5Uflash(21),
slot6Uflash(22),
slot7Uflash(23),
slot8Uflash(24),
slot9Uflash(25),
slot10Uflash(26),
slot11Uflash(27),
slot12Uflash(28),
slot13Uflash(29),
slot14Uflash(30),
slot15Uflash(31),
slot16Uflash(32)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where flash space is evaluated.
Slot index 1-16 will return slot 1-16 flash drive information.
Slot index 17-32 will return slot 1-16 uflash drive information."
::= { chasSupervisionRfsDfEntry 1}
chasSupervisionRfsDfFlashFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number bytes free on the file system."
::= { chasSupervisionRfsDfEntry 2}
chasSupervisionRfsDfFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total bytes on the file system."
::= { chasSupervisionRfsDfEntry 3}
chasSupervisionFlashMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the systems flash memory information."
::= { alcatelIND1ChassisMIBObjects 9 }
chasSupervisionFlashMemEntry OBJECT-TYPE
SYNTAX ChasSupervisionFlashMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This contains one entry for the flash memory table."
INDEX { chasSupervisionSlot }
::= { chasSupervisionFlashMemTable 1 }
ChasSupervisionFlashMemEntry ::= SEQUENCE
{
chasSupervisionSlot INTEGER,
chasSupervisionFlashSize Unsigned32,
chasSupervisionFlashFree Unsigned32,
chasSupervisionFlashUsed INTEGER
}
chasSupervisionSlot OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where flash space is evaluated."
::= { chasSupervisionFlashMemEntry 1}
chasSupervisionFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flash memory size."
::= { chasSupervisionFlashMemEntry 2}
chasSupervisionFlashFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number bytes free on file system."
::= { chasSupervisionFlashMemEntry 3}
chasSupervisionFlashUsed OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A rounded up percentage of Flash Memory used."
::= { chasSupervisionFlashMemEntry 4}
chasSupervisionCmmCertifiedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains..."
::= { alcatelIND1ChassisMIBObjects 10 }
chasSupervisionCmmCertifiedEntry OBJECT-TYPE
SYNTAX ChasSupervisionCmmCertifiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about..."
INDEX { chasSupervisionCmmNum }
::= { chasSupervisionCmmCertifiedTable 1 }
ChasSupervisionCmmCertifiedEntry ::= SEQUENCE
{
chasSupervisionCmmNum INTEGER,
chasSupervisionCmmCertifiedStatus INTEGER
}
chasSupervisionCmmNum OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where /certified directory is evaluated."
::= { chasSupervisionCmmCertifiedEntry 1}
chasSupervisionCmmCertifiedStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(0),
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the CMM certified directory - certified or not."
::= { chasSupervisionCmmCertifiedEntry 2}
-- CHASSIS SUPERVISION FAN STATUS TABLE
alaChasEntPhysFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasEntPhysFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical fan entity."
::= { alcatelIND1ChassisMIBObjects 11 }
alaChasEntPhysFanEntry OBJECT-TYPE
SYNTAX AlaChasEntPhysFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular fan in a chassis physical entity."
INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex }
::= { alaChasEntPhysFanTable 1 }
AlaChasEntPhysFanEntry ::= SEQUENCE
{
alaChasEntPhysFanLocalIndex INTEGER,
alaChasEntPhysFanStatus INTEGER
}
alaChasEntPhysFanLocalIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to a chassis fan entity"
::={ alaChasEntPhysFanEntry 1 }
alaChasEntPhysFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
noStatus(0),
notRunning(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan operational status"
::={alaChasEntPhysFanEntry 2}
-- CHASSIS SUPERVISION HASH CONTROL GLOBAL OBJECTS
alaChasHashMode OBJECT-TYPE
SYNTAX INTEGER
{
brief(1),
extended(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to brief, Hash mode is enabled.
When set to Extended, Hash mode is disabled."
DEFVAL { extended }
::= { alcatelIND1ChassisMIBObjects 12 }
alaChasUdpTcpPortMode OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control is used to enable or disable UDP TCP
port hashing. This option is applicable only when
Hash mode is set to disabled (i.e. extended)"
DEFVAL { disabled }
::= { alcatelIND1ChassisMIBObjects 13 }
-- CHASSIS SUPERVISION NON UCAST HASH CONTROL GLOBAL OBJECTS
alaChasNonUCHashControl OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This control is used to enable/disable
Load balance for non unicast traffic."
DEFVAL { disable }
::= { alcatelIND1ChassisMIBObjects 14 }
-- CHASSIS SUPERVISION RFS COMMANDS
alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision RFS commands.
For rrm command the Slot, Command and SrcFileName are mandatory.
For rcp command the Slot, Command, SrcFileName and DestFileName
are mandatory. For rdf command the Slot and Command are mandatory"
::= { alcatelIND1ChassisMIBObjects 5 }
chasSupervisionRfsCommandsSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Slot where RFS command should be executed."
::= { alcatelIND1ChassisSupervisionRfsCommands 1}
chasSupervisionRfsCommandsCommand OBJECT-TYPE
SYNTAX INTEGER {
notSignificant(0),
rrm(1),
rcp(2),
rls(3),
rdf(4),
reserved(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies which of the above Actions is to be
performed. The commands are as follows:
- rrm Remote file remove
- rcp Remote file copy
- rls Remote directory listing
- rdf Remote flash disk space free"
::= { alcatelIND1ChassisSupervisionRfsCommands 2 }
chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote file for where the RFS action is executed.
This includes also the path so directory name and file name.
This object is used when command set to rrm or rcp."
::= { alcatelIND1ChassisSupervisionRfsCommands 3 }
chasSupervisionRfsCommandsDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination file for where the RFS action is executed.
This includes also the path so directory name and file name.
This object is used when command set to rcp."
::= { alcatelIND1ChassisSupervisionRfsCommands 4 }
chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote directory name where remote file is located in.
This is used when command set to rls."
DEFVAL { "/flash" }
::= { alcatelIND1ChassisSupervisionRfsCommands 5 }
chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..33))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote file name where remote file is located in.
This is used when command set to rls."
::= { alcatelIND1ChassisSupervisionRfsCommands 6 }
chasSupervisionRfsCommandsProcessingState OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
ready(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "command executing state for the previous set operation."
::= { alcatelIND1ChassisSupervisionRfsCommands 7 }
chasSupervisionRfsCommandsStatusCode OBJECT-TYPE
SYNTAX INTEGER {
success(1),
slotIsPrimary(2),
slotNotExist(3),
directoryNotExist(4),
fileNotExist(5),
maximumFilesExceed(6),
noDiskSpace(7),
systemBusy(8),
systemError(9),
directoryNotAllowToRemove(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "command completetion status error code."
::= { alcatelIND1ChassisSupervisionRfsCommands 8 }
-- CHASSIS CONTROL RELOAD STATUS
chasControlReloadStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlReloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing reload status of each network interface
slot or stack module"
::= { alcatelIND1ChassisMIBObjects 6 }
chasControlReloadEntry OBJECT-TYPE
SYNTAX ChasControlReloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of a network interface reload status"
INDEX { chasControlReloadIndex }
::={ chasControlReloadStatusTable 1 }
ChasControlReloadEntry ::= SEQUENCE {
chasControlReloadIndex INTEGER,
chasControlReloadStatus INTEGER
}
chasControlReloadIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of a network interface reload status"
::= { chasControlReloadEntry 1 }
chasControlReloadStatus OBJECT-TYPE
SYNTAX INTEGER
{
reloadEnabled(1),
reloadDisabled(2),
noInterface(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the network interface module is
enabled or disabled for reload."
DEFVAL { reloadDisabled }
::= { chasControlReloadEntry 2 }
-- CHASSIS GLOBAL CONTROL OBJECTS
chasGlobalControl OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 }
chasGlobalControlDelayedResetAll OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to schedule a delayed reset all action.
If set to -1 - cancel the timer, 0 - reset all immediately,
any other value will start counting down the time until reset."
DEFVAL { -1 }
::= { chasGlobalControl 1 }
chasGlobalControlLongCommand OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
certifySynchro(2),
certifyNoSynchro(3),
flashSynchro(4),
restore(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate whether a long-term action
is in progress, and if so, what the action is."
DEFVAL { none }
::= { chasGlobalControl 2 }
chasGlobalControlLongCommandStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
inProgress(2),
completeSuccess(3),
completeFailure(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object it indicates the final disposition of the
most recent long-term action."
DEFVAL { none }
::= { chasGlobalControl 3 }
--
--Chassis traps mib : chassisTraps
--
--chassisTraps OBJECT IDENTIFIER ::= { notificationIND1Traps 4 }
--Chassis traps definition
chassisTrapsDesc OBJECT IDENTIFIER ::= { chassisTraps 1 }
chassisTrapsObj OBJECT IDENTIFIER ::= { chassisTraps 2 }
--
--textual conventions
--
ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"enumerated value which provide the
urgency level of the STR."
SYNTAX INTEGER {
strNotFatal (1), --recorverable
strApplicationFatal (2), --not recorverable for the application
strFatal (3) --not recorverable for the board
}
ChassisTrapsStrAppID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Application Identification number"
SYNTAX INTEGER (0..255)
ChassisTrapsStrSnapID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Subapplication Identification number.
we can have multiple snapIDs per
Subapplication (task) but only one is
to be used to send STRs."
SYNTAX INTEGER (0..255)
ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Line number in the source file where the
fault was detected. This is given by the C
ANSI macro __LINE__."
SYNTAX INTEGER (1..65535)
ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Fault identifier. The error number
identifies the kind the detected fault and
allows a mapping of the data contained in
chassisTrapsdataInfo."
SYNTAX INTEGER (0..65535)
ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Additional data provided to help to find out
the origine of the fault. The contain and the
significant portion are varying in accordance
with chassisTrapsStrErrorNb. The lenght of this
field is expressed in bytes."
SYNTAX OCTET STRING (SIZE (0..63))
ChassisTrapsObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which provides the object type
involved in the alert trap."
SYNTAX INTEGER {
chassis (1),
ni (2),
powerSuply (3),
fan (4),
cmm (5),
fabric (6),
gbic (7)
}
ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A number defining the order of the object in the
set. EX: The number of the considered fan or power
supply. This intend to clarify as much as possible
the location of the failure or alert. An instance
of the appearance of the trap could be:
failure on a module. Power supply 3. "
SYNTAX INTEGER (0..255)
ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"this number identify the alert among all the
possible chassis alert causes."
SYNTAX INTEGER {
runningWorking (1), -- The working version is used
runningCertified (2), -- The certified version is used
certifyStarted (3), -- CERTIFY process started
certifyFlashSyncStarted (4), -- CERTIFY w/FLASH SYNCHRO process started
certifyCompleted (5), -- CERTIFY process completed successfully
certifyFailed (6), -- CERTIFY process failed
synchroStarted (7), -- Flash Synchronization process started
synchroCompleted (8), -- Flash Synchronization completed successfully
synchroFailed (9), -- Flash Synchronization failed
restoreStarted (10), -- RESTORE process started
restoreCompleted (11), -- RESTORE process completed successfully
restoreFailed (12), -- RESTORE process failed
takeoverStarted (13), -- CMM take-over being processed
takeoverDeferred (14), -- CMM take-over deferred
takeoverCompleted (15), -- CMM take-over completed
macAllocFailed (16), -- CMS MAC allocation failed
macRangeFailed (17), -- CMS MAC range addition failed
fanFailed (18), -- One or more of the fans is inoperable
fanOk (19), -- Fan is operable
fansOk (20), -- All fans are operable
tempOverThreshold (21), -- CMM temperature over the threshold
tempUnderThreshold (22), -- CMM temperature under the threshold
tempOverDangerThreshold (23), -- CMM temperature over danger threshold
powerMissing (24), -- Not enough power available
psNotOperational (25), -- Power Supply is not operational
psOperational (26), -- Power supply is operational
psAllOperational (27), -- All power supplies are operational
redundancyNotSupported (28), -- Hello protocol disabled, Redundancy not supported
redundancyDisabledCertifyNeeded (29), -- Hello protocol disabled, Certify needed
cmmStartingAsPrimary (30), -- CMM started as primary
cmmStartingAsSecondary (31), -- CMM started as secondary
cmmStartupCompleted (32), -- end of CMM start up
cmmAPlugged (33), -- cmm a plugged
cmmBPlugged (34), -- cmm b plugged
cmmAUnPlugged (35), -- cmm a unplugged
cmmBUnPlugged (36), -- cmm b unplugged
lowNvramBattery (37), -- NV RAM battery is low
notEnoughFabricsOperational (38), -- Not enough Fabric boards operational
simplexNoSynchro (39), -- Only simplex CMM no flash synchro done
secAutoActivate (40), -- secondary CMM autoactivating
secAutoCertifyStarted (41), -- secondary CMM autocertifying
secAutoCertifyCompleted (42), -- secondary CMM autocertify end
secInactiveReset (43), -- cmm b unplugged
activateScheduled (44), -- ACTIVATE process scheduled
activateStarted (45), -- secondary CMM reset because of inactivity
getAfileCompleted (46), -- Get A file process completed
getAfileFailed (47), -- Failed to get a file from other CMM/Stack
sysUpdateStart (48), -- sysUpdate starts
sysUpdateInProgress (49), -- sysUpdate in progress
sysUpdateError (50), -- sysUpdate error
sysUpdateEnd (51), -- sysUpdate ends
reloadInProgress (52), -- the system is already in reload workign process
c20UpgradeOk (53), -- the c20 license upgrade ok
c20UpgradeFailed (54), -- the c20 license upgrade failed
c20RestoreOk (55), -- the c20 license restore ok
c20RestoreFailed (56), -- the c20 license restore failed
c20NiFailed (57) -- the c20 ni board reports failure
}
--
--object i.e. trap description
--
chassisTrapsStr NOTIFICATION-TYPE
OBJECTS {
chassisTrapsStrLevel ,
chassisTrapsStrAppID ,
chassisTrapsStrSnapID ,
chassisTrapsStrfileName ,
chassisTrapsStrfileLineNb ,
chassisTrapsStrErrorNb ,
chassisTrapsStrcomments ,
chassisTrapsStrdataInfo
}
STATUS current
DESCRIPTION
"A Software Trouble report is sent by whatever application
encountering a problem during its execution and would
want to aware the user of for maintenance purpose. "
::= { chassisTrapsDesc 0 1 }
chassisTrapsAlert NOTIFICATION-TYPE
OBJECTS {
physicalIndex ,
chassisTrapsObjectType ,
chassisTrapsObjectNumber ,
chassisTrapsAlertNumber ,
chassisTrapsAlertDescr
}
STATUS current
DESCRIPTION
"generic trap notifying something changed in the chassis
whatever it's a failure or not "
::= { chassisTrapsDesc 0 2 }
chassisTrapsStateChange NOTIFICATION-TYPE
OBJECTS {
physicalIndex ,
chassisTrapsObjectType ,
chassisTrapsObjectNumber ,
chasEntPhysOperStatus
}
STATUS current
DESCRIPTION
"A status change was detected"
::= { chassisTrapsDesc 0 3 }
--
-- objects used in the traps.
--
chassisTrapsStrLevel OBJECT-TYPE
SYNTAX ChassisTrapsStrLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerated value which provides the
urgency level of the STR."
::= {chassisTrapsObj 1}
chassisTrapsStrAppID OBJECT-TYPE
SYNTAX ChassisTrapsStrAppID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application Identification number"
::= {chassisTrapsObj 2}
chassisTrapsStrSnapID OBJECT-TYPE
SYNTAX ChassisTrapsStrSnapID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subapplication Identification number.
we can have multiple snapIDs per
Subapplication (task) but only one is
to be used to send STRs."
::= {chassisTrapsObj 3}
chassisTrapsStrfileName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..19))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the source file where the fault
was detected. This is given by the C ANSI
macro __FILE__. The path shouldn't appear."
::= {chassisTrapsObj 4}
chassisTrapsStrfileLineNb OBJECT-TYPE
SYNTAX ChassisTrapsStrfileLineNb
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line number in the source file where the
fault was detected. This is given by the C
ANSI macro __LINE__."
::= {chassisTrapsObj 5}
chassisTrapsStrErrorNb OBJECT-TYPE
SYNTAX ChassisTrapsStrErrorNb
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault identificator. The error number
identify the kind the detected fault and
allow a mapping of the data contained in
chassisTrapsdataInfo."
::= {chassisTrapsObj 6}
chassisTrapsStrcomments OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"comment text explaning the fault."
::= {chassisTrapsObj 7}
chassisTrapsStrdataInfo OBJECT-TYPE
SYNTAX ChassisTrapsStrdataInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional data provided to help to find out
the origine of the fault. The contain and the
significant portion are varying in accordance
with chassisTrapsStrErrorNb. The lenght of this
field is expressed in bytes."
::= {chassisTrapsObj 8}
chassisTrapsObjectType OBJECT-TYPE
SYNTAX ChassisTrapsObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value which provide the object type
involved in the alert trap."
::= {chassisTrapsObj 9}
chassisTrapsObjectNumber OBJECT-TYPE
SYNTAX ChassisTrapsObjectNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number defining the order of the object in the
set. EX: number of the considered fan or power
supply. This intend to clarify as much as possible
the location of the failure or alert. A instance
of the appearance of the trap could be:
failure on a module. Power supply 3. "
::= {chassisTrapsObj 10}
chassisTrapsAlertNumber OBJECT-TYPE
SYNTAX ChassisTrapsAlertNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this number identify the alert among all the
possible chassis alert causes."
::= {chassisTrapsObj 11}
chassisTrapsAlertDescr OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"description of the alert matching chassisTrapsAlertNumber"
::= {chassisTrapsObj 12}
physicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Physical index of the involved object."
::= { chassisTrapsObj 13 }
-- END Trap Objects
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Chassis Supervision."
MODULE
MANDATORY-GROUPS
{
chasControlModuleGroup ,
chasControlRedundantGroup ,
chasChassisGroup ,
chasControlReloadStatusGroup ,
chasGlobalControlGroup ,
chassisNotificationGroup ,
alaChasEntPhysFanGroup ,
alaChasHashControlGroup
}
::= { alcatelIND1ChassisMIBCompliances 1 }
alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Chassis Supervision Physical."
MODULE
MANDATORY-GROUPS
{
chasEntPhysicalGroup ,
chassisPhysNotificationGroup
}
::= { alcatelIND1ChassisPhysMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
chasControlModuleGroup OBJECT-GROUP
OBJECTS
{
chasControlRunningVersion ,
chasControlActivateTimeout ,
chasControlVersionMngt ,
chasControlDelayedActivateTimer
}
STATUS current
DESCRIPTION
"Chassis Supervision Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 1 }
chasControlRedundantGroup OBJECT-GROUP
OBJECTS
{
chasControlNumberOfTakeover ,
chasControlDelayedRebootTimer
}
STATUS current
DESCRIPTION
"Chassis Supervision Redundant Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 2 }
chasChassisGroup OBJECT-GROUP
OBJECTS
{
chasFreeSlots ,
chasPowerLeft ,
chasNumberOfResets ,
chasHardwareBoardTemp ,
chasHardwareCpuTemp ,
chasTempRange ,
chasTempThreshold ,
chasDangerTempThreshold ,
chasPrimaryPhysicalIndex
}
STATUS current
DESCRIPTION
"Chassis Supervision Chassis Group."
::= { alcatelIND1ChassisMIBGroups 3 }
chasControlReloadStatusGroup OBJECT-GROUP
OBJECTS
{
chasControlReloadStatus
}
STATUS current
DESCRIPTION
"Chassis Supervision NI Reload Status Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 4 }
chasGlobalControlGroup OBJECT-GROUP
OBJECTS
{
chasGlobalControlDelayedResetAll,
chasGlobalControlLongCommand,
chasGlobalControlLongCommandStatus
}
STATUS current
DESCRIPTION
"Chassis Supervision Global Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 5 }
chassisNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
chassisTrapsStr ,
chassisTrapsAlert
}
STATUS current
DESCRIPTION
"Chassis Supervision Notification Group."
::= { alcatelIND1ChassisMIBGroups 6 }
alaChasEntPhysFanGroup OBJECT-GROUP
OBJECTS
{
alaChasEntPhysFanStatus
}
STATUS current
DESCRIPTION
"Chassis Supervision Physical Fan Group."
::= { alcatelIND1ChassisMIBGroups 7 }
alaChasHashControlGroup OBJECT-GROUP
OBJECTS
{
alaChasHashMode,
alaChasUdpTcpPortMode
}
STATUS current
DESCRIPTION
"Chassis Supervision Hash Control Group."
::= { alcatelIND1ChassisMIBGroups 8 }
chasEntPhysicalGroup OBJECT-GROUP
OBJECTS
{
chasEntPhysAdminStatus ,
chasEntPhysOperStatus ,
chasEntPhysLedStatus ,
chasEntPhysPower ,
chasEntPhysModuleType ,
chasEntPhysMfgDate ,
chasEntPhysPartNumber ,
chasEntPhysLedStatusOk1 ,
chasEntPhysLedStatusOk2 ,
chasEntPhysLedStatusPrimaryCMM ,
chasEntPhysLedStatusSecondaryCMM ,
chasEntPhysLedStatusTemperature ,
chasEntPhysLedStatusFan ,
chasEntPhysLedStatusFan1 ,
chasEntPhysLedStatusFan2 ,
chasEntPhysLedStatusFan3 ,
chasEntPhysLedStatusBackupPS ,
chasEntPhysLedStatusInternalPS ,
chasEntPhysLedStatusControl ,
chasEntPhysLedStatusFabric ,
chasEntPhysLedStatusPSU ,
chasEntPhysPowerType ,
chasEntPhysPowerControlChecksum
}
STATUS current
DESCRIPTION
"Chassis (inclosure) Entity Physical Group."
::= { alcatelIND1ChassisPhysMIBGroups 1 }
chassisPhysNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
chassisTrapsStr ,
chassisTrapsAlert ,
chassisTrapsStateChange
}
STATUS current
DESCRIPTION
"Chassis Supervision Physical Notification Group."
::= { alcatelIND1ChassisPhysMIBGroups 2 }
END
Reference in New Issue Copy Permalink